summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--include/linux/ieee80211.h13
-rw-r--r--include/net/cfg80211.h57
-rw-r--r--include/uapi/linux/nl80211.h86
-rw-r--r--net/wireless/nl80211.c90
-rw-r--r--net/wireless/sme.c25
5 files changed, 259 insertions, 12 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 22bf0676d928..294fa6273a62 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1723,6 +1723,9 @@ enum ieee80211_statuscode {
WLAN_STATUS_REJECT_DSE_BAND = 96,
WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99,
WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103,
+ /* 802.11ai */
+ WLAN_STATUS_FILS_AUTHENTICATION_FAILURE = 108,
+ WLAN_STATUS_UNKNOWN_AUTHENTICATION_SERVER = 109,
};
@@ -2104,6 +2107,12 @@ enum ieee80211_key_len {
#define FILS_NONCE_LEN 16
#define FILS_MAX_KEK_LEN 64
+#define FILS_ERP_MAX_USERNAME_LEN 16
+#define FILS_ERP_MAX_REALM_LEN 253
+#define FILS_ERP_MAX_RRK_LEN 64
+
+#define PMK_MAX_LEN 48
+
/* Public action codes */
enum ieee80211_pub_actioncode {
WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4,
@@ -2355,6 +2364,10 @@ enum ieee80211_sa_query_action {
#define WLAN_AKM_SUITE_TDLS SUITE(0x000FAC, 7)
#define WLAN_AKM_SUITE_SAE SUITE(0x000FAC, 8)
#define WLAN_AKM_SUITE_FT_OVER_SAE SUITE(0x000FAC, 9)
+#define WLAN_AKM_SUITE_FILS_SHA256 SUITE(0x000FAC, 14)
+#define WLAN_AKM_SUITE_FILS_SHA384 SUITE(0x000FAC, 15)
+#define WLAN_AKM_SUITE_FT_FILS_SHA256 SUITE(0x000FAC, 16)
+#define WLAN_AKM_SUITE_FT_FILS_SHA384 SUITE(0x000FAC, 17)
#define WLAN_MAX_KEY_LEN 32
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index da12d5b86e1b..042137d7d226 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2073,6 +2073,19 @@ struct cfg80211_bss_selection {
* the BSSID of the current association, i.e., to the value that is
* included in the Current AP address field of the Reassociation Request
* frame.
+ * @fils_erp_username: EAP re-authentication protocol (ERP) username part of the
+ * NAI or %NULL if not specified. This is used to construct FILS wrapped
+ * data IE.
+ * @fils_erp_username_len: Length of @fils_erp_username in octets.
+ * @fils_erp_realm: EAP re-authentication protocol (ERP) realm part of NAI or
+ * %NULL if not specified. This specifies the domain name of ER server and
+ * is used to construct FILS wrapped data IE.
+ * @fils_erp_realm_len: Length of @fils_erp_realm in octets.
+ * @fils_erp_next_seq_num: The next sequence number to use in the FILS ERP
+ * messages. This is also used to construct FILS wrapped data IE.
+ * @fils_erp_rrk: ERP re-authentication Root Key (rRK) used to derive additional
+ * keys in FILS or %NULL if not specified.
+ * @fils_erp_rrk_len: Length of @fils_erp_rrk in octets.
*/
struct cfg80211_connect_params {
struct ieee80211_channel *channel;
@@ -2098,6 +2111,13 @@ struct cfg80211_connect_params {
bool pbss;
struct cfg80211_bss_selection bss_select;
const u8 *prev_bssid;
+ const u8 *fils_erp_username;
+ size_t fils_erp_username_len;
+ const u8 *fils_erp_realm;
+ size_t fils_erp_realm_len;
+ u16 fils_erp_next_seq_num;
+ const u8 *fils_erp_rrk;
+ size_t fils_erp_rrk_len;
};
/**
@@ -2136,12 +2156,27 @@ enum wiphy_params_flags {
* This structure is passed to the set/del_pmksa() method for PMKSA
* caching.
*
- * @bssid: The AP's BSSID.
- * @pmkid: The PMK material itself.
+ * @bssid: The AP's BSSID (may be %NULL).
+ * @pmkid: The identifier to refer a PMKSA.
+ * @pmk: The PMK for the PMKSA identified by @pmkid. This is used for key
+ * derivation by a FILS STA. Otherwise, %NULL.
+ * @pmk_len: Length of the @pmk. The length of @pmk can differ depending on
+ * the hash algorithm used to generate this.
+ * @ssid: SSID to specify the ESS within which a PMKSA is valid when using FILS
+ * cache identifier (may be %NULL).
+ * @ssid_len: Length of the @ssid in octets.
