diff options
32 files changed, 1585 insertions, 439 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt deleted file mode 100644 index 6824b3180ffb..000000000000 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt +++ /dev/null @@ -1,14 +0,0 @@ -Raspberry Pi VideoCore firmware driver - -Required properties: - -- compatible: Should be "raspberrypi,bcm2835-firmware" -- mboxes: Phandle to the firmware device's Mailbox. - (See: ../mailbox/mailbox.txt for more information) - -Example: - -firmware { - compatible = "raspberrypi,bcm2835-firmware"; - mboxes = <&mailbox>; -}; diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml new file mode 100644 index 000000000000..17e4f20c8d39 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raspberry Pi VideoCore firmware driver + +maintainers: + - Eric Anholt <eric@anholt.net> + - Stefan Wahren <wahrenst@gmx.net> + +select: + properties: + compatible: + contains: + const: raspberrypi,bcm2835-firmware + + required: + - compatible + +properties: + compatible: + items: + - const: raspberrypi,bcm2835-firmware + - const: simple-bus + + mboxes: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Phandle to the firmware device's Mailbox. + (See: ../mailbox/mailbox.txt for more information) + + clocks: + type: object + + properties: + compatible: + const: raspberrypi,firmware-clocks + + "#clock-cells": + const: 1 + description: > + The argument is the ID of the clocks contained by the + firmware messages. + + required: + - compatible + - "#clock-cells" + + additionalProperties: false + +required: + - compatible + - mboxes + +examples: + - | + firmware { + compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; + mboxes = <&mailbox>; + + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml new file mode 100644 index 000000000000..08543ecbe35b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2711 HDMI DVP Device Tree Bindings + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + const: brcm,brcm2711-dvp + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + dvp: clock@7ef00000 { + compatible = "brcm,brcm2711-dvp"; + reg = <0x7ef00000 0x10>; + clocks = <&clk_108MHz>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt index 3041657e2f96..3e7ca5530775 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt @@ -3,6 +3,8 @@ Gated Clock Controller Bindings for MIPS based BCM63XX SoCs Required properties: - compatible: must be one of: "brcm,bcm3368-clocks" + "brcm,bcm6318-clocks" + "brcm,bcm6318-ubus-clocks" "brcm,bcm6328-clocks" "brcm,bcm6358-clocks" "brcm,bcm6362-clocks" diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt deleted file mode 100644 index bcff681a4bd0..000000000000 --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt +++ /dev/null @@ -1,92 +0,0 @@ -Binding for IDT VersaClock 5,6 programmable i2c clock generators. - -The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock -generators providing from 3 to 12 output clocks. - -==I2C device node== - -Required properties: -- compatible: shall be one of - "idt,5p49v5923" - "idt,5p49v5925" - "idt,5p49v5933" - "idt,5p49v5935" - "idt,5p49v6901" - "idt,5p49v6965" -- reg: i2c device address, shall be 0x68 or 0x6a. -- #clock-cells: from common clock binding; shall be set to 1. -- clocks: from common clock binding; list of parent clock handles, - - 5p49v5923 and - 5p49v5925 and - 5p49v6901: (required) either or both of XTAL or CLKIN - reference clock. - - 5p49v5933 and - - 5p49v5935: (optional) property not present (internal - Xtal used) or CLKIN reference - clock. -- clock-names: from common clock binding; clock input names, can be - - 5p49v5923 and - 5p49v5925 and - 5p49v6901: (required) either or both of "xin", "clkin". - - 5p49v5933 and - - 5p49v5935: (optional) property not present or "clkin". - -==Mapping between clock specifier and physical pins== - -When referencing the provided clock in the DT using phandle and -clock specifier, the following mapping applies: - -5P49V5923: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT2 - -5P49V5933: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT4 - -5P49V5925 and -5P49V5935: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT2 - 3 -- OUT3 - 4 -- OUT4 - -5P49V6901: - 0 -- OUT0_SEL_I2CB - 1 -- OUT1 - 2 -- OUT2 - 3 -- OUT3 - 4 -- OUT4 - -==Example== - -/* 25MHz reference crystal */ -ref25: ref25m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; -}; - -i2c-master-node { - - /* IDT 5P49V5923 i2c clock generator */ - vc5: clock-generator@6a { - compatible = "idt,5p49v5923"; - reg = <0x6a>; - #clock-cells = <1>; - - /* Connect XIN input to 25MHz reference */ - clocks = <&ref25m>; - clock-names = "xin"; - }; -}; - -/* Consumer referencing the 5P49V5923 pin OUT1 */ -consumer { - ... - clocks = <&vc5 1>; - ... -} diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml new file mode 100644 index 000000000000..3d4e1685cc55 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators + +description: | + The IDT VersaClock 5 and VersaClock 6 are programmable I2C + clock generators providing from 3 to 12 output clocks. + + When referencing the provided clock in the DT using phandle and clock + specifier, the following mapping applies: + + - 5P49V5923: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + + - 5P49V5933: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT4 + + - other parts: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + 3 -- OUT3 + 4 -- OUT4 + +maintainers: + - Luca Ceresoli <luca@lucaceresoli.net> + +properties: + compatible: + enum: + - idt,5p49v5923 + - idt,5p49v5925 + - idt,5p49v5933 + - idt,5p49v5935 + - idt,5p49v6901 + - idt,5p49v6965 + + reg: + description: I2C device address + enum: [ 0x68, 0x6a ] + + '#clock-cells': + const: 1 + +patternProperties: + "^OUT[1-4]$": + type: object + description: + Description of one of the outputs (OUT1..OUT4). See "Clock1 Output + Configuration" in the Versaclock 5/6/6E Family Register Description + and Programming Guide. + properties: + idt,mode: + description: + The output drive mode. Values defined in dt-bindings/clk/versaclock.h + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 6 + idt,voltage-microvolt: + description: The output drive voltage. + enum: [ 1800000, 2500000, 3300000 ] + idt,slew-percent: + description: The Slew rate control for CMOS single-ended. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 80, 85, 90, 100 ] + +required: + - compatible + - reg + - '#clock-cells' + +allOf: + - if: + properties: + compatible: + enum: + - idt,5p49v5933 + - idt,5p49v5935 + then: + # Devices with builtin crystal + optional external input + properties: + clock-names: + const: clkin + clocks: + maxItems: 1 + else: + # Devices without builtin crystal + properties: + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: [ xin, clkin ] + clocks: + minItems: 1 + maxItems: 2 + required: + - clock-names + - clocks + +examples: + - | + #include <dt-bindings/clk/versaclock.h> + + /* 25MHz reference crystal */ + ref25: ref25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + i2c@0 { + reg = <0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + /* IDT 5P49V5923 I2C clock generator */ + vc5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + + /* Connect XIN input to 25MHz reference */ + clocks = <&ref25m>; + clock-names = "xin"; + + OUT1 { + idt,drive-mode = <VC5_CMOSD>; + idt,voltage-microvolts = <1800000>; + idt,slew-percent = <80>; + }; + + OUT4 { + idt,drive-mode = <VC5_LVDS>; + }; + }; + }; + + /* Consumer referencing the 5P49V5923 pin OUT1 */ + consumer { + /* ... */ + clocks = <&vc5 1>; + /* ... */ + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 68f21d46614c..09d6efd1d0d0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8324,8 +8324,9 @@ W: https://github.com/o2genum/ideapad-slidebar F: drivers/input/misc/ideapad_slidebar.c IDT VersaClock 5 CLOCK DRIVER -M: Marek Vasut <marek.vasut@gmail.com> +M: Luca Ceresoli <luca@lucaceresoli.net> S: Maintained +F: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml F: drivers/clk/clk-versaclock5.c IEEE 802.15.4 SUBSYSTEM diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig index 8c83977a7dc4..784f12c72365 100644 --- a/drivers/clk/bcm/Kconfig +++ b/drivers/clk/bcm/Kconfig @@ -1,4 +1,15 @@ # SPDX-License-Identifier: GPL-2.0-only + +config CLK_BCM2711_DVP + tristate "Broadcom BCM2711 DVP support" + depends on ARCH_BCM2835 ||COMPILE_TEST + depends on COMMON_CLK + default ARCH_BCM2835 + select RESET_SIMPLE + help + Enable common clock framework support for the Broadcom BCM2711 + DVP Controller. + config CLK_BCM2835 bool "Broadcom BCM2835 clock support" depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index 0070ddf6cdd2..edb66b44cb27 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o +obj-$(CONFIG_CLK_BCM2711_DVP) += clk-bcm2711-dvp.o obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835.o obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835-aux.o obj-$(CONFIG_CLK_RASPBERRYPI) += clk-raspberrypi.o diff --git a/drivers/clk/bcm/clk-bcm2711-dvp.c b/drivers/clk/bcm/clk-bcm2711-dvp.c new file mode 100644 index 000000000000..8333e20dc9d2 --- /dev/null +++ b/drivers/clk/bcm/clk-bcm2711-dvp.