summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/bonding.txt29
-rw-r--r--Documentation/networking/scaling.txt371
-rw-r--r--drivers/net/bnx2x/bnx2x_cmn.c35
-rw-r--r--drivers/net/bnx2x/bnx2x_dcb.c2
-rw-r--r--drivers/net/bnx2x/bnx2x_main.c23
-rw-r--r--drivers/net/bnx2x/bnx2x_reg.h26
-rw-r--r--drivers/net/can/slcan.c2
-rw-r--r--drivers/net/e1000e/82571.c6
-rw-r--r--drivers/net/e1000e/e1000.h1
-rw-r--r--drivers/net/e1000e/ethtool.c3
-rw-r--r--drivers/net/e1000e/lib.c7
-rw-r--r--drivers/net/e1000e/netdev.c9
-rw-r--r--drivers/net/gianfar_ptp.c9
-rw-r--r--drivers/net/irda/sh_irda.c2
-rw-r--r--drivers/net/irda/sh_sir.c4
-rw-r--r--drivers/net/pcnet32.c2
-rw-r--r--drivers/net/phy/dp83640.c5
-rw-r--r--drivers/net/slip.c2
-rw-r--r--drivers/net/usb/rtl8150.c1
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c23
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_eeprom.c8
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_phy.h2
-rw-r--r--drivers/net/wireless/b43/dma.c20
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c1
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/sw.c11
-rw-r--r--drivers/net/wireless/wl1251/acx.c6
-rw-r--r--drivers/net/wireless/wl1251/cmd.c2
-rw-r--r--fs/compat_ioctl.c1
-rw-r--r--include/linux/netlink.h2
-rw-r--r--include/linux/socket.h6
-rw-r--r--include/net/inet_sock.h2
-rw-r--r--net/bridge/br_if.c6
-rw-r--r--net/bridge/br_notify.c7
-rw-r--r--net/bridge/netfilter/ebtables.c3
-rw-r--r--net/core/scm.c2
-rw-r--r--net/ipv4/ip_output.c1
-rw-r--r--net/ipv4/ip_sockglue.c9
-rw-r--r--net/ipv4/netfilter.c18
-rw-r--r--net/ipv4/raw.c3
-rw-r--r--net/ipv4/route.c9
-rw-r--r--net/ipv4/syncookies.c2
-rw-r--r--net/ipv6/syncookies.c2
-rw-r--r--net/netfilter/nf_queue.c1
-rw-r--r--net/netlabel/netlabel_kapi.c20
-rw-r--r--net/sched/sch_prio.c2
46 files changed, 604 insertions, 106 deletions
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 5dd960d75174..91df678fb7f8 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -238,6 +238,18 @@ ad_select
This option was added in bonding version 3.4.0.
+all_slaves_active
+
+ Specifies that duplicate frames (received on inactive ports) should be
+ dropped (0) or delivered (1).
+
+ Normally, bonding will drop duplicate frames (received on inactive
+ ports), which is desirable for most users. But there are some times
+ it is nice to allow duplicate frames to be delivered.
+
+ The default value is 0 (drop duplicate frames received on inactive
+ ports).
+
arp_interval
Specifies the ARP link monitoring frequency in milliseconds.
@@ -433,6 +445,23 @@ miimon
determined. See the High Availability section for additional
information. The default value is 0.
+min_links
+
+ Specifies the minimum number of links that must be active before
+ asserting carrier. It is similar to the Cisco EtherChannel min-links
+ feature. This allows setting the minimum number of member ports that
+ must be up (link-up state) before marking the bond device as up
+ (carrier on). This is useful for situations where higher level services
+ such as clustering want to ensure a minimum number of low bandwidth
+ links are active before switchover. This option only affect 802.3ad
+ mode.
+
+ The default value is 0. This will cause carrier to be asserted (for
+ 802.3ad mode) whenever there is an active aggregator, regardless of the
+ number of available links in that aggregator. Note that, because an
+ aggregator cannot be active without at least one available link,
+ setting this option to 0 or to 1 has the exact same effect.
+
mode
Specifies one of the bonding policies. The default is
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
new file mode 100644
index 000000000000..7254b4b5910e
--- /dev/null
+++ b/Documentation/networking/scaling.txt
@@ -0,0 +1,371 @@
+Scaling in the Linux Networking Stack
+
+
+Introduction
+============
+
+This document describes a set of complementary techniques in the Linux
+networking stack to increase parallelism and improve performance for
+multi-processor systems.
+
+The following technologies are described:
+
+ RSS: Receive Side Scaling
+ RPS: Receive Packet Steering
+ RFS: Receive Flow Steering
+ Accelerated Receive Flow Steering
+ XPS: Transmit Packet Steering
+
+
+RSS: Receive Side Scaling
+=========================
+
+Contemporary NICs support multiple receive and transmit descriptor queues
+(multi-queue). On reception, a NIC can send different packets to different
+queues to distribute processing among CPUs. The NIC distributes packets by
+applying a filter to each packet that assigns it to one of a small number
+of logical flows. Packets for each flow are steered to a separate receive
+queue, which in turn can be processed by separate CPUs. This mechanism is
+generally known as “Receive-side Scaling” (RSS). The goal of RSS and
+the other scaling techniques to increase performance uniformly.
+Multi-queue distribution can also be used for traffic prioritization, but
+that is not the focus of these techniques.
+
+The filter used in RSS is typically a hash function over the network
+and/or transport layer headers-- for example, a 4-tuple hash over
+IP addresses and TCP ports of a packet. The most common hardware
+implementation of RSS uses a 128-entry indirection table where each entry
+stores a queue number. The receive queue for a packet is determined
+by masking out the low order seven bits of the computed hash for the
+packet (usually a Toeplitz hash), taking this number as a key into the
+indirection table and reading the corresponding value.
+
+Some advanced NICs allow steering packets to queues based on
+programmable filters. For example, webserver bound TCP port 80 packets
+can be directed to their own receive queue. Such “n-tuple” filters can
+be configured from ethtool (--config-ntuple).
+
+==== RSS Configuration
+
+The driver for a multi-queue capable NIC typically provides a kernel
+module parameter for specifying the number of hardware queues to
+configure. In the bnx2x driver, for instance, this parameter is called
+num_queues. A typical RSS configuration would be to have one receive queue
+for each CPU if the device supports enough queues, or otherwise at least
+one for each cache domain at a particular cache level (L1, L2, etc.).
+
+The indirection table of an RSS device, which resolves a queue by masked
+hash, is usually programmed by the driver at initialization. The
+default mapping is to distribute the queues evenly in the table, but the
+indirection table can be retrieved and modified at runtime using ethtool
+commands (--show-rxfh-indir and --set-rxfh-indir). Modifying the
+indirection table could be done to give different queues different
+relative weights.
