summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lp8860.txt29
-rw-r--r--drivers/leds/Kconfig11
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/led-class.c29
-rw-r--r--drivers/leds/led-core.c36
-rw-r--r--drivers/leds/led-triggers.c16
-rw-r--r--drivers/leds/leds-lp8860.c491
-rw-r--r--drivers/leds/leds-regulator.c18
-rw-r--r--drivers/leds/leds-syscon.c71
-rw-r--r--drivers/leds/leds.h20
-rw-r--r--drivers/leds/trigger/ledtrig-backlight.c8
-rw-r--r--drivers/leds/trigger/ledtrig-default-on.c2
-rw-r--r--drivers/leds/trigger/ledtrig-gpio.c6
-rw-r--r--drivers/leds/trigger/ledtrig-heartbeat.c2
-rw-r--r--drivers/leds/trigger/ledtrig-oneshot.c4
-rw-r--r--drivers/leds/trigger/ledtrig-transient.c10
-rw-r--r--include/linux/leds.h40
17 files changed, 714 insertions, 80 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
new file mode 100644
index 000000000000..aad38dd94d4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -0,0 +1,29 @@
+* Texas Instruments - lp8860 4-Channel LED Driver
+
+The LP8860-Q1 is an high-efficiency LED
+driver with boost controller. It has 4 high-precision
+current sinks that can be controlled by a PWM input
+signal, a SPI/I2C master, or both.
+
+Required properties:
+ - compatible:
+ "ti,lp8860"
+ - reg - I2C slave address
+ - label - Used for naming LEDs
+
+Optional properties:
+ - enable-gpio - gpio pin to enable/disable the device.
+ - supply - "vled" - LED supply
+
+Example:
+
+leds: leds@6 {
+ compatible = "ti,lp8860";
+ reg = <0x2d>;
+ label = "display_cluster";
+ enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+}
+
+For more product information please see the link below:
+http://www.ti.com/product/lp8860-q1
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a210338cfeb1..a6c3d2f153f3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -250,6 +250,17 @@ config LEDS_LP8788
help
This option enables support for the Keyboard LEDs on the LP8788 PMIC.
+config LEDS_LP8860
+ tristate "LED support for the TI LP8860 4 channel LED driver"
+ depends on LEDS_CLASS && I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the TI LP8860 4 channel
+ LED driver.
+ This option enables support for the display cluster LEDs
+ on the LP8860 4 channel LED driver using the I2C communication
+ bus.
+
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index a2b164741465..1c65a191d907 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
obj-$(CONFIG_LEDS_LP5562) += leds-lp5562.o
obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
+obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o
obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 7440c58b8e6f..dbeebac38d31 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -40,17 +40,27 @@ static ssize_t brightness_store(struct device *dev,
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
unsigned long state;
- ssize_t ret = -EINVAL;
+ ssize_t ret;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (led_sysfs_is_disabled(led_cdev)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
ret = kstrtoul(buf, 10, &state);
if (ret)
- return ret;
+ goto unlock;
if (state == LED_OFF)
led_trigger_remove(led_cdev);
- __led_set_brightness(led_cdev, state);
+ led_set_brightness(led_cdev, state);
- return size;
+ ret = size;
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
}
static DEVICE_ATTR_RW(brightness);
@@ -99,7 +109,7 @@ static void led_timer_function(unsigned long data)
unsigned long delay;
if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
- __led_set_brightness(led_cdev, LED_OFF);
+ led_set_brightness_async(led_cdev, LED_OFF);
return;
}
@@ -122,7 +132,7 @@ static void led_timer_function(unsigned long data)
delay = led_cdev->blink_delay_off;
}
- __led_set_brightness(led_cdev, brightness);
+ led_set_brightness_async(led_cdev, brightness);
/* Return in next iteration if led is in one-shot mode and we are in
* the final blink state so that the led is toggled each delay_on +
