diff options
| -rw-r--r-- | arch/x86/include/asm/hpet.h | 7 | ||||
| -rw-r--r-- | arch/x86/kernel/apic/msi.c | 4 | ||||
| -rw-r--r-- | arch/x86/kernel/hpet.c | 935 |
3 files changed, 427 insertions, 519 deletions
diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h index 67385d56d4f4..6352dee37cda 100644 --- a/arch/x86/include/asm/hpet.h +++ b/arch/x86/include/asm/hpet.h @@ -75,16 +75,15 @@ extern unsigned int hpet_readl(unsigned int a); extern void force_hpet_resume(void); struct irq_data; -struct hpet_dev; +struct hpet_channel; struct irq_domain; extern void hpet_msi_unmask(struct irq_data *data); extern void hpet_msi_mask(struct irq_data *data); -extern void hpet_msi_write(struct hpet_dev *hdev, struct msi_msg *msg); -extern void hpet_msi_read(struct hpet_dev *hdev, struct msi_msg *msg); +extern void hpet_msi_write(struct hpet_channel *hc, struct msi_msg *msg); extern struct irq_domain *hpet_create_irq_domain(int hpet_id); extern int hpet_assign_irq(struct irq_domain *domain, - struct hpet_dev *dev, int dev_num); + struct hpet_channel *hc, int dev_num); #ifdef CONFIG_HPET_EMULATE_RTC diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c index dad0dd759de2..7f7533462474 100644 --- a/arch/x86/kernel/apic/msi.c +++ b/arch/x86/kernel/apic/msi.c @@ -370,14 +370,14 @@ struct irq_domain *hpet_create_irq_domain(int hpet_id) return d; } -int hpet_assign_irq(struct irq_domain *domain, struct hpet_dev *dev, +int hpet_assign_irq(struct irq_domain *domain, struct hpet_channel *hc, int dev_num) { struct irq_alloc_info info; init_irq_alloc_info(&info, NULL); info.type = X86_IRQ_ALLOC_TYPE_HPET; - info.hpet_data = dev; + info.hpet_data = hc; info.hpet_id = hpet_dev_id(domain); info.hpet_index = dev_num; diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index a0573f2e7763..c43e96a938d0 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -1,32 +1,44 @@ // SPDX-License-Identifier: GPL-2.0-only -#include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/interrupt.h> -#include <linux/irq.h> #include <linux/export.h> #include <linux/delay.h> -#include <linux/errno.h> -#include <linux/i8253.h> -#include <linux/slab.h> #include <linux/hpet.h> -#include <linux/init.h> #include <linux/cpu.h> -#include <linux/pm.h> -#include <linux/io.h> +#include <linux/irq.h> -#include <asm/cpufeature.h> -#include <asm/irqdomain.h> -#include <asm/fixmap.h> #include <asm/hpet.h> #include <asm/time.h> -#define HPET_MASK CLOCKSOURCE_MASK(32) +#undef pr_fmt +#define pr_fmt(fmt) "hpet: " fmt -#define HPET_DEV_USED_BIT 2 -#define HPET_DEV_USED (1 << HPET_DEV_USED_BIT) -#define HPET_DEV_VALID 0x8 -#define HPET_DEV_FSB_CAP 0x1000 -#define HPET_DEV_PERI_CAP 0x2000 +enum hpet_mode { + HPET_MODE_UNUSED, + HPET_MODE_LEGACY, + HPET_MODE_CLOCKEVT, + HPET_MODE_DEVICE, +}; + +struct hpet_channel { + struct clock_event_device evt; + unsigned int num; + unsigned int cpu; + unsigned int irq; + unsigned int in_use; + enum hpet_mode mode; + unsigned int boot_cfg; + char name[10]; +}; + +struct hpet_base { + unsigned int nr_channels; + unsigned int nr_clockevents; + unsigned int boot_cfg; + struct hpet_channel *channels; +}; + +#define HPET_MASK CLOCKSOURCE_MASK(32) #define HPET_MIN_CYCLES 128 #define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1)) @@ -39,22 +51,25 @@ u8 hpet_blockid; /* OS timer block num */ bool hpet_msi_disable; #ifdef CONFIG_PCI_MSI -static unsigned int hpet_num_timers; +static DEFINE_PER_CPU(struct hpet_channel *, cpu_hpet_channel); +static struct irq_domain *hpet_domain; #endif + static void __iomem *hpet_virt_address; -struct hpet_dev { - struct clock_event_device evt; - unsigned int num; - int cpu; - unsigned int irq; - unsigned int flags; - char name[10]; -}; +static struct hpet_base hpet_base; + +static bool hpet_legacy_int_enabled; +static unsigned long hpet_freq; -static inline struct hpet_dev *EVT_TO_HPET_DEV(struct clock_event_device *evtdev) +bool boot_hpet_disable; +bool hpet_force_user; +static bool hpet_verbose; + +static inline +struct hpet_channel *clockevent_to_channel(struct clock_event_device *evt) { - return container_of(evtdev, struct hpet_dev, evt); + return container_of(evt, struct hpet_channel, evt); } inline unsigned int hpet_readl(unsigned int a) @@ -67,10 +82,6 @@ static inline void hpet_writel(unsigned int d, unsigned int a) writel(d, hpet_virt_address + a); } -#ifdef CONFIG_X86_64 -#include <asm/pgtable.h> -#endif - static inline void hpet_set_mapping(void) { hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); @@ -85,10 +96,6 @@ static inline void hpet_clear_mapping(void) /* * HPET command line enable / disable */ -bool boot_hpet_disable; -bool hpet_force_user; -static bool hpet_verbose; - static int __init hpet_setup(char *str) { while (str) { @@ -120,13 +127,8 @@ static inline int is_hpet_capable(void) return !boot_hpet_disable && hpet_address; } -/* - * HPET timer interrupt enable / disable - */ -static bool hpet_legacy_int_enabled; - /** - * is_hpet_enabled - check whether the hpet timer interrupt is enabled + * is_hpet_enabled - Check whether the legacy HPET timer interrupt is enabled */ int is_hpet_enabled(void) { @@ -136,32 +138,36 @@ EXPORT_SYMBOL_GPL(is_hpet_enabled); static void _hpet_print_config(const char *function, int line) { - u32 