summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mtd/atmel-nand.txt31
-rw-r--r--Documentation/devicetree/bindings/mtd/fsl-quadspi.txt5
-rw-r--r--Documentation/devicetree/bindings/mtd/qcom_nandc.txt86
-rw-r--r--arch/arm/plat-samsung/devs.c9
-rw-r--r--arch/mips/include/asm/mach-jz4740/jz4740_nand.h2
-rw-r--r--drivers/memory/fsl_ifc.c2
-rw-r--r--drivers/mtd/Kconfig2
-rw-r--r--drivers/mtd/bcm47xxpart.c42
-rw-r--r--drivers/mtd/bcm63xxpart.c182
-rw-r--r--drivers/mtd/devices/docg3.c5
-rw-r--r--drivers/mtd/devices/mtdram.c5
-rw-r--r--drivers/mtd/mtdpart.c5
-rw-r--r--drivers/mtd/mtdswap.c24
-rw-r--r--drivers/mtd/nand/Kconfig10
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/atmel_nand.c89
-rw-r--r--drivers/mtd/nand/atmel_nand_ecc.h9
-rw-r--r--drivers/mtd/nand/atmel_nand_nfc.h3
-rw-r--r--drivers/mtd/nand/brcmnand/brcmnand.c42
-rw-r--r--drivers/mtd/nand/cafe_nand.c2
-rw-r--r--drivers/mtd/nand/diskonchip.c2
-rw-r--r--drivers/mtd/nand/docg4.c3
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c73
-rw-r--r--drivers/mtd/nand/hisi504_nand.c1
-rw-r--r--drivers/mtd/nand/jz4740_nand.c3
-rw-r--r--drivers/mtd/nand/lpc32xx_mlc.c2
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c7
-rw-r--r--drivers/mtd/nand/nand_base.c78
-rw-r--r--drivers/mtd/nand/nand_bbt.c2
-rw-r--r--drivers/mtd/nand/nand_bch.c27
-rw-r--r--drivers/mtd/nand/nand_ids.c4
-rw-r--r--drivers/mtd/nand/nuc900_nand.c2
-rw-r--r--drivers/mtd/nand/omap2.c28
-rw-r--r--drivers/mtd/nand/plat_nand.c1
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c191
-rw-r--r--drivers/mtd/nand/qcom_nandc.c2223
-rw-r--r--drivers/mtd/nand/s3c2410.c3
-rw-r--r--drivers/mtd/nand/sunxi_nand.c287
-rw-r--r--drivers/mtd/nand/vf610_nfc.c2
-rw-r--r--drivers/mtd/onenand/onenand_base.c32
-rw-r--r--drivers/mtd/onenand/onenand_bbt.c5
-rw-r--r--drivers/mtd/spi-nor/Kconfig3
-rw-r--r--drivers/mtd/spi-nor/fsl-quadspi.c167
-rw-r--r--drivers/mtd/spi-nor/mtk-quadspi.c4
-rw-r--r--drivers/mtd/spi-nor/spi-nor.c246
-rw-r--r--drivers/mtd/tests/oobtest.c49
-rw-r--r--drivers/staging/mt29f_spinand/mt29f_spinand.c1
-rw-r--r--drivers/staging/mt29f_spinand/mt29f_spinand.h1
-rw-r--r--fs/jffs2/gc.c64
-rw-r--r--fs/jffs2/jffs2_fs_sb.h2
-rw-r--r--fs/jffs2/nodemgmt.c4
-rw-r--r--fs/jffs2/wbuf.c6
-rw-r--r--include/linux/mtd/bbm.h1
-rw-r--r--include/linux/mtd/inftl.h1
-rw-r--r--include/linux/mtd/map.h7
-rw-r--r--include/linux/mtd/mtd.h6
-rw-r--r--include/linux/mtd/nand.h10
-rw-r--r--include/linux/mtd/nand_bch.h8
-rw-r--r--include/linux/mtd/nftl.h1
-rw-r--r--include/linux/mtd/spi-nor.h2
-rw-r--r--include/linux/platform_data/mtd-nand-s3c2410.h1
61 files changed, 3524 insertions, 592 deletions
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 7d4c8eb775a5..d53aba98fbc9 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -1,7 +1,10 @@
Atmel NAND flash
Required properties:
-- compatible : should be "atmel,at91rm9200-nand" or "atmel,sama5d4-nand".
+- compatible: The possible values are:
+ "atmel,at91rm9200-nand"
+ "atmel,sama5d2-nand"
+ "atmel,sama5d4-nand"
- reg : should specify localbus address and size used for the chip,
and hardware ECC controller if available.
If the hardware ECC is PMECC, it should contain address and size for
@@ -21,10 +24,11 @@ Optional properties:
- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.
Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
"soft_bch".
-- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware.
- Only supported by at91sam9x5 or later sam9 product.
+- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware,
+ capable of BCH encoding and decoding, on devices where it is present.
- atmel,pmecc-cap : error correct capability for Programmable Multibit ECC
- Controller. Supported values are: 2, 4, 8, 12, 24.
+ Controller. Supported values are: 2, 4, 8, 12, 24. If the compatible string
+ is "atmel,sama5d2-nand", 32 is also valid.
- atmel,pmecc-sector-size : sector size for ECC computation. Supported values
are: 512, 1024.
- atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM
@@ -32,15 +36,16 @@ Optional properties:
sector size 1024. If not specified, driver will build the table in runtime.
- nand-bus-width : 8 or 16 bus width if not present 8
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
-- Nand Flash Controller(NFC) is a slave driver under Atmel nand flash
- - Required properties:
- - compatible : "atmel,sama5d3-nfc".
- - reg : should specify the address and size used for NFC command registers,
- NFC registers and NFC Sram. NFC Sram address and size can be absent
- if don't want to use it.
- - clocks: phandle to the peripheral clock
- - Optional properties:
- - atmel,write-by-sram: boolean to enable NFC write by sram.
+
+Nand Flash Controller(NFC) is an optional sub-node
+Required properties:
+- compatible : "atmel,sama5d3-nfc" or "atmel,sama5d4-nfc".
+- reg : should specify the address and size used for NFC command registers,
+ NFC registers and NFC SRAM. NFC SRAM address and size can be absent
+ if don't want to use it.
+- clocks: phandle to the peripheral clock
+Optional properties:
+- atmel,write-by-sram: boolean to enable NFC write by SRAM.
Examples:
nand0: nand@40000000,0 {
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 00c587b3d3ae..0333ec87dc49 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -3,7 +3,9 @@
Required properties:
- compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
"fsl,imx7d-qspi", "fsl,imx6ul-qspi",
- "fsl,ls1021-qspi"
+ "fsl,ls1021a-qspi"
+ or
+ "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi"
- reg : the first contains the register location and length,
the second contains the memory mapping address and length
- reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
@@ -19,6 +21,7 @@ Optional properties:
But if there are two NOR flashes connected to the
bus, you should enable this property.
(Please check the board's schematic.)
+ - big-endian : That means the IP register is big endian
Example:
diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
new file mode 100644
index 000000000000..70dd5118a324
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
@@ -0,0 +1,86 @@
+* Qualcomm NAND controller
+
+Required properties:
+- compatible: should be "qcom,ipq806x-nand"
+- reg: MMIO address range
+- clocks: must contain core clock and always on clock
+- clock-names: must contain "core" for the core clock and "aon" for the
+ always on clock
+- dmas: DMA specifier, consisting of a phandle to the ADM DMA
+ controller node and the channel number to be used for
+ NAND. Refer to dma.txt and qcom_adm.txt for more details
+- dma-names: must be "rxtx"
+- qcom,cmd-crci: must contain the ADM command type CRCI block instance
+ number specified for the NAND controller on the given
+ platform
+- qcom,data-crci: must contain the ADM data type CRCI block instance
+ number specified for the NAND controller on the given
+ platform
+- #address-cells: <1> - subnodes give the chip-select number
+- #size-cells: <0>
+
+* NAND chip-select
+
+Each controller may contain one or more subnodes to represent enabled
+chip-selects which (may) contain NAND flash chips. Their properties are as
+follows.
+
+Required properties:
+- compatible: should contain "qcom,nandcs"
+- reg: a single integer representing the chip-select
+ number (e.g., 0, 1, 2, etc.)
+- #address-cells: see partition.txt
+- #size-cells: see partition.txt
+- nand-ecc-strength: see nand.txt
+- nand-ecc-step-size: must be 512. see nand.txt for more details.