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2020 Cerno + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/reset/reset-simple.h> + +#define DVP_HT_RPI_SW_INIT 0x04 +#define DVP_HT_RPI_MISC_CONFIG 0x08 + +#define NR_CLOCKS 2 +#define NR_RESETS 6 + +struct clk_dvp { + struct clk_hw_onecell_data *data; + struct reset_simple_data reset; +}; + +static const struct clk_parent_data clk_dvp_parent = { + .index = 0, +}; + +static int clk_dvp_probe(struct platform_device *pdev) +{ + struct clk_hw_onecell_data *data; + struct resource *res; + struct clk_dvp *dvp; + void __iomem *base; + int ret; + + dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL); + if (!dvp) + return -ENOMEM; + platform_set_drvdata(pdev, dvp); + + dvp->data = devm_kzalloc(&pdev->dev, + struct_size(dvp->data, hws, NR_CLOCKS), + GFP_KERNEL); + if (!dvp->data) + return -ENOMEM; + data = dvp->data; + + base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(base)) + return PTR_ERR(base); + + dvp->reset.rcdev.owner = THIS_MODULE; + dvp->reset.rcdev.nr_resets = NR_RESETS; + dvp->reset.rcdev.ops = &reset_simple_ops; + dvp->reset.rcdev.of_node = pdev->dev.of_node; + dvp->reset.membase = base + DVP_HT_RPI_SW_INIT; + spin_lock_init(&dvp->reset.lock); + + ret = devm_reset_controller_register(&pdev->dev, &dvp->reset.rcdev); + if (ret) + return ret; + + data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev, + "hdmi0-108MHz", + &clk_dvp_parent, 0, + base + DVP_HT_RPI_MISC_CONFIG, 3, + CLK_GATE_SET_TO_DISABLE, + &dvp->reset.lock); + if (IS_ERR(data->hws[0])) + return PTR_ERR(data->hws[0]); + + data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev, + "hdmi1-108MHz", + &clk_dvp_parent, 0, + base + DVP_HT_RPI_MISC_CONFIG, 4, + CLK_GATE_SET_TO_DISABLE, + &dvp->reset.lock); + if (IS_ERR(data->hws[1])) { + ret = PTR_ERR(data->hws[1]); + goto unregister_clk0; + } + + data->num = NR_CLOCKS; + ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get, + data); + if (ret) + goto unregister_clk1; + + return 0; + +unregister_clk1: + clk_hw_unregister_gate(data->hws[1]); + +unregister_clk0: + clk_hw_unregister_gate(data->hws[0]); + return ret; +}; + +static int clk_dvp_remove(struct platform_device *pdev) +{ + struct clk_dvp *dvp = platform_get_drvdata(pdev); + struct clk_hw_onecell_data *data = dvp->data; + + clk_hw_unregister_gate(data->hws[1]); + clk_hw_unregister_gate(data->hws[0]); + + return 0; +} + +static const struct of_device_id clk_dvp_dt_ids[] = { + { .compatible = "brcm,brcm2711-dvp", }, + { /* sentinel */ } +}; + +static struct platform_driver clk_dvp_driver = { + .probe = clk_dvp_probe, + .remove = clk_dvp_remove, + .driver = { + .name = "brcm2711-dvp", + .of_match_table = clk_dvp_dt_ids, + }, +}; +module_platform_driver(clk_dvp_driver); + +MODULE_AUTHOR("Maxime Ripard <maxime@cerno.tech>"); +MODULE_DESCRIPTION("BCM2711 DVP clock driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 6bb7efa12037..3439bc65bb4e 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -314,6 +314,7 @@ struct bcm2835_cprman { struct device *dev; void __iomem *regs; spinlock_t regs_lock; /* spinlock for all clocks */ + unsigned int soc; /* * Real names of cprman clock parents looked up through @@ -421,6 +422,7 @@ struct bcm2835_pll_data { u32 reference_enable_mask; /* Bit in CM_LOCK to indicate when the PLL has locked. */ u32 lock_mask; + u32 flags; const struct bcm2835_pll_ana_bits *ana; @@ -525,6 +527,20 @@ static int bcm2835_pll_is_on(struct clk_hw *hw) A2W_PLL_CTRL_PRST_DISABLE; } +static u32 bcm2835_pll_get_prediv_mask(struct bcm2835_cprman *cprman, + const struct bcm2835_pll_data *data) +{ + /* + * On BCM2711 there isn't a pre-divisor available in the PLL feedback + * loop. Bits 13:14 of ANA1 (PLLA,PLLB,PLLC,PLLD) have been re-purposed + * for to for VCO RANGE bits. + */ + if (cprman->soc & SOC_BCM2711) + return 0; + + return data->ana->fb_prediv_mask; +} + static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate, unsigned long parent_rate, u32 *ndiv, u32 *fdiv) @@ -582,7 +598,7 @@ static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw, ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT; pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT; using_prediv = cprman_read(cprman, data->ana_reg_base + 4) & - data->ana->fb_prediv_mask; + bcm2835_pll_get_prediv_mask(cprman, data); if (using_prediv) { ndiv *= 2; @@ -665,6 +681,7 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw, struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw); struct bcm2835_cprman *cprman = pll->cprman; const struct bcm2835_pll_data *data = pll->data; + u32 prediv_mask = bcm2835_pll_get_prediv_mask(cprman, data); bool was_using_prediv, use_fb_prediv, do_ana_setup_first; u32 ndiv, fdiv, a2w_ctl; u32 ana[4]; @@ -682,7 +699,7 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw, for (i = 3; i >= 0; i--) ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4); - was_using_prediv = ana[1] & data->ana->fb_prediv_mask; + was_using_prediv = ana[1] & prediv_mask; ana[0] &= ~data->ana->mask0; ana[0] |= data->ana->set0; @@ -692,10 +709,10 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw, ana[3] |= data->ana->set3; if (was_using_prediv && !use_fb_prediv) { - ana[1] &= ~data->ana->fb_prediv_mask; + ana[1] &= ~prediv_mask; do_ana_setup_first = true; } else if (!was_using_prediv && use_fb_prediv) { - ana[1] |= data->ana->fb_prediv_mask; + ana[1] |= prediv_mask; do_ana_setup_first = false; } else { do_ana_setup_first = true; @@ -1310,7 +1327,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, init.num_parents = 1; init.name = pll_data->name; init.ops = &bcm2835_pll_clk_ops; - init.flags = CLK_IGNORE_UNUSED; + init.flags = pll_data->flags | CLK_IGNORE_UNUSED; pll = kzalloc(sizeof(*pll), GFP_KERNEL); if (!pll) @@ -1684,10 +1701,33 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .fixed_divider = 1, .flags = CLK_SET_RATE_PARENT), - /* - * PLLB is used for the ARM's clock. Controlled by firmware, see - * clk-raspberrypi.c. - */ + /* PLLB is used for the ARM's clock. */ + [BCM2835_PLLB] = REGISTER_PLL( + SOC_ALL, + .name = "pllb", + .cm_ctrl_reg = CM_PLLB, + .a2w_ctrl_reg = A2W_PLLB_CTRL, + .frac_reg = A2W_PLLB_FRAC, + .ana_reg_base = A2W_PLLB_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE, + .lock_mask = CM_LOCK_FLOCKB, + + .ana = &bcm2835_ana_default, + + .min_rate = 600000000u, + .max_rate = 3000000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE, + .flags = CLK_GET_RATE_NOCACHE), + [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllb_arm", + .source_pll = "pllb", + .cm_reg = CM_PLLB, + .a2w_reg = A2W_PLLB_ARM, + .load_mask = CM_PLLB_LOADARM, + .hold_mask = CM_PLLB_HOLDARM, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE), /* * PLLC is the core PLL, used to drive the core VPU clock. @@ -2238,6 +2278,7 @@ static int bcm2835_clk_probe(struct platform_device *pdev) platform_set_drvdata(pdev, cprman); cprman->onecell.num = asize; + cprman->soc = pdata->soc; hws = cprman->onecell.hws; for (i = 0; i < asize; i++) { diff --git a/drivers/clk/bcm/clk-bcm63xx-gate.c b/drivers/clk/bcm/clk-bcm63xx-gate.c index 98e884957db8..89297c57881e 100644 --- a/drivers/clk/bcm/clk-bcm63xx-gate.c +++ b/drivers/clk/bcm/clk-bcm63xx-gate.c @@ -6,6 +6,14 @@ #include <linux/of_device.h> #include <linux/platform_device.h> +#include <dt-bindings/clock/bcm3368-clock.h> +#include <dt-bindings/clock/bcm6318-clock.h> +#include <dt-bindings/clock/bcm6328-clock.h> +#include <dt-bindings/clock/bcm6358-clock.h> +#include <dt-bindings/clock/bcm6362-clock.h> +#include <dt-bindings/clock/bcm6368-clock.h> +#include <dt-bindings/clock/bcm63268-clock.h> + struct clk_bcm63xx_table_entry { const char * const name; u8 bit; @@ -20,126 +28,458 @@ struct clk_bcm63xx_hw { }; static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { - { .name = "mac", .bit = 3, }, - { .name = "tc", .bit = 5, }, - { .name = "us_top", .bit = 6, }, - { .name = "ds_top", .bit = 7, }, - { .name = "acm", .bit = 8, }, - { .name = "spi", .bit = 9, }, - { .name = "usbs", .bit = 10, }, - { .name = "bmu", .bit = 11, }, - { .name = "pcm", .bit = 12, }, - { .name = "ntp", .bit = 13, }, - { .name = "acp_b", .bit = 14, }, - { .name = "acp_a", .bit = 15, }, - { .name = "emusb", .bit = 17, }, - { .name = "enet0", .bit = 18, }, - { .name = "enet1", .bit = 19, }, - { .name = "usbsu", .bit = 20, }, - { .name = "ephy", .bit = 21, }, - { }, + { + .name = "mac", + .bit = BCM3368_CLK_MAC, + }, { + .name = "tc", + .bit = BCM3368_CLK_TC, + }, { + .name = "us_top", + .bit = BCM3368_CLK_US_TOP, + }, { + .name = "ds_top", + .bit = BCM3368_CLK_DS_TOP, + }, { + .name = "acm", + .bit = BCM3368_CLK_ACM, + }, { + .name = "spi", + .bit = BCM3368_CLK_SPI, + }, { + .name = "usbs", + .bit = BCM3368_CLK_USBS, + }, { + .name = "bmu", + .bit = BCM3368_CLK_BMU, + }, { + .name = "pcm", + .bit = BCM3368_CLK_PCM, + }, { + .name = "ntp", + .bit = BCM3368_CLK_NTP, + }, { + .name = "acp_b", + .bit = BCM3368_CLK_ACP_B, + }, { + .name = "acp_a", + .bit = BCM3368_CLK_ACP_A, + }, { + .name = "emusb", + .bit = BCM3368_CLK_EMUSB, + }, { + .name = "enet0", + .bit = BCM3368_CLK_ENET0, + }, { + .name = "enet1", + .bit = BCM3368_CLK_ENET1, + }, { + .name = "usbsu", + .bit = BCM3368_CLK_USBSU, + }, { + .name = "ephy", + .bit = BCM3368_CLK_EPHY, + }, { + /* sentinel */ + }, +}; + +static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = { + { + .name = "adsl_asb", + .bit = BCM6318_CLK_ADSL_ASB, + }, { + .name = "usb_asb", + .bit = BCM6318_CLK_USB_ASB, + }, { + .name = "mips_asb", + .bit = BCM6318_CLK_MIPS_ASB, + }, { + .name = "pcie_asb", + .bit = BCM6318_CLK_PCIE_ASB, + }, { + .name = "phymips_asb", + .bit = BCM6318_CLK_PHYMIPS_ASB, + }, { + .name = "robosw_asb", + .bit = BCM6318_CLK_ROBOSW_ASB, + }, { + .name = "sar_asb", + .bit = BCM6318_CLK_SAR_ASB, + }, { + .name = "sdr_asb", + .bit = BCM6318_CLK_SDR_ASB, + }, { + .name = "swreg_asb", + .bit = BCM6318_CLK_SWREG_ASB, + }, { + .name = "periph_asb", + .bit = BCM6318_CLK_PERIPH_ASB, + }, { + .name = "cpubus160", + .bit = BCM6318_CLK_CPUBUS160, + }, { + .name = "adsl", + .bit = BCM6318_CLK_ADSL, + }, { + .name = "sar125", + .bit = BCM6318_CLK_SAR125, + }, { + .name = "mips", + .bit = BCM6318_CLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "pcie", + .bit = BCM6318_CLK_PCIE, + }, { + .name = "robosw250", + .bit = BCM6318_CLK_ROBOSW250, + }, { + .name = "robosw025", + .bit = BCM6318_CLK_ROBOSW025, + }, { + .name = "sdr", + .bit = BCM6318_CLK_SDR, + .flags = CLK_IS_CRITICAL, + }, { + .name = "usbd", + .bit = BCM6318_CLK_USBD, + }, { + .name = "hsspi", + .bit = BCM6318_CLK_HSSPI, + }, { + .name = "pcie25", + .bit = BCM6318_CLK_PCIE25, + }, { + .name = "phymips", + .bit = BCM6318_CLK_PHYMIPS, + }, { + .name = "afe", + .bit = BCM6318_CLK_AFE, + }, { + .name = "qproc", + .bit = BCM6318_CLK_QPROC, + }, { + /* sentinel */ + }, +}; + +static const struct clk_bcm63xx_table_entry bcm6318_ubus_clocks[] = { + { + .name = "adsl-ubus", + .bit = BCM6318_UCLK_ADSL, + }, { + .name = "arb-ubus", + .bit = BCM6318_UCLK_ARB, + .flags = CLK_IS_CRITICAL, + }, { + .name = "mips-ubus", + .bit = BCM6318_UCLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "pcie-ubus", + .bit = BCM6318_UCLK_PCIE, + }, { + .name = "periph-ubus", + .bit = BCM6318_UCLK_PERIPH, + .flags = CLK_IS_CRITICAL, + }, { + .name = "phymips-ubus", + .bit = BCM6318_UCLK_PHYMIPS, + }, { + .name = "robosw-ubus", + .bit = BCM6318_UCLK_ROBOSW, + }, { + .name = "sar-ubus", + .bit = BCM6318_UCLK_SAR, + }, { + .name = "sdr-ubus", + .bit = BCM6318_UCLK_SDR, + }, { + .name = "usb-ubus", + .bit = BCM6318_UCLK_USB, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = { - { .name = "phy_mips", .bit = 0, }, - { .name = "adsl_qproc", .bit = 1, }, - { .name = "adsl_afe", .bit = 2, }, - { .name = "adsl", .bit = 3, }, - { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, }, - { .name = "sar", .bit = 5, }, - { .name = "pcm", .bit = 6, }, - { .name = "usbd", .bit = 7, }, - { .name = "usbh", .bit = 8, }, - { .name = "hsspi", .bit = 9, }, - { .name = "pcie", .bit = 10, }, - { .name = "robosw", .bit = 11, }, - { }, + { + .name = "phy_mips", + .bit = BCM6328_CLK_PHYMIPS, + }, { + .name = "adsl_qproc", + .bit = BCM6328_CLK_ADSL_QPROC, + }, { + .name = "adsl_afe", + .bit = BCM6328_CLK_ADSL_AFE, + }, { + .name = "adsl", + .bit = BCM6328_CLK_ADSL, + }, { + .name = "mips", + .bit = BCM6328_CLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "sar", + .bit = BCM6328_CLK_SAR, + }, { + .name = "pcm", + .bit = BCM6328_CLK_PCM, + }, { + .name = "usbd", + .bit = BCM6328_CLK_USBD, + }, { + .name = "usbh", + .bit = BCM6328_CLK_USBH, + }, { + .name = "hsspi", + .bit = BCM6328_CLK_HSSPI, + }, { + .name = "pcie", + .bit = BCM6328_CLK_PCIE, + }, { + .name = "robosw", + .bit = BCM6328_CLK_ROBOSW, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm6358_clocks[] = { - { .name = "enet", .bit = 4, }, - { .name = "adslphy", .bit = 5, }, - { .name = "pcm", .bit = 8, }, - { .name = "spi", .bit = 9, }, - { .name = "usbs", .bit = 10, }, - { .name = "sar", .bit = 11, }, - { .name = "emusb", .bit = 17, }, - { .name = "enet0", .bit = 18, }, - { .name = "enet1", .bit = 19, }, - { .name = "usbsu", .bit = 20, }, - { .name = "ephy", .bit = 21, }, - { }, + { + .name = "enet", + .bit = BCM6358_CLK_ENET, + }, { + .name = "adslphy", + .bit = BCM6358_CLK_ADSLPHY, + }, { + .name = "pcm", + .bit = BCM6358_CLK_PCM, + }, { + .name = "spi", + .bit = BCM6358_CLK_SPI, + }, { + .name = "usbs", + .bit = BCM6358_CLK_USBS, + }, { + .name = "sar", + .bit = BCM6358_CLK_SAR, + }, { + .name = "emusb", + .bit = BCM6358_CLK_EMUSB, + }, { + .name = "enet0", + .bit = BCM6358_CLK_ENET0, + }, { + .name = "enet1", + .bit = BCM6358_CLK_ENET1, + }, { + .name = "usbsu", + .bit = BCM6358_CLK_USBSU, + }, { + .name = "ephy", + .bit = BCM6358_CLK_EPHY, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm6362_clocks[] = { - { .name = "adsl_qproc", .bit = 1, }, - { .name = "adsl_afe", .bit = 2, }, - { .name = "adsl", .bit = 3, }, - { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, }, - { .name = "wlan_ocp", .bit = 5, }, - { .name = "swpkt_usb", .bit = 7, }, - { .name = "swpkt_sar", .bit = 8, }, - { .name = "sar", .bit = 9, }, - { .name = "robosw", .bit = 10, }, - { .name = "pcm", .bit = 11, }, - { .name = "usbd", .bit = 12, }, - { .name = "usbh", .bit = 13, }, - { .name = "ipsec", .bit = 14, }, - { .name = "spi", .bit = 15, }, - { .name = "hsspi", .bit = 16, }, - { .name = "pcie", .bit = 17, }, - { .name = "fap", .bit = 18, }, - { .name = "phymips", .bit = 19, }, - { .name = "nand", .bit = 20, }, - { }, + { + .name = "adsl_qproc", + .bit = BCM6362_CLK_ADSL_QPROC, + }, { + .name = "adsl_afe", + .bit = BCM6362_CLK_ADSL_AFE, + }, { + .name = "adsl", + .bit = BCM6362_CLK_ADSL, + }, { + .name = "mips", + .bit = BCM6362_CLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "wlan_ocp", + .bit = BCM6362_CLK_WLAN_OCP, + }, { + .name = "swpkt_usb", + .bit = BCM6362_CLK_SWPKT_USB, + }, { + .name = "swpkt_sar", + .bit = BCM6362_CLK_SWPKT_SAR, + }, { + .name = "sar", + .bit = BCM6362_CLK_SAR, + }, { + .name = "robosw", + .bit = BCM6362_CLK_ROBOSW, + }, { + .name = "pcm", + .bit = BCM6362_CLK_PCM, + }, { + .name = "usbd", + .bit = BCM6362_CLK_USBD, + }, { + .name = "usbh", + .bit = BCM6362_CLK_USBH, + }, { + .name = "ipsec", + .bit = BCM6362_CLK_IPSEC, + }, { + .name = "spi", + .bit = BCM6362_CLK_SPI, + }, { + .name = "hsspi", + .bit = BCM6362_CLK_HSSPI, + }, { + .name = "pcie", + .bit = BCM6362_CLK_PCIE, + }, { + .name = "fap", + .bit = BCM6362_CLK_FAP, + }, { + .name = "phymips", + .bit = BCM6362_CLK_PHYMIPS, + }, { + .name = "nand", + .bit = BCM6362_CLK_NAND, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm6368_clocks[] = { - { .name = "vdsl_qproc", .bit = 2, }, - { .name = "vdsl_afe", .bit = 3, }, - { .name = "vdsl_bonding", .bit = 4, }, - { .name = "vdsl", .bit = 5, }, - { .name = "phymips", .bit = 6, }, - { .name = "swpkt_usb", .bit = 7, }, - { .name = "swpkt_sar", .bit = 8, }, - { .name = "spi", .bit = 9, }, - { .name = "usbd", .bit = 10, }, - { .name = "sar", .bit = 11, }, - { .name = "robosw", .bit = 12, }, - { .name = "utopia", .bit = 13, }, - { .name = "pcm", .bit = 14, }, - { .name = "usbh", .bit = 15, }, - { .name = "disable_gless", .bit = 16, }, - { .name = "nand", .bit = 17, }, - { .name = "ipsec", .bit = 18, }, - { }, + { + .name = "vdsl_qproc", + .bit = BCM6368_CLK_VDSL_QPROC, + }, { + .name = "vdsl_afe", + .bit = BCM6368_CLK_VDSL_AFE, + }, { + .name = "vdsl_bonding", + .bit = BCM6368_CLK_VDSL_BONDING, + }, { + .name = "vdsl", + .bit = BCM6368_CLK_VDSL, + }, { + .name = "phymips", + .bit = BCM6368_CLK_PHYMIPS, + }, { + .name = "swpkt_usb", + .bit = BCM6368_CLK_SWPKT_USB, + }, { + .name = "swpkt_sar", + .bit = BCM6368_CLK_SWPKT_SAR, + }, { + .name = "spi", + .bit = BCM6368_CLK_SPI, + }, { + .name = "usbd", + .bit = BCM6368_CLK_USBD, + }, { + .name = "sar", + .bit = BCM6368_CLK_SAR, + }, { + .name = "robosw", + .bit = BCM6368_CLK_ROBOSW, + }, { + .name = "utopia", + .bit = BCM6368_CLK_UTOPIA, + }, { + .name = "pcm", + .bit = BCM6368_CLK_PCM, + }, { + .name = "usbh", + .bit = BCM6368_CLK_USBH, + }, { + .name = "disable_gless", + .bit = BCM6368_CLK_DIS_GLESS, + }, { + .name = "nand", + .bit = BCM6368_CLK_NAND, + }, { + .name = "ipsec", + .bit = BCM6368_CLK_IPSEC, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm63268_clocks[] = { - { .name = "disable_gless", .bit = 0, }, - { .name = "vdsl_qproc", .bit = 1, }, - { .name = "vdsl_afe", .bit = 2, }, - { .name = "vdsl", .bit = 3, }, - { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, }, - { .name = "wlan_ocp", .bit = 5, }, - { .name = "dect", .bit = 6, }, - { .name = "fap0", .bit = 7, }, - { .name = "fap1", .bit = 8, }, - { .name = "sar", .bit = 9, }, - { .name = "robosw", .bit = 10, }, - { .name = "pcm", .bit = 11, }, - { .name = "usbd", .bit = 12, }, - { .name = "usbh", .bit = 13, }, - { .name = "ipsec", .bit = 14, }, - { .name = "spi", .bit = 15, }, - { .name = "hsspi", .bit = 16, }, - { .name = "pcie", .bit = 17, }, - { .name = "phymips", .bit = 18, }, - { .name = "gmac", .bit = 19, }, - { .name = "nand", .bit = 20, }, - { .name = "tbus", .bit = 27, }, - { .name = "robosw250", .bit = 31, }, - { }, + { + .name = "disable_gless", + .bit = BCM63268_CLK_DIS_GLESS, + }, { + .name = "vdsl_qproc", + .bit = BCM63268_CLK_VDSL_QPROC, + }, { + .name = "vdsl_afe", + .bit = BCM63268_CLK_VDSL_AFE, + }, { + .name = "vdsl", + .bit = BCM63268_CLK_VDSL, + }, { + .name = "mips", + .bit = BCM63268_CLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "wlan_ocp", + .bit = BCM63268_CLK_WLAN_OCP, + }, { + .name = "dect", + .bit = BCM63268_CLK_DECT, + }, { + .name = "fap0", + .bit = BCM63268_CLK_FAP0, + }, { + .name = "fap1", + .bit = BCM63268_CLK_FAP1, + }, { + .name = "sar", + .bit = BCM63268_CLK_SAR, + }, { + .name = "robosw", + .bit = BCM63268_CLK_ROBOSW, + }, { + .name = "pcm", + .bit = BCM63268_CLK_PCM, + }, { + .name = "usbd", + .bit = BCM63268_CLK_USBD, + }, { + .name = "usbh", + .bit = BCM63268_CLK_USBH, + }, { + .name = "ipsec", + .bit = BCM63268_CLK_IPSEC, + }, { + .name = "spi", + .bit = BCM63268_CLK_SPI, + }, { + .name = "hsspi", + .bit = BCM63268_CLK_HSSPI, + }, { + .name = "pcie", + .bit = BCM63268_CLK_PCIE, + }, { + .name = "phymips", + .bit = BCM63268_CLK_PHYMIPS, + }, { + .name = "gmac", + .bit = BCM63268_CLK_GMAC, + }, { + .name = "nand", + .bit = BCM63268_CLK_NAND, + }, { + .name = "tbus", + .bit = BCM63268_CLK_TBUS, + }, { + .name = "robosw250", + .bit = BCM63268_CLK_ROBOSW250, + }, { + /* sentinel */ + }, }; static int clk_bcm63xx_probe(struct platform_device *pdev) @@ -155,6 +495,7 @@ static int clk_bcm63xx_probe(struct platform_device *pdev) for (entry = table; entry->name; entry++) maxbit = max_t(u8, maxbit, entry->bit); + maxbit++; hw = devm_kzalloc(&pdev->dev, struct_size(hw, data.hws, maxbit), GFP_KERNEL); @@ -217,6 +558,8 @@ static int clk_bcm63xx_remove(struct platform_device *pdev) static const struct of_device_id clk_bcm63xx_dt_ids[] = { { .compatible = "brcm,bcm3368-clocks", .data = &bcm3368_clocks, }, + { .compatible = "brcm,bcm6318-clocks", .data = &bcm6318_clocks, }, + { .compatible = "brcm,bcm6318-ubus-clocks", .data = &bcm6318_ubus_clocks, }, { .compatible = "brcm,bcm6328-clocks", .data = &bcm6328_clocks, }, { .compatible = "brcm,bcm6358-clocks", .data = &bcm6358_clocks, }, { .compatible = "brcm,bcm6362-clocks", .data = &bcm6362_clocks, }, diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index 1654fd0eedc9..5cc82954e1ce 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -18,30 +18,56 @@ #include <soc/bcm2835/raspberrypi-firmware.h> -#define RPI_FIRMWARE_ARM_CLK_ID 0x00000003 +enum rpi_firmware_clk_id { + RPI_FIRMWARE_EMMC_CLK_ID = 1, + RPI_FIRMWARE_UART_CLK_ID, + RPI_FIRMWARE_ARM_CLK_ID, + RPI_FIRMWARE_CORE_CLK_ID, + RPI_FIRMWARE_V3D_CLK_ID, + RPI_FIRMWARE_H264_CLK_ID, + RPI_FIRMWARE_ISP_CLK_ID, + RPI_FIRMWARE_SDRAM_CLK_ID, + RPI_FIRMWARE_PIXEL_CLK_ID, + RPI_FIRMWARE_PWM_CLK_ID, + RPI_FIRMWARE_HEVC_CLK_ID, + RPI_FIRMWARE_EMMC2_CLK_ID, + RPI_FIRMWARE_M2MC_CLK_ID, + RPI_FIRMWARE_PIXEL_BVB_CLK_ID, + RPI_FIRMWARE_NUM_CLK_ID, +}; + +static char *rpi_firmware_clk_names[] = { + [RPI_FIRMWARE_EMMC_CLK_ID] = "emmc", + [RPI_FIRMWARE_UART_CLK_ID] = "uart", + [RPI_FIRMWARE_ARM_CLK_ID] = "arm", + [RPI_FIRMWARE_CORE_CLK_ID] = "core", + [RPI_FIRMWARE_V3D_CLK_ID] = "v3d", + [RPI_FIRMWARE_H264_CLK_ID] = "h264", + [RPI_FIRMWARE_ISP_CLK_ID] = "isp", + [RPI_FIRMWARE_SDRAM_CLK_ID] = "sdram", + [RPI_FIRMWARE_PIXEL_CLK_ID] = "pixel", + [RPI_FIRMWARE_PWM_CLK_ID] = "pwm", + [RPI_FIRMWARE_HEVC_CLK_ID] = "hevc", + [RPI_FIRMWARE_EMMC2_CLK_ID] = "emmc2", + [RPI_FIRMWARE_M2MC_CLK_ID] = "m2mc", + [RPI_FIRMWARE_PIXEL_BVB_CLK_ID] = "pixel-bvb", +}; #define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0) #define RPI_FIRMWARE_STATE_WAIT_BIT BIT(1) -/* - * Even though the firmware interface alters 'pllb' the frequencies are - * provided as per 'pllb_arm'. We need to scale before passing them trough. - */ -#define RPI_FIRMWARE_PLLB_ARM_DIV_RATE 2 - -#define A2W_PLL_FRAC_BITS 20 - struct raspberrypi_clk { struct device *dev; struct rpi_firmware *firmware; struct platform_device *cpufreq; +}; - unsigned long min_rate; - unsigned long max_rate; +struct raspberrypi_clk_data { + struct clk_hw hw; - struct clk_hw pllb; - struct clk_hw *pllb_arm; - struct clk_lookup *pllb_arm_lookup; + unsigned int id; + + struct raspberrypi_clk *rpi; }; /* @@ -64,11 +90,12 @@ struct raspberrypi_firmware_prop { __le32 disable_turbo; } __packed; -static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag, - u32 clk, u32 *val) +static int raspberrypi_clock_property(struct rpi_firmware *firmware, + const struct raspberrypi_clk_data *data, + u32 tag, u32 *val) { struct raspberrypi_firmware_prop msg = { - .id = cpu_to_le32(clk), + .id = cpu_to_le32(data->id), .val = cpu_to_le32(*val), .disable_turbo = cpu_to_le32(1), }; @@ -83,16 +110,16 @@ static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag, return 0; } -static int raspberrypi_fw_pll_is_on(struct clk_hw *hw) +static int raspberrypi_fw_is_prepared(struct clk_hw *hw) { - struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, - pllb); + struct raspberrypi_clk_data *data = + container_of(hw, struct raspberrypi_clk_data, hw); + struct raspberrypi_clk *rpi = data->rpi; u32 val = 0; int ret; - ret = raspberrypi_clock_property(rpi->firmware, - RPI_FIRMWARE_GET_CLOCK_STATE, - RPI_FIRMWARE_ARM_CLK_ID, &val); + ret = raspberrypi_clock_property(rpi->firmware, data, + RPI_FIRMWARE_GET_CLOCK_STATE, &val); if (ret) return 0; @@ -100,36 +127,34 @@ static int raspberrypi_fw_pll_is_on(struct clk_hw *hw) } -static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw, - unsigned long parent_rate) +static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw, + unsigned long parent_rate) { - struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, - pllb); + struct raspberrypi_clk_data *data = + container_of(hw, struct raspberrypi_clk_data, hw); + struct raspberrypi_clk *rpi = data->rpi; u32 val = 0; int ret; - ret = raspberrypi_clock_property(rpi->firmware, - RPI_FIRMWARE_GET_CLOCK_RATE, - RPI_FIRMWARE_ARM_CLK_ID, - &val); + ret = raspberrypi_clock_property(rpi->firmware, data, + RPI_FIRMWARE_GET_CLOCK_RATE, &val); if (ret) return ret; - return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + return val; } -static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) +static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) { - struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, - pllb); - u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + struct raspberrypi_clk_data *data = + container_of(hw, struct raspberrypi_clk_data, hw); + struct raspberrypi_clk *rpi = data->rpi; + u32 _rate = rate; int ret; - ret = raspberrypi_clock_property(rpi->firmware, - RPI_FIRMWARE_SET_CLOCK_RATE, - RPI_FIRMWARE_ARM_CLK_ID, - &new_rate); + ret = raspberrypi_clock_property(rpi->firmware, data, + RPI_FIRMWARE_SET_CLOCK_RATE, &_rate); if (ret) dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d", clk_hw_get_name(hw), ret); @@ -137,111 +162,128 @@ static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, return ret; } -/* - * Sadly there is no firmware rate rounding interface. We borrowed it from - * clk-bcm2835. - */ -static int raspberrypi_pll_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) +static int raspberrypi_fw_dumb_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) { - struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, - pllb); - u64 div, final_rate; - u32 ndiv, fdiv; - - /* We can't use req->rate directly as it would overflow */ - final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate); - - div = (u64)final_rate << A2W_PLL_FRAC_BITS; - do_div(div, req->best_parent_rate); - - ndiv = div >> A2W_PLL_FRAC_BITS; - fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1); - - final_rate = ((u64)req->best_parent_rate * - ((ndiv << A2W_PLL_FRAC_BITS) + fdiv)); - - req->rate = final_rate >> A2W_PLL_FRAC_BITS; - + /* + * The firmware will do the rounding but that