diff options
333 files changed, 4674 insertions, 13057 deletions
diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml new file mode 100644 index 000000000000..d317897e1115 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Loongson RS780E PCH ACPI Controller + +maintainers: + - Jiaxun Yang <jiaxun.yang@flygoat.com> + +description: | + This controller can be found in Loongson-3 systems with RS780E PCH. + +properties: + compatible: + const: loongson,rs780e-acpi + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + isa@0 { + compatible = "isa"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0 0 0x1000>; + + acpi@800 { + compatible = "loongson,rs780e-acpi"; + reg = <1 0x800 0x100>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml new file mode 100644 index 000000000000..30e7cf1aeb87 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/loongson.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/loongson.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson PCI Host Controller + +maintainers: + - Jiaxun Yang <jiaxun.yang@flygoat.com> + +description: |+ + PCI host controller found on Loongson PCHs and SoCs. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + oneOf: + - const: loongson,ls2k-pci + - const: loongson,ls7a-pci + - const: loongson,rs780e-pci + + reg: + minItems: 1 + maxItems: 2 + items: + - description: CFG0 standard config space register + - description: CFG1 extended config space register + + ranges: + minItems: 1 + maxItems: 3 + + +required: + - compatible + - reg + - ranges + +examples: + - | + + bus { + #address-cells = <2>; + #size-cells = <2>; + pcie@1a000000 { + compatible = "loongson,rs780e-pci"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + // CPU_PHYSICAL(2) SIZE(2) + reg = <0x0 0x1a000000 0x0 0x2000000>; + + // BUS_ADDRESS(3) CPU_PHYSICAL(2) SIZE(2) + ranges = <0x01000000 0x0 0x00004000 0x0 0x00004000 0x0 0x00004000>, + <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>; + }; + }; +... diff --git a/arch/mips/Kbuild b/arch/mips/Kbuild index a8d5e4fcbe53..d5d6ef9bb986 100644 --- a/arch/mips/Kbuild +++ b/arch/mips/Kbuild @@ -12,7 +12,7 @@ obj-y := $(platform-y) # make clean traverses $(obj-) without having included .config, so # everything ends up here -obj- := $(platform-) +obj- := $(platform-y) # mips object files # The object files are linked as core-y files would be linked diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index a69b272a3ab0..c7368a81fd1e 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -1,42 +1,44 @@ # SPDX-License-Identifier: GPL-2.0 # All platforms listed in alphabetic order -platforms += alchemy -platforms += ar7 -platforms += ath25 -platforms += ath79 -platforms += bcm47xx -platforms += bcm63xx -platforms += bmips -platforms += cavium-octeon -platforms += cobalt -platforms += dec -platforms += emma -platforms += generic -platforms += jazz -platforms += jz4740 -platforms += lantiq -platforms += lasat -platforms += loongson2ef -platforms += loongson32 -platforms += loongson64 -platforms += mti-malta -platforms += netlogic -platforms += paravirt -platforms += pic32 -platforms += pistachio -platforms += pmcs-msp71xx -platforms += pnx833x -platforms += ralink -platforms += rb532 -platforms += sgi-ip22 -platforms += sgi-ip27 -platforms += sgi-ip30 -platforms += sgi-ip32 -platforms += sibyte -platforms += sni -platforms += txx9 -platforms += vr41xx +platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/ +platform-$(CONFIG_AR7) += ar7/ +platform-$(CONFIG_ATH25) += ath25/ +platform-$(CONFIG_ATH79) += ath79/ +platform-$(CONFIG_BCM47XX) += bcm47xx/ +platform-$(CONFIG_BCM63XX) += bcm63xx/ +platform-$(CONFIG_BMIPS_GENERIC) += bmips/ +platform-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon/ +platform-$(CONFIG_MIPS_COBALT) += cobalt/ +platform-$(CONFIG_MACH_DECSTATION) += dec/ +platform-$(CONFIG_MIPS_GENERIC) += generic/ +platform-$(CONFIG_MACH_JAZZ) += jazz/ +platform-$(CONFIG_MACH_INGENIC) += jz4740/ +platform-$(CONFIG_LANTIQ) += lantiq/ +platform-$(CONFIG_MACH_LOONGSON2EF) += loongson2ef/ +platform-$(CONFIG_MACH_LOONGSON32) += loongson32/ +platform-$(CONFIG_MACH_LOONGSON64) += loongson64/ +platform-$(CONFIG_MIPS_MALTA) += mti-malta/ +platform-$(CONFIG_NLM_COMMON) += netlogic/ +platform-$(CONFIG_MIPS_PARAVIRT) += paravirt/ +platform-$(CONFIG_PIC32MZDA) += pic32/ +platform-$(CONFIG_MACH_PISTACHIO) += pistachio/ +platform-$(CONFIG_SOC_PNX833X) += pnx833x/ +platform-$(CONFIG_RALINK) += ralink/ +platform-$(CONFIG_MIKROTIK_RB532) += rb532/ +platform-$(CONFIG_SGI_IP22) += sgi-ip22/ +platform-$(CONFIG_SGI_IP27) += sgi-ip27/ +platform-$(CONFIG_SGI_IP28) += sgi-ip22/ +platform-$(CONFIG_SGI_IP30) += sgi-ip30/ +platform-$(CONFIG_SGI_IP32) += sgi-ip32/ +platform-$(CONFIG_SIBYTE_BCM112X) += sibyte/ +platform-$(CONFIG_SIBYTE_SB1250) += sibyte/ +platform-$(CONFIG_SIBYTE_BCM1x55) += sibyte/ +platform-$(CONFIG_SIBYTE_BCM1x80) += sibyte/ +platform-$(CONFIG_SNI_RM) += sni/ +platform-$(CONFIG_MACH_TX39XX) += txx9/ +platform-$(CONFIG_MACH_TX49XX) += txx9/ +platform-$(CONFIG_MACH_VR41XX) += vr41xx/ # include the platform specific files -include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms)) +include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platform-y)) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 690718b3701a..b6338e806a4b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -92,6 +92,9 @@ config MIPS select SYSCTL_EXCEPTION_TRACE select VIRT_TO_BUS +config MIPS_FIXUP_BIGPHYS_ADDR + bool + menu "Machine selection" choice @@ -157,6 +160,7 @@ config MIPS_ALCHEMY select CSRC_R4K select IRQ_MIPS_CPU select DMA_MAYBE_COHERENT # Au1000,1500,1100 aren't, rest is + select MIPS_FIXUP_BIGPHYS_ADDR if PCI select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION @@ -427,23 +431,6 @@ config LANTIQ select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER -config LASAT - bool "LASAT Networks platforms" - select CEVT_R4K - select CRC32 - select CSRC_R4K - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select HAVE_PCI - select IRQ_MIPS_CPU - select PCI_GT64XXX_PCI0 - select MIPS_NILE4 - select R5000_CPU_SCACHE - select SYS_HAS_CPU_R5000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if BROKEN - select SYS_SUPPORTS_LITTLE_ENDIAN - config MACH_LOONGSON32 bool "Loongson 32-bit family of machines" select SYS_SUPPORTS_ZBOOT @@ -475,8 +462,10 @@ config MACH_LOONGSON64 select ISA select I8259 select IRQ_MIPS_CPU - select NR_CPUS_DEFAULT_4 + select NO_EXCEPT_FILL + select NR_CPUS_DEFAULT_64 select USE_GENERIC_EARLY_PRINTK_8250 + select PCI_DRIVERS_GENERIC select SYS_HAS_CPU_LOONGSON64 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_SMP @@ -593,13 +582,6 @@ config MACH_PIC32 Microchip PIC32 is a family of general-purpose 32 bit MIPS core microcontrollers. -config NEC_MARKEINS - bool "NEC EMMA2RH Mark-eins board" - select SOC_EMMA2RH - select HAVE_PCI - help - This enables support for the NEC Electronics Mark-eins boards. - config MACH_VR41XX bool "NEC VR4100 series based machines" select CEVT_R4K @@ -621,30 +603,6 @@ config NXP_STB225 help Support for NXP Semiconductors STB225 Development Board. -config PMC_MSP - bool "PMC-Sierra MSP chipsets" - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select SWAP_IO_SPACE - select NO_EXCEPT_FILL - select BOOT_RAW - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_MIPS16 - select IRQ_MIPS_CPU - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select USB_EHCI_BIG_ENDIAN_MMIO - select USB_EHCI_BIG_ENDIAN_DESC - help - This adds support for the PMC-Sierra family of Multi-Service - Processor System-On-A-Chips. These parts include a number - of integrated peripherals, interfaces and DSPs in addition to - a variety of MIPS cores. - config RALINK bool "Ralink based machines" select CEVT_R4K @@ -1087,10 +1045,8 @@ source "arch/mips/generic/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/jz4740/Kconfig" source "arch/mips/lantiq/Kconfig" -source "arch/mips/lasat/Kconfig" source "arch/mips/pic32/Kconfig" source "arch/mips/pistachio/Kconfig" -source "arch/mips/pmcs-msp71xx/Kconfig" source "arch/mips/ralink/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" @@ -1154,6 +1110,7 @@ config CSRC_IOASIC bool config CSRC_R4K + select CLOCKSOURCE_WATCHDOG if CPU_FREQ bool config CSRC_SB1250 @@ -1211,9 +1168,6 @@ config MIPS_BONITO64 config MIPS_MSC bool -config MIPS_NILE4 - bool - config SYNC_R4K bool @@ -1334,18 +1288,6 @@ config PCI_XTALK_BRIDGE config NO_EXCEPT_FILL bool -config SOC_EMMA2RH - bool - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_MIPS_CPU - select SWAP_IO_SPACE - select SYS_HAS_CPU_R5500 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - config SOC_PNX833X bool select CEVT_R4K @@ -1419,9 +1361,6 @@ config MIPS_L1_CACHE_SHIFT default "4" if MIPS_L1_CACHE_SHIFT_4 default "5" -config HAVE_STD_PC_SERIAL_PORT - bool - config ARC_CMDLINE_ONLY bool @@ -1504,6 +1443,18 @@ config CPU_LOONGSON3_WORKAROUNDS If unsure, please say Y. +config CPU_LOONGSON3_CPUCFG_EMULATION + bool "Emulate the CPUCFG instruction on older Loongson cores" + default y + depends on CPU_LOONGSON64 + help + Loongson-3A R4 and newer have the CPUCFG instruction available for + userland to query CPU capabilities, much like CPUID on x86. This + option provides emulation of the instruction on older Loongson + cores, back to Loongson-3A1000. + + If unsure, please say Y. + config CPU_LOONGSON2E bool "Loongson 2E" depends on SYS_HAS_CPU_LOONGSON2E @@ -1580,6 +1531,21 @@ config CPU_MIPS32_R2 specific type of processor in your system, choose those that one otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. +config CPU_MIPS32_R5 + bool "MIPS32 Release 5" + depends on SYS_HAS_CPU_MIPS32_R5 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select HAVE_KVM + select MIPS_O32_FP64_SUPPORT + help + Choose this option to build a kernel for release 5 or later of the + MIPS32 architecture. New MIPS processors, starting with the Warrior + family, are based on a MIPS32r5 processor. If you own an older + processor, you probably need to select MIPS32r1 or MIPS32r2 instead. + config CPU_MIPS32_R6 bool "MIPS32 Release 6" depends on SYS_HAS_CPU_MIPS32_R6 @@ -1632,6 +1598,23 @@ config CPU_MIPS64_R2 specific type of processor in your system, choose those that one otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. +config CPU_MIPS64_R5 + bool "MIPS64 Release 5" + depends on SYS_HAS_CPU_MIPS64_R5 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select CPU_SUPPORTS_MSA + select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32 + select HAVE_KVM + help + Choose this option to build a kernel for release 5 or later of the + MIPS64 architecture. This is a intermediate MIPS architecture + release partly implementing release 6 features. Though there is no + any hardware known to be based on this release. + config CPU_MIPS64_R6 bool "MIPS64 Release 6" depends on SYS_HAS_CPU_MIPS64_R6 @@ -1650,6 +1633,28 @@ config CPU_MIPS64_R6 family, are based on a MIPS64r6 processor. If you own an older processor, you probably need to select MIPS64r1 or MIPS64r2 instead. +config CPU_P5600 + bool "MIPS Warrior P5600" + depends on SYS_HAS_CPU_P5600 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select CPU_SUPPORTS_UNCACHED_ACCELERATED + select CPU_SUPPORTS_CPUFREQ + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select HAVE_KVM + select MIPS_O32_FP64_SUPPORT + help + Choose this option to build a kernel for MIPS Warrior P5600 CPU. + It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes, + MMU with two-levels TLB, UCA, MSA, MDU core level features and system + level features like up to six P5600 calculation cores, CM2 with L2 + cache, IOCU/IOMMU (though might be unused depending on the system- + specific IP core configuration), GIC, CPC, virtualisation module, + eJTAG and PDtrace. + config CPU_R3000 bool "R3000" depends on SYS_HAS_CPU_R3000 @@ -1826,7 +1831,8 @@ endchoice config CPU_MIPS32_3_5_FEATURES bool "MIPS32 Release 3.5 Features" depends on SYS_HAS_CPU_MIPS32_R3_5 - depends on CPU_MIPS32_R2 || CPU_MIPS32_R6 + depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \ + CPU_P5600 help Choose this option to build a kernel for release 2 or later of the MIPS32 architecture including features from the 3.5 release such as @@ -1846,7 +1852,7 @@ config CPU_MIPS32_3_5_EVA config CPU_MIPS32_R5_FEATURES bool "MIPS32 Release 5 Features" depends on SYS_HAS_CPU_MIPS32_R5 - depends on CPU_MIPS32_R2 + depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600 help Choose this option to build a kernel for release 2 or later of the MIPS32 architecture including features from release 5 such as @@ -2001,6 +2007,10 @@ config SYS_HAS_CPU_MIPS64_R6 bool select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT +config SYS_HAS_CPU_P5600 + bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT + config SYS_HAS_CPU_R3000 bool @@ -2084,11 +2094,13 @@ endmenu # config CPU_MIPS32 bool - default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6 + default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \ + CPU_MIPS32_R6 || CPU_P5600 config CPU_MIPS64 bool - default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6 + default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \ + CPU_MIPS64_R6 # # These indicate the revision of the architecture @@ -2104,6 +2116,13 @@ config CPU_MIPSR2 select CPU_HAS_DIEI if !CPU_DIEI_BROKEN select MIPS_SPRAM +config CPU_MIPSR5 + bool + default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 || CPU_P5600 + select CPU_HAS_RIXI + select CPU_HAS_DIEI if !CPU_DIEI_BROKEN + select MIPS_SPRAM + config CPU_MIPSR6 bool default y if CPU_MIPS32_R6 || CPU_MIPS64_R6 @@ -2118,6 +2137,7 @@ config TARGET_ISA_REV int default 1 if CPU_MIPSR1 default 2 if CPU_MIPSR2 + default 5 if CPU_MIPSR5 default 6 if CPU_MIPSR6 default 0 help @@ -2707,7 +2727,11 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK config RELOCATABLE bool "Relocatable kernel" - depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC) + depends on SYS_SUPPORTS_RELOCATABLE + depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \ + CPU_MIPS32_R5 || CPU_MIPS64_R5 || \ + CPU_MIPS32_R6 || CPU_MIPS64_R6 || \ + CPU_P5600 || CAVIUM_OCTEON_SOC help This builds a kernel image that retains relocation information so it can be loaded someplace besides the default 1MB. @@ -3275,3 +3299,5 @@ endmenu source "drivers/firmware/Kconfig" source "arch/mips/kvm/Kconfig" + +source "arch/mips/vdso/Kconfig" diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 93a2974d2ab7..7a8d94cdd493 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -148,4 +148,14 @@ config MIPS_CPS_NS16550_SHIFT form their addresses. That is, log base 2 of the span between adjacent ns16550 registers in the system. +config MIPS_CPS_NS16550_WIDTH + int "UART Register Width" + default 1 + help + ns16550 registers width. UART registers IO access methods will be + selected in accordance with this parameter. By setting it to 1, 2 or + 4 UART registers will be accessed by means of lb/sb, lh/sh or lw/sw + instructions respectively. Any value not from that set activates + lb/sb instructions. + endif # MIPS_CPS_NS16550_BOOL diff --git a/arch/mips/Makefile b/arch/mips/Makefile index e1c44aed8156..0d0f29d662c9 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -116,33 +116,8 @@ endif cflags-y += -ffreestanding -# -# We explicitly add the endianness specifier if needed, this allows -# to compile kernels with a toolchain for the other endianness. We -# carefully avoid to add it redundantly because gcc 3.3/3.4 complains -# when fed the toolchain default! -# -# Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of -# 2006-10-10 don't properly change the predefined symbols if -EB / -EL -# are used, so we kludge that here. A bug has been filed at -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. -# -# clang doesn't suffer from these issues and our checks against -dumpmachine -# don't work so well when cross compiling, since without providing --target -# clang's output will be based upon the build machine. So for clang we simply -# unconditionally specify -EB or -EL as appropriate. -# -ifdef CONFIG_CC_IS_CLANG cflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -EL -else -undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__ -undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__ -predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__ -predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__ -cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be)) -cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le)) -endif cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ -fno-omit-frame-pointer @@ -171,10 +146,13 @@ cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R5) += -march=mips32r5 -Wa,--trap -modd-spreg cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R5) += -march=mips64r5 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap +cflags-$(CONFIG_CPU_P5600) += -march=p5600 -Wa,--trap -modd-spreg cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \ -Wa,--trap @@ -288,12 +266,23 @@ ifdef CONFIG_64BIT endif endif +# When linking a 32-bit executable the LLVM linker cannot cope with a +# 32-bit load address that has been sign-extended to 64 bits. Simply +# remove the upper 32 bits then, as it is safe to do so with other +# linkers. +ifdef CONFIG_64BIT + load-ld = $(load-y) +else + load-ld = $(subst 0xffffffff,0x,$(load-y)) +endif + KBUILD_AFLAGS += $(cflags-y) KBUILD_CFLAGS += $(cflags-y) -KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) +KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) -DLINKER_LOAD_ADDRESS=$(load-ld) KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0) bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \ + LINKER_LOAD_ADDRESS=$(load-ld) \ VMLINUX_ENTRY_ADDRESS=$(entry-y) \ PLATFORM="$(platform-y)" \ ITS_INPUTS="$(its-y)" @@ -359,12 +348,6 @@ ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0) bootz-y += uzImage.bin endif -ifdef CONFIG_LASAT -rom.bin rom.sw: vmlinux - $(Q)$(MAKE) $(build)=arch/mips/lasat/image \ - $(bootvars-y) $@ -endif - # # Some machines like the Indy need 32-bit ELF binaries for booting purposes. # Other need ECOFF, so we build a 32-bit ELF binary for them which we then @@ -430,7 +413,6 @@ archclean: $(Q)$(MAKE) $(clean)=arch/mips/boot $(Q)$(MAKE) $(clean)=arch/mips/boot/compressed $(Q)$(MAKE) $(clean)=arch/mips/boot/tools - $(Q)$(MAKE) $(clean)=arch/mips/lasat archheaders: $(Q)$(MAKE) $(build)=arch/mips/kernel/syscalls all diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform index 33c9da3b077b..c8cff50b0eda 100644 --- a/arch/mips/alchemy/Platform +++ b/arch/mips/alchemy/Platform @@ -15,19 +15,16 @@ load-$(CONFIG_MIPS_DB1XXX) += 0xffffffff80100000 # # 4G-Systems MTX-1 "MeshCube" wireless router # -platform-$(CONFIG_MIPS_MTX1) += alchemy/ load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000 # # MyCable eval board # -platform-$(CONFIG_MIPS_XXS1500) += alchemy/ load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 # # Trapeze ITS GRP board # -platform-$(CONFIG_MIPS_GPR) += alchemy/ load-$(CONFIG_MIPS_GPR) += 0xffffffff80100000 # boards can specify their own <gpio.h> in one of their include dirs. diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 7faaa6d593a7..0f60efe0481e 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/ioport.h> +#include <linux/mm.h> #include <asm/dma-coherence.h> #include <asm/mipsregs.h> @@ -72,9 +73,9 @@ void __init plat_mem_setup(void) iomem_resource.end = IOMEM_RESOURCE_END; } -#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI) +#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR /* This routine should be valid for all Au1x based boards */ -phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) +phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) { unsigned long start = ALCHEMY_PCI_MEMWIN_START; unsigned long end = ALCHEMY_PCI_MEMWIN_END; @@ -90,5 +91,13 @@ phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) /* default nop */ return phys_addr; } -EXPORT_SYMBOL(__fixup_bigphys_addr); -#endif + +int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr, + unsigned long pfn, unsigned long size, pgprot_t prot) +{ + phys_addr_t phys_addr = fixup_bigphys_addr(pfn << PAGE_SHIFT, size); + + return remap_pfn_range(vma, vaddr, phys_addr >> PAGE_SHIFT, size, prot); +} +EXPORT_SYMBOL(io_remap_pfn_range); +#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */ diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c index 3e0c75c0ece0..752b93d91ac9 100644 --- a/arch/mips/alchemy/devboards/db1550.c +++ b/arch/mips/alchemy/devboards/db1550.c @@ -225,7 +225,7 @@ static void __init pb1550_nand_setup(void) case 0: case 2: case 8: case 0xC: case 0xD: /* x16 NAND Flash */ pb1550_nand_pd.devwidth = 1; - /* fallthrough */ + fallthrough; case 1: case 3: case 9: case 0xE: case 0xF: /* x8 NAND, already set up */ platform_device_register(&pb1550_nand_dev); diff --git a/arch/mips/ar7/Platform b/arch/mips/ar7/Platform index 21f9102d533c..a9257cc01c3c 100644 --- a/arch/mips/ar7/Platform +++ b/arch/mips/ar7/Platform @@ -1,6 +1,5 @@ # # Texas Instruments AR7 # -platform-$(CONFIG_AR7) += ar7/ cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7 load-$(CONFIG_AR7) += 0xffffffff94100000 diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c index b3ffe7c898eb..352d5dbc777c 100644 --- a/arch/mips/ar7/setup.c +++ b/arch/mips/ar7/setup.c @@ -57,7 +57,7 @@ const char *get_system_type(void) case TITAN_CHIP_1060: return "TI AR7 (TNETV1060)"; } - /* fall through */ + fallthrough; default: return "TI AR7 (unknown)"; } diff --git a/arch/mips/ath25/Platform b/arch/mips/ath25/Platform index ef3f81fa080b..aef098b6f405 100644 --- a/arch/mips/ath25/Platform +++ b/arch/mips/ath25/Platform @@ -1,6 +1,5 @@ # # Atheros AR531X/AR231X WiSoC # -platform-$(CONFIG_ATH25) += ath25/ cflags-$(CONFIG_ATH25) += -I$(srctree)/arch/mips/include/asm/mach-ath25 load-$(CONFIG_ATH25) += 0xffffffff80041000 diff --git a/arch/mips/ath79/Platform b/arch/mips/ath79/Platform index 2bd663647d27..57744472ed2e 100644 --- a/arch/mips/ath79/Platform +++ b/arch/mips/ath79/Platform @@ -2,6 +2,5 @@ # Atheros AR71xx/AR724x/AR913x # -platform-$(CONFIG_ATH79) += ath79/ cflags-$(CONFIG_ATH79) += -I$(srctree)/arch/mips/include/asm/mach-ath79 load-$(CONFIG_ATH79) = 0xffffffff80060000 diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index acb4fd647a30..4b7c066ac88e 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -153,8 +153,7 @@ static void __init ath79_detect_sys_type(void) case REV_ID_MAJOR_QCA9533_V2: ver = 2; ath79_soc_rev = 2; - /* fall through */ - + fallthrough; case REV_ID_MAJOR_QCA9533: ath79_soc = ATH79_SOC_QCA9533; chip = "9533"; diff --git a/arch/mips/bcm47xx/Platform b/arch/mips/bcm47xx/Platform index 70783b75fd9d..833b204fe5da 100644 --- a/arch/mips/bcm47xx/Platform +++ b/arch/mips/bcm47xx/Platform @@ -1,7 +1,6 @@ # # Broadcom BCM47XX boards # -platform-$(CONFIG_BCM47XX) += bcm47xx/ cflags-$(CONFIG_BCM47XX) += \ -I$(srctree)/arch/mips/include/asm/mach-bcm47xx load-$(CONFIG_BCM47XX) := 0xffffffff80001000 diff --git a/arch/mips/bcm63xx/Platform b/arch/mips/bcm63xx/Platform index 5f86b2fff6de..882dc40f49a2 100644 --- a/arch/mips/bcm63xx/Platform +++ b/arch/mips/bcm63xx/Platform @@ -1,7 +1,6 @@ # # Broadcom BCM63XX boards # -platform-$(CONFIG_BCM63XX) += bcm63xx/ cflags-$(CONFIG_BCM63XX) += \ -I$(srctree)/arch/mips/include/asm/mach-bcm63xx/ load-$(CONFIG_BCM63XX) := 0xffffffff80010000 diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c index f61c16f57a97..8e3e199dd35d 100644 --- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -304,7 +304,7 @@ void __init bcm63xx_cpu_init(void) case CPU_BMIPS3300: if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT) __cpu_name[cpu] = "Broadcom BCM6338"; - /* fall-through */ + fallthrough; case CPU_BMIPS32: chipid_reg = BCM_6345_PERF_BASE; break; diff --git a/arch/mips/bcm63xx/dev-flash.c b/arch/mips/bcm63xx/dev-flash.c index a1093934c616..f9cc015d3dc9 100644 --- a/arch/mips/bcm63xx/dev-flash.c +++ b/arch/mips/bcm63xx/dev-flash.c @@ -94,7 +94,7 @@ static int __init bcm63xx_detect_flash_type(void) case STRAPBUS_6368_BOOT_SEL_PARALLEL: return BCM63XX_FLASH_TYPE_PARALLEL; } - /* fall through */ + fallthrough; default: return -EINVAL; } diff --git a/arch/mips/bmips/Platform b/arch/mips/bmips/Platform index 5f127fd7f4b5..1434ea31ce85 100644 --- a/arch/mips/bmips/Platform +++ b/arch/mips/bmips/Platform @@ -1,7 +1,6 @@ # # Broadcom Generic BMIPS kernel # -platform-$(CONFIG_BMIPS_GENERIC) += bmips/ cflags-$(CONFIG_BMIPS_GENERIC) += \ -I$(srctree)/arch/mips/include/asm/mach-bmips/ load-$(CONFIG_BMIPS_GENERIC) := 0xffffffff80010000 diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index 0df0ee8a298d..6e56caef69f0 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -90,7 +90,7 @@ ifneq ($(zload-y),) VMLINUZ_LOAD_ADDRESS := $(zload-y) else VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \ - $(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS)) + $(obj)/vmlinux.bin $(LINKER_LOAD_ADDRESS)) endif UIMAGE_LOADADDR = $(VMLINUZ_LOAD_ADDRESS) diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index d429a69bfe30..19027129add8 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -1,17 +1,19 @@ # SPDX-License-Identifier: GPL-2.0 -subdir-y += brcm -subdir-y += cavium-octeon -subdir-y += img -subdir-y += ingenic -subdir-y += lantiq -subdir-y += loongson -subdir-y += mscc -subdir-y += mti -subdir-y += netlogic -subdir-y += ni -subdir-y += pic32 -subdir-y += qca -subdir-y += ralink -subdir-y += xilfpga +subdir-$(CONFIG_BMIPS_GENERIC) += brcm +subdir-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon +subdir-$(CONFIG_MACH_PISTACHIO) += img +subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img +subdir-$(CONFIG_MACH_INGENIC) += ingenic +subdir-$(CONFIG_LANTIQ) += lantiq +subdir-$(CONFIG_MACH_LOONGSON64) += loongson +subdir-$(CONFIG_MSCC_OCELOT) += mscc +subdir-$(CONFIG_MIPS_MALTA) += mti +subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti +subdir-$(CONFIG_NLM_XLP_BOARD) += netlogic +subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni +subdir-$(CONFIG_MACH_PIC32) += pic32 +subdir-$(CONFIG_ATH79) += qca +subdir-$(CONFIG_RALINK) += ralink +subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += xilfpga obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y)) diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index db0ca250bd1a..75f5bfbf2c37 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -386,6 +386,9 @@ interrupt-parent = <&gpe>; interrupts = <19 4>; + + nvmem-cells = <ð0_addr>; + nvmem-cell-names = "mac-address"; }; }; diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts index f58d239c2058..8d22828787d8 100644 --- a/arch/mips/boot/dts/ingenic/gcw0.dts +++ b/arch/mips/boot/dts/ingenic/gcw0.dts @@ -4,6 +4,10 @@ #include "jz4770.dtsi" #include <dt-bindings/clock/ingenic,tcu.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/adc/ingenic,adc.h> +#include <dt-bindings/input/input.h> + / { compatible = "gcw,zero", "ingenic,jz4770"; model = "GCW Zero"; @@ -15,20 +19,370 @@ serial3 = &uart3; }; + memory: memory { + device_type = "memory"; + reg = <0x0 0x10000000>, + <0x30000000 0x10000000>; + }; + chosen { stdout-path = "serial2:57600n8"; }; - board { - compatible = "simple-bus"; + vcc: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vcc"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + mmc1_power: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "mmc1_vcc"; + gpio = <&gpe 9 0>; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc>; + }; + + headphones_amp: analog-amplifier@0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpf 3 GPIO_ACTIVE_LOW>; + enable-delay-ms = <50>; + + VCC-supply = <&ldo5>; + sound-name-prefix = "Headphones Amp"; + }; + + speaker_amp: analog-amplifier@1 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpf 20 GPIO_ACTIVE_HIGH>; + + VCC-supply = <&ldo5>; + sound-name-prefix = "Speaker Amp"; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "gcw0-audio"; + simple-audio-card,format = "i2s"; + + simple-audio-card,widgets = + "Speaker", "Speaker", + "Headphone", "Headphones", + "Line", "FM Radio", + "Microphone", "Built-in Mic"; + simple-audio-card,routing = + "Headphones Amp INL", "LHPOUT", + "Headphones Amp INR", "RHPOUT", + "Headphones", "Headphones Amp OUTL", + "Headphones", "Headphones Amp OUTR", + "Speaker Amp INL", "LOUT", + "Speaker Amp INR", "ROUT", + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR", + "LLINEIN", "FM Radio", + "RLINEIN", "FM Radio", + "Built-in Mic", "MICBIAS", + "MIC1P", "Built-in Mic", + "MIC1N", "Built-in Mic"; + simple-audio-card,pin-switches = "Speaker", "Headphones"; + + simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_HIGH>; + simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>; + + simple-audio-card,bitclock-master = <&dai_codec>; + simple-audio-card,frame-master = <&dai_codec>; + + dai_cpu: simple-audio-card,cpu { + sound-dai = <&aic>; + }; + + dai_codec: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + rumble { + compatible = "pwm-vibrator"; + pwms = <&pwm 4 2000000 0>; + pwm-names = "enable"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_pwm4>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 1 40000 0>; + power-supply = <&vcc>; + + brightness-levels = <0 16 32 48 64 80 96 112 128 + 144 160 176 192 208 224 240 255>; + default-brightness-level = <12>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_pwm1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + autorepeat; + + button@0 { + label = "D-pad up"; + linux,code = <KEY_UP>; + linux,can-disable; + gpios = <&gpe 21 GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "D-pad down"; + linux,code = <KEY_DOWN>; + linux,can-disable; + gpios = <&gpe 25 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "D-pad left"; + linux,code = <KEY_LEFT>; + linux,can-disable; + gpios = <&gpe 23 GPIO_ACTIVE_LOW>; + }; + + button@3 { + label = "D-pad right"; + linux,code = <KEY_RIGHT>; + linux,can-disable; + gpios = <&gpe 24 GPIO_ACTIVE_LOW>; + }; + + button@4 { + label = "Button A"; + linux,code = <KEY_LEFTCTRL>; + linux,can-disable; + gpios = <&gpe 29 GPIO_ACTIVE_LOW>; + }; + + button@5 { + label = "Button B"; + linux,code = <KEY_LEFTALT>; + linux,can-disable; + gpios = <&gpe 20 GPIO_ACTIVE_LOW>; + }; + + button@6 { + label = "Button Y"; + linux,code = <KEY_SPACE>; + linux,can-disable; + gpios = <&gpe 27 GPIO_ACTIVE_LOW>; + }; + + button@7 { + label = "Button X"; + linux,code = <KEY_LEFTSHIFT>; + linux,can-disable; + gpios = <&gpe 28 GPIO_ACTIVE_LOW>; + }; + + button@8 { + label = "Left shoulder button"; + linux,code = <KEY_TAB>; + linux,can-disable; + gpios = <&gpb 20 GPIO_ACTIVE_LOW>; + }; + + button@9 { + label = "Right shoulder button"; + linux,code = <KEY_BACKSPACE>; + linux,can-disable; + gpios = <&gpe 26 GPIO_ACTIVE_LOW>; + }; + + button@10 { + label = "Start button"; + linux,code = <KEY_ENTER>; + linux,can-disable; + gpios = <&gpb 21 GPIO_ACTIVE_LOW>; + }; + + button@11 { + label = "Select button"; + linux,code = <KEY_ESC>; + linux,can-disable; + /* + * This is the only button that is active high, + * since it doubles as BOOT_SEL1. + */ + gpios = <&gpd 18 GPIO_ACTIVE_HIGH>; + }; + + button@12 { + label = "Power slider"; + linux,code = <KEY_POWER>; + linux,can-disable; + gpios = <&gpa 30 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button@13 { + label = "Power hold"; + linux,code = <KEY_PAUSE>; + linux,can-disable; + gpios = <&gpf 11 GPIO_ACTIVE_LOW>; + }; + }; + + i2c3: i2c-controller@3 { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpd 5 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpd 4 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; /* 250 kHz */ + + act8600: pmic@5a { + compatible = "active-semi,act8600"; + reg = <0x5a>; + + regulators { + /* USB OTG */ + otg_vbus: SUDCDC_REG4 { + /* + * 5.3V instead of 5.0V to compensate + * for the voltage drop of a diode + * between the regulator and the + * connector. + */ + regulator-min-microvolt = <5300000>; + regulator-max-microvolt = <5300000>; + inl-supply = <&vcc>; + }; + + /* + * When this is off, there is no sound, but also + * no USB networking. + */ + ldo5: LDO5 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + inl-supply = <&vcc>; + }; + + /* LCD panel and FM radio */ + ldo6: LDO6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + inl-supply = <&vcc>; + }; + + /* ??? */ + LDO7 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /*regulator-always-on;*/ + inl-supply = <&vcc>; + }; + + /* + * The colors on the LCD are wrong when this is + * off. Which is strange, since the LCD panel + * data sheet only mentions a 3.3V input. + */ + LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + inl-supply = <&vcc>; + }; + + /* RTC fixed 3.3V */ + LDO_REG9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + inl-supply = <&vcc>; + }; + + /* Unused fixed 1.2V */ + LDO_REG10 { + inl-supply = <&vcc>; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led { + gpios = <&gpb 30 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + spi { + compatible = "spi-gpio"; #address-cells = <1>; - #size-cells = <1>; - ranges; + #size-cells = <0>; + + sck-gpios = <&gpe 15 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpe 17 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpe 16 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + nt39016@0 { + compatible = "kingdisplay,kd035g6-54nt"; + reg = <0>; + + spi-max-frequency = <3125000>; + spi-3wire; + spi-cs-high; - otg_phy: otg-phy { - compatible = "usb-nop-xceiv"; - clocks = <&cgu JZ4770_CLK_OTG_PHY>; - clock-names = "main_clk"; + reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; + + backlight = <&backlight>; + power-supply = <&ldo6>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + }; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + label = "mini-USB"; + type = "mini"; + + /* + * USB OTG is not yet working reliably, the ID detection + * mechanism tends to fry easily for unknown reasons. + * Until this is fixed, disable OTG by not providing the + * ID GPIO to the driver. + */ + //id-gpios = <&gpf 18 GPIO_ACTIVE_LOW>; + + vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; + vbus-supply = <&otg_vbus>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_otg>; + + port { + usb_ep: endpoint { + remote-endpoint = <&usb_otg_ep>; + }; }; }; }; @@ -37,24 +391,86 @@ clock-frequency = <12000000>; }; +&pinctrl { + pins_lcd: lcd { + function = "lcd"; + groups = "lcd-24bit"; + }; + + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data"; + }; + + pins_mmc0: mmc0 { + function = "mmc0"; + groups = "mmc0-1bit-a", "mmc0-4bit-a"; + }; + + pins_mmc1: mmc1 { + function = "mmc1"; + groups = "mmc1-1bit-d", "mmc1-4bit-d"; + }; + + pins_otg: otg { + otg-vbus-pin { + function = "otg"; + groups = "otg-vbus"; + }; + + vbus-pin { + pins = "PB5"; + bias-disable; + }; + }; + + pins_pwm1: pwm1 { + function = "pwm1"; + groups = "pwm1"; + }; + + pins_pwm4: pwm4 { + function = "pwm4"; + groups = "pwm4"; + }; +}; + &uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; + status = "okay"; }; &cgu { - /* Put high-speed peripherals under PLL1, such that we can change the + /* + * Put high-speed peripherals under PLL1, such that we can change the * PLL0 frequency on demand without having to suspend peripherals. * We use a rate of 432 MHz, which is the least common multiple of * 27 MHz (required by TV encoder) and 48 MHz (required by USB host). + * Put the GPU under PLL0 since we want a higher frequency. + * Use the 32 kHz oscillator as the parent of the RTC for a higher + * precision. */ assigned-clocks = <&cgu JZ4770_CLK_PLL1>, - <&cgu JZ4770_CLK_UHC>; + <&cgu JZ4770_CLK_GPU>, + <&cgu JZ4770_CLK_RTC>, + <&cgu JZ4770_CLK_UHC>, + <&cgu JZ4770_CLK_LPCLK_MUX>, + <&cgu JZ4770_CLK_MMC0_MUX>, + <&cgu JZ4770_CLK_MMC1_MUX>; assigned-clock-parents = <0>, + <&cgu JZ4770_CLK_PLL0>, + <&cgu JZ4770_CLK_OSC32K>, + <&cgu JZ4770_CLK_PLL1>, + <&cgu JZ4770_CLK_PLL1>, + <&cgu JZ4770_CLK_PLL1>, <&cgu JZ4770_CLK_PLL1>; assigned-clock-rates = - <432000000>; + <432000000>, + <600000000>; }; &uhc { @@ -63,10 +479,69 @@ }; &tcu { - /* 750 kHz for the system timer and clocksource */ - assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>; - assigned-clock-rates = <750000>, <750000>; + /* + * 750 kHz for the system timer and clocksource, 12 MHz for the OST, + * and use RTC as the parent for the watchdog clock + */ + assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>, + <&tcu TCU_CLK_OST>, <&tcu TCU_CLK_WDT>; + assigned-clock-parents = <0>, <0>, <0>, <&cgu JZ4770_CLK_RTC>; + assigned-clock-rates = <750000>, <750000>, <12000000>; - /* PWM1 is in use, so reserve channel #2 for the clocksource */ + /* PWM1 is in use, so use channel #2 for the clocksource */ ingenic,pwm-channels-mask = <0xfa>; }; + +&usb_otg { + port { + usb_otg_ep: endpoint { + remote-endpoint = <&usb_ep>; + }; + }; +}; + +&otg_phy { + vcc-supply = <&ldo5>; +}; + +&rtc { + clocks = <&cgu JZ4770_CLK_RTC>; + clock-names = "rtc"; + + system-power-controller; +}; + +&mmc0 { + status = "okay"; + + bus-width = <4>; + max-frequency = <48000000>; + vmmc-supply = <&vcc>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mmc0>; +}; + +&mmc1 { + status = "okay"; + + bus-width = <4>; + max-frequency = <48000000>; + cd-gpios = <&gpb 2 GPIO_ACTIVE_LOW>; + vmmc-supply = <&mmc1_power>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mmc1>; +}; + +&lcd { + pinctrl-names = "default"; + pinctrl-0 = <&pins_lcd>; + + port { + panel_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; +}; diff --git a/arch/mips/boot/dts/ingenic/gcw0_proto.dts b/arch/mips/boot/dts/ingenic/gcw0_proto.dts new file mode 100644 index 000000000000..02df22f8ae0f --- /dev/null +++ b/arch/mips/boot/dts/ingenic/gcw0_proto.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "gcw0.dts" + +/ { + model = "GCW Zero Prototype"; +}; + +&memory { + /* Prototype has only 256 MiB of RAM */ + reg = <0x0 0x10000000>; +}; diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi index a3301bab9231..1520585c235c 100644 --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi @@ -55,10 +55,10 @@ #clock-cells = <1>; - clocks = <&cgu JZ4740_CLK_RTC - &cgu JZ4740_CLK_EXT - &cgu JZ4740_CLK_PCLK - &cgu JZ4740_CLK_TCU>; + clocks = <&cgu JZ4740_CLK_RTC>, + <&cgu JZ4740_CLK_EXT>, + <&cgu JZ4740_CLK_PCLK>, + <&cgu JZ4740_CLK_TCU>; clock-names = "rtc", "ext", "pclk", "tcu"; interrupt-controller; @@ -74,6 +74,20 @@ clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; }; rtc_dev: rtc@10003000 { @@ -241,10 +255,10 @@ reg = <0x13010000 0x54>; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 0x18000000 0x4000000 - 2 0 0x14000000 0x4000000 - 3 0 0x0c000000 0x4000000 - 4 0 0x08000000 0x4000000>; + ranges = <1 0 0x18000000 0x4000000>, + <2 0 0x14000000 0x4000000>, + <3 0 0x0c000000 0x4000000>, + <4 0 0x08000000 0x4000000>; clocks = <&cgu JZ4740_CLK_MCLK>; }; @@ -258,8 +272,7 @@ dmac: dma-controller@13020000 { compatible = "ingenic,jz4740-dma"; - reg = <0x13020000 0xbc - 0x13020300 0x14>; + reg = <0x13020000 0xbc>, <0x13020300 0x14>; #dma-cells = <2>; interrupt-parent = <&intc>; diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi index 0bfb9edff3d0..fa11ac950499 100644 --- a/arch/mips/boot/dts/ingenic/jz4770.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/clock/jz4770-cgu.h> +#include <dt-bindings/clock/ingenic,tcu.h> / { #address-cells = <1>; @@ -37,13 +38,25 @@ }; cgu: jz4770-cgu@10000000 { - compatible = "ingenic,jz4770-cgu"; + compatible = "ingenic,jz4770-cgu", "simple-mfd"; reg = <0x10000000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10000000 0x100>; clocks = <&ext>, <&osc32k>; clock-names = "ext", "osc32k"; #clock-cells = <1>; + + otg_phy: usb-phy@3c { + compatible = "ingenic,jz4770-phy"; + reg = <0x3c 0x10>; + + clocks = <&cgu JZ4770_CLK_OTG_PHY>; + + #phy-cells = <0>; + }; }; tcu: timer@10002000 { @@ -55,9 +68,9 @@ #clock-cells = <1>; - clocks = <&cgu JZ4770_CLK_RTC - &cgu JZ4770_CLK_EXT - &cgu JZ4770_CLK_PCLK>; + clocks = <&cgu JZ4770_CLK_RTC>, + <&cgu JZ4770_CLK_EXT>, + <&cgu JZ4770_CLK_PCLK>; clock-names = "rtc", "ext", "pclk"; interrupt-controller; @@ -65,6 +78,47 @@ interrupt-parent = <&intc>; interrupts = <27 26 25>; + + watchdog: watchdog@0 { + compatible = "ingenic,jz4770-watchdog", + "ingenic,jz4740-watchdog"; + reg = <0x0 0xc>; + + clocks = <&tcu TCU_CLK_WDT>; + clock-names = "wdt"; + }; + + pwm: pwm@40 { + compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; + + ost: timer@e0 { + compatible = "ingenic,jz4770-ost"; + reg = <0xe0 0x20>; + + clocks = <&tcu TCU_CLK_OST>; + clock-names = "ost"; + + interrupts = <15>; + }; + }; + + rtc: rtc@10003000 { + compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc"; + reg = <0x10003000 0x40>; + + interrupt-parent = <&intc>; + interrupts = <32>; }; pinctrl: pin-controller@10010000 { @@ -165,6 +219,93 @@ }; }; + aic: audio-controller@10020000 { + compatible = "ingenic,jz4770-i2s"; + reg = <0x10020000 0x94>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>, + <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>; + clock-names = "aic", "i2s", "ext", "pll half"; + + interrupt-parent = <&intc>; + interrupts = <34>; + + dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>; + dma-names = "rx", "tx"; + }; + + codec: audio-codec@100200a0 { + compatible = "ingenic,jz4770-codec"; + reg = <0x100200a4 0x8>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4770_CLK_AIC>; + clock-names = "aic"; + }; + + mmc0: mmc@10021000 { + compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc"; + reg = <0x10021000 0x1000>; + + clocks = <&cgu JZ4770_CLK_MMC0>; + clock-names = "mmc"; + + interrupt-parent = <&intc>; + interrupts = <37>; + + dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>; + dma-names = "rx", "tx"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + status = "disabled"; + }; + + mmc1: mmc@10022000 { + compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc"; + reg = <0x10022000 0x1000>; + + clocks = <&cgu JZ4770_CLK_MMC1>; + clock-names = "mmc"; + + interrupt-parent = <&intc>; + interrupts = <36>; + + dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>; + dma-names = "rx", "tx"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + status = "disabled"; + }; + + mmc2: mmc@10023000 { + compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc"; + reg = <0x10023000 0x1000>; + + clocks = <&cgu JZ4770_CLK_MMC2>; + clock-names = "mmc"; + + interrupt-parent = <&intc>; + interrupts = <35>; + + dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>; + dma-names = "rx", "tx"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + status = "disabled"; + }; + uart0: serial@10030000 { compatible = "ingenic,jz4770-uart"; reg = <0x10030000 0x100>; @@ -217,34 +358,63 @@ status = "disabled"; }; + adc: adc@10070000 { + compatible = "ingenic,jz4770-adc"; + reg = <0x10070000 0x30>; + + #io-channel-cells = <1>; + + clocks = <&cgu JZ4770_CLK_ADC>; + clock-names = "adc"; + + interrupt-parent = <&intc>; + interrupts = <18>; + }; + + gpu: gpu@13040000 { + compatible = "vivante,gc"; + reg = <0x13040000 0x10000>; + + clocks = <&cgu JZ4770_CLK_GPU>, + <&cgu JZ4770_CLK_GPU>, + <&cgu JZ4770_CLK_GPU>; + clock-names = "bus", "core", "shader"; + + interrupt-parent = <&intc>; + interrupts = <6>; + }; + + lcd: lcd-controller@13050000 { + compatible = "ingenic,jz4770-lcd"; + reg = <0x13050000 0x300>; + + interrupt-parent = <&intc>; + interrupts = <31>; + + clocks = <&cgu JZ4770_CLK_LPCLK_MUX>; + clock-names = "lcd_pclk"; + }; + dmac0: dma-controller@13420000 { compatible = "ingenic,jz4770-dma"; - reg = <0x13420000 0xC0 - 0x13420300 0x20>; + reg = <0x13420000 0xC0>, <0x13420300 0x20>; - #dma-cells = <1>; + #dma-cells = <2>; clocks = <&cgu JZ4770_CLK_DMA>; interrupt-parent = <&intc>; interrupts = <24>; - - /* Disable dmac0 until we have something that uses it */ - status = "disabled"; }; dmac1: dma-controller@13420100 { compatible = "ingenic,jz4770-dma"; - reg = <0x13420100 0xC0 - 0x13420400 0x20>; + reg = <0x13420100 0xC0>, <0x13420400 0x20>; - #dma-cells = <1>; + #dma-cells = <2>; clocks = <&cgu JZ4770_CLK_DMA>; interrupt-parent = <&intc>; interrupts = <23>; - - /* Disable dmac1 until we have something that uses it */ - status = "disabled"; }; uhc: uhc@13430000 { @@ -260,4 +430,29 @@ status = "disabled"; }; + + usb_otg: usb@13440000 { + compatible = "ingenic,jz4770-musb"; + reg = <0x13440000 0x10000>; + + clocks = <&cgu JZ4770_CLK_OTG>; + clock-names = "udc"; + + interrupt-parent = <&intc>; + interrupts = <21>; + interrupt-names = "mc"; + + phys = <&otg_phy>; + + usb-role-switch; + }; + + rom: memory@1fc00000 { + compatible = "mtd-rom"; + probe-type = "map_rom"; + reg = <0x1fc00000 0x2000>; + + bank-width = <4>; + device-width = <1>; + }; }; diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi index bb89653d16a3..b7f409a7cf5d 100644 --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi @@ -58,9 +58,9 @@ #clock-cells = <1>; - clocks = <&cgu JZ4780_CLK_RTCLK - &cgu JZ4780_CLK_EXCLK - &cgu JZ4780_CLK_PCLK>; + clocks = <&cgu JZ4780_CLK_RTCLK>, + <&cgu JZ4780_CLK_EXCLK>, + <&cgu JZ4780_CLK_PCLK>; clock-names = "rtc", "ext", "pclk"; interrupt-controller; @@ -76,6 +76,30 @@ clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, + <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; + clock-names = "timer0", "timer1", "timer2", "timer3", + "timer4", "timer5", "timer6", "timer7"; + }; + + ost: timer@e0 { + compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost"; + reg = <0xe0 0x20>; + + clocks = <&tcu TCU_CLK_OST>; + clock-names = "ost"; + + interrupts = <15>; + }; }; rtc_dev: rtc@10003000 { @@ -196,8 +220,7 @@ gpio-miso = <&gpe 14 0>; gpio-sck = <&gpe 15 0>; gpio-mosi = <&gpe 17 0>; - cs-gpios = <&gpe 16 0 - &gpe 18 0>; + cs-gpios = <&gpe 16 0>, <&gpe 18 0>; spidev@0 { compatible = "spidev"; @@ -358,26 +381,40 @@ }; nemc: nemc@13410000 { - compatible = "ingenic,jz4780-nemc"; + compatible = "ingenic,jz4780-nemc", "simple-mfd"; reg = <0x13410000 0x10000>; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 0x1b000000 0x1000000 - 2 0 0x1a000000 0x1000000 - 3 0 0x19000000 0x1000000 - 4 0 0x18000000 0x1000000 - 5 0 0x17000000 0x1000000 - 6 0 0x16000000 0x1000000>; + ranges = <0 0 0x13410000 0x10000>, + <1 0 0x1b000000 0x1000000>, + <2 0 0x1a000000 0x1000000>, + <3 0 0x19000000 0x1000000>, + <4 0 0x18000000 0x1000000>, + <5 0 0x17000000 0x1000000>, + <6 0 0x16000000 0x1000000>; clocks = <&cgu JZ4780_CLK_NEMC>; status = "disabled"; + + efuse: efuse@d0 { + reg = <0 0xd0 0x30>; + compatible = "ingenic,jz4780-efuse"; + + clocks = <&cgu JZ4780_CLK_AHB2>; + + #address-cells = <1>; + #size-cells = <1>; + + eth0_addr: eth-mac-addr@0x22 { + reg = <0x22 0x6>; + }; + }; }; dma: dma@13420000 { compatible = "ingenic,jz4780-dma"; - reg = <0x13420000 0x400 - 0x13421000 0x40>; + reg = <0x13420000 0x400>, <0x13421000 0x40>; #dma-cells = <2>; interrupt-parent = <&intc>; diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi index 147f7d5c243a..59a63a0985a8 100644 --- a/arch/mips/boot/dts/ingenic/x1000.dtsi +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi @@ -58,9 +58,9 @@ #clock-cells = <1>; - clocks = <&cgu X1000_CLK_RTCLK - &cgu X1000_CLK_EXCLK - &cgu X1000_CLK_PCLK>; + clocks = <&cgu X1000_CLK_RTCLK>, + <&cgu X1000_CLK_EXCLK>, + <&cgu X1000_CLK_PCLK>; clock-names = "rtc", "ext", "pclk"; interrupt-controller; @@ -239,8 +239,7 @@ pdma: dma-controller@13420000 { compatible = "ingenic,x1000-dma"; - reg = <0x13420000 0x400 - 0x13421000 0x40>; + reg = <0x13420000 0x400>, <0x13421000 0x40>; #dma-cells = <2>; interrupt-parent = <&intc>; diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi index 45c54d555fa4..d0d5d60a8697 100644 --- a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi +++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi @@ -9,6 +9,18 @@ 0 0x40000000 0 0x40000000 0 0x40000000 0xfd 0xfe000000 0xfd 0xfe000000 0 0x2000000 /* PCI Config Space */>; + pci@1a000000 { + compatible = "loongson,rs780e-pci"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + reg = <0 0x1a000000 0 0x02000000>; + + ranges = <0x01000000 0 0x00004000 0 0x18004000 0 0x00004000>, + <0x02000000 0 0x40000000 0 0x40000000 0 0x40000000>; + }; + isa { compatible = "isa"; #address-cells = <2>; @@ -21,6 +33,11 @@ interrupts = <8>; interrupt-parent = <&htpic>; }; + + acpi@800 { + compatible = "loongson,rs780e-acpi"; + reg = <1 0x800 0x100>; + }; }; }; }; diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi index 797d336db54d..f94e8a02ed06 100644 --- a/arch/mips/boot/dts/mscc/ocelot.dtsi +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -214,7 +214,7 @@ miim1: miim1 { pins = "GPIO_14", "GPIO_15"; - function = "miim1"; + function = "miim"; }; }; diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi index 8f5aed760abb..83b3c0ce135a 100644 --- a/arch/mips/boot/dts/qca/ar9331.dtsi +++ b/arch/mips/boot/dts/qca/ar9331.dtsi @@ -59,7 +59,7 @@ #qca,ddr-wb-channel-cells = <1>; }; - uart: uart@18020000 { + uart: serial@18020000 { compatible = "qca,ar9330-uart"; reg = <0x18020000 0x14>; diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts index 0f2b20044834..7695d326df11 100644 --- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts +++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts @@ -3,6 +3,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "ar9331.dtsi" @@ -22,8 +23,9 @@ leds { compatible = "gpio-leds"; - system { - label = "dpt-module:green:system"; + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; default-state = "off"; }; diff --git a/arch/mips/cavium-octeon/Platform b/arch/mips/cavium-octeon/Platform index 45be853700e6..4adef38dea9d 100644 --- a/arch/mips/cavium-octeon/Platform +++ b/arch/mips/cavium-octeon/Platform @@ -1,7 +1,6 @@ # # Cavium Octeon # -platform-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon/ cflags-$(CONFIG_CAVIUM_OCTEON_SOC) += \ -I$(srctree)/arch/mips/include/asm/mach-cavium-octeon load-$(CONFIG_CAVIUM_OCTEON_SOC) += 0xffffffff81100000 diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c index cc94cfa545b4..cb210d2ef0c4 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c @@ -59,18 +59,6 @@ int __cvmx_helper_npi_probe(int interface) && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) /* The packet engines didn't exist before pass 2 */ return 4; -#if 0 - /* - * Technically CN30XX, CN31XX, and CN50XX contain packet - * engines, but nobody ever uses them. Since this is the case, - * we disable them here. - */ - else if (OCTEON_IS_MODEL(OCTEON_CN31XX) - || OCTEON_IS_MODEL(OCTEON_CN50XX)) - return 2; - else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) - return 1; -#endif #endif return 0; } diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c index b077597c668a..b0efc35e95c4 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-pko.c +++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c @@ -489,7 +489,7 @@ cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, config.s.qos_mask = 0xff; break; } - /* fall through - to the error case, when Pass 1 */ + fallthrough; /* to the error case, when Pass 1 */ default: cvmx_dprintf("ERROR: cvmx_pko_config_port: Invalid " "priority %llu\n", diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index 51685f893eab..d56e9b9d2e43 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -141,7 +141,7 @@ static void octeon2_usb_clocks_start(struct device *dev) default: pr_err("Invalid UCTL clock rate of %u, using 12000000 instead\n", clock_rate); - /* Fall through */ + fallthrough; case 12000000: clk_rst_ctl.s.p_refclk_div = 0; break; @@ -1116,7 +1116,7 @@ end_led: new_f[0] = cpu_to_be32(48000000); fdt_setprop_inplace(initial_boot_params, usbn, "refclk-frequency", new_f, sizeof(new_f)); - /* Fall through ...*/ + fallthrough; case USB_CLOCK_TYPE_REF_12: /* Missing "refclk-type" defaults to external. */ fdt_nop_property(initial_boot_params, usbn, "refclk-type"); diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c index cc88a08bc1f7..1fd85c559700 100644 --- a/arch/mips/cavium-octeon/octeon-usb.c +++ b/arch/mips/cavium-octeon/octeon-usb.c @@ -398,7 +398,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) default: dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n", clock_rate); - /* fall through */ + fallthrough; case 100000000: mpll_mul = 0x19; if (ref_clk_sel < 2) diff --git a/arch/mips/cobalt/Platform b/arch/mips/cobalt/Platform index 34123efd6dfe..4254895ad6f4 100644 --- a/arch/mips/cobalt/Platform +++ b/arch/mips/cobalt/Platform @@ -1,6 +1,5 @@ # # Cobalt Server # -platform-$(CONFIG_MIPS_COBALT) += cobalt/ cflags-$(CONFIG_MIPS_COBALT) += -I$(srctree)/arch/mips/include/asm/mach-cobalt load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000 diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig index 3d14d67dc746..96622a2ad333 100644 --- a/arch/mips/configs/ath79_defconfig +++ b/arch/mips/configs/ath79_defconfig @@ -46,7 +46,6 @@ CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_NETDEVICES=y CONFIG_ATH9K=m diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig index 0db0088bbc1c..e511fe0243a5 100644 --- a/arch/mips/configs/ci20_defconfig +++ b/arch/mips/configs/ci20_defconfig @@ -1,5 +1,4 @@ # CONFIG_LOCALVERSION_AUTO is not set -CONFIG_MODULES=y CONFIG_KERNEL_XZ=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -29,6 +28,7 @@ CONFIG_HIGHMEM=y CONFIG_HZ_100=y # CONFIG_SECCOMP is not set # CONFIG_SUSPEND is not set +CONFIG_MODULES=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_COMPACTION is not set CONFIG_CMA=y @@ -38,17 +38,12 @@ CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y # CONFIG_FW_LOADER is not set # CONFIG_ALLOW_DEV_COREDUMP is not set -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=32 CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_JZ4780=y @@ -72,9 +67,8 @@ CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_KEYBOARD_GPIO=m # CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_LEGACY_PTY_COUNT=2 CONFIG_SERIAL_8250=y @@ -89,7 +83,7 @@ CONFIG_I2C_JZ4780=y CONFIG_SPI=y CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_KEYBOARD_GPIO=m +CONFIG_POWER_SUPPLY=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_JZ4740_WDT=y @@ -97,17 +91,45 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ACT8865=y +CONFIG_RC_CORE=m +CONFIG_LIRC=y +CONFIG_RC_DEVICES=y +CONFIG_IR_GPIO_CIR=m +CONFIG_IR_GPIO_TX=m +CONFIG_MEDIA_SUPPORT=m # CONFIG_VGA_CONSOLE is not set # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_JZ4740=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_MTD=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_ACTIVITY=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=y +CONFIG_LEDS_TRIGGER_CAMERA=m +CONFIG_LEDS_TRIGGER_PANIC=y +CONFIG_LEDS_TRIGGER_NETDEV=y +CONFIG_LEDS_TRIGGER_PATTERN=y +CONFIG_LEDS_TRIGGER_AUDIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_JZ4740=y CONFIG_DMADEVICES=y CONFIG_DMA_JZ4780=y +CONFIG_INGENIC_OST=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_MEMORY=y +CONFIG_PWM=y +CONFIG_PWM_JZ4740=m CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_PROC_KCORE=y @@ -156,11 +178,13 @@ CONFIG_NLS_ISO8859_15=y CONFIG_NLS_KOI8_R=y CONFIG_NLS_KOI8_U=y CONFIG_NLS_UTF8=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_STRIP_ASM_SYMS=y -CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_PANIC_ON_OOPS=y CONFIG_PANIC_TIMEOUT=10 # CONFIG_SCHED_DEBUG is not set @@ -169,21 +193,3 @@ CONFIG_STACKTRACE=y # CONFIG_FTRACE is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused" -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_MTD=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_LEDS_TRIGGER_TRANSIENT=y -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_LIRC=y -CONFIG_MEDIA_SUPPORT=m -CONFIG_RC_DEVICES=y -CONFIG_IR_GPIO_CIR=m -CONFIG_IR_GPIO_TX=m diff --git a/arch/mips/configs/db1xxx_defconfig b/arch/mips/configs/db1xxx_defconfig index e6f3e8e3da39..b8bd66300996 100644 --- a/arch/mips/configs/db1xxx_defconfig +++ b/arch/mips/configs/db1xxx_defconfig @@ -92,7 +92,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_M25P80=y CONFIG_MTD_SST25L=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ECC_SW_BCH=y diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig index a3e3eb3c5a8b..48131cb47e66 100644 --- a/arch/mips/configs/gcw0_defconfig +++ b/arch/mips/configs/gcw0_defconfig @@ -1,27 +1,152 @@ +CONFIG_DEFAULT_HOSTNAME="gcw0" CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_EMBEDDED=y +CONFIG_PROFILING=y CONFIG_MACH_INGENIC=y CONFIG_JZ4770_GCW0=y CONFIG_HIGHMEM=y # CONFIG_SECCOMP is not set -# CONFIG_SUSPEND is not set +CONFIG_MIPS_RAW_APPENDED_DTB=y +CONFIG_MIPS_CMDLINE_DTB_EXTEND=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BOUNCE is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_CFG80211=y +CONFIG_MAC80211=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 CONFIG_NETDEVICES=y +# CONFIG_ETHERNET is not set +# CONFIG_WLAN_VENDOR_ADMTEK is not set +# CONFIG_WLAN_VENDOR_ATH is not set +# CONFIG_WLAN_VENDOR_ATMEL is not set +# CONFIG_WLAN_VENDOR_BROADCOM is not set +# CONFIG_WLAN_VENDOR_CISCO is not set +# CONFIG_WLAN_VENDOR_INTEL is not set +# CONFIG_WLAN_VENDOR_INTERSIL is not set +# CONFIG_WLAN_VENDOR_MARVELL is not set +# CONFIG_WLAN_VENDOR_MEDIATEK is not set +# CONFIG_WLAN_VENDOR_RALINK is not set +CONFIG_RTL8192CU=m +# CONFIG_RTLWIFI_DEBUG is not set +# CONFIG_WLAN_VENDOR_RSI is not set +# CONFIG_WLAN_VENDOR_ST is not set +# CONFIG_WLAN_VENDOR_TI is not set +# CONFIG_WLAN_VENDOR_ZYDAS is not set +# CONFIG_WLAN_VENDOR_QUANTENNA is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_JOYSTICK=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +CONFIG_INPUT_PWM_VIBRA=y +# CONFIG_SERIO is not set CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_INGENIC=y +CONFIG_HW_RANDOM=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_GPIO=y +CONFIG_POWER_SUPPLY=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_JZ4740_WDT=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_ACT8865=y +CONFIG_DRM=y +CONFIG_DRM_FBDEV_OVERALLOC=300 +CONFIG_DRM_PANEL_NOVATEK_NT39016=y +CONFIG_DRM_INGENIC=y +CONFIG_DRM_ETNAVIV=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_PROC_FS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_MIPS is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_JZ4740_SOC_I2S=y +CONFIG_SND_SOC_JZ4770_CODEC=y +CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y +CONFIG_SND_SIMPLE_CARD=y +CONFIG_USB_CONN_GPIO=y CONFIG_USB=y +CONFIG_USB_OTG=y +CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_TMPFS=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_MUSB_JZ4740=y +CONFIG_USB_INVENTRA_DMA=y +CONFIG_JZ4770_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_ETH=y +CONFIG_MMC=y +# CONFIG_PWRSEQ_EMMC is not set +# CONFIG_PWRSEQ_SIMPLE is not set +CONFIG_MMC_JZ4740=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_PANIC=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_NVMEM is not set +CONFIG_RTC_DRV_JZ4740=y +CONFIG_DMADEVICES=y +CONFIG_DMA_JZ4780=y +# CONFIG_VIRTIO_MENU is not set +CONFIG_STAGING=y +CONFIG_R8188EU=m +CONFIG_INGENIC_OST=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_IIO_BUFFER=y +CONFIG_IIO_BUFFER_CB=y +CONFIG_IIO_KFIFO_BUF=y +CONFIG_MXC6255=m +CONFIG_INGENIC_ADC=y +CONFIG_PWM=y +CONFIG_PWM_JZ4740=y +CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_FILE_DIRECT=y +CONFIG_SQUASHFS_DECOMP_MULTI=y +# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity" +CONFIG_CRYPTO_ECHAINIV=y +CONFIG_FONTS=y +CONFIG_FONT_6x10=y +CONFIG_DEBUG_FS=y diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config index 7626f2a75b03..510709565404 100644 --- a/arch/mips/configs/generic/board-ocelot.config +++ b/arch/mips/configs/generic/board-ocelot.config @@ -9,7 +9,6 @@ CONFIG_GENERIC_PHY=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_M25P80=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_SPI_NOR=y diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig deleted file mode 100644 index 00cf461db971..000000000000 --- a/arch/mips/configs/lasat_defconfig +++ /dev/null @@ -1,55 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_TIMERFD is not set -# CONFIG_EVENTFD is not set -# CONFIG_KALLSYMS is not set -CONFIG_SLAB=y -CONFIG_LASAT=y -CONFIG_PICVUE=y -CONFIG_PICVUE_PROC=y -CONFIG_DS1603=y -CONFIG_LASAT_SYSCTL=y -CONFIG_HZ_1000=y -# CONFIG_SECCOMP is not set -CONFIG_PCI=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_CMD64X=y -CONFIG_ATA_GENERIC=y -CONFIG_PATA_LEGACY=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO_RAW=y -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_PCI is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_MAGIC_SYSRQ=y diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index 51675f5000d6..3d4c7e9996c5 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -21,6 +21,7 @@ CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y CONFIG_MACH_LOONGSON64=y CONFIG_SMP=y CONFIG_HZ_256=y @@ -216,6 +217,7 @@ CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y CONFIG_RAW_DRIVER=m CONFIG_I2C_CHARDEV=y @@ -229,7 +231,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y -CONFIG_DRM_RADEON=y +CONFIG_DRM_RADEON=m CONFIG_FB_RADEON=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=m diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig deleted file mode 100644 index 507ad91b21e7..000000000000 --- a/arch/mips/configs/markeins_defconfig +++ /dev/null @@ -1,185 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_PREEMPT=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_NEC_MARKEINS=y -CONFIG_HZ_1000=y -CONFIG_PCI=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_SCSI=m -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_CHELSIO_T3=m -CONFIG_NATSEMI=y -CONFIG_QLA3XXX=m -CONFIG_NETXEN_NIC=m -CONFIG_PPP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_DEBUG_CORE=y -CONFIG_I2C_DEBUG_BUS=y -# CONFIG_HID is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=m -CONFIG_XFS_FS=m -# CONFIG_DNOTIFY is not set -CONFIG_AUTOFS4_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -CONFIG_NLS_DEFAULT="" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw" diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig deleted file mode 100644 index 6ad1a2381226..000000000000 --- a/arch/mips/configs/msp71xx_defconfig +++ /dev/null @@ -1,77 +0,0 @@ -CONFIG_LOCALVERSION="-pmc" -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_PREEMPT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_SHMEM is not set -CONFIG_SLAB=y -CONFIG_PMC_MSP=y -CONFIG_PMC_MSP7120_GW=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_NR_CPUS=2 -CONFIG_PCI=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_INET_AH=y -CONFIG_INET_ESP=y -CONFIG_INET_IPCOMP=y -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_BRIDGE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_RAM=y -CONFIG_MTD_PMC_MSP_EVM=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_PPP=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_SERIAL_8250_PCI is not set -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_PMCMSP=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_STORAGE=y -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_JFFS2_FS=y -CONFIG_SQUASHFS=y -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig index 24e07180c57d..b9adf15ebbec 100644 --- a/arch/mips/configs/pistachio_defconfig +++ b/arch/mips/configs/pistachio_defconfig @@ -127,7 +127,6 @@ CONFIG_DEBUG_DEVRES=y CONFIG_CONNECTOR=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BLOCK=y diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig index 8c2ead53007a..fec5851c164b 100644 --- a/arch/mips/configs/rt305x_defconfig +++ b/arch/mips/configs/rt305x_defconfig @@ -76,7 +76,6 @@ CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_EEPROM_93CX6=m CONFIG_SCSI=y diff --git a/arch/mips/dec/Platform b/arch/mips/dec/Platform index cf55a6f4e720..c82391e832f9 100644 --- a/arch/mips/dec/Platform +++ b/arch/mips/dec/Platform @@ -1,7 +1,6 @@ # # DECstation family # -platform-$(CONFIG_MACH_DECSTATION) += dec/ cflags-$(CONFIG_MACH_DECSTATION) += \ -I$(srctree)/arch/mips/include/asm/mach-dec libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/ diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index a25ef822e725..ea5b5a83f1e1 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -304,8 +304,8 @@ spurious: */ FEXPORT(dec_intr_unimplemented) move a1,t0 # cheats way of printing an arg! - PANIC("Unimplemented cpu interrupt! CP0_CAUSE: 0x%08x"); + ASM_PANIC("Unimplemented cpu interrupt! CP0_CAUSE: 0x%08x"); FEXPORT(asic_intr_unimplemented) move a1,t0 # cheats way of printing an arg! - PANIC("Unimplemented asic interrupt! ASIC ISR: 0x%08x"); + ASM_PANIC("Unimplemented asic interrupt! ASIC ISR: 0x%08x"); diff --git a/arch/mips/dec/tc.c b/arch/mips/dec/tc.c index 732027c79834..dba58397668e 100644 --- a/arch/mips/dec/tc.c +++ b/arch/mips/dec/tc.c @@ -52,7 +52,7 @@ int __init tc_bus_get_info(struct tc_bus *tbus) case MACH_DS5900: tbus->ext_slot_base = 0x20000000; tbus->ext_slot_size = 0x20000000; - /* fall through */ + fallthrough; case MACH_DS5000_1XX: tbus->num_tcslots = 3; break; diff --git a/arch/mips/emma/Makefile b/arch/mips/emma/Makefile deleted file mode 100644 index bc03082064ca..000000000000 --- a/arch/mips/emma/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_SOC_EMMA2RH) += common/ - -# -# NEC EMMA2RH Mark-eins -# -obj-$(CONFIG_NEC_MARKEINS) += markeins/ diff --git a/arch/mips/emma/Platform b/arch/mips/emma/Platform deleted file mode 100644 index 0282f7f99b88..000000000000 --- a/arch/mips/emma/Platform +++ /dev/null @@ -1,4 +0,0 @@ -platform-$(CONFIG_SOC_EMMA2RH) += emma/ -cflags-$(CONFIG_SOC_EMMA2RH) += \ - -I$(srctree)/arch/mips/include/asm/mach-emma2rh -load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000 diff --git a/arch/mips/emma/common/Makefile b/arch/mips/emma/common/Makefile deleted file mode 100644 index a754abd1beb9..000000000000 --- a/arch/mips/emma/common/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-or-later -# -# Copyright (C) NEC Electronics Corporation 2005-2006 -# - -obj-$(CONFIG_NEC_MARKEINS) += prom.o diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c deleted file mode 100644 index 7c3a6f32beda..000000000000 --- a/arch/mips/emma/common/prom.c +++ /dev/null @@ -1,56 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/common/prom.c - * - * Copyright 2001 MontaVista Software Inc. - */ -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/memblock.h> - -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm/emma/emma2rh.h> - -const char *get_system_type(void) -{ -#ifdef CONFIG_NEC_MARKEINS - return "NEC EMMA2RH Mark-eins"; -#else -#error Unknown NEC board -#endif -} - -/* [jsun@junsun.net] PMON passes arguments in C main() style */ -void __init prom_init(void) -{ - int argc = fw_arg0; - char **arg = (char **)fw_arg1; - int i; - - /* if user passes kernel args, ignore the default one */ - if (argc > 1) - arcs_cmdline[0] = '\0'; - - /* arg[0] is "g", the rest is boot parameters */ - for (i = 1; i < argc; i++) { - if (strlen(arcs_cmdline) + strlen(arg[i]) + 1 - >= sizeof(arcs_cmdline)) - break; - strcat(arcs_cmdline, arg[i]); - strcat(arcs_cmdline, " "); - } - -#ifdef CONFIG_NEC_MARKEINS - add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM); -#else -#error Unknown NEC board -#endif -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/emma/markeins/Makefile b/arch/mips/emma/markeins/Makefile deleted file mode 100644 index 8c8649069504..000000000000 --- a/arch/mips/emma/markeins/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-or-later -# -# Copyright (C) NEC Electronics Corporation 2005-2006 -# - -obj-$(CONFIG_NEC_MARKEINS) += irq.o setup.o led.o platform.o diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c deleted file mode 100644 index 4aebf559be2e..000000000000 --- a/arch/mips/emma/markeins/irq.c +++ /dev/null @@ -1,293 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c - * - * Copyright 2001 MontaVista Software Inc. - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/delay.h> - -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> - -#include <asm/emma/emma2rh.h> - -static void emma2rh_irq_enable(struct irq_data *d) -{ - unsigned int irq = d->irq - EMMA2RH_IRQ_BASE; - u32 reg_value, reg_bitmask, reg_index; - - reg_index = EMMA2RH_BHIF_INT_EN_0 + - (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32); - reg_value = emma2rh_in32(reg_index); - reg_bitmask = 0x1 << (irq % 32); - emma2rh_out32(reg_index, reg_value | reg_bitmask); -} - -static void emma2rh_irq_disable(struct irq_data *d) -{ - unsigned int irq = d->irq - EMMA2RH_IRQ_BASE; - u32 reg_value, reg_bitmask, reg_index; - - reg_index = EMMA2RH_BHIF_INT_EN_0 + - (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32); - reg_value = emma2rh_in32(reg_index); - reg_bitmask = 0x1 << (irq % 32); - emma2rh_out32(reg_index, reg_value & ~reg_bitmask); -} - -struct irq_chip emma2rh_irq_controller = { - .name = "emma2rh_irq", - .irq_mask = emma2rh_irq_disable, - .irq_unmask = emma2rh_irq_enable, -}; - -void emma2rh_irq_init(void) -{ - u32 i; - - for (i = 0; i < NUM_EMMA2RH_IRQ; i++) - irq_set_chip_and_handler_name(EMMA2RH_IRQ_BASE + i, - &emma2rh_irq_controller, - handle_level_irq, "level"); -} - -static void emma2rh_sw_irq_enable(struct irq_data *d) -{ - unsigned int irq = d->irq - EMMA2RH_SW_IRQ_BASE; - u32 reg; - - reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - reg |= 1 << irq; - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); -} - -static void emma2rh_sw_irq_disable(struct irq_data *d) -{ - unsigned int irq = d->irq - EMMA2RH_SW_IRQ_BASE; - u32 reg; - - reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg); -} - -struct irq_chip emma2rh_sw_irq_controller = { - .name = "emma2rh_sw_irq", - .irq_mask = emma2rh_sw_irq_disable, - .irq_unmask = emma2rh_sw_irq_enable, -}; - -void emma2rh_sw_irq_init(void) -{ - u32 i; - - for (i = 0; i < NUM_EMMA2RH_IRQ_SW; i++) - irq_set_chip_and_handler_name(EMMA2RH_SW_IRQ_BASE + i, - &emma2rh_sw_irq_controller, - handle_level_irq, "level"); -} - -static void emma2rh_gpio_irq_enable(struct irq_data *d) -{ - unsigned int irq = d->irq - EMMA2RH_GPIO_IRQ_BASE; - u32 reg; - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg |= 1 << irq; - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} - -static void emma2rh_gpio_irq_disable(struct irq_data *d) -{ - unsigned int irq = d->irq - EMMA2RH_GPIO_IRQ_BASE; - u32 reg; - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} - -static void emma2rh_gpio_irq_ack(struct irq_data *d) -{ - unsigned int irq = d->irq - EMMA2RH_GPIO_IRQ_BASE; - - emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq)); -} - -static void emma2rh_gpio_irq_mask_ack(struct irq_data *d) -{ - unsigned int irq = d->irq - EMMA2RH_GPIO_IRQ_BASE; - u32 reg; - - emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq)); - - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - reg &= ~(1 << irq); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg); -} - -struct irq_chip emma2rh_gpio_irq_controller = { - .name = "emma2rh_gpio_irq", - .irq_ack = emma2rh_gpio_irq_ack, - .irq_mask = emma2rh_gpio_irq_disable, - .irq_mask_ack = emma2rh_gpio_irq_mask_ack, - .irq_unmask = emma2rh_gpio_irq_enable, -}; - -void emma2rh_gpio_irq_init(void) -{ - u32 i; - - for (i = 0; i < NUM_EMMA2RH_IRQ_GPIO; i++) - irq_set_chip_and_handler_name(EMMA2RH_GPIO_IRQ_BASE + i, - &emma2rh_gpio_irq_controller, - handle_edge_irq, "edge"); -} - -/* - * the first level int-handler will jump here if it is a emma2rh irq - */ -void emma2rh_irq_dispatch(void) -{ - u32 intStatus; - u32 bitmask; - u32 i; - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) & - emma2rh_in32(EMMA2RH_BHIF_INT_EN_0); - -#ifdef EMMA2RH_SW_CASCADE - if (intStatus & (1UL << EMMA2RH_SW_CASCADE)) { - u32 swIntStatus; - swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT) - & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN); - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (swIntStatus & bitmask) { - do_IRQ(EMMA2RH_SW_IRQ_BASE + i); - return; - } - } - } - /* Skip S/W interrupt */ - intStatus &= ~(1UL << EMMA2RH_SW_CASCADE); -#endif - - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) & - emma2rh_in32(EMMA2RH_BHIF_INT_EN_1); - -#ifdef EMMA2RH_GPIO_CASCADE - if (intStatus & (1UL << (EMMA2RH_GPIO_CASCADE % 32))) { - u32 gpioIntStatus; - gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST) - & emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) { - if (gpioIntStatus & bitmask) { - do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i); - return; - } - } - } - /* Skip GPIO interrupt */ - intStatus &= ~(1UL << (EMMA2RH_GPIO_CASCADE % 32)); -#endif - - for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } - - intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) & - emma2rh_in32(EMMA2RH_BHIF_INT_EN_2); - - for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) { - if (intStatus & bitmask) { - do_IRQ(EMMA2RH_IRQ_BASE + i); - return; - } - } -} - -void __init arch_init_irq(void) -{ - u32 reg; - int irq; - - /* by default, interrupts are disabled. */ - emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0); - emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0); - emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0); - emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0); - emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0); - - clear_c0_status(0xff00); - set_c0_status(0x0400); - -#define GPIO_PCI (0xf<<15) - /* setup GPIO interrupt for PCI interface */ - /* direction input */ - reg = emma2rh_in32(EMMA2RH_GPIO_DIR); - emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI); - /* disable interrupt */ - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK); - emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI); - /* level triggerd */ - reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE); - emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI); - reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A); - emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI)); - /* interrupt clear */ - emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI); - - /* init all controllers */ - emma2rh_irq_init(); - emma2rh_sw_irq_init(); - emma2rh_gpio_irq_init(); - mips_cpu_irq_init(); - - /* setup cascade interrupts */ - irq = EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE; - if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL)) - pr_err("Failed to request irq %d (cascade)\n", irq); - irq = EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE; - if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL)) - pr_err("Failed to request irq %d (cascade)\n", irq); - irq = MIPS_CPU_IRQ_BASE + 2; - if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL)) - pr_err("Failed to request irq %d (cascade)\n", irq); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) - do_IRQ(MIPS_CPU_IRQ_BASE + 7); - else if (pending & STATUSF_IP2) - emma2rh_irq_dispatch(); - else if (pending & STATUSF_IP1) - do_IRQ(MIPS_CPU_IRQ_BASE + 1); - else if (pending & STATUSF_IP0) - do_IRQ(MIPS_CPU_IRQ_BASE + 0); - else - spurious_interrupt(); -} diff --git a/arch/mips/emma/markeins/led.c b/arch/mips/emma/markeins/led.c deleted file mode 100644 index d377542c0ec4..000000000000 --- a/arch/mips/emma/markeins/led.