i, timers, l, h; - printk(KERN_INFO "hpet: %s(%d):\n", function, line); - l = hpet_readl(HPET_ID); - h = hpet_readl(HPET_PERIOD); - timers = ((l & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; - printk(KERN_INFO "hpet: ID: 0x%x, PERIOD: 0x%x\n", l, h); - l = hpet_readl(HPET_CFG); - h = hpet_readl(HPET_STATUS); - printk(KERN_INFO "hpet: CFG: 0x%x, STATUS: 0x%x\n", l, h); + u32 i, id, period, cfg, status, channels, l, h; + + pr_info("%s(%d):\n", function, line); + + id = hpet_readl(HPET_ID); + period = hpet_readl(HPET_PERIOD); + pr_info("ID: 0x%x, PERIOD: 0x%x\n", id, period); + + cfg = hpet_readl(HPET_CFG); + status = hpet_readl(HPET_STATUS); + pr_info("CFG: 0x%x, STATUS: 0x%x\n", cfg, status); + l = hpet_readl(HPET_COUNTER); h = hpet_readl(HPET_COUNTER+4); - printk(KERN_INFO "hpet: COUNTER_l: 0x%x, COUNTER_h: 0x%x\n", l, h); + pr_info("COUNTER_l: 0x%x, COUNTER_h: 0x%x\n", l, h); + + channels = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; - for (i = 0; i < timers; i++) { + for (i = 0; i < channels; i++) { l = hpet_readl(HPET_Tn_CFG(i)); h = hpet_readl(HPET_Tn_CFG(i)+4); - printk(KERN_INFO "hpet: T%d: CFG_l: 0x%x, CFG_h: 0x%x\n", - i, l, h); + pr_info("T%d: CFG_l: 0x%x, CFG_h: 0x%x\n", i, l, h); + l = hpet_readl(HPET_Tn_CMP(i)); h = hpet_readl(HPET_Tn_CMP(i)+4); - printk(KERN_INFO "hpet: T%d: CMP_l: 0x%x, CMP_h: 0x%x\n", - i, l, h); + pr_info("T%d: CMP_l: 0x%x, CMP_h: 0x%x\n", i, l, h); + l = hpet_readl(HPET_Tn_ROUTE(i)); h = hpet_readl(HPET_Tn_ROUTE(i)+4); - printk(KERN_INFO "hpet: T%d ROUTE_l: 0x%x, ROUTE_h: 0x%x\n", - i, l, h); + pr_info("T%d ROUTE_l: 0x%x, ROUTE_h: 0x%x\n", i, l, h); } } @@ -172,31 +178,20 @@ do { \ } while (0) /* - * When the hpet driver (/dev/hpet) is enabled, we need to reserve + * When the HPET driver (/dev/hpet) is enabled, we need to reserve * timer 0 and timer 1 in case of RTC emulation. */ #ifdef CONFIG_HPET -static void hpet_reserve_msi_timers(struct hpet_data *hd); - -static void hpet_reserve_platform_timers(unsigned int id) +static void __init hpet_reserve_platform_timers(void) { - struct hpet __iomem *hpet = hpet_virt_address; - struct hpet_timer __iomem *timer = &hpet->hpet_timers[2]; - unsigned int nrtimers, i; struct hpet_data hd; - - nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; + unsigned int i; memset(&hd, 0, sizeof(hd)); hd.hd_phys_address = hpet_address; - hd.hd_address = hpet; - hd.hd_nirqs = nrtimers; - hpet_reserve_timer(&hd, 0); - -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif + hd.hd_address = hpet_virt_address; + hd.hd_nirqs = hpet_base.nr_channels; /* * NOTE that hd_irq[] reflects IOAPIC input pins (LEGACY_8254 @@ -206,30 +201,52 @@ static void hpet_reserve_platform_timers(unsigned int id) hd.hd_irq[0] = HPET_LEGACY_8254; hd.hd_irq[1] = HPET_LEGACY_RTC; - for (i = 2; i < nrtimers; timer++, i++) { - hd.hd_irq[i] = (readl(&timer->hpet_config) & - Tn_INT_ROUTE_CNF_MASK) >> Tn_INT_ROUTE_CNF_SHIFT; - } + for (i = 0; i < hpet_base.nr_channels; i++) { + struct hpet_channel *hc = hpet_base.channels + i; + + if (i >= 2) + hd.hd_irq[i] = hc->irq; - hpet_reserve_msi_timers(&hd); + switch (hc->mode) { + case HPET_MODE_UNUSED: + case HPET_MODE_DEVICE: + hc->mode = HPET_MODE_DEVICE; + break; + case HPET_MODE_CLOCKEVT: + case HPET_MODE_LEGACY: + hpet_reserve_timer(&hd, hc->num); + break; + } + } hpet_alloc(&hd); +} +static void __init hpet_select_device_channel(void) +{ + int i; + + for (i = 0; i < hpet_base.nr_channels; i++) { + struct hpet_channel *hc = hpet_base.channels + i; + + /* Associate the first unused channel to /dev/hpet */ + if (hc->mode == HPET_MODE_UNUSED) { + hc->mode = HPET_MODE_DEVICE; + return; + } + } } + #else -static void hpet_reserve_platform_timers(unsigned int id) { } +static inline void hpet_reserve_platform_timers(void) { } +static inline void hpet_select_device_channel(void) {} #endif -/* - * Common hpet info - */ -static unsigned long hpet_freq; - -static struct clock_event_device hpet_clockevent; - +/* Common HPET functions */ static void hpet_stop_counter(void) { u32 cfg = hpet_readl(HPET_CFG); + cfg &= ~HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); } @@ -243,6 +260,7 @@ static void hpet_reset_counter(void) static void hpet_start_counter(void) { unsigned int cfg = hpet_readl(HPET_CFG); + cfg |= HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); } @@ -274,24 +292,9 @@ static void hpet_enable_legacy_int(void) hpet_legacy_int_enabled = true; } -static void hpet_legacy_clockevent_register(void) -{ - /* Start HPET legacy interrupts */ - hpet_enable_legacy_int(); - - /* - * Start hpet with the boot cpu mask and make it - * global after the IO_APIC has been initialized. - */ - hpet_clockevent.cpumask = cpumask_of(boot_cpu_data.cpu_index); - clockevents_config_and_register(&hpet_clockevent, hpet_freq, - HPET_MIN_PROG_DELTA, 0x7FFFFFFF); - global_clock_event = &hpet_clockevent; - printk(KERN_DEBUG "hpet clockevent registered\n"); -} - -static int hpet_set_periodic(struct clock_event_device *evt, int timer) +static int hpet_clkevt_set_state_periodic(struct clock_event_device *evt) { + unsigned int channel = clockevent_to_channel(evt)->num; unsigned int cfg, cmp, now; uint64_t delta; @@ -300,11 +303,11 @@ static int hpet_set_periodic(struct clock_event_device *evt, int