@@ -148,7 +158,7 @@ static void set_brightness_delayed(struct work_struct *ws)
led_stop_software_blink(led_cdev);
- __led_set_brightness(led_cdev, led_cdev->delayed_set_value);
+ led_set_brightness_async(led_cdev, led_cdev->delayed_set_value);
}
/**
@@ -214,6 +224,7 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
#ifdef CONFIG_LEDS_TRIGGERS
init_rwsem(&led_cdev->trigger_lock);
#endif
+ mutex_init(&led_cdev->led_access);
/* add to the list of leds */
down_write(&leds_list_lock);
list_add_tail(&led_cdev->node, &leds_list);
@@ -222,6 +233,8 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
if (!led_cdev->max_brightness)
led_cdev->max_brightness = LED_FULL;
+ led_cdev->flags |= SET_BRIGHTNESS_ASYNC;
+
led_update_brightness(led_cdev);
INIT_WORK(&led_cdev->set_brightness_work, set_brightness_delayed);
@@ -267,6 +280,8 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
down_write(&leds_list_lock);
list_del(&led_cdev->node);
up_write(&leds_list_lock);
+
+ mutex_destroy(&led_cdev->led_access);
}
EXPORT_SYMBOL_GPL(led_classdev_unregister);
diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index aaa8eba9099f..9886dace5ad2 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -42,13 +42,13 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
/* never on - just set to off */
if (!delay_on) {
- __led_set_brightness(led_cdev, LED_OFF);
+ led_set_brightness_async(led_cdev, LED_OFF);
return;
}
/* never off - just set to brightness */
if (!delay_off) {
- __led_set_brightness(led_cdev, led_cdev->blink_brightness);
+ led_set_brightness_async(led_cdev, led_cdev->blink_brightness);
return;
}
@@ -117,6 +117,8 @@ EXPORT_SYMBOL_GPL(led_stop_software_blink);
void led_set_brightness(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
+ int ret = 0;
+
/* delay brightness setting if need to stop soft-blink timer */
if (led_cdev->blink_delay_on || led_cdev->blink_delay_off) {
led_cdev->delayed_set_value = brightness;
@@ -124,7 +126,17 @@ void led_set_brightness(struct led_classdev *led_cdev,
return;
}
- __led_set_brightness(led_cdev, brightness);
+ if (led_cdev->flags & SET_BRIGHTNESS_ASYNC) {
+ led_set_brightness_async(led_cdev, brightness);
+ return;
+ } else if (led_cdev->flags & SET_BRIGHTNESS_SYNC)
+ ret = led_set_brightness_sync(led_cdev, brightness);
+ else
+ ret = -EINVAL;
+
+ if (ret < 0)
+ dev_dbg(led_cdev->dev, "Setting LED brightness failed (%d)\n",
+ ret);
}
EXPORT_SYMBOL(led_set_brightness);
@@ -143,3 +155,21 @@ int led_update_brightness(struct led_classdev *led_cdev)
return ret;
}
EXPORT_SYMBOL(led_update_brightness);
+
+/* Caller must ensure led_cdev->led_access held */
+void led_sysfs_disable(struct led_classdev *led_cdev)
+{
+ lockdep_assert_held(&led_cdev->led_access);
+
+ led_cdev->flags |= LED_SYSFS_DISABLE;
+}
+EXPORT_SYMBOL_GPL(led_sysfs_disable);
+
+/* Caller must ensure led_cdev->led_access held */
+void led_sysfs_enable(struct led_classdev *led_cdev)
+{
+ lockdep_assert_held(&led_cdev->led_access);
+
+ led_cdev->flags &= ~LED_SYSFS_DISABLE;
+}
+EXPORT_SYMBOL_GPL(led_sysfs_enable);
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index c3734f10fdd5..e8b1120f486d 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -37,6 +37,14 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
char trigger_name[TRIG_NAME_MAX];
struct led_trigger *trig;
size_t len;
+ int ret = count;
+
+ mutex_lock(&led_cdev->led_access);
+
+ if (led_sysfs_is_disabled(led_cdev)) {
+ ret = -EBUSY;
+ goto unlock;
+ }
trigger_name[sizeof(trigger_name) - 1] = '\0';
strncpy(trigger_name, buf, sizeof(trigger_name) - 1);
@@ -47,7 +55,7 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
if (!strcmp(trigger_name, "none")) {
led_trigger_remove(led_cdev);
- return count;
+ goto unlock;
}
down_read(&triggers_list_lock);
@@ -58,12 +66,14 @@ ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
up_write(&led_cdev->trigger_lock);
up_read(&triggers_list_lock);
- return count;
+ goto unlock;
}
}
up_read(&triggers_list_lock);