+ * @cache_id: 2-octet cache identifier advertized by a FILS AP identifying the
+ * scope of PMKSA. This is valid only if @ssid_len is non-zero (may be
+ * %NULL).
*/
struct cfg80211_pmksa {
const u8 *bssid;
const u8 *pmkid;
+ const u8 *pmk;
+ size_t pmk_len;
+ const u8 *ssid;
+ size_t ssid_len;
+ const u8 *cache_id;
};
/**
@@ -5153,6 +5188,17 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
* @req_ie_len: Association request IEs length
* @resp_ie: Association response IEs (may be %NULL)
* @resp_ie_len: Association response IEs length
+ * @fils_kek: KEK derived from a successful FILS connection (may be %NULL)
+ * @fils_kek_len: Length of @fils_kek in octets
+ * @update_erp_next_seq_num: Boolean value to specify whether the value in
+ * @fils_erp_next_seq_num is valid.
+ * @fils_erp_next_seq_num: The next sequence number to use in ERP message in
+ * FILS Authentication. This value should be specified irrespective of the
+ * status for a FILS connection.
+ * @pmk: A new PMK if derived from a successful FILS connection (may be %NULL).
+ * @pmk_len: Length of @pmk in octets
+ * @pmkid: A new PMKID if derived from a successful FILS connection or the PMKID
+ * used for this FILS connection (may be %NULL).
* @timeout_reason: Reason for connection timeout. This is used when the
* connection fails due to a timeout instead of an explicit rejection from
* the AP. %NL80211_TIMEOUT_UNSPECIFIED is used when the timeout reason is
@@ -5168,6 +5214,13 @@ struct cfg80211_connect_resp_params {
size_t req_ie_len;
const u8 *resp_ie;
size_t resp_ie_len;
+ const u8 *fils_kek;
+ size_t fils_kek_len;
+ bool update_erp_next_seq_num;
+ u16 fils_erp_next_seq_num;
+ const u8 *pmk;
+ size_t pmk_len;
+ const u8 *pmkid;
enum nl80211_timeout_reason timeout_reason;
};
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index cd4dfef58fab..6095a6c4c412 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -173,6 +173,42 @@
*/
/**
+ * DOC: FILS shared key authentication offload
+ *
+ * FILS shared key authentication offload can be advertized by drivers by
+ * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
+ * FILS shared key authentication offload should be able to construct the
+ * authentication and association frames for FILS shared key authentication and
+ * eventually do a key derivation as per IEEE 802.11ai. The below additional
+ * parameters should be given to driver in %NL80211_CMD_CONNECT.
+ * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
+ * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
+ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
+ * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
+ * rIK should be used to generate an authentication tag on the ERP message and
+ * rMSK should be used to derive a PMKSA.
+ * rIK, rMSK should be generated and keyname_nai, sequence number should be used
+ * as specified in IETF RFC 6696.
+ *
+ * When FILS shared key authentication is completed, driver needs to provide the
+ * below additional parameters to userspace.
+ * %NL80211_ATTR_FILS_KEK - used for key renewal
+ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
+ * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
+ * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
+ * The PMKSA can be maintained in userspace persistently so that it can be used
+ * later after reboots or wifi turn off/on also.
+ *
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
+ * capable AP supporting PMK caching. It specifies the scope within which the
+ * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
+ * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
+ * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
+ * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
+ * use in a FILS shared key connection with PMKSA caching.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -370,10 +406,18 @@
* @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
* NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
*
- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
- * (for the BSSID) and %NL80211_ATTR_PMKID.
+ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
+ * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
+ * (PMK is used for PTKSA derivation in case of FILS shared key offload) or
+ * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
+ * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
+ * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
+ * advertized by a FILS capable AP identifying the scope of PMKSA in an
+ * ESS.
* @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
- * (for the BSSID) and %NL80211_ATTR_PMKID.
+ * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
+ * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
+ * authentication.
* @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
*
* @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
@@ -2012,6 +2056,31 @@ enum nl80211_commands {
* u32 attribute with an &enum nl80211_timeout_reason value. This is used,
* e.g., with %NL80211_CMD_CONNECT event.
*
+ * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
+ * username part of NAI used to refer keys rRK and rIK. This is used with
+ * %NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
+ * of NAI specifying the domain name of the ER server. This is used with
+ * %NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
+ * to use in ERP messages. This is used in generating the FILS wrapped data
+ * for FILS authentication and is used with %NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
+ * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
+ * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
+ * from successful FILS authentication and is used with
+ * %NL80211_CMD_CONNECT.
+ *
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
+ * identifying the scope of PMKSAs. This is used with
+ * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
+ *
+ * @NL80211_ATTR_PMK: PMK for the PMKSA identified by %NL80211_ATTR_PMKID.