+
+== RSS IRQ Configuration
+
+Each receive queue has a separate IRQ associated with it. The NIC triggers
+this to notify a CPU when new packets arrive on the given queue. The
+signaling path for PCIe devices uses message signaled interrupts (MSI-X),
+that can route each interrupt to a particular CPU. The active mapping
+of queues to IRQs can be determined from /proc/interrupts. By default,
+an IRQ may be handled on any CPU. Because a non-negligible part of packet
+processing takes place in receive interrupt handling, it is advantageous
+to spread receive interrupts between CPUs. To manually adjust the IRQ
+affinity of each interrupt see Documentation/IRQ-affinity. Some systems
+will be running irqbalance, a daemon that dynamically optimizes IRQ
+assignments and as a result may override any manual settings.
+
+== Suggested Configuration
+
+RSS should be enabled when latency is a concern or whenever receive
+interrupt processing forms a bottleneck. Spreading load between CPUs
+decreases queue length. For low latency networking, the optimal setting
+is to allocate as many queues as there are CPUs in the system (or the
+NIC maximum, if lower). Because the aggregate number of interrupts grows
+with each additional queue, the most efficient high-rate configuration
+is likely the one with the smallest number of receive queues where no
+CPU that processes receive interrupts reaches 100% utilization. Per-cpu
+load can be observed using the mpstat utility.
+
+
+RPS: Receive Packet Steering
+============================
+
+Receive Packet Steering (RPS) is logically a software implementation of
+RSS. Being in software, it is necessarily called later in the datapath.
+Whereas RSS selects the queue and hence CPU that will run the hardware
+interrupt handler, RPS selects the CPU to perform protocol processing
+above the interrupt handler. This is accomplished by placing the packet
+on the desired CPU’s backlog queue and waking up the CPU for processing.
+RPS has some advantages over RSS: 1) it can be used with any NIC,
+2) software filters can easily be added to hash over new protocols,
+3) it does not increase hardware device interrupt rate (although it does
+introduce inter-processor interrupts (IPIs)).
+
+RPS is called during bottom half of the receive interrupt handler, when
+a driver sends a packet up the network stack with netif_rx() or
+netif_receive_skb(). These call the get_rps_cpu() function, which
+selects the queue that should process a packet.
+
+The first step in determining the target CPU for RPS is to calculate a
+flow hash over the packet’s addresses or ports (2-tuple or 4-tuple hash
+depending on the protocol). This serves as a consistent hash of the
+associated flow of the packet. The hash is either provided by hardware
+or will be computed in the stack. Capable hardware can pass the hash in
+the receive descriptor for the packet; this would usually be the same
+hash used for RSS (e.g. computed Toeplitz hash). The hash is saved in
+skb->rx_hash and can be used elsewhere in the stack as a hash of the
+packet’s flow.
+
+Each receive hardware queue has an associated list of CPUs to which
+RPS may enqueue packets for processing. For each received packet,
+an index into the list is computed from the flow hash modulo the size
+of the list. The indexed CPU is the target for processing the packet,
+and the packet is queued to the tail of that CPU’s backlog queue. At
+the end of the bottom half routine, IPIs are sent to any CPUs for which
+packets have been queued to their backlog queue. The IPI wakes backlog
+processing on the remote CPU, and any queued packets are then processed
+up the networking stack.
+
+==== RPS Configuration
+
+RPS requires a kernel compiled with the CONFIG_RPS kconfig symbol (on
+by default for SMP). Even when compiled in, RPS remains disabled until
+explicitly configured. The list of CPUs to which RPS may forward traffic
+can be configured for each receive queue using a sysfs file entry:
+
+ /sys/class/net/<dev>/queues/rx-<n>/rps_cpus
+
+This file implements a bitmap of CPUs. RPS is disabled when it is zero
+(the default), in which case packets are processed on the interrupting
+CPU. Documentation/IRQ-affinity.txt explains how CPUs are assigned to
+the bitmap.
+
+== Suggested Configuration
+
+For a single queue device, a typical RPS configuration would be to set
+the rps_cpus to the CPUs in the same cache domain of the interrupting
+CPU. If NUMA locality is not an issue, this could also be all CPUs in
+the system. At high interrupt rate, it might be wise to exclude the
+interrupting CPU from the map since that already performs much work.
+
+For a multi-queue system, if RSS is configured so that a hardware
+receive queue is mapped to each CPU, then RPS is probably redundant
+and unnecessary. If there are fewer hardware queues than CPUs, then
+RPS might be beneficial if the rps_cpus for each queue are the ones that
+share the same cache domain as the interrupting CPU for that queue.
+
+
+RFS: Receive Flow Steering
+==========================
+
+While RPS steers packets solely based on hash, and thus generally
+provides good load distribution, it does not take into account
+application locality. This is accomplished by Receive Flow Steering
+(RFS). The goal of RFS is to increase datacache hitrate by steering
+kernel processing of packets to the CPU where the application thread
+consuming the packet is running. RFS relies on the same RPS mechanisms
+to enqueue packets onto the backlog of another CPU and to wake up that
+CPU.
+
+In RFS, packets are not forwarded directly by the value of their hash,
+but the hash is used as index into a flow lookup table. This table maps
+flows to the CPUs where those flows are being processed. The flow hash
+(see RPS section above) is used to calculate the index into this table.
+The CPU recorded in each entry is the one which last processed the flow.
+If an entry does not hold a valid CPU, then packets mapped to that entry
+are steered using plain RPS. Multiple table entries may point to the
+same CPU. Indeed, with many flows and few CPUs, it is very likely that
+a single application thread handles flows with many different flow hashes.
+
+rps_sock_table is a global flow table that contains the *desired* CPU for
+flows: the CPU that is currently processing the flow in userspace. Each
+table value is a CPU index that is updated during calls to recvmsg and
+sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
+and tcp_splice_read()).
+
+When the scheduler moves a thread to a new CPU while it has outstanding
+receive packets on the old CPU, packets may arrive out of order. To
+avoid this, RFS uses a second flow table to track outstanding packets
+for each flow: rps_dev_flow_table is a table specific to each hardware
+receive queue of each device. Each table value stores a CPU index and a
+counter. The CPU index represents the *current* CPU onto which packets
+for this flow are enqueued for further kernel processing. Ideally, kernel
+and userspace processing occur on the same CPU, and hence the CPU index
+in both tables is identical. This is likely false if the scheduler has
+recently migrated a userspace thread while the kernel still has packets
+enqueued for kernel processing on the old CPU.
+
+The counter in rps_dev_flow_table values records the length of the current
+CPU's backlog when a packet in this flow was last enqueued. Each backlog
+queue has a head counter that is incremented on dequeue. A tail counter
+is computed as head counter + queue length. In other words, the counter
+in rps_dev_flow_table[i] records the last element in flow i that has
+been enqueued onto the currently designated CPU for flow i (of course,
+entry i is actually selected by hash and multiple flows may hash to the
+same entry i).
+
+And now the trick for avoiding out of order packets: when selecting the
+CPU for packet processing (from get_rps_cpu()) the rps_sock_flow table
+and the rps_dev_flow table of the queue that the packet was received on
+are compared. If the desired CPU for the flow (found in the
+rps_sock_flow table) matches the current CPU (found in the rps_dev_flow
+table), the packet is enqueued onto that CPU’s backlog. If they differ,
+the current CPU is updated to match the desired CPU if one of the
+following is true:
+
+- The current CPU's queue head counter >= the recorded tail counter
+ value in rps_dev_flow[i]
+- The current CPU is unset (equal to NR_CPUS)
+- The current CPU is offline
+
+After this check, the packet is sent to the (possibly updated) current
+CPU. These rules aim to ensure that a flow only moves to a new CPU when
+there are no packets outstanding on the old CPU, as the outstanding
+packets could arrive later than those about to be processed on the new
+CPU.