- return -EINVAL;
+unlock:
+ mutex_unlock(&led_cdev->led_access);
+ return ret;
}
EXPORT_SYMBOL_GPL(led_trigger_store);
diff --git a/drivers/leds/leds-lp8860.c b/drivers/leds/leds-lp8860.c
new file mode 100644
index 000000000000..840e93f3ab3e
--- /dev/null
+++ b/drivers/leds/leds-lp8860.c
@@ -0,0 +1,491 @@
+/*
+ * TI LP8860 4-Channel LED Driver
+ *
+ * Copyright (C) 2014 Texas Instruments
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+
+#define LP8860_DISP_CL1_BRT_MSB 0x00
+#define LP8860_DISP_CL1_BRT_LSB 0x01
+#define LP8860_DISP_CL1_CURR_MSB 0x02
+#define LP8860_DISP_CL1_CURR_LSB 0x03
+#define LP8860_CL2_BRT_MSB 0x04
+#define LP8860_CL2_BRT_LSB 0x05
+#define LP8860_CL2_CURRENT 0x06
+#define LP8860_CL3_BRT_MSB 0x07
+#define LP8860_CL3_BRT_LSB 0x08
+#define LP8860_CL3_CURRENT 0x09
+#define LP8860_CL4_BRT_MSB 0x0a
+#define LP8860_CL4_BRT_LSB 0x0b
+#define LP8860_CL4_CURRENT 0x0c
+#define LP8860_CONFIG 0x0d
+#define LP8860_STATUS 0x0e
+#define LP8860_FAULT 0x0f
+#define LP8860_LED_FAULT 0x10
+#define LP8860_FAULT_CLEAR 0x11
+#define LP8860_ID 0x12
+#define LP8860_TEMP_MSB 0x13
+#define LP8860_TEMP_LSB 0x14
+#define LP8860_DISP_LED_CURR_MSB 0x15
+#define LP8860_DISP_LED_CURR_LSB 0x16
+#define LP8860_DISP_LED_PWM_MSB 0x17
+#define LP8860_DISP_LED_PWM_LSB 0x18
+#define LP8860_EEPROM_CNTRL 0x19
+#define LP8860_EEPROM_UNLOCK 0x1a
+
+#define LP8860_EEPROM_REG_0 0x60
+#define LP8860_EEPROM_REG_1 0x61
+#define LP8860_EEPROM_REG_2 0x62
+#define LP8860_EEPROM_REG_3 0x63
+#define LP8860_EEPROM_REG_4 0x64
+#define LP8860_EEPROM_REG_5 0x65
+#define LP8860_EEPROM_REG_6 0x66
+#define LP8860_EEPROM_REG_7 0x67
+#define LP8860_EEPROM_REG_8 0x68
+#define LP8860_EEPROM_REG_9 0x69
+#define LP8860_EEPROM_REG_10 0x6a
+#define LP8860_EEPROM_REG_11 0x6b
+#define LP8860_EEPROM_REG_12 0x6c
+#define LP8860_EEPROM_REG_13 0x6d
+#define LP8860_EEPROM_REG_14 0x6e
+#define LP8860_EEPROM_REG_15 0x6f
+#define LP8860_EEPROM_REG_16 0x70
+#define LP8860_EEPROM_REG_17 0x71
+#define LP8860_EEPROM_REG_18 0x72
+#define LP8860_EEPROM_REG_19 0x73
+#define LP8860_EEPROM_REG_20 0x74
+#define LP8860_EEPROM_REG_21 0x75
+#define LP8860_EEPROM_REG_22 0x76
+#define LP8860_EEPROM_REG_23 0x77
+#define LP8860_EEPROM_REG_24 0x78
+
+#define LP8860_LOCK_EEPROM 0x00
+#define LP8860_UNLOCK_EEPROM 0x01
+#define LP8860_PROGRAM_EEPROM 0x02
+#define LP8860_EEPROM_CODE_1 0x08
+#define LP8860_EEPROM_CODE_2 0xba
+#define LP8860_EEPROM_CODE_3 0xef
+
+#define LP8860_CLEAR_FAULTS 0x01
+
+#define LP8860_DISP_LED_NAME "display_cluster"
+
+/**
+ * struct lp8860_led -
+ * @lock - Lock for reading/writing the device
+ * @work - Work item used to off load the brightness register writes
+ * @client - Pointer to the I2C client
+ * @led_dev - led class device pointer
+ * @regmap - Devices register map
+ * @eeprom_regmap - EEPROM register map
+ * @enable_gpio - VDDIO/EN gpio to enable communication interface
+ * @regulator - LED supply regulator pointer
+ * @brightness - Current brightness value requested
+ * @label - LED label
+**/
+struct lp8860_led {
+ struct mutex lock;
+ struct work_struct work;
+ struct i2c_client *client;
+ struct led_classdev led_dev;
+ struct regmap *regmap;
+ struct regmap *eeprom_regmap;
+ struct gpio_desc *enable_gpio;
+ struct regulator *regulator;
+ enum led_brightness brightness;
+ const char *label;
+};
+
+struct lp8860_eeprom_reg {
+ uint8_t reg;
+ uint8_t value;
+};
+
+static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
+ { LP8860_EEPROM_REG_0, 0xed },
+ { LP8860_EEPROM_REG_1, 0xdf },
+ { LP8860_EEPROM_REG_2, 0xdc },
+ { LP8860_EEPROM_REG_3, 0xf0 },
+ { LP8860_EEPROM_REG_4, 0xdf },
+ { LP8860_EEPROM_REG_5, 0xe5 },
+ { LP8860_EEPROM_REG_6, 0xf2 },
+ { LP8860_EEPROM_REG_7, 0x77 },
+ { LP8860_EEPROM_REG_8, 0x77 },
+ { LP8860_EEPROM_REG_9, 0x71 },
+ { LP8860_EEPROM_REG_10, 0x3f },
+ { LP8860_EEPROM_REG_11, 0xb7 },
+ { LP8860_EEPROM_REG_12, 0x17 },
+ { LP8860_EEPROM_REG_13, 0xef },
+ { LP8860_EEPROM_REG_14, 0xb0 },
