diff options
46 files changed, 372 insertions, 103 deletions
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index d3b6e1a4713a..5aa5926029ee 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -40,7 +40,7 @@ Optional properties: Example for a Mali-T760: gpu@ffa30000 { - compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard"; + compatible = "rockchip,rk3288-mali", "arm,mali-t760"; reg = <0xffa30000 0x10000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a208bfe367b5..61a0cb15067e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -380,7 +380,7 @@ config ARCH_EP93XX bool "EP93xx-based" select ARCH_HAS_HOLES_MEMORYMODEL select ARM_AMBA - select ARM_PATCH_PHYS_VIRT + imply ARM_PATCH_PHYS_VIRT select ARM_VIC select AUTO_ZRELADDR select CLKDEV_LOOKUP diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 895fa6cfa15a..563901e0ec07 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -75,7 +75,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pca0_pins>; interrupt-parent = <&gpio0>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -87,7 +87,7 @@ compatible = "nxp,pca9555"; pinctrl-names = "default"; interrupt-parent = <&gpio0>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index a423e8ebfb37..67e72bc72e80 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -301,25 +301,4 @@ pinctrl-names = "default"; pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; status = "okay"; - - /* VPIF capture port */ - port@0 { - vpif_input_ch0: endpoint@0 { - reg = <0>; - bus-width = <8>; - }; - - vpif_input_ch1: endpoint@1 { - reg = <1>; - bus-width = <8>; - data-shift = <8>; - }; - }; - - /* VPIF display port */ - port@1 { - vpif_output_ch0: endpoint { - bus-width = <8>; - }; - }; }; diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index b837fec70eec..a0f0916156e6 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -318,11 +318,4 @@ pinctrl-names = "default"; pinctrl-0 = <&vpif_capture_pins>; status = "okay"; - - /* VPIF capture port */ - port { - vpif_ch0: endpoint { - bus-width = <8>; - }; - }; }; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 1865976db5f9..c72a2132aa82 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -68,6 +68,34 @@ DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */ >; }; + + nandflash_pins: nandflash_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0) /* PINCTRL207 GPMC_CS0*/ + DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0) /* PINCTRL217 GPMC_ADV_ALE */ + DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0) /* PINCTRL214 GPMC_OE_RE */ + DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0) /* PINCTRL215 GPMC_BE0_CLE */ + DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0) /* PINCTRL213 GPMC_WE */ + DM816X_IOPAD(0x0b6c, MUX_MODE0) /* PINCTRL220 GPMC_WAIT */ + DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0) /* PINCTRL250 GPMC_CLK */ + DM816X_IOPAD(0x0ba4, MUX_MODE0) /* PINCTRL234 GPMC_D0 */ + DM816X_IOPAD(0x0ba8, MUX_MODE0) /* PINCTRL234 GPMC_D1 */ + DM816X_IOPAD(0x0bac, MUX_MODE0) /* PINCTRL234 GPMC_D2 */ + DM816X_IOPAD(0x0bb0, MUX_MODE0) /* PINCTRL234 GPMC_D3 */ + DM816X_IOPAD(0x0bb4, MUX_MODE0) /* PINCTRL234 GPMC_D4 */ + DM816X_IOPAD(0x0bb8, MUX_MODE0) /* PINCTRL234 GPMC_D5 */ + DM816X_IOPAD(0x0bbc, MUX_MODE0) /* PINCTRL234 GPMC_D6 */ + DM816X_IOPAD(0x0bc0, MUX_MODE0) /* PINCTRL234 GPMC_D7 */ + DM816X_IOPAD(0x0bc4, MUX_MODE0) /* PINCTRL234 GPMC_D8 */ + DM816X_IOPAD(0x0bc8, MUX_MODE0) /* PINCTRL234 GPMC_D9 */ + DM816X_IOPAD(0x0bcc, MUX_MODE0) /* PINCTRL234 GPMC_D10 */ + DM816X_IOPAD(0x0bd0, MUX_MODE0) /* PINCTRL234 GPMC_D11 */ + DM816X_IOPAD(0x0bd4, MUX_MODE0) /* PINCTRL234 GPMC_D12 */ + DM816X_IOPAD(0x0bd8, MUX_MODE0) /* PINCTRL234 GPMC_D13 */ + DM816X_IOPAD(0x0bdc, MUX_MODE0) /* PINCTRL234 GPMC_D14 */ + DM816X_IOPAD(0x0be0, MUX_MODE0) /* PINCTRL234 GPMC_D15 */ + >; + }; }; &i2c1 { @@ -90,6 +118,8 @@ &gpmc { ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; nand@0,0 { compatible = "ti,omap2-nand"; @@ -98,9 +128,11 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ #address-cells = <1>; #size-cells = <1>; ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; nand-bus-width = <16>; gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; @@ -164,7 +196,7 @@ vmmc-supply = <&vmmcsd_fixed>; bus-width = <4>; cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; }; /* At least dm8168-evm rev c won't support multipoint, later may */ diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 59cbf958fcc3..566b2a8c8b96 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -145,7 +145,7 @@ }; elm: elm@48080000 { - compatible = "ti,816-elm"; + compatible = "ti,am3352-elm"; ti,hwmods = "elm"; reg = <0x48080000 0x2000>; interrupts = <4>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 4d57a55473af..a6298eb56978 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -190,7 +190,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,impedance-control = <0x1f>; + ti,min-output-impedance; }; dp83867_1: ethernet-phy@3 { @@ -198,7 +198,7 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,impedance-control = <0x1f>; + ti,min-output-impedance; }; }; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 497a9470c888..5739389f5bb8 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -59,6 +59,9 @@ compatible = "samsung,exynos4210-audss-clock"; reg = <0x03810000 0x0C>; #clock-cells = <1>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + <&clock CLK_SCLK_AUDIO0>, <&clock CLK_SCLK_AUDIO0>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; i2s0: i2s@03830000 { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 2484f11761ea..858e1fed762a 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1126,8 +1126,8 @@ }; }; - gpu: mali@ffa30000 { - compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard"; + gpu: gpu@ffa30000 { + compatible = "rockchip,rk3288-mali", "arm,mali-t760"; reg = <0xffa30000 0x10000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 8923ba625b76..19a8f4fcfab5 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -44,7 +44,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun8i-a83t-ccu.h> #include <dt-bindings/clock/sun8i-r-ccu.h> +#include <dt-bindings/reset/sun8i-a83t-ccu.h> / { interrupt-parent = <&gic>; @@ -175,8 +177,8 @@ compatible = "allwinner,sun8i-a83t-dma"; reg = <0x01c02000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 21>; - resets = <&ccu 7>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; @@ -195,7 +197,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01c20800 0x400>; - clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -247,8 +249,8 @@ "allwinner,sun8i-h3-spdif"; reg = <0x01c21000 0x400>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 44>, <&ccu 76>; - resets = <&ccu 32>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_BUS_SPDIF>; clock-names = "apb", "spdif"; dmas = <&dma 2>; dma-names = "tx"; @@ -263,8 +265,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 53>; - resets = <&ccu 40>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 6f2162608006..d38282b9e5d4 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -394,7 +394,7 @@ emac: ethernet@1c30000 { compatible = "allwinner,sun8i-h3-emac"; syscon = <&syscon>; - reg = <0x01c30000 0x104>; + reg = <0x01c30000 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; resets = <&ccu RST_BUS_EMAC>; diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts index 86d8df98802f..13bcc460bcb2 100644 --- a/arch/arm/boot/dts/tango4-vantage-1172.dts +++ b/arch/arm/boot/dts/tango4-vantage-1172.dts @@ -22,7 +22,7 @@ }; ð0 { - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-id"; phy-handle = <ð0_phy>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index b5625d009288..e568c8c6f69c 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -1166,7 +1166,7 @@ static struct tvp514x_platform_data tvp5146_pdata = { #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) -static const struct vpif_input da850_ch0_inputs[] = { +static struct vpif_input da850_ch0_inputs[] = { { .input = { .index = 0, @@ -1181,7 +1181,7 @@ static const struct vpif_input da850_ch0_inputs[] = { }, }; -static const struct vpif_input da850_ch1_inputs[] = { +static struct vpif_input da850_ch1_inputs[] = { { .input = { .index = 0, diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index f5dce9b4e617..f77a4f766050 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -218,6 +218,15 @@ int clk_set_parent(struct clk *clk, struct clk *parent) } EXPORT_SYMBOL(clk_set_parent); +struct clk *clk_get_parent(struct clk *clk) +{ + if (!clk) + return NULL; + + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + int clk_register(struct clk *clk) { if (clk == NULL || IS_ERR(clk)) diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 39ef3b613912..beec5f16443a 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -475,6 +475,26 @@ int clk_set_rate(struct clk *clk, unsigned long rate) } EXPORT_SYMBOL(clk_set_rate); +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 7a0c13bf4269..844e8ac593e2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -95,8 +95,10 @@ static inline void __indirect_writeb(u8 value, volatile void __iomem *p) } static inline void __indirect_writesb(volatile void __iomem *bus_addr, - const u8 *vaddr, int count) + const void *p, int count) { + const u8 *vaddr = p; + while (count--) writeb(*vaddr++, bus_addr); } @@ -118,8 +120,10 @@ static inline void __indirect_writew(u16 value, volatile void __iomem *p) } static inline void __indirect_writesw(volatile void __iomem *bus_addr, - const u16 *vaddr, int count) + const void *p, int count) { + const u16 *vaddr = p; + while (count--) writew(*vaddr++, bus_addr); } @@ -137,8 +141,9 @@ static inline void __indirect_writel(u32 value, volatile void __iomem *p) } static inline void __indirect_writesl(volatile void __iomem *bus_addr, - const u32 *vaddr, int count) + const void *p, int count) { + const u32 *vaddr = p; while (count--) writel(*vaddr++, bus_addr); } @@ -160,8 +165,10 @@ static inline u8 __indirect_readb(const volatile void __iomem *p) } static inline void __indirect_readsb(const volatile void __iomem *bus_addr, - u8 *vaddr, u32 count) + void *p, u32 count) { + u8 *vaddr = p; + while (count--) *vaddr++ = readb(bus_addr); } @@ -183,8 +190,10 @@ static inline u16 __indirect_readw(const volatile void __iomem *p) } static inline void __indirect_readsw(const volatile void __iomem *bus_addr, - u16 *vaddr, u32 count) + void *p, u32 count) { + u16 *vaddr = p; + while (count--) *vaddr++ = readw(bus_addr); } @@ -204,8 +213,10 @@ static inline u32 __indirect_readl(const volatile void __iomem *p) } static inline void __indirect_readsl(const volatile void __iomem *bus_addr, - u32 *vaddr, u32 count) + void *p, u32 count) { + u32 *vaddr = p; + while (count--) *vaddr++ = readl(bus_addr); } @@ -523,8 +534,15 @@ static inline void iowrite32_rep(void __iomem *addr, const void *vaddr, #endif } -#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET)) -#define ioport_unmap(addr) +#define ioport_map(port, nr) ioport_map(port, nr) +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return ((void __iomem*)((port) + PIO_OFFSET)); +} +#define ioport_unmap(addr) ioport_unmap(addr) +static inline void ioport_unmap(void __iomem *addr) +{ +} #endif /* CONFIG_PCI */ #endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c index 3330ac7cfbef..671c7a09ab3d 100644 --- a/arch/arm/mach-mmp/devices.c +++ b/arch/arm/mach-mmp/devices.c @@ -238,7 +238,7 @@ void pxa_usb_phy_deinit(void __iomem *phy_reg) #endif #if IS_ENABLED(CONFIG_USB_SUPPORT) -static u64 usb_dma_mask = ~(u32)0; +static u64 __maybe_unused usb_dma_mask = ~(u32)0; #if IS_ENABLED(CONFIG_USB_MV_UDC) struct resource pxa168_u2o_resources[] = { diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index e62273aacb43..4ffbbd217e82 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -211,7 +211,7 @@ static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr) return PTR_ERR(base); writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG); - writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG); + writel(__pa_symbol(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG); iounmap(base); diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 6613a6ff5dbc..6cbc69c92913 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -510,6 +510,7 @@ static void __init ams_delta_init(void) static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) { struct modem_private_data *priv = port->private_data; + int ret; if (IS_ERR(priv->regulator)) return; @@ -518,9 +519,16 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) return; if (state == 0) - regulator_enable(priv->regulator); + ret = regulator_enable(priv->regulator); else if (old == 0) - regulator_disable(priv->regulator); + ret = regulator_disable(priv->regulator); + else + ret = 0; + + if (ret) + dev_warn(port->dev, + "ams_delta modem_pm: failed to %sable regulator: %d\n", + state ? "dis" : "en", ret); } static struct plat_serial8250_port ams_delta_modem_ports[] = { diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 4dfb99504810..95ac1929aede 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -441,13 +441,11 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { { .chip_select = 0, } }; -#ifdef CONFIG_PM static irqreturn_t osk_mistral_wake_interrupt(int irq, void *ignored) { return IRQ_HANDLED; } -#endif static void __init osk_mistral_init(void) { @@ -515,7 +513,6 @@ static void __init osk_mistral_init(void) gpio_direction_input(OMAP_MPUIO(2)); irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); -#ifdef CONFIG_PM /* share the IRQ in case someone wants to use the * button for more than wakeup from system sleep. */ @@ -529,7 +526,6 @@ static void __init osk_mistral_init(void) ret); } else enable_irq_wake(irq); -#endif } else printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index dc9e34e670a2..b1e661bb5521 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -28,7 +28,7 @@ static const struct of_device_id omap_dt_match_table[] __initconst = { { } }; -static void __init omap_generic_init(void) +static void __init __maybe_unused omap_generic_init(void) { pdata_quirks_init(omap_dt_match_table); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 1d739d1a0a65..1cd20e4d56b0 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -410,7 +410,7 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } -static void __init omap_hwmod_init_postsetup(void) +static void __init __maybe_unused omap_hwmod_init_postsetup(void) { u8 postsetup_state; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index d44e0e2f1106..841ba19d64a6 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -486,7 +486,6 @@ int __init omap3_pm_init(void) ret = request_irq(omap_prcm_event_to_irq("io"), _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", omap3_pm_init); - enable_irq(omap_prcm_event_to_irq("io")); if (ret) { pr_err("pm: Failed to request pm_io irq\n"); diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 382e236fbfd9..64f6451499a7 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -692,7 +692,6 @@ static int omap3xxx_prm_late_init(void) { struct device_node *np; int irq_num; - int ret; if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; @@ -712,12 +711,8 @@ static int omap3xxx_prm_late_init(void) } omap3xxx_prm_enable_io_wakeup(); - ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - if (!ret) - irq_set_status_flags(omap_prcm_event_to_irq("io"), - IRQ_NOAUTOEN); - return ret; + return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); } static void __exit omap3xxx_prm_exit(void) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 87e86a4a9ead..3ab5df1ce900 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -337,6 +337,27 @@ static void omap44xx_prm_reconfigure_io_chain(void) } /** + * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches + * + * Activates the I/O wakeup event latches and allows events logged by + * those latches to signal a wakeup event to the PRCM. For I/O wakeups + * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and + * omap44xx_prm_reconfigure_io_chain() must be called. No return value. + */ +static void __init omap44xx_prm_enable_io_wakeup(void) +{ + s32 inst = omap4_prmst_get_prm_dev_inst(); + + if (inst == PRM_INSTANCE_UNKNOWN) + return; + + omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK, + OMAP4430_GLOBAL_WUEN_MASK, + inst, + omap4_prcm_irq_setup.pm_ctrl); +} + +/** * omap44xx_prm_read_reset_sources - return the last SoC reset source * * Return a u32 representing the last reset sources of the SoC. The @@ -668,6 +689,8 @@ struct pwrdm_ops omap4_pwrdm_operations = { .pwrdm_has_voltdm = omap4_check_vcvp, }; +static int omap44xx_prm_late_init(void); + /* * XXX document */ @@ -675,6 +698,7 @@ static struct prm_ll_data omap44xx_prm_ll_data = { .read_reset_sources = &omap44xx_prm_read_reset_sources, .was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old, .clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old, + .late_init = &omap44xx_prm_late_init, .assert_hardreset = omap4_prminst_assert_hardreset, .deassert_hardreset = omap4_prminst_deassert_hardreset, .is_hardreset_asserted = omap4_prminst_is_hardreset_asserted, @@ -711,6 +735,37 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data) return prm_register(&omap44xx_prm_ll_data); } +static int omap44xx_prm_late_init(void) +{ + int irq_num; + + if (!(prm_features & PRM_HAS_IO_WAKEUP)) + return 0; + + irq_num = of_irq_get(prm_init_data->np, 0); + /* + * Already have OMAP4 IRQ num. For all other platforms, we need + * IRQ numbers from DT + */ + if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) { + if (irq_num == -EPROBE_DEFER) + return irq_num; + + /* Have nothing to do */ + return 0; + } + + /* Once OMAP4 DT is filled as well */ + if (irq_num >= 0) { + omap4_prcm_irq_setup.irq = irq_num; + omap4_prcm_irq_setup.xlate_irq = NULL; + } + + omap44xx_prm_enable_io_wakeup(); + + return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); +} + static void __exit omap44xx_prm_exit(void) { prm_unregister(&omap44xx_prm_ll_data); diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c index 8cadb302a7d2..ffe05c27087e 100644 --- a/arch/arm/mach-prima2/common.c +++ b/arch/arm/mach-prima2/common.c @@ -15,7 +15,7 @@ #include <linux/of_platform.h> #include "common.h" -static void __init sirfsoc_init_late(void) +static void __init __maybe_unused sirfsoc_init_late(void) { sirfsoc_pm_init(); } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 76fbc115ec33..ce7d97babb0f 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -566,6 +566,7 