timer) delta >>= evt->shift; now = hpet_readl(HPET_COUNTER); cmp = now + (unsigned int)delta; - cfg = hpet_readl(HPET_Tn_CFG(timer)); + cfg = hpet_readl(HPET_Tn_CFG(channel)); cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | HPET_TN_32BIT; - hpet_writel(cfg, HPET_Tn_CFG(timer)); - hpet_writel(cmp, HPET_Tn_CMP(timer)); + hpet_writel(cfg, HPET_Tn_CFG(channel)); + hpet_writel(cmp, HPET_Tn_CMP(channel)); udelay(1); /* * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL @@ -313,52 +316,55 @@ static int hpet_set_periodic(struct clock_event_device *evt, int timer) * (See AMD-8111 HyperTransport I/O Hub Data Sheet, * Publication # 24674) */ - hpet_writel((unsigned int)delta, HPET_Tn_CMP(timer)); + hpet_writel((unsigned int)delta, HPET_Tn_CMP(channel)); hpet_start_counter(); hpet_print_config(); return 0; } -static int hpet_set_oneshot(struct clock_event_device *evt, int timer) +static int hpet_clkevt_set_state_oneshot(struct clock_event_device *evt) { + unsigned int channel = clockevent_to_channel(evt)->num; unsigned int cfg; - cfg = hpet_readl(HPET_Tn_CFG(timer)); + cfg = hpet_readl(HPET_Tn_CFG(channel)); cfg &= ~HPET_TN_PERIODIC; cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_Tn_CFG(timer)); + hpet_writel(cfg, HPET_Tn_CFG(channel)); return 0; } -static int hpet_shutdown(struct clock_event_device *evt, int timer) +static int hpet_clkevt_set_state_shutdown(struct clock_event_device *evt) { + unsigned int channel = clockevent_to_channel(evt)->num; unsigned int cfg; - cfg = hpet_readl(HPET_Tn_CFG(timer)); + cfg = hpet_readl(HPET_Tn_CFG(channel)); cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_Tn_CFG(timer)); + hpet_writel(cfg, HPET_Tn_CFG(channel)); return 0; } -static int hpet_resume(struct clock_event_device *evt) +static int hpet_clkevt_legacy_resume(struct clock_event_device *evt) { hpet_enable_legacy_int(); hpet_print_config(); return 0; } -static int hpet_next_event(unsigned long delta, - struct clock_event_device *evt, int timer) +static int +hpet_clkevt_set_next_event(unsigned long delta, struct clock_event_device *evt) { + unsigned int channel = clockevent_to_channel(evt)->num; u32 cnt; s32 res; cnt = hpet_readl(HPET_COUNTER); cnt += (u32) delta; - hpet_writel(cnt, HPET_Tn_CMP(timer)); + hpet_writel(cnt, HPET_Tn_CMP(channel)); /* * HPETs are a complete disaster. The compare register is @@ -387,360 +393,250 @@ static int hpet_next_event(unsigned long delta, return res < HPET_MIN_CYCLES ? -ETIME : 0; } -static int hpet_legacy_shutdown(struct clock_event_device *evt) +static void hpet_init_clockevent(struct hpet_channel *hc, unsigned int rating) { - return hpet_shutdown(evt, 0); -} + struct clock_event_device *evt = &hc->evt; -static int hpet_legacy_set_oneshot(struct clock_event_device *evt) -{ - return hpet_set_oneshot(evt, 0); -} + evt->rating = rating; + evt->irq = hc->irq; + evt->name = hc->name; + evt->cpumask = cpumask_of(hc->cpu); + evt->set_state_oneshot = hpet_clkevt_set_state_oneshot; + evt->set_next_event = hpet_clkevt_set_next_event; + evt->set_state_shutdown = hpet_clkevt_set_state_shutdown; -static int hpet_legacy_set_periodic(struct clock_event_device *evt) -{ - return hpet_set_periodic(evt, 0); + evt->features = CLOCK_EVT_FEAT_ONESHOT; + if (hc->boot_cfg & HPET_TN_PERIODIC) { + evt->features |= CLOCK_EVT_FEAT_PERIODIC; + evt->set_state_periodic = hpet_clkevt_set_state_periodic; + } } -static int hpet_legacy_resume(struct clock_event_device *evt) +static void __init hpet_legacy_clockevent_register(struct hpet_channel *hc) { - return hpet_resume(evt); -} + /* + * Start HPET with the boot CPU's cpumask and make it global after + * the IO_APIC has been initialized. + */ + hc->cpu = boot_cpu_data.cpu_index; + strncpy(hc->name, "hpet", sizeof(hc->name)); + hpet_init_clockevent(hc, 50); -static int hpet_legacy_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - return hpet_next_event(delta, evt, 0); -} + hc->evt.tick_resume = hpet_clkevt_legacy_resume; -/* - * The hpet clock event device - */ -static struct clock_event_device hpet_clockevent = { - .name = "hpet", - .features = CLOCK_EVT_FEAT_PERIODIC | - CLOCK_EVT_FEAT_ONESHOT, - .set_state_periodic = hpet_legacy_set_periodic, - .set_state_oneshot = hpet_legacy_set_oneshot, - .set_state_shutdown = hpet_legacy_shutdown, - .tick_resume = hpet_legacy_resume, - .set_next_event = hpet_legacy_next_event, - .irq = 0, - .rating = 50, -}; + /* + * Legacy horrors and sins from the past. HPET used periodic mode + * unconditionally forever on the legacy channel 0. Removing the + * below hack and using the conditional in hpet_init_clockevent() + * makes at least Qemu and one hardware machine fail to boot. + * There are two issues which cause the boot failure: + * + * #1 After the timer delivery test in IOAPIC and the IOAPIC setup + * the next interrupt is not delivered despite the HPET channel + * being programmed correctly. Reprogramming the HPET after + * switching to IOAPIC makes it work again. After fixing this, + * the next issue surfaces: + * + * #2 Due to the unconditional periodic mode availability the Local + * APIC timer calibration can hijack the global clockevents + * event handler without causing damage. Using oneshot at this + * stage makes if hang because the HPET does not get + * reprogrammed