diff options
| -rw-r--r-- | drivers/mtd/nand/pxa3xx_nand.c | 77 |
1 files changed, 1 insertions, 76 deletions
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 3264b1d5a638..be0aa44ada42 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -258,25 +258,6 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_info *info, nand_writel(info, NDTR1CS0, ndtr1); } -#define WAIT_EVENT_TIMEOUT 10 - -static int wait_for_event(struct pxa3xx_nand_info *info, uint32_t event) -{ - int timeout = WAIT_EVENT_TIMEOUT; - uint32_t ndsr; - - while (timeout--) { - ndsr = nand_readl(info, NDSR) & NDSR_MASK; - if (ndsr & event) { - nand_writel(info, NDSR, ndsr); - return 0; - } - udelay(10); - } - - return -ETIMEDOUT; -} - static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) { int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; @@ -414,35 +395,6 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask) nand_writel(info, NDCR, ndcr | int_mask); } -/* NOTE: it is a must to set ND_RUN firstly, then write command buffer - * otherwise, it does not work - */ -static int write_cmd(struct pxa3xx_nand_info *info) -{ - uint32_t ndcr; - - /* clear status bits and run */ - nand_writel(info, NDSR, NDSR_MASK); - - ndcr = info->reg_ndcr; - - ndcr |= info->use_ecc ? NDCR_ECC_EN : 0; - ndcr |= info->use_dma ? NDCR_DMA_EN : 0; - ndcr |= NDCR_ND_RUN; - - nand_writel(info, NDCR, ndcr); - - if (wait_for_event(info, NDSR_WRCMDREQ)) { - printk(KERN_ERR "timed out writing command\n"); - return -ETIMEDOUT; - } - - nand_writel(info, NDCB0, info->ndcb0); - nand_writel(info, NDCB0, info->ndcb1); - nand_writel(info, NDCB0, info->ndcb2); - return 0; -} - static void handle_data_pio(struct pxa3xx_nand_info *info) { switch (info->state) { @@ -778,33 +730,6 @@ static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this) return 0; } -static int __readid(struct pxa3xx_nand_info *info, uint32_t *id) -{ - const struct pxa3xx_nand_cmdset *cmdset = info->cmdset; - uint32_t ndcr; - uint8_t id_buff[8]; - - prepare_other_cmd(info, cmdset->read_id); - - /* Send command */ - if (write_cmd(info)) - goto fail_timeout; - - /* Wait for CMDDM(command done successfully) */ - if (wait_for_event(info, NDSR_RDDREQ)) - goto fail_timeout; - - __raw_readsl(info->mmio_base + NDDB, id_buff, 2); - *id = id_buff[0] | (id_buff[1] << 8); - return 0; - -fail_timeout: - ndcr = nand_readl(info, NDCR); - nand_writel(info, NDCR, ndcr & ~NDCR_ND_RUN); - udelay(10); - return -ETIMEDOUT; -} - static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info, const struct pxa3xx_nand_flash *f) { @@ -857,7 +782,7 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info) page_per_block = ndcr & NDCR_PG_PER_BLK ? 64 : 32; info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512; - /* set info fields needed to __readid */ + /* set info fields needed to read id */ info->read_id_bytes = (info->page_size == 2048) ? 4 : 2; info->reg_ndcr = ndcr; info->cmdset = &default_cmdset; |