+
+==== RFS Configuration
+
+RFS is only available if the kconfig symbol CONFIG_RFS is enabled (on
+by default for SMP). The functionality remains disabled until explicitly
+configured. The number of entries in the global flow table is set through:
+
+ /proc/sys/net/core/rps_sock_flow_entries
+
+The number of entries in the per-queue flow table are set through:
+
+ /sys/class/net/<dev>/queues/tx-<n>/rps_flow_cnt
+
+== Suggested Configuration
+
+Both of these need to be set before RFS is enabled for a receive queue.
+Values for both are rounded up to the nearest power of two. The
+suggested flow count depends on the expected number of active connections
+at any given time, which may be significantly less than the number of open
+connections. We have found that a value of 32768 for rps_sock_flow_entries
+works fairly well on a moderately loaded server.
+
+For a single queue device, the rps_flow_cnt value for the single queue
+would normally be configured to the same value as rps_sock_flow_entries.
+For a multi-queue device, the rps_flow_cnt for each queue might be
+configured as rps_sock_flow_entries / N, where N is the number of
+queues. So for instance, if rps_flow_entries is set to 32768 and there
+are 16 configured receive queues, rps_flow_cnt for each queue might be
+configured as 2048.
+
+
+Accelerated RFS
+===============
+
+Accelerated RFS is to RFS what RSS is to RPS: a hardware-accelerated load
+balancing mechanism that uses soft state to steer flows based on where
+the application thread consuming the packets of each flow is running.
+Accelerated RFS should perform better than RFS since packets are sent
+directly to a CPU local to the thread consuming the data. The target CPU
+will either be the same CPU where the application runs, or at least a CPU
+which is local to the application thread’s CPU in the cache hierarchy.
+
+To enable accelerated RFS, the networking stack calls the
+ndo_rx_flow_steer driver function to communicate the desired hardware
+queue for packets matching a particular flow. The network stack
+automatically calls this function every time a flow entry in
+rps_dev_flow_table is updated. The driver in turn uses a device specific
+method to program the NIC to steer the packets.
+
+The hardware queue for a flow is derived from the CPU recorded in
+rps_dev_flow_table. The stack consults a CPU to hardware queue map which
+is maintained by the NIC driver. This is an auto-generated reverse map of
+the IRQ affinity table shown by /proc/interrupts. Drivers can use
+functions in the cpu_rmap (“CPU affinity reverse map”) kernel library
+to populate the map. For each CPU, the corresponding queue in the map is
+set to be one whose processing CPU is closest in cache locality.
+
+==== Accelerated RFS Configuration
+
+Accelerated RFS is only available if the kernel is compiled with
+CONFIG_RFS_ACCEL and support is provided by the NIC device and driver.
+It also requires that ntuple filtering is enabled via ethtool. The map
+of CPU to queues is automatically deduced from the IRQ affinities
+configured for each receive queue by the driver, so no additional
+configuration should be necessary.
+
+== Suggested Configuration
+
+This technique should be enabled whenever one wants to use RFS and the
+NIC supports hardware acceleration.
+
+XPS: Transmit Packet Steering
+=============================
+
+Transmit Packet Steering is a mechanism for intelligently selecting
+which transmit queue to use when transmitting a packet on a multi-queue
+device. To accomplish this, a mapping from CPU to hardware queue(s) is
+recorded. The goal of this mapping is usually to assign queues
+exclusively to a subset of CPUs, where the transmit completions for
+these queues are processed on a CPU within this set. This choice
+provides two benefits. First, contention on the device queue lock is
+significantly reduced since fewer CPUs contend for the same queue
+(contention can be eliminated completely if each CPU has its own
+transmit queue). Secondly, cache miss rate on transmit completion is
+reduced, in particular for data cache lines that hold the sk_buff
+structures.
+
+XPS is configured per transmit queue by setting a bitmap of CPUs that
+may use that queue to transmit. The reverse mapping, from CPUs to
+transmit queues, is computed and maintained for each network device.
+When transmitting the first packet in a flow, the function
+get_xps_queue() is called to select a queue. This function uses the ID
+of the running CPU as a key into the CPU-to-queue lookup table. If the
+ID matches a single queue, that is used for transmission. If multiple
+queues match, one is selected by using the flow hash to compute an index
+into the set.
+
+The queue chosen for transmitting a particular flow is saved in the
+corresponding socket structure for the flow (e.g. a TCP connection).
+This transmit queue is used for subsequent packets sent on the flow to
+prevent out of order (ooo) packets. The choice also amortizes the cost
+of calling get_xps_queues() over all packets in the connection. To avoid
+ooo packets, the queue for a flow can subsequently only be changed if
+skb->ooo_okay is set for a packet in the flow. This flag indicates that
+there are no outstanding packets in the flow, so the transmit queue can
+change without the risk of generating out of order packets. The
+transport layer is responsible for setting ooo_okay appropriately. TCP,
+for instance, sets the flag when all data for a connection has been
+acknowledged.
+
+==== XPS Configuration
+
+XPS is only available if the kconfig symbol CONFIG_XPS is enabled (on by
+default for SMP). The functionality remains disabled until explicitly
+configured. To enable XPS, the bitmap of CPUs that may use a transmit
+queue is configured using the sysfs file entry:
+
+/sys/class/net/<dev>/queues/tx-<n>/xps_cpus
+
+== Suggested Configuration
+
+For a network device with a single transmission queue, XPS configuration
+has no effect, since there is no choice in this case. In a multi-queue
+system, XPS is preferably configured so that each CPU maps onto one queue.
+If there are as many queues as there are CPUs in the system, then each
+queue can also map onto one CPU, resulting in exclusive pairings that
+experience no contention. If there are fewer queues than CPUs, then the
+best CPUs to share a given queue are probably those that share the cache
+with the CPU that processes transmit completions for that queue
+(transmit interrupts).