due to the handler hijacking. Duh, stupid me! + * + * Both issues require major surgery and especially the kick HPET + * again after enabling IOAPIC results in really nasty hackery. + * This 'assume periodic works' magic has survived since HPET + * support got added, so it's questionable whether this should be + * fixed. Both Qemu and the failing hardware machine support + * periodic mode despite the fact that both don't advertise it in + * the configuration register and both need that extra kick after + * switching to IOAPIC. Seems to be a feature... + */ + hc->evt.features |= CLOCK_EVT_FEAT_PERIODIC; + hc->evt.set_state_periodic = hpet_clkevt_set_state_periodic; + + /* Start HPET legacy interrupts */ + hpet_enable_legacy_int(); + + clockevents_config_and_register(&hc->evt, hpet_freq, + HPET_MIN_PROG_DELTA, 0x7FFFFFFF); + global_clock_event = &hc->evt; + pr_debug("Clockevent registered\n"); +} /* * HPET MSI Support */ #ifdef CONFIG_PCI_MSI -static DEFINE_PER_CPU(struct hpet_dev *, cpu_hpet_dev); -static struct hpet_dev *hpet_devs; -static struct irq_domain *hpet_domain; - void hpet_msi_unmask(struct irq_data *data) { - struct hpet_dev *hdev = irq_data_get_irq_handler_data(data); + struct hpet_channel *hc = irq_data_get_irq_handler_data(data); unsigned int cfg; - /* unmask it */ - cfg = hpet_readl(HPET_Tn_CFG(hdev->num)); + cfg = hpet_readl(HPET_Tn_CFG(hc->num)); cfg |= HPET_TN_ENABLE | HPET_TN_FSB; - hpet_writel(cfg, HPET_Tn_CFG(hdev->num)); + hpet_writel(cfg, HPET_Tn_CFG(hc->num)); } void hpet_msi_mask(struct irq_data *data) { - struct hpet_dev *hdev = irq_data_get_irq_handler_data(data); + struct hpet_channel *hc = irq_data_get_irq_handler_data(data); unsigned int cfg; - /* mask it */ - cfg = hpet_readl(HPET_Tn_CFG(hdev->num)); + cfg = hpet_readl(HPET_Tn_CFG(hc->num)); cfg &= ~(HPET_TN_ENABLE | HPET_TN_FSB); - hpet_writel(cfg, HPET_Tn_CFG(hdev->num)); -} - -void hpet_msi_write(struct hpet_dev *hdev, struct msi_msg *msg) -{ - hpet_writel(msg->data, HPET_Tn_ROUTE(hdev->num)); - hpet_writel(msg->address_lo, HPET_Tn_ROUTE(hdev->num) + 4); + hpet_writel(cfg, HPET_Tn_CFG(hc->num)); } -void hpet_msi_read(struct hpet_dev *hdev, struct msi_msg *msg) +void hpet_msi_write(struct hpet_channel *hc, struct msi_msg *msg) { - msg->data = hpet_readl(HPET_Tn_ROUTE(hdev->num)); - msg->address_lo = hpet_readl(HPET_Tn_ROUTE(hdev->num) + 4); - msg->address_hi = 0; + hpet_writel(msg->data, HPET_Tn_ROUTE(hc->num)); + hpet_writel(msg->address_lo, HPET_Tn_ROUTE(hc->num) + 4); } -static int hpet_msi_shutdown(struct clock_event_device *evt) +static int hpet_clkevt_msi_resume(struct clock_event_device *evt) { - struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt); - - return hpet_shutdown(evt, hdev->num); -} - -static int hpet_msi_set_oneshot(struct clock_event_device *evt) -{ - struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt); - - return hpet_set_oneshot(evt, hdev->num); -} - -static int hpet_msi_set_periodic(struct clock_event_device *evt) -{ - struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt); - - return hpet_set_periodic(evt, hdev->num); -} - -static int hpet_msi_resume(struct clock_event_device *evt) -{ - struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt); - struct irq_data *data = irq_get_irq_data(hdev->irq); + struct hpet_channel *hc = clockevent_to_channel(evt); + struct irq_data *data = irq_get_irq_data(hc->irq); struct msi_msg msg; /* Restore the MSI msg and unmask the interrupt */ irq_chip_compose_msi_msg(data, &msg); - hpet_msi_write(hdev, &msg); + hpet_msi_write(hc, &msg); hpet_msi_unmask(data); return 0; } -static int hpet_msi_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt); - return hpet_next_event(delta, evt, hdev->num); -} - -static irqreturn_t hpet_interrupt_handler(int irq, void *data) +static irqreturn_t hpet_msi_interrupt_handler(int irq, void *data) { - struct hpet_dev *dev = (struct hpet_dev *)data; - struct clock_event_device *hevt = &dev->evt; + struct hpet_channel *hc = data; + struct clock_event_device *evt = &hc->evt; - if (!hevt->event_handler) { - printk(KERN_INFO "Spurious HPET timer interrupt on HPET timer %d\n", - dev->num); + if (!evt->event_handler) { + pr_info("Spurious interrupt HPET channel %d\n", hc->num); return IRQ_HANDLED; } - hevt->event_handler(hevt); + evt->event_handler(evt); return IRQ_HANDLED; } -static int hpet_setup_irq(struct hpet_dev *dev) +static int hpet_setup_msi_irq(struct hpet_channel *hc) { - - if (request_irq(dev->irq, hpet_interrupt_handler, + if (request_irq(hc->irq, hpet_msi_interrupt_handler, IRQF_TIMER | IRQF_NOBALANCING, - dev->name, dev)) + hc->name, hc)) return -1; - disable_irq(dev->irq); - irq_set_affinity(dev->irq, cpumask_of(dev->cpu)); - enable_irq(dev->irq); + disable_irq(hc->irq); + irq_set_affinity(hc->irq, cpumask_of(hc->cpu)); + enable_irq(hc->irq); - printk(KERN_DEBUG "hpet: %s irq %d for MSI\n", - dev->name, dev->irq); + pr_debug("%s irq %u for MSI\n", hc->name, hc->irq); return 0; } -/* This should be called in specific @cpu */ -static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu) +/* Invoked from the hotplug callback on @cpu */ +static void init_one_hpet_msi_clockevent(struct hpet_channel *hc, int cpu) { - struct clock_event_device *evt = &hdev->evt; - - WARN_ON(cpu != smp_processor_id()); - if (!