+ { LP8860_EEPROM_REG_15, 0x87 },
+ { LP8860_EEPROM_REG_16, 0xce },
+ { LP8860_EEPROM_REG_17, 0x72 },
+ { LP8860_EEPROM_REG_18, 0xe5 },
+ { LP8860_EEPROM_REG_19, 0xdf },
+ { LP8860_EEPROM_REG_20, 0x35 },
+ { LP8860_EEPROM_REG_21, 0x06 },
+ { LP8860_EEPROM_REG_22, 0xdc },
+ { LP8860_EEPROM_REG_23, 0x88 },
+ { LP8860_EEPROM_REG_24, 0x3E },
+};
+
+static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
+{
+ int ret;
+
+ mutex_lock(&led->lock);
+
+ if (lock == LP8860_UNLOCK_EEPROM) {
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_EEPROM_CODE_1);
+ if (ret) {
+ dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_EEPROM_CODE_2);
+ if (ret) {
+ dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+ goto out;
+ }
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_EEPROM_CODE_3);
+ if (ret) {
+ dev_err(&led->client->dev, "EEPROM Unlock failed\n");
+ goto out;
+ }
+ } else {
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_UNLOCK,
+ LP8860_LOCK_EEPROM);
+ }
+
+out:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static int lp8860_fault_check(struct lp8860_led *led)
+{
+ int ret, fault;
+ unsigned int read_buf;
+
+ ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
+ if (ret)
+ goto out;
+
+ fault = read_buf;
+
+ ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
+ if (ret)
+ goto out;
+
+ fault |= read_buf;
+
+ /* Attempt to clear any faults */
+ if (fault)
+ ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
+ LP8860_CLEAR_FAULTS);
+out:
+ return ret;
+}
+
+static void lp8860_led_brightness_work(struct work_struct *work)
+{
+ struct lp8860_led *led = container_of(work, struct lp8860_led, work);
+ int ret;
+ int disp_brightness = led->brightness * 255;
+
+ mutex_lock(&led->lock);
+
+ ret = lp8860_fault_check(led);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot read/clear faults\n");
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
+ (disp_brightness & 0xff00) >> 8);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
+ disp_brightness & 0xff);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
+ goto out;
+ }
+out:
+ mutex_unlock(&led->lock);
+}
+
+static void lp8860_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brt_val)
+{
+ struct lp8860_led *led =
+ container_of(led_cdev, struct lp8860_led, led_dev);
+
+ led->brightness = brt_val;
+ schedule_work(&led->work);
+}
+
+static int lp8860_init(struct lp8860_led *led)
+{
+ unsigned int read_buf;
+ int ret, i, reg_count;
+
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 1);
+
+ ret = lp8860_fault_check(led);
+ if (ret)
+ goto out;
+
+ ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
+ if (ret)
+ goto out;
+
+ ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
+ if (ret) {
+ dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
+ goto out;
+ }
+
+ reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
+ for (i = 0; i < reg_count; i++) {
+ ret = regmap_write(led->eeprom_regmap,
+ lp8860_eeprom_disp_regs[i].reg,
+ lp8860_eeprom_disp_regs[i].value);
+ if (ret) {
+ dev_err(&led->client->dev, "Failed writing EEPROM\n");
+ goto out;
+ }
+ }
+
+ ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
+ if (ret)
+ goto out;
+
+ ret = regmap_write(led->regmap,
+ LP8860_EEPROM_CNTRL,
+ LP8860_PROGRAM_EEPROM);
+ if (ret)
+ dev_err(&led->client->dev, "Failed programming EEPROM\n");
+out:
+ if (ret)
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 0);
+ return ret;
+}
+
+static struct reg_default lp8860_reg_defs[] = {
+ { LP8860_DISP_CL1_BRT_MSB, 0x00},
+ { LP8860_DISP_CL1_BRT_LSB, 0x00},
+ { LP8860_DISP_CL1_CURR_MSB, 0x00},
+ { LP8860_DISP_CL1_CURR_LSB, 0x00},
+ { LP8860_CL2_BRT_MSB, 0x00},
+ { LP8860_CL2_BRT_LSB, 0x00},
+ { LP8860_CL2_CURRENT, 0x00},
+ { LP8860_CL3_BRT_MSB, 0x00},
+ { LP8860_CL3_BRT_LSB, 0x00},
+ { LP8860_CL3_CURRENT, 0x00},
+ { LP8860_CL4_BRT_MSB, 0x00},
+ { LP8860_CL4_BRT_LSB, 0x00},
+ { LP8860_CL4_CURRENT, 0x00},
+ { LP8860_CONFIG, 0x00},
