summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml5
-rw-r--r--drivers/watchdog/Kconfig2
-rw-r--r--drivers/watchdog/aspeed_wdt.c7
-rw-r--r--drivers/watchdog/imx2_wdt.c27
-rw-r--r--drivers/watchdog/ixp4xx_wdt.c14
-rw-r--r--drivers/watchdog/orion_wdt.c13
-rw-r--r--drivers/watchdog/renesas_wdt.c1
-rw-r--r--drivers/watchdog/rti_wdt.c1
-rw-r--r--drivers/watchdog/sp5100_tco.c334
-rw-r--r--drivers/watchdog/sp5100_tco.h7
-rw-r--r--drivers/watchdog/watchdog_dev.c244
11 files changed, 409 insertions, 246 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
index 91a98ccd4226..d060438e1402 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
@@ -55,6 +55,11 @@ properties:
- renesas,r8a779a0-wdt # R-Car V3U
- const: renesas,rcar-gen3-wdt # R-Car Gen3 and RZ/G2
+ - items:
+ - enum:
+ - renesas,r8a779f0-wdt # R-Car S4-8
+ - const: renesas,rcar-gen4-wdt # R-Car Gen4
+
reg:
maxItems: 1
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 085f5a4ad06c..c4e82a8d863f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1779,7 +1779,7 @@ config BCM7038_WDT
tristate "BCM63xx/BCM7038 Watchdog"
select WATCHDOG_CORE
depends on HAS_IOMEM
- depends on ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
+ depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
help
Watchdog driver for the built-in hardware in Broadcom 7038 and
later SoCs used in set-top boxes. BCM7038 was made public
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index 436571b6fc79..bd06622813eb 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -13,6 +13,11 @@
#include <linux/platform_device.h>
#include <linux/watchdog.h>
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
struct aspeed_wdt {
struct watchdog_device wdd;
void __iomem *base;
@@ -266,6 +271,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT;
watchdog_init_timeout(&wdt->wdd, 0, dev);
+ watchdog_set_nowayout(&wdt->wdd, nowayout);
+
np = dev->of_node;
ofdid = of_match_node(aspeed_wdt_of_table, np);
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 51bfb796898b..d0c5d47ddede 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -66,6 +66,7 @@ struct imx2_wdt_device {
struct watchdog_device wdog;
bool ext_reset;
bool clk_is_on;
+ bool no_ping;
};
static bool nowayout = WATCHDOG_NOWAYOUT;
@@ -312,12 +313,18 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
wdev->ext_reset = of_property_read_bool(dev->of_node,
"fsl,ext-reset-output");
+ /*
+ * The i.MX7D doesn't support low power mode, so we need to ping the watchdog
+ * during suspend.
+ */
+ wdev->no_ping = !of_device_is_compatible(dev->of_node, "fsl,imx7d-wdt");
platform_set_drvdata(pdev, wdog);
watchdog_set_drvdata(wdog, wdev);
watchdog_set_nowayout(wdog, nowayout);
watchdog_set_restart_priority(wdog, 128);
watchdog_init_timeout(wdog, timeout, dev);
- watchdog_stop_ping_on_suspend(wdog);
+ if (wdev->no_ping)
+ watchdog_stop_ping_on_suspend(wdog);
if (imx2_wdt_is_running(wdev)) {
imx2_wdt_set_timeout(wdog, wdog->timeout);
@@ -366,9 +373,11 @@ static int __maybe_unused imx2_wdt_suspend(struct device *dev)
imx2_wdt_ping(wdog);
}
- clk_disable_unprepare(wdev->clk);
+ if (wdev->no_ping) {
+ clk_disable_unprepare(wdev->clk);
- wdev->clk_is_on = false;
+ wdev->clk_is_on = false;
+ }
return 0;
}
@@ -380,11 +389,14 @@ static int __maybe_unused imx2_wdt_resume(struct device *dev)
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
int ret;
- ret = clk_prepare_enable(wdev->clk);
- if (ret)
- return ret;
+ if (wdev->no_ping) {
+ ret = clk_prepare_enable(wdev->clk);
- wdev->clk_is_on = true;
+ if (ret)
+ return ret;
+
+ wdev->clk_is_on = true;
+ }
if (watchdog_active(wdog) && !imx2_wdt_is_running(wdev)) {
/*
@@ -407,6 +419,7 @@ static SIMPLE_DEV_PM_OPS(imx2_wdt_pm_ops, imx2_wdt_suspend,
static const struct of_device_id imx2_wdt_dt_ids[] = {
{ .compatible = "fsl,imx21-wdt", },