(hdev->flags & HPET_DEV_VALID)) - return; - - hdev->cpu = cpu; - per_cpu(cpu_hpet_dev, cpu) = hdev; - evt->name = hdev->name; - hpet_setup_irq(hdev); - evt->irq = hdev->irq; + struct clock_event_device *evt = &hc->evt; - evt->rating = 110; - evt->features = CLOCK_EVT_FEAT_ONESHOT; - if (hdev->flags & HPET_DEV_PERI_CAP) { - evt->features |= CLOCK_EVT_FEAT_PERIODIC; - evt->set_state_periodic = hpet_msi_set_periodic; - } + hc->cpu = cpu; + per_cpu(cpu_hpet_channel, cpu) = hc; + hpet_setup_msi_irq(hc); - evt->set_state_shutdown = hpet_msi_shutdown; - evt->set_state_oneshot = hpet_msi_set_oneshot; - evt->tick_resume = hpet_msi_resume; - evt->set_next_event = hpet_msi_next_event; - evt->cpumask = cpumask_of(hdev->cpu); + hpet_init_clockevent(hc, 110); + evt->tick_resume = hpet_clkevt_msi_resume; clockevents_config_and_register(evt, hpet_freq, HPET_MIN_PROG_DELTA, 0x7FFFFFFF); } -#ifdef CONFIG_HPET -/* Reserve at least one timer for userspace (/dev/hpet) */ -#define RESERVE_TIMERS 1 -#else -#define RESERVE_TIMERS 0 -#endif - -static void hpet_msi_capability_lookup(unsigned int start_timer) +static struct hpet_channel *hpet_get_unused_clockevent(void) { - unsigned int id; - unsigned int num_timers; - unsigned int num_timers_used = 0; - int i, irq; - - if (hpet_msi_disable) - return; - - if (boot_cpu_has(X86_FEATURE_ARAT)) - return; - id = hpet_readl(HPET_ID); - - num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT); - num_timers++; /* Value read out starts from 0 */ - hpet_print_config(); - - hpet_domain = hpet_create_irq_domain(hpet_blockid); - if (!hpet_domain) - return; - - hpet_devs = kcalloc(num_timers, sizeof(struct hpet_dev), GFP_KERNEL); - if (!hpet_devs) - return; - - hpet_num_timers = num_timers; - - for (i = start_timer; i < num_timers - RESERVE_TIMERS; i++) { - struct hpet_dev *hdev = &hpet_devs[num_timers_used]; - unsigned int cfg = hpet_readl(HPET_Tn_CFG(i)); - - /* Only consider HPET timer with MSI support */ - if (!(cfg & HPET_TN_FSB_CAP)) - continue; + int i; - hdev->flags = 0; - if (cfg & HPET_TN_PERIODIC_CAP) - hdev->flags |= HPET_DEV_PERI_CAP; - sprintf(hdev->name, "hpet%d", i); - hdev->num = i; + for (i = 0; i < hpet_base.nr_channels; i++) { + struct hpet_channel *hc = hpet_base.channels + i; - irq = hpet_assign_irq(hpet_domain, hdev, hdev->num); - if (irq <= 0) + if (hc->mode != HPET_MODE_CLOCKEVT || hc->in_use) continue; - - hdev->irq = irq; - hdev->flags |= HPET_DEV_FSB_CAP; - hdev->flags |= HPET_DEV_VALID; - num_timers_used++; - if (num_timers_used == num_possible_cpus()) - break; + hc->in_use = 1; + return hc; } - - printk(KERN_INFO "HPET: %d timers in total, %d timers will be used for per-cpu timer\n", - num_timers, num_timers_used); + return NULL; } -#ifdef CONFIG_HPET -static void hpet_reserve_msi_timers(struct hpet_data *hd) +static int hpet_cpuhp_online(unsigned int cpu) { - int i; - - if (!hpet_devs) - return; + struct hpet_channel *hc = hpet_get_unused_clockevent(); - for (i = 0; i < hpet_num_timers; i++) { - struct hpet_dev *hdev = &hpet_devs[i]; + if (hc) + init_one_hpet_msi_clockevent(hc, cpu); + return 0; +} - if (!(hdev->flags & HPET_DEV_VALID)) - continue; +static int hpet_cpuhp_dead(unsigned int cpu) +{ + struct hpet_channel *hc = per_cpu(cpu_hpet_channel, cpu); - hd->hd_irq[hdev->num] = hdev->irq; - hpet_reserve_timer(hd, hdev->num); - } + if (!hc) + return 0; + free_irq(hc->irq, hc); + hc->in_use = 0; + per_cpu(cpu_hpet_channel, cpu) = NULL; + return 0; } -#endif -static struct hpet_dev *hpet_get_unused_timer(void) +static void __init hpet_select_clockevents(void) { - int i; + unsigned int i; - if (!hpet_devs) - return NULL; + hpet_base.nr_clockevents = 0; - for (i = 0; i < hpet_num_timers; i++) { - struct hpet_dev *hdev = &hpet_devs[i]; + /* No point if MSI is disabled or CPU has an Always Runing APIC Timer */ + if (hpet_msi_disable || boot_cpu_has(X86_FEATURE_ARAT)) + return; - if (!(hdev->flags & HPET_DEV_VALID)) - continue; - if (test_and_set_bit(HPET_DEV_USED_BIT, - (unsigned long *)&hdev->flags)) - continue; - return hdev; - } - return NULL; -} + hpet_print_config(); -struct hpet_work_struct { - struct delayed_work work; - struct completion complete; -}; + hpet_domain = hpet_create_irq_domain(hpet_blockid); + if (!hpet_domain) + return; -static void hpet_work(struct work_struct *w) -{ - struct hpet_dev *hdev; - int cpu = smp_processor_id(); - struct hpet_work_struct *hpet_work; + for (i = 0; i < hpet_base.nr_channels; i++) { + struct hpet_channel *hc = hpet_base.channels + i; + int irq; - hpet_work = container_of(w, struct hpet_work_struct, work.work); + if (hc->mode != HPET_MODE_UNUSED) + continue; - hdev = hpet_get_unused_timer(); - if (hdev) - init_one_hpet_msi_clockevent(hdev, cpu); + /* Only consider HPET channel with MSI support */ + if (!