diff options
-rw-r--r-- | drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c | 31 | ||||
-rw-r--r-- | drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.h | 10 | ||||
-rw-r--r-- | drivers/crypto/qat/qat_common/adf_accel_devices.h | 1 | ||||
-rw-r--r-- | drivers/crypto/qat/qat_common/adf_init.c | 5 |
4 files changed, 47 insertions, 0 deletions
diff --git a/drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c b/drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c index 33d8e50dcbda..88c0ded411f1 100644 --- a/drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c +++ b/drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0-only) /* Copyright(c) 2020 Intel Corporation */ +#include <linux/iopoll.h> #include <adf_accel_devices.h> #include <adf_common_drv.h> #include <adf_pf2vf_msg.h> @@ -161,6 +162,35 @@ static void adf_enable_ints(struct adf_accel_dev *accel_dev) ADF_CSR_WR(addr, ADF_4XXX_SMIAPF_MASK_OFFSET, 0); } +static int adf_init_device(struct adf_accel_dev *accel_dev) +{ + void __iomem *addr; + u32 status; + u32 csr; + int ret; + + addr = (&GET_BARS(accel_dev)[ADF_4XXX_PMISC_BAR])->virt_addr; + + /* Temporarily mask PM interrupt */ + csr = ADF_CSR_RD(addr, ADF_4XXX_ERRMSK2); + csr |= ADF_4XXX_PM_SOU; + ADF_CSR_WR(addr, ADF_4XXX_ERRMSK2, csr); + + /* Set DRV_ACTIVE bit to power up the device */ + ADF_CSR_WR(addr, ADF_4XXX_PM_INTERRUPT, ADF_4XXX_PM_DRV_ACTIVE); + + /* Poll status register to make sure the device is powered up */ + ret = read_poll_timeout(ADF_CSR_RD, status, + status & ADF_4XXX_PM_INIT_STATE, + ADF_4XXX_PM_POLL_DELAY_US, + ADF_4XXX_PM_POLL_TIMEOUT_US, true, addr, + ADF_4XXX_PM_STATUS); + if (ret) + dev_err(&GET_DEV(accel_dev), "Failed to power up the device\n"); + + return ret; +} + static int adf_enable_pf2vf_comms(struct adf_accel_dev *accel_dev) { return 0; @@ -215,6 +245,7 @@ void adf_init_hw_data_4xxx(struct adf_hw_device_data *hw_data) hw_data->exit_arb = adf_exit_arb; hw_data->get_arb_mapping = adf_get_arbiter_mapping; hw_data->enable_ints = adf_enable_ints; + hw_data->init_device = adf_init_device; hw_data->reset_device = adf_reset_flr; hw_data->admin_ae_mask = ADF_4XXX_ADMIN_AE_MASK; hw_data->uof_get_num_objs = uof_get_num_objs; diff --git a/drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.h b/drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.h index 4fe2a776293c..924bac6feb37 100644 --- a/drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.h +++ b/drivers/crypto/qat/qat_4xxx/adf_4xxx_hw_data.h @@ -62,6 +62,16 @@ #define ADF_4XXX_ADMINMSGLR_OFFSET (0x500578) #define ADF_4XXX_MAILBOX_BASE_OFFSET (0x600970) +/* Power management */ +#define ADF_4XXX_PM_POLL_DELAY_US 20 +#define ADF_4XXX_PM_POLL_TIMEOUT_US USEC_PER_SEC +#define ADF_4XXX_PM_STATUS (0x50A00C) +#define ADF_4XXX_PM_INTERRUPT (0x50A028) +#define ADF_4XXX_PM_DRV_ACTIVE BIT(20) +#define ADF_4XXX_PM_INIT_STATE BIT(21) +/* Power management source in ERRSOU2 and ERRMSK2 */ +#define ADF_4XXX_PM_SOU BIT(18) + /* Firmware Binaries */ #define ADF_4XXX_FW "qat_4xxx.bin" #define ADF_4XXX_MMP "qat_4xxx_mmp.bin" diff --git a/drivers/crypto/qat/qat_common/adf_accel_devices.h b/drivers/crypto/qat/qat_common/adf_accel_devices.h index b62b34fccc90..ca8e23f0bcc4 100644 --- a/drivers/crypto/qat/qat_common/adf_accel_devices.h +++ b/drivers/crypto/qat/qat_common/adf_accel_devices.h @@ -170,6 +170,7 @@ struct adf_hw_device_data { int (*init_arb)(struct adf_accel_dev *accel_dev); void (*exit_arb)(struct adf_accel_dev *accel_dev); const u32 *(*get_arb_mapping)(void); + int (*init_device)(struct adf_accel_dev *accel_dev); void (*disable_iov)(struct adf_accel_dev *accel_dev); void (*configure_iov_threads)(struct adf_accel_dev *accel_dev, bool enable); diff --git a/drivers/crypto/qat/qat_common/adf_init.c b/drivers/crypto/qat/qat_common/adf_init.c index 60bc7b991d35..e3749e5817d9 100644 --- a/drivers/crypto/qat/qat_common/adf_init.c +++ b/drivers/crypto/qat/qat_common/adf_init.c @@ -79,6 +79,11 @@ int adf_dev_init(struct adf_accel_dev *accel_dev) return -EFAULT; } + if (hw_data->init_device && hw_data->init_device(accel_dev)) { + dev_err(&GET_DEV(accel_dev), "Failed to initialize device\n"); + return -EFAULT; + } + if (hw_data->init_admin_comms && hw_data->init_admin_comms(accel_dev)) { dev_err(&GET_DEV(accel_dev), "Failed initialize admin comms\n"); return -EFAULT; |