diff options
| -rw-r--r-- | drivers/char/ipmi/ipmi_msghandler.c | 60 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_plat_data.c | 2 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si.h | 8 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_hardcode.c | 73 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_hotmod.c | 24 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 38 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_pci.c | 22 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_platform.c | 95 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_ssif.c | 81 |
9 files changed, 137 insertions, 266 deletions
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index c44ad18464f1..8a0e97b33cae 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -49,11 +49,17 @@ static int handle_one_recv_msg(struct ipmi_smi *intf, static bool initialized; static bool drvregistered; +/* Numbers in this enumerator should be mapped to ipmi_panic_event_str */ enum ipmi_panic_event_op { IPMI_SEND_PANIC_EVENT_NONE, IPMI_SEND_PANIC_EVENT, - IPMI_SEND_PANIC_EVENT_STRING + IPMI_SEND_PANIC_EVENT_STRING, + IPMI_SEND_PANIC_EVENT_MAX }; + +/* Indices in this array should be mapped to enum ipmi_panic_event_op */ +static const char *const ipmi_panic_event_str[] = { "none", "event", "string", NULL }; + #ifdef CONFIG_IPMI_PANIC_STRING #define IPMI_PANIC_DEFAULT IPMI_SEND_PANIC_EVENT_STRING #elif defined(CONFIG_IPMI_PANIC_EVENT) @@ -68,46 +74,27 @@ static int panic_op_write_handler(const char *val, const struct kernel_param *kp) { char valcp[16]; - char *s; - - strncpy(valcp, val, 15); - valcp[15] = '\0'; + int e; - s = strstrip(valcp); - - if (strcmp(s, "none") == 0) - ipmi_send_panic_event = IPMI_SEND_PANIC_EVENT_NONE; - else if (strcmp(s, "event") == 0) - ipmi_send_panic_event = IPMI_SEND_PANIC_EVENT; - else if (strcmp(s, "string") == 0) - ipmi_send_panic_event = IPMI_SEND_PANIC_EVENT_STRING; - else - return -EINVAL; + strscpy(valcp, val, sizeof(valcp)); + e = match_string(ipmi_panic_event_str, -1, strstrip(valcp)); + if (e < 0) + return e; + ipmi_send_panic_event = e; return 0; } static int panic_op_read_handler(char *buffer, const struct kernel_param *kp) { - switch (ipmi_send_panic_event) { - case IPMI_SEND_PANIC_EVENT_NONE: - strcpy(buffer, "none\n"); - break; - - case IPMI_SEND_PANIC_EVENT: - strcpy(buffer, "event\n"); - break; - - case IPMI_SEND_PANIC_EVENT_STRING: - strcpy(buffer, "string\n"); - break; + const char *event_str; - default: - strcpy(buffer, "???\n"); - break; - } + if (ipmi_send_panic_event >= IPMI_SEND_PANIC_EVENT_MAX) + event_str = "???"; + else + event_str = ipmi_panic_event_str[ipmi_send_panic_event]; - return strlen(buffer); + return sprintf(buffer, "%s\n", event_str); } static const struct kernel_param_ops panic_op_ops = { @@ -2447,10 +2434,8 @@ retry: wait_event(intf->waitq, bmc->dyn_id_set != 2); if (!bmc->dyn_id_set) { - if ((bmc->cc == IPMI_DEVICE_IN_FW_UPDATE_ERR - || bmc->cc == IPMI_DEVICE_IN_INIT_ERR - || bmc->cc == IPMI_NOT_IN_MY_STATE_ERR) - && ++retry_count <= GET_DEVICE_ID_MAX_RETRY) { + if (bmc->cc != IPMI_CC_NO_ERROR && + ++retry_count <= GET_DEVICE_ID_MAX_RETRY) { msleep(500); dev_warn(intf->si_dev, "BMC returned 0x%2.2x, retry get bmc device id\n", @@ -5224,7 +5209,6 @@ module_exit(cleanup_ipmi); module_init(ipmi_init_msghandler_mod); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); -MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI" - " interface."); +MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI interface."); MODULE_VERSION(IPMI_DRIVER_VERSION); MODULE_SOFTDEP("post: ipmi_devintf"); diff --git a/drivers/char/ipmi/ipmi_plat_data.c b/drivers/char/ipmi/ipmi_plat_data.c index 28471ff2a3a3..747b51ae01a8 100644 --- a/drivers/char/ipmi/ipmi_plat_data.c +++ b/drivers/char/ipmi/ipmi_plat_data.c @@ -102,7 +102,7 @@ struct platform_device *ipmi_platform_add(const char *name, unsigned int inst, goto err; } add_properties: - rv = platform_device_add_properties(pdev, pr); + rv = device_create_managed_software_node(&pdev->dev, pr, NULL); if (rv) { dev_err(&pdev->dev, "Unable to add hard-code properties: %d\n", rv); diff --git a/drivers/char/ipmi/ipmi_si.h b/drivers/char/ipmi/ipmi_si.h index bac0ff86e48e..0a4c69539f24 100644 --- a/drivers/char/ipmi/ipmi_si.h +++ b/drivers/char/ipmi/ipmi_si.h @@ -18,10 +18,14 @@ #define DEFAULT_REGSPACING 1 #define DEFAULT_REGSIZE 1 +/* Numbers in this enumerator should be mapped to si_to_str[] */ enum si_type { - SI_TYPE_INVALID, SI_KCS, SI_SMIC, SI_BT + SI_TYPE_INVALID, SI_KCS, SI_SMIC, SI_BT, SI_TYPE_MAX }; +/* Array is defined in the ipmi_si_intf.c */ +extern const char *const si_to_str[]; + enum ipmi_addr_space { IPMI_IO_ADDR_SPACE, IPMI_MEM_ADDR_SPACE }; @@ -48,8 +52,6 @@ struct si_sm_io { enum ipmi_addr_space addr_space; unsigned long addr_data; enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */ - void (*addr_source_cleanup)(struct si_sm_io *io); - void *addr_source_data; union ipmi_smi_info_union addr_info; int (*io_setup)(struct si_sm_io *info); diff --git a/drivers/char/ipmi/ipmi_si_hardcode.c b/drivers/char/ipmi/ipmi_si_hardcode.c index f6ece7569504..ed5e91b1e040 100644 --- a/drivers/char/ipmi/ipmi_si_hardcode.c +++ b/drivers/char/ipmi/ipmi_si_hardcode.c @@ -32,47 +32,29 @@ static int slave_addrs[SI_MAX_PARMS] __initdata; static unsigned int num_slave_addrs __initdata; module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0); -MODULE_PARM_DESC(type, "Defines the type of each interface, each" - " interface separated by commas. The types are 'kcs'," - " 'smic', and 'bt'. For example si_type=kcs,bt will set" - " the first interface to kcs and the second to bt"); +MODULE_PARM_DESC(type, + "Defines the type of each interface, each interface separated by commas. The types are 'kcs', 'smic', and 'bt'. For example si_type=kcs,bt will set the first interface to kcs and the second to bt"); module_param_hw_array(addrs, ulong, iomem, &num_addrs, 0); -MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the" - " addresses separated by commas. Only use if an interface" - " is in memory. Otherwise, set it to zero or leave" - " it blank."); +MODULE_PARM_DESC(addrs, + "Sets the memory address of each interface, the addresses separated by commas. Only use if an interface is in memory. Otherwise, set it to zero or leave it blank."); module_param_hw_array(ports, uint, ioport, &num_ports, 0); -MODULE_PARM_DESC(ports, "Sets the port address of each interface, the" - " addresses separated by commas. Only use if an interface" - " is a port. Otherwise, set it to zero or leave" - " it blank."); +MODULE_PARM_DESC(ports, + "Sets the port address of each interface, the addresses separated by commas. Only use if an interface is a port. Otherwise, set it to zero or leave it blank."); module_param_hw_array(irqs, int, irq, &num_irqs, 0); -MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the" - " addresses separated by commas. Only use if an interface" - " has an interrupt. Otherwise, set it to zero or leave" - " it