+ { .compatible = "fsl,imx7d-wdt", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx2_wdt_dt_ids);
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index 31b03fa71341..281a48d9889f 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -84,10 +84,24 @@ static int ixp4xx_wdt_set_timeout(struct watchdog_device *wdd,
return 0;
}
+static int ixp4xx_wdt_restart(struct watchdog_device *wdd,
+ unsigned long action, void *data)
+{
+ struct ixp4xx_wdt *iwdt = to_ixp4xx_wdt(wdd);
+
+ __raw_writel(IXP4XX_WDT_KEY, iwdt->base + IXP4XX_OSWK_OFFSET);
+ __raw_writel(0, iwdt->base + IXP4XX_OSWT_OFFSET);
+ __raw_writel(IXP4XX_WDT_COUNT_ENABLE | IXP4XX_WDT_RESET_ENABLE,
+ iwdt->base + IXP4XX_OSWE_OFFSET);
+
+ return 0;
+}
+
static const struct watchdog_ops ixp4xx_wdt_ops = {
.start = ixp4xx_wdt_start,
.stop = ixp4xx_wdt_stop,
.set_timeout = ixp4xx_wdt_set_timeout,
+ .restart = ixp4xx_wdt_restart,
.owner = THIS_MODULE,
};
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 127eefc9161d..e25e6bf4647f 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -238,8 +238,10 @@ static int armada370_start(struct watchdog_device *wdt_dev)
atomic_io_modify(dev->reg + TIMER_A370_STATUS, WDT_A370_EXPIRED, 0);
/* Enable watchdog timer */
- atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit,
- dev->data->wdt_enable_bit);
+ reg = dev->data->wdt_enable_bit;
+ if (dev->wdt.info->options & WDIOF_PRETIMEOUT)
+ reg |= TIMER1_ENABLE_BIT;
+ atomic_io_modify(dev->reg + TIMER_CTRL, reg, reg);
/* Enable reset on watchdog */
reg = readl(dev->rstout);
@@ -312,7 +314,7 @@ static int armada375_stop(struct watchdog_device *wdt_dev)
static int armada370_stop(struct watchdog_device *wdt_dev)
{
struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
- u32 reg;
+ u32 reg, mask;
/* Disable reset on watchdog */
reg = readl(dev->rstout);
@@ -320,7 +322,10 @@ static int armada370_stop(struct watchdog_device *wdt_dev)
writel(reg, dev->rstout);
/* Disable watchdog timer */
- atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0);
+ mask = dev->data->wdt_enable_bit;
+ if (wdt_dev->info->options & WDIOF_PRETIMEOUT)
+ mask |= TIMER1_ENABLE_BIT;
+ atomic_io_modify(dev->reg + TIMER_CTRL, mask, 0);
return 0;
}
diff --git a/drivers/watchdog/renesas_wdt.c b/drivers/watchdog/renesas_wdt.c
index 5791198960e6..41d58ea5eb2f 100644
--- a/drivers/watchdog/renesas_wdt.c
+++ b/drivers/watchdog/renesas_wdt.c
@@ -327,6 +327,7 @@ static SIMPLE_DEV_PM_OPS(rwdt_pm_ops, rwdt_suspend, rwdt_resume);
static const struct of_device_id rwdt_ids[] = {
{ .compatible = "renesas,rcar-gen2-wdt", },
{ .compatible = "renesas,rcar-gen3-wdt", },
+ { .compatible = "renesas,rcar-gen4-wdt", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, rwdt_ids);
diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index 117bc2a8eb0a..db843f825860 100644
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -228,6 +228,7 @@ static int rti_wdt_probe(struct platform_device *pdev)
ret = pm_runtime_get_sync(dev);
if (ret) {
pm_runtime_put_noidle(dev);
+ pm_runtime_disable(&pdev->dev);
return dev_err_probe(dev, ret, "runtime pm failed\n");
}
diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index dd9a744f82f8..86ffb58fbc85 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -49,7 +49,7 @@
/* internal variables */
enum tco_reg_layout {
- sp5100, sb800, efch
+ sp5100, sb800, efch, efch_mmio
};
struct sp5100_tco {
@@ -87,6 +87,10 @@ static enum tco_reg_layout tco_reg_layout(struct pci_dev *dev)
dev->revision < 0x40) {
return sp5100;
} else if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ sp5100_tco_pci->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
+ sp5100_tco_pci->revision >= AMD_ZEN_SMBUS_PCI_REV) {
+ return efch_mmio;
+ } else if (dev->vendor == PCI_VENDOR_ID_AMD &&
((dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
dev->revision >= 0x41) ||
(dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
@@ -209,6 +213,8 @@ static void tco_timer_enable(struct sp5100_tco *tco)
~EFCH_PM_WATCHDOG_DISABLE,
EFCH_PM_DECODEEN_SECOND_RES);
break;
+ default:
+ break;
}
}
@@ -223,14 +229,195 @@ static u32 sp5100_tco_read_pm_reg32(u8 index)
return val;
}
+static u32 sp5100_tco_request_region(struct device *dev,
+ u32 mmio_addr,
+ const char *dev_name)
+{
+ if (!devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
+ dev_name)) {
+ dev_dbg(dev, "MMIO address 0x%08x already in use\n", mmio_addr);
+ return 0;
+ }
+
+ return mmio_addr;
+}
+
+static u32 sp5100_tco_prepare_base(struct sp5100_tco *tco,
+ u32 mmio_addr,
+ u32 alt_mmio_addr,
+ const char *dev_name)
+{
+ struct device *dev = tco->wdd.parent;
+
+ dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n", mmio_addr);
+
+ if (!mmio_addr && !alt_mmio_addr)
+ return -ENODEV;
+
+ /* Check for MMIO address and alternate MMIO address conflicts */
+ if (mmio_addr)
+ mmio_addr = sp5100_tco_request_region(dev, mmio_addr, dev_name);
+
+ if (!mmio_addr && alt_mmio_addr)
+ mmio_addr = sp5100_tco_request_region(dev, alt_mmio_addr, dev_name);
+
+ if (!mmio_addr) {
+ dev_err(dev, "Failed to reserve MMIO or alternate MMIO region\n");
+ return -EBUSY;
+ }
+
+ tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
+ if (!tco->tcobase) {
+ dev_err(dev, "MMIO address 0x%08x failed mapping\n", mmio_addr);
+ devm_release_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
+ return -ENOMEM;
+ }
+
+ dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
+
+ return 0;
+}
+
+static int sp5100_tco_timer_init(struct sp5100_tco *tco)
+{
+ struct watchdog_device *wdd = &tco->wdd;
+ struct device *dev = wdd->parent;
+ u32 val;
+
+ val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+ if (val & SP5100_WDT_DISABLED) {
+ dev_err(dev, "Watchdog hardware is disabled\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Save WatchDogFired status, because WatchDogFired flag is
+ * cleared here.
+ */
+ if (val & SP5100_WDT_FIRED)
+ wdd->bootstatus = WDIOF_CARDRESET;
+
+ /* Set watchdog action to reset the system */
+ val &= ~SP5100_WDT_ACTION_RESET;
+ writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+ /* Set a reasonable heartbeat before we stop the timer */
+ tco_timer_set_timeout(wdd, wdd->timeout);
+
+ /*
+ * Stop the TCO before we change anything so we don't race with
+ * a zeroed timer.
+ */
+ tco_timer_stop(wdd);
+
+ return 0;
+}
+
+static u8 efch_read_pm_reg8(void __iomem *addr, u8 index)
+{
+ return readb(addr + index);
+}
+
+static void efch_update_pm_reg8(void __iomem *addr, u8 index, u8 reset, u8 set)
+{
+ u8 val;
+
+ val = readb(addr + index);
+ val &= reset;
+ val |= set;
+ writeb(val, addr + index);
+}
+
+static void tco_timer_enable_mmio(void __iomem *addr)
+{
+ efch_update_pm_reg8(addr, EFCH_PM_DECODEEN3,
+ ~EFCH_PM_WATCHDOG_DISABLE,
+ EFCH_PM_DECODEEN_SECOND_RES);
+}
+
+static int sp5100_tco_setupdevice_mmio(struct device *dev,
+ struct watchdog_device *wdd)
+{
+ struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
+ const char *dev_name = SB800_DEVNAME;
+ u32 mmio_addr = 0, alt_mmio_addr = 0;
+ struct resource *res;
+ void __iomem *addr;
+ int ret;
+ u32 val;
+
+ res = request_mem_region_muxed(EFCH_PM_ACPI_MMIO_PM_ADDR,
+ EFCH_PM_ACPI_MMIO_PM_SIZE,
+ "sp5100_tco");
+
+ if (!res) {
+ dev_err(dev,
+ "Memory region 0x%08x already in use\n",
+ EFCH_PM_ACPI_MMIO_PM_ADDR);
+ return -EBUSY;
+ }
+
+ addr = ioremap(EFCH_PM_ACPI_MMIO_PM_ADDR, EFCH_PM_ACPI_MMIO_PM_SIZE);
+ if (!addr) {
+ dev_err(dev, "Address mapping failed\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * EFCH_PM_DECODEEN_WDT_TMREN is dual purpose. This bitfield
+ * enables sp5100_tco register MMIO space decoding. The bitfield
+ * also starts the timer operation. Enable if not already enabled.