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) NEC Electronics Corporation 2004-2006 - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/string.h> -#include <asm/emma/emma2rh.h> - -const unsigned long clear = 0x20202020; - -#define LED_BASE 0xb1400038 - -void markeins_led_clear(void) -{ - emma2rh_out32(LED_BASE, clear); - emma2rh_out32(LED_BASE + 4, clear); -} - -void markeins_led(const char *str) -{ - int i; - int len = strlen(str); - - markeins_led_clear(); - if (len > 8) - len = 8; - - if (emma2rh_in32(0xb0000800) & (0x1 << 18)) - for (i = 0; i < len; i++) - emma2rh_out8(LED_BASE + i, str[i]); - else - for (i = 0; i < len; i++) - emma2rh_out8(LED_BASE + (i & 4) + (3 - (i & 3)), - str[i]); -} - -void markeins_led_hex(u32 val) -{ - char str[10]; - - sprintf(str, "%08x", val); - markeins_led(str); -} diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c deleted file mode 100644 index 97eeb9e8fb2b..000000000000 --- a/arch/mips/emma/markeins/platform.c +++ /dev/null @@ -1,199 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright(C) MontaVista Software Inc, 2006 - * - * Author: dmitry pervushin <dpervushin@ru.mvista.com> - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/mtd/physmap.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/addrspace.h> -#include <asm/time.h> -#include <asm/bcache.h> -#include <asm/irq.h> -#include <asm/reboot.h> -#include <asm/traps.h> - -#include <asm/emma/emma2rh.h> - - -#define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */ - -static struct resource i2c_emma_resources_0[] = { - { - .name = NULL, - .start = EMMA2RH_IRQ_PIIC0, - .end = EMMA2RH_IRQ_PIIC0, - .flags = IORESOURCE_IRQ - }, { - .name = NULL, - .start = EMMA2RH_PIIC0_BASE, - .end = EMMA2RH_PIIC0_BASE + 0x1000, - .flags = 0 - }, -}; - -struct resource i2c_emma_resources_1[] = { - { - .name = NULL, - .start = EMMA2RH_IRQ_PIIC1, - .end = EMMA2RH_IRQ_PIIC1, - .flags = IORESOURCE_IRQ - }, { - .name = NULL, - .start = EMMA2RH_PIIC1_BASE, - .end = EMMA2RH_PIIC1_BASE + 0x1000, - .flags = 0 - }, -}; - -struct resource i2c_emma_resources_2[] = { - { - .name = NULL, - .start = EMMA2RH_IRQ_PIIC2, - .end = EMMA2RH_IRQ_PIIC2, - .flags = IORESOURCE_IRQ - }, { - .name = NULL, - .start = EMMA2RH_PIIC2_BASE, - .end = EMMA2RH_PIIC2_BASE + 0x1000, - .flags = 0 - }, -}; - -struct platform_device i2c_emma_devices[] = { - [0] = { - .name = I2C_EMMA2RH, - .id = 0, - .resource = i2c_emma_resources_0, - .num_resources = ARRAY_SIZE(i2c_emma_resources_0), - }, - [1] = { - .name = I2C_EMMA2RH, - .id = 1, - .resource = i2c_emma_resources_1, - .num_resources = ARRAY_SIZE(i2c_emma_resources_1), - }, - [2] = { - .name = I2C_EMMA2RH, - .id = 2, - .resource = i2c_emma_resources_2, - .num_resources = ARRAY_SIZE(i2c_emma_resources_2), - }, -}; - -#define EMMA2RH_SERIAL_CLOCK 18544000 -#define EMMA2RH_SERIAL_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST - -static struct plat_serial8250_port platform_serial_ports[] = { - [0] = { - .membase= (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3), - .mapbase = EMMA2RH_PFUR0_BASE + 3, - .irq = EMMA2RH_IRQ_PFUR0, - .uartclk = EMMA2RH_SERIAL_CLOCK, - .regshift = 4, - .iotype = UPIO_MEM, - .flags = EMMA2RH_SERIAL_FLAGS, - }, [1] = { - .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3), - .mapbase = EMMA2RH_PFUR1_BASE + 3, - .irq = EMMA2RH_IRQ_PFUR1, - .uartclk = EMMA2RH_SERIAL_CLOCK, - .regshift = 4, - .iotype = UPIO_MEM, - .flags = EMMA2RH_SERIAL_FLAGS, - }, [2] = { - .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR2_BASE + 3), - .mapbase = EMMA2RH_PFUR2_BASE + 3, - .irq = EMMA2RH_IRQ_PFUR2, - .uartclk = EMMA2RH_SERIAL_CLOCK, - .regshift = 4, - .iotype = UPIO_MEM, - .flags = EMMA2RH_SERIAL_FLAGS, - }, [3] = { - .flags = 0, - }, -}; - -static struct platform_device serial_emma = { - .name = "serial8250", - .dev = { - .platform_data = &platform_serial_ports, - }, -}; - -static struct mtd_partition markeins_parts[] = { - [0] = { - .name = "RootFS", - .offset = 0x00000000, - .size = 0x00c00000, - }, - [1] = { - .name = "boot code area", - .offset = MTDPART_OFS_APPEND, - .size = 0x00100000, - }, - [2] = { - .name = "kernel image", - .offset = MTDPART_OFS_APPEND, - .size = 0x00300000, - }, - [3] = { - .name = "RootFS2", - .offset = MTDPART_OFS_APPEND, - .size = 0x00c00000, - }, - [4] = { - .name = "boot code area2", - .offset = MTDPART_OFS_APPEND, - .size = 0x00100000, - }, - [5] = { - .name = "kernel image2", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data markeins_flash_data = { - .width = 2, - .nr_parts = ARRAY_SIZE(markeins_parts), - .parts = markeins_parts -}; - -static struct resource markeins_flash_resource = { - .start = 0x1e000000, - .end = 0x02000000, - .flags = IORESOURCE_MEM -}; - -static struct platform_device markeins_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &markeins_flash_data, - }, - .num_resources = 1, - .resource = &markeins_flash_resource, -}; - -static struct platform_device *devices[] = { - i2c_emma_devices, - i2c_emma_devices + 1, - i2c_emma_devices + 2, - &serial_emma, - &markeins_flash_device, -}; - -static int __init platform_devices_setup(void) -{ - return platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -arch_initcall(platform_devices_setup); diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c deleted file mode 100644 index c8a91c2a63bc..000000000000 --- a/arch/mips/emma/markeins/setup.c +++ /dev/null @@ -1,115 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c. - * - * Copyright 2001 MontaVista Software Inc. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/types.h> - -#include <asm/time.h> -#include <asm/reboot.h> - -#include <asm/emma/emma2rh.h> - -#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ - -extern void markeins_led(const char *); - -static int bus_frequency; - -static void markeins_machine_restart(char *command) -{ - static void (*back_to_prom) (void) = (void (*)(void))0xbfc00000; - - printk("cannot EMMA2RH Mark-eins restart.\n"); - markeins_led("restart."); - back_to_prom(); -} - -static void markeins_machine_halt(void) -{ - printk("EMMA2RH Mark-eins halted.\n"); - markeins_led("halted."); - while (1) ; -} - -static void markeins_machine_power_off(void) -{ - markeins_led("poweroff."); - while (1) ; -} - -static unsigned long __initdata emma2rh_clock[4] = { - 166500000, 187312500, 199800000, 210600000 -}; - -static unsigned int __init detect_bus_frequency(unsigned long rtc_base) -{ - u32 reg; - - /* detect from boot strap */ - reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0); - reg = (reg >> 4) & 0x3; - - return emma2rh_clock[reg]; -} - -void __init plat_time_init(void) -{ - u32 reg; - if (bus_frequency == 0) - bus_frequency = detect_bus_frequency(0); - - reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0); - if ((reg & 0x3) == 0) - reg = (reg >> 6) & 0x3; - else { - reg = emma2rh_in32(EMMA2RH_BHIF_MAIN_CTRL); - reg = (reg >> 4) & 0x3; - } - mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2; -} - -static void markeins_board_init(void); -extern void markeins_irq_setup(void); - -static inline void __init markeins_sio_setup(void) -{ -} - -void __init plat_mem_setup(void) -{ - /* initialize board - we don't trust the loader */ - markeins_board_init(); - - set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE)); - - _machine_restart = markeins_machine_restart; - _machine_halt = markeins_machine_halt; - pm_power_off = markeins_machine_power_off; - - /* setup resource limits */ - ioport_resource.start = EMMA2RH_PCI_IO_BASE; - ioport_resource.end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1; - iomem_resource.start = EMMA2RH_IO_BASE; - iomem_resource.end = EMMA2RH_ROM_BASE - 1; - - markeins_sio_setup(); -} - -static void __init markeins_board_init(void) -{ - u32 val; - - val = emma2rh_in32(EMMA2RH_PBRD_INT_EN); /* open serial interrupts. */ - emma2rh_out32(EMMA2RH_PBRD_INT_EN, val | 0xaa); - val = emma2rh_in32(EMMA2RH_PBRD_CLKSEL); /* set serial clocks. */ - emma2rh_out32(EMMA2RH_PBRD_CLKSEL, val | 0x5); /* 18MHz */ - emma2rh_out32(EMMA2RH_PCI_CONTROL, 0); - - markeins_led("MVL E2RH"); -} diff --git a/arch/mips/fw/cfe/cfe_api.c b/arch/mips/fw/cfe/cfe_api.c index c020b29f561c..0c9c97ab291e 100644 --- a/arch/mips/fw/cfe/cfe_api.c +++ b/arch/mips/fw/cfe/cfe_api.c @@ -243,11 +243,6 @@ int cfe_getfwinfo(cfe_fwinfo_t * info) info->fwi_bootarea_pa = xiocb.plist.xiocb_fwinfo.fwi_bootarea_pa; info->fwi_bootarea_size = xiocb.plist.xiocb_fwinfo.fwi_bootarea_size; -#if 0 - info->fwi_reserved1 = xiocb.plist.xiocb_fwinfo.fwi_reserved1; - info->fwi_reserved2 = xiocb.plist.xiocb_fwinfo.fwi_reserved2; - info->fwi_reserved3 = xiocb.plist.xiocb_fwinfo.fwi_reserved3; -#endif return 0; } diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform index eaa19d189324..53c33cb72974 100644 --- a/arch/mips/generic/Platform +++ b/arch/mips/generic/Platform @@ -8,7 +8,6 @@ # option) any later version. # -platform-$(CONFIG_MIPS_GENERIC) += generic/ cflags-$(CONFIG_MIPS_GENERIC) += -I$(srctree)/arch/mips/include/asm/mach-generic load-$(CONFIG_MIPS_GENERIC) += 0xffffffff80100000 all-$(CONFIG_MIPS_GENERIC) := vmlinux.gz.itb diff --git a/arch/mips/include/asm/asm-eva.h b/arch/mips/include/asm/asm-eva.h index d80be38c4144..e327ebc76753 100644 --- a/arch/mips/include/asm/asm-eva.h +++ b/arch/mips/include/asm/asm-eva.h @@ -180,7 +180,7 @@ #define user_ld(reg, addr) kernel_lw(reg, addr) #else #define user_sd(reg, addr) kernel_sd(reg, addr) -#define user_ld(reg, addr) kernel_sd(reg, addr) +#define user_ld(reg, addr) kernel_ld(reg, addr) #endif /* CONFIG_32BIT */ #endif /* CONFIG_EVA */ diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h index c23527ba65d0..3682d1a0bb80 100644 --- a/arch/mips/include/asm/asm.h +++ b/arch/mips/include/asm/asm.h @@ -74,10 +74,15 @@ symbol: .insn .globl symbol; \ symbol = value -#define PANIC(msg) \ +#define TEXT(msg) \ + .pushsection .data; \ +8: .asciiz msg; \ + .popsection; + +#define ASM_PANIC(msg) \ .set push; \ .set reorder; \ - PTR_LA a0, 8f; \ + PTR_LA a0, 8f; \ jal panic; \ 9: b 9b; \ .set pop; \ @@ -87,22 +92,17 @@ symbol = value * Print formatted string */ #ifdef CONFIG_PRINTK -#define PRINT(string) \ +#define ASM_PRINT(string) \ .set push; \ .set reorder; \ - PTR_LA a0, 8f; \ + PTR_LA a0, 8f; \ jal printk; \ .set pop; \ TEXT(string) #else -#define PRINT(string) +#define ASM_PRINT(string) #endif -#define TEXT(msg) \ - .pushsection .data; \ -8: .asciiz msg; \ - .popsection; - /* * Stack alignment */ @@ -202,7 +202,9 @@ symbol = value #define LONG_SRA sra #define LONG_SRAV srav +#ifdef __ASSEMBLY__ #define LONG .word +#endif #define LONGSIZE 4 #define LONGMASK 3 #define LONGLOG 2 @@ -225,7 +227,9 @@ symbol = value #define LONG_SRA dsra #define LONG_SRAV dsrav +#ifdef __ASSEMBLY__ #define LONG .dword +#endif #define LONGSIZE 8 #define LONGMASK 7 #define LONGLOG 3 diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h index 655f40ddb6d1..86f2323ebe6b 100644 --- a/arch/mips/include/asm/asmmacro.h +++ b/arch/mips/include/asm/asmmacro.h @@ -44,7 +44,8 @@ .endm #endif -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ + defined(CONFIG_CPU_MIPSR6) .macro local_irq_enable reg=t0 ei irq_enable_hazard @@ -54,7 +55,7 @@ di irq_disable_hazard .endm -#else +#else /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */ .macro local_irq_enable reg=t0 mfc0 \reg, CP0_STATUS ori \reg, \reg, 1 @@ -79,7 +80,7 @@ sw \reg, TI_PRE_COUNT($28) #endif .endm -#endif /* CONFIG_CPU_MIPSR2 */ +#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */ .macro fpu_save_16even thread tmp=t0 .set push @@ -131,7 +132,7 @@ .macro fpu_save_double thread status tmp #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ - defined(CONFIG_CPU_MIPSR6) + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) sll \tmp, \status, 5 bgez \tmp, 10f fpu_save_16odd \thread @@ -190,7 +191,7 @@ .macro fpu_restore_double thread status tmp #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ - defined(CONFIG_CPU_MIPSR6) + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) sll \tmp, \status, 5 bgez \tmp, 10f # 16 register mode? @@ -200,16 +201,17 @@ fpu_restore_16even \thread \tmp .endm -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ + defined(CONFIG_CPU_MIPSR6) .macro _EXT rd, rs, p, s ext \rd, \rs, \p, \s .endm -#else /* !CONFIG_CPU_MIPSR2 || !CONFIG_CPU_MIPSR6 */ +#else /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */ .macro _EXT rd, rs, p, s srl \rd, \rs, \p andi \rd, \rd, (1 << \s) - 1 .endm -#endif /* !CONFIG_CPU_MIPSR2 || !CONFIG_CPU_MIPSR6 */ +#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */ /* * Temporary until all gas have MT ASE support diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 61727785a247..c3bd9b2d66e4 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -42,17 +42,6 @@ #define MACH_DS5900 10 /* DECsystem 5900 */ /* - * Valid machtype for group PMC-MSP - */ -#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ -#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */ -#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */ -#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */ -#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */ -#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */ -#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */ - -/* * Valid machtype for group Mikrotik */ #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ @@ -121,7 +110,7 @@ extern unsigned long fw_passed_dtb; #endif /* - * Platform memory detection hook called by setup_arch + * Platform memory detection hook called by arch_mem_init() */ extern void plat_mem_setup(void); diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h index da80878f2c0d..fa3dcbf56fa9 100644 --- a/arch/mips/include/asm/branch.h +++ b/arch/mips/include/asm/branch.h @@ -27,6 +27,9 @@ extern int __MIPS16e_compute_return_epc(struct pt_regs *regs); #define MM_POOL32A_MINOR_SHIFT 0x6 #define MM_MIPS32_COND_FC 0x30 +int isBranchInstr(struct pt_regs *regs, + struct mm_decoded_insn dec_insn, unsigned long *contpc); + extern int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, unsigned long *contpc); diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h index 8031fbc6b69a..50253efecb56 100644 --- a/arch/mips/include/asm/cacheops.h +++ b/arch/mips/include/asm/cacheops.h @@ -48,7 +48,7 @@ * R4000-specific cacheops */ #define Create_Dirty_Excl_D (Cache_D | 0x0c) -#define Fill (Cache_I | 0x14) +#define Fill_I (Cache_I | 0x14) #define Hit_Writeback_I (Cache_I | Hit_Writeback) #define Hit_Writeback_D (Cache_D | Hit_Writeback) diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h deleted file mode 100644 index 5a8f96ebe5fa..000000000000 --- a/arch/mips/include/asm/clock.h +++ /dev/null @@ -1,49 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_MIPS_CLOCK_H -#define __ASM_MIPS_CLOCK_H - -#include <linux/kref.h> -#include <linux/list.h> -#include <linux/seq_file.h> -#include <linux/clk.h> - -struct clk; - -struct clk_ops { - void (*init) (struct clk *clk); - void (*enable) (struct clk *clk); - void (*disable) (struct clk *clk); - void (*recalc) (struct clk *clk); - int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id); - long (*round_rate) (struct clk *clk, unsigned long rate); -}; - -struct clk { - struct list_head node; - const char *name; - int id; - struct module *owner; - - struct clk *parent; - struct clk_ops *ops; - - struct kref kref; - - unsigned long rate; - unsigned long flags; -}; - -#define CLK_ALWAYS_ENABLED (1 << 0) -#define CLK_RATE_PROPAGATES (1 << 1) - -int clk_init(void); - -int __clk_enable(struct clk *); -void __clk_disable(struct clk *); - -void clk_recalc_rate(struct clk *); - -int clk_register(struct clk *); -void clk_unregister(struct clk *); - -#endif /* __ASM_MIPS_CLOCK_H */ diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h index f77e99f1722e..a2cb2d2b1c07 100644 --- a/arch/mips/include/asm/compiler.h +++ b/arch/mips/include/asm/compiler.h @@ -57,6 +57,11 @@ #define MIPS_ISA_ARCH_LEVEL MIPS_ISA_LEVEL #define MIPS_ISA_LEVEL_RAW mips64r6 #define MIPS_ISA_ARCH_LEVEL_RAW MIPS_ISA_LEVEL_RAW +#elif defined(CONFIG_CPU_MIPSR5) +#define MIPS_ISA_LEVEL "mips64r5" +#define MIPS_ISA_ARCH_LEVEL MIPS_ISA_LEVEL +#define MIPS_ISA_LEVEL_RAW mips64r5 +#define MIPS_ISA_ARCH_LEVEL_RAW MIPS_ISA_LEVEL_RAW #else /* MIPS64 is a superset of MIPS32 */ #define MIPS_ISA_LEVEL "mips64r2" diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index de44c92b1c1f..caecbae4b599 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -284,14 +284,23 @@ #ifndef cpu_has_mips32r2 # define cpu_has_mips32r2 __isa_range_or_flag(2, 6, MIPS_CPU_ISA_M32R2) #endif +#ifndef cpu_has_mips32r5 +# define cpu_has_mips32r5 __isa_range_or_flag(5, 6, MIPS_CPU_ISA_M32R5) +#endif #ifndef cpu_has_mips32r6 # define cpu_has_mips32r6 __isa_ge_or_flag(6, MIPS_CPU_ISA_M32R6) #endif #ifndef cpu_has_mips64r1 -# define cpu_has_mips64r1 __isa_range_or_flag(1, 6, MIPS_CPU_ISA_M64R1) +# define cpu_has_mips64r1 (cpu_has_64bits && \ + __isa_range_or_flag(1, 6, MIPS_CPU_ISA_M64R1)) #endif #ifndef cpu_has_mips64r2 -# define cpu_has_mips64r2 __isa_range_or_flag(2, 6, MIPS_CPU_ISA_M64R2) +# define cpu_has_mips64r2 (cpu_has_64bits && \ + __isa_range_or_flag(2, 6, MIPS_CPU_ISA_M64R2)) +#endif +#ifndef cpu_has_mips64r5 +# define cpu_has_mips64r5 (cpu_has_64bits && \ + __isa_range_or_flag(5, 6, MIPS_CPU_ISA_M64R5)) #endif #ifndef cpu_has_mips64r6 # define cpu_has_mips64r6 __isa_ge_and_flag(6, MIPS_CPU_ISA_M64R6) @@ -313,19 +322,25 @@ (cpu_has_mips_3 | cpu_has_mips_4_5_64_r2_r6) #define cpu_has_mips_4_5_64_r2_r6 \ (cpu_has_mips_4_5 | cpu_has_mips64r1 | \ - cpu_has_mips_r2 | cpu_has_mips_r6) + cpu_has_mips_r2 | cpu_has_mips_r5 | \ + cpu_has_mips_r6) -#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2 | cpu_has_mips32r6) -#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2 | cpu_has_mips64r6) +#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2 | \ + cpu_has_mips32r5 | cpu_has_mips32r6) +#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2 | \ + cpu_has_mips64r5 | cpu_has_mips64r6) #define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1) #define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2) +#define cpu_has_mips_r5 (cpu_has_mips32r5 | cpu_has_mips64r5) #define cpu_has_mips_r6 (cpu_has_mips32r6 | cpu_has_mips64r6) #define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \ - cpu_has_mips32r6 | cpu_has_mips64r1 | \ - cpu_has_mips64r2 | cpu_has_mips64r6) + cpu_has_mips32r5 | cpu_has_mips32r6 | \ + cpu_has_mips64r1 | cpu_has_mips64r2 | \ + cpu_has_mips64r5 | cpu_has_mips64r6) -/* MIPSR2 and MIPSR6 have a lot of similarities */ -#define cpu_has_mips_r2_r6 (cpu_has_mips_r2 | cpu_has_mips_r6) +/* MIPSR2 - MIPSR6 have a lot of similarities */ +#define cpu_has_mips_r2_r6 (cpu_has_mips_r2 | cpu_has_mips_r5 | \ + cpu_has_mips_r6) /* * cpu_has_mips_r2_exec_hazard - return if IHB is required on current processor @@ -435,9 +450,6 @@ # ifndef cpu_has_64bit_gp_regs # define cpu_has_64bit_gp_regs 0 # endif -# ifndef cpu_has_64bit_addresses -# define cpu_has_64bit_addresses 0 -# endif # ifndef cpu_vmbits # define cpu_vmbits 31 # endif @@ -456,9 +468,6 @@ # ifndef cpu_has_64bit_gp_regs # define cpu_has_64bit_gp_regs 1 # endif -# ifndef cpu_has_64bit_addresses -# define cpu_has_64bit_addresses 1 -# endif # ifndef cpu_vmbits # define cpu_vmbits cpu_data[0].vmbits # define __NEED_VMBITS_PROBE @@ -620,6 +629,14 @@ # endif #endif +#ifndef cpu_has_mm_sysad +# define cpu_has_mm_sysad __opt(MIPS_CPU_MM_SYSAD) +#endif + +#ifndef cpu_has_mm_full +# define cpu_has_mm_full __opt(MIPS_CPU_MM_FULL) +#endif + /* * Guest capabilities */ diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h index ed7ffe4e63a3..a600670d00e9 100644 --- a/arch/mips/include/asm/cpu-info.h +++ b/arch/mips/include/asm/cpu-info.h @@ -105,6 +105,15 @@ struct cpuinfo_mips { unsigned int gtoffset_mask; unsigned int guestid_mask; unsigned int guestid_cache; + +#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION + /* CPUCFG data for this CPU, synthesized at probe time. + * + * CPUCFG select 0 is PRId, 4 and above are unimplemented for now. + * So the only stored values are for CPUCFG selects 1-3 inclusive. + */ + u32 loongson3_cpucfg_data[3]; +#endif } __attribute__((aligned(SMP_CACHE_BYTES))); extern struct cpuinfo_mips cpu_data[]; @@ -142,7 +151,7 @@ struct proc_cpuinfo_notifier_args { static inline unsigned int cpu_cluster(struct cpuinfo_mips *cpuinfo) { /* Optimisation for systems where multiple clusters aren't used */ - if (!IS_ENABLED(CONFIG_CPU_MIPSR6)) + if (!IS_ENABLED(CONFIG_CPU_MIPSR5) && !IS_ENABLED(CONFIG_CPU_MIPSR6)) return 0; return (cpuinfo->globalnumber & MIPS_GLOBALNUMBER_CLUSTER) >> diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h index 49f0061a6051..75a7a382da09 100644 --- a/arch/mips/include/asm/cpu-type.h +++ b/arch/mips/include/asm/cpu-type.h @@ -51,13 +51,18 @@ static inline int __pure __get_cpu_type(const int cpu_type) case CPU_M14KEC: case CPU_INTERAPTIV: case CPU_PROAPTIV: - case CPU_P5600: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R5 case CPU_M5150: + case CPU_P5600: #endif #if defined(CONFIG_SYS_HAS_CPU_MIPS32_R2) || \ + defined(CONFIG_SYS_HAS_CPU_MIPS32_R5) || \ defined(CONFIG_SYS_HAS_CPU_MIPS32_R6) || \ defined(CONFIG_SYS_HAS_CPU_MIPS64_R2) || \ + defined(CONFIG_SYS_HAS_CPU_MIPS64_R5) || \ defined(CONFIG_SYS_HAS_CPU_MIPS64_R6) case CPU_QEMU_GENERIC: #endif diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 216a22916740..104a509312b3 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -250,6 +250,10 @@ #define PRID_REV_LOONGSON1C 0x0020 /* Same as Loongson-1B */ #define PRID_REV_LOONGSON2E 0x0002 #define PRID_REV_LOONGSON2F 0x0003 +#define PRID_REV_LOONGSON2K_R1_0 0x0000 +#define PRID_REV_LOONGSON2K_R1_1 0x0001 +#define PRID_REV_LOONGSON2K_R1_2 0x0002 +#define PRID_REV_LOONGSON2K_R1_3 0x0003 #define PRID_REV_LOONGSON3A_R1 0x0005 #define PRID_REV_LOONGSON3B_R1 0x0006 #define PRID_REV_LOONGSON3B_R2 0x0007 @@ -343,14 +347,16 @@ enum cpu_type_enum { #define MIPS_CPU_ISA_M32R2 0x00000020 #define MIPS_CPU_ISA_M64R1 0x00000040 #define MIPS_CPU_ISA_M64R2 0x00000080 -#define MIPS_CPU_ISA_M32R6 0x00000100 -#define MIPS_CPU_ISA_M64R6 0x00000200 +#define MIPS_CPU_ISA_M32R5 0x00000100 +#define MIPS_CPU_ISA_M64R5 0x00000200 +#define MIPS_CPU_ISA_M32R6 0x00000400 +#define MIPS_CPU_ISA_M64R6 0x00000800 #define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_II | MIPS_CPU_ISA_M32R1 | \ - MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M32R6) + MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M32R6) #define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \ MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2 | \ - MIPS_CPU_ISA_M64R6) + MIPS_CPU_ISA_M64R5 | MIPS_CPU_ISA_M64R6) /* * CPU Option encodings @@ -416,7 +422,9 @@ enum cpu_type_enum { #define MIPS_CPU_MT_PER_TC_PERF_COUNTERS \ BIT_ULL(56) /* CPU has perf counters implemented per TC (MIPSMT ASE) */ #define MIPS_CPU_MMID BIT_ULL(57) /* CPU supports MemoryMapIDs */ -#define MIPS_CPU_MAC_2008_ONLY BIT_ULL(58) /* CPU Only support MAC2008 Fused multiply-add instruction */ +#define MIPS_CPU_MM_SYSAD BIT_ULL(58) /* CPU supports write-through SysAD Valid merge */ +#define MIPS_CPU_MM_FULL BIT_ULL(59) /* CPU supports write-through full merge */ +#define MIPS_CPU_MAC_2008_ONLY BIT_ULL(60) /* CPU Only support MAC2008 Fused multiply-add instruction */ /* * CPU ASE encodings diff --git a/arch/mips/include/asm/emma/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h deleted file mode 100644 index a25cdb378fe8..000000000000 --- a/arch/mips/include/asm/emma/emma2rh.h +++ /dev/null @@ -1,248 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) NEC Electronics Corporation 2005-2006 - * - * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h - * Copyright 2001 MontaVista Software Inc. - */ -#ifndef __ASM_EMMA_EMMA2RH_H -#define __ASM_EMMA_EMMA2RH_H - -#include <irq.h> - -/* - * EMMA2RH registers - */ -#define REGBASE 0x10000000 - -#define EMMA2RH_BHIF_STRAP_0 (0x000010+REGBASE) -#define EMMA2RH_BHIF_INT_ST_0 (0x000030+REGBASE) -#define EMMA2RH_BHIF_INT_ST_1 (0x000034+REGBASE) -#define EMMA2RH_BHIF_INT_ST_2 (0x000038+REGBASE) -#define EMMA2RH_BHIF_INT_EN_0 (0x000040+REGBASE) -#define EMMA2RH_BHIF_INT_EN_1 (0x000044+REGBASE) -#define EMMA2RH_BHIF_INT_EN_2 (0x000048+REGBASE) -#define EMMA2RH_BHIF_INT1_EN_0 (0x000050+REGBASE) -#define EMMA2RH_BHIF_INT1_EN_1 (0x000054+REGBASE) -#define EMMA2RH_BHIF_INT1_EN_2 (0x000058+REGBASE) -#define EMMA2RH_BHIF_SW_INT (0x000070+REGBASE) -#define EMMA2RH_BHIF_SW_INT_EN (0x000080+REGBASE) -#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE) -#define EMMA2RH_BHIF_MAIN_CTRL (0x0000b4+REGBASE) -#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS (0x0000c0+REGBASE) -#define EMMA2RH_GPIO_DIR (0x110d20+REGBASE) -#define EMMA2RH_GPIO_INT_ST (0x110d30+REGBASE) -#define EMMA2RH_GPIO_INT_MASK (0x110d3c+REGBASE) -#define EMMA2RH_GPIO_INT_MODE (0x110d48+REGBASE) -#define EMMA2RH_GPIO_INT_CND_A (0x110d54+REGBASE) -#define EMMA2RH_GPIO_INT_CND_B (0x110d60+REGBASE) -#define EMMA2RH_PBRD_INT_EN (0x100010+REGBASE) -#define EMMA2RH_PBRD_CLKSEL (0x100028+REGBASE) -#define EMMA2RH_PFUR0_BASE (0x101000+REGBASE) -#define EMMA2RH_PFUR1_BASE (0x102000+REGBASE) -#define EMMA2RH_PFUR2_BASE (0x103000+REGBASE) -#define EMMA2RH_PIIC0_BASE (0x107000+REGBASE) -#define EMMA2RH_PIIC1_BASE (0x108000+REGBASE) -#define EMMA2RH_PIIC2_BASE (0x109000+REGBASE) -#define EMMA2RH_PCI_CONTROL (0x200000+REGBASE) -#define EMMA2RH_PCI_ARBIT_CTR (0x200004+REGBASE) -#define EMMA2RH_PCI_IWIN0_CTR (0x200010+REGBASE) -#define EMMA2RH_PCI_IWIN1_CTR (0x200014+REGBASE) -#define EMMA2RH_PCI_INIT_ESWP (0x200018+REGBASE) -#define EMMA2RH_PCI_INT (0x200020+REGBASE) -#define EMMA2RH_PCI_INT_EN (0x200024+REGBASE) -#define EMMA2RH_PCI_TWIN_CTR (0x200030+REGBASE) -#define EMMA2RH_PCI_TWIN_BADR (0x200034+REGBASE) -#define EMMA2RH_PCI_TWIN0_DADR (0x200038+REGBASE) -#define EMMA2RH_PCI_TWIN1_DADR (0x20003c+REGBASE) - -/* - * Memory map (physical address) - * - * Note most of the following address must be properly aligned by the - * corresponding size. For example, if PCI_IO_SIZE is 16MB, then - * PCI_IO_BASE must be aligned along 16MB boundary. - */ - -/* the actual ram size is detected at run-time */ -#define EMMA2RH_RAM_BASE 0x00000000 -#define EMMA2RH_RAM_SIZE 0x10000000 /* less than 256MB */ - -#define EMMA2RH_IO_BASE 0x10000000 -#define EMMA2RH_IO_SIZE 0x01000000 /* 16 MB */ - -#define EMMA2RH_GENERALIO_BASE 0x11000000 -#define EMMA2RH_GENERALIO_SIZE 0x01000000 /* 16 MB */ - -#define EMMA2RH_PCI_IO_BASE 0x12000000 -#define EMMA2RH_PCI_IO_SIZE 0x02000000 /* 32 MB */ - -#define EMMA2RH_PCI_MEM_BASE 0x14000000 -#define EMMA2RH_PCI_MEM_SIZE 0x08000000 /* 128 MB */ - -#define EMMA2RH_ROM_BASE 0x1c000000 -#define EMMA2RH_ROM_SIZE 0x04000000 /* 64 MB */ - -#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE -#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE - -#define NUM_EMMA2RH_IRQ 96 - -#define EMMA2RH_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) - -/* - * emma2rh irq defs - */ - -#define EMMA2RH_IRQ_INT(n) (EMMA2RH_IRQ_BASE + (n)) - -#define EMMA2RH_IRQ_PFUR0 EMMA2RH_IRQ_INT(49) -#define EMMA2RH_IRQ_PFUR1 EMMA2RH_IRQ_INT(50) -#define EMMA2RH_IRQ_PFUR2 EMMA2RH_IRQ_INT(51) -#define EMMA2RH_IRQ_PIIC0 EMMA2RH_IRQ_INT(56) -#define EMMA2RH_IRQ_PIIC1 EMMA2RH_IRQ_INT(57) -#define EMMA2RH_IRQ_PIIC2 EMMA2RH_IRQ_INT(58) - -/* - * EMMA2RH Register Access - */ - -#define EMMA2RH_BASE (0xa0000000) - -static inline void emma2rh_sync(void) -{ - volatile u32 *p = (volatile u32 *)0xbfc00000; - (void)(*p); -} - -static inline void emma2rh_out32(u32 offset, u32 val) -{ - *(volatile u32 *)(EMMA2RH_BASE | offset) = val; - emma2rh_sync(); -} - -static inline u32 emma2rh_in32(u32 offset) -{ - u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset); - return val; -} - -static inline void emma2rh_out16(u32 offset, u16 val) -{ - *(volatile u16 *)(EMMA2RH_BASE | offset) = val; - emma2rh_sync(); -} - -static inline u16 emma2rh_in16(u32 offset) -{ - u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset); - return val; -} - -static inline void emma2rh_out8(u32 offset, u8 val) -{ - *(volatile u8 *)(EMMA2RH_BASE | offset) = val; - emma2rh_sync(); -} - -static inline u8 emma2rh_in8(u32 offset) -{ - u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset); - return val; -} - -/** - * IIC registers map - **/ - -/*---------------------------------------------------------------------------*/ -/* CNT - Control register (00H R/W) */ -/*---------------------------------------------------------------------------*/ -#define SPT 0x00000001 -#define STT 0x00000002 -#define ACKE 0x00000004 -#define WTIM 0x00000008 -#define SPIE 0x00000010 -#define WREL 0x00000020 -#define LREL 0x00000040 -#define IICE 0x00000080 -#define CNT_RESERVED 0x000000ff /* reserved bit 0 */ - -#define I2C_EMMA_START (IICE | STT) -#define I2C_EMMA_STOP (IICE | SPT) -#define I2C_EMMA_REPSTART I2C_EMMA_START - -/*---------------------------------------------------------------------------*/ -/* STA - Status register (10H Read) */ -/*---------------------------------------------------------------------------*/ -#define MSTS 0x00000080 -#define ALD 0x00000040 -#define EXC 0x00000020 -#define COI 0x00000010 -#define TRC 0x00000008 -#define ACKD 0x00000004 -#define STD 0x00000002 -#define SPD 0x00000001 - -/*---------------------------------------------------------------------------*/ -/* CSEL - Clock select register (20H R/W) */ -/*---------------------------------------------------------------------------*/ -#define FCL 0x00000080 -#define ND50 0x00000040 -#define CLD 0x00000020 -#define DAD 0x00000010 -#define SMC 0x00000008 -#define DFC 0x00000004 -#define CL 0x00000003 -#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */ - -#define FAST397 0x0000008b -#define FAST297 0x0000008a -#define FAST347 0x0000000b -#define FAST260 0x0000000a -#define FAST130 0x00000008 -#define STANDARD108 0x00000083 -#define STANDARD83 0x00000082 -#define STANDARD95 0x00000003 -#define STANDARD73 0x00000002 -#define STANDARD36 0x00000001 -#define STANDARD71 0x00000000 - -/*---------------------------------------------------------------------------*/ -/* SVA - Slave address register (30H R/W) */ -/*---------------------------------------------------------------------------*/ -#define SVA 0x000000fe - -/*---------------------------------------------------------------------------*/ -/* SHR - Shift register (40H R/W) */ -/*---------------------------------------------------------------------------*/ -#define SR 0x000000ff - -/*---------------------------------------------------------------------------*/ -/* INT - Interrupt register (50H R/W) */ -/* INTM - Interrupt mask register (60H R/W) */ -/*---------------------------------------------------------------------------*/ -#define INTE0 0x00000001 - -/*********************************************************************** - * I2C registers - *********************************************************************** - */ -#define I2C_EMMA_CNT 0x00 -#define I2C_EMMA_STA 0x10 -#define I2C_EMMA_CSEL 0x20 -#define I2C_EMMA_SVA 0x30 -#define I2C_EMMA_SHR 0x40 -#define I2C_EMMA_INT 0x50 -#define I2C_EMMA_INTM 0x60 - -/* - * include the board dependent part - */ -#ifdef CONFIG_NEC_MARKEINS -#include <asm/emma/markeins.h> -#else -#error "Unknown EMMA2RH board!" -#endif - -#endif /* __ASM_EMMA_EMMA2RH_H */ diff --git a/arch/mips/include/asm/emma/markeins.h b/arch/mips/include/asm/emma/markeins.h deleted file mode 100644 index 2d7e1339d36f..000000000000 --- a/arch/mips/include/asm/emma/markeins.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) NEC Electronics Corporation 2005-2006 - * - * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h - * Copyright 2001 MontaVista Software Inc. - */ - -#ifndef MARKEINS_H -#define MARKEINS_H - -#define NUM_EMMA2RH_IRQ_SW 32 -#define NUM_EMMA2RH_IRQ_GPIO 32 - -#define EMMA2RH_SW_CASCADE (EMMA2RH_IRQ_INT(7) - EMMA2RH_IRQ_INT(0)) -#define EMMA2RH_GPIO_CASCADE (EMMA2RH_IRQ_INT(46) - EMMA2RH_IRQ_INT(0)) - -#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ) -#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW) - -#define EMMA2RH_SW_IRQ_INT(n) (EMMA2RH_SW_IRQ_BASE + (n)) - -#define MARKEINS_PCI_IRQ_INTA EMMA2RH_GPIO_IRQ_BASE+15 -#define MARKEINS_PCI_IRQ_INTB EMMA2RH_GPIO_IRQ_BASE+16 -#define MARKEINS_PCI_IRQ_INTC EMMA2RH_GPIO_IRQ_BASE+17 -#define MARKEINS_PCI_IRQ_INTD EMMA2RH_GPIO_IRQ_BASE+18 - -#endif /* CONFIG_MARKEINS */ diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index 9476e0498d59..08f9dd6903b7 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -71,12 +71,12 @@ static inline int __enable_fpu(enum fpu_mode mode) goto fr_common; case FPU_64BIT: -#if !(defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) \ - || defined(CONFIG_64BIT)) +#if !(defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ + defined(CONFIG_CPU_MIPSR6) || defined(CONFIG_64BIT)) /* we only have a 32-bit FPU */ return SIGFPE; #endif - /* fall through */ + fallthrough; case FPU_32BIT: if (cpu_has_fre) { /* clear FRE */ diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h index bb7c71ffe5b7..f67759e81210 100644 --- a/arch/mips/include/asm/fpu_emulator.h +++ b/arch/mips/include/asm/fpu_emulator.h @@ -172,10 +172,6 @@ void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr, struct task_struct *tsk); int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31); -int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, - unsigned long *contpc); -int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, - unsigned long *contpc); /* * Mask the FCSR Cause bits according to the Enable bits, observing diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index a0b92205f933..f855478d12fa 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -22,8 +22,9 @@ /* * TLB hazards */ -#if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)) && \ - !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64) +#if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ + defined(CONFIG_CPU_MIPSR6)) && \ + !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64) /* * MIPSR2 defines ehb for hazard avoidance @@ -278,7 +279,8 @@ do { \ #define __disable_fpu_hazard -#elif defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) +#elif defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ + defined(CONFIG_CPU_MIPSR6) #define __enable_fpu_hazard \ ___ehb diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index cf1f2a4a2418..346fffd9e972 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -30,8 +30,6 @@ #include <asm/pgtable-bits.h> #include <asm/processor.h> #include <asm/string.h> - -#include <ioremap.h> #include <mangle-port.h> /* @@ -153,66 +151,9 @@ static inline void *isa_bus_to_virt(unsigned long address) */ #define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) -extern void __iomem * __ioremap(phys_addr_t offset, phys_addr_t size, unsigned long flags); -extern void __iounmap(const volatile void __iomem *addr); - -static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long size, - unsigned long flags) -{ - void __iomem *addr = plat_ioremap(offset, size, flags); - - if (addr) - return addr; - -#define __IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL)) - - if (cpu_has_64bit_addresses) { - u64 base = UNCAC_BASE; - - /* - * R10000 supports a 2 bit uncached attribute therefore - * UNCAC_BASE may not equal IO_BASE. - */ - if (flags == _CACHE_UNCACHED) - base = (u64) IO_BASE; - return (void __iomem *) (unsigned long) (base + offset); - } else if (__builtin_constant_p(offset) && - __builtin_constant_p(size) && __builtin_constant_p(flags)) { - phys_addr_t phys_addr, last_addr; - - phys_addr = fixup_bigphys_addr(offset, size); - - /* Don't allow wraparound or zero size. */ - last_addr = phys_addr + size - 1; - if (!size || last_addr < phys_addr) - return NULL; - - /* - * Map uncached objects in the low 512MB of address - * space using KSEG1. - */ - if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) && - flags == _CACHE_UNCACHED) - return (void __iomem *) - (unsigned long)CKSEG1ADDR(phys_addr); - } - - return __ioremap(offset, size, flags); - -#undef __IS_LOW512 -} - -/* - * ioremap_prot - map bus memory into CPU space - * @offset: bus address of the memory - * @size: size of the resource to map - - * ioremap_prot gives the caller control over cache coherency attributes (CCA) - */ -static inline void __iomem *ioremap_prot(phys_addr_t offset, - unsigned long size, unsigned long prot_val) { - return __ioremap_mode(offset, size, prot_val & _CACHE_MASK); -} +void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size, + unsigned long prot_val); +void iounmap(const volatile void __iomem *addr); /* * ioremap - map bus memory into CPU space @@ -226,7 +167,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset, * address. */ #define ioremap(offset, size) \ - __ioremap_mode((offset), (size), _CACHE_UNCACHED) + ioremap_prot((offset), (size), _CACHE_UNCACHED) #define ioremap_uc ioremap /* @@ -245,7 +186,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset, * memory-like regions on I/O busses. */ #define ioremap_cache(offset, size) \ - __ioremap_mode((offset), (size), _page_cachable_default) + ioremap_prot((offset), (size), _page_cachable_default) /* * ioremap_wc - map bus memory into CPU space @@ -266,23 +207,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset, * _CACHE_UNCACHED option (see cpu_probe() method). */ #define ioremap_wc(offset, size) \ - __ioremap_mode((offset), (size), boot_cpu_data.writecombine) - -static inline void iounmap(const volatile void __iomem *addr) -{ - if (plat_iounmap(addr)) - return; - -#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1) - - if (cpu_has_64bit_addresses || - (__builtin_constant_p(addr) && __IS_KSEG1(addr))) - return; - - __iounmap(addr); - -#undef __IS_KSEG1 -} + ioremap_prot((offset), (size), boot_cpu_data.writecombine) #if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64) #define war_io_reorder_wmb() wmb() diff --git a/arch/mips/include/asm/lasat/ds1603.h b/arch/mips/include/asm/lasat/ds1603.h deleted file mode 100644 index ab833be9637d..000000000000 --- a/arch/mips/include/asm/lasat/ds1603.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <asm/addrspace.h> - -/* Lasat 100 */ -#define DS1603_REG_100 (KSEG1ADDR(0x1c810000)) -#define DS1603_RST_100 (1 << 2) -#define DS1603_CLK_100 (1 << 0) -#define DS1603_DATA_SHIFT_100 1 -#define DS1603_DATA_100 (1 << DS1603_DATA_SHIFT_100) - -/* Lasat 200 */ -#define DS1603_REG_200 (KSEG1ADDR(0x11000000)) -#define DS1603_RST_200 (1 << 3) -#define DS1603_CLK_200 (1 << 4) -#define DS1603_DATA_200 (1 << 5) - -#define DS1603_DATA_REG_200 (DS1603_REG_200 + 0x10000) -#define DS1603_DATA_READ_SHIFT_200 9 -#define DS1603_DATA_READ_200 (1 << DS1603_DATA_READ_SHIFT_200) diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h deleted file mode 100644 index 24001a5cbb11..000000000000 --- a/arch/mips/include/asm/lasat/eeprom.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <asm/addrspace.h> - -/* lasat 100 */ -#define AT93C_REG_100 KSEG1ADDR(0x1c810000) -#define AT93C_RDATA_REG_100 AT93C_REG_100 -#define AT93C_RDATA_SHIFT_100 4 -#define AT93C_WDATA_SHIFT_100 4 -#define AT93C_CS_M_100 (1 << 5) -#define AT93C_CLK_M_100 (1 << 3) - -/* lasat 200 */ -#define AT93C_REG_200 KSEG1ADDR(0x11000000) -#define AT93C_RDATA_REG_200 (AT93C_REG_200+0x10000) -#define AT93C_RDATA_SHIFT_200 8 -#define AT93C_WDATA_SHIFT_200 2 -#define AT93C_CS_M_200 (1 << 0) -#define AT93C_CLK_M_200 (1 << 1) diff --git a/arch/mips/include/asm/lasat/head.h b/arch/mips/include/asm/lasat/head.h deleted file mode 100644 index 20b0ecedd4b5..000000000000 --- a/arch/mips/include/asm/lasat/head.h +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Image header stuff - */ -#ifndef _HEAD_H -#define _HEAD_H - -#define LASAT_K_MAGIC0_VAL 0xfedeabba -#define LASAT_K_MAGIC1_VAL 0x00bedead - -#ifndef _LANGUAGE_ASSEMBLY -#include <linux/types.h> -struct bootloader_header { - u32 magic[2]; - u32 version; - u32 image_start; - u32 image_size; - u32 kernel_start; - u32 kernel_entry; -}; -#endif - -#endif /* _HEAD_H */ diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h deleted file mode 100644 index 483be606960d..000000000000 --- a/arch/mips/include/asm/lasat/lasat.h +++ /dev/null @@ -1,245 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * lasat.h - * - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * Configuration for LASAT boards, loads the appropriate include files. - */ -#ifndef _LASAT_H -#define _LASAT_H - -#ifndef _LANGUAGE_ASSEMBLY - -extern struct lasat_misc { - volatile u32 *reset_reg; - volatile u32 *flash_wp_reg; - u32 flash_wp_bit; -} *lasat_misc; - -enum lasat_mtdparts { - LASAT_MTD_BOOTLOADER, - LASAT_MTD_SERVICE, - LASAT_MTD_NORMAL, - LASAT_MTD_CONFIG, - LASAT_MTD_FS, - LASAT_MTD_LAST -}; - -/* - * The format of the data record in the EEPROM. - * See the LASAT Hardware Configuration field specification for a detailed - * description of the config field. - */ -#include <linux/types.h> - -#define LASAT_EEPROM_VERSION 7 -struct lasat_eeprom_struct { - unsigned int version; - unsigned int cfg[3]; - unsigned char hwaddr[6]; - unsigned char print_partno[12]; - unsigned char term0; - unsigned char print_serial[14]; - unsigned char term1; - unsigned char prod_partno[12]; - unsigned char term2; - unsigned char prod_serial[14]; - unsigned char term3; - unsigned char passwd_hash[16]; - unsigned char pwdnull; - unsigned char vendid; - unsigned char ts_ref; - unsigned char ts_signoff; - unsigned char reserved[11]; - unsigned char debugaccess; - unsigned short prid; - unsigned int serviceflag; - unsigned int ipaddr; - unsigned int netmask; - unsigned int crc32; -}; - -struct lasat_eeprom_struct_pre7 { - unsigned int version; - unsigned int flags[3]; - unsigned char hwaddr0[6]; - unsigned char hwaddr1[6]; - unsigned char print_partno[9]; - unsigned char term0; - unsigned char print_serial[14]; - unsigned char term1; - unsigned char prod_partno[9]; - unsigned char term2; - unsigned char prod_serial[14]; - unsigned char term3; - unsigned char passwd_hash[24]; - unsigned char pwdnull; - unsigned char vendor; - unsigned char ts_ref; - unsigned char ts_signoff; - unsigned char reserved[6]; - unsigned int writecount; - unsigned int ipaddr; - unsigned int netmask; - unsigned int crc32; -}; - -/* Configuration descriptor encoding - see the doc for details */ - -#define LASAT_W0_DSCTYPE(v) (((v)) & 0xf) -#define LASAT_W0_BMID(v) (((v) >> 0x04) & 0xf) -#define LASAT_W0_CPUTYPE(v) (((v) >> 0x08) & 0xf) -#define LASAT_W0_BUSSPEED(v) (((v) >> 0x0c) & 0xf) -#define LASAT_W0_CPUCLK(v) (((v) >> 0x10) & 0xf) -#define LASAT_W0_SDRAMBANKSZ(v) (((v) >> 0x14) & 0xf) -#define LASAT_W0_SDRAMBANKS(v) (((v) >> 0x18) & 0xf) -#define LASAT_W0_L2CACHE(v) (((v) >> 0x1c) & 0xf) - -#define LASAT_W1_EDHAC(v) (((v)) & 0xf) -#define LASAT_W1_HIFN(v) (((v) >> 0x04) & 0x1) -#define LASAT_W1_ISDN(v) (((v) >> 0x05) & 0x1) -#define LASAT_W1_IDE(v) (((v) >> 0x06) & 0x1) -#define LASAT_W1_HDLC(v) (((v) >> 0x07) & 0x1) -#define LASAT_W1_USVERSION(v) (((v) >> 0x08) & 0x1) -#define LASAT_W1_4MACS(v) (((v) >> 0x09) & 0x1) -#define LASAT_W1_EXTSERIAL(v) (((v) >> 0x0a) & 0x1) -#define LASAT_W1_FLASHSIZE(v) (((v) >> 0x0c) & 0xf) -#define LASAT_W1_PCISLOTS(v) (((v) >> 0x10) & 0xf) -#define LASAT_W1_PCI1OPT(v) (((v) >> 0x14) & 0xf) -#define LASAT_W1_PCI2OPT(v) (((v) >> 0x18) & 0xf) -#define LASAT_W1_PCI3OPT(v) (((v) >> 0x1c) & 0xf) - -/* Routines specific to LASAT boards */ - -#define LASAT_BMID_MASQUERADE2 0 -#define LASAT_BMID_MASQUERADEPRO 1 -#define LASAT_BMID_SAFEPIPE25 2 -#define LASAT_BMID_SAFEPIPE50 3 -#define LASAT_BMID_SAFEPIPE100 4 -#define LASAT_BMID_SAFEPIPE5000 5 -#define LASAT_BMID_SAFEPIPE7000 6 -#define LASAT_BMID_SAFEPIPE1000 7 -#if 0 -#define LASAT_BMID_SAFEPIPE30 7 -#define LASAT_BMID_SAFEPIPE5100 8 -#define LASAT_BMID_SAFEPIPE7100 9 -#endif -#define LASAT_BMID_UNKNOWN 0xf -#define LASAT_MAX_BMID_NAMES 9 /* no larger than 15! */ - -#define LASAT_HAS_EDHAC (1 << 0) -#define LASAT_EDHAC_FAST (1 << 1) -#define LASAT_HAS_EADI (1 << 2) -#define LASAT_HAS_HIFN (1 << 3) -#define LASAT_HAS_ISDN (1 << 4) -#define LASAT_HAS_LEASEDLINE_IF (1 << 5) -#define LASAT_HAS_HDC (1 << 6) - -#define LASAT_PRID_MASQUERADE2 0 -#define LASAT_PRID_MASQUERADEPRO 1 -#define LASAT_PRID_SAFEPIPE25 2 -#define LASAT_PRID_SAFEPIPE50 3 -#define LASAT_PRID_SAFEPIPE100 4 -#define LASAT_PRID_SAFEPIPE5000 5 -#define LASAT_PRID_SAFEPIPE7000 6 -#define LASAT_PRID_SAFEPIPE30 7 -#define LASAT_PRID_SAFEPIPE5100 8 -#define LASAT_PRID_SAFEPIPE7100 9 - -#define LASAT_PRID_SAFEPIPE1110 10 -#define LASAT_PRID_SAFEPIPE3020 11 -#define LASAT_PRID_SAFEPIPE3030 12 -#define LASAT_PRID_SAFEPIPE5020 13 -#define LASAT_PRID_SAFEPIPE5030 14 -#define LASAT_PRID_SAFEPIPE1120 15 -#define LASAT_PRID_SAFEPIPE1130 16 -#define LASAT_PRID_SAFEPIPE6010 17 -#define LASAT_PRID_SAFEPIPE6110 18 -#define LASAT_PRID_SAFEPIPE6210 19 -#define LASAT_PRID_SAFEPIPE1020 20 -#define LASAT_PRID_SAFEPIPE1040 21 -#define LASAT_PRID_SAFEPIPE1060 22 - -struct lasat_info { - unsigned int li_cpu_hz; - unsigned int li_bus_hz; - unsigned int li_bmid; - unsigned int li_memsize; - unsigned int li_flash_size; - unsigned int li_prid; - unsigned char li_bmstr[16]; - unsigned char li_namestr[32]; - unsigned char li_typestr[16]; - /* Info on the Flash layout */ - unsigned int li_flash_base; - unsigned long li_flashpart_base[LASAT_MTD_LAST]; - unsigned long li_flashpart_size[LASAT_MTD_LAST]; - struct lasat_eeprom_struct li_eeprom_info; - unsigned int li_eeprom_upgrade_version; - unsigned int li_debugaccess; -}; - -extern struct lasat_info lasat_board_info; - -static inline unsigned long lasat_flash_partition_start(int partno) -{ - if (partno < 0 || partno >= LASAT_MTD_LAST) - return 0; - - return lasat_board_info.li_flashpart_base[partno]; -} - -static inline unsigned long lasat_flash_partition_size(int partno) -{ - if (partno < 0 || partno >= LASAT_MTD_LAST) - return 0; - - return lasat_board_info.li_flashpart_size[partno]; -} - -/* Called from setup() to initialize the global board_info struct */ -extern int lasat_init_board_info(void); - -/* Write the modified EEPROM info struct */ -extern void lasat_write_eeprom_info(void); - -#define N_MACHTYPES 2 -/* for calibration of delays */ - -/* the lasat_ndelay function is necessary because it is used at an - * early stage of the boot process where ndelay is not calibrated. - * It is used for the bit-banging rtc and eeprom drivers */ - -#include <linux/delay.h> -#include <linux/smp.h> - -/* calculating with the slowest board with 100 MHz clock */ -#define LASAT_100_DIVIDER 20 -/* All 200's run at 250 MHz clock */ -#define LASAT_200_DIVIDER 8 - -extern unsigned int lasat_ndelay_divider; - -static inline void lasat_ndelay(unsigned int ns) -{ - __delay(ns / lasat_ndelay_divider); -} - -#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000) - -#endif /* !defined (_LANGUAGE_ASSEMBLY) */ - -#define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef -#define LASAT_SERVICEMODE_MAGIC_2 0xfedeabba - -/* Lasat 100 boards */ -#define LASAT_GT_BASE (KSEG1ADDR(0x14000000)) - -/* Lasat 200 boards */ -#define Vrc5074_PHYS_BASE 0x1fa00000 -#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE)) -#define PCI_WINDOW1 0x1a000000 - -#endif /* _LASAT_H */ diff --git a/arch/mips/include/asm/lasat/lasatint.h b/arch/mips/include/asm/lasat/lasatint.h deleted file mode 100644 index b2b346e0ca38..000000000000 --- a/arch/mips/include/asm/lasat/lasatint.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_LASAT_LASATINT_H -#define __ASM_LASAT_LASATINT_H - -/* lasat 100 */ -#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000)) -#define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000)) -#define LASATINT_MASK_SHIFT_100 0 - -/* lasat 200 */ -#define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c)) -#define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c)) -#define LASATINT_MASK_SHIFT_200 16 - -#endif /* __ASM_LASAT_LASATINT_H */ diff --git a/arch/mips/include/asm/lasat/picvue.h b/arch/mips/include/asm/lasat/picvue.h deleted file mode 100644 index 99987c5a4b83..000000000000 --- a/arch/mips/include/asm/lasat/picvue.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Lasat 100 */ -#define PVC_REG_100 KSEG1ADDR(0x1c820000) -#define PVC_DATA_SHIFT_100 0 -#define PVC_DATA_M_100 0xFF -#define PVC_E_100 (1 << 8) -#define PVC_RW_100 (1 << 9) -#define PVC_RS_100 (1 << 10) - -/* Lasat 200 */ -#define PVC_REG_200 KSEG1ADDR(0x11000000) -#define PVC_DATA_SHIFT_200 24 -#define PVC_DATA_M_200 (0xFF << PVC_DATA_SHIFT_200) -#define PVC_E_200 (1 << 16) -#define PVC_RW_200 (1 << 17) -#define PVC_RS_200 (1 << 18) diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h deleted file mode 100644 index 7b43d74089d1..000000000000 --- a/arch/mips/include/asm/lasat/serial.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <asm/lasat/lasat.h> - -/* Lasat 100 boards serial configuration */ -#define LASAT_BASE_BAUD_100 (7372800 / 16) -#define LASAT_UART_REGS_BASE_100 0x1c8b0000 -#define LASAT_UART_REGS_SHIFT_100 2 -#define LASATINT_UART_100 16 - -/* * LASAT 200 boards serial configuration */ -#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) -#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300) -#define LASAT_UART_REGS_SHIFT_200 3 -#define LASATINT_UART_200 21 diff --git a/arch/mips/include/asm/maar.h b/arch/mips/include/asm/maar.h index 6908b93c4ff9..99f1c3e4b11f 100644 --- a/arch/mips/include/asm/maar.h +++ b/arch/mips/include/asm/maar.h @@ -32,7 +32,7 @@ unsigned platform_maar_init(unsigned num_pairs); * @upper: The highest address that the MAAR pair will affect. Must be * aligned to one byte before a 2^16 byte boundary. * @attrs: The accessibility attributes to program, eg. MIPS_MAAR_S. The - * MIPS_MAAR_VL attribute will automatically be set. + * MIPS_MAAR_VL/MIPS_MAAR_VH attributes will automatically be set. * * Program the pair of MAAR registers specified by idx to apply the attributes * specified by attrs to the range of addresses from lower to higher. @@ -48,17 +48,30 @@ static inline void write_maar_pair(unsigned idx, phys_addr_t lower, /* Automatically set MIPS_MAAR_VL */ attrs |= MIPS_MAAR_VL; - /* Write the upper address & attributes (only MIPS_MAAR_VL matters) */ + /* + * Write the upper address & attributes (both MIPS_MAAR_VL and + * MIPS_MAAR_VH matter) + */ write_c0_maari(idx << 1); back_to_back_c0_hazard(); write_c0_maar(((upper >> 4) & MIPS_MAAR_ADDR) | attrs); back_to_back_c0_hazard(); +#ifdef CONFIG_XPA + upper >>= MIPS_MAARX_ADDR_SHIFT; + writex_c0_maar(((upper >> 4) & MIPS_MAARX_ADDR) | MIPS_MAARX_VH); + back_to_back_c0_hazard(); +#endif /* Write the lower address & attributes */ write_c0_maari((idx << 1) | 0x1); back_to_back_c0_hazard(); write_c0_maar((lower >> 4) | attrs); back_to_back_c0_hazard(); +#ifdef CONFIG_XPA + lower >>= MIPS_MAARX_ADDR_SHIFT; + writex_c0_maar(((lower >> 4) & MIPS_MAARX_ADDR) | MIPS_MAARX_VH); + back_to_back_c0_hazard(); +#endif } /** diff --git a/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h index 95a0b580909d..a54f20d956a2 100644 --- a/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h @@ -56,6 +56,5 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 #endif /* __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h index e7c972fccd9f..79ab3ad9fee8 100644 --- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h @@ -45,7 +45,6 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h deleted file mode 100644 index f6877ed8b8d0..000000000000 --- a/arch/mips/include/asm/mach-au1x00/ioremap.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * include/asm-mips/mach-au1x00/ioremap.h - */ -#ifndef __ASM_MACH_AU1X00_IOREMAP_H -#define __ASM_MACH_AU1X00_IOREMAP_H - -#include <linux/types.h> - -#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI) -extern phys_addr_t __fixup_bigphys_addr(phys_addr_t, phys_addr_t); -#else -static inline phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) -{ - return phys_addr; -} -#endif - -/* - * Allow physical addresses to be fixed up to help 36-bit peripherals. - */ -static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) -{ - return __fixup_bigphys_addr(phys_addr, size); -} - -static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size, - unsigned long flags) -{ - return NULL; -} - -static inline int plat_iounmap(const volatile void __iomem *addr) -{ - return 0; -} - -#endif /* __ASM_MACH_AU1X00_IOREMAP_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h index 8fe88c2251e4..9212429d5edd 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h @@ -13,16 +13,16 @@ static inline unsigned long bcm63xx_gpio_count(void) case BCM6328_CPU_ID: return 32; case BCM3368_CPU_ID: - case BCM6358_CPU_ID: return 40; case BCM6338_CPU_ID: return 8; case BCM6345_CPU_ID: return 16; - case BCM6362_CPU_ID: - return 48; + case BCM6358_CPU_ID: case BCM6368_CPU_ID: return 38; + case BCM6362_CPU_ID: + return 48; case BCM6348_CPU_ID: default: return 37; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index bc3444cd4ef2..9ceb5e72889f 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -1367,8 +1367,8 @@ #define MISC_STRAPBUS_6328_REG 0x240 #define STRAPBUS_6328_FCVO_SHIFT 7 #define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT) -#define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28) -#define STRAPBUS_6328_BOOT_SEL_NAND (0 << 28) +#define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 18) +#define STRAPBUS_6328_BOOT_SEL_NAND (0 << 18) /************************************************************************* * _REG relative to RSET_PCIE diff --git a/arch/mips/include/asm/mach-bcm63xx/ioremap.h b/arch/mips/include/asm/mach-bcm63xx/ioremap.h index 8cd261ec0a75..73f31825bbf3 100644 --- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h +++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h @@ -4,11 +4,6 @@ #include <bcm63xx_cpu.h> -static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) -{ - return phys_addr; -} - static inline int is_bcm63xx_internal_registers(phys_addr_t offset) { switch (bcm63xx_get_cpu_id()) { diff --git a/arch/mips/include/asm/mach-bmips/ioremap.h b/arch/mips/include/asm/mach-bmips/ioremap.h index 52632ebc705f..63b4af9916b6 100644 --- a/arch/mips/include/asm/mach-bmips/ioremap.h +++ b/arch/mips/include/asm/mach-bmips/ioremap.h @@ -4,11 +4,6 @@ #include <linux/types.h> -static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) -{ - return phys_addr; -} - static inline int is_bmips_internal_registers(phys_addr_t offset) { if (offset >= 0xfff80000) diff --git a/arch/mips/include/asm/mach-emma2rh/irq.h b/arch/mips/include/asm/mach-emma2rh/irq.h deleted file mode 100644 index d32736736bb3..000000000000 --- a/arch/mips/include/asm/mach-emma2rh/irq.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_EMMA2RH_IRQ_H -#define __ASM_MACH_EMMA2RH_IRQ_H - -#define NR_IRQS 256 - -#include <asm/mach-generic/irq.h> - -#endif /* __ASM_MACH_EMMA2RH_IRQ_H */ diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h index 4e36ea25ed33..f2442b84545c 100644 --- a/arch/mips/include/asm/mach-generic/ioremap.h +++ b/arch/mips/include/asm/mach-generic/ioremap.h @@ -7,15 +7,6 @@ #include <linux/types.h> -/* - * Allow physical addresses to be fixed up to help peripherals located - * outside the low 32-bit range -- generic pass-through version. - */ -static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) -{ - return phys_addr; -} - static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size, unsigned long flags) { diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h index be546a0f65fa..72ac2c202c55 100644 --- a/arch/mips/include/asm/mach-generic/irq.h +++ b/arch/mips/include/asm/mach-generic/irq.h @@ -36,10 +36,4 @@ #endif /* CONFIG_IRQ_MIPS_CPU */ -#ifdef CONFIG_MIPS_GIC -#ifndef MIPS_GIC_IRQ_BASE -#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) -#endif -#endif /* CONFIG_MIPS_GIC */ - #endif /* __ASM_MACH_GENERIC_IRQ_H */ diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h index 24d5e31bcfa6..66421e9a6aa6 100644 --- a/arch/mips/include/asm/mach-ip27/spaces.h +++ b/arch/mips/include/asm/mach-ip27/spaces.h @@ -10,17 +10,19 @@ #ifndef _ASM_MACH_IP27_SPACES_H #define _ASM_MACH_IP27_SPACES_H +#include <linux/const.h> + /* * IP27 uses the R10000's uncached attribute feature. Attribute 3 selects * uncached memory addressing. Hide the definitions on 32-bit compilation * of the compat-vdso code. */ #ifdef CONFIG_64BIT -#define HSPEC_BASE 0x9000000000000000 -#define IO_BASE 0x9200000000000000 -#define MSPEC_BASE 0x9400000000000000 -#define UNCAC_BASE 0x9600000000000000 -#define CAC_BASE 0xa800000000000000 +#define HSPEC_BASE _AC(0x9000000000000000, UL) +#define IO_BASE _AC(0x9200000000000000, UL) +#define MSPEC_BASE _AC(0x9400000000000000, UL) +#define UNCAC_BASE _AC(0x9600000000000000, UL) +#define CAC_BASE _AC(0xa800000000000000, UL) #endif #define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK)) diff --git a/arch/mips/include/asm/mach-ip30/war.h b/arch/mips/include/asm/mach-ip30/war.h index a98ba204f183..a1fa0c1f5300 100644 --- a/arch/mips/include/asm/mach-ip30/war.h +++ b/arch/mips/include/asm/mach-ip30/war.h @@ -8,19 +8,17 @@ #define R4600_V1_INDEX_ICACHEOP_WAR 0 #define R4600_V1_HIT_CACHEOP_WAR 0 #define R4600_V2_HIT_CACHEOP_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 #define BCM1250_M3_WAR 0 #define SIBYTE_1956_WAR 0 #define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 #define TX49XX_ICACHE_INDEX_INV_WAR 0 #define ICACHE_REFILLS_WORKAROUND_WAR 0 - #ifdef CONFIG_CPU_R10000 #define R10000_LLSC_WAR 1 #else #define R10000_LLSC_WAR 0 #endif +#define MIPS34K_MISSED_ITLB_WAR 0 #endif /* __ASM_MIPS_MACH_IP30_WAR_H */ diff --git a/arch/mips/include/asm/mach-jz4740/base.h b/arch/mips/include/asm/mach-jz4740/base.h deleted file mode 100644 index 96b2d6674cdb..000000000000 --- a/arch/mips/include/asm/mach-jz4740/base.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_MACH_JZ4740_BASE_H__ -#define __ASM_MACH_JZ4740_BASE_H__ - -#define JZ4740_CPM_BASE_ADDR 0x10000000 -#define JZ4740_INTC_BASE_ADDR 0x10001000 -#define JZ4740_WDT_BASE_ADDR 0x10002000 -#define JZ4740_TCU_BASE_ADDR 0x10002010 -#define JZ4740_RTC_BASE_ADDR 0x10003000 -#define JZ4740_GPIO_BASE_ADDR 0x10010000 -#define JZ4740_AIC_BASE_ADDR 0x10020000 -#define JZ4740_MSC_BASE_ADDR 0x10021000 -#define JZ4740_UART0_BASE_ADDR 0x10030000 -#define JZ4740_UART1_BASE_ADDR 0x10031000 -#define JZ4740_I2C_BASE_ADDR 0x10042000 -#define JZ4740_SSI_BASE_ADDR 0x10043000 -#define JZ4740_SADC_BASE_ADDR 0x10070000 -#define JZ4740_EMC_BASE_ADDR 0x13010000 -#define JZ4740_DMAC_BASE_ADDR 0x13020000 -#define JZ4740_UHC_BASE_ADDR 0x13030000 -#define JZ4740_UDC_BASE_ADDR 0x13040000 -#define JZ4740_LCD_BASE_ADDR 0x13050000 -#define JZ4740_SLCD_BASE_ADDR 0x13050000 -#define JZ4740_CIM_BASE_ADDR 0x13060000 -#define JZ4740_IPU_BASE_ADDR 0x13080000 - -#endif diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h deleted file mode 100644 index e5d2a5311a3a..000000000000 --- a/arch/mips/include/asm/mach-jz4740/dma.h +++ /dev/null @@ -1,23 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ7420/JZ4740 DMA definitions - */ - -#ifndef __ASM_MACH_JZ4740_DMA_H__ -#define __ASM_MACH_JZ4740_DMA_H__ - -enum jz4740_dma_request_type { - JZ4740_DMA_TYPE_AUTO_REQUEST = 8, - JZ4740_DMA_TYPE_UART_TRANSMIT = 20, - JZ4740_DMA_TYPE_UART_RECEIVE = 21, - JZ4740_DMA_TYPE_SPI_TRANSMIT = 22, - JZ4740_DMA_TYPE_SPI_RECEIVE = 23, - JZ4740_DMA_TYPE_MMC_TRANSMIT = 26, - JZ4740_DMA_TYPE_MMC_RECEIVE = 27, - JZ4740_DMA_TYPE_TCU = 28, - JZ4740_DMA_TYPE_SADC = 29, - JZ4740_DMA_TYPE_SLCD = 30, -}; - -#endif /* __ASM_JZ4740_DMA_H__ */ diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h index 09c38eac671a..27c543bd340f 100644 --- a/arch/mips/include/asm/mach-jz4740/irq.h +++ b/arch/mips/include/asm/mach-jz4740/irq.h @@ -8,49 +8,6 @@ #define __ASM_MACH_JZ4740_IRQ_H__ #define MIPS_CPU_IRQ_BASE 0 -#define JZ4740_IRQ_BASE 8 - -#ifdef CONFIG_MACH_JZ4740 -# define NR_INTC_IRQS 32 -#else -# define NR_INTC_IRQS 64 -#endif - -/* 1st-level interrupts */ -#define JZ4740_IRQ(x) (JZ4740_IRQ_BASE + (x)) -#define JZ4740_IRQ_I2C JZ4740_IRQ(1) -#define JZ4740_IRQ_UHC JZ4740_IRQ(3) -#define JZ4740_IRQ_UART1 JZ4740_IRQ(8) -#define JZ4740_IRQ_UART0 JZ4740_IRQ(9) -#define JZ4740_IRQ_SADC JZ4740_IRQ(12) -#define JZ4740_IRQ_MSC JZ4740_IRQ(14) -#define JZ4740_IRQ_RTC JZ4740_IRQ(15) -#define JZ4740_IRQ_SSI JZ4740_IRQ(16) -#define JZ4740_IRQ_CIM JZ4740_IRQ(17) -#define JZ4740_IRQ_AIC JZ4740_IRQ(18) -#define JZ4740_IRQ_ETH JZ4740_IRQ(19) -#define JZ4740_IRQ_DMAC JZ4740_IRQ(20) -#define JZ4740_IRQ_TCU2 JZ4740_IRQ(21) -#define JZ4740_IRQ_TCU1 JZ4740_IRQ(22) -#define JZ4740_IRQ_TCU0 JZ4740_IRQ(23) -#define JZ4740_IRQ_UDC JZ4740_IRQ(24) -#define JZ4740_IRQ_GPIO3 JZ4740_IRQ(25) -#define JZ4740_IRQ_GPIO2 JZ4740_IRQ(26) -#define JZ4740_IRQ_GPIO1 JZ4740_IRQ(27) -#define JZ4740_IRQ_GPIO0 JZ4740_IRQ(28) -#define JZ4740_IRQ_IPU JZ4740_IRQ(29) -#define JZ4740_IRQ_LCD JZ4740_IRQ(30) - -#define JZ4780_IRQ_TCU2 JZ4740_IRQ(25) - -/* 2nd-level interrupts */ -#define JZ4740_IRQ_DMA(x) (JZ4740_IRQ(NR_INTC_IRQS) + (x)) - -#define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x)) -#define JZ4740_IRQ_GPIO(x) (JZ4740_IRQ(NR_INTC_IRQS + 16) + (x)) - -#define JZ4740_IRQ_ADC_BASE JZ4740_IRQ(NR_INTC_IRQS + 144) - -#define NR_IRQS (JZ4740_IRQ_ADC_BASE + 6) +#define NR_IRQS 256 #endif diff --git a/arch/mips/include/asm/mach-jz4740/timer.h b/arch/mips/include/asm/mach-jz4740/timer.h deleted file mode 100644 index 8a19cfe5bed7..000000000000 --- a/arch/mips/include/asm/mach-jz4740/timer.h +++ /dev/null @@ -1,126 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ4740 platform timer support - */ - -#ifndef __ASM_MACH_JZ4740_TIMER -#define __ASM_MACH_JZ4740_TIMER - -#define JZ_REG_TIMER_STOP 0x0C -#define JZ_REG_TIMER_STOP_SET 0x1C -#define JZ_REG_TIMER_STOP_CLEAR 0x2C -#define JZ_REG_TIMER_ENABLE 0x00 -#define JZ_REG_TIMER_ENABLE_SET 0x04 -#define JZ_REG_TIMER_ENABLE_CLEAR 0x08 -#define JZ_REG_TIMER_FLAG 0x10 -#define JZ_REG_TIMER_FLAG_SET 0x14 -#define JZ_REG_TIMER_FLAG_CLEAR 0x18 -#define JZ_REG_TIMER_MASK 0x20 -#define JZ_REG_TIMER_MASK_SET 0x24 -#define JZ_REG_TIMER_MASK_CLEAR 0x28 - -#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x30) -#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x34) -#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x38) -#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x3C) - -#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10) -#define JZ_TIMER_IRQ_FULL(x) BIT(x) - -#define JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN BIT(9) -#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW BIT(8) -#define JZ_TIMER_CTRL_PWM_ENABLE BIT(7) -#define JZ_TIMER_CTRL_PRESCALE_MASK 0x1c -#define JZ_TIMER_CTRL_PRESCALE_OFFSET 0x3 -#define JZ_TIMER_CTRL_PRESCALE_1 (0 << 3) -#define JZ_TIMER_CTRL_PRESCALE_4 (1 << 3) -#define JZ_TIMER_CTRL_PRESCALE_16 (2 << 3) -#define JZ_TIMER_CTRL_PRESCALE_64 (3 << 3) -#define JZ_TIMER_CTRL_PRESCALE_256 (4 << 3) -#define JZ_TIMER_CTRL_PRESCALE_1024 (5 << 3) - -#define JZ_TIMER_CTRL_PRESCALER(x) ((x) << JZ_TIMER_CTRL_PRESCALE_OFFSET) - -#define JZ_TIMER_CTRL_SRC_EXT BIT(2) -#define JZ_TIMER_CTRL_SRC_RTC BIT(1) -#define JZ_TIMER_CTRL_SRC_PCLK BIT(0) - -extern void __iomem *jz4740_timer_base; -void __init jz4740_timer_init(void); - -void jz4740_timer_enable_watchdog(void); -void jz4740_timer_disable_watchdog(void); - -static inline void jz4740_timer_stop(unsigned int timer) -{ - writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET); -} - -static inline void jz4740_timer_start(unsigned int timer) -{ - writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR); -} - -static inline bool jz4740_timer_is_enabled(unsigned int timer) -{ - return readb(jz4740_timer_base + JZ_REG_TIMER_ENABLE) & BIT(timer); -} - -static inline void jz4740_timer_enable(unsigned int timer) -{ - writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET); -} - -static inline void jz4740_timer_disable(unsigned int timer) -{ - writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR); -} - -static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period) -{ - writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer)); -} - -static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty) -{ - writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer)); -} - -static inline void jz4740_timer_set_count(unsigned int timer, uint16_t count) -{ - writew(count, jz4740_timer_base + JZ_REG_TIMER_CNT(timer)); -} - -static inline uint16_t jz4740_timer_get_count(unsigned int timer) -{ - return readw(jz4740_timer_base + JZ_REG_TIMER_CNT(timer)); -} - -static inline void jz4740_timer_ack_full(unsigned int timer) -{ - writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR); -} - -static inline void jz4740_timer_irq_full_enable(unsigned int timer) -{ - writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR); - writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR); -} - -static inline void jz4740_timer_irq_full_disable(unsigned int timer) -{ - writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET); -} - -static inline void jz4740_timer_set_ctrl(unsigned int timer, uint16_t ctrl) -{ - writew(ctrl, jz4740_timer_base + JZ_REG_TIMER_CTRL(timer)); -} - -static inline uint16_t jz4740_timer_get_ctrl(unsigned int timer) -{ - return readw(jz4740_timer_base + JZ_REG_TIMER_CTRL(timer)); -} - -#endif diff --git a/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h index f03c1c42dd90..10226976f7b7 100644 --- a/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h @@ -46,7 +46,6 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 diff --git a/arch/mips/include/asm/mach-lasat/irq.h b/arch/mips/include/asm/mach-lasat/irq.h deleted file mode 100644 index e8994921779e..000000000000 --- a/arch/mips/include/asm/mach-lasat/irq.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_MACH_LASAT_IRQ_H -#define _ASM_MACH_LASAT_IRQ_H - -#define LASAT_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2) - -#define LASAT_IRQ_BASE 8 -#define LASAT_IRQ_END 23 - -#define NR_IRQS 24 - -#include <asm/mach-generic/irq.h> - -#endif /* _ASM_MACH_LASAT_IRQ_H */ diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h deleted file mode 100644 index 6666a8871a23..000000000000 --- a/arch/mips/include/asm/mach-lasat/mach-gt64120.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. - * - * The reason I'm duplicating this is so that the 64120/96100 - * defines won't be confusing in the source code. - */ -#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H -#define _ASM_GT64120_LASAT_GT64120_DEP_H - -/* - * GT64120 config space base address on Lasat 100 - */ -#define GT64120_BASE (KSEG1ADDR(0x14000000)) - -/* - * PCI Bus allocation - * - * (Guessing ...) - */ -#define GT_PCI_MEM_BASE 0x12000000UL -#define GT_PCI_MEM_SIZE 0x02000000UL -#define GT_PCI_IO_BASE 0x10000000UL -#define GT_PCI_IO_SIZE 0x02000000UL -#define GT_ISA_IO_BASE PCI_IO_BASE - -#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */ diff --git a/arch/mips/include/asm/mach-loongson2ef/loongson.h b/arch/mips/include/asm/mach-loongson2ef/loongson.h index 5008af0a1a19..57e571128489 100644 --- a/arch/mips/include/asm/mach-loongson2ef/loongson.h +++ b/arch/mips/include/asm/mach-loongson2ef/loongson.h @@ -244,6 +244,7 @@ static inline void do_perfcnt_IRQ(void) #ifdef CONFIG_CPU_SUPPORTS_CPUFREQ #include <linux/cpufreq.h> extern struct cpufreq_frequency_table loongson2_clockmod_table[]; +extern int loongson2_cpu_set_rate(unsigned long rate_khz); #endif /* diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h index 2ed483e32d8c..b35be709f9da 100644 --- a/arch/mips/include/asm/mach-loongson64/boot_param.h +++ b/arch/mips/include/asm/mach-loongson64/boot_param.h @@ -192,6 +192,11 @@ struct boot_params { struct efi_reset_system_t reset_system; }; +enum loongson_bridge_type { + LS7A = 1, + RS780E = 2 +}; + struct loongson_system_configuration { u32 nr_cpus; u32 nr_nodes; @@ -200,6 +205,7 @@ struct loongson_system_configuration { u16 boot_cpu_id; u16 reserved_cpus_mask; enum loongson_cpu_type cputype; + enum loongson_bridge_type bridgetype; u64 ht_control_base; u64 pci_mem_start_addr; u64 pci_mem_end_addr; @@ -215,9 +221,14 @@ struct loongson_system_configuration { u32 nr_sensors; struct sensor_device sensors[MAX_SENSORS]; u64 workarounds; + void (*early_config)(void); }; extern struct efi_memory_map_loongson *loongson_memmap; extern struct loongson_system_configuration loongson_sysconf; +extern u32 node_id_offset; +extern void ls7a_early_config(void); +extern void rs780e_early_config(void); + #endif diff --git a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h index 4fab38c743dd..b6e9c99b85a5 100644 --- a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h @@ -48,5 +48,6 @@ #define cpu_hwrena_impl_bits 0xc0000000 #define cpu_has_mac2008_only 1 #define cpu_has_mips_r2_exec_hazard 0 +#define cpu_has_perf_cntr_intr_bit 0 #endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-loongson64/cpucfg-emul.h b/arch/mips/include/asm/mach-loongson64/cpucfg-emul.h new file mode 100644 index 000000000000..d64af19c210d --- /dev/null +++ b/arch/mips/include/asm/mach-loongson64/cpucfg-emul.