+
+
+Further Information
+===================
+RPS and RFS were introduced in kernel 2.6.35. XPS was incorporated into
+2.6.38. Original patches were submitted by Tom Herbert
+(therbert@google.com)
+
+Accelerated RFS was introduced in 2.6.35. Original patches were
+submitted by Ben Hutchings (bhutchings@solarflare.com)
+
+Authors:
+Tom Herbert (therbert@google.com)
+Willem de Bruijn (willemb@google.com)
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index d724a18b5285..37e5790681ad 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -63,8 +63,9 @@ static inline void bnx2x_bz_fp(struct bnx2x *bp, int index)
fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0);
#ifdef BCM_CNIC
- /* We don't want TPA on FCoE, FWD and OOO L2 rings */
- bnx2x_fcoe(bp, disable_tpa) = 1;
+ /* We don't want TPA on an FCoE L2 ring */
+ if (IS_FCOE_FP(fp))
+ fp->disable_tpa = 1;
#endif
}
@@ -1404,10 +1405,9 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
{
struct bnx2x *bp = netdev_priv(dev);
+
#ifdef BCM_CNIC
- if (NO_FCOE(bp))
- return skb_tx_hash(dev, skb);
- else {
+ if (!NO_FCOE(bp)) {
struct ethhdr *hdr = (struct ethhdr *)skb->data;
u16 ether_type = ntohs(hdr->h_proto);
@@ -1424,8 +1424,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
return bnx2x_fcoe_tx(bp, txq_index);
}
#endif
- /* Select a none-FCoE queue: if FCoE is enabled, exclude FCoE L2 ring
- */
+ /* select a non-FCoE queue */
return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp));
}
@@ -1448,6 +1447,28 @@ void bnx2x_set_num_queues(struct bnx2x *bp)
bp->num_queues += NON_ETH_CONTEXT_USE;
}
+/**
+ * bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues
+ *
+ * @bp: Driver handle
+ *
+ * We currently support for at most 16 Tx queues for each CoS thus we will
+ * allocate a multiple of 16 for ETH L2 rings according to the value of the
+ * bp->max_cos.
+ *
+ * If there is an FCoE L2 queue the appropriate Tx queue will have the next
+ * index after all ETH L2 indices.
+ *
+ * If the actual number of Tx queues (for each CoS) is less than 16 then there
+ * will be the holes at the end of each group of 16 ETh L2 indices (0..15,
+ * 16..31,...) with indicies that are not coupled with any real Tx queue.
+ *
+ * The proper configuration of skb->queue_mapping is handled by
+ * bnx2x_select_queue() and __skb_tx_hash().
+ *
+ * bnx2x_setup_tc() takes care of the proper TC mappings so that __skb_tx_hash()
+ * will return a proper Tx index if TC is enabled (netdev->num_tc > 0).
+ */
static inline int bnx2x_set_real_num_queues(struct bnx2x *bp)
{
int rc, tx, rx;
diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/bnx2x/bnx2x_dcb.c
index a4ea35f6a456..a1e004a82f7a 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/bnx2x/bnx2x_dcb.c
@@ -920,7 +920,7 @@ static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp,
void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled)
{
- if (!CHIP_IS_E1x(bp)) {
+ if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3(bp)) {
bp->dcb_state = dcb_on;
bp->dcbx_enabled = dcbx_enabled;
} else {
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 150709111548..f74582a22c68 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -5798,6 +5798,12 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_ABS_FUNC(bp));
+ /*
+ * take the UNDI lock to protect undi_unload flow from accessing
+ * registers while we're resetting the chip
+ */
+ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
bnx2x_reset_common(bp);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
@@ -5808,6 +5814,8 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
}
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
+ bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
if (!CHIP_IS_E1x(bp)) {
@@ -10251,10 +10259,17 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
/* clean indirect addresses */
pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
PCICFG_VENDOR_ID_OFFSET);
- REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0 + BP_PORT(bp)*16, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0 + BP_PORT(bp)*16, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(bp)*16, 0);
- REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(bp)*16, 0);
+ /* Clean the following indirect addresses for all functions since it
+ * is not used by the driver.
+ */
+ REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
+ REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
/*
* Enable internal target-read (in case we are probed after PF FLR).
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 27b5ecb11830..40266c14e6dc 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -3007,11 +3007,27 @@
/* [R 6] Debug only: Number of used entries in the data FIFO */
#define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c
/* [R 7] Debug only: Number of used entries in the header FIFO */
-#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
-#define PXP2_REG_PGL_ADDR_88_F0 0x120534
-#define PXP2_REG_PGL_ADDR_8C_F0 0x120538
-#define PXP2_REG_PGL_ADDR_90_F0 0x12053c
-#define PXP2_REG_PGL_ADDR_94_F0 0x120540
+#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
+#define PXP2_REG_PGL_ADDR_88_F0 0x120534
+/* [R 32] GRC address for configuration access to PCIE config address 0x88.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register */
+#define PXP2_REG_PGL_ADDR_88_F1 0x120544
+#define PXP2_REG_PGL_ADDR_8C_F0 0x120538
+/* [R 32] GRC address for configuration access to PCIE config address 0x8c.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register */
+#define PXP2_REG_PGL_ADDR_8C_F1 0x120548
+#define PXP2_REG_PGL_ADDR_90_F0 0x12053c
+/* [R 32] GRC address for configuration access to PCIE config address 0x90.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register */
+#define PXP2_REG_PGL_ADDR_90_F1 0x12054c
+#define PXP2_REG_PGL_ADDR_94_F0 0x120540
+/* [R 32] GRC address for configuration access to PCIE config address 0x94.
+ * any write to this PCIE address will cause a GRC write access to the
+ * address that's in t this register */
+#define PXP2_REG_PGL_ADDR_94_F1 0x120550
#define PXP2_REG_PGL_CONTROL0 0x120490
#define PXP2_REG_PGL_CONTROL1 0x120514
#define PXP2_REG_PGL_DEBUG 0x120520
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index f523f1cc5142..4b70b7e8bdeb 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -197,7 +197,7 @@ static void slc_bump(struct slcan *sl)
skb->ip_summed = CHECKSUM_UNNECESSARY;
memcpy(skb_put(skb, sizeof(struct can_frame)),
&cf, sizeof(struct can_frame));
- netif_rx(skb);
+ netif_rx_ni(skb);
sl->dev->stats.rx_packets++;
sl->dev->stats.rx_bytes += cf.can_dlc;
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 480f2592f8a5..536b3a55c45f 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -2085,7 +2085,8 @@ struct e1000_info e1000_82574_info = {
| FLAG_HAS_AMT
| FLAG_HAS_CTRLEXT_ON_LOAD,
.flags2 = FLAG2_CHECK_PHY_HANG
- | FLAG2_DISABLE_ASPM_L0S,
+ | FLAG2_DISABLE_ASPM_L0S
+ | FLAG2_NO_DISABLE_RX,
.pba = 32,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
@@ -2104,7 +2105,8 @@ struct e1000_info e1000_82583_info = {
| FLAG_HAS_AMT
| FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_CTRLEXT_ON_LOAD,
- .flags2 = FLAG2_DISABLE_ASPM_L0S,
