diff options
| -rw-r--r-- | Documentation/ABI/testing/sysfs-platform-dfl-port | 7 | ||||
| -rw-r--r-- | drivers/fpga/dfl-afu-main.c | 79 | ||||
| -rw-r--r-- | include/uapi/linux/fpga-dfl.h | 17 |
3 files changed, 102 insertions, 1 deletions
diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-port b/Documentation/ABI/testing/sysfs-platform-dfl-port new file mode 100644 index 000000000000..cb91165f5397 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-dfl-port @@ -0,0 +1,7 @@ +What: /sys/bus/platform/devices/dfl-port.0/id +Date: June 2018 +KernelVersion: 4.19 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. It returns id of this port. One DFL FPGA device + may have more than one port. Userspace could use this id to + distinguish different ports under same FPGA device. diff --git a/drivers/fpga/dfl-afu-main.c b/drivers/fpga/dfl-afu-main.c index a38d6a825e7e..d36b3e9f3984 100644 --- a/drivers/fpga/dfl-afu-main.c +++ b/drivers/fpga/dfl-afu-main.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/fpga-dfl.h> #include "dfl.h" @@ -87,6 +88,41 @@ static int port_disable(struct platform_device *pdev) return 0; } +/* + * This function resets the FPGA Port and its accelerator (AFU) by function + * __port_disable and __port_enable (set port soft reset bit and then clear + * it). Userspace can do Port reset at any time, e.g. during DMA or Partial + * Reconfiguration. But it should never cause any system level issue, only + * functional failure (e.g. DMA or PR operation failure) and be recoverable + * from the failure. + * + * Note: the accelerator (AFU) is not accessible when its port is in reset + * (disabled). Any attempts on MMIO access to AFU while in reset, will + * result errors reported via port error reporting sub feature (if present). + */ +static int __port_reset(struct platform_device *pdev) +{ + int ret; + + ret = port_disable(pdev); + if (!ret) + port_enable(pdev); + + return ret; +} + +static int port_reset(struct platform_device *pdev) +{ + struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev->dev); + int ret; + + mutex_lock(&pdata->lock); + ret = __port_reset(pdev); + mutex_unlock(&pdata->lock); + + return ret; +} + static int port_get_id(struct platform_device *pdev) { void __iomem *base; @@ -96,23 +132,63 @@ static int port_get_id(struct platform_device *pdev) return FIELD_GET(PORT_CAP_PORT_NUM, readq(base + PORT_HDR_CAP)); } +static ssize_t +id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + int id = port_get_id(to_platform_device(dev)); + + return scnprintf(buf, PAGE_SIZE, "%d\n", id); +} +static DEVICE_ATTR_RO(id); + +static const struct attribute *port_hdr_attrs[] = { + &dev_attr_id.attr, + NULL, +}; + static int port_hdr_init(struct platform_device *pdev, struct dfl_feature *feature) { dev_dbg(&pdev->dev, "PORT HDR Init.\n"); - return 0; + port_reset(pdev); + + return sysfs_create_files(&pdev->dev.kobj, port_hdr_attrs); } static void port_hdr_uinit(struct platform_device *pdev, struct dfl_feature *feature) { dev_dbg(&pdev->dev, "PORT HDR UInit.\n"); + + sysfs_remove_files(&pdev->dev.kobj, port_hdr_attrs); +} + +static long +port_hdr_ioctl(struct platform_device *pdev, struct dfl_feature *feature, + unsigned int cmd, unsigned long arg) +{ + long ret; + + switch (cmd) { + case DFL_FPGA_PORT_RESET: + if (!arg) + ret = port_reset(pdev); + else + ret = -EINVAL; + break; + default: + dev_dbg(&pdev->dev, "%x cmd not handled", cmd); + ret = -ENODEV; + } + + return ret; } static const struct dfl_feature_ops port_hdr_ops = { .init = port_hdr_init, .uinit = port_hdr_uinit, + .ioctl = port_hdr_ioctl, }; static struct dfl_feature_driver port_feature_drvs[] = { @@ -154,6 +230,7 @@ static int afu_release(struct inode *inode, struct file *filp) pdata = dev_get_platdata(&pdev->dev); + port_reset(pdev); dfl_feature_dev_use_end(pdata); return 0; diff --git a/include/uapi/linux/fpga-dfl.h b/include/uapi/linux/fpga-dfl.h index 9666af85a8f5..e6b4dd26cc68 100644 --- a/include/uapi/linux/fpga-dfl.h +++ b/include/uapi/linux/fpga-dfl.h @@ -29,8 +29,11 @@ #define DFL_FPGA_MAGIC 0xB6 #define DFL_FPGA_BASE 0 +#define DFL_PORT_BASE 0x40 #define DFL_FME_BASE 0x80 +/* Common IOCTLs for both FME and AFU file descriptor */ + /** * DFL_FPGA_GET_API_VERSION - _IO(DFL_FPGA_MAGIC, DFL_FPGA_BASE + 0) * @@ -49,6 +52,20 @@ #define DFL_FPGA_CHECK_EXTENSION _IO(DFL_FPGA_MAGIC, DFL_FPGA_BASE + 1) +/* IOCTLs for AFU file descriptor */ + +/** + * DFL_FPGA_PORT_RESET - _IO(DFL_FPGA_MAGIC, DFL_PORT_BASE + 0) + * + * Reset the FPGA Port and its AFU. No parameters are supported. + * Userspace can do Port reset at any time, e.g. during DMA or PR. But + * it should never cause any system level issue, only functional failure + * (e.g. DMA or PR operation failure) and be recoverable from the failure. + * Return: 0 on success, -errno of failure + */ + +#define DFL_FPGA_PORT_RESET _IO(DFL_FPGA_MAGIC, DFL_PORT_BASE + 0) + /* IOCTLs for FME file descriptor */ /** |