+ { LP8860_FAULT_CLEAR, 0x00},
+ { LP8860_EEPROM_CNTRL, 0x80},
+ { LP8860_EEPROM_UNLOCK, 0x00},
+};
+
+static const struct regmap_config lp8860_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = LP8860_EEPROM_UNLOCK,
+ .reg_defaults = lp8860_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
+ .cache_type = REGCACHE_NONE,
+};
+
+static struct reg_default lp8860_eeprom_defs[] = {
+ { LP8860_EEPROM_REG_0, 0x00 },
+ { LP8860_EEPROM_REG_1, 0x00 },
+ { LP8860_EEPROM_REG_2, 0x00 },
+ { LP8860_EEPROM_REG_3, 0x00 },
+ { LP8860_EEPROM_REG_4, 0x00 },
+ { LP8860_EEPROM_REG_5, 0x00 },
+ { LP8860_EEPROM_REG_6, 0x00 },
+ { LP8860_EEPROM_REG_7, 0x00 },
+ { LP8860_EEPROM_REG_8, 0x00 },
+ { LP8860_EEPROM_REG_9, 0x00 },
+ { LP8860_EEPROM_REG_10, 0x00 },
+ { LP8860_EEPROM_REG_11, 0x00 },
+ { LP8860_EEPROM_REG_12, 0x00 },
+ { LP8860_EEPROM_REG_13, 0x00 },
+ { LP8860_EEPROM_REG_14, 0x00 },
+ { LP8860_EEPROM_REG_15, 0x00 },
+ { LP8860_EEPROM_REG_16, 0x00 },
+ { LP8860_EEPROM_REG_17, 0x00 },
+ { LP8860_EEPROM_REG_18, 0x00 },
+ { LP8860_EEPROM_REG_19, 0x00 },
+ { LP8860_EEPROM_REG_20, 0x00 },
+ { LP8860_EEPROM_REG_21, 0x00 },
+ { LP8860_EEPROM_REG_22, 0x00 },
+ { LP8860_EEPROM_REG_23, 0x00 },
+ { LP8860_EEPROM_REG_24, 0x00 },
+};
+
+static const struct regmap_config lp8860_eeprom_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = LP8860_EEPROM_REG_24,
+ .reg_defaults = lp8860_eeprom_defs,
+ .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
+ .cache_type = REGCACHE_NONE,
+};
+
+static int lp8860_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct lp8860_led *led;
+ struct device_node *np = client->dev.of_node;
+
+ led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->label = LP8860_DISP_LED_NAME;
+
+ if (client->dev.of_node) {
+ ret = of_property_read_string(np, "label", &led->label);
+ if (ret) {
+ dev_err(&client->dev, "Missing label in dt\n");
+ return -EINVAL;
+ }
+ }
+
+ led->enable_gpio = devm_gpiod_get(&client->dev, "enable");
+ if (IS_ERR(led->enable_gpio))
+ led->enable_gpio = NULL;
+ else
+ gpiod_direction_output(led->enable_gpio, 0);
+
+ led->regulator = devm_regulator_get(&client->dev, "vled");
+ if (IS_ERR(led->regulator))
+ led->regulator = NULL;
+
+ led->client = client;
+ led->led_dev.name = led->label;
+ led->led_dev.max_brightness = LED_FULL;
+ led->led_dev.brightness_set = lp8860_brightness_set;
+
+ mutex_init(&led->lock);
+ INIT_WORK(&led->work, lp8860_led_brightness_work);
+
+ i2c_set_clientdata(client, led);
+
+ led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
+ if (IS_ERR(led->regmap)) {
+ ret = PTR_ERR(led->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
+ if (IS_ERR(led->eeprom_regmap)) {
+ ret = PTR_ERR(led->eeprom_regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = lp8860_init(led);
+ if (ret)
+ return ret;
+
+ ret = led_classdev_register(&client->dev, &led->led_dev);
+ if (ret) {
+ dev_err(&client->dev, "led register err: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lp8860_remove(struct i2c_client *client)
+{
+ struct lp8860_led *led = i2c_get_clientdata(client);
+ int ret;
+
+ led_classdev_unregister(&led->led_dev);
+ cancel_work_sync(&led->work);
+
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 0);
+
+ if (led->regulator) {
+ ret = regulator_disable(led->regulator);
+ if (ret)
+ dev_err(&led->client->dev,
+ "Failed to disable regulator\n");
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id lp8860_id[] = {
+ { "lp8860", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp8860_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_lp8860_leds_match[] = {
+ { .compatible = "ti,lp8860", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
+#endif
+
+static struct i2c_driver lp8860_driver = {
+ .driver = {
+ .name = "lp8860",
+ .of_match_table = of_match_ptr(of_lp8860_leds_match),
+ },
+ .probe = lp8860_probe,
+ .remove = lp8860_remove,
+ .id_table = lp8860_id,
+};