+ .flags2 = FLAG2_DISABLE_ASPM_L0S
+ | FLAG2_NO_DISABLE_RX,
.pba = 32,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 638d175792cf..35916f485028 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -453,6 +453,7 @@ struct e1000_info {
#define FLAG2_DISABLE_ASPM_L0S (1 << 7)
#define FLAG2_DISABLE_AIM (1 << 8)
#define FLAG2_CHECK_PHY_HANG (1 << 9)
+#define FLAG2_NO_DISABLE_RX (1 << 10)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 06d88f316dce..6a0526a59a8a 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1206,7 +1206,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
rx_ring->next_to_clean = 0;
rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF));
ew32(RDBAH, ((u64) rx_ring->dma >> 32));
ew32(RDLEN, rx_ring->size);
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 7898a67d6505..0893ab107adf 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -190,7 +190,8 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
/* Check for LOM (vs. NIC) or one of two valid mezzanine cards */
if (!((nvm_data & NVM_COMPAT_LOM) ||
(hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) ||
- (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)))
+ (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES)))
goto out;
ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
@@ -200,10 +201,10 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
goto out;
}
- if (nvm_alt_mac_addr_offset == 0xFFFF) {
+ if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
+ (nvm_alt_mac_addr_offset == 0x0000))
/* There is no Alternate MAC Address */
goto out;
- }
if (hw->bus.func == E1000_FUNC_1)
nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index ab4be80f7ab5..362f70382cdd 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -56,7 +56,7 @@
#define DRV_EXTRAVERSION "-k"
-#define DRV_VERSION "1.3.16" DRV_EXTRAVERSION
+#define DRV_VERSION "1.4.4" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@@ -2915,7 +2915,8 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
/* disable receives while setting up the descriptors */
rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
e1e_flush();
usleep_range(10000, 20000);
@@ -3394,7 +3395,8 @@ void e1000e_down(struct e1000_adapter *adapter)
/* disable receives in the hardware */
rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
/* flush and sleep below */
netif_stop_queue(netdev);
@@ -3403,6 +3405,7 @@ void e1000e_down(struct e1000_adapter *adapter)
tctl = er32(TCTL);
tctl &= ~E1000_TCTL_EN;
ew32(TCTL, tctl);
+
/* flush both disables and wait for them to finish */
e1e_flush();
usleep_range(10000, 20000);
diff --git a/drivers/net/gianfar_ptp.c b/drivers/net/gianfar_ptp.c
index 1c97861596f0..f67b8aebc89c 100644
--- a/drivers/net/gianfar_ptp.c
+++ b/drivers/net/gianfar_ptp.c
@@ -193,14 +193,9 @@ static void set_alarm(struct etsects *etsects)
/* Caller must hold etsects->lock. */
static void set_fipers(struct etsects *etsects)
{
- u32 tmr_ctrl = gfar_read(&etsects->regs->tmr_ctrl);
-
- gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl & (~TE));
- gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc);
+ set_alarm(etsects);
gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
- set_alarm(etsects);
- gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|TE);
}
/*
@@ -511,7 +506,7 @@ static int gianfar_ptp_probe(struct platform_device *dev)
gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
set_alarm(etsects);
- gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FS|RTPE|TE);
+ gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FS|RTPE|TE|FRD);
spin_unlock_irqrestore(&etsects->lock, flags);
diff --git a/drivers/net/irda/sh_irda.c b/drivers/net/irda/sh_irda.c
index 4488bd581eca..82660672dcd9 100644
--- a/drivers/net/irda/sh_irda.c
+++ b/drivers/net/irda/sh_irda.c
@@ -22,6 +22,8 @@
* - DMA transfer support
* - FIFO mode support
*/
+#include <linux/io.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c
index 52a7c86af663..ed7d7d62bf68 100644
--- a/drivers/net/irda/sh_sir.c
+++ b/drivers/net/irda/sh_sir.c
@@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
+#include <linux/io.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -511,7 +513,7 @@ static void sh_sir_tx(struct sh_sir_self *self, int phase)
static int sh_sir_read_data(struct sh_sir_self *self)
{
- u16 val;
+ u16 val = 0;
int timeout = 1024;
while (timeout--) {
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 8b3090dc4bcd..80b6f36a8074 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -82,7 +82,7 @@ static int cards_found;
/*
* VLB I/O addresses
*/
-static unsigned int pcnet32_portlist[] __initdata =
+static unsigned int pcnet32_portlist[] =
{ 0x300, 0x320, 0x340, 0x360, 0 };
static int pcnet32_debug;
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 2cd8dc5847b4..cb6e0b486b1e 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -34,8 +34,7 @@
#define PAGESEL 0x13
#define LAYER4 0x02
#define LAYER2 0x01
-#define MAX_RXTS 4
-#define MAX_TXTS 4
+#define MAX_RXTS 64
#define N_EXT_TS 1
#define PSF_PTPVER 2
#define PSF_EVNT 0x4000
@@ -218,7 +217,7 @@ static void phy2rxts(struct phy_rxts *p, struct rxts *rxts)
rxts->seqid = p->seqid;
rxts->msgtype = (p->msgtype >> 12) & 0xf;
rxts->hash = p->msgtype & 0x0fff;
- rxts->tmo = jiffies + HZ;
+ rxts->tmo = jiffies + 2;
}
static u64 phy2txts(struct phy_txts *p)
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index f11b3f3df24f..4c617534f937 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -367,7 +367,7 @@ static void sl_bump(struct slip *sl)
memcpy(skb_put(skb, count), sl->rbuff, count);
skb_reset_mac_header(skb);
skb->protocol = htons(ETH_P_IP);
- netif_rx(skb);
+ netif_rx_ni(skb);
dev->stats.rx_packets++;
}
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index 041fb7d43c4f..ef3b236b5145 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -977,7 +977,6 @@ static void rtl8150_disconnect(struct usb_interface *intf)
usb_set_intfdata(intf, NULL);
if (dev) {
set_bit(RTL8150_UNPLUG, &dev->flags);
- tasklet_disable(&dev->tl);
tasklet_kill(&dev->tl);
unregister_netdev(dev->netdev);
unlink_all_urbs(dev);
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index f54dff44ed50..c3119a6caace 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1735,6 +1735,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf)
if (dma_mapping_error(ah->dev, bf->skbaddr)) {
ATH5K_ERR(ah, "beacon DMA mapping failed\n");
+ dev_kfree_skb_any(skb);
+ bf->skb = NULL;
return -EIO;
}
@@ -1819,8 +1821,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
ath5k_txbuf_free_skb(ah, avf->bbuf);
avf->bbuf->skb = skb;
ret = ath5k_beacon_setup(ah, avf->bbuf);
- if (ret)
- avf->bbuf->skb = NULL;
out:
return ret;
}
@@ -1840,6 +1840,7 @@ ath5k_beacon_send(struct ath5k_hw *ah)
struct ath5k_vif *avf;
struct ath5k_buf *bf;
struct sk_buff *skb;
+ int err;
ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n");
@@ -1888,11 +1889,6 @@ ath5k_beacon_send(struct ath5k_hw *ah)
avf = (void *)vif->drv_priv;
bf = avf->bbuf;
- if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION ||
- ah->opmode == NL80211_IFTYPE_MONITOR)) {
- ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
- return;
- }
/*
* Stop any current dma and put the new frame on the queue.
@@ -1906,8 +1902,17 @@ ath5k_beacon_send(struct ath5k_hw *ah)
/* refresh the beacon for AP or MESH mode */
if (ah->opmode == NL80211_IFTYPE_AP ||
- ah->opmode == NL80211_IFTYPE_MESH_POINT)
- ath5k_beacon_update(ah->hw, vif);
+ ah->opmode == NL80211_IFTYPE_MESH_POINT) {
+ err = ath5k_beacon_update(ah->hw, vif);
+ if (err)
+ return;
+ }
+
+ if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION ||
+ ah->opmode == NL80211_IFTYPE_MONITOR)) {
+ ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb);
+ return;
+ }
trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index d109c25417f4..c34bef1bf2b0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -307,7 +307,7 @@ static const struct ar9300_eeprom ar9300_default = {
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
- { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+ { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
@@ -884,7 +884,7 @@ static const struct ar9300_eeprom ar9300_x113 = {
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
- { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+ { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
@@ -2040,7 +2040,7 @@ static const struct ar9300_eeprom ar9300_x112 = {
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
- { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+ { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
@@ -3734,7 +3734,7 @@ static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah)
}
} else {
reg_pmu_set = (5 << 1) | (7 << 4) |
- (1 << 8) | (2 << 14) |
+ (2 << 8) | (2 << 14) |
(6 << 17) | (1 << 20) |
(3 << 24) | (1 << 28);
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 6de3f0bc18e6..5c590429f120 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -850,7 +850,7 @@
#define AR_PHY_TPC_11_B1 (AR_SM1_BASE + 0x220)
#define AR_PHY_PDADC_TAB_1 (AR_SM1_BASE + 0x240)
#define AR_PHY_TX_IQCAL_STATUS_B1 (AR_SM1_BASE + 0x48c)
-#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM_BASE + 0x450 + ((_i) << 2))
+#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i) (AR_SM1_BASE + 0x450 + ((_i) << 2))
/*
* Channel 2 Register Map
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 83cba22ac6e8..481e534534eb 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -795,9 +795,23 @@ static u64 supported_dma_mask(struct b43_wldev *dev)
u32 tmp;
u16 mmio_base;
- tmp = b43_read32(dev, SSB_TMSHIGH);
- if (tmp & SSB_TMSHIGH_DMA64)
- return DMA_BIT_MASK(64);
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST);
+ if (tmp & BCMA_IOST_DMA64)
+ return DMA_BIT_MASK(64);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
+ if (tmp & SSB_TMSHIGH_DMA64)
+ return DMA_BIT_MASK(64);
+ break;
+#endif
+ }
+
mmio_base = b43_dmacontroller_base(0, 0);
b43_write32(dev, mmio_base + B43_DMA32_TXCTL, B43_DMA32_TXADDREXT_MASK);
tmp = b43_read32(dev, mmio_base + B43_DMA32_TXCTL);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 507559361d87..939563162fb3 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -921,6 +921,8 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x07d1, 0x3c16) },
/* Draytek */
{ USB_DEVICE(0x07fa, 0x7712) },
+ /* DVICO */
+ { USB_DEVICE(0x0fe9, 0xb307) },
/* Edimax */
{ USB_DEVICE(0x7392, 0x7711) },
{ USB_DEVICE(0x7392, 0x7717) },
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 6a93939f44e8..0baeb894f093 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2420,6 +2420,7 @@ static struct usb_device_id rt73usb_device_table[] = {
/* Buffalo */
{ USB_DEVICE(0x0411, 0x00d8) },
{ USB_DEVICE(0x0411, 0x00d9) },
+ { USB_DEVICE(0x0411, 0x00e6) },
{ USB_DEVICE(0x0411, 0x00f4) },
{ USB_DEVICE(0x0411, 0x0116) },
{ USB_DEVICE(0x0411, 0x0119) },
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 942f7a3969a7..ef63c0df006a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -281,6 +281,8 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817d, rtl92cu_hal_cfg)},
/* 8188CE-VAU USB minCard (b/g mode only) */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817e, rtl92cu_hal_cfg)},
+ /* 8188RU in Alfa AWUS036NHR */
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)},
/* 8188 Combo for BC4 */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)},
@@ -303,20 +305,23 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
/* HP - Lite-On ,8188CUS Slim Combo */
{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
+ {RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
{RTL_USB_DEVICE(0x2001, 0x3308, rtl92cu_hal_cfg)}, /*D-Link - Alpha*/
{RTL_USB_DEVICE(0x2019, 0xab2a, rtl92cu_hal_cfg)}, /*Planex - Abocom*/
{RTL_USB_DEVICE(0x2019, 0xed17, rtl92cu_hal_cfg)}, /*PCI - Edimax*/
{RTL_USB_DEVICE(0x20f4, 0x648b, rtl92cu_hal_cfg)}, /*TRENDnet - Cameo*/
{RTL_USB_DEVICE(0x7392, 0x7811, rtl92cu_hal_cfg)}, /*Edimax - Edimax*/
- {RTL_USB_DEVICE(0x3358, 0x13d3, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/
+ {RTL_USB_DEVICE(0x13d3, 0x3358, rtl92cu_hal_cfg)}, /*Azwave 8188CE-VAU*/
/* Russian customer -Azwave (8188CE-VAU b/g mode only) */
- {RTL_USB_DEVICE(0x3359, 0x13d3, rtl92cu_hal_cfg)},
+ {RTL_USB_DEVICE(0x13d3, 0x3359, rtl92cu_hal_cfg)},
+ {RTL_USB_DEVICE(0x4855, 0x0090, rtl92cu_hal_cfg)}, /* Feixun */
+ {RTL_USB_DEVICE(0x4855, 0x0091, rtl92cu_hal_cfg)}, /* NetweeN-Feixun */
+ {RTL_USB_DEVICE(0x9846, 0x9041, rtl92cu_hal_cfg)}, /* Netgear Cameo */
/****** 8192CU ********/
{RTL_USB_DEVICE(0x0586, 0x341f, rtl92cu_hal_cfg)}, /*Zyxel -Abocom*/
{RTL_USB_DEVICE(0x07aa, 0x0056, rtl92cu_hal_cfg)}, /*ATKK-Gemtek*/
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
- {RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Abocom -Abocom*/
{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
{RTL_USB_DEVICE(0x2001, 0x3309, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
{RTL_USB_DEVICE(0x2001, 0x330a, rtl92cu_hal_cfg)}, /*D-Link-Alpha*/
diff --git a/drivers/net/wireless/wl1251/acx.c b/drivers/net/wireless/wl1251/acx.c
index ef8370edace7..ad87a1ac6462 100644
--- a/drivers/net/wireless/wl1251/acx.c
+++ b/drivers/net/wireless/wl1251/acx.c
@@ -140,8 +140,6 @@ int wl1251_acx_sleep_auth(struct wl1251 *wl, u8 sleep_auth)
auth->sleep_auth = sleep_auth;
ret = wl1251_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
- if (ret < 0)
- return ret;
out:
kfree(auth);
@@ -681,10 +679,8 @@ int wl1251_acx_cca_threshold(struct wl1251 *wl)
ret = wl1251_cmd_configure(wl, ACX_CCA_THRESHOLD,
detection, sizeof(*detection));
- if (ret < 0) {
+ if (ret < 0)
wl1251_warning("failed to set cca threshold: %d", ret);
- return ret;
- }
out:
kfree(detection);
diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c
index 81f164bc4888..d14d69d733a0 100644
--- a/drivers/net/wireless/wl1251/cmd.c
+++ b/drivers/net/wireless/wl1251/cmd.c
@@ -241,7 +241,7 @@ int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable)
if (ret < 0) {
wl1251_error("tx %s cmd for channel %d failed",
enable ? "start" : "stop", channel);
- return ret;
+ goto out;
}
wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 8be086e9abe4..51352de88ef1 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1003,6 +1003,7 @@ COMPATIBLE_IOCTL(PPPIOCCONNECT)
COMPATIBLE_IOCTL(PPPIOCDISCONN)
COMPATIBLE_IOCTL(PPPIOCATTCHAN)
COMPATIBLE_IOCTL(PPPIOCGCHAN)
+COMPATIBLE_IOCTL(PPPIOCGL2TPSTATS)
/* PPPOX */
COMPATIBLE_IOCTL(PPPOEIOCSFWD)
COMPATIBLE_IOCTL(PPPOEIOCDFWD)
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 2e17c5dbdcb8..180540a84d37 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -29,7 +29,7 @@
#define MAX_LINKS 32
struct sockaddr_nl {
- sa_family_t nl_family; /* AF_NETLINK */
+ __kernel_sa_family_t nl_family; /* AF_NETLINK */
unsigned short nl_pad; /* zero */
__u32 nl_pid; /* port ID */
__u32 nl_groups; /* multicast groups mask */
diff --git a/include/linux/socket.h b/include/linux/socket.h
index e17f82266639..d0e77f607a79 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -8,8 +8,10 @@
#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *))
/* Implementation specific desired alignment */
+typedef unsigned short __kernel_sa_family_t;
+
struct __kernel_sockaddr_storage {
- unsigned short ss_family; /* address family */
+ __kernel_sa_family_t ss_family; /* address family */
/* Following field(s) are implementation specific */
char __data[_K_SS_MAXSIZE - sizeof(unsigned short)];
/* space to achieve desired size, */
@@ -35,7 +37,7 @@ struct seq_file;
extern void socket_seq_show(struct seq_file *seq);
#endif
-typedef unsigned short sa_family_t;
+typedef __kernel_sa_family_t sa_family_t;
/*
* 1003.1g requires sa_family_t and that sa_data is char.
