diff options
| -rw-r--r-- | drivers/pci/hotplug/pciehp_hpc.c | 17 | ||||
| -rw-r--r-- | drivers/pci/pci.c | 22 | ||||
| -rw-r--r-- | drivers/pci/pcie/pme.c | 48 |
3 files changed, 52 insertions, 35 deletions
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 35676f5ec9bd..6a2365cd794e 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -736,12 +736,25 @@ void pcie_clear_hotplug_events(struct controller *ctrl) void pcie_enable_interrupt(struct controller *ctrl) { - pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_HPIE, PCI_EXP_SLTCTL_HPIE); + u16 mask; + + mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE; + pcie_write_cmd(ctrl, mask, mask); } void pcie_disable_interrupt(struct controller *ctrl) { - pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_HPIE); + u16 mask; + + /* + * Mask hot-plug interrupt to prevent it triggering immediately + * when the link goes inactive (we still get PME when any of the + * enabled events is detected). Same goes with Link Layer State + * changed event which generates PME immediately when the link goes + * inactive so mask it as well. + */ + mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE; + pcie_write_cmd(ctrl, 0, mask); } /* diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 56b9db4c658e..bdb442004537 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2545,6 +2545,25 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev) pm_runtime_put_sync(parent); } +static const struct dmi_system_id bridge_d3_blacklist[] = { +#ifdef CONFIG_X86 + { + /* + * Gigabyte X299 root port is not marked as hotplug capable + * which allows Linux to power manage it. However, this + * confuses the BIOS SMI handler so don't power manage root + * ports on that system. + */ + .ident = "X299 DESIGNARE EX-CF", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"), + }, + }, +#endif + { } +}; + /** * pci_bridge_d3_possible - Is it possible to put the bridge into D3 * @bridge: Bridge to check @@ -2590,6 +2609,9 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) if (bridge->is_hotplug_bridge) return false; + if (dmi_check_system(bridge_d3_blacklist)) + return false; + /* * It should be safe to put PCIe ports from 2015 or newer * to D3. diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c index 0dbcf429089f..54d593d10396 100644 --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -363,6 +363,16 @@ static bool pcie_pme_check_wakeup(struct pci_bus *bus) return false; } +static void pcie_pme_disable_interrupt(struct pci_dev *port, + struct pcie_pme_service_data *data) +{ + spin_lock_irq(&data->lock); + pcie_pme_interrupt_enable(port, false); + pcie_clear_root_pme_status(port); + data->noirq = true; + spin_unlock_irq(&data->lock); +} + /** * pcie_pme_suspend - Suspend PCIe PME service device. * @srv: PCIe service device to suspend. @@ -387,11 +397,7 @@ static int pcie_pme_suspend(struct pcie_device *srv) return 0; } - spin_lock_irq(&data->lock); - pcie_pme_interrupt_enable(port, false); - pcie_clear_root_pme_status(port); - data->noirq = true; - spin_unlock_irq(&data->lock); + pcie_pme_disable_interrupt(port, data); synchronize_irq(srv->irq); @@ -427,34 +433,12 @@ static int pcie_pme_resume(struct pcie_device *srv) */ static void pcie_pme_remove(struct pcie_device *srv) { - pcie_pme_suspend(srv); - free_irq(srv->irq, srv); - kfree(get_service_data(srv)); -} - -static int pcie_pme_runtime_suspend(struct pcie_device *srv) -{ - struct pcie_pme_service_data *data = get_service_data(srv); - - spin_lock_irq(&data->lock); - pcie_pme_interrupt_enable(srv->port, false); - pcie_clear_root_pme_status(srv->port); - data->noirq = true; - spin_unlock_irq(&data->lock); - - return 0; -} - -static int pcie_pme_runtime_resume(struct pcie_device *srv) -{ struct pcie_pme_service_data *data = get_service_data(srv); - spin_lock_irq(&data->lock); - pcie_pme_interrupt_enable(srv->port, true); - data->noirq = false; - spin_unlock_irq(&data->lock); - - return 0; + pcie_pme_disable_interrupt(srv->port, data); + free_irq(srv->irq, srv); + cancel_work_sync(&data->work); + kfree(data); } static struct pcie_port_service_driver pcie_pme_driver = { @@ -464,8 +448,6 @@ static struct pcie_port_service_driver pcie_pme_driver = { .probe = pcie_pme_probe, .suspend = pcie_pme_suspend, - .runtime_suspend = pcie_pme_runtime_suspend, - .runtime_resume = pcie_pme_runtime_resume, .resume = pcie_pme_resume, .remove = pcie_pme_remove, }; |