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select FB_W100 + select FB select PXA25x config MACH_E330 diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index 990d2bf2fb45..9bf4ea6a6f74 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -17,11 +17,15 @@ #include <mach/regs-ost.h> -#define xip_irqpending() (ICIP & ICMR) +/* restored July 2017, this did not build since 2011! */ + +#define ICIP io_p2v(0x40d00000) +#define ICMR io_p2v(0x40d00004) +#define xip_irqpending() (readl(ICIP) & readl(ICMR)) /* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() (OSCR) -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) +#define xip_currtime() readl(OSCR) +#define xip_elapsed_since(x) (signed)((readl(OSCR) - (x)) / 4) /* * xip_cpu_idle() is used when waiting for a delay equal or larger than diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h index aa79fa47373a..622d4e5df029 100644 --- a/arch/arm/mach-rpc/include/mach/hardware.h +++ b/arch/arm/mach-rpc/include/mach/hardware.h @@ -25,8 +25,8 @@ * *_SIZE is the size of the region * *_BASE is the virtual address */ -#define RAM_SIZE 0x10000000 -#define RAM_START 0x10000000 +#define RPC_RAM_SIZE 0x10000000 +#define RPC_RAM_START 0x10000000 #define EASI_SIZE 0x08000000 /* EASI I/O */ #define EASI_START 0x08000000 diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index 0db46895c82a..7d52cd97d96e 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -35,6 +35,31 @@ struct clk clk_##_name = { \ static DEFINE_SPINLOCK(clocks_lock); +/* Dummy clk routine to build generic kernel parts that may be using them */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_get_rate(clk); +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return NULL; +} +EXPORT_SYMBOL(clk_get_parent); + static void clk_gpio27_enable(struct clk *clk) { /* diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h index b3d684098fbf..cb76096a2e36 100644 --- a/arch/arm/mach-sa1100/include/mach/mtd-xip.h +++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h @@ -20,7 +20,7 @@ #define xip_irqpending() (ICIP & ICMR) /* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() (OSCR) -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) +#define xip_currtime() readl_relaxed(OSCR) +#define xip_elapsed_since(x) (signed)((readl_relaxed(OSCR) - (x)) / 4) #endif /* __ARCH_SA1100_MTD_XIP_H__ */ diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index 73e3adbc1330..44438f344dc8 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -67,8 +67,12 @@ static int regulator_quirk_notify(struct notifier_block *nb, { struct device *dev = data; struct i2c_client *client; + static bool done; u32 mon; + if (done) + return 0; + mon = ioread32(irqc + IRQC_MONITOR); dev_dbg(dev, "%s: %ld, IRQC_MONITOR = 0x%x\n", __func__, action, mon); if (mon & REGULATOR_IRQ_MASK) @@ -99,7 +103,7 @@ static int regulator_quirk_notify(struct notifier_block *nb, remove: dev_info(dev, "IRQ2 is not asserted, removing quirk\n"); - bus_unregister_notifier(&i2c_bus_type, nb); + done = true; iounmap(irqc); return 0; } diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c index ac6fd1a2cb59..3f93fac98d97 100644 --- a/arch/arm/mach-w90x900/clock.c +++ b/arch/arm/mach-w90x900/clock.c @@ -93,3 +93,32 @@ void nuc900_subclk_enable(struct clk *clk, int enable) __raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK); } + +/* dummy functions, should not be called */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + WARN_ON(clk); + return 0; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + WARN_ON(clk); + return NULL; +} +EXPORT_SYMBOL(clk_get_parent); diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 9d00622ce845..bd0f33b77f57 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -452,7 +452,7 @@ emac: ethernet@1c30000 { compatible = "allwinner,sun50i-a64-emac"; syscon = <&syscon>; - reg = <0x01c30000 0x100>; + reg = <0x01c30000 0x10000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; resets = <&ccu RST_BUS_EMAC>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 35b8c88c3220..738ed689ff69 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -400,7 +400,7 @@ }; pwm_AO_ab: pwm@550 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm"; reg = <0x0 0x00550 0x0 0x10>; #pwm-cells = <3>; status = "disabled"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 72c5a9f64ca8..94567eb17875 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -109,8 +109,8 @@ status = "okay"; pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; + clocks = <&xtal> , <&xtal>; + clock-names = "clkin0", "clkin1" ; }; &pwm_ef { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 