isn't part of + * the interface with the firmware, so we just do our best + * here. + */ + req->rate = clamp(req->rate, req->min_rate, req->max_rate); return 0; } -static const struct clk_ops raspberrypi_firmware_pll_clk_ops = { - .is_prepared = raspberrypi_fw_pll_is_on, - .recalc_rate = raspberrypi_fw_pll_get_rate, - .set_rate = raspberrypi_fw_pll_set_rate, - .determine_rate = raspberrypi_pll_determine_rate, +static const struct clk_ops raspberrypi_firmware_clk_ops = { + .is_prepared = raspberrypi_fw_is_prepared, + .recalc_rate = raspberrypi_fw_get_rate, + .determine_rate = raspberrypi_fw_dumb_determine_rate, + .set_rate = raspberrypi_fw_set_rate, }; -static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi) +static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi, + unsigned int parent, + unsigned int id) { - u32 min_rate = 0, max_rate = 0; - struct clk_init_data init; + struct raspberrypi_clk_data *data; + struct clk_init_data init = {}; + u32 min_rate, max_rate; int ret; - memset(&init, 0, sizeof(init)); + data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return ERR_PTR(-ENOMEM); + data->rpi = rpi; + data->id = id; - /* All of the PLLs derive from the external oscillator. */ - init.parent_names = (const char *[]){ "osc" }; - init.num_parents = 1; - init.name = "pllb"; - init.ops = &raspberrypi_firmware_pll_clk_ops; - init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED; + init.name = devm_kasprintf(rpi->dev, GFP_KERNEL, + "fw-clk-%s", + rpi_firmware_clk_names[id]); + init.ops = &raspberrypi_firmware_clk_ops; + init.flags = CLK_GET_RATE_NOCACHE; - /* Get min & max rates set by the firmware */ - ret = raspberrypi_clock_property(rpi->firmware, + data->hw.init = &init; + + ret = raspberrypi_clock_property(rpi->firmware, data, RPI_FIRMWARE_GET_MIN_CLOCK_RATE, - RPI_FIRMWARE_ARM_CLK_ID, &min_rate); if (ret) { - dev_err(rpi->dev, "Failed to get %s min freq: %d\n", - init.name, ret); - return ret; + dev_err(rpi->dev, "Failed to get clock %d min freq: %d", + id, ret); + return ERR_PTR(ret); } - ret = raspberrypi_clock_property(rpi->firmware, + ret = raspberrypi_clock_property(rpi->firmware, data, RPI_FIRMWARE_GET_MAX_CLOCK_RATE, - RPI_FIRMWARE_ARM_CLK_ID, &max_rate); if (ret) { - dev_err(rpi->dev, "Failed to get %s max freq: %d\n", - init.name, ret); - return ret; - } - - if (!min_rate || !max_rate) { - dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n", - min_rate, max_rate); - return -EINVAL; + dev_err(rpi->dev, "Failed to get clock %d max freq: %d\n", + id, ret); + return ERR_PTR(ret); } - dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n", - min_rate, max_rate); + ret = devm_clk_hw_register(rpi->dev, &data->hw); + if (ret) + return ERR_PTR(ret); - rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; - rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + clk_hw_set_rate_range(&data->hw, min_rate, max_rate); - rpi->pllb.init = &init; + if (id == RPI_FIRMWARE_ARM_CLK_ID) { + ret = devm_clk_hw_register_clkdev(rpi->dev, &data->hw, + NULL, "cpu0"); + if (ret) { + dev_err(rpi->dev, "Failed to initialize clkdev\n"); + return ERR_PTR(ret); + } + } - return devm_clk_hw_register(rpi->dev, &rpi->pllb); + return &data->hw; } -static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi) +struct rpi_firmware_get_clocks_response { + u32 parent; + u32 id; +}; + +static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi, + struct clk_hw_onecell_data *data) { - rpi->pllb_arm = clk_hw_register_fixed_factor(rpi->dev, - "pllb_arm", "pllb", - CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, - 1, 2); - if (IS_ERR(rpi->pllb_arm)) { - dev_err(rpi->dev, "Failed to initialize pllb_arm\n"); - return PTR_ERR(rpi->pllb_arm); - } + struct rpi_firmware_get_clocks_response *clks; + int ret; - rpi->pllb_arm_lookup = clkdev_hw_create(rpi->pllb_arm, NULL, "cpu0"); - if (!rpi->pllb_arm_lookup) { - dev_err(rpi->dev, "Failed to initialize pllb_arm_lookup\n"); - clk_hw_unregister_fixed_factor(rpi->pllb_arm); + clks = devm_kcalloc(rpi->dev, + sizeof(*clks), RPI_FIRMWARE_NUM_CLK_ID, + GFP_KERNEL); + if (!clks) return -ENOMEM; + + ret = rpi_firmware_property(rpi->firmware, RPI_FIRMWARE_GET_CLOCKS, + clks, + sizeof(*clks) * RPI_FIRMWARE_NUM_CLK_ID); + if (ret) + return ret; + + while (clks->id) { + struct clk_hw *hw; + + switch (clks->id) { + case RPI_FIRMWARE_ARM_CLK_ID: + case RPI_FIRMWARE_CORE_CLK_ID: + case RPI_FIRMWARE_M2MC_CLK_ID: + case RPI_FIRMWARE_V3D_CLK_ID: + hw = raspberrypi_clk_register(rpi, clks->parent, + clks->id); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + data->hws[clks->id] = hw; + data->num = clks->id + 1; + fallthrough; + + default: + clks++; + break; + } } return 0; @@ -249,14 +291,23 @@ static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi) static int raspberrypi_clk_probe(struct platform_device *pdev) { + struct clk_hw_onecell_data *clk_data; struct device_node *firmware_node; struct device *dev = &pdev->dev; struct rpi_firmware *firmware; struct raspberrypi_clk *rpi; int ret; - firmware_node = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); + /* + * We can be probed either through the an old-fashioned + * platform device registration or through a DT node that is a + * child of the firmware node. Handle both cases. + */ + if (dev->of_node) + firmware_node = of_get_parent(dev->of_node); + else + firmware_node = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); if (!firmware_node) { dev_err(dev, "Missing firmware node\n"); return -ENOENT; @@ -275,13 +326,18 @@ static int raspberrypi_clk_probe(struct platform_device *pdev) rpi->firmware = firmware; platform_set_drvdata(pdev, rpi); - ret = raspberrypi_register_pllb(rpi); - if (ret) { - dev_err(dev, "Failed to initialize pllb, %d\n", ret); + clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, + RPI_FIRMWARE_NUM_CLK_ID), + GFP_KERNEL); + if (!clk_data) + return -ENOMEM; + + ret = raspberrypi_discover_clocks(rpi, clk_data); + if (ret) return ret; - } - ret = raspberrypi_register_pllb_arm(rpi); + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + clk_data); if (ret) return ret; @@ -300,9 +356,16 @@ static int raspberrypi_clk_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id raspberrypi_clk_match[] = { + { .compatible = "raspberrypi,firmware-clocks" }, + { }, +}; +MODULE_DEVICE_TABLE(of, raspberrypi_clk_match); + static struct platform_driver raspberrypi_clk_driver = { .driver = { .name = "raspberrypi-clk", + .of_match_table = raspberrypi_clk_match, }, .probe = raspberrypi_clk_probe, .remove = raspberrypi_clk_remove, diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c index fa96659f8023..c90460e7ef21 100644 --- a/drivers/clk/clk-versaclock5.c +++ b/drivers/clk/clk-versaclock5.c @@ -24,6 +24,8 @@ #include <linux/regmap.h> #include <linux/slab.h> +#include <dt-bindings/clk/versaclock.h> + /* VersaClock5 registers */ #define VC5_OTP_CONTROL 0x00 @@ -89,6 +91,28 @@ /* Clock control register for clock 1,2 */ #define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n)) +#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT 5 +#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT) + +#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL (VC5_LVPECL) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS (VC5_CMOS) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33 (VC5_HCSL33) +#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS (VC5_LVDS) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2 (VC5_CMOS2) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD (VC5_CMOSD) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25 (VC5_HCSL25) + +#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT 3 +#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_18 (0<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_25 (2<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_33 (3<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT 0 +#define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_80 (0<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_85 (1<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_90 (2<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_100 (3<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) #define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0) #define VC5_CLK_OE_SHDN 0x68 @@ -145,6 +169,14 @@ struct vc5_hw_data { unsigned int num; }; +struct vc5_out_data { + struct clk_hw hw; + struct vc5_driver_data *vc5; + unsigned int num; + unsigned int clk_output_cfg0; + unsigned int clk_output_cfg0_mask; +}; + struct vc5_driver_data { struct i2c_client *client; struct regmap *regmap; @@ -158,31 +190,7 @@ struct vc5_driver_data { struct clk_hw clk_pfd; struct vc5_hw_data clk_pll; struct vc5_hw_data clk_fod[VC5_MAX_FOD_NUM]; - struct vc5_hw_data clk_out[VC5_MAX_CLK_OUT_NUM]; -}; - -static