diff options
30 files changed, 922 insertions, 213 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt index 651491bb63b7..5705f575862d 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt @@ -6,7 +6,10 @@ and resin along with the Android reboot-mode. This DT node has pwrkey and resin as sub nodes. Required Properties: --compatible: "qcom,pm8916-pon" +-compatible: Must be one of: + "qcom,pm8916-pon" + "qcom,pms405-pon" + -reg: Specifies the physical address of the pon register Optional subnode: diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt index c9dd17d142ad..dc0568933359 100644 --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt +++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt @@ -1,5 +1,8 @@ Binding for TI bq25890 Li-Ion Charger +This driver will support the bq25896 and the bq25890. There are other ICs +in the same family but those have not been tested. + Required properties: - compatible: Should contain one of the following: * "ti,bq25890" diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt index 37994fdb18ca..4fa8e08df2b6 100644 --- a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt @@ -23,6 +23,7 @@ Required properties: * "ti,bq27546" - BQ27546 * "ti,bq27742" - BQ27742 * "ti,bq27545" - BQ27545 + * "ti,bq27411" - BQ27411 * "ti,bq27421" - BQ27421 * "ti,bq27425" - BQ27425 * "ti,bq27426" - BQ27426 diff --git a/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt new file mode 100644 index 000000000000..5266fab16575 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sc2731_charger.txt @@ -0,0 +1,40 @@ +Spreadtrum SC2731 PMIC battery charger binding + +Required properties: + - compatible: Should be "sprd,sc2731-charger". + - reg: Address offset of charger register. + - phys: Contains a phandle to the USB phy. + +Optional Properties: +- monitored-battery: phandle of battery characteristics devicetree node. + The charger uses the following battery properties: +- charge-term-current-microamp: current for charge termination phase. +- constant-charge-voltage-max-microvolt: maximum constant input voltage. + See Documentation/devicetree/bindings/power/supply/battery.txt + +Example: + + bat: battery { + compatible = "simple-battery"; + charge-term-current-microamp = <120000>; + constant-charge-voltage-max-microvolt = <4350000>; + ...... + }; + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + charger@0 { + compatible = "sprd,sc2731-charger"; + reg = <0x0>; + phys = <&ssphy>; + monitored-battery = <&bat>; + }; + }; diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index a7c6ae13c945..bfe1c4d06901 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -149,6 +149,14 @@ exit_suspend: ENDPROC(at91_pm_suspend_in_sram) ENTRY(at91_backup_mode) + /* Switch the master clock source to slow clock. */ + ldr pmc, .pmc_base + ldr tmp1, [pmc, #AT91_PMC_MCKR] + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + /*BUMEN*/ ldr r0, .sfr mov tmp1, #0x1 diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c index 0206cce328b3..2b686c55b717 100644 --- a/drivers/power/reset/at91-sama5d2_shdwc.c +++ b/drivers/power/reset/at91-sama5d2_shdwc.c @@ -19,6 +19,7 @@ */ #include <linux/clk.h> +#include <linux/clk/at91_pmc.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> @@ -69,7 +70,10 @@ struct shdwc_config { struct shdwc { const struct shdwc_config *cfg; - void __iomem *at91_shdwc_base; + struct clk *sclk; + void __iomem *shdwc_base; + void __iomem *mpddrc_base; + void __iomem *pmc_base; }; /* @@ -77,8 +81,6 @@ struct shdwc { * since pm_power_off itself is global. */ static struct shdwc *at91_shdwc; -static struct clk *sclk; -static void __iomem *mpddrc_base; static const unsigned long long sdwc_dbc_period[] = { 0, 3, 32, 512, 4096, 32768, @@ -90,7 +92,7 @@ static void __init at91_wakeup_status(struct platform_device *pdev) u32 reg; char *reason = "unknown"; - reg = readl(shdw->at91_shdwc_base + AT91_SHDW_SR); + reg = readl(shdw->shdwc_base + AT91_SHDW_SR); dev_dbg(&pdev->dev, "%s: status = %#x\n", __func__, reg); @@ -108,12 +110,6 @@ static void __init at91_wakeup_status(struct platform_device *pdev) static void at91_poweroff(void) { - writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, - at91_shdwc->at91_shdwc_base + AT91_SHDW_CR); -} - -static void at91_lpddr_poweroff(void) -{ asm volatile( /* Align to cache lines */ ".balign 32\n\t" @@ -122,16 +118,29 @@ static void at91_lpddr_poweroff(void) " ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t" /* Power down SDRAM0 */ + " tst %0, #0\n\t" + " beq 1f\n\t" " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" + + /* Switch the master clock source to slow clock. */ + "1: ldr r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t" + " bic r6, r6, #" __stringify(AT91_PMC_CSS) "\n\t" + " str r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t" + /* Wait for clock switch. */ + "2: ldr r6, [%4, #" __stringify(AT91_PMC_SR) "]\n\t" + " tst r6, #" __stringify(AT91_PMC_MCKRDY) "\n\t" + " beq 2b\n\t" + /* Shutdown CPU */ " str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t" " b .\n\t" : - : "r" (mpddrc_base), + : "r" (at91_shdwc->mpddrc_base), "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF), - "r" (at91_shdwc->at91_shdwc_base), - "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW) + "r" (at91_shdwc->shdwc_base), + "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW), + "r" (at91_shdwc->pmc_base) : "r6"); } @@ -213,10 +222,10 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev) mode |= SHDW_RTCWKEN(shdw->cfg); dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode); - writel(mode, shdw->at91_shdwc_base + AT91_SHDW_MR); + writel(mode, shdw->shdwc_base + AT91_SHDW_MR); input = at91_shdwc_get_wakeup_input(pdev, np); - writel(input, shdw->at91_shdwc_base + AT91_SHDW_WUIR); + writel(input, shdw->shdwc_base + AT91_SHDW_WUIR); } static const struct shdwc_config sama5d2_shdwc_config = { @@ -246,6 +255,9 @@ static int __init at91_shdwc_probe(struct platform_device *pdev) if (!pdev->dev.of_node) return -ENODEV; + if (at91_shdwc) + return -EBUSY; + at91_shdwc = devm_kzalloc(&pdev->dev, sizeof(*at91_shdwc), GFP_KERNEL); if (!at91_shdwc) return -ENOMEM; @@ -253,20 +265,20 @@ static int __init