diff options
45 files changed, 3911 insertions, 1597 deletions
diff --git a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt b/Documentation/devicetree/bindings/mtd/aspeed-smc.txt deleted file mode 100644 index 49f6528ef547..000000000000 --- a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt +++ /dev/null @@ -1,51 +0,0 @@ -* Aspeed Firmware Memory controller -* Aspeed SPI Flash Memory Controller - -The Firmware Memory Controller in the Aspeed AST2500 SoC supports -three chip selects, two of which are always of SPI type and the third -can be SPI or NOR type flash. These bindings only describe SPI. - -The two SPI flash memory controllers in the AST2500 each support two -chip selects. - -Required properties: - - compatible : Should be one of - "aspeed,ast2400-fmc" for the AST2400 Firmware Memory Controller - "aspeed,ast2400-spi" for the AST2400 SPI Flash memory Controller - "aspeed,ast2500-fmc" for the AST2500 Firmware Memory Controller - "aspeed,ast2500-spi" for the AST2500 SPI flash memory controllers - - - reg : the first contains the control register location and length, - the second contains the memory window mapping address and length - - #address-cells : must be 1 corresponding to chip select child binding - - #size-cells : must be 0 corresponding to chip select child binding - -Optional properties: - - interrupts : Should contain the interrupt for the dma device if an - FMC - -The child nodes are the SPI flash modules which must have a compatible -property as specified in bindings/mtd/jedec,spi-nor.txt - -Optionally, the child node can contain properties for SPI mode (may be -ignored): - - spi-max-frequency - max frequency of spi bus - - -Example: -fmc: fmc@1e620000 { - compatible = "aspeed,ast2500-fmc"; - reg = < 0x1e620000 0x94 - 0x20000000 0x02000000 >; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <19>; - flash@0 { - reg = < 0 >; - compatible = "jedec,spi-nor"; - /* spi-max-frequency = <>; */ - /* m25p,fast-read; */ - #address-cells = <1>; - #size-cells = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml new file mode 100644 index 000000000000..fa8f4ac20985 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed SMC controllers bindings + +maintainers: + - Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> + - Cédric Le Goater <clg@kaod.org> + +description: | + This binding describes the Aspeed Static Memory Controllers (FMC and + SPI) of the AST2400, AST2500 and AST2600 SOCs. + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - aspeed,ast2600-fmc + - aspeed,ast2600-spi + - aspeed,ast2500-fmc + - aspeed,ast2500-spi + - aspeed,ast2400-fmc + - aspeed,ast2400-spi + + reg: + items: + - description: registers + - description: memory mapping + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h> + #include <dt-bindings/clock/ast2600-clock.h> + + spi@1e620000 { + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-fmc"; + clocks = <&syscon ASPEED_CLK_AHB>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + }; + + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + }; + + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/ingenic,spi.yaml b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml index 5b1c7a2a6a31..360f76c226d9 100644 --- a/Documentation/devicetree/bindings/spi/ingenic,spi.yaml +++ b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml @@ -18,7 +18,10 @@ properties: oneOf: - enum: - ingenic,jz4750-spi + - ingenic,jz4775-spi - ingenic,jz4780-spi + - ingenic,x1000-spi + - ingenic,x2000-spi - items: - enum: - ingenic,jz4760-spi diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml index 818130b11bb9..94ef0552bd42 100644 --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml @@ -53,16 +53,20 @@ properties: maxItems: 1 clocks: + minItems: 3 items: - description: clock used for the parent clock - description: clock used for the muxes clock - description: clock used for the clock gate + - description: clock used for the AHB bus, this clock is optional clock-names: + minItems: 3 items: - const: parent-clk - const: sel-clk - const: spi-clk + - const: hclk mediatek,pad-select: $ref: /schemas/types.yaml#/definitions/uint32-array diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml new file mode 100644 index 000000000000..6e6e02c91780 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-snfi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI-NAND flash controller for MediaTek ARM SoCs + +maintainers: + - Chuanhong Guo <gch981213@gmail.com> + +description: | + The Mediatek SPI-NAND flash controller is an extended version of + the Mediatek NAND flash controller. It can perform standard SPI + instructions with one continuous write and one read for up-to 0xa0 + bytes. It also supports typical SPI-NAND page cache operations + in single, dual or quad IO mode with pipelined ECC encoding/decoding + using the accompanying ECC engine. There should be only one spi + slave device following generic spi bindings. + +allOf: + - $ref: /schemas/spi/spi-controller.yaml# + +properties: + compatible: + enum: + - mediatek,mt7622-snand + - mediatek,mt7629-snand + + reg: + items: + - description: core registers + + interrupts: + items: + - description: NFI interrupt + + clocks: + items: + - description: clock used for the controller + - description: clock used for the SPI bus + + clock-names: + items: + - const: nfi_clk + - const: pad_clk + + nand-ecc-engine: + description: device-tree node of the accompanying ECC engine. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - nand-ecc-engine + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt7622-clk.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + snfi: spi@1100d000 { + compatible = "mediatek,mt7622-snand"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>; + clock-names = "nfi_clk", "pad_clk"; + nand-ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + nand-ecc-engine = <&snfi>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 5a60fba14bba..44d08aa3fd85 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -49,6 +49,7 @@ properties: maxItems: 2 interconnect-names: + minItems: 1 items: - const: qspi-config - const: qspi-memory diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml index 2c3c6bd6ec45..f45d3b75d6de 100644 --- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml @@ -21,6 +21,7 @@ properties: - enum: - renesas,rspi-r7s72100 # RZ/A1H - renesas,rspi-r7s9210 # RZ/A2 + - renesas,r9a07g043-rspi # RZ/G2UL - renesas,r9a07g044-rspi # RZ/G2{L,LC} - renesas,r9a07g054-rspi # RZ/V2L - const: renesas,rspi-rz @@ -124,6 +125,7 @@ allOf: contains: enum: - renesas,qspi + - renesas,r9a07g043-rspi - renesas,r9a07g044-rspi - renesas,r9a07g054-rspi then: diff --git a/MAINTAINERS b/MAINTAINERS index 1ac45caa2dcd..4ec3ddf5251f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3102,6 +3102,16 @@ S: Maintained F: Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml F: drivers/mmc/host/sdhci-of-aspeed* +ASPEED SMC SPI DRIVER +M: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> +M: Cédric Le Goater <clg@kaod.org> +L: linux-aspeed@lists.ozlabs.org (moderated for non-subscribers) +L: openbmc@lists.ozlabs.org (moderated for non-subscribers) +L: linux-spi@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml +F: drivers/spi/spi-aspeed-smc.c + ASPEED VIDEO ENGINE DRIVER M: Eddie James <eajames@linux.ibm.com> L: linux-media@vger.kernel.org diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig index 50f4f3484d42..ca45dcd3ffe8 100644 --- a/drivers/mtd/spi-nor/controllers/Kconfig +++ b/drivers/mtd/spi-nor/controllers/Kconfig @@ -1,14 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -config SPI_ASPEED_SMC - tristate "Aspeed flash controllers in SPI mode" - depends on ARCH_ASPEED || COMPILE_TEST - depends on HAS_IOMEM && OF - help - This enables support for the Firmware Memory controller (FMC) - in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips, - and support for the SPI flash memory controller (SPI) for - the host firmware. The implementation only supports SPI NOR. - config SPI_HISI_SFC tristate "Hisilicon FMC SPI NOR Flash Controller(SFC)" depends on ARCH_HISI || COMPILE_TEST diff --git a/drivers/mtd/spi-nor/controllers/Makefile b/drivers/mtd/spi-nor/controllers/Makefile index 6e2a1dc68466..0b8e1d530913 100644 --- a/drivers/mtd/spi-nor/controllers/Makefile +++ b/drivers/mtd/spi-nor/controllers/Makefile @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o diff --git a/drivers/mtd/spi-nor/controllers/aspeed-smc.c b/drivers/mtd/spi-nor/controllers/aspeed-smc.c deleted file mode 100644 index acfe010f9dd7..000000000000 --- a/drivers/mtd/spi-nor/controllers/aspeed-smc.c +++ /dev/null @@ -1,921 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ASPEED Static Memory Controller driver - * - * Copyright (c) 2015-2016, IBM Corporation. - */ - -#include <linux/bug.h> -#include <linux/device.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/spi-nor.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/sizes.h> -#include <linux/sysfs.h> - -#define DEVICE_NAME "aspeed-smc" - -/* - * The driver only support SPI flash - */ -enum aspeed_smc_flash_type { - smc_type_nor = 0, - smc_type_nand = 1, - smc_type_spi = 2, -}; - -struct aspeed_smc_chip; - -struct aspeed_smc_info { - u32 maxsize; /* maximum size of chip window */ - u8 nce; /* number of chip enables */ - bool hastype; /* flash type field exists in config reg */ - u8 we0; /* shift for write enable bit for CE0 */ - u8 ctl0; /* offset in regs of ctl for CE0 */ - - void (*set_4b)(struct aspeed_smc_chip *chip); -}; - -static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip); -static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip); - -static const struct aspeed_smc_info fmc_2400_info = { - .maxsize = 64 * 1024 * 1024, - .nce = 5, - .hastype = true, - .we0 = 16, - .ctl0 = 0x10, - .set_4b = aspeed_smc_chip_set_4b, -}; - -static const struct aspeed_smc_info spi_2400_info = { - .maxsize = 64 * 1024 * 1024, - .nce = 1, - .hastype = false, - .we0 = 0, - .ctl0 = 0x04, - .set_4b = aspeed_smc_chip_set_4b_spi_2400, -}; - -static const struct aspeed_smc_info fmc_2500_info = { - .maxsize = 256 * 1024 * 1024, - .nce = 3, - .hastype = true, - .we0 = 16, - .ctl0 = 0x10, - .set_4b = aspeed_smc_chip_set_4b, -}; - -static const struct aspeed_smc_info spi_2500_info = { - .maxsize = 128 * 1024 * 1024, - .nce = 2, - .hastype = false, - .we0 = 16, - .ctl0 = 0x10, - .set_4b = aspeed_smc_chip_set_4b, -}; - -enum aspeed_smc_ctl_reg_value { - smc_base, /* base value without mode for other commands */ - smc_read, /* command reg for (maybe fast) reads */ - smc_write, /* command reg for writes */ - smc_max, -}; - -struct aspeed_smc_controller; - -struct aspeed_smc_chip { - int cs; - struct aspeed_smc_controller *controller; - void __iomem *ctl; /* control register */ - void __iomem *ahb_base; /* base of chip window */ - u32 ahb_window_size; /* chip mapping window size */ - u32 ctl_val[smc_max]; /* control settings */ - enum aspeed_smc_flash_type type; /* what type of flash */ - struct spi_nor nor; -}; - -struct aspeed_smc_controller { - struct device *dev; - - struct mutex mutex; /* controller access mutex */ - const struct aspeed_smc_info *info; /* type info of controller */ - void __iomem *regs; /* controller registers */ - void __iomem *ahb_base; /* per-chip windows resource */ - u32 ahb_window_size; /* full mapping window size */ - - struct aspeed_smc_chip *chips[]; /* pointers to attached chips */ -}; - -/* - * SPI Flash Configuration Register (AST2500 SPI) - * or - * Type setting Register (AST2500 FMC). - * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the - * driver does not support it. - */ -#define CONFIG_REG 0x0 -#define CONFIG_DISABLE_LEGACY BIT(31) /* 1 */ - -#define CONFIG_CE2_WRITE BIT(18) -#define CONFIG_CE1_WRITE BIT(17) -#define CONFIG_CE0_WRITE BIT(16) - -#define CONFIG_CE2_TYPE BIT(4) /* AST2500 FMC only */ -#define CONFIG_CE1_TYPE BIT(2) /* AST2500 FMC only */ -#define CONFIG_CE0_TYPE BIT(0) /* AST2500 FMC only */ - -/* - * CE Control Register - */ -#define CE_CONTROL_REG 0x4 - -/* - * CEx Control Register - */ -#define CONTROL_AAF_MODE BIT(31) -#define CONTROL_IO_MODE_MASK GENMASK(30, 28) -#define CONTROL_IO_DUAL_DATA BIT(29) -#define CONTROL_IO_DUAL_ADDR_DATA (BIT(29) | BIT(28)) -#define CONTROL_IO_QUAD_DATA BIT(30) -#define CONTROL_IO_QUAD_ADDR_DATA (BIT(30) | BIT(28)) -#define CONTROL_CE_INACTIVE_SHIFT 24 -#define CONTROL_CE_INACTIVE_MASK GENMASK(27, \ - CONTROL_CE_INACTIVE_SHIFT) -/* 0 = 16T ... 15 = 1T T=HCLK */ -#define CONTROL_COMMAND_SHIFT 16 -#define CONTROL_DUMMY_COMMAND_OUT BIT(15) -#define CONTROL_IO_DUMMY_HI BIT(14) -#define CONTROL_IO_DUMMY_HI_SHIFT 14 -#define CONTROL_CLK_DIV4 BIT(13) /* others */ -#define CONTROL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI */ -#define CONTROL_RW_MERGE BIT(12) -#define CONTROL_IO_DUMMY_LO_SHIFT 6 -#define CONTROL_IO_DUMMY_LO GENMASK(7, \ - CONTROL_IO_DUMMY_LO_SHIFT) -#define CONTROL_IO_DUMMY_MASK (CONTROL_IO_DUMMY_HI | \ - CONTROL_IO_DUMMY_LO) -#define CONTROL_IO_DUMMY_SET(dummy) \ - (((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \ - (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT)) - -#define CONTROL_CLOCK_FREQ_SEL_SHIFT 8 -#define CONTROL_CLOCK_FREQ_SEL_MASK GENMASK(11, \ - CONTROL_CLOCK_FREQ_SEL_SHIFT) -#define CONTROL_LSB_FIRST BIT(5) -#define CONTROL_CLOCK_MODE_3 BIT(4) -#define CONTROL_IN_DUAL_DATA BIT(3) -#define CONTROL_CE_STOP_ACTIVE_CONTROL BIT(2) -#define CONTROL_COMMAND_MODE_MASK GENMASK(1, 0) -#define CONTROL_COMMAND_MODE_NORMAL 0 -#define CONTROL_COMMAND_MODE_FREAD 1 -#define CONTROL_COMMAND_MODE_WRITE 2 -#define CONTROL_COMMAND_MODE_USER 3 - -#define CONTROL_KEEP_MASK \ - (CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \ - CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3) - -/* - * The Segment Register uses a 8MB unit to encode the start address - * and the end address of the mapping window of a flash SPI slave : - * - * | byte 1 | byte 2 | byte 3 | byte 4 | - * +--------+--------+--------+--------+ - * | end | start | 0 | 0 | - */ -#define SEGMENT_ADDR_REG0 0x30 -#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23) -#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23) -#define SEGMENT_ADDR_VALUE(start, end) \ - (((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24)) -#define SEGMENT_ADDR_REG(controller, cs) \ - ((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4) - -/* - * In user mode all data bytes read or written to the chip decode address - * range are transferred to or from the SPI bus. The range is treated as a - * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned - * to its size. The address within the multiple 8kB range is ignored when - * sending bytes to the SPI bus. - * - * On the arm architecture, as of Linux version 4.3, memcpy_fromio and - * memcpy_toio on little endian targets use the optimized memcpy routines - * that were designed for well behavied memory storage. These routines - * have a stutter if the source and destination are not both word aligned, - * once with a duplicate access to the source after aligning to the - * destination to a word boundary, and again with a duplicate access to - * the source when the final byte count is not word aligned. - * - * When writing or reading the fifo this stutter discards data or sends - * too much data to the fifo and can not be used by this driver. - * - * While the low level io string routines that implement the insl family do - * the desired accesses and memory increments, the cross architecture io - * macros make them essentially impossible to use on a memory mapped address - * instead of a a token from the call to iomap of an io port. - * - * These fifo routines use readl and friends to a constant io port and update - * the memory buffer pointer and count via explicit code. The final updates - * to len are optimistically suppressed. - */ -static int aspeed_smc_read_from_ahb(void *buf, void __iomem *src, size_t len) -{ - size_t offset = 0; - - if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) && - IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { - ioread32_rep(src, buf, len >> 2); - offset = len & ~0x3; - len -= offset; - } - ioread8_rep(src, (u8 *)buf + offset, len); - return 0; -} - -static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf, - size_t len) -{ - size_t offset = 0; - - if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) && - IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { - iowrite32_rep(dst, buf, len >> 2); - offset = len & ~0x3; - len -= offset; - } - iowrite8_rep(dst, (const u8 *)buf + offset, len); - return 0; -} - -static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip) -{ - return BIT(chip->controller->info->we0 + chip->cs); -} - -static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 reg; - - reg = readl(controller->regs + CONFIG_REG); - - if (reg & aspeed_smc_chip_write_bit(chip)) - return; - - dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n", - controller->regs + CONFIG_REG, reg); - reg |= aspeed_smc_chip_write_bit(chip); - writel(reg, controller->regs + CONFIG_REG); -} - -static void aspeed_smc_start_user(struct spi_nor *nor) -{ - struct aspeed_smc_chip *chip = nor->priv; - u32 ctl = chip->ctl_val[smc_base]; - - /* - * When the chip is controlled in user mode, we need write - * access to send the opcodes to it. So check the config. - */ - aspeed_smc_chip_check_config(chip); - - ctl |= CONTROL_COMMAND_MODE_USER | - CONTROL_CE_STOP_ACTIVE_CONTROL; - writel(ctl, chip->ctl); - - ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL; - writel(ctl, chip->ctl); -} - -static void aspeed_smc_stop_user(struct spi_nor *nor) -{ - struct aspeed_smc_chip *chip = nor->priv; - - u32 ctl = chip->ctl_val[smc_read]; - u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER | - CONTROL_CE_STOP_ACTIVE_CONTROL; - - writel(ctl2, chip->ctl); /* stop user CE control */ - writel(ctl, chip->ctl); /* default to fread or read mode */ -} - -static int aspeed_smc_prep(struct spi_nor *nor) -{ - struct aspeed_smc_chip *chip = nor->priv; - - mutex_lock(&chip->controller->mutex); - return 0; -} - -static void aspeed_smc_unprep(struct spi_nor *nor) -{ - struct aspeed_smc_chip *chip = nor->priv; - - mutex_unlock(&chip->controller->mutex); -} - -static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, - size_t len) -{ - struct aspeed_smc_chip *chip = nor->priv; - - aspeed_smc_start_user(nor); - aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); - aspeed_smc_read_from_ahb(buf, chip->ahb_base, len); - aspeed_smc_stop_user(nor); - return 0; -} - -static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf, - size_t len) -{ - struct aspeed_smc_chip *chip = nor->priv; - - aspeed_smc_start_user(nor); - aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); - aspeed_smc_write_to_ahb(chip->ahb_base, buf, len); - aspeed_smc_stop_user(nor); - return 0; -} - -static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr) -{ - struct aspeed_smc_chip *chip = nor->priv; - __be32 temp; - u32 cmdaddr; - - switch (nor->addr_width) { - default: - WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n", - nor->addr_width); - fallthrough; - case 3: - cmdaddr = addr & 0xFFFFFF; - cmdaddr |= cmd << 24; - - temp = cpu_to_be32(cmdaddr); - aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); - break; - case 4: - temp = cpu_to_be32(addr); - aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1); - aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); - break; - } -} - -static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from, - size_t len, u_char *read_buf) -{ - struct aspeed_smc_chip *chip = nor->priv; - int i; - u8 dummy = 0xFF; - - aspeed_smc_start_user(nor); - aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from); - for (i = 0; i < chip->nor.read_dummy / 8; i++) - aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy)); - - aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len); - aspeed_smc_stop_user(nor); - return len; -} - -static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to, - size_t len, const u_char *write_buf) -{ - struct aspeed_smc_chip *chip = nor->priv; - - aspeed_smc_start_user(nor); - aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to); - aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len); - aspeed_smc_stop_user(nor); - return len; -} - -static int aspeed_smc_unregister(struct aspeed_smc_controller *controller) -{ - struct aspeed_smc_chip *chip; - int n; - - for (n = 0; n < controller->info->nce; n++) { - chip = controller->chips[n]; - if (chip) - mtd_device_unregister(&chip->nor.mtd); - } - - return 0; -} - -static int aspeed_smc_remove(struct platform_device *dev) -{ - return aspeed_smc_unregister(platform_get_drvdata(dev)); -} - -static const struct of_device_id aspeed_smc_matches[] = { - { .compatible = "aspeed,ast2400-fmc", .data = &fmc_2400_info }, - { .compatible = "aspeed,ast2400-spi", .data = &spi_2400_info }, - { .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info }, - { .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info }, - { } -}; -MODULE_DEVICE_TABLE(of, aspeed_smc_matches); - -/* - * Each chip has a mapping window defined by a segment address - * register defining a start and an end address on the AHB bus. These - * addresses can be configured to fit the chip size and offer a - * contiguous memory region across chips. For the moment, we only - * check that each chip segment is valid. - */ -static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip, - struct resource *res) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 offset = 0; - u32 reg; - - if (controller->info->nce > 1) { - reg = readl(SEGMENT_ADDR_REG(controller, chip->cs)); - - if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg)) - return NULL; - - offset = SEGMENT_ADDR_START(reg) - res->start; - } - - return controller->ahb_base + offset; -} - -static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller) -{ - u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0)); - - return SEGMENT_ADDR_START(seg0_val); -} - -static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start, - u32 size) -{ - struct aspeed_smc_controller *controller = chip->controller; - void __iomem *seg_reg; - u32 seg_oldval, seg_newval, ahb_base_phy, end; - - ahb_base_phy = aspeed_smc_ahb_base_phy(controller); - - seg_reg = SEGMENT_ADDR_REG(controller, cs); - seg_oldval = readl(seg_reg); - - /* - * If the chip size is not specified, use the default segment - * size, but take into account the possible overlap with the - * previous segment - */ - if (!size) - size = SEGMENT_ADDR_END(seg_oldval) - start; - - /* - * The segment cannot exceed the maximum window size of the - * controller. - */ - if (start + size > ahb_base_phy + controller->ahb_window_size) { - size = ahb_base_phy + controller->ahb_window_size - start; - dev_warn(chip->nor.dev, "CE%d window resized to %dMB", - cs, size >> 20); - } - - end = start + size; - seg_newval = SEGMENT_ADDR_VALUE(start, end); - writel(seg_newval, seg_reg); - - /* - * Restore default value if something goes wrong. The chip - * might have set some bogus value and we would loose access - * to the chip. - */ - if (seg_newval != readl(seg_reg)) { - dev_err(chip->nor.dev, "CE%d window invalid", cs); - writel(seg_oldval, seg_reg); - start = SEGMENT_ADDR_START(seg_oldval); - end = SEGMENT_ADDR_END(seg_oldval); - size = end - start; - } - - dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB", - cs, start, end, size >> 20); - - return size; -} - -/* - * The segment register defines the mapping window on the AHB bus and - * it needs to be configured depending on the chip size. The segment - * register of the following CE also needs to be tuned in order to - * provide a contiguous window across multiple chips. - * - * This is expected to be called in increasing CE order - */ -static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 ahb_base_phy, start; - u32 size = chip->nor.mtd.size; - - /* - * Each controller has a chip size limit for direct memory - * access - */ - if (size > controller->info->maxsize) - size = controller->info->maxsize; - - /* - * The AST2400 SPI controller only handles one chip and does - * not have segment registers. Let's use the chip size for the - * AHB window. - */ - if (controller->info == &spi_2400_info) - goto out; - - /* - * The AST2500 SPI controller has a HW bug when the CE0 chip - * size reaches 128MB. Enforce a size limit of 120MB to - * prevent the controller from using bogus settings in the - * segment register. - */ - if (chip->cs == 0 && controller->info == &spi_2500_info && - size == SZ_128M) { - size = 120 << 20; - dev_info(chip->nor.dev, - "CE%d window resized to %dMB (AST2500 HW quirk)", - chip->cs, size >> 20); - } - - ahb_base_phy = aspeed_smc_ahb_base_phy(controller); - - /* - * As a start address for the current segment, use the default - * start address if we are handling CE0 or use the previous - * segment ending address - */ - if (chip->cs) { - u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1)); - - start = SEGMENT_ADDR_END(prev); - } else { - start = ahb_base_phy; - } - - size = chip_set_segment(chip, chip->cs, start, size); - - /* Update chip base address on the AHB bus */ - chip->ahb_base = controller->ahb_base + (start - ahb_base_phy); - - /* - * Now, make sure the next segment does not overlap with the - * current one we just configured, even if there is no - * available chip. That could break access