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_MACH_LOONGSON64_CPUCFG_EMUL_H_ +#define _ASM_MACH_LOONGSON64_CPUCFG_EMUL_H_ + +#include <asm/cpu-info.h> + +#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION + +#include <loongson_regs.h> + +#define LOONGSON_FPREV_MASK 0x7 + +void loongson3_cpucfg_synthesize_data(struct cpuinfo_mips *c); + +static inline bool loongson3_cpucfg_emulation_enabled(struct cpuinfo_mips *c) +{ + /* All supported cores have non-zero LOONGSON_CFG1 data. */ + return c->loongson3_cpucfg_data[0] != 0; +} + +static inline u32 loongson3_cpucfg_read_synthesized(struct cpuinfo_mips *c, + __u64 sel) +{ + switch (sel) { + case LOONGSON_CFG0: + return c->processor_id; + case LOONGSON_CFG1: + case LOONGSON_CFG2: + case LOONGSON_CFG3: + return c->loongson3_cpucfg_data[sel - 1]; + case LOONGSON_CFG4: + case LOONGSON_CFG5: + /* CPUCFG selects 4 and 5 are related to the input clock + * signal. + * + * Unimplemented for now. + */ + return 0; + case LOONGSON_CFG6: + /* CPUCFG select 6 is for the undocumented Safe Extension. */ + return 0; + case LOONGSON_CFG7: + /* CPUCFG select 7 is for the virtualization extension. + * We don't know if the two currently known features are + * supported on older cores according to the public + * documentation, so leave this at zero. + */ + return 0; + } + + /* + * Return 0 for unrecognized CPUCFG selects, which is real hardware + * behavior observed on Loongson 3A R4. + */ + return 0; +} +#else +static inline void loongson3_cpucfg_synthesize_data(struct cpuinfo_mips *c) +{ +} + +static inline bool loongson3_cpucfg_emulation_enabled(struct cpuinfo_mips *c) +{ + return false; +} + +static inline u32 loongson3_cpucfg_read_synthesized(struct cpuinfo_mips *c, + __u64 sel) +{ + return 0; +} +#endif + +#endif /* _ASM_MACH_LOONGSON64_CPUCFG_EMUL_H_ */ diff --git a/arch/mips/include/asm/mach-loongson64/loongson_regs.h b/arch/mips/include/asm/mach-loongson64/loongson_regs.h index 363a47a5d26e..83dbb9fdf9c2 100644 --- a/arch/mips/include/asm/mach-loongson64/loongson_regs.h +++ b/arch/mips/include/asm/mach-loongson64/loongson_regs.h @@ -67,6 +67,8 @@ static inline u32 read_cpucfg(u32 reg) #define LOONGSON_CFG1_SFBP BIT(29) #define LOONGSON_CFG1_CDMAP BIT(30) +#define LOONGSON_CFG1_FPREV_OFFSET 1 + #define LOONGSON_CFG2 0x2 #define LOONGSON_CFG2_LEXT1 BIT(0) #define LOONGSON_CFG2_LEXT2 BIT(1) @@ -77,12 +79,12 @@ static inline u32 read_cpucfg(u32 reg) #define LOONGSON_CFG2_LBT3 BIT(6) #define LOONGSON_CFG2_LBTMMU BIT(7) #define LOONGSON_CFG2_LPMP BIT(8) -#define LOONGSON_CFG2_LPMPREV GENMASK(11, 9) +#define LOONGSON_CFG2_LPMREV GENMASK(11, 9) #define LOONGSON_CFG2_LAMO BIT(12) #define LOONGSON_CFG2_LPIXU BIT(13) -#define LOONGSON_CFG2_LPIXUN BIT(14) -#define LOONGSON_CFG2_LZVP BIT(15) -#define LOONGSON_CFG2_LZVREV GENMASK(18, 16) +#define LOONGSON_CFG2_LPIXNU BIT(14) +#define LOONGSON_CFG2_LVZP BIT(15) +#define LOONGSON_CFG2_LVZREV GENMASK(18, 16) #define LOONGSON_CFG2_LGFTP BIT(19) #define LOONGSON_CFG2_LGFTPREV GENMASK(22, 20) #define LOONGSON_CFG2_LLFTP BIT(23) @@ -90,6 +92,13 @@ static inline u32 read_cpucfg(u32 reg) #define LOONGSON_CFG2_LCSRP BIT(27) #define LOONGSON_CFG2_LDISBLIKELY BIT(28) +#define LOONGSON_CFG2_LPMREV_OFFSET 9 +#define LOONGSON_CFG2_LPM_REV1 (1 << LOONGSON_CFG2_LPMREV_OFFSET) +#define LOONGSON_CFG2_LPM_REV2 (2 << LOONGSON_CFG2_LPMREV_OFFSET) +#define LOONGSON_CFG2_LVZREV_OFFSET 16 +#define LOONGSON_CFG2_LVZ_REV1 (1 << LOONGSON_CFG2_LVZREV_OFFSET) +#define LOONGSON_CFG2_LVZ_REV2 (2 << LOONGSON_CFG2_LVZREV_OFFSET) + #define LOONGSON_CFG3 0x3 #define LOONGSON_CFG3_LCAMP BIT(0) #define LOONGSON_CFG3_LCAMREV GENMASK(3, 1) @@ -97,6 +106,16 @@ static inline u32 read_cpucfg(u32 reg) #define LOONGSON_CFG3_LCAMKW GENMASK(19, 12) #define LOONGSON_CFG3_LCAMVW GENMASK(27, 20) +#define LOONGSON_CFG3_LCAMREV_OFFSET 1 +#define LOONGSON_CFG3_LCAM_REV1 (1 << LOONGSON_CFG3_LCAMREV_OFFSET) +#define LOONGSON_CFG3_LCAM_REV2 (2 << LOONGSON_CFG3_LCAMREV_OFFSET) +#define LOONGSON_CFG3_LCAMNUM_OFFSET 4 +#define LOONGSON_CFG3_LCAMNUM_REV1 (0x3f << LOONGSON_CFG3_LCAMNUM_OFFSET) +#define LOONGSON_CFG3_LCAMKW_OFFSET 12 +#define LOONGSON_CFG3_LCAMKW_REV1 (0x27 << LOONGSON_CFG3_LCAMKW_OFFSET) +#define LOONGSON_CFG3_LCAMVW_OFFSET 20 +#define LOONGSON_CFG3_LCAMVW_REV1 (0x3f << LOONGSON_CFG3_LCAMVW_OFFSET) + #define LOONGSON_CFG4 0x4 #define LOONGSON_CFG4_CCFREQ GENMASK(31, 0) @@ -139,7 +158,7 @@ static inline u64 csr_readq(u32 reg) { u64 __res; - /* DWRCSR reg, val */ + /* DRDCSR reg, val */ __asm__ __volatile__( "parse_r __res,%0\n\t" "parse_r reg,%1\n\t" diff --git a/arch/mips/include/asm/mach-loongson64/mc146818rtc.h b/arch/mips/include/asm/mach-loongson64/mc146818rtc.h deleted file mode 100644 index ebdccfee50be..000000000000 --- a/arch/mips/include/asm/mach-loongson64/mc146818rtc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org) - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_LOONGSON64_MC146818RTC_H -#define __ASM_MACH_LOONGSON64_MC146818RTC_H - -#include <linux/io.h> - -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_IRQ 8 - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - return inb_p(RTC_PORT(1)); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - outb_p(addr, RTC_PORT(0)); - outb_p(data, RTC_PORT(1)); -} - -#define RTC_ALWAYS_BCD 0 - -#ifndef mc146818_decode_year -#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970) -#endif - -#endif /* __ASM_MACH_LOONGSON64_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-loongson64/spaces.h b/arch/mips/include/asm/mach-loongson64/spaces.h index e85bc1d9c4f2..3de0ac9d8829 100644 --- a/arch/mips/include/asm/mach-loongson64/spaces.h +++ b/arch/mips/include/asm/mach-loongson64/spaces.h @@ -6,5 +6,13 @@ #define CAC_BASE _AC(0x9800000000000000, UL) #endif /* CONFIG_64BIT */ +/* Skip 128k to trap NULL pointer dereferences */ +#define PCI_IOBASE _AC(0xc000000000000000 + SZ_128K, UL) +#define PCI_IOSIZE SZ_16M +#define MAP_BASE (PCI_IOBASE + PCI_IOSIZE) + +/* Reserved at the start of PCI_IOBASE for legacy drivers */ +#define MMIO_LOWER_RESERVED 0x10000 + #include <asm/mach-generic/spaces.h> #endif diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h deleted file mode 100644 index 016fa9446ba9..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H - -#define cpu_has_mips16 1 -#define cpu_has_dsp 1 -/* #define cpu_has_dsp2 ??? - do runtime detection */ -#define cpu_has_mipsmt 1 -#define cpu_has_fpu 0 - -#define cpu_has_mips32r1 0 -#define cpu_has_mips32r2 1 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#endif /* __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h deleted file mode 100644 index 50de6876e1c9..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h +++ /dev/null @@ -1,139 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Defines for the MSP interrupt controller. - * - * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. - * Author: Carsten Langgaard, carstenl@mips.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#ifndef _MSP_CIC_INT_H -#define _MSP_CIC_INT_H - -/* - * The PMC-Sierra CIC interrupts are all centrally managed by the - * CIC sub-system. - * We attempt to keep the interrupt numbers as consistent as possible - * across all of the MSP devices, but some differences will creep in ... - * The interrupts which are directly forwarded to the MIPS core interrupts - * are assigned interrupts in the range 0-7, interrupts cascaded through - * the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4 - * (MSP_INT_CIC). Currently we don't really distinguish between VPE1 - * and VPE0 (or thread contexts for that matter). Will have to fix. - * The PER interrupts are assigned interrupts in the range 40-71. -*/ - - -/* - * IRQs directly forwarded to the CPU - */ -#define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */ -#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */ -#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */ -#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */ - -/* - * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) - * These defines should be tied to the register definitions for the CIC - * interrupt routine. For now, just use hard-coded values. - */ -#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8) -#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0) - /* External interrupt 0 */ -#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1) - /* External interrupt 1 */ -#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2) - /* External interrupt 2 */ -#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3) - /* External interrupt 3 */ -#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4) - /* CPU interface interrupt */ -#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5) - /* External interrupt 4 */ -#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6) - /* Cascaded IRQ for USB */ -#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7) - /* Sec engine mailbox IRQ */ -#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8) - /* External interrupt 5 */ -#define MSP_INT_TDM (MSP_CIC_INTBASE + 9) - /* TDM interrupt */ -#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ -#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ -#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12) - /* Cascaded IRQ for sec engine */ -#define MSP_INT_PER (MSP_CIC_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17) - /* VPE0 MIPS timer */ -#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18) - /* Block Copy */ -#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19) - /* UART 0 */ -#define MSP_INT_PCI (MSP_CIC_INTBASE + 20) - /* PCI subsystem */ -#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21) - /* External interrupt 5 */ -#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22) - /* PCI Message Signal */ -#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23) - /* Cascaded ADSL2+ SAR IRQ */ -#define MSP_INT_DSL (MSP_CIC_INTBASE + 24) - /* ADSL2+ IRQ */ -#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25) - /* SLP error condition */ -#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26) - /* VPE1 MIPS timer */ -#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27) - /* VPE0 Performance counter */ -#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28) - /* VPE1 Performance counter */ -#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29) - /* External interrupt 5 */ -#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30) - /* VPE0 Software interrupt */ -#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31) - /* VPE0 Software interrupt */ - -/* - * IRQs cascaded on CIC PER interrupt (MSP_INT_PER) - */ -#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32) -/* Reserved 0-1 */ -#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ -#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ -#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) - /* Peripheral timer block out 0 */ -#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) - /* Peripheral timer block out 1 */ -/* Reserved 9 */ -#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ -#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ -#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ -#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ - -#endif /* !_MSP_CIC_INT_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h deleted file mode 100644 index daacebb047c2..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h +++ /dev/null @@ -1,343 +0,0 @@ -/* - * - * Macros for external SMP-safe access to the PMC MSP71xx reference - * board GPIO pins - * - * Copyright 2010 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MSP_GPIO_MACROS_H__ -#define __MSP_GPIO_MACROS_H__ - -#include <msp_regops.h> -#include <msp_regs.h> - -#ifdef CONFIG_PMC_MSP7120_GW -#define MSP_NUM_GPIOS 20 -#else -#define MSP_NUM_GPIOS 28 -#endif - -/* -- GPIO Enumerations -- */ -enum msp_gpio_data { - MSP_GPIO_LO = 0, - MSP_GPIO_HI = 1, - MSP_GPIO_NONE, /* Special - Means pin is out of range */ - MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */ -}; - -enum msp_gpio_mode { - MSP_GPIO_INPUT = 0x0, - /* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */ - MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */ - MSP_GPIO_OUTPUT = 0x8, - MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */ - MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */ - MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */ - MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */ -}; - -/* -- Static Tables -- */ - -/* Maps pins to data register */ -static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = { - /* GPIO 0 and 1 on the first register */ - GPIO_DATA1_REG, GPIO_DATA1_REG, - /* GPIO 2, 3, 4, and 5 on the second register */ - GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, - /* GPIO 6, 7, 8, and 9 on the third register */ - GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, - /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */ - GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, - GPIO_DATA4_REG, GPIO_DATA4_REG, - /* GPIO 16 - 23 on the first strange EXTENDED register */ - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - /* GPIO 24 - 27 on the second strange EXTENDED register */ - EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, - EXTENDED_GPIO2_REG, -}; - -/* Maps pins to mode register */ -static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = { - /* GPIO 0 and 1 on the first register */ - GPIO_CFG1_REG, GPIO_CFG1_REG, - /* GPIO 2, 3, 4, and 5 on the second register */ - GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, - /* GPIO 6, 7, 8, and 9 on the third register */ - GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, - /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */ - GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, - GPIO_CFG4_REG, GPIO_CFG4_REG, - /* GPIO 16 - 23 on the first strange EXTENDED register */ - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, - /* GPIO 24 - 27 on the second strange EXTENDED register */ - EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, - EXTENDED_GPIO2_REG, -}; - -/* Maps 'basic' pins to relative offset from 0 per register */ -static int MSP_GPIO_OFFSET[] = { - /* GPIO 0 and 1 on the first register */ - 0, 0, - /* GPIO 2, 3, 4, and 5 on the second register */ - 2, 2, 2, 2, - /* GPIO 6, 7, 8, and 9 on the third register */ - 6, 6, 6, 6, - /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */ - 10, 10, 10, 10, 10, 10, -}; - -/* Maps MODE to allowed pin mask */ -static unsigned int MSP_GPIO_MODE_ALLOWED[] = { - 0xffffffff, /* Mode 0 - INPUT */ - 0x00000, /* Mode 1 - INTERRUPT */ - 0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/ - 0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */ - 0xffffffff, /* Mode 8 - OUTPUT */ - 0x0000f, /* Mode 9 - UART_OUTPUT/ - PERF_TIMERA (GPIO 0, 1, 2, 3) */ - 0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */ - 0x00000, /* Mode b - Not really a mode! */ -}; - -/* -- Bit masks -- */ - -/* This gives you the 'register relative offset gpio' number */ -#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio]) - -/* These take the 'register relative offset gpio' number */ -#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio) -#define BASIC_MODE_REG_VALUE(mode, ogpio) \ - (mode << BASIC_MODE_REG_SHIFT(ogpio)) -#define BASIC_MODE_REG_MASK(ogpio) \ - BASIC_MODE_REG_VALUE(0xf, ogpio) -#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4) -#define BASIC_MODE_REG_FROM_REG(data, ogpio) \ - ((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio)) - -/* These take the actual GPIO number (0 through 15) */ -#define BASIC_DATA_MASK(gpio) \ - BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE_MASK(gpio) \ - BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE(mode, gpio) \ - BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE_SHIFT(gpio) \ - BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio)) -#define BASIC_MODE_FROM_REG(data, gpio) \ - BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio)) - -/* - * Each extended GPIO register is 32 bits long and is responsible for up to - * eight GPIOs. The least significant 16 bits contain the set and clear bit - * pair for each of the GPIOs. The most significant 16 bits contain the - * disable and enable bit pair for each of the GPIOs. For example, the - * extended GPIO reg for GPIOs 16-23 is as follows: - * - * 31: GPIO23_DISABLE - * ... - * 19: GPIO17_DISABLE - * 18: GPIO17_ENABLE - * 17: GPIO16_DISABLE - * 16: GPIO16_ENABLE - * ... - * 3: GPIO17_SET - * 2: GPIO17_CLEAR - * 1: GPIO16_SET - * 0: GPIO16_CLEAR - */ - -/* This gives the 'register relative offset gpio' number */ -#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24) - -/* These take the 'register relative offset gpio' number */ -#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16)) -#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16)) -#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2)) -#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2)) - -/* These take the actual GPIO number (16 through 27) */ -#define EXTENDED_DISABLE(gpio) \ - EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio)) -#define EXTENDED_ENABLE(gpio) \ - EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio)) -#define EXTENDED_SET(gpio) \ - EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio)) -#define EXTENDED_CLR(gpio) \ - EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio)) - -#define EXTENDED_FULL_MASK (0xffffffff) - -/* -- API inline-functions -- */ - -/* - * Gets the current value of the specified pin - */ -static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio) -{ - u32 pinhi_mask = 0, pinhi_mask2 = 0; - - if (gpio >= MSP_NUM_GPIOS) - return MSP_GPIO_NONE; - - if (gpio < 16) { - pinhi_mask = BASIC_DATA_MASK(gpio); - } else { - /* - * Two cases are possible with the EXTENDED register: - * - In output mode (ENABLED flag set), check the CLR bit - * - In input mode (ENABLED flag not set), check the SET bit - */ - pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio); - pinhi_mask2 = EXTENDED_SET(gpio); - } - if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) || - (*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2)) - return MSP_GPIO_HI; - else - return MSP_GPIO_LO; -} - -/* Sets the specified pin to the specified value */ -static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio) -{ - if (gpio >= MSP_NUM_GPIOS) - return; - - if (gpio < 16) { - if (data == MSP_GPIO_TOGGLE) - toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio], - BASIC_DATA_MASK(gpio)); - else if (data == MSP_GPIO_HI) - set_reg32(MSP_GPIO_DATA_REGISTER[gpio], - BASIC_DATA_MASK(gpio)); - else - clear_reg32(MSP_GPIO_DATA_REGISTER[gpio], - BASIC_DATA_MASK(gpio)); - } else { - if (data == MSP_GPIO_TOGGLE) { - /* Special ugly case: - * We have to read the CLR bit. - * If set, we write the CLR bit. - * If not, we write the SET bit. - */ - u32 tmpdata; - - custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio], - tmpdata); - if (tmpdata & EXTENDED_CLR(gpio)) - tmpdata = EXTENDED_CLR(gpio); - else - tmpdata = EXTENDED_SET(gpio); - custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio], - tmpdata); - } else { - u32 newdata; - - if (data == MSP_GPIO_HI) - newdata = EXTENDED_SET(gpio); - else - newdata = EXTENDED_CLR(gpio); - set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio], - EXTENDED_FULL_MASK, newdata); - } - } -} - -/* Sets the specified pin to the specified value */ -static inline void msp_gpio_pin_hi(unsigned int gpio) -{ - msp_gpio_pin_set(MSP_GPIO_HI, gpio); -} - -/* Sets the specified pin to the specified value */ -static inline void msp_gpio_pin_lo(unsigned int gpio) -{ - msp_gpio_pin_set(MSP_GPIO_LO, gpio); -} - -/* Sets the specified pin to the opposite value */ -static inline void msp_gpio_pin_toggle(unsigned int gpio) -{ - msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio); -} - -/* Gets the mode of the specified pin */ -static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio) -{ - enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN; - uint32_t data; - - if (gpio >= MSP_NUM_GPIOS) - return retval; - - data = *MSP_GPIO_MODE_REGISTER[gpio]; - - if (gpio < 16) { - retval = BASIC_MODE_FROM_REG(data, gpio); - } else { - /* Extended pins can only be either INPUT or OUTPUT */ - if (data & EXTENDED_ENABLE(gpio)) - retval = MSP_GPIO_OUTPUT; - else - retval = MSP_GPIO_INPUT; - } - - return retval; -} - -/* - * Sets the specified mode on the requested pin - * Returns 0 on success, or -1 if that mode is not allowed on this pin - */ -static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio) -{ - u32 modemask, newmode; - - if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode]) - return -1; - - if (gpio >= MSP_NUM_GPIOS) - return -1; - - if (gpio < 16) { - modemask = BASIC_MODE_MASK(gpio); - newmode = BASIC_MODE(mode, gpio); - } else { - modemask = EXTENDED_FULL_MASK; - if (mode == MSP_GPIO_INPUT) - newmode = EXTENDED_DISABLE(gpio); - else - newmode = EXTENDED_ENABLE(gpio); - } - /* Do the set atomically */ - set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode); - - return 0; -} - -#endif /* __MSP_GPIO_MACROS_H__ */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h deleted file mode 100644 index 55078b40f5b5..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Defines for the MSP interrupt handlers. - * - * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved. - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#ifndef _MSP_INT_H -#define _MSP_INT_H - -/* - * The PMC-Sierra MSP product line has at least two different interrupt - * controllers, the SLP register based scheme and the CIC interrupt - * controller block mechanism. This file distinguishes between them - * so that devices see a uniform interface. - */ - -#if defined(CONFIG_IRQ_MSP_SLP) - #include "msp_slp_int.h" -#elif defined(CONFIG_IRQ_MSP_CIC) - #include "msp_cic_int.h" -#else - #error "What sort of interrupt controller does *your* MSP have?" -#endif - -#endif /* !_MSP_INT_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h deleted file mode 100644 index 5b2535efceb2..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h +++ /dev/null @@ -1,189 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (c) 2000-2006 PMC-Sierra INC. - * - * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS - * SOFTWARE. - */ - -#ifndef _MSP_PCI_H_ -#define _MSP_PCI_H_ - -#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220)) - -/* - * It is convenient to program the OATRAN register so that - * Athena virtual address space and PCI address space are - * the same. This is not a requirement, just a convenience. - * - * The only hard restrictions on the value of OATRAN is that - * OATRAN must not be programmed to allow translated memory - * addresses to fall within the lowest 512MB of - * PCI address space. This region is hardcoded - * for use as Athena PCI Host Controller target - * access memory space to the Athena's SDRAM. - * - * Note that OATRAN applies only to memory accesses, not - * to I/O accesses. - * - * To program OATRAN to make Athena virtual address space - * and PCI address space have the same values, OATRAN - * is to be programmed to 0xB8000000. The top seven - * bits of the value mimic the seven bits clipped off - * by the PCI Host controller. - * - * With OATRAN at the said value, when the CPU does - * an access to its virtual address at, say 0xB900_5000, - * the address appearing on the PCI bus will be - * 0xB900_5000. - * - Michael Penner - */ -#define MSP_PCI_OATRAN 0xB8000000UL - -#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL) -#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000) -#define MSP_PCI_SPACE_END \ - (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1) -#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL) -#define MSP_PCI_IOSPACE_SIZE 0x1000 -#define MSP_PCI_IOSPACE_END \ - (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1) - -/* IRQ for PCI status interrupts */ -#define PCI_STAT_IRQ 20 - -#define QFLUSH_REG_1 0xB7F40000 - -typedef volatile unsigned int pcireg; -typedef void * volatile ppcireg; - -struct pci_block_copy -{ - pcireg unused1; /* +0x00 */ - pcireg unused2; /* +0x04 */ - ppcireg unused3; /* +0x08 */ - ppcireg unused4; /* +0x0C */ - pcireg unused5; /* +0x10 */ - pcireg unused6; /* +0x14 */ - pcireg unused7; /* +0x18 */ - ppcireg unused8; /* +0x1C */ - ppcireg unused9; /* +0x20 */ - pcireg unusedA; /* +0x24 */ - ppcireg unusedB; /* +0x28 */ - ppcireg unusedC; /* +0x2C */ -}; - -enum -{ - config_device_vendor, /* 0 */ - config_status_command, /* 1 */ - config_class_revision, /* 2 */ - config_BIST_header_latency_cache, /* 3 */ - config_BAR0, /* 4 */ - config_BAR1, /* 5 */ - config_BAR2, /* 6 */ - config_not_used7, /* 7 */ - config_not_used8, /* 8 */ - config_not_used9, /* 9 */ - config_CIS, /* 10 */ - config_subsystem, /* 11 */ - config_not_used12, /* 12 */ - config_capabilities, /* 13 */ - config_not_used14, /* 14 */ - config_lat_grant_irq, /* 15 */ - config_message_control,/* 16 */ - config_message_addr, /* 17 */ - config_message_data, /* 18 */ - config_VPD_addr, /* 19 */ - config_VPD_data, /* 20 */ - config_maxregs /* 21 - number of registers */ -}; - -struct msp_pci_regs -{ - pcireg hop_unused_00; /* +0x00 */ - pcireg hop_unused_04; /* +0x04 */ - pcireg hop_unused_08; /* +0x08 */ - pcireg hop_unused_0C; /* +0x0C */ - pcireg hop_unused_10; /* +0x10 */ - pcireg hop_unused_14; /* +0x14 */ - pcireg hop_unused_18; /* +0x18 */ - pcireg hop_unused_1C; /* +0x1C */ - pcireg hop_unused_20; /* +0x20 */ - pcireg hop_unused_24; /* +0x24 */ - pcireg hop_unused_28; /* +0x28 */ - pcireg hop_unused_2C; /* +0x2C */ - pcireg hop_unused_30; /* +0x30 */ - pcireg hop_unused_34; /* +0x34 */ - pcireg if_control; /* +0x38 */ - pcireg oatran; /* +0x3C */ - pcireg reset_ctl; /* +0x40 */ - pcireg config_addr; /* +0x44 */ - pcireg hop_unused_48; /* +0x48 */ - pcireg msg_signaled_int_status; /* +0x4C */ - pcireg msg_signaled_int_mask; /* +0x50 */ - pcireg if_status; /* +0x54 */ - pcireg if_mask; /* +0x58 */ - pcireg hop_unused_5C; /* +0x5C */ - pcireg hop_unused_60; /* +0x60 */ - pcireg hop_unused_64; /* +0x64 */ - pcireg hop_unused_68; /* +0x68 */ - pcireg hop_unused_6C; /* +0x6C */ - pcireg hop_unused_70; /* +0x70 */ - - struct pci_block_copy pci_bc[2] __attribute__((aligned(64))); - - pcireg error_hdr1; /* +0xE0 */ - pcireg error_hdr2; /* +0xE4 */ - - pcireg config[config_maxregs] __attribute__((aligned(256))); - -}; - -#define BPCI_CFGADDR_BUSNUM_SHF 16 -#define BPCI_CFGADDR_FUNCTNUM_SHF 8 -#define BPCI_CFGADDR_REGNUM_SHF 2 -#define BPCI_CFGADDR_ENABLE (1<<31) - -#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */ -#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */ -#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */ -#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */ -#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */ -#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */ -#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */ - -#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */ -#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */ -#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */ -#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */ -#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */ -#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */ -#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */ -#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */ -#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */ -#define BPCI_IFSTATUS_SER (1<<19) /* System error */ -#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */ -#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */ -#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */ -#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */ -#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */ -#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */ -#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */ -#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */ -#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */ - -#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */ -#define BPCI_RESETCTL_RT (1<<4) /* Release time */ -#define BPCI_RESETCTL_CT (1<<8) /* Config time */ -#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */ -#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */ -#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */ - -extern struct msp_pci_regs msp_pci_regs - __attribute__((section(".register"))); -extern unsigned long msp_pci_config_space - __attribute__((section(".register"))); - -#endif /* !_MSP_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h deleted file mode 100644 index 4120a01c30a9..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h +++ /dev/null @@ -1,159 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * MIPS boards bootprom interface for the Linux kernel. - * - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * Author: Carsten Langgaard, carstenl@mips.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#ifndef _ASM_MSP_PROM_H -#define _ASM_MSP_PROM_H - -#include <linux/types.h> - -#define DEVICEID "deviceid" -#define FEATURES "features" -#define PROM_ENV "prom_env" -#define PROM_ENV_FILE "/proc/"PROM_ENV -#define PROM_ENV_SIZE 256 - -#define CPU_DEVID_FAMILY 0x0000ff00 -#define CPU_DEVID_REVISION 0x000000ff - -#define FPGA_IS_POLO(revision) \ - (((revision >= 0xb0) && (revision < 0xd0))) -#define FPGA_IS_5000(revision) \ - ((revision >= 0x80) && (revision <= 0x90)) -#define FPGA_IS_ZEUS(revision) ((revision < 0x7f)) -#define FPGA_IS_DUET(revision) \ - (((revision >= 0xa0) && (revision < 0xb0))) -#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0)) -#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0)) - -#define MACHINE_TYPE_POLO "POLO" -#define MACHINE_TYPE_DUET "DUET" -#define MACHINE_TYPE_ZEUS "ZEUS" -#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB" -#define MACHINE_TYPE_MSP5000 "MSP5000" -#define MACHINE_TYPE_MSP4200 "MSP4200" -#define MACHINE_TYPE_MSP7120 "MSP7120" -#define MACHINE_TYPE_MSP7130 "MSP7130" -#define MACHINE_TYPE_OTHER "OTHER" - -#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA" -#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA" -#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA" -#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA" -#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA" -#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA" -#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA" -#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA" - -/* Device Family definitions */ -#define FAMILY_FPGA 0x0000 -#define FAMILY_ZEUS 0x1000 -#define FAMILY_POLO 0x2000 -#define FAMILY_DUET 0x4000 -#define FAMILY_TRIAD 0x5000 -#define FAMILY_MSP4200 0x4200 -#define FAMILY_MSP4200_FPGA 0x4f00 -#define FAMILY_MSP7100 0x7100 -#define FAMILY_MSP7100_FPGA 0x7f00 - -/* Device Type definitions */ -#define TYPE_MSP7120 0x7120 -#define TYPE_MSP7130 0x7130 - -#define ENET_KEY 'E' -#define ENETTXD_KEY 'e' -#define PCI_KEY 'P' -#define PCIMUX_KEY 'p' -#define SEC_KEY 'S' -#define SPAD_KEY 'D' -#define TDM_KEY 'T' -#define ZSP_KEY 'Z' - -#define FEATURE_NOEXIST '-' -#define FEATURE_EXIST '+' - -#define ENET_MII 'M' -#define ENET_RMII 'R' - -#define ENETTXD_FALLING 'F' -#define ENETTXD_RISING 'R' - -#define PCI_HOST 'H' -#define PCI_PERIPHERAL 'P' - -#define PCIMUX_FULL 'F' -#define PCIMUX_SINGLE 'S' - -#define SEC_DUET 'D' -#define SEC_POLO 'P' -#define SEC_SLOW 'S' -#define SEC_TRIAD 'T' - -#define SPAD_POLO 'P' - -#define TDM_DUET 'D' /* DUET TDMs might exist */ -#define TDM_POLO 'P' /* POLO TDMs might exist */ -#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */ - -#define ZSP_DUET 'D' /* one DUET zsp engine */ -#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */ - -extern char *prom_getenv(char *name); -extern void prom_init_cmdline(void); -extern void prom_meminit(void); -extern void prom_fixup_mem_map(unsigned long start_mem, - unsigned long end_mem); - -extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr); -extern unsigned long get_deviceid(void); -extern char identify_enet(unsigned long interface_num); -extern char identify_enetTxD(unsigned long interface_num); -extern char identify_pci(void); -extern char identify_sec(void); -extern char identify_spad(void); -extern char identify_sec(void); -extern char identify_tdm(void); -extern char identify_zsp(void); -extern unsigned long identify_family(void); -extern unsigned long identify_revision(void); - -/* - * The following macro calls prom_printf and puts the format string - * into an init section so it can be reclaimed. - */ -#define ppfinit(f, x...) \ - do { \ - static char _f[] __initdata = KERN_INFO f; \ - printk(_f, ## x); \ - } while (0) - -/* Memory descriptor management. */ -#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */ - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; - -struct prom_pmemblock { - unsigned long base; /* Within KSEG0. */ - unsigned int size; /* In bytes. */ - unsigned int type; /* free or prom memory */ -}; - -extern int prom_argc; -extern char **prom_argv; -extern char **prom_envp; -extern int *prom_vec; -extern struct prom_pmemblock *prom_getmdesc(void); - -#endif /* !_ASM_MSP_PROM_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h deleted file mode 100644 index 90dbe43c8d27..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h +++ /dev/null @@ -1,237 +0,0 @@ -/* - * SMP/VPE-safe functions to access "registers" (see note). - * - * NOTES: -* - These macros use ll/sc instructions, so it is your responsibility to - * ensure these are available on your platform before including this file. - * - The MIPS32 spec states that ll/sc results are undefined for uncached - * accesses. This means they can't be used on HW registers accessed - * through kseg1. Code which requires these macros for this purpose must - * front-end the registers with cached memory "registers" and have a single - * thread update the actual HW registers. - * - A maximum of 2k of code can be inserted between ll and sc. Every - * memory accesses between the instructions will increase the chance of - * sc failing and having to loop. - * - When using custom_read_reg32/custom_write_reg32 only perform the - * necessary logical operations on the register value in between these - * two calls. All other logic should be performed before the first call. - * - There is a bug on the R10000 chips which has a workaround. If you - * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR' - * to be non-zero. If you are using this header from within linux, you may - * include <asm/war.h> before including this file to have this defined - * appropriately for you. - * - * Copyright 2005-2007 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO - * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., 675 - * Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_REGOPS_H__ -#define __ASM_REGOPS_H__ - -#include <linux/types.h> - -#include <asm/compiler.h> -#include <asm/war.h> - -#ifndef R10000_LLSC_WAR -#define R10000_LLSC_WAR 0 -#endif - -#if R10000_LLSC_WAR == 1 -#define __beqz "beqzl " -#else -#define __beqz "beqz " -#endif - -#ifndef _LINUX_TYPES_H -typedef unsigned int u32; -#endif - -/* - * Sets all the masked bits to the corresponding value bits - */ -static inline void set_value_reg32(volatile u32 *const addr, - u32 const mask, - u32 const value) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: ll %0, %1 # set_value_reg32 \n" - " and %0, %2 \n" - " or %0, %3 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr) - : "ir" (~mask), "ir" (value), GCC_OFF_SMALL_ASM() (*addr)); -} - -/* - * Sets all the masked bits to '1' - */ -static inline void set_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: ll %0, %1 # set_reg32 \n" - " or %0, %2 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr) - : "ir" (mask), GCC_OFF_SMALL_ASM() (*addr)); -} - -/* - * Sets all the masked bits to '0' - */ -static inline void clear_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: ll %0, %1 # clear_reg32 \n" - " and %0, %2 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr) - : "ir" (~mask), GCC_OFF_SMALL_ASM() (*addr)); -} - -/* - * Toggles all masked bits from '0' to '1' and '1' to '0' - */ -static inline void toggle_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: ll %0, %1 # toggle_reg32 \n" - " xor %0, %2 \n" - " sc %0, %1 \n" - " "__beqz"%0, 1b \n" - " nop \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr) - : "ir" (mask), GCC_OFF_SMALL_ASM() (*addr)); -} - -/* - * Read all masked bits others are returned as '0' - */ -static inline u32 read_reg32(volatile u32 *const addr, - u32 const mask) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " lw %0, %1 # read \n" - " and %0, %2 # mask \n" - " .set pop \n" - : "=&r" (temp) - : "m" (*addr), "ir" (mask)); - - return temp; -} - -/* - * blocking_read_reg32 - Read address with blocking load - * - * Uncached writes need to be read back to ensure they reach RAM. - * The returned value must be 'used' to prevent from becoming a - * non-blocking load. - */ -static inline u32 blocking_read_reg32(volatile u32 *const addr) -{ - u32 temp; - - __asm__ __volatile__( - " .set push \n" - " .set noreorder \n" - " lw %0, %1 # read \n" - " move %0, %0 # block \n" - " .set pop \n" - : "=&r" (temp) - : "m" (*addr)); - - return temp; -} - -/* - * For special strange cases only: - * - * If you need custom processing within a ll/sc loop, use the following macros - * VERY CAREFULLY: - * - * u32 tmp; <-- Define a variable to hold the data - * - * custom_read_reg32(address, tmp); <-- Reads the address and put the value - * in the 'tmp' variable given - * - * From here on out, you are (basically) atomic, so don't do anything too - * fancy! - * Also, this code may loop if the end of this block fails to write - * everything back safely due do the other CPU, so do NOT do anything - * with side-effects! - * - * custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely. - */ -#define custom_read_reg32(address, tmp) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set arch=r4000 \n" \ - "1: ll %0, %1 #custom_read_reg32 \n" \ - " .set pop \n" \ - : "=r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \ - : GCC_OFF_SMALL_ASM() (*address)) - -#define custom_write_reg32(address, tmp) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set arch=r4000 \n" \ - " sc %0, %1 #custom_write_reg32 \n" \ - " "__beqz"%0, 1b \n" \ - " nop \n" \ - " .set pop \n" \ - : "=&r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \ - : "0" (tmp), GCC_OFF_SMALL_ASM() (*address)) - -#endif /* __ASM_REGOPS_H__ */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h deleted file mode 100644 index e2ce9be51f3f..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h +++ /dev/null @@ -1,652 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Defines for the address space, registers and register configuration - * (bit masks, access macros etc) for the PMC-Sierra line of MSP products. - * This file contains addess maps for all the devices in the line of - * products but only has register definitions and configuration masks for - * registers which aren't definitely associated with any device. Things - * like clock settings, reset access, the ELB etc. Individual device - * drivers will reference the appropriate XXX_BASE value defined here - * and have individual registers offset from that. - * - * Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved. - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#include <asm/addrspace.h> -#include <linux/types.h> - -#ifndef _ASM_MSP_REGS_H -#define _ASM_MSP_REGS_H - -/* - ######################################################################## - # Address space and device base definitions # - ######################################################################## - */ - -/* - *************************************************************************** - * System Logic and Peripherals (ELB, UART0, etc) device address space * - *************************************************************************** - */ -#define MSP_SLP_BASE 0x1c000000 - /* System Logic and Peripherals */ -#define MSP_RST_BASE (MSP_SLP_BASE + 0x10) - /* System reset register base */ -#define MSP_RST_SIZE 0x0C /* System reset register space */ - -#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C) - /* watchdog timer base */ -#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054) - /* internal timer base */ -#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100) - /* UART0 controller base */ -#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120) - /* Block Copy controller base */ -#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160) - /* Block Copy descriptor base */ - -/* - *************************************************************************** - * PCI address space * - *************************************************************************** - */ -#define MSP_PCI_BASE 0x19000000 - -/* - *************************************************************************** - * MSbus device address space * - *************************************************************************** - */ -#define MSP_MSB_BASE 0x18000000 - /* MSbus address start */ -#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000) - /* Peripheral device registers */ -#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000) - /* MAC A device registers */ -#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000) - /* MAC B device registers */ -#define MSP_MAC_SIZE 0xE0 /* MAC register space */ - -#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000) - /* Security Engine registers */ -#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000) - /* MAC C device registers */ -#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000) - /* ADSL2 device registers */ -#define MSP_USB0_BASE (MSP_MSB_BASE + 0xB00000) - /* USB0 device registers */ -#define MSP_USB1_BASE (MSP_MSB_BASE + 0x300000) - /* USB1 device registers */ -#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000) - /* CPU interface registers */ - -/* Devices within the MSbus peripheral block */ -#define MSP_UART1_BASE (MSP_PER_BASE + 0x030) - /* UART1 controller base */ -#define MSP_SPI_BASE (MSP_PER_BASE + 0x058) - /* SPI/MPI control registers */ -#define MSP_TWI_BASE (MSP_PER_BASE + 0x090) - /* Two-wire control registers */ -#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0) - /* Programmable timer control */ - -/* - *************************************************************************** - * Physical Memory configuration address space * - *************************************************************************** - */ -#define MSP_MEM_CFG_BASE 0x17f00000 - -#define MSP_MEM_INDIRECT_CTL_10 0x10 - -/* - * Notes: - * 1) The SPI registers are split into two blocks, one offset from the - * MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by - * 0x68. The SPI driver definitions for the register must be aware - * of this. - * 2) The block copy engine register are divided into two regions, one - * for the control/configuration of the engine proper and one for the - * values of the descriptors used in the copy process. These have - * different base defines (CTRL_BASE vs DESC_BASE) - * 3) These constants are for physical addresses which means that they - * work correctly with "ioremap" and friends. This means that device - * drivers will need to remap these addresses using ioremap and perhaps - * the readw/writew macros. Or they could use the regptr() macro - * defined below, but the readw/writew calls are the correct thing. - * 4) The UARTs have an additional status register offset from the base - * address. This register isn't used in the standard 8250 driver but - * may be used in other software. Consult the hardware datasheet for - * offset details. - * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers - * start at an offset of 0x84 from the base address but the block of - * registers before this is reserved for the security engine. The - * driver will have to be aware of this but it makes the register - * definitions line up better with the documentation. - */ - -/* - ######################################################################## - # System register definitions. Not associated with a specific device # - ######################################################################## - */ - -/* - * This macro maps the physical register number into uncached space - * and (for C code) casts it into a u32 pointer so it can be dereferenced - * Normally these would be accessed with ioremap and readX/writeX, but - * these are convenient for a lot of internal kernel code. - */ -#ifdef __ASSEMBLER__ - #define regptr(addr) (KSEG1ADDR(addr)) -#else - #define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr))) -#endif - -/* - *************************************************************************** - * System Logic and Peripherals (RESET, ELB, etc) registers * - *************************************************************************** - */ - -/* System Control register definitions */ -#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00) - /* Device-ID RO */ -#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04) - /* Firmware-ID Register RW */ -#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08) - /* System-ID Register-0 RW */ -#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C) - /* System-ID Register-1 RW */ - -/* System Reset register definitions */ -#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10) - /* System Reset Status RO */ -#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14) - /* System Set Reset WO */ -#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18) - /* System Clear Reset WO */ - -/* System Clock Registers */ -#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C) - /* PCI clock generator RW */ -#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20) - /* UART clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x24) */ -/* reserved (MSP_SLP_BASE + 0x28) */ -#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C) - /* PLL1 clock generator RW */ -#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30) - /* PLL0 clock generator RW */ -#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34) - /* MIPS clock generator RW */ -#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38) - /* Voice Eng clock generator RW */ -/* reserved (MSP_SLP_BASE + 0x3C) */ -#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40) - /* MS-Bus clock generator RW */ -#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44) - /* Sec & MAC clock generator RW */ -#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48) - /* Per & TDM clock generator RW */ - -/* Interrupt Controller Registers */ -#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70) - /* Interrupt status register RW */ -#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74) - /* Interrupt enable/mask RW */ -#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78) - /* Security Engine mailbox RW */ -#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C) - /* Voice Engine mailbox RW */ - -/* ELB Controller Registers */ -#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80) - /* ELB CS0 Configuration Reg */ -#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84) - /* ELB CS0 Base Address Reg */ -#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88) - /* ELB CS0 Mask Register */ -#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C) - /* ELB CS0 access register */ - -#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90) - /* ELB CS1 Configuration Reg */ -#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94) - /* ELB CS1 Base Address Reg */ -#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98) - /* ELB CS1 Mask Register */ -#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C) - /* ELB CS1 access register */ - -#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0) - /* ELB CS2 Configuration Reg */ -#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4) - /* ELB CS2 Base Address Reg */ -#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8) - /* ELB CS2 Mask Register */ -#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC) - /* ELB CS2 access register */ - -#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0) - /* ELB CS3 Configuration Reg */ -#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4) - /* ELB CS3 Base Address Reg */ -#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8) - /* ELB CS3 Mask Register */ -#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC) - /* ELB CS3 access register */ - -#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0) - /* ELB CS4 Configuration Reg */ -#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4) - /* ELB CS4 Base Address Reg */ -#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8) - /* ELB CS4 Mask Register */ -#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC) - /* ELB CS4 access register */ - -#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0) - /* ELB CS5 Configuration Reg */ -#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4) - /* ELB CS5 Base Address Reg */ -#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8) - /* ELB CS5 Mask Register */ -#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC) - /* ELB CS5 access register */ - -/* reserved 0xE0 - 0xE8 */ -#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC) - /* ELB single PC card detect */ - -/* reserved 0xF0 - 0xF8 */ -#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC) - /* SDRAM read/ELB timing Reg */ - -/* Extended UART status registers */ -#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0) - /* UART Status Register 0 */ -#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170) - /* UART Status Register 1 */ - -/* Performance monitoring registers */ -#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140) - /* Performance monitor control */ -#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144) - /* Performance monitor clear */ -#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148) - /* Perf monitor counter high */ -#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C) - /* Perf monitor counter low */ - -/* System control registers */ -#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150) - /* System control register */ -#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154) - /* System Error status 1 */ -#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158) - /* System Error status 2 */ -#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C) - /* System Interrupt config */ - -/* Voice Engine Memory configuration */ -#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C) - /* Voice engine memory config */ - -/* CPU/SLP Error Status registers */ -#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180) - /* CPU/SLP Error status 1 */ -#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184) - /* CPU/SLP Error status 1 */ - -/* Extended GPIO registers */ -#define EXTENDED_GPIO1_REG regptr(MSP_SLP_BASE + 0x188) -#define EXTENDED_GPIO2_REG regptr(MSP_SLP_BASE + 0x18c) -#define EXTENDED_GPIO_REG EXTENDED_GPIO1_REG - /* Backward-compatibility */ - -/* System Error registers */ -#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190) - /* Int status for SLP errors */ -#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194) - /* Int mask for SLP errors */ -#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198) - /* External ELB reset */ -#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C) - /* Boot Status */ - -/* Extended ELB addressing */ -#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0) - /* CS0 Extended address */ -#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4) - /* CS1 Extended address */ -#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8) - /* CS2 Extended address */ -#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC) - /* CS3 Extended address */ -/* reserved 0x1B0 */ -#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4) - /* CS5 Extended address */ - -/* PLL Adjustment registers */ -#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200) - /* PLL0 lock status */ -#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204) - /* PLL Analog reset status */ -#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208) - /* PLL0 Adjustment value */ -#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C) - /* PLL1 Adjustment value */ - -/* - *************************************************************************** - * Peripheral Register definitions * - *************************************************************************** - */ - -/* Peripheral status */ -#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50) - /* Peripheral control register */ -#define PER_STS_REG regptr(MSP_PER_BASE + 0x54) - /* Peripheral status register */ - -/* SPI/MPI Registers */ -#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58) - /* SPI/MPI Tx Size register */ -#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C) - /* SPI/MPI Rx Size register */ -#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60) - /* SPI/MPI Control register */ -#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64) - /* SPI/MPI Chip Select reg */ -#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0) - /* SPI/MPI Core Data reg */ -#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4) - /* SPI/MPI Core Control reg */ -#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8) - /* SPI/MPI Core Status reg */ -#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC) - /* SPI/MPI Core Ssel reg */ -#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0) - /* SPI/MPI Data FIFO reg */ - -/* Peripheral Block Error Registers */ -#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70) - /* Error Bit Status Register */ -#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74) - /* Error Bit Mask Register */ -#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78) - /* Error Header 1 Register */ -#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C) - /* Error Header 2 Register */ - -/* Peripheral Block Interrupt Registers */ -#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80) - /* Interrupt status register */ -#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84) - /* Interrupt Mask Register */ -#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88) - /* GPIO interrupt status reg */ -#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C) - /* GPIO interrupt MASK Reg */ - -/* POLO GPIO registers */ -#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0) - /* Polo GPIO[8:0] data reg */ -#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4) - /* Polo GPIO[7:0] config reg */ -#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8) - /* Polo GPIO[15:8] config reg */ -#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC) - /* Polo GPIO[31:0] output drive */ -#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170) - /* Polo GPIO[23:16] config reg */ -#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174) - /* Polo GPIO[15:9] data reg */ -#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178) - /* Polo GPIO[23:16] data reg */ -#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C) - /* Polo GPIO[31:24] data reg */ -#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180) - /* Polo GPIO[39:32] data reg */ -#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184) - /* Polo GPIO[47:40] data reg */ -#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188) - /* Polo GPIO[54:48] data reg */ -#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* Polo GPIO[31:24] config reg */ -#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190) - /* Polo GPIO[39:32] config reg */ -#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194) - /* Polo GPIO[47:40] config reg */ -#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198) - /* Polo GPIO[54:48] config reg */ -#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C) - /* Polo GPIO[54:32] output drive */ - -/* Generic GPIO registers */ -#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170) - /* GPIO[1:0] data register */ -#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174) - /* GPIO[5:2] data register */ -#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178) - /* GPIO[9:6] data register */ -#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C) - /* GPIO[15:10] data register */ -#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180) - /* GPIO[1:0] config register */ -#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184) - /* GPIO[5:2] config register */ -#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188) - /* GPIO[9:6] config register */ -#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C) - /* GPIO[15:10] config register */ -#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190) - /* GPIO[15:0] output drive */ - -/* - *************************************************************************** - * CPU Interface register definitions * - *************************************************************************** - */ -#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00) - /* PCI-SDRAM queue flush trigger */ -#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04) - /* OCP Error Attribute 1 */ -#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08) - /* OCP Error Attribute 2 */ -#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C) - /* OCP Error Status */ -#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10) - /* CPU policy configuration */ -#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10) - /* Misc configuration options */ - -/* Central Interrupt Controller Registers */ -#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000) - /* Central Interrupt registers */ -#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00) - /* External interrupt config */ -#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04) - /* CIC Interrupt Status */ -#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08) - /* VPE0 Interrupt Mask */ -#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C) - /* VPE1 Interrupt Mask */ -#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10) - /* Thread Context 0 Int Mask */ -#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14) - /* Thread Context 1 Int Mask */ -#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 2 Int Mask */ -#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 3 Int Mask */ -#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18) - /* Thread Context 4 Int Mask */ -#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18) -#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18) -#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18) -#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08) - - -/* - *************************************************************************** - * Memory controller registers * - *************************************************************************** - */ -#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00) -#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00) -#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04) -#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08) - -/* - *************************************************************************** - * PCI controller registers * - *************************************************************************** - */ -#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00) -#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800) -#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c) - -/* - ######################################################################## - # Register content & macro definitions # - ######################################################################## - */ - -/* - *************************************************************************** - * DEV_ID defines * - *************************************************************************** - */ -#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */ -#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */ -#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */ -#define DEV_ID_FAMILY (0xff << 8) /* family ID code */ -#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */ - -#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */ -#define MSP5000_ID (0x50 << 8) -#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */ -#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */ -#define MSP4200_ID (0x42 << 8) -#define MSP4000_ID (0x40 << 8) -#define MSP2XXX_ID (0x20 << 8) -#define MSPZEUS_ID (0x10 << 8) - -#define MSP2004_SUB_ID (0x0 << 16) -#define MSP2005_SUB_ID (0x1 << 16) -#define MSP2006_SUB_ID (0x1 << 16) -#define MSP2007_SUB_ID (0x2 << 16) -#define MSP2010_SUB_ID (0x3 << 16) -#define MSP2015_SUB_ID (0x4 << 16) -#define MSP2020_SUB_ID (0x5 << 16) -#define MSP2100_SUB_ID (0x6 << 16) - -/* - *************************************************************************** - * RESET defines * - *************************************************************************** - */ -#define MSP_GR_RST (0x01 << 0) /* Global reset bit */ -#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */ -#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */ -#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */ -/* reserved */ -#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */ -#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */ -#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */ -#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */ -#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */ -#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */ -#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */ -#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */ -#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */ - -/* - *************************************************************************** - * UART defines * - *************************************************************************** - */ -#define MSP_BASE_BAUD 25000000 -#define MSP_UART_REG_LEN 0x20 - -/* - *************************************************************************** - * ELB defines * - *************************************************************************** - */ -#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */ -#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */ - -/* - *************************************************************************** - * CIC defines * - *************************************************************************** - */ - -/* CIC_EXT_CFG_REG */ -#define EXT_INT_POL(eirq) (1 << (eirq + 8)) -#define EXT_INT_EDGE(eirq) (1 << eirq) - -#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq)) -#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq)) -#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq)) -#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq)) -#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI -#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO - -#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \ - ((reg & EXT_INT_EDGE(eirq)) == 0) -#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq)) -#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq)) -#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \ - ((reg & EXT_INT_POL(eirq)) == 0) -#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI -#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO - -/* - *************************************************************************** - * Memory Controller defines * - *************************************************************************** - */ - -/* Indirect memory controller registers */ -#define DDRC_CFG(n) (n) -#define DDRC_DEBUG(n) (0x04 + n) -#define DDRC_CTL(n) (0x40 + n) - -/* Macro to perform DDRC indirect write */ -#define DDRC_INDIRECT_WRITE(reg, mask, value) \ -({ \ - *MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \ - *MEM_SS_DATA = (value); \ - *MEM_SS_WRITE = 1; \ -}) - -/* - *************************************************************************** - * SPI/MPI Mode * - *************************************************************************** - */ -#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */ -#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */ -#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */ -#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */ - -/* - *************************************************************************** - * SPI/MPI Control Register * - *************************************************************************** - */ -#define SPI_MPI_RX_START 0x00000004 /* Start receive command */ -#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */ -#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */ - -#endif /* !_ASM_MSP_REGS_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h deleted file mode 100644 index 9a763eb5e5f5..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h +++ /dev/null @@ -1,129 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Defines for the MSP interrupt controller. - * - * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. - * Author: Carsten Langgaard, carstenl@mips.com - * - * ######################################################################## - * - * ######################################################################## - */ - -#ifndef _MSP_SLP_INT_H -#define _MSP_SLP_INT_H - -/* - * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded - * hierarchical system. The first level are the direct MIPS interrupts - * and are assigned the interrupt range 0-7. The second level is the SLM - * interrupt controller and is assigned the range 8-39. The third level - * comprises the Peripherial block, the PCI block, the PCI MSI block and - * the SLP. The PCI interrupts and the SLP errors are handled by the - * relevant subsystems so the core interrupt code needs only concern - * itself with the Peripheral block. These are assigned interrupts in - * the range 40-71. - */ - -/* - * IRQs directly connected to CPU - */ -#define MSP_MIPS_INTBASE 0 -#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */ -#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */ -#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */ -#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */ -#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */ -#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */ -#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */ -#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */ - -/* - * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4) - * These defines should be tied to the register definition for the SLM - * interrupt routine. For now, just use hard-coded values. - */ -#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8) -#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0) - /* External interrupt 0 */ -#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1) - /* External interrupt 1 */ -#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2) - /* External interrupt 2 */ -#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3) - /* External interrupt 3 */ -/* Reserved 4-7 */ - -/* - ************************************************************************* - * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER * - * Some MSP produces have this interrupt labelled as Voice and some are * - * SEC mbox ... * - ************************************************************************* - */ -#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8) - /* Cascaded IRQ for Voice Engine*/ -#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9) - /* TDM interrupt */ -#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10) - /* Cascaded IRQ for MAC 0 */ -#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11) - /* Cascaded IRQ for MAC 1 */ -#define MSP_INT_SEC (MSP_SLP_INTBASE + 12) - /* IRQ for security engine */ -#define MSP_INT_PER (MSP_SLP_INTBASE + 13) - /* Peripheral interrupt */ -#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14) - /* SLP timer 0 */ -#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15) - /* SLP timer 1 */ -#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16) - /* SLP timer 2 */ -#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17) - /* Cascaded MIPS timer */ -#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18) - /* Block Copy */ -#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19) - /* UART 0 */ -#define MSP_INT_PCI (MSP_SLP_INTBASE + 20) - /* PCI subsystem */ -#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21) - /* PCI doorbell */ -#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22) - /* PCI Message Signal */ -#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23) - /* PCI Block Copy 0 */ -#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24) - /* PCI Block Copy 1 */ -#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25) - /* SLP error condition */ -#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26) - /* IRQ for MAC2 */ -/* Reserved 26-31 */ - -/* - * IRQs cascaded on SLP PER interrupt (MSP_INT_PER) - */ -#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32) -/* Reserved 0-1 */ -#define MSP_INT_UART1 (MSP_PER_INTBASE + 2) - /* UART 1 */ -/* Reserved 3-5 */ -#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6) - /* 2-wire */ -#define MSP_INT_TM0 (MSP_PER_INTBASE + 7) - /* Peripheral timer block out 0 */ -#define MSP_INT_TM1 (MSP_PER_INTBASE + 8) - /* Peripheral timer block out 1 */ -/* Reserved 9 */ -#define MSP_INT_SPRX (MSP_PER_INTBASE + 10) - /* SPI RX complete */ -#define MSP_INT_SPTX (MSP_PER_INTBASE + 11) - /* SPI TX complete */ -#define MSP_INT_GPIO (MSP_PER_INTBASE + 12) - /* GPIO */ -#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13) - /* Peripheral error */ -/* Reserved 14-31 */ - -#endif /* !_MSP_SLP_INT_H */ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h deleted file mode 100644 index 3cc3edb336b6..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h +++ /dev/null @@ -1,124 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/****************************************************************** - * Copyright (c) 2000-2007 PMC-Sierra INC. - * - * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS - * SOFTWARE. - */ -#ifndef MSP_USB_H_ -#define MSP_USB_H_ - -#define NUM_USB_DEVS 1 - -/* Register spaces for USB host 0 */ -#define MSP_USB0_MAB_START (MSP_USB0_BASE + 0x0) -#define MSP_USB0_MAB_END (MSP_USB0_BASE + 0x17) -#define MSP_USB0_ID_START (MSP_USB0_BASE + 0x40000) -#define MSP_USB0_ID_END (MSP_USB0_BASE + 0x4008f) -#define MSP_USB0_HS_START (MSP_USB0_BASE + 0x40100) -#define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF) - -/* Register spaces for USB host 1 */ -#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0) -#define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17) -#define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000) -#define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f) -#define MSP_USB1_HS_START (MSP_USB1_BASE + 0x40100) -#define MSP_USB1_HS_END (MSP_USB1_BASE + 0x401ff) - -/* USB Identification registers */ -struct msp_usbid_regs { - u32 id; /* 0x0: Identification register */ - u32 hwgen; /* 0x4: General HW params */ - u32 hwhost; /* 0x8: Host HW params */ - u32 hwdev; /* 0xc: Device HW params */ - u32 hwtxbuf; /* 0x10: Tx buffer HW params */ - u32 hwrxbuf; /* 0x14: Rx buffer HW params */ - u32 reserved[26]; - u32 timer0_load; /* 0x80: General-purpose timer 0 load*/ - u32 timer0_ctrl; /* 0x84: General-purpose timer 0 control */ - u32 timer1_load; /* 0x88: General-purpose timer 1 load*/ - u32 timer1_ctrl; /* 0x8c: General-purpose timer 1 control */ -}; - -/* MSBus to AMBA registers */ -struct msp_mab_regs { - u32 isr; /* 0x0: Interrupt status */ - u32 imr; /* 0x4: Interrupt mask */ - u32 thcr0; /* 0x8: Transaction header capture 0 */ - u32 thcr1; /* 0xc: Transaction header capture 1 */ - u32 int_stat; /* 0x10: Interrupt status summary */ - u32 phy_cfg; /* 0x14: USB phy config */ -}; - -/* EHCI registers */ -struct msp_usbhs_regs { - u32 hciver; /* 0x0: Version and offset to operational regs */ - u32 hcsparams; /* 0x4: Host control structural parameters */ - u32 hccparams; /* 0x8: Host control capability parameters */ - u32 reserved0[5]; - u32 dciver; /* 0x20: Device interface version */ - u32 dccparams; /* 0x24: Device control capability parameters */ - u32 reserved1[6]; - u32 cmd; /* 0x40: USB command */ - u32 sts; /* 0x44: USB status */ - u32 int_ena; /* 0x48: USB interrupt enable */ - u32 frindex; /* 0x4c: Frame index */ - u32 reserved3; - union { - struct { - u32 flb_addr; /* 0x54: Frame list base address */ - u32 next_async_addr; /* 0x58: next asynchronous addr */ - u32 ttctrl; /* 0x5c: embedded transaction translator - async buffer status */ - u32 burst_size; /* 0x60: Controller burst size */ - u32 tx_fifo_ctrl; /* 0x64: Tx latency FIFO tuning */ - u32 reserved0[4]; - u32 endpt_nak; /* 0x78: Endpoint NAK */ - u32 endpt_nak_ena; /* 0x7c: Endpoint NAK enable */ - u32 cfg_flag; /* 0x80: Config flag */ - u32 port_sc1; /* 0x84: Port status & control 1 */ - u32 reserved1[7]; - u32 otgsc; /* 0xa4: OTG status & control */ - u32 mode; /* 0xa8: USB controller mode */ - } host; - - struct { - u32 dev_addr; /* 0x54: Device address */ - u32 endpt_list_addr; /* 0x58: Endpoint list address */ - u32 reserved0[7]; - u32 endpt_nak; /* 0x74 */ - u32 endpt_nak_ctrl; /* 0x78 */ - u32 cfg_flag; /* 0x80 */ - u32 port_sc1; /* 0x84: Port status & control 1 */ - u32 reserved[7]; - u32 otgsc; /* 0xa4: OTG status & control */ - u32 mode; /* 0xa8: USB controller mode */ - u32 endpt_setup_stat; /* 0xac */ - u32 endpt_prime; /* 0xb0 */ - u32 endpt_flush; /* 0xb4 */ - u32 endpt_stat; /* 0xb8 */ - u32 endpt_complete; /* 0xbc */ - u32 endpt_ctrl0; /* 0xc0 */ - u32 endpt_ctrl1; /* 0xc4 */ - u32 endpt_ctrl2; /* 0xc8 */ - u32 endpt_ctrl3; /* 0xcc */ - } device; - } u; -}; -/* - * Container for the more-generic platform_device. - * This exists mainly as a way to map the non-standard register - * spaces and make them accessible to the USB ISR. - */ -struct mspusb_device { - struct msp_mab_regs __iomem *mab_regs; - struct msp_usbid_regs __iomem *usbid_regs; - struct msp_usbhs_regs __iomem *usbhs_regs; - struct platform_device dev; -}; - -#define to_mspusb_device(x) container_of((x), struct mspusb_device, dev) -#define TO_HOST_ID(x) ((x) & 0x3) -#endif /*MSP_USB_H_*/ diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/war.h b/arch/mips/include/asm/mach-pmcs-msp71xx/war.h deleted file mode 100644 index 31c546f58bb5..000000000000 --- a/arch/mips/include/asm/mach-pmcs-msp71xx/war.