at91_shdwc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, at91_shdwc); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - at91_shdwc->at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(at91_shdwc->at91_shdwc_base)) { + at91_shdwc->shdwc_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(at91_shdwc->shdwc_base)) { dev_err(&pdev->dev, "Could not map reset controller address\n"); - return PTR_ERR(at91_shdwc->at91_shdwc_base); + return PTR_ERR(at91_shdwc->shdwc_base); } match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node); at91_shdwc->cfg = match->data; - sclk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(sclk)) - return PTR_ERR(sclk); + at91_shdwc->sclk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(at91_shdwc->sclk)) + return PTR_ERR(at91_shdwc->sclk); - ret = clk_prepare_enable(sclk); + ret = clk_prepare_enable(at91_shdwc->sclk); if (ret) { dev_err(&pdev->dev, "Could not enable slow clock\n"); return ret; @@ -276,41 +288,70 @@ static int __init at91_shdwc_probe(struct platform_device *pdev) at91_shdwc_dt_configure(pdev); - pm_power_off = at91_poweroff; + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-pmc"); + if (!np) { + ret = -ENODEV; + goto clk_disable; + } + + at91_shdwc->pmc_base = of_iomap(np, 0); + of_node_put(np); + + if (!at91_shdwc->pmc_base) { + ret = -ENOMEM; + goto clk_disable; + } np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc"); - if (!np) - return 0; + if (!np) { + ret = -ENODEV; + goto unmap; + } - mpddrc_base = of_iomap(np, 0); + at91_shdwc->mpddrc_base = of_iomap(np, 0); of_node_put(np); - if (!mpddrc_base) - return 0; + if (!at91_shdwc->mpddrc_base) { + ret = -ENOMEM; + goto unmap; + } - ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD; - if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) || - (ddr_type == AT91_DDRSDRC_MD_LPDDR3)) - pm_power_off = at91_lpddr_poweroff; - else - iounmap(mpddrc_base); + pm_power_off = at91_poweroff; + + ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) & + AT91_DDRSDRC_MD; + if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 && + ddr_type != AT91_DDRSDRC_MD_LPDDR3) { + iounmap(at91_shdwc->mpddrc_base); + at91_shdwc->mpddrc_base = NULL; + } return 0; + +unmap: + iounmap(at91_shdwc->pmc_base); +clk_disable: + clk_disable_unprepare(at91_shdwc->sclk); + + return ret; } static int __exit at91_shdwc_remove(struct platform_device *pdev) { struct shdwc *shdw = platform_get_drvdata(pdev); - if (pm_power_off == at91_poweroff || - pm_power_off == at91_lpddr_poweroff) + if (pm_power_off == at91_poweroff) pm_power_off = NULL; /* Reset values to disable wake-up features */ - writel(0, shdw->at91_shdwc_base + AT91_SHDW_MR); - writel(0, shdw->at91_shdwc_base + AT91_SHDW_WUIR); + writel(0, shdw->shdwc_base + AT91_SHDW_MR); + writel(0, shdw->shdwc_base + AT91_SHDW_WUIR); + + if (shdw->mpddrc_base) + iounmap(shdw->mpddrc_base); + iounmap(shdw->pmc_base); - clk_disable_unprepare(sclk); + clk_disable_unprepare(shdw->sclk); return 0; } diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c index 0c4caaa7e88f..3fa1642d4c54 100644 --- a/drivers/power/reset/qcom-pon.c +++ b/drivers/power/reset/qcom-pon.c @@ -74,6 +74,7 @@ static int pm8916_pon_probe(struct platform_device *pdev) static const struct of_device_id pm8916_pon_id_table[] = { { .compatible = "qcom,pm8916-pon" }, + { .compatible = "qcom,pms405-pon" }, { } }; MODULE_DEVICE_TABLE(of, pm8916_pon_id_table); diff --git a/drivers/power/reset/rmobile-reset.c b/drivers/power/reset/rmobile-reset.c index e6569df76941..bd3b396558e0 100644 --- a/drivers/power/reset/rmobile-reset.c +++ b/drivers/power/reset/rmobile-reset.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Renesas R-Mobile Reset Driver * * Copyright (C) 2014 Glider bvba - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. */ #include <linux/io.h> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index ff6dab0bf0dd..f27cf0709500 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -645,4 +645,11 @@ config CHARGER_CROS_USBPD what is connected to USB PD ports from the EC and converts that into power_supply properties. +config CHARGER_SC2731 + tristate "Spreadtrum SC2731 charger driver" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + help + Say Y here to enable support for battery charging with SC2731 + PMIC chips. + endif # POWER_SUPPLY diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index a26b402c45d9..767105b88d00 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -85,3 +85,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o +obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c index 02356f9b5f22..776102c31305 100644 --- a/drivers/power/supply/ab8500_fg.c +++ b/drivers/power/supply/ab8500_fg.c @@ -2433,17 +2433,14 @@ static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf, size_t count) { unsigned long charge_full; - ssize_t ret; + int ret; ret = kstrtoul(buf, 10, &charge_full); + if (ret) + return ret; - dev_dbg(di->dev, "Ret %zd charge_full %lu", ret, charge_full); - - if (!ret) { - di->bat_cap.max_mah = (int) charge_full; - ret = count; - } - return ret; + di->bat_cap.max_mah = (int) charge_full; + return count; } static ssize_t charge_now_show(struct ab8500_fg *di, char *buf) @@ -2455,20 +2452,16 @@ static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf, size_t count) { unsigned long charge_now; - ssize_t ret; + int ret; ret = kstrtoul(buf, 10, &charge_now); + if (ret) + return ret; - dev_dbg(di->dev, "Ret %zd charge_now %lu was %d", - ret, charge_now, di->bat_cap.prev_mah); - - if (!ret) { - di->bat_cap.user_mah = (int) charge_now; - di->flags.user_cap = true; - ret = count; - queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); - } - return ret; + di->bat_cap.user_mah = (int) charge_now; + di->flags.user_cap = true; + queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0); + return count; } static struct ab8500_fg_sysfs_entry charge_full_attr = @@ -2582,11 +2575,12 @@ static ssize_t ab8505_powercut_flagtime_write(struct device *dev, const char *buf, size_t count) { int ret; - long unsigned reg_value; + int reg_value; struct power_supply *psy = dev_get_drvdata(dev); struct ab8500_fg *di = power_supply_get_drvdata(psy); - reg_value = simple_strtoul(buf, NULL, 10); + if (kstrtoint(buf, 10, ®_value)) + goto fail; if (reg_value > 0x7F) { dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n"); @@ -2636,7 +2630,9 @@ static ssize_t ab8505_powercut_maxtime_write(struct device *dev, struct power_supply *psy = dev_get_drvdata(dev); struct ab8500_fg *di = power_supply_get_drvdata(psy); - reg_value = simple_strtoul(buf, NULL, 10); + if (kstrtoint(buf, 10, ®_value)) + goto fail; + if (reg_value > 0x7F) { dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n"); goto fail; @@ -2684,7 +2680,9 @@ static ssize_t ab8505_powercut_restart_write(struct device *dev, struct power_supply *psy = dev_get_drvdata(dev); struct ab8500_fg *di = power_supply_get_drvdata(psy); - reg_value = simple_strtoul(buf, NULL, 10); + if (kstrtoint(buf, 10, ®_value)) + goto fail; + if (reg_value > 0xF) { dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n"); goto fail; @@ -2777,7 +2775,9 @@ static ssize_t ab8505_powercut_write(struct device *dev, struct power_supply *psy = dev_get_drvdata(dev); struct ab8500_fg *di = power_supply_get_drvdata(psy); - reg_value = simple_strtoul(buf, NULL, 10); + if (kstrtoint(buf, 10, ®_value)) + goto fail; + if (reg_value > 0x1) { dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n"); goto fail; @@ -2849,7 +2849,9 @@ static ssize_t ab8505_powercut_debounce_write(struct device *dev, struct power_supply *psy = dev_get_drvdata(dev); struct ab8500_fg *di = power_supply_get_drvdata(psy); - reg_value = simple_strtoul(buf, NULL, 10); + if (kstrtoint(buf, 10, ®_value)) + goto fail; + if (reg_value > 0x7) { dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n"); goto fail; diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index 8e2c41ded171..70b90db5ae38 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -32,6 +32,7 @@ #define BQ25890_IRQ_PIN "bq25890_irq" #define BQ25890_ID 3 +#define BQ25896_ID 0 enum bq25890_fields { F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */ @@ -153,8 +154,8 @@ static const struct reg_field bq25890_reg_fields[] = { [F_CONV_RATE] = REG_FIELD(0x02, 6, 6), [F_BOOSTF] = REG_FIELD(0x02, 5, 5), [F_ICO_EN] = REG_FIELD(0x02, 4, 4), - [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3), - [F_MAXC_EN] = REG_FIELD(0x02, 2, 2), + [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3), // reserved on BQ25896 + [F_MAXC_EN] = REG_FIELD(0x02, 2, 2), // reserved on BQ25896 [F_FORCE_DPM] = REG_FIELD(0x02, 1, 1), [F_AUTO_DPDM_EN] = REG_FIELD(0x02, 0, 0), /* REG03 */ @@ -163,6 +164,7 @@ static const struct reg_field bq25890_reg_fields[] = { [F_OTG_CFG] = REG_FIELD(0x03, 5, 5), [F_CHG_CFG] = REG_FIELD(0x03, 4, 4), [F_SYSVMIN] = REG_FIELD(0x03, 1, 3), + /* MIN_VBAT_SEL on BQ25896 */ /* REG04 */ [F_PUMPX_EN] = REG_FIELD(0x04, 7, 7), [F_ICHG] = REG_FIELD(0x04, 0, 6), @@ -181,7 +183,7 @@ static const struct reg_field bq25890_reg_fields[] = { [F_CHG_TMR] = REG_FIELD(0x07, 1, 2), [F_JEITA_ISET] = REG_FIELD(0x07, 0, 0), /* REG08 */ - [F_BATCMP] = REG_FIELD(0x08, 6, 7), + [F_BATCMP] = REG_FIELD(0x08, 6, 7), // 5-7 on BQ25896 [F_VCLAMP] = REG_FIELD(0x08, 2, 4), [F_TREG] = REG_FIELD(0x08, 0, 1), /* REG09 */ @@ -195,12 +197,13 @@ static const struct reg_field bq25890_reg_fields[] = { [F_PUMPX_DN] = REG_FIELD(0x09, 0, 0), /* REG0A */ [F_BOOSTV] = REG_FIELD(0x0A, 4, 7), + /* PFM_OTG_DIS 3 on BQ25896 */ [F_BOOSTI] = REG_FIELD(0x0A, 0, 2), /* REG0B */ [F_VBUS_STAT] = REG_FIELD(0x0B, 5, 7), [F_CHG_STAT] = REG_FIELD(0x0B, 3, 4), [F_PG_STAT] = REG_FIELD(0x0B, 2, 2), - [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1), + [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1), // reserved on BQ25896 [F_VSYS_STAT] = REG_FIELD(0x0B, 0, 0), /* REG0C */ [F_WD_FAULT] = REG_FIELD(0x0C, 7, 7), @@ -244,10 +247,7 @@ enum bq25890_table_ids { /* range tables */ TBL_ICHG, TBL_ITERM, - TBL_IPRECHG, TBL_VREG, - TBL_BATCMP, - TBL_VCLAMP, TBL_BOOSTV, TBL_SYSVMIN, @@ -287,8 +287,6 @@ static const union { [TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */ [TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */ [TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */ - [TBL_BATCMP] = { .rt = {0, 140, 20} }, /* mOhm */ - [TBL_VCLAMP] = { .rt = {0, 224000, 32000} }, /* uV */ [TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */ [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */ @@ -401,6 +399,16 @@ static int bq25890_power_supply_get_property(struct power_supply *psy, val->strval = BQ25890_MANUFACTURER; break; + case POWER_SUPPLY_PROP_MODEL_NAME: + if (bq->chip_id == BQ25890_ID) + val->strval = "BQ25890"; + else if (bq->chip_id == BQ25896_ID) + val->strval = "BQ25896"; + else + val->strval = "UNKNOWN"; + + break; + case POWER_SUPPLY_PROP_ONLINE: val->intval = state.online; break; @@ -453,6 +461,15 @@ static int bq25890_power_supply_get_property(struct power_supply *psy, val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM); break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = bq25890_field_read(bq, F_SYSV); /* read measured value */ + if (ret < 0) + return ret; + + /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */ + val->intval = 2304000 + ret * 20000; + break; + default: return -EINVAL; } @@ -608,30 +625,40 @@ static int bq25890_hw_init(struct bq25890_device *bq) }; ret = bq25890_chip_reset(bq); - if (ret < 0) + if (ret < 0) { + dev_dbg(bq->dev, "Reset failed %d\n", ret); return ret; + } /* disable watchdog */ ret = bq25890_field_write(bq, F_WD, 0); - if (ret < 0) + if (ret < 0) { + dev_dbg(bq->dev, "Disabling watchdog failed %d\n", ret); return ret; + } /* initialize currents/voltages and other parameters */ for (i = 0; i < ARRAY_SIZE(init_data); i++) { ret = bq25890_field_write(bq, init_data[i].id, init_data[i].value); - if (ret < 0) + if (ret < 0) { + dev_dbg(bq->dev, "Writing init data failed %d\n", ret); return ret; + } } /* Configure ADC for continuous conversions. This does not enable it. */ ret = bq25890_field_write(bq, F_CONV_RATE, 1); - if (ret < 0) + if (ret < 0) { + dev_dbg(bq->dev, "Config ADC failed %d\n", ret); return ret; + } ret = bq25890_get_chip_state(bq, &state); - if (ret < 0) + if (ret < 0) { + dev_dbg(bq->dev, "Get state failed %d\n", ret); return ret; + } mutex_lock(&bq->lock); bq->state = state; @@ -642,6 +669,7 @@ static int bq25890_hw_init(struct bq25890_device *bq) static enum power_supply_property bq25890_power_supply_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_HEALTH, @@ -650,6 +678,7 @@ static enum power_supply_property