+
+Optional properties:
+- nand-bus-width: see nand.txt
+
+Each nandcs device node may optionally contain a 'partitions' sub-node, which
+further contains sub-nodes describing the flash partition mapping. See
+partition.txt for more detail.
+
+Example:
+
+nand@1ac00000 {
+ compatible = "qcom,ebi2-nandc";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nandcs@0 {
+ compatible = "qcom,nandcs";
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot-nand";
+ reg = <0 0x58a0000>;
+ };
+
+ partition@58a0000 {
+ label = "fs-nand";
+ reg = <0x58a0000 0x4000000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index b53d4ff3befb..84baa16f4c0b 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -727,15 +727,6 @@ static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
return -ENOMEM;
}
- if (set->ecc_layout) {
- ptr = kmemdup(set->ecc_layout,
- sizeof(struct nand_ecclayout), GFP_KERNEL);
- set->ecc_layout = ptr;
-
- if (!ptr)
- return -ENOMEM;
- }
-
return 0;
}
diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
index 79cff26d8b36..398733e3e2cf 100644
--- a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
@@ -25,8 +25,6 @@ struct jz_nand_platform_data {
int num_partitions;
struct mtd_partition *partitions;
- struct nand_ecclayout *ecc_layout;
-
unsigned char banks[JZ_NAND_NUM_BANKS];
void (*ident_callback)(struct platform_device *, struct nand_chip *,
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index acd1460cf787..2a691da8c1c7 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -260,7 +260,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
/* get the Controller level irq */
fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
- if (fsl_ifc_ctrl_dev->irq == NO_IRQ) {
+ if (fsl_ifc_ctrl_dev->irq == 0) {
dev_err(&dev->dev, "failed to get irq resource "
"for IFC\n");
ret = -ENODEV;
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 42cc953309f1..e83a279f1217 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -142,7 +142,7 @@ config MTD_AR7_PARTS
config MTD_BCM63XX_PARTS
tristate "BCM63XX CFE partitioning support"
- depends on BCM63XX
+ depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
select CRC32
help
This provides partions parsing for BCM63xx devices with CFE
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 8282f47bcf5d..845dd27d9f41 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -66,11 +66,13 @@ static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
{
uint32_t buf;
size_t bytes_read;
+ int err;
- if (mtd_read(master, offset, sizeof(buf), &bytes_read,
- (uint8_t *)&buf) < 0) {
- pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
- offset);
+ err = mtd_read(master, offset, sizeof(buf), &bytes_read,
+ (uint8_t *)&buf);
+ if (err && !mtd_is_bitflip(err)) {
+ pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
+ offset, err);
goto out_default;
}
@@ -95,6 +97,7 @@ static int bcm47xxpart_parse(struct mtd_info *master,
int trx_part = -1;
int last_trx_part = -1;
int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
+ int err;
/*
* Some really old flashes (like AT45DB*) had smaller erasesize-s, but
@@ -118,8 +121,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
/* Parse block by block looking for magics */
for (offset = 0; offset <= master->size - blocksize;
offset += blocksize) {
- /* Nothing more in higher memory */
- if (offset >= 0x2000000)
+ /* Nothing more in higher memory on BCM47XX (MIPS) */
+ if (config_enabled(CONFIG_BCM47XX) && offset >= 0x2000000)
break;
if (curr_part >= BCM47XXPART_MAX_PARTS) {
@@ -128,10 +131,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
}
/* Read beginning of the block */
- if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
- &bytes_read, (uint8_t *)buf) < 0) {
- pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
- offset);
+ err = mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
+ &bytes_read, (uint8_t *)buf);
+ if (err && !mtd_is_bitflip(err)) {
+ pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
+ offset, err);
continue;
}
@@ -254,10 +258,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
}
/* Read middle of the block */
- if (mtd_read(master, offset + 0x8000, 0x4,
- &bytes_read, (uint8_t *)buf) < 0) {
- pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
- offset);
+ err = mtd_read(master, offset + 0x8000, 0x4, &bytes_read,
+ (uint8_t *)buf);
+ if (err && !mtd_is_bitflip(err)) {
+ pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
+ offset, err);
continue;
}
@@ -277,10 +282,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
}
offset = master->size - possible_nvram_sizes[i];
- if (mtd_read(master, offset, 0x4, &bytes_read,
- (uint8_t *)buf) < 0) {
- pr_err("mtd_read error while reading at offset 0x%X!\n",
- offset);
+ err = mtd_read(master, offset, 0x4, &bytes_read,
+ (uint8_t *)buf);
+ if (err && !mtd_is_bitflip(err)) {
+ pr_err("mtd_read error while reading (offset 0x%X): %d\n",
+ offset, err);
continue;
}
diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/bcm63xxpart.c
index cec3188a170d..41d1d3149c61 100644
--- a/drivers/mtd/bcm63xxpart.c
+++ b/drivers/mtd/bcm63xxpart.c
@@ -24,6 +24,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/bcm963xx_nvram.h>
#include <linux/bcm963xx_tag.h>
#include <linux/crc32.h>
#include <linux/module.h>
@@ -34,12 +35,15 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <asm/mach-bcm63xx/bcm63xx_nvram.h>
-#include <asm/mach-bcm63xx/board_bcm963xx.h>
+#define BCM963XX_CFE_BLOCK_SIZE SZ_64K /* always at least 64KiB */
-#define BCM63XX_CFE_BLOCK_SIZE SZ_64K /* always at least 64KiB */
+#define BCM963XX_CFE_MAGIC_OFFSET 0x4e0
+#define BCM963XX_CFE_VERSION_OFFSET 0x570
+#define BCM963XX_NVRAM_OFFSET 0x580
-#define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
+/* Ensure strings read from flash structs are null terminated */
+#define STR_NULL_TERMINATE(x) \
+ do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
static int bcm63xx_detect_cfe(struct mtd_info *master)
{
@@ -58,68 +62,130 @@ static int bcm63xx_detect_cfe(struct mtd_info *master)
return 0;
/* very old CFE's do not have the cfe-v string, so check for magic */
- ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
+ ret = mtd_read(master, BCM963XX_CFE_MAGIC_OFFSET, 8, &retlen,
(void *)buf);
buf[retlen] = 0;
return strncmp("CFE1CFE1", buf, 8);
}
-static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
- const struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
+static int bcm63xx_read_nvram(struct mtd_info *master,
+ struct bcm963xx_nvram *nvram)
+{
+ u32 actual_crc, expected_crc;
+ size_t retlen;
+ int ret;
+
+ /* extract nvram data */
+ ret = mtd_read(master, BCM963XX_NVRAM_OFFSET, BCM963XX_NVRAM_V5_SIZE,
+ &retlen, (void *)nvram);
+ if (ret)
+ return ret;
+
+ ret = bcm963xx_nvram_checksum(nvram, &expected_crc, &actual_crc);
+ if (ret)
+ pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
+ expected_crc, actual_crc);
+
+ if (!nvram->psi_size)
+ nvram->psi_size = BCM963XX_DEFAULT_PSI_SIZE;