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H -#define __ASM_MIPS_PMC_SIERRA_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \ - defined(CONFIG_PMC_MSP7120_FPGA) -#define MIPS34K_MISSED_ITLB_WAR 1 -#else -#define MIPS34K_MISSED_ITLB_WAR 0 -#endif - -#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */ diff --git a/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h index 6ea5908f0c11..c4579f1705c2 100644 --- a/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h @@ -45,7 +45,6 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h index 65483a4681ab..e1af1ba50bd8 100644 --- a/arch/mips/include/asm/mach-ralink/mt7621.h +++ b/arch/mips/include/asm/mach-ralink/mt7621.h @@ -31,6 +31,4 @@ #define MT7621_CHIP_NAME0 0x3637544D #define MT7621_CHIP_NAME1 0x20203132 -#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) - #endif diff --git a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h index e06f517b2588..168359a0a58d 100644 --- a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h @@ -46,7 +46,6 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 diff --git a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h index 9c069646d0bd..fdaf8c9182bc 100644 --- a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h @@ -44,7 +44,6 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 #define cpu_dcache_line_size() 16 #define cpu_icache_line_size() 16 diff --git a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h index 2e423fd15384..7a385fe784a6 100644 --- a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h @@ -44,7 +44,6 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 diff --git a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h index 7cee0e232580..0a61910f6521 100644 --- a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h @@ -43,7 +43,6 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h index bc46179fdf40..8539ccfb69b7 100644 --- a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h @@ -54,7 +54,6 @@ #define cpu_has_64bits 0 #define cpu_has_64bit_zero_reg 0 #define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 #define cpu_has_inclusive_pcaches 0 diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h index 6f40d1515580..9a6eefd12757 100644 --- a/arch/mips/include/asm/mach-rc32434/pci.h +++ b/arch/mips/include/asm/mach-rc32434/pci.h @@ -319,9 +319,6 @@ struct pci_msu { #define PCIM_H_EA 0x3 #define PCIM_H_IA_FIX 0x4 #define PCIM_H_IA_RR 0x5 -#if 0 -#define PCI_ADDR_START 0x13000000 -#endif #define PCI_ADDR_START 0x50000000 diff --git a/arch/mips/include/asm/mach-tx39xx/ioremap.h b/arch/mips/include/asm/mach-tx39xx/ioremap.h index 077b3c9971f7..157a7292397e 100644 --- a/arch/mips/include/asm/mach-tx39xx/ioremap.h +++ b/arch/mips/include/asm/mach-tx39xx/ioremap.h @@ -7,15 +7,6 @@ #include <linux/types.h> -/* - * Allow physical addresses to be fixed up to help peripherals located - * outside the low 32-bit range -- generic pass-through version. - */ -static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) -{ - return phys_addr; -} - static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size, unsigned long flags) { diff --git a/arch/mips/include/asm/mach-tx49xx/ioremap.h b/arch/mips/include/asm/mach-tx49xx/ioremap.h index c6b9e05f44c4..b1f3710acf8e 100644 --- a/arch/mips/include/asm/mach-tx49xx/ioremap.h +++ b/arch/mips/include/asm/mach-tx49xx/ioremap.h @@ -7,15 +7,6 @@ #include <linux/types.h> -/* - * Allow physical addresses to be fixed up to help peripherals located - * outside the low 32-bit range -- generic pass-through version. - */ -static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size) -{ - return phys_addr; -} - static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size, unsigned long flags) { diff --git a/arch/mips/include/asm/mach-xilfpga/irq.h b/arch/mips/include/asm/mach-xilfpga/irq.h deleted file mode 100644 index 15ad29ec1dee..000000000000 --- a/arch/mips/include/asm/mach-xilfpga/irq.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2015 Imagination Technologies - * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> - */ - -#ifndef __MIPS_ASM_MACH_XILFPGA_IRQ_H__ -#define __MIPS_ASM_MACH_XILFPGA_IRQ_H__ - -#define NR_IRQS 32 - -#include <asm/mach-generic/irq.h> - -#endif /* __MIPS_ASM_MACH_XILFPGA_IRQ_H__ */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 796fe47cfd17..796dbb86575b 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -468,6 +468,7 @@ #define EXCCODE_THREAD 25 /* Thread exceptions (MT) */ #define EXCCODE_DSPDIS 26 /* DSP disabled exception */ #define EXCCODE_GE 27 /* Virtualized guest exception (VZ) */ +#define EXCCODE_CACHEERR 30 /* Parity/ECC occured on a core */ /* Implementation specific trap codes used by MIPS cores */ #define MIPS_EXCCODE_TLBPAR 16 /* TLB parity error exception */ @@ -563,6 +564,17 @@ #define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7) #define MIPS_CONF_AR (_ULCAST_(7) << 10) #define MIPS_CONF_AT (_ULCAST_(3) << 13) +#define MIPS_CONF_BE (_ULCAST_(1) << 15) +#define MIPS_CONF_BM (_ULCAST_(1) << 16) +#define MIPS_CONF_MM (_ULCAST_(3) << 17) +#define MIPS_CONF_MM_SYSAD (_ULCAST_(1) << 17) +#define MIPS_CONF_MM_FULL (_ULCAST_(2) << 17) +#define MIPS_CONF_SB (_ULCAST_(1) << 21) +#define MIPS_CONF_UDI (_ULCAST_(1) << 22) +#define MIPS_CONF_DSP (_ULCAST_(1) << 23) +#define MIPS_CONF_ISP (_ULCAST_(1) << 24) +#define MIPS_CONF_KU (_ULCAST_(3) << 25) +#define MIPS_CONF_K23 (_ULCAST_(3) << 28) #define MIPS_CONF_M (_ULCAST_(1) << 31) /* @@ -674,13 +686,38 @@ #define MIPS_CONF5_CV (_ULCAST_(1) << 29) #define MIPS_CONF5_K (_ULCAST_(1) << 30) -#define MIPS_CONF6_SYND (_ULCAST_(1) << 13) +/* Config6 feature bits for proAptiv/P5600 */ + +/* Jump register cache prediction disable */ +#define MIPS_CONF6_MTI_JRCD (_ULCAST_(1) << 0) +/* MIPSr6 extensions enable */ +#define MIPS_CONF6_MTI_R6 (_ULCAST_(1) << 2) +/* IFU Performance Control */ +#define MIPS_CONF6_MTI_IFUPERFCTL (_ULCAST_(3) << 10) +#define MIPS_CONF6_MTI_SYND (_ULCAST_(1) << 13) +/* Sleep state performance counter disable */ +#define MIPS_CONF6_MTI_SPCD (_ULCAST_(1) << 14) /* proAptiv FTLB on/off bit */ -#define MIPS_CONF6_FTLBEN (_ULCAST_(1) << 15) -/* Loongson-3 FTLB on/off bit */ -#define MIPS_CONF6_FTLBDIS (_ULCAST_(1) << 22) +#define MIPS_CONF6_MTI_FTLBEN (_ULCAST_(1) << 15) +/* Disable load/store bonding */ +#define MIPS_CONF6_MTI_DLSB (_ULCAST_(1) << 21) /* FTLB probability bits */ -#define MIPS_CONF6_FTLBP_SHIFT (16) +#define MIPS_CONF6_MTI_FTLBP_SHIFT (16) + +/* Config6 feature bits for Loongson-3 */ + +/* Loongson-3 internal timer bit */ +#define MIPS_CONF6_LOONGSON_INTIMER (_ULCAST_(1) << 6) +/* Loongson-3 external timer bit */ +#define MIPS_CONF6_LOONGSON_EXTIMER (_ULCAST_(1) << 7) +/* Loongson-3 SFB on/off bit, STFill in manual */ +#define MIPS_CONF6_LOONGSON_SFBEN (_ULCAST_(1) << 8) +/* Loongson-3's LL on exclusive cacheline */ +#define MIPS_CONF6_LOONGSON_LLEXC (_ULCAST_(1) << 16) +/* Loongson-3's SC has a random delay */ +#define MIPS_CONF6_LOONGSON_SCRAND (_ULCAST_(1) << 17) +/* Loongson-3 FTLB on/off bit, VTLBOnly in manual */ +#define MIPS_CONF6_LOONGSON_FTLBDIS (_ULCAST_(1) << 22) #define MIPS_CONF7_WII (_ULCAST_(1) << 31) @@ -753,10 +790,18 @@ /* MAAR bit definitions */ #define MIPS_MAAR_VH (_U64CAST_(1) << 63) -#define MIPS_MAAR_ADDR ((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12) +#define MIPS_MAAR_ADDR GENMASK_ULL(55, 12) #define MIPS_MAAR_ADDR_SHIFT 12 #define MIPS_MAAR_S (_ULCAST_(1) << 1) #define MIPS_MAAR_VL (_ULCAST_(1) << 0) +#ifdef CONFIG_XPA +#define MIPS_MAAR_V (MIPS_MAAR_VH | MIPS_MAAR_VL) +#else +#define MIPS_MAAR_V MIPS_MAAR_VL +#endif +#define MIPS_MAARX_VH (_ULCAST_(1) << 31) +#define MIPS_MAARX_ADDR 0xF +#define MIPS_MAARX_ADDR_SHIFT 32 /* MAARI bit definitions */ #define MIPS_MAARI_INDEX (_ULCAST_(0x3f) << 0) @@ -997,6 +1042,8 @@ #define LOONGSON_DIAG_ITLB (_ULCAST_(1) << 2) /* Flush DTLB */ #define LOONGSON_DIAG_DTLB (_ULCAST_(1) << 3) +/* Allow some CACHE instructions (CACHE0, 1, 3, 21 and 23) in user mode */ +#define LOONGSON_DIAG_UCAC (_ULCAST_(1) << 8) /* Flush VTLB */ #define LOONGSON_DIAG_VTLB (_ULCAST_(1) << 12) /* Flush FTLB */ @@ -1717,6 +1764,8 @@ do { \ #define write_c0_lladdr(val) __write_ulong_c0_register($17, 0, val) #define read_c0_maar() __read_ulong_c0_register($17, 1) #define write_c0_maar(val) __write_ulong_c0_register($17, 1, val) +#define readx_c0_maar() __readx_32bit_c0_register($17, 1) +#define writex_c0_maar(val) __writex_32bit_c0_register($17, 1, val) #define read_c0_maari() __read_32bit_c0_register($17, 2) #define write_c0_maari(val) __write_32bit_c0_register($17, 2, val) diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h deleted file mode 100644 index 9d36b7823603..000000000000 --- a/arch/mips/include/asm/nile4.h +++ /dev/null @@ -1,310 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@linux-m68k.org> - * Sony Software Development Center Europe (SDCE), Brussels - * - * This file is based on the following documentation: - * - * NEC Vrc 5074 System Controller Data Sheet, June 1998 - */ - -#ifndef _ASM_NILE4_H -#define _ASM_NILE4_H - -#define NILE4_BASE 0xbfa00000 -#define NILE4_SIZE 0x00200000 /* 2 MB */ - - - /* - * Physical Device Address Registers (PDARs) - */ - -#define NILE4_SDRAM0 0x0000 /* SDRAM Bank 0 [R/W] */ -#define NILE4_SDRAM1 0x0008 /* SDRAM Bank 1 [R/W] */ -#define NILE4_DCS2 0x0010 /* Device Chip-Select 2 [R/W] */ -#define NILE4_DCS3 0x0018 /* Device Chip-Select 3 [R/W] */ -#define NILE4_DCS4 0x0020 /* Device Chip-Select 4 [R/W] */ -#define NILE4_DCS5 0x0028 /* Device Chip-Select 5 [R/W] */ -#define NILE4_DCS6 0x0030 /* Device Chip-Select 6 [R/W] */ -#define NILE4_DCS7 0x0038 /* Device Chip-Select 7 [R/W] */ -#define NILE4_DCS8 0x0040 /* Device Chip-Select 8 [R/W] */ -#define NILE4_PCIW0 0x0060 /* PCI Address Window 0 [R/W] */ -#define NILE4_PCIW1 0x0068 /* PCI Address Window 1 [R/W] */ -#define NILE4_INTCS 0x0070 /* Controller Internal Registers and Devices */ - /* [R/W] */ -#define NILE4_BOOTCS 0x0078 /* Boot ROM Chip-Select [R/W] */ - - - /* - * CPU Interface Registers - */ - -#define NILE4_CPUSTAT 0x0080 /* CPU Status [R/W] */ -#define NILE4_INTCTRL 0x0088 /* Interrupt Control [R/W] */ -#define NILE4_INTSTAT0 0x0090 /* Interrupt Status 0 [R] */ -#define NILE4_INTSTAT1 0x0098 /* Interrupt Status 1 and CPU Interrupt */ - /* Enable [R/W] */ -#define NILE4_INTCLR 0x00A0 /* Interrupt Clear [R/W] */ -#define NILE4_INTPPES 0x00A8 /* PCI Interrupt Control [R/W] */ - - - /* - * Memory-Interface Registers - */ - -#define NILE4_MEMCTRL 0x00C0 /* Memory Control */ -#define NILE4_ACSTIME 0x00C8 /* Memory Access Timing [R/W] */ -#define NILE4_CHKERR 0x00D0 /* Memory Check Error Status [R] */ - - - /* - * PCI-Bus Registers - */ - -#define NILE4_PCICTRL 0x00E0 /* PCI Control [R/W] */ -#define NILE4_PCIARB 0x00E8 /* PCI Arbiter [R/W] */ -#define NILE4_PCIINIT0 0x00F0 /* PCI Master (Initiator) 0 [R/W] */ -#define NILE4_PCIINIT1 0x00F8 /* PCI Master (Initiator) 1 [R/W] */ -#define NILE4_PCIERR 0x00B8 /* PCI Error [R/W] */ - - - /* - * Local-Bus Registers - */ - -#define NILE4_LCNFG 0x0100 /* Local Bus Configuration [R/W] */ -#define NILE4_LCST2 0x0110 /* Local Bus Chip-Select Timing 2 [R/W] */ -#define NILE4_LCST3 0x0118 /* Local Bus Chip-Select Timing 3 [R/W] */ -#define NILE4_LCST4 0x0120 /* Local Bus Chip-Select Timing 4 [R/W] */ -#define NILE4_LCST5 0x0128 /* Local Bus Chip-Select Timing 5 [R/W] */ -#define NILE4_LCST6 0x0130 /* Local Bus Chip-Select Timing 6 [R/W] */ -#define NILE4_LCST7 0x0138 /* Local Bus Chip-Select Timing 7 [R/W] */ -#define NILE4_LCST8 0x0140 /* Local Bus Chip-Select Timing 8 [R/W] */ -#define NILE4_DCSFN 0x0150 /* Device Chip-Select Muxing and Output */ - /* Enables [R/W] */ -#define NILE4_DCSIO 0x0158 /* Device Chip-Selects As I/O Bits [R/W] */ -#define NILE4_BCST 0x0178 /* Local Boot Chip-Select Timing [R/W] */ - - - /* - * DMA Registers - */ - -#define NILE4_DMACTRL0 0x0180 /* DMA Control 0 [R/W] */ -#define NILE4_DMASRCA0 0x0188 /* DMA Source Address 0 [R/W] */ -#define NILE4_DMADESA0 0x0190 /* DMA Destination Address 0 [R/W] */ -#define NILE4_DMACTRL1 0x0198 /* DMA Control 1 [R/W] */ -#define NILE4_DMASRCA1 0x01A0 /* DMA Source Address 1 [R/W] */ -#define NILE4_DMADESA1 0x01A8 /* DMA Destination Address 1 [R/W] */ - - - /* - * Timer Registers - */ - -#define NILE4_T0CTRL 0x01C0 /* SDRAM Refresh Control [R/W] */ -#define NILE4_T0CNTR 0x01C8 /* SDRAM Refresh Counter [R/W] */ -#define NILE4_T1CTRL 0x01D0 /* CPU-Bus Read Time-Out Control [R/W] */ -#define NILE4_T1CNTR 0x01D8 /* CPU-Bus Read Time-Out Counter [R/W] */ -#define NILE4_T2CTRL 0x01E0 /* General-Purpose Timer Control [R/W] */ -#define NILE4_T2CNTR 0x01E8 /* General-Purpose Timer Counter [R/W] */ -#define NILE4_T3CTRL 0x01F0 /* Watchdog Timer Control [R/W] */ -#define NILE4_T3CNTR 0x01F8 /* Watchdog Timer Counter [R/W] */ - - - /* - * PCI Configuration Space Registers - */ - -#define NILE4_PCI_BASE 0x0200 - -#define NILE4_VID 0x0200 /* PCI Vendor ID [R] */ -#define NILE4_DID 0x0202 /* PCI Device ID [R] */ -#define NILE4_PCICMD 0x0204 /* PCI Command [R/W] */ -#define NILE4_PCISTS 0x0206 /* PCI Status [R/W] */ -#define NILE4_REVID 0x0208 /* PCI Revision ID [R] */ -#define NILE4_CLASS 0x0209 /* PCI Class Code [R] */ -#define NILE4_CLSIZ 0x020C /* PCI Cache Line Size [R/W] */ -#define NILE4_MLTIM 0x020D /* PCI Latency Timer [R/W] */ -#define NILE4_HTYPE 0x020E /* PCI Header Type [R] */ -#define NILE4_BIST 0x020F /* BIST [R] (unimplemented) */ -#define NILE4_BARC 0x0210 /* PCI Base Address Register Control [R/W] */ -#define NILE4_BAR0 0x0218 /* PCI Base Address Register 0 [R/W] */ -#define NILE4_BAR1 0x0220 /* PCI Base Address Register 1 [R/W] */ -#define NILE4_CIS 0x0228 /* PCI Cardbus CIS Pointer [R] */ - /* (unimplemented) */ -#define NILE4_SSVID 0x022C /* PCI Sub-System Vendor ID [R/W] */ -#define NILE4_SSID 0x022E /* PCI Sub-System ID [R/W] */ -#define NILE4_ROM 0x0230 /* Expansion ROM Base Address [R] */ - /* (unimplemented) */ -#define NILE4_INTLIN 0x023C /* PCI Interrupt Line [R/W] */ -#define NILE4_INTPIN 0x023D /* PCI Interrupt Pin [R] */ -#define NILE4_MINGNT 0x023E /* PCI Min_Gnt [R] (unimplemented) */ -#define NILE4_MAXLAT 0x023F /* PCI Max_Lat [R] (unimplemented) */ -#define NILE4_BAR2 0x0240 /* PCI Base Address Register 2 [R/W] */ -#define NILE4_BAR3 0x0248 /* PCI Base Address Register 3 [R/W] */ -#define NILE4_BAR4 0x0250 /* PCI Base Address Register 4 [R/W] */ -#define NILE4_BAR5 0x0258 /* PCI Base Address Register 5 [R/W] */ -#define NILE4_BAR6 0x0260 /* PCI Base Address Register 6 [R/W] */ -#define NILE4_BAR7 0x0268 /* PCI Base Address Register 7 [R/W] */ -#define NILE4_BAR8 0x0270 /* PCI Base Address Register 8 [R/W] */ -#define NILE4_BARB 0x0278 /* PCI Base Address Register BOOT [R/W] */ - - - /* - * Serial-Port Registers - */ - -#define NILE4_UART_BASE 0x0300 - -#define NILE4_UARTRBR 0x0300 /* UART Receiver Data Buffer [R] */ -#define NILE4_UARTTHR 0x0300 /* UART Transmitter Data Holding [W] */ -#define NILE4_UARTIER 0x0308 /* UART Interrupt Enable [R/W] */ -#define NILE4_UARTDLL 0x0300 /* UART Divisor Latch LSB [R/W] */ -#define NILE4_UARTDLM 0x0308 /* UART Divisor Latch MSB [R/W] */ -#define NILE4_UARTIIR 0x0310 /* UART Interrupt ID [R] */ -#define NILE4_UARTFCR 0x0310 /* UART FIFO Control [W] */ -#define NILE4_UARTLCR 0x0318 /* UART Line Control [R/W] */ -#define NILE4_UARTMCR 0x0320 /* UART Modem Control [R/W] */ -#define NILE4_UARTLSR 0x0328 /* UART Line Status [R/W] */ -#define NILE4_UARTMSR 0x0330 /* UART Modem Status [R/W] */ -#define NILE4_UARTSCR 0x0338 /* UART Scratch [R/W] */ - -#define NILE4_UART_BASE_BAUD 520833 /* 100 MHz / 12 / 16 */ - - - /* - * Interrupt Lines - */ - -#define NILE4_INT_CPCE 0 /* CPU-Interface Parity-Error Interrupt */ -#define NILE4_INT_CNTD 1 /* CPU No-Target Decode Interrupt */ -#define NILE4_INT_MCE 2 /* Memory-Check Error Interrupt */ -#define NILE4_INT_DMA 3 /* DMA Controller Interrupt */ -#define NILE4_INT_UART 4 /* UART Interrupt */ -#define NILE4_INT_WDOG 5 /* Watchdog Timer Interrupt */ -#define NILE4_INT_GPT 6 /* General-Purpose Timer Interrupt */ -#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */ -#define NILE4_INT_INTA 8 /* PCI Interrupt Signal INTA# */ -#define NILE4_INT_INTB 9 /* PCI Interrupt Signal INTB# */ -#define NILE4_INT_INTC 10 /* PCI Interrupt Signal INTC# */ -#define NILE4_INT_INTD 11 /* PCI Interrupt Signal INTD# */ -#define NILE4_INT_INTE 12 /* PCI Interrupt Signal INTE# (ISA cascade) */ -#define NILE4_INT_RESV 13 /* Reserved */ -#define NILE4_INT_PCIS 14 /* PCI SERR# Interrupt */ -#define NILE4_INT_PCIE 15 /* PCI Internal Error Interrupt */ - - - /* - * Nile 4 Register Access - */ - -static inline void nile4_sync(void) -{ - volatile u32 *p = (volatile u32 *)0xbfc00000; - (void)(*p); -} - -static inline void nile4_out32(u32 offset, u32 val) -{ - *(volatile u32 *)(NILE4_BASE+offset) = val; - nile4_sync(); -} - -static inline u32 nile4_in32(u32 offset) -{ - u32 val = *(volatile u32 *)(NILE4_BASE+offset); - nile4_sync(); - return val; -} - -static inline void nile4_out16(u32 offset, u16 val) -{ - *(volatile u16 *)(NILE4_BASE+offset) = val; - nile4_sync(); -} - -static inline u16 nile4_in16(u32 offset) -{ - u16 val = *(volatile u16 *)(NILE4_BASE+offset); - nile4_sync(); - return val; -} - -static inline void nile4_out8(u32 offset, u8 val) -{ - *(volatile u8 *)(NILE4_BASE+offset) = val; - nile4_sync(); -} - -static inline u8 nile4_in8(u32 offset) -{ - u8 val = *(volatile u8 *)(NILE4_BASE+offset); - nile4_sync(); - return val; -} - - - /* - * Physical Device Address Registers - */ - -extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width, - int on_memory_bus, int visible); - - - /* - * PCI Master Registers - */ - -#define NILE4_PCICMD_IACK 0 /* PCI Interrupt Acknowledge */ -#define NILE4_PCICMD_IO 1 /* PCI I/O Space */ -#define NILE4_PCICMD_MEM 3 /* PCI Memory Space */ -#define NILE4_PCICMD_CFG 5 /* PCI Configuration Space */ - - - /* - * PCI Address Spaces - * - * Note that these are multiplexed using PCIINIT[01]! - */ - -#define NILE4_PCI_IO_BASE 0xa6000000 -#define NILE4_PCI_MEM_BASE 0xa8000000 -#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE -#define NILE4_PCI_IACK_BASE NILE4_PCI_IO_BASE - - -extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr); - - - /* - * Interrupt Programming - */ - -#define NUM_I8259_INTERRUPTS 16 -#define NUM_NILE4_INTERRUPTS 16 - -#define IRQ_I8259_CASCADE NILE4_INT_INTE -#define is_i8259_irq(irq) ((irq) < NUM_I8259_INTERRUPTS) -#define nile4_to_irq(n) ((n)+NUM_I8259_INTERRUPTS) -#define irq_to_nile4(n) ((n)-NUM_I8259_INTERRUPTS) - -extern void nile4_map_irq(int nile4_irq, int cpu_irq); -extern void nile4_map_irq_all(int cpu_irq); -extern void nile4_enable_irq(unsigned int nile4_irq); -extern void nile4_disable_irq(unsigned int nile4_irq); -extern void nile4_disable_irq_all(void); -extern u16 nile4_get_irq_stat(int cpu_irq); -extern void nile4_enable_irq_output(int cpu_irq); -extern void nile4_disable_irq_output(int cpu_irq); -extern void nile4_set_pci_irq_polarity(int pci_irq, int high); -extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level); -extern void nile4_clear_irq(int nile4_irq); -extern void nile4_clear_irq_mask(u32 mask); -extern u8 nile4_i8259_iack(void); -extern void nile4_dump_irq_status(void); /* Debug */ - -#endif diff --git a/arch/mips/include/asm/octeon/cvmx-sli-defs.h b/arch/mips/include/asm/octeon/cvmx-sli-defs.h index cbc7cdae1c6a..5ef6c38150f5 100644 --- a/arch/mips/include/asm/octeon/cvmx-sli-defs.h +++ b/arch/mips/include/asm/octeon/cvmx-sli-defs.h @@ -46,7 +46,7 @@ static inline uint64_t CVMX_SLI_PCIE_MSI_RCV_FUNC(void) case OCTEON_CN78XX & OCTEON_FAMILY_MASK: if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X)) return 0x0000000000003CB0ull; - /* Else, fall through */ + fallthrough; default: return 0x0000000000023CB0ull; } diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index e2f503fc7a84..6a77bc4a6eec 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -49,7 +49,7 @@ static inline unsigned int page_size_ftlb(unsigned int mmuextdef) return 6; if (PAGE_SIZE > (256 << 10)) return 7; /* reserved */ - /* fall through */ + fallthrough; case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT: return (PAGE_SHIFT - 10) / 2; default: diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index f92716cfa4f4..ee5dc0c145b9 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -172,6 +172,8 @@ extern pte_t invalid_pte_table[PTRS_PER_PTE]; +#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)) + #ifndef __PAGETABLE_PUD_FOLDED /* * For 4-level pagetables we defines these ourselves, for 3-level the @@ -210,8 +212,6 @@ static inline void p4d_clear(p4d_t *p4dp) p4d_val(*p4dp) = (unsigned long)invalid_pud_table; } -#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)) - static inline unsigned long p4d_page_vaddr(p4d_t p4d) { return p4d_val(p4d); diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h index 4da79b85c179..e26dc41a8a68 100644 --- a/arch/mips/include/asm/pgtable-bits.h +++ b/arch/mips/include/asm/pgtable-bits.h @@ -55,6 +55,9 @@ enum pgtable_bits { #if defined(CONFIG_ARCH_HAS_PTE_SPECIAL) _PAGE_SPECIAL_SHIFT, #endif +#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY) + _PAGE_SOFT_DIRTY_SHIFT, +#endif }; /* @@ -84,6 +87,9 @@ enum pgtable_bits { #if defined(CONFIG_ARCH_HAS_PTE_SPECIAL) _PAGE_SPECIAL_SHIFT, #endif +#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY) + _PAGE_SOFT_DIRTY_SHIFT, +#endif }; #elif defined(CONFIG_CPU_R3K_TLB) @@ -99,6 +105,9 @@ enum pgtable_bits { #if defined(CONFIG_ARCH_HAS_PTE_SPECIAL) _PAGE_SPECIAL_SHIFT, #endif +#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY) + _PAGE_SOFT_DIRTY_SHIFT, +#endif /* Used by TLB hardware (placed in EntryLo) */ _PAGE_GLOBAL_SHIFT = 8, @@ -125,7 +134,9 @@ enum pgtable_bits { #if defined(CONFIG_ARCH_HAS_PTE_SPECIAL) _PAGE_SPECIAL_SHIFT, #endif - +#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY) + _PAGE_SOFT_DIRTY_SHIFT, +#endif /* Used by TLB hardware (placed in EntryLo*) */ #if defined(CONFIG_CPU_HAS_RIXI) _PAGE_NO_EXEC_SHIFT, @@ -152,6 +163,11 @@ enum pgtable_bits { #else # define _PAGE_SPECIAL 0 #endif +#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY) +# define _PAGE_SOFT_DIRTY (1 << _PAGE_SOFT_DIRTY_SHIFT) +#else +# define _PAGE_SOFT_DIRTY 0 +#endif /* Used by TLB hardware (placed in EntryLo*) */ #if defined(CONFIG_XPA) @@ -269,6 +285,6 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val) #define __WRITEABLE (_PAGE_SILENT_WRITE | _PAGE_WRITE | _PAGE_MODIFIED) #define _PAGE_CHG_MASK (_PAGE_ACCESSED | _PAGE_MODIFIED | \ - _PFN_MASK | _CACHE_MASK) + _PAGE_SOFT_DIRTY | _PFN_MASK | _CACHE_MASK) #endif /* _ASM_PGTABLE_BITS_H */ diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index f1801e7a4b15..85b39c9fd09e 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -400,7 +400,7 @@ static inline pte_t pte_mkwrite(pte_t pte) static inline pte_t pte_mkdirty(pte_t pte) { - pte_val(pte) |= _PAGE_MODIFIED; + pte_val(pte) |= _PAGE_MODIFIED | _PAGE_SOFT_DIRTY; if (pte_val(pte) & _PAGE_WRITE) pte_val(pte) |= _PAGE_SILENT_WRITE; return pte; @@ -414,6 +414,8 @@ static inline pte_t pte_mkyoung(pte_t pte) return pte; } +#define pte_sw_mkyoung pte_mkyoung + #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT static inline int pte_huge(pte_t pte) { return pte_val(pte) & _PAGE_HUGE; } @@ -423,6 +425,30 @@ static inline pte_t pte_mkhuge(pte_t pte) return pte; } #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */ + +#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY +static inline bool pte_soft_dirty(pte_t pte) +{ + return pte_val(pte) & _PAGE_SOFT_DIRTY; +} +#define pte_swp_soft_dirty pte_soft_dirty + +static inline pte_t pte_mksoft_dirty(pte_t pte) +{ + pte_val(pte) |= _PAGE_SOFT_DIRTY; + return pte; +} +#define pte_swp_mksoft_dirty pte_mksoft_dirty + +static inline pte_t pte_clear_soft_dirty(pte_t pte) +{ + pte_val(pte) &= ~(_PAGE_SOFT_DIRTY); + return pte; +} +#define pte_swp_clear_soft_dirty pte_clear_soft_dirty + +#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */ + #endif /* @@ -454,6 +480,31 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot) return __pgprot(prot); } +static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma, + unsigned long address) +{ +} + +#define __HAVE_ARCH_PTE_SAME +static inline int pte_same(pte_t pte_a, pte_t pte_b) +{ + return pte_val(pte_a) == pte_val(pte_b); +} + +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +static inline int ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep, + pte_t entry, int dirty) +{ + if (!pte_same(*ptep, entry)) + set_pte_at(vma->vm_mm, address, ptep, entry); + /* + * update_mmu_cache will unconditionally execute, handling both + * the case that the PTE changed and the spurious fault case. + */ + return true; +} + /* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. @@ -481,8 +532,11 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #else static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - return __pte((pte_val(pte) & _PAGE_CHG_MASK) | - (pgprot_val(newprot) & ~_PAGE_CHG_MASK)); + pte_val(pte) &= _PAGE_CHG_MASK; + pte_val(pte) |= pgprot_val(newprot) & ~_PAGE_CHG_MASK; + if ((pte_val(pte) & _PAGE_ACCESSED) && !(pte_val(pte) & _PAGE_NO_READ)) + pte_val(pte) |= _PAGE_SILENT_READ; + return pte; } #endif @@ -497,6 +551,9 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, __update_tlb(vma, address, pte); } +#define __HAVE_ARCH_UPDATE_MMU_TLB +#define update_mmu_tlb update_mmu_cache + static inline void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp) { @@ -507,20 +564,17 @@ static inline void update_mmu_cache_pmd(struct vm_area_struct *vma, #define kern_addr_valid(addr) (1) -#ifdef CONFIG_PHYS_ADDR_T_64BIT -extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot); - -static inline int io_remap_pfn_range(struct vm_area_struct *vma, - unsigned long vaddr, - unsigned long pfn, - unsigned long size, - pgprot_t prot) -{ - phys_addr_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size); - return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot); -} +/* + * Allow physical addresses to be fixed up to help 36-bit peripherals. + */ +#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR +phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size); +int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr, + unsigned long pfn, unsigned long size, pgprot_t prot); #define io_remap_pfn_range io_remap_pfn_range -#endif +#else +#define fixup_bigphys_addr(addr, size) (addr) +#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */ #ifdef CONFIG_TRANSPARENT_HUGEPAGE @@ -579,7 +633,7 @@ static inline pmd_t pmd_mkclean(pmd_t pmd) static inline pmd_t pmd_mkdirty(pmd_t pmd) { - pmd_val(pmd) |= _PAGE_MODIFIED; + pmd_val(pmd) |= _PAGE_MODIFIED | _PAGE_SOFT_DIRTY; if (pmd_val(pmd) & _PAGE_WRITE) pmd_val(pmd) |= _PAGE_SILENT_WRITE; @@ -608,6 +662,26 @@ static inline pmd_t pmd_mkyoung(pmd_t pmd) return pmd; } +#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY +static inline int pmd_soft_dirty(pmd_t pmd) +{ + return !!(pmd_val(pmd) & _PAGE_SOFT_DIRTY); +} + +static inline pmd_t pmd_mksoft_dirty(pmd_t pmd) +{ + pmd_val(pmd) |= _PAGE_SOFT_DIRTY; + return pmd; +} + +static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd) +{ + pmd_val(pmd) &= ~(_PAGE_SOFT_DIRTY); + return pmd; +} + +#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */ + /* Extern to avoid header file madness */ extern pmd_t mk_pmd(struct page *page, pgprot_t prot); diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index 7990c1c70471..5d9ff61004ca 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -125,7 +125,7 @@ static inline void arch_send_call_function_single_ipi(int cpu) { extern const struct plat_smp_ops *mp_ops; /* private */ - mp_ops->send_ipi_mask(cpumask_of(cpu), SMP_CALL_FUNCTION); + mp_ops->send_ipi_single(cpu, SMP_CALL_FUNCTION); } static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask) diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index 4d6ad907ae54..3e8d2aaf96af 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -424,7 +424,7 @@ .macro RESTORE_SP_AND_RET docfi=0 RESTORE_SP \docfi -#ifdef CONFIG_CPU_MIPSR6 +#if defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) eretnc #else .set push diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h index 09cbe9042828..0b0a93bf83cd 100644 --- a/arch/mips/include/asm/switch_to.h +++ b/arch/mips/include/asm/switch_to.h @@ -67,11 +67,11 @@ do { \ #endif /* - * Clear LLBit during context switches on MIPSr6 such that eretnc can be used + * Clear LLBit during context switches on MIPSr5+ such that eretnc can be used * unconditionally when returning to userland in entry.S. */ -#define __clear_r6_hw_ll_bit() do { \ - if (cpu_has_mips_r6) \ +#define __clear_r5_hw_ll_bit() do { \ + if (cpu_has_mips_r5 || cpu_has_mips_r6) \ write_c0_lladdr(0); \ } while (0) @@ -129,7 +129,7 @@ do { \ } \ clear_c0_status(ST0_CU2); \ } \ - __clear_r6_hw_ll_bit(); \ + __clear_r5_hw_ll_bit(); \ __clear_software_ll_bit(); \ if (cpu_has_userlocal) \ write_c0_userlocal(task_thread_info(next)->tp_value); \ diff --git a/arch/mips/include/asm/unaligned-emul.h b/arch/mips/include/asm/unaligned-emul.h new file mode 100644 index 000000000000..2022b18944b9 --- /dev/null +++ b/arch/mips/include/asm/unaligned-emul.h @@ -0,0 +1,779 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_MIPS_UNALIGNED_EMUL_H +#define _ASM_MIPS_UNALIGNED_EMUL_H + +#include <asm/asm.h> + +#ifdef __BIG_ENDIAN +#define _LoadHW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ (".set\tnoat\n" \ + "1:\t"type##_lb("%0", "0(%2)")"\n" \ + "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + "3:\t.set\tat\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR +#define _LoadW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + "1:\t"type##_lwl("%0", "(%2)")"\n" \ + "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\ + "li\t%1, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ +/* For CPUs without lwl instruction */ +#define _LoadW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n" \ + ".set\tnoat\n\t" \ + "1:"type##_lb("%0", "0(%2)")"\n\t" \ + "2:"type##_lbu("$1", "1(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "3:"type##_lbu("$1", "2(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "4:"type##_lbu("$1", "3(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + ".set\tpop\n" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%1, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ + +#define _LoadHWU(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tnoat\n" \ + "1:\t"type##_lbu("%0", "0(%2)")"\n" \ + "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".set\tat\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR +#define _LoadWU(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + "1:\t"type##_lwl("%0", "(%2)")"\n" \ + "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\ + "dsll\t%0, %0, 32\n\t" \ + "dsrl\t%0, %0, 32\n\t" \ + "li\t%1, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + "\t.section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#define _LoadDW(addr, value, res) \ +do { \ + __asm__ __volatile__ ( \ + "1:\tldl\t%0, (%2)\n" \ + "2:\tldr\t%0, 7(%2)\n\t" \ + "li\t%1, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + "\t.section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ +/* For CPUs without lwl and ldl instructions */ +#define _LoadWU(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n\t" \ + ".set\tnoat\n\t" \ + "1:"type##_lbu("%0", "0(%2)")"\n\t" \ + "2:"type##_lbu("$1", "1(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "3:"type##_lbu("$1", "2(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "4:"type##_lbu("$1", "3(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + ".set\tpop\n" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%1, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#define _LoadDW(addr, value, res) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n\t" \ + ".set\tnoat\n\t" \ + "1:lb\t%0, 0(%2)\n\t" \ + "2:lbu\t $1, 1(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "3:lbu\t$1, 2(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "4:lbu\t$1, 3(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "5:lbu\t$1, 4(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "6:lbu\t$1, 5(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "7:lbu\t$1, 6(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "8:lbu\t$1, 7(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + ".set\tpop\n\t" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%1, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + STR(PTR)"\t5b, 11b\n\t" \ + STR(PTR)"\t6b, 11b\n\t" \ + STR(PTR)"\t7b, 11b\n\t" \ + STR(PTR)"\t8b, 11b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ + + +#define _StoreHW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tnoat\n" \ + "1:\t"type##_sb("%1", "1(%2)")"\n" \ + "srl\t$1, %1, 0x8\n" \ + "2:\t"type##_sb("$1", "0(%2)")"\n" \ + ".set\tat\n\t" \ + "li\t%0, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%0, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT));\ +} while (0) + +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR +#define _StoreW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + "1:\t"type##_swl("%1", "(%2)")"\n" \ + "2:\t"type##_swr("%1", "3(%2)")"\n\t"\ + "li\t%0, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%0, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#define _StoreDW(addr, value, res) \ +do { \ + __asm__ __volatile__ ( \ + "1:\tsdl\t%1,(%2)\n" \ + "2:\tsdr\t%1, 7(%2)\n\t" \ + "li\t%0, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%0, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ +#define _StoreW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n\t" \ + ".set\tnoat\n\t" \ + "1:"type##_sb("%1", "3(%2)")"\n\t" \ + "srl\t$1, %1, 0x8\n\t" \ + "2:"type##_sb("$1", "2(%2)")"\n\t" \ + "srl\t$1, $1, 0x8\n\t" \ + "3:"type##_sb("$1", "1(%2)")"\n\t" \ + "srl\t$1, $1, 0x8\n\t" \ + "4:"type##_sb("$1", "0(%2)")"\n\t" \ + ".set\tpop\n\t" \ + "li\t%0, 0\n" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%0, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + ".previous" \ + : "=&r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT) \ + : "memory"); \ +} while (0) + +#define _StoreDW(addr, value, res) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n\t" \ + ".set\tnoat\n\t" \ + "1:sb\t%1, 7(%2)\n\t" \ + "dsrl\t$1, %1, 0x8\n\t" \ + "2:sb\t$1, 6(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "3:sb\t$1, 5(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "4:sb\t$1, 4(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "5:sb\t$1, 3(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "6:sb\t$1, 2(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "7:sb\t$1, 1(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "8:sb\t$1, 0(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + ".set\tpop\n\t" \ + "li\t%0, 0\n" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%0, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + STR(PTR)"\t5b, 11b\n\t" \ + STR(PTR)"\t6b, 11b\n\t" \ + STR(PTR)"\t7b, 11b\n\t" \ + STR(PTR)"\t8b, 11b\n\t" \ + ".previous" \ + : "=&r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT) \ + : "memory"); \ +} while (0) + +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ + +#else /* __BIG_ENDIAN */ + +#define _LoadHW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ (".set\tnoat\n" \ + "1:\t"type##_lb("%0", "1(%2)")"\n" \ + "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + "3:\t.set\tat\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR +#define _LoadW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + "1:\t"type##_lwl("%0", "3(%2)")"\n" \ + "2:\t"type##_lwr("%0", "(%2)")"\n\t"\ + "li\t%1, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ +/* For CPUs without lwl instruction */ +#define _LoadW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n" \ + ".set\tnoat\n\t" \ + "1:"type##_lb("%0", "3(%2)")"\n\t" \ + "2:"type##_lbu("$1", "2(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "3:"type##_lbu("$1", "1(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "4:"type##_lbu("$1", "0(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + ".set\tpop\n" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%1, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ + + +#define _LoadHWU(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tnoat\n" \ + "1:\t"type##_lbu("%0", "1(%2)")"\n" \ + "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".set\tat\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR +#define _LoadWU(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + "1:\t"type##_lwl("%0", "3(%2)")"\n" \ + "2:\t"type##_lwr("%0", "(%2)")"\n\t"\ + "dsll\t%0, %0, 32\n\t" \ + "dsrl\t%0, %0, 32\n\t" \ + "li\t%1, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + "\t.section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#define _LoadDW(addr, value, res) \ +do { \ + __asm__ __volatile__ ( \ + "1:\tldl\t%0, 7(%2)\n" \ + "2:\tldr\t%0, (%2)\n\t" \ + "li\t%1, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + "\t.section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%1, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ +/* For CPUs without lwl and ldl instructions */ +#define _LoadWU(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n\t" \ + ".set\tnoat\n\t" \ + "1:"type##_lbu("%0", "3(%2)")"\n\t" \ + "2:"type##_lbu("$1", "2(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "3:"type##_lbu("$1", "1(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "4:"type##_lbu("$1", "0(%2)")"\n\t" \ + "sll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + ".set\tpop\n" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%1, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#define _LoadDW(addr, value, res) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n\t" \ + ".set\tnoat\n\t" \ + "1:lb\t%0, 7(%2)\n\t" \ + "2:lbu\t$1, 6(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "3:lbu\t$1, 5(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "4:lbu\t$1, 4(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "5:lbu\t$1, 3(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "6:lbu\t$1, 2(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "7:lbu\t$1, 1(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "8:lbu\t$1, 0(%2)\n\t" \ + "dsll\t%0, 0x8\n\t" \ + "or\t%0, $1\n\t" \ + "li\t%1, 0\n" \ + ".set\tpop\n\t" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%1, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + STR(PTR)"\t5b, 11b\n\t" \ + STR(PTR)"\t6b, 11b\n\t" \ + STR(PTR)"\t7b, 11b\n\t" \ + STR(PTR)"\t8b, 11b\n\t" \ + ".previous" \ + : "=&r" (value), "=r" (res) \ + : "r" (addr), "i" (-EFAULT)); \ +} while (0) +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ + +#define _StoreHW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tnoat\n" \ + "1:\t"type##_sb("%1", "0(%2)")"\n" \ + "srl\t$1,%1, 0x8\n" \ + "2:\t"type##_sb("$1", "1(%2)")"\n" \ + ".set\tat\n\t" \ + "li\t%0, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%0, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT));\ +} while (0) + +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR +#define _StoreW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + "1:\t"type##_swl("%1", "3(%2)")"\n" \ + "2:\t"type##_swr("%1", "(%2)")"\n\t"\ + "li\t%0, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%0, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#define _StoreDW(addr, value, res) \ +do { \ + __asm__ __volatile__ ( \ + "1:\tsdl\t%1, 7(%2)\n" \ + "2:\tsdr\t%1, (%2)\n\t" \ + "li\t%0, 0\n" \ + "3:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "4:\tli\t%0, %3\n\t" \ + "j\t3b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 4b\n\t" \ + STR(PTR)"\t2b, 4b\n\t" \ + ".previous" \ + : "=r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT)); \ +} while (0) + +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ +/* For CPUs without swl and sdl instructions */ +#define _StoreW(addr, value, res, type) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n\t" \ + ".set\tnoat\n\t" \ + "1:"type##_sb("%1", "0(%2)")"\n\t" \ + "srl\t$1, %1, 0x8\n\t" \ + "2:"type##_sb("$1", "1(%2)")"\n\t" \ + "srl\t$1, $1, 0x8\n\t" \ + "3:"type##_sb("$1", "2(%2)")"\n\t" \ + "srl\t$1, $1, 0x8\n\t" \ + "4:"type##_sb("$1", "3(%2)")"\n\t" \ + ".set\tpop\n\t" \ + "li\t%0, 0\n" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%0, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + ".previous" \ + : "=&r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT) \ + : "memory"); \ +} while (0) + +#define _StoreDW(addr, value, res) \ +do { \ + __asm__ __volatile__ ( \ + ".set\tpush\n\t" \ + ".set\tnoat\n\t" \ + "1:sb\t%1, 0(%2)\n\t" \ + "dsrl\t$1, %1, 0x8\n\t" \ + "2:sb\t$1, 1(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "3:sb\t$1, 2(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "4:sb\t$1, 3(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "5:sb\t$1, 4(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "6:sb\t$1, 5(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "7:sb\t$1, 6(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + "8:sb\t$1, 7(%2)\n\t" \ + "dsrl\t$1, $1, 0x8\n\t" \ + ".set\tpop\n\t" \ + "li\t%0, 0\n" \ + "10:\n\t" \ + ".insn\n\t" \ + ".section\t.fixup,\"ax\"\n\t" \ + "11:\tli\t%0, %3\n\t" \ + "j\t10b\n\t" \ + ".previous\n\t" \ + ".section\t__ex_table,\"a\"\n\t" \ + STR(PTR)"\t1b, 11b\n\t" \ + STR(PTR)"\t2b, 11b\n\t" \ + STR(PTR)"\t3b, 11b\n\t" \ + STR(PTR)"\t4b, 11b\n\t" \ + STR(PTR)"\t5b, 11b\n\t" \ + STR(PTR)"\t6b, 11b\n\t" \ + STR(PTR)"\t7b, 11b\n\t" \ + STR(PTR)"\t8b, 11b\n\t" \ + ".previous" \ + : "=&r" (res) \ + : "r" (value), "r" (addr), "i" (-EFAULT) \ + : "memory"); \ +} while (0) + +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ +#endif + +#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel) +#define LoadHWUE(addr, value, res) _LoadHWU(addr, value, res, user) +#define LoadWU(addr, value, res) _LoadWU(addr, value, res, kernel) +#define LoadWUE(addr, value, res) _LoadWU(addr, value, res, user) +#define LoadHW(addr, value, res) _LoadHW(addr, value, res, kernel) +#define LoadHWE(addr, value, res) _LoadHW(addr, value, res, user) +#define LoadW(addr, value, res) _LoadW(addr, value, res, kernel) +#define LoadWE(addr, value, res) _LoadW(addr, value, res, user) +#define LoadDW(addr, value, res) _LoadDW(addr, value, res) + +#define StoreHW(addr, value, res) _StoreHW(addr, value, res, kernel) +#define StoreHWE(addr, value, res) _StoreHW(addr, value, res, user) +#define StoreW(addr, value, res) _StoreW(addr, value, res, kernel) +#define StoreWE(addr, value, res) _StoreW(addr, value, res, user) +#define StoreDW(addr, value, res) _StoreDW(addr, value, res) + +#endif /* _ASM_MIPS_UNALIGNED_EMUL_H */ diff --git a/arch/mips/include/asm/vermagic.h b/arch/mips/include/asm/vermagic.h index 24dc3d35161c..4d2dae0c7c57 100644 --- a/arch/mips/include/asm/vermagic.h +++ b/arch/mips/include/asm/vermagic.h @@ -8,12 +8,16 @@ #define MODULE_PROC_FAMILY "MIPS32_R1 " #elif defined CONFIG_CPU_MIPS32_R2 #define MODULE_PROC_FAMILY "MIPS32_R2 " +#elif defined CONFIG_CPU_MIPS32_R5 +#define MODULE_PROC_FAMILY "MIPS32_R5 " #elif defined CONFIG_CPU_MIPS32_R6 #define MODULE_PROC_FAMILY "MIPS32_R6 " #elif defined CONFIG_CPU_MIPS64_R1 #define MODULE_PROC_FAMILY "MIPS64_R1 " #elif defined CONFIG_CPU_MIPS64_R2 #define MODULE_PROC_FAMILY "MIPS64_R2 " +#elif defined CONFIG_CPU_MIPS64_R5 +#define MODULE_PROC_FAMILY "MIPS64_R5 " #elif defined CONFIG_CPU_MIPS64_R6 #define MODULE_PROC_FAMILY "MIPS64_R6 " #elif defined CONFIG_CPU_R3000 @@ -46,6 +50,8 @@ #define MODULE_PROC_FAMILY "LOONGSON64 " #elif defined CONFIG_CPU_CAVIUM_OCTEON #define MODULE_PROC_FAMILY "OCTEON " +#elif defined CONFIG_CPU_P5600 +#define MODULE_PROC_FAMILY "P5600 " #elif defined CONFIG_CPU_XLR #define MODULE_PROC_FAMILY "XLR " #elif defined CONFIG_CPU_XLP diff --git a/arch/mips/include/uapi/asm/hwcap.h b/arch/mips/include/uapi/asm/hwcap.h index 1ade1daa4921..b7e02bdc1985 100644 --- a/arch/mips/include/uapi/asm/hwcap.h +++ b/arch/mips/include/uapi/asm/hwcap.h @@ -17,5 +17,6 @@ #define HWCAP_LOONGSON_MMI (1 << 11) #define HWCAP_LOONGSON_EXT (1 << 12) #define HWCAP_LOONGSON_EXT2 (1 << 13) +#define HWCAP_LOONGSON_CPUCFG (1 << 14) #endif /* _UAPI_ASM_HWCAP_H */ diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h index eaa3a80affdf..98f97c85e059 100644 --- a/arch/mips/include/uapi/asm/inst.h +++ b/arch/mips/include/uapi/asm/inst.h @@ -989,6 +989,30 @@ struct mm16_r5_format { /* Load/store from stack pointer format */ }; /* + * Loongson-3 overridden COP2 instruction formats (32-bit length) + */ +struct loongson3_lswc2_format { /* Loongson-3 overridden lwc2/swc2 Load/Store format */ + __BITFIELD_FIELD(unsigned int opcode : 6, + __BITFIELD_FIELD(unsigned int base : 5, + __BITFIELD_FIELD(unsigned int rt : 5, + __BITFIELD_FIELD(unsigned int fr : 1, + __BITFIELD_FIELD(unsigned int offset : 9, + __BITFIELD_FIELD(unsigned int ls : 1, + __BITFIELD_FIELD(unsigned int rq : 5, + ;))))))) +}; + +struct loongson3_lsdc2_format { /* Loongson-3 overridden ldc2/sdc2 Load/Store format */ + __BITFIELD_FIELD(unsigned int opcode : 6, + __BITFIELD_FIELD(unsigned int base : 5, + __BITFIELD_FIELD(unsigned int rt : 5, + __BITFIELD_FIELD(unsigned int index : 5, + __BITFIELD_FIELD(unsigned int offset : 8, + __BITFIELD_FIELD(unsigned int opcode1 : 3, + ;)))))) +}; + +/* * MIPS16e instruction formats (16-bit length) */ struct m16e_rr { @@ -1088,6 +1112,8 @@ union mips_instruction { struct mm16_rb_format mm16_rb_format; struct mm16_r3_format mm16_r3_format; struct mm16_r5_format mm16_r5_format; + struct loongson3_lswc2_format loongson3_lswc2_format; + struct loongson3_lsdc2_format loongson3_lsdc2_format; }; union mips16e_instruction { diff --git a/arch/mips/jazz/Platform b/arch/mips/jazz/Platform index 3373788acca1..eb0490ae8b09 100644 --- a/arch/mips/jazz/Platform +++ b/arch/mips/jazz/Platform @@ -1,6 +1,5 @@ # # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # -platform-$(CONFIG_MACH_JAZZ) += jazz/ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctree)/arch/mips/include/asm/mach-jazz load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig index 412d2faa3cdf..9c2e8c15bb97 100644 --- a/arch/mips/jz4740/Kconfig +++ b/arch/mips/jz4740/Kconfig @@ -2,7 +2,14 @@ choice prompt "Machine type" depends on MACH_INGENIC - default JZ4740_QI_LB60 + default INGENIC_GENERIC_BOARD + +config INGENIC_GENERIC_BOARD + bool "Generic board" + select MACH_JZ4740 + select MACH_JZ4770 + select MACH_JZ4780 + select MACH_X1000 config JZ4740_QI_LB60 bool "Qi Hardware Ben NanoNote" diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile index 6de14c0deb4e..f96c0f5eca44 100644 --- a/arch/mips/jz4740/Makefile +++ b/arch/mips/jz4740/Makefile @@ -4,11 +4,6 @@ # # Object file lists. - -obj-y += prom.o time.o reset.o setup.o timer.o +obj-y += setup.o CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt - -# PM support - -obj-$(CONFIG_PM) += pm.o diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform index a2a5a85ea1f9..bd35d0621b13 100644 --- a/arch/mips/jz4740/Platform +++ b/arch/mips/jz4740/Platform @@ -1,4 +1,3 @@ -platform-$(CONFIG_MACH_INGENIC) += jz4740/ cflags-$(CONFIG_MACH_INGENIC) += -I$(srctree)/arch/mips/include/asm/mach-jz4740 load-$(CONFIG_MACH_INGENIC) += 0xffffffff80010000 zload-$(CONFIG_MACH_INGENIC) += 0xffffffff81000000 diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c deleted file mode 100644 index f9b551f01f42..000000000000 --- a/arch/mips/jz4740/pm.c +++ /dev/null @@ -1,34 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ4740 SoC power management support - */ - -#include <linux/init.h> -#include <linux/pm.h> -#include <linux/delay.h> -#include <linux/suspend.h> - -static int jz4740_pm_enter(suspend_state_t state) -{ - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); - - - - return 0; -} - -static const struct platform_suspend_ops jz4740_pm_ops = { - .valid = suspend_valid_only_mem, - .enter = jz4740_pm_enter, -}; - -static int __init jz4740_pm_init(void) -{ - suspend_set_ops(&jz4740_pm_ops); - return 0; - -} -late_initcall(jz4740_pm_init); diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c deleted file mode 100644 index ff4555c3fb15..000000000000 --- a/arch/mips/jz4740/prom.c +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ4740 SoC prom code - */ - -#include <linux/init.h> - -#include <asm/bootinfo.h> -#include <asm/fw/fw.h> - -void __init prom_init(void) -{ - fw_init_cmdline(); -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c deleted file mode 100644 index 1f9f02e54085..000000000000 --- a/arch/mips/jz4740/reset.c +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - */ - -#include <asm/reboot.h> - -#include "reset.h" - -static void jz4740_halt(void) -{ - while (1) { - __asm__(".set push;\n" - ".set mips3;\n" - "wait;\n" - ".set pop;\n" - ); - } -} - -void jz4740_reset_init(void) -{ - _machine_halt = jz4740_halt; -} diff --git a/arch/mips/jz4740/reset.h b/arch/mips/jz4740/reset.h deleted file mode 100644 index 4e8746ee9b61..000000000000 --- a/arch/mips/jz4740/reset.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __MIPS_JZ4740_RESET_H__ -#define __MIPS_JZ4740_RESET_H__ - -extern void jz4740_reset_init(void); - -#endif diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c index 880c26857aff..61468a87775c 100644 --- a/arch/mips/jz4740/setup.c +++ b/arch/mips/jz4740/setup.c @@ -5,17 +5,22 @@ * JZ4740 setup code */ +#include <linux/clocksource.h> #include <linux/init.h> #include <linux/io.h> #include <linux/irqchip.h> #include <linux/kernel.h> #include <linux/libfdt.h> +#include <linux/of_clk.h> #include <linux/of_fdt.h> +#include <linux/pm.h> +#include <linux/suspend.h> #include <asm/bootinfo.h> +#include <asm/fw/fw.h> #include <asm/prom.h> - -#include "reset.h" +#include <asm/reboot.h> +#include <asm/time.h> #define JZ4740_EMC_BASE_ADDR 0x13010000 @@ -61,8 +66,6 @@ void __init plat_mem_setup(void) int offset; void *dtb; - jz4740_reset_init(); - if (__dtb_start != __dtb_end) dtb = __dtb_start; else @@ -105,3 +108,56 @@ void __init arch_init_irq(void) { irqchip_init(); } + +void __init plat_time_init(void) +{ + of_clk_init(NULL); + timer_probe(); +} + +void __init prom_init(void) +{ + fw_init_cmdline(); +} + +void __init prom_free_prom_memory(void) +{ +} + +static void jz4740_wait_instr(void) +{ + __asm__(".set push;\n" + ".set mips3;\n" + "wait;\n" + ".set pop;\n" + ); +} + +static void jz4740_halt(void) +{ + for (;;) + jz4740_wait_instr(); +} + +static int __maybe_unused jz4740_pm_enter(suspend_state_t state) +{ + jz4740_wait_instr(); + + return 0; +} + +static const struct platform_suspend_ops jz4740_pm_ops __maybe_unused = { + .valid = suspend_valid_only_mem, + .enter = jz4740_pm_enter, +}; + +static int __init jz4740_pm_init(void) +{ + if (IS_ENABLED(CONFIG_PM_SLEEP)) + suspend_set_ops(&jz4740_pm_ops); + _machine_halt = jz4740_halt; + + return 0; + +} +late_initcall(jz4740_pm_init); diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c deleted file mode 100644 index 605a84a250bf..000000000000 --- a/arch/mips/jz4740/time.c +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ4740 platform time support - */ - -#include <linux/clocksource.h> -#include <linux/of_clk.h> - -#include <asm/mach-jz4740/timer.h> - -void __init plat_time_init(void) -{ - of_clk_init(NULL); - jz4740_timer_init(); - timer_probe(); -} diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c deleted file mode 100644 index 5c9f82de6a82..000000000000 --- a/arch/mips/jz4740/timer.c +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> - * JZ4740 platform timer support - */ - -#include <linux/export.h> -#include <linux/io.h> -#include <linux/init.h> -#include <linux/kernel.h> - -#include <asm/mach-jz4740/base.h> -#include <asm/mach-jz4740/timer.h> - -void __iomem *jz4740_timer_base; -EXPORT_SYMBOL_GPL(jz4740_timer_base); - -void jz4740_timer_enable_watchdog(void) -{ - writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR); -} -EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog); - -void jz4740_timer_disable_watchdog(void) -{ - writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET); -} -EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog); - -void __init jz4740_timer_init(void) -{ - jz4740_timer_base = ioremap(JZ4740_TCU_BASE_ADDR, 0x100); - - if (!jz4740_timer_base) - panic("Failed to ioremap timer registers"); - - /* Disable all timer clocks except for those used as system timers */ - writel(0x000100fc, jz4740_timer_base + JZ_REG_TIMER_STOP_SET); - - /* Timer irqs are unmasked by default, mask them */ - writel(0x00ff00ff, jz4740_timer_base + JZ_REG_TIMER_MASK_SET); -} diff --git a/arch/mips/kernel/8250-platform.c b/arch/mips/kernel/8250-platform.c deleted file mode 100644 index 5c6b2ab1f56e..000000000000 --- a/arch/mips/kernel/8250-platform.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - */ -#include <linux/init.h> -#include <linux/serial_8250.h> - -#define PORT(base, int) \ -{ \ - .iobase = base, \ - .irq = int, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -static struct plat_serial8250_port uart8250_data[] = { - PORT(0x3F8, 4), - PORT(0x2F8, 3), - PORT(0x3E8, 4), - PORT(0x2E8, 3), - { }, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = uart8250_data, - }, -}; - -static int __init uart8250_init(void) -{ - return platform_device_register(&uart8250_device); -} - -module_init(uart8250_init); - -MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic 8250 UART probe driver"); diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index d6e97df51cfb..8c7a043295ed 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -98,8 +98,6 @@ obj-$(CONFIG_MIPSR2_TO_R6_EMULATOR) += mips-r2-to-r6-emul.o CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -x c /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi) -obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o - obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 2c38f75d87ff..fb3e203698ea 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -90,7 +90,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, regs->regs[31] = regs->cp0_epc + dec_insn.pc_inc + dec_insn.next_pc_inc; - /* Fall through */ + fallthrough; case mm_bltz_op: if ((long)regs->regs[insn.mm_i_format.rs] < 0) *contpc = regs->cp0_epc + @@ -106,7 +106,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, regs->regs[31] = regs->cp0_epc + dec_insn.pc_inc + dec_insn.next_pc_inc; - /* Fall through */ + fallthrough; case mm_bgez_op: if ((long)regs->regs[insn.mm_i_format.rs] >= 0) *contpc = regs->cp0_epc + @@ -144,7 +144,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, unsigned int bit; bc_false = 1; - /* Fall through */ + fallthrough; case mm_bc2t_op: case mm_bc1t_op: preempt_disable(); @@ -178,7 +178,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, case mm_jalrs16_op: regs->regs[31] = regs->cp0_epc + dec_insn.pc_inc + dec_insn.next_pc_inc; - /* Fall through */ + fallthrough; case mm_jr16_op: *contpc = regs->regs[insn.mm_i_format.rs]; return 1; @@ -239,7 +239,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, case mm_jal32_op: regs->regs[31] = regs->cp0_epc + dec_insn.pc_inc + dec_insn.next_pc_inc; - /* Fall through */ + fallthrough; case mm_j32_op: *contpc = regs->cp0_epc + dec_insn.pc_inc; *contpc >>= 27; @@ -432,7 +432,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, switch (insn.r_format.func) { case jalr_op: regs->regs[insn.r_format.rd] = epc + 8; - /* Fall through */ + fallthrough; case jr_op: if (NO_R6EMU && insn.r_format.func == jr_op) goto sigill_r2r6; @@ -451,7 +451,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, case bltzl_op: if (NO_R6EMU) goto sigill_r2r6; - /* fall through */ + fallthrough; case bltz_op: if ((long)regs->regs[insn.i_format.rs] < 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); @@ -465,7 +465,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, case bgezl_op: if (NO_R6EMU) goto sigill_r2r6; - /* fall through */ + fallthrough; case bgez_op: if ((long)regs->regs[insn.i_format.rs] >= 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); @@ -561,7 +561,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, case jalx_op: case jal_op: regs->regs[31] = regs->cp0_epc + 8; - /* fall through */ + fallthrough; case j_op: epc += 4; epc >>= 28; @@ -578,7 +578,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, case beql_op: if (NO_R6EMU) goto sigill_r2r6; - /* fall through */ + fallthrough; case beq_op: if (regs->regs[insn.i_format.rs] == regs->regs[insn.i_format.rt]) { @@ -593,7 +593,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, case bnel_op: if (NO_R6EMU) goto sigill_r2r6; - /* fall through */ + fallthrough; case bne_op: if (regs->regs[insn.i_format.rs] != regs->regs[insn.i_format.rt]) { @@ -608,7 +608,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, case blezl_op: /* not really i_format */ if (!insn.i_format.rt && NO_R6EMU) goto sigill_r2r6; - /* fall through */ + fallthrough; case blez_op: /* * Compact branches for R6 for the @@ -644,7 +644,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, case bgtzl_op: if (!insn.i_format.rt && NO_R6EMU) goto sigill_r2r6; - /* fall through */ + fallthrough; case bgtz_op: /* * Compact branches for R6 for the diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 17a9cbb8b3df..995ad9e69ded 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -8,6 +8,7 @@ */ #include <linux/clockchips.h> #include <linux/interrupt.h> +#include <linux/cpufreq.h> #include <linux/percpu.h> #include <linux/smp.h> #include <linux/irq.h> @@ -250,6 +251,49 @@ unsigned int __weak get_c0_compare_int(void) return MIPS_CPU_IRQ_BASE + cp0_compare_irq; } +#ifdef CONFIG_CPU_FREQ + +static unsigned long mips_ref_freq; + +static int r4k_cpufreq_callback(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + struct clock_event_device *cd; + unsigned long rate; + int cpu; + + if (!mips_ref_freq) + mips_ref_freq = freq->old; + + if (val == CPUFREQ_POSTCHANGE) { + rate = cpufreq_scale(mips_hpt_frequency, mips_ref_freq, + freq->new); + + for_each_cpu(cpu, freq->policy->cpus) { + cd = &per_cpu(mips_clockevent_device, cpu); + + clockevents_update_freq(cd, rate); + } + } + + return 0; +} + +static struct notifier_block r4k_cpufreq_notifier = { + .notifier_call = r4k_cpufreq_callback, +}; + +static int __init r4k_register_cpufreq_notifier(void) +{ + return cpufreq_register_notifier(&r4k_cpufreq_notifier, + CPUFREQ_TRANSITION_NOTIFIER); + +} +core_initcall(r4k_register_cpufreq_notifier); + +#endif /* !CONFIG_CPU_FREQ */ + int r4k_clockevent_init(void) { unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED; diff --git a/arch/mips/kernel/cps-vec-ns16550.S b/arch/mips/kernel/cps-vec-ns16550.S index d5a67b4ce9f6..30725e1df987 100644 --- a/arch/mips/kernel/cps-vec-ns16550.S +++ b/arch/mips/kernel/cps-vec-ns16550.S @@ -14,16 +14,30 @@ #define UART_TX_OFS (UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT) #define UART_LSR_OFS (UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT) +#if CONFIG_MIPS_CPS_NS16550_WIDTH == 1 +# define UART_L lb +# define UART_S sb +#elif CONFIG_MIPS_CPS_NS16550_WIDTH == 2 +# define UART_L lh +# define UART_S sh +#elif CONFIG_MIPS_CPS_NS16550_WIDTH == 4 +# define UART_L lw +# define UART_S sw +#else +# define UART_L lb +# define UART_S sb +#endif + /** * _mips_cps_putc() - write a character to the UART * @a0: ASCII character to write * @t9: UART base address */ LEAF(_mips_cps_putc) -1: lw t0, UART_LSR_OFS(t9) +1: UART_L t0, UART_LSR_OFS(t9) andi t0, t0, UART_LSR_TEMT beqz t0, 1b - sb a0, UART_TX_OFS(t9) + UART_S a0, UART_TX_OFS(t9) jr ra END(_mips_cps_putc) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index f21a2304401f..6b93162d7c5a 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -28,6 +28,8 @@ #include <asm/spram.h> #include <linux/uaccess.h> +#include <asm/mach-loongson64/cpucfg-emul.h> + /* Hardware capabilities */ unsigned int elf_hwcap __read_mostly; EXPORT_SYMBOL_GPL(elf_hwcap); @@ -92,6 +94,7 @@ static void cpu_set_fpu_2008(struct cpuinfo_mips *c) { if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) { unsigned long sr, fir, fcsr, fcsr0, fcsr1; @@ -172,6 +175,7 @@ static void cpu_set_nofpu_2008(struct cpuinfo_mips *c) case STRICT: if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) { c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY; } else { @@ -263,9 +267,11 @@ static void cpu_set_nofpu_id(struct cpuinfo_mips *c) value = 0; if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) value |= MIPS_FPIR_D | MIPS_FPIR_S; if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W; if (c->options & MIPS_CPU_NAN_2008) @@ -286,6 +292,7 @@ static void cpu_set_fpu_opts(struct cpuinfo_mips *c) if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) { if (c->fpu_id & MIPS_FPIR_3D) c->ases |= MIPS_ASE_MIPS3D; @@ -532,22 +539,26 @@ static inline void cpu_probe_vmbits(struct cpuinfo_mips *c) static void set_isa(struct cpuinfo_mips *c, unsigned int isa) { switch (isa) { + case MIPS_CPU_ISA_M64R5: + c->isa_level |= MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5; + set_elf_base_platform("mips64r5"); + fallthrough; case MIPS_CPU_ISA_M64R2: c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2; set_elf_base_platform("mips64r2"); - /* fall through */ + fallthrough; case MIPS_CPU_ISA_M64R1: c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1; set_elf_base_platform("mips64"); - /* fall through */ + fallthrough; case MIPS_CPU_ISA_V: c->isa_level |= MIPS_CPU_ISA_V; set_elf_base_platform("mips5"); - /* fall through */ + fallthrough; case MIPS_CPU_ISA_IV: c->isa_level |= MIPS_CPU_ISA_IV; set_elf_base_platform("mips4"); - /* fall through */ + fallthrough; case MIPS_CPU_ISA_III: c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III; set_elf_base_platform("mips3"); @@ -557,20 +568,24 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa) case MIPS_CPU_ISA_M64R6: c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6; set_elf_base_platform("mips64r6"); - /* fall through */ + fallthrough; case MIPS_CPU_ISA_M32R6: c->isa_level |= MIPS_CPU_ISA_M32R6; set_elf_base_platform("mips32r6"); /* Break here so we don't add incompatible ISAs */ break; + case MIPS_CPU_ISA_M32R5: + c->isa_level |= MIPS_CPU_ISA_M32R5; + set_elf_base_platform("mips32r5"); + fallthrough; case MIPS_CPU_ISA_M32R2: c->isa_level |= MIPS_CPU_ISA_M32R2; set_elf_base_platform("mips32r2"); - /* fall through */ + fallthrough; case MIPS_CPU_ISA_M32R1: c->isa_level |= MIPS_CPU_ISA_M32R1; set_elf_base_platform("mips32"); - /* fall through */ + fallthrough; case MIPS_CPU_ISA_II: c->isa_level |= MIPS_CPU_ISA_II; set_elf_base_platform("mips2"); @@ -620,14 +635,14 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags) config = read_c0_config6(); if (flags & FTLB_EN) - config |= MIPS_CONF6_FTLBEN; + config |= MIPS_CONF6_MTI_FTLBEN; else - config &= ~MIPS_CONF6_FTLBEN; + config &= ~MIPS_CONF6_MTI_FTLBEN; if (flags & FTLB_SET_PROB) { - config &= ~(3 << MIPS_CONF6_FTLBP_SHIFT); + config &= ~(3 << MIPS_CONF6_MTI_FTLBP_SHIFT); config |= calculate_ftlb_probability(c) - << MIPS_CONF6_FTLBP_SHIFT; + << MIPS_CONF6_MTI_FTLBP_SHIFT; } write_c0_config6(config); @@ -647,10 +662,10 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags) config = read_c0_config6(); if (flags & FTLB_EN) /* Enable FTLB */ - write_c0_config6(config & ~MIPS_CONF6_FTLBDIS); + write_c0_config6(config & ~MIPS_CONF6_LOONGSON_FTLBDIS); else /* Disable FTLB */ - write_c0_config6(config | MIPS_CONF6_FTLBDIS); + write_c0_config6(config | MIPS_CONF6_LOONGSON_FTLBDIS); break; default: return 1; @@ -659,6 +674,52 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags) return 0; } +static int mm_config(struct cpuinfo_mips *c) +{ + unsigned int config0, update, mm; + + config0 = read_c0_config(); + mm = config0 & MIPS_CONF_MM; + + /* + * It's implementation dependent what type of write-merge is supported + * and whether it can be enabled/disabled. If it is settable lets make + * the merging allowed by default. Some platforms might have + * write-through caching unsupported. In this case just ignore the + * CP0.Config.MM bit field value. + */ + switch (c->cputype) { + case CPU_24K: + case CPU_34K: + case CPU_74K: + case CPU_P5600: + case CPU_P6600: + c->options |= MIPS_CPU_MM_FULL; + update = MIPS_CONF_MM_FULL; + break; + case CPU_1004K: + case CPU_1074K: + case CPU_INTERAPTIV: + case CPU_PROAPTIV: + mm = 0; + fallthrough; + default: + update = 0; + break; + } + + if (update) { + config0 = (config0 & ~MIPS_CONF_MM) | update; + write_c0_config(config0); + } else if (mm == MIPS_CONF_MM_SYSAD) { + c->options |= MIPS_CPU_MM_SYSAD; + } else if (mm == MIPS_CONF_MM_FULL) { + c->options |= MIPS_CPU_MM_FULL; + } + + return 0; +} + static inline unsigned int decode_config0(struct cpuinfo_mips *c) { unsigned int config0; @@ -850,7 +911,7 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c) MIPS_CONF4_VTLBSIZEEXT_SHIFT) * 0x40; c->tlbsize = c->tlbsizevtlb; ftlb_page = MIPS_CONF4_VFTLBPAGESIZE; - /* fall through */ + fallthrough; case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT: if (mips_ftlb_disabled) break; @@ -1750,13 +1811,19 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) spram_config(); + mm_config(c); + switch (__get_cpu_type(c->cputype)) { + case CPU_M5150: + case CPU_P5600: + set_isa(c, MIPS_CPU_ISA_M32R5); + break; case CPU_I6500: c->options |= MIPS_CPU_SHARED_FTLB_ENTRIES; - /* fall-through */ + fallthrough; case CPU_I6400: c->options |= MIPS_CPU_SHARED_FTLB_RAM; - /* fall-through */ + fallthrough; default: break; } @@ -1932,10 +1999,53 @@ platform: } } +#ifdef CONFIG_CPU_LOONGSON64 +#include <loongson_regs.h> + +static inline void decode_cpucfg(struct cpuinfo_mips *c) +{ + u32 cfg1 = read_cpucfg(LOONGSON_CFG1); + u32 cfg2 = read_cpucfg(LOONGSON_CFG2); + u32 cfg3 = read_cpucfg(LOONGSON_CFG3); + + if (cfg1 & LOONGSON_CFG1_MMI) + c->ases |= MIPS_ASE_LOONGSON_MMI; + + if (cfg2 & LOONGSON_CFG2_LEXT1) + c->ases |= MIPS_ASE_LOONGSON_EXT; + + if (cfg2 & LOONGSON_CFG2_LEXT2) + c->ases |= MIPS_ASE_LOONGSON_EXT2; + + if (cfg2 & LOONGSON_CFG2_LSPW) + c->options |= MIPS_CPU_LDPTE; + + if (cfg3 & LOONGSON_CFG3_LCAMP) + c->ases |= MIPS_ASE_LOONGSON_CAM; +} + static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { + decode_configs(c); + switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */ + case PRID_IMP_LOONGSON_64R: /* Loongson-64 Reduced */ + switch (c->processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2K_R1_0: + case PRID_REV_LOONGSON2K_R1_1: + case PRID_REV_LOONGSON2K_R1_2: + case PRID_REV_LOONGSON2K_R1_3: + c->cputype = CPU_LOONGSON64; + __cpu_name[cpu] = "Loongson-2K"; + set_elf_platform(cpu, "gs264e"); + set_isa(c, MIPS_CPU_ISA_M64R2); + break; + } + c->writecombine = _CACHE_UNCACHED_ACCELERATED; + c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT | + MIPS_ASE_LOONGSON_EXT2); + break; + case PRID_IMP_LOONGSON_64C: /* Loongson-3 Classic */ switch (c->processor_id & PRID_REV_MASK) { case PRID_REV_LOONGSON3A_R2_0: case PRID_REV_LOONGSON3A_R2_1: @@ -1952,8 +2062,14 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) set_isa(c, MIPS_CPU_ISA_M64R2); break; } - - decode_configs(c); + /* + * Loongson-3 Classic did not implement MIPS standard TLBINV + * but implemented TLBINVF and EHINV. As currently we're only + * using these two features, enable MIPS_CPU_TLBINV as well. + * + * Also some early Loongson-3A2000 had wrong TLB type in Config + * register, we correct it here. + */ c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE; c->writecombine = _CACHE_UNCACHED_ACCELERATED; c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | @@ -1964,17 +2080,17 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3a"); set_isa(c, MIPS_CPU_ISA_M64R2); - decode_configs(c); - c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE; + decode_cpucfg(c); c->writecombine = _CACHE_UNCACHED_ACCELERATED; - c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | - MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2); break; default: panic("Unknown Loongson Processor ID!"); break; } } +#else +static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { } +#endif static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) { @@ -2028,7 +2144,7 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) default: break; } - /* fall-through */ + fallthrough; case PRID_IMP_XBURST_REV2: c->cputype = CPU_XBURST; c->writecombine = _CACHE_UNCACHED_ACCELERATED; @@ -2286,6 +2402,13 @@ void cpu_probe(void) cpu_probe_vmbits(c); + /* Synthesize CPUCFG data if running on Loongson processors; + * no-op otherwise. + * + * This looks at previously probed features, so keep this at bottom. + */ + loongson3_cpucfg_synthesize_data(c); + #ifdef CONFIG_64BIT if (cpu == 0) __ua_limit = ~((1ull << cpu_vmbits) - 1); diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c index 437dda64fd7a..edc4afc080fa 100644 --- a/arch/mips/kernel/csrc-r4k.c +++ b/arch/mips/kernel/csrc-r4k.c @@ -6,6 +6,7 @@ * Copyright (C) 2007 by Ralf Baechle */ #include <linux/clocksource.h> +#include <linux/cpufreq.h> #include <linux/init.h> #include <linux/sched_clock.h> @@ -65,6 +66,45 @@ static bool rdhwr_count_usable(void) return false; } +#ifdef CONFIG_CPU_FREQ + +static bool __read_mostly r4k_clock_unstable; + +static void r4k_clocksource_unstable(char *reason) +{ + if (r4k_clock_unstable) + return; + + r4k_clock_unstable = true; + + pr_info("R4K timer is unstable due to %s\n", reason); + + clocksource_mark_unstable(&clocksource_mips); +} + +static int r4k_cpufreq_callback(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + r4k_clocksource_unstable("CPU frequency change"); + + return 0; +} + +static struct notifier_block r4k_cpufreq_notifier = { + .notifier_call = r4k_cpufreq_callback, +}; + +static int __init r4k_register_cpufreq_notifier(void) +{ + return cpufreq_register_notifier(&r4k_cpufreq_notifier, + CPUFREQ_TRANSITION_NOTIFIER); + +} +core_initcall(r4k_register_cpufreq_notifier); + +#endif /* !CONFIG_CPU_FREQ */ + int __init init_r4k_clocksource(void) { if (!cpu_has_counter || !mips_hpt_frequency) diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 4849a48afc0f..4b896f5023ff 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -169,8 +169,8 @@ syscall_exit_work: jal syscall_trace_leave b resume_userspace -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) || \ - defined(CONFIG_MIPS_MT) +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ + defined(CONFIG_CPU_MIPSR6) || defined(CONFIG_MIPS_MT) /* * MIPS32R2 Instruction Hazard Barrier - must be called @@ -183,4 +183,4 @@ LEAF(mips_ihb) nop END(mips_ihb) -#endif /* CONFIG_CPU_MIPSR2 or CONFIG_CPU_MIPSR6 or CONFIG_MIPS_MT */ +#endif /* CONFIG_CPU_MIPSR2 - CONFIG_CPU_MIPSR6 or CONFIG_MIPS_MT */ diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 0a43c9125267..a1b966f3578e 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -476,20 +476,20 @@ NESTED(nmi_handler, PT_SIZE, sp) .endm .macro __build_clear_fpe + CLI + TRACE_IRQS_OFF .set push /* gas fails to assemble cfc1 for some archs (octeon).