bq25890_power_supply_props[] = { POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, }; static char *bq25890_charger_supplied_to[] = { @@ -767,6 +796,9 @@ static int bq25890_fw_read_u32_props(struct bq25890_device *bq) if (props[i].optional) continue; + dev_err(bq->dev, "Unable to read property %d %s\n", ret, + props[i].name); + return ret; } @@ -840,7 +872,7 @@ static int bq25890_probe(struct i2c_client *client, return bq->chip_id; } - if (bq->chip_id != BQ25890_ID) { + if ((bq->chip_id != BQ25890_ID) && (bq->chip_id != BQ25896_ID)) { dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id); return -ENODEV; } diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c index f022e1b550df..6dbbe95844a3 100644 --- a/drivers/power/supply/bq27xxx_battery.c +++ b/drivers/power/supply/bq27xxx_battery.c @@ -432,6 +432,7 @@ static u8 [BQ27XXX_REG_AP] = 0x18, BQ27XXX_DM_REG_ROWS, }; +#define bq27411_regs bq27421_regs #define bq27425_regs bq27421_regs #define bq27426_regs bq27421_regs #define bq27441_regs bq27421_regs @@ -665,6 +666,7 @@ static enum power_supply_property bq27421_props[] = { POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, POWER_SUPPLY_PROP_MANUFACTURER, }; +#define bq27411_props bq27421_props #define bq27425_props bq27421_props #define bq27426_props bq27421_props #define bq27441_props bq27421_props @@ -725,6 +727,12 @@ static struct bq27xxx_dm_reg bq27545_dm_regs[] = { #define bq27545_dm_regs 0 #endif +static struct bq27xxx_dm_reg bq27411_dm_regs[] = { + [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 10, 2, 0, 32767 }, + [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 12, 2, 0, 32767 }, + [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 16, 2, 2800, 3700 }, +}; + static struct bq27xxx_dm_reg bq27421_dm_regs[] = { [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 10, 2, 0, 8000 }, [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 12, 2, 0, 32767 }, @@ -802,6 +810,7 @@ static struct { [BQ27546] = BQ27XXX_DATA(bq27546, 0 , BQ27XXX_O_OTDC), [BQ27742] = BQ27XXX_DATA(bq27742, 0 , BQ27XXX_O_OTDC), [BQ27545] = BQ27XXX_DATA(bq27545, 0x04143672, BQ27XXX_O_OTDC), + [BQ27411] = BQ27XXX_DATA(bq27411, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM), [BQ27421] = BQ27XXX_DATA(bq27421, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM), [BQ27425] = BQ27XXX_DATA(bq27425, 0x04143672, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP), [BQ27426] = BQ27XXX_DATA(bq27426, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM), diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c index 40069128ad44..2677c38a8a42 100644 --- a/drivers/power/supply/bq27xxx_battery_i2c.c +++ b/drivers/power/supply/bq27xxx_battery_i2c.c @@ -247,6 +247,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = { { "bq27546", BQ27546 }, { "bq27742", BQ27742 }, { "bq27545", BQ27545 }, + { "bq27411", BQ27411 }, { "bq27421", BQ27421 }, { "bq27425", BQ27425 }, { "bq27426", BQ27426 }, @@ -279,6 +280,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = { { .compatible = "ti,bq27546" }, { .compatible = "ti,bq27742" }, { .compatible = "ti,bq27545" }, + { .compatible = "ti,bq27411" }, { .compatible = "ti,bq27421" }, { .compatible = "ti,bq27425" }, { .compatible = "ti,bq27426" }, diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c index 688a16bacfbb..7e9c3984ef6a 100644 --- a/drivers/power/supply/cros_usbpd-charger.c +++ b/drivers/power/supply/cros_usbpd-charger.c @@ -12,8 +12,12 @@ #include <linux/power_supply.h> #include <linux/slab.h> -#define CHARGER_DIR_NAME "CROS_USBPD_CHARGER%d" -#define CHARGER_DIR_NAME_LENGTH sizeof(CHARGER_DIR_NAME) +#define CHARGER_USBPD_DIR_NAME "CROS_USBPD_CHARGER%d" +#define CHARGER_DEDICATED_DIR_NAME "CROS_DEDICATED_CHARGER" +#define CHARGER_DIR_NAME_LENGTH (sizeof(CHARGER_USBPD_DIR_NAME) >= \ + sizeof(CHARGER_DEDICATED_DIR_NAME) ? \ + sizeof(CHARGER_USBPD_DIR_NAME) : \ + sizeof(CHARGER_DEDICATED_DIR_NAME)) #define CHARGER_CACHE_UPDATE_DELAY msecs_to_jiffies(500) #define CHARGER_MANUFACTURER_MODEL_LENGTH 32 @@ -42,6 +46,7 @@ struct charger_data { struct cros_ec_dev *ec_dev; struct cros_ec_device *ec_device; int num_charger_ports; + int num_usbpd_ports; int num_registered_psy; struct port_data *ports[EC_USB_PD_MAX_PORTS]; struct notifier_block notifier; @@ -58,6 +63,12 @@ static enum power_supply_property cros_usbpd_charger_props[] = { POWER_SUPPLY_PROP_USB_TYPE }; +static enum power_supply_property cros_usbpd_dedicated_charger_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = { POWER_SUPPLY_USB_TYPE_UNKNOWN, POWER_SUPPLY_USB_TYPE_SDP, @@ -69,6 +80,11 @@ static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = { POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID }; +static bool cros_usbpd_charger_port_is_dedicated(struct port_data *port) +{ + return port->port_number >= port->charger->num_usbpd_ports; +} + static int cros_usbpd_charger_ec_command(struct charger_data *charger, unsigned int version, unsigned int command, @@ -103,6 +119,23 @@ static int cros_usbpd_charger_ec_command(struct charger_data *charger, static int cros_usbpd_charger_get_num_ports(struct charger_data *charger) { + struct ec_response_charge_port_count resp; + int ret; + + ret = cros_usbpd_charger_ec_command(charger, 0, + EC_CMD_CHARGE_PORT_COUNT, + NULL, 0, &resp, sizeof(resp)); + if (ret < 0) { + dev_err(charger->dev, + "Unable to get the number of ports (err:0x%x)\n", ret); + return ret; + } + + return resp.port_count; +} + +static int cros_usbpd_charger_get_usbpd_num_ports(struct charger_data *charger) +{ struct ec_response_usb_pd_ports resp; int ret; @@ -246,7 +279,10 @@ static int cros_usbpd_charger_get_power_info(struct port_data *port) port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP; } - port->psy_desc.type = POWER_SUPPLY_TYPE_USB; + if (cros_usbpd_charger_port_is_dedicated(port)) + port->psy_desc.type = POWER_SUPPLY_TYPE_MAINS; + else + port->psy_desc.type = POWER_SUPPLY_TYPE_USB; dev_dbg(dev, "Port %d: type=%d vmax=%d vnow=%d cmax=%d clim=%d pmax=%d\n", @@ -281,7 +317,8 @@ static int cros_usbpd_charger_get_port_status(struct port_data *port, if (ret < 0) return ret; - ret = cros_usbpd_charger_get_discovery_info(port); + if (!cros_usbpd_charger_port_is_dedicated(port)) + ret = cros_usbpd_charger_get_discovery_info(port); port->last_update = jiffies; return ret; @@ -378,12 +415,10 @@ static int cros_usbpd_charger_ec_event(struct notifier_block *nb, { struct cros_ec_device *ec_device; struct charger_data *charger; - struct device *dev; u32 host_event; charger = container_of(nb, struct charger_data, notifier); ec_device = charger->ec_device; - dev = charger->dev; host_event = cros_ec_get_host_event(ec_device); if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) { @@ -426,17 +461,56 @@ static int cros_usbpd_charger_probe(struct platform_device *pd) platform_set_drvdata(pd, charger); + /* + * We need to know the number of USB PD ports in order to know whether + * there is a dedicated port. The dedicated port will always be + * after the USB PD ports, and there should be only one. + */ + charger->num_usbpd_ports = + cros_usbpd_charger_get_usbpd_num_ports(charger); + if (charger->num_usbpd_ports <= 0) { + /* + * This can happen on a system that doesn't support USB PD. + * Log a message, but no need to warn. + */ + dev_info(dev, "No USB PD charging ports found\n"); + } + charger->num_charger_ports = cros_usbpd_charger_get_num_ports(charger); - if (charger->num_charger_ports <= 0) { + if (charger->num_charger_ports < 0) { /* * This can happen on a system that doesn't support USB PD. * Log a message, but no need to warn. + * Older ECs do not support the above command, in that case + * let's set up the number of charger ports equal to the number + * of USB PD ports + */ + dev_info(dev, "Could not get charger port count\n"); + charger->num_charger_ports = charger->num_usbpd_ports; + } + + if (charger->num_charger_ports <= 0) { + /* + * This can happen on a system that doesn't support USB PD and + * doesn't have a dedicated port. + * Log a message, but no need to warn. */ dev_info(dev, "No charging ports found\n"); ret = -ENODEV; goto fail_nowarn; } + /* + * Sanity checks on the number of ports: + * there should be at most 1 dedicated port + */ + if (charger->num_charger_ports < charger->num_usbpd_ports || + charger->num_charger_ports > (charger->num_usbpd_ports + 1)) { + dev_err(dev, "Unexpected number of charge port count\n"); + ret = -EPROTO; + goto fail_nowarn; + } + for (i = 0; i < charger->num_charger_ports; i++) { struct power_supply_config psy_cfg = {}; @@ -448,22 +522,33 @@ static int cros_usbpd_charger_probe(struct platform_device *pd) port->charger = charger; port->port_number = i; - sprintf(port->name, CHARGER_DIR_NAME, i); psy_desc = &port->psy_desc; - psy_desc->name = port->name; - psy_desc->type = POWER_SUPPLY_TYPE_USB; psy_desc->get_property = cros_usbpd_charger_get_prop; psy_desc->external_power_changed = cros_usbpd_charger_power_changed; - psy_desc->properties = cros_usbpd_charger_props; - psy_desc->num_properties = - ARRAY_SIZE(cros_usbpd_charger_props); - psy_desc->usb_types = cros_usbpd_charger_usb_types; - psy_desc->num_usb_types = - ARRAY_SIZE(cros_usbpd_charger_usb_types); psy_cfg.drv_data = port; + if (cros_usbpd_charger_port_is_dedicated(port)) { + sprintf(port->name, CHARGER_DEDICATED_DIR_NAME); + psy_desc->type = POWER_SUPPLY_TYPE_MAINS; + psy_desc->properties = + cros_usbpd_dedicated_charger_props; + psy_desc->num_properties = + ARRAY_SIZE(cros_usbpd_dedicated_charger_props); + } else { + sprintf(port->name, CHARGER_USBPD_DIR_NAME, i); + psy_desc->type = POWER_SUPPLY_TYPE_USB; + psy_desc->properties = cros_usbpd_charger_props; + psy_desc->num_properties = + ARRAY_SIZE(cros_usbpd_charger_props); + psy_desc->usb_types = cros_usbpd_charger_usb_types; + psy_desc->num_usb_types = + ARRAY_SIZE(cros_usbpd_charger_usb_types); + } + + psy_desc->name = port->name; + psy = devm_power_supply_register_no_ws(dev, psy_desc, &psy_cfg); if (IS_ERR(psy)) { diff --git a/drivers/power/supply/ds2780_battery.c b/drivers/power/supply/ds2780_battery.c index 370e9109342b..cad14ba1b648 100644 --- a/drivers/power/supply/ds2780_battery.c +++ b/drivers/power/supply/ds2780_battery.c @@ -829,5 +829,5 @@ module_platform_driver(ds2780_battery_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>"); -MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauage IC driver"); +MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC driver"); MODULE_ALIAS("platform:ds2780-battery"); diff --git a/drivers/power/supply/ds2781_battery.c b/drivers/power/supply/ds2781_battery.c index d1b5a19aae7c..5e794607f732 100644 --- a/drivers/power/supply/ds2781_battery.c +++ b/drivers/power/supply/ds2781_battery.c @@ -829,6 +829,6 @@ module_platform_driver(ds2781_battery_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>"); -MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauage IC driver"); +MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC driver"); MODULE_ALIAS("platform:ds2781-battery"); diff --git a/drivers/power/supply/ds2782_battery.c b/drivers/power/supply/ds2782_battery.c index a1b7e0592245..019c58493e3d 100644 --- a/drivers/power/supply/ds2782_battery.c +++ b/drivers/power/supply/ds2782_battery.c @@ -471,5 +471,5 @@ static struct i2c_driver ds278x_battery_driver = { module_i2c_driver(ds278x_battery_driver); MODULE_AUTHOR("Ryan Mallon"); -MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver"); +MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/power/supply/max14577_charger.c b/drivers/power/supply/max14577_charger.c index 449fc56f09eb..8a59feac6468 100644 --- a/drivers/power/supply/max14577_charger.c +++ b/drivers/power/supply/max14577_charger.c @@ -1,19 +1,9 @@ -/* - * max14577_charger.c - Battery charger driver for the Maxim 14577/77836 - * - * Copyright (C) 2013,2014 Samsung Electronics - * Krzysztof Kozlowski <krzk@kernel.