summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/Kconfig.debug14
-rw-r--r--arch/arm/include/debug/imx-uart.h18
-rw-r--r--arch/arm/mach-exynos/Kconfig1
-rw-r--r--arch/arm/mach-imx/Kconfig12
-rw-r--r--arch/arm/mach-imx/Makefile2
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig13
-rw-r--r--arch/arm/mach-s3c/Kconfig.s3c64xx1
-rw-r--r--arch/arm/mach-s3c/gpio-samsung.c1
-rw-r--r--arch/arm/mach-s3c/mach-jive.c1
-rw-r--r--arch/arm/mach-s5pv210/Kconfig1
-rw-r--r--arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c5
-rw-r--r--arch/arm64/Kconfig.platforms1
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--include/linux/platform_data/pata_ixp4xx_cf.h21
16 files changed, 27 insertions, 77 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index dd36acc87ce6..2a737156f4c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3636,6 +3636,7 @@ F: drivers/net/ethernet/broadcom/bcm4908_enet.*
F: drivers/net/ethernet/broadcom/unimac.h
BROADCOM BCM5301X ARM ARCHITECTURE
+M: Florian Fainelli <f.fainelli@gmail.com>
M: Hauke Mehrtens <hauke@hauke-m.de>
M: Rafał Miłecki <zajec5@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com
@@ -3647,6 +3648,7 @@ F: arch/arm/boot/dts/bcm953012*
F: arch/arm/mach-bcm/bcm_5301x.c
BROADCOM BCM53573 ARM ARCHITECTURE
+M: Florian Fainelli <f.fainelli@gmail.com>
M: Rafał Miłecki <rafal@milecki.pl>
L: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c2724d986fa0..796fc8017f5d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -479,7 +479,6 @@ config ARCH_S3C24XX
select GPIO_SAMSUNG
select GPIOLIB
select GENERIC_IRQ_MULTI_HANDLER
- select HAVE_S3C2410_I2C if I2C
select NEED_MACH_IO_H
select S3C2410_WATCHDOG
select SAMSUNG_ATAGS
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 98436702e0c7..644875d73ba1 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -410,12 +410,12 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX25.
- config DEBUG_IMX21_IMX27_UART
- bool "i.MX21 and i.MX27 Debug UART"
- depends on SOC_IMX21 || SOC_IMX27
+ config DEBUG_IMX27_UART
+ bool "i.MX27 Debug UART"
+ depends on SOC_IMX27
help
Say Y here if you want kernel low-level debugging support
- on i.MX21 or i.MX27.
+ on i.MX27.
config DEBUG_IMX28_UART
bool "i.MX28 Debug UART"
@@ -1481,7 +1481,7 @@ config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection"
depends on DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
@@ -1540,12 +1540,12 @@ config DEBUG_LL_INCLUDE
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
DEBUG_IMX51_UART || \
- DEBUG_IMX53_UART ||\
+ DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART || \
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index c8eb83d4b896..3edbb3c5b42b 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -11,13 +11,6 @@
#define IMX1_UART_BASE_ADDR(n) IMX1_UART##n##_BASE_ADDR
#define IMX1_UART_BASE(n) IMX1_UART_BASE_ADDR(n)
-#define IMX21_UART1_BASE_ADDR 0x1000a000
-#define IMX21_UART2_BASE_ADDR 0x1000b000
-#define IMX21_UART3_BASE_ADDR 0x1000c000
-#define IMX21_UART4_BASE_ADDR 0x1000d000
-#define IMX21_UART_BASE_ADDR(n) IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n) IMX21_UART_BASE_ADDR(n)
-
#define IMX25_UART1_BASE_ADDR 0x43f90000
#define IMX25_UART2_BASE_ADDR 0x43f94000
#define IMX25_UART3_BASE_ADDR 0x5000c000
@@ -26,6 +19,13 @@
#define IMX25_UART_BASE_ADDR(n) IMX25_UART##n##_BASE_ADDR
#define IMX25_UART_BASE(n) IMX25_UART_BASE_ADDR(n)
+#define IMX27_UART1_BASE_ADDR 0x1000a000
+#define IMX27_UART2_BASE_ADDR 0x1000b000
+#define IMX27_UART3_BASE_ADDR 0x1000c000
+#define IMX27_UART4_BASE_ADDR 0x1000d000
+#define IMX27_UART_BASE_ADDR(n) IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n) IMX27_UART_BASE_ADDR(n)
+
#define IMX31_UART1_BASE_ADDR 0x43f90000
#define IMX31_UART2_BASE_ADDR 0x43f94000
#define IMX31_UART3_BASE_ADDR 0x5000c000
@@ -112,10 +112,10 @@
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR IMX_DEBUG_UART_BASE(IMX21)
#elif defined(CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR IMX_DEBUG_UART_BASE(IMX27)
#elif defined(CONFIG_DEBUG_IMX31_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX31)
#elif defined(CONFIG_DEBUG_IMX35_UART)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index dd1ae5571f43..f7d993628cb7 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -20,7 +20,6 @@ menuconfig ARCH_EXYNOS
select GPIOLIB
select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
select HAVE_ARM_SCU if SMP
- select HAVE_S3C2410_I2C if I2C
select PINCTRL
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index b407b024dde3..f296bac467c8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -21,18 +21,6 @@ config MXC_TZIC
config MXC_AVIC
bool
-config MXC_DEBUG_BOARD
- bool "Enable MXC debug board(for 3-stack)"
- depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
- help
- The debug board is an integral part of the MXC 3-stack(PDK)
- platforms, it can be attached or removed from the peripheral
- board. On debug board, several debug devices(ethernet, UART,
- buttons, LEDs and JTAG) are implemented. Between the MCU and
- these devices, a CPLD is added as a bridge which performs
- data/address de-multiplexing and decode, signal level shift,
- interrupt control and various board functions.