+module_i2c_driver(lp8860_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP8860 LED drvier");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c
index fa1126f12063..ffc21397a675 100644
--- a/drivers/leds/leds-regulator.c
+++ b/drivers/leds/leds-regulator.c
@@ -153,24 +153,21 @@ static int regulator_led_probe(struct platform_device *pdev)
return -ENODEV;
}
- vcc = regulator_get_exclusive(&pdev->dev, "vled");
+ vcc = devm_regulator_get_exclusive(&pdev->dev, "vled");
if (IS_ERR(vcc)) {
dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name);
return PTR_ERR(vcc);
}
led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
- if (led == NULL) {
- ret = -ENOMEM;
- goto err_vcc;
- }
+ if (led == NULL)
+ return -ENOMEM;
led->cdev.max_brightness = led_regulator_get_max_brightness(vcc);
if (pdata->brightness > led->cdev.max_brightness) {
dev_err(&pdev->dev, "Invalid default brightness %d\n",
pdata->brightness);
- ret = -EINVAL;
- goto err_vcc;
+ return -EINVAL;
}
led->value = pdata->brightness;
@@ -191,7 +188,7 @@ static int regulator_led_probe(struct platform_device *pdev)
ret = led_classdev_register(&pdev->dev, &led->cdev);
if (ret < 0) {
cancel_work_sync(&led->work);
- goto err_vcc;
+ return ret;
}
/* to expose the default value to userspace */
@@ -201,10 +198,6 @@ static int regulator_led_probe(struct platform_device *pdev)
regulator_led_set_value(led);
return 0;
-
-err_vcc:
- regulator_put(vcc);
- return ret;
}
static int regulator_led_remove(struct platform_device *pdev)
@@ -214,7 +207,6 @@ static int regulator_led_remove(struct platform_device *pdev)
led_classdev_unregister(&led->cdev);
cancel_work_sync(&led->work);
regulator_led_disable(led);
- regulator_put(led->vcc);
return 0;
}
diff --git a/drivers/leds/leds-syscon.c b/drivers/leds/leds-syscon.c
index 3afec79c43f4..6896e2d9ba58 100644
--- a/drivers/leds/leds-syscon.c
+++ b/drivers/leds/leds-syscon.c
@@ -18,10 +18,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
- * This driver provides system reboot functionality for APM X-Gene SoC.
- * For system shutdown, this is board specify. If a board designer
- * implements GPIO shutdown, use the gpio-poweroff.c driver.
*/
#include <linux/io.h>
#include <linux/of_device.h>
@@ -70,39 +66,13 @@ static void syscon_led_set(struct led_classdev *led_cdev,
dev_err(sled->cdev.dev, "error updating LED status\n");
}
-static const struct of_device_id syscon_match[] = {
- { .compatible = "syscon", },
- {},
-};
-
-static int __init syscon_leds_init(void)
+static int __init syscon_leds_spawn(struct device_node *np,
+ struct device *dev,
+ struct regmap *map)
{
- const struct of_device_id *devid;
- struct device_node *np;
struct device_node *child;
- struct regmap *map;
- struct platform_device *pdev;
- struct device *dev;
int ret;
- np = of_find_matching_node_and_match(NULL, syscon_match,
- &devid);
- if (!np)
- return -ENODEV;
-
- map = syscon_node_to_regmap(np);
- if (IS_ERR(map))
- return PTR_ERR(map);
-
- /*
- * If the map is there, the device should be there, we allocate
- * memory on the syscon device's behalf here.
- */
- pdev = of_find_device_by_node(np);
- if (!pdev)
- return -ENODEV;
- dev = &pdev->dev;
-
for_each_available_child_of_node(np, child) {
struct syscon_led *sled;
const char *state;
@@ -150,7 +120,6 @@ static int __init syscon_leds_init(void)
if (ret < 0)
return ret;
}
-
}
sled->cdev.brightness_set = syscon_led_set;
@@ -160,7 +129,39 @@ static int __init syscon_leds_init(void)
dev_info(dev, "registered LED %s\n", sled->cdev.name);
}
+ return 0;
+}
+
+static int __init syscon_leds_init(void)
+{
+ struct device_node *np;
+
+ for_each_of_allnodes(np) {
+ struct platform_device *pdev;
+ struct regmap *map;
+ int ret;
+
+ if (!of_device_is_compatible(np, "syscon"))
+ continue;
+
+ map = syscon_node_to_regmap(np);
+ if (IS_ERR(map)) {
+ pr_err("error getting regmap for syscon LEDs\n");
+ continue;
+ }
+
+ /*
+ * If the map is there, the device should be there, we allocate
+ * memory on the syscon device's behalf here.