in Command Mode. - */ - if (chip->cs < controller->info->nce - 1) - chip_set_segment(chip, chip->cs + 1, start + size, 0); - -out: - if (size < chip->nor.mtd.size) - dev_warn(chip->nor.dev, - "CE%d window too small for chip %dMB", - chip->cs, (u32)chip->nor.mtd.size >> 20); - - return size; -} - -static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 reg; - - reg = readl(controller->regs + CONFIG_REG); - - reg |= aspeed_smc_chip_write_bit(chip); - writel(reg, controller->regs + CONFIG_REG); -} - -static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 reg; - - chip->type = type; - - reg = readl(controller->regs + CONFIG_REG); - reg &= ~(3 << (chip->cs * 2)); - reg |= chip->type << (chip->cs * 2); - writel(reg, controller->regs + CONFIG_REG); -} - -/* - * The first chip of the AST2500 FMC flash controller is strapped by - * hardware, or autodetected, but other chips need to be set. Enforce - * the 4B setting for all chips. - */ -static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 reg; - - reg = readl(controller->regs + CE_CONTROL_REG); - reg |= 1 << chip->cs; - writel(reg, controller->regs + CE_CONTROL_REG); -} - -/* - * The AST2400 SPI flash controller does not have a CE Control - * register. It uses the CE0 control register to set 4Byte mode at the - * controller level. - */ -static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip) -{ - chip->ctl_val[smc_base] |= CONTROL_IO_ADDRESS_4B; - chip->ctl_val[smc_read] |= CONTROL_IO_ADDRESS_4B; -} - -static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip, - struct resource *res) -{ - struct aspeed_smc_controller *controller = chip->controller; - const struct aspeed_smc_info *info = controller->info; - u32 reg, base_reg; - - /* - * Always turn on the write enable bit to allow opcodes to be - * sent in user mode. - */ - aspeed_smc_chip_enable_write(chip); - - /* The driver only supports SPI type flash */ - if (info->hastype) - aspeed_smc_chip_set_type(chip, smc_type_spi); - - /* - * Configure chip base address in memory - */ - chip->ahb_base = aspeed_smc_chip_base(chip, res); - if (!chip->ahb_base) { - dev_warn(chip->nor.dev, "CE%d window closed", chip->cs); - return -EINVAL; - } - - /* - * Get value of the inherited control register. U-Boot usually - * does some timing calibration on the FMC chip, so it's good - * to keep them. In the future, we should handle calibration - * from Linux. - */ - reg = readl(chip->ctl); - dev_dbg(controller->dev, "control register: %08x\n", reg); - - base_reg = reg & CONTROL_KEEP_MASK; - if (base_reg != reg) { - dev_dbg(controller->dev, - "control register changed to: %08x\n", - base_reg); - } - chip->ctl_val[smc_base] = base_reg; - - /* - * Retain the prior value of the control register as the - * default if it was normal access mode. Otherwise start with - * the sanitized base value set to read mode. - */ - if ((reg & CONTROL_COMMAND_MODE_MASK) == - CONTROL_COMMAND_MODE_NORMAL) - chip->ctl_val[smc_read] = reg; - else - chip->ctl_val[smc_read] = chip->ctl_val[smc_base] | - CONTROL_COMMAND_MODE_NORMAL; - - dev_dbg(controller->dev, "default control register: %08x\n", - chip->ctl_val[smc_read]); - return 0; -} - -static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - const struct aspeed_smc_info *info = controller->info; - u32 cmd; - - if (chip->nor.addr_width == 4 && info->set_4b) - info->set_4b(chip); - - /* This is for direct AHB access when using Command Mode. */ - chip->ahb_window_size = aspeed_smc_chip_set_segment(chip); - - /* - * base mode has not been optimized yet. use it for writes. - */ - chip->ctl_val[smc_write] = chip->ctl_val[smc_base] | - chip->nor.program_opcode << CONTROL_COMMAND_SHIFT | - CONTROL_COMMAND_MODE_WRITE; - - dev_dbg(controller->dev, "write control register: %08x\n", - chip->ctl_val[smc_write]); - - /* - * TODO: Adjust clocks if fast read is supported and interpret - * SPI NOR flags to adjust controller settings. - */ - if (chip->nor.read_proto == SNOR_PROTO_1_1_1) { - if (chip->nor.read_dummy == 0) - cmd = CONTROL_COMMAND_MODE_NORMAL; - else - cmd = CONTROL_COMMAND_MODE_FREAD; - } else { - dev_err(chip->nor.dev, "unsupported SPI read mode\n"); - return -EINVAL; - } - - chip->ctl_val[smc_read] |= cmd | - CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8); - - dev_dbg(controller->dev, "base control register: %08x\n", - chip->ctl_val[smc_read]); - return 0; -} - -static const struct spi_nor_controller_ops aspeed_smc_controller_ops = { - .prepare = aspeed_smc_prep, - .unprepare = aspeed_smc_unprep, - .read_reg = aspeed_smc_read_reg, - .write_reg = aspeed_smc_write_reg, - .read = aspeed_smc_read_user, - .write = aspeed_smc_write_user, -}; - -static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, - struct device_node *np, struct resource *r) -{ - const struct spi_nor_hwcaps hwcaps = { - .mask = SNOR_HWCAPS_READ | - SNOR_HWCAPS_READ_FAST | - SNOR_HWCAPS_PP, - }; - const struct aspeed_smc_info *info = controller->info; - struct device *dev = controller->dev; - struct device_node *child; - unsigned int cs; - int ret = -ENODEV; - bool found_one = false; - - for_each_available_child_of_node(np, child) { - struct aspeed_smc_chip *chip; - struct spi_nor *nor; - struct mtd_info *mtd; - - /* This driver does not support NAND or NOR flash devices. */ - if (!of_device_is_compatible(child, "jedec,spi-nor")) - continue; - - ret = of_property_read_u32(child, "reg", &cs); - if (ret) { - dev_err(dev, "Couldn't not read chip select.\n"); - break; - } - - if (cs >= info->nce) { - dev_err(dev, "Chip select %d out of range.\n", - cs); - ret = -ERANGE; - break; - } - - if (controller->chips[cs]) { - dev_err(dev, "Chip select %d already in use by %s\n", - cs, dev_name(controller->chips[cs]->nor.dev)); - ret = -EBUSY; - break; - } - - chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) { - ret = -ENOMEM; - break; - } - - chip->controller = controller; - chip->ctl = controller->regs + info->ctl0 + cs * 4; - chip->cs = cs; - - nor = &chip->nor; - mtd = &nor->mtd; - - nor->dev = dev; - nor->priv = chip; - spi_nor_set_flash_node(nor, child); - nor->controller_ops = &aspeed_smc_controller_ops; - - ret = aspeed_smc_chip_setup_init(chip, r); - if (ret) - break; - - /* - * TODO: Add support for Dual and Quad SPI protocols - * attach when board support is present as determined - * by of property. - */ - ret = spi_nor_scan(nor, NULL, &hwcaps); - /* - * If we fail to scan the device it might not be present or - * broken. Don't fail the whole controller if others work. - */ - if (ret) { - if (found_one) - ret = 0; - - devm_kfree(controller->dev, chip); - continue; - } - - ret = aspeed_smc_chip_setup_finish(chip); - if (ret) - break; - - ret = mtd_device_register(mtd, NULL, 0); - if (ret) - break; - - controller->chips[cs] = chip; - found_one = true; - } - - if (ret) { - of_node_put(child); - aspeed_smc_unregister(controller); - } - - return ret; -} - -static int aspeed_smc_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct device *dev = &pdev->dev; - struct aspeed_smc_controller *controller; - const struct of_device_id *match; - const struct aspeed_smc_info *info; - struct resource *res; - int ret; - - match = of_match_device(aspeed_smc_matches, &pdev->dev); - if (!match || !match->data) - return -ENODEV; - info = match->data; - - controller = devm_kzalloc(&pdev->dev, - struct_size(controller, chips, info->nce), - GFP_KERNEL); - if (!controller) - return -ENOMEM; - controller->info = info; - controller->dev = dev; - - mutex_init(&controller->mutex); - platform_set_drvdata(pdev, controller); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - controller->regs = devm_ioremap_resource(dev, res); - if (IS_ERR(controller->regs)) - return PTR_ERR(controller->regs); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - controller->ahb_base = devm_ioremap_resource(dev, res); - if (IS_ERR(controller->ahb_base)) - return PTR_ERR(controller->ahb_base); - - controller->ahb_window_size = resource_size(res); - - ret = aspeed_smc_setup_flash(controller, np, res); - if (ret) - dev_err(dev, "Aspeed SMC probe failed %d\n", ret); - - return ret; -} - -static struct platform_driver aspeed_smc_driver = { - .probe = aspeed_smc_probe, - .remove = aspeed_smc_remove, - .driver = { - .name = DEVICE_NAME, - .of_match_table = aspeed_smc_matches, - } -}; - -module_platform_driver(aspeed_smc_driver); - -MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver"); -MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d2815eb361c0..38117775ff79 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -101,6 +101,17 @@ config SPI_ARMADA_3700 This enables support for the SPI controller present on the Marvell Armada 3700 SoCs. +config SPI_ASPEED_SMC + tristate "Aspeed flash controllers in SPI mode" + depends on ARCH_ASPEED || COMPILE_TEST + depends on OF + help + This enables support for the Firmware Memory controller (FMC) + in the Aspeed AST2600, AST2500 and AST2400 SoCs when attached + to SPI NOR chips, and support for the SPI flash memory + controller (SPI) for the host firmware. The implementation + only supports SPI NOR. + config SPI_ATMEL tristate "Atmel SPI Controller" depends on ARCH_AT91 || COMPILE_TEST @@ -414,15 +425,14 @@ config SPI_IMG_SPFI config SPI_IMX tristate "Freescale i.MX SPI controllers" depends on ARCH_MXC || COMPILE_TEST - select SPI_BITBANG help This enables support for the Freescale i.MX SPI controllers. config SPI_INGENIC - tristate "Ingenic JZ47xx SoCs SPI controller" + tristate "Ingenic SoCs SPI controller" depends on MACH_INGENIC || COMPILE_TEST help - This enables support for the Ingenic JZ47xx SoCs SPI controller. + This enables support for the Ingenic SoCs SPI controller. To compile this driver as a module, choose M here: the module will be called spi-ingenic. @@ -590,6 +600,16 @@ config SPI_MTK_NOR SPI interface as well as several SPI NOR specific instructions via SPI MEM interface. +config SPI_MTK_SNFI + tristate "MediaTek SPI NAND Flash Interface" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on MTD_NAND_ECC_MEDIATEK + help + This enables support for SPI-NAND mode on the MediaTek NAND + Flash Interface found on MediaTek ARM SoCs. This controller + is implemented as a SPI-MEM controller with pipelined ECC + capcability. + config SPI_NPCM_FIU tristate "Nuvoton NPCM FLASH Interface Unit" depends on ARCH_NPCM || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3aa28ed3f761..0f44eb6083a5 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_SPI_ALTERA_CORE) += spi-altera-core.o obj-$(CONFIG_SPI_ALTERA_DFL) += spi-altera-dfl.o obj-$(CONFIG_SPI_AR934X) += spi-ar934x.o obj-$(CONFIG_SPI_ARMADA_3700) += spi-armada-3700.o +obj-$(CONFIG_SPI_ASPEED_SMC) += spi-aspeed-smc.o obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o obj-$(CONFIG_SPI_AT91_USART) += spi-at91-usart.o @@ -76,6 +77,7 @@ obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o obj-$(CONFIG_SPI_MTK_NOR) += spi-mtk-nor.o +obj-$(CONFIG_SPI_MTK_SNFI) += spi-mtk-snfi.o obj-$(CONFIG_SPI_MXIC) += spi-mxic.o obj-$(CONFIG_SPI_MXS) += spi-mxs.o obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index 938017a60c8e..480c0c8c18e4 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -288,12 +288,6 @@ static bool atmel_qspi_supports_op(struct spi_mem *mem, op->dummy.nbytes == 0) return false; - /* DTR ops not supported. */ - if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr) - return false; - if (op->cmd.nbytes != 1) - return false; - return true; } diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c new file mode 100644 index 000000000000..496f3e1e9079 --- /dev/null +++ b/drivers/spi/spi-aspeed-smc.c @@ -0,0 +1,1210 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ASPEED FMC/SPI Memory Controller Driver + * + * Copyright (c) 2015-2022, IBM Corporation. + * Copyright (c) 2020, ASPEED Corporation. + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> + +#define DEVICE_NAME "spi-aspeed-smc" + +/* Type setting Register */ +#define CONFIG_REG 0x0 +#define CONFIG_TYPE_SPI 0x2 + +/* CE Control Register */ +#define CE_CTRL_REG 0x4 + +/* CEx Control Register */ +#define CE0_CTRL_REG 0x10 +#define CTRL_IO_MODE_MASK GENMASK(30, 28) +#define CTRL_IO_SINGLE_DATA 0x0 +#define CTRL_IO_DUAL_DATA BIT(29) +#define CTRL_IO_QUAD_DATA BIT(30) +#define CTRL_COMMAND_SHIFT 16 +#define CTRL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI only */ +#define CTRL_IO_DUMMY_SET(dummy) \ + (((((dummy) >> 2) & 0x1) << 14) | (((dummy) & 0x3) << 6)) +#define CTRL_FREQ_SEL_SHIFT 8 +#define CTRL_FREQ_SEL_MASK GENMASK(11, CTRL_FREQ_SEL_SHIFT) +#define CTRL_CE_STOP_ACTIVE BIT(2) +#define CTRL_IO_MODE_CMD_MASK GENMASK(1, 0) +#define CTRL_IO_MODE_NORMAL 0x0 +#define CTRL_IO_MODE_READ 0x1 +#define CTRL_IO_MODE_WRITE 0x2 +#define CTRL_IO_MODE_USER 0x3 + +#define CTRL_IO_CMD_MASK 0xf0ff40c3 + +/* CEx Address Decoding Range Register */ +#define CE0_SEGMENT_ADDR_REG 0x30 + +/* CEx Read timing compensation register */ +#define CE0_TIMING_COMPENSATION_REG 0x94 + +enum aspeed_spi_ctl_reg_value { + ASPEED_SPI_BASE, + ASPEED_SPI_READ, + ASPEED_SPI_WRITE, + ASPEED_SPI_MAX, +}; + +struct aspeed_spi; + +struct aspeed_spi_chip { + struct aspeed_spi *aspi; + u32 cs; + void __iomem *ctl; + void __iomem *ahb_base; + u32 ahb_window_size; + u32 ctl_val[ASPEED_SPI_MAX]; + u32 clk_freq; +}; + +struct aspeed_spi_data { + u32 ctl0; + u32 max_cs; + bool hastype; + u32 mode_bits; + u32 we0; + u32 timing; + u32 hclk_mask; + u32 hdiv_max; + + u32 (*segment_start)(struct aspeed_spi *aspi, u32 reg); + u32 (*segment_end)(struct aspeed_spi *aspi, u32 reg); + u32 (*segment_reg)(struct aspeed_spi *aspi, u32 start, u32 end); + int (*calibrate)(struct aspeed_spi_chip *chip, u32 hdiv, + const u8 *golden_buf, u8 *test_buf); +}; + +#define ASPEED_SPI_MAX_NUM_CS 5 + +struct aspeed_spi { + const struct aspeed_spi_data *data; + + void __iomem *regs; + void __iomem *ahb_base; + u32 ahb_base_phy; + u32 ahb_window_size; + struct device *dev; + + struct clk *clk; + u32 clk_freq; + + struct aspeed_spi_chip chips[ASPEED_SPI_MAX_NUM_CS]; +}; + +static u32 aspeed_spi_get_io_mode(const struct spi_mem_op *op) +{ + switch (op->data.buswidth) { + case 1: + return CTRL_IO_SINGLE_DATA; + case 2: + return CTRL_IO_DUAL_DATA; + case 4: + return CTRL_IO_QUAD_DATA; + default: + return CTRL_IO_SINGLE_DATA; + } +} + +static void aspeed_spi_set_io_mode(struct aspeed_spi_chip *chip, u32 io_mode) +{ + u32 ctl; + + if (io_mode > 0) { + ctl = readl(chip->ctl) & ~CTRL_IO_MODE_MASK; + ctl |= io_mode; + writel(ctl, chip->ctl); + } +} + +static void aspeed_spi_start_user(struct aspeed_spi_chip *chip) +{ + u32 ctl = chip->ctl_val[ASPEED_SPI_BASE]; + + ctl |= CTRL_IO_MODE_USER | CTRL_CE_STOP_ACTIVE; + writel(ctl, chip->ctl); + + ctl &= ~CTRL_CE_STOP_ACTIVE; + writel(ctl, chip->ctl); +} + +static void aspeed_spi_stop_user(struct aspeed_spi_chip *chip) +{ + u32 ctl = chip->ctl_val[ASPEED_SPI_READ] | + CTRL_IO_MODE_USER | CTRL_CE_STOP_ACTIVE; + + writel(ctl, chip->ctl); + + /* Restore defaults */ + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); +} + +static int aspeed_spi_read_from_ahb(void *buf, void __iomem *src, size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + ioread32_rep(src, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + ioread8_rep(src, (u8 *)buf + offset, len); + return 0; +} + +static int aspeed_spi_write_to_ahb(void __iomem *dst, const void *buf, size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + iowrite32_rep(dst, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + iowrite8_rep(dst, (const u8 *)buf + offset, len); + return 0; +} + +static int aspeed_spi_send_cmd_addr(struct aspeed_spi_chip *chip, u8 addr_nbytes, + u64 offset, u32 opcode) +{ + __be32 temp; + u32 cmdaddr; + + switch (addr_nbytes) { + case 3: + cmdaddr = offset & 0xFFFFFF; + cmdaddr |= opcode << 24; + + temp = cpu_to_be32(cmdaddr); + aspeed_spi_write_to_ahb(chip->ahb_base, &temp, 4); + break; + case 4: + temp = cpu_to_be32(offset); + aspeed_spi_write_to_ahb(chip->ahb_base, &opcode, 1); + aspeed_spi_write_to_ahb(chip->ahb_base, &temp, 4); + break; + default: + WARN_ONCE(1, "Unexpected address width %u", addr_nbytes); + return -EOPNOTSUPP; + } + return 0; +} + +static int aspeed_spi_read_reg(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op) +{ + aspeed_spi_start_user(chip); + aspeed_spi_write_to_ahb(chip->ahb_base, &op->cmd.opcode, 1); + aspeed_spi_read_from_ahb(op->data.buf.in, + chip->ahb_base, op->data.nbytes); + aspeed_spi_stop_user(chip); + return 0; +} + +static int aspeed_spi_write_reg(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op) +{ + aspeed_spi_start_user(chip); + aspeed_spi_write_to_ahb(chip->ahb_base, &op->cmd.opcode, 1); + aspeed_spi_write_to_ahb(chip->ahb_base, op->data.buf.out, + op->data.nbytes); + aspeed_spi_stop_user(chip); + return 0; +} + +static ssize_t aspeed_spi_read_user(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op, + u64 offset, size_t len, void *buf) +{ + int io_mode = aspeed_spi_get_io_mode(op); + u8 dummy = 0xFF; + int i; + int ret; + + aspeed_spi_start_user(chip); + + ret = aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, offset, op->cmd.opcode); + if (ret < 0) + return ret; + + if (op->dummy.buswidth && op->dummy.nbytes) { + for (i = 0; i < op->dummy.nbytes / op->dummy.buswidth; i++) + aspeed_spi_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy)); + } + + aspeed_spi_set_io_mode(chip, io_mode); + + aspeed_spi_read_from_ahb(buf, chip->ahb_base, len); + aspeed_spi_stop_user(chip); + return 0; +} + +static ssize_t aspeed_spi_write_user(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op) +{ + int ret; + + aspeed_spi_start_user(chip); + ret = aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, op->addr.val, op->cmd.opcode); + if (ret < 0) + return ret; + aspeed_spi_write_to_ahb(chip->ahb_base, op->data.buf.out, op->data.nbytes); + aspeed_spi_stop_user(chip); + return 0; +} + +/* support for 1-1-1, 1-1-2 or 1-1-4 */ +static bool aspeed_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + if (op->cmd.buswidth > 1) + return false; + + if (op->addr.nbytes != 0) { + if (op->addr.buswidth > 1) + return false; + if (op->addr.nbytes < 3 || op->addr.nbytes > 4) + return false; + } + + if (op->dummy.nbytes != 0) { + if (op->dummy.buswidth > 1 || op->dummy.nbytes > 7) + return false; + } + + if (op->data.nbytes != 0 && op->data.buswidth > 4) + return false; + + return spi_mem_default_supports_op(mem, op); +} + +static const struct aspeed_spi_data ast2400_spi_data; + +static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master); + struct aspeed_spi_chip *chip = &aspi->chips[mem->spi->chip_select]; + u32 addr_mode, addr_mode_backup; + u32 ctl_val; + int ret = 0; + + dev_dbg(aspi->dev, + "CE%d %s OP %#x mode:%d.%d.%d.%d naddr:%#x ndummies:%#x len:%#x", + chip->cs, op->data.dir == SPI_MEM_DATA_IN ? "read" : "write", + op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, + op->dummy.buswidth, op->data.buswidth, + op->addr.nbytes, op->dummy.nbytes, op->data.nbytes); + + addr_mode = readl(aspi->regs + CE_CTRL_REG); + addr_mode_backup = addr_mode; + + ctl_val = chip->ctl_val[ASPEED_SPI_BASE]; + ctl_val &= ~CTRL_IO_CMD_MASK; + + ctl_val |= op->cmd.opcode << CTRL_COMMAND_SHIFT; + + /* 4BYTE address mode */ + if (op->addr.nbytes) { + if (op->addr.nbytes == 4) + addr_mode |= (0x11 << chip->cs); + else + addr_mode &= ~(0x11 << chip->cs); + + if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data) + ctl_val |= CTRL_IO_ADDRESS_4B; + } + + if (op->dummy.nbytes) + ctl_val |= CTRL_IO_DUMMY_SET(op->dummy.nbytes / op->dummy.buswidth); + + if (op->data.nbytes) + ctl_val |= aspeed_spi_get_io_mode(op); + + if (op->data.dir == SPI_MEM_DATA_OUT) + ctl_val |= CTRL_IO_MODE_WRITE; + else + ctl_val |= CTRL_IO_MODE_READ; + + if (addr_mode != addr_mode_backup) + writel(addr_mode, aspi->regs + CE_CTRL_REG); + writel(ctl_val, chip->ctl); + + if (op->data.dir == SPI_MEM_DATA_IN) { + if (!op->addr.nbytes) + ret = aspeed_spi_read_reg(chip, op); + else + ret = aspeed_spi_read_user(chip, op, op->addr.val, + op->data.nbytes, op->data.buf.in); + } else { + if (!op->addr.nbytes) + ret = aspeed_spi_write_reg(chip, op); + else + ret = aspeed_spi_write_user(chip, op); + } + + /* Restore defaults */ + if (addr_mode != addr_mode_backup) + writel(addr_mode_backup, aspi->regs + CE_CTRL_REG); + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); + return ret; +} + +static int aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + int ret; + + ret = do_aspeed_spi_exec_op(mem, op); + if (ret) + dev_err(&mem->spi->dev, "operation failed: %d\n", ret); + return ret; +} + +static const char *aspeed_spi_get_name(struct spi_mem *mem) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master); + struct device *dev = aspi->dev; + + return devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev), mem->spi->chip_select); +} + +struct aspeed_spi_window { + u32 cs; + u32 offset; + u32 size; +}; + +static void aspeed_spi_get_windows(struct aspeed_spi *aspi, + struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS]) +{ + const struct aspeed_spi_data *data = aspi->data; + u32 reg_val; + u32 cs; + + for (cs = 0; cs < aspi->data->max_cs; cs++) { + reg_val = readl(aspi->regs + CE0_SEGMENT_ADDR_REG + cs * 4); + windows[cs].cs = cs; + windows[cs].size = data->segment_end(aspi, reg_val) - + data->segment_start(aspi, reg_val); + windows[cs].offset = cs ? windows[cs - 1].offset + windows[cs - 1].size : 0; + dev_vdbg(aspi->dev, "CE%d offset=0x%.8x size=0x%x\n", cs, + windows[cs].offset, windows[cs].size); + } +} + +/* + * On the AST2600, some CE windows are closed by default at reset but + * U-Boot should open all. + */ +static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip) +{ + struct aspeed_spi *aspi = chip->aspi; + struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 }; + struct aspeed_spi_window *win = &windows[chip->cs]; + + /* No segment registers for the AST2400 SPI controller */ + if (aspi->data == &ast2400_spi_data) { + win->offset = 0; + win->size = aspi->ahb_window_size; + } else { + aspeed_spi_get_windows(aspi, windows); + } + + chip->ahb_base = aspi->ahb_base + win->offset; + chip->ahb_window_size = win->size; + + dev_dbg(aspi->dev, "CE%d default window [ 0x%.8x - 0x%.8x ] %dMB", + chip->cs, aspi->ahb_base_phy + win->offset, + aspi->ahb_base_phy + win->offset + win->size - 1, + win->size >> 20); + + return chip->ahb_window_size ? 