-
config HAVE_IMX_ANATOP
bool
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d1506ef7a537..d5291ed9186a 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -14,8 +14,6 @@ obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
-obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 365a5853d310..4c787b4be62b 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -39,19 +39,6 @@ config ARCH_PRPMC1100
PrPCM1100 Processor Mezanine Module. For more information on
this platform, see <file:Documentation/arm/ixp4xx.rst>.
-#
-# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
-#
-config CPU_IXP46X
- bool
- depends on MACH_IXDP465
- default y
-
-config CPU_IXP43X
- bool
- depends on MACH_KIXRP435
- default y
-
comment "IXP4xx Options"
config IXP4XX_PCI_LEGACY
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index f3fcb570edf5..af01675d8769 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -12,7 +12,6 @@ menuconfig ARCH_S3C64XX
select COMMON_CLK_SAMSUNG
select GPIO_SAMSUNG if ATAGS
select GPIOLIB
- select HAVE_S3C2410_I2C if I2C
select HAVE_TCM
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS if PM
diff --git a/arch/arm/mach-s3c/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
index 76ef415789f2..fda2c01f5a08 100644
--- a/arch/arm/mach-s3c/gpio-samsung.c
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -35,6 +35,7 @@
#include "gpio-core.h"
#include "gpio-cfg.h"
#include "gpio-cfg-helpers.h"
+#include "hardware-s3c24xx.h"
#include "pm.h"
int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
index 0785638a9069..285e1f0f4145 100644
--- a/arch/arm/mach-s3c/mach-jive.c
+++ b/arch/arm/mach-s3c/mach-jive.c
@@ -247,6 +247,7 @@ static int __init jive_mtdset(char *options)
case 1:
nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
nand->partitions = jive_imageB_nand_part;
+ break;
case 0:
/* this is already setup in the nand info */
break;
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 5a96099af991..055de578b57f 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -12,7 +12,6 @@ config ARCH_S5PV210
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK_SAMSUNG
select GPIOLIB
- select HAVE_S3C2410_I2C if I2C
select PINCTRL
select PINCTRL_EXYNOS
select SOC_SAMSUNG
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index ee949255ced3..09ef73b99dd8 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -154,8 +154,10 @@ static int __init rcar_gen2_regulator_quirk(void)
return -ENODEV;
for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
- if (!of_device_is_available(np))
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
break;
+ }
ret = of_property_read_u32(np, "reg", &addr);
if (ret) /* Skip invalid entry and continue */
@@ -164,6 +166,7 @@ static int __init rcar_gen2_regulator_quirk(void)
quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
if (!quirk) {
ret = -ENOMEM;
+ of_node_put(np);
goto err_mem;
}
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 54e3910e8b9b..7d5d58800170 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -89,6 +89,7 @@ config ARCH_BRCMSTB
config ARCH_EXYNOS
bool "ARMv8 based Samsung Exynos SoC family"
select COMMON_CLK_SAMSUNG
+ select CLKSRC_EXYNOS_MCT
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select EXYNOS_PMU
select PINCTRL
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index dce392839017..c6b854a9e476 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -963,16 +963,10 @@ config I2C_RK3X
This driver can also be built as a module. If so, the module will
be called i2c-rk3x.
-config HAVE_S3C2410_I2C
- bool
- help
- This will include I2C support for Samsung SoCs. If you want to
- include I2C support for any machine, kindly select this in the
- respective Kconfig file.
-
config I2C_S3C2410
tristate "S3C/Exynos I2C Driver"
- depends on HAVE_S3C2410_I2C || COMPILE_TEST
+ depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || \
+ ARCH_S5PV210 || COMPILE_TEST
help
Say Y here to include support for I2C controller in the
Samsung SoCs (S3C, S5Pv210, Exynos).
diff --git a/include/linux/platform_data/pata_ixp4xx_cf.h b/include/linux/platform_data/pata_ixp4xx_cf.h
deleted file mode 100644
index e60fa41da4a5..000000000000
--- a/include/linux/platform_data/pata_ixp4xx_cf.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_PATA_IXP4XX_H
-#define __PLATFORM_DATA_PATA_IXP4XX_H
-
-#include <linux/types.h>
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
- volatile u32 *cs0_cfg;
- volatile u32 *cs1_cfg;
- unsigned long cs0_bits;
- unsigned long cs1_bits;
- void __iomem *cmd;
- void __iomem *ctl;
-};
-
-#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 20:18:06 +0000