+ */
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ return -ENODEV;
+ ret = syscon_leds_spawn(np, &pdev->dev, map);
+ if (ret)
+ dev_err(&pdev->dev, "could not spawn syscon LEDs\n");
+ }
- return 0;
+ return 0;
}
device_initcall(syscon_leds_init);
diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
index 4c50365344a9..2348dbda5269 100644
--- a/drivers/leds/leds.h
+++ b/drivers/leds/leds.h
@@ -17,16 +17,28 @@
#include <linux/rwsem.h>
#include <linux/leds.h>
-static inline void __led_set_brightness(struct led_classdev *led_cdev,
+static inline void led_set_brightness_async(struct led_classdev *led_cdev,
enum led_brightness value)
{
- if (value > led_cdev->max_brightness)
- value = led_cdev->max_brightness;
- led_cdev->brightness = value;
+ led_cdev->brightness = min(value, led_cdev->max_brightness);
+
if (!(led_cdev->flags & LED_SUSPENDED))
led_cdev->brightness_set(led_cdev, value);
}
+static inline int led_set_brightness_sync(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ int ret = 0;
+
+ led_cdev->brightness = min(value, led_cdev->max_brightness);
+
+ if (!(led_cdev->flags & LED_SUSPENDED))
+ ret = led_cdev->brightness_set_sync(led_cdev,
+ led_cdev->brightness);
+ return ret;
+}
+
static inline int led_get_brightness(struct led_classdev *led_cdev)
{
return led_cdev->brightness;
diff --git a/drivers/leds/trigger/ledtrig-backlight.c b/drivers/leds/trigger/ledtrig-backlight.c
index 47e55aa9eefa..59eca17d9661 100644
--- a/drivers/leds/trigger/ledtrig-backlight.c
+++ b/drivers/leds/trigger/ledtrig-backlight.c
@@ -51,9 +51,9 @@ static int fb_notifier_callback(struct notifier_block *p,
if ((n->old_status == UNBLANK) ^ n->invert) {
n->brightness = led->brightness;
- __led_set_brightness(led, LED_OFF);
+ led_set_brightness_async(led, LED_OFF);
} else {
- __led_set_brightness(led, n->brightness);
+ led_set_brightness_async(led, n->brightness);
}
n->old_status = new_status;
@@ -89,9 +89,9 @@ static ssize_t bl_trig_invert_store(struct device *dev,
/* After inverting, we need to update the LED. */
if ((n->old_status == BLANK) ^ n->invert)
- __led_set_brightness(led, LED_OFF);
+ led_set_brightness_async(led, LED_OFF);
else
- __led_set_brightness(led, n->brightness);
+ led_set_brightness_async(led, n->brightness);
return num;
}
diff --git a/drivers/leds/trigger/ledtrig-default-on.c b/drivers/leds/trigger/ledtrig-default-on.c
index 81a91be8e18d..6f38f883aaf1 100644
--- a/drivers/leds/trigger/ledtrig-default-on.c
+++ b/drivers/leds/trigger/ledtrig-default-on.c
@@ -19,7 +19,7 @@
static void defon_trig_activate(struct led_classdev *led_cdev)
{
- __led_set_brightness(led_cdev, led_cdev->max_brightness);
+ led_set_brightness_async(led_cdev, led_cdev->max_brightness);
}
static struct led_trigger defon_led_trigger = {
diff --git a/drivers/leds/trigger/ledtrig-gpio.c b/drivers/leds/trigger/ledtrig-gpio.c
index c86c41826476..4cc7040746c6 100644
--- a/drivers/leds/trigger/ledtrig-gpio.c
+++ b/drivers/leds/trigger/ledtrig-gpio.c
@@ -54,12 +54,12 @@ static void gpio_trig_work(struct work_struct *work)
if (tmp) {
if (gpio_data->desired_brightness)
- __led_set_brightness(gpio_data->led,
+ led_set_brightness_async(gpio_data->led,
gpio_data->desired_brightness);
else
- __led_set_brightness(gpio_data->led, LED_FULL);
+ led_set_brightness_async(gpio_data->led, LED_FULL);
} else {
- __led_set_brightness(gpio_data->led, LED_OFF);
+ led_set_brightness_async(gpio_data->led, LED_OFF);
}
}
diff --git a/drivers/leds/trigger/ledtrig-heartbeat.c b/drivers/leds/trigger/ledtrig-heartbeat.c
index 5c8464a33172..fea6871d2609 100644
--- a/drivers/leds/trigger/ledtrig-heartbeat.c
+++ b/drivers/leds/trigger/ledtrig-heartbeat.c
@@ -74,7 +74,7 @@ static void led_heartbeat_function(unsigned long data)
break;
}
- __led_set_brightness(led_cdev, brightness);
+ led_set_brightness_async(led_cdev, brightness);
mod_timer(&heartbeat_data->timer, jiffies + delay);
}
diff --git a/drivers/leds/trigger/ledtrig-oneshot.c b/drivers/leds/trigger/ledtrig-oneshot.c
index cb4c7466692a..fbd02cdc3ad7 100644
--- a/drivers/leds/trigger/ledtrig-oneshot.c
+++ b/drivers/leds/trigger/ledtrig-oneshot.c
@@ -63,9 +63,9 @@ static ssize_t led_invert_store(struct device *dev,
oneshot_data->invert = !!state;
if (oneshot_data->invert)
- __led_set_brightness(led_cdev, LED_FULL);