const char * const vc5_mux_names[] = { - "mux" -}; - -static const char * const vc5_dbl_names[] = { - "dbl" -}; - -static const char * const vc5_pfd_names[] = { - "pfd" -}; - -static const char * const vc5_pll_names[] = { - "pll" -}; - -static const char * const vc5_fod_names[] = { - "fod0", "fod1", "fod2", "fod3", -}; - -static const char * const vc5_clk_out_names[] = { - "out0_sel_i2cb", "out1", "out2", "out3", "out4", + struct vc5_out_data clk_out[VC5_MAX_CLK_OUT_NUM]; }; /* @@ -565,7 +573,7 @@ static const struct clk_ops vc5_fod_ops = { static int vc5_clk_out_prepare(struct clk_hw *hw) { - struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw); struct vc5_driver_data *vc5 = hwdata->vc5; const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM | VC5_OUT_DIV_CONTROL_SEL_EXT | @@ -591,12 +599,23 @@ static int vc5_clk_out_prepare(struct clk_hw *hw) regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1), VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, VC5_CLK_OUTPUT_CFG1_EN_CLKBUF); + if (hwdata->clk_output_cfg0_mask) { + dev_dbg(&vc5->client->dev, "Update output %d mask 0x%0X val 0x%0X\n", + hwdata->num, hwdata->clk_output_cfg0_mask, + hwdata->clk_output_cfg0); + + regmap_update_bits(vc5->regmap, + VC5_CLK_OUTPUT_CFG(hwdata->num, 0), + hwdata->clk_output_cfg0_mask, + hwdata->clk_output_cfg0); + } + return 0; } static void vc5_clk_out_unprepare(struct clk_hw *hw) { - struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw); struct vc5_driver_data *vc5 = hwdata->vc5; /* Disable the clock buffer */ @@ -606,7 +625,7 @@ static void vc5_clk_out_unprepare(struct clk_hw *hw) static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw) { - struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw); struct vc5_driver_data *vc5 = hwdata->vc5; const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM | VC5_OUT_DIV_CONTROL_SEL_EXT | @@ -636,7 +655,7 @@ static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw) static int vc5_clk_out_set_parent(struct clk_hw *hw, u8 index) { - struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw); + struct vc5_out_data *hwdata = container_of(hw, struct vc5_out_data, hw); struct vc5_driver_data *vc5 = hwdata->vc5; const u8 mask = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_SELB_NORM | @@ -690,10 +709,125 @@ static int vc5_map_index_to_output(const enum vc5_model model, } } +static int vc5_update_mode(struct device_node *np_output, + struct vc5_out_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, "idt,mode", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK; + switch (value) { + case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33: + case VC5_CLK_OUTPUT_CFG0_CFG_LVDS: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25: + clk_out->clk_output_cfg0 |= + value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_update_power(struct device_node *np_output, + struct vc5_out_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, + "idt,voltage-microvolts", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK; + switch (value) { + case 1800000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18; + break; + case 2500000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25; + break; + case 3300000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_update_slew(struct device_node *np_output, + struct vc5_out_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, "idt,slew-percent", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK; + switch (value) { + case 80: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80; + break; + case 85: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85; + break; + case 90: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90; + break; + case 100: + clk_out->clk_output_cfg0 |= + VC5_CLK_OUTPUT_CFG0_SLEW_100; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_get_output_config(struct i2c_client *client, + struct vc5_out_data *clk_out) +{ + struct device_node *np_output; + char *child_name; + int ret = 0; + + child_name = kasprintf(GFP_KERNEL, "OUT%d", clk_out->num + 1); + if (!child_name) + return -ENOMEM; + + np_output = of_get_child_by_name(client->dev.of_node, child_name); + kfree(child_name); + if (!np_output) + return 0; + + ret = vc5_update_mode(np_output, clk_out); + if (ret) + goto output_error; + + ret = vc5_update_power(np_output, clk_out); + if (ret) + goto output_error; + + ret = vc5_update_slew(np_output, clk_out); + +output_error: + if (ret) { + dev_err(&client->dev, + "Invalid clock output configuration OUT%d\n", + clk_out->num + 1); + } + + of_node_put(np_output); + + return ret; +} + static const struct of_device_id clk_vc5_of_match[]; -static int vc5_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct vc5_driver_data *vc5; struct clk_init_data init; @@ -702,7 +836,7 @@ static int vc5_probe(struct i2c_client *client, int ret; vc5 = devm_kzalloc(&client->dev, sizeof(*vc5), GFP_KERNEL); - if (vc5 == NULL) + if (!vc5) return -ENOMEM; i2c_set_clientdata(client, vc5); @@ -742,7 +876,7 @@ static int vc5_probe(struct i2c_client *client, if (!IS_ERR(vc5->pin_clkin)) { vc5->clk_mux_ins |= VC5_MUX_IN_CLKIN; parent_names[init.num_parents++] = - __clk_get_name(vc5->pin_clkin); + __clk_get_name(vc5->pin_clkin); } if (!init.num_parents) { @@ -750,115 +884,116 @@ static int vc5_probe(struct i2c_client *client, return -EINVAL; } - init.name = vc5_mux_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.mux", client->dev.of_node); init.ops = &vc5_mux_ops; init.flags = 0; init.parent_names = parent_names; vc5->clk_mux.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux); - if (ret) { - dev_err(&client->dev, "unable to register %s\n", init.name); - goto err_clk; - } + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) { /* Register frequency doubler */ memset(&init, 0, sizeof(init)); - init.name = vc5_dbl_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.dbl", + client->dev.of_node); init.ops = &vc5_dbl_ops; init.flags = CLK_SET_RATE_PARENT; - init.parent_names = vc5_mux_names; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mux); init.num_parents = 1; vc5->clk_mul.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_mul); - if (ret) { - dev_err(&client->dev, "unable to register %s\n", - init.name); - goto err_clk; - } + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ } /* Register PFD */ memset(&init, 0, sizeof(init)); - init.name = vc5_pfd_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.pfd", client->dev.of_node); init.ops = &vc5_pfd_ops; init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) - init.parent_names = vc5_dbl_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mul); else - init.parent_names = vc5_mux_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mux); init.num_parents = 1; vc5->clk_pfd.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_pfd); - if (ret) { - dev_err(&client->dev, "unable to register %s\n", init.name); - goto err_clk; - } + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ /* Register PLL */ memset(&init, 0, sizeof(init)); - init.name = vc5_pll_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.pll", client->dev.of_node); init.ops = &vc5_pll_ops; init.flags = CLK_SET_RATE_PARENT; - init.parent_names = vc5_pfd_names; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_pfd); init.num_parents = 1; vc5->clk_pll.num = 0; vc5->clk_pll.vc5 = vc5; vc5->clk_pll.hw.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw); - if (ret) { - dev_err(&client->dev, "unable to register %s\n", init.name); - goto err_clk; - } + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ /* Register FODs */ for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) { idx = vc5_map_index_to_output(vc5->chip_info->model, n); memset(&init, 0, sizeof(init)); - init.name = vc5_fod_names[idx]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.fod%d", + client->dev.of_node, idx); init.ops = &vc5_fod_ops; init.flags = CLK_SET_RATE_PARENT; - init.parent_names = vc5_pll_names; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_pll.hw); init.num_parents = 1; vc5->clk_fod[n].num = idx; vc5->clk_fod[n].vc5 = vc5; vc5->clk_fod[n].hw.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw); - if (ret) { - dev_err(&client->dev, "unable to register %s\n", - init.name); - goto err_clk; - } + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ } /* Register MUX-connected OUT0_I2C_SELB output */ memset(&init, 0, sizeof(init)); - init.name = vc5_clk_out_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.out0_sel_i2cb", + client->dev.of_node); init.ops = &vc5_clk_out_ops; init.flags = CLK_SET_RATE_PARENT; - init.parent_names = vc5_mux_names; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mux); init.num_parents = 1; vc5->clk_out[0].num = idx; vc5->clk_out[0].vc5 = vc5; vc5->clk_out[0].hw.