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// max14577_charger.c - Battery charger driver for the Maxim 14577/77836 +// +// Copyright (C) 2013,2014 Samsung Electronics +// Krzysztof Kozlowski <krzk@kernel.org> #include <linux/module.h> #include <linux/platform_device.h> diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c index 33c40f79d23d..91cafc7bed30 100644 --- a/drivers/power/supply/max17040_battery.c +++ b/drivers/power/supply/max17040_battery.c @@ -1,14 +1,10 @@ -/* - * max17040_battery.c - * fuel-gauge systems for lithium-ion (Li+) batteries - * - * Copyright (C) 2009 Samsung Electronics - * Minkyu Kang <mk7.kang@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// max17040_battery.c +// fuel-gauge systems for lithium-ion (Li+) batteries +// +// Copyright (C) 2009 Samsung Electronics +// Minkyu Kang <mk7.kang@samsung.com> #include <linux/module.h> #include <linux/init.h> diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index 1a568df383db..2a8d75e5e930 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -1,26 +1,12 @@ -/* - * Fuel gauge driver for Maxim 17042 / 8966 / 8997 - * Note that Maxim 8966 and 8997 are mfd and this is its subdevice. - * - * Copyright (C) 2011 Samsung Electronics - * MyungJoo Ham <myungjoo.ham@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This driver is based on max17040_battery.c - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Fuel gauge driver for Maxim 17042 / 8966 / 8997 +// Note that Maxim 8966 and 8997 are mfd and this is its subdevice. +// +// Copyright (C) 2011 Samsung Electronics +// MyungJoo Ham <myungjoo.ham@samsung.com> +// +// This driver is based on max17040_battery.c #include <linux/acpi.h> #include <linux/init.h> diff --git a/drivers/power/supply/max77693_charger.c b/drivers/power/supply/max77693_charger.c index 749c7926e3c9..a2c5c9858639 100644 --- a/drivers/power/supply/max77693_charger.c +++ b/drivers/power/supply/max77693_charger.c @@ -1,19 +1,9 @@ -/* - * max77693_charger.c - Battery charger driver for the Maxim 77693 - * - * Copyright (C) 2014 Samsung Electronics - * Krzysztof Kozlowski <krzk@kernel.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// max77693_charger.c - Battery charger driver for the Maxim 77693 +// +// Copyright (C) 2014 Samsung Electronics +// Krzysztof Kozlowski <krzk@kernel.org> #include <linux/module.h> #include <linux/platform_device.h> diff --git a/drivers/power/supply/max8925_power.c b/drivers/power/supply/max8925_power.c index 3b94620ce5c1..39b4d5b6ac39 100644 --- a/drivers/power/supply/max8925_power.c +++ b/drivers/power/supply/max8925_power.c @@ -124,6 +124,7 @@ static irqreturn_t max8925_charger_handler(int irq, void *data) case MAX8925_IRQ_VCHG_THM_OK_F: /* Battery is not ready yet */ dev_dbg(chip->dev, "Battery temperature is out of range\n"); + /* Fall through */ case MAX8925_IRQ_VCHG_DC_OVP: dev_dbg(chip->dev, "Error detection\n"); __set_charger(info, 0); diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c index c73fb4221695..f5e84cd47924 100644 --- a/drivers/power/supply/max8997_charger.c +++ b/drivers/power/supply/max8997_charger.c @@ -1,23 +1,9 @@ -/* - * max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966 - * - * Copyright (C) 2011 Samsung Electronics - * MyungJoo Ham <myungjoo.ham@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966 +// +// Copyright (C) 2011 Samsung Electronics +// MyungJoo Ham <myungjoo.ham@samsung.com> #include <linux/err.h> #include <linux/module.h> diff --git a/drivers/power/supply/max8998_charger.c b/drivers/power/supply/max8998_charger.c index cad7d1a8feec..9a926c7c0f22 100644 --- a/drivers/power/supply/max8998_charger.c +++ b/drivers/power/supply/max8998_charger.c @@ -1,23 +1,9 @@ -/* - * max8998_charger.c - Power supply consumer driver for the Maxim 8998/LP3974 - * - * Copyright (C) 2009-2010 Samsung Electronics - * MyungJoo Ham <myungjoo.ham@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// max8998_charger.c - Power supply consumer driver for the Maxim 8998/LP3974 +// +// Copyright (C) 2009-2010 Samsung Electronics +// MyungJoo Ham <myungjoo.ham@samsung.com> #include <linux/err.h> #include <linux/module.h> @@ -86,7 +72,7 @@ static const struct power_supply_desc max8998_battery_desc = { static int max8998_battery_probe(struct platform_device *pdev) { struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev); + struct max8998_platform_data *pdata = iodev->pdata; struct power_supply_config psy_cfg = {}; struct max8998_battery_data *max8998; struct i2c_client *i2c; diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c index 6170ed8b6854..dce24f596160 100644 --- a/drivers/power/supply/power_supply_sysfs.c +++ b/drivers/power/supply/power_supply_sysfs.c @@ -131,7 +131,8 @@ static ssize_t power_supply_show_property(struct device *dev, dev_dbg(dev, "driver has no data for `%s' property\n", attr->attr.name); else if (ret != -ENODEV && ret != -EAGAIN) - dev_err(dev, "driver failed to report `%s' property: %zd\n", + dev_err_ratelimited(dev, + "driver failed to report `%s' property: %zd\n", attr->attr.name, ret); return ret; } diff --git a/drivers/power/supply/sc2731_charger.c b/drivers/power/supply/sc2731_charger.c new file mode 100644 index 000000000000..525a820537bf --- /dev/null +++ b/drivers/power/supply/sc2731_charger.c @@ -0,0 +1,504 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2018 Spreadtrum Communications Inc. + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/usb/phy.h> +#include <linux/regmap.h> +#include <linux/notifier.h> +#include <linux/of.h> + +/* PMIC global registers definition */ +#define SC2731_CHARGE_STATUS 0xedc +#define SC2731_CHARGE_FULL BIT(4) +#define SC2731_MODULE_EN1 0xc0c +#define SC2731_CHARGE_EN BIT(5) + +/* SC2731 switch charger registers definition */ +#define SC2731_CHG_CFG0 0x0 +#define SC2731_CHG_CFG1 0x4 +#define SC2731_CHG_CFG2 0x8 +#define SC2731_CHG_CFG3 0xc +#define SC2731_CHG_CFG4 0x10 +#define SC2731_CHG_CFG5 0x28 + +/* SC2731_CHG_CFG0 register definition */ +#define SC2731_PRECHG_RNG_SHIFT 11 +#define SC2731_PRECHG_RNG_MASK GENMASK(12, 11) + +#define SC2731_TERMINATION_VOL_MASK GENMASK(2, 1) +#define SC2731_TERMINATION_VOL_SHIFT 1 +#define SC2731_TERMINATION_VOL_CAL_MASK GENMASK(8, 3) +#define SC2731_TERMINATION_VOL_CAL_SHIFT 3 +#define SC2731_TERMINATION_CUR_MASK GENMASK(2, 0) + +#define SC2731_CC_EN BIT(13) +#define SC2731_CHARGER_PD BIT(0) + +/* SC2731_CHG_CFG1 register definition */ +#define SC2731_CUR_MASK GENMASK(5, 0) + +/* SC2731_CHG_CFG5 register definition */ +#define SC2731_CUR_LIMIT_SHIFT 8 +#define SC2731_CUR_LIMIT_MASK GENMASK(9, 8) + +/* Default current definition (unit is mA) */ +#define SC2731_CURRENT_LIMIT_100 100 +#define SC2731_CURRENT_LIMIT_500 500 +#define SC2731_CURRENT_LIMIT_900 900 +#define SC2731_CURRENT_LIMIT_2000 2000 +#define SC2731_CURRENT_PRECHG 450 +#define SC2731_CURRENT_STEP 50 + +struct sc2731_charger_info { + struct device *dev; + struct regmap *regmap; + struct usb_phy *usb_phy; + struct notifier_block