diff options
| -rw-r--r-- | Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt new file mode 100644 index 000000000000..7cfc17e2df31 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt @@ -0,0 +1,22 @@ +* Amlogic G12A USB3 + PCIE Combo PHY binding + +Required properties: +- compatible: Should be "amlogic,meson-g12a-usb3-pcie-phy" +- #phys-cells: must be 1. The cell number is used to select the phy mode + as defined in <dt-bindings/phy/phy.h> between PHY_TYPE_USB3 and PHY_TYPE_PCIE +- reg: The base address and length of the registers +- clocks: a phandle to the 100MHz reference clock of this PHY +- clock-names: must be "ref_clk" +- resets: phandle to the reset lines for the PHY control +- reset-names: must be "phy" + +Example: + usb3_pcie_phy: phy@46000 { + compatible = "amlogic,g12a-usb3-pcie-phy"; + reg = <0x0 0x46000 0x0 0x2000>; + clocks = <&clkc CLKID_PCIE_PLL>; + clock-names = "ref_clk"; + resets = <&reset RESET_PCIE_PHY>; + reset-names = "phy"; + #phy-cells = <1>; + }; |