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw); - if (ret) { - dev_err(&client->dev, "unable to register %s\n", - init.name); - goto err_clk; - } + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ /* Register FOD-connected OUTx outputs */ for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) { idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1); - parent_names[0] = vc5_fod_names[idx]; + parent_names[0] = clk_hw_get_name(&vc5->clk_fod[idx].hw); if (n == 1) - parent_names[1] = vc5_mux_names[0]; + parent_names[1] = clk_hw_get_name(&vc5->clk_mux); else - parent_names[1] = vc5_clk_out_names[n - 1]; + parent_names[1] = + clk_hw_get_name(&vc5->clk_out[n - 1].hw); memset(&init, 0, sizeof(init)); - init.name = vc5_clk_out_names[idx + 1]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.out%d", + client->dev.of_node, idx + 1); init.ops = &vc5_clk_out_ops; init.flags = CLK_SET_RATE_PARENT; init.parent_names = parent_names; @@ -866,13 +1001,15 @@ static int vc5_probe(struct i2c_client *client, vc5->clk_out[n].num = idx; vc5->clk_out[n].vc5 = vc5; vc5->clk_out[n].hw.init = &init; - ret = devm_clk_hw_register(&client->dev, - &vc5->clk_out[n].hw); - if (ret) { - dev_err(&client->dev, "unable to register %s\n", - init.name); + ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[n].hw); + if (ret) + goto err_clk_register; + kfree(init.name); /* clock framework made a copy of the name */ + + /* Fetch Clock Output configuration from DT (if specified) */ + ret = vc5_get_output_config(client, &vc5->clk_out[n]); + if (ret) goto err_clk; - } } ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5); @@ -883,6 +1020,9 @@ static int vc5_probe(struct i2c_client *client, return 0; +err_clk_register: + dev_err(&client->dev, "unable to register %s\n", init.name); + kfree(init.name); /* clock framework made a copy of the name */ err_clk: if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL) clk_unregister_fixed_rate(vc5->pin_xin); diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 3f588ed06ce3..47c0ee9da462 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1400,6 +1400,21 @@ int __clk_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) } EXPORT_SYMBOL_GPL(__clk_determine_rate); +/** + * clk_hw_round_rate() - round the given rate for a hw clk + * @hw: the hw clk for which we are rounding a rate + * @rate: the rate which is to be rounded + * + * Takes in a rate as input and rounds it to a rate that the clk can actually + * use. + * + * Context: prepare_lock must be held. + * For clk providers to call from within clk_ops such as .round_rate, + * .determine_rate. + * + * Return: returns rounded rate of hw clk if clk supports round_rate operation + * else returns the parent rate. + */ unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate) { int ret; @@ -4120,6 +4135,7 @@ static int devm_clk_hw_match(struct device *dev, void *res, void *data) /** * devm_clk_unregister - resource managed clk_unregister() + * @dev: device that is unregistering the clock data * @clk: clock to unregister * * Deallocate a clock allocated with devm_clk_register(). Normally @@ -4309,6 +4325,8 @@ static void clk_core_reparent_orphans(void) * @node: Pointer to device tree node of clock provider * @get: Get clock callback. Returns NULL or a struct clk for the * given clock specifier + * @get_hw: Get clk_hw callback. Returns NULL, ERR_PTR or a + * struct clk_hw for the given clock specifier * @data: context pointer to be passed into @get callback */ struct of_clk_provider { diff --git a/drivers/clk/socfpga/clk-agilex.c b/drivers/clk/socfpga/clk-agilex.c index 699527f7e764..8fb12cbe0208 100644 --- a/drivers/clk/socfpga/clk-agilex.c +++ b/drivers/clk/socfpga/clk-agilex.c @@ -252,7 +252,7 @@ static const struct stratix10_gate_clock agilex_gate_clks[] = { 0, 0, 0, 0, 0x30, 0, 0}, { AGILEX_MPU_PERIPH_CLK, "mpu_periph_clk", "mpu_clk", NULL, 1, 0, 0x24, 0, 0, 0, 0, 0, 0, 4}, - { AGILEX_MPU_L2RAM_CLK, "mpu_l2ram_clk", "mpu_clk", NULL, 1, 0, 0x24, + { AGILEX_MPU_CCU_CLK, "mpu_ccu_clk", "mpu_clk", NULL, 1, 0, 0x24, 0, 0, 0, 0, 0, 0, 2}, { AGILEX_L4_MAIN_CLK, "l4_main_clk", "noc_clk", NULL, 1, 0, 0x24, 1, 0x44, 0, 2, 0, 0, 0}, @@ -294,8 +294,12 @@ static const struct stratix10_gate_clock agilex_gate_clks[] = { 8, 0, 0, 0, 0, 0, 0}, { AGILEX_SPI_M_CLK, "spi_m_clk", "l4_mp_clk", NULL, 1, 0, 0x7C, 9, 0, 0, 0, 0, 0, 0}, - { AGILEX_NAND_CLK, "nand_clk", "l4_main_clk", NULL, 1, 0, 0x7C, + { AGILEX_NAND_X_CLK, "nand_x_clk", "l4_mp_clk", NULL, 1, 0, 0x7C, 10, 0, 0, 0, 0, 0, 0}, + { AGILEX_NAND_CLK, "nand_clk", "nand_x_clk", NULL, 1, 0, 0x7C, + 10, 0, 0, 0, 0, 0, 4}, + { AGILEX_NAND_ECC_CLK, "nand_ecc_clk", "nand_x_clk", NULL, 1, 0, 0x7C, + 10, 0, 0, 0, 0, 0, 4}, }; static int agilex_clk_register_c_perip(const struct stratix10_perip_c_clock *clks, diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index ef8098856a47..b25901a77c09 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -208,6 +208,20 @@ rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw) static void rpi_register_clk_driver(struct device *dev) { + struct device_node *firmware; + + /* + * Earlier DTs don't have a node for the firmware clocks but + * rely on us creating a platform device by hand. If we do + * have a node for the firmware clocks, just bail out here. + */ + firmware = of_get_compatible_child(dev->of_node, + "raspberrypi,firmware-clocks"); + if (firmware) { + of_node_put(firmware); + return; + } + rpi_clk = platform_device_register_data(dev, "raspberrypi-clk", -1, NULL, 0); } diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c index 067e7e7b34f1..e066614818a3 100644 --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c @@ -11,6 +11,7 @@ * Maxime Ripard <maxime.ripard@free-electrons.com> */ +#include <linux/delay.h> #include <linux/device.h> #include <linux/err.h> #include <linux/io.h> @@ -18,10 +19,9 @@ #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/reset-controller.h> +#include <linux/reset/reset-simple.h> #include <linux/spinlock.h> -#include "reset-simple.h" - static inline struct reset_simple_data * to_reset_simple_data(struct reset_controller_dev *rcdev) { @@ -64,6 +64,24 @@ static int reset_simple_deassert(struct reset_controller_dev *rcdev, return reset_simple_update(rcdev, id, false); } +static int reset_simple_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct reset_simple_data *data = to_reset_simple_data(rcdev); + int ret; + + if (!data->reset_us) + return -ENOTSUPP; + + ret = reset_simple_assert(rcdev, id); + if (ret) + return ret; + + usleep_range(data->reset_us, data->reset_us * 2); + + return reset_simple_deassert(rcdev, id); +} + static int reset_simple_status(struct reset_controller_dev *rcdev, unsigned long id) { @@ -81,6 +99,7 @@ static int reset_simple_status(struct reset_controller_dev *rcdev, const struct reset_control_ops reset_simple_ops = { .assert = reset_simple_assert, .deassert = reset_simple_deassert, + .reset = reset_simple_reset, .status = reset_simple_status, }; EXPORT_SYMBOL_GPL(reset_simple_ops); diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c index 96953992c2bb..bdd984296196 100644 --- a/drivers/reset/reset-socfpga.c +++ b/drivers/reset/reset-socfpga.c @@ -11,13 +11,12 @@ #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/reset-controller.h> +#include <linux/reset/reset-simple.h> #include <linux/reset/socfpga.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/types.h> -#include "reset-simple.h" - #define SOCFPGA_NR_BANKS 8 static int a10_reset_init(struct device_node *np) diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c index e7f169e57bcf..e752594b6971 100644 --- a/drivers/reset/reset-sunxi.c +++ b/drivers/reset/reset-sunxi.c @@ -14,13 +14,12 @@ #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/reset-controller.h> +#include <linux/reset/reset-simple.h> #include <linux/reset/sunxi.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/types.h> -#include "reset-simple.h" - static int sunxi_reset_init(struct device_node *np) { struct reset_simple_data *data; diff --git a/drivers/reset/reset-uniphier-glue.c b/drivers/reset/reset-uniphier-glue.c index 2b188b3bb69a..027990b79f61 100644 --- a/drivers/reset/reset-uniphier-glue.c +++ b/drivers/reset/reset-uniphier-glue.c @@ -9,8 +9,7 @@ #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/reset.h> - -#include "reset-simple.h" +#include <linux/reset/reset-simple.h> #define MAX_CLKS 2 #define MAX_RSTS 2 diff --git a/include/dt-bindings/clk/versaclock.h b/include/dt-bindings/clk/versaclock.h new file mode 100644 index 000000000000..c6a6a0946564 --- /dev/null +++ b/include/dt-bindings/clk/versaclock.