+ led_set_brightness_async(led_cdev, LED_FULL);
else
- __led_set_brightness(led_cdev, LED_OFF);
+ led_set_brightness_async(led_cdev, LED_OFF);
return size;
}
diff --git a/drivers/leds/trigger/ledtrig-transient.c b/drivers/leds/trigger/ledtrig-transient.c
index e5abc00bb00c..3c34de404d18 100644
--- a/drivers/leds/trigger/ledtrig-transient.c
+++ b/drivers/leds/trigger/ledtrig-transient.c
@@ -41,7 +41,7 @@ static void transient_timer_function(unsigned long data)
struct transient_trig_data *transient_data = led_cdev->trigger_data;
transient_data->activate = 0;
- __led_set_brightness(led_cdev, transient_data->restore_state);
+ led_set_brightness_async(led_cdev, transient_data->restore_state);
}
static ssize_t transient_activate_show(struct device *dev,
@@ -72,7 +72,8 @@ static ssize_t transient_activate_store(struct device *dev,
if (state == 0 && transient_data->activate == 1) {
del_timer(&transient_data->timer);
transient_data->activate = state;
- __led_set_brightness(led_cdev, transient_data->restore_state);
+ led_set_brightness_async(led_cdev,
+ transient_data->restore_state);
return size;
}
@@ -80,7 +81,7 @@ static ssize_t transient_activate_store(struct device *dev,
if (state == 1 && transient_data->activate == 0 &&
transient_data->duration != 0) {
transient_data->activate = state;
- __led_set_brightness(led_cdev, transient_data->state);
+ led_set_brightness_async(led_cdev, transient_data->state);
transient_data->restore_state =
(transient_data->state == LED_FULL) ? LED_OFF : LED_FULL;
mod_timer(&transient_data->timer,
@@ -203,7 +204,8 @@ static void transient_trig_deactivate(struct led_classdev *led_cdev)
if (led_cdev->activated) {
del_timer_sync(&transient_data->timer);
- __led_set_brightness(led_cdev, transient_data->restore_state);
+ led_set_brightness_async(led_cdev,
+ transient_data->restore_state);
device_remove_file(led_cdev->dev, &dev_attr_activate);
device_remove_file(led_cdev->dev, &dev_attr_duration);
device_remove_file(led_cdev->dev, &dev_attr_state);
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 361101fef270..cfceef32c9b3 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -13,6 +13,7 @@
#define __LINUX_LEDS_H_INCLUDED
#include <linux/list.h>
+#include <linux/mutex.h>
#include <linux/rwsem.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
@@ -42,11 +43,20 @@ struct led_classdev {
#define LED_BLINK_ONESHOT (1 << 17)
#define LED_BLINK_ONESHOT_STOP (1 << 18)
#define LED_BLINK_INVERT (1 << 19)
+#define LED_SYSFS_DISABLE (1 << 20)
+#define SET_BRIGHTNESS_ASYNC (1 << 21)
+#define SET_BRIGHTNESS_SYNC (1 << 22)
/* Set LED brightness level */
/* Must not sleep, use a workqueue if needed */
void (*brightness_set)(struct led_classdev *led_cdev,
enum led_brightness brightness);
+ /*
+ * Set LED brightness level immediately - it can block the caller for
+ * the time required for accessing a LED device register.
+ */
+ int (*brightness_set_sync)(struct led_classdev *led_cdev,
+ enum led_brightness brightness);
/* Get LED brightness level */
enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
@@ -85,6 +95,9 @@ struct led_classdev {
/* true if activated - deactivate routine uses it to do cleanup */
bool activated;
#endif
+
+ /* Ensures consistent access to the LED Flash Class device */
+ struct mutex led_access;
};
extern int led_classdev_register(struct device *parent,
@@ -151,6 +164,33 @@ extern void led_set_brightness(struct led_classdev *led_cdev,
*/
extern int led_update_brightness(struct led_classdev *led_cdev);
+/**
+ * led_sysfs_disable - disable LED sysfs interface
+ * @led_cdev: the LED to set
+ *
+ * Disable the led_cdev's sysfs interface.
+ */
+extern void led_sysfs_disable(struct led_classdev *led_cdev);
+
+/**
+ * led_sysfs_enable - enable LED sysfs interface
+ * @led_cdev: the LED to set
+ *
+ * Enable the led_cdev's sysfs interface.
+ */
+extern void led_sysfs_enable(struct led_classdev *led_cdev);
+
+/**
+ * led_sysfs_is_disabled - check if LED sysfs interface is disabled
+ * @led_cdev: the LED to query
+ *
+ * Returns: true if the led_cdev's sysfs interface is disabled.
+ */
+static inline bool led_sysfs_is_disabled(struct led_classdev *led_cdev)
+{
+ return led_cdev->flags & LED_SYSFS_DISABLE;
+}
+
/*
* LED Triggers
*/
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 20:58:13 +0000