*/ \ .set mips1 SET_HARDFLOAT cfc1 a1, fcr31 .set pop - CLI - TRACE_IRQS_OFF .endm .macro __build_clear_msa_fpe - _cfcmsa a1, MSA_CSR CLI TRACE_IRQS_OFF + _cfcmsa a1, MSA_CSR .endm .macro __build_clear_ade @@ -501,17 +501,17 @@ NESTED(nmi_handler, PT_SIZE, sp) .macro __BUILD_silent exception .endm - /* Gas tries to parse the PRINT argument as a string containing + /* Gas tries to parse the ASM_PRINT argument as a string containing string escapes and emits bogus warnings if it believes to recognize an unknown escape code. So make the arguments start with an n and gas will believe \n is ok ... */ .macro __BUILD_verbose nexception LONG_L a1, PT_EPC(sp) #ifdef CONFIG_32BIT - PRINT("Got \nexception at %08lx\012") + ASM_PRINT("Got \nexception at %08lx\012") #endif #ifdef CONFIG_64BIT - PRINT("Got \nexception at %016lx\012") + ASM_PRINT("Got \nexception at %016lx\012") #endif .endm diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 351d40fe0859..3b02ffe46304 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -132,6 +132,9 @@ dtb_found: #endif MTC0 zero, CP0_CONTEXT # clear context register +#ifdef CONFIG_64BIT + MTC0 zero, CP0_XCONTEXT +#endif PTR_LA $28, init_thread_union /* Set the SP after an empty pt_regs. */ PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 37f8e78e2869..5bc3b04693c7 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -180,7 +180,8 @@ void __init check_wait(void) break; case CPU_LOONGSON64: if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >= - (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)) + (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) || + (c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) cpu_wait = r4k_wait; break; @@ -201,7 +202,7 @@ void __init check_wait(void) */ if (IS_ENABLED(CONFIG_MIPS_EJTAG_FDC_TTY)) break; - /* fall through */ + fallthrough; case CPU_M14KC: case CPU_M14KEC: case CPU_24K: diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c index cdb93ed91cde..f60af512c877 100644 --- a/arch/mips/kernel/mips-cm.c +++ b/arch/mips/kernel/mips-cm.c @@ -114,14 +114,56 @@ static char *cm2_core[8] = { "Exclusive/OK", "Exclusive/Data" }; +static char *cm2_l2_type[4] = { + [0x0] = "None", + [0x1] = "Tag RAM single/double ECC error", + [0x2] = "Data RAM single/double ECC error", + [0x3] = "WS RAM uncorrectable dirty parity" +}; + +static char *cm2_l2_instr[32] = { + [0x00] = "L2_NOP", + [0x01] = "L2_ERR_CORR", + [0x02] = "L2_TAG_INV", + [0x03] = "L2_WS_CLEAN", + [0x04] = "L2_RD_MDYFY_WR", + [0x05] = "L2_WS_MRU", + [0x06] = "L2_EVICT_LN2", + [0x07] = "0x07", + [0x08] = "L2_EVICT", + [0x09] = "L2_REFL", + [0x0a] = "L2_RD", + [0x0b] = "L2_WR", + [0x0c] = "L2_EVICT_MRU", + [0x0d] = "L2_SYNC", + [0x0e] = "L2_REFL_ERR", + [0x0f] = "0x0f", + [0x10] = "L2_INDX_WB_INV", + [0x11] = "L2_INDX_LD_TAG", + [0x12] = "L2_INDX_ST_TAG", + [0x13] = "L2_INDX_ST_DATA", + [0x14] = "L2_INDX_ST_ECC", + [0x15] = "0x15", + [0x16] = "0x16", + [0x17] = "0x17", + [0x18] = "L2_FTCH_AND_LCK", + [0x19] = "L2_HIT_INV", + [0x1a] = "L2_HIT_WB_INV", + [0x1b] = "L2_HIT_WB", + [0x1c] = "0x1c", + [0x1d] = "0x1d", + [0x1e] = "0x1e", + [0x1f] = "0x1f" +}; + static char *cm2_causes[32] = { "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", "0x08", "0x09", "0x0a", "0x0b", "0x0c", "0x0d", "0x0e", "0x0f", - "0x10", "0x11", "0x12", "0x13", - "0x14", "0x15", "0x16", "INTVN_WR_ERR", - "INTVN_RD_ERR", "0x19", "0x1a", "0x1b", + "0x10", "INTVN_WR_ERR", "INTVN_RD_ERR", "0x13", + "0x14", "0x15", "0x16", "0x17", + "L2_RD_UNCORR", "L2_WR_UNCORR", "L2_CORR", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f" }; @@ -360,7 +402,7 @@ void mips_cm_error_report(void) "CCA=%lu TR=%s MCmd=%s STag=%lu " "SPort=%lu\n", cca_bits, cm2_tr[tr_bits], cm2_cmd[cmd_bits], stag_bits, sport_bits); - } else { + } else if (cause < 24) { /* glob state & sresp together */ unsigned long c3_bits = (cm_error >> 18) & 7; unsigned long c2_bits = (cm_error >> 15) & 7; @@ -377,6 +419,22 @@ void mips_cm_error_report(void) cm2_core[c1_bits], cm2_core[c0_bits], sc_bit ? "True" : "False", cm2_cmd[cmd_bits], sport_bits); + } else { + unsigned long muc_bit = (cm_error >> 23) & 1; + unsigned long ins_bits = (cm_error >> 18) & 0x1f; + unsigned long arr_bits = (cm_error >> 16) & 3; + unsigned long dw_bits = (cm_error >> 12) & 15; + unsigned long way_bits = (cm_error >> 9) & 7; + unsigned long mway_bit = (cm_error >> 8) & 1; + unsigned long syn_bits = (cm_error >> 0) & 0xFF; + + snprintf(buf, sizeof(buf), + "Type=%s%s Instr=%s DW=%lu Way=%lu " + "MWay=%s Syndrome=0x%02lx", + muc_bit ? "Multi-UC " : "", + cm2_l2_type[arr_bits], + cm2_l2_instr[ins_bits], dw_bits, way_bits, + mway_bit ? "True" : "False", syn_bits); } pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error, cm2_causes[cause], buf); diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c index b4d210bfcdae..a39ec755e4c2 100644 --- a/arch/mips/kernel/mips-r2-to-r6-emul.c +++ b/arch/mips/kernel/mips-r2-to-r6-emul.c @@ -1109,7 +1109,7 @@ repeat: err = SIGILL; break; } - /* fall through */ + fallthrough; case beql_op: case bnel_op: if (delay_slot(regs)) { diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 128fc9999c56..efce5defcc5c 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -90,6 +90,7 @@ struct mips_pmu { unsigned int num_counters; }; +static int counter_bits; static struct mips_pmu mipspmu; #define M_PERFCTL_EVENT(event) (((event) << MIPS_PERFCTRL_EVENT_S) & \ @@ -118,6 +119,7 @@ static struct mips_pmu mipspmu; #define M_PERFCTL_CONFIG_MASK 0x1f #endif +#define CNTR_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS static DEFINE_RWLOCK(pmuint_rwlock); @@ -154,6 +156,31 @@ static void pause_local_counters(void); static irqreturn_t mipsxx_pmu_handle_irq(int, void *); static int mipsxx_pmu_handle_shared_irq(void); +/* 0: Not Loongson-3 + * 1: Loongson-3A1000/3B1000/3B1500 + * 2: Loongson-3A2000/3A3000 + * 3: Loongson-3A4000+ + */ + +#define LOONGSON_PMU_TYPE0 0 +#define LOONGSON_PMU_TYPE1 1 +#define LOONGSON_PMU_TYPE2 2 +#define LOONGSON_PMU_TYPE3 3 + +static inline int get_loongson3_pmu_type(void) +{ + if (boot_cpu_type() != CPU_LOONGSON64) + return LOONGSON_PMU_TYPE0; + if ((boot_cpu_data.processor_id & PRID_COMP_MASK) == PRID_COMP_LEGACY) + return LOONGSON_PMU_TYPE1; + if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C) + return LOONGSON_PMU_TYPE2; + if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G) + return LOONGSON_PMU_TYPE3; + + return LOONGSON_PMU_TYPE0; +} + static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx) { if (vpe_id() == 1) @@ -186,17 +213,18 @@ static u64 mipsxx_pmu_read_counter(unsigned int idx) static u64 mipsxx_pmu_read_counter_64(unsigned int idx) { + u64 mask = CNTR_BIT_MASK(counter_bits); idx = mipsxx_pmu_swizzle_perf_idx(idx); switch (idx) { case 0: - return read_c0_perfcntr0_64(); + return read_c0_perfcntr0_64() & mask; case 1: - return read_c0_perfcntr1_64(); + return read_c0_perfcntr1_64() & mask; case 2: - return read_c0_perfcntr2_64(); + return read_c0_perfcntr2_64() & mask; case 3: - return read_c0_perfcntr3_64(); + return read_c0_perfcntr3_64() & mask; default: WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); return 0; @@ -225,6 +253,7 @@ static void mipsxx_pmu_write_counter(unsigned int idx, u64 val) static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val) { + val &= CNTR_BIT_MASK(counter_bits); idx = mipsxx_pmu_swizzle_perf_idx(idx); switch (idx) { @@ -286,12 +315,16 @@ static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc) { int i; + unsigned long cntr_mask; /* * We only need to care the counter mask. The range has been * checked definitely. */ - unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff; + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) + cntr_mask = (hwc->event_base >> 10) & 0xffff; + else + cntr_mask = (hwc->event_base >> 8) & 0xffff; for (i = mipspmu.num_counters - 1; i >= 0; i--) { /* @@ -320,10 +353,16 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx) WARN_ON(idx < 0 || idx >= mipspmu.num_counters); - cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) | - (evt->config_base & M_PERFCTL_CONFIG_MASK) | - /* Make sure interrupt enabled. */ - MIPS_PERFCTRL_IE; + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) + cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0x3ff) | + (evt->config_base & M_PERFCTL_CONFIG_MASK) | + /* Make sure interrupt enabled. */ + MIPS_PERFCTRL_IE; + else + cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) | + (evt->config_base & M_PERFCTL_CONFIG_MASK) | + /* Make sure interrupt enabled. */ + MIPS_PERFCTRL_IE; if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) { /* enable the counter for the calling thread */ @@ -396,6 +435,10 @@ static int mipspmu_event_set_period(struct perf_event *event, local64_set(&hwc->prev_count, mipspmu.overflow - left); + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) + mipsxx_pmu_write_control(idx, + M_PERFCTL_EVENT(hwc->event_base & 0x3ff)); + mipspmu.write_counter(idx, mipspmu.overflow - left); perf_event_update_userpage(event); @@ -667,8 +710,14 @@ static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev) (pev->event_id & 0xff); else #endif /* CONFIG_MIPS_MT_SMP */ - return ((pev->cntr_mask & 0xffff00) | - (pev->event_id & 0xff)); + { + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) + return (pev->cntr_mask & 0xfffc00) | + (pev->event_id & 0x3ff); + else + return (pev->cntr_mask & 0xffff00) | + (pev->event_id & 0xff); + } } static const struct mips_perf_event *mipspmu_map_general_event(int idx) @@ -783,26 +832,104 @@ static int n_counters(void) return counters; } +static void loongson3_reset_counters(void *arg) +{ + int counters = (int)(long)arg; + + switch (counters) { + case 4: + mipsxx_pmu_write_control(3, 0); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 127<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 191<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 255<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 319<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 383<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 575<<5); + mipspmu.write_counter(3, 0); + fallthrough; + case 3: + mipsxx_pmu_write_control(2, 0); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 127<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 191<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 255<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 319<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 383<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 575<<5); + mipspmu.write_counter(2, 0); + fallthrough; + case 2: + mipsxx_pmu_write_control(1, 0); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 127<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 191<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 255<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 319<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 383<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 575<<5); + mipspmu.write_counter(1, 0); + fallthrough; + case 1: + mipsxx_pmu_write_control(0, 0); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 127<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 191<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 255<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 319<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 383<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 575<<5); + mipspmu.write_counter(0, 0); + break; + } +} + static void reset_counters(void *arg) { int counters = (int)(long)arg; + + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) { + loongson3_reset_counters(arg); + return; + } + switch (counters) { case 4: mipsxx_pmu_write_control(3, 0); mipspmu.write_counter(3, 0); - /* fall through */ + fallthrough; case 3: mipsxx_pmu_write_control(2, 0); mipspmu.write_counter(2, 0); - /* fall through */ + fallthrough; case 2: mipsxx_pmu_write_control(1, 0); mipspmu.write_counter(1, 0); - /* fall through */ + fallthrough; case 1: mipsxx_pmu_write_control(0, 0); mipspmu.write_counter(0, 0); - /* fall through */ + break; } } @@ -834,13 +961,30 @@ static const struct mips_perf_event i6x00_event_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_BRANCH_MISSES] = { 0x16, CNTR_EVEN | CNTR_ODD }, }; -static const struct mips_perf_event loongson3_event_map[PERF_COUNT_HW_MAX] = { +static const struct mips_perf_event loongson3_event_map1[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN }, [PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, CNTR_ODD }, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x01, CNTR_EVEN }, [PERF_COUNT_HW_BRANCH_MISSES] = { 0x01, CNTR_ODD }, }; +static const struct mips_perf_event loongson3_event_map2[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x80, CNTR_ALL }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x81, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_MISSES] = { 0x18, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x94, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x9c, CNTR_ALL }, +}; + +static const struct mips_perf_event loongson3_event_map3[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_ALL }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x1c, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_MISSES] = { 0x1d, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x08, CNTR_ALL }, +}; + static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL }, [PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL }, @@ -1064,7 +1208,7 @@ static const struct mips_perf_event i6x00_cache_map }, }; -static const struct mips_perf_event loongson3_cache_map +static const struct mips_perf_event loongson3_cache_map1 [PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { @@ -1109,12 +1253,127 @@ static const struct mips_perf_event loongson3_cache_map [C(BPU)] = { /* Using the same code for *HW_BRANCH* */ [C(OP_READ)] = { - [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN }, - [C(RESULT_MISS)] = { 0x02, CNTR_ODD }, + [C(RESULT_ACCESS)] = { 0x01, CNTR_EVEN }, + [C(RESULT_MISS)] = { 0x01, CNTR_ODD }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x01, CNTR_EVEN }, + [C(RESULT_MISS)] = { 0x01, CNTR_ODD }, + }, +}, +}; + +static const struct mips_perf_event loongson3_cache_map2 + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + /* + * Like some other architectures (e.g. ARM), the performance + * counters don't differentiate between read and write + * accesses/misses, so this isn't strictly correct, but it's the + * best we can do. Writes and reads get combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x156, CNTR_ALL }, }, [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN }, - [C(RESULT_MISS)] = { 0x02, CNTR_ODD }, + [C(RESULT_ACCESS)] = { 0x155, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x153, CNTR_ALL }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x18, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x18, CNTR_ALL }, + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x1b6, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x1b7, CNTR_ALL }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { 0x1bf, CNTR_ALL }, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x92, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x92, CNTR_ALL }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x1a, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x1a, CNTR_ALL }, + }, +}, +[C(BPU)] = { + /* Using the same code for *HW_BRANCH* */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x94, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x9c, CNTR_ALL }, + }, +}, +}; + +static const struct mips_perf_event loongson3_cache_map3 + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + /* + * Like some other architectures (e.g. ARM), the performance + * counters don't differentiate between read and write + * accesses/misses, so this isn't strictly correct, but it's the + * best we can do. Writes and reads get combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x1e, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x1f, CNTR_ALL }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { 0xaa, CNTR_ALL }, + [C(RESULT_MISS)] = { 0xa9, CNTR_ALL }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x1c, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x1d, CNTR_ALL }, + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x2e, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x2f, CNTR_ALL }, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x14, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x1b, CNTR_ALL }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x1a, CNTR_ALL }, + }, +}, +[C(BPU)] = { + /* Using the same code for *HW_BRANCH* */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x02, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x08, CNTR_ALL }, }, }, }; @@ -1178,7 +1437,6 @@ static const struct mips_perf_event bmips5000_cache_map }, }; - static const struct mips_perf_event octeon_cache_map [PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] @@ -1512,6 +1770,7 @@ static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev) static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) { /* currently most cores have 7-bit event numbers */ + int pmu_type; unsigned int raw_id = config & 0xff; unsigned int base_id = raw_id & 0x7f; @@ -1624,8 +1883,33 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) raw_id > 127 ? CNTR_ODD : CNTR_EVEN; break; case CPU_LOONGSON64: - raw_event.cntr_mask = raw_id > 127 ? CNTR_ODD : CNTR_EVEN; - break; + pmu_type = get_loongson3_pmu_type(); + + switch (pmu_type) { + case LOONGSON_PMU_TYPE1: + raw_event.cntr_mask = + raw_id > 127 ? CNTR_ODD : CNTR_EVEN; + break; + case LOONGSON_PMU_TYPE2: + base_id = config & 0x3ff; + raw_event.cntr_mask = CNTR_ALL; + + if ((base_id >= 1 && base_id < 28) || + (base_id >= 64 && base_id < 90) || + (base_id >= 128 && base_id < 164) || + (base_id >= 192 && base_id < 200) || + (base_id >= 256 && base_id < 274) || + (base_id >= 320 && base_id < 358) || + (base_id >= 384 && base_id < 574)) + break; + + return ERR_PTR(-EOPNOTSUPP); + case LOONGSON_PMU_TYPE3: + base_id = raw_id; + raw_event.cntr_mask = CNTR_ALL; + break; + } + break; } raw_event.event_id = base_id; @@ -1683,8 +1967,7 @@ static const struct mips_perf_event *xlp_pmu_map_raw_event(u64 config) static int __init init_hw_perf_events(void) { - int counters, irq; - int counter_bits; + int counters, irq, pmu_type; pr_info("Performance counters: "); @@ -1771,8 +2054,25 @@ init_hw_perf_events(void) break; case CPU_LOONGSON64: mipspmu.name = "mips/loongson3"; - mipspmu.general_event_map = &loongson3_event_map; - mipspmu.cache_event_map = &loongson3_cache_map; + pmu_type = get_loongson3_pmu_type(); + + switch (pmu_type) { + case LOONGSON_PMU_TYPE1: + counters = 2; + mipspmu.general_event_map = &loongson3_event_map1; + mipspmu.cache_event_map = &loongson3_cache_map1; + break; + case LOONGSON_PMU_TYPE2: + counters = 4; + mipspmu.general_event_map = &loongson3_event_map2; + mipspmu.cache_event_map = &loongson3_cache_map2; + break; + case LOONGSON_PMU_TYPE3: + counters = 4; + mipspmu.general_event_map = &loongson3_event_map3; + mipspmu.cache_event_map = &loongson3_cache_map3; + break; + } break; case CPU_CAVIUM_OCTEON: case CPU_CAVIUM_OCTEON_PLUS: @@ -1803,19 +2103,26 @@ init_hw_perf_events(void) mipspmu.irq = irq; if (read_c0_perfctrl0() & MIPS_PERFCTRL_W) { - mipspmu.max_period = (1ULL << 63) - 1; - mipspmu.valid_count = (1ULL << 63) - 1; - mipspmu.overflow = 1ULL << 63; + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) { + counter_bits = 48; + mipspmu.max_period = (1ULL << 47) - 1; + mipspmu.valid_count = (1ULL << 47) - 1; + mipspmu.overflow = 1ULL << 47; + } else { + counter_bits = 64; + mipspmu.max_period = (1ULL << 63) - 1; + mipspmu.valid_count = (1ULL << 63) - 1; + mipspmu.overflow = 1ULL << 63; + } mipspmu.read_counter = mipsxx_pmu_read_counter_64; mipspmu.write_counter = mipsxx_pmu_write_counter_64; - counter_bits = 64; } else { + counter_bits = 32; mipspmu.max_period = (1ULL << 31) - 1; mipspmu.valid_count = (1ULL << 31) - 1; mipspmu.overflow = 1ULL << 31; mipspmu.read_counter = mipsxx_pmu_read_counter; mipspmu.write_counter = mipsxx_pmu_write_counter; - counter_bits = 32; } on_each_cpu(reset_counters, (void *)(long)counters, 1); diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index f8d36710cd58..4184d641f05e 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -98,12 +98,16 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "%s", " mips32r1"); if (cpu_has_mips32r2) seq_printf(m, "%s", " mips32r2"); + if (cpu_has_mips32r5) + seq_printf(m, "%s", " mips32r5"); if (cpu_has_mips32r6) seq_printf(m, "%s", " mips32r6"); if (cpu_has_mips64r1) seq_printf(m, "%s", " mips64r1"); if (cpu_has_mips64r2) seq_printf(m, "%s", " mips64r2"); + if (cpu_has_mips64r5) + seq_printf(m, "%s", " mips64r5"); if (cpu_has_mips64r6) seq_printf(m, "%s", " mips64r6"); seq_printf(m, "\n"); diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S index 59be5c812aa2..b91e91106475 100644 --- a/arch/mips/kernel/r4k_fpu.S +++ b/arch/mips/kernel/r4k_fpu.S @@ -41,7 +41,7 @@ LEAF(_save_fp) EXPORT_SYMBOL(_save_fp) #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ - defined(CONFIG_CPU_MIPSR6) + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) mfc0 t0, CP0_STATUS #endif fpu_save_double a0 t0 t1 # clobbers t1 @@ -53,7 +53,7 @@ EXPORT_SYMBOL(_save_fp) */ LEAF(_restore_fp) #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ - defined(CONFIG_CPU_MIPSR6) + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) mfc0 t0, CP0_STATUS #endif fpu_restore_double a0 t0 t1 # clobbers t1 @@ -103,10 +103,10 @@ LEAF(_save_fp_context) .set pop #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ - defined(CONFIG_CPU_MIPSR6) + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) .set push SET_HARDFLOAT -#ifdef CONFIG_CPU_MIPSR2 +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) .set mips32r2 .set fp=64 mfc0 t0, CP0_STATUS @@ -170,11 +170,11 @@ LEAF(_save_fp_context) LEAF(_restore_fp_context) EX lw t1, 0(a1) -#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ - defined(CONFIG_CPU_MIPSR6) +#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) .set push SET_HARDFLOAT -#ifdef CONFIG_CPU_MIPSR2 +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) .set mips32r2 .set fp=64 mfc0 t0, CP0_STATUS diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 41df8221bb8f..50c9a57e0d3a 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -41,7 +41,7 @@ NESTED(handle_sys, PT_SIZE, sp) #if 0 SAVE_ALL move a1, v0 - PRINT("Scall %ld\n") + ASM_PRINT("Scall %ld\n") RESTORE_ALL #endif diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 10bef8f78e7c..7b537fa2035d 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -575,7 +575,7 @@ static int __init bootcmdline_scan_chosen(unsigned long node, const char *uname, #endif /* CONFIG_OF_EARLY_FLATTREE */ -static void __init bootcmdline_init(char **cmdline_p) +static void __init bootcmdline_init(void) { bool dt_bootargs = false; @@ -654,13 +654,11 @@ static void __init bootcmdline_init(char **cmdline_p) */ static void __init arch_mem_init(char **cmdline_p) { - extern void plat_mem_setup(void); - /* call board setup routine */ plat_mem_setup(); memblock_set_bottom_up(true); - bootcmdline_init(cmdline_p); + bootcmdline_init(); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; @@ -702,7 +700,17 @@ static void __init arch_mem_init(char **cmdline_p) memblock_reserve(crashk_res.start, resource_size(&crashk_res)); #endif device_tree_init(); + + /* + * In order to reduce the possibility of kernel panic when failed to + * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate + * low memory as small as possible before plat_swiotlb_setup(), so + * make sparse_init() using top-down allocation. + */ + memblock_set_bottom_up(false); sparse_init(); + memblock_set_bottom_up(true); + plat_swiotlb_setup(); dma_contiguous_reserve(PFN_PHYS(max_low_pfn)); @@ -831,7 +839,7 @@ arch_initcall(debugfs_mips); /* User defined DMA coherency from command line. */ enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT; EXPORT_SYMBOL_GPL(coherentio); -int hw_coherentio = 0; /* Actual hardware supported DMA coherency setting. */ +int hw_coherentio; /* Actual hardware supported DMA coherency setting. */ static int __init setcoherentio(char *str) { diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index f6efabcb4e92..a0262729cd4c 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -52,7 +52,7 @@ struct sigframe { /* Matches struct ucontext from its uc_mcontext field onwards */ struct sigcontext sf_sc; sigset_t sf_mask; - unsigned long long sf_extcontext[0]; + unsigned long long sf_extcontext[]; }; struct rt_sigframe { @@ -824,7 +824,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) regs->regs[2] = EINTR; break; } - /* fallthrough */ + fallthrough; case ERESTARTNOINTR: regs->regs[7] = regs->regs[26]; regs->regs[2] = regs->regs[0]; diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c index 26d355462ace..d5d96214cce5 100644 --- a/arch/mips/kernel/spram.c +++ b/arch/mips/kernel/spram.c @@ -209,11 +209,11 @@ void spram_config(void) case CPU_P6600: config0 = read_c0_config(); /* FIXME: addresses are Malta specific */ - if (config0 & (1<<24)) { + if (config0 & MIPS_CONF_ISP) { probe_spram("ISPRAM", 0x1c000000, &ispram_load_tag, &ispram_store_tag); } - if (config0 & (1<<23)) + if (config0 & MIPS_CONF_DSP) probe_spram("DSPRAM", 0x1c100000, &dspram_load_tag, &dspram_store_tag); } diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 37e9413a393d..caa01457dce6 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -18,12 +18,82 @@ #include <linux/smp.h> #include <linux/spinlock.h> #include <linux/export.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> #include <asm/cpu-features.h> #include <asm/cpu-type.h> #include <asm/div64.h> #include <asm/time.h> +#ifdef CONFIG_CPU_FREQ + +static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref); +static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref_freq); +static unsigned long glb_lpj_ref; +static unsigned long glb_lpj_ref_freq; + +static int cpufreq_callback(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + struct cpumask *cpus = freq->policy->cpus; + unsigned long lpj; + int cpu; + + /* + * Skip lpj numbers adjustment if the CPU-freq transition is safe for + * the loops delay. (Is this possible?) + */ + if (freq->flags & CPUFREQ_CONST_LOOPS) + return NOTIFY_OK; + + /* Save the initial values of the lpjes for future scaling. */ + if (!glb_lpj_ref) { + glb_lpj_ref = boot_cpu_data.udelay_val; + glb_lpj_ref_freq = freq->old; + + for_each_online_cpu(cpu) { + per_cpu(pcp_lpj_ref, cpu) = + cpu_data[cpu].udelay_val; + per_cpu(pcp_lpj_ref_freq, cpu) = freq->old; + } + } + + /* + * Adjust global lpj variable and per-CPU udelay_val number in + * accordance with the new CPU frequency. + */ + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) { + loops_per_jiffy = cpufreq_scale(glb_lpj_ref, + glb_lpj_ref_freq, + freq->new); + + for_each_cpu(cpu, cpus) { + lpj = cpufreq_scale(per_cpu(pcp_lpj_ref, cpu), + per_cpu(pcp_lpj_ref_freq, cpu), + freq->new); + cpu_data[cpu].udelay_val = (unsigned int)lpj; + } + } + + return NOTIFY_OK; +} + +static struct notifier_block cpufreq_notifier = { + .notifier_call = cpufreq_callback, +}; + +static int __init register_cpufreq_notifier(void) +{ + return cpufreq_register_notifier(&cpufreq_notifier, + CPUFREQ_TRANSITION_NOTIFIER); +} +core_initcall(register_cpufreq_notifier); + +#endif /* CONFIG_CPU_FREQ */ + /* * forward reference */ diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 31968cbd6464..22f805a73921 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -71,6 +71,8 @@ #include <asm/tlbex.h> #include <asm/uasm.h> +#include <asm/mach-loongson64/cpucfg-emul.h> + extern void check_wait(void); extern asmlinkage void rollback_handle_int(void); extern asmlinkage void handle_int(void); @@ -693,6 +695,48 @@ static int simulate_sync(struct pt_regs *regs, unsigned int opcode) return -1; /* Must be something else ... */ } +/* + * Loongson-3 CSR instructions emulation + */ + +#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION + +#define LWC2 0xc8000000 +#define RS BASE +#define CSR_OPCODE2 0x00000118 +#define CSR_OPCODE2_MASK 0x000007ff +#define CSR_FUNC_MASK RT +#define CSR_FUNC_CPUCFG 0x8 + +static int simulate_loongson3_cpucfg(struct pt_regs *regs, + unsigned int opcode) +{ + int op = opcode & OPCODE; + int op2 = opcode & CSR_OPCODE2_MASK; + int csr_func = (opcode & CSR_FUNC_MASK) >> 16; + + if (op == LWC2 && op2 == CSR_OPCODE2 && csr_func == CSR_FUNC_CPUCFG) { + int rd = (opcode & RD) >> 11; + int rs = (opcode & RS) >> 21; + __u64 sel = regs->regs[rs]; + + perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0); + + /* Do not emulate on unsupported core models. */ + if (!loongson3_cpucfg_emulation_enabled(¤t_cpu_data)) + return -1; + + regs->regs[rd] = loongson3_cpucfg_read_synthesized( + ¤t_cpu_data, sel); + + return 0; + } + + /* Not ours. */ + return -1; +} +#endif /* CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION */ + asmlinkage void do_ov(struct pt_regs *regs) { enum ctx_state prev_state; @@ -1166,6 +1210,11 @@ no_r2_instr: if (status < 0) status = simulate_fp(regs, opcode, old_epc, old31); + +#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION + if (status < 0) + status = simulate_loongson3_cpucfg(regs, opcode); +#endif } else if (cpu_has_mmips) { unsigned short mmop[2] = { 0 }; @@ -1401,8 +1450,7 @@ asmlinkage void do_cpu(struct pt_regs *regs) force_sig(SIGILL); break; } - /* Fall through. */ - + fallthrough; case 1: { void __user *fault_addr; unsigned long fcr31; diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index ca6fc4762d97..0adce604fa44 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -89,12 +89,10 @@ #include <asm/fpu.h> #include <asm/fpu_emulator.h> #include <asm/inst.h> +#include <asm/unaligned-emul.h> #include <asm/mmu_context.h> #include <linux/uaccess.h> -#define STR(x) __STR(x) -#define __STR(x) #x - enum { UNALIGNED_ACTION_QUIET, UNALIGNED_ACTION_SIGNAL, @@ -108,778 +106,6 @@ static u32 unaligned_action; #endif extern void show_registers(struct pt_regs *regs); -#ifdef __BIG_ENDIAN -#define _LoadHW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ (".set\tnoat\n" \ - "1:\t"type##_lb("%0", "0(%2)")"\n" \ - "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - "3:\t.set\tat\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#ifndef CONFIG_CPU_NO_LOAD_STORE_LR -#define _LoadW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - "1:\t"type##_lwl("%0", "(%2)")"\n" \ - "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\ - "li\t%1, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ -/* For CPUs without lwl instruction */ -#define _LoadW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n" \ - ".set\tnoat\n\t" \ - "1:"type##_lb("%0", "0(%2)")"\n\t" \ - "2:"type##_lbu("$1", "1(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "3:"type##_lbu("$1", "2(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "4:"type##_lbu("$1", "3(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - ".set\tpop\n" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%1, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ - -#define _LoadHWU(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tnoat\n" \ - "1:\t"type##_lbu("%0", "0(%2)")"\n" \ - "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".set\tat\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#ifndef CONFIG_CPU_NO_LOAD_STORE_LR -#define _LoadWU(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - "1:\t"type##_lwl("%0", "(%2)")"\n" \ - "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\ - "dsll\t%0, %0, 32\n\t" \ - "dsrl\t%0, %0, 32\n\t" \ - "li\t%1, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - "\t.section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#define _LoadDW(addr, value, res) \ -do { \ - __asm__ __volatile__ ( \ - "1:\tldl\t%0, (%2)\n" \ - "2:\tldr\t%0, 7(%2)\n\t" \ - "li\t%1, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - "\t.section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ -/* For CPUs without lwl and ldl instructions */ -#define _LoadWU(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n\t" \ - ".set\tnoat\n\t" \ - "1:"type##_lbu("%0", "0(%2)")"\n\t" \ - "2:"type##_lbu("$1", "1(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "3:"type##_lbu("$1", "2(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "4:"type##_lbu("$1", "3(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - ".set\tpop\n" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%1, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#define _LoadDW(addr, value, res) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n\t" \ - ".set\tnoat\n\t" \ - "1:lb\t%0, 0(%2)\n\t" \ - "2:lbu\t $1, 1(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "3:lbu\t$1, 2(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "4:lbu\t$1, 3(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "5:lbu\t$1, 4(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "6:lbu\t$1, 5(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "7:lbu\t$1, 6(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "8:lbu\t$1, 7(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - ".set\tpop\n\t" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%1, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - STR(PTR)"\t5b, 11b\n\t" \ - STR(PTR)"\t6b, 11b\n\t" \ - STR(PTR)"\t7b, 11b\n\t" \ - STR(PTR)"\t8b, 11b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ - - -#define _StoreHW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tnoat\n" \ - "1:\t"type##_sb("%1", "1(%2)")"\n" \ - "srl\t$1, %1, 0x8\n" \ - "2:\t"type##_sb("$1", "0(%2)")"\n" \ - ".set\tat\n\t" \ - "li\t%0, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%0, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT));\ -} while(0) - -#ifndef CONFIG_CPU_NO_LOAD_STORE_LR -#define _StoreW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - "1:\t"type##_swl("%1", "(%2)")"\n" \ - "2:\t"type##_swr("%1", "3(%2)")"\n\t"\ - "li\t%0, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%0, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#define _StoreDW(addr, value, res) \ -do { \ - __asm__ __volatile__ ( \ - "1:\tsdl\t%1,(%2)\n" \ - "2:\tsdr\t%1, 7(%2)\n\t" \ - "li\t%0, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%0, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ -#define _StoreW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n\t" \ - ".set\tnoat\n\t" \ - "1:"type##_sb("%1", "3(%2)")"\n\t" \ - "srl\t$1, %1, 0x8\n\t" \ - "2:"type##_sb("$1", "2(%2)")"\n\t" \ - "srl\t$1, $1, 0x8\n\t" \ - "3:"type##_sb("$1", "1(%2)")"\n\t" \ - "srl\t$1, $1, 0x8\n\t" \ - "4:"type##_sb("$1", "0(%2)")"\n\t" \ - ".set\tpop\n\t" \ - "li\t%0, 0\n" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%0, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - ".previous" \ - : "=&r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT) \ - : "memory"); \ -} while(0) - -#define _StoreDW(addr, value, res) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n\t" \ - ".set\tnoat\n\t" \ - "1:sb\t%1, 7(%2)\n\t" \ - "dsrl\t$1, %1, 0x8\n\t" \ - "2:sb\t$1, 6(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "3:sb\t$1, 5(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "4:sb\t$1, 4(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "5:sb\t$1, 3(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "6:sb\t$1, 2(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "7:sb\t$1, 1(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "8:sb\t$1, 0(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - ".set\tpop\n\t" \ - "li\t%0, 0\n" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%0, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - STR(PTR)"\t5b, 11b\n\t" \ - STR(PTR)"\t6b, 11b\n\t" \ - STR(PTR)"\t7b, 11b\n\t" \ - STR(PTR)"\t8b, 11b\n\t" \ - ".previous" \ - : "=&r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT) \ - : "memory"); \ -} while(0) - -#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ - -#else /* __BIG_ENDIAN */ - -#define _LoadHW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ (".set\tnoat\n" \ - "1:\t"type##_lb("%0", "1(%2)")"\n" \ - "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - "3:\t.set\tat\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#ifndef CONFIG_CPU_NO_LOAD_STORE_LR -#define _LoadW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - "1:\t"type##_lwl("%0", "3(%2)")"\n" \ - "2:\t"type##_lwr("%0", "(%2)")"\n\t"\ - "li\t%1, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ -/* For CPUs without lwl instruction */ -#define _LoadW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n" \ - ".set\tnoat\n\t" \ - "1:"type##_lb("%0", "3(%2)")"\n\t" \ - "2:"type##_lbu("$1", "2(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "3:"type##_lbu("$1", "1(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "4:"type##_lbu("$1", "0(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - ".set\tpop\n" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%1, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ - - -#define _LoadHWU(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tnoat\n" \ - "1:\t"type##_lbu("%0", "1(%2)")"\n" \ - "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".set\tat\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#ifndef CONFIG_CPU_NO_LOAD_STORE_LR -#define _LoadWU(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - "1:\t"type##_lwl("%0", "3(%2)")"\n" \ - "2:\t"type##_lwr("%0", "(%2)")"\n\t"\ - "dsll\t%0, %0, 32\n\t" \ - "dsrl\t%0, %0, 32\n\t" \ - "li\t%1, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - "\t.section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#define _LoadDW(addr, value, res) \ -do { \ - __asm__ __volatile__ ( \ - "1:\tldl\t%0, 7(%2)\n" \ - "2:\tldr\t%0, (%2)\n\t" \ - "li\t%1, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - "\t.section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%1, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ -/* For CPUs without lwl and ldl instructions */ -#define _LoadWU(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n\t" \ - ".set\tnoat\n\t" \ - "1:"type##_lbu("%0", "3(%2)")"\n\t" \ - "2:"type##_lbu("$1", "2(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "3:"type##_lbu("$1", "1(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "4:"type##_lbu("$1", "0(%2)")"\n\t" \ - "sll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - ".set\tpop\n" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%1, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#define _LoadDW(addr, value, res) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n\t" \ - ".set\tnoat\n\t" \ - "1:lb\t%0, 7(%2)\n\t" \ - "2:lbu\t$1, 6(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "3:lbu\t$1, 5(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "4:lbu\t$1, 4(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "5:lbu\t$1, 3(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "6:lbu\t$1, 2(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "7:lbu\t$1, 1(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "8:lbu\t$1, 0(%2)\n\t" \ - "dsll\t%0, 0x8\n\t" \ - "or\t%0, $1\n\t" \ - "li\t%1, 0\n" \ - ".set\tpop\n\t" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%1, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - STR(PTR)"\t5b, 11b\n\t" \ - STR(PTR)"\t6b, 11b\n\t" \ - STR(PTR)"\t7b, 11b\n\t" \ - STR(PTR)"\t8b, 11b\n\t" \ - ".previous" \ - : "=&r" (value), "=r" (res) \ - : "r" (addr), "i" (-EFAULT)); \ -} while(0) -#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ - -#define _StoreHW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tnoat\n" \ - "1:\t"type##_sb("%1", "0(%2)")"\n" \ - "srl\t$1,%1, 0x8\n" \ - "2:\t"type##_sb("$1", "1(%2)")"\n" \ - ".set\tat\n\t" \ - "li\t%0, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%0, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT));\ -} while(0) - -#ifndef CONFIG_CPU_NO_LOAD_STORE_LR -#define _StoreW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - "1:\t"type##_swl("%1", "3(%2)")"\n" \ - "2:\t"type##_swr("%1", "(%2)")"\n\t"\ - "li\t%0, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%0, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#define _StoreDW(addr, value, res) \ -do { \ - __asm__ __volatile__ ( \ - "1:\tsdl\t%1, 7(%2)\n" \ - "2:\tsdr\t%1, (%2)\n\t" \ - "li\t%0, 0\n" \ - "3:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "4:\tli\t%0, %3\n\t" \ - "j\t3b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 4b\n\t" \ - STR(PTR)"\t2b, 4b\n\t" \ - ".previous" \ - : "=r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT)); \ -} while(0) - -#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ -/* For CPUs without swl and sdl instructions */ -#define _StoreW(addr, value, res, type) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n\t" \ - ".set\tnoat\n\t" \ - "1:"type##_sb("%1", "0(%2)")"\n\t" \ - "srl\t$1, %1, 0x8\n\t" \ - "2:"type##_sb("$1", "1(%2)")"\n\t" \ - "srl\t$1, $1, 0x8\n\t" \ - "3:"type##_sb("$1", "2(%2)")"\n\t" \ - "srl\t$1, $1, 0x8\n\t" \ - "4:"type##_sb("$1", "3(%2)")"\n\t" \ - ".set\tpop\n\t" \ - "li\t%0, 0\n" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%0, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - ".previous" \ - : "=&r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT) \ - : "memory"); \ -} while(0) - -#define _StoreDW(addr, value, res) \ -do { \ - __asm__ __volatile__ ( \ - ".set\tpush\n\t" \ - ".set\tnoat\n\t" \ - "1:sb\t%1, 0(%2)\n\t" \ - "dsrl\t$1, %1, 0x8\n\t" \ - "2:sb\t$1, 1(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "3:sb\t$1, 2(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "4:sb\t$1, 3(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "5:sb\t$1, 4(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "6:sb\t$1, 5(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "7:sb\t$1, 6(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - "8:sb\t$1, 7(%2)\n\t" \ - "dsrl\t$1, $1, 0x8\n\t" \ - ".set\tpop\n\t" \ - "li\t%0, 0\n" \ - "10:\n\t" \ - ".insn\n\t" \ - ".section\t.fixup,\"ax\"\n\t" \ - "11:\tli\t%0, %3\n\t" \ - "j\t10b\n\t" \ - ".previous\n\t" \ - ".section\t__ex_table,\"a\"\n\t" \ - STR(PTR)"\t1b, 11b\n\t" \ - STR(PTR)"\t2b, 11b\n\t" \ - STR(PTR)"\t3b, 11b\n\t" \ - STR(PTR)"\t4b, 11b\n\t" \ - STR(PTR)"\t5b, 11b\n\t" \ - STR(PTR)"\t6b, 11b\n\t" \ - STR(PTR)"\t7b, 11b\n\t" \ - STR(PTR)"\t8b, 11b\n\t" \ - ".previous" \ - : "=&r" (res) \ - : "r" (value), "r" (addr), "i" (-EFAULT) \ - : "memory"); \ -} while(0) - -#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ -#endif - -#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel) -#define LoadHWUE(addr, value, res) _LoadHWU(addr, value, res, user) -#define LoadWU(addr, value, res) _LoadWU(addr, value, res, kernel) -#define LoadWUE(addr, value, res) _LoadWU(addr, value, res, user) -#define LoadHW(addr, value, res) _LoadHW(addr, value, res, kernel) -#define LoadHWE(addr, value, res) _LoadHW(addr, value, res, user) -#define LoadW(addr, value, res) _LoadW(addr, value, res, kernel) -#define LoadWE(addr, value, res) _LoadW(addr, value, res, user) -#define LoadDW(addr, value, res) _LoadDW(addr, value, res) - -#define StoreHW(addr, value, res) _StoreHW(addr, value, res, kernel) -#define StoreHWE(addr, value, res) _StoreHW(addr, value, res, user) -#define StoreW(addr, value, res) _StoreW(addr, value, res, kernel) -#define StoreWE(addr, value, res) _StoreW(addr, value, res, user) -#define StoreDW(addr, value, res) _StoreDW(addr, value, res) - static void emulate_load_store_insn(struct pt_regs *regs, void __user *addr, unsigned int __user *pc) { diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index a5f00ec73ea6..f185a85a27c1 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -55,7 +55,7 @@ SECTIONS /* . = 0xa800000000300000; */ . = 0xffffffff80300000; #endif - . = VMLINUX_LOAD_ADDRESS; + . = LINKER_LOAD_ADDRESS; /* read-only */ _text = .; /* Text and read-only data */ .text : { diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c index ba73b4077668..c9263b95cb2e 100644 --- a/arch/mips/kernel/watch.c +++ b/arch/mips/kernel/watch.c @@ -27,15 +27,15 @@ void mips_install_watch_registers(struct task_struct *t) case 4: write_c0_watchlo3(watches->watchlo[3]); write_c0_watchhi3(watchhi | watches->watchhi[3]); - /* fall through */ + fallthrough; case 3: write_c0_watchlo2(watches->watchlo[2]); write_c0_watchhi2(watchhi | watches->watchhi[2]); - /* fall through */ + fallthrough; case 2: write_c0_watchlo1(watches->watchlo[1]); write_c0_watchhi1(watchhi | watches->watchhi[1]); - /* fall through */ + fallthrough; case 1: write_c0_watchlo0(watches->watchlo[0]); write_c0_watchhi0(watchhi | watches->watchhi[0]); @@ -58,13 +58,13 @@ void mips_read_watch_registers(void) BUG(); case 4: watches->watchhi[3] = (read_c0_watchhi3() & watchhi_mask); - /* fall through */ + fallthrough; case 3: watches->watchhi[2] = (read_c0_watchhi2() & watchhi_mask); - /* fall through */ + fallthrough; case 2: watches->watchhi[1] = (read_c0_watchhi1() & watchhi_mask); - /* fall through */ + fallthrough; case 1: watches->watchhi[0] = (read_c0_watchhi0() & watchhi_mask); } @@ -91,25 +91,25 @@ void mips_clear_watch_registers(void) BUG(); case 8: write_c0_watchlo7(0); - /* fall through */ + fallthrough; case 7: write_c0_watchlo6(0); - /* fall through */ + fallthrough; case 6: write_c0_watchlo5(0); - /* fall through */ + fallthrough; case 5: write_c0_watchlo4(0); - /* fall through */ + fallthrough; case 4: write_c0_watchlo3(0); - /* fall through */ + fallthrough; case 3: write_c0_watchlo2(0); - /* fall through */ + fallthrough; case 2: write_c0_watchlo1(0); - /* fall through */ + fallthrough; case 1: write_c0_watchlo0(0); } diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c index 754094b40a75..7ccf9b096783 100644 --- a/arch/mips/kvm/emulate.c +++ b/arch/mips/kvm/emulate.c @@ -64,7 +64,7 @@ static int kvm_compute_return_epc(struct kvm_vcpu *vcpu, unsigned long instpc, switch (insn.r_format.func) { case jalr_op: arch->gprs[insn.r_format.rd] = epc + 8; - /* Fall through */ + fallthrough; case jr_op: nextpc = arch->gprs[insn.r_format.rs]; break; @@ -140,7 +140,7 @@ static int kvm_compute_return_epc(struct kvm_vcpu *vcpu, unsigned long instpc, /* These are unconditional and in j_format. */ case jal_op: arch->gprs[31] = instpc + 8; - /* fall through */ + fallthrough; case j_op: epc += 4; epc >>= 28; @@ -1724,14 +1724,14 @@ enum emulation_result kvm_mips_emulate_load(union mips_instruction inst, case lhu_op: vcpu->mmio_needed = 1; /* unsigned */ - /* fall through */ + fallthrough; case lh_op: run->mmio.len = 2; break; case lbu_op: vcpu->mmio_needed = 1; /* unsigned */ - /* fall through */ + fallthrough; case lb_op: run->mmio.len = 1; break; @@ -1790,7 +1790,7 @@ static enum emulation_result kvm_mips_guest_cache_op(int (*fn)(unsigned long), return EMULATE_EXCEPT; default: break; - }; + } } } @@ -1965,7 +1965,7 @@ enum emulation_result kvm_mips_emulate_inst(u32 cause, u32 *opc, break; default: goto unknown; - }; + } break; unknown: #endif diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 8f05dd0a0f4e..2261c63174c5 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -80,13 +80,13 @@ bool kvm_trace_guest_mode_change; int kvm_guest_mode_change_trace_reg(void) { - kvm_trace_guest_mode_change = 1; + kvm_trace_guest_mode_change = true; return 0; } void kvm_guest_mode_change_trace_unreg(void) { - kvm_trace_guest_mode_change = 0; + kvm_trace_guest_mode_change = false; } /* diff --git a/arch/mips/kvm/tlb.c b/arch/mips/kvm/tlb.c index 7cd92166a0b9..5d436c5216cc 100644 --- a/arch/mips/kvm/tlb.c +++ b/arch/mips/kvm/tlb.c @@ -469,7 +469,7 @@ void kvm_vz_local_flush_guesttlb_all(void) cvmmemctl2 |= CVMMEMCTL2_INHIBITTS; write_c0_cvmmemctl2(cvmmemctl2); break; - }; + } /* Invalidate guest entries in guest TLB */ write_gc0_entrylo0(0); @@ -486,7 +486,7 @@ void kvm_vz_local_flush_guesttlb_all(void) if (cvmmemctl2) { cvmmemctl2 &= ~CVMMEMCTL2_INHIBITTS; write_c0_cvmmemctl2(cvmmemctl2); - }; + } write_gc0_index(old_index); write_gc0_entryhi(old_entryhi); diff --git a/arch/mips/kvm/vz.c b/arch/mips/kvm/vz.c index dde20887a70d..51f51009a53f 100644 --- a/arch/mips/kvm/vz.c +++ b/arch/mips/kvm/vz.c @@ -1118,7 +1118,7 @@ static enum emulation_result kvm_vz_gpsi_cache(union mips_instruction inst, break; default: break; - }; + } kvm_err("@ %#lx/%#lx CACHE (cache: %#x, op: %#x, base[%d]: %#lx, offset: %#x\n", curr_pc, vcpu->arch.gprs[31], cache, op, base, arch->gprs[base], @@ -1183,7 +1183,7 @@ static enum emulation_result kvm_trap_vz_handle_gpsi(u32 cause, u32 *opc, trace_kvm_hwr(vcpu, KVM_TRACE_RDHWR, KVM_TRACE_HWR(rd, sel), 0); goto unknown; - }; + } trace_kvm_hwr(vcpu, KVM_TRACE_RDHWR, KVM_TRACE_HWR(rd, sel), arch->gprs[rt]); @@ -1192,7 +1192,7 @@ static enum emulation_result kvm_trap_vz_handle_gpsi(u32 cause, u32 *opc, break; default: goto unknown; - }; + } break; unknown: @@ -1946,7 +1946,7 @@ static int kvm_vz_get_one_reg(struct kvm_vcpu *vcpu, default: *v = (long)kvm_read_c0_guest_prid(cop0); break; - }; + } break; case KVM_REG_MIPS_CP0_EBASE: *v = kvm_vz_read_gc0_ebase(); @@ -2185,7 +2185,7 @@ static int kvm_vz_set_one_reg(struct kvm_vcpu *vcpu, default: kvm_write_c0_guest_prid(cop0, v); break; - }; + } break; case KVM_REG_MIPS_CP0_EBASE: kvm_vz_write_gc0_ebase(v); @@ -2980,7 +2980,7 @@ static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu) */ /* PageGrain */ - if (cpu_has_mips_r6) + if (cpu_has_mips_r5 || cpu_has_mips_r6) kvm_write_sw_gc0_pagegrain(cop0, PG_RIE | PG_XIE | PG_IEC); /* Wired */ if (cpu_has_mips_r6) @@ -2988,7 +2988,7 @@ static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu) read_gc0_wired() & MIPSR6_WIRED_LIMIT); /* Status */ kvm_write_sw_gc0_status(cop0, ST0_BEV | ST0_ERL); - if (cpu_has_mips_r6) + if (cpu_has_mips_r5 || cpu_has_mips_r6) kvm_change_sw_gc0_status(cop0, ST0_FR, read_gc0_status()); /* IntCtl */ kvm_write_sw_gc0_intctl(cop0, read_gc0_intctl() & @@ -3086,7 +3086,7 @@ static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu) } /* reset HTW registers */ - if (cpu_guest_has_htw && cpu_has_mips_r6) { + if (cpu_guest_has_htw && (cpu_has_mips_r5 || cpu_has_mips_r6)) { /* PWField */ kvm_write_sw_gc0_pwfield(cop0, 0x0c30c302); /* PWSize */ diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform index b3ec49838fd7..0bc9c0fbd431 100644 --- a/arch/mips/lantiq/Platform +++ b/arch/mips/lantiq/Platform @@ -2,7 +2,6 @@ # Lantiq # -platform-$(CONFIG_LANTIQ) += lantiq/ cflags-$(CONFIG_LANTIQ) += -I$(srctree)/arch/mips/include/asm/mach-lantiq load-$(CONFIG_LANTIQ) = 0xffffffff80002000 cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig deleted file mode 100644 index 11b89e94b835..000000000000 --- a/arch/mips/lasat/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config PICVUE - tristate "PICVUE LCD display driver" - depends on LASAT - -config PICVUE_PROC - tristate "PICVUE LCD display driver /proc interface" - depends on PICVUE && PROC_FS - -config DS1603 - bool "DS1603 RTC driver" - depends on LASAT - -config LASAT_SYSCTL - bool "LASAT sysctl interface" - depends on LASAT diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile deleted file mode 100644 index 1789b227ef20..000000000000 --- a/arch/mips/lasat/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the LASAT specific kernel interface routines under Linux. -# - -obj-y += reset.o setup.o prom.o lasat_board.o \ - at93c.o interrupt.o serial.o - -obj-$(CONFIG_LASAT_SYSCTL) += sysctl.o -obj-$(CONFIG_DS1603) += ds1603.o -obj-$(CONFIG_PICVUE) += picvue.o -obj-$(CONFIG_PICVUE_PROC) += picvue_proc.o - -clean: - make -C image clean diff --git a/arch/mips/lasat/Platform b/arch/mips/lasat/Platform deleted file mode 100644 index 760252828bf1..000000000000 --- a/arch/mips/lasat/Platform +++ /dev/null @@ -1,7 +0,0 @@ -# -# LASAT platforms -# -platform-$(CONFIG_LASAT) += lasat/ -cflags-$(CONFIG_LASAT) += \ - -I$(srctree)/arch/mips/include/asm/mach-lasat -load-$(CONFIG_LASAT) += 0xffffffff80000000 diff --git a/arch/mips/lasat/at93c.c b/arch/mips/lasat/at93c.c deleted file mode 100644 index f895fe94b937..000000000000 --- a/arch/mips/lasat/at93c.c +++ /dev/null @@ -1,148 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Atmel AT93C46 serial eeprom driver - * - * Brian Murphy <brian.murphy@eicon.com> - * - */ -#include <linux/kernel.h> -#include <linux/delay.h> -#include <asm/lasat/lasat.h> - -#include "at93c.h" - -#define AT93C_ADDR_SHIFT 7 -#define AT93C_ADDR_MAX ((1 << AT93C_ADDR_SHIFT) - 1) -#define AT93C_RCMD (0x6 << AT93C_ADDR_SHIFT) -#define AT93C_WCMD (0x5 << AT93C_ADDR_SHIFT) -#define AT93C_WENCMD 0x260 -#define AT93C_WDSCMD 0x200 - -struct at93c_defs *at93c; - -static void at93c_reg_write(u32 val) -{ - *at93c->reg = val; -} - -static u32 at93c_reg_read(void) -{ - u32 tmp = *at93c->reg; - return tmp; -} - -static u32 at93c_datareg_read(void) -{ - u32 tmp = *at93c->rdata_reg; - return tmp; -} - -static void at93c_cycle_clk(u32 data) -{ - at93c_reg_write(data | at93c->clk); - lasat_ndelay(250); - at93c_reg_write(data & ~at93c->clk); - lasat_ndelay(250); -} - -static void at93c_write_databit(u8 bit) -{ - u32 data = at93c_reg_read(); - if (bit) - data |= 1 << at93c->wdata_shift; - else - data &= ~(1 << at93c->wdata_shift); - - at93c_reg_write(data); - lasat_ndelay(100); - at93c_cycle_clk(data); -} - -static unsigned int at93c_read_databit(void) -{ - u32 data; - - at93c_cycle_clk(at93c_reg_read()); - data = (at93c_datareg_read() >> at93c->rdata_shift) & 1; - return data; -} - -static u8 at93c_read_byte(void) -{ - int i; - u8 data = 0; - - for (i = 0; i <= 7; i++) { - data <<= 1; - data |= at93c_read_databit(); - } - return data; -} - -static void at93c_write_bits(u32 data, int size) -{ - int i; - int shift = size - 1; - u32 mask = (1 << shift); - - for (i = 0; i < size; i++) { - at93c_write_databit((data & mask) >> shift); - data <<= 1; - } -} - -static void at93c_init_op(void) -{ - at93c_reg_write((at93c_reg_read() | at93c->cs) & - ~at93c->clk & ~(1 << at93c->rdata_shift)); - lasat_ndelay(50); -} - -static void at93c_end_op(void) -{ - at93c_reg_write(at93c_reg_read() & ~at93c->cs); - lasat_ndelay(250); -} - -static void at93c_wait(void) -{ - at93c_init_op(); - while (!at93c_read_databit()) - ; - at93c_end_op(); -}; - -static void at93c_disable_wp(void) -{ - at93c_init_op(); - at93c_write_bits(AT93C_WENCMD, 10); - at93c_end_op(); -} - -static void at93c_enable_wp(void) -{ - at93c_init_op(); - at93c_write_bits(AT93C_WDSCMD, 10); - at93c_end_op(); -} - -u8 at93c_read(u8 addr) -{ - u8 byte; - at93c_init_op(); - at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_RCMD, 10); - byte = at93c_read_byte(); - at93c_end_op(); - return byte; -} - -void at93c_write(u8 addr, u8 data) -{ - at93c_disable_wp(); - at93c_init_op(); - at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_WCMD, 10); - at93c_write_bits(data, 8); - at93c_end_op(); - at93c_wait(); - at93c_enable_wp(); -} diff --git a/arch/mips/lasat/at93c.h b/arch/mips/lasat/at93c.h deleted file mode 100644 index 7a99a02d81d0..000000000000 --- a/arch/mips/lasat/at93c.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Atmel AT93C46 serial eeprom driver - * - * Brian Murphy <brian.murphy@eicon.com> - * - */ - -extern struct at93c_defs { - volatile u32 *reg; - volatile u32 *rdata_reg; - int rdata_shift; - int wdata_shift; - u32 cs; - u32 clk; -} *at93c; - -u8 at93c_read(u8 addr); -void at93c_write(u8 addr, u8 data); diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c deleted file mode 100644 index e6ce39fefa78..000000000000 --- a/arch/mips/lasat/ds1603.c +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Dallas Semiconductors 1603 RTC driver - * - * Brian Murphy <brian@murphy.dk> - * - */ -#include <linux/kernel.h> -#include <asm/lasat/lasat.h> -#include <linux/delay.h> -#include <asm/lasat/ds1603.h> -#include <asm/time.h> - -#include "ds1603.h" - -#define READ_TIME_CMD 0x81 -#define SET_TIME_CMD 0x80 -#define TRIMMER_SET_CMD 0xC0 -#define TRIMMER_VALUE_MASK 0x38 -#define TRIMMER_SHIFT 3 - -struct ds_defs *ds1603; - -/* HW specific register functions */ -static void rtc_reg_write(unsigned long val) -{ - *ds1603->reg = val; -} - -static unsigned long rtc_reg_read(void) -{ - unsigned long tmp = *ds1603->reg; - return tmp; -} - -static unsigned long rtc_datareg_read(void) -{ - unsigned long tmp = *ds1603->data_reg; - return tmp; -} - -static void rtc_nrst_high(void) -{ - rtc_reg_write(rtc_reg_read() | ds1603->rst); -} - -static void rtc_nrst_low(void) -{ - rtc_reg_write(rtc_reg_read() & ~ds1603->rst); -} - -static void rtc_cycle_clock(unsigned long data) -{ - data |= ds1603->clk; - rtc_reg_write(data); - lasat_ndelay(250); - if (ds1603->data_reversed) - data &= ~ds1603->data; - else - data |= ds1603->data; - data &= ~ds1603->clk; - rtc_reg_write(data); - lasat_ndelay(250 + ds1603->huge_delay); -} - -static void rtc_write_databit(unsigned int bit) -{ - unsigned long data = rtc_reg_read(); - if (ds1603->data_reversed) - bit = !bit; - if (bit) - data |= ds1603->data; - else - data &= ~ds1603->data; - - rtc_reg_write(data); - lasat_ndelay(50 + ds1603->huge_delay); - rtc_cycle_clock(data); -} - -static unsigned int rtc_read_databit(void) -{ - unsigned int data; - - data = (rtc_datareg_read() & (1 << ds1603->data_read_shift)) - >> ds1603->data_read_shift; - rtc_cycle_clock(rtc_reg_read()); - return data; -} - -static void rtc_write_byte(unsigned int byte) -{ - int i; - - for (i = 0; i <= 7; i++) { - rtc_write_databit(byte & 1L); - byte >>= 1; - } -} - -static void rtc_write_word(unsigned long word) -{ - int i; - - for (i = 0; i <= 31; i++) { - rtc_write_databit(word & 1L); - word >>= 1; - } -} - -static unsigned long rtc_read_word(void) -{ - int i; - unsigned long word = 0; - unsigned long shift = 0; - - for (i = 0; i <= 31; i++) { - word |= rtc_read_databit() << shift; - shift++; - } - return word; -} - -static void rtc_init_op(void) -{ - rtc_nrst_high(); - - rtc_reg_write(rtc_reg_read() & ~ds1603->clk); - - lasat_ndelay(50); -} - -static void rtc_end_op(void) -{ - rtc_nrst_low(); - lasat_ndelay(1000); -} - -void read_persistent_clock64(struct timespec64 *ts) -{ - unsigned long word; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - rtc_init_op(); - rtc_write_byte(READ_TIME_CMD); - word = rtc_read_word(); - rtc_end_op(); - spin_unlock_irqrestore(&rtc_lock, flags); - - ts->tv_sec = word; - ts->tv_nsec = 0; -} - -int update_persistent_clock64(struct timespec64 now) -{ - time64_t time = now.tv_sec; - unsigned long flags; - - spin_lock_irqsave(&rtc_lock, flags); - rtc_init_op(); - rtc_write_byte(SET_TIME_CMD); - /* - * Due to the hardware limitation, we cast to 'unsigned long' type, - * so it will overflow in year 2106 on 32-bit machine. - */ - rtc_write_word((unsigned long)time); - rtc_end_op(); - spin_unlock_irqrestore(&rtc_lock, flags); - - return 0; -} - -void ds1603_set_trimmer(unsigned int trimval) -{ - rtc_init_op(); - rtc_write_byte(((trimval << TRIMMER_SHIFT) & TRIMMER_VALUE_MASK) - | (TRIMMER_SET_CMD)); - rtc_end_op(); -} - -void ds1603_disable(void) -{ - ds1603_set_trimmer(TRIMMER_DISABLE_RTC); -} - -void ds1603_enable(void) -{ - ds1603_set_trimmer(TRIMMER_DEFAULT); -} diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h deleted file mode 100644 index 00987d3bdc21..000000000000 --- a/arch/mips/lasat/ds1603.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Dallas Semiconductors 1603 RTC driver - * - * Brian Murphy <brian@murphy.dk> - * - */ -#ifndef __DS1603_H -#define __DS1603_H - -struct ds_defs { - volatile u32 *reg; - volatile u32 *data_reg; - u32 rst; - u32 clk; - u32 data; - u32 data_read_shift; - char data_reversed; - u32 huge_delay; -}; - -extern struct ds_defs *ds1603; - -void ds1603_set_trimmer(unsigned int); -void ds1603_enable(void); -void ds1603_disable(void); -void ds1603_init(struct ds_defs *); - -#define TRIMMER_DEFAULT 3 -#define TRIMMER_DISABLE_RTC 0 - -#endif diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile deleted file mode 100644 index 78ce4cff1012..000000000000 --- a/arch/mips/lasat/image/Makefile +++ /dev/null @@ -1,53 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# MAKEFILE FOR THE MIPS LINUX BOOTLOADER AND ROM DEBUGGER -# -# i-data Networks -# -# Author: Thomas Horsten <thh@i-data.com> -# - -ifndef Version - Version = "$(USER)-test" -endif - -MKLASATIMG = mklasatimg -MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200 -KERNEL_IMAGE = vmlinux - -LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal - -HEAD_DEFINES := -D_kernel_start=$(VMLINUX_LOAD_ADDRESS) \ - -D_kernel_entry=$(VMLINUX_ENTRY_ADDRESS) \ - -D VERSION="\"$(Version)\"" \ - -D TIMESTAMP=$(shell date +%s) - -$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE) - $(CC) -fno-pic $(HEAD_DEFINES) $(LINUXINCLUDE) -c -o $@ $< - -OBJECTS = head.o kImage.o - -rom.sw: $(obj)/rom.sw -rom.bin: $(obj)/rom.bin - -$(obj)/rom.sw: $(obj)/rom.bin - $(MKLASATIMG) -o $@ -k $^ -m $(MKLASATIMG_ARCH) - -$(obj)/rom.bin: $(obj)/rom - $(OBJCOPY) -O binary -S $^ $@ - -# Rule to make the bootloader -$(obj)/rom: $(addprefix $(obj)/,$(OBJECTS)) - $(LD) $(KBUILD_LDFLAGS) $(LDSCRIPT) -o $@ $^ - -$(obj)/%.o: $(obj)/%.gz - $(LD) -r -o $@ -b binary $< - -$(obj)/%.gz: $(obj)/%.bin - gzip -cf -9 $< > $@ - -$(obj)/kImage.bin: $(KERNEL_IMAGE) - $(OBJCOPY) -O binary -S $^ $@ - -clean: - rm -f rom rom.bin rom.sw kImage.bin kImage.o diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S deleted file mode 100644 index 1a27312d4c2e..000000000000 --- a/arch/mips/lasat/image/head.S +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <asm/lasat/head.h> - - .text - .section .text..start, "ax" - .set noreorder - .set mips3 - - /* Magic words identifying a software image */ - .word LASAT_K_MAGIC0_VAL - .word LASAT_K_MAGIC1_VAL - - /* Image header version */ - .word 0x00000002 - - /* image start and size */ - .word _image_start - .word _image_size - - /* start of kernel and entrypoint in uncompressed image */ - .word _kernel_start - .word _kernel_entry - - /* Here we have room for future flags */ - - .org 0x40 -reldate: - .word TIMESTAMP - - .org 0x50 -release: - .string VERSION diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal deleted file mode 100644 index 0864c963e188..000000000000 --- a/arch/mips/lasat/image/romscript.normal +++ /dev/null @@ -1,23 +0,0 @@ -OUTPUT_ARCH(mips) - -SECTIONS -{ - .text : - { - *(.text..start) - } - - /* Data in ROM */ - - .data ALIGN(0x10) : - { - *(.data) - } - _image_start = ADDR(.data); - _image_size = SIZEOF(.data); - - .other : - { - *(.*) - } -} diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c deleted file mode 100644 index 7965bbd0d319..000000000000 --- a/arch/mips/lasat/interrupt.c +++ /dev/null @@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * Routines for generic manipulation of the interrupts found on the - * Lasat boards. - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> - -#include <asm/irq_cpu.h> -#include <asm/lasat/lasat.h> -#include <asm/lasat/lasatint.h> - -#include <irq.h> - -static volatile int *lasat_int_status; -static volatile int *lasat_int_mask; -static volatile int lasat_int_mask_shift; - -void disable_lasat_irq(struct irq_data *d) -{ - unsigned int irq_nr = d->irq - LASAT_IRQ_BASE; - - *lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift; -} - -void enable_lasat_irq(struct irq_data *d) -{ - unsigned int irq_nr = d->irq - LASAT_IRQ_BASE; - - *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift; -} - -static struct irq_chip lasat_irq_type = { - .name = "Lasat", - .irq_mask = disable_lasat_irq, - .irq_unmask = enable_lasat_irq, -}; - -static inline int ls1bit32(unsigned int x) -{ - int b = 31, s; - - s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s; - s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s; - s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s; - s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s; - s = 1; if (x << 1 == 0) s = 0; b -= s; - - return b; -} - -static unsigned long (*get_int_status)(void); - -static unsigned long get_int_status_100(void) -{ - return *lasat_int_status & *lasat_int_mask; -} - -static unsigned long get_int_status_200(void) -{ - unsigned long int_status; - - int_status = *lasat_int_status; - int_status &= (int_status >> LASATINT_MASK_SHIFT_200) & 0xffff; - return int_status; -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long int_status; - unsigned int cause = read_c0_cause(); - int irq; - - if (cause & CAUSEF_IP7) { /* R4000 count / compare IRQ */ - do_IRQ(7); - return; - } - - int_status = get_int_status(); - - /* if int_status == 0, then the interrupt has already been cleared */ - if (int_status) { - irq = LASAT_IRQ_BASE + ls1bit32(int_status); - - do_IRQ(irq); - } -} - -void __init arch_init_irq(void) -{ - int irq = LASAT_CASCADE_IRQ; - int i; - - if (IS_LASAT_200()) { - lasat_int_status = (void *)LASAT_INT_STATUS_REG_200; - lasat_int_mask = (void *)LASAT_INT_MASK_REG_200; - lasat_int_mask_shift = LASATINT_MASK_SHIFT_200; - get_int_status = get_int_status_200; - *lasat_int_mask &= 0xffff; - } else { - lasat_int_status = (void *)LASAT_INT_STATUS_REG_100; - lasat_int_mask = (void *)LASAT_INT_MASK_REG_100; - lasat_int_mask_shift = LASATINT_MASK_SHIFT_100; - get_int_status = get_int_status_100; - *lasat_int_mask = 0; - } - - mips_cpu_irq_init(); - - for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++) - irq_set_chip_and_handler(i, &lasat_irq_type, handle_level_irq); - - if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL)) - pr_err("Failed to request irq %d (cascade)\n", irq); -} diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c deleted file mode 100644 index 80e1ba541148..000000000000 --- a/arch/mips/lasat/lasat_board.c +++ /dev/null @@ -1,268 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * Routines specific to the LASAT boards - */ -#include <linux/types.h> -#include <linux/crc32.h> -#include <asm/lasat/lasat.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/mutex.h> -#include <asm/addrspace.h> -#include "at93c.h" -/* New model description table */ -#include "lasat_models.h" - -static DEFINE_MUTEX(lasat_eeprom_mutex); - -#define EEPROM_CRC(data, len) (~crc32(~0, data, len)) - -struct lasat_info lasat_board_info; - -int EEPROMRead(unsigned int pos, unsigned char *data, int len) -{ - int i; - - for (i = 0; i < len; i++) - *data++ = at93c_read(pos++); - - return 0; -} - -int EEPROMWrite(unsigned int pos, unsigned char *data, int len) -{ - int i; - - for (i = 0; i < len; i++) - at93c_write(pos++, *data++); - - return 0; -} - -static void init_flash_sizes(void) -{ - unsigned long *lb = lasat_board_info.li_flashpart_base; - unsigned long *ls = lasat_board_info.li_flashpart_size; - int i; - - ls[LASAT_MTD_BOOTLOADER] = 0x40000; - ls[LASAT_MTD_SERVICE] = 0xC0000; - ls[LASAT_MTD_NORMAL] = 0x100000; - - if (!IS_LASAT_200()) { - lasat_board_info.li_flash_base = 0x1e000000; - - lb[LASAT_MTD_BOOTLOADER] = 0x1e400000; - - if (lasat_board_info.li_flash_size > 0x200000) { - ls[LASAT_MTD_CONFIG] = 0x100000; - ls[LASAT_MTD_FS] = 0x500000; - } - } else { - lasat_board_info.li_flash_base = 0x10000000; - - if (lasat_board_info.li_flash_size < 0x1000000) { - lb[LASAT_MTD_BOOTLOADER] = 0x10000000; - ls[LASAT_MTD_CONFIG] = 0x100000; - if (lasat_board_info.li_flash_size >= 0x400000) - ls[LASAT_MTD_FS] = - lasat_board_info.li_flash_size - 0x300000; - } - } - - for (i = 1; i < LASAT_MTD_LAST; i++) - lb[i] = lb[i-1] + ls[i-1]; -} - -int lasat_init_board_info(void) -{ - int c; - unsigned long crc; - unsigned long cfg0, cfg1; - const struct product_info *ppi; - int i_n_base_models = N_BASE_MODELS; - const char * const * i_txt_base_models = txt_base_models; - int i_n_prids = N_PRIDS; - - memset(&lasat_board_info, 0, sizeof(lasat_board_info)); - - /* First read the EEPROM info */ - EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info, - sizeof(struct lasat_eeprom_struct)); - - /* Check the CRC */ - crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info), - sizeof(struct lasat_eeprom_struct) - 4); - - if (crc != lasat_board_info.li_eeprom_info.crc32) { - printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM CRC does " - "not match calculated, attempting to soldier on...\n"); - } - - if (lasat_board_info.li_eeprom_info.version != LASAT_EEPROM_VERSION) { - printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM version " - "%d, wanted version %d, attempting to soldier on...\n", - (unsigned int)lasat_board_info.li_eeprom_info.version, - LASAT_EEPROM_VERSION); - } - - cfg0 = lasat_board_info.li_eeprom_info.cfg[0]; - cfg1 = lasat_board_info.li_eeprom_info.cfg[1]; - - if (LASAT_W0_DSCTYPE(cfg0) != 1) { - printk(KERN_WARNING "WARNING...\nWARNING...\n" - "Invalid configuration read from EEPROM, attempting to " - "soldier on..."); - } - /* We have a valid configuration */ - - switch (LASAT_W0_SDRAMBANKSZ(cfg0)) { - case 0: - lasat_board_info.li_memsize = 0x0800000; - break; - case 1: - lasat_board_info.li_memsize = 0x1000000; - break; - case 2: - lasat_board_info.li_memsize = 0x2000000; - break; - case 3: - lasat_board_info.li_memsize = 0x4000000; - break; - case 4: - lasat_board_info.li_memsize = 0x8000000; - break; - default: - lasat_board_info.li_memsize = 0; - } - - switch (LASAT_W0_SDRAMBANKS(cfg0)) { - case 0: - break; - case 1: - lasat_board_info.li_memsize *= 2; - break; - default: - break; - } - - switch (LASAT_W0_BUSSPEED(cfg0)) { - case 0x0: - lasat_board_info.li_bus_hz = 60000000; - break; - case 0x1: - lasat_board_info.li_bus_hz = 66000000; - break; - case 0x2: - lasat_board_info.li_bus_hz = 66666667; - break; - case 0x3: - lasat_board_info.li_bus_hz = 80000000; - break; - case 0x4: - lasat_board_info.li_bus_hz = 83333333; - break; - case 0x5: - lasat_board_info.li_bus_hz = 100000000; - break; - } - - switch (LASAT_W0_CPUCLK(cfg0)) { - case 0x0: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz; - break; - case 0x1: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz + - (lasat_board_info.li_bus_hz >> 1); - break; - case 0x2: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz + - lasat_board_info.li_bus_hz; - break; - case 0x3: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz + - lasat_board_info.li_bus_hz + - (lasat_board_info.li_bus_hz >> 1); - break; - case 0x4: - lasat_board_info.li_cpu_hz = - lasat_board_info.li_bus_hz + - lasat_board_info.li_bus_hz + - lasat_board_info.li_bus_hz; - break; - } - - /* Flash size */ - switch (LASAT_W1_FLASHSIZE(cfg1)) { - case 0: - lasat_board_info.li_flash_size = 0x200000; - break; - case 1: - lasat_board_info.li_flash_size = 0x400000; - break; - case 2: - lasat_board_info.li_flash_size = 0x800000; - break; - case 3: - lasat_board_info.li_flash_size = 0x1000000; - break; - case 4: - lasat_board_info.li_flash_size = 0x2000000; - break; - } - - init_flash_sizes(); - - lasat_board_info.li_bmid = LASAT_W0_BMID(cfg0); - lasat_board_info.li_prid = lasat_board_info.li_eeprom_info.prid; - if (lasat_board_info.li_prid == 0xffff || lasat_board_info.li_prid == 0) - lasat_board_info.li_prid = lasat_board_info.li_bmid; - - /* Base model stuff */ - if (lasat_board_info.li_bmid > i_n_base_models) - lasat_board_info.li_bmid = i_n_base_models; - strcpy(lasat_board_info.li_bmstr, - i_txt_base_models[lasat_board_info.li_bmid]); - - /* Product ID dependent values */ - c = lasat_board_info.li_prid; - if (c >= i_n_prids) { - strcpy(lasat_board_info.li_namestr, "Unknown Model"); - strcpy(lasat_board_info.li_typestr, "Unknown Type"); - } else { - ppi = &vendor_info_table[0].vi_product_info[c]; - strcpy(lasat_board_info.li_namestr, ppi->pi_name); - if (ppi->pi_type) - strcpy(lasat_board_info.li_typestr, ppi->pi_type); - else - sprintf(lasat_board_info.li_typestr, "%d", 10 * c); - } - - return 0; -} - -void lasat_write_eeprom_info(void) -{ - unsigned long crc; - - mutex_lock(&lasat_eeprom_mutex); - - /* Generate the CRC */ - crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info), - sizeof(struct lasat_eeprom_struct) - 4); - lasat_board_info.li_eeprom_info.crc32 = crc; - - /* Write the EEPROM info */ - EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info, - sizeof(struct lasat_eeprom_struct)); - - mutex_unlock(&lasat_eeprom_mutex); -} diff --git a/arch/mips/lasat/lasat_models.h b/arch/mips/lasat/lasat_models.h deleted file mode 100644 index 474e57342484..000000000000 --- a/arch/mips/lasat/lasat_models.h +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Model description tables - */ -#include <linux/kernel.h> - -struct product_info { - const char *pi_name; - const char *pi_type; -}; - -struct vendor_info { - const char *vi_name; - const struct product_info *vi_product_info; -}; - -/* - * Base models - */ -static const char * const txt_base_models[] = { - "MQ 2", "MQ Pro", "SP 25", "SP 50", "SP 100", "SP 5000", "SP 7000", - "SP 1000", "Unknown" -}; -#define N_BASE_MODELS (ARRAY_SIZE(txt_base_models) - 1) - -/* - * Eicon Networks - */ -static const char txt_en_mq[] = "Masquerade"; -static const char txt_en_sp[] = "Safepipe"; - -static const struct product_info product_info_eicon[] = { - { txt_en_mq, "II" }, /* 0 */ - { txt_en_mq, "Pro" }, /* 1 */ - { txt_en_sp, "25" }, /* 2 */ - { txt_en_sp, "50" }, /* 3 */ - { txt_en_sp, "100" }, /* 4 */ - { txt_en_sp, "5000" }, /* 5 */ - { txt_en_sp, "7000" }, /* 6 */ - { txt_en_sp, "30" }, /* 7 */ - { txt_en_sp, "5100" }, /* 8 */ - { txt_en_sp, "7100" }, /* 9 */ - { txt_en_sp, "1110" }, /* 10 */ - { txt_en_sp, "3020" }, /* 11 */ - { txt_en_sp, "3030" }, /* 12 */ - { txt_en_sp, "5020" }, /* 13 */ - { txt_en_sp, "5030" }, /* 14 */ - { txt_en_sp, "1120" }, /* 15 */ - { txt_en_sp, "1130" }, /* 16 */ - { txt_en_sp, "6010" }, /* 17 */ - { txt_en_sp, "6110" }, /* 18 */ - { txt_en_sp, "6210" }, /* 19 */ - { txt_en_sp, "1020" }, /* 20 */ - { txt_en_sp, "1040" }, /* 21 */ - { txt_en_sp, "1050" }, /* 22 */ - { txt_en_sp, "1060" }, /* 23 */ -}; - -#define N_PRIDS ARRAY_SIZE(product_info_eicon) - -/* - * The vendor table - */ -static struct vendor_info const vendor_info_table[] = { - { "Eicon Networks", product_info_eicon }, -}; - -#define N_VENDORS ARRAY_SIZE(vendor_info_table) diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c deleted file mode 100644 index 08298ccf5ccf..000000000000 --- a/arch/mips/lasat/picvue.c +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Picvue PVC160206 display driver - * - * Brian Murphy <brian@murphy.dk> - * - */ -#include <linux/kernel.h> -#include <linux/delay.h> -#include <asm/bootinfo.h> -#include <asm/lasat/lasat.h> -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/string.h> - -#include "picvue.h" - -#define PVC_BUSY 0x80 -#define PVC_NLINES 2 -#define PVC_DISPMEM 80 -#define PVC_LINELEN PVC_DISPMEM / PVC_NLINES - -struct pvc_defs *picvue; - -static void pvc_reg_write(u32 val) -{ - *picvue->reg = val; -} - -static u32 pvc_reg_read(void) -{ - u32 tmp = *picvue->reg; - return tmp; -} - -static void pvc_write_byte(u32 data, u8 byte) -{ - data |= picvue->e; - pvc_reg_write(data); - data &= ~picvue->data_mask; - data |= byte << picvue->data_shift; - pvc_reg_write(data); - ndelay(220); - pvc_reg_write(data & ~picvue->e); - ndelay(220); -} - -static u8 pvc_read_byte(u32 data) -{ - u8 byte; - - data |= picvue->e; - pvc_reg_write(data); - ndelay(220); - byte = (pvc_reg_read() & picvue->data_mask) >> picvue->data_shift; - data &= ~picvue->e; - pvc_reg_write(data); - ndelay(220); - return byte; -} - -static u8 pvc_read_data(void) -{ - u32 data = pvc_reg_read(); - u8 byte; - data |= picvue->rw; - data &= ~picvue->rs; - pvc_reg_write(data); - ndelay(40); - byte = pvc_read_byte(data); - data |= picvue->rs; - pvc_reg_write(data); - return byte; -} - -#define TIMEOUT 1000 -static int pvc_wait(void) -{ - int i = TIMEOUT; - int err = 0; - - while ((pvc_read_data() & PVC_BUSY) && i) - i--; - if (i == 0) - err = -ETIME; - - return err; -} - -#define MODE_INST 0 -#define MODE_DATA 1 -static void pvc_write(u8 byte, int mode) -{ - u32 data = pvc_reg_read(); - data &= ~picvue->rw; - if (mode == MODE_DATA) - data |= picvue->rs; - else - data &= ~picvue->rs; - pvc_reg_write(data); - ndelay(40); - pvc_write_byte(data, byte); - if (mode == MODE_DATA) - data &= ~picvue->rs; - else - data |= picvue->rs; - pvc_reg_write(data); - pvc_wait(); -} - -void pvc_write_string(const unsigned char *str, u8 addr, int line) -{ - int i = 0; - - if (line > 0 && (PVC_NLINES > 1)) - addr += 0x40 * line; - pvc_write(0x80 | addr, MODE_INST); - - while (*str != 0 && i < PVC_LINELEN) { - pvc_write(*str++, MODE_DATA); - i++; - } -} - -void pvc_write_string_centered(const unsigned char *str, int line) -{ - int len = strlen(str); - u8 addr; - - if (len > PVC_VISIBLE_CHARS) - addr = 0; - else - addr = (PVC_VISIBLE_CHARS - strlen(str))/2; - - pvc_write_string(str, addr, line); -} - -void pvc_dump_string(const unsigned char *str) -{ - int len = strlen(str); - - pvc_write_string(str, 0, 0); - if (len > PVC_VISIBLE_CHARS) - pvc_write_string(&str[PVC_VISIBLE_CHARS], 0, 1); -} - -#define BM_SIZE 8 -#define MAX_PROGRAMMABLE_CHARS 8 -int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]) -{ - int i; - int addr; - - if (charnum > MAX_PROGRAMMABLE_CHARS) - return -ENOENT; - - addr = charnum * 8; - pvc_write(0x40 | addr, MODE_INST); - - for (i = 0; i < BM_SIZE; i++) - pvc_write(bitmap[i], MODE_DATA); - return 0; -} - -#define FUNC_SET_CMD 0x20 -#define EIGHT_BYTE (1 << 4) -#define FOUR_BYTE 0 -#define TWO_LINES (1 << 3) -#define ONE_LINE 0 -#define LARGE_FONT (1 << 2) -#define SMALL_FONT 0 - -static void pvc_funcset(u8 cmd) -{ - pvc_write(FUNC_SET_CMD | (cmd & (EIGHT_BYTE|TWO_LINES|LARGE_FONT)), - MODE_INST); -} - -#define ENTRYMODE_CMD 0x4 -#define AUTO_INC (1 << 1) -#define AUTO_DEC 0 -#define CURSOR_FOLLOWS_DISP (1 << 0) - -static void pvc_entrymode(u8 cmd) -{ - pvc_write(ENTRYMODE_CMD | (cmd & (AUTO_INC|CURSOR_FOLLOWS_DISP)), - MODE_INST); -} - -#define DISP_CNT_CMD 0x08 -#define DISP_OFF 0 -#define DISP_ON (1 << 2) -#define CUR_ON (1 << 1) -#define CUR_BLINK (1 << 0) -void pvc_dispcnt(u8 cmd) -{ - pvc_write(DISP_CNT_CMD | (cmd & (DISP_ON|CUR_ON|CUR_BLINK)), MODE_INST); -} - -#define MOVE_CMD 0x10 -#define DISPLAY (1 << 3) -#define CURSOR 0 -#define RIGHT (1 << 2) -#define LEFT 0 -void pvc_move(u8 cmd) -{ - pvc_write(MOVE_CMD | (cmd & (DISPLAY|RIGHT)), MODE_INST); -} - -#define CLEAR_CMD 0x1 -void pvc_clear(void) -{ - pvc_write(CLEAR_CMD, MODE_INST); -} - -#define HOME_CMD 0x2 -void pvc_home(void) -{ - pvc_write(HOME_CMD, MODE_INST); -} - -int pvc_init(void) -{ - u8 cmd = EIGHT_BYTE; - - if (PVC_NLINES == 2) - cmd |= (SMALL_FONT|TWO_LINES); - else - cmd |= (LARGE_FONT|ONE_LINE); - pvc_funcset(cmd); - pvc_dispcnt(DISP_ON); - pvc_entrymode(AUTO_INC); - - pvc_clear(); - pvc_write_string_centered("Display", 0); - pvc_write_string_centered("Initialized", 1); - - return 0; -} - -module_init(pvc_init); -MODULE_LICENSE("GPL"); diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h deleted file mode 100644 index 161d3bf50811..000000000000 --- a/arch/mips/lasat/picvue.