+ */
+ val = efch_read_pm_reg8(addr, EFCH_PM_DECODEEN);
+ if (!(val & EFCH_PM_DECODEEN_WDT_TMREN)) {
+ efch_update_pm_reg8(addr, EFCH_PM_DECODEEN, 0xff,
+ EFCH_PM_DECODEEN_WDT_TMREN);
+ }
+
+ /* Error if the timer could not be enabled */
+ val = efch_read_pm_reg8(addr, EFCH_PM_DECODEEN);
+ if (!(val & EFCH_PM_DECODEEN_WDT_TMREN)) {
+ dev_err(dev, "Failed to enable the timer\n");
+ ret = -EFAULT;
+ goto out;
+ }
+
+ mmio_addr = EFCH_PM_WDT_ADDR;
+
+ /* Determine alternate MMIO base address */
+ val = efch_read_pm_reg8(addr, EFCH_PM_ISACONTROL);
+ if (val & EFCH_PM_ISACONTROL_MMIOEN)
+ alt_mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
+ EFCH_PM_ACPI_MMIO_WDT_OFFSET;
+
+ ret = sp5100_tco_prepare_base(tco, mmio_addr, alt_mmio_addr, dev_name);
+ if (!ret) {
+ tco_timer_enable_mmio(addr);
+ ret = sp5100_tco_timer_init(tco);
+ }
+
+out:
+ if (addr)
+ iounmap(addr);
+
+ release_resource(res);
+
+ return ret;
+}
+
static int sp5100_tco_setupdevice(struct device *dev,
struct watchdog_device *wdd)
{
struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
const char *dev_name;
u32 mmio_addr = 0, val;
+ u32 alt_mmio_addr = 0;
int ret;
+ if (tco->tco_reg_layout == efch_mmio)
+ return sp5100_tco_setupdevice_mmio(dev, wdd);
+
/* Request the IO ports used by this driver */
if (!request_muxed_region(SP5100_IO_PM_INDEX_REG,
SP5100_PM_IOPORTS_SIZE, "sp5100_tco")) {
@@ -247,138 +434,55 @@ static int sp5100_tco_setupdevice(struct device *dev,
dev_name = SP5100_DEVNAME;
mmio_addr = sp5100_tco_read_pm_reg32(SP5100_PM_WATCHDOG_BASE) &
0xfffffff8;
+
+ /*
+ * Secondly, find the watchdog timer MMIO address
+ * from SBResource_MMIO register.
+ */
+
+ /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
+ pci_read_config_dword(sp5100_tco_pci,
+ SP5100_SB_RESOURCE_MMIO_BASE,
+ &val);
+
+ /* Verify MMIO is enabled and using bar0 */
+ if ((val & SB800_ACPI_MMIO_MASK) == SB800_ACPI_MMIO_DECODE_EN)
+ alt_mmio_addr = (val & ~0xfff) + SB800_PM_WDT_MMIO_OFFSET;
break;
case sb800:
dev_name = SB800_DEVNAME;
mmio_addr = sp5100_tco_read_pm_reg32(SB800_PM_WATCHDOG_BASE) &
0xfffffff8;
+
+ /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
+ val = sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
+
+ /* Verify MMIO is enabled and using bar0 */
+ if ((val & SB800_ACPI_MMIO_MASK) == SB800_ACPI_MMIO_DECODE_EN)
+ alt_mmio_addr = (val & ~0xfff) + SB800_PM_WDT_MMIO_OFFSET;
break;
case efch:
dev_name = SB800_DEVNAME;
- /*
- * On Family 17h devices, the EFCH_PM_DECODEEN_WDT_TMREN bit of
- * EFCH_PM_DECODEEN not only enables the EFCH_PM_WDT_ADDR memory
- * region, it also enables the watchdog itself.
- */
- if (boot_cpu_data.x86 == 0x17) {
- val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
- if (!(val & EFCH_PM_DECODEEN_WDT_TMREN)) {
- sp5100_tco_update_pm_reg8(EFCH_PM_DECODEEN, 0xff,
- EFCH_PM_DECODEEN_WDT_TMREN);
- }
- }
val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
if (val & EFCH_PM_DECODEEN_WDT_TMREN)
mmio_addr = EFCH_PM_WDT_ADDR;
+
+ val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
+ if (val & EFCH_PM_ISACONTROL_MMIOEN)
+ alt_mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
+ EFCH_PM_ACPI_MMIO_WDT_OFFSET;
break;
default:
return -ENODEV;
}
- /* Check MMIO address conflict */
- if (!mmio_addr ||
- !devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
- dev_name)) {
- if (mmio_addr)
- dev_dbg(dev, "MMIO address 0x%08x already in use\n",
- mmio_addr);
- switch (tco->tco_reg_layout) {
- case sp5100:
- /*
- * Secondly, Find the watchdog timer MMIO address
- * from SBResource_MMIO register.
