diff options
-rw-r--r-- | Documentation/kernel-parameters.txt | 2 | ||||
-rw-r--r-- | Documentation/usb/gadget_multi.txt | 2 | ||||
-rw-r--r-- | drivers/usb/class/cdc-acm.c | 4 | ||||
-rw-r--r-- | drivers/usb/core/hcd-pci.c | 9 | ||||
-rw-r--r-- | drivers/usb/host/xhci-mem.c | 6 | ||||
-rw-r--r-- | drivers/usb/host/xhci-pci.c | 5 | ||||
-rw-r--r-- | drivers/usb/host/xhci-plat.c | 13 | ||||
-rw-r--r-- | drivers/usb/host/xhci-plat.h | 2 | ||||
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 3 | ||||
-rw-r--r-- | drivers/usb/host/xhci.c | 24 | ||||
-rw-r--r-- | drivers/usb/host/xhci.h | 2 | ||||
-rw-r--r-- | drivers/usb/storage/uas.c | 21 | ||||
-rw-r--r-- | drivers/usb/storage/unusual_uas.h | 7 | ||||
-rw-r--r-- | drivers/usb/storage/usb.c | 5 | ||||
-rw-r--r-- | include/linux/usb_usual.h | 2 |
15 files changed, 94 insertions, 13 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index ecc74fa4bfde..0b3de80ec8f6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -4077,6 +4077,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. sector if the number is odd); i = IGNORE_DEVICE (don't bind to this device); + j = NO_REPORT_LUNS (don't use report luns + command, uas only); l = NOT_LOCKABLE (don't try to lock and unlock ejectable media); m = MAX_SECTORS_64 (don't transfer more diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt index 7d66a8636cb5..5faf514047e9 100644 --- a/Documentation/usb/gadget_multi.txt +++ b/Documentation/usb/gadget_multi.txt @@ -43,7 +43,7 @@ For the gadget two work under Windows two conditions have to be met: First of all, Windows need to detect the gadget as an USB composite gadget which on its own have some conditions[4]. If they are met, Windows lets USB Generic Parent Driver[5] handle the device which then -tries to much drivers for each individual interface (sort of, don't +tries to match drivers for each individual interface (sort of, don't get into too many details). The good news is: you do not have to worry about most of the diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 83fd30b0577c..a6c4a1b895bd 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -744,11 +744,15 @@ static void acm_tty_flush_chars(struct tty_struct *tty) int err; unsigned long flags; + if (!cur) /* nothing to do */ + return; + acm->putbuffer = NULL; err = usb_autopm_get_interface_async(acm->control); spin_lock_irqsave(&acm->write_lock, flags); if (err < 0) { cur->use = 0; + acm->putbuffer = cur; goto out; } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index f9d42cf23e55..7859d738df41 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -73,6 +73,15 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd, if (companion->bus != pdev->bus || PCI_SLOT(companion->devfn) != slot) continue; + + /* + * Companion device should be either UHCI,OHCI or EHCI host + * controller, otherwise skip. + */ + if (companion->class != CL_UHCI && companion->class != CL_OHCI && + companion->class != CL_EHCI) + continue; + companion_hcd = pci_get_drvdata(companion); if (!companion_hcd || !companion_hcd->self.root_hub) continue; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 80c1de239e9a..bad0d1f9a41d 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1861,6 +1861,12 @@ no_bw: kfree(xhci->rh_bw); kfree(xhci->ext_caps); + xhci->usb2_ports = NULL; + xhci->usb3_ports = NULL; + xhci->port_array = NULL; + xhci->rh_bw = NULL; + xhci->ext_caps = NULL; + xhci->page_size = 0; xhci->page_shift = 0; xhci->bus_state[0].bus_suspended = 0; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index f0640b7a1c42..48672fac7ff3 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -48,6 +48,7 @@ #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 +#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 static const char hcd_name[] = "xhci_hcd"; @@ -155,7 +156,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && @@ -302,6 +304,7 @@ static void xhci_pci_remove(struct pci_dev *dev) struct xhci_hcd *xhci; xhci = hcd_to_xhci(pci_get_drvdata(dev)); + xhci->xhc_state |= XHCI_STATE_REMOVING; if (xhci->shared_hcd) { usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 5c15e9bc5f7a..474b5fa14900 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -39,12 +39,25 @@ static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) { + struct usb_hcd *hcd = xhci_to_hcd(xhci); + /* * As of now platform drivers don't provide MSI support so we ensure * here that the generic code does not try to make a pci_dev from our * dev struct in order to setup MSI */ xhci->quirks |= XHCI_PLAT; + + /* + * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set + * to 1. However, these SoCs don't support 64-bit address memory + * pointers. So, this driver clears the AC64 bit of xhci->hcc_params + * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in + * xhci_gen_setup(). + */ + if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) || + xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3)) + xhci->quirks |= XHCI_NO_64BIT_SUPPORT; } /* called during probe() after chip reset completes */ diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index 5a2e2e3936c4..529c3c40f901 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -14,7 +14,7 @@ #include "xhci.h" /* for hcd_to_xhci() */ enum xhci_plat_type { - XHCI_PLAT_TYPE_MARVELL_ARMADA, + XHCI_PLAT_TYPE_MARVELL_ARMADA = 1, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3, }; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 7cf66212ceae..99b4ff42f7a0 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -4004,7 +4004,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, int reserved_trbs = xhci->cmd_ring_reserved_trbs; int ret; - if (xhci->xhc_state) { + if ((xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n"); return -ESHUTDOWN; } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d51ee0c3cf9f..9e71c96ad74a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -147,7 +147,8 @@ static int xhci_start(struct xhci_hcd *xhci) "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); if (!ret) - xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING); + /* clear state flags. Including dying, halted or removing */ + xhci->xhc_state = 0; return ret; } @@ -1108,8 +1109,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Resume root hubs only when have pending events. */ status = readl(&xhci->op_regs->status); if (status & STS_EINT) { - usb_hcd_resume_root_hub(hcd); usb_hcd_resume_root_hub(xhci->shared_hcd); + usb_hcd_resume_root_hub(hcd); } } @@ -1124,10 +1125,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Re-enable port polling. */ xhci_dbg(xhci, "%s: starting port polling.