diff options
-rw-r--r-- | drivers/crypto/bcm/cipher.c | 96 | ||||
-rw-r--r-- | drivers/crypto/bcm/cipher.h | 1 | ||||
-rw-r--r-- | drivers/crypto/bcm/spu.c | 23 | ||||
-rw-r--r-- | drivers/crypto/bcm/spu.h | 1 | ||||
-rw-r--r-- | drivers/crypto/bcm/spu2.c | 12 | ||||
-rw-r--r-- | drivers/crypto/bcm/spu2.h | 1 |
6 files changed, 6 insertions, 128 deletions
diff --git a/drivers/crypto/bcm/cipher.c b/drivers/crypto/bcm/cipher.c index 8a7fa1ae1ade..5d38b87b9d77 100644 --- a/drivers/crypto/bcm/cipher.c +++ b/drivers/crypto/bcm/cipher.c @@ -165,10 +165,6 @@ spu_skcipher_rx_sg_create(struct brcm_message *mssg, return -EFAULT; } - if (ctx->cipher.alg == CIPHER_ALG_RC4) - /* Add buffer to catch 260-byte SUPDT field for RC4 */ - sg_set_buf(sg++, rctx->msg_buf.c.supdt_tweak, SPU_SUPDT_LEN); - if (stat_pad_len) sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len); @@ -317,7 +313,6 @@ static int handle_skcipher_req(struct iproc_reqctx_s *rctx) u8 local_iv_ctr[MAX_IV_SIZE]; u32 stat_pad_len; /* num bytes to align status field */ u32 pad_len; /* total length of all padding */ - bool update_key = false; struct brcm_message *mssg; /* mailbox message */ /* number of entries in src and dst sg in mailbox message. */ @@ -391,28 +386,6 @@ static int handle_skcipher_req(struct iproc_reqctx_s *rctx) } } - if (ctx->cipher.alg == CIPHER_ALG_RC4) { - rx_frag_num++; - if (chunk_start) { - /* - * for non-first RC4 chunks, use SUPDT from previous - * response as key for this chunk. - */ - cipher_parms.key_buf = rctx->msg_buf.c.supdt_tweak; - update_key = true; - cipher_parms.type = CIPHER_TYPE_UPDT; - } else if (!rctx->is_encrypt) { - /* - * First RC4 chunk. For decrypt, key in pre-built msg - * header may have been changed if encrypt required - * multiple chunks. So revert the key to the - * ctx->enckey value. - */ - update_key = true; - cipher_parms.type = CIPHER_TYPE_INIT; - } - } - if (ctx->max_payload == SPU_MAX_PAYLOAD_INF) flow_log("max_payload infinite\n"); else @@ -425,14 +398,9 @@ static int handle_skcipher_req(struct iproc_reqctx_s *rctx) memcpy(rctx->msg_buf.bcm_spu_req_hdr, ctx->bcm_spu_req_hdr, sizeof(rctx->msg_buf.bcm_spu_req_hdr)); - /* - * Pass SUPDT field as key. Key field in finish() call is only used - * when update_key has been set above for RC4. Will be ignored in - * all other cases. - */ spu->spu_cipher_req_finish(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN, ctx->spu_req_hdr_len, !(rctx->is_encrypt), - &cipher_parms, update_key, chunksize); + &cipher_parms, chunksize); atomic64_add(chunksize, &iproc_priv.bytes_out); @@ -527,9 +495,6 @@ static void handle_skcipher_resp(struct iproc_reqctx_s *rctx) __func__, rctx->total_received, payload_len); dump_sg(req->dst, rctx->total_received, payload_len); - if (ctx->cipher.alg == CIPHER_ALG_RC4) - packet_dump(" supdt ", rctx->msg_buf.c.supdt_tweak, - SPU_SUPDT_LEN); rctx->total_received += payload_len; if (rctx->total_received == rctx->total_todo) { @@ -1853,26 +1818,6 @@ static int aes_setkey(struct crypto_skcipher *cipher, const u8 *key, return 0; } -static int rc4_setkey(struct crypto_skcipher *cipher, const u8 *key, - unsigned int keylen) -{ - struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher); - int i; - - ctx->enckeylen = ARC4_MAX_KEY_SIZE + ARC4_STATE_SIZE; - - ctx->enckey[0] = 0x00; /* 0x00 */ - ctx->enckey[1] = 0x00; /* i */ - ctx->enckey[2] = 0x00; /* 0x00 */ - ctx->enckey[3] = 0x00; /* j */ - for (i = 0; i < ARC4_MAX_KEY_SIZE; i++) - ctx->enckey[i + ARC4_STATE_SIZE] = key[i % keylen]; - - ctx->cipher_type = CIPHER_TYPE_INIT; - - return 0; -} - static int skcipher_setkey(struct crypto_skcipher *cipher, const u8 *key, unsigned int keylen) { @@ -1895,9 +1840,6 @@ static int