(hc->boot_cfg & HPET_TN_FSB_CAP)) + continue; - complete(&hpet_work->complete); -} + sprintf(hc->name, "hpet%d", i); -static int hpet_cpuhp_online(unsigned int cpu) -{ - struct hpet_work_struct work; - - INIT_DELAYED_WORK_ONSTACK(&work.work, hpet_work); - init_completion(&work.complete); - /* FIXME: add schedule_work_on() */ - schedule_delayed_work_on(cpu, &work.work, 0); - wait_for_completion(&work.complete); - destroy_delayed_work_on_stack(&work.work); - return 0; -} + irq = hpet_assign_irq(hpet_domain, hc, hc->num); + if (irq <= 0) + continue; -static int hpet_cpuhp_dead(unsigned int cpu) -{ - struct hpet_dev *hdev = per_cpu(cpu_hpet_dev, cpu); + hc->irq = irq; + hc->mode = HPET_MODE_CLOCKEVT; - if (!hdev) - return 0; - free_irq(hdev->irq, hdev); - hdev->flags &= ~HPET_DEV_USED; - per_cpu(cpu_hpet_dev, cpu) = NULL; - return 0; -} -#else + if (++hpet_base.nr_clockevents == num_possible_cpus()) + break; + } -static void hpet_msi_capability_lookup(unsigned int start_timer) -{ - return; + pr_info("%d channels of %d reserved for per-cpu timers\n", + hpet_base.nr_channels, hpet_base.nr_clockevents); } -#ifdef CONFIG_HPET -static void hpet_reserve_msi_timers(struct hpet_data *hd) -{ - return; -} -#endif +#else + +static inline void hpet_select_clockevents(void) { } #define hpet_cpuhp_online NULL #define hpet_cpuhp_dead NULL @@ -754,10 +650,10 @@ static void hpet_reserve_msi_timers(struct hpet_data *hd) /* * Reading the HPET counter is a very slow operation. If a large number of * CPUs are trying to access the HPET counter simultaneously, it can cause - * massive delay and slow down system performance dramatically. This may + * massive delays and slow down system performance dramatically. This may * happen when HPET is the default clock source instead of TSC. For a * really large system with hundreds of CPUs, the slowdown may be so - * severe that it may actually crash the system because of a NMI watchdog + * severe, that it can actually crash the system because of a NMI watchdog * soft lockup, for example. * * If multiple CPUs are trying to access the HPET counter at the same time, @@ -766,10 +662,9 @@ static void hpet_reserve_msi_timers(struct hpet_data *hd) * * This special feature is only enabled on x86-64 systems. It is unlikely * that 32-bit x86 systems will have enough CPUs to require this feature - * with its associated locking overhead. And we also need 64-bit atomic - * read. + * with its associated locking overhead. We also need 64-bit atomic read. * - * The lock and the hpet value are stored together and can be read in a + * The lock and the HPET value are stored together and can be read in a * single atomic 64-bit read. It is explicitly assumed that arch_spinlock_t * is 32 bits in size. */ @@ -858,15 +753,40 @@ static struct clocksource clocksource_hpet = { .resume = hpet_resume_counter, }; -static int hpet_clocksource_register(void) +/* + * AMD SB700 based systems with spread spectrum enabled use a SMM based + * HPET emulation to provide proper frequency setting. + * + * On such systems the SMM code is initialized with the first HPET register + * access and takes some time to complete. During this time the config + * register reads 0xffffffff. We check for max 1000 loops whether the + * config register reads a non-0xffffffff value to make sure that the + * HPET is up and running before we proceed any further. + * + * A counting loop is safe, as the HPET access takes thousands of CPU cycles. + * + * On non-SB700 based machines this check is only done once and has no + * side effects. + */ +static bool __init hpet_cfg_working(void) { - u64 start, now; - u64 t1; + int i; + + for (i = 0; i < 1000; i++) { + if (hpet_readl(HPET_CFG) != 0xFFFFFFFF) + return true; + } + + pr_warn("Config register invalid. Disabling HPET\n"); + return false; +} + +static bool __init hpet_counting(void) +{ + u64 start, now, t1; - /* Start the counter */ hpet_restart_counter(); - /* Verify whether hpet counter works */ t1 = hpet_readl(HPET_COUNTER); start = rdtsc(); @@ -877,30 +797,24 @@ static int hpet_clocksource_register(void) * 1 GHz == 200us */ do { - rep_nop(); + if (t1 != hpet_readl(HPET_COUNTER)) + return true; now = rdtsc(); } while ((now - start) < 200000UL); - if (t1 == hpet_readl(HPET_COUNTER)) { - printk(KERN_WARNING - "HPET counter not counting. HPET disabled\n"); - return -ENODEV; - } - - clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq); - return 0; + pr_warn("Counter not counting. HPET disabled\n"); + return false; } -static u32 *hpet_boot_cfg; - /** * hpet_enable - Try to setup the HPET timer. Returns 1 on success. */ int __init hpet_enable(void) { - u32 hpet_period, cfg, id; + u32 hpet_period, cfg, id, irq; + unsigned int i, channels; + struct hpet_channel *hc; u64 freq; - unsigned int i, last; if (!is_hpet_capable()) return 0; @@ -909,40 +823,22 @@ int __init hpet_enable(void) if (!hpet_virt_address) return 0; + /* Validate that the config register is working */ + if (!hpet_cfg_working()) + goto out_nohpet; + + /* Validate that the counter is counting */ + if (!hpet_counting()) + goto out_nohpet; + /* * Read the period and check for a sane value: */ hpet_period = hpet_readl(HPET_PERIOD); - - /* - * AMD SB700 based systems with spread spectrum enabled use a - * SMM based HPET emulation to provide proper frequency - * setting. The SMM code is initialized with the first HPET - * register access and takes some time to complete. During - * this time the config register reads 0xffffffff. We check - * for max. 1000 loops whether the config register reads a non - * 0xffffffff value to make sure that HPET is up and running - * before we go further. A counting loop is safe, as the HPET - * access takes thousands