+
+ return 0;
+}
+
+static int bcm63xx_read_image_tag(struct mtd_info *master, const char *name,
+ loff_t tag_offset, struct bcm_tag *buf)
+{
+ int ret;
+ size_t retlen;
+ u32 computed_crc;
+
+ ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
+ if (ret)
+ return ret;
+
+ if (retlen != sizeof(*buf))
+ return -EIO;
+
+ computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
+ offsetof(struct bcm_tag, header_crc));
+ if (computed_crc == buf->header_crc) {
+ STR_NULL_TERMINATE(buf->board_id);
+ STR_NULL_TERMINATE(buf->tag_version);
+
+ pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
+ name, tag_offset, buf->tag_version, buf->board_id);
+
+ return 0;
+ }
+
+ pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
+ name, tag_offset, buf->header_crc, computed_crc);
+ return 1;
+}
+
+static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts, struct bcm963xx_nvram *nvram)
{
/* CFE, NVRAM and global Linux are always present */
int nrparts = 3, curpart = 0;
- struct bcm_tag *buf;
+ struct bcm_tag *buf = NULL;
struct mtd_partition *parts;
int ret;
- size_t retlen;
unsigned int rootfsaddr, kerneladdr, spareaddr;
unsigned int rootfslen, kernellen, sparelen, totallen;
unsigned int cfelen, nvramlen;
unsigned int cfe_erasesize;
int i;
- u32 computed_crc;
bool rootfs_first = false;
- if (bcm63xx_detect_cfe(master))
- return -EINVAL;
-
cfe_erasesize = max_t(uint32_t, master->erasesize,
- BCM63XX_CFE_BLOCK_SIZE);
+ BCM963XX_CFE_BLOCK_SIZE);
cfelen = cfe_erasesize;
- nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
+ nvramlen = nvram->psi_size * SZ_1K;
nvramlen = roundup(nvramlen, cfe_erasesize);
- /* Allocate memory for buffer */
buf = vmalloc(sizeof(struct bcm_tag));
if (!buf)
return -ENOMEM;
/* Get the tag */
- ret = mtd_read(master, cfelen, sizeof(struct bcm_tag), &retlen,
- (void *)buf);
-
- if (retlen != sizeof(struct bcm_tag)) {
- vfree(buf);
- return -EIO;
- }
+ ret = bcm63xx_read_image_tag(master, "rootfs", cfelen, buf);
+ if (!ret) {
+ STR_NULL_TERMINATE(buf->flash_image_start);
+ if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
+ rootfsaddr < BCM963XX_EXTENDED_SIZE) {
+ pr_err("invalid rootfs address: %*ph\n",
+ (int)sizeof(buf->flash_image_start),
+ buf->flash_image_start);
+ goto invalid_tag;
+ }
- computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
- offsetof(struct bcm_tag, header_crc));
- if (computed_crc == buf->header_crc) {
- char *boardid = &(buf->board_id[0]);
- char *tagversion = &(buf->tag_version[0]);
+ STR_NULL_TERMINATE(buf->kernel_address);
+ if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
+ kerneladdr < BCM963XX_EXTENDED_SIZE) {
+ pr_err("invalid kernel address: %*ph\n",
+ (int)sizeof(buf->kernel_address),
+ buf->kernel_address);
+ goto invalid_tag;
+ }
- sscanf(buf->flash_image_start, "%u", &rootfsaddr);
- sscanf(buf->kernel_address, "%u", &kerneladdr);
- sscanf(buf->kernel_length, "%u", &kernellen);
- sscanf(buf->total_length, "%u", &totallen);
+ STR_NULL_TERMINATE(buf->kernel_length);
+ if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
+ pr_err("invalid kernel length: %*ph\n",
+ (int)sizeof(buf->kernel_length),
+ buf->kernel_length);
+ goto invalid_tag;
+ }
- pr_info("CFE boot tag found with version %s and board type %s\n",
- tagversion, boardid);
+ STR_NULL_TERMINATE(buf->total_length);
+ if (kstrtouint(buf->total_length, 10, &totallen)) {
+ pr_err("invalid total length: %*ph\n",
+ (int)sizeof(buf->total_length),
+ buf->total_length);
+ goto invalid_tag;
+ }
kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
@@ -134,13 +200,14 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
rootfsaddr = kerneladdr + kernellen;
rootfslen = spareaddr - rootfsaddr;
}
- } else {
- pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
- buf->header_crc, computed_crc);
+ } else if (ret > 0) {
+invalid_tag:
kernellen = 0;
rootfslen = 0;
rootfsaddr = 0;
spareaddr = cfelen;
+ } else {
+ goto out;
}
sparelen = master->size - spareaddr - nvramlen;
@@ -151,11 +218,10 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
if (kernellen > 0)
nrparts++;
- /* Ask kernel for more memory */
parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
if (!parts) {
- vfree(buf);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out;
}
/* Start building partition list */
@@ -206,9 +272,43 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
sparelen);
*pparts = parts;
+ ret = 0;
+
+out:
vfree(buf);
+ if (ret)
+ return ret;
+
return nrparts;
+}
+
+static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct bcm963xx_nvram *nvram = NULL;
+ int ret;
+
+ if (bcm63xx_detect_cfe(master))
+ return -EINVAL;
+
+ nvram = vzalloc(sizeof(*nvram));
+ if (!nvram)
+ return -ENOMEM;
+
+ ret = bcm63xx_read_nvram(master, nvram);
+ if (ret)
+ goto out;
+
+ if (!mtd_type_is_nand(master))
+ ret = bcm63xx_parse_cfe_nor_partitions(master, pparts, nvram);
+ else
+ ret = -EINVAL;
+
+out:
+ vfree(nvram);
+ return ret;
};
static struct mtd_part_parser bcm63xx_cfe_parser = {
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index c3a2695a4420..e7b2e439696c 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -72,13 +72,11 @@ MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, "
* @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC)
* @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC)
* @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15
- * @oobavail: 8 available bytes remaining after ECC toll
*/
static struct nand_ecclayout docg3_oobinfo = {
.eccbytes = 8,
.eccpos = {7, 8, 9, 10, 11, 12, 13, 14},
.oobfree = {{0, 7}, {15, 1} },
- .oobavail = 8,
};
static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
@@ -1438,7 +1436,7 @@ static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
oobdelta = mtd->oobsize;
break;
case MTD_OPS_AUTO_OOB:
- oobdelta = mtd->ecclayout->oobavail;
+ oobdelta = mtd->oobavail;
break;
default:
return -EINVAL;
@@ -1860,6 +1858,7 @@ static int __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
mtd->_write_oob = doc_write_oob;
mtd->_block_isbad = doc_block_isbad;
mtd->ecclayout = &docg3_oobinfo;
+ mtd->oobavail = 8;
mtd->ecc_strength = DOC_ECC_BCH_T;
return 0;
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index 627a9bc37679..cbd8547d7aad 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -19,6 +19,7 @@
static unsigned long total_size = CONFIG_MTDRAM_TOTAL_SIZE;
static unsigned long erase_size = CONFIG_MTDRAM_ERASE_SIZE;
+static unsigned long writebuf_size = 64;
#define MTDRAM_TOTAL_SIZE (total_size * 1024)
#define MTDRAM_ERASE_SIZE (erase_size * 1024)
@@ -27,6 +28,8 @@ module_param(total_size, ulong, 0);
MODULE_PARM_DESC(total_size, "Total device size in KiB");
module_param(erase_size, ulong, 0);
MODULE_PARM_DESC(erase_size, "Device erase block size in KiB");
+module_param(writebuf_size, ulong, 0);
+MODULE_PARM_DESC(writebuf_size, "Device write buf size in Bytes (Default: 64)");
#endif
// We could store these in the mtd structure, but we only support 1 device..