skcipher_setkey(struct crypto_skcipher *cipher, const u8 *key, case CIPHER_ALG_AES: err = aes_setkey(cipher, key, keylen); break; - case CIPHER_ALG_RC4: - err = rc4_setkey(cipher, key, keylen); - break; default: pr_err("%s() Error: unknown cipher alg\n", __func__); err = -EINVAL; @@ -1905,11 +1847,9 @@ static int skcipher_setkey(struct crypto_skcipher *cipher, const u8 *key, if (err) return err; - /* RC4 already populated ctx->enkey */ - if (ctx->cipher.alg != CIPHER_ALG_RC4) { - memcpy(ctx->enckey, key, keylen); - ctx->enckeylen = keylen; - } + memcpy(ctx->enckey, key, keylen); + ctx->enckeylen = keylen; + /* SPU needs XTS keys in the reverse order the crypto API presents */ if ((ctx->cipher.alg == CIPHER_ALG_AES) && (ctx->cipher.mode == CIPHER_MODE_XTS)) { @@ -2872,9 +2812,6 @@ static int aead_authenc_setkey(struct crypto_aead *cipher, goto badkey; } break; - case CIPHER_ALG_RC4: - ctx->cipher_type = CIPHER_TYPE_INIT; - break; default: pr_err("%s() Error: Unknown cipher alg\n", __func__); return -EINVAL; @@ -3606,25 +3543,6 @@ static struct iproc_alg_s driver_algs[] = { { .type = CRYPTO_ALG_TYPE_SKCIPHER, .alg.skcipher = { - .base.cra_name = "ecb(arc4)", - .base.cra_driver_name = "ecb-arc4-iproc", - .base.cra_blocksize = ARC4_BLOCK_SIZE, - .min_keysize = ARC4_MIN_KEY_SIZE, - .max_keysize = ARC4_MAX_KEY_SIZE, - .ivsize = 0, - }, - .cipher_info = { - .alg = CIPHER_ALG_RC4, - .mode = CIPHER_MODE_NONE, - }, - .auth_info = { - .alg = HASH_ALG_NONE, - .mode = HASH_MODE_NONE, - }, - }, - { - .type = CRYPTO_ALG_TYPE_SKCIPHER, - .alg.skcipher = { .base.cra_name = "ofb(des)", .base.cra_driver_name = "ofb-des-iproc", .base.cra_blocksize = DES_BLOCK_SIZE, @@ -4526,15 +4444,9 @@ static void spu_counters_init(void) static int spu_register_skcipher(struct iproc_alg_s *driver_alg) { - struct spu_hw *spu = &iproc_priv.spu; struct skcipher_alg *crypto = &driver_alg->alg.skcipher; int err; - /* SPU2 does not support RC4 */ - if ((driver_alg->cipher_info.alg == CIPHER_ALG_RC4) && - (spu->spu_type == SPU_TYPE_SPU2)) - return 0; - crypto->base.cra_module = THIS_MODULE; crypto->base.cra_priority = cipher_pri; crypto->base.cra_alignmask = 0; diff --git a/drivers/crypto/bcm/cipher.h b/drivers/crypto/bcm/cipher.h index b6d83e3aa46c..035c8389cb3d 100644 --- a/drivers/crypto/bcm/cipher.h +++ b/drivers/crypto/bcm/cipher.h @@ -388,7 +388,6 @@ struct spu_hw { u16 spu_req_hdr_len, unsigned int is_inbound, struct spu_cipher_parms *cipher_parms, - bool update_key, unsigned int data_size); void (*spu_request_pad)(u8 *pad_start, u32 gcm_padding, u32 hash_pad_len, enum hash_alg auth_alg, diff --git a/drivers/crypto/bcm/spu.c b/drivers/crypto/bcm/spu.c index e7562e9bf396..fe126f95c702 100644 --- a/drivers/crypto/bcm/spu.c +++ b/drivers/crypto/bcm/spu.c @@ -222,10 +222,6 @@ void spum_dump_msg_hdr(u8 *buf, unsigned int buf_len) cipher_key_len = 24; name = "3DES"; break; - case CIPHER_ALG_RC4: - cipher_key_len = 260; - name = "ARC4"; - break; case CIPHER_ALG_AES: switch (cipher_type) { case CIPHER_TYPE_AES128: @@ -919,21 +915,16 @@ u16 spum_cipher_req_init(u8 *spu_hdr, struct spu_cipher_parms *cipher_parms) * @spu_req_hdr_len: Length in bytes of the SPU request header * @isInbound: 0 encrypt, 1 decrypt * @cipher_parms: Parameters describing cipher operation to be performed - * @update_key: If true, rewrite the cipher key in SCTX * @data_size: Length of the data in the BD field * * Assumes much of the header was already filled in at setkey() time in * spum_cipher_req_init(). - * spum_cipher_req_init() fills in the encryption key. For RC4, when submitting - * a request for a non-first chunk, we use the 260-byte SUPDT field from the - * previous response as the key. update_key is true for this