of CPU cycles. On non SB700 based - * machines this check is only done once and has no side - * effects. - */ - for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) { - if (i == 1000) { - printk(KERN_WARNING - "HPET config register value = 0xFFFFFFFF. " - "Disabling HPET\n"); - goto out_nohpet; - } - } - if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) goto out_nohpet; - /* - * The period is a femto seconds value. Convert it to a - * frequency. - */ + /* The period is a femtoseconds value. Convert it to a frequency. */ freq = FSEC_PER_SEC; do_div(freq, hpet_period); hpet_freq = freq; @@ -954,72 +850,90 @@ int __init hpet_enable(void) id = hpet_readl(HPET_ID); hpet_print_config(); - last = (id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; + /* This is the HPET channel number which is zero based */ + channels = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; -#ifdef CONFIG_HPET_EMULATE_RTC /* * The legacy routing mode needs at least two channels, tick timer * and the rtc emulation channel. */ - if (!last) + if (IS_ENABLED(CONFIG_HPET_EMULATE_RTC) && channels < 2) goto out_nohpet; -#endif + hc = kcalloc(channels, sizeof(*hc), GFP_KERNEL); + if (!hc) { + pr_warn("Disabling HPET.\n"); + goto out_nohpet; + } + hpet_base.channels = hc; + hpet_base.nr_channels = channels; + + /* Read, store and sanitize the global configuration */ cfg = hpet_readl(HPET_CFG); - hpet_boot_cfg = kmalloc_array(last + 2, sizeof(*hpet_boot_cfg), - GFP_KERNEL); - if (hpet_boot_cfg) - *hpet_boot_cfg = cfg; - else - pr_warn("HPET initial state will not be saved\n"); + hpet_base.boot_cfg = cfg; cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY); hpet_writel(cfg, HPET_CFG); if (cfg) - pr_warn("Unrecognized bits %#x set in global cfg\n", cfg); + pr_warn("Global config: Unknown bits %#x\n", cfg); + + /* Read, store and sanitize the per channel configuration */ + for (i = 0; i < channels; i++, hc++) { + hc->num = i; - for (i = 0; i <= last; ++i) { cfg = hpet_readl(HPET_Tn_CFG(i)); - if (hpet_boot_cfg) - hpet_boot_cfg[i + 1] = cfg; + hc->boot_cfg = cfg; + irq = (cfg & Tn_INT_ROUTE_CNF_MASK) >> Tn_INT_ROUTE_CNF_SHIFT; + hc->irq = irq; + cfg &= ~(HPET_TN_ENABLE | HPET_TN_LEVEL | HPET_TN_FSB); hpet_writel(cfg, HPET_Tn_CFG(i)); + cfg &= ~(HPET_TN_PERIODIC | HPET_TN_PERIODIC_CAP | HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE | HPET_TN_FSB | HPET_TN_FSB_CAP); if (cfg) - pr_warn("Unrecognized bits %#x set in cfg#%u\n", - cfg, i); + pr_warn("Channel #%u config: Unknown bits %#x\n", i, cfg); } hpet_print_config(); - if (hpet_clocksource_register()) - goto out_nohpet; + clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq); if (id & HPET_ID_LEGSUP) { - hpet_legacy_clockevent_register(); + hpet_legacy_clockevent_register(&hpet_base.channels[0]); + hpet_base.channels[0].mode = HPET_MODE_LEGACY; + if (IS_ENABLED(CONFIG_HPET_EMULATE_RTC)) + hpet_base.channels[1].mode = HPET_MODE_LEGACY; return 1; } return 0; out_nohpet: + kfree(hpet_base.channels); + hpet_base.channels = NULL; + hpet_base.nr_channels = 0; hpet_clear_mapping(); hpet_address = 0; return 0; } /* - * Needs to be late, as the reserve_timer code calls kalloc ! + * The late initialization runs after the PCI quirks have been invoked + * which might have detected a system on which the HPET can be enforced. + * + * Also, the MSI machinery is not working yet when the HPET is initialized + * early. * - * Not a problem on i386 as hpet_enable is called from late_time_init, - * but on x86_64 it is necessary ! + * If the HPET is enabled, then: + * + * 1) Reserve one channel for /dev/hpet if CONFIG_HPET=y + * 2) Reserve up to num_possible_cpus() channels as per CPU clockevents + * 3) Setup /dev/hpet if CONFIG_HPET=y + * 4) Register hotplug callbacks when clockevents are available */ static __init int hpet_late_init(void) { int ret; - if (boot_hpet_disable) - return -ENODEV; - if (!hpet_address) { if (!force_hpet_address) return -ENODEV; @@ -1031,21 +945,14 @@ static __init int hpet_late_init(void) if (!hpet_virt_address) return -ENODEV; - if (hpet_readl(HPET_ID) & HPET_ID_LEGSUP) - hpet_msi_capability_lookup(2); - else - hpet_msi_capability_lookup(0); - - hpet_reserve_platform_timers(hpet_readl(HPET_ID)); + hpet_select_device_channel(); + hpet_select_clockevents(); + hpet_reserve_platform_timers(); hpet_print_config(); - if (hpet_msi_disable) + if (!hpet_base.nr_clockevents) return 0; - if (boot_cpu_has(X86_FEATURE_ARAT)) - return 0; - - /* This notifier should be called after workqueue is ready */ ret = cpuhp_setup_state(CPUHP_AP_X86_HPET_ONLINE, "x86/hpet:online", hpet_cpuhp_online, NULL); if (ret) @@ -1064,47 +971,47 @@ fs_initcall(hpet_late_init); void hpet_disable(void) { - if (is_hpet_capable() && hpet_virt_address) { - unsigned int cfg = hpet_readl(HPET_CFG), id, last; - - if (hpet_boot_cfg) - cfg = *hpet_boot_cfg; - else if (hpet_legacy_int_enabled) { - cfg &= ~HPET_CFG_LEGACY; - hpet_legacy_int_enabled = false; - } - cfg &= ~HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); + unsigned int i; + u32 cfg; - if (!hpet_boot_cfg) - return; + if (!is_hpet_capable() || !hpet_virt_address) + return; - id = hpet_readl(HPET_ID); - last = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT); + /* Restore boot configuration