diff options
| -rw-r--r-- | drivers/net/ethernet/intel/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/defines.h | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ptp.c | 85 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/regs.h | 4 |
4 files changed, 103 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index fa593dd3efe1..3772f3ac956e 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -83,6 +83,15 @@ config E1000E To compile this driver as a module, choose M here. The module will be called e1000e. +config E1000E_HWTS + bool "Support HW cross-timestamp on PCH devices" + default y + depends on E1000E && X86 + ---help--- + Say Y to enable hardware supported cross-timestamping on PCH + devices. The cross-timestamp is available through the PTP clock + driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE). + config IGB tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" depends on PCI diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index f7c7804d79e5..0641c0098738 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -528,6 +528,11 @@ #define E1000_RXCW_C 0x20000000 /* Receive config */ #define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ +/* HH Time Sync */ +#define E1000_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK 0x0000F000 /* max delay */ +#define E1000_TSYNCTXCTL_SYNC_COMP 0x40000000 /* sync complete */ +#define E1000_TSYNCTXCTL_START_SYNC 0x80000000 /* initiate sync */ + #define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ #define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c index 25a0ad5102d6..e2ff3ef75d5d 100644 --- a/drivers/net/ethernet/intel/e1000e/ptp.c +++ b/drivers/net/ethernet/intel/e1000e/ptp.c @@ -26,6 +26,12 @@ #include "e1000.h" +#ifdef CONFIG_E1000E_HWTS +#include <linux/clocksource.h> +#include <linux/ktime.h> +#include <asm/tsc.h> +#endif + /** * e1000e_phc_adjfreq - adjust the frequency of the hardware clock * @ptp: ptp clock structure @@ -98,6 +104,78 @@ static int e1000e_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) return 0; } +#ifdef CONFIG_E1000E_HWTS +#define MAX_HW_WAIT_COUNT (3) + +/** + * e1000e_phc_get_syncdevicetime - Callback given to timekeeping code reads system/device registers + * @device: current device time + * @system: system counter value read synchronously with device time + * @ctx: context provided by timekeeping code + * + * Read device and system (ART) clock simultaneously and return the corrected + * clock values in ns. + **/ +static int e1000e_phc_get_syncdevicetime(ktime_t *device, + struct system_counterval_t *system, + void *ctx) +{ + struct e1000_adapter *adapter = (struct e1000_adapter *)ctx; + struct e1000_hw *hw = &adapter->hw; + unsigned long flags; + int i; + u32 tsync_ctrl; + cycle_t dev_cycles; + cycle_t sys_cycles; + + tsync_ctrl = er32(TSYNCTXCTL); + tsync_ctrl |= E1000_TSYNCTXCTL_START_SYNC | + E1000_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK; + ew32(TSYNCTXCTL, tsync_ctrl); + for (i = 0; i < MAX_HW_WAIT_COUNT; ++i) { + udelay(1); + tsync_ctrl = er32(TSYNCTXCTL); + if (tsync_ctrl & E1000_TSYNCTXCTL_SYNC_COMP) + break; + } + + if (i == MAX_HW_WAIT_COUNT) + return -ETIMEDOUT; + + dev_cycles = er32(SYSSTMPH); + dev_cycles <<= 32; + dev_cycles |= er32(SYSSTMPL); + spin_lock_irqsave(&adapter->systim_lock, flags); + *device = ns_to_ktime(timecounter_cyc2time(&adapter->tc, dev_cycles)); + spin_unlock_irqrestore(&adapter->systim_lock, flags); + + sys_cycles = er32(PLTSTMPH); + sys_cycles <<= 32; + sys_cycles |= er32(PLTSTMPL); + *system = convert_art_to_tsc(sys_cycles); + + return 0; +} + +/** + * e1000e_phc_getsynctime - Reads the current system/device cross timestamp + * @ptp: ptp clock structure + * @cts: structure containing timestamp + * + * Read device and system (ART) clock simultaneously and return the scaled + * clock values in ns. + **/ +static int e1000e_phc_getcrosststamp(struct ptp_clock_info *ptp, + struct system_device_crosststamp *xtstamp) +{ + struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter, + ptp_clock_info); + + return get_device_system_crosststamp(e1000e_phc_get_syncdevicetime, + adapter, NULL, xtstamp); +} +#endif/*CONFIG_E1000E_HWTS*/ + /** * e1000e_phc_gettime - Reads the current time from the hardware clock * @ptp: ptp clock structure @@ -236,6 +314,13 @@ void e1000e_ptp_init(struct e1000_adapter *adapter) break; } +#ifdef CONFIG_E1000E_HWTS + /* CPU must have ART and GBe must be from Sunrise Point or greater */ + if (hw->mac.type >= e1000_pch_spt && boot_cpu_has(X86_FEATURE_ART)) + adapter->ptp_clock_info.getcrosststamp = + e1000e_phc_getcrosststamp; +#endif/*CONFIG_E1000E_HWTS*/ + INIT_DELAYED_WORK(&adapter->systim_overflow_work, e1000e_systim_overflow_work); diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h index 1d5e0b77062a..0cb4d365e5ad 100644 --- a/drivers/net/ethernet/intel/e1000e/regs.h +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -245,6 +245,10 @@ #define E1000_SYSTIML 0x0B600 /* System time register Low - RO */ #define E1000_SYSTIMH 0x0B604 /* System time register High - RO */ #define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */ +#define E1000_SYSSTMPL 0x0B648 /* HH Timesync system stamp low register */ +#define E1000_SYSSTMPH 0x0B64C /* HH Timesync system stamp hi register */ +#define E1000_PLTSTMPL 0x0B640 /* HH Timesync platform stamp low register */ +#define E1000_PLTSTMPH 0x0B644 /* HH Timesync platform stamp hi register */ #define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */ #define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */ |