summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/base/regmap/Kconfig4
-rw-r--r--drivers/base/regmap/Makefile1
-rw-r--r--drivers/base/regmap/internal.h3
-rw-r--r--drivers/base/regmap/regmap-sccb.c128
-rw-r--r--drivers/base/regmap/regmap-slimbus.c23
-rw-r--r--drivers/base/regmap/regmap.c79
-rw-r--r--drivers/i2c/i2c-core-smbus.c28
-rw-r--r--include/linux/i2c.h11
-rw-r--r--include/linux/regmap.h54
9 files changed, 303 insertions, 28 deletions
diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig
index aff34c0c2a3e..6ad5ef48b61e 100644
--- a/drivers/base/regmap/Kconfig
+++ b/drivers/base/regmap/Kconfig
@@ -45,3 +45,7 @@ config REGMAP_IRQ
config REGMAP_SOUNDWIRE
tristate
depends on SOUNDWIRE_BUS
+
+config REGMAP_SCCB
+ tristate
+ depends on I2C
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index 5ed0023fabda..f5b4e8851d00 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_REGMAP_MMIO) += regmap-mmio.o
obj-$(CONFIG_REGMAP_IRQ) += regmap-irq.o
obj-$(CONFIG_REGMAP_W1) += regmap-w1.o
obj-$(CONFIG_REGMAP_SOUNDWIRE) += regmap-sdw.o
+obj-$(CONFIG_REGMAP_SCCB) += regmap-sccb.o
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index 53785e0e297a..a6bf34d6394e 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -94,10 +94,12 @@ struct regmap {
bool (*readable_reg)(struct device *dev, unsigned int reg);
bool (*volatile_reg)(struct device *dev, unsigned int reg);
bool (*precious_reg)(struct device *dev, unsigned int reg);
+ bool (*readable_noinc_reg)(struct device *dev, unsigned int reg);
const struct regmap_access_table *wr_table;
const struct regmap_access_table *rd_table;
const struct regmap_access_table *volatile_table;
const struct regmap_access_table *precious_table;
+ const struct regmap_access_table *rd_noinc_table;
int (*reg_read)(void *context, unsigned int reg, unsigned int *val);
int (*reg_write)(void *context, unsigned int reg, unsigned int val);
@@ -181,6 +183,7 @@ bool regmap_writeable(struct regmap *map, unsigned int reg);
bool regmap_readable(struct regmap *map, unsigned int reg);
bool regmap_volatile(struct regmap *map, unsigned int reg);
bool regmap_precious(struct regmap *map, unsigned int reg);
+bool regmap_readable_noinc(struct regmap *map, unsigned int reg);
int _regmap_write(struct regmap *map, unsigned int reg,
unsigned int val);
diff --git a/drivers/base/regmap/regmap-sccb.c b/drivers/base/regmap/regmap-sccb.c
new file mode 100644
index 000000000000..597042e2d009
--- /dev/null
+++ b/drivers/base/regmap/regmap-sccb.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+// Register map access API - SCCB support
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "internal.h"
+
+/**
+ * sccb_is_available - Check if the adapter supports SCCB protocol
+ * @adap: I2C adapter
+ *
+ * Return true if the I2C adapter is capable of using SCCB helper functions,
+ * false otherwise.
+ */
+static bool sccb_is_available(struct i2c_adapter *adap)
+{
+ u32 needed_funcs = I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+
+ /*
+ * If we ever want support for hardware doing SCCB natively, we will
+ * introduce a sccb_xfer() callback to struct i2c_algorithm and check
+ * for it here.
+ */
+
+ return (i2c_get_functionality(adap) & needed_funcs) == needed_funcs;
+}
+
+/**
+ * regmap_sccb_read - Read data from SCCB slave device
+ * @context: Device that will be interacted with
+ * @reg: Register to be read from
+ * @val: Pointer to store read value
+ *
+ * This executes the 2-phase write transmission cycle that is followed by a
+ * 2-phase read transmission cycle, returning negative errno else zero on
+ * success.
+ */
+static int regmap_sccb_read(void *context, unsigned int reg, unsigned int *val)
+{
+ struct device *dev = context;
+ struct i2c_client *i2c = to_i2c_client(dev);
+ int ret;
+ union i2c_smbus_data data;
+
+ i2c_lock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
+
+ ret = __i2c_smbus_xfer(i2c->adapter, i2c->addr, i2c->flags,
+ I2C_SMBUS_WRITE, reg, I2C_SMBUS_BYTE, NULL);
+ if (ret < 0)
+ goto out;
+
+ ret = __i2c_smbus_xfer(i2c->adapter, i2c->addr, i2c->flags,
+ I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &data);
+ if (ret < 0)
+ goto out;
+
+ *val = data.byte;
+out:
+ i2c_unlock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
+
+ return ret;
+}
+
+/**
+ * regmap_sccb_write - Write data to SCCB slave device
+ * @context: Device that will be interacted with
+ * @reg: Register to write to
+ * @val: Value to be written
+ *
+ * This executes the SCCB 3-phase write transmission cycle, returning negative
+ * errno else zero on success.
+ */
+static int regmap_sccb_write(void *context, unsigned int reg, unsigned int val)
+{
+ struct device *dev = context;
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ return i2c_smbus_write_byte_data(i2c, reg, val);
+}
+
+static struct regmap_bus regmap_sccb_bus = {
+ .reg_write = regmap_sccb_write,
+ .reg_read = regmap_sccb_read,
+};
+
+static const struct regmap_bus *regmap_get_sccb_bus(struct i2c_client *i2c,
+ const struct regmap_config *config)
+{
+ if (config->val_bits == 8 && config->reg_bits == 8 &&
+ sccb_is_available(i2c->adapter))
+ return &regmap_sccb_bus;
+
+ return ERR_PTR(-ENOTSUPP);
+}
+
+struct regmap *__regmap_init_sccb(struct i2c_client *i2c,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ const struct regmap_bus *bus = regmap_get_sccb_bus(i2c, config);
+
+ if (IS_ERR(bus))
+ return ERR_CAST(bus);
+
+ return __regmap_init(&i2c->dev, bus, &i2c->dev, config,
+ lock_key, lock_name);
+}
+EXPORT_SYMBOL_GPL(__regmap_init_sccb);
+
+struct regmap *__devm_regmap_init_sccb(struct i2c_client *i2c,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ const struct regmap_bus *bus = regmap_get_sccb_bus(i2c, config);
+
+ if (IS_ERR(bus))
+ return ERR_CAST(bus);
+
+ return __devm_regmap_init(&i2c->dev, bus, &i2c->dev, config,
+ lock_key, lock_name);
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_sccb);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/base/regmap/regmap-slimbus.c b/drivers/base/regmap/regmap-slimbus.c
index 91d501eda8a9..0968059f1ef5 100644
--- a/drivers/base/regmap/regmap-slimbus.c
+++ b/drivers/base/regmap/regmap-slimbus.c
@@ -7,33 +7,24 @@
#include "internal.h"
-static int regmap_slimbus_byte_reg_read(void *context, unsigned int reg,
- unsigned int *val)
+static int regmap_slimbus_write(void *context, const void *data, size_t count)
{
struct slim_device *sdev = context;
- int v;
- v = slim_readb(sdev, reg);
-
- if (v < 0)
- return v;
-
- *val = v;
-
- return 0;
+ return slim_write(sdev, *(u16 *)data, count - 2, (u8 *)data + 2);
}
-static int regmap_slimbus_byte_reg_write(void *context, unsigned int reg,
- unsigned int val)
+static int regmap_slimbus_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
{
struct slim_device *sdev = context;
- return slim_writeb(sdev, reg, val);
+ return slim_read(sdev, *(u16 *)reg, val_size, val);
}
static struct regmap_bus regmap_slimbus_bus = {
- .reg_write = regmap_slimbus_byte_reg_write,
- .reg_read = regmap_slimbus_byte_reg_read,
+ .write = regmap_slimbus_write,
+ .read = regmap_slimbus_read,
.reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
.val_format_endian_default = REGMAP_ENDIAN_LITTLE,
};
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 3bc84885eb91..0360a90ad6b6 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -168,6 +168,17 @@ bool regmap_precious(struct regmap *map, unsigned int reg)
return false;
}
+bool regmap_readable_noinc(struct regmap *map, unsigned int reg)
+{
+ if (map->readable_noinc_reg)
+ return map->readable_noinc_reg(map->dev, reg);
+
+ if (map->rd_noinc_table)
+ return regmap_check_range_table(map, reg, map->rd_noinc_table);
+
+ return true;
+}
+
static bool regmap_volatile_range(struct regmap *map, unsigned int reg,
size_t num)
{
@@ -766,10 +777,12 @@ struct regmap *__regmap_init(struct device *dev,
map->rd_table = config->rd_table;
map->volatile_table = config->volatile_table;
map->precious_table = config->precious_table;
+ map->rd_noinc_table = config->rd_noinc_table;
map->writeable_reg = config->writeable_reg;
map->readable_reg = config->readable_reg;
map->volatile_reg = config->volatile_reg;
map->precious_reg = config->precious_reg;
+ map->readable_noinc_reg = config->readable_noinc_reg;
map->cache_type = config->cache_type;
spin_lock_init(&map->async_lock);
@@ -1285,6 +1298,7 @@ int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config)
map->readable_reg = config->readable_reg;
map->volatile_reg = config->volatile_reg;
map->precious_reg = config->precious_reg;
+ map->readable_noinc_reg = config->readable_noinc_reg;
map->cache_type = config->cache_type;
regmap_debugfs_init(map, config->name);
@@ -2564,7 +2578,70 @@ int regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
EXPORT_SYMBOL_GPL(regmap_raw_read);
/**
- * regmap_field_read() - Read a value to a single register field
+ * regmap_noinc_read(): Read data from a register without incrementing the
+ * register number
+ *
+ * @map: Register map to read from
+ * @reg: Register to read from
+ * @val: Pointer to data buffer
+ * @val_len: Length of output buffer in bytes.
+ *
+ * The regmap API usually assumes that bulk bus read operations will read a
+ * range of registers. Some devices have certain registers for which a read
+ * operation read will read from an internal FIFO.
+ *
+ * The target register must be volatile but registers after it can be
+ * completely unrelated cacheable registers.
+ *
+ * This will attempt multiple reads as required to read val_len bytes.
+ *
+ * A value of zero will be returned on success, a negative errno will be
+ * returned in error cases.
+ */
+int regmap_noinc_read(struct regmap *map, unsigned int reg,
+ void *val, size_t val_len)
+{
+ size_t read_len;
+ int ret;
+
+ if (!map->bus)
+ return -EINVAL;
+ if (!map->bus->read)
+ return -ENOTSUPP;
+ if (val_len % map->format.val_bytes)
+ return -EINVAL;
+ if (!IS_ALIGNED(reg, map->reg_stride))
+ return -EINVAL;
+ if (val_len == 0)
+ return -EINVAL;
+
+ map->lock(map->lock_arg);
+
+ if (!regmap_volatile(map, reg) || !regmap_readable_noinc(map, reg)) {
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
+ while (val_len) {
+ if (map->max_raw_read && map->max_raw_read < val_len)
+ read_len = map->max_raw_read;
+ else
+ read_len = val_len;
+ ret = _regmap_raw_read(map, reg, val, read_len);
+ if (ret)
+ goto out_unlock;
+ val = ((u8 *)val) + read_len;
+ val_len -= read_len;
+ }
+
+out_unlock:
+ map->unlock(map->lock_arg);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regmap_noinc_read);
+
+/**
+ * regmap_field_read(): Read a value to a single register field
*
* @field: Register field to read from
* @val: Pointer to store read value
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index 51970bae3c4a..9cd66cabb84f 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -463,7 +463,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
msg[num-1].len++;
}
- status = i2c_transfer(adapter, msg, num);
+ status = __i2c_transfer(adapter, msg, num);
if (status < 0)
goto cleanup;
if (status != num) {
@@ -524,9 +524,24 @@ cleanup:
* This executes an SMBus protocol operation, and returns a negative
* errno code else zero on success.
*/
-s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
- char read_write, u8 command, int protocol,
- union i2c_smbus_data *data)
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int protocol, union i2c_smbus_data *data)
+{
+ s32 res;
+
+ i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
+ res = __i2c_smbus_xfer(adapter, addr, flags, read_write,
+ command, protocol, data);
+ i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
+
+ return res;
+}
+EXPORT_SYMBOL(i2c_smbus_xfer);
+
+s32 __i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int protocol, union i2c_smbus_data *data)
{
unsigned long orig_jiffies;
int try;
@@ -543,8 +558,6 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
if (adapter->algo->smbus_xfer) {
- i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
-
/* Retry automatically on arbitration loss */
orig_jiffies = jiffies;
for (res = 0, try = 0; try <= adapter->retries; try++) {
@@ -557,7 +570,6 @@ s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
orig_jiffies + adapter->timeout))
break;
}
- i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
goto trace;
@@ -579,7 +591,7 @@ trace:
return res;
}
-EXPORT_SYMBOL(i2c_smbus_xfer);
+EXPORT_SYMBOL(__i2c_smbus_xfer);
/**
* i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 254cd34eeae2..465afb092fa7 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -140,9 +140,14 @@ extern int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
and probably just as fast.
Note that we use i2c_adapter here, because you do not need a specific
smbus adapter to call this function. */
-extern s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
- unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data *data);
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int protocol, union i2c_smbus_data *data);
+
+/* Unlocked flavor */
+s32 __i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int protocol, union i2c_smbus_data *data);
/* Now follow the 'nice' access routines. These also document the calling
conventions of i2c_smbus_xfer. */
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 4f38068ffb71..379505a53722 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -268,6 +268,13 @@ typedef void (*regmap_unlock)(void *);
* field is NULL but precious_table (see below) is not, the
* check is performed on such table (a register is precious if
* it belongs to one of the ranges specified by precious_table).
+ * @readable_noinc_reg: Optional callback returning true if the register
+ * supports multiple read operations without incrementing
+ * the register number. If this field is NULL but
+ * rd_noinc_table (see below) is not, the check is
+ * performed on such table (a register is no increment
+ * readable if it belongs to one of the ranges specified
+ * by rd_noinc_table).
* @disable_locking: This regmap is either protected by external means or
* is guaranteed not be be accessed from multiple threads.
* Don't use any locking mechanisms.
@@ -295,6 +302,7 @@ typedef void (*regmap_unlock)(void *);
* @rd_table: As above, for read access.
* @volatile_table: As above, for volatile registers.
* @precious_table: As above, for precious registers.
+ * @rd_noinc_table: As above, for no increment readable registers.
* @reg_defaults: Power on reset values for registers (for use with
* register cache support).
* @num_reg_defaults: Number of elements in reg_defaults.
@@ -344,6 +352,7 @@ struct regmap_config {
bool (*readable_reg)(struct device *dev, unsigned int reg);
bool (*volatile_reg)(struct device *dev, unsigned int reg);
bool (*precious_reg)(struct device *dev, unsigned int reg);
+ bool (*readable_noinc_reg)(struct device *dev, unsigned int reg);
bool disable_locking;
regmap_lock lock;
@@ -360,6 +369,7 @@ struct regmap_config {
const struct regmap_access_table *rd_table;
const struct regmap_access_table *volatile_table;
const struct regmap_access_table *precious_table;
+ const struct regmap_access_table *rd_noinc_table;
const struct reg_default *reg_defaults;
unsigned int num_reg_defaults;
enum regcache_type cache_type;
@@ -514,6 +524,10 @@ struct regmap *__regmap_init_i2c(struct i2c_client *i2c,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name);
+struct regmap *__regmap_init_sccb(struct i2c_client *i2c,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
struct regmap *__regmap_init_slimbus(struct slim_device *slimbus,
const struct regmap_config *config,
struct lock_class_key *lock_key,
@@ -558,6 +572,10 @@ struct regmap *__devm_regmap_init_i2c(struct i2c_client *i2c,
const struct regmap_config *config,
struct lock_class_key *lock_key,
const char *lock_name);
+struct regmap *__devm_regmap_init_sccb(struct i2c_client *i2c,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name);
struct regmap *__devm_regmap_init_spi(struct spi_device *dev,
const struct regmap_config *config,
struct lock_class_key *lock_key,
@@ -646,6 +664,19 @@ int regmap_attach_dev(struct device *dev, struct regmap *map,
i2c, config)
/**
+ * regmap_init_sccb() - Initialise register map
+ *
+ * @i2c: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_sccb(i2c, config) \
+ __regmap_lockdep_wrapper(__regmap_init_sccb, #config, \
+ i2c, config)
+
+/**
* regmap_init_slimbus() - Initialise register map
*
* @slimbus: Device that will be interacted with
@@ -798,6 +829,20 @@ bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
i2c, config)
/**
+ * devm_regmap_init_sccb() - Initialise managed register map
+ *
+ * @i2c: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+#define devm_regmap_init_sccb(i2c, config) \
+ __regmap_lockdep_wrapper(__devm_regmap_init_sccb, #config, \
+ i2c, config)
+
+/**
* devm_regmap_init_spi() - Initialise register map
*
* @dev: Device that will be interacted with
@@ -946,6 +991,8 @@ int regmap_raw_write_async(struct regmap *map, unsigned int reg,
int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val);
int regmap_raw_read(struct regmap *map, unsigned int reg,
void *val, size_t val_len);
+int regmap_noinc_read(struct regmap *map, unsigned int reg,
+ void *val, size_t val_len);
int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
size_t val_count);
int regmap_update_bits_base(struct regmap *map, unsigned int reg,
@@ -1196,6 +1243,13 @@ static inline int regmap_raw_read(struct regmap *map, unsigned int reg,
return -EINVAL;
}
+static inline int regmap_noinc_read(struct regmap *map, unsigned int reg,
+ void *val, size_t val_len)
+{
+ WARN_ONCE(1, "regmap API is disabled");
+ return -EINVAL;
+}
+
static inline int regmap_bulk_read(struct regmap *map, unsigned int reg,
void *val, size_t val_count)
{