0 : -1; +} + +static int aspeed_spi_set_window(struct aspeed_spi *aspi, + const struct aspeed_spi_window *win) +{ + u32 start = aspi->ahb_base_phy + win->offset; + u32 end = start + win->size; + void __iomem *seg_reg = aspi->regs + CE0_SEGMENT_ADDR_REG + win->cs * 4; + u32 seg_val_backup = readl(seg_reg); + u32 seg_val = aspi->data->segment_reg(aspi, start, end); + + if (seg_val == seg_val_backup) + return 0; + + writel(seg_val, seg_reg); + + /* + * Restore initial value if something goes wrong else we could + * loose access to the chip. + */ + if (seg_val != readl(seg_reg)) { + dev_err(aspi->dev, "CE%d invalid window [ 0x%.8x - 0x%.8x ] %dMB", + win->cs, start, end - 1, win->size >> 20); + writel(seg_val_backup, seg_reg); + return -EIO; + } + + if (win->size) + dev_dbg(aspi->dev, "CE%d new window [ 0x%.8x - 0x%.8x ] %dMB", + win->cs, start, end - 1, win->size >> 20); + else + dev_dbg(aspi->dev, "CE%d window closed", win->cs); + + return 0; +} + +/* + * Yet to be done when possible : + * - Align mappings on flash size (we don't have the info) + * - ioremap each window, not strictly necessary since the overall window + * is correct. + */ +static const struct aspeed_spi_data ast2500_spi_data; +static const struct aspeed_spi_data ast2600_spi_data; +static const struct aspeed_spi_data ast2600_fmc_data; + +static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip, + u32 local_offset, u32 size) +{ + struct aspeed_spi *aspi = chip->aspi; + struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 }; + struct aspeed_spi_window *win = &windows[chip->cs]; + int ret; + + /* No segment registers for the AST2400 SPI controller */ + if (aspi->data == &ast2400_spi_data) + return 0; + + /* + * Due to an HW issue on the AST2500 SPI controller, the CE0 + * window size should be smaller than the maximum 128MB. + */ + if (aspi->data == &ast2500_spi_data && chip->cs == 0 && size == SZ_128M) { + size = 120 << 20; + dev_info(aspi->dev, "CE%d window resized to %dMB (AST2500 HW quirk)", + chip->cs, size >> 20); + } + + /* + * The decoding size of AST2600 SPI controller should set at + * least 2MB. + */ + if ((aspi->data == &ast2600_spi_data || aspi->data == &ast2600_fmc_data) && + size < SZ_2M) { + size = SZ_2M; + dev_info(aspi->dev, "CE%d window resized to %dMB (AST2600 Decoding)", + chip->cs, size >> 20); + } + + aspeed_spi_get_windows(aspi, windows); + + /* Adjust this chip window */ + win->offset += local_offset; + win->size = size; + + if (win->offset + win->size > aspi->ahb_window_size) { + win->size = aspi->ahb_window_size - win->offset; + dev_warn(aspi->dev, "CE%d window resized to %dMB", chip->cs, win->size >> 20); + } + + ret = aspeed_spi_set_window(aspi, win); + if (ret) + return ret; + + /* Update chip mapping info */ + chip->ahb_base = aspi->ahb_base + win->offset; + chip->ahb_window_size = win->size; + + /* + * Also adjust next chip window to make sure that it does not + * overlap with the current window. + */ + if (chip->cs < aspi->data->max_cs - 1) { + struct aspeed_spi_window *next = &windows[chip->cs + 1]; + + /* Change offset and size to keep the same end address */ + if ((next->offset + next->size) > (win->offset + win->size)) + next->size = (next->offset + next->size) - (win->offset + win->size); + else + next->size = 0; + next->offset = win->offset + win->size; + + aspeed_spi_set_window(aspi, next); + } + return 0; +} + +static int aspeed_spi_do_calibration(struct aspeed_spi_chip *chip); + +static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->master); + struct aspeed_spi_chip *chip = &aspi->chips[desc->mem->spi->chip_select]; + struct spi_mem_op *op = &desc->info.op_tmpl; + u32 ctl_val; + int ret = 0; + + chip->clk_freq = desc->mem->spi->max_speed_hz; + + /* Only for reads */ + if (op->data.dir != SPI_MEM_DATA_IN) + return -EOPNOTSUPP; + + aspeed_spi_chip_adjust_window(chip, desc->info.offset, desc->info.length); + + if (desc->info.length > chip->ahb_window_size) + dev_warn(aspi->dev, "CE%d window (%dMB) too small for mapping", + chip->cs, chip->ahb_window_size >> 20); + + /* Define the default IO read settings */ + ctl_val = readl(chip->ctl) & ~CTRL_IO_CMD_MASK; + ctl_val |= aspeed_spi_get_io_mode(op) | + op->cmd.opcode << CTRL_COMMAND_SHIFT | + CTRL_IO_DUMMY_SET(op->dummy.nbytes / op->dummy.buswidth) | + CTRL_IO_MODE_READ; + + /* Tune 4BYTE address mode */ + if (op->addr.nbytes) { + u32 addr_mode = readl(aspi->regs + CE_CTRL_REG); + + if (op->addr.nbytes == 4) + addr_mode |= (0x11 << chip->cs); + else + addr_mode &= ~(0x11 << chip->cs); + writel(addr_mode, aspi->regs + CE_CTRL_REG); + + /* AST2400 SPI controller sets 4BYTE address mode in + * CE0 Control Register + */ + if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data) + ctl_val |= CTRL_IO_ADDRESS_4B; + } + + /* READ mode is the controller default setting */ + chip->ctl_val[ASPEED_SPI_READ] = ctl_val; + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); + + ret = aspeed_spi_do_calibration(chip); + + dev_info(aspi->dev, "CE%d read buswidth:%d [0x%08x]\n", + chip->cs, op->data.buswidth, chip->ctl_val[ASPEED_SPI_READ]); + + return ret; +} + +static ssize_t aspeed_spi_dirmap_read(struct spi_mem_dirmap_desc *desc, + u64 offset, size_t len, void *buf) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->master); + struct aspeed_spi_chip *chip = &aspi->chips[desc->mem->spi->chip_select]; + + /* Switch to USER command mode if mapping window is too small */ + if (chip->ahb_window_size < offset + len) { + int ret; + + ret = aspeed_spi_read_user(chip, &desc->info.op_tmpl, offset, len, buf); + if (ret < 0) + return ret; + } else { + memcpy_fromio(buf, chip->ahb_base + offset, len); + } + + return len; +} + +static const struct spi_controller_mem_ops aspeed_spi_mem_ops = { + .supports_op = aspeed_spi_supports_op, + .exec_op = aspeed_spi_exec_op, + .get_name = aspeed_spi_get_name, + .dirmap_create = aspeed_spi_dirmap_create, + .dirmap_read = aspeed_spi_dirmap_read, +}; + +static void aspeed_spi_chip_set_type(struct aspeed_spi *aspi, unsigned int cs, int type) +{ + u32 reg; + + reg = readl(aspi->regs + CONFIG_REG); + reg &= ~(0x3 << (cs * 2)); + reg |= type << (cs * 2); + writel(reg, aspi->regs + CONFIG_REG); +} + +static void aspeed_spi_chip_enable(struct aspeed_spi *aspi, unsigned int cs, bool enable) +{ + u32 we_bit = BIT(aspi->data->we0 + cs); + u32 reg = readl(aspi->regs + CONFIG_REG); + + if (enable) + reg |= we_bit; + else + reg &= ~we_bit; + writel(reg, aspi->regs + CONFIG_REG); +} + +static int aspeed_spi_setup(struct spi_device *spi) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(spi->master); + const struct aspeed_spi_data *data = aspi->data; + unsigned int cs = spi->chip_select; + struct aspeed_spi_chip *chip = &aspi->chips[cs]; + + chip->aspi = aspi; + chip->cs = cs; + chip->ctl = aspi->regs + data->ctl0 + cs * 4; + + /* The driver only supports SPI type flash */ + if (data->hastype) + aspeed_spi_chip_set_type(aspi, cs, CONFIG_TYPE_SPI); + + if (aspeed_spi_chip_set_default_window(chip) < 0) { + dev_warn(aspi->dev, "CE%d window invalid", cs); + return -EINVAL; + } + + aspeed_spi_chip_enable(aspi, cs, true); + + chip->ctl_val[ASPEED_SPI_BASE] = CTRL_CE_STOP_ACTIVE | CTRL_IO_MODE_USER; + + dev_dbg(aspi->dev, "CE%d setup done\n", cs); + return 0; +} + +static void aspeed_spi_cleanup(struct spi_device *spi) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(spi->master); + unsigned int cs = spi->chip_select; + + aspeed_spi_chip_enable(aspi, cs, false); + + dev_dbg(aspi->dev, "CE%d cleanup done\n", cs); +} + +static void aspeed_spi_enable(struct aspeed_spi *aspi, bool enable) +{ + int cs; + + for (cs = 0; cs < aspi->data->max_cs; cs++) + aspeed_spi_chip_enable(aspi, cs, enable); +} + +static int aspeed_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct aspeed_spi_data *data; + struct spi_controller *ctlr; + struct aspeed_spi *aspi; + struct resource *res; + int ret; + + data = of_device_get_match_data(&pdev->dev); + if (!data) + return -ENODEV; + + ctlr = devm_spi_alloc_master(dev, sizeof(*aspi)); + if (!ctlr) + return -ENOMEM; + + aspi = spi_controller_get_devdata(ctlr); + platform_set_drvdata(pdev, aspi); + aspi->data = data; + aspi->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + aspi->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(aspi->regs)) { + dev_err(dev, "missing AHB register window\n"); + return PTR_ERR(aspi->regs); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + aspi->ahb_base = devm_ioremap_resource(dev, res); + if (IS_ERR(aspi->ahb_base)) { + dev_err(dev, "missing AHB mapping window\n"); + return PTR_ERR(aspi->ahb_base); + } + + aspi->ahb_window_size = resource_size(res); + aspi->ahb_base_phy = res->start; + + aspi->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(aspi->clk)) { + dev_err(dev, "missing clock\n"); + return PTR_ERR(aspi->clk); + } + + aspi->clk_freq = clk_get_rate(aspi->clk); + if (!aspi->clk_freq) { + dev_err(dev, "invalid clock\n"); + return -EINVAL; + } + + ret = clk_prepare_enable(aspi->clk); + if (ret) { + dev_err(dev, "can not enable the clock\n"); + return ret; + } + + /* IRQ is for DMA, which the driver doesn't support yet */ + + ctlr->mode_bits = SPI_RX_DUAL | SPI_TX_DUAL | data->mode_bits; + ctlr->bus_num = pdev->id; + ctlr->mem_ops = &aspeed_spi_mem_ops; + ctlr->setup = aspeed_spi_setup; + ctlr->cleanup = aspeed_spi_cleanup; + ctlr->num_chipselect = data->max_cs; + ctlr->dev.of_node = dev->of_node; + + ret = devm_spi_register_controller(dev, ctlr); + if (ret) { + dev_err(&pdev->dev, "spi_register_controller failed\n"); + goto disable_clk; + } + return 0; + +disable_clk: + clk_disable_unprepare(aspi->clk); + return ret; +} + +static int aspeed_spi_remove(struct platform_device *pdev) +{ + struct aspeed_spi *aspi = platform_get_drvdata(pdev); + + aspeed_spi_enable(aspi, false); + clk_disable_unprepare(aspi->clk); + return 0; +} + +/* + * AHB mappings + */ + +/* + * The Segment Registers of the AST2400 and AST2500 use a 8MB unit. + * The address range is encoded with absolute addresses in the overall + * mapping window. + */ +static u32 aspeed_spi_segment_start(struct aspeed_spi *aspi, u32 reg) +{ + return ((reg >> 16) & 0xFF) << 23; +} + +static u32 aspeed_spi_segment_end(struct aspeed_spi *aspi, u32 reg) +{ + return ((reg >> 24) & 0xFF) << 23; +} + +static u32 aspeed_spi_segment_reg(struct aspeed_spi *aspi, u32 start, u32 end) +{ + return (((start >> 23) & 0xFF) << 16) | (((end >> 23) & 0xFF) << 24); +} + +/* + * The Segment Registers of the AST2600 use a 1MB unit. The address + * range is encoded with offsets in the overall mapping window. + */ + +#define AST2600_SEG_ADDR_MASK 0x0ff00000 + +static u32 aspeed_spi_segment_ast2600_start(struct aspeed_spi *aspi, + u32 reg) +{ + u32 start_offset = (reg << 16) & AST2600_SEG_ADDR_MASK; + + return aspi->ahb_base_phy + start_offset; +} + +static u32 aspeed_spi_segment_ast2600_end(struct aspeed_spi *aspi, + u32 reg) +{ + u32 end_offset = reg & AST2600_SEG_ADDR_MASK; + + /* segment is disabled */ + if (!end_offset) + return aspi->ahb_base_phy; + + return aspi->ahb_base_phy + end_offset + 0x100000; +} + +static u32 aspeed_spi_segment_ast2600_reg(struct aspeed_spi *aspi, + u32 start, u32 end) +{ + /* disable zero size segments */ + if (start == end) + return 0; + + return ((start & AST2600_SEG_ADDR_MASK) >> 16) | + ((end - 1) & AST2600_SEG_ADDR_MASK); +} + +/* + * Read timing compensation sequences + */ + +#define CALIBRATE_BUF_SIZE SZ_16K + +static bool aspeed_spi_check_reads(struct aspeed_spi_chip *chip, + const u8 *golden_buf, u8 *test_buf) +{ + int i; + + for (i = 0; i < 10; i++) { + memcpy_fromio(test_buf, chip->ahb_base, CALIBRATE_BUF_SIZE); + if (memcmp(test_buf, golden_buf, CALIBRATE_BUF_SIZE) != 0) { +#if defined(VERBOSE_DEBUG) + print_hex_dump_bytes(DEVICE_NAME " fail: ", DUMP_PREFIX_NONE, + test_buf, 0x100); +#endif + return false; + } + } + return true; +} + +#define FREAD_TPASS(i) (((i) / 2) | (((i) & 1) ? 0 : 8)) + +/* + * The timing register is shared by all devices. Only update for CE0. + */ +static int aspeed_spi_calibrate(struct aspeed_spi_chip *chip, u32 hdiv, + const u8 *golden_buf, u8 *test_buf) +{ + struct aspeed_spi *aspi = chip->aspi; + const struct aspeed_spi_data *data = aspi->data; + int i; + int good_pass = -1, pass_count = 0; + u32 shift = (hdiv - 1) << 2; + u32 mask = ~(0xfu << shift); + u32 fread_timing_val = 0; + + /* Try HCLK delay 0..5, each one with/without delay and look for a + * good pair. + */ + for (i = 0; i < 12; i++) { + bool pass; + + if (chip->cs == 0) { + fread_timing_val &= mask; + fread_timing_val |= FREAD_TPASS(i) << shift; + writel(fread_timing_val, aspi->regs + data->timing); + } + pass = aspeed_spi_check_reads(chip, golden_buf, test_buf); + dev_dbg(aspi->dev, + " * [%08x] %d HCLK delay, %dns DI delay : %s", + fread_timing_val, i / 2, (i & 1) ? 0 : 4, + pass ? "PASS" : "FAIL"); + if (pass) { + pass_count++; + if (pass_count == 3) { + good_pass = i - 1; + break; + } + } else { + pass_count = 0; + } + } + + /* No good setting for this frequency */ + if (good_pass < 0) + return -1; + + /* We have at least one pass of margin, let's use first pass */ + if (chip->cs == 0) { + fread_timing_val &= mask; + fread_timing_val |= FREAD_TPASS(good_pass) << shift; + writel(fread_timing_val, aspi->regs + data->timing); + } + dev_dbg(aspi->dev, " * -> good is pass %d [0x%08x]", + good_pass, fread_timing_val); + return 0; +} + +static bool aspeed_spi_check_calib_data(const u8 *test_buf, u32 size) +{ + const u32 *tb32 = (const u32 *)test_buf; + u32 i, cnt = 0; + + /* We check if we have enough words that are neither all 0 + * nor all 1's so the calibration can be considered valid. + * + * I use an arbitrary threshold for now of 64 + */ + size >>= 2; + for (i = 0; i < size; i++) { + if (tb32[i] != 0 && tb32[i] != 0xffffffff) + cnt++; + } + return cnt >= 64; +} + +static const u32 aspeed_spi_hclk_divs[] = { + 0xf, /* HCLK */ + 0x7, /* HCLK/2 */ + 0xe, /* HCLK/3 */ + 0x6, /* HCLK/4 */ + 0xd, /* HCLK/5 */ +}; + +#define ASPEED_SPI_HCLK_DIV(i) \ + (aspeed_spi_hclk_divs[(i) - 1] << CTRL_FREQ_SEL_SHIFT) + +static int aspeed_spi_do_calibration(struct aspeed_spi_chip *chip) +{ + struct aspeed_spi *aspi = chip->aspi; + const struct aspeed_spi_data *data = aspi->data; + u32 ahb_freq = aspi->clk_freq; + u32 max_freq = chip->clk_freq; + u32 ctl_val; + u8 *golden_buf = NULL; + u8 *test_buf = NULL; + int i, rc, best_div = -1; + + dev_dbg(aspi->dev, "calculate timing compensation - AHB freq: %d MHz", + ahb_freq / 1000000); + + /* + * use the related low frequency to get check calibration data + * and get golden data. + */ + ctl_val = chip->ctl_val[ASPEED_SPI_READ] & data->hclk_mask; + writel(ctl_val, chip->ctl); + + test_buf = kzalloc(CALIBRATE_BUF_SIZE * 2, GFP_KERNEL); + if (!test_buf) + return -ENOMEM; + + golden_buf = test_buf + CALIBRATE_BUF_SIZE; + + memcpy_fromio(golden_buf, chip->ahb_base, CALIBRATE_BUF_SIZE); + if (!aspeed_spi_check_calib_data(golden_buf, CALIBRATE_BUF_SIZE)) { + dev_info(aspi->dev, "Calibration area too uniform, using low speed"); + goto no_calib; + } + +#if defined(VERBOSE_DEBUG) + print_hex_dump_bytes(DEVICE_NAME " good: ", DUMP_PREFIX_NONE, + golden_buf, 0x100); +#endif + + /* Now we iterate the HCLK dividers until we find our breaking point */ + for (i = ARRAY_SIZE(aspeed_spi_hclk_divs); i > data->hdiv_max - 1; i--) { + u32 tv, freq; + + freq = ahb_freq / i; + if (freq > max_freq) + continue; + + /* Set the timing */ + tv = chip->ctl_val[ASPEED_SPI_READ] | ASPEED_SPI_HCLK_DIV(i); + writel(tv, chip->ctl); + dev_dbg(aspi->dev, "Trying HCLK/%d [%08x] ...", i, tv); + rc = data->calibrate(chip, i, golden_buf, test_buf); + if (rc == 0) + best_div = i; + } + + /* Nothing found ? */ + if (best_div < 0) { + dev_warn(aspi->dev, "No good frequency, using dumb slow"); + } else { + dev_dbg(aspi->dev, "Found good read timings at HCLK/%d", best_div); + + /* Record the freq */ + for (i = 0; i < ASPEED_SPI_MAX; i++) + chip->ctl_val[i] = (chip->ctl_val[i] & data->hclk_mask) | + ASPEED_SPI_HCLK_DIV(best_div); + } + +no_calib: + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); + kfree(test_buf); + return 0; +} + +#define TIMING_DELAY_DI BIT(3) +#define TIMING_DELAY_HCYCLE_MAX 5 +#define TIMING_REG_AST2600(chip) \ + ((chip)->aspi->regs + (chip)->aspi->data->timing + \ + (chip)->cs * 4) + +static int aspeed_spi_ast2600_calibrate(struct aspeed_spi_chip *chip, u32 hdiv, + const u8 *golden_buf, u8 *test_buf) +{ + struct aspeed_spi *aspi = chip->aspi; + int hcycle; + u32 shift = (hdiv - 2) << 3; + u32 mask = ~(0xfu << shift); + u32 fread_timing_val = 0; + + for (hcycle = 0; hcycle <= TIMING_DELAY_HCYCLE_MAX; hcycle++) { + int delay_ns; + bool pass = false; + + fread_timing_val &= mask; + fread_timing_val |= hcycle << shift; + + /* no DI input delay first */ + writel(fread_timing_val, TIMING_REG_AST2600(chip)); + pass = aspeed_spi_check_reads(chip, golden_buf, test_buf); + dev_dbg(aspi->dev, + " * [%08x] %d HCLK delay, DI delay none : %s", + fread_timing_val, hcycle, pass ? "PASS" : "FAIL"); + if (pass) + return 0; + + /* Add DI input delays */ + fread_timing_val &= mask; + fread_timing_val |= (TIMING_DELAY_DI | hcycle) << shift; + + for (delay_ns = 0; delay_ns < 0x10; delay_ns++) { + fread_timing_val &= ~(0xf << (4 + shift)); + fread_timing_val |= delay_ns << (4 + shift); + + writel(fread_timing_val, TIMING_REG_AST2600(chip)); + pass = aspeed_spi_check_reads(chip, golden_buf, test_buf); + dev_dbg(aspi->dev, + " * [%08x] %d HCLK delay, DI delay %d.%dns : %s", + fread_timing_val, hcycle, (delay_ns + 1) / 2, + (delay_ns + 1) & 1 ? 5 : 5, pass ? "PASS" : "FAIL"); + /* + * TODO: This is optimistic. We should look + * for a working interval and save the middle + * value in the read timing register. + */ + if (pass) + return 0; + } + } + + /* No good setting for this frequency */ + return -1; +} + +/* + * Platform definitions + */ +static const struct aspeed_spi_data ast2400_fmc_data = { + .max_cs = 5, + .hastype = true, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xfffff0ff, + .hdiv_max = 1, + .calibrate = aspeed_spi_calibrate, + .segment_start = aspeed_spi_segment_start, + .segment_end = aspeed_spi_segment_end, + .segment_reg = aspeed_spi_segment_reg, +}; + +static const struct aspeed_spi_data ast2400_spi_data = { + .max_cs = 1, + .hastype = false, + .we0 = 0, + .ctl0 = 0x04, + .timing = 0x14, + .hclk_mask = 0xfffff0ff, + .hdiv_max = 1, + .calibrate = aspeed_spi_calibrate, + /* No segment registers */ +}; + +static const struct aspeed_spi_data ast2500_fmc_data = { + .max_cs = 3, + .hastype = true, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xffffd0ff, + .hdiv_max = 1, + .calibrate = aspeed_spi_calibrate, + .segment_start = aspeed_spi_segment_start, + .segment_end = aspeed_spi_segment_end, + .segment_reg = aspeed_spi_segment_reg, +}; + +static const struct aspeed_spi_data ast2500_spi_data = { + .max_cs = 2, + .hastype = false, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xffffd0ff, + .hdiv_max = 1, + .calibrate = aspeed_spi_calibrate, + .segment_start = aspeed_spi_segment_start, + .segment_end = aspeed_spi_segment_end, + .segment_reg = aspeed_spi_segment_reg, +}; + +static const struct aspeed_spi_data ast2600_fmc_data = { + .max_cs = 3, + .hastype = false, + .mode_bits = SPI_RX_QUAD | SPI_RX_QUAD, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xf0fff0ff, + .hdiv_max = 2, + .calibrate = aspeed_spi_ast2600_calibrate, + .segment_start = aspeed_spi_segment_ast2600_start, + .segment_end = aspeed_spi_segment_ast2600_end, + .segment_reg = aspeed_spi_segment_ast2600_reg, +}; + +static const struct aspeed_spi_data ast2600_spi_data = { + .max_cs = 2, + .hastype = false, + .mode_bits = SPI_RX_QUAD | SPI_RX_QUAD, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xf0fff0ff, + .hdiv_max = 2, + .calibrate = aspeed_spi_ast2600_calibrate, + .segment_start = aspeed_spi_segment_ast2600_start, + .segment_end = aspeed_spi_segment_ast2600_end, + .segment_reg = aspeed_spi_segment_ast2600_reg, +}; + +static const struct of_device_id aspeed_spi_matches[] = { + { .compatible = "aspeed,ast2400-fmc", .data = &ast2400_fmc_data }, + { .compatible = "aspeed,ast2400-spi", .data = &ast2400_spi_data }, + { .compatible = "aspeed,ast2500-fmc", .data = &ast2500_fmc_data }, + { .compatible = "aspeed,ast2500-spi", .data = &ast2500_spi_data }, + { .compatible = "aspeed,ast2600-fmc", .data = &ast2600_fmc_data }, + { .compatible = "aspeed,ast2600-spi", .data = &ast2600_spi_data }, + { } +}; +MODULE_DEVICE_TABLE(of, aspeed_spi_matches); + +static struct platform_driver aspeed_spi_driver = { + .probe = aspeed_spi_probe, + .remove = aspeed_spi_remove, + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_spi_matches, + } +}; + +module_platform_driver(aspeed_spi_driver); + +MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver"); +MODULE_AUTHOR("Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>"); +MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c index 4b59a1b1bf7e..e008761298da 100644 --- a/drivers/spi/spi-au1550.c +++ b/drivers/spi/spi-au1550.c @@ -405,7 +405,7 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) dma_unmap_single(hw->dev, dma_tx_addr, t->len, DMA_TO_DEVICE); - return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; + return min(hw->rx_count, hw->tx_count); } static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw) @@ -539,7 +539,7 @@ static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t) wait_for_completion(&hw->master_done); - return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; + return min(hw->rx_count, hw->tx_count); } static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw) diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 19686fb47bb3..2b9fc8449a62 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -43,6 +43,8 @@ /* Capabilities */ #define CQSPI_SUPPORTS_OCTAL BIT(0) +#define CQSPI_OP_WIDTH(part) ((part).nbytes ? ilog2((part).buswidth) : 0) + struct cqspi_st; struct cqspi_flash_pdata { @@ -53,16 +55,12 @@ struct cqspi_flash_pdata { u32 tsd2d_ns; u32 tchsh_ns; u32 tslch_ns; - u8 inst_width; - u8 addr_width; - u8 data_width; - bool dtr; u8 cs; }; struct cqspi_st { struct platform_device *pdev; - + struct spi_master *master; struct clk *clk; unsigned int sclk; @@ -343,18 +341,18 @@ static irqreturn_t cqspi_irq_handler(int this_irq, void *dev) return IRQ_HANDLED; } -static unsigned int cqspi_calc_rdreg(struct cqspi_flash_pdata *f_pdata) +static unsigned int cqspi_calc_rdreg(const struct spi_mem_op *op) { u32 rdreg = 0; - rdreg |= f_pdata->inst_width << CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB; - rdreg |= f_pdata->addr_width << CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB; - rdreg |= f_pdata->data_width << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB; + rdreg |= CQSPI_OP_WIDTH(op->cmd) << CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB; + rdreg |= CQSPI_OP_WIDTH(op->addr) << CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB; + rdreg |= CQSPI_OP_WIDTH(op->data) << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB; return rdreg; } -static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op, bool dtr) +static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op) { unsigned int dummy_clk; @@ -362,66 +360,12 @@ static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op, bool dtr) return 0; dummy_clk = op->dummy.nbytes * (8 / op->dummy.buswidth); - if (dtr) + if (op->cmd.dtr) dummy_clk /= 2; return dummy_clk; } -static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata, - const struct spi_mem_op *op) -{ - /* - * For an op to be DTR, cmd phase along with every other non-empty - * phase should have dtr field set to 1. If an op phase has zero - * nbytes, ignore its dtr field; otherwise, check its dtr field. - */ - f_pdata->dtr = op->cmd.dtr && - (!op->addr.nbytes || op->addr.dtr) && - (!op->data.nbytes || op->data.dtr); - - f_pdata->inst_width = 0; - if (op->cmd.buswidth) - f_pdata->inst_width = ilog2(op->cmd.buswidth); - - f_pdata->addr_width = 0; - if (op->addr.buswidth) - f_pdata->addr_width = ilog2(op->addr.buswidth); - - f_pdata->data_width = 0; - if (op->data.buswidth) - f_pdata->data_width = ilog2(op->data.buswidth); - - /* Right now we only support 8-8-8 DTR mode. */ - if (f_pdata->dtr) { - switch (op->cmd.buswidth) { - case 0: - case 8: - break; - default: - return -EINVAL; - } - - switch (op->addr.buswidth) { - case 0: - case 8: - break; - default: - return -EINVAL; - } - - switch (op->data.buswidth) { - case 0: - case 8: - break; - default: - return -EINVAL; - } - } - - return 0; -} - static int cqspi_wait_idle(struct cqspi_st *cqspi) { const unsigned int poll_idle_retry = 3; @@ -503,8 +447,7 @@ static int cqspi_setup_opcode_ext(struct cqspi_flash_pdata *f_pdata, } static int cqspi_enable_dtr(struct cqspi_flash_pdata *f_pdata, - const struct spi_mem_op *op, unsigned int shift, - bool enable) + const struct spi_mem_op *op, unsigned int shift) { struct cqspi_st *cqspi = f_pdata->cqspi; void __iomem *reg_base = cqspi->iobase; @@ -517,7 +460,7 @@ static int cqspi_enable_dtr(struct cqspi_flash_pdata *f_pdata, * We enable dual byte opcode here. The callers have to set up the * extension opcode based on which type of operation it is. */ - if (enable) { + if (op->cmd.dtr) { reg |= CQSPI_REG_CONFIG_DTR_PROTO; reg |= CQSPI_REG_CONFIG_DUAL_OPCODE; @@ -549,12 +492,7 @@ static int cqspi_command_read(struct cqspi_flash_pdata *f_pdata, size_t read_len; int status; - status = cqspi_set_protocol(f_pdata, op); - if (status) - return status; - - status = cqspi_enable_dtr(f_pdata, op, CQSPI_REG_OP_EXT_STIG_LSB, - f_pdata->dtr); + status = cqspi_enable_dtr(f_pdata, op, CQSPI_REG_OP_EXT_STIG_LSB); if (status) return status; @@ -565,17 +503,17 @@ static int cqspi_command_read(struct cqspi_flash_pdata *f_pdata, return -EINVAL; } - if (f_pdata->dtr) + if (op->cmd.dtr) opcode = op->cmd.opcode >> 8; else opcode = op->cmd.opcode; reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB; - rdreg = cqspi_calc_rdreg(f_pdata); + rdreg = cqspi_calc_rdreg(op); writel(rdreg, reg_base + CQSPI_REG_RD_INSTR); - dummy_clk = cqspi_calc_dummy(op, f_pdata->dtr); + dummy_clk = cqspi_calc_dummy(op); if (dummy_clk > CQSPI_DUMMY_CLKS_MAX) return -EOPNOTSUPP; @@ -622,12 +560,7 @@ static int cqspi_command_write(struct cqspi_flash_pdata *f_pdata, size_t write_len; int ret; - ret = cqspi_set_protocol(f_pdata, op); - if (ret) - return ret; - - ret = cqspi_enable_dtr(f_pdata, op, CQSPI_REG_OP_EXT_STIG_LSB, - f_pdata->dtr); + ret = cqspi_enable_dtr(f_pdata, op, CQSPI_REG_OP_EXT_STIG_LSB); if (ret) return ret; @@ -638,10 +571,10 @@ static int cqspi_command_write(struct cqspi_flash_pdata *f_pdata, return -EINVAL; } - reg = cqspi_calc_rdreg(f_pdata); + reg = cqspi_calc_rdreg(op); writel(reg, reg_base + CQSPI_REG_RD_INSTR); - if (f_pdata->dtr) + if (op->cmd.dtr) opcode = op->cmd.opcode >> 8; else opcode = op->cmd.opcode; @@ -688,21 +621,20 @@ static int cqspi_read_setup(struct cqspi_flash_pdata *f_pdata, int ret; u8 opcode; - ret = cqspi_enable_dtr(f_pdata, op, CQSPI_REG_OP_EXT_READ_LSB, - f_pdata->dtr); + ret = cqspi_enable_dtr(f_pdata, op, CQSPI_REG_OP_EXT_READ_LSB); if (ret) return ret; - if (f_pdata->dtr) + if (op->cmd.dtr) opcode = op->cmd.opcode >> 8; else opcode = op->cmd.opcode; reg = opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB; - reg |= cqspi_calc_rdreg(f_pdata); + reg |= cqspi_calc_rdreg(op); /* Setup dummy clock cycles */ - dummy_clk = cqspi_calc_dummy(op, f_pdata->dtr); + dummy_clk = cqspi_calc_dummy(op); if (dummy_clk > CQSPI_DUMMY_CLKS_MAX) return -EOPNOTSUPP; @@ -947,22 +879,21 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata, void __iomem *reg_base = cqspi->iobase; u8 opcode; - ret = cqspi_enable_dtr(f_pdata, op, CQSPI_REG_OP_EXT_WRITE_LSB, - f_pdata->dtr); + ret = cqspi_enable_dtr(f_pdata, op, CQSPI_REG_OP_EXT_WRITE_LSB); if (ret) return ret; - if (f_pdata->dtr) + if (op->cmd.dtr) opcode = op->cmd.opcode >> 8; else opcode = op->cmd.opcode; /* Set opcode. */ reg = opcode << CQSPI_REG_WR_INSTR_OPCODE_LSB; - reg |= f_pdata->data_width << CQSPI_REG_WR_INSTR_TYPE_DATA_LSB; - reg |= f_pdata->addr_width << CQSPI_REG_WR_INSTR_TYPE_ADDR_LSB; + reg |= CQSPI_OP_WIDTH(op->data) << CQSPI_REG_WR_INSTR_TYPE_DATA_LSB; + reg |= CQSPI_OP_WIDTH(op->addr) << CQSPI_REG_WR_INSTR_TYPE_ADDR_LSB; writel(reg, reg_base + CQSPI_REG_WR_INSTR); - reg = cqspi_calc_rdreg(f_pdata); + reg = cqspi_calc_rdreg(op); writel(reg, reg_base + CQSPI_REG_RD_INSTR); /* @@ -1244,10 +1175,6 @@ static ssize_t cqspi_write(struct cqspi_flash_pdata *f_pdata, const u_char *buf = op->data.buf.out; int ret; - ret = cqspi_set_protocol(f_pdata, op); - if (ret) - return ret; - ret = cqspi_write_setup(f_pdata, op); if (ret) return ret; @@ -1260,7 +1187,7 @@ static ssize_t cqspi_write(struct cqspi_flash_pdata *f_pdata, * mode. So, we can not use direct mode when in DTR mode for writing * data. */ - if (!f_pdata->dtr && cqspi->use_direct_mode && + if (!op->cmd.dtr && cqspi->use_direct_mode && ((to + len) <= cqspi->ahb_size)) { memcpy_toio(cqspi->ahb_base + to, buf, len); return cqspi_wait_idle(cqspi); @@ -1348,9 +1275,6 @@ static ssize_t cqspi_read(struct cqspi_flash_pdata *f_pdata, int ret; ddata = of_device_get_match_data(dev); - ret = cqspi_set_protocol(f_pdata, op); - if (ret) - return ret; ret = cqspi_read_setup(f_pdata, op); if (ret) @@ -1423,13 +1347,7 @@ static bool cqspi_supports_mem_op(struct spi_mem *mem, return false; if (op->data.nbytes && op->data.buswidth != 8) return false; - } else if (all_false) { - /* Only 1-1-X ops are supported without DTR */ - if (op->cmd.nbytes && op->cmd.buswidth > 1) - return false; - if (op->addr.nbytes && op->addr.buswidth > 1) - return false; - } else { + } else if (!all_false) { /* Mixed DTR modes are not supported. */ return false; } @@ -1563,6 +1481,7 @@ static int cqspi_request_mmap_dma(struct cqspi_st *cqspi) cqspi->rx_chan = dma_request_chan_by_mask(&mask); if (IS_ERR(cqspi->rx_chan)) { int ret = PTR_ERR(cqspi->rx_chan); + cqspi->rx_chan = NULL; return dev_err_probe(&cqspi->pdev->dev, ret, "No Rx DMA available\n"); } @@ -1639,7 +1558,7 @@ static int cqspi_probe(struct platform_device *pdev) int ret; int irq; - master = spi_alloc_master(&pdev->dev, sizeof(*cqspi)); + master = devm_spi_alloc_master(&pdev->dev, sizeof(*cqspi)); if (!master) { dev_err(&pdev->dev, "spi_alloc_master failed\n"); return -ENOMEM; @@ -1652,6 +1571,7 @@ static int cqspi_probe(struct platform_device *pdev) cqspi = spi_master_get_devdata(master); cqspi->pdev = pdev; + cqspi->master = master; platform_set_drvdata(pdev, cqspi); /* Obtain configuration from OF. */ @@ -1700,11 +1620,9 @@ static int cqspi_probe(struct platform_device *pdev) } pm_runtime_enable(dev); - ret = pm_runtime_get_sync(dev); - if (ret < 0) { - pm_runtime_put_noidle(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) goto probe_master_put; - } ret = clk_prepare_enable(cqspi->clk); if (ret) { @@ -1784,7 +1702,7 @@ static int cqspi_probe(struct platform_device *pdev) goto probe_setup_failed; } - ret = devm_spi_register_master(dev, master); + ret = spi_register_master(master); if (ret) { dev_err(&pdev->dev, "failed to register SPI ctlr %d\n", ret); goto probe_setup_failed; @@ -1807,6 +1725,7 @@ static int cqspi_remove(struct platform_device *pdev) { struct cqspi_st *cqspi = platform_get_drvdata(pdev); + spi_unregister_master(cqspi->master); cqspi_controller_enable(cqspi, 0); if (cqspi->rx_chan) @@ -1865,7 +1784,7 @@ static const struct cqspi_driver_platdata intel_lgm_qspi = { }; static const struct cqspi_driver_platdata socfpga_qspi = { - .quirks = CQSPI_NO_SUPPORT_WR_COMPLETION, + .quirks = CQSPI_DISABLE_DAC_MODE | CQSPI_NO_SUPPORT_WR_COMPLETION, }; static const struct cqspi_driver_platdata versal_ospi = { @@ -1894,11 +1813,11 @@ static const struct of_device_id cqspi_dt_ids[] = { }, { .compatible = "xlnx,versal-ospi-1.0", - .data = (void *)&versal_ospi, + .data = &versal_ospi, }, { .compatible = "intel,socfpga-qspi", - .data = (void *)&socfpga_qspi, + .data = &socfpga_qspi, }, { /* end of table */ } }; diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index ceb16e70d235..a23d4f6329f5 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -342,7 +342,8 @@ static irqreturn_t cdns_spi_irq(int irq, void *dev_id) { struct spi_master *master = dev_id; struct cdns_spi *xspi = spi_master_get_devdata(master); - u32 intr_status, status; + irqreturn_t status; + u32 intr_status; status = IRQ_NONE; intr_status = cdns_spi_read(xspi, CDNS_SPI_ISR); @@ -657,7 +658,7 @@ static int __maybe_unused cdns_spi_resume(struct device *dev) * * Return: 0 on success and error value on error */ -static int __maybe_unused cnds_runtime_resume(struct device *dev) +static int __maybe_unused cdns_spi_runtime_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct cdns_spi *xspi = spi_master_get_devdata(master); @@ -686,7 +687,7 @@ static int __maybe_unused cnds_runtime_resume(struct device *dev) * * Return: Always 0 */ -static int __maybe_unused cnds_runtime_suspend(struct device *dev) +static int __maybe_unused cdns_spi_runtime_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct cdns_spi *xspi = spi_master_get_devdata(master); @@ -698,8 +699,8 @@ static int __maybe_unused cnds_runtime_suspend(struct device *dev) } static const struct dev_pm_ops cdns_spi_dev_pm_ops = { - SET_RUNTIME_PM_OPS(cnds_runtime_suspend, - cnds_runtime_resume, NULL) + SET_RUNTIME_PM_OPS(cdns_spi_runtime_suspend, + cdns_spi_runtime_resume, NULL) SET_SYSTEM_SLEEP_PM_OPS(cdns_spi_suspend, cdns_spi_resume) }; diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index 0bef5ce08094..c005ed26a3e1 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -9,6 +9,7 @@ #include <linux/clk.h> #include <linux/gpio/consumer.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/regmap.h> @@ -89,6 +90,7 @@ static irqreturn_t spi_clps711x_isr(int irq, void *dev_id) static int spi_clps711x_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct spi_clps711x_data *hw; struct spi_master *master; int irq, ret; @@ -117,8 +119,7 @@ static int spi_clps711x_probe(struct platform_device *pdev) goto err_out; } - hw->syscon = - syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon3"); + hw->syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); if (IS_ERR(hw->syscon)) { ret = PTR_ERR(hw->syscon); goto err_out; diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 9851551ebbe0..46ae46a944c5 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -876,6 +876,10 @@ static int fsl_qspi_probe(struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI-memory"); + if (!res) { + ret = -EINVAL; + goto err_put_ctrl; + } q->memmap_phy = res->start; /* Since there are 4 cs, map size required is 4 times ahb_buf_size */ q->ahb_addr = devm_ioremap(dev, q->memmap_phy, diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index 5f05d519fbbd..71376b6df89d 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -731,7 +731,7 @@ static int img_spfi_resume(struct device *dev) int ret; ret = pm_runtime_get_sync(dev); - if (ret) { + if (ret < 0) { pm_runtime_put_noidle(dev); return ret; } diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index b2dd0a4d2446..bc97337fddf5 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -18,7 +18,6 @@ #include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> #include <linux/types.h> #include <linux/of.h> #include <linux/of_device.h> @@ -32,6 +31,12 @@ static bool use_dma = true; module_param(use_dma, bool, 0644); MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)"); +/* define polling limits */ +static unsigned int polling_limit_us = 30; +module_param(polling_limit_us, uint, 0664); +MODULE_PARM_DESC(polling_limit_us, + "time in us to run a transfer in polling mode\n"); + #define MXC_RPM_TIMEOUT 2000 /* 2000ms */ #define MXC_CSPIRXDATA 0x00 @@ -64,15 +69,15 @@ enum spi_imx_devtype { struct spi_imx_data; struct spi_imx_devtype_data { - void (*intctrl)(struct spi_imx_data *, int); - int (*prepare_message)(struct spi_imx_data *, struct spi_message *); - int (*prepare_transfer)(struct spi_imx_data *, struct spi_device *); - void (*trigger)(struct spi_imx_data *); - int (*rx_available)(struct spi_imx_data *); - void (*reset)(struct spi_imx_data *); - void (*setup_wml)(struct spi_imx_data *); - void (*disable)(struct spi_imx_data *); - void (*disable_dma)(struct spi_imx_data *); + void (*intctrl)(struct spi_imx_data *spi_imx, int enable); + int (*prepare_message)(struct spi_imx_data *spi_imx, struct spi_message *msg); + int (*prepare_transfer)(struct spi_imx_data *spi_imx, struct spi_device *spi); + void (*trigger)(struct spi_imx_data *spi_imx); + int (*rx_available)(struct spi_imx_data *spi_imx); + void (*reset)(struct spi_imx_data *spi_imx); + void (*setup_wml)(struct spi_imx_data *spi_imx); + void (*disable)(struct spi_imx_data *spi_imx); + void (*disable_dma)(struct spi_imx_data *spi_imx); bool has_dmamode; bool has_slavemode; unsigned int fifo_size; @@ -86,7 +91,7 @@ struct spi_imx_devtype_data { }; struct spi_imx_data { - struct spi_bitbang bitbang; + struct spi_controller *controller; struct device *dev; struct completion xfer_done; @@ -102,12 +107,13 @@ struct spi_imx_data { unsigned int spi_drctl; unsigned int count, remainder; - void (*tx)(struct spi_imx_data *); - void (*rx)(struct spi_imx_data *); + void (*tx)(struct spi_imx_data *spi_imx); + void (*rx)(struct spi_imx_data *spi_imx); void *rx_buf; const void *tx_buf; unsigned int txfifo; /* number of words pushed in tx FIFO */ unsigned int dynamic_burst; + bool rx_only; /* Slave mode */ bool slave_mode; @@ -225,15 +231,15 @@ static int spi_imx_bytes_per_word(const int bits_per_word) return 4; } -static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, +static bool spi_imx_can_dma(struct spi_controller *controller, struct spi_device *spi, struct spi_transfer *transfer) { - struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller); - if (!use_dma || master->fallback) + if (!use_dma || controller->fallback) return false; - if (!master->dma_rx) + if (!controller->dma_rx) return false; if (spi_imx->slave_mode) @@ -289,17 +295,16 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, static void spi_imx_buf_rx_swap_u32(struct spi_imx_data *spi_imx) { unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); -#ifdef __LITTLE_ENDIAN - unsigned int bytes_per_word; -#endif if (spi_imx->rx_buf) { #ifdef __LITTLE_ENDIAN + unsigned int bytes_per_word; + bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word); if (bytes_per_word == 1) - val = cpu_to_be32(val); + swab32s(&val); else if (bytes_per_word == 2) - val = (val << 16) | (val >> 16); + swahw32s(&val); #endif *(u32 *)spi_imx->rx_buf = val; spi_imx->rx_buf += sizeof(u32); @@ -353,9 +358,9 @@ static void spi_imx_buf_tx_swap_u32(struct spi_imx_data *spi_imx) bytes_per_word = spi_imx_bytes_per_word(spi_imx->bits_per_word); if (bytes_per_word == 1) - val = cpu_to_be32(val); + swab32s(&val); else if (bytes_per_word == 2) - val = (val << 16) | (val >> 16); + swahw32s(&val); #endif writel(val, spi_imx->base + MXC_CSPITXDATA); } @@ -469,7 +474,7 @@ static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx, static void mx51_ecspi_intctrl(struct spi_imx_data *spi_imx, int enable) { - unsigned val = 0; + unsigned int val = 0; if (enable & MXC_INT_TE) val |= MX51_ECSPI_INT_TEEN; @@ -515,6 +520,7 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, u32 min_speed_hz = ~0U; u32 testreg, delay; u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG); + u32 current_cfg = cfg; /* set Master or Slave mode */ if (spi_imx->slave_mode) @@ -554,11 +560,6 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, else cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi->chip_select); - if (spi->mode & SPI_CPHA) - cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select); - else - cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select); - if (spi->mode & SPI_CPOL) { cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi->chip_select); cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi->chip_select); @@ -572,6 +573,9 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, else cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi->chip_select); + if (cfg == current_cfg) + return 0; + writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); /* @@ -585,7 +589,7 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, * the SPI communication as the device on the other end would consider * the change of SCLK polarity as a clock tick already. * - * Because spi_imx->spi_bus_clk is only set in bitbang prepare_message + * Because spi_imx->spi_bus_clk is only set in prepare_message * callback, iterate over all the transfers in spi_message, find the * one with lowest bus frequency, and use that bus frequency for the * delay calculation. In case all transfers have speed_hz == 0, then @@ -606,6 +610,24 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, return 0; } +static void mx51_configure_cpha(struct spi_imx_data *spi_imx, + struct spi_device *spi) +{ + bool cpha = (spi->mode & SPI_CPHA); + bool flip_cpha = (spi->mode & SPI_RX_CPHA_FLIP) && spi_imx->rx_only; + u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG); + + /* Flip cpha logical value iff flip_cpha */ + cpha ^= flip_cpha; + + if (cpha) + cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select); + else + cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi->chip_select); + + writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); +} + static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, struct spi_device *spi) { @@ -627,6 +649,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk); spi_imx->spi_bus_clk = clk; + mx51_configure_cpha(spi_imx, spi); + /* * ERR009165: work in XHC mode instead of SMC as PIO on the chips * before i.mx6ul. @@ -1153,12 +1177,12 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int spi_imx_dma_configure(struct spi_master *master) +static int spi_imx_dma_configure(struct spi_controller *controller) { int ret; enum dma_slave_buswidth buswidth; struct dma_slave_config rx = {}, tx = {}; - struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller); switch (spi_imx_bytes_per_word(spi_imx->bits_per_word)) { case 4: @@ -1178,7 +1202,7 @@ static int spi_imx_dma_configure(struct spi_master *master) tx.dst_addr = spi_imx->base_phys + MXC_CSPITXDATA; tx.dst_addr_width = buswidth; tx.dst_maxburst = spi_imx->wml; - ret = dmaengine_slave_config(master->dma_tx, &tx); + ret = dmaengine_slave_config(controller->dma_tx, &tx); if (ret) { dev_err(spi_imx->dev, "TX dma configuration failed with %d\n", ret); return ret; @@ -1188,7 +1212,7 @@ static int spi_imx_dma_configure(struct spi_master *master) rx.src_addr = spi_imx->base_phys + MXC_CSPIRXDATA; rx.src_addr_width = buswidth; rx.src_maxburst = spi_imx->wml; - ret = dmaengine_slave_config(master->dma_rx, &rx); + ret = dmaengine_slave_config(controller->dma_rx, &rx); if (ret) { dev_err(spi_imx->dev, "RX dma configuration failed with %d\n", ret); return ret; @@ -1200,7 +1224,7 @@ static int spi_imx_dma_configure(struct spi_master *master) static int spi_imx_setupxfer(struct spi_device *spi, struct spi_transfer *t) { - struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller); if (!t) return 0; @@ -1246,11 +1270,14 @@ static int spi_imx_setupxfer(struct spi_device *spi, spi_imx->dynamic_burst = 0; } - if (spi_imx_can_dma(spi_imx->bitbang.master, spi, t)) + if (spi_imx_can_dma(spi_imx->controller, spi, t)) spi_imx->usedma = true; else spi_imx->usedma = false; + spi_imx->rx_only = ((t->tx_buf == NULL) + || (t->tx_buf == spi->controller->dummy_tx)); + if (is_imx53_ecspi(spi_imx) && spi_imx->slave_mode) { spi_imx->rx = mx53_ecspi_rx_slave; spi_imx->tx = mx53_ecspi_tx_slave; @@ -1264,50 +1291,50 @@ static int spi_imx_setupxfer(struct spi_device *spi, static void spi_imx_sdma_exit(struct spi_imx_data *spi_imx) { - struct spi_master *master = spi_imx->bitbang.master; + struct spi_controller *controller = spi_imx->controller; - if (master->dma_rx) { - dma_release_channel(master->dma_rx); - master->dma_rx = NULL; + if (controller->dma_rx) { + dma_release_channel(controller->dma_rx); + controller->dma_rx = NULL; } - if (master->dma_tx) { - dma_release_channel(master->dma_tx); - master->dma_tx = NULL; + if (controller->dma_tx) { + dma_release_channel(controller->dma_tx); + controller->dma_tx = NULL; } } static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, - struct spi_master *master) + struct spi_controller *controller) { int ret; spi_imx->wml = spi_imx->devtype_data->fifo_size / 2; /* Prepare for TX DMA: */ - master->dma_tx = dma_request_chan(dev, "tx"); - if (IS_ERR(master->dma_tx)) { - ret = PTR_ERR(master->dma_tx); + controller->dma_tx = dma_request_chan(dev, "tx"); + if (IS_ERR(controller->dma_tx)) { + ret = PTR_ERR(controller->dma_tx); dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret); - master->dma_tx = NULL; + controller->dma_tx = NULL; goto err; } /* Prepare for RX : */ - master->dma_rx = dma_request_chan(dev, "rx"); - if (IS_ERR(master->dma_rx)) { - ret = PTR_ERR(master->dma_rx); + controller->dma_rx = dma_request_chan(dev, "rx"); + if (IS_ERR(controller->dma_rx)) { + ret = PTR_ERR(controller->dma_rx); dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret); - master->dma_rx = NULL; + controller->dma_rx = NULL; goto err; } init_completion(&spi_imx->dma_rx_completion); init_completion(&spi_imx->dma_tx_completion); - master->can_dma = spi_imx_can_dma; - master->max_dma_len = MAX_SDMA_BD_BYTES; - spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX | - SPI_MASTER_MUST_TX; + controller->can_dma = spi_imx_can_dma; + controller->max_dma_len = MAX_SDMA_BD_BYTES; + spi_imx->controller->flags = SPI_CONTROLLER_MUST_RX | + SPI_CONTROLLER_MUST_TX; return 0; err: @@ -1349,7 +1376,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, struct dma_async_tx_descriptor *desc_tx, *desc_rx; unsigned long transfer_timeout; unsigned long timeout; - struct spi_master *master = spi_imx->bitbang.master; + struct spi_controller *controller = spi_imx->controller; struct sg_table *tx = &transfer->tx_sg, *rx = &transfer->rx_sg; struct scatterlist *last_sg = sg_last(rx->sgl, rx->nents); unsigned int bytes_per_word, i; @@ -1367,7 +1394,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, spi_imx->wml = i; - ret = spi_imx_dma_configure(master); + ret = spi_imx_dma_configure(controller); if (ret) goto dma_failure_no_start; @@ -1382,7 +1409,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, * The TX DMA setup starts the transfer, so make sure RX is configured * before TX. */ - desc_rx = dmaengine_prep_slave_sg(master->dma_rx, + desc_rx = dmaengine_prep_slave_sg(controller->dma_rx, rx->sgl, rx->nents, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_rx) { @@ -1394,14 +1421,14 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, desc_rx->callback_param = (void *)spi_imx; dmaengine_submit(desc_rx); reinit_completion(&spi_imx->dma_rx_completion); - dma_async_issue_pending(master->dma_rx); + dma_async_issue_pending(controller->dma_rx); - desc_tx = dmaengine_prep_slave_sg(master->dma_tx, + desc_tx = dmaengine_prep_slave_sg(controller->dma_tx, tx->sgl, tx->nents, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc_tx) { - dmaengine_terminate_all(master->dma_tx); - dmaengine_terminate_all(master->dma_rx); + dmaengine_terminate_all(controller->dma_tx); + dmaengine_terminate_all(controller->dma_rx); return -EINVAL; } @@ -1409,7 +1436,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, desc_tx->callback_param = (void *)spi_imx; dmaengine_submit(desc_tx); reinit_completion(&spi_imx->dma_tx_completion); - dma_async_issue_pending(master->dma_tx); + dma_async_issue_pending(controller->dma_tx); transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len); @@ -1418,21 +1445,21 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, transfer_timeout); if (!timeout) { dev_err(spi_imx->dev, "I/O Error in DMA TX\n"); - dmaengine_terminate_all(master->dma_tx); - dmaengine_terminate_all(master->dma_rx); + dmaengine_terminate_all(controller->dma_tx); + dmaengine_terminate_all(controller->dma_rx); return -ETIMEDOUT; } timeout = wait_for_completion_timeout(&spi_imx->dma_rx_completion, transfer_timeout); if (!timeout) { - dev_err(&master->dev, "I/O Error in DMA RX\n"); + dev_err(&controller->dev, "I/O Error in DMA RX\n"); spi_imx->devtype_data->reset(spi_imx); - dmaengine_terminate_all(master->dma_rx); + dmaengine_terminate_all(controller->dma_rx); return -ETIMEDOUT; } - return transfer->len; + return 0; /* fallback to pio */ dma_failure_no_start: transfer->error |= SPI_TRANS_FAIL_NO_START; @@ -1442,7 +1469,7 @@ dma_failure_no_start: static int spi_imx_pio_transfer(struct spi_device *spi, struct spi_transfer *transfer) { - struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller); unsigned long transfer_timeout; unsigned long timeout; @@ -1468,14 +1495,62 @@ static int spi_imx_pio_transfer(struct spi_device *spi, return -ETIMEDOUT; } - return transfer->len; + return 0; +} + +static int spi_imx_poll_transfer(struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller); + unsigned long timeout; + + spi_imx->tx_buf = transfer->tx_buf; + spi_imx->rx_buf = transfer->rx_buf; + spi_imx->count = transfer->len; + spi_imx->txfifo = 0; + spi_imx->remainder = 0; + + /* fill in the fifo before timeout calculations if we are + * interrupted here, then the data is getting transferred by + * the HW while we are interrupted + */ + spi_imx_push(spi_imx); + + timeout = spi_imx_calculate_timeout(spi_imx, transfer->len) + jiffies; + while (spi_imx->txfifo) { + /* RX */ + while (spi_imx->txfifo && + spi_imx->devtype_data->rx_available(spi_imx)) { + spi_imx->rx(spi_imx); + spi_imx->txfifo--; + } + + /* TX */ + if (spi_imx->count) { + spi_imx_push(spi_imx); + continue; + } + + if (spi_imx->txfifo && + time_after(jiffies, timeout)) { + + dev_err_ratelimited(&spi->dev, + "timeout period reached: jiffies: %lu- falling back to interrupt mode\n", + jiffies - timeout); + + /* fall back to interrupt mode */ + return spi_imx_pio_transfer(spi, transfer); + } + } + + return 0; } static int spi_imx_pio_transfer_slave(struct spi_device *spi, struct spi_transfer *transfer) { - struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); - int ret = transfer->len; + struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller); + int ret = 0; if (is_imx53_ecspi(spi_imx) && transfer->len > MX53_MAX_TRANSFER_BYTES) { @@ -1515,11 +1590,14 @@ static int spi_imx_pio_transfer_slave(struct spi_device *spi, return ret; } -static int spi_imx_transfer(struct spi_device *spi, +static int spi_imx_transfer_one(struct spi_controller *controller, + struct spi_device *spi, struct spi_transfer *transfer) { - struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); + struct spi_imx_data *spi_imx = spi_controller_get_devdata(spi->controller); + unsigned long hz_per_byte, byte_limit; + spi_imx_setupxfer(spi, transfer); transfer->effective_speed_hz = spi_imx->spi_bus_clk; /* flush rxfifo before transfer */ @@ -1529,6 +1607,17 @@ static int spi_imx_transfer(struct spi_device *spi, if (spi_imx->slave_mode) return spi_imx_pio_transfer_slave(spi, transfer); + /* + * Calculate the estimated time in us the transfer runs. Find + * the number of Hz per byte per polling limit. + */ + hz_per_byte = polling_limit_us ? ((8 + 4) * USEC_PER_SEC) / polling_limit_us : 0; + byte_limit = hz_per_byte ? transfer->effective_speed_hz / hz_per_byte : 1; + + /* run in polling mode for short transfers */ + if (transfer->len < byte_limit) + return spi_imx_poll_transfer(spi, transfer); + if (spi_imx->usedma) return spi_imx_dma_transfer(spi_imx, transfer); @@ -1548,14 +1637,13 @@ static void spi_imx_cleanup(struct spi_device *spi) } static int -spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg) +spi_imx_prepare_message(struct spi_controller *controller, struct spi_message *msg) { - struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller); int ret; - ret = pm_runtime_get_sync(spi_imx->dev); + ret = pm_runtime_resume_and_get(spi_imx->dev); if (ret < 0) { - pm_runtime_put_noidle(spi_imx->dev); dev_err(spi_imx->dev, "failed to enable clock\n"); return ret; } @@ -1570,18 +1658,18 @@ spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg) } static int -spi_imx_unprepare_message(struct spi_master *master, struct spi_message *msg) +spi_imx_unprepare_message(struct spi_controller *controller, struct spi_message *msg) { - struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller); pm_runtime_mark_last_busy(spi_imx->dev); pm_runtime_put_autosuspend(spi_imx->dev); return 0; } -static int spi_imx_slave_abort(struct spi_master *master) +static int spi_imx_slave_abort(struct spi_controller *controller) { - struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller); spi_imx->slave_aborted = true; complete(&spi_imx->xfer_done); @@ -1592,7 +1680,7 @@ static int spi_imx_slave_abort(struct spi_master *master) static int spi_imx_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct spi_master *master; + struct spi_controller *controller; struct spi_imx_data *spi_imx; struct resource *res; int ret, irq, spi_drctl; @@ -1604,12 +1692,12 @@ static int spi_imx_probe(struct platform_device *pdev) slave_mode = devtype_data->has_slavemode && of_property_read_bool(np, "spi-slave"); if (slave_mode) - master = spi_alloc_slave(&pdev->dev, - sizeof(struct spi_imx_data)); + controller = spi_alloc_slave(&pdev->dev, + sizeof(struct spi_imx_data)); else - master = spi_alloc_master(&pdev->dev, - sizeof(struct spi_imx_data)); - if (!master) + controller = spi_alloc_master(&pdev->dev, + sizeof(struct spi_imx_data)); + if (!controller) return -ENOMEM; ret = of_property_read_u32(np, "fsl,spi-rdy-drctl", &spi_drctl); @@ -1618,14 +1706,14 @@ static int spi_imx_probe(struct platform_device *pdev) spi_drctl = 0; } - platform_set_drvdata(pdev, master); + platform_set_drvdata(pdev, controller); - master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); - master->bus_num = np ? -1 : pdev->id; - master->use_gpio_descriptors = true; + controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); + controller->bus_num = np ? -1 : pdev->id; + controller->use_gpio_descriptors = true; - spi_imx = spi_master_get_devdata(master); - spi_imx->bitbang.master = master; + spi_imx = spi_controller_get_devdata(controller); + spi_imx->controller = controller; spi_imx->dev = &pdev->dev; spi_imx->slave_mode = slave_mode; @@ -1638,22 +1726,24 @@ static int spi_imx_probe(struct platform_device *pdev) * board files have <= 3 chip selects. */ if (!device_property_read_u32(&pdev->dev, "num-cs", &val)) - master->num_chipselect = val; + controller->num_chipselect = val; else - master->num_chipselect = 3; - - spi_imx->bitbang.setup_transfer = spi_imx_setupxfer; - spi_imx->bitbang.txrx_bufs = spi_imx_transfer; - spi_imx->bitbang.master->setup = spi_imx_setup; - spi_imx->bitbang.master->cleanup = spi_imx_cleanup; - spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message; - spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message; - spi_imx->bitbang.master->slave_abort = spi_imx_slave_abort; - spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ - | SPI_NO_CS; + controller->num_chipselect = 3; + + spi_imx->controller->transfer_one = spi_imx_transfer_one; + spi_imx->controller->setup = spi_imx_setup; + spi_imx->controller->cleanup = spi_imx_cleanup; + spi_imx->controller->prepare_message = spi_imx_prepare_message; + spi_imx->controller->unprepare_message = spi_imx_unprepare_message; + spi_imx->controller->slave_abort = spi_imx_slave_abort; + spi_imx->controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS; + if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) - spi_imx->bitbang.master->mode_bits |= SPI_LOOP | SPI_READY; + spi_imx->controller->mode_bits |= SPI_LOOP | SPI_READY; + + if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) + spi_imx->controller->mode_bits |= SPI_RX_CPHA_FLIP; if (is_imx51_ecspi(spi_imx) && device_property_read_u32(&pdev->dev, "cs-gpios", NULL)) @@ -1662,7 +1752,7 @@ static int spi_imx_probe(struct platform_device *pdev) * setting the burst length to the word size. This is * considerably faster than manually controlling the CS. */ - spi_imx->bitbang.master->mode_bits |= SPI_CS_WORD; + spi_imx->controller->mode_bits |= SPI_CS_WORD; spi_imx->spi_drctl = spi_drctl; @@ -1672,38 +1762,38 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(spi_imx->base)) { ret = PTR_ERR(spi_imx->base); - goto out_master_put; + goto out_controller_put; } spi_imx->base_phys = res->start; irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = irq; - goto out_master_put; + goto out_controller_put; } ret = devm_request_irq(&pdev->dev, irq, spi_imx_isr, 0, dev_name(&pdev->dev), spi_imx); if (ret) { dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret); - goto out_master_put; + goto out_controller_put; } spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(spi_imx->clk_ipg)) { ret = PTR_ERR(spi_imx->clk_ipg); - goto out_master_put; + goto out_controller_put; } spi_imx->clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(spi_imx->clk_per)) { ret = PTR_ERR(spi_imx->clk_per); - goto out_master_put; + goto out_controller_put; } ret = clk_prepare_enable(spi_imx->clk_per); if (ret) - goto out_master_put; + goto out_controller_put; ret = clk_prepare_enable(spi_imx->clk_ipg); if (ret) @@ -1721,7 +1811,7 @@ static int spi_imx_probe(struct platform_device *pdev) * if validated on other chips. */ if (spi_imx->devtype_data->has_dmamode) { - ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master); + ret = spi_imx_sdma_init(&pdev->dev, spi_imx, controller); if (ret == -EPROBE_DEFER) goto out_runtime_pm_put; @@ -1734,11 +1824,11 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->devtype_data->intctrl(spi_imx, 0); - master->dev.of_node = pdev->dev.of_node; - ret = spi_bitbang_start(&spi_imx->bitbang); + controller->dev.of_node = pdev->dev.of_node; + ret = spi_register_controller(controller); if (ret) { - dev_err_probe(&pdev->dev, ret, "bitbang start failed\n"); - goto out_bitbang_start; + dev_err_probe(&pdev->dev, ret, "register controller failed\n"); + goto out_register_controller; } pm_runtime_mark_last_busy(spi_imx->dev); @@ -1746,7 +1836,7 @@ static int spi_imx_probe(struct platform_device *pdev) return ret; -out_bitbang_start: +out_register_controller: if (spi_imx->devtype_data->has_dmamode) spi_imx_sdma_exit(spi_imx); out_runtime_pm_put: @@ -1757,23 +1847,22 @@ out_runtime_pm_put: clk_disable_unprepare(spi_imx->clk_ipg); out_put_per: clk_disable_unprepare(spi_imx->clk_per); -out_master_put: - spi_master_put(master); +out_controller_put: + spi_controller_put(controller); return ret; } static int spi_imx_remove(struct platform_device *pdev) { - struct spi_master *master = platform_get_drvdata(pdev); - struct spi_imx_data *spi_imx = spi_master_get_devdata(master); + struct spi_controller *controller = platform_get_drvdata(pdev); + struct spi_imx_data *spi_imx = spi_controller_get_devdata(controller); int ret; - spi_bitbang_stop(&spi_imx->bitbang); + spi_unregister_controller(controller); - ret = pm_runtime_get_sync(spi_imx->dev); + ret = pm_runtime_resume_and_get(spi_imx->dev); if (ret < 0) { - pm_runtime_put_noidle(spi_imx->dev); dev_err(spi_imx->dev, "failed to enable clock\n"); return ret; } @@ -1785,18 +1874,17 @@ static int spi_imx_remove(struct platform_device *pdev) pm_runtime_disable(spi_imx->dev); spi_imx_sdma_exit(spi_imx); - spi_master_put(master); return 0; } static int __maybe_unused spi_imx_runtime_resume(struct device *dev) { - struct spi_master *master = dev_get_drvdata(dev); + struct spi_controller *controller = dev_get_drvdata(dev); struct spi_imx_data *spi_imx; int ret; - spi_imx = spi_master_get_devdata(master); + spi_imx = spi_controller_get_devdata(controller); ret = clk_prepare_enable(spi_imx->clk_per); if (ret) @@ -1813,10 +1901,10 @@ static int __maybe_unused spi_imx_runtime_resume(struct device *dev) static int __maybe_unused spi_imx_runtime_suspend(struct device *dev) { - struct spi_master *master = dev_get_drvdata(dev); + struct spi_controller *controller = dev_get_drvdata(dev); struct spi_imx_data *spi_imx; - spi_imx = spi_master_get_devdata(master); + spi_imx = spi_controller_get_devdata(controller); clk_disable_unprepare(spi_imx->clk_per); clk_disable_unprepare(spi_imx->clk_ipg); diff --git a/drivers/spi/spi-ingenic.c b/drivers/spi/spi-ingenic.c index 03077a7e11c8..713a238bee63 100644 --- a/drivers/spi/spi-ingenic.c +++ b/drivers/spi/spi-ingenic.c @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SPI bus driver for the Ingenic JZ47xx SoCs + * SPI bus driver for the Ingenic SoCs * Copyright (c) 2017-2021 Artur Rojek <contact@artur-rojek.eu> * Copyright (c) 2017-2021 Paul Cercueil <paul@crapouillou.net> + * Copyright (c) 2022 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> */ #include <linux/clk.h> @@ -52,6 +53,9 @@ struct jz_soc_info { u32 bits_per_word_mask; struct reg_field flen_field; bool has_trendian; + + unsigned int max_speed_hz; + unsigned int max_native_cs; }; struct ingenic_spi { @@ -380,7 +384,7 @@ static int spi_ingenic_probe(struct platform_device *pdev) struct spi_controller *ctlr; struct ingenic_spi *priv; void __iomem *base; - int ret; + int num_cs, ret; pdata = of_device_get_match_data(dev); if (!pdata) { @@ -416,6 +420,9 @@ static int spi_ingenic_probe(struct platform_device *pdev) if (IS_ERR(priv->flen_field)) return PTR_ERR(priv->flen_field); + if (device_property_read_u32(dev, "num-cs", &num_cs)) + num_cs = pdata->max_native_cs; + platform_set_drvdata(pdev, ctlr); ctlr->prepare_transfer_hardware = spi_ingenic_prepare_hardware; @@ -428,8 +435,10 @@ static int spi_ingenic_probe(struct platform_device *pdev) ctlr->max_dma_len = SPI_INGENIC_FIFO_SIZE; ctlr->bits_per_word_mask = pdata->bits_per_word_mask; ctlr->min_speed_hz = 7200; - ctlr->max_speed_hz = 54000000; - ctlr->num_chipselect = 2; + ctlr->max_speed_hz = pdata->max_speed_hz; + ctlr->use_gpio_descriptors = true; + ctlr->max_native_cs = pdata->max_native_cs; + ctlr->num_chipselect = num_cs; ctlr->dev.of_node = pdev->dev.of_node; if (spi_ingenic_request_dma(ctlr, dev)) @@ -452,17 +461,44 @@ static const struct jz_soc_info jz4750_soc_info = { .bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 17), .flen_field = REG_FIELD(REG_SSICR1, 4, 7), .has_trendian = false, + + .max_speed_hz = 54000000, + .max_native_cs = 2, }; static const struct jz_soc_info jz4780_soc_info = { .bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 32), .flen_field = REG_FIELD(REG_SSICR1, 3, 7), .has_trendian = true, + + .max_speed_hz = 54000000, + .max_native_cs = 2, +}; + +static const struct jz_soc_info x1000_soc_info = { + .bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 32), + .flen_field = REG_FIELD(REG_SSICR1, 3, 7), + .has_trendian = true, + + .max_speed_hz = 50000000, + .max_native_cs = 2, +}; + +static const struct jz_soc_info x2000_soc_info = { + .bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 32), + .flen_field = REG_FIELD(REG_SSICR1, 3, 7), + .has_trendian = true, + + .max_speed_hz = 50000000, + .max_native_cs = 1, }; static const struct of_device_id spi_ingenic_of_match[] = { { .compatible = "ingenic,jz4750-spi", .data = &jz4750_soc_info }, + { .compatible = "ingenic,jz4775-spi", .data = &jz4780_soc_info }, { .compatible = "ingenic,jz4780-spi", .data = &jz4780_soc_info }, + { .compatible = "ingenic,x1000-spi", .data = &x1000_soc_info }, + { .compatible = "ingenic,x2000-spi", .data = &x2000_soc_info }, {} }; MODULE_DEVICE_TABLE(of, spi_ingenic_of_match); @@ -476,7 +512,8 @@ static struct platform_driver spi_ingenic_driver = { }; module_platform_driver(spi_ingenic_driver); -MODULE_DESCRIPTION("SPI bus driver for the Ingenic JZ47xx SoCs"); +MODULE_DESCRIPTION("SPI bus driver for the Ingenic SoCs"); MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>"); MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); +MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-intel.c b/drivers/spi/spi-intel.c index e937cfe85559..50f42983b950 100644 --- a/drivers/spi/spi-intel.c +++ b/drivers/spi/spi-intel.c @@ -779,10 +779,59 @@ static const char *intel_spi_get_name(struct spi_mem *mem) return dev_name(ispi->dev); } +static int intel_spi_dirmap_create(struct spi_mem_dirmap_desc *desc) +{ + struct intel_spi *ispi = spi_master_get_devdata(desc->mem->spi->master); + const struct intel_spi_mem_op *iop; + + iop = intel_spi_match_mem_op(ispi, &desc->info.op_tmpl); + if (!iop) + return -EOPNOTSUPP; + + desc->priv = (void *)iop; + return 0; +} + +static ssize_t intel_spi_dirmap_read(struct spi_mem_dirmap_desc *desc, u64 offs, + size_t len, void *buf) +{ + struct intel_spi *ispi = spi_master_get_devdata(desc->mem->spi->master); + const struct intel_spi_mem_op *iop = desc->priv; + struct spi_mem_op op = desc->info.op_tmpl; + int ret; + + /* Fill in the gaps */ + op.addr.val = offs; + op.data.nbytes = len; + op.data.buf.in = buf; + + ret = iop->exec_op(ispi, iop, &op); + return ret ? ret : len; +} + +static ssize_t intel_spi_dirmap_write(struct spi_mem_dirmap_desc *desc, u64 offs, + size_t len, const void *buf) +{ + struct intel_spi *ispi = spi_master_get_devdata(desc->mem->spi->master); + const struct intel_spi_mem_op *iop = desc->priv; + struct spi_mem_op op = desc->info.op_tmpl; + int ret; + + op.addr.val = offs; + op.data.nbytes = len; + op.data.buf.out = buf; + + ret = iop->exec_op(ispi, iop, &op); + return ret ? ret : len; +} + static const struct spi_controller_mem_ops intel_spi_mem_ops = { .supports_op = intel_spi_supports_mem_op, .exec_op = intel_spi_exec_mem_op, .get_name = intel_spi_get_name, + .dirmap_create = intel_spi_dirmap_create, + .dirmap_read = intel_spi_dirmap_read, + .dirmap_write = intel_spi_dirmap_write, }; #define INTEL_SPI_OP_ADDR(__nbytes) \ @@ -1205,7 +1254,7 @@ static int intel_spi_populate_chip(struct intel_spi *ispi) * intel_spi_probe() - Probe the Intel SPI flash controller * @dev: Pointer to the parent device * @mem: MMIO resource - * @info: Platform spefific information + * @info: Platform specific information * * Probes Intel SPI flash controller and creates the flash chip device. * Returns %0 on success and negative errno in case of failure. diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 0e8dafc62d94..e8de4f5017cd 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -10,6 +10,7 @@ #include <linux/pm_runtime.h> #include <linux/spi/spi.h> #include <linux/spi/spi-mem.h> +#include <linux/sched/task_stack.h> #include "internals.h" @@ -211,6 +212,15 @@ static int spi_mem_check_op(const struct spi_mem_op *op) !spi_mem_buswidth_is_valid(op->data.buswidth)) return -EINVAL; + /* Buffers must be DMA-able. */ + if (WARN_ON_ONCE(op->data.dir == SPI_MEM_DATA_IN && + object_is_on_stack(op->data.buf.in))) + return -EINVAL; + + if (WARN_ON_ONCE(op->data.dir == SPI_MEM_DATA_OUT && + object_is_on_stack(op->data.buf.out))) + return -EINVAL; + return 0; } @@ -262,9 +272,8 @@ static int spi_mem_access_start(struct spi_mem *mem) if (ctlr->auto_runtime_pm) { int ret; - ret = pm_runtime_get_sync(ctlr->dev.parent); + ret = pm_runtime_resume_and_get(ctlr->dev.parent); if (ret < 0) { - pm_runtime_put_noidle(ctlr->dev.parent); dev_err(&ctlr->dev, "Failed to power device: %d\n", ret); return ret; diff --git a/drivers/spi/spi-mpc52xx-psc.c b/drivers/spi/spi-mpc52xx-psc.c index 21ef5d481faf..7654736c2c0e 100644 --- a/drivers/spi/spi-mpc52xx-psc.c +++ b/drivers/spi/spi-mpc52xx-psc.c @@ -20,6 +20,7 @@ #include <linux/spi/spi.h> #include <linux/fsl_devices.h> #include <linux/slab.h> +#include <linux/of_irq.h> #include <asm/mpc52xx.h> #include <asm/mpc52xx_psc.h> diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c index 51041526546d..3ebdce804b90 100644 --- a/drivers/spi/spi-mpc52xx.c +++ b/drivers/spi/spi-mpc52xx.c @@ -19,6 +19,9 @@ #include <linux/io.h> #include <linux/of_gpio.h> #include <linux/slab.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + #include <asm/time.h> #include <asm/mpc52xx.h> diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 1a0b3208dfca..0a3b9f7eed30 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -17,105 +17,148 @@ #include <linux/platform_data/spi-mt65xx.h> #include <linux/pm_runtime.h> #include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> #include <linux/dma-mapping.h> -#define SPI_CFG0_REG 0x0000 -#define SPI_CFG1_REG 0x0004 -#define SPI_TX_SRC_REG 0x0008 -#define SPI_RX_DST_REG 0x000c -#define SPI_TX_DATA_REG 0x0010 -#define SPI_RX_DATA_REG 0x0014 -#define SPI_CMD_REG 0x0018 -#define SPI_STATUS0_REG 0x001c -#define SPI_PAD_SEL_REG 0x0024 -#define SPI_CFG2_REG 0x0028 -#define SPI_TX_SRC_REG_64 0x002c -#define SPI_RX_DST_REG_64 0x0030 -#define SPI_CFG3_IPM_REG 0x0040 - -#define SPI_CFG0_SCK_HIGH_OFFSET 0 -#define SPI_CFG0_SCK_LOW_OFFSET 8 -#define SPI_CFG0_CS_HOLD_OFFSET 16 -#define SPI_CFG0_CS_SETUP_OFFSET 24 -#define SPI_ADJUST_CFG0_CS_HOLD_OFFSET 0 -#define SPI_ADJUST_CFG0_CS_SETUP_OFFSET 16 - -#define SPI_CFG1_CS_IDLE_OFFSET 0 -#define SPI_CFG1_PACKET_LOOP_OFFSET 8 -#define SPI_CFG1_PACKET_LENGTH_OFFSET 16 -#define SPI_CFG1_GET_TICK_DLY_OFFSET 29 -#define SPI_CFG1_GET_TICK_DLY_OFFSET_V1 30 - -#define SPI_CFG1_GET_TICK_DLY_MASK 0xe0000000 -#define SPI_CFG1_GET_TICK_DLY_MASK_V1 0xc0000000 - -#define SPI_CFG1_CS_IDLE_MASK 0xff -#define SPI_CFG1_PACKET_LOOP_MASK 0xff00 -#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 -#define SPI_CFG1_IPM_PACKET_LENGTH_MASK GENMASK(31, 16) -#define SPI_CFG2_SCK_HIGH_OFFSET 0 -#define SPI_CFG2_SCK_LOW_OFFSET 16 - -#define SPI_CMD_ACT BIT(0) -#define SPI_CMD_RESUME BIT(1) -#define SPI_CMD_RST BIT(2) -#define SPI_CMD_PAUSE_EN BIT(4) -#define SPI_CMD_DEASSERT BIT(5) -#define SPI_CMD_SAMPLE_SEL BIT(6) -#define SPI_CMD_CS_POL BIT(7) -#define SPI_CMD_CPHA BIT(8) -#define SPI_CMD_CPOL BIT(9) -#define SPI_CMD_RX_DMA BIT(10) -#define SPI_CMD_TX_DMA BIT(11) -#define SPI_CMD_TXMSBF BIT(12) -#define SPI_CMD_RXMSBF BIT(13) -#define SPI_CMD_RX_ENDIAN BIT(14) -#define SPI_CMD_TX_ENDIAN BIT(15) -#define SPI_CMD_FINISH_IE BIT(16) -#define SPI_CMD_PAUSE_IE BIT(17) -#define SPI_CMD_IPM_NONIDLE_MODE BIT(19) -#define SPI_CMD_IPM_SPIM_LOOP BIT(21) -#define SPI_CMD_IPM_GET_TICKDLY_OFFSET 22 +#define SPI_CFG0_REG 0x0000 +#define SPI_CFG1_REG 0x0004 +#define SPI_TX_SRC_REG 0x0008 +#define SPI_RX_DST_REG 0x000c +#define SPI_TX_DATA_REG 0x0010 +#define SPI_RX_DATA_REG 0x0014 +#define SPI_CMD_REG 0x0018 +#define SPI_STATUS0_REG 0x001c +#define SPI_PAD_SEL_REG 0x0024 +#define SPI_CFG2_REG 0x0028 +#define SPI_TX_SRC_REG_64 0x002c +#define SPI_RX_DST_REG_64 0x0030 +#define SPI_CFG3_IPM_REG 0x0040 + +#define SPI_CFG0_SCK_HIGH_OFFSET 0 +#define SPI_CFG0_SCK_LOW_OFFSET 8 +#define SPI_CFG0_CS_HOLD_OFFSET 16 +#define SPI_CFG0_CS_SETUP_OFFSET 24 +#define SPI_ADJUST_CFG0_CS_HOLD_OFFSET 0 +#define SPI_ADJUST_CFG0_CS_SETUP_OFFSET 16 + +#define SPI_CFG1_CS_IDLE_OFFSET 0 +#define SPI_CFG1_PACKET_LOOP_OFFSET 8 +#define SPI_CFG1_PACKET_LENGTH_OFFSET 16 +#define SPI_CFG1_GET_TICK_DLY_OFFSET 29 +#define SPI_CFG1_GET_TICK_DLY_OFFSET_V1 30 + +#define SPI_CFG1_GET_TICK_DLY_MASK 0xe0000000 +#define SPI_CFG1_GET_TICK_DLY_MASK_V1 0xc0000000 + +#define SPI_CFG1_CS_IDLE_MASK 0xff +#define SPI_CFG1_PACKET_LOOP_MASK 0xff00 +#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 +#define SPI_CFG1_IPM_PACKET_LENGTH_MASK GENMASK(31, 16) +#define SPI_CFG2_SCK_HIGH_OFFSET 0 +#define SPI_CFG2_SCK_LOW_OFFSET 16 + +#define SPI_CMD_ACT BIT(0) +#define SPI_CMD_RESUME BIT(1) +#define SPI_CMD_RST BIT(2) +#define SPI_CMD_PAUSE_EN BIT(4) +#define SPI_CMD_DEASSERT BIT(5) +#define SPI_CMD_SAMPLE_SEL BIT(6) +#define SPI_CMD_CS_POL BIT(7) +#define SPI_CMD_CPHA BIT(8) +#define SPI_CMD_CPOL BIT(9) +#define SPI_CMD_RX_DMA BIT(10) +#define SPI_CMD_TX_DMA BIT(11) +#define SPI_CMD_TXMSBF BIT(12) +#define SPI_CMD_RXMSBF BIT(13) +#define SPI_CMD_RX_ENDIAN BIT(14) +#define SPI_CMD_TX_ENDIAN BIT(15) +#define SPI_CMD_FINISH_IE BIT(16) +#define SPI_CMD_PAUSE_IE BIT(17) +#define SPI_CMD_IPM_NONIDLE_MODE BIT(19) +#define SPI_CMD_IPM_SPIM_LOOP BIT(21) +#define SPI_CMD_IPM_GET_TICKDLY_OFFSET 22 #define SPI_CMD_IPM_GET_TICKDLY_MASK GENMASK(24, 22) -#define SPI_CFG3_IPM_HALF_DUPLEX_DIR BIT(2) -#define SPI_CFG3_IPM_HALF_DUPLEX_EN BIT(3) -#define MT8173_SPI_MAX_PAD_SEL 3 -#define MTK_SPI_PAUSE_INT_STATUS 0x2 +#define PIN_MODE_CFG(x) ((x) / 2) -#define MTK_SPI_IDLE 0 -#define MTK_SPI_PAUSED 1 +#define SPI_CFG3_IPM_HALF_DUPLEX_DIR BIT(2) +#define SPI_CFG3_IPM_HALF_DUPLEX_EN BIT(3) +#define SPI_CFG3_IPM_XMODE_EN BIT(4) +#define SPI_CFG3_IPM_NODATA_FLAG BIT(5) +#define SPI_CFG3_IPM_CMD_BYTELEN_OFFSET 8 +#define SPI_CFG3_IPM_ADDR_BYTELEN_OFFSET 12 -#define MTK_SPI_MAX_FIFO_SIZE 32U -#define MTK_SPI_PACKET_SIZE 1024 -#define MTK_SPI_IPM_PACKET_SIZE SZ_64K -#define MTK_SPI_32BITS_MASK (0xffffffff) +#define SPI_CFG3_IPM_CMD_PIN_MODE_MASK GENMASK(1, 0) +#define SPI_CFG3_IPM_CMD_BYTELEN_MASK GENMASK(11, 8) +#define SPI_CFG3_IPM_ADDR_BYTELEN_MASK GENMASK(15, 12) -#define DMA_ADDR_EXT_BITS (36) -#define DMA_ADDR_DEF_BITS (32) +#define MT8173_SPI_MAX_PAD_SEL 3 +#define MTK_SPI_PAUSE_INT_STATUS 0x2 + +#define MTK_SPI_MAX_FIFO_SIZE 32U +#define MTK_SPI_PACKET_SIZE 1024 +#define MTK_SPI_IPM_PACKET_SIZE SZ_64K +#define MTK_SPI_IPM_PACKET_LOOP SZ_256 + +#define MTK_SPI_IDLE 0 +#define MTK_SPI_PAUSED 1 + +#define MTK_SPI_32BITS_MASK (0xffffffff) + +#define DMA_ADDR_EXT_BITS (36) +#define DMA_ADDR_DEF_BITS (32) + +/** + * struct mtk_spi_compatible - device data structure + * @need_pad_sel: Enable pad (pins) selection in SPI controller + * @must_tx: Must explicitly send dummy TX bytes to do RX only transfer + * @enhance_timing: Enable adjusting cfg register to enhance time accuracy + * @dma_ext: DMA address extension supported + * @no_need_unprepare: Don't unprepare the SPI clk during runtime + * @ipm_design: Adjust/extend registers to support IPM design IP features + */ struct mtk_spi_compatible { bool need_pad_sel; - /* Must explicitly send dummy Tx bytes to do Rx only transfer */ bool must_tx; - /* some IC design adjust cfg register to enhance time accuracy */ bool enhance_timing; - /* some IC support DMA addr extension */ bool dma_ext; - /* some IC no need unprepare SPI clk */ bool no_need_unprepare; - /* IPM design adjust and extend register to support more features */ bool ipm_design; - }; +/** + * struct mtk_spi - SPI driver instance + * @base: Start address of the SPI controller registers + * @state: SPI controller state + * @pad_num: Number of pad_sel entries + * @pad_sel: Groups of pins to select + * @parent_clk: Parent of sel_clk + * @sel_clk: SPI master mux clock + * @spi_clk: Peripheral clock + * @spi_hclk: AHB bus clock + * @cur_transfer: Currently processed SPI transfer + * @xfer_len: Number of bytes to transfer + * @num_xfered: Number of transferred bytes + * @tx_sgl: TX transfer scatterlist + * @rx_sgl: RX transfer scatterlist + * @tx_sgl_len: Size of TX DMA transfer + * @rx_sgl_len: Size of RX DMA transfer + * @dev_comp: Device data structure + * @spi_clk_hz: Current SPI clock in Hz + * @spimem_done: SPI-MEM operation completion + * @use_spimem: Enables SPI-MEM + * @dev: Device pointer + * @tx_dma: DMA start for SPI-MEM TX + * @rx_dma: DMA start for SPI-MEM RX + */ struct mtk_spi { void __iomem *base; u32 state; int pad_num; u32 *pad_sel; - struct clk *parent_clk, *sel_clk, *spi_clk; + struct clk *parent_clk, *sel_clk, *spi_clk, *spi_hclk; struct spi_transfer *cur_transfer; u32 xfer_len; u32 num_xfered; @@ -123,6 +166,11 @@ struct mtk_spi { u32 tx_sgl_len, rx_sgl_len; const struct mtk_spi_compatible *dev_comp; u32 spi_clk_hz; + struct completion spimem_done; + bool use_spimem; + struct device *dev; + dma_addr_t tx_dma; + dma_addr_t rx_dma; }; static const struct mtk_spi_compatible mtk_common_compat; @@ -704,6 +752,12 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id) else mdata->state = MTK_SPI_IDLE; + /* SPI-MEM ops */ + if (mdata->use_spimem) { + complete(&mdata->spimem_done); + return IRQ_HANDLED; + } + if (!master->can_dma(master, NULL, trans)) { if (trans->rx_buf) { cnt = mdata->xfer_len / 4; @@ -787,21 +841,287 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static int mtk_spi_mem_adjust_op_size(struct spi_mem *mem, + struct spi_mem_op *op) +{ + int opcode_len; + + if (op->data.dir != SPI_MEM_NO_DATA) { + opcode_len = 1 + op->addr.nbytes + op->dummy.nbytes; + if (opcode_len + op->data.nbytes > MTK_SPI_IPM_PACKET_SIZE) { + op->data.nbytes = MTK_SPI_IPM_PACKET_SIZE - opcode_len; + /* force data buffer dma-aligned. */ + op->data.nbytes -= op->data.nbytes % 4; + } + } + + return 0; +} + +static bool mtk_spi_mem_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + if (!spi_mem_default_supports_op(mem, op)) + return false; + + if (op->addr.nbytes && op->dummy.nbytes && + op->addr.buswidth != op->dummy.buswidth) + return false; + + if (op->addr.nbytes + op->dummy.nbytes > 16) + return false; + + if (op->data.nbytes > MTK_SPI_IPM_PACKET_SIZE) { + if (op->data.nbytes / MTK_SPI_IPM_PACKET_SIZE > + MTK_SPI_IPM_PACKET_LOOP || + op->data.nbytes % MTK_SPI_IPM_PACKET_SIZE != 0) + return false; + } + + return true; +} + +static void mtk_spi_mem_setup_dma_xfer(struct spi_master *master, + const struct spi_mem_op *op) +{ + struct mtk_spi *mdata = spi_master_get_devdata(master); + + writel((u32)(mdata->tx_dma & MTK_SPI_32BITS_MASK), + mdata->base + SPI_TX_SRC_REG); +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT + if (mdata->dev_comp->dma_ext) + writel((u32)(mdata->tx_dma >> 32), + mdata->base + SPI_TX_SRC_REG_64); +#endif + + if (op->data.dir == SPI_MEM_DATA_IN) { + writel((u32)(mdata->rx_dma & MTK_SPI_32BITS_MASK), + mdata->base + SPI_RX_DST_REG); +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT + if (mdata->dev_comp->dma_ext) + writel((u32)(mdata->rx_dma >> 32), + mdata->base + SPI_RX_DST_REG_64); +#endif + } +} + +static int mtk_spi_transfer_wait(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + struct mtk_spi *mdata = spi_master_get_devdata(mem->spi->master); + /* + * For each byte we wait for 8 cycles of the SPI clock. + * Since speed is defined in Hz and we want milliseconds, + * so it should be 8 * 1000. + */ + u64 ms = 8000LL; + + if (op->data.dir == SPI_MEM_NO_DATA) + ms *= 32; /* prevent we may get 0 for short transfers. */ + else + ms *= op->data.nbytes; + ms = div_u64(ms, mem->spi->max_speed_hz); + ms += ms + 1000; /* 1s tolerance */ + + if (ms > UINT_MAX) + ms = UINT_MAX; + + if (!wait_for_completion_timeout(&mdata->spimem_done, + msecs_to_jiffies(ms))) { + dev_err(mdata->dev, "spi-mem transfer timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int mtk_spi_mem_exec_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + struct mtk_spi *mdata = spi_master_get_devdata(mem->spi->master); + u32 reg_val, nio, tx_size; + char *tx_tmp_buf, *rx_tmp_buf; + int ret = 0; + + mdata->use_spimem = true; + reinit_completion(&mdata->spimem_done); + + mtk_spi_reset(mdata); + mtk_spi_hw_init(mem->spi->master, mem->spi); + mtk_spi_prepare_transfer(mem->spi->master, mem->spi->max_speed_hz); + + reg_val = readl(mdata->base + SPI_CFG3_IPM_REG); + /* opcode byte len */ + reg_val &= ~SPI_CFG3_IPM_CMD_BYTELEN_MASK; + reg_val |= 1 << SPI_CFG3_IPM_CMD_BYTELEN_OFFSET; + + /* addr & dummy byte len */ + reg_val &= ~SPI_CFG3_IPM_ADDR_BYTELEN_MASK; + if (op->addr.nbytes || op->dummy.nbytes) + reg_val |= (op->addr.nbytes + op->dummy.nbytes) << + SPI_CFG3_IPM_ADDR_BYTELEN_OFFSET; + + /* data byte len */ + if (op->data.dir == SPI_MEM_NO_DATA) { + reg_val |= SPI_CFG3_IPM_NODATA_FLAG; + writel(0, mdata->base + SPI_CFG1_REG); + } else { + reg_val &= ~SPI_CFG3_IPM_NODATA_FLAG; + mdata->xfer_len = op->data.nbytes; + mtk_spi_setup_packet(mem->spi->master); + } + + if (op->addr.nbytes || op->dummy.nbytes) { + if (op->addr.buswidth == 1 || op->dummy.buswidth == 1) + reg_val |= SPI_CFG3_IPM_XMODE_EN; + else + reg_val &= ~SPI_CFG3_IPM_XMODE_EN; + } + + if (op->addr.buswidth == 2 || + op->dummy.buswidth == 2 || + op->data.buswidth == 2) + nio = 2; + else if (op->addr.buswidth == 4 || + op->dummy.buswidth == 4 || + op->data.buswidth == 4) + nio = 4; + else + nio = 1; + + reg_val &= ~SPI_CFG3_IPM_CMD_PIN_MODE_MASK; + reg_val |= PIN_MODE_CFG(nio); + + reg_val |= SPI_CFG3_IPM_HALF_DUPLEX_EN; + if (op->data.dir == SPI_MEM_DATA_IN) + reg_val |= SPI_CFG3_IPM_HALF_DUPLEX_DIR; + else + reg_val &= ~SPI_CFG3_IPM_HALF_DUPLEX_DIR; + writel(reg_val, mdata->base + SPI_CFG3_IPM_REG); + + tx_size = 1 + op->addr.nbytes + op->dummy.nbytes; + if (op->data.dir == SPI_MEM_DATA_OUT) + tx_size += op->data.nbytes; + + tx_size = max_t(u32, tx_size, 32); + + tx_tmp_buf = kzalloc(tx_size, GFP_KERNEL | GFP_DMA); + if (!tx_tmp_buf) { + mdata->use_spimem = false; + return -ENOMEM; + } + + tx_tmp_buf[0] = op->cmd.opcode; + + if (op->addr.nbytes) { + int i; + + for (i = 0; i < op->addr.nbytes; i++) + tx_tmp_buf[i + 1] = op->addr.val >> + (8 * (op->addr.nbytes - i - 1)); + } + + if (op->dummy.nbytes) + memset(tx_tmp_buf + op->addr.nbytes + 1, + 0xff, + op->dummy.nbytes); + + if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT) + memcpy(tx_tmp_buf + op->dummy.nbytes + op->addr.nbytes + 1, + op->data.buf.out, + op->data.nbytes); + + mdata->tx_dma = dma_map_single(mdata->dev, tx_tmp_buf, + tx_size, DMA_TO_DEVICE); + if (dma_mapping_error(mdata->dev, mdata->tx_dma)) { + ret = -ENOMEM; + goto err_exit; + } + + if (op->data.dir == SPI_MEM_DATA_IN) { + if (!IS_ALIGNED((size_t)op->data.buf.in, 4)) { + rx_tmp_buf = kzalloc(op->data.nbytes, + GFP_KERNEL | GFP_DMA); + if (!rx_tmp_buf) { + ret = -ENOMEM; + goto unmap_tx_dma; + } + } else { + rx_tmp_buf = op->data.buf.in; + } + + mdata->rx_dma = dma_map_single(mdata->dev, + rx_tmp_buf, + op->data.nbytes, + DMA_FROM_DEVICE); + if (dma_mapping_error(mdata->dev, mdata->rx_dma)) { + ret = -ENOMEM; + goto kfree_rx_tmp_buf; + } + } + + reg_val = readl(mdata->base + SPI_CMD_REG); + reg_val |= SPI_CMD_TX_DMA; + if (op->data.dir == SPI_MEM_DATA_IN) + reg_val |= SPI_CMD_RX_DMA; + writel(reg_val, mdata->base + SPI_CMD_REG); + + mtk_spi_mem_setup_dma_xfer(mem->spi->master, op); + + mtk_spi_enable_transfer(mem->spi->master); + + /* Wait for the interrupt. */ + ret = mtk_spi_transfer_wait(mem, op); + if (ret) + goto unmap_rx_dma; + + /* spi disable dma */ + reg_val = readl(mdata->base + SPI_CMD_REG); + reg_val &= ~SPI_CMD_TX_DMA; + if (op->data.dir == SPI_MEM_DATA_IN) + reg_val &= ~SPI_CMD_RX_DMA; + writel(reg_val, mdata->base + SPI_CMD_REG); + +unmap_rx_dma: + if (op->data.dir == SPI_MEM_DATA_IN) { + dma_unmap_single(mdata->dev, mdata->rx_dma, + op->data.nbytes, DMA_FROM_DEVICE); + if (!IS_ALIGNED((size_t)op->data.buf.in, 4)) + memcpy(op->data.buf.in, rx_tmp_buf, op->data.nbytes); + } +kfree_rx_tmp_buf: + if (op->data.dir == SPI_MEM_DATA_IN && + !IS_ALIGNED((size_t)op->data.buf.in, 4)) + kfree(rx_tmp_buf); +unmap_tx_dma: + dma_unmap_single(mdata->dev, mdata->tx_dma, + tx_size, DMA_TO_DEVICE); +err_exit: + kfree(tx_tmp_buf); + mdata->use_spimem = false; + + return ret; +} + +static const struct spi_controller_mem_ops mtk_spi_mem_ops = { + .adjust_op_size = mtk_spi_mem_adjust_op_size, + .supports_op = mtk_spi_mem_supports_op, + .exec_op = mtk_spi_mem_exec_op, +}; + static int mtk_spi_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct spi_master *master; struct mtk_spi *mdata; - const struct of_device_id *of_id; int i, irq, ret, addr_bits; - master = spi_alloc_master(&pdev->dev, sizeof(*mdata)); - if (!master) { - dev_err(&pdev->dev, "failed to alloc spi master\n"); - return -ENOMEM; - } + master = devm_spi_alloc_master(dev, sizeof(*mdata)); + if (!master) + return dev_err_probe(dev, -ENOMEM, "failed to alloc spi master\n"); master->auto_runtime_pm = true; - master->dev.of_node = pdev->dev.of_node; + master->dev.of_node = dev->of_node; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; master->set_cs = mtk_spi_set_cs; @@ -812,15 +1132,8 @@ static int mtk_spi_probe(struct platform_device *pdev) master->set_cs_timing = mtk_spi_set_hw_cs_timing; master->use_gpio_descriptors = true; - of_id = of_match_node(mtk_spi_of_match, pdev->dev.of_node); - if (!of_id) { - dev_err(&pdev->dev, "failed to probe of_node\n"); - ret = -EINVAL; - goto err_put_master; - } - mdata = spi_master_get_devdata(master); - mdata->dev_comp = of_id->data; + mdata->dev_comp = device_get_match_data(dev); if (mdata->dev_comp->enhance_timing) master->mode_bits |= SPI_CS_HIGH; @@ -830,143 +1143,122 @@ static int mtk_spi_probe(struct platform_device *pdev) if (mdata->dev_comp->ipm_design) master->mode_bits |= SPI_LOOP; + if (mdata->dev_comp->ipm_design) { + mdata->dev = dev; + master->mem_ops = &mtk_spi_mem_ops; + init_completion(&mdata->spimem_done); + } + if (mdata->dev_comp->need_pad_sel) { - mdata->pad_num = of_property_count_u32_elems( - pdev->dev.of_node, + mdata->pad_num = of_property_count_u32_elems(dev->of_node, "mediatek,pad-select"); - if (mdata->pad_num < 0) { - dev_err(&pdev->dev, + if (mdata->pad_num < 0) + return dev_err_probe(dev, -EINVAL, "No 'mediatek,pad-select' property\n"); - ret = -EINVAL; - goto err_put_master; - } - mdata->pad_sel = devm_kmalloc_array(&pdev->dev, mdata->pad_num, + mdata->pad_sel = devm_kmalloc_array(dev, mdata->pad_num, sizeof(u32), GFP_KERNEL); - if (!mdata->pad_sel) { - ret = -ENOMEM; - goto err_put_master; - } + if (!mdata->pad_sel) + return -ENOMEM; for (i = 0; i < mdata->pad_num; i++) { - of_property_read_u32_index(pdev->dev.of_node, + of_property_read_u32_index(dev->of_node, "mediatek,pad-select", i, &mdata->pad_sel[i]); - if (mdata->pad_sel[i] > MT8173_SPI_MAX_PAD_SEL) { - dev_err(&pdev->dev, "wrong pad-sel[%d]: %u\n", - i, mdata->pad_sel[i]); - ret = -EINVAL; - goto err_put_master; - } + if (mdata->pad_sel[i] > MT8173_SPI_MAX_PAD_SEL) + return dev_err_probe(dev, -EINVAL, + "wrong pad-sel[%d]: %u\n", + i, mdata->pad_sel[i]); } } platform_set_drvdata(pdev, master); mdata->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(mdata->base)) { - ret = PTR_ERR(mdata->base); - goto err_put_master; - } + if (IS_ERR(mdata->base)) + return PTR_ERR(mdata->base); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto err_put_master; - } + if (irq < 0) + return irq; - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + if (!dev->dma_mask) + dev->dma_mask = &dev->coherent_dma_mask; - ret = devm_request_irq(&pdev->dev, irq, mtk_spi_interrupt, - IRQF_TRIGGER_NONE, dev_name(&pdev->dev), master); - if (ret) { - dev_err(&pdev->dev, "failed to register irq (%d)\n", ret); - goto err_put_master; - } + ret = devm_request_irq(dev, irq, mtk_spi_interrupt, + IRQF_TRIGGER_NONE, dev_name(dev), master); + if (ret) + return dev_err_probe(dev, ret, "failed to register irq\n"); - mdata->parent_clk = devm_clk_get(&pdev->dev, "parent-clk"); - if (IS_ERR(mdata->parent_clk)) { - ret = PTR_ERR(mdata->parent_clk); - dev_err(&pdev->dev, "failed to get parent-clk: %d\n", ret); - goto err_put_master; - } + mdata->parent_clk = devm_clk_get(dev, "parent-clk"); + if (IS_ERR(mdata->parent_clk)) + return dev_err_probe(dev, PTR_ERR(mdata->parent_clk), + "failed to get parent-clk\n"); - mdata->sel_clk = devm_clk_get(&pdev->dev, "sel-clk"); - if (IS_ERR(mdata->sel_clk)) { - ret = PTR_ERR(mdata->sel_clk); - dev_err(&pdev->dev, "failed to get sel-clk: %d\n", ret); - goto err_put_master; - } + mdata->sel_clk = devm_clk_get(dev, "sel-clk"); + if (IS_ERR(mdata->sel_clk)) + return dev_err_probe(dev, PTR_ERR(mdata->sel_clk), "failed to get sel-clk\n"); - mdata->spi_clk = devm_clk_get(&pdev->dev, "spi-clk"); - if (IS_ERR(mdata->spi_clk)) { - ret = PTR_ERR(mdata->spi_clk); - dev_err(&pdev->dev, "failed to get spi-clk: %d\n", ret); - goto err_put_master; - } + mdata->spi_clk = devm_clk_get(dev, "spi-clk"); + if (IS_ERR(mdata->spi_clk)) + return dev_err_probe(dev, PTR_ERR(mdata->spi_clk), "failed to get spi-clk\n"); - ret = clk_prepare_enable(mdata->spi_clk); - if (ret < 0) { - dev_err(&pdev->dev, "failed to enable spi_clk (%d)\n", ret); - goto err_put_master; - } + mdata->spi_hclk = devm_clk_get_optional(dev, "hclk"); + if (IS_ERR(mdata->spi_hclk)) + return dev_err_probe(dev, PTR_ERR(mdata->spi_hclk), "failed to get hclk\n"); ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to clk_set_parent\n"); + + ret = clk_prepare_enable(mdata->spi_hclk); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to enable hclk\n"); + + ret = clk_prepare_enable(mdata->spi_clk); if (ret < 0) { - dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret); - clk_disable_unprepare(mdata->spi_clk); - goto err_put_master; + clk_disable_unprepare(mdata->spi_hclk); + return dev_err_probe(dev, ret, "failed to enable spi_clk\n"); } mdata->spi_clk_hz = clk_get_rate(mdata->spi_clk); - if (mdata->dev_comp->no_need_unprepare) + if (mdata->dev_comp->no_need_unprepare) { clk_disable(mdata->spi_clk); - else + clk_disable(mdata->spi_hclk); + } else { clk_disable_unprepare(mdata->spi_clk); - - pm_runtime_enable(&pdev->dev); + clk_disable_unprepare(mdata->spi_hclk); + } if (mdata->dev_comp->need_pad_sel) { - if (mdata->pad_num != master->num_chipselect) { - dev_err(&pdev->dev, + if (mdata->pad_num != master->num_chipselect) + return dev_err_probe(dev, -EINVAL, "pad_num does not match num_chipselect(%d != %d)\n", mdata->pad_num, master->num_chipselect); - ret = -EINVAL; - goto err_disable_runtime_pm; - } - if (!master->cs_gpiods && master->num_chipselect > 1) { - dev_err(&pdev->dev, + if (!master->cs_gpiods && master->num_chipselect > 1) + return dev_err_probe(dev, -EINVAL, "cs_gpios not specified and num_chipselect > 1\n"); - ret = -EINVAL; - goto err_disable_runtime_pm; - } } if (mdata->dev_comp->dma_ext) addr_bits = DMA_ADDR_EXT_BITS; else addr_bits = DMA_ADDR_DEF_BITS; - ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(addr_bits)); + ret = dma_set_mask(dev, DMA_BIT_MASK(addr_bits)); if (ret) - dev_notice(&pdev->dev, "SPI dma_set_mask(%d) failed, ret:%d\n", + dev_notice(dev, "SPI dma_set_mask(%d) failed, ret:%d\n", addr_bits, ret); - ret = devm_spi_register_master(&pdev->dev, master); + pm_runtime_enable(dev); + + ret = devm_spi_register_master(dev, master); if (ret) { - dev_err(&pdev->dev, "failed to register master (%d)\n", ret); - goto err_disable_runtime_pm; + pm_runtime_disable(dev); + return dev_err_probe(dev, ret, "failed to register master\n"); } return 0; - -err_disable_runtime_pm: - pm_runtime_disable(&pdev->dev); -err_put_master: - spi_master_put(master); - - return ret; } static int mtk_spi_remove(struct platform_device *pdev) @@ -978,8 +1270,10 @@ static int mtk_spi_remove(struct platform_device *pdev) mtk_spi_reset(mdata); - if (mdata->dev_comp->no_need_unprepare) + if (mdata->dev_comp->no_need_unprepare) { clk_unprepare(mdata->spi_clk); + clk_unprepare(mdata->spi_hclk); + } return 0; } @@ -995,8 +1289,10 @@ static int mtk_spi_suspend(struct device *dev) if (ret) return ret; - if (!pm_runtime_suspended(dev)) + if (!pm_runtime_suspended(dev)) { clk_disable_unprepare(mdata->spi_clk); + clk_disable_unprepare(mdata->spi_hclk); + } return ret; } @@ -1013,11 +1309,20 @@ static int mtk_spi_resume(struct device *dev) dev_err(dev, "failed to enable spi_clk (%d)\n", ret); return ret; } + + ret = clk_prepare_enable(mdata->spi_hclk); + if (ret < 0) { + dev_err(dev, "failed to enable spi_hclk (%d)\n", ret); + clk_disable_unprepare(mdata->spi_clk); + return ret; + } } ret = spi_master_resume(master); - if (ret < 0) + if (ret < 0) { clk_disable_unprepare(mdata->spi_clk); + clk_disable_unprepare(mdata->spi_hclk); + } return ret; } @@ -1029,10 +1334,13 @@ static int mtk_spi_runtime_suspend(struct device *dev) struct spi_master *master = dev_get_drvdata(dev); struct mtk_spi *mdata = spi_master_get_devdata(master); - if (mdata->dev_comp->no_need_unprepare) + if (mdata->dev_comp->no_need_unprepare) { clk_disable(mdata->spi_clk); - else + clk_disable(mdata->spi_hclk); + } else { clk_disable_unprepare(mdata->spi_clk); + clk_disable_unprepare(mdata->spi_hclk); + } return 0; } @@ -1043,13 +1351,31 @@ static int mtk_spi_runtime_resume(struct device *dev) struct mtk_spi *mdata = spi_master_get_devdata(master); int ret; - if (mdata->dev_comp->no_need_unprepare) + if (mdata->dev_comp->no_need_unprepare) { ret = clk_enable(mdata->spi_clk); - else + if (ret < 0) { + dev_err(dev, "failed to enable spi_clk (%d)\n", ret); + return ret; + } + ret = clk_enable(mdata->spi_hclk); + if (ret < 0) { + dev_err(dev, "failed to enable spi_hclk (%d)\n", ret); + clk_disable(mdata->spi_clk); + return ret; + } + } else { ret = clk_prepare_enable(mdata->spi_clk); - if (ret < 0) { - dev_err(dev, "failed to enable spi_clk (%d)\n", ret); - return ret; + if (ret < 0) { + dev_err(dev, "failed to prepare_enable spi_clk (%d)\n", ret); + return ret; + } + + ret = clk_prepare_enable(mdata->spi_hclk); + if (ret < 0) { + dev_err(dev, "failed to prepare_enable spi_hclk (%d)\n", ret); + clk_disable_unprepare(mdata->spi_clk); + return ret; + } } return 0; diff --git a/drivers/spi/spi-mtk-snfi.c b/drivers/spi/spi-mtk-snfi.c new file mode 100644 index 000000000000..d66bf9762557 --- /dev/null +++ b/drivers/spi/spi-mtk-snfi.c @@ -0,0 +1,1472 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Driver for the SPI-NAND mode of Mediatek NAND Flash Interface +// +// Copyright (c) 2022 Chuanhong Guo <gch981213@gmail.com> +// +// This driver is based on the SPI-NAND mtd driver from Mediatek SDK: +// +// Copyright (C) 2020 MediaTek Inc. +// Author: Weijie Gao <weijie.gao@mediatek.com> +// +// This controller organize the page data as several interleaved sectors +// like the following: (sizeof(FDM + ECC) = snf->nfi_cfg.spare_size) +// +---------+------+------+---------+------+------+-----+ +// | Sector1 | FDM1 | ECC1 | Sector2 | FDM2 | ECC2 | ... | +// +---------+------+------+---------+------+------+-----+ +// With auto-format turned on, DMA only returns this part: +// +---------+---------+-----+ +// | Sector1 | Sector2 | ... | +// +---------+---------+-----+ +// The FDM data will be filled to the registers, and ECC parity data isn't +// accessible. +// With auto-format off, all ((Sector+FDM+ECC)*nsectors) will be read over DMA +// in it's original order shown in the first table. ECC can't be turned on when +// auto-format is off. +// +// However, Linux SPI-NAND driver expects the data returned as: +// +------+-----+ +// | Page | OOB | +// +------+-----+ +// where the page data is continuously stored instead of interleaved. +// So we assume all instructions matching the page_op template between ECC +// prepare_io_req and finish_io_req are for page cache r/w. +// Here's how this spi-mem driver operates when reading: +// 1. Always set snf->autofmt = true in prepare_io_req (even when ECC is off). +// 2. Perform page ops and let the controller fill the DMA bounce buffer with +// de-interleaved sector data and set FDM registers. +// 3. Return the data as: +// +---------+---------+-----+------+------+-----+ +// | Sector1 | Sector2 | ... | FDM1 | FDM2 | ... | +// +---------+---------+-----+------+------+-----+ +// 4. For other matching spi_mem ops outside a prepare/finish_io_req pair, +// read the data with auto-format off into the bounce buffer and copy +// needed data to the buffer specified in the request. +// +// Write requests operates in a similar manner. +// As a limitation of this strategy, we won't be able to access any ECC parity +// data at all in Linux. +// +// Here's the bad block mark situation on MTK chips: +// In older chips like mt7622, MTK uses the first FDM byte in the first sector +// as the bad block mark. After de-interleaving, this byte appears at [pagesize] +// in the returned data, which is the BBM position expected by kernel. However, +// the conventional bad block mark is the first byte of the OOB, which is part +// of the last sector data in the interleaved layout. Instead of fixing their +// hardware, MTK decided to address this inconsistency in software. On these +// later chips, the BootROM expects the following: +// 1. The [pagesize] byte on a nand page is used as BBM, which will appear at +// (page_size - (nsectors - 1) * spare_size) in the DMA buffer. +// 2. The original byte stored at that position in the DMA buffer will be stored +// as the first byte of the FDM section in the last sector. +// We can't disagree with the BootROM, so after de-interleaving, we need to +// perform the following swaps in read: +// 1. Store the BBM at [page_size - (nsectors - 1) * spare_size] to [page_size], +// which is the expected BBM position by kernel. +// 2. Store the page data byte at [pagesize + (nsectors-1) * fdm] back to +// [page_size - (nsectors - 1) * spare_size] +// Similarly, when writing, we need to perform swaps in the other direction. + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/iopoll.h> +#include <linux/of_platform.h> +#include <linux/mtd/nand-ecc-mtk.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> +#include <linux/mtd/nand.h> + +// NFI registers +#define NFI_CNFG 0x000 +#define CNFG_OP_MODE_S 12 +#define CNFG_OP_MODE_CUST 6 +#define CNFG_OP_MODE_PROGRAM 3 +#define CNFG_AUTO_FMT_EN BIT(9) +#define CNFG_HW_ECC_EN BIT(8) +#define CNFG_DMA_BURST_EN BIT(2) +#define CNFG_READ_MODE BIT(1) +#define CNFG_DMA_MODE BIT(0) + +#define NFI_PAGEFMT 0x0004 +#define NFI_SPARE_SIZE_LS_S 16 +#define NFI_FDM_ECC_NUM_S 12 +#define NFI_FDM_NUM_S 8 +#define NFI_SPARE_SIZE_S 4 +#define NFI_SEC_SEL_512 BIT(2) +#define NFI_PAGE_SIZE_S 0 +#define NFI_PAGE_SIZE_512_2K 0 +#define NFI_PAGE_SIZE_2K_4K 1 +#define NFI_PAGE_SIZE_4K_8K 2 +#define NFI_PAGE_SIZE_8K_16K 3 + +#define NFI_CON 0x008 +#define CON_SEC_NUM_S 12 +#define CON_BWR BIT(9) +#define CON_BRD BIT(8) +#define CON_NFI_RST BIT(1) +#define CON_FIFO_FLUSH BIT(0) + +#define NFI_INTR_EN 0x010 +#define NFI_INTR_STA 0x014 +#define NFI_IRQ_INTR_EN BIT(31) +#define NFI_IRQ_CUS_READ BIT(8) +#define NFI_IRQ_CUS_PG BIT(7) + +#define NFI_CMD 0x020 +#define NFI_CMD_DUMMY_READ 0x00 +#define NFI_CMD_DUMMY_WRITE 0x80 + +#define NFI_STRDATA 0x040 +#define STR_DATA BIT(0) + +#define NFI_STA 0x060 +#define NFI_NAND_FSM GENMASK(28, 24) +#define NFI_FSM GENMASK(19, 16) +#define READ_EMPTY BIT(12) + +#define NFI_FIFOSTA 0x064 +#define FIFO_WR_REMAIN_S 8 +#define FIFO_RD_REMAIN_S 0 + +#define NFI_ADDRCNTR 0x070 +#define SEC_CNTR GENMASK(16, 12) +#define SEC_CNTR_S 12 +#define NFI_SEC_CNTR(val) (((val)&SEC_CNTR) >> SEC_CNTR_S) + +#define NFI_STRADDR 0x080 + +#define NFI_BYTELEN 0x084 +#define BUS_SEC_CNTR(val) (((val)&SEC_CNTR) >> SEC_CNTR_S) + +#define NFI_FDM0L 0x0a0 +#define NFI_FDM0M 0x0a4 +#define NFI_FDML(n) (NFI_FDM0L + (n)*8) +#define NFI_FDMM(n) (NFI_FDM0M + (n)*8) + +#define NFI_DEBUG_CON1 0x220 +#define WBUF_EN BIT(2) + +#define NFI_MASTERSTA 0x224 +#define MAS_ADDR GENMASK(11, 9) +#define MAS_RD GENMASK(8, 6) +#define MAS_WR GENMASK(5, 3) +#define MAS_RDDLY GENMASK(2, 0) +#define NFI_MASTERSTA_MASK_7622 (MAS_ADDR | MAS_RD | MAS_WR | MAS_RDDLY) + +// SNFI registers +#define SNF_MAC_CTL 0x500 +#define MAC_XIO_SEL BIT(4) +#define SF_MAC_EN BIT(3) +#define SF_TRIG BIT(2) +#define WIP_READY BIT(1) +#define WIP BIT(0) + +#define SNF_MAC_OUTL 0x504 +#define SNF_MAC_INL 0x508 + +#define SNF_RD_CTL2 0x510 +#define DATA_READ_DUMMY_S 8 +#define DATA_READ_MAX_DUMMY 0xf +#define DATA_READ_CMD_S 0 + +#define SNF_RD_CTL3 0x514 + +#define SNF_PG_CTL1 0x524 +#define PG_LOAD_CMD_S 8 + +#define SNF_PG_CTL2 0x528 + +#define SNF_MISC_CTL 0x538 +#define SW_RST BIT(28) +#define FIFO_RD_LTC_S 25 +#define PG_LOAD_X4_EN BIT(20) +#define DATA_READ_MODE_S 16 +#define DATA_READ_MODE GENMASK(18, 16) +#define DATA_READ_MODE_X1 0 +#define DATA_READ_MODE_X2 1 +#define DATA_READ_MODE_X4 2 +#define DATA_READ_MODE_DUAL 5 +#define DATA_READ_MODE_QUAD 6 +#define PG_LOAD_CUSTOM_EN BIT(7) +#define DATARD_CUSTOM_EN BIT(6) +#define CS_DESELECT_CYC_S 0 + +#define SNF_MISC_CTL2 0x53c +#define PROGRAM_LOAD_BYTE_NUM_S 16 +#define READ_DATA_BYTE_NUM_S 11 + +#define SNF_DLY_CTL3 0x548 +#define SFCK_SAM_DLY_S 0 + +#define SNF_STA_CTL1 0x550 +#define CUS_PG_DONE BIT(28) +#define CUS_READ_DONE BIT(27) +#define SPI_STATE_S 0 +#define SPI_STATE GENMASK(3, 0) + +#define SNF_CFG 0x55c +#define SPI_MODE BIT(0) + +#define SNF_GPRAM 0x800 +#define SNF_GPRAM_SIZE 0xa0 + +#define SNFI_POLL_INTERVAL 1000000 + +static const u8 mt7622_spare_sizes[] = { 16, 26, 27, 28 }; + +struct mtk_snand_caps { + u16 sector_size; + u16 max_sectors; + u16 fdm_size; + u16 fdm_ecc_size; + u16 fifo_size; + + bool bbm_swap; + bool empty_page_check; + u32 mastersta_mask; + + const u8 *spare_sizes; + u32 num_spare_size; +}; + +static const struct mtk_snand_caps mt7622_snand_caps = { + .sector_size = 512, + .max_sectors = 8, + .fdm_size = 8, + .fdm_ecc_size = 1, + .fifo_size = 32, + .bbm_swap = false, + .empty_page_check = false, + .mastersta_mask = NFI_MASTERSTA_MASK_7622, + .spare_sizes = mt7622_spare_sizes, + .num_spare_size = ARRAY_SIZE(mt7622_spare_sizes) +}; + +static const struct mtk_snand_caps mt7629_snand_caps = { + .sector_size = 512, + .max_sectors = 8, + .fdm_size = 8, + .fdm_ecc_size = 1, + .fifo_size = 32, + .bbm_swap = true, + .empty_page_check = false, + .mastersta_mask = NFI_MASTERSTA_MASK_7622, + .spare_sizes = mt7622_spare_sizes, + .num_spare_size = ARRAY_SIZE(mt7622_spare_sizes) +}; + +struct mtk_snand_conf { + size_t page_size; + size_t oob_size; + u8 nsectors; + u8 spare_size; +}; + +struct mtk_snand { + struct spi_controller *ctlr; + struct device *dev; + struct clk *nfi_clk; + struct clk *pad_clk; + void __iomem *nfi_base; + int irq; + struct completion op_done; + const struct mtk_snand_caps *caps; + struct mtk_ecc_config *ecc_cfg; + struct mtk_ecc *ecc; + struct mtk_snand_conf nfi_cfg; + struct mtk_ecc_stats ecc_stats; + struct nand_ecc_engine ecc_eng; + bool autofmt; + u8 *buf; + size_t buf_len; +}; + +static struct mtk_snand *nand_to_mtk_snand(struct nand_device *nand) +{ + struct nand_ecc_engine *eng = nand->ecc.engine; + + return container_of(eng, struct mtk_snand, ecc_eng); +} + +static inline int snand_prepare_bouncebuf(struct mtk_snand *snf, size_t size) +{ + if (snf->buf_len >= size) + return 0; + kfree(snf->buf); + snf->buf = kmalloc(size, GFP_KERNEL); + if (!snf->buf) + return -ENOMEM; + snf->buf_len = size; + memset(snf->buf, 0xff, snf->buf_len); + return 0; +} + +static inline u32 nfi_read32(struct mtk_snand *snf, u32 reg) +{ + return readl(snf->nfi_base + reg); +} + +static inline void nfi_write32(struct mtk_snand *snf, u32 reg, u32 val) +{ + writel(val, snf->nfi_base + reg); +} + +static inline void nfi_write16(struct mtk_snand *snf, u32 reg, u16 val) +{ + writew(val, snf->nfi_base + reg); +} + +static inline void nfi_rmw32(struct mtk_snand *snf, u32 reg, u32 clr, u32 set) +{ + u32 val; + + val = readl(snf->nfi_base + reg); + val &= ~clr; + val |= set; + writel(val, snf->nfi_base + reg); +} + +static void nfi_read_data(struct mtk_snand *snf, u32 reg, u8 *data, u32 len) +{ + u32 i, val = 0, es = sizeof(u32); + + for (i = reg; i < reg + len; i++) { + if (i == reg || i % es == 0) + val = nfi_read32(snf, i & ~(es - 1)); + + *data++ = (u8)(val >> (8 * (i % es))); + } +} + +static int mtk_nfi_reset(struct mtk_snand *snf) +{ + u32 val, fifo_mask; + int ret; + + nfi_write32(snf, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST); + + ret = readw_poll_timeout(snf->nfi_base + NFI_MASTERSTA, val, + !(val & snf->caps->mastersta_mask), 0, + SNFI_POLL_INTERVAL); + if (ret) { + dev_err(snf->dev, "NFI master is still busy after reset\n"); + return ret; + } + + ret = readl_poll_timeout(snf->nfi_base + NFI_STA, val, + !(val & (NFI_FSM | NFI_NAND_FSM)), 0, + SNFI_POLL_INTERVAL); + if (ret) { + dev_err(snf->dev, "Failed to reset NFI\n"); + return ret; + } + + fifo_mask = ((snf->caps->fifo_size - 1) << FIFO_RD_REMAIN_S) | + ((snf->caps->fifo_size - 1) << FIFO_WR_REMAIN_S); + ret = readw_poll_timeout(snf->nfi_base + NFI_FIFOSTA, val, + !(val & fifo_mask), 0, SNFI_POLL_INTERVAL); + if (ret) { + dev_err(snf->dev, "NFI FIFOs are not empty\n"); + return ret; + } + + return 0; +} + +static int mtk_snand_mac_reset(struct mtk_snand *snf) +{ + int ret; + u32 val; + + nfi_rmw32(snf, SNF_MISC_CTL, 0, SW_RST); + + ret = readl_poll_timeout(snf->nfi_base + SNF_STA_CTL1, val, + !(val & SPI_STATE), 0, SNFI_POLL_INTERVAL); + if (ret) + dev_err(snf->dev, "Failed to reset SNFI MAC\n"); + + nfi_write32(snf, SNF_MISC_CTL, + (2 << FIFO_RD_LTC_S) | (10 << CS_DESELECT_CYC_S)); + + return ret; +} + +static int mtk_snand_mac_trigger(struct mtk_snand *snf, u32 outlen, u32 inlen) +{ + int ret; + u32 val; + + nfi_write32(snf, SNF_MAC_CTL, SF_MAC_EN); + nfi_write32(snf, SNF_MAC_OUTL, outlen); + nfi_write32(snf, SNF_MAC_INL, inlen); + + nfi_write32(snf, SNF_MAC_CTL, SF_MAC_EN | SF_TRIG); + + ret = readl_poll_timeout(snf->nfi_base + SNF_MAC_CTL, val, + val & WIP_READY, 0, SNFI_POLL_INTERVAL); + if (ret) { + dev_err(snf->dev, "Timed out waiting for WIP_READY\n"); + goto cleanup; + } + + ret = readl_poll_timeout(snf->nfi_base + SNF_MAC_CTL, val, !