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* This file defines field values used by the versaclock 6 family + * for defining output type + */ + +#define VC5_LVPECL 0 +#define VC5_CMOS 1 +#define VC5_HCSL33 2 +#define VC5_LVDS 3 +#define VC5_CMOS2 4 +#define VC5_CMOSD 5 +#define VC5_HCSL25 6 diff --git a/include/dt-bindings/clock/agilex-clock.h b/include/dt-bindings/clock/agilex-clock.h index f19cf8ccbdd2..06feca07e08e 100644 --- a/include/dt-bindings/clock/agilex-clock.h +++ b/include/dt-bindings/clock/agilex-clock.h @@ -65,6 +65,8 @@ #define AGILEX_SDMMC_CLK 50 #define AGILEX_SPI_M_CLK 51 #define AGILEX_USB_CLK 52 -#define AGILEX_NUM_CLKS 53 +#define AGILEX_NAND_X_CLK 53 +#define AGILEX_NAND_ECC_CLK 54 +#define AGILEX_NUM_CLKS 55 #endif /* __AGILEX_CLOCK_H */ diff --git a/include/dt-bindings/clock/bcm3368-clock.h b/include/dt-bindings/clock/bcm3368-clock.h new file mode 100644 index 000000000000..74a7382f77b8 --- /dev/null +++ b/include/dt-bindings/clock/bcm3368-clock.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_CLOCK_BCM3368_H +#define __DT_BINDINGS_CLOCK_BCM3368_H + +#define BCM3368_CLK_MAC 3 +#define BCM3368_CLK_TC 5 +#define BCM3368_CLK_US_TOP 6 +#define BCM3368_CLK_DS_TOP 7 +#define BCM3368_CLK_ACM 8 +#define BCM3368_CLK_SPI 9 +#define BCM3368_CLK_USBS 10 +#define BCM3368_CLK_BMU 11 +#define BCM3368_CLK_PCM 12 +#define BCM3368_CLK_NTP 13 +#define BCM3368_CLK_ACP_B 14 +#define BCM3368_CLK_ACP_A 15 +#define BCM3368_CLK_EMUSB 17 +#define BCM3368_CLK_ENET0 18 +#define BCM3368_CLK_ENET1 19 +#define BCM3368_CLK_USBSU 20 +#define BCM3368_CLK_EPHY 21 + +#endif /* __DT_BINDINGS_CLOCK_BCM3368_H */ diff --git a/include/dt-bindings/clock/bcm6318-clock.h b/include/dt-bindings/clock/bcm6318-clock.h new file mode 100644 index 000000000000..c4417f8983ab --- /dev/null +++ b/include/dt-bindings/clock/bcm6318-clock.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_CLOCK_BCM6318_H +#define __DT_BINDINGS_CLOCK_BCM6318_H + +#define BCM6318_CLK_ADSL_ASB 0 +#define BCM6318_CLK_USB_ASB 1 +#define BCM6318_CLK_MIPS_ASB 2 +#define BCM6318_CLK_PCIE_ASB 3 +#define BCM6318_CLK_PHYMIPS_ASB 4 +#define BCM6318_CLK_ROBOSW_ASB 5 +#define BCM6318_CLK_SAR_ASB 6 +#define BCM6318_CLK_SDR_ASB 7 +#define BCM6318_CLK_SWREG_ASB 8 +#define BCM6318_CLK_PERIPH_ASB 9 +#define BCM6318_CLK_CPUBUS160 10 +#define BCM6318_CLK_ADSL 11 +#define BCM6318_CLK_SAR125 12 +#define BCM6318_CLK_MIPS 13 +#define BCM6318_CLK_PCIE 14 +#define BCM6318_CLK_ROBOSW250 16 +#define BCM6318_CLK_ROBOSW025 17 +#define BCM6318_CLK_SDR 19 +#define BCM6318_CLK_USBD 20 +#define BCM6318_CLK_HSSPI 25 +#define BCM6318_CLK_PCIE25 27 +#define BCM6318_CLK_PHYMIPS 28 +#define BCM6318_CLK_AFE 29 +#define BCM6318_CLK_QPROC 30 + +#define BCM6318_UCLK_ADSL 0 +#define BCM6318_UCLK_ARB 1 +#define BCM6318_UCLK_MIPS 2 +#define BCM6318_UCLK_PCIE 3 +#define BCM6318_UCLK_PERIPH 4 +#define BCM6318_UCLK_PHYMIPS 5 +#define BCM6318_UCLK_ROBOSW 6 +#define BCM6318_UCLK_SAR 7 +#define BCM6318_UCLK_SDR 8 +#define BCM6318_UCLK_USB 9 + +#endif /* __DT_BINDINGS_CLOCK_BCM6318_H */ diff --git a/include/dt-bindings/clock/bcm63268-clock.h b/include/dt-bindings/clock/bcm63268-clock.h new file mode 100644 index 000000000000..da23e691d359 --- /dev/null +++ b/include/dt-bindings/clock/bcm63268-clock.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_CLOCK_BCM63268_H +#define __DT_BINDINGS_CLOCK_BCM63268_H + +#define BCM63268_CLK_DIS_GLESS 0 +#define BCM63268_CLK_VDSL_QPROC 1 +#define BCM63268_CLK_VDSL_AFE 2 +#define BCM63268_CLK_VDSL 3 +#define BCM63268_CLK_MIPS 4 +#define BCM63268_CLK_WLAN_OCP 5 +#define BCM63268_CLK_DECT 6 +#define BCM63268_CLK_FAP0 7 +#define BCM63268_CLK_FAP1 8 +#define BCM63268_CLK_SAR 9 +#define BCM63268_CLK_ROBOSW 10 +#define BCM63268_CLK_PCM 11 +#define BCM63268_CLK_USBD 12 +#define BCM63268_CLK_USBH 13 +#define BCM63268_CLK_IPSEC 14 +#define BCM63268_CLK_SPI 15 +#define BCM63268_CLK_HSSPI 16 +#define BCM63268_CLK_PCIE 17 +#define BCM63268_CLK_PHYMIPS 18 +#define BCM63268_CLK_GMAC 19 +#define BCM63268_CLK_NAND 20 +#define BCM63268_CLK_TBUS 27 +#define BCM63268_CLK_ROBOSW250 31 + +#endif /* __DT_BINDINGS_CLOCK_BCM63268_H */ diff --git a/include/dt-bindings/clock/bcm6328-clock.h b/include/dt-bindings/clock/bcm6328-clock.h new file mode 100644 index 000000000000..1f6a3103f3dc --- /dev/null +++ b/include/dt-bindings/clock/bcm6328-clock.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_CLOCK_BCM6328_H +#define __DT_BINDINGS_CLOCK_BCM6328_H + +#define BCM6328_CLK_PHYMIPS 0 +#define BCM6328_CLK_ADSL_QPROC 1 +#define BCM6328_CLK_ADSL_AFE 2 +#define BCM6328_CLK_ADSL 3 +#define BCM6328_CLK_MIPS 4 +#define BCM6328_CLK_SAR 5 +#define BCM6328_CLK_PCM 6 +#define BCM6328_CLK_USBD 7 +#define BCM6328_CLK_USBH 8 +#define BCM6328_CLK_HSSPI 9 +#define BCM6328_CLK_PCIE 10 +#define BCM6328_CLK_ROBOSW 11 + +#endif /* __DT_BINDINGS_CLOCK_BCM6328_H */ diff --git a/include/dt-bindings/clock/bcm6358-clock.h b/include/dt-bindings/clock/bcm6358-clock.h new file mode 100644 index 000000000000..980c9cac4765 --- /dev/null +++ b/include/dt-bindings/clock/bcm6358-clock.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_CLOCK_BCM6358_H +#define __DT_BINDINGS_CLOCK_BCM6358_H + +#define BCM6358_CLK_ENET 4 +#define BCM6358_CLK_ADSLPHY 5 +#define BCM6358_CLK_PCM 8 +#define BCM6358_CLK_SPI 9 +#define BCM6358_CLK_USBS 10 +#define BCM6358_CLK_SAR 11 +#define BCM6358_CLK_EMUSB 17 +#define BCM6358_CLK_ENET0 18 +#define BCM6358_CLK_ENET1 19 +#define BCM6358_CLK_USBSU 20 +#define BCM6358_CLK_EPHY 21 + +#endif /* __DT_BINDINGS_CLOCK_BCM6358_H */ diff --git a/include/dt-bindings/clock/bcm6362-clock.h b/include/dt-bindings/clock/bcm6362-clock.h new file mode 100644 index 000000000000..17655cd5bf25 --- /dev/null +++ b/include/dt-bindings/clock/bcm6362-clock.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_CLOCK_BCM6362_H +#define __DT_BINDINGS_CLOCK_BCM6362_H + +#define BCM6362_CLK_ADSL_QPROC 1 +#define BCM6362_CLK_ADSL_AFE 2 +#define BCM6362_CLK_ADSL 3 +#define BCM6362_CLK_MIPS 4 +#define BCM6362_CLK_WLAN_OCP 5 +#define BCM6362_CLK_SWPKT_USB 7 +#define BCM6362_CLK_SWPKT_SAR 8 +#define BCM6362_CLK_SAR 9 +#define BCM6362_CLK_ROBOSW 10 +#define BCM6362_CLK_PCM 11 +#define BCM6362_CLK_USBD 12 +#define BCM6362_CLK_USBH 13 +#define BCM6362_CLK_IPSEC 14 +#define BCM6362_CLK_SPI 15 +#define BCM6362_CLK_HSSPI 16 +#define BCM6362_CLK_PCIE 17 +#define BCM6362_CLK_FAP 18 +#define BCM6362_CLK_PHYMIPS 19 +#define BCM6362_CLK_NAND 20 + +#endif /* __DT_BINDINGS_CLOCK_BCM6362_H */ diff --git a/include/dt-bindings/clock/bcm6368-clock.h b/include/dt-bindings/clock/bcm6368-clock.h new file mode 100644 index 000000000000..f161d5333883 --- /dev/null +++ b/include/dt-bindings/clock/bcm6368-clock.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_CLOCK_BCM6368_H +#define __DT_BINDINGS_CLOCK_BCM6368_H + +#define BCM6368_CLK_VDSL_QPROC 2 +#define BCM6368_CLK_VDSL_AFE 3 +#define BCM6368_CLK_VDSL_BONDING 4 +#define BCM6368_CLK_VDSL 5 +#define BCM6368_CLK_PHYMIPS 6 +#define BCM6368_CLK_SWPKT_USB 7 +#define BCM6368_CLK_SWPKT_SAR 8 +#define BCM6368_CLK_SPI 9 +#define BCM6368_CLK_USBD 10 +#define BCM6368_CLK_SAR 11 +#define BCM6368_CLK_ROBOSW 12 +#define BCM6368_CLK_UTOPIA 13 +#define BCM6368_CLK_PCM 14 +#define BCM6368_CLK_USBH 15 +#define BCM6368_CLK_DIS_GLESS 16 +#define BCM6368_CLK_NAND 17 +#define BCM6368_CLK_IPSEC 18 + +#endif /* __DT_BINDINGS_CLOCK_BCM6368_H */ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index bd1ee9039558..6f815be99b77 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -189,7 +189,7 @@ struct clk_duty { * and >= numerator) Return 0 on success, otherwise -EERROR. * * @init: Perform platform-specific initialization magic. - * This is not not used by any of the basic clock types. + * This is not used by any of the basic clock types. * This callback exist for HW which needs to perform some * initialisation magic for CCF to get an accurate view of the * clock. It may also be used dynamic resource allocation is diff --git a/drivers/reset/reset-simple.h b/include/linux/reset/reset-simple.h index 08ccb25a55e6..c3e44f45b0f7 100644 --- a/drivers/reset/reset-simple.h +++ b/include/linux/reset/reset-simple.h @@ -27,6 +27,12 @@ * @status_active_low: if true, bits read back as cleared while the reset is * asserted. Otherwise, bits read back as set while the * reset is asserted. + * @reset_us: Minimum delay in microseconds needed that needs to be + * waited for between an assert and a deassert to reset the + * device. If multiple consumers with different delay + * requirements are connected to this controller, it must + * be the largest minimum delay. 0 means that such a delay is + * unknown and the reset operation is unsupported. */ struct reset_simple_data { spinlock_t lock; @@ -34,6 +40,7 @@ struct reset_simple_data { struct reset_controller_dev rcdev; bool active_low; bool status_active_low; + unsigned int reset_us; }; extern const struct reset_control_ops reset_simple_ops; |