@@ -123,7 +126,7 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
mtd->flags = MTD_CAP_RAM;
mtd->size = size;
mtd->writesize = 1;
- mtd->writebufsize = 64; /* Mimic CFI NOR flashes */
+ mtd->writebufsize = writebuf_size;
mtd->erasesize = MTDRAM_ERASE_SIZE;
mtd->priv = mapped_address;
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 10bf304027dd..08de4b2cf0f5 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -126,10 +126,7 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
if (ops->oobbuf) {
size_t len, pages;
- if (ops->mode == MTD_OPS_AUTO_OOB)
- len = mtd->oobavail;
- else
- len = mtd->oobsize;
+ len = mtd_oobavail(mtd, ops);
pages = mtd_div_by_ws(mtd->size, mtd);
pages -= mtd_div_by_ws(from, mtd);
if (ops->ooboffs + ops->ooblen > pages * len)
diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c
index fc8b3d16cce7..cb06bdd21a1b 100644
--- a/drivers/mtd/mtdswap.c
+++ b/drivers/mtd/mtdswap.c
@@ -346,7 +346,7 @@ static int mtdswap_read_markers(struct mtdswap_dev *d, struct swap_eb *eb)
if (mtd_can_have_bb(d->mtd) && mtd_block_isbad(d->mtd, offset))
return MTDSWAP_SCANNED_BAD;
- ops.ooblen = 2 * d->mtd->ecclayout->oobavail;
+ ops.ooblen = 2 * d->mtd->oobavail;
ops.oobbuf = d->oob_buf;
ops.ooboffs = 0;
ops.datbuf = NULL;
@@ -359,7 +359,7 @@ static int mtdswap_read_markers(struct mtdswap_dev *d, struct swap_eb *eb)
data = (struct mtdswap_oobdata *)d->oob_buf;
data2 = (struct mtdswap_oobdata *)
- (d->oob_buf + d->mtd->ecclayout->oobavail);
+ (d->oob_buf + d->mtd->oobavail);
if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) {
eb->erase_count = le32_to_cpu(data->count);
@@ -933,7 +933,7 @@ static unsigned int mtdswap_eblk_passes(struct mtdswap_dev *d,
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = mtd->writesize;
- ops.ooblen = mtd->ecclayout->oobavail;
+ ops.ooblen = mtd->oobavail;
ops.ooboffs = 0;
ops.datbuf = d->page_buf;
ops.oobbuf = d->oob_buf;
@@ -945,7 +945,7 @@ static unsigned int mtdswap_eblk_passes(struct mtdswap_dev *d,
for (i = 0; i < mtd_pages; i++) {
patt = mtdswap_test_patt(test + i);
memset(d->page_buf, patt, mtd->writesize);
- memset(d->oob_buf, patt, mtd->ecclayout->oobavail);
+ memset(d->oob_buf, patt, mtd->oobavail);
ret = mtd_write_oob(mtd, pos, &ops);
if (ret)
goto error;
@@ -964,7 +964,7 @@ static unsigned int mtdswap_eblk_passes(struct mtdswap_dev *d,
if (p1[j] != patt)
goto error;
- for (j = 0; j < mtd->ecclayout->oobavail; j++)
+ for (j = 0; j < mtd->oobavail; j++)
if (p2[j] != (unsigned char)patt)
goto error;
@@ -1387,7 +1387,7 @@ static int mtdswap_init(struct mtdswap_dev *d, unsigned int eblocks,
if (!d->page_buf)
goto page_buf_fail;
- d->oob_buf = kmalloc(2 * mtd->ecclayout->oobavail, GFP_KERNEL);
+ d->oob_buf = kmalloc(2 * mtd->oobavail, GFP_KERNEL);
if (!d->oob_buf)
goto oob_buf_fail;
@@ -1417,7 +1417,6 @@ static void mtdswap_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
unsigned long part;
unsigned int eblocks, eavailable, bad_blocks, spare_cnt;
uint64_t swap_size, use_size, size_limit;
- struct nand_ecclayout *oinfo;
int ret;
parts = &partitions[0];
@@ -1447,17 +1446,10 @@ static void mtdswap_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
return;
}
- oinfo = mtd->ecclayout;
- if (!oinfo) {
- printk(KERN_ERR "%s: mtd%d does not have OOB\n",
- MTDSWAP_PREFIX, mtd->index);
- return;
- }
-
- if (!mtd->oobsize || oinfo->oobavail < MTDSWAP_OOBSIZE) {
+ if (!mtd->oobsize || mtd->oobavail < MTDSWAP_OOBSIZE) {
printk(KERN_ERR "%s: Not enough free bytes in OOB, "
"%d available, %zu needed.\n",
- MTDSWAP_PREFIX, oinfo->oobavail, MTDSWAP_OOBSIZE);
+ MTDSWAP_PREFIX, mtd->oobavail, MTDSWAP_OOBSIZE);
return;
}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 20f01b3ec23d..f05e0e9eb2f7 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -74,6 +74,7 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR
config MTD_NAND_GPIO
tristate "GPIO assisted NAND Flash driver"
depends on GPIOLIB || COMPILE_TEST
+ depends on HAS_IOMEM
help
This enables a NAND flash driver where control signals are
connected to GPIO pins, and commands and data are communicated
@@ -310,6 +311,7 @@ config MTD_NAND_CAFE
config MTD_NAND_CS553X
tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
depends on X86_32
+ depends on !UML && HAS_IOMEM
help
The CS553x companion chips for the AMD Geode processor
include NAND flash controllers with built-in hardware ECC
@@ -463,6 +465,7 @@ config MTD_NAND_MPC5121_NFC
config MTD_NAND_VF610_NFC
tristate "Support for Freescale NFC for VF610/MPC5125"
depends on (SOC_VF610 || COMPILE_TEST)
+ depends on HAS_IOMEM
help
Enables support for NAND Flash Controller on some Freescale
processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
@@ -553,4 +556,11 @@ config MTD_NAND_HISI504
help
Enables support for NAND controller on Hisilicon SoC Hip04.
+config MTD_NAND_QCOM
+ tristate "Support for NAND on QCOM SoCs"
+ depends on ARCH_QCOM
+ help
+ Enables support for NAND flash chips on SoCs containing the EBI2 NAND
+ controller. This controller is found on IPQ806x SoC.
+
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 9e3623308509..f55335373f7c 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -56,5 +56,6 @@ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
+obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
nand-objs := nand_base.o nand_bbt.o nand_timings.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index bddcf83d6859..20cbaabb2959 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -65,6 +65,11 @@ module_param(on_flash_bbt, int, 0);
struct atmel_nand_caps {
bool pmecc_correct_erase_page;
+ uint8_t pmecc_max_correction;
+};
+
+struct atmel_nand_nfc_caps {
+ uint32_t rb_mask;
};
/* oob layout for large page size
@@ -111,6 +116,7 @@ struct atmel_nfc {
/* Point to the sram bank which include readed data via NFC */
void *data_in_sram;
bool will_write_sram;
+ const struct atmel_nand_nfc_caps *caps;
};
static struct atmel_nfc nand_nfc;
@@ -140,6 +146,7 @@ struct atmel_nand_host {
int pmecc_cw_len; /* Length of codeword */
void __iomem *pmerrloc_base;
+ void __iomem *pmerrloc_el_base;
void __iomem *pmecc_rom_base;
/* lookup table for alpha_to and index_of */
@@ -468,6 +475,7 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
* 8-bits 13-bytes 14-bytes
* 12-bits 20-bytes 21-bytes
* 24-bits 39-bytes 42-bytes
+ * 32-bits 52-bytes 56-bytes
*/
static int pmecc_get_ecc_bytes(int cap, int sector_size)
{
@@ -813,7 +821,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
sector_size = host->pmecc_sector_size;
while (err_nbr) {
- tmp = pmerrloc_readl_el_relaxed(host->pmerrloc_base, i) - 1;
+ tmp = pmerrloc_readl_el_relaxed(host->pmerrloc_el_base, i) - 1;
byte_pos = tmp / 8;
bit_pos = tmp % 8;
@@ -825,7 +833,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
*(buf + byte_pos) ^= (1 << bit_pos);
pos = sector_num * host->pmecc_sector_size + byte_pos;
- dev_info(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, *(buf + byte_pos));
} else {
/* Bit flip in OOB area */
@@ -835,7 +843,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
ecc[tmp] ^= (1 << bit_pos);
pos = tmp + nand_chip->ecc.layout->eccpos[0];
- dev_info(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
pos, bit_pos, err_byte, ecc[tmp]);
}
@@ -1017,6 +1025,9 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
case 24:
val = PMECC_CFG_BCH_ERR24;
break;
+ case 32:
+ val = PMECC_CFG_BCH_ERR32;
+ break;
}
if (host->pmecc_sector_size == 512)
@@ -1078,6 +1089,9 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host,
/* If device tree doesn't specify, use NAND's minimum ECC parameters */
if (host->pmecc_corr_cap == 0) {
+ if (*cap > host->caps->pmecc_max_correction)
+ return -EINVAL;
+
/* use the most fitable ecc bits (the near bigger one ) */
if (*cap <= 2)
host->pmecc_corr_cap = 2;
@@ -1089,6 +1103,8 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host,
host->pmecc_corr_cap = 12;
else if (*cap <= 24)
host->pmecc_corr_cap = 24;
+ else if (*cap <= 32)
+ host->pmecc_corr_cap = 32;
else
return -EINVAL;
}
@@ -1205,6 +1221,8 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
err_no = PTR_ERR(host->pmerrloc_base);
goto err;
}
+ host->pmerrloc_el_base = host->pmerrloc_base + ATMEL_PMERRLOC_SIGMAx +
+ (host->caps->pmecc_max_correction + 1) * 4;
if (!host->has_no_lookup_table) {
regs_rom = platform_get_resource(pdev, IORESOURCE_MEM, 3);
@@ -1486,8 +1504,6 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
}
-static const struct of_device_id atmel_nand_dt_ids[];
-
static int atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
@@ -1498,7 +1514,7 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
enum of_gpio_flags flags = 0;
host->caps = (struct atmel_nand_caps *)
- of_match_device(atmel_nand_dt_ids, host->dev)->data;
+ of_device_get_match_data(host->dev);
if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
if (val >= 32) {
@@ -1547,10 +1563,16 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
* them from NAND ONFI parameters.
*/
if (of_property_read_u32(np, "atmel,pmecc-cap", &val) == 0) {
- if ((val != 2) && (val != 4) && (val != 8) && (val != 12) &&
- (val != 24)) {
+ if (val > host->caps->pmecc_max_correction) {
dev_err(host->dev,
- "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n",
+ "Required ECC strength too high: %u max %u\n",
+ val, host->caps->pmecc_max_correction);
+ return -EINVAL;
+ }
+ if ((val != 2) && (val != 4) && (val != 8) &&
+ (val != 12) && (val != 24) && (val != 32)) {
+ dev_err(host->dev,
+ "Required ECC strength not supported: %u\n",
val);
return -EINVAL;
}
@@ -1560,7 +1582,7 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) == 0) {
if ((val != 512) && (val != 1024)) {
dev_err(host->dev,
- "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n",
+ "Required ECC sector size not supported: %u\n",
val);
return -EINVAL;
}
@@ -1677,9 +1699,9 @@ static irqreturn_t hsmc_interrupt(int irq, void *dev_id)
nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_XFR_DONE);
ret = IRQ_HANDLED;
}
- if (pending & NFC_SR_RB_EDGE) {
+ if (pending & host->nfc->caps->rb_mask) {
complete(&host->nfc->comp_ready);
- nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_RB_EDGE);
+ nfc_writel(host->nfc->hsmc_regs, IDR, host->nfc->caps->rb_mask);
ret = IRQ_HANDLED;
}
if (pending & NFC_SR_CMD_DONE) {
@@ -1697,7 +1719,7 @@ static void nfc_prepare_interrupt(struct atmel_nand_host *host, u32 flag)
if (flag & NFC_SR_XFR_DONE)
init_completion(&host->nfc->comp_xfer_done);
- if (flag & NFC_SR_RB_EDGE)
+ if (flag & host->nfc->caps->rb_mask)
init_completion(&host->nfc->comp_ready);
if (flag & NFC_SR_CMD_DONE)
@@ -1715,7 +1737,7 @@ static int nfc_wait_interrupt(struct atmel_nand_host *host, u32 flag)
if (flag & NFC_SR_XFR_DONE)
comp[index++] = &host->nfc->comp_xfer_done;
- if (flag & NFC_SR_RB_EDGE)
+ if (flag & host->nfc->caps->rb_mask)
comp[index++] = &host->nfc->comp_ready;
if (flag & NFC_SR_CMD_DONE)
@@ -1783,7 +1805,7 @@ static int nfc_device_ready(struct mtd_info *mtd)
dev_err(host->dev, "Lost the interrupt flags: 0x%08x\n",
mask & status);
- return status & NFC_SR_RB_EDGE;
+ return status & host->nfc->caps->rb_mask;
}
static void nfc_select_chip(struct mtd_info *mtd, int chip)
@@ -1956,8 +1978,8 @@ static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
}
/* fall through */
default:
- nfc_prepare_interrupt(host, NFC_SR_RB_EDGE);
- nfc_wait_interrupt(host, NFC_SR_RB_EDGE);
+ nfc_prepare_interrupt(host, host->nfc->caps->rb_mask);
+ nfc_wait_interrupt(host, host->nfc->caps->rb_mask);
}
}
@@ -2304,17 +2326,34 @@ static int atmel_nand_remove(struct platform_device *pdev)
return 0;
}
+/*
+ * AT91RM9200 does not have PMECC or PMECC Errloc peripherals for
+ * BCH ECC. Combined with the "atmel,has-pmecc", it is used to describe
+ * devices from the SAM9 family that have those.
+ */
static const struct atmel_nand_caps at91rm9200_caps = {
.pmecc_correct_erase_page = false,
+ .pmecc_max_correction = 24,
};
static const struct atmel_nand_caps sama5d4_caps = {
.pmecc_correct_erase_page = true,
+ .pmecc_max_correction = 24,
+};
+
+/*
+ * The PMECC Errloc controller starting in SAMA5D2 is not compatible,
+ * as the increased correction strength requires more registers.
+ */
+static const struct atmel_nand_caps sama5d2_caps = {
+ .pmecc_correct_erase_page = true,
+ .pmecc_max_correction = 32,
};
static const struct of_device_id atmel_nand_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-nand", .data = &at91rm9200_caps },
{ .compatible = "atmel,sama5d4-nand", .data = &sama5d4_caps },
+ { .compatible = "atmel,sama5d2-nand", .data = &sama5d2_caps },
{ /* sentinel */ }
};
@@ -2354,6 +2393,11 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev)
}
}
+ nfc->caps = (const struct atmel_nand_nfc_caps *)
+ of_device_get_match_data(&pdev->dev);
+ if (!nfc->caps)
+ return -ENODEV;
+
nfc_writel(nfc->hsmc_regs, IDR, 0xffffffff);
nfc_readl(nfc->hsmc_regs, SR); /* clear the NFC_SR */
@@ -2382,8 +2426,17 @@ static int atmel_nand_nfc_remove(struct platform_device *pdev)
return 0;
}
+static const struct atmel_nand_nfc_caps sama5d3_nfc_caps = {
+ .rb_mask = NFC_SR_RB_EDGE0,
+};
+
+static const struct atmel_nand_nfc_caps sama5d4_nfc_caps = {
+ .rb_mask = NFC_SR_RB_EDGE3,
+};
+
static const struct of_device_id atmel_nand_nfc_match[] = {
- { .compatible = "atmel,sama5d3-nfc" },
+ { .compatible = "atmel,sama5d3-nfc", .data = &sama5d3_nfc_caps },
+ { .compatible = "atmel,sama5d4-nfc", .data = &sama5d4_nfc_caps },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_nand_nfc_match);
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index 668e7358f19b..834d694487bd 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -43,6 +43,7 @@
#define PMECC_CFG_BCH_ERR8 (2 << 0)
#define PMECC_CFG_BCH_ERR12 (3 << 0)
#define PMECC_CFG_BCH_ERR24 (4 << 0)
+#define PMECC_CFG_BCH_ERR32 (5 << 0)
#define PMECC_CFG_SECTOR512 (0 << 4)
#define PMECC_CFG_SECTOR1024 (1 << 4)
@@ -108,7 +109,11 @@
#define PMERRLOC_ERR_NUM_MASK (0x1f << 8)
#define PMERRLOC_CALC_DONE (1 << 0)
#define ATMEL_PMERRLOC_SIGMAx 0x028 /* Error location SIGMA x */
-#define ATMEL_PMERRLOC_ELx 0x08c /* Error location x */
+
+/*
+ * The ATMEL_PMERRLOC_ELx register location depends from the number of
+ * bits corrected by the PMECC controller. Do not use it.