blank."); +MODULE_PARM_DESC(irqs, + "Sets the interrupt of each interface, the addresses separated by commas. Only use if an interface has an interrupt. Otherwise, set it to zero or leave it blank."); module_param_hw_array(regspacings, int, other, &num_regspacings, 0); -MODULE_PARM_DESC(regspacings, "The number of bytes between the start address" - " and each successive register used by the interface. For" - " instance, if the start address is 0xca2 and the spacing" - " is 2, then the second address is at 0xca4. Defaults" - " to 1."); +MODULE_PARM_DESC(regspacings, + "The number of bytes between the start address and each successive register used by the interface. For instance, if the start address is 0xca2 and the spacing is 2, then the second address is at 0xca4. Defaults to 1."); module_param_hw_array(regsizes, int, other, &num_regsizes, 0); -MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes." - " This should generally be 1, 2, 4, or 8 for an 8-bit," - " 16-bit, 32-bit, or 64-bit register. Use this if you" - " the 8-bit IPMI register has to be read from a larger" - " register."); +MODULE_PARM_DESC(regsizes, + "The size of the specific IPMI register in bytes. This should generally be 1, 2, 4, or 8 for an 8-bit, 16-bit, 32-bit, or 64-bit register. Use this if you the 8-bit IPMI register has to be read from a larger register."); module_param_hw_array(regshifts, int, other, &num_regshifts, 0); -MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the." - " IPMI register, in bits. For instance, if the data" - " is read from a 32-bit word and the IPMI data is in" - " bit 8-15, then the shift would be 8"); +MODULE_PARM_DESC(regshifts, + "The amount to shift the data read from the. IPMI register, in bits. For instance, if the data is read from a 32-bit word and the IPMI data is in bit 8-15, then the shift would be 8"); module_param_hw_array(slave_addrs, int, other, &num_slave_addrs, 0); -MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" - " the controller. Normally this is 0x20, but can be" - " overridden by this parm. This is an array indexed" - " by interface number."); +MODULE_PARM_DESC(slave_addrs, + "Set the default IPMB slave address for the controller. Normally this is 0x20, but can be overridden by this parm. This is an array indexed by interface number."); static void __init ipmi_hardcode_init_one(const char *si_type_str, unsigned int i, @@ -80,26 +62,21 @@ static void __init ipmi_hardcode_init_one(const char *si_type_str, enum ipmi_addr_space addr_space) { struct ipmi_plat_data p; + int t; memset(&p, 0, sizeof(p)); p.iftype = IPMI_PLAT_IF_SI; - if (!si_type_str || !*si_type_str || strcmp(si_type_str, "kcs") == 0) { + if (!si_type_str || !*si_type_str) { p.type = SI_KCS; - } else if (strcmp(si_type_str, "smic") == 0) { - p.type = SI_SMIC; - } else if (strcmp(si_type_str, "bt") == 0) { - p.type = SI_BT; - } else if (strcmp(si_type_str, "invalid") == 0) { - /* - * Allow a firmware-specified interface to be - * disabled. - */ - p.type = SI_TYPE_INVALID; } else { - pr_warn("Interface type specified for interface %d, was invalid: %s\n", - i, si_type_str); - return; + t = match_string(si_to_str, -1, si_type_str); + if (t < 0) { + pr_warn("Interface type specified for interface %d, was invalid: %s\n", + i, si_type_str); + return; + } + p.type = t; } p.regsize = regsizes[i]; diff --git a/drivers/char/ipmi/ipmi_si_hotmod.c b/drivers/char/ipmi/ipmi_si_hotmod.c index 4fbb4e18bae2..6b12a83ccd4c 100644 --- a/drivers/char/ipmi/ipmi_si_hotmod.c +++ b/drivers/char/ipmi/ipmi_si_hotmod.c @@ -17,9 +17,8 @@ static int hotmod_handler(const char *val, const struct kernel_param *kp); module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200); -MODULE_PARM_DESC(hotmod, "Add and remove interfaces. See" - " Documentation/driver-api/ipmi.rst in the kernel sources for the" - " gory details."); +MODULE_PARM_DESC(hotmod, + "Add and remove interfaces. See Documentation/driver-api/ipmi.rst in the kernel sources for the gory details."); /* * Parms come in as <op1>[:op2[:op3...]]