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Picvue PVC160206 display driver - * - * Brian Murphy <brian.murphy@eicon.com> - * - */ -struct pvc_defs { - volatile u32 *reg; - u32 data_shift; - u32 data_mask; - u32 e; - u32 rw; - u32 rs; -}; - -extern struct pvc_defs *picvue; - -#define PVC_NLINES 2 -#define PVC_DISPMEM 80 -#define PVC_LINELEN PVC_DISPMEM / PVC_NLINES -#define PVC_VISIBLE_CHARS 16 - -void pvc_write_string(const unsigned char *str, u8 addr, int line); -void pvc_write_string_centered(const unsigned char *str, int line); -void pvc_dump_string(const unsigned char *str); - -#define BM_SIZE 8 -#define MAX_PROGRAMMABLE_CHARS 8 -int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]); - -void pvc_dispcnt(u8 cmd); -#define DISP_OFF 0 -#define DISP_ON (1 << 2) -#define CUR_ON (1 << 1) -#define CUR_BLINK (1 << 0) - -void pvc_move(u8 cmd); -#define DISPLAY (1 << 3) -#define CURSOR 0 -#define RIGHT (1 << 2) -#define LEFT 0 - -void pvc_clear(void); -void pvc_home(void); diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c deleted file mode 100644 index 61c033494af5..000000000000 --- a/arch/mips/lasat/picvue_proc.c +++ /dev/null @@ -1,208 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Picvue PVC160206 display driver - * - * Brian Murphy <brian.murphy@eicon.com> - * - */ -#include <linux/bug.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/errno.h> - -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/interrupt.h> - -#include <linux/timer.h> -#include <linux/mutex.h> -#include <linux/uaccess.h> - -#include "picvue.h" - -static DEFINE_MUTEX(pvc_mutex); -static char pvc_lines[PVC_NLINES][PVC_LINELEN+1]; -static int pvc_linedata[PVC_NLINES]; -static char *pvc_linename[PVC_NLINES] = {"line1", "line2"}; -#define DISPLAY_DIR_NAME "display" -static int scroll_dir, scroll_interval; - -static struct timer_list timer; - -static void pvc_display(unsigned long data) -{ - int i; - - pvc_clear(); - for (i = 0; i < PVC_NLINES; i++) - pvc_write_string(pvc_lines[i], 0, i); -} - -static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0); - -static int pvc_line_proc_show(struct seq_file *m, void *v) -{ - int lineno = *(int *)m->private; - - if (lineno < 0 || lineno >= PVC_NLINES) { - printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno); - return 0; - } - - mutex_lock(&pvc_mutex); - seq_printf(m, "%s\n", pvc_lines[lineno]); - mutex_unlock(&pvc_mutex); - - return 0; -} - -static int pvc_line_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, pvc_line_proc_show, PDE_DATA(inode)); -} - -static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf, - size_t count, loff_t *pos) -{ - int lineno = *(int *)PDE_DATA(file_inode(file)); - char kbuf[PVC_LINELEN]; - size_t len; - - BUG_ON(lineno < 0 || lineno >= PVC_NLINES); - - len = min(count, sizeof(kbuf) - 1); - if (copy_from_user(kbuf, buf, len)) - return -EFAULT; - kbuf[len] = '\0'; - - if (len > 0 && kbuf[len - 1] == '\n') - len--; - - mutex_lock(&pvc_mutex); - strncpy(pvc_lines[lineno], kbuf, len); - pvc_lines[lineno][len] = '\0'; - mutex_unlock(&pvc_mutex); - - tasklet_schedule(&pvc_display_tasklet); - - return count; -} - -static const struct proc_ops pvc_line_proc_ops = { - .proc_open = pvc_line_proc_open, - .proc_read = seq_read, - .proc_lseek = seq_lseek, - .proc_release = single_release, - .proc_write = pvc_line_proc_write, -}; - -static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf, - size_t count, loff_t *pos) -{ - char kbuf[42]; - size_t len; - int cmd; - - len = min(count, sizeof(kbuf) - 1); - if (copy_from_user(kbuf, buf, len)) - return -EFAULT; - kbuf[len] = '\0'; - - cmd = simple_strtol(kbuf, NULL, 10); - - mutex_lock(&pvc_mutex); - if (scroll_interval != 0) - del_timer(&timer); - - if (cmd == 0) { - scroll_dir = 0; - scroll_interval = 0; - } else { - if (cmd < 0) { - scroll_dir = -1; - scroll_interval = -cmd; - } else { - scroll_dir = 1; - scroll_interval = cmd; - } - add_timer(&timer); - } - mutex_unlock(&pvc_mutex); - - return count; -} - -static int pvc_scroll_proc_show(struct seq_file *m, void *v) -{ - mutex_lock(&pvc_mutex); - seq_printf(m, "%d\n", scroll_dir * scroll_interval); - mutex_unlock(&pvc_mutex); - - return 0; -} - -static int pvc_scroll_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, pvc_scroll_proc_show, NULL); -} - -static const struct proc_ops pvc_scroll_proc_ops = { - .proc_open = pvc_scroll_proc_open, - .proc_read = seq_read, - .proc_lseek = seq_lseek, - .proc_release = single_release, - .proc_write = pvc_scroll_proc_write, -}; - -void pvc_proc_timerfunc(struct timer_list *unused) -{ - if (scroll_dir < 0) - pvc_move(DISPLAY|RIGHT); - else if (scroll_dir > 0) - pvc_move(DISPLAY|LEFT); - - timer.expires = jiffies + scroll_interval; - add_timer(&timer); -} - -static void pvc_proc_cleanup(void) -{ - remove_proc_subtree(DISPLAY_DIR_NAME, NULL); - del_timer_sync(&timer); -} - -static int __init pvc_proc_init(void) -{ - struct proc_dir_entry *dir, *proc_entry; - int i; - - dir = proc_mkdir(DISPLAY_DIR_NAME, NULL); - if (dir == NULL) - goto error; - - for (i = 0; i < PVC_NLINES; i++) { - strcpy(pvc_lines[i], ""); - pvc_linedata[i] = i; - } - for (i = 0; i < PVC_NLINES; i++) { - proc_entry = proc_create_data(pvc_linename[i], 0644, dir, - &pvc_line_proc_ops, &pvc_linedata[i]); - if (proc_entry == NULL) - goto error; - } - proc_entry = proc_create("scroll", 0644, dir, &pvc_scroll_proc_ops); - if (proc_entry == NULL) - goto error; - - timer_setup(&timer, pvc_proc_timerfunc, 0); - - return 0; -error: - pvc_proc_cleanup(); - return -ENOMEM; -} - -module_init(pvc_proc_init); -module_exit(pvc_proc_cleanup); -MODULE_LICENSE("GPL"); diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c deleted file mode 100644 index 5ce1407de2d5..000000000000 --- a/arch/mips/lasat/prom.c +++ /dev/null @@ -1,126 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * PROM interface routines. - */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/memblock.h> -#include <linux/ioport.h> -#include <asm/bootinfo.h> -#include <asm/lasat/lasat.h> -#include <asm/cpu.h> -#include <asm/setup.h> - -#include "at93c.h" -#include <asm/lasat/eeprom.h> -#include "prom.h" - -#define RESET_VECTOR 0xbfc00000 -#define PROM_JUMP_TABLE_ENTRY(n) (*((u32 *)(RESET_VECTOR + 0x20) + n)) -#define PROM_DISPLAY_ADDR PROM_JUMP_TABLE_ENTRY(0) -#define PROM_PUTC_ADDR PROM_JUMP_TABLE_ENTRY(1) -#define PROM_MONITOR_ADDR PROM_JUMP_TABLE_ENTRY(2) - -static void null_prom_display(const char *string, int pos, int clear) -{ -} - -static void null_prom_monitor(void) -{ -} - -static void null_prom_putc(char c) -{ -} - -/* these are functions provided by the bootloader */ -static void (*__prom_putc)(char c) = null_prom_putc; - -void prom_putchar(char c) -{ - __prom_putc(c); -} - -void (*prom_display)(const char *string, int pos, int clear) = - null_prom_display; -void (*prom_monitor)(void) = null_prom_monitor; - -unsigned int lasat_ndelay_divider; - -static void setup_prom_vectors(void) -{ - u32 version = *(u32 *)(RESET_VECTOR + 0x90); - - if (version >= 307) { - prom_display = (void *)PROM_DISPLAY_ADDR; - __prom_putc = (void *)PROM_PUTC_ADDR; - prom_monitor = (void *)PROM_MONITOR_ADDR; - } - printk(KERN_DEBUG "prom vectors set up\n"); -} - -static struct at93c_defs at93c_defs[N_MACHTYPES] = { - { - .reg = (void *)AT93C_REG_100, - .rdata_reg = (void *)AT93C_RDATA_REG_100, - .rdata_shift = AT93C_RDATA_SHIFT_100, - .wdata_shift = AT93C_WDATA_SHIFT_100, - .cs = AT93C_CS_M_100, - .clk = AT93C_CLK_M_100 - }, { - .reg = (void *)AT93C_REG_200, - .rdata_reg = (void *)AT93C_RDATA_REG_200, - .rdata_shift = AT93C_RDATA_SHIFT_200, - .wdata_shift = AT93C_WDATA_SHIFT_200, - .cs = AT93C_CS_M_200, - .clk = AT93C_CLK_M_200 - }, -}; - -void __init prom_init(void) -{ - int argc = fw_arg0; - char **argv = (char **) fw_arg1; - - setup_prom_vectors(); - - if (IS_LASAT_200()) { - printk(KERN_INFO "LASAT 200 board\n"); - lasat_ndelay_divider = LASAT_200_DIVIDER; - at93c = &at93c_defs[1]; - } else { - printk(KERN_INFO "LASAT 100 board\n"); - lasat_ndelay_divider = LASAT_100_DIVIDER; - at93c = &at93c_defs[0]; - } - - lasat_init_board_info(); /* Read info from EEPROM */ - - /* Get the command line */ - if (argc > 0) { - strncpy(arcs_cmdline, argv[0], COMMAND_LINE_SIZE-1); - arcs_cmdline[COMMAND_LINE_SIZE-1] = '\0'; - } - - /* Set the I/O base address */ - set_io_port_base(KSEG1); - - /* Set memory regions */ - ioport_resource.start = 0; - ioport_resource.end = 0xffffffff; /* Wrong, fixme. */ - - add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM); -} - -void __init prom_free_prom_memory(void) -{ -} - -const char *get_system_type(void) -{ - return lasat_board_info.li_bmstr; -} diff --git a/arch/mips/lasat/prom.h b/arch/mips/lasat/prom.h deleted file mode 100644 index 3d1df853e9d3..000000000000 --- a/arch/mips/lasat/prom.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __PROM_H -#define __PROM_H - -extern void (*prom_display)(const char *string, int pos, int clear); -extern void (*prom_monitor)(void); - -#endif /* __PROM_H */ diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c deleted file mode 100644 index 7c516ed9af15..000000000000 --- a/arch/mips/lasat/reset.c +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * Reset the LASAT board. - */ -#include <linux/kernel.h> -#include <linux/pm.h> - -#include <asm/reboot.h> -#include <asm/lasat/lasat.h> - -#include "picvue.h" -#include "prom.h" - -static void lasat_machine_restart(char *command); -static void lasat_machine_halt(void); - -/* Used to set machine to boot in service mode via /proc interface */ -int lasat_boot_to_service; - -static void lasat_machine_restart(char *command) -{ - local_irq_disable(); - - if (lasat_boot_to_service) { - *(volatile unsigned int *)0xa0000024 = 0xdeadbeef; - *(volatile unsigned int *)0xa00000fc = 0xfedeabba; - } - *lasat_misc->reset_reg = 0xbedead; - for (;;) ; -} - -static void lasat_machine_halt(void) -{ - local_irq_disable(); - - prom_monitor(); - for (;;) ; -} - -void lasat_reboot_setup(void) -{ - _machine_restart = lasat_machine_restart; - _machine_halt = lasat_machine_halt; - pm_power_off = lasat_machine_halt; -} diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c deleted file mode 100644 index 16b242713420..000000000000 --- a/arch/mips/lasat/serial.c +++ /dev/null @@ -1,80 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Registration of Lasat UART platform device. - * - * Copyright (C) 2007 Brian Murphy <brian@murphy.dk> - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> - -#include <asm/lasat/lasat.h> -#include <asm/lasat/serial.h> - -static struct resource lasat_serial_res[2] __initdata; - -static struct plat_serial8250_port lasat_serial8250_port[] = { - { - .iotype = UPIO_MEM, - .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | - UPF_SKIP_TEST, - }, - {}, -}; - -static __init int lasat_uart_add(void) -{ - struct platform_device *pdev; - int retval; - - pdev = platform_device_alloc("serial8250", -1); - if (!pdev) - return -ENOMEM; - - if (!IS_LASAT_200()) { - lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100); - lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1; - lasat_serial_res[0].flags = IORESOURCE_MEM; - lasat_serial_res[1].start = LASATINT_UART_100; - lasat_serial_res[1].end = LASATINT_UART_100; - lasat_serial_res[1].flags = IORESOURCE_IRQ; - - lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_100; - lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_100 * 16; - lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_100; - lasat_serial8250_port[0].irq = LASATINT_UART_100; - } else { - lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_200); - lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_200 * 8 - 1; - lasat_serial_res[0].flags = IORESOURCE_MEM; - lasat_serial_res[1].start = LASATINT_UART_200; - lasat_serial_res[1].end = LASATINT_UART_200; - lasat_serial_res[1].flags = IORESOURCE_IRQ; - - lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_200; - lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_200 * 16; - lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_200; - lasat_serial8250_port[0].irq = LASATINT_UART_200; - } - - pdev->id = PLAT8250_DEV_PLATFORM; - pdev->dev.platform_data = lasat_serial8250_port; - - retval = platform_device_add_resources(pdev, lasat_serial_res, ARRAY_SIZE(lasat_serial_res)); - if (retval) - goto err_free_device; - - retval = platform_device_add(pdev); - if (retval) - goto err_free_device; - - return 0; - -err_free_device: - platform_device_put(pdev); - - return retval; -} -device_initcall(lasat_uart_add); diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c deleted file mode 100644 index 0743243fd86d..000000000000 --- a/arch/mips/lasat/setup.c +++ /dev/null @@ -1,141 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved. - * - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * Brian Murphy <brian@murphy.dk> - * - * Lasat specific setup. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/tty.h> - -#include <asm/time.h> -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/lasat/lasat.h> -#include <asm/lasat/serial.h> - -#ifdef CONFIG_PICVUE -#include <linux/notifier.h> -#endif - -#include "ds1603.h" -#include <asm/lasat/ds1603.h> -#include <asm/lasat/picvue.h> -#include <asm/lasat/eeprom.h> - -#include "prom.h" - -int lasat_command_line; -void lasatint_init(void); - -extern void lasat_reboot_setup(void); -extern void pcisetup(void); -extern void edhac_init(void *, void *, void *); -extern void addrflt_init(void); - -struct lasat_misc lasat_misc_info[N_MACHTYPES] = { - { - .reset_reg = (void *)KSEG1ADDR(0x1c840000), - .flash_wp_reg = (void *)KSEG1ADDR(0x1c800000), 2 - }, { - .reset_reg = (void *)KSEG1ADDR(0x11080000), - .flash_wp_reg = (void *)KSEG1ADDR(0x11000000), 6 - } -}; - -struct lasat_misc *lasat_misc; - -#ifdef CONFIG_DS1603 -static struct ds_defs ds_defs[N_MACHTYPES] = { - { (void *)DS1603_REG_100, (void *)DS1603_REG_100, - DS1603_RST_100, DS1603_CLK_100, DS1603_DATA_100, - DS1603_DATA_SHIFT_100, 0, 0 }, - { (void *)DS1603_REG_200, (void *)DS1603_DATA_REG_200, - DS1603_RST_200, DS1603_CLK_200, DS1603_DATA_200, - DS1603_DATA_READ_SHIFT_200, 1, 2000 } -}; -#endif - -#ifdef CONFIG_PICVUE -#include "picvue.h" -static struct pvc_defs pvc_defs[N_MACHTYPES] = { - { (void *)PVC_REG_100, PVC_DATA_SHIFT_100, PVC_DATA_M_100, - PVC_E_100, PVC_RW_100, PVC_RS_100 }, - { (void *)PVC_REG_200, PVC_DATA_SHIFT_200, PVC_DATA_M_200, - PVC_E_200, PVC_RW_200, PVC_RS_200 } -}; -#endif - -static int lasat_panic_display(struct notifier_block *this, - unsigned long event, void *ptr) -{ -#ifdef CONFIG_PICVUE - unsigned char *string = ptr; - if (string == NULL) - string = "Kernel Panic"; - pvc_dump_string(string); -#endif - return NOTIFY_DONE; -} - -static int lasat_panic_prom_monitor(struct notifier_block *this, - unsigned long event, void *ptr) -{ - prom_monitor(); - return NOTIFY_DONE; -} - -static struct notifier_block lasat_panic_block[] = -{ - { - .notifier_call = lasat_panic_display, - .priority = INT_MAX - }, { - .notifier_call = lasat_panic_prom_monitor, - .priority = INT_MIN - } -}; - -void __init plat_time_init(void) -{ - mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2; - - change_c0_status(ST0_IM, IE_IRQ0); -} - -void __init plat_mem_setup(void) -{ - int i; - int lasat_type = IS_LASAT_200() ? 1 : 0; - - lasat_misc = &lasat_misc_info[lasat_type]; -#ifdef CONFIG_PICVUE - picvue = &pvc_defs[lasat_type]; -#endif - - /* Set up panic notifier */ - for (i = 0; i < ARRAY_SIZE(lasat_panic_block); i++) - atomic_notifier_chain_register(&panic_notifier_list, - &lasat_panic_block[i]); - - lasat_reboot_setup(); - -#ifdef CONFIG_DS1603 - ds1603 = &ds_defs[lasat_type]; -#endif - -#ifdef DYNAMIC_SERIAL_INIT - serial_init(); -#endif - - pr_info("Lasat specific initialization complete\n"); -} diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c deleted file mode 100644 index e666fe26c50d..000000000000 --- a/arch/mips/lasat/sysctl.c +++ /dev/null @@ -1,268 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Thomas Horsten <thh@lasat.com> - * Copyright (C) 2000 LASAT Networks A/S. - * - * Routines specific to the LASAT boards - */ -#include <linux/types.h> -#include <asm/lasat/lasat.h> - -#include <linux/sysctl.h> -#include <linux/stddef.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/net.h> -#include <linux/inet.h> -#include <linux/uaccess.h> - -#include <asm/time.h> - -#ifdef CONFIG_DS1603 -#include "ds1603.h" -#endif - - -/* And the same for proc */ -int proc_dolasatstring(struct ctl_table *table, int write, - void *buffer, size_t *lenp, loff_t *ppos) -{ - int r; - - r = proc_dostring(table, write, buffer, lenp, ppos); - if ((!write) || r) - return r; - - lasat_write_eeprom_info(); - - return 0; -} - -#ifdef CONFIG_DS1603 -static int rtctmp; - -/* proc function to read/write RealTime Clock */ -int proc_dolasatrtc(struct ctl_table *table, int write, - void *buffer, size_t *lenp, loff_t *ppos) -{ - struct timespec64 ts; - int r; - - if (!write) { - read_persistent_clock64(&ts); - rtctmp = ts.tv_sec; - /* check for time < 0 and set to 0 */ - if (rtctmp < 0) - rtctmp = 0; - } - r = proc_dointvec(table, write, buffer, lenp, ppos); - if (r) - return r; - - if (write) { - /* - * Due to the RTC hardware limitation, we can not actually - * use the full 64-bit range here. - */ - ts.tv_sec = rtctmp; - ts.tv_nsec = 0; - - update_persistent_clock64(ts); - } - - return 0; -} -#endif - -#ifdef CONFIG_INET -int proc_lasat_ip(struct ctl_table *table, int write, - void *buffer, size_t *lenp, loff_t *ppos) -{ - unsigned int ip; - char *p, c; - int len; - char ipbuf[32]; - - if (!table->data || !table->maxlen || !*lenp || - (*ppos && !write)) { - *lenp = 0; - return 0; - } - - if (write) { - len = 0; - p = buffer; - while (len < *lenp) { - if (get_user(c, p++)) - return -EFAULT; - if (c == 0 || c == '\n') - break; - len++; - } - if (len >= sizeof(ipbuf)-1) - len = sizeof(ipbuf) - 1; - if (copy_from_user(ipbuf, buffer, len)) - return -EFAULT; - ipbuf[len] = 0; - *ppos += *lenp; - /* Now see if we can convert it to a valid IP */ - ip = in_aton(ipbuf); - *(unsigned int *)(table->data) = ip; - lasat_write_eeprom_info(); - } else { - ip = *(unsigned int *)(table->data); - sprintf(ipbuf, "%d.%d.%d.%d", - (ip) & 0xff, - (ip >> 8) & 0xff, - (ip >> 16) & 0xff, - (ip >> 24) & 0xff); - len = strlen(ipbuf); - if (len > *lenp) - len = *lenp; - if (len) - if (copy_to_user(buffer, ipbuf, len)) - return -EFAULT; - if (len < *lenp) { - if (put_user('\n', ((char *) buffer) + len)) - return -EFAULT; - len++; - } - *lenp = len; - *ppos += len; - } - - return 0; -} -#endif - -int proc_lasat_prid(struct ctl_table *table, int write, - void *buffer, size_t *lenp, loff_t *ppos) -{ - int r; - - r = proc_dointvec(table, write, buffer, lenp, ppos); - if (r < 0) - return r; - if (write) { - lasat_board_info.li_eeprom_info.prid = - lasat_board_info.li_prid; - lasat_write_eeprom_info(); - lasat_init_board_info(); - } - return 0; -} - -extern int lasat_boot_to_service; - -static struct ctl_table lasat_table[] = { - { - .procname = "cpu-hz", - .data = &lasat_board_info.li_cpu_hz, - .maxlen = sizeof(int), - .mode = 0444, - .proc_handler = proc_dointvec, - }, - { - .procname = "bus-hz", - .data = &lasat_board_info.li_bus_hz, - .maxlen = sizeof(int), - .mode = 0444, - .proc_handler = proc_dointvec, - }, - { - .procname = "bmid", - .data = &lasat_board_info.li_bmid, - .maxlen = sizeof(int), - .mode = 0444, - .proc_handler = proc_dointvec, - }, - { - .procname = "prid", - .data = &lasat_board_info.li_prid, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_lasat_prid, - }, -#ifdef CONFIG_INET - { - .procname = "ipaddr", - .data = &lasat_board_info.li_eeprom_info.ipaddr, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_lasat_ip, - }, - { - .procname = "netmask", - .data = &lasat_board_info.li_eeprom_info.netmask, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_lasat_ip, - }, -#endif - { - .procname = "passwd_hash", - .data = &lasat_board_info.li_eeprom_info.passwd_hash, - .maxlen = - sizeof(lasat_board_info.li_eeprom_info.passwd_hash), - .mode = 0600, - .proc_handler = proc_dolasatstring, - }, - { - .procname = "boot-service", - .data = &lasat_boot_to_service, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec, - }, -#ifdef CONFIG_DS1603 - { - .procname = "rtc", - .data = &rtctmp, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dolasatrtc, - }, -#endif - { - .procname = "namestr", - .data = &lasat_board_info.li_namestr, - .maxlen = sizeof(lasat_board_info.li_namestr), - .mode = 0444, - .proc_handler = proc_dostring, - }, - { - .procname = "typestr", - .data = &lasat_board_info.li_typestr, - .maxlen = sizeof(lasat_board_info.li_typestr), - .mode = 0444, - .proc_handler = proc_dostring, - }, - {} -}; - -static struct ctl_table lasat_root_table[] = { - { - .procname = "lasat", - .mode = 0555, - .child = lasat_table - }, - {} -}; - -static int __init lasat_register_sysctl(void) -{ - struct ctl_table_header *lasat_table_header; - - lasat_table_header = - register_sysctl_table(lasat_root_table); - if (!lasat_table_header) { - printk(KERN_ERR "Unable to register LASAT sysctl\n"); - return -ENOMEM; - } - - return 0; -} - -arch_initcall(lasat_register_sysctl); diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index fda7b57b826e..87fda0713b84 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -279,7 +279,8 @@ EXPORT_SYMBOL(csum_partial) #endif /* odd buffer alignment? */ -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64) +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ + defined(CONFIG_CPU_LOONGSON64) .set push .set arch=mips32r2 wsbh v1, sum @@ -732,7 +733,8 @@ EXPORT_SYMBOL(csum_partial) addu sum, v1 #endif -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64) +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ + defined(CONFIG_CPU_LOONGSON64) .set push .set arch=mips32r2 wsbh v1, sum diff --git a/arch/mips/loongson2ef/Kconfig b/arch/mips/loongson2ef/Kconfig index 595dd48e1e4d..96dc6eba4310 100644 --- a/arch/mips/loongson2ef/Kconfig +++ b/arch/mips/loongson2ef/Kconfig @@ -46,7 +46,6 @@ config LEMOTE_MACH2F select CSRC_R4K if ! MIPS_EXTERNAL_TIMER select DMA_NONCOHERENT select GENERIC_ISA_DMA_SUPPORT_BROKEN - select HAVE_CLK select FORCE_PCI select I8259 select IRQ_MIPS_CPU diff --git a/arch/mips/loongson2ef/Platform b/arch/mips/loongson2ef/Platform index 3aca42963f35..cdad3c1a9a18 100644 --- a/arch/mips/loongson2ef/Platform +++ b/arch/mips/loongson2ef/Platform @@ -26,7 +26,6 @@ endif # Loongson Machines' Support # -platform-$(CONFIG_MACH_LOONGSON2EF) += loongson2ef/ cflags-$(CONFIG_MACH_LOONGSON2EF) += -I$(srctree)/arch/mips/include/asm/mach-loongson2ef -mno-branch-likely load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 diff --git a/arch/mips/loongson2ef/common/init.c b/arch/mips/loongson2ef/common/init.c index 45512178be77..ce3f02f75e2a 100644 --- a/arch/mips/loongson2ef/common/init.c +++ b/arch/mips/loongson2ef/common/init.c @@ -19,10 +19,10 @@ unsigned long __maybe_unused _loongson_addrwincfg_base; static void __init mips_nmi_setup(void) { void *base; - extern char except_vec_nmi; + extern char except_vec_nmi[]; base = (void *)(CAC_BASE + 0x380); - memcpy(base, &except_vec_nmi, 0x80); + memcpy(base, except_vec_nmi, 0x80); flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); } diff --git a/arch/mips/loongson2ef/lemote-2f/clock.c b/arch/mips/loongson2ef/lemote-2f/clock.c index 414f282c8ab5..850b6b9f8f15 100644 --- a/arch/mips/loongson2ef/lemote-2f/clock.c +++ b/arch/mips/loongson2ef/lemote-2f/clock.c @@ -6,22 +6,12 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include <linux/clk.h> #include <linux/cpufreq.h> #include <linux/errno.h> #include <linux/export.h> -#include <linux/list.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include <asm/clock.h> #include <asm/mach-loongson2ef/loongson.h> -static LIST_HEAD(clock_list); -static DEFINE_SPINLOCK(clock_lock); -static DEFINE_MUTEX(clock_list_sem); - -/* Minimum CLK support */ enum { DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT, DC_87PT, DC_DISABLE, DC_RESV @@ -41,103 +31,21 @@ struct cpufreq_frequency_table loongson2_clockmod_table[] = { }; EXPORT_SYMBOL_GPL(loongson2_clockmod_table); -static struct clk cpu_clk = { - .name = "cpu_clk", - .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, - .rate = 800000000, -}; - -struct clk *clk_get(struct device *dev, const char *id) -{ - return &cpu_clk; -} -EXPORT_SYMBOL(clk_get); - -static void propagate_rate(struct clk *clk) -{ - struct clk *clkp; - - list_for_each_entry(clkp, &clock_list, node) { - if (likely(clkp->parent != clk)) - continue; - if (likely(clkp->ops && clkp->ops->recalc)) - clkp->ops->recalc(clkp); - if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) - propagate_rate(clkp); - } -} - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) +int loongson2_cpu_set_rate(unsigned long rate_khz) { -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (!clk) - return 0; - - return (unsigned long)clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int rate_khz = rate / 1000; struct cpufreq_frequency_table *pos; - int ret = 0; int regval; - if (likely(clk->ops && clk->ops->set_rate)) { - unsigned long flags; - - spin_lock_irqsave(&clock_lock, flags); - ret = clk->ops->set_rate(clk, rate, 0); - spin_unlock_irqrestore(&clock_lock, flags); - } - - if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) - propagate_rate(clk); - cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table) if (rate_khz == pos->frequency) break; if (rate_khz != pos->frequency) return -ENOTSUPP; - clk->rate = rate; - regval = readl(LOONGSON_CHIPCFG); regval = (regval & ~0x7) | (pos->driver_data - 1); writel(regval, LOONGSON_CHIPCFG); - return ret; -} -EXPORT_SYMBOL_GPL(clk_set_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (likely(clk->ops && clk->ops->round_rate)) { - unsigned long flags, rounded; - - spin_lock_irqsave(&clock_lock, flags); - rounded = clk->ops->round_rate(clk, rate); - spin_unlock_irqrestore(&clock_lock, flags); - - return rounded; - } - - return rate; + return 0; } -EXPORT_SYMBOL_GPL(clk_round_rate); +EXPORT_SYMBOL_GPL(loongson2_cpu_set_rate); diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform index 7f8e342f1ef5..3b9673e7a2fa 100644 --- a/arch/mips/loongson32/Platform +++ b/arch/mips/loongson32/Platform @@ -1,4 +1,3 @@ cflags-$(CONFIG_CPU_LOONGSON32) += -march=mips32r2 -Wa,--trap -platform-$(CONFIG_MACH_LOONGSON32) += loongson32/ cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32 load-$(CONFIG_CPU_LOONGSON32) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index 48b29c198acf..517f1f8e81fb 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -4,18 +4,12 @@ if MACH_LOONGSON64 config RS780_HPET bool "RS780/SBX00 HPET Timer" depends on MACH_LOONGSON64 + depends on BROKEN select MIPS_EXTERNAL_TIMER help This option enables the hpet timer of AMD RS780/SBX00. - If you want to enable the Loongson3 CPUFreq Driver, Please enable - this option at first, otherwise, You will get wrong system time. - - If unsure, say Yes. - - -config LOONGSON_MC146818 - bool - default n + Note: This driver is doing some dangerous hack. Please only enable + it on RS780E systems. endif # MACH_LOONGSON64 diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile index b7f40b179c71..39c06f52b08f 100644 --- a/arch/mips/loongson64/Makefile +++ b/arch/mips/loongson64/Makefile @@ -2,12 +2,12 @@ # # Makefile for Loongson-3 family machines # -obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o acpi_init.o dma.o \ +obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o dma.o \ setup.o init.o env.o time.o reset.o \ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_RS780_HPET) += hpet.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_LOONGSON_MC146818) += rtc.o obj-$(CONFIG_SUSPEND) += pm.o +obj-$(CONFIG_PCI_QUIRKS) += vbios_quirk.o +obj-$(CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION) += cpucfg-emul.o diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index d5eb94c9edb4..ec42c5085905 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -55,6 +55,5 @@ cflags-y += $(call cc-option,-mno-loongson-mmi) # Loongson Machines' Support # -platform-$(CONFIG_MACH_LOONGSON64) += loongson64/ cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely load-$(CONFIG_CPU_LOONGSON64) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/cop2-ex.c b/arch/mips/loongson64/cop2-ex.c index 9efdfe430ff0..f130f62129b8 100644 --- a/arch/mips/loongson64/cop2-ex.c +++ b/arch/mips/loongson64/cop2-ex.c @@ -14,17 +14,30 @@ #include <linux/sched.h> #include <linux/notifier.h> #include <linux/ptrace.h> +#include <linux/uaccess.h> +#include <linux/sched/signal.h> #include <asm/fpu.h> #include <asm/cop2.h> +#include <asm/inst.h> +#include <asm/branch.h> #include <asm/current.h> #include <asm/mipsregs.h> +#include <asm/unaligned-emul.h> static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action, void *data) { - int fpu_owned; + unsigned int res, fpu_owned; + unsigned long ra, value, value_next; + union mips_instruction insn; int fr = !test_thread_flag(TIF_32BIT_FPREGS); + struct pt_regs *regs = (struct pt_regs *)data; + void __user *addr = (void __user *)regs->cp0_badvaddr; + unsigned int __user *pc = (unsigned int __user *)exception_epc(regs); + + ra = regs->regs[31]; + __get_user(insn.word, pc); switch (action) { case CU2_EXCEPTION: @@ -49,9 +62,284 @@ static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action, preempt_enable(); return NOTIFY_STOP; /* Don't call default notifier */ + + case CU2_LWC2_OP: + if (insn.loongson3_lswc2_format.ls == 0) + goto sigbus; + + if (insn.loongson3_lswc2_format.fr == 0) { /* gslq */ + if (!access_ok(addr, 16)) + goto sigbus; + + LoadDW(addr, value, res); + if (res) + goto fault; + + LoadDW(addr + 8, value_next, res); + if (res) + goto fault; + + regs->regs[insn.loongson3_lswc2_format.rt] = value; + regs->regs[insn.loongson3_lswc2_format.rq] = value_next; + compute_return_epc(regs); + } else { /* gslqc1 */ + if (!access_ok(addr, 16)) + goto sigbus; + + lose_fpu(1); + LoadDW(addr, value, res); + if (res) + goto fault; + + LoadDW(addr + 8, value_next, res); + if (res) + goto fault; + + set_fpr64(current->thread.fpu.fpr, + insn.loongson3_lswc2_format.rt, value); + set_fpr64(current->thread.fpu.fpr, + insn.loongson3_lswc2_format.rq, value_next); + compute_return_epc(regs); + own_fpu(1); + } + return NOTIFY_STOP; /* Don't call default notifier */ + + case CU2_SWC2_OP: + if (insn.loongson3_lswc2_format.ls == 0) + goto sigbus; + + if (insn.loongson3_lswc2_format.fr == 0) { /* gssq */ + if (!access_ok(addr, 16)) + goto sigbus; + + /* write upper 8 bytes first */ + value_next = regs->regs[insn.loongson3_lswc2_format.rq]; + + StoreDW(addr + 8, value_next, res); + if (res) + goto fault; + value = regs->regs[insn.loongson3_lswc2_format.rt]; + + StoreDW(addr, value, res); + if (res) + goto fault; + + compute_return_epc(regs); + } else { /* gssqc1 */ + if (!access_ok(addr, 16)) + goto sigbus; + + lose_fpu(1); + value_next = get_fpr64(current->thread.fpu.fpr, + insn.loongson3_lswc2_format.rq); + + StoreDW(addr + 8, value_next, res); + if (res) + goto fault; + + value = get_fpr64(current->thread.fpu.fpr, + insn.loongson3_lswc2_format.rt); + + StoreDW(addr, value, res); + if (res) + goto fault; + + compute_return_epc(regs); + own_fpu(1); + } + return NOTIFY_STOP; /* Don't call default notifier */ + + case CU2_LDC2_OP: + switch (insn.loongson3_lsdc2_format.opcode1) { + /* + * Loongson-3 overridden ldc2 instructions. + * opcode1 instruction + * 0x1 gslhx: load 2 bytes to GPR + * 0x2 gslwx: load 4 bytes to GPR + * 0x3 gsldx: load 8 bytes to GPR + * 0x6 gslwxc1: load 4 bytes to FPR + * 0x7 gsldxc1: load 8 bytes to FPR + */ + case 0x1: + if (!access_ok(addr, 2)) + goto sigbus; + + LoadHW(addr, value, res); + if (res) + goto fault; + + compute_return_epc(regs); + regs->regs[insn.loongson3_lsdc2_format.rt] = value; + break; + case 0x2: + if (!access_ok(addr, 4)) + goto sigbus; + + LoadW(addr, value, res); + if (res) + goto fault; + + compute_return_epc(regs); + regs->regs[insn.loongson3_lsdc2_format.rt] = value; + break; + case 0x3: + if (!access_ok(addr, 8)) + goto sigbus; + + LoadDW(addr, value, res); + if (res) + goto fault; + + compute_return_epc(regs); + regs->regs[insn.loongson3_lsdc2_format.rt] = value; + break; + case 0x6: + die_if_kernel("Unaligned FP access in kernel code", regs); + BUG_ON(!used_math()); + if (!access_ok(addr, 4)) + goto sigbus; + + lose_fpu(1); + LoadW(addr, value, res); + if (res) + goto fault; + + set_fpr64(current->thread.fpu.fpr, + insn.loongson3_lsdc2_format.rt, value); + compute_return_epc(regs); + own_fpu(1); + + break; + case 0x7: + die_if_kernel("Unaligned FP access in kernel code", regs); + BUG_ON(!used_math()); + if (!access_ok(addr, 8)) + goto sigbus; + + lose_fpu(1); + LoadDW(addr, value, res); + if (res) + goto fault; + + set_fpr64(current->thread.fpu.fpr, + insn.loongson3_lsdc2_format.rt, value); + compute_return_epc(regs); + own_fpu(1); + break; + + } + return NOTIFY_STOP; /* Don't call default notifier */ + + case CU2_SDC2_OP: + switch (insn.loongson3_lsdc2_format.opcode1) { + /* + * Loongson-3 overridden sdc2 instructions. + * opcode1 instruction + * 0x1 gsshx: store 2 bytes from GPR + * 0x2 gsswx: store 4 bytes from GPR + * 0x3 gssdx: store 8 bytes from GPR + * 0x6 gsswxc1: store 4 bytes from FPR + * 0x7 gssdxc1: store 8 bytes from FPR + */ + case 0x1: + if (!access_ok(addr, 2)) + goto sigbus; + + compute_return_epc(regs); + value = regs->regs[insn.loongson3_lsdc2_format.rt]; + + StoreHW(addr, value, res); + if (res) + goto fault; + + break; + case 0x2: + if (!access_ok(addr, 4)) + goto sigbus; + + compute_return_epc(regs); + value = regs->regs[insn.loongson3_lsdc2_format.rt]; + + StoreW(addr, value, res); + if (res) + goto fault; + + break; + case 0x3: + if (!access_ok(addr, 8)) + goto sigbus; + + compute_return_epc(regs); + value = regs->regs[insn.loongson3_lsdc2_format.rt]; + + StoreDW(addr, value, res); + if (res) + goto fault; + + break; + + case 0x6: + die_if_kernel("Unaligned FP access in kernel code", regs); + BUG_ON(!used_math()); + + if (!access_ok(addr, 4)) + goto sigbus; + + lose_fpu(1); + value = get_fpr64(current->thread.fpu.fpr, + insn.loongson3_lsdc2_format.rt); + + StoreW(addr, value, res); + if (res) + goto fault; + + compute_return_epc(regs); + own_fpu(1); + + break; + case 0x7: + die_if_kernel("Unaligned FP access in kernel code", regs); + BUG_ON(!used_math()); + + if (!access_ok(addr, 8)) + goto sigbus; + + lose_fpu(1); + value = get_fpr64(current->thread.fpu.fpr, + insn.loongson3_lsdc2_format.rt); + + StoreDW(addr, value, res); + if (res) + goto fault; + + compute_return_epc(regs); + own_fpu(1); + + break; + } + return NOTIFY_STOP; /* Don't call default notifier */ } return NOTIFY_OK; /* Let default notifier send signals */ + +fault: + /* roll back jump/branch */ + regs->regs[31] = ra; + regs->cp0_epc = (unsigned long)pc; + /* Did we have an exception handler installed? */ + if (fixup_exception(regs)) + return NOTIFY_STOP; /* Don't call default notifier */ + + die_if_kernel("Unhandled kernel unaligned access", regs); + force_sig(SIGSEGV); + + return NOTIFY_STOP; /* Don't call default notifier */ + +sigbus: + die_if_kernel("Unhandled kernel unaligned access", regs); + force_sig(SIGBUS); + + return NOTIFY_STOP; /* Don't call default notifier */ } static int __init loongson_cu2_setup(void) diff --git a/arch/mips/loongson64/cpucfg-emul.c b/arch/mips/loongson64/cpucfg-emul.c new file mode 100644 index 000000000000..cd619b47ba1f --- /dev/null +++ b/arch/mips/loongson64/cpucfg-emul.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/smp.h> +#include <linux/types.h> +#include <asm/cpu.h> +#include <asm/cpu-info.h> +#include <asm/elf.h> + +#include <loongson_regs.h> +#include <cpucfg-emul.h> + +static bool is_loongson(struct cpuinfo_mips *c) +{ + switch (c->processor_id & PRID_COMP_MASK) { + case PRID_COMP_LEGACY: + return ((c->processor_id & PRID_IMP_MASK) == + PRID_IMP_LOONGSON_64C); + + case PRID_COMP_LOONGSON: + return true; + + default: + return false; + } +} + +static u32 get_loongson_fprev(struct cpuinfo_mips *c) +{ + return c->fpu_id & LOONGSON_FPREV_MASK; +} + +static bool cpu_has_uca(void) +{ + u32 diag = read_c0_diag(); + u32 new_diag; + + if (diag & LOONGSON_DIAG_UCAC) + /* UCA is already enabled. */ + return true; + + /* See if UCAC bit can be flipped on. This should be safe. */ + new_diag = diag | LOONGSON_DIAG_UCAC; + write_c0_diag(new_diag); + new_diag = read_c0_diag(); + write_c0_diag(diag); + + return (new_diag & LOONGSON_DIAG_UCAC) != 0; +} + +static void probe_uca(struct cpuinfo_mips *c) +{ + if (cpu_has_uca()) + c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_LSUCA; +} + +static void decode_loongson_config6(struct cpuinfo_mips *c) +{ + u32 config6 = read_c0_config6(); + + if (config6 & MIPS_CONF6_LOONGSON_SFBEN) + c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_SFBP; + if (config6 & MIPS_CONF6_LOONGSON_LLEXC) + c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_LLEXC; + if (config6 & MIPS_CONF6_LOONGSON_SCRAND) + c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_SCRAND; +} + +static void patch_cpucfg_sel1(struct cpuinfo_mips *c) +{ + u64 ases = c->ases; + u64 options = c->options; + u32 data = c->loongson3_cpucfg_data[0]; + + if (options & MIPS_CPU_FPU) { + data |= LOONGSON_CFG1_FP; + data |= get_loongson_fprev(c) << LOONGSON_CFG1_FPREV_OFFSET; + } + if (ases & MIPS_ASE_LOONGSON_MMI) + data |= LOONGSON_CFG1_MMI; + if (ases & MIPS_ASE_MSA) + data |= LOONGSON_CFG1_MSA1; + + c->loongson3_cpucfg_data[0] = data; +} + +static void patch_cpucfg_sel2(struct cpuinfo_mips *c) +{ + u64 ases = c->ases; + u64 options = c->options; + u32 data = c->loongson3_cpucfg_data[1]; + + if (ases & MIPS_ASE_LOONGSON_EXT) + data |= LOONGSON_CFG2_LEXT1; + if (ases & MIPS_ASE_LOONGSON_EXT2) + data |= LOONGSON_CFG2_LEXT2; + if (options & MIPS_CPU_LDPTE) + data |= LOONGSON_CFG2_LSPW; + + if (ases & MIPS_ASE_VZ) + data |= LOONGSON_CFG2_LVZP; + else + data &= ~LOONGSON_CFG2_LVZREV; + + c->loongson3_cpucfg_data[1] = data; +} + +static void patch_cpucfg_sel3(struct cpuinfo_mips *c) +{ + u64 ases = c->ases; + u32 data = c->loongson3_cpucfg_data[2]; + + if (ases & MIPS_ASE_LOONGSON_CAM) { + data |= LOONGSON_CFG3_LCAMP; + } else { + data &= ~LOONGSON_CFG3_LCAMREV; + data &= ~LOONGSON_CFG3_LCAMNUM; + data &= ~LOONGSON_CFG3_LCAMKW; + data &= ~LOONGSON_CFG3_LCAMVW; + } + + c->loongson3_cpucfg_data[2] = data; +} + +void loongson3_cpucfg_synthesize_data(struct cpuinfo_mips *c) +{ + /* Only engage the logic on Loongson processors. */ + if (!is_loongson(c)) + return; + + /* CPUs with CPUCFG support don't need to synthesize anything. */ + if (cpu_has_cfg()) + goto have_cpucfg_now; + + c->loongson3_cpucfg_data[0] = 0; + c->loongson3_cpucfg_data[1] = 0; + c->loongson3_cpucfg_data[2] = 0; + + /* Add CPUCFG features non-discoverable otherwise. */ + switch (c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) { + case PRID_IMP_LOONGSON_64R | PRID_REV_LOONGSON2K_R1_0: + case PRID_IMP_LOONGSON_64R | PRID_REV_LOONGSON2K_R1_1: + case PRID_IMP_LOONGSON_64R | PRID_REV_LOONGSON2K_R1_2: + case PRID_IMP_LOONGSON_64R | PRID_REV_LOONGSON2K_R1_3: + decode_loongson_config6(c); + probe_uca(c); + + c->loongson3_cpucfg_data[0] |= (LOONGSON_CFG1_LSLDR0 | + LOONGSON_CFG1_LSSYNCI | LOONGSON_CFG1_LLSYNC | + LOONGSON_CFG1_TGTSYNC); + c->loongson3_cpucfg_data[1] |= (LOONGSON_CFG2_LBT1 | + LOONGSON_CFG2_LBT2 | LOONGSON_CFG2_LPMP | + LOONGSON_CFG2_LPM_REV2); + c->loongson3_cpucfg_data[2] = 0; + break; + + case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R1: + c->loongson3_cpucfg_data[0] |= (LOONGSON_CFG1_LSLDR0 | + LOONGSON_CFG1_LSSYNCI | LOONGSON_CFG1_LSUCA | + LOONGSON_CFG1_LLSYNC | LOONGSON_CFG1_TGTSYNC); + c->loongson3_cpucfg_data[1] |= (LOONGSON_CFG2_LBT1 | + LOONGSON_CFG2_LPMP | LOONGSON_CFG2_LPM_REV1); + c->loongson3_cpucfg_data[2] |= ( + LOONGSON_CFG3_LCAM_REV1 | + LOONGSON_CFG3_LCAMNUM_REV1 | + LOONGSON_CFG3_LCAMKW_REV1 | + LOONGSON_CFG3_LCAMVW_REV1); + break; + + case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3B_R1: + case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3B_R2: + c->loongson3_cpucfg_data[0] |= (LOONGSON_CFG1_LSLDR0 | + LOONGSON_CFG1_LSSYNCI | LOONGSON_CFG1_LSUCA | + LOONGSON_CFG1_LLSYNC | LOONGSON_CFG1_TGTSYNC); + c->loongson3_cpucfg_data[1] |= (LOONGSON_CFG2_LBT1 | + LOONGSON_CFG2_LPMP | LOONGSON_CFG2_LPM_REV1); + c->loongson3_cpucfg_data[2] |= ( + LOONGSON_CFG3_LCAM_REV1 | + LOONGSON_CFG3_LCAMNUM_REV1 | + LOONGSON_CFG3_LCAMKW_REV1 | + LOONGSON_CFG3_LCAMVW_REV1); + break; + + case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0: + case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_1: + case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R3_0: + case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R3_1: + decode_loongson_config6(c); + probe_uca(c); + + c->loongson3_cpucfg_data[0] |= (LOONGSON_CFG1_CNT64 | + LOONGSON_CFG1_LSLDR0 | LOONGSON_CFG1_LSPREF | + LOONGSON_CFG1_LSPREFX | LOONGSON_CFG1_LSSYNCI | + LOONGSON_CFG1_LLSYNC | LOONGSON_CFG1_TGTSYNC); + c->loongson3_cpucfg_data[1] |= (LOONGSON_CFG2_LBT1 | + LOONGSON_CFG2_LBT2 | LOONGSON_CFG2_LBTMMU | + LOONGSON_CFG2_LPMP | LOONGSON_CFG2_LPM_REV1 | + LOONGSON_CFG2_LVZ_REV1); + c->loongson3_cpucfg_data[2] |= (LOONGSON_CFG3_LCAM_REV1 | + LOONGSON_CFG3_LCAMNUM_REV1 | + LOONGSON_CFG3_LCAMKW_REV1 | + LOONGSON_CFG3_LCAMVW_REV1); + break; + + default: + /* It is possible that some future Loongson cores still do + * not have CPUCFG, so do not emulate anything for these + * cores. + */ + return; + } + + /* This feature is set by firmware, but all known Loongson-64 systems + * are configured this way. + */ + c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_CDMAP; + + /* Patch in dynamically probed bits. */ + patch_cpucfg_sel1(c); + patch_cpucfg_sel2(c); + patch_cpucfg_sel3(c); + +have_cpucfg_now: + /* We have usable CPUCFG now, emulated or not. + * Announce CPUCFG availability to userspace via hwcap. + */ + elf_hwcap |= HWCAP_LOONGSON_CPUCFG; +} diff --git a/arch/mips/loongson64/dma.c b/arch/mips/loongson64/dma.c index 5e86635f71db..dbfe6e82fddd 100644 --- a/arch/mips/loongson64/dma.c +++ b/arch/mips/loongson64/dma.c @@ -2,21 +2,24 @@ #include <linux/dma-direct.h> #include <linux/init.h> #include <linux/swiotlb.h> +#include <boot_param.h> dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) { /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from * Loongson-3's 48bit address space and embed it into 40bit */ long nid = (paddr >> 44) & 0x3; - return ((nid << 44) ^ paddr) | (nid << 37); + + return ((nid << 44) ^ paddr) | (nid << node_id_offset); } phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr) { /* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from * Loongson-3's 48bit address space and embed it into 40bit */ - long nid = (daddr >> 37) & 0x3; - return ((nid << 37) ^ daddr) | (nid << 44); + long nid = (daddr >> node_id_offset) & 0x3; + + return ((nid << node_id_offset) ^ daddr) | (nid << 44); } void __init plat_swiotlb_setup(void) diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c index 2554ef11170d..d11bc346bbca 100644 --- a/arch/mips/loongson64/env.c +++ b/arch/mips/loongson64/env.c @@ -14,12 +14,15 @@ * Author: Wu Zhangjin, wuzhangjin@gmail.com */ #include <linux/export.h> +#include <linux/pci_ids.h> #include <asm/bootinfo.h> #include <loongson.h> #include <boot_param.h> #include <builtin_dtbs.h> #include <workarounds.h> +#define HOST_BRIDGE_CONFIG_ADDR ((void __iomem *)TO_UNCAC(0x1a000000)) + u32 cpu_clock_freq; EXPORT_SYMBOL(cpu_clock_freq); struct efi_memory_map_loongson *loongson_memmap; @@ -43,6 +46,8 @@ void __init prom_init_env(void) struct system_loongson *esys; struct efi_cpuinfo_loongson *ecpu; struct irq_source_routing_table *eirq_source; + u32 id; + u16 vendor, device; /* firmware arguments are initialized in head.S */ boot_p = (struct boot_params *)fw_arg2; @@ -178,4 +183,19 @@ void __init prom_init_env(void) memcpy(loongson_sysconf.sensors, esys->sensors, sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); pr_info("CpuClock = %u\n", cpu_clock_freq); + + /* Read the ID of PCI host bridge to detect bridge type */ + id = readl(HOST_BRIDGE_CONFIG_ADDR); + vendor = id & 0xffff; + device = (id >> 16) & 0xffff; + + if (vendor == PCI_VENDOR_ID_LOONGSON && device == 0x7a00) { + pr_info("The bridge chip is LS7A\n"); + loongson_sysconf.bridgetype = LS7A; + loongson_sysconf.early_config = ls7a_early_config; + } else { + pr_info("The bridge chip is RS780E or SR5690\n"); + loongson_sysconf.bridgetype = RS780E; + loongson_sysconf.early_config = rs780e_early_config; + } } diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c index da38944471f4..59ddadace83f 100644 --- a/arch/mips/loongson64/init.c +++ b/arch/mips/loongson64/init.c @@ -5,6 +5,7 @@ */ #include <linux/irqchip.h> +#include <linux/logic_pio.h> #include <linux/memblock.h> #include <asm/bootinfo.h> #include <asm/traps.h> @@ -13,25 +14,41 @@ #include <asm/fw/fw.h> #include <loongson.h> +#include <boot_param.h> + +#define NODE_ID_OFFSET_ADDR ((void __iomem *)TO_UNCAC(0x1001041c)) + +u32 node_id_offset; static void __init mips_nmi_setup(void) { void *base; - extern char except_vec_nmi; + extern char except_vec_nmi[]; base = (void *)(CAC_BASE + 0x380); - memcpy(base, &except_vec_nmi, 0x80); + memcpy(base, except_vec_nmi, 0x80); flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); } +void ls7a_early_config(void) +{ + node_id_offset = ((readl(NODE_ID_OFFSET_ADDR) >> 8) & 0x1f) + 36; +} + +void rs780e_early_config(void) +{ + node_id_offset = 37; +} + void __init prom_init(void) { fw_init_cmdline(); prom_init_env(); /* init base address of io space */ - set_io_port_base((unsigned long) - ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); + set_io_port_base(PCI_IOBASE); + + loongson_sysconf.early_config(); prom_init_numa_memory(); @@ -46,7 +63,45 @@ void __init prom_free_prom_memory(void) { } +static __init void reserve_pio_range(void) +{ + struct logic_pio_hwaddr *range; + + range = kzalloc(sizeof(*range), GFP_ATOMIC); + if (!range) + return; + + range->fwnode = &of_root->fwnode; + range->size = MMIO_LOWER_RESERVED; + range->hw_start = LOONGSON_PCIIO_BASE; + range->flags = LOGIC_PIO_CPU_MMIO; + + if (logic_pio_register_range(range)) { + pr_err("Failed to reserve PIO range for legacy ISA\n"); + goto free_range; + } + + if (WARN(range->io_start != 0, + "Reserved PIO range does not start from 0\n")) + goto unregister; + + /* + * i8259 would access I/O space, so mapping must be done here. + * Please remove it when all drivers can be managed by logic_pio. + */ + ioremap_page_range(PCI_IOBASE, PCI_IOBASE + MMIO_LOWER_RESERVED, + LOONGSON_PCIIO_BASE, + pgprot_device(PAGE_KERNEL)); + + return; +unregister: + logic_pio_unregister_range(range); +free_range: + kfree(range); +} + void __init arch_init_irq(void) { + reserve_pio_range(); irqchip_init(); } diff --git a/arch/mips/loongson64/pci.c b/arch/mips/loongson64/pci.c deleted file mode 100644 index e84ae20c3290..000000000000 --- a/arch/mips/loongson64/pci.c +++ /dev/null @@ -1,51 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - */ -#include <linux/pci.h> - -#include <pci.h> -#include <loongson.h> -#include <boot_param.h> - -static struct resource loongson_pci_mem_resource = { - .name = "pci memory space", - .start = LOONGSON_PCI_MEM_START, - .end = LOONGSON_PCI_MEM_END, - .flags = IORESOURCE_MEM, -}; - -static struct resource loongson_pci_io_resource = { - .name = "pci io space", - .start = LOONGSON_PCI_IO_START, - .end = IO_SPACE_LIMIT, - .flags = IORESOURCE_IO, -}; - -static struct pci_controller loongson_pci_controller = { - .pci_ops = &loongson_pci_ops, - .io_resource = &loongson_pci_io_resource, - .mem_resource = &loongson_pci_mem_resource, - .mem_offset = 0x00000000UL, - .io_offset = 0x00000000UL, -}; - - -extern int sbx00_acpi_init(void); - -static int __init pcibios_init(void) -{ - - loongson_pci_controller.io_map_base = mips_io_port_base; - loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; - loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; - - register_pci_controller(&loongson_pci_controller); - - sbx00_acpi_init(); - - return 0; -} - -arch_initcall(pcibios_init); diff --git a/arch/mips/loongson64/rtc.c b/arch/mips/loongson64/rtc.c deleted file mode 100644 index 8d7628c0f513..000000000000 --- a/arch/mips/loongson64/rtc.c +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Lemote Fuloong platform support - * - * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mc146818rtc.h> - -static struct resource loongson_rtc_resources[] = { - { - .start = RTC_PORT(0), - .end = RTC_PORT(1), - .flags = IORESOURCE_IO, - }, { - .start = RTC_IRQ, - .end = RTC_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device loongson_rtc_device = { - .name = "rtc_cmos", - .id = -1, - .resource = loongson_rtc_resources, - .num_resources = ARRAY_SIZE(loongson_rtc_resources), -}; - - -static int __init loongson_rtc_platform_init(void) -{ - platform_device_register(&loongson_rtc_device); - return 0; -} - -device_initcall(loongson_rtc_platform_init); diff --git a/arch/mips/loongson64/smp.c b/arch/mips/loongson64/smp.c index e1fe8bbb377d..e744e1bee49e 100644 --- a/arch/mips/loongson64/smp.c +++ b/arch/mips/loongson64/smp.c @@ -15,7 +15,6 @@ #include <linux/kexec.h> #include <asm/processor.h> #include <asm/time.h> -#include <asm/clock.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> #include <loongson.h> diff --git a/arch/mips/loongson64/time.c b/arch/mips/loongson64/time.c index 1245f22cec84..91e842b58365 100644 --- a/arch/mips/loongson64/time.c +++ b/arch/mips/loongson64/time.c @@ -6,7 +6,7 @@ * Copyright (C) 2009 Lemote Inc. * Author: Wu Zhangjin, wuzhangjin@gmail.com */ -#include <asm/mc146818-time.h> + #include <asm/time.h> #include <asm/hpet.h> @@ -21,9 +21,3 @@ void __init plat_time_init(void) setup_hpet_timer(); #endif } - -void read_persistent_clock64(struct timespec64 *ts) -{ - ts->tv_sec = mc146818_get_cmos_time(); - ts->tv_nsec = 0; -} diff --git a/arch/mips/loongson64/vbios_quirk.c b/arch/mips/loongson64/vbios_quirk.c new file mode 100644 index 000000000000..9a29e94d3db1 --- /dev/null +++ b/arch/mips/loongson64/vbios_quirk.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <linux/pci.h> +#include <loongson.h> + +static void pci_fixup_radeon(struct pci_dev *pdev) +{ + struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; + + if (res->start) + return; + + if (!loongson_sysconf.vgabios_addr) + return; + + pci_disable_rom(pdev); + if (res->parent) + release_resource(res); + + res->start = virt_to_phys((void *) loongson_sysconf.vgabios_addr); + res->end = res->start + 256*1024 - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW | + IORESOURCE_PCI_FIXED; + + dev_info(&pdev->dev, "BAR %d: assigned %pR for Radeon ROM\n", + PCI_ROM_RESOURCE, res); +} +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, 0x9615, + PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_radeon); diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 9701c89e7e14..587cf1d115e8 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -439,7 +439,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, regs->cp0_epc + dec_insn.pc_inc + dec_insn.next_pc_inc; } - /* fall through */ + fallthrough; case jr_op: /* For R6, JR already emulated in jalr_op */ if (NO_R6EMU && insn.r_format.func == jr_op) @@ -459,11 +459,11 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, regs->regs[31] = regs->cp0_epc + dec_insn.pc_inc + dec_insn.next_pc_inc; - /* fall through */ + fallthrough; case bltzl_op: if (NO_R6EMU) break; - /* fall through */ + fallthrough; case bltz_op: if ((long)regs->regs[insn.i_format.rs] < 0) *contpc = regs->cp0_epc + @@ -483,11 +483,11 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, regs->regs[31] = regs->cp0_epc + dec_insn.pc_inc + dec_insn.next_pc_inc; - /* fall through */ + fallthrough; case bgezl_op: if (NO_R6EMU) break; - /* fall through */ + fallthrough; case bgez_op: if ((long)regs->regs[insn.i_format.rs] >= 0) *contpc = regs->cp0_epc + @@ -502,12 +502,12 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, break; case jalx_op: set_isa16_mode(bit); - /* fall through */ + fallthrough; case jal_op: regs->regs[31] = regs->cp0_epc + dec_insn.pc_inc + dec_insn.next_pc_inc; - /* fall through */ + fallthrough; case j_op: *contpc = regs->cp0_epc + dec_insn.pc_inc; *contpc >>= 28; @@ -519,7 +519,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, case beql_op: if (NO_R6EMU) break; - /* fall through */ + fallthrough; case beq_op: if (regs->regs[insn.i_format.rs] == regs->regs[insn.i_format.rt]) @@ -534,7 +534,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, case bnel_op: if (NO_R6EMU) break; - /* fall through */ + fallthrough; case bne_op: if (regs->regs[insn.i_format.rs] != regs->regs[insn.i_format.rt]) @@ -549,7 +549,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, case blezl_op: if (!insn.i_format.rt && NO_R6EMU) break; - /* fall through */ + fallthrough; case blez_op: /* @@ -587,7 +587,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, case bgtzl_op: if (!insn.i_format.rt && NO_R6EMU) break; - /* fall through */ + fallthrough; case bgtz_op: /* * Compact branches for R6 for the @@ -725,7 +725,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, return 1; } /* R2/R6 compatible cop1 instruction */ - /* fall through */ + fallthrough; case cop2_op: case cop1x_op: if (insn.i_format.rs == bc_op) { @@ -1217,14 +1217,14 @@ emul: case bcfl_op: if (cpu_has_mips_2_3_4_5_r) likely = 1; - /* fall through */ + fallthrough; case bcf_op: cond = !cond; break; case bctl_op: if (cpu_has_mips_2_3_4_5_r) likely = 1; - /* fall through */ + fallthrough; case bct_op: break; } diff --git a/arch/mips/math-emu/dp_add.c b/arch/mips/math-emu/dp_add.c index a8f98b8157f5..78504736be9e 100644 --- a/arch/mips/math-emu/dp_add.c +++ b/arch/mips/math-emu/dp_add.c @@ -92,8 +92,7 @@ union ieee754dp ieee754dp_add(union ieee754dp x, union ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): DPDNORMY; break; diff --git a/arch/mips/math-emu/dp_div.c b/arch/mips/math-emu/dp_div.c index 2b682e930e39..ac1ecc46248d 100644 --- a/arch/mips/math-emu/dp_div.c +++ b/arch/mips/math-emu/dp_div.c @@ -91,8 +91,7 @@ union ieee754dp ieee754dp_div(union ieee754dp x, union ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): DPDNORMY; break; diff --git a/arch/mips/math-emu/dp_fmax.c b/arch/mips/math-emu/dp_fmax.c index 3eda9ff7b491..126ec90bb4c7 100644 --- a/arch/mips/math-emu/dp_fmax.c +++ b/arch/mips/math-emu/dp_fmax.c @@ -93,8 +93,7 @@ union ieee754dp ieee754dp_fmax(union ieee754dp x, union ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): DPDNORMY; break; @@ -222,8 +221,7 @@ union ieee754dp ieee754dp_fmaxa(union ieee754dp x, union ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): DPDNORMY; break; diff --git a/arch/mips/math-emu/dp_fmin.c b/arch/mips/math-emu/dp_fmin.c index b3594a1704a7..35ded4c45989 100644 --- a/arch/mips/math-emu/dp_fmin.c +++ b/arch/mips/math-emu/dp_fmin.c @@ -93,8 +93,7 @@ union ieee754dp ieee754dp_fmin(union ieee754dp x, union ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): DPDNORMY; break; @@ -222,8 +221,7 @@ union ieee754dp ieee754dp_fmina(union ieee754dp x, union ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): DPDNORMY; break; diff --git a/arch/mips/math-emu/dp_maddf.c b/arch/mips/math-emu/dp_maddf.c index e24ef374d828..931e66f683ca 100644 --- a/arch/mips/math-emu/dp_maddf.c +++ b/arch/mips/math-emu/dp_maddf.c @@ -150,8 +150,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x, case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): if (zc == IEEE754_CLASS_INF) return ieee754dp_inf(zs); diff --git a/arch/mips/math-emu/dp_mul.c b/arch/mips/math-emu/dp_mul.c index e8a97d26472a..8a671bb7af12 100644 --- a/arch/mips/math-emu/dp_mul.c +++ b/arch/mips/math-emu/dp_mul.c @@ -89,8 +89,7 @@ union ieee754dp ieee754dp_mul(union ieee754dp x, union ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): DPDNORMY; break; diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c index 06be390ba79a..1ee38f8242fd 100644 --- a/arch/mips/math-emu/dp_sqrt.c +++ b/arch/mips/math-emu/dp_sqrt.c @@ -52,8 +52,7 @@ union ieee754dp ieee754dp_sqrt(union ieee754dp x) case IEEE754_CLASS_DNORM: DPDNORMX; - /* fall through */ - + fallthrough; case IEEE754_CLASS_NORM: if (xs) { /* sqrt(-x) = Nan */ @@ -130,7 +129,7 @@ union ieee754dp ieee754dp_sqrt(union ieee754dp x) switch (oldcsr.rm) { case FPU_CSR_RU: y.bits += 1; - /* fall through */ + fallthrough; case FPU_CSR_RN: t.bits += 1; break; diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c index f08aecefceff..08474ad2a64e 100644 --- a/arch/mips/math-emu/dp_sub.c +++ b/arch/mips/math-emu/dp_sub.c @@ -94,8 +94,7 @@ union ieee754dp ieee754dp_sub(union ieee754dp x, union ieee754dp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): DPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): /* normalize ym,ye */ DPDNORMY; diff --git a/arch/mips/math-emu/sp_add.c b/arch/mips/math-emu/sp_add.c index 9af3ec7302fb..715cd0534301 100644 --- a/arch/mips/math-emu/sp_add.c +++ b/arch/mips/math-emu/sp_add.c @@ -92,8 +92,7 @@ union ieee754sp ieee754sp_add(union ieee754sp x, union ieee754sp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): SPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): SPDNORMY; break; diff --git a/arch/mips/math-emu/sp_div.c b/arch/mips/math-emu/sp_div.c index fcc285f3b48d..2bfa266fdc76 100644 --- a/arch/mips/math-emu/sp_div.c +++ b/arch/mips/math-emu/sp_div.c @@ -91,8 +91,7 @@ union ieee754sp ieee754sp_div(union ieee754sp x, union ieee754sp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): SPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): SPDNORMY; break; diff --git a/arch/mips/math-emu/sp_fdp.c b/arch/mips/math-emu/sp_fdp.c index 9f1456109aa8..56417497c88e 100644 --- a/arch/mips/math-emu/sp_fdp.c +++ b/arch/mips/math-emu/sp_fdp.c @@ -34,8 +34,7 @@ union ieee754sp ieee754sp_fdp(union ieee754dp x) case IEEE754_CLASS_SNAN: x = ieee754dp_nanxcpt(x); EXPLODEXDP; - /* fall through */ - + fallthrough; case IEEE754_CLASS_QNAN: y = ieee754sp_nan_fdp(xs, xm); if (!ieee754_csr.nan2008) { diff --git a/arch/mips/math-emu/sp_fmax.c b/arch/mips/math-emu/sp_fmax.c index 4ce1d1f8b499..3fb16a1df3b8 100644 --- a/arch/mips/math-emu/sp_fmax.c +++ b/arch/mips/math-emu/sp_fmax.c @@ -93,8 +93,7 @@ union ieee754sp ieee754sp_fmax(union ieee754sp x, union ieee754sp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): SPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): SPDNORMY; break; @@ -222,8 +221,7 @@ union ieee754sp ieee754sp_fmaxa(union ieee754sp x, union ieee754sp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): SPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): SPDNORMY; break; diff --git a/arch/mips/math-emu/sp_fmin.c b/arch/mips/math-emu/sp_fmin.c index 7ad867fd7de2..ad2599d4a892 100644 --- a/arch/mips/math-emu/sp_fmin.c +++ b/arch/mips/math-emu/sp_fmin.c @@ -93,8 +93,7 @@ union ieee754sp ieee754sp_fmin(union ieee754sp x, union ieee754sp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): SPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): SPDNORMY; break; @@ -222,8 +221,7 @@ union ieee754sp ieee754sp_fmina(union ieee754sp x, union ieee754sp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): SPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): SPDNORMY; break; diff --git a/arch/mips/math-emu/sp_maddf.c b/arch/mips/math-emu/sp_maddf.c index 1b85b1a527ac..473ee222d90c 100644 --- a/arch/mips/math-emu/sp_maddf.c +++ b/arch/mips/math-emu/sp_maddf.c @@ -119,8 +119,7 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x, case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): SPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): if (zc == IEEE754_CLASS_INF) return ieee754sp_inf(zs); diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c index ded17e28e8bc..26cfd63025e9 100644 --- a/arch/mips/math-emu/sp_mul.c +++ b/arch/mips/math-emu/sp_mul.c @@ -89,8 +89,7 @@ union ieee754sp ieee754sp_mul(union ieee754sp x, union ieee754sp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): SPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): SPDNORMY; break; diff --git a/arch/mips/math-emu/sp_sub.c b/arch/mips/math-emu/sp_sub.c index f3d26a1f162c..16c8e9ae63ed 100644 --- a/arch/mips/math-emu/sp_sub.c +++ b/arch/mips/math-emu/sp_sub.c @@ -94,8 +94,7 @@ union ieee754sp ieee754sp_sub(union ieee754sp x, union ieee754sp y) case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM): SPDNORMX; - /* fall through */ - + fallthrough; case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM): SPDNORMY; break; diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 46f483e952c8..865926a37775 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -23,7 +23,7 @@ obj-y += uasm-mips.o endif obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o -obj-$(CONFIG_64BIT) += pgtable-64.o +obj-$(CONFIG_64BIT) += ioremap64.o pgtable-64.o obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_DMA_NONCOHERENT) += dma-noncoherent.o diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 36a311348739..6fb83ac7c475 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1049,7 +1049,7 @@ static inline void rm7k_erratum31(void) "cache\t%1, 0x3000(%0)\n\t" ".set pop\n" : - : "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill)); + : "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill_I)); } } @@ -1073,12 +1073,12 @@ static inline int alias_74k_erratum(struct cpuinfo_mips *c) if (rev <= PRID_REV_ENCODE_332(2, 4, 0)) present = 1; if (rev == PRID_REV_ENCODE_332(2, 4, 0)) - write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); + write_c0_config6(read_c0_config6() | MIPS_CONF6_MTI_SYND); break; case PRID_IMP_1074K: if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) { present = 1; - write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); + write_c0_config6(read_c0_config6() | MIPS_CONF6_MTI_SYND); } break; default: @@ -1200,7 +1200,7 @@ static void probe_pcache(void) case CPU_VR4133: write_c0_config(config & ~VR41_CONF_P4K); - /* fall through */ + fallthrough; case CPU_VR4131: /* Workaround for cache instruction bug of VR4131 */ if (c->processor_id == 0x0c80U || c->processor_id == 0x0c81U || @@ -1303,7 +1303,8 @@ static void probe_pcache(void) c->dcache.linesz; c->dcache.waybit = 0; if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >= - (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)) + (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) || + (c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) c->options |= MIPS_CPU_PREFETCH; break; @@ -1425,7 +1426,7 @@ static void probe_pcache(void) case CPU_74K: case CPU_1074K: has_74k_erratum = alias_74k_erratum(c); - /* Fall through. */ + fallthrough; case CPU_M14KC: case CPU_M14KEC: case CPU_24K: @@ -1449,7 +1450,7 @@ static void probe_pcache(void) c->dcache.flags |= MIPS_CACHE_PINDEX; break; } - /* fall through */ + fallthrough; default: if (has_74k_erratum || c->dcache.waysize > PAGE_SIZE) c->dcache.flags |= MIPS_CACHE_ALIASES; @@ -1629,8 +1630,13 @@ static void __init loongson3_sc_init(void) scache_size = c->scache.sets * c->scache.ways * c->scache.linesz; - /* Loongson-3 has 4 cores, 1MB scache for each. scaches are shared */ - scache_size *= 4; + + /* Loongson-3 has 4-Scache banks, while Loongson-2K have only 2 banks */ + if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) + scache_size *= 2; + else + scache_size *= 4; + c->scache.waybit = 0; c->scache.waysize = scache_size / c->scache.ways; pr_info("Unified secondary cache %ldkB %s, linesize %d bytes.\n", @@ -1703,9 +1709,10 @@ static void setup_scache(void) return; default: - if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 | - MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 | - MIPS_CPU_ISA_M64R2 | MIPS_CPU_ISA_M64R6)) { + if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | + MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | + MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) { #ifdef CONFIG_MIPS_CPU_SCACHE if (mips_sc_init ()) { scache_size = c->scache.ways * c->scache.sets * c->scache.linesz; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 33b409391ddb..ad6df1cea866 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -36,7 +36,6 @@ EXPORT_SYMBOL_GPL(flush_icache_range); void (*local_flush_icache_range)(unsigned long start, unsigned long end); EXPORT_SYMBOL_GPL(local_flush_icache_range); void (*__flush_icache_user_range)(unsigned long start, unsigned long end); -EXPORT_SYMBOL_GPL(__flush_icache_user_range); void (*__local_flush_icache_user_range)(unsigned long start, unsigned long end); EXPORT_SYMBOL_GPL(__local_flush_icache_user_range); diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c index fcea92d95d86..563c2c0d0c81 100644 --- a/arch/mips/mm/dma-noncoherent.c +++ b/arch/mips/mm/dma-noncoherent.c @@ -33,6 +33,7 @@ static inline bool cpu_needs_post_dma_flush(void) case CPU_R10000: case CPU_R12000: case CPU_BMIPS5000: + case CPU_LOONGSON2EF: return true; default: /* diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 79684000de0e..620ebfa45ec1 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -358,17 +358,23 @@ void maar_init(void) write_c0_maari(i); back_to_back_c0_hazard(); upper = read_c0_maar(); +#ifdef CONFIG_XPA + upper |= (phys_addr_t)readx_c0_maar() << MIPS_MAARX_ADDR_SHIFT; +#endif write_c0_maari(i + 1); back_to_back_c0_hazard(); lower = read_c0_maar(); +#ifdef CONFIG_XPA + lower |= (phys_addr_t)readx_c0_maar() << MIPS_MAARX_ADDR_SHIFT; +#endif attr = lower & upper; lower = (lower & MIPS_MAAR_ADDR) << 4; upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff; pr_info(" [%d]: ", i / 2); - if (!(attr & MIPS_MAAR_VL)) { + if ((attr & MIPS_MAAR_V) != MIPS_MAAR_V) { pr_cont("disabled\n"); continue; } diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c index 8317f337a86e..b6dad2fd5575 100644 --- a/arch/mips/mm/ioremap.c +++ b/arch/mips/mm/ioremap.c @@ -14,94 +14,13 @@ #include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/mm_types.h> +#include <linux/io.h> #include <asm/cacheflush.h> -#include <asm/io.h> #include <asm/tlbflush.h> +#include <ioremap.h> -static inline void remap_area_pte(pte_t * pte, unsigned long address, - phys_addr_t size, phys_addr_t phys_addr, unsigned long flags) -{ - phys_addr_t end; - unsigned long pfn; - pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE - | __WRITEABLE | flags); - - address &= ~PMD_MASK; - end = address + size; - if (end > PMD_SIZE) - end = PMD_SIZE; - BUG_ON(address >= end); - pfn = phys_addr >> PAGE_SHIFT; - do { - if (!pte_none(*pte)) { - printk("remap_area_pte: page already exists\n"); - BUG(); - } - set_pte(pte, pfn_pte(pfn, pgprot)); - address += PAGE_SIZE; - pfn++; - pte++; - } while (address && (address < end)); -} - -static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, - phys_addr_t size, phys_addr_t phys_addr, unsigned long flags) -{ - phys_addr_t end; - - address &= ~PGDIR_MASK; - end = address + size; - if (end > PGDIR_SIZE) - end = PGDIR_SIZE; - phys_addr -= address; - BUG_ON(address >= end); - do { - pte_t * pte = pte_alloc_kernel(pmd, address); - if (!pte) - return -ENOMEM; - remap_area_pte(pte, address, end - address, address + phys_addr, flags); - address = (address + PMD_SIZE) & PMD_MASK; - pmd++; - } while (address && (address < end)); - return 0; -} - -static int remap_area_pages(unsigned long address, phys_addr_t phys_addr, - phys_addr_t size, unsigned long flags) -{ - int error; - pgd_t * dir; - unsigned long end = address + size; - - phys_addr -= address; - dir = pgd_offset(&init_mm, address); - flush_cache_all(); - BUG_ON(address >= end); - do { - p4d_t *p4d; - pud_t *pud; - pmd_t *pmd; - - error = -ENOMEM; - p4d = p4d_alloc(&init_mm, dir, address); - if (!p4d) - break; - pud = pud_alloc(&init_mm, p4d, address); - if (!pud) - break; - pmd = pmd_alloc(&init_mm, pud, address); - if (!pmd) - break; - if (remap_area_pmd(pmd, address, end - address, - phys_addr + address, flags)) - break; - error = 0; - address = (address + PGDIR_SIZE) & PGDIR_MASK; - dir++; - } while (address && (address < end)); - flush_tlb_all(); - return error; -} +#define IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL)) +#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1) static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages, void *arg) @@ -118,27 +37,25 @@ static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages, } /* - * Generic mapping function (not visible outside): - */ - -/* - * Remap an arbitrary physical address space into the kernel virtual - * address space. Needed when the kernel wants to access high addresses - * directly. + * ioremap_prot - map bus memory into CPU space + * @phys_addr: bus address of the memory + * @size: size of the resource to map * - * NOTE! We need to allow non-page-aligned mappings too: we will obviously - * have to convert them into an offset in a page-aligned mapping, but the - * caller shouldn't need to know that small detail. + * ioremap_prot gives the caller control over cache coherency attributes (CCA) */ - -#define IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL)) - -void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long flags) +void __iomem *ioremap_prot(phys_addr_t phys_addr, unsigned long size, + unsigned long prot_val) { + unsigned long flags = prot_val & _CACHE_MASK; unsigned long offset, pfn, last_pfn; - struct vm_struct * area; + struct vm_struct *area; phys_addr_t last_addr; - void * addr; + unsigned long vaddr; + void __iomem *cpu_addr; + + cpu_addr = plat_ioremap(phys_addr, size, flags); + if (cpu_addr) + return cpu_addr; phys_addr = fixup_bigphys_addr(phys_addr, size); @@ -181,30 +98,22 @@ void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long area = get_vm_area(size, VM_IOREMAP); if (!area) return NULL; - addr = area->addr; - if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) { - vunmap(addr); + vaddr = (unsigned long)area->addr; + + flags |= _PAGE_GLOBAL | _PAGE_PRESENT | __READABLE | __WRITEABLE; + if (ioremap_page_range(vaddr, vaddr + size, phys_addr, + __pgprot(flags))) { + free_vm_area(area); return NULL; } - return (void __iomem *) (offset + (char *)addr); + return (void __iomem *)(vaddr + offset); } +EXPORT_SYMBOL(ioremap_prot); -#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1) - -void __iounmap(const volatile void __iomem *addr) +void iounmap(const volatile void __iomem *addr) { - struct vm_struct *p; - - if (IS_KSEG1(addr)) - return; - - p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr)); - if (!p) - printk(KERN_ERR "iounmap: bad address %p\n", addr); - - kfree(p); + if (!plat_iounmap(addr) && !IS_KSEG1(addr)) + vunmap((void *)((unsigned long)addr & PAGE_MASK)); } - -EXPORT_SYMBOL(__ioremap); -EXPORT_SYMBOL(__iounmap); +EXPORT_SYMBOL(iounmap); diff --git a/arch/mips/mm/ioremap64.c b/arch/mips/mm/ioremap64.c new file mode 100644 index 000000000000..15e7820d6a5f --- /dev/null +++ b/arch/mips/mm/ioremap64.