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index caaff5f5f39f..b897d6e6d0a5 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -238,7 +238,7 @@ static inline __u8 inet_sk_flowi_flags(const struct sock *sk)
{
__u8 flags = 0;
- if (inet_sk(sk)->transparent)
+ if (inet_sk(sk)->transparent || inet_sk(sk)->hdrincl)
flags |= FLOWI_FLAG_ANYSRC;
if (sk->sk_protocol == IPPROTO_TCP)
flags |= FLOWI_FLAG_PRECOW_METRICS;
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 3176e2e13d9b..2cdf0070419f 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -417,6 +417,7 @@ put_back:
int br_del_if(struct net_bridge *br, struct net_device *dev)
{
struct net_bridge_port *p;
+ bool changed_addr;
p = br_port_get_rtnl(dev);
if (!p || p->br != br)
@@ -425,9 +426,12 @@ int br_del_if(struct net_bridge *br, struct net_device *dev)
del_nbp(p);
spin_lock_bh(&br->lock);
- br_stp_recalculate_bridge_id(br);
+ changed_addr = br_stp_recalculate_bridge_id(br);
spin_unlock_bh(&br->lock);
+ if (changed_addr)
+ call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
+
netdev_update_features(br->dev);
return 0;
diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
index 6545ee9591d1..a76b62135558 100644
--- a/net/bridge/br_notify.c
+++ b/net/bridge/br_notify.c
@@ -34,6 +34,7 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
struct net_device *dev = ptr;
struct net_bridge_port *p;
struct net_bridge *br;
+ bool changed_addr;
int err;
/* register of bridge completed, add sysfs entries */
@@ -57,8 +58,12 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
case NETDEV_CHANGEADDR:
spin_lock_bh(&br->lock);
br_fdb_changeaddr(p, dev->dev_addr);
- br_stp_recalculate_bridge_id(br);
+ changed_addr = br_stp_recalculate_bridge_id(br);
spin_unlock_bh(&br->lock);
+
+ if (changed_addr)
+ call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
+
break;
case NETDEV_CHANGE:
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 2b5ca1a0054d..5864cc491369 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1198,7 +1198,8 @@ ebt_register_table(struct net *net, const struct ebt_table *input_table)
if (table->check && table->check(newinfo, table->valid_hooks)) {
BUGPRINT("The table doesn't like its own initial data, lol\n");
- return ERR_PTR(-EINVAL);
+ ret = -EINVAL;
+ goto free_chainstack;
}
table->private = newinfo;
diff --git a/net/core/scm.c b/net/core/scm.c
index 4c1ef026d695..811b53fb330e 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -192,7 +192,7 @@ int __scm_send(struct socket *sock, struct msghdr *msg, struct scm_cookie *p)
goto error;
cred->uid = cred->euid = p->creds.uid;
- cred->gid = cred->egid = p->creds.uid;
+ cred->gid = cred->egid = p->creds.gid;
put_cred(p->cred);
p->cred = cred;
}
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 77d3eded665a..8c6563361ab5 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -122,6 +122,7 @@ static int ip_dev_loopback_xmit(struct sk_buff *newskb)
newskb->pkt_type = PACKET_LOOPBACK;
newskb->ip_summed = CHECKSUM_UNNECESSARY;
WARN_ON(!skb_dst(newskb));
+ skb_dst_force(newskb);
netif_rx_ni(newskb);
return 0;
}
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index ab0c9efd1efa..8905e92f896a 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1067,7 +1067,7 @@ EXPORT_SYMBOL(compat_ip_setsockopt);
*/
static int do_ip_getsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int __user *optlen)
+ char __user *optval, int __user *optlen, unsigned flags)
{
struct inet_sock *inet = inet_sk(sk);
int val;
@@ -1240,7 +1240,7 @@ static int do_ip_getsockopt(struct sock *sk, int level, int optname,
msg.msg_control = optval;
msg.msg_controllen = len;
- msg.msg_flags = 0;
+ msg.msg_flags = flags;
if (inet->cmsg_flags & IP_CMSG_PKTINFO) {
struct in_pktinfo info;
@@ -1294,7 +1294,7 @@ int ip_getsockopt(struct sock *sk, int level,
{
int err;
- err = do_ip_getsockopt(sk, level, optname, optval, optlen);
+ err = do_ip_getsockopt(sk, level, optname, optval, optlen, 0);
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */
if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS &&
@@ -1327,7 +1327,8 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname,
return compat_mc_getsockopt(sk, level, optname, optval, optlen,
ip_getsockopt);
- err = do_ip_getsockopt(sk, level, optname, optval, optlen);
+ err = do_ip_getsockopt(sk, level, optname, optval, optlen,
+ MSG_CMSG_COMPAT);
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */
diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c
index 2e97e3ec1eb7..929b27bdeb79 100644
--- a/net/ipv4/netfilter.c
+++ b/net/ipv4/netfilter.c
@@ -18,17 +18,15 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
struct rtable *rt;
struct flowi4 fl4 = {};
__be32 saddr = iph->saddr;
- __u8 flags = 0;
+ __u8 flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : 0;
unsigned int hh_len;
- if (!skb->sk && addr_type != RTN_LOCAL) {
- if (addr_type == RTN_UNSPEC)
- addr_type = inet_addr_type(net, saddr);
- if (addr_type == RTN_LOCAL || addr_type == RTN_UNICAST)
- flags |= FLOWI_FLAG_ANYSRC;
- else
- saddr = 0;
- }
+ if (addr_type == RTN_UNSPEC)
+ addr_type = inet_addr_type(net, saddr);
+ if (addr_type == RTN_LOCAL || addr_type == RTN_UNICAST)
+ flags |= FLOWI_FLAG_ANYSRC;
+ else
+ saddr = 0;
/* some non-standard hacks like ipt_REJECT.c:send_reset() can cause
* packets with foreign saddr to appear on the NF_INET_LOCAL_OUT hook.