usb_notify; + struct power_supply *psy_usb; + struct mutex lock; + bool charging; + u32 base; +}; + +static void sc2731_charger_stop_charge(struct sc2731_charger_info *info) +{ + regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CC_EN, 0); + + regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CHARGER_PD, SC2731_CHARGER_PD); +} + +static int sc2731_charger_start_charge(struct sc2731_charger_info *info) +{ + int ret; + + /* Enable charger constant current mode */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CC_EN, SC2731_CC_EN); + if (ret) + return ret; + + /* Start charging */ + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_CHARGER_PD, 0); +} + +static int sc2731_charger_set_current_limit(struct sc2731_charger_info *info, + u32 limit) +{ + u32 val; + + if (limit <= SC2731_CURRENT_LIMIT_100) + val = 0; + else if (limit <= SC2731_CURRENT_LIMIT_500) + val = 3; + else if (limit <= SC2731_CURRENT_LIMIT_900) + val = 2; + else + val = 1; + + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG5, + SC2731_CUR_LIMIT_MASK, + val << SC2731_CUR_LIMIT_SHIFT); +} + +static int sc2731_charger_set_current(struct sc2731_charger_info *info, u32 cur) +{ + u32 val; + int ret; + + if (cur > SC2731_CURRENT_LIMIT_2000) + cur = SC2731_CURRENT_LIMIT_2000; + else if (cur < SC2731_CURRENT_PRECHG) + cur = SC2731_CURRENT_PRECHG; + + /* Calculate the step value, each step is 50 mA */ + val = (cur - SC2731_CURRENT_PRECHG) / SC2731_CURRENT_STEP; + + /* Set pre-charge current as 450 mA */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_PRECHG_RNG_MASK, + 0x3 << SC2731_PRECHG_RNG_SHIFT); + if (ret) + return ret; + + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG1, + SC2731_CUR_MASK, val); +} + +static int sc2731_charger_get_status(struct sc2731_charger_info *info) +{ + u32 val; + int ret; + + ret = regmap_read(info->regmap, SC2731_CHARGE_STATUS, &val); + if (ret) + return ret; + + if (val & SC2731_CHARGE_FULL) + return POWER_SUPPLY_STATUS_FULL; + + return POWER_SUPPLY_STATUS_CHARGING; +} + +static int sc2731_charger_get_current(struct sc2731_charger_info *info, + u32 *cur) +{ + int ret; + u32 val; + + ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG1, &val); + if (ret) + return ret; + + val &= SC2731_CUR_MASK; + *cur = val * SC2731_CURRENT_STEP + SC2731_CURRENT_PRECHG; + + return 0; +} + +static int sc2731_charger_get_current_limit(struct sc2731_charger_info *info, + u32 *cur) +{ + int ret; + u32 val; + + ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG5, &val); + if (ret) + return ret; + + val = (val & SC2731_CUR_LIMIT_MASK) >> SC2731_CUR_LIMIT_SHIFT; + + switch (val) { + case 0: + *cur = SC2731_CURRENT_LIMIT_100; + break; + + case 1: + *cur = SC2731_CURRENT_LIMIT_2000; + break; + + case 2: + *cur = SC2731_CURRENT_LIMIT_900; + break; + + case 3: + *cur = SC2731_CURRENT_LIMIT_500; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int +sc2731_charger_usb_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct sc2731_charger_info *info = power_supply_get_drvdata(psy); + int ret; + + mutex_lock(&info->lock); + + if (!info->charging) { + mutex_unlock(&info->lock); + return -ENODEV; + } + + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = sc2731_charger_set_current(info, val->intval / 1000); + if (ret < 0) + dev_err(info->dev, "set charge current failed\n"); + break; + + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = sc2731_charger_set_current_limit(info, + val->intval / 1000); + if (ret < 0) + dev_err(info->dev, "set input current limit failed\n"); + break; + + default: + ret = -EINVAL; + } + + mutex_unlock(&info->lock); + return ret; +} + +static int sc2731_charger_usb_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct sc2731_charger_info *info = power_supply_get_drvdata(psy); + int ret = 0; + u32 cur; + + mutex_lock(&info->lock); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (info->charging) + val->intval = sc2731_charger_get_status(info); + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + if (!info->charging) { + val->intval = 0; + } else { + ret = sc2731_charger_get_current(info, &cur); + if (ret) + goto out; + + val->intval = cur * 1000; + } + break; + + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + if (!info->charging) { + val->intval = 0; + } else { + ret = sc2731_charger_get_current_limit(info, &cur); + if (ret) + goto out; + + val->intval = cur * 1000; + } + break; + + default: + ret = -EINVAL; + } + +out: + mutex_unlock(&info->lock); + return ret; +} + +static int sc2731_charger_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = 1; + break; + + default: + ret = 0; + } + + return ret; +} + +static enum power_supply_property sc2731_usb_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, +}; + +static const struct power_supply_desc sc2731_charger_desc = { + .name = "sc2731_charger", + .type = POWER_SUPPLY_TYPE_USB, + .properties = sc2731_usb_props, + .num_properties = ARRAY_SIZE(sc2731_usb_props), + .get_property = sc2731_charger_usb_get_property, + .set_property = sc2731_charger_usb_set_property, + .property_is_writeable = sc2731_charger_property_is_writeable, +}; + +static int sc2731_charger_usb_change(struct notifier_block *nb, + unsigned long limit, void *data) +{ + struct sc2731_charger_info *info = + container_of(nb, struct sc2731_charger_info, usb_notify); + int ret = 0; + + mutex_lock(&info->lock); + + if (limit > 0) { + /* set current limitation and start to charge */ + ret = sc2731_charger_set_current_limit(info, limit); + if (ret) + goto out; + + ret = sc2731_charger_set_current(info, limit); + if (ret) + goto out; + + ret = sc2731_charger_start_charge(info); + if (ret) + goto out; + + info->charging = true; + } else { + /* Stop charging */ + info->charging = false; + sc2731_charger_stop_charge(info); + } + +out: + mutex_unlock(&info->lock); + return ret; +} + +static int sc2731_charger_hw_init(struct sc2731_charger_info *info) +{ + struct power_supply_battery_info bat_info = { }; + u32 term_currrent, term_voltage, cur_val, vol_val; + int ret; + + /* Enable charger module */ + ret = regmap_update_bits(info->regmap, SC2731_MODULE_EN1, + SC2731_CHARGE_EN, SC2731_CHARGE_EN); + if (ret) + return ret; + + ret = power_supply_get_battery_info(info->psy_usb, &bat_info); + if (ret) { + dev_warn(info->dev, "no battery