+ */
/* Register access macros for PMECC */
#define pmecc_readl_relaxed(addr, reg) \
@@ -136,7 +141,7 @@
readl_relaxed((addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4))
#define pmerrloc_readl_el_relaxed(addr, n) \
- readl_relaxed((addr) + ATMEL_PMERRLOC_ELx + ((n) * 4))
+ readl_relaxed((addr) + ((n) * 4))
/* Galois field dimension */
#define PMECC_GF_DIMENSION_13 13
diff --git a/drivers/mtd/nand/atmel_nand_nfc.h b/drivers/mtd/nand/atmel_nand_nfc.h
index 4d5d26221a7e..0bbc1fa97dba 100644
--- a/drivers/mtd/nand/atmel_nand_nfc.h
+++ b/drivers/mtd/nand/atmel_nand_nfc.h
@@ -42,7 +42,8 @@
#define NFC_SR_UNDEF (1 << 21)
#define NFC_SR_AWB (1 << 22)
#define NFC_SR_ASE (1 << 23)
-#define NFC_SR_RB_EDGE (1 << 24)
+#define NFC_SR_RB_EDGE0 (1 << 24)
+#define NFC_SR_RB_EDGE3 (1 << 27)
#define ATMEL_HSMC_NFC_IER 0x0c
#define ATMEL_HSMC_NFC_IDR 0x10
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
index 844fc07d22cd..e0528397306a 100644
--- a/drivers/mtd/nand/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -311,6 +311,36 @@ static const u16 brcmnand_regs_v60[] = {
[BRCMNAND_FC_BASE] = 0x400,
};
+/* BRCMNAND v7.1 */
+static const u16 brcmnand_regs_v71[] = {
+ [BRCMNAND_CMD_START] = 0x04,
+ [BRCMNAND_CMD_EXT_ADDRESS] = 0x08,
+ [BRCMNAND_CMD_ADDRESS] = 0x0c,
+ [BRCMNAND_INTFC_STATUS] = 0x14,
+ [BRCMNAND_CS_SELECT] = 0x18,
+ [BRCMNAND_CS_XOR] = 0x1c,
+ [BRCMNAND_LL_OP] = 0x20,
+ [BRCMNAND_CS0_BASE] = 0x50,
+ [BRCMNAND_CS1_BASE] = 0,
+ [BRCMNAND_CORR_THRESHOLD] = 0xdc,
+ [BRCMNAND_CORR_THRESHOLD_EXT] = 0xe0,
+ [BRCMNAND_UNCORR_COUNT] = 0xfc,
+ [BRCMNAND_CORR_COUNT] = 0x100,
+ [BRCMNAND_CORR_EXT_ADDR] = 0x10c,
+ [BRCMNAND_CORR_ADDR] = 0x110,
+ [BRCMNAND_UNCORR_EXT_ADDR] = 0x114,
+ [BRCMNAND_UNCORR_ADDR] = 0x118,
+ [BRCMNAND_SEMAPHORE] = 0x150,
+ [BRCMNAND_ID] = 0x194,
+ [BRCMNAND_ID_EXT] = 0x198,
+ [BRCMNAND_LL_RDATA] = 0x19c,
+ [BRCMNAND_OOB_READ_BASE] = 0x200,
+ [BRCMNAND_OOB_READ_10_BASE] = 0,
+ [BRCMNAND_OOB_WRITE_BASE] = 0x280,
+ [BRCMNAND_OOB_WRITE_10_BASE] = 0,
+ [BRCMNAND_FC_BASE] = 0x400,
+};
+
enum brcmnand_cs_reg {
BRCMNAND_CS_CFG_EXT = 0,
BRCMNAND_CS_CFG,
@@ -406,7 +436,9 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
}
/* Register offsets */
- if (ctrl->nand_version >= 0x0600)
+ if (ctrl->nand_version >= 0x0701)
+ ctrl->reg_offsets = brcmnand_regs_v71;
+ else if (ctrl->nand_version >= 0x0600)
ctrl->reg_offsets = brcmnand_regs_v60;
else if (ctrl->nand_version >= 0x0500)
ctrl->reg_offsets = brcmnand_regs_v50;
@@ -796,7 +828,8 @@ static struct nand_ecclayout *brcmnand_create_layout(int ecc_level,
idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
break;
}
- goto out;
+
+ return layout;
}
/*
@@ -847,10 +880,7 @@ static struct nand_ecclayout *brcmnand_create_layout(int ecc_level,
idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
break;
}
-out:
- /* Sum available OOB */
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE; i++)
- layout->oobavail += layout->oobfree[i].length;
+
return layout;
}
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index aa1a616b9fb6..e553aff68987 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -537,7 +537,7 @@ static int cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
return 0;
}
-static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs)
{
return 0;
}
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index f170f3c31b34..547c1002941d 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -794,7 +794,7 @@ static int doc200x_dev_ready(struct mtd_info *mtd)
}
}
-static int doc200x_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+static int doc200x_block_bad(struct mtd_info *mtd, loff_t ofs)
{
/* This is our last resort if we couldn't find or create a BBT. Just
pretend all blocks are good. */
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index df4165b02c62..d86a60e1bbcb 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -225,7 +225,6 @@ struct docg4_priv {
static struct nand_ecclayout docg4_oobinfo = {
.eccbytes = 9,
.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
- .oobavail = 5,
.oobfree = { {.offset = 2, .length = 5} }
};
@@ -1121,7 +1120,7 @@ static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
return ret;
}
-static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs, int getchip)
+static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs)
{
/* only called when module_param ignore_badblocks is set */
return 0;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 235ddcb58f39..8122c699ccf2 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1,7 +1,7 @@
/*
* Freescale GPMI NAND Flash Driver
*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
* Copyright (C) 2008 Embedded Alley Solutions, Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -136,7 +136,7 @@ static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
*
* We may have available oob space in this case.
*/
-static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
+static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
{
struct bch_geometry *geo = &this->bch_geometry;
struct nand_chip *chip = &this->nand;
@@ -145,7 +145,7 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
unsigned int block_mark_bit_offset;
if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
- return false;
+ return -EINVAL;
switch (chip->ecc_step_ds) {
case SZ_512:
@@ -158,19 +158,19 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
dev_err(this->dev,
"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
chip->ecc_strength_ds, chip->ecc_step_ds);
- return false;
+ return -EINVAL;
}
geo->ecc_chunk_size = chip->ecc_step_ds;
geo->ecc_strength = round_up(chip->ecc_strength_ds, 2);
if (!gpmi_check_ecc(this))
- return false;
+ return -EINVAL;
/* Keep the C >= O */
if (geo->ecc_chunk_size < mtd->oobsize) {
dev_err(this->dev,
"unsupported nand chip. ecc size: %d, oob size : %d\n",
chip->ecc_step_ds, mtd->oobsize);
- return false;
+ return -EINVAL;
}
/* The default value, see comment in the legacy_set_geometry(). */
@@ -242,7 +242,7 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
+ ALIGN(geo->ecc_chunk_count, 4);
if (!this->swap_block_mark)
- return true;
+ return 0;
/* For bit swap. */
block_mark_bit_offset = mtd->writesize * 8 -
@@ -251,7 +251,7 @@ static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
geo->block_mark_byte_offset = block_mark_bit_offset / 8;
geo->block_mark_bit_offset = block_mark_bit_offset % 8;
- return true;
+ return 0;
}
static int legacy_set_geometry(struct gpmi_nand_data *this)
@@ -285,7 +285,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
geo->ecc_strength = get_ecc_strength(this);
if (!gpmi_check_ecc(this)) {
dev_err(this->dev,
- "required ecc strength of the NAND chip: %d is not supported by the GPMI controller (%d)\n",
+ "ecc strength: %d cannot be supported by the controller (%d)\n"
+ "try to use minimum ecc strength that NAND chip required\n",
geo->ecc_strength,
this->devdata->bch_max_ecc_strength);
return -EINVAL;
@@ -366,10 +367,11 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
- if (of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc")
- && set_geometry_by_ecc_info(this))
- return 0;
- return legacy_set_geometry(this);
+ if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
+ || legacy_set_geometry(this))
+ return set_geometry_by_ecc_info(this);
+
+ return 0;
}
struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
@@ -2033,9 +2035,54 @@ static int gpmi_nand_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int gpmi_pm_suspend(struct device *dev)
+{
+ struct gpmi_nand_data *this = dev_get_drvdata(dev);
+
+ release_dma_channels(this);
+ return 0;
+}
+
+static int gpmi_pm_resume(struct device *dev)
+{
+ struct gpmi_nand_data *this = dev_get_drvdata(dev);
+ int ret;
+
+ ret = acquire_dma_channels(this);
+ if (ret < 0)
+ return ret;
+
+ /* re-init the GPMI registers */
+ this->flags &= ~GPMI_TIMING_INIT_OK;
+ ret = gpmi_init(this);
+ if (ret) {
+ dev_err(this->dev, "Error setting GPMI : %d\n", ret);
+ return ret;
+ }
+
+ /* re-init the BCH registers */
+ ret = bch_set_geometry(this);
+ if (ret) {
+ dev_err(this->dev, "Error setting BCH : %d\n", ret);
+ return ret;
+ }
+
+ /* re-init others */
+ gpmi_extra_init(this);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops gpmi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume)
+};
+
static struct platform_driver gpmi_nand_driver = {
.driver = {
.name = "gpmi-nand",
+ .pm = &gpmi_pm_ops,
.of_match_table = gpmi_nand_id_table,
},
.probe = gpmi_nand_probe,
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
index f8d37f36a81c..96502b624cfb 100644
--- a/drivers/mtd/nand/hisi504_nand.c
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -632,7 +632,6 @@ static void hisi_nfc_host_init(struct hinfc_host *host)
}
static struct nand_ecclayout nand_ecc_2K_16bits = {
- .oobavail = 6,
.oobfree = { {2, 6} },
};
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index b19d2a9a5eb9..673ceb2a0b44 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -427,9 +427,6 @@ static int jz_nand_probe(struct platform_device *pdev)
chip->ecc.strength = 4;
chip->ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
- if (pdata)
- chip->ecc.layout = pdata->ecc_layout;
-
chip->chip_delay = 50;
chip->cmd_ctrl = jz_nand_cmd_ctrl;
chip->select_chip = jz_nand_select_chip;
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
index 9bc435d72a86..d8c3e7afcc0b 100644
--- a/drivers/mtd/nand/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -750,7 +750,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
}
nand_chip->ecc.mode = NAND_ECC_HW;
- nand_chip->ecc.size = mtd->writesize;
+ nand_chip->ecc.size = 512;
nand_chip->ecc.layout = &lpc32xx_nand_oob;
host->mlcsubpages = mtd->writesize / 512;
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 6b93e899d4e9..5d7843ffff6a 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -626,7 +626,7 @@ static void mpc5121_nfc_free(struct device *dev, struct mtd_info *mtd)
static int mpc5121_nfc_probe(struct platform_device *op)
{
- struct device_node *rootnode, *dn = op->dev.of_node;
+ struct device_node *dn = op->dev.of_node;
struct clk *clk;
struct device *dev = &op->dev;
struct mpc5121_nfc_prv *prv;
@@ -712,18 +712,15 @@ static int mpc5121_nfc_probe(struct platform_device *op)
chip->ecc.mode = NAND_ECC_SOFT;
/* Support external chip-select logic on ADS5121 board */
- rootnode = of_find_node_by_path("/");
- if (of_device_is_compatible(rootnode, "fsl,mpc5121ads")) {
+ if (of_machine_is_compatible("fsl,mpc5121ads")) {
retval = ads5121_chipselect_init(mtd);
if (retval) {
dev_err(dev, "Chipselect init error!\n");
- of_node_put(rootnode);
return retval;
}
chip->select_chip = ads5121_select_chip;
}
- of_node_put(rootnode);
/* Enable NFC clock */
clk = devm_clk_get(dev, "ipg");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index f2c8ff398d6c..b6facac54fc0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -313,13 +313,12 @@ static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
* nand_block_bad - [DEFAULT] Read bad block marker from the chip
* @mtd: MTD device structure
* @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
*
* Check, if the block is bad.