. ops are: @@ -185,24 +184,16 @@ static atomic_t hotmod_nr; static int hotmod_handler(const char *val, const struct kernel_param *kp) { - char *str = kstrdup(val, GFP_KERNEL), *curr, *next; int rv; struct ipmi_plat_data h; - unsigned int len; - int ival; + char *str, *curr, *next; + str = kstrdup(val, GFP_KERNEL); if (!str) return -ENOMEM; /* Kill any trailing spaces, as we can get a "\n" from echo. */ - len = strlen(str); - ival = len - 1; - while ((ival >= 0) && isspace(str[ival])) { - str[ival] = '\0'; - ival--; - } - - for (curr = str; curr; curr = next) { + for (curr = strstrip(str); curr; curr = next) { enum hotmod_op op; next = strchr(curr, ':'); @@ -231,11 +222,10 @@ static int hotmod_handler(const char *val, const struct kernel_param *kp) if (strcmp(pdev->name, "hotmod-ipmi-si") == 0) platform_device_unregister(pdev); } - if (dev) - put_device(dev); + put_device(dev); } } - rv = len; + rv = strlen(val); out: kfree(str); return rv; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 5eac94cf4ff8..62929a3e397e 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -70,7 +70,8 @@ enum si_intf_state { #define IPMI_BT_INTMASK_CLEAR_IRQ_BIT 2 #define IPMI_BT_INTMASK_ENABLE_IRQ_BIT 1 -static const char * const si_to_str[] = { "invalid", "kcs", "smic", "bt" }; +/* 'invalid' to allow a firmware-specified interface to be disabled */ +const char *const si_to_str[] = { "invalid", "kcs", "smic", "bt", NULL }; static bool initialized; @@ -1169,9 +1170,8 @@ static int smi_start_processing(void *send_info, new_smi->thread = kthread_run(ipmi_thread, new_smi, "kipmi%d", new_smi->si_num); if (IS_ERR(new_smi->thread)) { - dev_notice(new_smi->io.dev, "Could not start" - " kernel thread due to error %ld, only using" - " timers to drive the interface\n", + dev_notice(new_smi->io.dev, + "Could not start kernel thread due to error %ld, only using timers to drive the interface\n", PTR_ERR(new_smi->thread)); new_smi->thread = NULL; } @@ -1223,18 +1223,14 @@ static int smi_num; /* Used to sequence the SMIs */ static const char * const addr_space_to_str[] = { "i/o", "mem" }; module_param_array(force_kipmid, int, &num_force_kipmid, 0); -MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or" - " disabled(0). Normally the IPMI driver auto-detects" - " this, but the value may be overridden by this parm."); +MODULE_PARM_DESC(force_kipmid, + "Force the kipmi daemon to be enabled (1) or disabled(0). Normally the IPMI driver auto-detects this, but the value may be overridden by this parm."); module_param(unload_when_empty, bool, 0); -MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are" - " specified or found, default is 1. Setting to 0" - " is useful for hot add of devices using hotmod."); +MODULE_PARM_DESC(unload_when_empty, + "Unload the module if no interfaces are specified or found, default is 1. Setting to 0 is useful for hot add of devices using hotmod."); module_param_array(kipmid_max_busy_us, uint, &num_max_busy_us, 0644); MODULE_PARM_DESC(kipmid_max_busy_us, - "Max time (in microseconds) to busy-wait for IPMI data before" - " sleeping. 