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <linux/io.h> +#include <ioremap.h> + +void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size, + unsigned long prot_val) +{ + unsigned long flags = prot_val & _CACHE_MASK; + u64 base = (flags == _CACHE_UNCACHED ? IO_BASE : UNCAC_BASE); + void __iomem *addr; + + addr = plat_ioremap(offset, size, flags); + if (!addr) + addr = (void __iomem *)(unsigned long)(base + offset); + return addr; +} +EXPORT_SYMBOL(ioremap_prot); + +void iounmap(const volatile void __iomem *addr) +{ + plat_iounmap(addr); +} +EXPORT_SYMBOL(iounmap); diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index dbdbfe5d8408..eedad47df24f 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -194,9 +194,10 @@ static inline int __init mips_sc_probe(void) return mips_sc_probe_cm3(); /* Ignore anything but MIPSxx processors */ - if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 | - MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 | - MIPS_CPU_ISA_M64R2 | MIPS_CPU_ISA_M64R6))) + if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | + MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | + MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))) return 0; /* Does this MIPS32/MIPS64 CPU have a config2 register? */ diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index da407cdc2135..38c204204529 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -576,7 +576,7 @@ void build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_R5500: if (m4kc_tlbp_war()) uasm_i_nop(p); - /* fall through */ + fallthrough; case CPU_ALCHEMY: tlbw(p); break; diff --git a/arch/mips/mti-malta/Platform b/arch/mips/mti-malta/Platform index 2cc72c9b38e3..41e0d2a2d325 100644 --- a/arch/mips/mti-malta/Platform +++ b/arch/mips/mti-malta/Platform @@ -1,7 +1,6 @@ # # MIPS Malta board # -platform-$(CONFIG_MIPS_MALTA) += mti-malta/ cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta ifdef CONFIG_KVM_GUEST load-$(CONFIG_MIPS_MALTA) += 0x0000000040100000 diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index ff2c1d809538..893af377aacc 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -90,24 +90,24 @@ static void __init console_config(void) static void __init mips_nmi_setup(void) { void *base; - extern char except_vec_nmi; + extern char except_vec_nmi[]; base = cpu_has_veic ? (void *)(CAC_BASE + 0xa80) : (void *)(CAC_BASE + 0x380); - memcpy(base, &except_vec_nmi, 0x80); + memcpy(base, except_vec_nmi, 0x80); flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); } static void __init mips_ejtag_setup(void) { void *base; - extern char except_vec_ejtag_debug; + extern char except_vec_ejtag_debug[]; base = cpu_has_veic ? (void *)(CAC_BASE + 0xa00) : (void *)(CAC_BASE + 0x300); - memcpy(base, &except_vec_ejtag_debug, 0x80); + memcpy(base, except_vec_ejtag_debug, 0x80); flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); } diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform index fb8eb4c0c6ec..4195a097f5f2 100644 --- a/arch/mips/netlogic/Platform +++ b/arch/mips/netlogic/Platform @@ -13,5 +13,4 @@ cflags-$(CONFIG_CPU_XLP) += $(call cc-option,-march=xlp,-march=mips64r2) # # NETLOGIC processor support # -platform-$(CONFIG_NLM_COMMON) += netlogic/ load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000 diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c index d7db1533889a..f90303f31967 100644 --- a/arch/mips/netlogic/xlr/fmn.c +++ b/arch/mips/netlogic/xlr/fmn.c @@ -103,7 +103,7 @@ static irqreturn_t fmn_message_handler(int irq, void *data) mflags = nlm_cop2_enable_irqsave(); } } - }; + } /* Enable message ring intr, to any thread in core */ nlm_fmn_setup_intr(irq, (1 << nlm_threads_per_core) - 1); nlm_cop2_disable_irqrestore(mflags); diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index 03db268cba5c..d3996c4c6440 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -110,7 +110,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case CPU_LOONGSON64: lmodel = &op_model_loongson3_ops; break; - }; + } /* * Always set the backtrace. This allows unsupported CPU types to still diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index a537bf98912c..1493c49ca47a 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -172,15 +172,15 @@ static void mipsxx_cpu_setup(void *args) case 4: w_c0_perfctrl3(0); w_c0_perfcntr3(reg.counter[3]); - /* fall through */ + fallthrough; case 3: w_c0_perfctrl2(0); w_c0_perfcntr2(reg.counter[2]); - /* fall through */ + fallthrough; case 2: w_c0_perfctrl1(0); w_c0_perfcntr1(reg.counter[1]); - /* fall through */ + fallthrough; case 1: w_c0_perfctrl0(0); w_c0_perfcntr0(reg.counter[0]); @@ -198,13 +198,13 @@ static void mipsxx_cpu_start(void *args) switch (counters) { case 4: w_c0_perfctrl3(WHAT | reg.control[3]); - /* fall through */ + fallthrough; case 3: w_c0_perfctrl2(WHAT | reg.control[2]); - /* fall through */ + fallthrough; case 2: w_c0_perfctrl1(WHAT | reg.control[1]); - /* fall through */ + fallthrough; case 1: w_c0_perfctrl0(WHAT | reg.control[0]); } @@ -221,13 +221,13 @@ static void mipsxx_cpu_stop(void *args) switch (counters) { case 4: w_c0_perfctrl3(0); - /* fall through */ + fallthrough; case 3: w_c0_perfctrl2(0); - /* fall through */ + fallthrough; case 2: w_c0_perfctrl1(0); - /* fall through */ + fallthrough; case 1: w_c0_perfctrl0(0); } @@ -245,7 +245,7 @@ static int mipsxx_perfcount_handler(void) switch (counters) { #define HANDLE_COUNTER(n) \ - /* fall through */ \ + fallthrough; \ case n + 1: \ control = r_c0_perfctrl ## n(); \ counter = r_c0_perfcntr ## n(); \ @@ -307,15 +307,15 @@ static void reset_counters(void *arg) case 4: w_c0_perfctrl3(0); w_c0_perfcntr3(0); - /* fall through */ + fallthrough; case 3: w_c0_perfctrl2(0); w_c0_perfcntr2(0); - /* fall through */ + fallthrough; case 2: w_c0_perfctrl1(0); w_c0_perfcntr1(0); - /* fall through */ + fallthrough; case 1: w_c0_perfctrl0(0); w_c0_perfcntr0(0); diff --git a/arch/mips/paravirt/Platform b/arch/mips/paravirt/Platform index 7e76ef25ea17..0b857580dfdd 100644 --- a/arch/mips/paravirt/Platform +++ b/arch/mips/paravirt/Platform @@ -1,7 +1,6 @@ # # Generic para-virtualized guest. # -platform-$(CONFIG_MIPS_PARAVIRT) += paravirt/ cflags-$(CONFIG_MIPS_PARAVIRT) += \ -I$(srctree)/arch/mips/include/asm/mach-paravirt diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 342ce10ef593..0f68d6849978 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -13,10 +13,8 @@ obj-$(CONFIG_PCI_DRIVERS_GENERIC)+= pci-generic.o obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o -obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o -obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ @@ -31,15 +29,10 @@ obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o # These are still pretty much in the old state, watch, go blind. # obj-$(CONFIG_ATH79) += fixup-ath79.o -obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o -obj-$(CONFIG_MACH_LOONGSON64) += fixup-loongson3.o ops-loongson3.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o -obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o -obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o -obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_SGI_IP27) += pci-ip27.o obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c deleted file mode 100644 index 2541f9bc12de..000000000000 --- a/arch/mips/pci/fixup-emma2rh.c +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c - * - * Copyright 2001 MontaVista Software Inc. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/pci.h> - -#include <asm/bootinfo.h> - -#include <asm/emma/emma2rh.h> - -#define EMMA2RH_PCI_HOST_SLOT 0x09 -#define EMMA2RH_USB_SLOT 0x03 -#define PCI_DEVICE_ID_NEC_EMMA2RH 0x014b /* EMMA2RH PCI Host */ - -/* - * we fix up irqs based on the slot number. - * The first entry is at AD:11. - * Fortunately this works because, although we have two pci buses, - * they all have different slot numbers (except for rockhopper slot 20 - * which is handled below). - * - */ - -#define MAX_SLOT_NUM 10 -static unsigned char irq_map[][5] = { - [3] = {0, MARKEINS_PCI_IRQ_INTB, MARKEINS_PCI_IRQ_INTC, - MARKEINS_PCI_IRQ_INTD, 0,}, - [4] = {0, MARKEINS_PCI_IRQ_INTA, 0, 0, 0,}, - [5] = {0, 0, 0, 0, 0,}, - [6] = {0, MARKEINS_PCI_IRQ_INTC, MARKEINS_PCI_IRQ_INTD, - MARKEINS_PCI_IRQ_INTA, MARKEINS_PCI_IRQ_INTB,}, -}; - -static void nec_usb_controller_fixup(struct pci_dev *dev) -{ - if (PCI_SLOT(dev->devfn) == EMMA2RH_USB_SLOT) - /* on board USB controller configuration */ - pci_write_config_dword(dev, 0xe4, 1 << 5); -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, - nec_usb_controller_fixup); - -/* - * Prevent the PCI layer from seeing the resources allocated to this device - * if it is the host bridge by marking it as such. These resources are of - * no consequence to the PCI layer (they are handled elsewhere). - */ -static void emma2rh_pci_host_fixup(struct pci_dev *dev) -{ - int i; - - if (PCI_SLOT(dev->devfn) == EMMA2RH_PCI_HOST_SLOT) { - dev->class &= 0xff; - dev->class |= PCI_CLASS_BRIDGE_HOST << 8; - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } - } -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH, - emma2rh_pci_host_fixup); - -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return irq_map[slot][pin]; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-loongson3.c b/arch/mips/pci/fixup-loongson3.c deleted file mode 100644 index 8a741c2c6685..000000000000 --- a/arch/mips/pci/fixup-loongson3.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * fixup-loongson3.c - * - * Copyright (C) 2012 Lemote, Inc. - * Author: Xiang Yu, xiangy@lemote.com - * Chen Huacai, chenhc@lemote.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - -#include <linux/pci.h> -#include <boot_param.h> - -static void print_fixup_info(const struct pci_dev *pdev) -{ - dev_info(&pdev->dev, "Device %x:%x, irq %d\n", - pdev->vendor, pdev->device, pdev->irq); -} - -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - print_fixup_info(dev); - return dev->irq; -} - -static void pci_fixup_radeon(struct pci_dev *pdev) -{ - struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; - - if (res->start) - return; - - if (!loongson_sysconf.vgabios_addr) - return; - - pci_disable_rom(pdev); - if (res->parent) - release_resource(res); - - res->start = virt_to_phys((void *) loongson_sysconf.vgabios_addr); - res->end = res->start + 256*1024 - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW | - IORESOURCE_PCI_FIXED; - - dev_info(&pdev->dev, "BAR %d: assigned %pR for Radeon ROM\n", - PCI_ROM_RESOURCE, res); -} - -DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID, - PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_radeon); - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c deleted file mode 100644 index 4ad2ef02087b..000000000000 --- a/arch/mips/pci/fixup-pmcmsp.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * PMC-Sierra MSP board specific pci fixups. - * - * Copyright 2001 MontaVista Software Inc. - * Copyright 2005-2007 PMC-Sierra, Inc - * - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifdef CONFIG_PCI - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/byteorder.h> - -#include <msp_pci.h> -#include <msp_cic_int.h> - -/* PCI interrupt pins */ -#define IRQ4 MSP_INT_EXT4 -#define IRQ5 MSP_INT_EXT5 -#define IRQ6 MSP_INT_EXT6 - -#if defined(CONFIG_PMC_MSP7120_GW) -/* Garibaldi Board IRQ wiring to PCI slots */ -static char irq_tab[][5] = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ - {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ - {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ - {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ - {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ - {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ - {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ - {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ - {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ - {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ - {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ - {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ - {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ - {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ - {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ - {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ - {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ - {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ - {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ - {0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */ - {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ - {0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */ - {0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */ -}; - -#elif defined(CONFIG_PMC_MSP7120_EVAL) - -/* MSP7120 Eval Board IRQ wiring to PCI slots */ -static char irq_tab[][5] = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ - {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ - {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ - {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ - {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ - {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ - {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ - {0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */ - {0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */ - {0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */ - {0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */ - {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ - {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ - {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ - {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ - {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ - {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ - {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ - {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ - {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ - {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ - {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ - {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ -}; - -#else - -/* Unknown board -- don't assign any IRQs */ -static char irq_tab[][5] = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */ - {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */ - {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */ - {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */ - {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */ - {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */ - {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */ - {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */ - {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */ - {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */ - {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */ - {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */ - {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */ - {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */ - {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */ - {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */ - {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */ - {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */ - {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */ - {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */ - {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */ - {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */ - {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */ - {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */ -}; -#endif - -/***************************************************************************** - * - * FUNCTION: pcibios_plat_dev_init - * _________________________________________________________________________ - * - * DESCRIPTION: Perform platform specific device initialization at - * pci_enable_device() time. - * None are needed for the MSP7120 PCI Controller. - * - * INPUTS: dev - structure describing the PCI device - * - * OUTPUTS: none - * - * RETURNS: PCIBIOS_SUCCESSFUL - * - ****************************************************************************/ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: pcibios_map_irq - * _________________________________________________________________________ - * - * DESCRIPTION: Perform board supplied PCI IRQ mapping routine. - * - * INPUTS: dev - unused - * slot - PCI slot. Identified by which bit of the AD[] bus - * drives the IDSEL line. AD[10] is 0, AD[31] is - * slot 21. - * pin - numbered using the scheme of the PCI_INTERRUPT_PIN - * field of the config header. - * - * OUTPUTS: none - * - * RETURNS: IRQ number - * - ****************************************************************************/ -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ -#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL) - printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n"); -#endif - printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n", - irq_tab[slot][pin], slot, pin); - - return irq_tab[slot][pin]; -} - -#endif /* CONFIG_PCI */ diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c index adb9a58641e8..de012f8bd8c3 100644 --- a/arch/mips/pci/fixup-sni.c +++ b/arch/mips/pci/fixup-sni.c @@ -151,8 +151,7 @@ int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) case SNI_BRD_PCI_MTOWER: if (is_rm300_revd()) return irq_tab_rm300d[slot][pin]; - /* fall through */ - + fallthrough; case SNI_BRD_PCI_DESKTOP: return irq_tab_rm200[slot][pin]; diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c index 925c72348fb6..dc6dc2741272 100644 --- a/arch/mips/pci/ops-bcm63xx.c +++ b/arch/mips/pci/ops-bcm63xx.c @@ -474,7 +474,7 @@ static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn) if (PCI_SLOT(devfn) == 0) return bcm_pcie_readl(PCIE_DLSTATUS_REG) & DLSTATUS_PHYLINKUP; - /* else, fall through */ + fallthrough; default: return false; } diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c deleted file mode 100644 index 65f47344536c..000000000000 --- a/arch/mips/pci/ops-emma2rh.c +++ /dev/null @@ -1,167 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/pci/ops-vr41xx.c - * - * Copyright 2001 MontaVista Software Inc. - */ - -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/types.h> - -#include <asm/addrspace.h> - -#include <asm/emma/emma2rh.h> - -#define RTABORT (0x1<<9) -#define RMABORT (0x1<<10) -#define EMMA2RH_PCI_SLOT_NUM 9 /* 0000:09.0 is final PCI device */ - -/* - * access config space - */ - -static int check_args(struct pci_bus *bus, u32 devfn, u32 * bus_num) -{ - /* check if the bus is top-level */ - if (bus->parent != NULL) - *bus_num = bus->number; - else - *bus_num = 0; - - if (*bus_num == 0) { - /* Type 0 */ - if (PCI_SLOT(devfn) >= 10) - return PCIBIOS_DEVICE_NOT_FOUND; - } else { - /* Type 1 */ - if ((*bus_num >= 64) || (PCI_SLOT(devfn) >= 16)) - return PCIBIOS_DEVICE_NOT_FOUND; - } - return 0; -} - -static inline int set_pci_configuration_address(unsigned char bus_num, - unsigned int devfn, int where) -{ - u32 config_win0; - - emma2rh_out32(EMMA2RH_PCI_INT, ~RMABORT); - if (bus_num == 0) - /* - * Type 0 configuration - */ - config_win0 = (1 << (22 + PCI_SLOT(devfn))) | (5 << 9); - else - /* - * Type 1 configuration - */ - config_win0 = (bus_num << 26) | (PCI_SLOT(devfn) << 22) | - (1 << 15) | (5 << 9); - - emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, config_win0); - - return 0; -} - -static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, uint32_t * val) -{ - u32 bus_num; - u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE); - u32 backup_win0; - u32 data; - - *val = 0xffffffffU; - - if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND) - return PCIBIOS_DEVICE_NOT_FOUND; - - backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR); - - if (set_pci_configuration_address(bus_num, devfn, where) < 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - data = - *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) + - (where & 0xfffffffc)); - - switch (size) { - case 1: - *val = (data >> ((where & 3) << 3)) & 0xffU; - break; - case 2: - *val = (data >> ((where & 2) << 3)) & 0xffffU; - break; - case 4: - *val = data; - break; - default: - emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0); - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - - emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0); - - if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - u32 bus_num; - u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE); - u32 backup_win0; - u32 data; - int shift; - - if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND) - return PCIBIOS_DEVICE_NOT_FOUND; - - backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR); - - if (set_pci_configuration_address(bus_num, devfn, where) < 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - /* read modify write */ - data = - *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) + - (where & 0xfffffffc)); - - switch (size) { - case 1: - shift = (where & 3) << 3; - data &= ~(0xffU << shift); - data |= ((val & 0xffU) << shift); - break; - case 2: - shift = (where & 2) << 3; - data &= ~(0xffffU << shift); - data |= ((val & 0xffffU) << shift); - break; - case 4: - data = val; - break; - default: - emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0); - return PCIBIOS_FUNC_NOT_SUPPORTED; - } - *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) + - (where & 0xfffffffc)) = data; - - emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0); - if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops emma2rh_pci_ops = { - .read = pci_config_read, - .write = pci_config_write, -}; diff --git a/arch/mips/pci/ops-loongson3.c b/arch/mips/pci/ops-loongson3.c deleted file mode 100644 index 2f6ad36bdea6..000000000000 --- a/arch/mips/pci/ops-loongson3.c +++ /dev/null @@ -1,116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> - -#include <asm/mips-boards/bonito64.h> - -#include <loongson.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -#define HT1LO_PCICFG_BASE 0x1a000000 -#define HT1LO_PCICFG_BASE_TP1 0x1b000000 - -static int loongson3_pci_config_access(unsigned char access_type, - struct pci_bus *bus, unsigned int devfn, - int where, u32 *data) -{ - unsigned char busnum = bus->number; - int function = PCI_FUNC(devfn); - int device = PCI_SLOT(devfn); - int reg = where & ~3; - void *addrp; - u64 addr; - - if (where < PCI_CFG_SPACE_SIZE) { /* standard config */ - addr = (busnum << 16) | (device << 11) | (function << 8) | reg; - if (busnum == 0) { - if (device > 31) - return PCIBIOS_DEVICE_NOT_FOUND; - addrp = (void *)TO_UNCAC(HT1LO_PCICFG_BASE | addr); - } else { - addrp = (void *)TO_UNCAC(HT1LO_PCICFG_BASE_TP1 | addr); - } - } else if (where < PCI_CFG_SPACE_EXP_SIZE) { /* extended config */ - struct pci_dev *rootdev; - - rootdev = pci_get_domain_bus_and_slot(0, 0, 0); - if (!rootdev) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = pci_resource_start(rootdev, 3); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr |= busnum << 20 | device << 15 | function << 12 | reg; - addrp = (void *)TO_UNCAC(addr); - } else { - return PCIBIOS_DEVICE_NOT_FOUND; - } - - if (access_type == PCI_ACCESS_WRITE) - writel(*data, addrp); - else { - *data = readl(addrp); - if (*data == 0xffffffff) { - *data = -1; - return PCIBIOS_DEVICE_NOT_FOUND; - } - } - return PCIBIOS_SUCCESSFUL; -} - -static int loongson3_pci_pcibios_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - u32 data = 0; - int ret = loongson3_pci_config_access(PCI_ACCESS_READ, - bus, devfn, where, &data); - - if (ret != PCIBIOS_SUCCESSFUL) - return ret; - - if (size == 1) - *val = (data >> ((where & 3) << 3)) & 0xff; - else if (size == 2) - *val = (data >> ((where & 3) << 3)) & 0xffff; - else - *val = data; - - return PCIBIOS_SUCCESSFUL; -} - -static int loongson3_pci_pcibios_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - u32 data = 0; - int ret; - - if (size == 4) - data = val; - else { - ret = loongson3_pci_config_access(PCI_ACCESS_READ, - bus, devfn, where, &data); - if (ret != PCIBIOS_SUCCESSFUL) - return ret; - - if (size == 1) - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - else if (size == 2) - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - } - - ret = loongson3_pci_config_access(PCI_ACCESS_WRITE, - bus, devfn, where, &data); - - return ret; -} - -struct pci_ops loongson_pci_ops = { - .read = loongson3_pci_pcibios_read, - .write = loongson3_pci_pcibios_write -}; diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c deleted file mode 100644 index b00658d19116..000000000000 --- a/arch/mips/pci/ops-nile4.c +++ /dev/null @@ -1,136 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/kernel.h> -#include <linux/pci.h> -#include <asm/bootinfo.h> - -#include <asm/lasat/lasat.h> -#include <asm/nile4.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -#define LO(reg) (reg / 4) -#define HI(reg) (reg / 4 + 1) - -volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE; - -static int nile4_pcibios_config_access(unsigned char access_type, - struct pci_bus *bus, unsigned int devfn, int where, u32 *val) -{ - unsigned char busnum = bus->number; - u32 adr, mask, err; - - if ((busnum == 0) && (PCI_SLOT(devfn) > 8)) - /* The addressing scheme chosen leaves room for just - * 8 devices on the first busnum (besides the PCI - * controller itself) */ - return PCIBIOS_DEVICE_NOT_FOUND; - - if ((busnum == 0) && (devfn == PCI_DEVFN(0, 0))) { - /* Access controller registers directly */ - if (access_type == PCI_ACCESS_WRITE) { - vrc_pciregs[(0x200 + where) >> 2] = *val; - } else { - *val = vrc_pciregs[(0x200 + where) >> 2]; - } - return PCIBIOS_SUCCESSFUL; - } - - /* Temporarily map PCI Window 1 to config space */ - mask = vrc_pciregs[LO(NILE4_PCIINIT1)]; - vrc_pciregs[LO(NILE4_PCIINIT1)] = 0x0000001a | (busnum ? 0x200 : 0); - - /* Clear PCI Error register. This also clears the Error Type - * bits in the Control register */ - vrc_pciregs[LO(NILE4_PCIERR)] = 0; - vrc_pciregs[HI(NILE4_PCIERR)] = 0; - - /* Setup address */ - if (busnum == 0) - adr = - KSEG1ADDR(PCI_WINDOW1) + - ((1 << (PCI_SLOT(devfn) + 15)) | (PCI_FUNC(devfn) << 8) - | (where & ~3)); - else - adr = KSEG1ADDR(PCI_WINDOW1) | (busnum << 16) | (devfn << 8) | - (where & ~3); - - if (access_type == PCI_ACCESS_WRITE) - *(u32 *) adr = *val; - else - *val = *(u32 *) adr; - - /* Check for master or target abort */ - err = (vrc_pciregs[HI(NILE4_PCICTRL)] >> 5) & 0x7; - - /* Restore PCI Window 1 */ - vrc_pciregs[LO(NILE4_PCIINIT1)] = mask; - - if (err) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - u32 data = 0; - int err; - - if ((size == 2) && (where & 1)) - return PCIBIOS_BAD_REGISTER_NUMBER; - else if ((size == 4) && (where & 3)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, - &data); - if (err) - return err; - - if (size == 1) - *val = (data >> ((where & 3) << 3)) & 0xff; - else if (size == 2) - *val = (data >> ((where & 3) << 3)) & 0xffff; - else - *val = data; - - return PCIBIOS_SUCCESSFUL; -} - -static int nile4_pcibios_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - u32 data = 0; - int err; - - if ((size == 2) && (where & 1)) - return PCIBIOS_BAD_REGISTER_NUMBER; - else if ((size == 4) && (where & 3)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, - &data); - if (err) - return err; - - if (size == 1) - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - else if (size == 2) - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - else - data = val; - - if (nile4_pcibios_config_access - (PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops nile4_pci_ops = { - .read = nile4_pcibios_read, - .write = nile4_pcibios_write, -}; diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c deleted file mode 100644 index ad5dd711c575..000000000000 --- a/arch/mips/pci/ops-pmcmsp.c +++ /dev/null @@ -1,944 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * PMC-Sierra MSP board specific pci_ops - * - * Copyright 2001 MontaVista Software Inc. - * Copyright 2005-2007 PMC-Sierra, Inc - * - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * Much of the code is derived from the original DDB5074 port by - * Geert Uytterhoeven <geert@linux-m68k.org> - */ - -#define PCI_COUNTERS 1 - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/interrupt.h> - -#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/byteorder.h> -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) -#include <asm/mipsmtregs.h> -#endif - -#include <msp_prom.h> -#include <msp_cic_int.h> -#include <msp_pci.h> -#include <msp_regs.h> -#include <msp_regops.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) -static char proc_init; -extern struct proc_dir_entry *proc_bus_pci_dir; -unsigned int pci_int_count[32]; - -static void pci_proc_init(void); - -/***************************************************************************** - * - * FUNCTION: show_msp_pci_counts - * _________________________________________________________________________ - * - * DESCRIPTION: Prints the count of how many times each PCI - * interrupt has asserted. Can be invoked by the - * /proc filesystem. - * - * INPUTS: m - synthetic file construction data - * v - iterator - * - * RETURNS: 0 or error - * - ****************************************************************************/ -static int show_msp_pci_counts(struct seq_file *m, void *v) -{ - int i; - unsigned int intcount, total = 0; - - for (i = 0; i < 32; ++i) { - intcount = pci_int_count[i]; - if (intcount != 0) { - seq_printf(m, "[%d] = %u\n", i, intcount); - total += intcount; - } - } - - seq_printf(m, "total = %u\n", total); - return 0; -} - -/***************************************************************************** - * - * FUNCTION: gen_pci_cfg_wr_show - * _________________________________________________________________________ - * - * DESCRIPTION: Generates a configuration write cycle for debug purposes. - * The IDSEL line asserted and location and data written are - * immaterial. Just want to be able to prove that a - * configuration write can be correctly generated on the - * PCI bus. Intent is that this function by invocable from - * the /proc filesystem. - * - * INPUTS: m - synthetic file construction data - * v - iterator - * - * RETURNS: 0 or error - * - ****************************************************************************/ -static int gen_pci_cfg_wr_show(struct seq_file *m, void *v) -{ - unsigned char where = 0; /* Write to static Device/Vendor ID */ - unsigned char bus_num = 0; /* Bus 0 */ - unsigned char dev_fn = 0xF; /* Arbitrary device number */ - u32 wr_data = 0xFF00AA00; /* Arbitrary data */ - struct msp_pci_regs *preg = (void *)PCI_BASE_REG; - unsigned long value; - int intr; - - seq_puts(m, "PMC MSP PCI: Beginning\n"); - - if (proc_init == 0) { - pci_proc_init(); - proc_init = ~0; - } - - seq_puts(m, "PMC MSP PCI: Before Cfg Wr\n"); - - /* - * Generate PCI Configuration Write Cycle - */ - - /* Clear cause register bits */ - preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); - - /* Setup address that is to appear on PCI bus */ - preg->config_addr = BPCI_CFGADDR_ENABLE | - (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | - (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | - (where & 0xFC); - - value = cpu_to_le32(wr_data); - - /* Launch the PCI configuration write cycle */ - *PCI_CONFIG_SPACE_REG = value; - - /* - * Check if the PCI configuration cycle (rd or wr) succeeded, by - * checking the status bits for errors like master or target abort. - */ - intr = preg->if_status; - - seq_puts(m, "PMC MSP PCI: After Cfg Wr\n"); - return 0; -} - -/***************************************************************************** - * - * FUNCTION: pci_proc_init - * _________________________________________________________________________ - * - * DESCRIPTION: Create entries in the /proc filesystem for debug access. - * - * INPUTS: none - * - * OUTPUTS: none - * - * RETURNS: none - * - ****************************************************************************/ -static void pci_proc_init(void) -{ - proc_create_single("pmc_msp_pci_rd_cnt", 0, NULL, show_msp_pci_counts); - proc_create_single("pmc_msp_pci_cfg_wr", 0, NULL, gen_pci_cfg_wr_show); -} -#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ - -/***************************************************************************** - * - * STRUCT: pci_io_resource - * _________________________________________________________________________ - * - * DESCRIPTION: Defines the address range that pciauto() will use to - * assign to the I/O BARs of PCI devices. - * - * Use the start and end addresses of the MSP7120 PCI Host - * Controller I/O space, in the form that they appear on the - * PCI bus AFTER MSP7120 has performed address translation. - * - * For I/O accesses, MSP7120 ignores OATRAN and maps I/O - * accesses into the bottom 0xFFF region of address space, - * so that is the range to put into the pci_io_resource - * struct. - * - * In MSP4200, the start address was 0x04 instead of the - * expected 0x00. Will just assume there was a good reason - * for this! - * - * NOTES: Linux, by default, will assign I/O space to the lowest - * region of address space. Since MSP7120 and Linux, - * by default, have no offset in between how they map, the - * io_offset element of pci_controller struct should be set - * to zero. - * ELEMENTS: - * name - String used for a meaningful name. - * - * start - Start address of MSP7120's I/O space, as MSP7120 presents - * the address on the PCI bus. - * - * end - End address of MSP7120's I/O space, as MSP7120 presents - * the address on the PCI bus. - * - * flags - Attributes indicating the type of resource. In this case, - * indicate I/O space. - * - ****************************************************************************/ -static struct resource pci_io_resource = { - .name = "pci IO space", - .start = 0x04, - .end = 0x0FFF, - .flags = IORESOURCE_IO /* I/O space */ -}; - -/***************************************************************************** - * - * STRUCT: pci_mem_resource - * _________________________________________________________________________ - * - * DESCRIPTION: Defines the address range that pciauto() will use to - * assign to the memory BARs of PCI devices. - * - * The .start and .end values are dependent upon how address - * translation is performed by the OATRAN regiser. - * - * The values to use for .start and .end are the values - * in the form they appear on the PCI bus AFTER MSP7120 has - * performed OATRAN address translation. - * - * ELEMENTS: - * name - String used for a meaningful name. - * - * start - Start address of MSP7120's memory space, as MSP7120 presents - * the address on the PCI bus. - * - * end - End address of MSP7120's memory space, as MSP7120 presents - * the address on the PCI bus. - * - * flags - Attributes indicating the type of resource. In this case, - * indicate memory space. - * - ****************************************************************************/ -static struct resource pci_mem_resource = { - .name = "pci memory space", - .start = MSP_PCI_SPACE_BASE, - .end = MSP_PCI_SPACE_END, - .flags = IORESOURCE_MEM /* memory space */ -}; - -/***************************************************************************** - * - * FUNCTION: bpci_interrupt - * _________________________________________________________________________ - * - * DESCRIPTION: PCI status interrupt handler. Updates the count of how - * many times each status bit has been set, then clears - * the status bits. If the appropriate macros are defined, - * these counts can be viewed via the /proc filesystem. - * - * INPUTS: irq - unused - * dev_id - unused - * pt_regs - unused - * - * OUTPUTS: none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * - ****************************************************************************/ -static irqreturn_t bpci_interrupt(int irq, void *dev_id) -{ - struct msp_pci_regs *preg = (void *)PCI_BASE_REG; - unsigned int stat = preg->if_status; - -#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) - int i; - for (i = 0; i < 32; ++i) { - if ((1 << i) & stat) - ++pci_int_count[i]; - } -#endif /* PROC_FS && PCI_COUNTERS */ - - /* printk("PCI ISR: Status=%08X\n", stat); */ - - /* write to clear all asserted interrupts */ - preg->if_status = stat; - - return IRQ_HANDLED; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_config_access - * _________________________________________________________________________ - * - * DESCRIPTION: Performs a PCI configuration access (rd or wr), then - * checks that the access succeeded by querying MSP7120's - * PCI status bits. - * - * INPUTS: - * access_type - kind of PCI configuration cycle to perform - * (read or write). Legal values are - * PCI_ACCESS_WRITE and PCI_ACCESS_READ. - * - * bus - pointer to the bus number of the device to - * be targeted for the configuration cycle. - * The only element of the pci_bus structure - * used is bus->number. This argument determines - * if the configuration access will be Type 0 or - * Type 1. Since MSP7120 assumes itself to be the - * PCI Host, any non-zero bus->number generates - * a Type 1 access. - * - * devfn - this is an 8-bit field. The lower three bits - * specify the function number of the device to - * be targeted for the configuration cycle, with - * all three-bit combinations being legal. The - * upper five bits specify the device number, - * with legal values being 10 to 31. - * - * where - address within the Configuration Header - * space to access. - * - * data - for write accesses, contains the data to - * write. - * - * OUTPUTS: - * data - for read accesses, contains the value read. - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - access failure - * - ****************************************************************************/ -int msp_pcibios_config_access(unsigned char access_type, - struct pci_bus *bus, - unsigned int devfn, - unsigned char where, - u32 *data) -{ - struct msp_pci_regs *preg = (void *)PCI_BASE_REG; - unsigned char bus_num = bus->number; - unsigned char dev_fn = (unsigned char)devfn; - unsigned long intr; - unsigned long value; - static char pciirqflag; - int ret; -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) - unsigned int vpe_status; -#endif - -#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS) - if (proc_init == 0) { - pci_proc_init(); - proc_init = ~0; - } -#endif /* CONFIG_PROC_FS && PCI_COUNTERS */ - - /* - * Just the first time this function invokes, allocate - * an interrupt line for PCI host status interrupts. The - * allocation assigns an interrupt handler to the interrupt. - */ - if (pciirqflag == 0) { - ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */ - bpci_interrupt, - IRQF_SHARED, - "PMC MSP PCI Host", - preg); - if (ret != 0) - return ret; - pciirqflag = ~0; - } - -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) - vpe_status = dvpe(); -#endif - - /* - * Clear PCI cause register bits. - * - * In Polo, the PCI Host had a dedicated DMA called the - * Block Copy (not to be confused with the general purpose Block - * Copy Engine block). There appear to have been special interrupts - * for this Block Copy, called Block Copy 0 Fault (BC0F) and - * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this - * dedicated Block Copy block, so these two interrupts are now - * marked reserved. In case the Block Copy is resurrected in a - * future design, maintain the code that treats these two interrupts - * specially. - * - * Write to clear all interrupts in the PCI status register, aside - * from BC0F and BC1F. - */ - preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); - - /* Setup address that is to appear on PCI bus */ - preg->config_addr = BPCI_CFGADDR_ENABLE | - (bus_num << BPCI_CFGADDR_BUSNUM_SHF) | - (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) | - (where & 0xFC); - - /* IF access is a PCI configuration write */ - if (access_type == PCI_ACCESS_WRITE) { - value = cpu_to_le32(*data); - *PCI_CONFIG_SPACE_REG = value; - } else { - /* ELSE access is a PCI configuration read */ - value = le32_to_cpu(*PCI_CONFIG_SPACE_REG); - *data = value; - } - - /* - * Check if the PCI configuration cycle (rd or wr) succeeded, by - * checking the status bits for errors like master or target abort. - */ - intr = preg->if_status; - - /* Clear config access */ - preg->config_addr = 0; - - /* IF error occurred */ - if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) { - /* Clear status bits */ - preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F); - -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) - evpe(vpe_status); -#endif - - return -1; - } - -#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL) - evpe(vpe_status); -#endif - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_read_config_byte - * _________________________________________________________________________ - * - * DESCRIPTION: Read a byte from PCI configuration address spac - * Since the hardware can't address 8 bit chunks - * directly, read a 32-bit chunk, then mask off extraneous - * bits. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the read is destined for. - * devfn - device/function combination that the read is - * destined for. - * where - register within the Configuration Header space - * to access. - * - * OUTPUTS val - read data - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - read access failure - * - ****************************************************************************/ -static int -msp_pcibios_read_config_byte(struct pci_bus *bus, - unsigned int devfn, - int where, - u32 *val) -{ - u32 data = 0; - - /* - * If the config access did not complete normally (e.g., underwent - * master abort) do the PCI compliant thing, which is to supply an - * all ones value. - */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) { - *val = 0xFFFFFFFF; - return -1; - } - - *val = (data >> ((where & 3) << 3)) & 0x0ff; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_read_config_word - * _________________________________________________________________________ - * - * DESCRIPTION: Read a word (16 bits) from PCI configuration address space. - * Since the hardware can't address 16 bit chunks - * directly, read a 32-bit chunk, then mask off extraneous - * bits. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the read is destined for. - * devfn - device/function combination that the read is - * destined for. - * where - register within the Configuration Header space - * to access. - * - * OUTPUTS val - read data - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - read access failure - * - ****************************************************************************/ -static int -msp_pcibios_read_config_word(struct pci_bus *bus, - unsigned int devfn, - int where, - u32 *val) -{ - u32 data = 0; - - /* if (where & 1) */ /* Commented out non-compliant code. - * Should allow word access to configuration - * registers, with only exception being when - * the word access would wrap around into - * the next dword. - */ - if ((where & 3) == 3) { - *val = 0xFFFFFFFF; - return PCIBIOS_BAD_REGISTER_NUMBER; - } - - /* - * If the config access did not complete normally (e.g., underwent - * master abort) do the PCI compliant thing, which is to supply an - * all ones value. - */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) { - *val = 0xFFFFFFFF; - return -1; - } - - *val = (data >> ((where & 3) << 3)) & 0x0ffff; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_read_config_dword - * _________________________________________________________________________ - * - * DESCRIPTION: Read a double word (32 bits) from PCI configuration - * address space. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the read is destined for. - * devfn - device/function combination that the read is - * destined for. - * where - register within the Configuration Header space - * to access. - * - * OUTPUTS val - read data - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - read access failure - * - ****************************************************************************/ -static int -msp_pcibios_read_config_dword(struct pci_bus *bus, - unsigned int devfn, - int where, - u32 *val) -{ - u32 data = 0; - - /* Address must be dword aligned. */ - if (where & 3) { - *val = 0xFFFFFFFF; - return PCIBIOS_BAD_REGISTER_NUMBER; - } - - /* - * If the config access did not complete normally (e.g., underwent - * master abort) do the PCI compliant thing, which is to supply an - * all ones value. - */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) { - *val = 0xFFFFFFFF; - return -1; - } - - *val = data; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_write_config_byte - * _________________________________________________________________________ - * - * DESCRIPTION: Write a byte to PCI configuration address space. - * Since the hardware can't address 8 bit chunks - * directly, a read-modify-write is performed. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * val - value to write - * - * OUTPUTS none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - write access failure - * - ****************************************************************************/ -static int -msp_pcibios_write_config_byte(struct pci_bus *bus, - unsigned int devfn, - int where, - u8 val) -{ - u32 data = 0; - - /* read config space */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) - return -1; - - /* modify the byte within the dword */ - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - /* write back the full dword */ - if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, - where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_write_config_word - * _________________________________________________________________________ - * - * DESCRIPTION: Write a word (16-bits) to PCI configuration address space. - * Since the hardware can't address 16 bit chunks - * directly, a read-modify-write is performed. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * val - value to write - * - * OUTPUTS none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - write access failure - * - ****************************************************************************/ -static int -msp_pcibios_write_config_word(struct pci_bus *bus, - unsigned int devfn, - int where, - u16 val) -{ - u32 data = 0; - - /* Fixed non-compliance: if (where & 1) */ - if ((where & 3) == 3) - return PCIBIOS_BAD_REGISTER_NUMBER; - - /* read config space */ - if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) - return -1; - - /* modify the word within the dword */ - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - /* write back the full dword */ - if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, - where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_write_config_dword - * _________________________________________________________________________ - * - * DESCRIPTION: Write a double word (32-bits) to PCI configuration address - * space. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * val - value to write - * - * OUTPUTS none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * PCIBIOS_BAD_REGISTER_NUMBER - bad register address - * -1 - write access failure - * - ****************************************************************************/ -static int -msp_pcibios_write_config_dword(struct pci_bus *bus, - unsigned int devfn, - int where, - u32 val) -{ - /* check that address is dword aligned */ - if (where & 3) - return PCIBIOS_BAD_REGISTER_NUMBER; - - /* perform write */ - if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, - where, &val)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_read_config - * _________________________________________________________________________ - * - * DESCRIPTION: Interface the PCI configuration read request with - * the appropriate function, based on how many bytes - * the read request is. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * size - in units of bytes, should be 1, 2, or 4. - * - * OUTPUTS val - value read, with any extraneous bytes masked - * to zero. - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - failure - * - ****************************************************************************/ -int -msp_pcibios_read_config(struct pci_bus *bus, - unsigned int devfn, - int where, - int size, - u32 *val) -{ - if (size == 1) { - if (msp_pcibios_read_config_byte(bus, devfn, where, val)) { - return -1; - } - } else if (size == 2) { - if (msp_pcibios_read_config_word(bus, devfn, where, val)) { - return -1; - } - } else if (size == 4) { - if (msp_pcibios_read_config_dword(bus, devfn, where, val)) { - return -1; - } - } else { - *val = 0xFFFFFFFF; - return -1; - } - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * FUNCTION: msp_pcibios_write_config - * _________________________________________________________________________ - * - * DESCRIPTION: Interface the PCI configuration write request with - * the appropriate function, based on how many bytes - * the read request is. - * - * INPUTS bus - structure containing attributes for the PCI bus - * that the write is destined for. - * devfn - device/function combination that the write is - * destined for. - * where - register within the Configuration Header space - * to access. - * size - in units of bytes, should be 1, 2, or 4. - * val - value to write - * - * OUTPUTS: none - * - * RETURNS: PCIBIOS_SUCCESSFUL - success - * -1 - failure - * - ****************************************************************************/ -int -msp_pcibios_write_config(struct pci_bus *bus, - unsigned int devfn, - int where, - int size, - u32 val) -{ - if (size == 1) { - if (msp_pcibios_write_config_byte(bus, devfn, - where, (u8)(0xFF & val))) { - return -1; - } - } else if (size == 2) { - if (msp_pcibios_write_config_word(bus, devfn, - where, (u16)(0xFFFF & val))) { - return -1; - } - } else if (size == 4) { - if (msp_pcibios_write_config_dword(bus, devfn, where, val)) { - return -1; - } - } else { - return -1; - } - - return PCIBIOS_SUCCESSFUL; -} - -/***************************************************************************** - * - * STRUCTURE: msp_pci_ops - * _________________________________________________________________________ - * - * DESCRIPTION: structure to abstract the hardware specific PCI - * configuration accesses. - * - * ELEMENTS: - * read - function for Linux to generate PCI Configuration reads. - * write - function for Linux to generate PCI Configuration writes. - * - ****************************************************************************/ -struct pci_ops msp_pci_ops = { - .read = msp_pcibios_read_config, - .write = msp_pcibios_write_config -}; - -/***************************************************************************** - * - * STRUCTURE: msp_pci_controller - * _________________________________________________________________________ - * - * Describes the attributes of the MSP7120 PCI Host Controller - * - * ELEMENTS: - * pci_ops - abstracts the hardware specific PCI configuration - * accesses. - * - * mem_resource - address range pciauto() uses to assign to PCI device - * memory BARs. - * - * mem_offset - offset between how MSP7120 outbound PCI memory - * transaction addresses appear on the PCI bus and how Linux - * wants to configure memory BARs of the PCI devices. - * MSP7120 does nothing funky, so just set to zero. - * - * io_resource - address range pciauto() uses to assign to PCI device - * I/O BARs. - * - * io_offset - offset between how MSP7120 outbound PCI I/O - * transaction addresses appear on the PCI bus and how - * Linux defaults to configure I/O BARs of the PCI devices. - * MSP7120 maps outbound I/O accesses into the bottom - * bottom 4K of PCI address space (and ignores OATRAN). - * Since the Linux default is to configure I/O BARs to the - * bottom 4K, no special offset is needed. Just set to zero. - * - ****************************************************************************/ -static struct pci_controller msp_pci_controller = { - .pci_ops = &msp_pci_ops, - .mem_resource = &pci_mem_resource, - .mem_offset = 0, - .io_map_base = MSP_PCI_IOSPACE_BASE, - .io_resource = &pci_io_resource, - .io_offset = 0 -}; - -/***************************************************************************** - * - * FUNCTION: msp_pci_init - * _________________________________________________________________________ - * - * DESCRIPTION: Initialize the PCI Host Controller and register it with - * Linux so Linux can seize control of the PCI bus. - * - ****************************************************************************/ -void __init msp_pci_init(void) -{ - struct msp_pci_regs *preg = (void *)PCI_BASE_REG; - u32 id; - - /* Extract Device ID */ - id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12; - - /* Check if JTAG ID identifies MSP7120 */ - if (!MSP_HAS_PCI(id)) { - printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id); - goto no_pci; - } - - /* - * Enable flushing of the PCI-SDRAM queue upon a read - * of the SDRAM's Memory Configuration Register. - */ - *(unsigned long *)QFLUSH_REG_1 = 3; - - /* Configure PCI Host Controller. */ - preg->if_status = ~0; /* Clear cause register bits */ - preg->config_addr = 0; /* Clear config access */ - preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */ - preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */ - - /* configure so inb(), outb(), and family are functional */ - set_io_port_base(MSP_PCI_IOSPACE_BASE); - - /* Tell Linux the details of the MSP7120 PCI Host Controller */ - register_pci_controller(&msp_pci_controller); - - return; - -no_pci: - /* Disable PCI channel */ - printk(KERN_WARNING "PCI: no host PCI bus detected\n"); -} diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c index 01a2af8215c8..7285b5667568 100644 --- a/arch/mips/pci/pci-alchemy.c +++ b/arch/mips/pci/pci-alchemy.c @@ -52,7 +52,7 @@ struct alchemy_pci_context { static struct alchemy_pci_context *__alchemy_pci_ctx; -/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr +/* IO/MEM resources for PCI. Keep the memres in sync with fixup_bigphys_addr * in arch/mips/alchemy/common/setup.c */ static struct resource alchemy_pci_def_memres = { diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c deleted file mode 100644 index 156091a3e341..000000000000 --- a/arch/mips/pci/pci-emma2rh.c +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) NEC Electronics Corporation 2004-2006 - * - * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c - * - * Copyright 2001 MontaVista Software Inc. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/pci.h> - -#include <asm/bootinfo.h> - -#include <asm/emma/emma2rh.h> - -static struct resource pci_io_resource = { - .name = "pci IO space", - .start = EMMA2RH_PCI_IO_BASE, - .end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource pci_mem_resource = { - .name = "pci memory space", - .start = EMMA2RH_PCI_MEM_BASE, - .end = EMMA2RH_PCI_MEM_BASE + EMMA2RH_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -extern struct pci_ops emma2rh_pci_ops; - -static struct pci_controller emma2rh_pci_controller = { - .pci_ops = &emma2rh_pci_ops, - .mem_resource = &pci_mem_resource, - .io_resource = &pci_io_resource, - .mem_offset = -0x04000000, - .io_offset = 0, -}; - -static void __init emma2rh_pci_init(void) -{ - /* setup PCI interface */ - emma2rh_out32(EMMA2RH_PCI_ARBIT_CTR, 0x70f); - - emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x80000a18); - emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_COMMAND, - PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_CAP_LIST | - PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_0, 0x10000000); - emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_1, 0x00000000); - - emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x12000000 | 0x218); - emma2rh_out32(EMMA2RH_PCI_IWIN1_CTR, 0x18000000 | 0x600); - emma2rh_out32(EMMA2RH_PCI_INIT_ESWP, 0x00000200); - - emma2rh_out32(EMMA2RH_PCI_TWIN_CTR, 0x00009200); - emma2rh_out32(EMMA2RH_PCI_TWIN_BADR, 0x00000000); - emma2rh_out32(EMMA2RH_PCI_TWIN0_DADR, 0x00000000); - emma2rh_out32(EMMA2RH_PCI_TWIN1_DADR, 0x00000000); -} - -static int __init emma2rh_pci_setup(void) -{ - emma2rh_pci_init(); - register_pci_controller(&emma2rh_pci_controller); - return 0; -} - -arch_initcall(emma2rh_pci_setup); diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c deleted file mode 100644 index 47f4ee6bbb3b..000000000000 --- a/arch/mips/pci/pci-lasat.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000, 2001, 04 Keith M Wesolowski - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/types.h> - -#include <asm/lasat/lasat.h> - -#include <irq.h> - -extern struct pci_ops nile4_pci_ops; -extern struct pci_ops gt64xxx_pci0_ops; -static struct resource lasat_pci_mem_resource = { - .name = "LASAT PCI MEM", - .start = 0x18000000, - .end = 0x19ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct resource lasat_pci_io_resource = { - .name = "LASAT PCI IO", - .start = 0x1a000000, - .end = 0x1bffffff, - .flags = IORESOURCE_IO, -}; - -static struct pci_controller lasat_pci_controller = { - .mem_resource = &lasat_pci_mem_resource, - .io_resource = &lasat_pci_io_resource, -}; - -static int __init lasat_pci_setup(void) -{ - printk(KERN_DEBUG "PCI: starting\n"); - - if (IS_LASAT_200()) - lasat_pci_controller.pci_ops = &nile4_pci_ops; - else - lasat_pci_controller.pci_ops = >64xxx_pci0_ops; - - register_pci_controller(&lasat_pci_controller); - - return 0; -} - -arch_initcall(lasat_pci_setup); - -#define LASAT_IRQ_ETH1 (LASAT_IRQ_BASE + 0) -#define LASAT_IRQ_ETH0 (LASAT_IRQ_BASE + 1) -#define LASAT_IRQ_HDC (LASAT_IRQ_BASE + 2) -#define LASAT_IRQ_COMP (LASAT_IRQ_BASE + 3) -#define LASAT_IRQ_HDLC (LASAT_IRQ_BASE + 4) -#define LASAT_IRQ_PCIA (LASAT_IRQ_BASE + 5) -#define LASAT_IRQ_PCIB (LASAT_IRQ_BASE + 6) -#define LASAT_IRQ_PCIC (LASAT_IRQ_BASE + 7) -#define LASAT_IRQ_PCID (LASAT_IRQ_BASE + 8) - -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - switch (slot) { - case 1: - case 2: - case 3: - return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4); - case 4: - return LASAT_IRQ_ETH1; /* Ethernet 1 (LAN 2) */ - case 5: - return LASAT_IRQ_ETH0; /* Ethernet 0 (LAN 1) */ - case 6: - return LASAT_IRQ_HDC; /* IDE controller */ - default: - return 0xff; /* Illegal */ - } - - return -1; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pic32/Platform b/arch/mips/pic32/Platform index cd2084f44507..1e92e52a137b 100644 --- a/arch/mips/pic32/Platform +++ b/arch/mips/pic32/Platform @@ -1,7 +1,6 @@ # # PIC32MZDA # -platform-$(CONFIG_PIC32MZDA) += pic32/ cflags-$(CONFIG_PIC32MZDA) += -I$(srctree)/arch/mips/include/asm/mach-pic32 load-$(CONFIG_PIC32MZDA) += 0xffffffff88000000 all-$(CONFIG_PIC32MZDA) := $(COMPRESSION_FNAME).bin diff --git a/arch/mips/pistachio/Platform b/arch/mips/pistachio/Platform index c3592b374ad2..f73a1a929965 100644 --- a/arch/mips/pistachio/Platform +++ b/arch/mips/pistachio/Platform @@ -1,7 +1,6 @@ # # IMG Pistachio SoC # -platform-$(CONFIG_MACH_PISTACHIO) += pistachio/ cflags-$(CONFIG_MACH_PISTACHIO) += \ -I$(srctree)/arch/mips/include/asm/mach-pistachio load-$(CONFIG_MACH_PISTACHIO) += 0xffffffff80400000 diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c index a09a5da38e6b..558995ed6fe8 100644 --- a/arch/mips/pistachio/init.c +++ b/arch/mips/pistachio/init.c @@ -83,12 +83,12 @@ phys_addr_t mips_cdmm_phys_base(void) static void __init mips_nmi_setup(void) { void *base; - extern char except_vec_nmi; + extern char except_vec_nmi[]; base = cpu_has_veic ? (void *)(CAC_BASE + 0xa80) : (void *)(CAC_BASE + 0x380); - memcpy(base, &except_vec_nmi, 0x80); + memcpy(base, except_vec_nmi, 0x80); flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); } @@ -96,12 +96,12 @@ static void __init mips_nmi_setup(void) static void __init mips_ejtag_setup(void) { void *base; - extern char except_vec_ejtag_debug; + extern char except_vec_ejtag_debug[]; base = cpu_has_veic ? (void *)(CAC_BASE + 0xa00) : (void *)(CAC_BASE + 0x300); - memcpy(base, &except_vec_ejtag_debug, 0x80); + memcpy(base, except_vec_ejtag_debug, 0x80); flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); } diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig deleted file mode 100644 index b185b7620c97..000000000000 --- a/arch/mips/pmcs-msp71xx/Kconfig +++ /dev/null @@ -1,50 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -choice - prompt "PMC-Sierra MSP SOC type" - depends on PMC_MSP - -config PMC_MSP4200_EVAL - bool "PMC-Sierra MSP4200 Eval Board" - select IRQ_MSP_SLP - select HAVE_PCI - select MIPS_L1_CACHE_SHIFT_4 - -config PMC_MSP4200_GW - bool "PMC-Sierra MSP4200 VoIP Gateway" - select IRQ_MSP_SLP - select HAVE_PCI - -config PMC_MSP7120_EVAL - bool "PMC-Sierra MSP7120 Eval Board" - select SYS_SUPPORTS_MULTITHREADING - select IRQ_MSP_CIC - select HAVE_PCI - -config PMC_MSP7120_GW - bool "PMC-Sierra MSP7120 Residential Gateway" - select SYS_SUPPORTS_MULTITHREADING - select IRQ_MSP_CIC - select HAVE_PCI - select MSP_HAS_USB - select MSP_ETH - -config PMC_MSP7120_FPGA - bool "PMC-Sierra MSP7120 FPGA" - select SYS_SUPPORTS_MULTITHREADING - select IRQ_MSP_CIC - select HAVE_PCI - -endchoice - -config MSP_HAS_USB - bool - depends on PMC_MSP - -config MSP_ETH - bool - select MSP_HAS_MAC - depends on PMC_MSP - -config MSP_HAS_MAC - bool - depends on PMC_MSP diff --git a/arch/mips/pmcs-msp71xx/Makefile b/arch/mips/pmcs-msp71xx/Makefile deleted file mode 100644 index c040bd6ed62d..000000000000 --- a/arch/mips/pmcs-msp71xx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the PMC-Sierra MSP SOCs -# -obj-y += msp_prom.o msp_setup.o msp_irq.o \ - msp_time.o msp_serial.o msp_elb.o -obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o -obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o -obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o -obj-$(CONFIG_PCI) += msp_pci.o -obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o -obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o -obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o diff --git a/arch/mips/pmcs-msp71xx/Platform b/arch/mips/pmcs-msp71xx/Platform deleted file mode 100644 index 7af0734a5007..000000000000 --- a/arch/mips/pmcs-msp71xx/Platform +++ /dev/null @@ -1,7 +0,0 @@ -# -# PMC-Sierra MSP SOCs -# -platform-$(CONFIG_PMC_MSP) += pmcs-msp71xx/ -cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/mach-pmcs-msp71xx \ - -mno-branch-likely -load-$(CONFIG_PMC_MSP) += 0xffffffff80100000 diff --git a/arch/mips/pmcs-msp71xx/msp_elb.c b/arch/mips/pmcs-msp71xx/msp_elb.c deleted file mode 100644 index 3e9641007216..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_elb.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Sets up the proper Chip Select configuration registers. It is assumed that - * PMON sets up the ADDR and MASK registers properly. - * - * Copyright 2005-2006 PMC-Sierra, Inc. - * Author: Marc St-Jean, Marc_St-Jean@pmc-sierra.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <msp_regs.h> - -static int __init msp_elb_setup(void) -{ -#if defined(CONFIG_PMC_MSP7120_GW) \ - || defined(CONFIG_PMC_MSP7120_EVAL) - /* - * Force all CNFG to be identical and equal to CS0, - * according to OPS doc - */ - *CS1_CNFG_REG = *CS2_CNFG_REG = *CS3_CNFG_REG = *CS0_CNFG_REG; -#endif - return 0; -} - -subsys_initcall(msp_elb_setup); diff --git a/arch/mips/pmcs-msp71xx/msp_eth.c b/arch/mips/pmcs-msp71xx/msp_eth.c deleted file mode 100644 index 15679b427f44..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_eth.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * The setup file for ethernet related hardware on PMC-Sierra MSP processors. - * - * Copyright 2010 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <msp_regs.h> -#include <msp_int.h> -#include <msp_gpio_macros.h> - - -#define MSP_ETHERNET_GPIO0 14 -#define MSP_ETHERNET_GPIO1 15 -#define MSP_ETHERNET_GPIO2 16 - -#define MSP_ETH_ID "pmc_mspeth" -#define MSP_ETH_SIZE 0xE0 -static struct resource msp_eth0_resources[] = { - [0] = { - .start = MSP_MAC0_BASE, - .end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSP_INT_MAC0, - .end = MSP_INT_MAC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource msp_eth1_resources[] = { - [0] = { - .start = MSP_MAC1_BASE, - .end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSP_INT_MAC1, - .end = MSP_INT_MAC1, - .flags = IORESOURCE_IRQ, - }, -}; - - - -static struct platform_device mspeth_device[] = { - [0] = { - .name = MSP_ETH_ID, - .id = 0, - .num_resources = ARRAY_SIZE(msp_eth0_resources), - .resource = msp_eth0_resources, - }, - [1] = { - .name = MSP_ETH_ID, - .id = 1, - .num_resources = ARRAY_SIZE(msp_eth1_resources), - .resource = msp_eth1_resources, - }, - -}; -#define msp_eth_devs mspeth_device - -int __init msp_eth_setup(void) -{ - int i, ret = 0; - - /* Configure the GPIO and take the ethernet PHY out of reset */ - msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0); - msp_gpio_pin_hi(MSP_ETHERNET_GPIO0); - - for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) { - ret = platform_device_register(&msp_eth_devs[i]); - printk(KERN_INFO "device: %d, return value = %d\n", i, ret); - if (ret) { - platform_device_unregister(&msp_eth_devs[i]); - break; - } - } - - if (ret) - printk(KERN_WARNING "Could not initialize " - "MSPETH device structures.\n"); - - return ret; -} -subsys_initcall(msp_eth_setup); diff --git a/arch/mips/pmcs-msp71xx/msp_hwbutton.c b/arch/mips/pmcs-msp71xx/msp_hwbutton.c deleted file mode 100644 index bb57ed9ea2bd..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_hwbutton.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Sets up interrupt handlers for various hardware switches which are - * connected to interrupt lines. - * - * Copyright 2005-2207 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <msp_int.h> -#include <msp_regs.h> -#include <msp_regops.h> - -/* For hwbutton_interrupt->initial_state */ -#define HWBUTTON_HI 0x1 -#define HWBUTTON_LO 0x2 - -/* - * This struct describes a hardware button - */ -struct hwbutton_interrupt { - char *name; /* Name of button */ - int irq; /* Actual LINUX IRQ */ - int eirq; /* Extended IRQ number (0-7) */ - int initial_state; /* The "normal" state of the switch */ - void (*handle_hi)(void *); /* Handler: switch input has gone HI */ - void (*handle_lo)(void *); /* Handler: switch input has gone LO */ - void *data; /* Optional data to pass to handler */ -}; - -#ifdef CONFIG_PMC_MSP7120_GW -extern void msp_restart(char *); - -static void softreset_push(void *data) -{ - printk(KERN_WARNING "SOFTRESET switch was pushed\n"); - - /* - * In the future you could move this to the release handler, - * timing the difference between the 'push' and 'release', and only - * doing this ungraceful restart if the button has been down for - * a certain amount of time; otherwise doing a graceful restart. - */ - - msp_restart(NULL); -} - -static void softreset_release(void *data) -{ - printk(KERN_WARNING "SOFTRESET switch was released\n"); - - /* Do nothing */ -} - -static void standby_on(void *data) -{ - printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n"); - - /* TODO: Put board in standby mode */ -} - -static void standby_off(void *data) -{ - printk(KERN_WARNING - "STANDBY switch was set to OFF (not implemented)\n"); - - /* TODO: Take out of standby mode */ -} - -static struct hwbutton_interrupt softreset_sw = { - .name = "Softreset button", - .irq = MSP_INT_EXT0, - .eirq = 0, - .initial_state = HWBUTTON_HI, - .handle_hi = softreset_release, - .handle_lo = softreset_push, - .data = NULL, -}; - -static struct hwbutton_interrupt standby_sw = { - .name = "Standby switch", - .irq = MSP_INT_EXT1, - .eirq = 1, - .initial_state = HWBUTTON_HI, - .handle_hi = standby_off, - .handle_lo = standby_on, - .data = NULL, -}; -#endif /* CONFIG_PMC_MSP7120_GW */ - -static irqreturn_t hwbutton_handler(int irq, void *data) -{ - struct hwbutton_interrupt *hirq = data; - unsigned long cic_ext = *CIC_EXT_CFG_REG; - - if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) { - /* Interrupt: pin is now HI */ - CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq); - hirq->handle_hi(hirq->data); - } else { - /* Interrupt: pin is now LO */ - CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq); - hirq->handle_lo(hirq->data); - } - - /* - * Invert the POLARITY of this level interrupt to ack the interrupt - * Thus next state change will invoke the opposite message - */ - *CIC_EXT_CFG_REG = cic_ext; - - return IRQ_HANDLED; -} - -static int msp_hwbutton_register(struct hwbutton_interrupt *hirq) -{ - unsigned long cic_ext; - - if (hirq->handle_hi == NULL || hirq->handle_lo == NULL) - return -EINVAL; - - cic_ext = *CIC_EXT_CFG_REG; - CIC_EXT_SET_TRIGGER_LEVEL(cic_ext, hirq->eirq); - if (hirq->initial_state == HWBUTTON_HI) - CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq); - else - CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq); - *CIC_EXT_CFG_REG = cic_ext; - - return request_irq(hirq->irq, hwbutton_handler, 0, - hirq->name, hirq); -} - -static int __init msp_hwbutton_setup(void) -{ -#ifdef CONFIG_PMC_MSP7120_GW - msp_hwbutton_register(&softreset_sw); - msp_hwbutton_register(&standby_sw); -#endif - return 0; -} - -subsys_initcall(msp_hwbutton_setup); diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c deleted file mode 100644 index d525cc931d89..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_irq.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * IRQ vector handles - * - * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/time.h> - -#include <asm/irq_cpu.h> -#include <asm/setup.h> - -#include <msp_int.h> - -/* SLP bases systems */ -extern void msp_slp_irq_init(void); -extern void msp_slp_irq_dispatch(void); - -/* CIC based systems */ -extern void msp_cic_irq_init(void); -extern void msp_cic_irq_dispatch(void); - -/* VSMP support init */ -extern void msp_vsmp_int_init(void); - -/* vectored interrupt implementation */ - -/* SW0/1 interrupts are used for SMP */ -static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); } -static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); } -static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); } -static inline void usb_int_dispatch(void) { do_IRQ(MSP_INT_USB); } -static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); } - -/* - * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded - * hierarchical system. The first level are the direct MIPS interrupts - * and are assigned the interrupt range 0-7. The second level is the SLM - * interrupt controller and is assigned the range 8-39. The third level - * comprises the Peripherial block, the PCI block, the PCI MSI block and - * the SLP. The PCI interrupts and the SLP errors are handled by the - * relevant subsystems so the core interrupt code needs only concern - * itself with the Peripheral block. These are assigned interrupts in - * the range 40-71. - */ - -asmlinkage void plat_irq_dispatch(void) -{ - u32 pending; - - pending = read_c0_status() & read_c0_cause(); - - /* - * jump to the correct interrupt routine - * These are arranged in priority order and the timer - * comes first! - */ - -#ifdef CONFIG_IRQ_MSP_CIC /* break out the CIC stuff for now */ - if (pending & C_IRQ4) /* do the peripherals first, that's the timer */ - msp_cic_irq_dispatch(); - - else if (pending & C_IRQ0) - do_IRQ(MSP_INT_MAC0); - - else if (pending & C_IRQ1) - do_IRQ(MSP_INT_MAC1); - - else if (pending & C_IRQ2) - do_IRQ(MSP_INT_USB); - - else if (pending & C_IRQ3) - do_IRQ(MSP_INT_SAR); - - else if (pending & C_IRQ5) - do_IRQ(MSP_INT_SEC); - -#else - if (pending & C_IRQ5) - do_IRQ(MSP_INT_TIMER); - - else if (pending & C_IRQ0) - do_IRQ(MSP_INT_MAC0); - - else if (pending & C_IRQ1) - do_IRQ(MSP_INT_MAC1); - - else if (pending & C_IRQ3) - do_IRQ(MSP_INT_VE); - - else if (pending & C_IRQ4) - msp_slp_irq_dispatch(); -#endif - - else if (pending & C_SW0) /* do software after hardware */ - do_IRQ(MSP_INT_SW0); - - else if (pending & C_SW1) - do_IRQ(MSP_INT_SW1); -} - -void __init arch_init_irq(void) -{ - /* assume we'll be using vectored interrupt mode except in UP mode*/ -#ifdef CONFIG_MIPS_MT - BUG_ON(!cpu_has_vint); -#endif - /* initialize the 1st-level CPU based interrupt controller */ - mips_cpu_irq_init(); - -#ifdef CONFIG_IRQ_MSP_CIC - msp_cic_irq_init(); -#ifdef CONFIG_MIPS_MT - set_vi_handler(MSP_INT_CIC, msp_cic_irq_dispatch); - set_vi_handler(MSP_INT_MAC0, mac0_int_dispatch); - set_vi_handler(MSP_INT_MAC1, mac1_int_dispatch); - set_vi_handler(MSP_INT_SAR, mac2_int_dispatch); - set_vi_handler(MSP_INT_USB, usb_int_dispatch); - set_vi_handler(MSP_INT_SEC, sec_int_dispatch); -#ifdef CONFIG_MIPS_MT_SMP - msp_vsmp_int_init(); -#endif /* CONFIG_MIPS_MT_SMP */ -#endif /* CONFIG_MIPS_MT */ - /* setup the cascaded interrupts */ - if (request_irq(MSP_INT_CIC, no_action, IRQF_NO_THREAD, - "MSP CIC cascade", NULL)) - pr_err("Failed to register MSP CIC cascade interrupt\n"); - if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD, - "MSP PER cascade", NULL)) - pr_err("Failed to register MSP PER cascade interrupt\n"); - -#else - /* - * Setup the 2nd-level SLP register based interrupt controller. - * VSMP support support is not enabled for SLP. - */ - msp_slp_irq_init(); - - /* setup the cascaded SLP/PER interrupts */ - if (request_irq(MSP_INT_SLP, no_action, IRQF_NO_THREAD, - "MSP CIC cascade", NULL)) - pr_err("Failed to register MSP CIC cascade interrupt\n"); - if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD, - "MSP PER cascade", NULL)) - pr_err("Failed to register MSP PER cascade interrupt\n"); -#endif -} diff --git a/arch/mips/pmcs-msp71xx/msp_irq_cic.c b/arch/mips/pmcs-msp71xx/msp_irq_cic.c deleted file mode 100644 index 0706010cc99f..