*/
-static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs)
{
- int page, chipnr, res = 0, i = 0;
+ int page, res = 0, i = 0;
struct nand_chip *chip = mtd_to_nand(mtd);
u16 bad;
@@ -328,15 +327,6 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
- if (getchip) {
- chipnr = (int)(ofs >> chip->chip_shift);
-
- nand_get_device(mtd, FL_READING);
-
- /* Select the NAND device */
- chip->select_chip(mtd, chipnr);
- }
-
do {
if (chip->options & NAND_BUSWIDTH_16) {
chip->cmdfunc(mtd, NAND_CMD_READOOB,
@@ -361,11 +351,6 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
i++;
} while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
- if (getchip) {
- chip->select_chip(mtd, -1);
- nand_release_device(mtd);
- }
-
return res;
}
@@ -503,19 +488,17 @@ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
* nand_block_checkbad - [GENERIC] Check if a block is marked bad
* @mtd: MTD device structure
* @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
* @allowbbt: 1, if its allowed to access the bbt area
*
* Check, if the block is bad. Either by reading the bad block table or
* calling of the scan function.
*/
-static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
- int allowbbt)
+static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt)
{
struct nand_chip *chip = mtd_to_nand(mtd);
if (!chip->bbt)
- return chip->block_bad(mtd, ofs, getchip);
+ return chip->block_bad(mtd, ofs);
/* Return info from the table */
return nand_isbad_bbt(mtd, ofs, allowbbt);
@@ -566,8 +549,8 @@ void nand_wait_ready(struct mtd_info *mtd)
cond_resched();
} while (time_before(jiffies, timeo));
- pr_warn_ratelimited(
- "timeout while waiting for chip to become ready\n");
+ if (!chip->dev_ready(mtd))
+ pr_warn_ratelimited("timeout while waiting for chip to become ready\n");
out:
led_trigger_event(nand_led_trigger, LED_OFF);
}
@@ -1723,8 +1706,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
- uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
- mtd->oobavail : mtd->oobsize;
+ uint32_t max_oobsize = mtd_oobavail(mtd, ops);
uint8_t *bufpoi, *oob, *buf;
int use_bufpoi;
@@ -2075,10 +2057,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
stats = mtd->ecc_stats;
- if (ops->mode == MTD_OPS_AUTO_OOB)
- len = chip->ecc.layout->oobavail;
- else
- len = mtd->oobsize;
+ len = mtd_oobavail(mtd, ops);
if (unlikely(ops->ooboffs >= len)) {
pr_debug("%s: attempt to start read outside oob\n",
@@ -2575,8 +2554,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
uint32_t writelen = ops->len;
uint32_t oobwritelen = ops->ooblen;
- uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
- mtd->oobavail : mtd->oobsize;
+ uint32_t oobmaxlen = mtd_oobavail(mtd, ops);
uint8_t *oob = ops->oobbuf;
uint8_t *buf = ops->datbuf;
@@ -2766,10 +2744,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
pr_debug("%s: to = 0x%08x, len = %i\n",
__func__, (unsigned int)to, (int)ops->ooblen);
- if (ops->mode == MTD_OPS_AUTO_OOB)
- len = chip->ecc.layout->oobavail;
- else
- len = mtd->oobsize;
+ len = mtd_oobavail(mtd, ops);
/* Do not allow write past end of page */
if ((ops->ooboffs + ops->ooblen) > len) {
@@ -2957,7 +2932,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
while (len) {
/* Check if we have a bad block, we do not erase bad blocks! */
if (nand_block_checkbad(mtd, ((loff_t) page) <<
- chip->page_shift, 0, allowbbt)) {
+ chip->page_shift, allowbbt)) {
pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
__func__, page);
instr->state = MTD_ERASE_FAILED;
@@ -3044,7 +3019,20 @@ static void nand_sync(struct mtd_info *mtd)
*/
static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
- return nand_block_checkbad(mtd, offs, 1, 0);
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int chipnr = (int)(offs >> chip->chip_shift);
+ int ret;
+
+ /* Select the NAND device */
+ nand_get_device(mtd, FL_READING);
+ chip->select_chip(mtd, chipnr);
+
+ ret = nand_block_checkbad(mtd, offs, 0);
+
+ chip->select_chip(mtd, -1);
+ nand_release_device(mtd);
+
+ return ret;
}
/**
@@ -4287,10 +4275,8 @@ int nand_scan_tail(struct mtd_info *mtd)
}
/* See nand_bch_init() for details. */
- ecc->bytes = DIV_ROUND_UP(
- ecc->strength * fls(8 * ecc->size), 8);
- ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
- &ecc->layout);
+ ecc->bytes = 0;
+ ecc->priv = nand_bch_init(mtd);
if (!ecc->priv) {
pr_warn("BCH ECC initialization failed!\n");
BUG();
@@ -4325,11 +4311,11 @@ int nand_scan_tail(struct mtd_info *mtd)
* The number of bytes available for a client to place data into
* the out of band area.