+ * This is used with @NL80211_CMD_SET_PMKSA.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2423,6 +2492,14 @@ enum nl80211_attrs {
NL80211_ATTR_TIMEOUT_REASON,
+ NL80211_ATTR_FILS_ERP_USERNAME,
+ NL80211_ATTR_FILS_ERP_REALM,
+ NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
+ NL80211_ATTR_FILS_ERP_RRK,
+ NL80211_ATTR_FILS_CACHE_ID,
+
+ NL80211_ATTR_PMK,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -4759,6 +4836,8 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
* %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
* RSSI threshold values to monitor rather than exactly one threshold.
+ * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
+ * authentication with %NL80211_CMD_CONNECT.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4778,6 +4857,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
NL80211_EXT_FEATURE_CQM_RSSI_LIST,
+ NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3d635c865281..9910aae08f1a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -410,6 +410,15 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
.len = sizeof(struct nl80211_bss_select_rssi_adjust)
},
[NL80211_ATTR_TIMEOUT_REASON] = { .type = NLA_U32 },
+ [NL80211_ATTR_FILS_ERP_USERNAME] = { .type = NLA_BINARY,
+ .len = FILS_ERP_MAX_USERNAME_LEN },
+ [NL80211_ATTR_FILS_ERP_REALM] = { .type = NLA_BINARY,
+ .len = FILS_ERP_MAX_REALM_LEN },
+ [NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM] = { .type = NLA_U16 },
+ [NL80211_ATTR_FILS_ERP_RRK] = { .type = NLA_BINARY,
+ .len = FILS_ERP_MAX_RRK_LEN },
+ [NL80211_ATTR_FILS_CACHE_ID] = { .len = 2 },
+ [NL80211_ATTR_PMK] = { .type = NLA_BINARY, .len = PMK_MAX_LEN },
};
/* policy for the key attributes */
@@ -3832,6 +3841,19 @@ static bool nl80211_valid_auth_type(struct cfg80211_registered_device *rdev,
return false;
return true;
case NL80211_CMD_CONNECT:
+ /* SAE not supported yet */
+ if (auth_type == NL80211_AUTHTYPE_SAE)
+ return false;
+ /* FILS with SK PFS or PK not supported yet */
+ if (auth_type == NL80211_AUTHTYPE_FILS_SK_PFS ||
+ auth_type == NL80211_AUTHTYPE_FILS_PK)
+ return false;
+ if (!wiphy_ext_feature_isset(
+ &rdev->wiphy,
+ NL80211_EXT_FEATURE_FILS_SK_OFFLOAD) &&
+ auth_type == NL80211_AUTHTYPE_FILS_SK)
+ return false;
+ return true;
case NL80211_CMD_START_AP:
/* SAE not supported yet */
if (auth_type == NL80211_AUTHTYPE_SAE)
@@ -8906,6 +8928,35 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
}
}
+ if (wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_FILS_SK_OFFLOAD) &&
+ info->attrs[NL80211_ATTR_FILS_ERP_USERNAME] &&
+ info->attrs[NL80211_ATTR_FILS_ERP_REALM] &&
+ info->attrs[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM] &&
+ info->attrs[NL80211_ATTR_FILS_ERP_RRK]) {
+ connect.fils_erp_username =
+ nla_data(info->attrs[NL80211_ATTR_FILS_ERP_USERNAME]);
+ connect.fils_erp_username_len =
+ nla_len(info->attrs[NL80211_ATTR_FILS_ERP_USERNAME]);
+ connect.fils_erp_realm =
+ nla_data(info->attrs[NL80211_ATTR_FILS_ERP_REALM]);
+ connect.fils_erp_realm_len =
+ nla_len(info->attrs[NL80211_ATTR_FILS_ERP_REALM]);
+ connect.fils_erp_next_seq_num =
+ nla_get_u16(
+ info->attrs[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM]);
+ connect.fils_erp_rrk =
+ nla_data(info->attrs[NL80211_ATTR_FILS_ERP_RRK]);
+ connect.fils_erp_rrk_len =
+ nla_len(info->attrs[NL80211_ATTR_FILS_ERP_RRK]);
+ } else if (info->attrs[NL80211_ATTR_FILS_ERP_USERNAME] ||
+ info->attrs[NL80211_ATTR_FILS_ERP_REALM] ||
+ info->attrs[NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM] ||
+ info->attrs[NL80211_ATTR_FILS_ERP_RRK]) {
+ kzfree(connkeys);
+ return -EINVAL;
+ }
+
wdev_lock(dev->ieee80211_ptr);
err = cfg80211_connect(rdev, dev, &connect, connkeys,