- */
- /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
- pci_read_config_dword(sp5100_tco_pci,
- SP5100_SB_RESOURCE_MMIO_BASE,
- &mmio_addr);
- if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
- SB800_ACPI_MMIO_SEL)) !=
- SB800_ACPI_MMIO_DECODE_EN) {
- ret = -ENODEV;
- goto unreg_region;
- }
- mmio_addr &= ~0xFFF;
- mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
- break;
- case sb800:
- /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
- mmio_addr =
- sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
- if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
- SB800_ACPI_MMIO_SEL)) !=
- SB800_ACPI_MMIO_DECODE_EN) {
- ret = -ENODEV;
- goto unreg_region;
- }
- mmio_addr &= ~0xFFF;
- mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
- break;
- case efch:
- val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
- if (!(val & EFCH_PM_ISACONTROL_MMIOEN)) {
- ret = -ENODEV;
- goto unreg_region;
- }
- mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
- EFCH_PM_ACPI_MMIO_WDT_OFFSET;
- break;
- }
- dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n",
- mmio_addr);
- if (!devm_request_mem_region(dev, mmio_addr,
- SP5100_WDT_MEM_MAP_SIZE,
- dev_name)) {
- dev_dbg(dev, "MMIO address 0x%08x already in use\n",
- mmio_addr);
- ret = -EBUSY;
- goto unreg_region;
- }
- }
-
- tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
- if (!tco->tcobase) {
- dev_err(dev, "failed to get tcobase address\n");
- ret = -ENOMEM;
- goto unreg_region;
- }
-
- dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
-
- /* Setup the watchdog timer */
- tco_timer_enable(tco);
-
- val = readl(SP5100_WDT_CONTROL(tco->tcobase));
- if (val & SP5100_WDT_DISABLED) {
- dev_err(dev, "Watchdog hardware is disabled\n");
- ret = -ENODEV;
- goto unreg_region;
+ ret = sp5100_tco_prepare_base(tco, mmio_addr, alt_mmio_addr, dev_name);
+ if (!ret) {
+ /* Setup the watchdog timer */
+ tco_timer_enable(tco);
+ ret = sp5100_tco_timer_init(tco);
}
- /*
- * Save WatchDogFired status, because WatchDogFired flag is
- * cleared here.
- */
- if (val & SP5100_WDT_FIRED)
- wdd->bootstatus = WDIOF_CARDRESET;
- /* Set watchdog action to reset the system */
- val &= ~SP5100_WDT_ACTION_RESET;
- writel(val, SP5100_WDT_CONTROL(tco->tcobase));
-
- /* Set a reasonable heartbeat before we stop the timer */
- tco_timer_set_timeout(wdd, wdd->timeout);
-
- /*
- * Stop the TCO before we change anything so we don't race with
- * a zeroed timer.
- */
- tco_timer_stop(wdd);
-
- release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
-
- return 0;
-
-unreg_region:
release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
return ret;
}
diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h
index adf015aa4126..6a0986d2c94b 100644
--- a/drivers/watchdog/sp5100_tco.h
+++ b/drivers/watchdog/sp5100_tco.h
@@ -58,6 +58,7 @@
#define SB800_PM_WATCHDOG_SECOND_RES GENMASK(1, 0)
#define SB800_ACPI_MMIO_DECODE_EN BIT(0)
#define SB800_ACPI_MMIO_SEL BIT(1)
+#define SB800_ACPI_MMIO_MASK GENMASK(1, 0)
#define SB800_PM_WDT_MMIO_OFFSET 0xB00
@@ -82,4 +83,10 @@
#define EFCH_PM_ISACONTROL_MMIOEN BIT(1)
#define EFCH_PM_ACPI_MMIO_ADDR 0xfed80000
+#define EFCH_PM_ACPI_MMIO_PM_OFFSET 0x00000300
#define EFCH_PM_ACPI_MMIO_WDT_OFFSET 0x00000b00
+
+#define EFCH_PM_ACPI_MMIO_PM_ADDR (EFCH_PM_ACPI_MMIO_ADDR + \
+ EFCH_PM_ACPI_MMIO_PM_OFFSET)
+#define EFCH_PM_ACPI_MMIO_PM_SIZE 8
+#define AMD_ZEN_SMBUS_PCI_REV 0x51
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index 3a3d8b5c7ad5..54903f3c851e 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -171,17 +171,17 @@ static int __watchdog_ping(struct watchdog_device *wdd)
}
/*
- * watchdog_ping: ping the watchdog.
- * @wdd: the watchdog device to ping
+ * watchdog_ping - ping the watchdog
+ * @wdd: The watchdog device to ping
*
- * The caller must hold wd_data->lock.
+ * If the watchdog has no own ping operation then it needs to be
+ * restarted via the start operation. This wrapper function does
+ * exactly that.
+ * We only ping when the watchdog device is running.
+ * The caller must hold wd_data->lock.
*
- * If the watchdog has no own ping operation then it needs to be
- * restarted via the start operation. This wrapper function does
- * exactly that.
- * We only ping when the watchdog device is running.
+ * Return: 0 on success, error otherwise.
*/
-
static int watchdog_ping(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
@@ -231,16 +231,14 @@ static enum hrtimer_restart watchdog_timer_expired(struct hrtimer *timer)
}
/*
- * watchdog_start: wrapper to start the watchdog.
- * @wdd: the watchdog device to start
+ * watchdog_start - wrapper to start the watchdog
+ * @wdd: The watchdog device to start
*
- * The caller must hold wd_data->lock.
+ * Start the watchdog if it is not active and mark it active.
+ * The caller must hold wd_data->lock.
*
- * Start the watchdog if it is not active and mark it active.
- * This function returns zero on success or a negative errno code for
- * failure.
+ * Return: 0 on success or a negative errno code for failure.
*/
-
static int watchdog_start(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
@@ -274,17 +272,15 @@ static int watchdog_start(struct watchdog_device *wdd)
}
/*
- * watchdog_stop: wrapper to stop the watchdog.
- * @wdd: the watchdog device to stop
+ * watchdog_stop - wrapper to stop the watchdog
+ * @wdd: The watchdog device to stop
*
- * The caller must hold wd_data->lock.
+ * Stop the watchdog if it is still active and unmark it active.
+ * If the 'nowayout' feature was set, the watchdog cannot be stopped.
+ * The caller must hold wd_data->lock.
*
- * Stop the watchdog if it is still active and unmark it active.
- * This function returns zero on success or a negative errno code for
- * failure.
- * If the 'nowayout' feature was set, the watchdog cannot be stopped.
+ * Return: 0 on success or a negative errno code for failure.
*/
-
static int watchdog_stop(struct watchdog_device *wdd)
{
int err = 0;
@@ -315,14 +311,14 @@ static int watchdog_stop(struct watchdog_device *wdd)
}
/*
- * watchdog_get_status: wrapper to get the watchdog status
- * @wdd: the watchdog device to get the status from
+ * watchdog_get_status - wrapper to get the watchdog status
+ * @wdd: The watchdog device to get the status from
*
- * The caller must hold wd_data->lock.
+ * Get the watchdog's status flags.
+ * The caller must hold wd_data->lock.
*
- * Get the watchdog's status flags.
+ * Return: watchdog's status flags.
*/
-
static unsigned int watchdog_get_status(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
@@ -352,13 +348,14 @@ static unsigned int watchdog_get_status(struct watchdog_device *wdd)
}
/*
- * watchdog_set_timeout: set the watchdog timer timeout
- * @wdd: the watchdog device to set the timeout for
- * @timeout: timeout to set in seconds
+ * watchdog_set_timeout - set the watchdog timer timeout
+ * @wdd: The watchdog device to set the timeout for
+ * @timeout: Timeout to set in seconds
+ *
+ * The caller must hold wd_data->lock.
*
- * The caller must hold wd_data->lock.
+ * Return: 0 if successful, error otherwise.
*/
-
static int watchdog_set_timeout(struct watchdog_device *wdd,
unsigned int timeout)
{
@@ -385,11 +382,12 @@ static int watchdog_set_timeout(struct watchdog_device *wdd,
}
/*
- * watchdog_set_pretimeout: set the watchdog timer pretimeout
- * @wdd: the watchdog device to set the timeout for
- * @timeout: pretimeout to set in seconds
+ * watchdog_set_pretimeout - set the watchdog timer pretimeout
+ * @wdd: The watchdog device to set the timeout for
+ * @timeout: pretimeout to set in seconds
+ *
+ * Return: 0 if successful, error otherwise.
*/
-
static int watchdog_set_pretimeout(struct watchdog_device *wdd,
unsigned int timeout)
{
@@ -410,15 +408,15 @@ static int watchdog_set_pretimeout(struct watchdog_device *wdd,
}
/*
- * watchdog_get_timeleft: wrapper to get the time left before a reboot
- * @wdd: the watchdog device to get the remaining time from
- * @timeleft: the time that's left
+ * watchdog_get_timeleft - wrapper to get the time left before a reboot
+ * @wdd: The watchdog device to get the remaining time from
+ * @timeleft: The time that's left
*
- * The caller must hold wd_data->lock.
+ * Get the time before a watchdog will reboot (if not pinged).
+ * The caller must hold wd_data->lock.
*
- * Get the time before a watchdog will reboot (if not pinged).
+ * Return: 0 if successful, error otherwise.