(val & WIP), + 0, SNFI_POLL_INTERVAL); + if (ret) + dev_err(snf->dev, "Timed out waiting for WIP cleared\n"); + +cleanup: + nfi_write32(snf, SNF_MAC_CTL, 0); + + return ret; +} + +static int mtk_snand_mac_io(struct mtk_snand *snf, const struct spi_mem_op *op) +{ + u32 rx_len = 0; + u32 reg_offs = 0; + u32 val = 0; + const u8 *tx_buf = NULL; + u8 *rx_buf = NULL; + int i, ret; + u8 b; + + if (op->data.dir == SPI_MEM_DATA_IN) { + rx_len = op->data.nbytes; + rx_buf = op->data.buf.in; + } else { + tx_buf = op->data.buf.out; + } + + mtk_snand_mac_reset(snf); + + for (i = 0; i < op->cmd.nbytes; i++, reg_offs++) { + b = (op->cmd.opcode >> ((op->cmd.nbytes - i - 1) * 8)) & 0xff; + val |= b << (8 * (reg_offs % 4)); + if (reg_offs % 4 == 3) { + nfi_write32(snf, SNF_GPRAM + reg_offs - 3, val); + val = 0; + } + } + + for (i = 0; i < op->addr.nbytes; i++, reg_offs++) { + b = (op->addr.val >> ((op->addr.nbytes - i - 1) * 8)) & 0xff; + val |= b << (8 * (reg_offs % 4)); + if (reg_offs % 4 == 3) { + nfi_write32(snf, SNF_GPRAM + reg_offs - 3, val); + val = 0; + } + } + + for (i = 0; i < op->dummy.nbytes; i++, reg_offs++) { + if (reg_offs % 4 == 3) { + nfi_write32(snf, SNF_GPRAM + reg_offs - 3, val); + val = 0; + } + } + + if (op->data.dir == SPI_MEM_DATA_OUT) { + for (i = 0; i < op->data.nbytes; i++, reg_offs++) { + val |= tx_buf[i] << (8 * (reg_offs % 4)); + if (reg_offs % 4 == 3) { + nfi_write32(snf, SNF_GPRAM + reg_offs - 3, val); + val = 0; + } + } + } + + if (reg_offs % 4) + nfi_write32(snf, SNF_GPRAM + (reg_offs & ~3), val); + + for (i = 0; i < reg_offs; i += 4) + dev_dbg(snf->dev, "%d: %08X", i, + nfi_read32(snf, SNF_GPRAM + i)); + + dev_dbg(snf->dev, "SNF TX: %u RX: %u", reg_offs, rx_len); + + ret = mtk_snand_mac_trigger(snf, reg_offs, rx_len); + if (ret) + return ret; + + if (!rx_len) + return 0; + + nfi_read_data(snf, SNF_GPRAM + reg_offs, rx_buf, rx_len); + return 0; +} + +static int mtk_snand_setup_pagefmt(struct mtk_snand *snf, u32 page_size, + u32 oob_size) +{ + int spare_idx = -1; + u32 spare_size, spare_size_shift, pagesize_idx; + u32 sector_size_512; + u8 nsectors; + int i; + + // skip if it's already configured as required. + if (snf->nfi_cfg.page_size == page_size && + snf->nfi_cfg.oob_size == oob_size) + return 0; + + nsectors = page_size / snf->caps->sector_size; + if (nsectors > snf->caps->max_sectors) { + dev_err(snf->dev, "too many sectors required.\n"); + goto err; + } + + if (snf->caps->sector_size == 512) { + sector_size_512 = NFI_SEC_SEL_512; + spare_size_shift = NFI_SPARE_SIZE_S; + } else { + sector_size_512 = 0; + spare_size_shift = NFI_SPARE_SIZE_LS_S; + } + + switch (page_size) { + case SZ_512: + pagesize_idx = NFI_PAGE_SIZE_512_2K; + break; + case SZ_2K: + if (snf->caps->sector_size == 512) + pagesize_idx = NFI_PAGE_SIZE_2K_4K; + else + pagesize_idx = NFI_PAGE_SIZE_512_2K; + break; + case SZ_4K: + if (snf->caps->sector_size == 512) + pagesize_idx = NFI_PAGE_SIZE_4K_8K; + else + pagesize_idx = NFI_PAGE_SIZE_2K_4K; + break; + case SZ_8K: + if (snf->caps->sector_size == 512) + pagesize_idx = NFI_PAGE_SIZE_8K_16K; + else + pagesize_idx = NFI_PAGE_SIZE_4K_8K; + break; + case SZ_16K: + pagesize_idx = NFI_PAGE_SIZE_8K_16K; + break; + default: + dev_err(snf->dev, "unsupported page size.\n"); + goto err; + } + + spare_size = oob_size / nsectors; + // If we're using the 1KB sector size, HW will automatically double the + // spare size. We should only use half of the value in this case. + if (snf->caps->sector_size == 1024) + spare_size /= 2; + + for (i = snf->caps->num_spare_size - 1; i >= 0; i--) { + if (snf->caps->spare_sizes[i] <= spare_size) { + spare_size = snf->caps->spare_sizes[i]; + if (snf->caps->sector_size == 1024) + spare_size *= 2; + spare_idx = i; + break; + } + } + + if (spare_idx < 0) { + dev_err(snf->dev, "unsupported spare size: %u\n", spare_size); + goto err; + } + + nfi_write32(snf, NFI_PAGEFMT, + (snf->caps->fdm_ecc_size << NFI_FDM_ECC_NUM_S) | + (snf->caps->fdm_size << NFI_FDM_NUM_S) | + (spare_idx << spare_size_shift) | + (pagesize_idx << NFI_PAGE_SIZE_S) | + sector_size_512); + + snf->nfi_cfg.page_size = page_size; + snf->nfi_cfg.oob_size = oob_size; + snf->nfi_cfg.nsectors = nsectors; + snf->nfi_cfg.spare_size = spare_size; + + dev_dbg(snf->dev, "page format: (%u + %u) * %u\n", + snf->caps->sector_size, spare_size, nsectors); + return snand_prepare_bouncebuf(snf, page_size + oob_size); +err: + dev_err(snf->dev, "page size %u + %u is not supported\n", page_size, + oob_size); + return -EOPNOTSUPP; +} + +static int mtk_snand_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobecc) +{ + // ECC area is not accessible + return -ERANGE; +} + +static int mtk_snand_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobfree) +{ + struct nand_device *nand = mtd_to_nanddev(mtd); + struct mtk_snand *ms = nand_to_mtk_snand(nand); + + if (section >= ms->nfi_cfg.nsectors) + return -ERANGE; + + oobfree->length = ms->caps->fdm_size - 1; + oobfree->offset = section * ms->caps->fdm_size + 1; + return 0; +} + +static const struct mtd_ooblayout_ops mtk_snand_ooblayout = { + .ecc = mtk_snand_ooblayout_ecc, + .free = mtk_snand_ooblayout_free, +}; + +static int mtk_snand_ecc_init_ctx(struct nand_device *nand) +{ + struct mtk_snand *snf = nand_to_mtk_snand(nand); + struct nand_ecc_props *conf = &nand->ecc.ctx.conf; + struct nand_ecc_props *reqs = &nand->ecc.requirements; + struct nand_ecc_props *user = &nand->ecc.user_conf; + struct mtd_info *mtd = nanddev_to_mtd(nand); + int step_size = 0, strength = 0, desired_correction = 0, steps; + bool ecc_user = false; + int ret; + u32 parity_bits, max_ecc_bytes; + struct mtk_ecc_config *ecc_cfg; + + ret = mtk_snand_setup_pagefmt(snf, nand->memorg.pagesize, + nand->memorg.oobsize); + if (ret) + return ret; + + ecc_cfg = kzalloc(sizeof(*ecc_cfg), GFP_KERNEL); + if (!ecc_cfg) + return -ENOMEM; + + nand->ecc.ctx.priv = ecc_cfg; + + if (user->step_size && user->strength) { + step_size = user->step_size; + strength = user->strength; + ecc_user = true; + } else if (reqs->step_size && reqs->strength) { + step_size = reqs->step_size; + strength = reqs->strength; + } + + if (step_size && strength) { + steps = mtd->writesize / step_size; + desired_correction = steps * strength; + strength = desired_correction / snf->nfi_cfg.nsectors; + } + + ecc_cfg->mode = ECC_NFI_MODE; + ecc_cfg->sectors = snf->nfi_cfg.nsectors; + ecc_cfg->len = snf->caps->sector_size + snf->caps->fdm_ecc_size; + + // calculate the max possible strength under current page format + parity_bits = mtk_ecc_get_parity_bits(snf->ecc); + max_ecc_bytes = snf->nfi_cfg.spare_size - snf->caps->fdm_size; + ecc_cfg->strength = max_ecc_bytes * 8 / parity_bits; + mtk_ecc_adjust_strength(snf->ecc, &ecc_cfg->strength); + + // if there's a user requested strength, find the minimum strength that + // meets the requirement. Otherwise use the maximum strength which is + // expected by BootROM. + if (ecc_user && strength) { + u32 s_next = ecc_cfg->strength - 1; + + while (1) { + mtk_ecc_adjust_strength(snf->ecc, &s_next); + if (s_next >= ecc_cfg->strength) + break; + if (s_next < strength) + break; + s_next = ecc_cfg->strength - 1; + } + } + + mtd_set_ooblayout(mtd, &mtk_snand_ooblayout); + + conf->step_size = snf->caps->sector_size; + conf->strength = ecc_cfg->strength; + + if (ecc_cfg->strength < strength) + dev_warn(snf->dev, "unable to fulfill ECC of %u bits.\n", + strength); + dev_info(snf->dev, "ECC strength: %u bits per %u bytes\n", + ecc_cfg->strength, snf->caps->sector_size); + + return 0; +} + +static void mtk_snand_ecc_cleanup_ctx(struct nand_device *nand) +{ + struct mtk_ecc_config *ecc_cfg = nand_to_ecc_ctx(nand); + + kfree(ecc_cfg); +} + +static int mtk_snand_ecc_prepare_io_req(struct nand_device *nand, + struct nand_page_io_req *req) +{ + struct mtk_snand *snf = nand_to_mtk_snand(nand); + struct mtk_ecc_config *ecc_cfg = nand_to_ecc_ctx(nand); + int ret; + + ret = mtk_snand_setup_pagefmt(snf, nand->memorg.pagesize, + nand->memorg.oobsize); + if (ret) + return ret; + snf->autofmt = true; + snf->ecc_cfg = ecc_cfg; + return 0; +} + +static int mtk_snand_ecc_finish_io_req(struct nand_device *nand, + struct nand_page_io_req *req) +{ + struct mtk_snand *snf = nand_to_mtk_snand(nand); + struct mtd_info *mtd = nanddev_to_mtd(nand); + + snf->ecc_cfg = NULL; + snf->autofmt = false; + if ((req->mode == MTD_OPS_RAW) || (req->type != NAND_PAGE_READ)) + return 0; + + if (snf->ecc_stats.failed) + mtd->ecc_stats.failed += snf->ecc_stats.failed; + mtd->ecc_stats.corrected += snf->ecc_stats.corrected; + return snf->ecc_stats.failed ? -EBADMSG : snf->ecc_stats.bitflips; +} + +static struct nand_ecc_engine_ops mtk_snfi_ecc_engine_ops = { + .init_ctx = mtk_snand_ecc_init_ctx, + .cleanup_ctx = mtk_snand_ecc_cleanup_ctx, + .prepare_io_req = mtk_snand_ecc_prepare_io_req, + .finish_io_req = mtk_snand_ecc_finish_io_req, +}; + +static void mtk_snand_read_fdm(struct mtk_snand *snf, u8 *buf) +{ + u32 vall, valm; + u8 *oobptr = buf; + int i, j; + + for (i = 0; i < snf->nfi_cfg.nsectors; i++) { + vall = nfi_read32(snf, NFI_FDML(i)); + valm = nfi_read32(snf, NFI_FDMM(i)); + + for (j = 0; j < snf->caps->fdm_size; j++) + oobptr[j] = (j >= 4 ? valm : vall) >> ((j % 4) * 8); + + oobptr += snf->caps->fdm_size; + } +} + +static void mtk_snand_write_fdm(struct mtk_snand *snf, const u8 *buf) +{ + u32 fdm_size = snf->caps->fdm_size; + const u8 *oobptr = buf; + u32 vall, valm; + int i, j; + + for (i = 0; i < snf->nfi_cfg.nsectors; i++) { + vall = 0; + valm = 0; + + for (j = 0; j < 8; j++) { + if (j < 4) + vall |= (j < fdm_size ? oobptr[j] : 0xff) + << (j * 8); + else + valm |= (j < fdm_size ? oobptr[j] : 0xff) + << ((j - 4) * 8); + } + + nfi_write32(snf, NFI_FDML(i), vall); + nfi_write32(snf, NFI_FDMM(i), valm); + + oobptr += fdm_size; + } +} + +static void mtk_snand_bm_swap(struct mtk_snand *snf, u8 *buf) +{ + u32 buf_bbm_pos, fdm_bbm_pos; + + if (!snf->caps->bbm_swap || snf->nfi_cfg.nsectors == 1) + return; + + // swap [pagesize] byte on nand with the first fdm byte + // in the last sector. + buf_bbm_pos = snf->nfi_cfg.page_size - + (snf->nfi_cfg.nsectors - 1) * snf->nfi_cfg.spare_size; + fdm_bbm_pos = snf->nfi_cfg.page_size + + (snf->nfi_cfg.nsectors - 1) * snf->caps->fdm_size; + + swap(snf->buf[fdm_bbm_pos], buf[buf_bbm_pos]); +} + +static void mtk_snand_fdm_bm_swap(struct mtk_snand *snf) +{ + u32 fdm_bbm_pos1, fdm_bbm_pos2; + + if (!snf->caps->bbm_swap || snf->nfi_cfg.nsectors == 1) + return; + + // swap the first fdm byte in the first and the last sector. + fdm_bbm_pos1 = snf->nfi_cfg.page_size; + fdm_bbm_pos2 = snf->nfi_cfg.page_size + + (snf->nfi_cfg.nsectors - 1) * snf->caps->fdm_size; + swap(snf->buf[fdm_bbm_pos1], snf->buf[fdm_bbm_pos2]); +} + +static int mtk_snand_read_page_cache(struct mtk_snand *snf, + const struct spi_mem_op *op) +{ + u8 *buf = snf->buf; + u8 *buf_fdm = buf + snf->nfi_cfg.page_size; + // the address part to be sent by the controller + u32 op_addr = op->addr.val; + // where to start copying data from bounce buffer + u32 rd_offset = 0; + u32 dummy_clk = (op->dummy.nbytes * BITS_PER_BYTE / op->dummy.buswidth); + u32 op_mode = 0; + u32 dma_len = snf->buf_len; + int ret = 0; + u32 rd_mode, rd_bytes, val; + dma_addr_t buf_dma; + + if (snf->autofmt) { + u32 last_bit; + u32 mask; + + dma_len = snf->nfi_cfg.page_size; + op_mode = CNFG_AUTO_FMT_EN; + if (op->data.ecc) + op_mode |= CNFG_HW_ECC_EN; + // extract the plane bit: + // Find the highest bit set in (pagesize+oobsize). + // Bits higher than that in op->addr are kept and sent over SPI + // Lower bits are used as an offset for copying data from DMA + // bounce buffer. + last_bit = fls(snf->nfi_cfg.page_size + snf->nfi_cfg.oob_size); + mask = (1 << last_bit) - 1; + rd_offset = op_addr & mask; + op_addr &= ~mask; + + // check if we can dma to the caller memory + if (rd_offset == 0 && op->data.nbytes >= snf->nfi_cfg.page_size) + buf = op->data.buf.in; + } + mtk_snand_mac_reset(snf); + mtk_nfi_reset(snf); + + // command and dummy cycles + nfi_write32(snf, SNF_RD_CTL2, + (dummy_clk << DATA_READ_DUMMY_S) | + (op->cmd.opcode << DATA_READ_CMD_S)); + + // read address + nfi_write32(snf, SNF_RD_CTL3, op_addr); + + // Set read op_mode + if (op->data.buswidth == 4) + rd_mode = op->addr.buswidth == 4 ? DATA_READ_MODE_QUAD : + DATA_READ_MODE_X4; + else if (op->data.buswidth == 2) + rd_mode = op->addr.buswidth == 2 ? DATA_READ_MODE_DUAL : + DATA_READ_MODE_X2; + else + rd_mode = DATA_READ_MODE_X1; + rd_mode <<= DATA_READ_MODE_S; + nfi_rmw32(snf, SNF_MISC_CTL, DATA_READ_MODE, + rd_mode | DATARD_CUSTOM_EN); + + // Set bytes to read + rd_bytes = (snf->nfi_cfg.spare_size + snf->caps->sector_size) * + snf->nfi_cfg.nsectors; + nfi_write32(snf, SNF_MISC_CTL2, + (rd_bytes << PROGRAM_LOAD_BYTE_NUM_S) | rd_bytes); + + // NFI read prepare + nfi_write16(snf, NFI_CNFG, + (CNFG_OP_MODE_CUST << CNFG_OP_MODE_S) | CNFG_DMA_BURST_EN | + CNFG_READ_MODE | CNFG_DMA_MODE | op_mode); + + nfi_write32(snf, NFI_CON, (snf->nfi_cfg.nsectors << CON_SEC_NUM_S)); + + buf_dma = dma_map_single(snf->dev, buf, dma_len, DMA_FROM_DEVICE); + ret = dma_mapping_error(snf->dev, buf_dma); + if (ret) { + dev_err(snf->dev, "DMA mapping failed.\n"); + goto cleanup; + } + nfi_write32(snf, NFI_STRADDR, buf_dma); + if (op->data.ecc) { + snf->ecc_cfg->op = ECC_DECODE; + ret = mtk_ecc_enable(snf->ecc, snf->ecc_cfg); + if (ret) + goto cleanup_dma; + } + // Prepare for custom read interrupt + nfi_write32(snf, NFI_INTR_EN, NFI_IRQ_INTR_EN | NFI_IRQ_CUS_READ); + reinit_completion(&snf->op_done); + + // Trigger NFI into custom mode + nfi_write16(snf, NFI_CMD, NFI_CMD_DUMMY_READ); + + // Start DMA read + nfi_rmw32(snf, NFI_CON, 0, CON_BRD); + nfi_write16(snf, NFI_STRDATA, STR_DATA); + + if (!wait_for_completion_timeout( + &snf->op_done, usecs_to_jiffies(SNFI_POLL_INTERVAL))) { + dev_err(snf->dev, "DMA timed out for reading from cache.\n"); + ret = -ETIMEDOUT; + goto cleanup; + } + + // Wait for BUS_SEC_CNTR returning expected value + ret = readl_poll_timeout(snf->nfi_base + NFI_BYTELEN, val, + BUS_SEC_CNTR(val) >= snf->nfi_cfg.nsectors, 0, + SNFI_POLL_INTERVAL); + if (ret) { + dev_err(snf->dev, "Timed out waiting for BUS_SEC_CNTR\n"); + goto cleanup2; + } + + // Wait for bus becoming idle + ret = readl_poll_timeout(snf->nfi_base + NFI_MASTERSTA, val, + !(val & snf->caps->mastersta_mask), 0, + SNFI_POLL_INTERVAL); + if (ret) { + dev_err(snf->dev, "Timed out waiting for bus becoming idle\n"); + goto cleanup2; + } + + if (op->data.ecc) { + ret = mtk_ecc_wait_done(snf->ecc, ECC_DECODE); + if (ret) { + dev_err(snf->dev, "wait ecc done timeout\n"); + goto cleanup2; + } + // save status before disabling ecc + mtk_ecc_get_stats(snf->ecc, &snf->ecc_stats, + snf->nfi_cfg.nsectors); + } + + dma_unmap_single(snf->dev, buf_dma, dma_len, DMA_FROM_DEVICE); + + if (snf->autofmt) { + mtk_snand_read_fdm(snf, buf_fdm); + if (snf->caps->bbm_swap) { + mtk_snand_bm_swap(snf, buf); + mtk_snand_fdm_bm_swap(snf); + } + } + + // copy data back + if (nfi_read32(snf, NFI_STA) & READ_EMPTY) { + memset(op->data.buf.in, 0xff, op->data.nbytes); + snf->ecc_stats.bitflips = 0; + snf->ecc_stats.failed = 0; + snf->ecc_stats.corrected = 0; + } else { + if (buf == op->data.buf.in) { + u32 cap_len = snf->buf_len - snf->nfi_cfg.page_size; + u32 req_left = op->data.nbytes - snf->nfi_cfg.page_size; + + if (req_left) + memcpy(op->data.buf.in + snf->nfi_cfg.page_size, + buf_fdm, + cap_len < req_left ? cap_len : req_left); + } else if (rd_offset < snf->buf_len) { + u32 cap_len = snf->buf_len - rd_offset; + + if (op->data.nbytes < cap_len) + cap_len = op->data.nbytes; + memcpy(op->data.buf.in, snf->buf + rd_offset, cap_len); + } + } +cleanup2: + if (op->data.ecc) + mtk_ecc_disable(snf->ecc); +cleanup_dma: + // unmap dma only if any error happens. (otherwise it's done before + // data copying) + if (ret) + dma_unmap_single(snf->dev, buf_dma, dma_len, DMA_FROM_DEVICE); +cleanup: + // Stop read + nfi_write32(snf, NFI_CON, 0); + nfi_write16(snf, NFI_CNFG, 0); + + // Clear SNF done flag + nfi_rmw32(snf, SNF_STA_CTL1, 0, CUS_READ_DONE); + nfi_write32(snf, SNF_STA_CTL1, 0); + + // Disable interrupt + nfi_read32(snf, NFI_INTR_STA); + nfi_write32(snf, NFI_INTR_EN, 0); + + nfi_rmw32(snf, SNF_MISC_CTL, DATARD_CUSTOM_EN, 0); + return ret; +} + +static int mtk_snand_write_page_cache(struct mtk_snand *snf, + const struct spi_mem_op *op) +{ + // the address part to be sent by the controller + u32 op_addr = op->addr.val; + // where to start copying data from bounce buffer + u32 wr_offset = 0; + u32 op_mode = 0; + int ret = 0; + u32 wr_mode = 0; + u32 dma_len = snf->buf_len; + u32 wr_bytes, val; + size_t cap_len; + dma_addr_t buf_dma; + + if (snf->autofmt) { + u32 last_bit; + u32 mask; + + dma_len = snf->nfi_cfg.page_size; + op_mode = CNFG_AUTO_FMT_EN; + if (op->data.ecc) + op_mode |= CNFG_HW_ECC_EN; + + last_bit = fls(snf->nfi_cfg.page_size + snf->nfi_cfg.oob_size); + mask = (1 << last_bit) - 1; + wr_offset = op_addr & mask; + op_addr &= ~mask; + } + mtk_snand_mac_reset(snf); + mtk_nfi_reset(snf); + + if (wr_offset) + memset(snf->buf, 0xff, wr_offset); + + cap_len = snf->buf_len - wr_offset; + if (op->data.nbytes < cap_len) + cap_len = op->data.nbytes; + memcpy(snf->buf + wr_offset, op->data.buf.out, cap_len); + if (snf->autofmt) { + if (snf->caps->bbm_swap) { + mtk_snand_fdm_bm_swap(snf); + mtk_snand_bm_swap(snf, snf->buf); + } + mtk_snand_write_fdm(snf, snf->buf + snf->nfi_cfg.page_size); + } + + // Command + nfi_write32(snf, SNF_PG_CTL1, (op->cmd.opcode << PG_LOAD_CMD_S)); + + // write address + nfi_write32(snf, SNF_PG_CTL2, op_addr); + + // Set read op_mode + if (op->data.buswidth == 4) + wr_mode = PG_LOAD_X4_EN; + + nfi_rmw32(snf, SNF_MISC_CTL, PG_LOAD_X4_EN, + wr_mode | PG_LOAD_CUSTOM_EN); + + // Set bytes to write + wr_bytes = (snf->nfi_cfg.spare_size + snf->caps->sector_size) * + snf->nfi_cfg.nsectors; + nfi_write32(snf, SNF_MISC_CTL2, + (wr_bytes << PROGRAM_LOAD_BYTE_NUM_S) | wr_bytes); + + // NFI write prepare + nfi_write16(snf, NFI_CNFG, + (CNFG_OP_MODE_PROGRAM << CNFG_OP_MODE_S) | + CNFG_DMA_BURST_EN | CNFG_DMA_MODE | op_mode); + + nfi_write32(snf, NFI_CON, (snf->nfi_cfg.nsectors << CON_SEC_NUM_S)); + buf_dma = dma_map_single(snf->dev, snf->buf, dma_len, DMA_TO_DEVICE); + ret = dma_mapping_error(snf->dev, buf_dma); + if (ret) { + dev_err(snf->dev, "DMA mapping failed.\n"); + goto cleanup; + } + nfi_write32(snf, NFI_STRADDR, buf_dma); + if (op->data.ecc) { + snf->ecc_cfg->op = ECC_ENCODE; + ret = mtk_ecc_enable(snf->ecc, snf->ecc_cfg); + if (ret) + goto cleanup_dma; + } + // Prepare for custom write interrupt + nfi_write32(snf, NFI_INTR_EN, NFI_IRQ_INTR_EN | NFI_IRQ_CUS_PG); + reinit_completion(&snf->op_done); + ; + + // Trigger NFI into custom mode + nfi_write16(snf, NFI_CMD, NFI_CMD_DUMMY_WRITE); + + // Start DMA write + nfi_rmw32(snf, NFI_CON, 0, CON_BWR); + nfi_write16(snf, NFI_STRDATA, STR_DATA); + + if (!wait_for_completion_timeout( + &snf->op_done, usecs_to_jiffies(SNFI_POLL_INTERVAL))) { + dev_err(snf->dev, "DMA timed out for program load.\n"); + ret = -ETIMEDOUT; + goto cleanup_ecc; + } + + // Wait for NFI_SEC_CNTR returning expected value + ret = readl_poll_timeout(snf->nfi_base + NFI_ADDRCNTR, val, + NFI_SEC_CNTR(val) >= snf->nfi_cfg.nsectors, 0, + SNFI_POLL_INTERVAL); + if (ret) + dev_err(snf->dev, "Timed out waiting for NFI_SEC_CNTR\n"); + +cleanup_ecc: + if (op->data.ecc) + mtk_ecc_disable(snf->ecc); +cleanup_dma: + dma_unmap_single(snf->dev, buf_dma, dma_len, DMA_TO_DEVICE); +cleanup: + // Stop write + nfi_write32(snf, NFI_CON, 0); + nfi_write16(snf, NFI_CNFG, 0); + + // Clear SNF done flag + nfi_rmw32(snf, SNF_STA_CTL1, 0, CUS_PG_DONE); + nfi_write32(snf, SNF_STA_CTL1, 0); + + // Disable interrupt + nfi_read32(snf, NFI_INTR_STA); + nfi_write32(snf, NFI_INTR_EN, 0); + + nfi_rmw32(snf, SNF_MISC_CTL, PG_LOAD_CUSTOM_EN, 0); + + return ret; +} + +/** + * mtk_snand_is_page_ops() - check if the op is a controller supported page op. + * @op spi-mem op to check + * + * Check whether op can be executed with read_from_cache or program_load + * mode in the controller. + * This controller can execute typical Read From Cache and Program Load + * instructions found on SPI-NAND with 2-byte address. + * DTR and cmd buswidth & nbytes should be checked before calling this. + * + * Return: true if the op matches the instruction template + */ +static bool mtk_snand_is_page_ops(const struct spi_mem_op *op) +{ + if (op->addr.nbytes != 2) + return false; + + if (op->addr.buswidth != 1 && op->addr.buswidth != 2 && + op->addr.buswidth != 4) + return false; + + // match read from page instructions + if (op->data.dir == SPI_MEM_DATA_IN) { + // check dummy cycle first + if (op->dummy.nbytes * BITS_PER_BYTE / op->dummy.buswidth > + DATA_READ_MAX_DUMMY) + return false; + // quad io / quad out + if ((op->addr.buswidth == 4 || op->addr.buswidth == 1) && + op->data.buswidth == 4) + return true; + + // dual io / dual out + if ((op->addr.buswidth == 2 || op->addr.buswidth == 1) && + op->data.buswidth == 2) + return true; + + // standard spi + if (op->addr.buswidth == 1 && op->data.buswidth == 1) + return true; + } else if (op->data.dir == SPI_MEM_DATA_OUT) { + // check dummy cycle first + if (op->dummy.nbytes) + return false; + // program load quad out + if (op->addr.buswidth == 1 && op->data.buswidth == 4) + return true; + // standard spi + if (op->addr.buswidth == 1 && op->data.buswidth == 1) + return true; + } + return false; +} + +static bool mtk_snand_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + if (!spi_mem_default_supports_op(mem, op)) + return false; + if (op->cmd.nbytes != 1 || op->cmd.buswidth != 1) + return false; + if (mtk_snand_is_page_ops(op)) + return true; + return ((op->addr.nbytes == 0 || op->addr.buswidth == 1) && + (op->dummy.nbytes == 0 || op->dummy.buswidth == 1) && + (op->data.nbytes == 0 || op->data.buswidth == 1)); +} + +static int mtk_snand_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + struct mtk_snand *ms = spi_controller_get_devdata(mem->spi->master); + // page ops transfer size must be exactly ((sector_size + spare_size) * + // nsectors). Limit the op size if the caller requests more than that. + // exec_op will read more than needed and discard the leftover if the + // caller requests less data. + if (mtk_snand_is_page_ops(op)) { + size_t l; + // skip adjust_op_size for page ops + if (ms->autofmt) + return 0; + l = ms->caps->sector_size + ms->nfi_cfg.spare_size; + l *= ms->nfi_cfg.nsectors; + if (op->data.nbytes > l) + op->data.nbytes = l; + } else { + size_t hl = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes; + + if (hl >= SNF_GPRAM_SIZE) + return -EOPNOTSUPP; + if (op->data.nbytes > SNF_GPRAM_SIZE - hl) + op->data.nbytes = SNF_GPRAM_SIZE - hl; + } + return 0; +} + +static int mtk_snand_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct mtk_snand *ms = spi_controller_get_devdata(mem->spi->master); + + dev_dbg(ms->dev, "OP %02x ADDR %08llX@%d:%u DATA %d:%u", op->cmd.opcode, + op->addr.val, op->addr.buswidth, op->addr.nbytes, + op->data.buswidth, op->data.nbytes); + if (mtk_snand_is_page_ops(op)) { + if (op->data.dir == SPI_MEM_DATA_IN) + return mtk_snand_read_page_cache(ms, op); + else + return mtk_snand_write_page_cache(ms, op); + } else { + return mtk_snand_mac_io(ms, op); + } +} + +static const struct spi_controller_mem_ops mtk_snand_mem_ops = { + .adjust_op_size = mtk_snand_adjust_op_size, + .supports_op = mtk_snand_supports_op, + .exec_op = mtk_snand_exec_op, +}; + +static const struct spi_controller_mem_caps mtk_snand_mem_caps = { + .ecc = true, +}; + +static irqreturn_t mtk_snand_irq(int irq, void *id) +{ + struct mtk_snand *snf = id; + u32 sta, ien; + + sta = nfi_read32(snf, NFI_INTR_STA); + ien = nfi_read32(snf, NFI_INTR_EN); + + if (!(sta & ien)) + return IRQ_NONE; + + nfi_write32(snf, NFI_INTR_EN, 0); + complete(&snf->op_done); + return IRQ_HANDLED; +} + +static const struct of_device_id mtk_snand_ids[] = { + { .compatible = "mediatek,mt7622-snand", .data = &mt7622_snand_caps }, + { .compatible = "mediatek,mt7629-snand", .data = &mt7629_snand_caps }, + {}, +}; + +MODULE_DEVICE_TABLE(of, mtk_snand_ids); + +static int mtk_snand_enable_clk(struct mtk_snand *ms) +{ + int ret; + + ret = clk_prepare_enable(ms->nfi_clk); + if (ret) { + dev_err(ms->dev, "unable to enable nfi clk\n"); + return ret; + } + ret = clk_prepare_enable(ms->pad_clk); + if (ret) { + dev_err(ms->dev, "unable to enable pad clk\n"); + goto err1; + } + return 0; +err1: + clk_disable_unprepare(ms->nfi_clk); + return ret; +} + +static void mtk_snand_disable_clk(struct mtk_snand *ms) +{ + clk_disable_unprepare(ms->pad_clk); + clk_disable_unprepare(ms->nfi_clk); +} + +static int mtk_snand_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *dev_id; + struct spi_controller *ctlr; + struct mtk_snand *ms; + int ret; + + dev_id = of_match_node(mtk_snand_ids, np); + if (!dev_id) + return -EINVAL; + + ctlr = devm_spi_alloc_master(&pdev->dev, sizeof(*ms)); + if (!ctlr) + return -ENOMEM; + platform_set_drvdata(pdev, ctlr); + + ms = spi_controller_get_devdata(ctlr); + + ms->ctlr = ctlr; + ms->caps = dev_id->data; + + ms->ecc = of_mtk_ecc_get(np); + if (IS_ERR(ms->ecc)) + return PTR_ERR(ms->ecc); + else if (!ms->ecc) + return -ENODEV; + + ms->nfi_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(ms->nfi_base)) { + ret = PTR_ERR(ms->nfi_base); + goto release_ecc; + } + + ms->dev = &pdev->dev; + + ms->nfi_clk = devm_clk_get(&pdev->dev, "nfi_clk"); + if (IS_ERR(ms->nfi_clk)) { + ret = PTR_ERR(ms->nfi_clk); + dev_err(&pdev->dev, "unable to get nfi_clk, err = %d\n", ret); + goto release_ecc; + } + + ms->pad_clk = devm_clk_get(&pdev->dev, "pad_clk"); + if (IS_ERR(ms->pad_clk)) { + ret = PTR_ERR(ms->pad_clk); + dev_err(&pdev->dev, "unable to get pad_clk, err = %d\n", ret); + goto release_ecc; + } + + ret = mtk_snand_enable_clk(ms); + if (ret) + goto release_ecc; + + init_completion(&ms->op_done); + + ms->irq = platform_get_irq(pdev, 0); + if (ms->irq < 0) { + ret = ms->irq; + goto disable_clk; + } + ret = devm_request_irq(ms->dev, ms->irq, mtk_snand_irq, 0x0, + "mtk-snand", ms); + if (ret) { + dev_err(ms->dev, "failed to request snfi irq\n"); + goto disable_clk; + } + + ret = dma_set_mask(ms->dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(ms->dev, "failed to set dma mask\n"); + goto disable_clk; + } + + // switch to SNFI mode + nfi_write32(ms, SNF_CFG, SPI_MODE); + + // setup an initial page format for ops matching page_cache_op template + // before ECC is called. + ret = mtk_snand_setup_pagefmt(ms, ms->caps->sector_size, + ms->caps->spare_sizes[0]); + if (ret) { + dev_err(ms->dev, "failed to set initial page format\n"); + goto disable_clk; + } + + // setup ECC engine + ms->ecc_eng.dev = &pdev->dev; + ms->ecc_eng.integration = NAND_ECC_ENGINE_INTEGRATION_PIPELINED; + ms->ecc_eng.ops = &mtk_snfi_ecc_engine_ops; + ms->ecc_eng.priv = ms; + + ret = nand_ecc_register_on_host_hw_engine(&ms->ecc_eng); + if (ret) { + dev_err(&pdev->dev, "failed to register ecc engine.