890821d6e52b..266fbcf3e47f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -10,12 +10,20 @@ #include <dt-bindings/input/input.h> -#include "meson-gxl-s905x-p212.dtsi" +#include "meson-gxl-s905x.dtsi" / { compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; model = "Libre Technology CC"; + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + cvbs-connector { compatible = "composite-video-connector"; @@ -26,6 +34,11 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -53,6 +66,39 @@ linux,default-trigger = "heartbeat"; }; }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-gpio"; + + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &cvbs_vdac_port { @@ -61,6 +107,16 @@ }; }; +ðmac { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -73,20 +129,43 @@ }; }; -/* - * The following devices exists but are exposed on the general - * purpose GPIO header. End user may well decide to use those pins - * for another purpose - */ +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; -&sd_emmc_a { - status = "disabled"; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_card>; }; -&uart_A { - status = "disabled"; +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <50000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; }; -&wifi32k { - status = "disabled"; +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index dbcc3d4e2ed5..51763d674050 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -219,7 +219,7 @@ reg = <0x18800 0x100>, <0x18C00 0x20>; gpiosb: gpio { #gpio-cells = <2>; - gpio-ranges = <&pinctrl_sb 0 0 29>; + gpio-ranges = <&pinctrl_sb 0 0 30>; gpio-controller; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index 726528ce54e9..4c68605675a8 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -270,6 +270,7 @@ interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cpm_clk 1 26>; + dma-coherent; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 95f8e5f607f6..923f354b02f0 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -64,7 +64,7 @@ compatible = "marvell,armada-8k-rtc"; reg = <0x284000 0x20>, <0x284080 0x24>; reg-names = "rtc", "rtc-soc"; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; }; cps_ethernet: ethernet@0 { @@ -261,6 +261,7 @@ interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; clocks = <&cps_clk 1 26>; + dma-coherent; /* * The cryptographic engine found on the cp110 * master is enabled by default at the SoC diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index aef35e0b685a..a451996f590a 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -508,7 +508,7 @@ /* audio_clkout0/1/2/3 */ #clock-cells = <1>; - clock-frequency = <11289600 12288000>; + clock-frequency = <12288000 11289600>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index b5c6ee07d7f9..d1a3f3b7a0ab 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -281,7 +281,7 @@ /* audio_clkout0/1/2/3 */ #clock-cells = <1>; - clock-frequency = <11289600 12288000>; + clock-frequency = <12288000 11289600>; status = "okay"; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 6c7d147eed54..b4ca115b3be1 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -476,6 +476,7 @@ CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y +CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c index 1e6e0269edcc..f76be6bd6eb3 100644 --- a/drivers/bus/uniphier-system-bus.c +++ b/drivers/bus/uniphier-system-bus.c @@ -256,10 +256,23 @@ static int uniphier_system_bus_probe(struct platform_device *pdev) uniphier_system_bus_set_reg(priv); + platform_set_drvdata(pdev, priv); + /* Now, the bus is configured. Populate platform_devices below it */ return of_platform_default_populate(dev->of_node, NULL, dev); } +static int __maybe_unused uniphier_system_bus_resume(struct device *dev) +{ + uniphier_system_bus_set_reg(dev_get_drvdata(dev)); + + return 0; +} + +static const struct dev_pm_ops uniphier_system_bus_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(NULL, uniphier_system_bus_resume) +}; + static const struct of_device_id uniphier_system_bus_match[] = { { .compatible = "socionext,uniphier-system-bus" }, { /* sentinel */ } @@ -271,6 +284,7 @@ static struct platform_driver uniphier_system_bus_driver = { .driver = { .name = "uniphier-system-bus", .of_match_table = uniphier_system_bus_match, + .pm = &uniphier_system_bus_pm_ops, }, }; module_platform_driver(uniphier_system_bus_driver); diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig index 20bde38ce2f9..e9d750c510cd 100644 --- a/drivers/soc/zte/Kconfig +++ b/drivers/soc/zte/Kconfig @@ -2,6 +2,7 @@ # ZTE SoC drivers # menuconfig SOC_ZTE + depends on ARCH_ZX || COMPILE_TEST bool "ZTE SoC driver support" if SOC_ZTE |