0 (default) means to wait forever. Set to 100-500" - " if kipmid is using up a lot of CPU time."); + "Max time (in microseconds) to busy-wait for IPMI data before sleeping. 0 (default) means to wait forever. Set to 100-500 if kipmid is using up a lot of CPU time."); void ipmi_irq_finish_setup(struct si_sm_io *io) { @@ -1270,8 +1266,7 @@ int ipmi_std_irq_setup(struct si_sm_io *io) SI_DEVICE_NAME, io->irq_handler_data); if (rv) { - dev_warn(io->dev, "%s unable to claim interrupt %d," - " running polled\n", + dev_warn(io->dev, "%s unable to claim interrupt %d, running polled\n", SI_DEVICE_NAME, io->irq); io->irq = 0; } else { @@ -1346,10 +1341,8 @@ retry: /* record completion code */ unsigned char cc = *(resp + 2); - if ((cc == IPMI_DEVICE_IN_FW_UPDATE_ERR - || cc == IPMI_DEVICE_IN_INIT_ERR - || cc == IPMI_NOT_IN_MY_STATE_ERR) - && ++retry_count <= GET_DEVICE_ID_MAX_RETRY) { + if (cc != IPMI_CC_NO_ERROR && + ++retry_count <= GET_DEVICE_ID_MAX_RETRY) { dev_warn(smi_info->io.dev, "BMC returned 0x%2.2x, retry get bmc device id\n", cc); @@ -2207,10 +2200,6 @@ static void shutdown_smi(void *send_info) if (smi_info->handlers) smi_info->handlers->cleanup(smi_info->si_sm); - if (smi_info->io.addr_source_cleanup) { - smi_info->io.addr_source_cleanup(&smi_info->io); - smi_info->io.addr_source_cleanup = NULL; - } if (smi_info->io.io_cleanup) { smi_info->io.io_cleanup(&smi_info->io); smi_info->io.io_cleanup = NULL; @@ -2306,5 +2295,4 @@ module_exit(cleanup_ipmi_si); MODULE_ALIAS("platform:dmi-ipmi-si"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); -MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT" - " system interfaces."); +MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces."); diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c index 95bbcfba5408..74fa2055868b 100644 --- a/drivers/char/ipmi/ipmi_si_pci.c +++ b/drivers/char/ipmi/ipmi_si_pci.c @@ -16,18 +16,11 @@ static bool pci_registered; static bool si_trypci = true; module_param_named(trypci, si_trypci, bool, 0); -MODULE_PARM_DESC(trypci, "Setting this to zero will disable the" - " default scan of the interfaces identified via pci"); +MODULE_PARM_DESC(trypci, + "Setting this to zero will disable the default scan of the interfaces identified via pci"); #define PCI_DEVICE_ID_HP_MMC 0x121A -static void ipmi_pci_cleanup(struct si_sm_io *io) -{ - struct pci_dev *pdev = io->addr_source_data; - - pci_disable_device(pdev); -} - static int ipmi_pci_probe_regspacing(struct si_sm_io *io) { if (io->si_type == SI_KCS) { @@ -97,15 +90,12 @@ static int ipmi_pci_probe(struct pci_dev *pdev, return -ENOMEM; } - rv = pci_enable_device(pdev); + rv = pcim_enable_device(pdev); if (rv) { dev_err(&pdev->dev, "couldn't enable PCI device\n"); return rv; } - io.addr_source_cleanup = ipmi_pci_cleanup; - io.addr_source_data = pdev; - if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) { io.addr_space = IPMI_IO_ADDR_SPACE; io.io_setup = ipmi_si_port_setup; @@ -128,11 +118,7 @@ static int ipmi_pci_probe(struct pci_dev *pdev, dev_info(&pdev->dev, "%pR regsize %d spacing %d irq %d\n", &pdev->resource[0], io.regsize, io.regspacing, io.irq); - rv = ipmi_si_add_smi(&io); - if (rv) - pci_disable_device(pdev); - - return rv; + return ipmi_si_add_smi(&io); } static void ipmi_pci_remove(struct pci_dev *pdev) diff --git a/drivers/char/ipmi/ipmi_si_platform.c b/drivers/char/ipmi/ipmi_si_platform.c index 129b5713f187..380a6a542890 