diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/img-dw-mshc.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 16 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/hsmmc.c | 239 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/hsmmc.h | 9 | ||||
| -rw-r--r-- | drivers/mmc/host/dw_mmc.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/omap_hsmmc.c | 11 | ||||
| -rw-r--r-- | drivers/mmc/host/sunxi-mmc.c | 8 | ||||
| -rw-r--r-- | include/linux/platform_data/hsmmc-omap.h | 10 |
11 files changed, 16 insertions, 284 deletions
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index aad98442788b..a58c173b7ab9 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -78,7 +78,6 @@ Example: }; dwmmc0@12200000 { - num-slots = <1>; cap-mmc-highspeed; cap-sd-highspeed; broken-cd; diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt index 85de99fcaa2f..c54e577eea07 100644 --- a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt @@ -24,6 +24,5 @@ Example: fifo-depth = <0x20>; bus-width = <4>; - num-slots = <1>; disable-wp; }; diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt index 8af1afcb86dc..07242d141773 100644 --- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -36,7 +36,6 @@ Example: /* Board portion */ dwmmc0@fcd03000 { - num-slots = <1>; vmmc-supply = <&ldo12>; fifo-depth = <0x100>; pinctrl-names = "default"; @@ -52,7 +51,6 @@ Example: dwmmc_1: dwmmc1@f723e000 { compatible = "hisilicon,hi6220-dw-mshc"; - num-slots = <0x1>; bus-width = <0x4>; disable-wp; cap-sd-highspeed; diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 9cb55ca57461..ef3e5f14067a 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -12,12 +12,12 @@ Required Properties: * #address-cells: should be 1. * #size-cells: should be 0. -# Slots: The slot specific information are contained within child-nodes with - each child-node representing a supported slot. There should be atleast one - child node representing a card slot. The name of the child node representing - the slot is recommended to be slot@n where n is the unique number of the slot - connected to the controller. The following are optional properties which - can be included in the slot child node. +# Slots (DEPRECATED): The slot specific information are contained within + child-nodes with each child-node representing a supported slot. There should + be atleast one child node representing a card slot. The name of the child node + representing the slot is recommended to be slot@n where n is the unique number + of the slot connected to the controller. The following are optional properties + which can be included in the slot child node. * reg: specifies the physical slot number. The valid values of this property is 0 to (num-slots -1), where num-slots is the value @@ -63,7 +63,7 @@ Optional properties: clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default. (Use the "max-frequency" instead of "clock-freq-min-max".) -* num-slots: specifies the number of slots supported by the controller. +* num-slots (DEPRECATED): specifies the number of slots supported by the controller. The number of physical slots actually used could be equal or less than the value specified by num-slots. If this property is not specified, the value of num-slot property is assumed to be 1. @@ -124,7 +124,6 @@ board specific portions as listed below. dwmmc0@12200000 { clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; - num-slots = <1>; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; @@ -139,7 +138,6 @@ board specific portions as listed below. dwmmc0@12200000 { clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; - num-slots = <1>; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt index eaade0e5adeb..906819a90c2b 100644 --- a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt @@ -25,7 +25,6 @@ Example: clock-frequency = <50000000>; clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; clock-names = "biu", "ciu"; - num-slots = <1>; max-frequency = <50000000>; cap-sdio-irq; cap-sd-highspeed; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index be517b048762..5b614388d72f 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -32,120 +32,6 @@ static u16 control_devconf1_offset; #define HSMMC_NAME_LEN 9 -static void omap_hsmmc1_before_set_reg(struct device *dev, - int power_on, int vdd) -{ - u32 reg, prog_io; - struct omap_hsmmc_platform_data *mmc = dev->platform_data; - - if (mmc->remux) - mmc->remux(dev, power_on); - - /* - * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the - * card with Vcc regulator (from twl4030 or whatever). OMAP has both - * 1.8V and 3.0V modes, controlled by the PBIAS register. - * - * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which - * is most naturally TWL VSIM; those pins also use PBIAS. - * - * FIXME handle VMMC1A as needed ... - */ - if (power_on) { - if (cpu_is_omap2430()) { - reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1); - if ((1 << vdd) >= MMC_VDD_30_31) - reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE; - else - reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE; - omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1); - } - - if (mmc->internal_clock) { - reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - reg |= OMAP2_MMCSDIO1ADPCLKISEL; - omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0); - } - - reg = omap_ctrl_readl(control_pbias_offset); - if (cpu_is_omap3630()) { - /* Set MMC I/O to 52MHz */ - prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); - prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL; - omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1); - } else { - reg |= OMAP2_PBIASSPEEDCTRL0; - } - reg &= ~OMAP2_PBIASLITEPWRDNZ0; - omap_ctrl_writel(reg, control_pbias_offset); - } else { - reg = omap_ctrl_readl(control_pbias_offset); - reg &= ~OMAP2_PBIASLITEPWRDNZ0; - omap_ctrl_writel(reg, control_pbias_offset); - } -} - -static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd) -{ - u32 reg; - - /* 100ms delay required for PBIAS configuration */ - msleep(100); - - if (power_on) { - reg = omap_ctrl_readl(control_pbias_offset); - reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0); - if ((1 << vdd) <= MMC_VDD_165_195) - reg &= ~OMAP2_PBIASLITEVMODE0; - else - reg |= OMAP2_PBIASLITEVMODE0; - omap_ctrl_writel(reg, control_pbias_offset); - } else { - reg = omap_ctrl_readl(control_pbias_offset); - reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 | - OMAP2_PBIASLITEVMODE0); - omap_ctrl_writel(reg, control_pbias_offset); - } -} - -static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc) -{ - u32 reg; - - reg = omap_ctrl_readl(control_devconf1_offset); - if (mmc->internal_clock) - reg |= OMAP2_MMCSDIO2ADPCLKISEL; - else - reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); -} - -static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd) -{ - struct omap_hsmmc_platform_data *mmc = dev->platform_data; - - if (mmc->remux) - mmc->remux(dev, power_on); - - if (power_on) - hsmmc2_select_input_clk_src(mmc); -} - -static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd) -{ - struct omap_hsmmc_platform_data *mmc = dev->platform_data; - - if (power_on) - hsmmc2_select_input_clk_src(mmc); - - return 0; -} - -static int nop_mmc_set_power(struct device *dev, int power_on, int vdd) -{ - return 0; -} - static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, struct omap_hsmmc_platform_data *mmc) { @@ -157,101 +43,11 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, return -ENOMEM; } - if (c->name) - strncpy(hc_name, c->name, HSMMC_NAME_LEN); - else - snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", - c->mmc, 1); + snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1); mmc->name = hc_name; mmc->caps = c->caps; - mmc->internal_clock = !c->ext_clock; mmc->reg_offset = 0; - if (c->cover_only) { - /* detect if mobile phone cover removed */ - mmc->gpio_cd = -EINVAL; - mmc->gpio_cod = c->gpio_cd; - } else { - /* card detect pin on the mmc socket itself */ - mmc->gpio_cd = c->gpio_cd; - mmc->gpio_cod = -EINVAL; - } - mmc->gpio_wp = c->gpio_wp; - - mmc->remux = c->remux; - mmc->init_card = c->init_card; - - if (c->nonremovable) - mmc->nonremovable = 1; - - /* - * NOTE: MMC slots should have a Vcc regulator set up. - * This may be from a TWL4030-family chip, another - * controllable regulator, or a fixed supply. - * - * temporary HACK: ocr_mask instead of fixed supply - */ - if (soc_is_am35xx()) - mmc->ocr_mask = MMC_VDD_165_195 | - MMC_VDD_26_27 | - MMC_VDD_27_28 | - MMC_VDD_29_30 | - MMC_VDD_30_31 | - MMC_VDD_31_32; - else - mmc->ocr_mask = c->ocr_mask; - - if (!soc_is_am35xx()) - mmc->features |= HSMMC_HAS_PBIAS; - - switch (c->mmc) { - case 1: - if (mmc->features & HSMMC_HAS_PBIAS) { - /* on-chip level shifting via PBIAS0/PBIAS1 */ - mmc->before_set_reg = - omap_hsmmc1_before_set_reg; - mmc->after_set_reg = - omap_hsmmc1_after_set_reg; - } - - if (soc_is_am35xx()) - mmc->set_power = nop_mmc_set_power; - - /* OMAP3630 HSMMC1 supports only 4-bit */ - if (cpu_is_omap3630() && - (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - mmc->caps = c->caps; - } - break; - case 2: - if (soc_is_am35xx()) - mmc->set_power = am35x_hsmmc2_set_power; - - if (c->ext_clock) - c->transceiver = 1; - if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - } - if (mmc->features & HSMMC_HAS_PBIAS) { - /* off-chip level shifting, or none */ - mmc->before_set_reg = hsmmc2_before_set_reg; - mmc->after_set_reg = NULL; - } - break; - case 3: - case 4: - case 5: - mmc->before_set_reg = NULL; - mmc->after_set_reg = NULL; - break; - default: - pr_err("MMC%d configuration not supported!