@@ -9025,14 +9076,28 @@ static int nl80211_setdel_pmksa(struct sk_buff *skb, struct genl_info *info)
memset(&pmksa, 0, sizeof(struct cfg80211_pmksa));
- if (!info->attrs[NL80211_ATTR_MAC])
- return -EINVAL;
-
if (!info->attrs[NL80211_ATTR_PMKID])
return -EINVAL;
pmksa.pmkid = nla_data(info->attrs[NL80211_ATTR_PMKID]);
- pmksa.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
+
+ if (info->attrs[NL80211_ATTR_MAC]) {
+ pmksa.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
+ } else if (info->attrs[NL80211_ATTR_SSID] &&
+ info->attrs[NL80211_ATTR_FILS_CACHE_ID] &&
+ (info->genlhdr->cmd == NL80211_CMD_DEL_PMKSA ||
+ info->attrs[NL80211_ATTR_PMK])) {
+ pmksa.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
+ pmksa.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
+ pmksa.cache_id =
+ nla_data(info->attrs[NL80211_ATTR_FILS_CACHE_ID]);
+ } else {
+ return -EINVAL;
+ }
+ if (info->attrs[NL80211_ATTR_PMK]) {
+ pmksa.pmk = nla_data(info->attrs[NL80211_ATTR_PMK]);
+ pmksa.pmk_len = nla_len(info->attrs[NL80211_ATTR_PMK]);
+ }
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT)
@@ -13471,7 +13536,9 @@ void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
struct sk_buff *msg;
void *hdr;
- msg = nlmsg_new(100 + cr->req_ie_len + cr->resp_ie_len, gfp);
+ msg = nlmsg_new(100 + cr->req_ie_len + cr->resp_ie_len +
+ cr->fils_kek_len + cr->pmk_len +
+ (cr->pmkid ? WLAN_PMKID_LEN : 0), gfp);
if (!msg)
return;
@@ -13496,7 +13563,18 @@ void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
nla_put(msg, NL80211_ATTR_REQ_IE, cr->req_ie_len, cr->req_ie)) ||
(cr->resp_ie &&
nla_put(msg, NL80211_ATTR_RESP_IE, cr->resp_ie_len,
- cr->resp_ie)))
+ cr->resp_ie)) ||
+ (cr->update_erp_next_seq_num &&
+ nla_put_u16(msg, NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
+ cr->fils_erp_next_seq_num)) ||
+ (cr->status == WLAN_STATUS_SUCCESS &&
+ ((cr->fils_kek &&
+ nla_put(msg, NL80211_ATTR_FILS_KEK, cr->fils_kek_len,
+ cr->fils_kek)) ||
+ (cr->pmk &&
+ nla_put(msg, NL80211_ATTR_PMK, cr->pmk_len, cr->pmk)) ||
+ (cr->pmkid &&
+ nla_put(msg, NL80211_ATTR_PMKID, WLAN_PMKID_LEN, cr->pmkid)))))
goto nla_put_failure;
genlmsg_end(msg, hdr);
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index ebd7adc27246..6459bb7c21f7 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -805,7 +805,9 @@ void cfg80211_connect_done(struct net_device *dev,
}
ev = kzalloc(sizeof(*ev) + (params->bssid ? ETH_ALEN : 0) +
- params->req_ie_len + params->resp_ie_len, gfp);
+ params->req_ie_len + params->resp_ie_len +
+ params->fils_kek_len + params->pmk_len +
+ (params->pmkid ? WLAN_PMKID_LEN : 0), gfp);
if (!ev) {
cfg80211_put_bss(wdev->wiphy, params->bss);
return;
@@ -832,6 +834,27 @@ void cfg80211_connect_done(struct net_device *dev,
params->resp_ie_len);
next += params->resp_ie_len;
}
+ if (params->fils_kek_len) {
+ ev->cr.fils_kek = next;
+ ev->cr.fils_kek_len = params->fils_kek_len;
+ memcpy((void *)ev->cr.fils_kek, params->fils_kek,
+ params->fils_kek_len);
+ next += params->fils_kek_len;
+ }
+ if (params->pmk_len) {
+ ev->cr.pmk = next;
+ ev->cr.pmk_len = params->pmk_len;
+ memcpy((void *)ev->cr.pmk, params->pmk, params->pmk_len);
+ next += params->pmk_len;
+ }
+ if (params->pmkid) {
+ ev->cr.pmkid = next;
+ memcpy((void *)ev->cr.pmkid, params->pmkid, WLAN_PMKID_LEN);
+ next += WLAN_PMKID_LEN;
+ }
+ ev->cr.update_erp_next_seq_num = params->update_erp_next_seq_num;
+ if (params->update_erp_next_seq_num)
+ ev->cr.fils_erp_next_seq_num = params->fils_erp_next_seq_num;
if (params->bss)
cfg80211_hold_bss(bss_from_pub(params->bss));
ev->cr.bss = params->bss;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 23:21:11 +0000