case. Unused in all - * other cases. + * spum_cipher_req_init() fills in the encryption key. */ void spum_cipher_req_finish(u8 *spu_hdr, u16 spu_req_hdr_len, unsigned int is_inbound, struct spu_cipher_parms *cipher_parms, - bool update_key, unsigned int data_size) { struct SPUHEADER *spuh; @@ -948,11 +939,6 @@ void spum_cipher_req_finish(u8 *spu_hdr, flow_log(" in: %u\n", is_inbound); flow_log(" cipher alg: %u, cipher_type: %u\n", cipher_parms->alg, cipher_parms->type); - if (update_key) { - flow_log(" cipher key len: %u\n", cipher_parms->key_len); - flow_dump(" key: ", cipher_parms->key_buf, - cipher_parms->key_len); - } /* * In XTS mode, API puts "i" parameter (block tweak) in IV. For @@ -981,13 +967,6 @@ void spum_cipher_req_finish(u8 *spu_hdr, else cipher_bits &= ~CIPHER_INBOUND; - /* update encryption key for RC4 on non-first chunk */ - if (update_key) { - spuh->sa.cipher_flags |= - cipher_parms->type << CIPHER_TYPE_SHIFT; - memcpy(spuh + 1, cipher_parms->key_buf, cipher_parms->key_len); - } - if (cipher_parms->alg && cipher_parms->iv_buf && cipher_parms->iv_len) /* cipher iv provided so put it in here */ memcpy(bdesc_ptr - cipher_parms->iv_len, cipher_parms->iv_buf, diff --git a/drivers/crypto/bcm/spu.h b/drivers/crypto/bcm/spu.h index b247bc5b9354..dd132389bcaa 100644 --- a/drivers/crypto/bcm/spu.h +++ b/drivers/crypto/bcm/spu.h @@ -251,7 +251,6 @@ void spum_cipher_req_finish(u8 *spu_hdr, u16 spu_req_hdr_len, unsigned int is_inbound, struct spu_cipher_parms *cipher_parms, - bool update_key, unsigned int data_size); void spum_request_pad(u8 *pad_start, diff --git a/drivers/crypto/bcm/spu2.c b/drivers/crypto/bcm/spu2.c index 59abb5ecefa4..c860ffb0b4c3 100644 --- a/drivers/crypto/bcm/spu2.c +++ b/drivers/crypto/bcm/spu2.c @@ -1170,21 +1170,16 @@ u16 spu2_cipher_req_init(u8 *spu_hdr, struct spu_cipher_parms *cipher_parms) * @spu_req_hdr_len: Length in bytes of the SPU request header * @isInbound: 0 encrypt, 1 decrypt * @cipher_parms: Parameters describing cipher operation to be performed - * @update_key: If true, rewrite the cipher key in SCTX * @data_size: Length of the data in the BD field * * Assumes much of the header was already filled in at setkey() time in * spu_cipher_req_init(). - * spu_cipher_req_init() fills in the encryption key. For RC4, when submitting a - * request for a non-first chunk, we use the 260-byte SUPDT field from the - * previous response as the key. update_key is true for this case. Unused in all - * other cases. + * spu_cipher_req_init() fills in the encryption key. */ void spu2_cipher_req_finish(u8 *spu_hdr, u16 spu_req_hdr_len, unsigned int is_inbound, struct spu_cipher_parms *cipher_parms, - bool update_key, unsigned int data_size) { struct SPU2_FMD *fmd; @@ -1196,11 +1191,6 @@ void spu2_cipher_req_finish(u8 *spu_hdr, flow_log(" in: %u\n", is_inbound); flow_log(" cipher alg: %u, cipher_type: %u\n", cipher_parms->alg, cipher_parms->type); - if (update_key) { - flow_log(" cipher key len: %u\n", cipher_parms->key_len); - flow_dump(" key: ", cipher_parms->key_buf, - cipher_parms->key_len); - } flow_log(" iv len: %d\n", cipher_parms->iv_len); flow_dump(" iv: ", cipher_parms->iv_buf, cipher_parms->iv_len); flow_log(" data_size: %u\n", data_size); diff --git a/drivers/crypto/bcm/spu2.h b/drivers/crypto/bcm/spu2.h index 03af6c38df7f..6e666bfb3cfc 100644 --- a/drivers/crypto/bcm/spu2.h +++ b/drivers/crypto/bcm/spu2.h @@ -200,7 +200,6 @@ void spu2_cipher_req_finish(u8 *spu_hdr, u16 spu_req_hdr_len, unsigned int is_inbound, struct spu_cipher_parms *cipher_parms, - bool update_key, unsigned int data_size); void spu2_request_pad(u8 *pad_start, u32 gcm_padding, u32 hash_pad_len, enum hash_alg auth_alg, enum hash_mode auth_mode, |