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_irq_cic.c +++ /dev/null @@ -1,208 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c - * - * This file define the irq handler for MSP CIC subsystem interrupts. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/bitops.h> -#include <linux/irq.h> - -#include <asm/mipsregs.h> - -#include <msp_cic_int.h> -#include <msp_regs.h> - -/* - * External API - */ -extern void msp_per_irq_init(void); -extern void msp_per_irq_dispatch(void); - - -/* - * Convenience Macro. Should be somewhere generic. - */ -#define get_current_vpe() \ - ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) - -#ifdef CONFIG_SMP - -#define LOCK_VPE(flags, mtflags) \ -do { \ - local_irq_save(flags); \ - mtflags = dmt(); \ -} while (0) - -#define UNLOCK_VPE(flags, mtflags) \ -do { \ - emt(mtflags); \ - local_irq_restore(flags);\ -} while (0) - -#define LOCK_CORE(flags, mtflags) \ -do { \ - local_irq_save(flags); \ - mtflags = dvpe(); \ -} while (0) - -#define UNLOCK_CORE(flags, mtflags) \ -do { \ - evpe(mtflags); \ - local_irq_restore(flags);\ -} while (0) - -#else - -#define LOCK_VPE(flags, mtflags) -#define UNLOCK_VPE(flags, mtflags) -#endif - -/* ensure writes to cic are completed */ -static inline void cic_wmb(void) -{ - const volatile void __iomem *cic_mem = CIC_VPE0_MSK_REG; - volatile u32 dummy_read; - - wmb(); - dummy_read = __raw_readl(cic_mem); - dummy_read++; -} - -static void unmask_cic_irq(struct irq_data *d) -{ - volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG; - int vpe; -#ifdef CONFIG_SMP - unsigned int mtflags; - unsigned long flags; - - /* - * Make sure we have IRQ affinity. It may have changed while - * we were processing the IRQ. - */ - if (!cpumask_test_cpu(smp_processor_id(), - irq_data_get_affinity_mask(d))) - return; -#endif - - vpe = get_current_vpe(); - LOCK_VPE(flags, mtflags); - cic_msk_reg[vpe] |= (1 << (d->irq - MSP_CIC_INTBASE)); - UNLOCK_VPE(flags, mtflags); - cic_wmb(); -} - -static void mask_cic_irq(struct irq_data *d) -{ - volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG; - int vpe = get_current_vpe(); -#ifdef CONFIG_SMP - unsigned long flags, mtflags; -#endif - LOCK_VPE(flags, mtflags); - cic_msk_reg[vpe] &= ~(1 << (d->irq - MSP_CIC_INTBASE)); - UNLOCK_VPE(flags, mtflags); - cic_wmb(); -} -static void msp_cic_irq_ack(struct irq_data *d) -{ - mask_cic_irq(d); - /* - * Only really necessary for 18, 16-14 and sometimes 3:0 - * (since these can be edge sensitive) but it doesn't - * hurt for the others - */ - *CIC_STS_REG = (1 << (d->irq - MSP_CIC_INTBASE)); -} - -/* Note: Limiting to VSMP. */ - -#ifdef CONFIG_MIPS_MT_SMP -static int msp_cic_irq_set_affinity(struct irq_data *d, - const struct cpumask *cpumask, bool force) -{ - int cpu; - unsigned long flags; - unsigned int mtflags; - unsigned long imask = (1 << (d->irq - MSP_CIC_INTBASE)); - volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG; - - /* timer balancing should be disabled in kernel code */ - BUG_ON(d->irq == MSP_INT_VPE0_TIMER || d->irq == MSP_INT_VPE1_TIMER); - - LOCK_CORE(flags, mtflags); - /* enable if any of each VPE's TCs require this IRQ */ - for_each_online_cpu(cpu) { - if (cpumask_test_cpu(cpu, cpumask)) - cic_mask[cpu] |= imask; - else - cic_mask[cpu] &= ~imask; - - } - - UNLOCK_CORE(flags, mtflags); - return 0; - -} -#endif - -static struct irq_chip msp_cic_irq_controller = { - .name = "MSP_CIC", - .irq_mask = mask_cic_irq, - .irq_mask_ack = msp_cic_irq_ack, - .irq_unmask = unmask_cic_irq, - .irq_ack = msp_cic_irq_ack, -#ifdef CONFIG_MIPS_MT_SMP - .irq_set_affinity = msp_cic_irq_set_affinity, -#endif -}; - -void __init msp_cic_irq_init(void) -{ - int i; - /* Mask/clear interrupts. */ - *CIC_VPE0_MSK_REG = 0x00000000; - *CIC_VPE1_MSK_REG = 0x00000000; - *CIC_STS_REG = 0xFFFFFFFF; - /* - * The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI. - * These inputs map to EXT_INT_POL[6:4] inside the CIC. - * They are to be active low, level sensitive. - */ - *CIC_EXT_CFG_REG &= 0xFFFF8F8F; - - /* initialize all the IRQ descriptors */ - for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) { - irq_set_chip_and_handler(i, &msp_cic_irq_controller, - handle_level_irq); - } - - /* Initialize the PER interrupt sub-system */ - msp_per_irq_init(); -} - -/* CIC masked by CIC vector processing before dispatch called */ -void msp_cic_irq_dispatch(void) -{ - volatile u32 *cic_msk_reg = (volatile u32 *)CIC_VPE0_MSK_REG; - u32 cic_mask; - u32 pending; - int cic_status = *CIC_STS_REG; - cic_mask = cic_msk_reg[get_current_vpe()]; - pending = cic_status & cic_mask; - if (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))) { - do_IRQ(MSP_INT_VPE0_TIMER); - } else if (pending & (1 << (MSP_INT_VPE1_TIMER - MSP_CIC_INTBASE))) { - do_IRQ(MSP_INT_VPE1_TIMER); - } else if (pending & (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) { - msp_per_irq_dispatch(); - } else if (pending) { - do_IRQ(ffs(pending) + MSP_CIC_INTBASE - 1); - } else{ - spurious_interrupt(); - } -} diff --git a/arch/mips/pmcs-msp71xx/msp_irq_per.c b/arch/mips/pmcs-msp71xx/msp_irq_per.c deleted file mode 100644 index b284412b2923..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_irq_per.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c - * - * This file define the irq handler for MSP PER subsystem interrupts. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> - -#include <asm/mipsregs.h> - -#include <msp_cic_int.h> -#include <msp_regs.h> - - -/* - * Convenience Macro. Should be somewhere generic. - */ -#define get_current_vpe() \ - ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) - -#ifdef CONFIG_SMP -/* - * The PER registers must be protected from concurrent access. - */ - -static DEFINE_SPINLOCK(per_lock); -#endif - -/* ensure writes to per are completed */ - -static inline void per_wmb(void) -{ - const volatile void __iomem *per_mem = PER_INT_MSK_REG; - volatile u32 dummy_read; - - wmb(); - dummy_read = __raw_readl(per_mem); - dummy_read++; -} - -static inline void unmask_per_irq(struct irq_data *d) -{ -#ifdef CONFIG_SMP - unsigned long flags; - spin_lock_irqsave(&per_lock, flags); - *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); - spin_unlock_irqrestore(&per_lock, flags); -#else - *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); -#endif - per_wmb(); -} - -static inline void mask_per_irq(struct irq_data *d) -{ -#ifdef CONFIG_SMP - unsigned long flags; - spin_lock_irqsave(&per_lock, flags); - *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); - spin_unlock_irqrestore(&per_lock, flags); -#else - *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); -#endif - per_wmb(); -} - -static inline void msp_per_irq_ack(struct irq_data *d) -{ - mask_per_irq(d); - /* - * In the PER interrupt controller, only bits 11 and 10 - * are write-to-clear, (SPI TX complete, SPI RX complete). - * It does nothing for any others. - */ - *PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE)); -} - -#ifdef CONFIG_SMP -static int msp_per_irq_set_affinity(struct irq_data *d, - const struct cpumask *affinity, bool force) -{ - /* WTF is this doing ????? */ - unmask_per_irq(d); - return 0; -} -#endif - -static struct irq_chip msp_per_irq_controller = { - .name = "MSP_PER", - .irq_enable = unmask_per_irq, - .irq_disable = mask_per_irq, - .irq_ack = msp_per_irq_ack, -#ifdef CONFIG_SMP - .irq_set_affinity = msp_per_irq_set_affinity, -#endif -}; - -void __init msp_per_irq_init(void) -{ - int i; - /* Mask/clear interrupts. */ - *PER_INT_MSK_REG = 0x00000000; - *PER_INT_STS_REG = 0xFFFFFFFF; - /* initialize all the IRQ descriptors */ - for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) { - irq_set_chip(i, &msp_per_irq_controller); - } -} - -void msp_per_irq_dispatch(void) -{ - u32 per_mask = *PER_INT_MSK_REG; - u32 per_status = *PER_INT_STS_REG; - u32 pending; - - pending = per_status & per_mask; - if (pending) { - do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1); - } else { - spurious_interrupt(); - } -} diff --git a/arch/mips/pmcs-msp71xx/msp_irq_slp.c b/arch/mips/pmcs-msp71xx/msp_irq_slp.c deleted file mode 100644 index 097a5fd3b06b..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_irq_slp.c +++ /dev/null @@ -1,102 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * This file define the irq handler for MSP SLM subsystem interrupts. - * - * Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c - * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/bitops.h> - -#include <asm/mipsregs.h> - -#include <msp_slp_int.h> -#include <msp_regs.h> - -static inline void unmask_msp_slp_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - /* check for PER interrupt range */ - if (irq < MSP_PER_INTBASE) - *SLP_INT_MSK_REG |= (1 << (irq - MSP_SLP_INTBASE)); - else - *PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE)); -} - -static inline void mask_msp_slp_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - /* check for PER interrupt range */ - if (irq < MSP_PER_INTBASE) - *SLP_INT_MSK_REG &= ~(1 << (irq - MSP_SLP_INTBASE)); - else - *PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE)); -} - -/* - * While we ack the interrupt interrupts are disabled and thus we don't need - * to deal with concurrency issues. Same for msp_slp_irq_end. - */ -static inline void ack_msp_slp_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - /* check for PER interrupt range */ - if (irq < MSP_PER_INTBASE) - *SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE)); - else - *PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE)); -} - -static struct irq_chip msp_slp_irq_controller = { - .name = "MSP_SLP", - .irq_ack = ack_msp_slp_irq, - .irq_mask = mask_msp_slp_irq, - .irq_unmask = unmask_msp_slp_irq, -}; - -void __init msp_slp_irq_init(void) -{ - int i; - - /* Mask/clear interrupts. */ - *SLP_INT_MSK_REG = 0x00000000; - *PER_INT_MSK_REG = 0x00000000; - *SLP_INT_STS_REG = 0xFFFFFFFF; - *PER_INT_STS_REG = 0xFFFFFFFF; - - /* initialize all the IRQ descriptors */ - for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++) - irq_set_chip_and_handler(i, &msp_slp_irq_controller, - handle_level_irq); -} - -void msp_slp_irq_dispatch(void) -{ - u32 pending; - int intbase; - - intbase = MSP_SLP_INTBASE; - pending = *SLP_INT_STS_REG & *SLP_INT_MSK_REG; - - /* check for PER interrupt */ - if (pending == (1 << (MSP_INT_PER - MSP_SLP_INTBASE))) { - intbase = MSP_PER_INTBASE; - pending = *PER_INT_STS_REG & *PER_INT_MSK_REG; - } - - /* check for spurious interrupt */ - if (pending == 0x00000000) { - printk(KERN_ERR "Spurious %s interrupt?\n", - (intbase == MSP_SLP_INTBASE) ? "SLP" : "PER"); - return; - } - - /* dispatch the irq */ - do_IRQ(ffs(pending) + intbase - 1); -} diff --git a/arch/mips/pmcs-msp71xx/msp_pci.c b/arch/mips/pmcs-msp71xx/msp_pci.c deleted file mode 100644 index 428dea23c35c..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_pci.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * The setup file for PCI related hardware on PMC-Sierra MSP processors. - * - * Copyright 2005-2006 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> - -#include <msp_prom.h> -#include <msp_regs.h> - -extern void msp_pci_init(void); - -static int __init msp_pci_setup(void) -{ -#if 0 /* Linux 2.6 initialization code to be completed */ - if (getdeviceid() & DEV_ID_SINGLE_PC) { - /* If single card mode */ - slmRegs *sreg = (slmRegs *) SREG_BASE; - - sreg->single_pc_enable = SINGLE_PCCARD; - } -#endif - - msp_pci_init(); - - return 0; -} - -subsys_initcall(msp_pci_setup); diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c deleted file mode 100644 index 800a21b8b8b0..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_prom.c +++ /dev/null @@ -1,513 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * PROM library initialisation code, assuming a version of - * pmon is the boot code. - * - * Copyright 2000,2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/xx files. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/slab.h> - -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm-generic/sections.h> -#include <asm/page.h> - -#include <msp_prom.h> -#include <msp_regs.h> - -/* global PROM environment variables and pointers */ -int prom_argc; -char **prom_argv, **prom_envp; -int *prom_vec; - -/* debug flag */ -int init_debug = 1; - -/* memory blocks */ -struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; - -#define MAX_PROM_MEM 5 -static phys_addr_t prom_mem_base[MAX_PROM_MEM] __initdata; -static phys_addr_t prom_mem_size[MAX_PROM_MEM] __initdata; -static unsigned int nr_prom_mem __initdata; - -/* default feature sets */ -static char msp_default_features[] = -#if defined(CONFIG_PMC_MSP4200_EVAL) \ - || defined(CONFIG_PMC_MSP4200_GW) - "ERER"; -#elif defined(CONFIG_PMC_MSP7120_EVAL) \ - || defined(CONFIG_PMC_MSP7120_GW) - "EMEMSP"; -#elif defined(CONFIG_PMC_MSP7120_FPGA) - "EMEM"; -#endif - -/* conversion functions */ -static inline unsigned char str2hexnum(unsigned char c) -{ - if (c >= '0' && c <= '9') - return c - '0'; - if (c >= 'a' && c <= 'f') - return c - 'a' + 10; - return 0; /* foo */ -} - -int str2eaddr(unsigned char *ea, unsigned char *str) -{ - int index = 0; - unsigned char num = 0; - - while (*str != '\0') { - if ((*str == '.') || (*str == ':')) { - ea[index++] = num; - num = 0; - str++; - } else { - num = num << 4; - num |= str2hexnum(*str++); - } - } - - if (index == 5) { - ea[index++] = num; - return 0; - } else - return -1; -} -EXPORT_SYMBOL(str2eaddr); - -static inline unsigned long str2hex(unsigned char *str) -{ - int value = 0; - - while (*str) { - value = value << 4; - value |= str2hexnum(*str++); - } - - return value; -} - -/* function to query the system information */ -const char *get_system_type(void) -{ -#if defined(CONFIG_PMC_MSP4200_EVAL) - return "PMC-Sierra MSP4200 Eval Board"; -#elif defined(CONFIG_PMC_MSP4200_GW) - return "PMC-Sierra MSP4200 VoIP Gateway"; -#elif defined(CONFIG_PMC_MSP7120_EVAL) - return "PMC-Sierra MSP7120 Eval Board"; -#elif defined(CONFIG_PMC_MSP7120_GW) - return "PMC-Sierra MSP7120 Residential Gateway"; -#elif defined(CONFIG_PMC_MSP7120_FPGA) - return "PMC-Sierra MSP7120 FPGA"; -#else - #error "What is the type of *your* MSP?" -#endif -} - -int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv(ethaddr_name); - if (!ethaddr_str) { - printk(KERN_WARNING "%s not set in boot prom\n", ethaddr_name); - return -1; - } - - if (str2eaddr(ethernet_addr, ethaddr_str) == -1) { - printk(KERN_WARNING "%s badly formatted-<%s>\n", - ethaddr_name, ethaddr_str); - return -1; - } - - if (init_debug > 1) { - int i; - printk(KERN_DEBUG "get_ethernet_addr: for %s ", ethaddr_name); - for (i = 0; i < 5; i++) - printk(KERN_DEBUG "%02x:", - (unsigned char)*(ethernet_addr+i)); - printk(KERN_DEBUG "%02x\n", *(ethernet_addr+i)); - } - - return 0; -} -EXPORT_SYMBOL(get_ethernet_addr); - -static char *get_features(void) -{ - char *feature = prom_getenv(FEATURES); - - if (feature == NULL) { - /* default features based on MACHINE_TYPE */ - feature = msp_default_features; - } - - return feature; -} - -static char test_feature(char c) -{ - char *feature = get_features(); - - while (*feature) { - if (*feature++ == c) - return *feature; - feature++; - } - - return FEATURE_NOEXIST; -} - -unsigned long get_deviceid(void) -{ - char *deviceid = prom_getenv(DEVICEID); - - if (deviceid == NULL) - return *DEV_ID_REG; - else - return str2hex(deviceid); -} - -char identify_pci(void) -{ - return test_feature(PCI_KEY); -} -EXPORT_SYMBOL(identify_pci); - -char identify_pcimux(void) -{ - return test_feature(PCIMUX_KEY); -} - -char identify_sec(void) -{ - return test_feature(SEC_KEY); -} -EXPORT_SYMBOL(identify_sec); - -char identify_spad(void) -{ - return test_feature(SPAD_KEY); -} -EXPORT_SYMBOL(identify_spad); - -char identify_tdm(void) -{ - return test_feature(TDM_KEY); -} -EXPORT_SYMBOL(identify_tdm); - -char identify_zsp(void) -{ - return test_feature(ZSP_KEY); -} -EXPORT_SYMBOL(identify_zsp); - -static char identify_enetfeature(char key, unsigned long interface_num) -{ - char *feature = get_features(); - - while (*feature) { - if (*feature++ == key && interface_num-- == 0) - return *feature; - feature++; - } - - return FEATURE_NOEXIST; -} - -char identify_enet(unsigned long interface_num) -{ - return identify_enetfeature(ENET_KEY, interface_num); -} -EXPORT_SYMBOL(identify_enet); - -char identify_enetTxD(unsigned long interface_num) -{ - return identify_enetfeature(ENETTXD_KEY, interface_num); -} -EXPORT_SYMBOL(identify_enetTxD); - -unsigned long identify_family(void) -{ - unsigned long deviceid; - - deviceid = get_deviceid(); - - return deviceid & CPU_DEVID_FAMILY; -} -EXPORT_SYMBOL(identify_family); - -unsigned long identify_revision(void) -{ - unsigned long deviceid; - - deviceid = get_deviceid(); - - return deviceid & CPU_DEVID_REVISION; -} -EXPORT_SYMBOL(identify_revision); - -/* PROM environment functions */ -char *prom_getenv(char *env_name) -{ - /* - * Return a pointer to the given environment variable. prom_envp - * points to a null terminated array of pointers to variables. - * Environment variables are stored in the form of "memsize=64" - */ - - char **var = prom_envp; - int i = strlen(env_name); - - while (*var) { - if (strncmp(env_name, *var, i) == 0) { - return *var + strlen(env_name) + 1; - } - var++; - } - - return NULL; -} - -/* PROM commandline functions */ -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while (actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; -} - -/* memory allocation functions */ -static int __init prom_memtype_classify(unsigned int type) -{ - switch (type) { - case yamon_free: - return BOOT_MEM_RAM; - case yamon_prom: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - -void __init prom_meminit(void) -{ - struct prom_pmemblock *p; - - p = prom_getmdesc(); - - while (p->size) { - long type; - unsigned long base, size; - - type = prom_memtype_classify(p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - - if (type == BOOT_MEM_ROM_DATA) { - if (nr_prom_mem >= MAX_PROM_MEM) { - pr_err("Too many ROM DATA regions"); - continue; - } - prom_mem_base[nr_prom_mem] = base; - prom_mem_size[nr_prom_mem] = size; - nr_prom_mem++; - } - } -} - -void __init prom_free_prom_memory(void) -{ - int argc; - char **argv; - char **envp; - char *ptr; - int len = 0; - int i; - - /* - * preserve environment variables and command line from pmon/bbload - * first preserve the command line - */ - for (argc = 0; argc < prom_argc; argc++) { - len += sizeof(char *); /* length of pointer */ - len += strlen(prom_argv[argc]) + 1; /* length of string */ - } - len += sizeof(char *); /* plus length of null pointer */ - - argv = kmalloc(len, GFP_KERNEL); - ptr = (char *) &argv[prom_argc + 1]; /* strings follow array */ - - for (argc = 0; argc < prom_argc; argc++) { - argv[argc] = ptr; - strcpy(ptr, prom_argv[argc]); - ptr += strlen(prom_argv[argc]) + 1; - } - argv[prom_argc] = NULL; /* end array with null pointer */ - prom_argv = argv; - - /* next preserve the environment variables */ - len = 0; - i = 0; - for (envp = prom_envp; *envp != NULL; envp++) { - i++; /* count number of environment variables */ - len += sizeof(char *); /* length of pointer */ - len += strlen(*envp) + 1; /* length of string */ - } - len += sizeof(char *); /* plus length of null pointer */ - - envp = kmalloc(len, GFP_KERNEL); - ptr = (char *) &envp[i+1]; - - for (argc = 0; argc < i; argc++) { - envp[argc] = ptr; - strcpy(ptr, prom_envp[argc]); - ptr += strlen(prom_envp[argc]) + 1; - } - envp[i] = NULL; /* end array with null pointer */ - prom_envp = envp; - - for (i = 0; i < nr_prom_mem; i++) { - free_init_pages("prom memory", - prom_mem_base[i], prom_mem_base[i] + prom_mem_size[i]); - } -} - -struct prom_pmemblock *__init prom_getmdesc(void) -{ - static char memsz_env[] __initdata = "memsize"; - static char heaptop_env[] __initdata = "heaptop"; - char *str; - unsigned int memsize; - unsigned int heaptop; - int i; - - str = prom_getenv(memsz_env); - if (!str) { - ppfinit("memsize not set in boot prom, " - "set to default (32Mb)\n"); - memsize = 0x02000000; - } else { - memsize = simple_strtol(str, NULL, 0); - - if (memsize == 0) { - /* if memsize is a bad size, use reasonable default */ - memsize = 0x02000000; - } - - /* convert to physical address (removing caching bits, etc) */ - memsize = CPHYSADDR(memsize); - } - - str = prom_getenv(heaptop_env); - if (!str) { - heaptop = CPHYSADDR((u32)&_text); - ppfinit("heaptop not set in boot prom, " - "set to default 0x%08x\n", heaptop); - } else { - heaptop = simple_strtol(str, NULL, 16); - if (heaptop == 0) { - /* heaptop conversion bad, might have 0xValue */ - heaptop = simple_strtol(str, NULL, 0); - - if (heaptop == 0) { - /* heaptop still bad, use reasonable default */ - heaptop = CPHYSADDR((u32)&_text); - } - } - - /* convert to physical address (removing caching bits, etc) */ - heaptop = CPHYSADDR((u32)heaptop); - } - - /* the base region */ - i = 0; - mdesc[i].type = BOOT_MEM_RESERVED; - mdesc[i].base = 0x00000000; - mdesc[i].size = PAGE_ALIGN(0x300 + 0x80); - /* jtag interrupt vector + sizeof vector */ - - /* PMON data */ - if (heaptop > mdesc[i].base + mdesc[i].size) { - i++; /* 1 */ - mdesc[i].type = BOOT_MEM_ROM_DATA; - mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size; - mdesc[i].size = heaptop - mdesc[i].base; - } - - /* end of PMON data to start of kernel -- probably zero .. */ - if (heaptop != CPHYSADDR((u32)_text)) { - i++; /* 2 */ - mdesc[i].type = BOOT_MEM_RAM; - mdesc[i].base = heaptop; - mdesc[i].size = CPHYSADDR((u32)_text) - mdesc[i].base; - } - - /* kernel proper */ - i++; /* 3 */ - mdesc[i].type = BOOT_MEM_RESERVED; - mdesc[i].base = CPHYSADDR((u32)_text); - mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base; - - /* Remainder of RAM -- under memsize */ - i++; /* 5 */ - mdesc[i].type = yamon_free; - mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size; - mdesc[i].size = memsize - mdesc[i].base; - - return &mdesc[0]; -} diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c deleted file mode 100644 index 940c684f6921..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_serial.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * The setup file for serial related hardware on PMC-Sierra MSP processors. - * - * Copyright 2005 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/serial_reg.h> -#include <linux/slab.h> - -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/serial.h> -#include <linux/serial_8250.h> - -#include <msp_prom.h> -#include <msp_int.h> -#include <msp_regs.h> - -struct msp_uart_data { - int last_lcr; -}; - -static void msp_serial_out(struct uart_port *p, int offset, int value) -{ - struct msp_uart_data *d = p->private_data; - - if (offset == UART_LCR) - d->last_lcr = value; - - offset <<= p->regshift; - writeb(value, p->membase + offset); -} - -static unsigned int msp_serial_in(struct uart_port *p, int offset) -{ - offset <<= p->regshift; - - return readb(p->membase + offset); -} - -static int msp_serial_handle_irq(struct uart_port *p) -{ - struct msp_uart_data *d = p->private_data; - unsigned int iir = readb(p->membase + (UART_IIR << p->regshift)); - - if (serial8250_handle_irq(p, iir)) { - return 1; - } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) { - /* - * The DesignWare APB UART has an Busy Detect (0x07) interrupt - * meaning an LCR write attempt occurred while the UART was - * busy. The interrupt must be cleared by reading the UART - * status register (USR) and the LCR re-written. - * - * Note: MSP reserves 0x20 bytes of address space for the UART - * and the USR is mapped in a separate block at an offset of - * 0xc0 from the start of the UART. - */ - (void)readb(p->membase + 0xc0); - writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift)); - - return 1; - } - - return 0; -} - -void __init msp_serial_setup(void) -{ - char *s; - char *endp; - struct uart_port up; - unsigned int uartclk; - - memset(&up, 0, sizeof(up)); - - /* Check if clock was specified in environment */ - s = prom_getenv("uartfreqhz"); - if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0)) - uartclk = MSP_BASE_BAUD; - ppfinit("UART clock set to %d\n", uartclk); - - /* Initialize first serial port */ - up.mapbase = MSP_UART0_BASE; - up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN); - up.irq = MSP_INT_UART0; - up.uartclk = uartclk; - up.regshift = 2; - up.iotype = UPIO_MEM; - up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - up.type = PORT_16550A; - up.line = 0; - up.serial_out = msp_serial_out; - up.serial_in = msp_serial_in; - up.handle_irq = msp_serial_handle_irq; - up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL); - if (!up.private_data) { - pr_err("failed to allocate uart private data\n"); - return; - } - if (early_serial_setup(&up)) { - kfree(up.private_data); - pr_err("Early serial init of port 0 failed\n"); - } - - /* Initialize the second serial port, if one exists */ - switch (mips_machtype) { - case MACH_MSP4200_EVAL: - case MACH_MSP4200_GW: - case MACH_MSP4200_FPGA: - case MACH_MSP7120_EVAL: - case MACH_MSP7120_GW: - case MACH_MSP7120_FPGA: - /* Enable UART1 on MSP4200 and MSP7120 */ - *GPIO_CFG2_REG = 0x00002299; - break; - - default: - return; /* No second serial port, good-bye. */ - } - - up.mapbase = MSP_UART1_BASE; - up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN); - up.irq = MSP_INT_UART1; - up.line = 1; - up.private_data = (void*)UART1_STATUS_REG; - if (early_serial_setup(&up)) { - kfree(up.private_data); - pr_err("Early serial init of port 1 failed\n"); - } -} diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c deleted file mode 100644 index d1e59cec116e..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_setup.c +++ /dev/null @@ -1,228 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * The generic setup file for PMC-Sierra MSP processors - * - * Copyright 2005-2007 PMC-Sierra, Inc, - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - */ - -#include <linux/delay.h> - -#include <asm/bootinfo.h> -#include <asm/cacheflush.h> -#include <asm/idle.h> -#include <asm/r4kcache.h> -#include <asm/reboot.h> -#include <asm/smp-ops.h> -#include <asm/time.h> - -#include <msp_prom.h> -#include <msp_regs.h> - -#if defined(CONFIG_PMC_MSP7120_GW) -#include <msp_regops.h> -#define MSP_BOARD_RESET_GPIO 9 -#endif - -extern void msp_serial_setup(void); - -#if defined(CONFIG_PMC_MSP7120_EVAL) || \ - defined(CONFIG_PMC_MSP7120_GW) || \ - defined(CONFIG_PMC_MSP7120_FPGA) -/* - * Performs the reset for MSP7120-based boards - */ -void msp7120_reset(void) -{ - void *start, *end, *iptr; - - /* Diasble all interrupts */ - local_irq_disable(); -#ifdef CONFIG_SYS_SUPPORTS_MULTITHREADING - dvpe(); -#endif - - /* Cache the reset code of this function */ - __asm__ __volatile__ ( - " .set push \n" - " .set arch=r4000 \n" - " la %0,startpoint \n" - " la %1,endpoint \n" - " .set pop \n" - : "=r" (start), "=r" (end) - : - ); - - for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1)); - iptr < end; iptr += L1_CACHE_BYTES) - cache_op(Fill, iptr); - - __asm__ __volatile__ ( - "startpoint: \n" - ); - - /* Put the DDRC into self-refresh mode */ - DDRC_INDIRECT_WRITE(DDRC_CTL(10), 0xb, 1 << 16); - - /* - * IMPORTANT! - * DO NOT do anything from here on out that might even - * think about fetching from RAM - i.e., don't call any - * non-inlined functions, and be VERY sure that any inline - * functions you do call do NOT access any sort of RAM - * anywhere! - */ - - /* Wait a bit for the DDRC to settle */ - mdelay(125); - -#if defined(CONFIG_PMC_MSP7120_GW) - /* - * Set GPIO 9 HI, (tied to board reset logic) - * GPIO 9 is the 4th GPIO of register 3 - * - * NOTE: We cannot use the higher-level msp_gpio_mode()/out() - * as GPIO char driver may not be enabled and it would look up - * data inRAM! - */ - set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000); - set_reg32(GPIO_DATA3_REG, 8); - - /* - * In case GPIO9 doesn't reset the board (jumper configurable!) - * fallback to device reset below. - */ -#endif - /* Set bit 1 of the MSP7120 reset register */ - *RST_SET_REG = 0x00000001; - - __asm__ __volatile__ ( - "endpoint: \n" - ); -} -#endif - -void msp_restart(char *command) -{ - printk(KERN_WARNING "Now rebooting .......\n"); - -#if defined(CONFIG_PMC_MSP7120_EVAL) || \ - defined(CONFIG_PMC_MSP7120_GW) || \ - defined(CONFIG_PMC_MSP7120_FPGA) - msp7120_reset(); -#else - /* No chip-specific reset code, just jump to the ROM reset vector */ - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - __flush_cache_all(); - write_c0_wired(0); - - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -#endif -} - -void msp_halt(void) -{ - printk(KERN_WARNING "\n** You can safely turn off the power\n"); - while (1) - /* If possible call official function to get CPU WARs */ - if (cpu_wait) - (*cpu_wait)(); - else - __asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0"); -} - -void msp_power_off(void) -{ - msp_halt(); -} - -void __init plat_mem_setup(void) -{ - _machine_restart = msp_restart; - _machine_halt = msp_halt; - pm_power_off = msp_power_off; -} - -void __init prom_init(void) -{ - unsigned long family; - unsigned long revision; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - /* - * Someday we can use this with PMON2000 to get a - * platform call prom routines for output etc. without - * having to use grody hacks. For now it's unused. - * - * struct callvectors *cv = (struct callvectors *) fw_arg3; - */ - family = identify_family(); - revision = identify_revision(); - - switch (family) { - case FAMILY_FPGA: - if (FPGA_IS_MSP4200(revision)) { - /* Old-style revision ID */ - mips_machtype = MACH_MSP4200_FPGA; - } else { - mips_machtype = MACH_MSP_OTHER; - } - break; - - case FAMILY_MSP4200: -#if defined(CONFIG_PMC_MSP4200_EVAL) - mips_machtype = MACH_MSP4200_EVAL; -#elif defined(CONFIG_PMC_MSP4200_GW) - mips_machtype = MACH_MSP4200_GW; -#else - mips_machtype = MACH_MSP_OTHER; -#endif - break; - - case FAMILY_MSP4200_FPGA: - mips_machtype = MACH_MSP4200_FPGA; - break; - - case FAMILY_MSP7100: -#if defined(CONFIG_PMC_MSP7120_EVAL) - mips_machtype = MACH_MSP7120_EVAL; -#elif defined(CONFIG_PMC_MSP7120_GW) - mips_machtype = MACH_MSP7120_GW; -#else - mips_machtype = MACH_MSP_OTHER; -#endif - break; - - case FAMILY_MSP7100_FPGA: - mips_machtype = MACH_MSP7120_FPGA; - break; - - default: - /* we don't recognize the machine */ - mips_machtype = MACH_UNKNOWN; - panic("***Bogosity factor five***, exiting"); - break; - } - - prom_init_cmdline(); - - prom_meminit(); - - /* - * Sub-system setup follows. - * Setup functions can either be called here or using the - * subsys_initcall mechanism (i.e. see msp_pci_setup). The - * order in which they are called can be changed by using the - * link order in arch/mips/pmc-sierra/msp71xx/Makefile. - * - * NOTE: Please keep sub-system specific initialization code - * in separate specific files. - */ - msp_serial_setup(); - - register_vsmp_smp_ops(); -} diff --git a/arch/mips/pmcs-msp71xx/msp_smp.c b/arch/mips/pmcs-msp71xx/msp_smp.c deleted file mode 100644 index 00092e2924ec..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_smp.c +++ /dev/null @@ -1,56 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. - * Copyright (C) 2001 Ralf Baechle - * Copyright (C) 2010 PMC-Sierra, Inc. - * - * VSMP support for MSP platforms . Derived from malta vsmp support. - */ -#include <linux/smp.h> -#include <linux/interrupt.h> - -#include <asm/setup.h> - -#ifdef CONFIG_MIPS_MT_SMP -#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ -#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for call */ - - -static void ipi_resched_dispatch(void) -{ - do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ); -} - -static void ipi_call_dispatch(void) -{ - do_IRQ(MIPS_CPU_IPI_CALL_IRQ); -} - -static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) -{ - return IRQ_HANDLED; -} - -static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) -{ - generic_smp_call_function_interrupt(); - - return IRQ_HANDLED; -} - -void __init arch_init_ipiirq(int irq, const char *name, irq_handler_t handler) -{ - if (request_irq(irq, handler, IRQF_PERCPU, name, NULL)) - pr_err("Failed to request irq %d (%s)\n", irq, name); - irq_set_handler(irq, handle_percpu_irq); -} - -void __init msp_vsmp_int_init(void) -{ - set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); - set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); - arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, "IPI_resched", - ipi_resched_interrupt); - arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, "IPI_call", ipi_call_interrupt); -} -#endif /* CONFIG_MIPS_MT_SMP */ diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c deleted file mode 100644 index 9c629829f447..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_time.c +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Setting up the clock on MSP SOCs. No RTC typically. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * ######################################################################## - */ - -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/ptrace.h> - -#include <asm/cevt-r4k.h> -#include <asm/mipsregs.h> -#include <asm/time.h> - -#include <msp_prom.h> -#include <msp_int.h> -#include <msp_regs.h> - -#define get_current_vpe() \ - ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) - -static int tim_installed; - -void __init plat_time_init(void) -{ - char *endp, *s; - unsigned long cpu_rate = 0; - - if (cpu_rate == 0) { - s = prom_getenv("clkfreqhz"); - cpu_rate = simple_strtoul(s, &endp, 10); - if (endp != NULL && *endp != 0) { - printk(KERN_ERR - "Clock rate in Hz parse error: %s\n", s); - cpu_rate = 0; - } - } - - if (cpu_rate == 0) { - s = prom_getenv("clkfreq"); - cpu_rate = 1000 * simple_strtoul(s, &endp, 10); - if (endp != NULL && *endp != 0) { - printk(KERN_ERR - "Clock rate in MHz parse error: %s\n", s); - cpu_rate = 0; - } - } - - if (cpu_rate == 0) { -#if defined(CONFIG_PMC_MSP7120_EVAL) \ - || defined(CONFIG_PMC_MSP7120_GW) - cpu_rate = 400000000; -#elif defined(CONFIG_PMC_MSP7120_FPGA) - cpu_rate = 25000000; -#else - cpu_rate = 150000000; -#endif - printk(KERN_ERR - "Failed to determine CPU clock rate, " - "assuming %ld hz ...\n", cpu_rate); - } - - printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate); - - /* timer frequency is 1/2 clock rate */ - mips_hpt_frequency = cpu_rate/2; -} - -unsigned int get_c0_compare_int(void) -{ - unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED; - - /* MIPS_MT modes may want timer for second VPE */ - if ((get_current_vpe()) && !tim_installed) { - if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags, - "timer", c0_compare_interrupt)) - pr_err("Failed to register timer interrupt\n"); - tim_installed++; - } - - return get_current_vpe() ? MSP_INT_VPE1_TIMER : MSP_INT_VPE0_TIMER; -} diff --git a/arch/mips/pmcs-msp71xx/msp_usb.c b/arch/mips/pmcs-msp71xx/msp_usb.c deleted file mode 100644 index d38ac70b5a2e..000000000000 --- a/arch/mips/pmcs-msp71xx/msp_usb.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * The setup file for USB related hardware on PMC-Sierra MSP processors. - * - * Copyright 2006 PMC-Sierra, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET) - -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <asm/mipsregs.h> - -#include <msp_regs.h> -#include <msp_int.h> -#include <msp_prom.h> -#include <msp_usb.h> - - -#if defined(CONFIG_USB_EHCI_HCD) -static struct resource msp_usbhost0_resources[] = { - [0] = { /* EHCI-HS operational and capabilities registers */ - .start = MSP_USB0_HS_START, - .end = MSP_USB0_HS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSP_INT_USB, - .end = MSP_INT_USB, - .flags = IORESOURCE_IRQ, - }, - [2] = { /* MSBus-to-AMBA bridge register space */ - .start = MSP_USB0_MAB_START, - .end = MSP_USB0_MAB_END, - .flags = IORESOURCE_MEM, - }, - [3] = { /* Identification and general hardware parameters */ - .start = MSP_USB0_ID_START, - .end = MSP_USB0_ID_END, - .flags = IORESOURCE_MEM, - }, -}; - -static u64 msp_usbhost0_dma_mask = 0xffffffffUL; - -static struct mspusb_device msp_usbhost0_device = { - .dev = { - .name = "pmcmsp-ehci", - .id = 0, - .dev = { - .dma_mask = &msp_usbhost0_dma_mask, - .coherent_dma_mask = 0xffffffffUL, - }, - .num_resources = ARRAY_SIZE(msp_usbhost0_resources), - .resource = msp_usbhost0_resources, - }, -}; -#endif /* CONFIG_USB_EHCI_HCD */ - -#if defined(CONFIG_USB_GADGET) -static struct resource msp_usbdev0_resources[] = { - [0] = { /* EHCI-HS operational and capabilities registers */ - .start = MSP_USB0_HS_START, - .end = MSP_USB0_HS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSP_INT_USB, - .end = MSP_INT_USB, - .flags = IORESOURCE_IRQ, - }, - [2] = { /* MSBus-to-AMBA bridge register space */ - .start = MSP_USB0_MAB_START, - .end = MSP_USB0_MAB_END, - .flags = IORESOURCE_MEM, - }, - [3] = { /* Identification and general hardware parameters */ - .start = MSP_USB0_ID_START, - .end = MSP_USB0_ID_END, - .flags = IORESOURCE_MEM, - }, -}; - -static u64 msp_usbdev_dma_mask = 0xffffffffUL; - -/* This may need to be converted to a mspusb_device, too. */ -static struct mspusb_device msp_usbdev0_device = { - .dev = { - .name = "msp71xx_udc", - .id = 0, - .dev = { - .dma_mask = &msp_usbdev_dma_mask, - .coherent_dma_mask = 0xffffffffUL, - }, - .num_resources = ARRAY_SIZE(msp_usbdev0_resources), - .resource = msp_usbdev0_resources, - }, -}; -#endif /* CONFIG_USB_GADGET */ - -static int __init msp_usb_setup(void) -{ - char *strp; - char envstr[32]; - struct platform_device *msp_devs[NUM_USB_DEVS]; - unsigned int val; - - /* construct environment name usbmode */ - /* set usbmode <host/device> as pmon environment var */ - /* - * Could this perhaps be integrated into the "features" env var? - * Use the features key "U", and follow with "H" for host-mode, - * "D" for device-mode. If it works for Ethernet, why not USB... - * -- hammtrev, 2007/03/22 - */ - snprintf(&envstr[0], sizeof(envstr), "usbmode"); - - /* set default host mode */ - val = 1; - - /* get environment string */ - strp = prom_getenv(&envstr[0]); - if (strp) { - /* compare string */ - if (!strcmp(strp, "device")) - val = 0; - } - - if (val) { -#if defined(CONFIG_USB_EHCI_HCD) - msp_devs[0] = &msp_usbhost0_device.dev; - ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name); -#else - ppfinit("%s: echi_hcd not supported\n", __FILE__); -#endif /* CONFIG_USB_EHCI_HCD */ - } else { -#if defined(CONFIG_USB_GADGET) - /* get device mode structure */ - msp_devs[0] = &msp_usbdev0_device.dev; - ppfinit("platform add USB DEVICE done %s.\n" - , msp_devs[0]->name); -#else - ppfinit("%s: usb_gadget not supported\n", __FILE__); -#endif /* CONFIG_USB_GADGET */ - } - /* add device */ - platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs)); - - return 0; -} - -subsys_initcall(msp_usb_setup); -#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */ diff --git a/arch/mips/pnx833x/Platform b/arch/mips/pnx833x/Platform index 287260669551..e5286a49fc3e 100644 --- a/arch/mips/pnx833x/Platform +++ b/arch/mips/pnx833x/Platform @@ -1,5 +1,4 @@ # NXP STB225 -platform-$(CONFIG_SOC_PNX833X) += pnx833x/ cflags-$(CONFIG_SOC_PNX833X) += -I$(srctree)/arch/mips/include/asm/mach-pnx833x load-$(CONFIG_NXP_STB220) += 0xffffffff80001000 load-$(CONFIG_NXP_STB225) += 0xffffffff80001000 diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform index 6095fcc334f4..02ee0791481d 100644 --- a/arch/mips/ralink/Platform +++ b/arch/mips/ralink/Platform @@ -1,7 +1,6 @@ # # Ralink SoC common stuff # -core-$(CONFIG_RALINK) += arch/mips/ralink/ cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink # diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c index 88bcce59beeb..94ca8379b83c 100644 --- a/arch/mips/ralink/bootrom.c +++ b/arch/mips/ralink/bootrom.c @@ -31,7 +31,7 @@ static const struct file_operations bootrom_file_ops = { .release = single_release, }; -static int bootrom_setup(void) +static int __init bootrom_setup(void) { debugfs_create_file("bootrom", 0444, NULL, NULL, &bootrom_file_ops); return 0; diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c index 0accb80db709..ca0ac607b0f3 100644 --- a/arch/mips/ralink/mt7621.c +++ b/arch/mips/ralink/mt7621.c @@ -20,11 +20,6 @@ #include "common.h" -#define SYSC_REG_SYSCFG 0x10 -#define SYSC_REG_CPLL_CLKCFG0 0x2c -#define SYSC_REG_CUR_CLK_STS 0x44 -#define CPU_CLK_SEL (BIT(30) | BIT(31)) - #define MT7621_GPIO_MODE_UART1 1 #define MT7621_GPIO_MODE_I2C 2 #define MT7621_GPIO_MODE_UART3_MASK 0x3 @@ -115,44 +110,6 @@ phys_addr_t mips_cpc_default_phys_base(void) panic("Cannot detect cpc address"); } -void __init ralink_clk_init(void) -{ - int cpu_fdiv = 0; - int cpu_ffrac = 0; - int fbdiv = 0; - u32 clk_sts, syscfg; - u8 clk_sel = 0, xtal_mode; - u32 cpu_clk; - - if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0) - clk_sel = 1; - - switch (clk_sel) { - case 0: - clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); - cpu_fdiv = ((clk_sts >> 8) & 0x1F); - cpu_ffrac = (clk_sts & 0x1F); - cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000; - break; - - case 1: - fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1; - syscfg = rt_sysc_r32(SYSC_REG_SYSCFG); - xtal_mode = (syscfg >> 6) & 0x7; - if (xtal_mode >= 6) { - /* 25Mhz Xtal */ - cpu_clk = 25 * fbdiv * 1000 * 1000; - } else if (xtal_mode >= 3) { - /* 40Mhz Xtal */ - cpu_clk = 40 * fbdiv * 1000 * 1000; - } else { - /* 20Mhz Xtal */ - cpu_clk = 20 * fbdiv * 1000 * 1000; - } - break; - } -} - void __init ralink_of_remap(void) { rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc"); diff --git a/arch/mips/rb532/Platform b/arch/mips/rb532/Platform index aeec45a7cbb3..12eaa8790b3e 100644 --- a/arch/mips/rb532/Platform +++ b/arch/mips/rb532/Platform @@ -1,7 +1,6 @@ # # Routerboard 532 # -platform-$(CONFIG_MIKROTIK_RB532) += rb532/ cflags-$(CONFIG_MIKROTIK_RB532) += \ -I$(srctree)/arch/mips/include/asm/mach-rc32434 load-$(CONFIG_MIKROTIK_RB532) += 0xffffffff80101000 diff --git a/arch/mips/sgi-ip22/Platform b/arch/mips/sgi-ip22/Platform index e8f6b3a42a48..62fa30bb959e 100644 --- a/arch/mips/sgi-ip22/Platform +++ b/arch/mips/sgi-ip22/Platform @@ -7,7 +7,6 @@ # current variable will break so for 64-bit kernels we have to raise the start # address by 8kb. # -platform-$(CONFIG_SGI_IP22) += sgi-ip22/ cflags-$(CONFIG_SGI_IP22) += -I$(srctree)/arch/mips/include/asm/mach-ip22 ifdef CONFIG_32BIT load-$(CONFIG_SGI_IP22) += 0xffffffff88002000 @@ -29,6 +28,5 @@ ifdef CONFIG_SGI_IP28 $(error gcc doesn't support needed option -mr10k-cache-barrier=store) endif endif -platform-$(CONFIG_SGI_IP28) += sgi-ip22/ cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28 load-$(CONFIG_SGI_IP28) += 0xa800000020004000 diff --git a/arch/mips/sgi-ip27/Platform b/arch/mips/sgi-ip27/Platform index 1fb9c2ea7c8f..e734ee6abd44 100644 --- a/arch/mips/sgi-ip27/Platform +++ b/arch/mips/sgi-ip27/Platform @@ -5,8 +5,6 @@ # symmon, 0xc00000000001c000 for production kernels. Note that the value must # be 16kb aligned or the handling of the current variable will break. # -ifdef CONFIG_SGI_IP27 -platform-$(CONFIG_SGI_IP27) += sgi-ip27/ cflags-$(CONFIG_SGI_IP27) += -I$(srctree)/arch/mips/include/asm/mach-ip27 ifdef CONFIG_MAPPED_KERNEL load-$(CONFIG_SGI_IP27) += 0xc00000004001c000 @@ -16,4 +14,3 @@ else load-$(CONFIG_SGI_IP27) += 0xa80000000001c000 OBJCOPYFLAGS := --change-addresses=0x57ffffff80000000 endif -endif diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 61f3565f3645..c0e33632bc37 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -21,7 +21,6 @@ #include <asm/time.h> #include <asm/pgtable.h> #include <asm/sgialib.h> -#include <asm/sn/ioc3.h> #include <asm/sn/klconfig.h> #include <asm/sn/arch.h> #include <asm/sn/addrs.h> @@ -29,14 +28,6 @@ #include "ip27-common.h" -#define TICK_SIZE (tick_nsec / 1000) - -/* Includes for ioc3_init(). */ -#include <asm/sn/types.h> -#include <asm/pci/bridge.h> - -#include "ip27-common.h" - static int rt_next_event(unsigned long delta, struct clock_event_device *evt) { unsigned int cpu = smp_processor_id(); diff --git a/arch/mips/sgi-ip30/Platform b/arch/mips/sgi-ip30/Platform index 2b5695c2049a..f6f11517e091 100644 --- a/arch/mips/sgi-ip30/Platform +++ b/arch/mips/sgi-ip30/Platform @@ -1,8 +1,5 @@ # # SGI-IP30 (Octane/Octane2) # -ifdef CONFIG_SGI_IP30 -platform-$(CONFIG_SGI_IP30) += sgi-ip30/ cflags-$(CONFIG_SGI_IP30) += -I$(srctree)/arch/mips/include/asm/mach-ip30 load-$(CONFIG_SGI_IP30) += 0xa800000020004000 -endif diff --git a/arch/mips/sgi-ip32/Platform b/arch/mips/sgi-ip32/Platform index 0fea556f3641..f58a7a02b4ca 100644 --- a/arch/mips/sgi-ip32/Platform +++ b/arch/mips/sgi-ip32/Platform @@ -6,6 +6,5 @@ # a multiple of the kernel stack size or the handling of the current variable # will break. # -platform-$(CONFIG_SGI_IP32) += sgi-ip32/ cflags-$(CONFIG_SGI_IP32) += -I$(srctree)/arch/mips/include/asm/mach-ip32 load-$(CONFIG_SGI_IP32) += 0xffffffff80004000 diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform index af117330ce14..65b2225b76b2 100644 --- a/arch/mips/sibyte/Platform +++ b/arch/mips/sibyte/Platform @@ -1,10 +1,6 @@ # # These are all rather similar so we consider them a single platform # -platform-$(CONFIG_SIBYTE_BCM112X) += sibyte/ -platform-$(CONFIG_SIBYTE_SB1250) += sibyte/ -platform-$(CONFIG_SIBYTE_BCM1x55) += sibyte/ -platform-$(CONFIG_SIBYTE_BCM1x80) += sibyte/ # # Sibyte SB1250 / BCM1480 family of SOCs diff --git a/arch/mips/sni/Platform b/arch/mips/sni/Platform index 2644a9d63c0f..b0b3dde0bef8 100644 --- a/arch/mips/sni/Platform +++ b/arch/mips/sni/Platform @@ -1,7 +1,6 @@ # # SNI RM # -platform-$(CONFIG_SNI_RM) += sni/ cflags-$(CONFIG_SNI_RM) += -I$(srctree)/arch/mips/include/asm/mach-rm ifdef CONFIG_CPU_LITTLE_ENDIAN load-$(CONFIG_SNI_RM) += 0xffffffff80600000 diff --git a/arch/mips/tools/elf-entry.c b/arch/mips/tools/elf-entry.c index adde79ce7fc0..dbd14ff05b4c 100644 --- a/arch/mips/tools/elf-entry.c +++ b/arch/mips/tools/elf-entry.c @@ -51,11 +51,14 @@ int main(int argc, const char *argv[]) nread = fread(&hdr, 1, sizeof(hdr), file); if (nread != sizeof(hdr)) { perror("Unable to read input file"); + fclose(file); return EXIT_FAILURE; } - if (memcmp(hdr.ehdr32.e_ident, ELFMAG, SELFMAG)) + if (memcmp(hdr.ehdr32.e_ident, ELFMAG, SELFMAG)) { + fclose(file); die("Input is not an ELF\n"); + } switch (hdr.ehdr32.e_ident[EI_CLASS]) { case ELFCLASS32: @@ -67,6 +70,7 @@ int main(int argc, const char *argv[]) entry = be32toh(hdr.ehdr32.e_entry); break; default: + fclose(file); die("Invalid ELF encoding\n"); } @@ -83,14 +87,17 @@ int main(int argc, const char *argv[]) entry = be64toh(hdr.ehdr64.e_entry); break; default: + fclose(file); die("Invalid ELF encoding\n"); } break; default: + fclose(file); die("Invalid ELF class\n"); } printf("0x%016" PRIx64 "\n", entry); + fclose(file); return EXIT_SUCCESS; } diff --git a/arch/mips/tools/loongson3-llsc-check.c b/arch/mips/tools/loongson3-llsc-check.c index 0ebddd0ae46f..bdbc7b4324ec 100644 --- a/arch/mips/tools/loongson3-llsc-check.c +++ b/arch/mips/tools/loongson3-llsc-check.c @@ -303,5 +303,7 @@ out_munmap: out_close: close(vmlinux_fd); out_ret: + fprintf(stdout, "loongson3-llsc-check returns %s\n", + status ? "failure" : "success"); return status; } diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 9a22a182b7a4..85c4c121c71f 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -58,7 +58,7 @@ config TOSHIBA_RBTX4939 config SOC_TX3927 bool select CEVT_TXX9 - select HAS_TXX9_SERIAL + imply HAS_TXX9_SERIAL select HAVE_PCI select IRQ_TXX9 select GPIO_TXX9 @@ -66,30 +66,30 @@ config SOC_TX3927 config SOC_TX4927 bool select CEVT_TXX9 - select HAS_TXX9_SERIAL + imply HAS_TXX9_SERIAL select HAVE_PCI select IRQ_TXX9 select PCI_TX4927 select GPIO_TXX9 - select HAS_TXX9_ACLC + imply HAS_TXX9_ACLC config SOC_TX4938 bool select CEVT_TXX9 - select HAS_TXX9_SERIAL + imply HAS_TXX9_SERIAL select HAVE_PCI select IRQ_TXX9 select PCI_TX4927 select GPIO_TXX9 - select HAS_TXX9_ACLC + imply HAS_TXX9_ACLC config SOC_TX4939 bool select CEVT_TXX9 - select HAS_TXX9_SERIAL + imply HAS_TXX9_SERIAL select HAVE_PCI select PCI_TX4927 - select HAS_TXX9_ACLC + imply HAS_TXX9_ACLC config TXX9_7SEGLED bool diff --git a/arch/mips/txx9/Platform b/arch/mips/txx9/Platform index a176d1fd5799..7f4429ba22eb 100644 --- a/arch/mips/txx9/Platform +++ b/arch/mips/txx9/Platform @@ -1,6 +1,3 @@ -platform-$(CONFIG_MACH_TX39XX) += txx9/ -platform-$(CONFIG_MACH_TX49XX) += txx9/ - cflags-$(CONFIG_MACH_TX39XX) += \ -I$(srctree)/arch/mips/include/asm/mach-tx39xx cflags-$(CONFIG_MACH_TX49XX) += \ diff --git a/arch/mips/vdso/Kconfig b/arch/mips/vdso/Kconfig new file mode 100644 index 000000000000..7aec721398d5 --- /dev/null +++ b/arch/mips/vdso/Kconfig @@ -0,0 +1,18 @@ +# For the pre-R6 code in arch/mips/vdso/vdso.h for locating +# the base address of VDSO, the linker will emit a R_MIPS_PC32 +# relocation in binutils > 2.25 but it will fail with older versions +# because that relocation is not supported for that symbol. As a result +# of which we are forced to disable the VDSO symbols when building +# with < 2.25 binutils on pre-R6 kernels. For more references on why we +# can't use other methods to get the base address of VDSO please refer to +# the comments on that file. +# +# GCC (at least up to version 9.2) appears to emit function calls that make use +# of the GOT when targeting microMIPS, which we can't use in the VDSO due to +# the lack of relocations. As such, we disable the VDSO for microMIPS builds. + +config MIPS_LD_CAN_LINK_VDSO + def_bool LD_VERSION >= 225000000 || LD_IS_LLD + +config MIPS_DISABLE_VDSO + def_bool CPU_MICROMIPS || (!CPU_MIPSR6 && !MIPS_LD_CAN_LINK_VDSO) diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile index d7fe8408603e..2e64c7600eea 100644 --- a/arch/mips/vdso/Makefile +++ b/arch/mips/vdso/Makefile @@ -52,44 +52,17 @@ endif CFLAGS_REMOVE_vgettimeofday.o = -pg -DISABLE_VDSO := n - -# -# For the pre-R6 code in arch/mips/vdso/vdso.h for locating -# the base address of VDSO, the linker will emit a R_MIPS_PC32 -# relocation in binutils > 2.25 but it will fail with older versions -# because that relocation is not supported for that symbol. As a result -# of which we are forced to disable the VDSO symbols when building -# with < 2.25 binutils on pre-R6 kernels. For more references on why we -# can't use other methods to get the base address of VDSO please refer to -# the comments on that file. -# -ifndef CONFIG_CPU_MIPSR6 - ifeq ($(call ld-ifversion, -lt, 225000000, y),y) +ifdef CONFIG_MIPS_DISABLE_VDSO + ifndef CONFIG_MIPS_LD_CAN_LINK_VDSO $(warning MIPS VDSO requires binutils >= 2.25) - DISABLE_VDSO := y endif -endif - -# -# GCC (at least up to version 9.2) appears to emit function calls that make use -# of the GOT when targeting microMIPS, which we can't use in the VDSO due to -# the lack of relocations. As such, we disable the VDSO for microMIPS builds. -# -ifdef CONFIG_CPU_MICROMIPS - DISABLE_VDSO := y -endif - -ifeq ($(DISABLE_VDSO),y) obj-vdso-y := $(filter-out vgettimeofday.o, $(obj-vdso-y)) - ccflags-vdso += -DDISABLE_MIPS_VDSO endif # VDSO linker flags. -VDSO_LDFLAGS := \ - -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 \ - $(addprefix -Wl$(comma),$(filter -E%,$(KBUILD_CFLAGS))) \ - -nostdlib -shared -Wl,--hash-style=sysv -Wl,--build-id +ldflags-y := -Bsymbolic --no-undefined -soname=linux-vdso.so.1 \ + $(filter -E%,$(KBUILD_CFLAGS)) -nostdlib -shared \ + -G 0 --eh-frame-hdr --hash-style=sysv --build-id -T CFLAGS_REMOVE_vdso.o = -pg @@ -108,11 +81,7 @@ quiet_cmd_vdso_mips_check = VDSOCHK $@ # quiet_cmd_vdsold_and_vdso_check = LD $@ - cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check); $(cmd_vdso_mips_check) - -quiet_cmd_vdsold = VDSO $@ - cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \ - -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@ + cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check); $(cmd_vdso_mips_check) quiet_cmd_vdsoas_o_S = AS $@ cmd_vdsoas_o_S = $(CC) $(a_flags) -c -o $@ $< diff --git a/arch/mips/vdso/vdso.lds.S b/arch/mips/vdso/vdso.lds.S index da4627430aba..d90b65724d78 100644 --- a/arch/mips/vdso/vdso.lds.S +++ b/arch/mips/vdso/vdso.lds.S @@ -91,7 +91,7 @@ PHDRS VERSION { LINUX_2.6 { -#ifndef DISABLE_MIPS_VDSO +#ifndef CONFIG_MIPS_DISABLE_VDSO global: __vdso_clock_gettime; __vdso_gettimeofday; diff --git a/arch/mips/vr41xx/Makefile b/arch/mips/vr41xx/Makefile new file mode 100644 index 000000000000..765020d5ee4d --- /dev/null +++ b/arch/mips/vr41xx/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +# +obj-$(CONFIG_MACH_VR41XX) += common/ +obj-$(CONFIG_CASIO_E55) += casio-e55/ +obj-$(CONFIG_IBM_WORKPAD) += ibm-workpad/ diff --git a/arch/mips/vr41xx/Platform b/arch/mips/vr41xx/Platform index b6c8d5c08ddb..3f593a3e5678 100644 --- a/arch/mips/vr41xx/Platform +++ b/arch/mips/vr41xx/Platform @@ -1,19 +1,16 @@ # # NEC VR4100 series based machines # -platform-$(CONFIG_MACH_VR41XX) += vr41xx/common/ cflags-$(CONFIG_MACH_VR41XX) += -I$(srctree)/arch/mips/include/asm/mach-vr41xx # # CASIO CASSIPEIA E-55/65 (VR4111) # -platform-$(CONFIG_CASIO_E55) += vr41xx/casio-e55/ load-$(CONFIG_CASIO_E55) += 0xffffffff80004000 # # IBM WorkPad z50 (VR4121) # -platform-$(CONFIG_IBM_WORKPAD) += vr41xx/ibm-workpad/ load-$(CONFIG_IBM_WORKPAD) += 0xffffffff80004000 # diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index 909f40fbcde2..d05e761d9572 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -20,7 +20,6 @@ #include <linux/delay.h> #include <linux/platform_device.h> -#include <asm/clock.h> #include <asm/idle.h> #include <asm/mach-loongson2ef/loongson.h> @@ -58,29 +57,20 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, loongson2_clockmod_table[index].driver_data) / 8; /* setting the cpu frequency */ - clk_set_rate(policy->clk, freq * 1000); + loongson2_cpu_set_rate(freq); return 0; } static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) { - struct clk *cpuclk; int i; unsigned long rate; int ret; - cpuclk = clk_get(NULL, "cpu_clk"); - if (IS_ERR(cpuclk)) { - pr_err("couldn't get CPU clk\n"); - return PTR_ERR(cpuclk); - } - rate = cpu_clock_freq / 1000; - if (!rate) { - clk_put(cpuclk); + if (!rate) return -EINVAL; - } /* clock table init */ for (i = 2; @@ -88,20 +78,16 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) i++) loongson2_clockmod_table[i].frequency = (rate * i) / 8; - ret = clk_set_rate(cpuclk, rate * 1000); - if (ret) { - clk_put(cpuclk); + ret = loongson2_cpu_set_rate(rate); + if (ret) return ret; - } - policy->clk = cpuclk; cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0); return 0; } static int loongson2_cpufreq_exit(struct cpufreq_policy *policy) { - clk_put(policy->clk); return 0; } diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 91bfdb784829..ae36edb1d7db 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -258,6 +258,16 @@ config PCI_HYPERV_INTERFACE The Hyper-V PCI Interface is a helper driver allows other drivers to have a common interface with the Hyper-V PCI frontend driver. +config PCI_LOONGSON + bool "LOONGSON PCI Controller" + depends on MACH_LOONGSON64 || COMPILE_TEST + depends on OF + depends on PCI_QUIRKS + default MACH_LOONGSON64 + help + Say Y here if you want to enable PCI controller support on + Loongson systems. + source "drivers/pci/controller/dwc/Kconfig" source "drivers/pci/controller/mobiveil/Kconfig" source "drivers/pci/controller/cadence/Kconfig" diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile index 158c59771824..fbac4b0190a0 100644 --- a/drivers/pci/controller/Makefile +++ b/drivers/pci/controller/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o obj-$(CONFIG_VMD) += vmd.o obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o +obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW obj-y += dwc/ obj-y += mobiveil/ diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c new file mode 100644 index 000000000000..459009c8a4a0 --- /dev/null +++ b/drivers/pci/controller/pci-loongson.c @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Loongson PCI Host Controller Driver + * + * Copyright (C) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com> + */ + +#include <linux/of_device.h> +#include <linux/of_pci.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include "../pci.h" + +/* Device IDs */ +#define DEV_PCIE_PORT_0 0x7a09 +#define DEV_PCIE_PORT_1 0x7a19 +#define DEV_PCIE_PORT_2 0x7a29 + +#define DEV_LS2K_APB 0x7a02 +#define DEV_LS7A_CONF 0x7a10 +#define DEV_LS7A_LPC 0x7a0c + +#define FLAG_CFG0 BIT(0) +#define FLAG_CFG1 BIT(1) +#define FLAG_DEV_FIX BIT(2) + +struct loongson_pci { + void __iomem *cfg0_base; + void __iomem *cfg1_base; + struct platform_device *pdev; + u32 flags; +}; + +/* Fixup wrong class code in PCIe bridges */ +static void bridge_class_quirk(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, bridge_class_quirk); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, bridge_class_quirk); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, bridge_class_quirk); + +static void system_bus_quirk(struct pci_dev *pdev) +{ + /* + * The address space consumed by these devices is outside the + * resources of the host bridge. + */ + pdev->mmio_always_on = 1; + pdev->non_compliant_bars = 1; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS2K_APB, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_CONF, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_LPC, system_bus_quirk); + +static void loongson_mrrs_quirk(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + struct pci_dev *bridge; + static const struct pci_device_id bridge_devids[] = { + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, + { 0, }, + }; + + /* look for the matching bridge */ + while (!pci_is_root_bus(bus)) { + bridge = bus->self; + bus = bus->parent; + /* + * Some Loongson PCIe ports have a h/w limitation of + * 256 bytes maximum read request size. They can't handle + * anything larger than this. So force this limit on + * any devices attached under these ports. + */ + if (pci_match_id(bridge_devids, bridge)) { + if (pcie_get_readrq(dev) > 256) { + pci_info(dev, "limiting MRRS to 256\n"); + pcie_set_readrq(dev, 256); + } + break; + } + } +} +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); + +static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, + unsigned int devfn, int where) +{ + unsigned long addroff = 0x0; + + if (bus != 0) + addroff |= BIT(28); /* Type 1 Access */ + addroff |= (where & 0xff) | ((where & 0xf00) << 16); + addroff |= (bus << 16) | (devfn << 8); + return priv->cfg1_base + addroff; +} + +static void __iomem *cfg0_map(struct loongson_pci *priv, int bus, + unsigned int devfn, int where) +{ + unsigned long addroff = 0x0; + + if (bus != 0) + addroff |= BIT(24); /* Type 1 Access */ + addroff |= (bus << 16) | (devfn << 8) | where; + return priv->cfg0_base + addroff; +} + +static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devfn, + int where) +{ + unsigned char busnum = bus->number; + struct pci_host_bridge *bridge = pci_find_host_bridge(bus); + struct loongson_pci *priv = pci_host_bridge_priv(bridge); + + /* + * Do not read more than one device on the bus other than + * the host bus. For our hardware the root bus is always bus 0. + */ + if (priv->flags & FLAG_DEV_FIX && busnum != 0 && + PCI_SLOT(devfn) > 0) + return NULL; + + /* CFG0 can only access standard space */ + if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base) + return cfg0_map(priv, busnum, devfn, where); + + /* CFG1 can access extended space */ + if (where < PCI_CFG_SPACE_EXP_SIZE && priv->cfg1_base) + return cfg1_map(priv, busnum, devfn, where); + + return NULL; +} + +static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + u8 val; + + irq = of_irq_parse_and_map_pci(dev, slot, pin); + if (irq > 0) + return irq; + + /* Care i8259 legacy systems */ + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val); + /* i8259 only have 15 IRQs */ + if (val > 15) + return 0; + + return val; +} + +/* H/w only accept 32-bit PCI operations */ +static struct pci_ops loongson_pci_ops = { + .map_bus = pci_loongson_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write32, +}; + +static const struct of_device_id loongson_pci_of_match[] = { + { .compatible = "loongson,ls2k-pci", + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + { .compatible = "loongson,ls7a-pci", + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + { .compatible = "loongson,rs780e-pci", + .data = (void *)(FLAG_CFG0), }, + {} +}; + +static int loongson_pci_probe(struct platform_device *pdev) +{ + struct loongson_pci *priv; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct pci_host_bridge *bridge; + struct resource *regs; + int err; + + if (!node) + return -ENODEV; + + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv)); + if (!bridge) + return -ENODEV; + + priv = pci_host_bridge_priv(bridge); + priv->pdev = pdev; + priv->flags = (unsigned long)of_device_get_match_data(dev); + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(dev, "missing mem resources for cfg0\n"); + return -EINVAL; + } + + priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs); + if (IS_ERR(priv->cfg0_base)) + return PTR_ERR(priv->cfg0_base); + + /* CFG1 is optional */ + if (priv->flags & FLAG_CFG1) { + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!regs) + dev_info(dev, "missing mem resource for cfg1\n"); + else { + priv->cfg1_base = devm_pci_remap_cfg_resource(dev, regs); + if (IS_ERR(priv->cfg1_base)) + priv->cfg1_base = NULL; + } + } + + err = pci_parse_request_of_pci_ranges(dev, &bridge->windows, + &bridge->dma_ranges, NULL); + if (err) { + dev_err(dev, "failed to get bridge resources\n"); + return err; + } + + bridge->dev.parent = dev; + bridge->sysdata = priv; + bridge->ops = &loongson_pci_ops; + bridge->map_irq = loongson_map_irq; + + err = pci_host_probe(bridge); + if (err) + return err; + + return 0; +} + +static struct platform_driver loongson_pci_driver = { + .driver = { + .name = "loongson-pci", + .of_match_table = loongson_pci_of_match, + }, + .probe = loongson_pci_probe, +}; +builtin_platform_driver(loongson_pci_driver); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 77b8a145c39b..d9c2c3301a8a 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1822,7 +1822,7 @@ int pci_setup_device(struct pci_dev *dev) /* Device class may be changed after fixup */ class = dev->class >> 8; - if (dev->non_compliant_bars) { + if (dev->non_compliant_bars && !dev->mmio_always_on) { pci_read_config_word(dev, PCI_COMMAND, &cmd); if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n"); diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig index 5e77b0dc5fd6..8ac149173c64 100644 --- a/drivers/platform/mips/Kconfig +++ b/drivers/platform/mips/Kconfig @@ -24,4 +24,10 @@ config CPU_HWMON help Loongson-3A/3B CPU Hwmon (temperature sensor) driver. +config RS780E_ACPI + bool "Loongson RS780E ACPI Controller" + depends on MACH_LOONGSON64 || COMPILE_TEST + help + Loongson RS780E PCH ACPI Controller driver. + endif # MIPS_PLATFORM_DEVICES diff --git a/drivers/platform/mips/Makefile b/drivers/platform/mips/Makefile index be8146c20dc8..178149098777 100644 --- a/drivers/platform/mips/Makefile +++ b/drivers/platform/mips/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o +obj-$(CONFIG_RS780E_ACPI) += rs780e-acpi.o diff --git a/arch/mips/loongson64/acpi_init.c b/drivers/platform/mips/rs780e-acpi.c index 8d7c119ddf91..e5a643b78ac9 100644 --- a/arch/mips/loongson64/acpi_init.c +++ b/drivers/platform/mips/rs780e-acpi.c @@ -3,32 +3,23 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/export.h> +#include <linux/of.h> +#include <linux/platform_device.h> -#define SBX00_ACPI_IO_BASE 0x800 -#define SBX00_ACPI_IO_SIZE 0x100 +static unsigned long acpi_iobase; -#define ACPI_PM_EVT_BLK (SBX00_ACPI_IO_BASE + 0x00) /* 4 bytes */ -#define ACPI_PM_CNT_BLK (SBX00_ACPI_IO_BASE + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (SBX00_ACPI_IO_BASE + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (SBX00_ACPI_IO_BASE + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (SBX00_ACPI_IO_BASE + 0x10) /* 8 bytes */ -#define ACPI_END (SBX00_ACPI_IO_BASE + 0x80) +#define ACPI_PM_EVT_BLK (acpi_iobase + 0x00) /* 4 bytes */ +#define ACPI_PM_CNT_BLK (acpi_iobase + 0x04) /* 2 bytes */ +#define ACPI_PMA_CNT_BLK (acpi_iobase + 0x0F) /* 1 byte */ +#define ACPI_PM_TMR_BLK (acpi_iobase + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (acpi_iobase + 0x10) /* 8 bytes */ +#define ACPI_END (acpi_iobase + 0x80) #define PM_INDEX 0xCD6 #define PM_DATA 0xCD7 #define PM2_INDEX 0xCD0 #define PM2_DATA 0xCD1 -/* - * SCI interrupt need acpi space, allocate here - */ - -static int __init register_acpi_resource(void) -{ - request_region(SBX00_ACPI_IO_BASE, SBX00_ACPI_IO_SIZE, "acpi"); - return 0; -} - static void pmio_write_index(u16 index, u8 reg, u8 value) { outb(reg, index); @@ -141,11 +132,38 @@ void acpi_registers_setup(void) pm2_iowrite(0xf8, value); } -int __init sbx00_acpi_init(void) +static int rs780e_acpi_probe(struct platform_device *pdev) { - register_acpi_resource(); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) + return -ENODEV; + + /* SCI interrupt need acpi space, allocate here */ + if (!request_region(res->start, resource_size(res), "acpi")) { + pr_err("RS780E-ACPI: Failed to request IO Region\n"); + return -EBUSY; + } + + acpi_iobase = res->start; + acpi_registers_setup(); acpi_hw_clear_status(); return 0; } + +static const struct of_device_id rs780e_acpi_match[] = { + { .compatible = "loongson,rs780e-acpi" }, + {}, +}; + +static struct platform_driver rs780e_acpi_driver = { + .probe = rs780e_acpi_probe, + .driver = { + .name = "RS780E-ACPI", + .of_match_table = rs780e_acpi_match, + }, +}; +builtin_platform_driver(rs780e_acpi_driver); diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index db7df7daa0d8..7056a25479d6 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -188,6 +188,23 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, } #endif + +/* + * If two threads concurrently fault at the same page, the thread that + * won the race updates the PTE and its local TLB/Cache. The other thread + * gives up, simply does nothing, and continues; on architectures where + * software can update TLB, local TLB can be updated here to avoid next page + * fault. This function updates TLB only, do nothing with cache or others. + * It is the difference with function update_mmu_cache. + */ +#ifndef __HAVE_ARCH_UPDATE_MMU_TLB +static inline void update_mmu_tlb(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep) +{ +} +#define __HAVE_ARCH_UPDATE_MMU_TLB +#endif + /* * Some architectures may be able to avoid expensive synchronization * primitives when modifications are made to PTE's which are already @@ -227,6 +244,22 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addres } #endif +/* + * On some architectures hardware does not set page access bit when accessing + * memory page, it is responsibilty of software setting this bit. It brings + * out extra page fault penalty to track page access bit. For optimization page + * access bit can be set during all page fault flow on these arches. + * To be differentiate with macro pte_mkyoung, this macro is used on platforms + * where software maintains page access bit. + */ +#ifndef pte_sw_mkyoung +static inline pte_t pte_sw_mkyoung(pte_t pte) +{ + return pte; +} +#define pte_sw_mkyoung pte_sw_mkyoung +#endif + #ifndef pte_savedwrite #define pte_savedwrite pte_write #endif diff --git a/init/Kconfig b/init/Kconfig index 74a5ac65644f..5c7bafe8bb0b 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -23,6 +23,9 @@ config LD_VERSION config CC_IS_CLANG def_bool $(success,$(CC) --version | head -n 1 | grep -q clang) +config LD_IS_LLD + def_bool $(success,$(LD) -v | head -n 1 | grep -q LLD) + config CLANG_VERSION int default $(shell,$(srctree)/scripts/clang-version.sh $(CC)) diff --git a/mm/memory.c b/mm/memory.c index 21438278afca..a0e21e2c571e 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2434,10 +2434,9 @@ static inline bool cow_user_page(struct page *dst, struct page *src, if (!likely(pte_same(*vmf->pte, vmf->orig_pte))) { /* * Other thread has already handled the fault - * and we don't need to do anything. If it's - * not the case, the fault will be triggered - * again on the same address. + * and update local tlb only */ + update_mmu_tlb(vma, addr, vmf->pte); ret = false; goto pte_unlock; } @@ -2461,7 +2460,8 @@ static inline bool cow_user_page(struct page *dst, struct page *src, vmf->pte = pte_offset_map_lock(mm, vmf->pmd, addr, &vmf->ptl); locked = true; if (!likely(pte_same(*vmf->pte, vmf->orig_pte))) { - /* The PTE changed under us. Retry page fault. */ + /* The PTE changed under us, update local tlb */ + update_mmu_tlb(vma, addr, vmf->pte); ret = false; goto pte_unlock; } @@ -2702,6 +2702,7 @@ static vm_fault_t wp_page_copy(struct vm_fault *vmf) } flush_cache_page(vma, vmf->address, pte_pfn(vmf->orig_pte)); entry = mk_pte(new_page, vma->vm_page_prot); + entry = pte_sw_mkyoung(entry); entry = maybe_mkwrite(pte_mkdirty(entry), vma); /* * Clear the pte entry and flush it first, before updating the @@ -2750,6 +2751,7 @@ static vm_fault_t wp_page_copy(struct vm_fault *vmf) new_page = old_page; page_copied = 1; } else { + update_mmu_tlb(vma, vmf->address, vmf->pte); mem_cgroup_cancel_charge(new_page, memcg, false); } @@ -2810,6 +2812,7 @@ vm_fault_t finish_mkwrite_fault(struct vm_fault *vmf) * pte_offset_map_lock. */ if (!pte_same(*vmf->pte, vmf->orig_pte)) { + update_mmu_tlb(vmf->vma, vmf->address, vmf->pte); pte_unmap_unlock(vmf->pte, vmf->ptl); return VM_FAULT_NOPAGE; } @@ -2934,6 +2937,7 @@ static vm_fault_t do_wp_page(struct vm_fault *vmf) vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address, &vmf->ptl); if (!pte_same(*vmf->pte, vmf->orig_pte)) { + update_mmu_tlb(vma, vmf->address, vmf->pte); unlock_page(vmf->page); pte_unmap_unlock(vmf->pte, vmf->ptl); put_page(vmf->page); @@ -3339,8 +3343,10 @@ static vm_fault_t do_anonymous_page(struct vm_fault *vmf) vma->vm_page_prot)); vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address, &vmf->ptl); - if (!pte_none(*vmf->pte)) + if (!pte_none(*vmf->pte)) { + update_mmu_tlb(vma, vmf->address, vmf->pte); goto unlock; + } ret = check_stable_address_space(vma->vm_mm); if (ret) goto unlock; @@ -3371,13 +3377,16 @@ static vm_fault_t do_anonymous_page(struct vm_fault *vmf) __SetPageUptodate(page); entry = mk_pte(page, vma->vm_page_prot); + entry = pte_sw_mkyoung(entry); if (vma->vm_flags & VM_WRITE) entry = pte_mkwrite(pte_mkdirty(entry)); vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address, &vmf->ptl); - if (!pte_none(*vmf->pte)) + if (!pte_none(*vmf->pte)) { + update_mmu_cache(vma, vmf->address, vmf->pte); goto release; + } ret = check_stable_address_space(vma->vm_mm); if (ret) @@ -3644,11 +3653,14 @@ vm_fault_t alloc_set_pte(struct vm_fault *vmf, struct mem_cgroup *memcg, } /* Re-check under ptl */ - if (unlikely(!pte_none(*vmf->pte))) + if (unlikely(!pte_none(*vmf->pte))) { + update_mmu_tlb(vma, vmf->address, vmf->pte); return VM_FAULT_NOPAGE; + } flush_icache_page(vma, page); entry = mk_pte(page, vma->vm_page_prot); + entry = pte_sw_mkyoung(entry); if (write) entry = maybe_mkwrite(pte_mkdirty(entry), vma); /* copy-on-write page */ @@ -4222,8 +4234,10 @@ static vm_fault_t handle_pte_fault(struct vm_fault *vmf) vmf->ptl = pte_lockptr(vmf->vma->vm_mm, vmf->pmd); spin_lock(vmf->ptl); entry = vmf->orig_pte; - if (unlikely(!pte_same(*vmf->pte, entry))) + if (unlikely(!pte_same(*vmf->pte, entry))) { + update_mmu_tlb(vmf->vma, vmf->address, vmf->pte); goto unlock; + } if (vmf->flags & FAULT_FLAG_WRITE) { if (!pte_write(entry)) return do_wp_page(vmf); diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c index b1d9615f2375..d9e348444bd0 100644 --- a/sound/soc/txx9/txx9aclc-ac97.c +++ b/sound/soc/txx9/txx9aclc-ac97.c @@ -14,6 +14,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/gfp.h> +#include <asm/mach-tx39xx/ioremap.h> /* for TXX9_DIRECTMAP_BASE */ #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> |