\n"); + goto disable_clk; + } + + ctlr->num_chipselect = 1; + ctlr->mem_ops = &mtk_snand_mem_ops; + ctlr->mem_caps = &mtk_snand_mem_caps; + ctlr->bits_per_word_mask = SPI_BPW_MASK(8); + ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; + ctlr->dev.of_node = pdev->dev.of_node; + ret = spi_register_controller(ctlr); + if (ret) { + dev_err(&pdev->dev, "spi_register_controller failed.\n"); + goto disable_clk; + } + + return 0; +disable_clk: + mtk_snand_disable_clk(ms); +release_ecc: + mtk_ecc_release(ms->ecc); + return ret; +} + +static int mtk_snand_remove(struct platform_device *pdev) +{ + struct spi_controller *ctlr = platform_get_drvdata(pdev); + struct mtk_snand *ms = spi_controller_get_devdata(ctlr); + + spi_unregister_controller(ctlr); + mtk_snand_disable_clk(ms); + mtk_ecc_release(ms->ecc); + kfree(ms->buf); + return 0; +} + +static struct platform_driver mtk_snand_driver = { + .probe = mtk_snand_probe, + .remove = mtk_snand_remove, + .driver = { + .name = "mtk-snand", + .of_match_table = mtk_snand_ids, + }, +}; + +module_platform_driver(mtk_snand_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Chuanhong Guo <gch981213@gmail.com>"); +MODULE_DESCRIPTION("MeidaTek SPI-NAND Flash Controller Driver"); diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c index 435309b09227..55178579f3c6 100644 --- a/drivers/spi/spi-mxs.c +++ b/drivers/spi/spi-mxs.c @@ -605,9 +605,8 @@ static int mxs_spi_probe(struct platform_device *pdev) } } - ret = pm_runtime_get_sync(ssp->dev); + ret = pm_runtime_resume_and_get(ssp->dev); if (ret < 0) { - pm_runtime_put_noidle(ssp->dev); dev_err(ssp->dev, "runtime_get_sync failed\n"); goto out_pm_runtime_disable; } diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 60c9cdf1c94b..c42e59df38fe 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -246,9 +246,8 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable) enable = !enable; if (spi->controller_state) { - int err = pm_runtime_get_sync(mcspi->dev); + int err = pm_runtime_resume_and_get(mcspi->dev); if (err < 0) { - pm_runtime_put_noidle(mcspi->dev); dev_err(mcspi->dev, "failed to get sync: %d\n", err); return; } @@ -758,6 +757,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_vdbg(&spi->dev, "read-%d %02x\n", word_len, *(rx - 1)); } + /* Add word delay between each word */ + spi_delay_exec(&xfer->word_delay, xfer); } while (c); } else if (word_len <= 16) { u16 *rx; @@ -805,6 +806,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_vdbg(&spi->dev, "read-%d %04x\n", word_len, *(rx - 1)); } + /* Add word delay between each word */ + spi_delay_exec(&xfer->word_delay, xfer); } while (c >= 2); } else if (word_len <= 32) { u32 *rx; @@ -852,6 +855,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_vdbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); } + /* Add word delay between each word */ + spi_delay_exec(&xfer->word_delay, xfer); } while (c >= 4); } @@ -1068,9 +1073,8 @@ static int omap2_mcspi_setup(struct spi_device *spi) initial_setup = true; } - ret = pm_runtime_get_sync(mcspi->dev); + ret = pm_runtime_resume_and_get(mcspi->dev); if (ret < 0) { - pm_runtime_put_noidle(mcspi->dev); if (initial_setup) omap2_mcspi_cleanup(spi); @@ -1317,12 +1321,9 @@ static int omap2_mcspi_controller_setup(struct omap2_mcspi *mcspi) struct omap2_mcspi_regs *ctx = &mcspi->ctx; int ret = 0; - ret = pm_runtime_get_sync(mcspi->dev); - if (ret < 0) { - pm_runtime_put_noidle(mcspi->dev); - + ret = pm_runtime_resume_and_get(mcspi->dev); + if (ret < 0) return ret; - } mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, OMAP2_MCSPI_WAKEUPENABLE_WKEN); diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index cdc16eecaf6b..a08215eb9e14 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -196,6 +196,8 @@ struct rockchip_spi { bool slave_abort; bool cs_inactive; /* spi slave tansmition stop when cs inactive */ + bool cs_high_supported; /* native CS supports active-high polarity */ + struct spi_transfer *xfer; /* Store xfer temporarily */ }; @@ -719,6 +721,11 @@ static int rockchip_spi_setup(struct spi_device *spi) struct rockchip_spi *rs = spi_controller_get_devdata(spi->controller); u32 cr0; + if (!spi->cs_gpiod && (spi->mode & SPI_CS_HIGH) && !rs->cs_high_supported) { + dev_warn(&spi->dev, "setup: non GPIO CS can't be active-high\n"); + return -EINVAL; + } + pm_runtime_get_sync(rs->dev); cr0 = readl_relaxed(rs->regs + ROCKCHIP_SPI_CTRLR0); @@ -899,6 +906,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) switch (readl_relaxed(rs->regs + ROCKCHIP_SPI_VERSION)) { case ROCKCHIP_SPI_VER2_TYPE2: + rs->cs_high_supported = true; ctlr->mode_bits |= SPI_CS_HIGH; if (ctlr->can_dma && slave_mode) rs->cs_inactive = true; diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index bd5708d7e5a1..7a014eeec2d0 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -1108,14 +1108,11 @@ static struct dma_chan *rspi_request_dma_chan(struct device *dev, } memset(&cfg, 0, sizeof(cfg)); + cfg.dst_addr = port_addr + RSPI_SPDR; + cfg.src_addr = port_addr + RSPI_SPDR; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; cfg.direction = dir; - if (dir == DMA_MEM_TO_DEV) { - cfg.dst_addr = port_addr; - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - } else { - cfg.src_addr = port_addr; - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - } ret = dmaengine_slave_config(chan, &cfg); if (ret) { @@ -1146,12 +1143,12 @@ static int rspi_request_dma(struct device *dev, struct spi_controller *ctlr, } ctlr->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id, - res->start + RSPI_SPDR); + res->start); if (!ctlr->dma_tx) return -ENODEV; ctlr->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id, - res->start + RSPI_SPDR); + res->start); if (!ctlr->dma_rx) { dma_release_channel(ctlr->dma_tx); ctlr->dma_tx = NULL; diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c index 28e70db9bbba..65b8075da4eb 100644 --- a/drivers/spi/spi-sprd.c +++ b/drivers/spi/spi-sprd.c @@ -1008,9 +1008,8 @@ static int sprd_spi_remove(struct platform_device *pdev) struct sprd_spi *ss = spi_controller_get_devdata(sctlr); int ret; - ret = pm_runtime_get_sync(ss->dev); + ret = pm_runtime_resume_and_get(ss->dev); if (ret < 0) { - pm_runtime_put_noidle(ss->dev); dev_err(ss->dev, "failed to resume SPI controller\n"); return ret; } diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index ffdc55f87e82..c0239e405c39 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -305,10 +305,8 @@ static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi, u32 cr, sr; int err = 0; - if (!op->data.nbytes) - goto wait_nobusy; - - if (readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF) + if ((readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF) || + qspi->fmode == CCR_FMODE_APM) goto out; reinit_completion(&qspi->data_completion); @@ -327,7 +325,6 @@ static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi, out: /* clear flags */ writel_relaxed(FCR_CTCF | FCR_CTEF, qspi->io_base + QSPI_FCR); -wait_nobusy: if (!err) err = stm32_qspi_wait_nobusy(qspi); @@ -372,10 +369,6 @@ static int stm32_qspi_send(struct spi_mem *mem, const struct spi_mem_op *op) op->dummy.buswidth, op->data.buswidth, op->addr.val, op->data.nbytes); - err = stm32_qspi_wait_nobusy(qspi); - if (err) - goto abort; - cr = readl_relaxed(qspi->io_base + QSPI_CR); cr &= ~CR_PRESC_MASK & ~CR_FSEL; cr |= FIELD_PREP(CR_PRESC_MASK, flash->presc); @@ -463,11 +456,9 @@ static int stm32_qspi_poll_status(struct spi_mem *mem, const struct spi_mem_op * if (!spi_mem_supports_op(mem, op)) return -EOPNOTSUPP; - ret = pm_runtime_get_sync(qspi->dev); - if (ret < 0) { - pm_runtime_put_noidle(qspi->dev); + ret = pm_runtime_resume_and_get(qspi->dev); + if (ret < 0) return ret; - } mutex_lock(&qspi->lock); @@ -490,11 +481,9 @@ static int stm32_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master); int ret; - ret = pm_runtime_get_sync(qspi->dev); - if (ret < 0) { - pm_runtime_put_noidle(qspi->dev); + ret = pm_runtime_resume_and_get(qspi->dev); + if (ret < 0) return ret; - } mutex_lock(&qspi->lock); if (op->data.dir == SPI_MEM_DATA_IN && op->data.nbytes) @@ -536,11 +525,9 @@ static ssize_t stm32_qspi_dirmap_read(struct spi_mem_dirmap_desc *desc, u32 addr_max; int ret; - ret = pm_runtime_get_sync(qspi->dev); - if (ret < 0) { - pm_runtime_put_noidle(qspi->dev); + ret = pm_runtime_resume_and_get(qspi->dev); + if (ret < 0) return ret; - } mutex_lock(&qspi->lock); /* make a local copy of desc op_tmpl and complete dirmap rdesc @@ -583,11 +570,9 @@ static int stm32_qspi_setup(struct spi_device *spi) if (!spi->max_speed_hz) return -EINVAL; - ret = pm_runtime_get_sync(qspi->dev); - if (ret < 0) { - pm_runtime_put_noidle(qspi->dev); + ret = pm_runtime_resume_and_get(qspi->dev); + if (ret < 0) return ret; - } presc = DIV_ROUND_UP(qspi->clk_rate, spi->max_speed_hz) - 1; @@ -851,11 +836,9 @@ static int __maybe_unused stm32_qspi_resume(struct device *dev) pinctrl_pm_select_default_state(dev); - ret = pm_runtime_get_sync(dev); - if (ret < 0) { - pm_runtime_put_noidle(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) return ret; - } writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR); writel_relaxed(qspi->dcr_reg, qspi->io_base + QSPI_DCR); diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index a6adc20f6862..6fe617b445a5 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -2000,9 +2000,8 @@ static int __maybe_unused stm32_spi_resume(struct device *dev) return ret; } - ret = pm_runtime_get_sync(dev); + ret = pm_runtime_resume_and_get(dev); if (ret < 0) { - pm_runtime_put_noidle(dev); dev_err(dev, "Unable to power device:%d\n", ret); return ret; } diff --git a/drivers/spi/spi-sunplus-sp7021.c b/drivers/spi/spi-sunplus-sp7021.c index f989f7b99296..f1fa88777575 100644 --- a/drivers/spi/spi-sunplus-sp7021.c +++ b/drivers/spi/spi-sunplus-sp7021.c @@ -85,8 +85,6 @@ struct sp7021_spi_ctlr { int s_irq; struct clk *spi_clk; struct reset_control *rstc; - // irq spin lock - spinlock_t lock; // data xfer lock struct mutex buf_lock; struct completion isr_done; @@ -199,8 +197,6 @@ static irqreturn_t sp7021_spi_master_irq(int irq, void *dev) if (tx_len == 0 && total_len == 0) return IRQ_NONE; - spin_lock_irq(&pspim->lock); - rx_cnt = FIELD_GET(SP7021_RX_CNT_MASK, fd_status); if (fd_status & SP7021_RX_FULL_FLAG) rx_cnt = pspim->data_unit; @@ -239,7 +235,6 @@ static irqreturn_t sp7021_spi_master_irq(int irq, void *dev) if (isrdone) complete(&pspim->isr_done); - spin_unlock_irq(&pspim->lock); return IRQ_HANDLED; } @@ -446,7 +441,6 @@ static int sp7021_spi_controller_probe(struct platform_device *pdev) pspim->mode = mode; pspim->ctlr = ctlr; pspim->dev = dev; - spin_lock_init(&pspim->lock); mutex_init(&pspim->buf_lock); init_completion(&pspim->isr_done); init_completion(&pspim->slave_isr); diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 8f345247a8c3..d9be80e3e1bc 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -964,9 +964,8 @@ static int tegra_spi_setup(struct spi_device *spi) spi->controller_data = cdata; } - ret = pm_runtime_get_sync(tspi->dev); + ret = pm_runtime_resume_and_get(tspi->dev); if (ret < 0) { - pm_runtime_put_noidle(tspi->dev); dev_err(tspi->dev, "pm runtime failed, e = %d\n", ret); if (cdata) tegra_spi_cleanup(spi); @@ -1394,10 +1393,9 @@ static int tegra_spi_probe(struct platform_device *pdev) goto exit_pm_disable; } - ret = pm_runtime_get_sync(&pdev->dev); + ret = pm_runtime_resume_and_get(&pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret); - pm_runtime_put_noidle(&pdev->dev); goto exit_pm_disable; } @@ -1476,9 +1474,8 @@ static int tegra_spi_resume(struct device *dev) struct tegra_spi_data *tspi = spi_master_get_devdata(master); int ret; - ret = pm_runtime_get_sync(dev); + ret = pm_runtime_resume_and_get(dev); if (ret < 0) { - pm_runtime_put_noidle(dev); dev_err(dev, "pm runtime failed, e = %d\n", ret); return ret; } diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c index 2888d8a8dc6d..220ee08c4a06 100644 --- a/drivers/spi/spi-tegra20-sflash.c +++ b/drivers/spi/spi-tegra20-sflash.c @@ -486,10 +486,9 @@ static int tegra_sflash_probe(struct platform_device *pdev) goto exit_pm_disable; } - ret = pm_runtime_get_sync(&pdev->dev); + ret = pm_runtime_resume_and_get(&pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret); - pm_runtime_put_noidle(&pdev->dev); goto exit_pm_disable; } @@ -549,9 +548,8 @@ static int tegra_sflash_resume(struct device *dev) struct tegra_sflash_data *tsd = spi_master_get_devdata(master); int ret; - ret = pm_runtime_get_sync(dev); + ret = pm_runtime_resume_and_get(dev); if (ret < 0) { - pm_runtime_put_noidle(dev); dev_err(dev, "pm runtime failed, e = %d\n", ret); return ret; } diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 80c3787deea9..38360434d6e9 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -749,9 +749,8 @@ static int tegra_slink_setup(struct spi_device *spi) spi->mode & SPI_CPHA ? "" : "~", spi->max_speed_hz); - ret = pm_runtime_get_sync(tspi->dev); + ret = pm_runtime_resume_and_get(tspi->dev); if (ret < 0) { - pm_runtime_put_noidle(tspi->dev); dev_err(tspi->dev, "pm runtime failed, e = %d\n", ret); return ret; } @@ -1169,9 +1168,8 @@ static int tegra_slink_resume(struct device *dev) struct tegra_slink_data *tspi = spi_master_get_devdata(master); int ret; - ret = pm_runtime_get_sync(dev); + ret = pm_runtime_resume_and_get(dev); if (ret < 0) { - pm_runtime_put_noidle(dev); dev_err(dev, "pm runtime failed, e = %d\n", ret); return ret; } diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index e06aafe169e0..b5b65d882d7a 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -172,9 +172,8 @@ static int ti_qspi_setup(struct spi_device *spi) dev_dbg(qspi->dev, "hz: %d, clock divider %d\n", qspi->spi_max_frequency, clk_div); - ret = pm_runtime_get_sync(qspi->dev); + ret = pm_runtime_resume_and_get(qspi->dev); if (ret < 0) { - pm_runtime_put_noidle(qspi->dev); dev_err(qspi->dev, "pm_runtime_get_sync() failed\n"); return ret; } @@ -448,6 +447,7 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst, enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; struct dma_async_tx_descriptor *tx; int ret; + unsigned long time_left; tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags); if (!tx) { @@ -467,9 +467,9 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst, } dma_async_issue_pending(chan); - ret = wait_for_completion_timeout(&qspi->transfer_complete, + time_left = wait_for_completion_timeout(&qspi->transfer_complete, msecs_to_jiffies(len)); - if (ret <= 0) { + if (time_left == 0) { dmaengine_terminate_sync(chan); dev_err(qspi->dev, "DMA wait_for_completion_timeout\n"); return -ETIMEDOUT; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 2e6d6bbeb784..fe252a8075a7 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1611,9 +1611,8 @@ static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread) mutex_lock(&ctlr->io_mutex); if (!was_busy && ctlr->auto_runtime_pm) { - ret = pm_runtime_get_sync(ctlr->dev.parent); + ret = pm_runtime_resume_and_get(ctlr->dev.parent); if (ret < 0) { - pm_runtime_put_noidle(ctlr->dev.parent); dev_err(&ctlr->dev, "Failed to power device: %d\n", ret); mutex_unlock(&ctlr->io_mutex); @@ -3475,7 +3474,7 @@ static int __spi_validate_bits_per_word(struct spi_controller *ctlr, int spi_setup(struct spi_device *spi) { unsigned bad_bits, ugly_bits; - int status; + int status = 0; /* * Check mode to prevent that any two of DUAL, QUAD and NO_MOSI/MISO @@ -3518,13 +3517,18 @@ int spi_setup(struct spi_device *spi) return -EINVAL; } - if (!spi->bits_per_word) + if (!spi->bits_per_word) { spi->bits_per_word = 8; - - status = __spi_validate_bits_per_word(spi->controller, - spi->bits_per_word); - if (status) - return status; + } else { + /* + * Some controllers may not support the default 8 bits-per-word + * so only perform the check when this is explicitly provided. + */ + status = __spi_validate_bits_per_word(spi->controller, + spi->bits_per_word); + if (status) + return status; + } if (spi->controller->max_speed_hz && (!spi->max_speed_hz || @@ -3544,10 +3548,9 @@ int spi_setup(struct spi_device *spi) } if (spi->controller->auto_runtime_pm && spi->controller->set_cs) { - status = pm_runtime_get_sync(spi->controller->dev.parent); + status = pm_runtime_resume_and_get(spi->controller->dev.parent); if (status < 0) { mutex_unlock(&spi->controller->io_mutex); - pm_runtime_put_noidle(spi->controller->dev.parent); dev_err(&spi->controller->dev, "Failed to power device: %d\n", status); return status; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 53a551714265..b2775d82d2d7 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -8,19 +8,18 @@ */ #include <linux/init.h> -#include <linux/module.h> #include <linux/ioctl.h> #include <linux/fs.h> #include <linux/device.h> #include <linux/err.h> #include <linux/list.h> #include <linux/errno.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> #include <linux/mutex.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/compat.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/acpi.h> #include <linux/spi/spi.h> #include <linux/spi/spidev.h> @@ -46,6 +45,7 @@ static DECLARE_BITMAP(minors, N_SPI_MINORS); +static_assert(N_SPI_MINORS > 0 && N_SPI_MINORS <= 256); /* Bit masks for spi_device.mode management. Note that incorrect * settings for some settings can cause *lots* of trouble for other @@ -63,7 +63,8 @@ static DECLARE_BITMAP(minors, N_SPI_MINORS); | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \ | SPI_NO_CS | SPI_READY | SPI_TX_DUAL \ | SPI_TX_QUAD | SPI_TX_OCTAL | SPI_RX_DUAL \ - | SPI_RX_QUAD | SPI_RX_OCTAL) + | SPI_RX_QUAD | SPI_RX_OCTAL \ + | SPI_RX_CPHA_FLIP) struct spidev_data { dev_t devt; @@ -568,19 +569,20 @@ spidev_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) static int spidev_open(struct inode *inode, struct file *filp) { - struct spidev_data *spidev; + struct spidev_data *spidev = NULL, *iter; int status = -ENXIO; mutex_lock(&device_list_lock); - list_for_each_entry(spidev, &device_list, device_entry) { - if (spidev->devt == inode->i_rdev) { + list_for_each_entry(iter, &device_list, device_entry) { + if (iter->devt == inode->i_rdev) { status = 0; + spidev = iter; break; } } - if (status) { + if (!spidev) { pr_debug("spidev: nothing for minor %d\n", iminor(inode)); goto err_find_dev; } @@ -693,25 +695,38 @@ static const struct spi_device_id spidev_spi_ids[] = { }; MODULE_DEVICE_TABLE(spi, spidev_spi_ids); -#ifdef CONFIG_OF +/* + * spidev should never be referenced in DT without a specific compatible string, + * it is a Linux implementation thing rather than a description of the hardware. + */ +static int spidev_of_check(struct device *dev) +{ + if (device_property_match_string(dev, "compatible", "spidev") < 0) + return 0; + + dev_err(dev, "spidev listed directly in DT is not supported\n"); + return -EINVAL; +} + static const struct of_device_id spidev_dt_ids[] = { - { .compatible = "rohm,dh2228fv" }, - { .compatible = "lineartechnology,ltc2488" }, - { .compatible = "semtech,sx1301" }, - { .compatible = "lwn,bk4" }, - { .compatible = "dh,dhcom-board" }, - { .compatible = "menlo,m53cpld" }, - { .compatible = "cisco,spi-petra" }, - { .compatible = "micron,spi-authenta" }, + { .compatible = "rohm,dh2228fv", .data = &spidev_of_check }, + { .compatible = "lineartechnology,ltc2488", .data = &spidev_of_check }, + { .compatible = "semtech,sx1301", .data = &spidev_of_check }, + { .compatible = "lwn,bk4", .data = &spidev_of_check }, + { .compatible = "dh,dhcom-board", .data = &spidev_of_check }, + { .compatible = "menlo,m53cpld", .data = &spidev_of_check }, + { .compatible = "cisco,spi-petra", .data = &spidev_of_check }, + { .compatible = "micron,spi-authenta", .data = &spidev_of_check }, {}, }; MODULE_DEVICE_TABLE(of, spidev_dt_ids); -#endif - -#ifdef CONFIG_ACPI /* Dummy SPI devices not to be used in production systems */ -#define SPIDEV_ACPI_DUMMY 1 +static int spidev_acpi_check(struct device *dev) +{ + dev_warn(dev, "do not use this driver in production systems!\n"); + return 0; +} static const struct acpi_device_id spidev_acpi_ids[] = { /* @@ -720,51 +735,29 @@ static const struct acpi_device_id spidev_acpi_ids[] = { * description of the connected peripheral and they should also use * a proper driver instead of poking directly to the SPI bus. */ - { "SPT0001", SPIDEV_ACPI_DUMMY }, - { "SPT0002", SPIDEV_ACPI_DUMMY }, - { "SPT0003", SPIDEV_ACPI_DUMMY }, + { "SPT0001", (kernel_ulong_t)&spidev_acpi_check }, + { "SPT0002", (kernel_ulong_t)&spidev_acpi_check }, + { "SPT0003", (kernel_ulong_t)&spidev_acpi_check }, {}, }; MODULE_DEVICE_TABLE(acpi, spidev_acpi_ids); -static void spidev_probe_acpi(struct spi_device *spi) -{ - const struct acpi_device_id *id; - - if (!has_acpi_companion(&spi->dev)) - return; - - id = acpi_match_device(spidev_acpi_ids, &spi->dev); - if (WARN_ON(!id)) - return; - - if (id->driver_data == SPIDEV_ACPI_DUMMY) - dev_warn(&spi->dev, "do not use this driver in production systems!\n"); -} -#else -static inline void spidev_probe_acpi(struct spi_device *spi) {} -#endif - /*-------------------------------------------------------------------------*/ static int spidev_probe(struct spi_device *spi) { + int (*match)(struct device *dev); struct spidev_data *spidev; int status; unsigned long minor; - /* - * spidev should never be referenced in DT without a specific - * compatible string, it is a Linux implementation thing - * rather than a description of the hardware. - */ - if (spi->dev.of_node && of_device_is_compatible(spi->dev.of_node, "spidev")) { - dev_err(&spi->dev, "spidev listed directly in DT is not supported\n"); - return -EINVAL; + match = device_get_match_data(&spi->dev); + if (match) { + status = match(&spi->dev); + if (status) + return status; } - spidev_probe_acpi(spi); - /* Allocate driver data */ spidev = kzalloc(sizeof(*spidev), GFP_KERNEL); if (!spidev) @@ -832,8 +825,8 @@ static void spidev_remove(struct spi_device *spi) static struct spi_driver spidev_spi_driver = { .driver = { .name = "spidev", - .of_match_table = of_match_ptr(spidev_dt_ids), - .acpi_match_table = ACPI_PTR(spidev_acpi_ids), + .of_match_table = spidev_dt_ids, + .acpi_match_table = spidev_acpi_ids, }, .probe = spidev_probe, .remove = spidev_remove, @@ -856,7 +849,6 @@ static int __init spidev_init(void) * that will key udev/mdev to add/remove /dev nodes. Last, register * the driver which manages those device numbers. */ - BUILD_BUG_ON(N_SPI_MINORS > 256); status = register_chrdev(SPIDEV_MAJOR, "spi", &spidev_fops); if (status < 0) return status; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 5f8c063ddff4..df70eb1a671e 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -347,6 +347,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @max_message_size: function that returns the max message size for * a &spi_device; may be %NULL, so the default %SIZE_MAX will be used. * @io_mutex: mutex for physical bus access + * @add_lock: mutex to avoid adding devices to the same chipselect * @bus_lock_spinlock: spinlock for SPI bus locking * @bus_lock_mutex: mutex for exclusion of multiple callers * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use @@ -361,6 +362,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state * @can_dma: determine whether this controller supports DMA + * @dma_map_dev: device which can be used for DMA mapping * @queued: whether this controller is providing an internal message queue * @kworker: pointer to thread struct for message pump * @pump_messages: work struct for scheduling work to the message pump diff --git a/include/uapi/linux/spi/spi.h b/include/uapi/linux/spi/spi.h index 236a85f08ded..9d5f58059703 100644 --- a/include/uapi/linux/spi/spi.h +++ b/include/uapi/linux/spi/spi.h @@ -27,6 +27,7 @@ #define SPI_TX_OCTAL _BITUL(13) /* transmit with 8 wires */ #define SPI_RX_OCTAL _BITUL(14) /* receive with 8 wires */ #define SPI_3WIRE_HIZ _BITUL(15) /* high impedance turnaround */ +#define SPI_RX_CPHA_FLIP _BITUL(16) /* flip CPHA on Rx only xfer */ /* * All the bits defined above should be covered by SPI_MODE_USER_MASK. @@ -36,6 +37,6 @@ * These bits must not overlap. A static assert check should make sure of that. * If adding extra bits, make sure to increase the bit index below as well. */ -#define SPI_MODE_USER_MASK (_BITUL(16) - 1) +#define SPI_MODE_USER_MASK (_BITUL(17) - 1) #endif /* _UAPI_SPI_H */ |