100644 --- a/drivers/char/ipmi/ipmi_si_platform.c +++ b/drivers/char/ipmi/ipmi_si_platform.c @@ -34,23 +34,22 @@ static bool si_trydmi = false; #endif module_param_named(tryplatform, si_tryplatform, bool, 0); -MODULE_PARM_DESC(tryplatform, "Setting this to zero will disable the" - " default scan of the interfaces identified via platform" - " interfaces besides ACPI, OpenFirmware, and DMI"); +MODULE_PARM_DESC(tryplatform, + "Setting this to zero will disable the default scan of the interfaces identified via platform interfaces besides ACPI, OpenFirmware, and DMI"); #ifdef CONFIG_ACPI module_param_named(tryacpi, si_tryacpi, bool, 0); -MODULE_PARM_DESC(tryacpi, "Setting this to zero will disable the" - " default scan of the interfaces identified via ACPI"); +MODULE_PARM_DESC(tryacpi, + "Setting this to zero will disable the default scan of the interfaces identified via ACPI"); #endif #ifdef CONFIG_OF module_param_named(tryopenfirmware, si_tryopenfirmware, bool, 0); -MODULE_PARM_DESC(tryopenfirmware, "Setting this to zero will disable the" - " default scan of the interfaces identified via OpenFirmware"); +MODULE_PARM_DESC(tryopenfirmware, + "Setting this to zero will disable the default scan of the interfaces identified via OpenFirmware"); #endif #ifdef CONFIG_DMI module_param_named(trydmi, si_trydmi, bool, 0); -MODULE_PARM_DESC(trydmi, "Setting this to zero will disable the" - " default scan of the interfaces identified via DMI"); +MODULE_PARM_DESC(trydmi, + "Setting this to zero will disable the default scan of the interfaces identified via DMI"); #endif #ifdef CONFIG_ACPI @@ -85,47 +84,46 @@ static int acpi_gpe_irq_setup(struct si_sm_io *io) ACPI_GPE_LEVEL_TRIGGERED, &ipmi_acpi_gpe, io); - if (status != AE_OK) { + if (ACPI_FAILURE(status)) { dev_warn(io->dev, "Unable to claim ACPI GPE %d, running polled\n", io->irq); io->irq = 0; return -EINVAL; - } else { - io->irq_cleanup = acpi_gpe_irq_cleanup; - ipmi_irq_finish_setup(io); - dev_info(io->dev, "Using ACPI GPE %d\n", io->irq); - return 0; } + + io->irq_cleanup = acpi_gpe_irq_cleanup; + ipmi_irq_finish_setup(io); + dev_info(io->dev, "Using ACPI GPE %d\n", io->irq); + return 0; } #endif +static void ipmi_set_addr_data_and_space(struct resource *r, struct si_sm_io *io) +{ + if (resource_type(r) == IORESOURCE_IO) + io->addr_space = IPMI_IO_ADDR_SPACE; + else + io->addr_space = IPMI_MEM_ADDR_SPACE; + io->addr_data = r->start; +} + static struct resource * ipmi_get_info_from_resources(struct platform_device *pdev, struct si_sm_io *io) { struct resource *res, *res_second; - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res) { - io->addr_space = IPMI_IO_ADDR_SPACE; - } else { - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res) - io->addr_space = IPMI_MEM_ADDR_SPACE; - } + res = platform_get_mem_or_io(pdev, 0); if (!res) { dev_err(&pdev->dev, "no I/O or memory address\n"); return NULL; } - io->addr_data = res->start; + ipmi_set_addr_data_and_space(res, io); io->regspacing = DEFAULT_REGSPACING; - res_second = platform_get_resource(pdev, - (io->addr_space == IPMI_IO_ADDR_SPACE) ? - IORESOURCE_IO : IORESOURCE_MEM, - 1); - if (res_second) { + res_second = platform_get_mem_or_io(pdev, 1); + if (res_second && resource_type(res_second) == resource_type(res)) { if (res_second->start > io->addr_data) io->regspacing = res_second->start - io->addr_data; } @@ -275,12 +273,7 @@ static int of_ipmi_probe(struct platform_device *pdev) io.addr_source = SI_DEVICETREE; io.irq_setup = ipmi_std_irq_setup; - if (resource.flags & IORESOURCE_IO) - io.addr_space = IPMI_IO_ADDR_SPACE; - else - io.addr_space = IPMI_MEM_ADDR_SPACE; - - io.addr_data = resource.start; + ipmi_set_addr_data_and_space(&resource, &io); io.regsize = regsize ? be32_to_cpup(regsize) : DEFAULT_REGSIZE; io.regspacing = regspacing ? be32_to_cpup(regspacing) : DEFAULT_REGSPACING; @@ -317,32 +310,31 @@ static int find_slave_address(struct si_sm_io *io, int slave_addr) static int acpi_ipmi_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct si_sm_io io; acpi_handle handle; acpi_status status; unsigned long long tmp; struct resource *res; - int rv = -EINVAL; if (!si_tryacpi) return -ENODEV; - handle = ACPI_HANDLE(&pdev->dev); + handle = ACPI_HANDLE(dev); if (!handle) return -ENODEV; memset(&io, 0, sizeof(io)); io.addr_source = SI_ACPI; - dev_info(&pdev->dev, "probing via ACPI\n"); + dev_info(dev, "probing via ACPI\n"); io.addr_info.acpi_info.acpi_handle = handle; /* _IFT tells us the interface type: KCS, BT, etc */ status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp); if (ACPI_FAILURE(status)) { - dev_err(&pdev->dev, - "Could not find ACPI IPMI interface type\n"); - goto err_free; + dev_err(dev, "Could not find ACPI IPMI interface type\n"); + return -EINVAL; } switch (tmp) { @@ -356,21 +348,19 @@ static int acpi_ipmi_probe(struct platform_device *pdev) io.si_type = SI_BT; break; case 4: /* SSIF, just ignore */ - rv = -ENODEV; - goto err_free; + return -ENODEV; default: - dev_info(&pdev->dev, "unknown IPMI type %lld\n", tmp); - goto err_free; + dev_info(dev, "unknown IPMI type %lld\n", tmp); + return -EINVAL; } + io.dev = dev; io.regsize = DEFAULT_REGSIZE; io.regshift = 0; res = ipmi_get_info_from_resources(pdev, &io); - if (!res) { - rv = -EINVAL; - goto err_free; - } + if (!res) + return -EINVAL; /* If _GPE exists, use it; otherwise use standard interrupts */ status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp); @@ -388,17 +378,12 @@ static int acpi_ipmi_probe(struct platform_device *pdev) io.slave_addr = find_slave_address(&io, io.slave_addr); - io.dev = &pdev->dev; - - dev_info(io.dev, "%pR regsize %d spacing %d irq %d\n", + dev_info(dev, "%pR regsize %d spacing %d irq %d\n", res, io.regsize, io.regspacing, io.irq); request_module("acpi_ipmi"); return ipmi_si_add_smi(&io); - -err_free: - return rv; } static const struct acpi_device_id acpi_ipmi_match[] = { diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index 0416b9c9d410..20d5af92966d 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -510,7 +510,7 @@ static int ipmi_ssif_thread(void *data) return 0; } -static int ssif_i2c_send(struct ssif_info *ssif_info, +static void ssif_i2c_send(struct ssif_info *ssif_info, ssif_i2c_done handler, int read_write, int command, unsigned char *data, unsigned int size) @@ -522,7 +522,6 @@ static int ssif_i2c_send(struct ssif_info *ssif_info, ssif_info->i2c_data = data; ssif_info->i2c_size = size; complete(&ssif_info->wake_thread); - return 0; } @@ -531,22 +530,12 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, static void start_get(struct ssif_info *ssif_info) { - int rv; - ssif_info->rtc_us_timer = 0; ssif_info->multi_pos = 0; - rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, - SSIF_IPMI_RESPONSE, - ssif_info->recv, I2C_SMBUS_BLOCK_DATA); - if (rv < 0) { - /* request failed, just return the error. */ - if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) - dev_dbg(&ssif_info->client->dev, - "Error from i2c_non_blocking_op(5)\n"); - - msg_done_handler(ssif_info, -EIO, NULL, 0); - } + ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, + SSIF_IPMI_RESPONSE, + ssif_info->recv, I2C_SMBUS_BLOCK_DATA); } static void retry_timeout(struct timer_list *t) @@ -620,7 +609,6 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, { struct ipmi_smi_msg *msg; unsigned long oflags, *flags; - int rv; /* * We are single-threaded here, so no need for a lock until we @@ -666,17 +654,10 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, ssif_info->multi_len = len; ssif_info->multi_pos = 1; - rv = ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, - SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, - ssif_info->recv, I2C_SMBUS_BLOCK_DATA); - if (rv < 0) { - if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) - dev_dbg(&ssif_info->client->dev, - "Error from i2c_non_blocking_op(1)\n"); - - result = -EIO; - } else - return; + ssif_i2c_send(ssif_info, msg_done_handler, I2C_SMBUS_READ, + SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, + ssif_info->recv, I2C_SMBUS_BLOCK_DATA); + return; } else if (ssif_info->multi_pos) { /* Middle of multi-part read. Start the next transaction. */ int i; @@ -738,19 +719,12 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, ssif_info->multi_pos++; - rv = ssif_i2c_send(ssif_info, msg_done_handler, - I2C_SMBUS_READ, - SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, - ssif_info->recv, - I2C_SMBUS_BLOCK_DATA); - if (rv < 0) { - if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) - dev_dbg(&ssif_info->client->dev, - "Error from ssif_i2c_send\n"); - - result = -EIO; - } else - return; + ssif_i2c_send(ssif_info, msg_done_handler, + I2C_SMBUS_READ, + SSIF_IPMI_MULTI_PART_RESPONSE_MIDDLE, + ssif_info->recv, + I2C_SMBUS_BLOCK_DATA); + return; } } @@ -908,8 +882,6 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, static void msg_written_handler(struct ssif_info *ssif_info, int result, unsigned char *data, unsigned int len) { - int rv; - /* We are single-threaded here, so no need for a lock. */ if (result < 0) { ssif_info->retries_left--; @@ -972,18 +944,9 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result, ssif_info->multi_data = NULL; } - rv = ssif_i2c_send(ssif_info, msg_written_handler, - I2C_SMBUS_WRITE, cmd, - data_to_send, I2C_SMBUS_BLOCK_DATA); - if (rv < 0) { - /* request failed, just return the error. */ - ssif_inc_stat(ssif_info, send_errors); - - if (ssif_info->ssif_debug & SSIF_DEBUG_MSG) - dev_dbg(&ssif_info->client->dev, - "Error from i2c_non_blocking_op(3)\n"); - msg_done_handler(ssif_info, -EIO, NULL, 0); - } + ssif_i2c_send(ssif_info, msg_written_handler, + I2C_SMBUS_WRITE, cmd, + data_to_send, I2C_SMBUS_BLOCK_DATA); } else { /* Ready to request the result. */ unsigned long oflags, *flags; @@ -1012,7 +975,6 @@ static void msg_written_handler(struct ssif_info *ssif_info, int result, static int start_resend(struct ssif_info *ssif_info) { - int rv; int command; ssif_info->got_alert = false; @@ -1034,12 +996,9 @@ static int start_resend(struct ssif_info *ssif_info) ssif_info->data[0] = ssif_info->data_len; } - rv = ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE, - command, ssif_info->data, I2C_SMBUS_BLOCK_DATA); - if (rv && (ssif_info->ssif_debug & SSIF_DEBUG_MSG)) - dev_dbg(&ssif_info->client->dev, - "Error from i2c_non_blocking_op(4)\n"); - return rv; + ssif_i2c_send(ssif_info, msg_written_handler, I2C_SMBUS_WRITE, + command, ssif_info->data, I2C_SMBUS_BLOCK_DATA); + return 0; } static int start_send(struct ssif_info *ssif_info, |