information is supplied\n"); + + /* + * If no battery information is supplied, we should set + * default charge termination current to 120 mA, and default + * charge termination voltage to 4.35V. + */ + cur_val = 0x2; + vol_val = 0x1; + } else { + term_currrent = bat_info.charge_term_current_ua / 1000; + + if (term_currrent <= 90) + cur_val = 0; + else if (term_currrent >= 265) + cur_val = 0x7; + else + cur_val = ((term_currrent - 90) / 25) + 1; + + term_voltage = bat_info.constant_charge_voltage_max_uv / 1000; + + if (term_voltage > 4500) + term_voltage = 4500; + + if (term_voltage > 4200) + vol_val = (term_voltage - 4200) / 100; + else + vol_val = 0; + } + + /* Set charge termination current */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG2, + SC2731_TERMINATION_CUR_MASK, cur_val); + if (ret) + goto error; + + /* Set charge termination voltage */ + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0, + SC2731_TERMINATION_VOL_MASK | + SC2731_TERMINATION_VOL_CAL_MASK, + (vol_val << SC2731_TERMINATION_VOL_SHIFT) | + (0x6 << SC2731_TERMINATION_VOL_CAL_SHIFT)); + if (ret) + goto error; + + return 0; + +error: + regmap_update_bits(info->regmap, SC2731_MODULE_EN1, SC2731_CHARGE_EN, 0); + return ret; +} + +static int sc2731_charger_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sc2731_charger_info *info; + struct power_supply_config charger_cfg = { }; + int ret; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + mutex_init(&info->lock); + info->dev = &pdev->dev; + + info->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!info->regmap) { + dev_err(&pdev->dev, "failed to get charger regmap\n"); + return -ENODEV; + } + + ret = of_property_read_u32(np, "reg", &info->base); + if (ret) { + dev_err(&pdev->dev, "failed to get register address\n"); + return -ENODEV; + } + + charger_cfg.drv_data = info; + charger_cfg.of_node = np; + info->psy_usb = devm_power_supply_register(&pdev->dev, + &sc2731_charger_desc, + &charger_cfg); + if (IS_ERR(info->psy_usb)) { + dev_err(&pdev->dev, "failed to register power supply\n"); + return PTR_ERR(info->psy_usb); + } + + ret = sc2731_charger_hw_init(info); + if (ret) + return ret; + + info->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0); + if (IS_ERR(info->usb_phy)) { + dev_err(&pdev->dev, "failed to find USB phy\n"); + return PTR_ERR(info->usb_phy); + } + + info->usb_notify.notifier_call = sc2731_charger_usb_change; + ret = usb_register_notifier(info->usb_phy, &info->usb_notify); + if (ret) { + dev_err(&pdev->dev, "failed to register notifier: %d\n", ret); + return ret; + } + + return 0; +} + +static int sc2731_charger_remove(struct platform_device *pdev) +{ + struct sc2731_charger_info *info = platform_get_drvdata(pdev); + + usb_unregister_notifier(info->usb_phy, &info->usb_notify); + + return 0; +} + +static const struct of_device_id sc2731_charger_of_match[] = { + { .compatible = "sprd,sc2731-charger", }, + { } +}; + +static struct platform_driver sc2731_charger_driver = { + .driver = { + .name = "sc2731-charger", + .of_match_table = sc2731_charger_of_match, + }, + .probe = sc2731_charger_probe, + .remove = sc2731_charger_remove, +}; + +module_platform_driver(sc2731_charger_driver); + +MODULE_DESCRIPTION("Spreadtrum SC2731 Charger Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c index bbcaee56db9d..80582c8f98fa 100644 --- a/drivers/power/supply/twl4030_charger.c +++ b/drivers/power/supply/twl4030_charger.c @@ -420,7 +420,8 @@ static void twl4030_current_worker(struct work_struct *data) if (v < USB_MIN_VOLT) { /* Back up and stop adjusting. */ - bci->usb_cur -= USB_CUR_STEP; + if (bci->usb_cur >= USB_CUR_STEP) + bci->usb_cur -= USB_CUR_STEP; bci->usb_cur_target = bci->usb_cur; } else if (bci->usb_cur >= bci->usb_cur_target || bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) { @@ -439,6 +440,7 @@ static void twl4030_current_worker(struct work_struct *data) static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) { int ret; + u32 reg; if (bci->usb_mode == CHARGE_OFF) enable = false; @@ -452,14 +454,38 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable) bci->usb_enabled = 1; } - if (bci->usb_mode == CHARGE_AUTO) + if (bci->usb_mode == CHARGE_AUTO) { + /* Enable interrupts now. */ + reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | + TWL4030_TBATOR2 | TWL4030_TBATOR1 | + TWL4030_BATSTS); + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, + TWL4030_INTERRUPTS_BCIIMR1A); + if (ret < 0) { + dev_err(bci->dev, + "failed to unmask interrupts: %d\n", + ret); + return ret; + } /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */ ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB); + } /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */ ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0, TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4); if (bci->usb_mode == CHARGE_LINEAR) { + /* Enable interrupts now. */ + reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 | + TWL4030_TBATOR1 | TWL4030_BATSTS); + ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg, + TWL4030_INTERRUPTS_BCIIMR1A); + if (ret < 0) { + dev_err(bci->dev, + "failed to unmask interrupts: %d\n", + ret); + return ret; + } twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0); /* Watch dog key: WOVF acknowledge */ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33, diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 7690f0793965..5fd0e429f472 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -3103,6 +3103,16 @@ struct ec_params_usb_pd_info_request { uint8_t port; } __packed; +/* + * This command will return the number of USB PD charge port + the number + * of dedicated port present. + * EC_CMD_USB_PD_PORTS does NOT include the dedicated ports + */ +#define EC_CMD_CHARGE_PORT_COUNT 0x0105 +struct ec_response_charge_port_count { + uint8_t port_count; +} __packed; + /* Read USB-PD Device discovery info */ #define EC_CMD_USB_PD_DISCOVERY 0x0113 struct ec_params_usb_pd_discovery_entry { diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h index d6355f49fbae..507c5e214c42 100644 --- a/include/linux/power/bq27xxx_battery.h +++ b/include/linux/power/bq27xxx_battery.h @@ -24,6 +24,7 @@ enum bq27xxx_chip { BQ27546, BQ27742, BQ27545, /* bq27545 */ + BQ27411, BQ27421, /* bq27421, bq27441, bq27621 */ BQ27425, BQ27426, |