*/
-
static int watchdog_get_timeleft(struct watchdog_device *wdd,
unsigned int *timeleft)
{
@@ -635,14 +633,15 @@ __ATTRIBUTE_GROUPS(wdt);
#endif
/*
- * watchdog_ioctl_op: call the watchdog drivers ioctl op if defined
- * @wdd: the watchdog device to do the ioctl on
- * @cmd: watchdog command
- * @arg: argument pointer
+ * watchdog_ioctl_op - call the watchdog drivers ioctl op if defined
+ * @wdd: The watchdog device to do the ioctl on
+ * @cmd: Watchdog command
+ * @arg: Argument pointer
*
- * The caller must hold wd_data->lock.
+ * The caller must hold wd_data->lock.
+ *
+ * Return: 0 if successful, error otherwise.
*/
-
static int watchdog_ioctl_op(struct watchdog_device *wdd, unsigned int cmd,
unsigned long arg)
{
@@ -653,17 +652,18 @@ static int watchdog_ioctl_op(struct watchdog_device *wdd, unsigned int cmd,
}
/*
- * watchdog_write: writes to the watchdog.
- * @file: file from VFS
- * @data: user address of data
- * @len: length of data
- * @ppos: pointer to the file offset
+ * watchdog_write - writes to the watchdog
+ * @file: File from VFS
+ * @data: User address of data
+ * @len: Length of data
+ * @ppos: Pointer to the file offset
*
- * A write to a watchdog device is defined as a keepalive ping.
- * Writing the magic 'V' sequence allows the next close to turn
- * off the watchdog (if 'nowayout' is not set).
+ * A write to a watchdog device is defined as a keepalive ping.
+ * Writing the magic 'V' sequence allows the next close to turn
+ * off the watchdog (if 'nowayout' is not set).
+ *
+ * Return: @len if successful, error otherwise.
*/
-
static ssize_t watchdog_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
@@ -706,13 +706,15 @@ static ssize_t watchdog_write(struct file *file, const char __user *data,
}
/*
- * watchdog_ioctl: handle the different ioctl's for the watchdog device.
- * @file: file handle to the device
- * @cmd: watchdog command
- * @arg: argument pointer
+ * watchdog_ioctl - handle the different ioctl's for the watchdog device
+ * @file: File handle to the device
+ * @cmd: Watchdog command
+ * @arg: Argument pointer
*
- * The watchdog API defines a common set of functions for all watchdogs
- * according to their available features.
+ * The watchdog API defines a common set of functions for all watchdogs
+ * according to their available features.
+ *
+ * Return: 0 if successful, error otherwise.
*/
static long watchdog_ioctl(struct file *file, unsigned int cmd,
@@ -819,15 +821,16 @@ out_ioctl:
}
/*
- * watchdog_open: open the /dev/watchdog* devices.
- * @inode: inode of device
- * @file: file handle to device
+ * watchdog_open - open the /dev/watchdog* devices
+ * @inode: Inode of device
+ * @file: File handle to device
+ *
+ * When the /dev/watchdog* device gets opened, we start the watchdog.
+ * Watch out: the /dev/watchdog device is single open, so we make sure
+ * it can only be opened once.
*
- * When the /dev/watchdog* device gets opened, we start the watchdog.
- * Watch out: the /dev/watchdog device is single open, so we make sure
- * it can only be opened once.
+ * Return: 0 if successful, error otherwise.
*/
-
static int watchdog_open(struct inode *inode, struct file *file)
{
struct watchdog_core_data *wd_data;
@@ -896,15 +899,16 @@ static void watchdog_core_data_release(struct device *dev)
}
/*
- * watchdog_release: release the watchdog device.
- * @inode: inode of device
- * @file: file handle to device
+ * watchdog_release - release the watchdog device
+ * @inode: Inode of device
+ * @file: File handle to device
+ *
+ * This is the code for when /dev/watchdog gets closed. We will only
+ * stop the watchdog when we have received the magic char (and nowayout
+ * was not set), else the watchdog will keep running.
*
- * This is the code for when /dev/watchdog gets closed. We will only
- * stop the watchdog when we have received the magic char (and nowayout
- * was not set), else the watchdog will keep running.
+ * Always returns 0.
*/
-
static int watchdog_release(struct inode *inode, struct file *file)
{
struct watchdog_core_data *wd_data = file->private_data;
@@ -977,14 +981,15 @@ static struct class watchdog_class = {
};
/*
- * watchdog_cdev_register: register watchdog character device
- * @wdd: watchdog device
+ * watchdog_cdev_register - register watchdog character device
+ * @wdd: Watchdog device
+ *
+ * Register a watchdog character device including handling the legacy
+ * /dev/watchdog node. /dev/watchdog is actually a miscdevice and
+ * thus we set it up like that.