\n", __func__); - set_bit(HCD_FLAG_POLL_RH, &hcd->flags); - usb_hcd_poll_rh_status(hcd); set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); usb_hcd_poll_rh_status(xhci->shared_hcd); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); return retval; } @@ -2773,7 +2774,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) if (ret <= 0) return ret; xhci = hcd_to_xhci(hcd); - if (xhci->xhc_state & XHCI_STATE_DYING) + if ((xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_REMOVING)) return -ENODEV; xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); @@ -3820,7 +3822,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_lock(&xhci->mutex); - if (xhci->xhc_state) /* dying or halted */ + if (xhci->xhc_state) /* dying, removing or halted */ goto out; if (!udev->slot_id) { @@ -4948,6 +4950,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) return retval; xhci_dbg(xhci, "Reset complete\n"); + /* + * On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) + * of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit + * address memory pointers actually. So, this driver clears the AC64 + * bit of xhci->hcc_params to call dma_set_coherent_mask(dev, + * DMA_BIT_MASK(32)) in this xhci_gen_setup(). + */ + if (xhci->quirks & XHCI_NO_64BIT_SUPPORT) + xhci->hcc_params &= ~BIT(0); + /* Set dma_mask and coherent_dma_mask to 64-bits, * if xHC supports 64-bit addressing */ if (HCC_64BIT_ADDR(xhci->hcc_params) && diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index e293e0974f48..6c629c97f8ad 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1605,6 +1605,7 @@ struct xhci_hcd { */ #define XHCI_STATE_DYING (1 << 0) #define XHCI_STATE_HALTED (1 << 1) +#define XHCI_STATE_REMOVING (1 << 2) /* Statistics */ int error_bitmask; unsigned int quirks; @@ -1641,6 +1642,7 @@ struct xhci_hcd { #define XHCI_PME_STUCK_QUIRK (1 << 20) #define XHCI_MTK_HOST (1 << 21) #define XHCI_SSIC_PORT_UNUSED (1 << 22) +#define XHCI_NO_64BIT_SUPPORT (1 << 23) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 13e4cc31bc79..16bc679dc2fc 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -2,7 +2,7 @@ * USB Attached SCSI * Note that this is not the same as the USB Mass Storage driver * - * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2014 + * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016 * Copyright Matthew Wilcox for Intel Corp, 2010 * Copyright Sarah Sharp for Intel Corp, 2010 * @@ -781,6 +781,17 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) return SUCCESS; } +static int uas_target_alloc(struct scsi_target *starget) +{ + struct uas_dev_info *devinfo = (struct uas_dev_info *) + dev_to_shost(starget->dev.parent)->hostdata; + + if (devinfo->flags & US_FL_NO_REPORT_LUNS) + starget->no_report_luns = 1; + + return 0; +} + static int uas_slave_alloc(struct scsi_device *sdev) { struct uas_dev_info *devinfo = @@ -824,7 +835,6 @@ static int uas_slave_configure(struct scsi_device *sdev) if (devinfo->flags & US_FL_BROKEN_FUA) sdev->broken_fua = 1; - scsi_change_queue_depth(sdev, devinfo->qdepth - 2); return 0; } @@ -832,6 +842,7 @@ static struct scsi_host_template uas_host_template = { .module = THIS_MODULE, .name = "uas", .queuecommand = uas_queuecommand, + .target_alloc = uas_target_alloc, .slave_alloc = uas_slave_alloc, .slave_configure = uas_slave_configure, .eh_abort_handler = uas_eh_abort_handler, @@ -956,6 +967,12 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) if (result) goto set_alt0; + /* + * 1 tag is reserved for untagged commands + + * 1 tag to avoid off by one errors in some bridge firmwares + */ + shost->can_queue = devinfo->qdepth - 2; + usb_set_intfdata(intf, shost); result = scsi_add_host(shost, &intf->dev); if (result) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index ccc113e83d88..53341a77d89f 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -64,6 +64,13 @@ UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: David Webb <djw@noc.ac.uk> */ +UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, + "Seagate", + "Expansion Desk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_LUNS), + /* Reported-by: Hans de Goede <hdegoede@redhat.com> */ UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999, "Seagate", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 43576ed31ccd..9de988a0f856 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -482,7 +482,7 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE | US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES | - US_FL_MAX_SECTORS_240); + US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS); p = quirks; while (*p) { @@ -532,6 +532,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) case 'i': f |= US_FL_IGNORE_DEVICE; break; + case 'j': + f |= US_FL_NO_REPORT_LUNS; + break; case 'l': f |= US_FL_NOT_LOCKABLE; break; diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 7f5f78bd15ad..245f57dbbb61 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -79,6 +79,8 @@ /* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */ \ US_FLAG(MAX_SECTORS_240, 0x08000000) \ /* Sets max_sectors to 240 */ \ + US_FLAG(NO_REPORT_LUNS, 0x10000000) \ + /* Cannot handle REPORT_LUNS */ \ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; |