\n", c->mmc); - kfree(hc_name); - return -ENODEV; - } return 0; } @@ -260,7 +56,6 @@ static int omap_hsmmc_done; void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) { struct platform_device *pdev; - struct omap_hsmmc_platform_data *mmc_pdata; int res; if (omap_hsmmc_done != 1) @@ -269,32 +64,12 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) omap_hsmmc_done++; for (; c->mmc; c++) { - if (!c->deferred) - continue; - pdev = c->pdev; if (!pdev) continue; - - mmc_pdata = pdev->dev.platform_data; - if (!mmc_pdata) - continue; - - if (c->cover_only) { - /* detect if mobile phone cover removed */ - mmc_pdata->gpio_cd = -EINVAL; - mmc_pdata->gpio_cod = c->gpio_cd; - } else { - /* card detect pin on the mmc socket itself */ - mmc_pdata->gpio_cd = c->gpio_cd; - mmc_pdata->gpio_cod = -EINVAL; - } - mmc_pdata->gpio_wp = c->gpio_wp; - res = omap_device_register(pdev); if (res) - pr_err("Could not late init MMC %s\n", - c->name); + pr_err("Could not late init MMC\n"); } } @@ -336,13 +111,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, if (oh->dev_attr != NULL) { mmc_dev_attr = oh->dev_attr; mmc_data->controller_flags = mmc_dev_attr->flags; - /* - * erratum 2.1.1.128 doesn't apply if board has - * a transceiver is attached - */ - if (hsmmcinfo->transceiver) - mmc_data->controller_flags &= - ~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ; } pdev = platform_device_alloc(name, ctrl_nr - 1); @@ -367,9 +135,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, hsmmcinfo->pdev = pdev; - if (hsmmcinfo->deferred) - goto free_mmc; - res = omap_device_register(pdev); if (res) { pr_err("Could not register od for %s\n", name); diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 69b619ddc765..af9af5094ec3 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -12,18 +12,9 @@ struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u32 caps; /* 4/8 wires and any additional host * capabilities OR'd (ref. linux/mmc/host.h) */ - bool transceiver; /* MMC-2 option */ - bool ext_clock; /* use external pin for input clock */ - bool cover_only; /* No card detect - just cover switch */ - bool nonremovable; /* Nonremovable e.g. eMMC */ - bool deferred; /* mmc needs a deferred probe */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ - char *name; /* or NULL for default */ struct platform_device *pdev; /* mmc controller instance */ - int ocr_mask; /* temporary HACK */ - /* Remux (pad configuration) when powering on/off */ - void (*remux)(struct device *dev, int power_on); /* init some special card */ void (*init_card)(struct mmc_card *card); }; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index a9dfb26972f2..250dc6ec4c82 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2957,7 +2957,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) } /* find out number of slots supported */ - if (device_property_read_u32(dev, "num-slots", &pdata->num_slots)) + if (!device_property_read_u32(dev, "num-slots", &pdata->num_slots)) dev_info(dev, "'num-slots' was deprecated.\n"); if (device_property_read_u32(dev, "fifo-depth", &pdata->fifo_depth)) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 7c12f3715676..04ff3c97a535 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -356,9 +356,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on, struct mmc_host *mmc = host->mmc; int ret = 0; - if (mmc_pdata(host)->set_power) - return mmc_pdata(host)->set_power(host->dev, power_on, vdd); - /* * If we don't see a Vcc regulator, assume it's a fixed * voltage always-on regulator. @@ -366,9 +363,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on, if (IS_ERR(mmc->supply.vmmc)) return 0; - if (mmc_pdata(host)->before_set_reg) - mmc_pdata(host)->before_set_reg(host->dev, power_on, vdd); - ret = omap_hsmmc_set_pbias(host, false, 0); if (ret) return ret; @@ -400,9 +394,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on, return ret; } - if (mmc_pdata(host)->after_set_reg) - mmc_pdata(host)->after_set_reg(host->dev, power_on, vdd); - return 0; err_set_voltage: @@ -469,8 +460,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) int ret; struct mmc_host *mmc = host->mmc; - if (mmc_pdata(host)->set_power) - return 0; ret = mmc_regulator_get_supply(mmc); if (ret == -EPROBE_DEFER) diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index d6fa2214aaae..0fb4e4c119e1 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -793,8 +793,12 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host, } mmc_writel(host, REG_CLKCR, rval); - if (host->cfg->needs_new_timings) - mmc_writel(host, REG_SD_NTSR, SDXC_2X_TIMING_MODE); + if (host->cfg->needs_new_timings) { + /* Don't touch the delay bits */ + rval = mmc_readl(host, REG_SD_NTSR); + rval |= SDXC_2X_TIMING_MODE; + mmc_writel(host, REG_SD_NTSR, rval); + } ret = sunxi_mmc_clk_set_phase(host, ios, rate); if (ret) diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h index 8e981be2e2c2..0ff1e0dba720 100644 --- a/include/linux/platform_data/hsmmc-omap.h +++ b/include/linux/platform_data/hsmmc-omap.h @@ -55,9 +55,6 @@ struct omap_hsmmc_platform_data { u32 caps; /* Used for the MMC driver on 2430 and later */ u32 pm_caps; /* PM capabilities of the mmc */ - /* use the internal clock */ - unsigned internal_clock:1; - /* nonremovable e.g. eMMC */ unsigned nonremovable:1; @@ -73,13 +70,6 @@ struct omap_hsmmc_platform_data { int gpio_cd; /* gpio (card detect) */ int gpio_cod; /* gpio (cover detect) */ int gpio_wp; /* gpio (write protect) */ - - int (*set_power)(struct device *dev, int power_on, int vdd); - void (*remux)(struct device *dev, int power_on); - /* Call back before enabling / disabling regulators */ - void (*before_set_reg)(struct device *dev, int power_on, int vdd); - /* Call back after enabling / disabling regulators */ - void (*after_set_reg)(struct device *dev, int power_on, int vdd); /* if we have special card, init it using this callback */ void (*init_card)(struct mmc_card *card); |