with the enable bit cleared */ + cfg = hpet_base.boot_cfg; + cfg &= ~HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); - for (id = 0; id <= last; ++id) - hpet_writel(hpet_boot_cfg[id + 1], HPET_Tn_CFG(id)); + /* Restore the channel boot configuration */ + for (i = 0; i < hpet_base.nr_channels; i++) + hpet_writel(hpet_base.channels[i].boot_cfg, HPET_Tn_CFG(i)); - if (*hpet_boot_cfg & HPET_CFG_ENABLE) - hpet_writel(*hpet_boot_cfg, HPET_CFG); - } + /* If the HPET was enabled at boot time, reenable it */ + if (hpet_base.boot_cfg & HPET_CFG_ENABLE) + hpet_writel(hpet_base.boot_cfg, HPET_CFG); } #ifdef CONFIG_HPET_EMULATE_RTC -/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET +/* + * HPET in LegacyReplacement mode eats up the RTC interrupt line. When HPET * is enabled, we support RTC interrupt functionality in software. + * * RTC has 3 kinds of interrupts: - * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock - * is updated - * 2) Alarm Interrupt - generate an interrupt at a specific time of day - * 3) Periodic Interrupt - generate periodic interrupt, with frequencies - * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) - * (1) and (2) above are implemented using polling at a frequency of - * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt - * overhead. (DEFAULT_RTC_INT_FREQ) - * For (3), we use interrupts at 64Hz or user specified periodic - * frequency, whichever is higher. + * + * 1) Update Interrupt - generate an interrupt, every second, when the + * RTC clock is updated + * 2) Alarm Interrupt - generate an interrupt at a specific time of day + * 3) Periodic Interrupt - generate periodic interrupt, with frequencies + * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all frequencies in powers of 2) + * + * (1) and (2) above are implemented using polling at a frequency of 64 Hz: + * DEFAULT_RTC_INT_FREQ. + * + * The exact frequency is a tradeoff between accuracy and interrupt overhead. + * + * For (3), we use interrupts at 64 Hz, or the user specified periodic frequency, + * if it's higher. */ #include <linux/mc146818rtc.h> #include <linux/rtc.h> @@ -1125,7 +1032,7 @@ static unsigned long hpet_pie_limit; static rtc_irq_handler irq_handler; /* - * Check that the hpet counter c1 is ahead of the c2 + * Check that the HPET counter c1 is ahead of c2 */ static inline int hpet_cnt_ahead(u32 c1, u32 c2) { @@ -1163,8 +1070,8 @@ void hpet_unregister_irq_handler(rtc_irq_handler handler) EXPORT_SYMBOL_GPL(hpet_unregister_irq_handler); /* - * Timer 1 for RTC emulation. We use one shot mode, as periodic mode - * is not supported by all HPET implementations for timer 1. + * Channel 1 for RTC emulation. We use one shot mode, as periodic mode + * is not supported by all HPET implementations for channel 1. * * hpet_rtc_timer_init() is called when the rtc is initialized. */ @@ -1177,10 +1084,11 @@ int hpet_rtc_timer_init(void) return 0; if (!hpet_default_delta) { + struct clock_event_device *evt = &hpet_base.channels[0].evt; uint64_t clc; - clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; - clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT; + clc = (uint64_t) evt->mult * NSEC_PER_SEC; + clc >>= evt->shift + DEFAULT_RTC_SHIFT; hpet_default_delta = clc; } @@ -1209,6 +1117,7 @@ EXPORT_SYMBOL_GPL(hpet_rtc_timer_init); static void hpet_disable_rtc_channel(void) { u32 cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; hpet_writel(cfg, HPET_T1_CFG); } @@ -1250,8 +1159,7 @@ int hpet_set_rtc_irq_bit(unsigned long bit_mask) } EXPORT_SYMBOL_GPL(hpet_set_rtc_irq_bit); -int hpet_set_alarm_time(unsigned char hrs, unsigned char min, - unsigned char sec) +int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) { if (!is_hpet_enabled()) return 0; @@ -1271,15 +1179,18 @@ int hpet_set_periodic_freq(unsigned long freq) if (!is_hpet_enabled()) return 0; - if (freq <= DEFAULT_RTC_INT_FREQ) + if (freq <= DEFAULT_RTC_INT_FREQ) { hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq; - else { - clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; + } else { + struct clock_event_device *evt = &hpet_base.channels[0].evt; + + clc = (uint64_t) evt->mult * NSEC_PER_SEC; do_div(clc, freq); - clc >>= hpet_clockevent.shift; + clc >>= evt->shift; hpet_pie_delta = clc; hpet_pie_limit = 0; } + return 1; } EXPORT_SYMBOL_GPL(hpet_set_periodic_freq); @@ -1317,8 +1228,7 @@ static void hpet_rtc_timer_reinit(void) if (hpet_rtc_flags & RTC_PIE) hpet_pie_count += lost_ints; if (printk_ratelimit()) - printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n", - lost_ints); + pr_warn("Lost %d RTC interrupts\n", lost_ints); } } @@ -1340,8 +1250,7 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) hpet_prev_update_sec = curr_time.tm_sec; } - if (hpet_rtc_flags & RTC_PIE && - ++hpet_pie_count >= hpet_pie_limit) { + if (hpet_rtc_flags & RTC_PIE && ++hpet_pie_count >= hpet_pie_limit) { rtc_int_flag |= RTC_PF; hpet_pie_count = 0; } @@ -1350,7 +1259,7 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) (curr_time.tm_sec == hpet_alarm_time.tm_sec) && (curr_time.tm_min == hpet_alarm_time.tm_min) && (curr_time.tm_hour == hpet_alarm_time.tm_hour)) - rtc_int_flag |= RTC_AF; + rtc_int_flag |= RTC_AF; if (rtc_int_flag) { rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); |