*
- * Register a watchdog character device including handling the legacy
- * /dev/watchdog node. /dev/watchdog is actually a miscdevice and
- * thus we set it up like that.
+ * Return: 0 if successful, error otherwise.
*/
-
static int watchdog_cdev_register(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data;
@@ -1074,13 +1079,12 @@ static int watchdog_cdev_register(struct watchdog_device *wdd)
}
/*
- * watchdog_cdev_unregister: unregister watchdog character device
- * @watchdog: watchdog device
+ * watchdog_cdev_unregister - unregister watchdog character device
+ * @wdd: Watchdog device
*
- * Unregister watchdog character device and if needed the legacy
- * /dev/watchdog device.
+ * Unregister watchdog character device and if needed the legacy
+ * /dev/watchdog device.
*/
-
static void watchdog_cdev_unregister(struct watchdog_device *wdd)
{
struct watchdog_core_data *wd_data = wdd->wd_data;
@@ -1109,15 +1113,16 @@ static void watchdog_cdev_unregister(struct watchdog_device *wdd)
put_device(&wd_data->dev);
}
-/*
- * watchdog_dev_register: register a watchdog device
- * @wdd: watchdog device
+/**
+ * watchdog_dev_register - register a watchdog device
+ * @wdd: Watchdog device
+ *
+ * Register a watchdog device including handling the legacy
+ * /dev/watchdog node. /dev/watchdog is actually a miscdevice and
+ * thus we set it up like that.
*
- * Register a watchdog device including handling the legacy
- * /dev/watchdog node. /dev/watchdog is actually a miscdevice and
- * thus we set it up like that.
+ * Return: 0 if successful, error otherwise.
*/
-
int watchdog_dev_register(struct watchdog_device *wdd)
{
int ret;
@@ -1133,30 +1138,31 @@ int watchdog_dev_register(struct watchdog_device *wdd)
return ret;
}
-/*
- * watchdog_dev_unregister: unregister a watchdog device
- * @watchdog: watchdog device
+/**
+ * watchdog_dev_unregister - unregister a watchdog device
+ * @wdd: watchdog device
*
- * Unregister watchdog device and if needed the legacy
- * /dev/watchdog device.
+ * Unregister watchdog device and if needed the legacy
+ * /dev/watchdog device.
*/
-
void watchdog_dev_unregister(struct watchdog_device *wdd)
{
watchdog_unregister_pretimeout(wdd);
watchdog_cdev_unregister(wdd);
}
-/*
- * watchdog_set_last_hw_keepalive: set last HW keepalive time for watchdog
- * @wdd: watchdog device
- * @last_ping_ms: time since last HW heartbeat
+/**
+ * watchdog_set_last_hw_keepalive - set last HW keepalive time for watchdog
+ * @wdd: Watchdog device
+ * @last_ping_ms: Time since last HW heartbeat
*
- * Adjusts the last known HW keepalive time for a watchdog timer.
- * This is needed if the watchdog is already running when the probe
- * function is called, and it can't be pinged immediately. This
- * function must be called immediately after watchdog registration,
- * and min_hw_heartbeat_ms must be set for this to be useful.
+ * Adjusts the last known HW keepalive time for a watchdog timer.
+ * This is needed if the watchdog is already running when the probe
+ * function is called, and it can't be pinged immediately. This
+ * function must be called immediately after watchdog registration,
+ * and min_hw_heartbeat_ms must be set for this to be useful.
+ *
+ * Return: 0 if successful, error otherwise.
*/
int watchdog_set_last_hw_keepalive(struct watchdog_device *wdd,
unsigned int last_ping_ms)
@@ -1180,12 +1186,13 @@ int watchdog_set_last_hw_keepalive(struct watchdog_device *wdd,
}
EXPORT_SYMBOL_GPL(watchdog_set_last_hw_keepalive);
-/*
- * watchdog_dev_init: init dev part of watchdog core
+/**
+ * watchdog_dev_init - init dev part of watchdog core
*
- * Allocate a range of chardev nodes to use for watchdog devices
+ * Allocate a range of chardev nodes to use for watchdog devices.
+ *
+ * Return: 0 if successful, error otherwise.
*/
-
int __init watchdog_dev_init(void)
{
int err;
@@ -1218,12 +1225,11 @@ err_register:
return err;
}
-/*
- * watchdog_dev_exit: exit dev part of watchdog core
+/**
+ * watchdog_dev_exit - exit dev part of watchdog core
*
- * Release the range of chardev nodes used for watchdog devices
+ * Release the range of chardev nodes used for watchdog devices.
*/
-
void __exit watchdog_dev_exit(void)
{
unregister_chrdev_region(watchdog_devt, MAX_DOGS);