diff options
| -rw-r--r-- | drivers/leds/leds-bd2802.c | 27 | ||||
| -rw-r--r-- | include/linux/leds-bd2802.h | 1 |
2 files changed, 18 insertions, 10 deletions
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index e7ec6bff2b5f..bd61a823d0ca 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -10,7 +10,7 @@ #include <linux/module.h> #include <linux/i2c.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/delay.h> #include <linux/leds.h> #include <linux/leds-bd2802.h> @@ -67,6 +67,7 @@ struct led_state { struct bd2802_led { struct bd2802_led_platform_data *pdata; struct i2c_client *client; + struct gpio_desc *reset; struct rw_semaphore rwsem; struct led_state led[2]; @@ -200,7 +201,7 @@ static void bd2802_update_state(struct bd2802_led *led, enum led_ids id, return; if (bd2802_is_all_off(led) && !led->adf_on) { - gpio_set_value(led->pdata->reset_gpio, 0); + gpiod_set_value(led->reset, 1); return; } @@ -226,7 +227,7 @@ static void bd2802_configure(struct bd2802_led *led) static void bd2802_reset_cancel(struct bd2802_led *led) { - gpio_set_value(led->pdata->reset_gpio, 1); + gpiod_set_value(led->reset, 0); udelay(100); bd2802_configure(led); } @@ -420,7 +421,7 @@ static void bd2802_disable_adv_conf(struct bd2802_led *led) bd2802_addr_attributes[i]); if (bd2802_is_all_off(led)) - gpio_set_value(led->pdata->reset_gpio, 0); + gpiod_set_value(led->reset, 1); led->adf_on = 0; } @@ -670,8 +671,16 @@ static int bd2802_probe(struct i2c_client *client, pdata = led->pdata = dev_get_platdata(&client->dev); i2c_set_clientdata(client, led); - /* Configure RESET GPIO (L: RESET, H: RESET cancel) */ - gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB"); + /* + * Configure RESET GPIO (L: RESET, H: RESET cancel) + * + * We request the reset GPIO as OUT_LOW which means de-asserted, + * board files specifying this GPIO line in a machine descriptor + * table should take care to specify GPIO_ACTIVE_LOW for this line. + */ + led->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(led->reset)) + return PTR_ERR(led->reset); /* Tacss = min 0.1ms */ udelay(100); @@ -685,7 +694,7 @@ static int bd2802_probe(struct i2c_client *client, dev_info(&client->dev, "return 0x%02x\n", ret); /* To save the power, reset BD2802 after detecting */ - gpio_set_value(led->pdata->reset_gpio, 0); + gpiod_set_value(led->reset, 1); /* Default attributes */ led->wave_pattern = BD2802_PATTERN_HALF; @@ -720,7 +729,7 @@ static int bd2802_remove(struct i2c_client *client) struct bd2802_led *led = i2c_get_clientdata(client); int i; - gpio_set_value(led->pdata->reset_gpio, 0); + gpiod_set_value(led->reset, 1); bd2802_unregister_led_classdev(led); if (led->adf_on) bd2802_disable_adv_conf(led); @@ -750,7 +759,7 @@ static int bd2802_suspend(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct bd2802_led *led = i2c_get_clientdata(client); - gpio_set_value(led->pdata->reset_gpio, 0); + gpiod_set_value(led->reset, 1); return 0; } diff --git a/include/linux/leds-bd2802.h b/include/linux/leds-bd2802.h index dd93c8d787b4..ec577f5f8707 100644 --- a/include/linux/leds-bd2802.h +++ b/include/linux/leds-bd2802.h @@ -11,7 +11,6 @@ #define _LEDS_BD2802_H_ struct bd2802_led_platform_data{ - int reset_gpio; u8 rgb_time; }; |