diff options
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 94 |
1 files changed, 51 insertions, 43 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 00721e8807ab..4bc6f4201340 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1521,15 +1521,14 @@ static bool xhci_port_missing_cas_quirk(int port_index, int xhci_bus_resume(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int max_ports, port_index; - __le32 __iomem **port_array; struct xhci_bus_state *bus_state; - u32 temp; + __le32 __iomem **port_array; unsigned long flags; - unsigned long port_was_suspended = 0; - bool need_usb2_u3_exit = false; + int max_ports, port_index; int slot_id; int sret; + u32 next_state; + u32 temp, portsc; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -1548,68 +1547,77 @@ int xhci_bus_resume(struct usb_hcd *hcd) temp &= ~CMD_EIE; writel(temp, &xhci->op_regs->command); + /* bus specific resume for ports we suspended at bus_suspend */ + if (hcd->speed >= HCD_USB3) + next_state = XDEV_U0; + else + next_state = XDEV_RESUME; + port_index = max_ports; while (port_index--) { - /* Check whether need resume ports. If needed - resume port and disable remote wakeup */ - u32 temp; - - temp = readl(port_array[port_index]); + portsc = readl(port_array[port_index]); /* warm reset CAS limited ports stuck in polling/compliance */ if ((xhci->quirks & XHCI_MISSING_CAS) && (hcd->speed >= HCD_USB3) && xhci_port_missing_cas_quirk(port_index, port_array)) { xhci_dbg(xhci, "reset stuck port %d\n", port_index); + clear_bit(port_index, &bus_state->bus_suspended); continue; } - if (DEV_SUPERSPEED_ANY(temp)) - temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); - else - temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); - if (test_bit(port_index, &bus_state->bus_suspended) && - (temp & PORT_PLS_MASK)) { - set_bit(port_index, &port_was_suspended); - if (!DEV_SUPERSPEED_ANY(temp)) { - xhci_set_link_state(xhci, port_array, - port_index, XDEV_RESUME); - need_usb2_u3_exit = true; + /* resume if we suspended the link, and it is still suspended */ + if (test_bit(port_index, &bus_state->bus_suspended)) + switch (portsc & PORT_PLS_MASK) { + case XDEV_U3: + portsc = xhci_port_state_to_neutral(portsc); + portsc &= ~PORT_PLS_MASK; + portsc |= PORT_LINK_STROBE | next_state; + break; + case XDEV_RESUME: + /* resume already initiated */ + break; + default: + /* not in a resumeable state, ignore it */ + clear_bit(port_index, + &bus_state->bus_suspended); + break; } - } else - writel(temp, port_array[port_index]); - } - - if (need_usb2_u3_exit) { - spin_unlock_irqrestore(&xhci->lock, flags); - msleep(USB_RESUME_TIMEOUT); - spin_lock_irqsave(&xhci->lock, flags); + /* disable wake for all ports, write new link state if needed */ + portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); + writel(portsc, port_array[port_index]); } - port_index = max_ports; - while (port_index--) { - if (!(port_was_suspended & BIT(port_index))) - continue; - /* Clear PLC to poll it later after XDEV_U0 */ - xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC); - xhci_set_link_state(xhci, port_array, port_index, XDEV_U0); + /* USB2 specific resume signaling delay and U0 link state transition */ + if (hcd->speed < HCD_USB3) { + if (bus_state->bus_suspended) { + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(USB_RESUME_TIMEOUT); + spin_lock_irqsave(&xhci->lock, flags); + } + for_each_set_bit(port_index, &bus_state->bus_suspended, + BITS_PER_LONG) { + /* Clear PLC to poll it later for U0 transition */ + xhci_test_and_clear_bit(xhci, port_array, port_index, + PORT_PLC); + xhci_set_link_state(xhci, port_array, port_index, + XDEV_U0); + } } - port_index = max_ports; - while (port_index--) { - if (!(port_was_suspended & BIT(port_index))) - continue; - /* Poll and Clear PLC */ + /* poll for U0 link state complete, both USB2 and USB3 */ + for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) { sret = xhci_handshake(port_array[port_index], PORT_PLC, PORT_PLC, 10 * 1000); - if (sret) + if (sret) { xhci_warn(xhci, "port %d resume PLC timeout\n", port_index); + continue; + } xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC); slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); if (slot_id) xhci_ring_device(xhci, slot_id); } - (void) readl(&xhci->op_regs->command); bus_state->next_statechange = jiffies + msecs_to_jiffies(5); |