@@ -38,7 +36,7 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
fl4.flowi4_tos = RT_TOS(iph->tos);
fl4.flowi4_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0;
fl4.flowi4_mark = skb->mark;
- fl4.flowi4_flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : flags;
+ fl4.flowi4_flags = flags;
rt = ip_route_output_key(net, &fl4);
if (IS_ERR(rt))
return -1;
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 1457acb39cec..61714bd52925 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -563,7 +563,8 @@ static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
flowi4_init_output(&fl4, ipc.oif, sk->sk_mark, tos,
RT_SCOPE_UNIVERSE,
inet->hdrincl ? IPPROTO_RAW : sk->sk_protocol,
- FLOWI_FLAG_CAN_SLEEP, daddr, saddr, 0, 0);
+ inet_sk_flowi_flags(sk) | FLOWI_FLAG_CAN_SLEEP,
+ daddr, saddr, 0, 0);
if (!inet->hdrincl) {
err = raw_probe_proto_opt(&fl4, msg);
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index e3dec1c9f09d..075212e41b83 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -722,7 +722,7 @@ static inline bool compare_hash_inputs(const struct rtable *rt1,
{
return ((((__force u32)rt1->rt_key_dst ^ (__force u32)rt2->rt_key_dst) |
((__force u32)rt1->rt_key_src ^ (__force u32)rt2->rt_key_src) |
- (rt1->rt_iif ^ rt2->rt_iif)) == 0);
+ (rt1->rt_route_iif ^ rt2->rt_route_iif)) == 0);
}
static inline int compare_keys(struct rtable *rt1, struct rtable *rt2)
@@ -731,8 +731,8 @@ static inline int compare_keys(struct rtable *rt1, struct rtable *rt2)
((__force u32)rt1->rt_key_src ^ (__force u32)rt2->rt_key_src) |
(rt1->rt_mark ^ rt2->rt_mark) |
(rt1->rt_key_tos ^ rt2->rt_key_tos) |
- (rt1->rt_oif ^ rt2->rt_oif) |
- (rt1->rt_iif ^ rt2->rt_iif)) == 0;
+ (rt1->rt_route_iif ^ rt2->rt_route_iif) |
+ (rt1->rt_oif ^ rt2->rt_oif)) == 0;
}
static inline int compare_netns(struct rtable *rt1, struct rtable *rt2)
@@ -2320,8 +2320,7 @@ int ip_route_input_common(struct sk_buff *skb, __be32 daddr, __be32 saddr,
rth = rcu_dereference(rth->dst.rt_next)) {
if ((((__force u32)rth->rt_key_dst ^ (__force u32)daddr) |
((__force u32)rth->rt_key_src ^ (__force u32)saddr) |
- (rth->rt_iif ^ iif) |
- rth->rt_oif |
+ (rth->rt_route_iif ^ iif) |
(rth->rt_key_tos ^ tos)) == 0 &&
rth->rt_mark == skb->mark &&
net_eq(dev_net(rth->dst.dev), net) &&
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 92bb9434b338..3bc5c8f7c71b 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -276,7 +276,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
int mss;
struct rtable *rt;
__u8 rcv_wscale;
- bool ecn_ok;
+ bool ecn_ok = false;
if (!sysctl_tcp_syncookies || !th->ack || th->rst)
goto out;
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 89d5bf806222..ac838965ff34 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -165,7 +165,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
int mss;
struct dst_entry *dst;
__u8 rcv_wscale;
- bool ecn_ok;
+ bool ecn_ok = false;
if (!sysctl_tcp_syncookies || !th->ack || th->rst)
goto out;
diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index 5b466cd1272f..84d0fd47636a 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -312,6 +312,7 @@ void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict)
}
break;
case NF_STOLEN:
+ break;
default:
kfree_skb(skb);
}
diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c
index 58107d060846..9c24de10a657 100644
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -341,11 +341,11 @@ int netlbl_cfg_cipsov4_map_add(u32 doi,
entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
if (entry == NULL)
- return -ENOMEM;
+ goto out_entry;
if (domain != NULL) {
entry->domain = kstrdup(domain, GFP_ATOMIC);
if (entry->domain == NULL)
- goto cfg_cipsov4_map_add_failure;
+ goto out_domain;
}
if (addr == NULL && mask == NULL) {
@@ -354,13 +354,13 @@ int netlbl_cfg_cipsov4_map_add(u32 doi,
} else if (addr != NULL && mask != NULL) {
addrmap = kzalloc(sizeof(*addrmap), GFP_ATOMIC);
if (addrmap == NULL)
- goto cfg_cipsov4_map_add_failure;
+ goto out_addrmap;
INIT_LIST_HEAD(&addrmap->list4);
INIT_LIST_HEAD(&addrmap->list6);
addrinfo = kzalloc(sizeof(*addrinfo), GFP_ATOMIC);
if (addrinfo == NULL)
- goto cfg_cipsov4_map_add_failure;
+ goto out_addrinfo;
addrinfo->type_def.cipsov4 = doi_def;
addrinfo->type = NETLBL_NLTYPE_CIPSOV4;
addrinfo->list.addr = addr->s_addr & mask->s_addr;
@@ -374,7 +374,7 @@ int netlbl_cfg_cipsov4_map_add(u32 doi,
entry->type = NETLBL_NLTYPE_ADDRSELECT;
} else {
ret_val = -EINVAL;
- goto cfg_cipsov4_map_add_failure;
+ goto out_addrmap;
}
ret_val = netlbl_domhsh_add(entry, audit_info);
@@ -384,11 +384,15 @@ int netlbl_cfg_cipsov4_map_add(u32 doi,
return 0;
cfg_cipsov4_map_add_failure:
- cipso_v4_doi_putdef(doi_def);
+ kfree(addrinfo);
+out_addrinfo:
+ kfree(addrmap);
+out_addrmap:
kfree(entry->domain);
+out_domain:
kfree(entry);
- kfree(addrmap);
- kfree(addrinfo);
+out_entry:
+ cipso_v4_doi_putdef(doi_def);
return ret_val;
}
diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index 2a318f2dc3e5..b5d56a22b1d2 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -112,7 +112,7 @@ static struct sk_buff *prio_dequeue(struct Qdisc *sch)
for (prio = 0; prio < q->bands; prio++) {
struct Qdisc *qdisc = q->queues[prio];
- struct sk_buff *skb = qdisc->dequeue(qdisc);
+ struct sk_buff *skb = qdisc_dequeue_peeked(qdisc);
if (skb) {
qdisc_bstats_update(sch, skb);
sch->q.qlen--;