*/
- ecc->layout->oobavail = 0;
- for (i = 0; ecc->layout->oobfree[i].length
- && i < ARRAY_SIZE(ecc->layout->oobfree); i++)
- ecc->layout->oobavail += ecc->layout->oobfree[i].length;
- mtd->oobavail = ecc->layout->oobavail;
+ mtd->oobavail = 0;
+ if (ecc->layout) {
+ for (i = 0; ecc->layout->oobfree[i].length; i++)
+ mtd->oobavail += ecc->layout->oobfree[i].length;
+ }
/* ECC sanity check: warn if it's too weak */
if (!nand_ecc_strength_good(mtd))
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 4b6a7085b442..2fbb523df066 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -1373,5 +1373,3 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
return ret;
}
-
-EXPORT_SYMBOL(nand_scan_bbt);
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index a87c1b628dfc..b585bae37929 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -107,9 +107,6 @@ EXPORT_SYMBOL(nand_bch_correct_data);
/**
* nand_bch_init - [NAND Interface] Initialize NAND BCH error correction
* @mtd: MTD block structure
- * @eccsize: ecc block size in bytes
- * @eccbytes: ecc length in bytes
- * @ecclayout: output default layout
*
* Returns:
* a pointer to a new NAND BCH control structure, or NULL upon failure
@@ -123,14 +120,21 @@ EXPORT_SYMBOL(nand_bch_correct_data);
* @eccsize = 512 (thus, m=13 is the smallest integer such that 2^m-1 > 512*8)
* @eccbytes = 7 (7 bytes are required to store m*t = 13*4 = 52 bits)
*/
-struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
- struct nand_ecclayout **ecclayout)
+struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
{
+ struct nand_chip *nand = mtd_to_nand(mtd);
unsigned int m, t, eccsteps, i;
- struct nand_ecclayout *layout;
+ struct nand_ecclayout *layout = nand->ecc.layout;
struct nand_bch_control *nbc = NULL;
unsigned char *erased_page;
+ unsigned int eccsize = nand->ecc.size;
+ unsigned int eccbytes = nand->ecc.bytes;
+ unsigned int eccstrength = nand->ecc.strength;
+
+ if (!eccbytes && eccstrength) {
+ eccbytes = DIV_ROUND_UP(eccstrength * fls(8 * eccsize), 8);
+ nand->ecc.bytes = eccbytes;
+ }
if (!eccsize || !eccbytes) {
printk(KERN_WARNING "ecc parameters not supplied\n");
@@ -158,7 +162,7 @@ nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
eccsteps = mtd->writesize/eccsize;
/* if no ecc placement scheme was provided, build one */
- if (!*ecclayout) {
+ if (!layout) {
/* handle large page devices only */
if (mtd->oobsize < 64) {
@@ -184,7 +188,7 @@ nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
layout->oobfree[0].offset = 2;
layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
- *ecclayout = layout;
+ nand->ecc.layout = layout;
}
/* sanity checks */
@@ -192,7 +196,7 @@ nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
goto fail;
}
- if ((*ecclayout)->eccbytes != (eccsteps*eccbytes)) {
+ if (layout->eccbytes != (eccsteps*eccbytes)) {
printk(KERN_WARNING "invalid ecc layout\n");
goto fail;
}
@@ -216,6 +220,9 @@ nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
for (i = 0; i < eccbytes; i++)
nbc->eccmask[i] ^= 0xff;
+ if (!eccstrength)
+ nand->ecc.strength = (eccbytes * 8) / fls(8 * eccsize);
+
return nbc;
fail:
nand_bch_free(nbc);
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a8804a3da076..ccc05f5b2695 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -50,8 +50,8 @@ struct nand_flash_dev nand_flash_ids[] = {
SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
- SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
- 4 },
+ SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
+ NAND_ECC_INFO(40, SZ_1K), 4 },
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 220ddfcf29f5..dbc5b571c2bb 100644
--- a/drivers/mtd/nand/nuc900_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -113,7 +113,7 @@ static int nuc900_check_rb(struct nuc900_nand *nand)
{
unsigned int val;
spin_lock(&nand->lock);
- val = __raw_readl(REG_SMISR);
+ val = __raw_readl(nand->reg + REG_SMISR);
val &= READYBUSY;
spin_unlock(&nand->lock);
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index c553f78ab83f..0749ca1a1456 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1807,13 +1807,19 @@ static int omap_nand_probe(struct platform_device *pdev)
goto return_error;
}
+ /*
+ * Bail out earlier to let NAND_ECC_SOFT code create its own
+ * ecclayout instead of using ours.
+ */
+ if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ goto scan_tail;
+ }
+
/* populate MTD interface based on ECC scheme */
ecclayout = &info->oobinfo;
+ nand_chip->ecc.layout = ecclayout;
switch (info->ecc_opt) {
- case OMAP_ECC_HAM1_CODE_SW:
- nand_chip->ecc.mode = NAND_ECC_SOFT;
- break;
-
case OMAP_ECC_HAM1_CODE_HW:
pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
nand_chip->ecc.mode = NAND_ECC_HW;
@@ -1861,10 +1867,7 @@ static int omap_nand_probe(struct platform_device *pdev)
ecclayout->oobfree->offset = 1 +
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
/* software bch library is used for locating errors */
- nand_chip->ecc.priv = nand_bch_init(mtd,
- nand_chip->ecc.size,
- nand_chip->ecc.bytes,
- &ecclayout);
+ nand_chip->ecc.priv = nand_bch_init(mtd);
if (!nand_chip->ecc.priv) {
dev_err(&info->pdev->dev, "unable to use BCH library\n");
err = -EINVAL;
@@ -1925,10 +1928,7 @@ static int omap_nand_probe(struct platform_device *pdev)
ecclayout->oobfree->offset = 1 +
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
/* software bch library is used for locating errors */
- nand_chip->ecc.priv = nand_bch_init(mtd,
- nand_chip->ecc.size,
- nand_chip->ecc.bytes,
- &ecclayout);
+ nand_chip->ecc.priv = nand_bch_init(mtd);
if (!nand_chip->ecc.priv) {
dev_err(&info->pdev->dev, "unable to use BCH library\n");
err = -EINVAL;
@@ -2002,9 +2002,6 @@ static int omap_nand_probe(struct platform_device *pdev)
goto return_error;
}
- if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW)
- goto scan_tail;
-
/* all OOB bytes from oobfree->offset till end off OOB are free */
ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset;
/* check if NAND device's OOB is enough to store ECC signatures */
@@ -2015,7 +2012,6 @@ static int omap_nand_probe(struct platform_device *pdev)
err = -EINVAL;
goto return_error;
}
- nand_chip->ecc.layout = ecclayout;
scan_tail:
/* second phase scan */
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index a0e26dea1424..e4e50da30444 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -73,7 +73,6 @@ static int plat_nand_probe(struct platform_device *pdev)
data->chip.bbt_options |= pdata->chip.bbt_options;
data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
- data->chip.ecc.layout = pdata->chip.ecclayout;
data->chip.ecc.mode = NAND_ECC_SOFT;
platform_set_drvdata(pdev, data);
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 86fc245dc71a..d6508856da99 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -131,11 +131,23 @@
#define READ_ID_BYTES 7
/* macros for registers read/write */
-#define nand_writel(info, off, val) \
- writel_relaxed((val), (info)->mmio_base + (off))
-
-#define nand_readl(info, off) \
- readl_relaxed((info)->mmio_base + (off))
+#define nand_writel(info, off, val) \
+ do { \
+ dev_vdbg(&info->pdev->dev, \
+ "%s():%d nand_writel(0x%x, 0x%04x)\n", \
+ __func__, __LINE__, (val), (off)); \
+ writel_relaxed((val), (info)->mmio_base + (off)); \
+ } while (0)
+
+#define nand_readl(info, off) \
+ ({ \
+ unsigned int _v; \
+ _v = readl_relaxed((info)->mmio_base + (off)); \
+ dev_vdbg(&info->pdev->dev, \
+ "%s():%d nand_readl(0x%04x) = 0x%x\n", \
+ __func__, __LINE__, (off), _v); \
+ _v; \
+ })
/* error code and state */
enum {
@@ -199,7 +211,6 @@ struct pxa3xx_nand_info {
struct dma_chan *dma_chan;
dma_cookie_t dma_cookie;
int drcmr_dat;
- int drcmr_cmd;
unsigned char *data_buff;
unsigned char *oob_buff;
@@ -222,15 +233,44 @@ struct pxa3xx_nand_info {
int use_spare; /* use spare ? */
int need_wait;
- unsigned int data_size; /* data to be read from FIFO */
- unsigned int chunk_size; /* split commands chunk size */
- unsigned int oob_size;
+ /* Amount of real data per full chunk */
+ unsigned int chunk_size;
+
+ /* Amount of spare data per full chunk */
unsigned int spare_size;
+
+ /* Number of full chunks (i.e chunk_size + spare_size) */
+ unsigned int nfullchunks;
+
+ /*
+ * Total number of chunks. If equal to nfullchunks, then there
+ * are only full chunks. Otherwise, there is one last chunk of
+ * size (last_chunk_size + last_spare_size)
+ */
+ unsigned int ntotalchunks;
+
+ /* Amount of real data in the last chunk */
+ unsigned int last_chunk_size;
+
+ /* Amount of spare data in the last chunk */
+ unsigned int last_spare_size;
+
unsigned int ecc_size;
unsigned int ecc_err_cnt;
unsigned int max_bitflips;
int retcode;
+ /*
+ * Variables only valid during command
+ * execution. step_chunk_size and step_spare_size is the
+ * amount of real data and spare data in the current
+ * chunk. cur_chunk is the current chunk being
+ * read/programmed.
+ */
+ unsigned int step_chunk_size;
+ unsigned int step_spare_size;
+ unsigned int cur_chunk;
+
/* cached register value */
uint32_t reg_ndcr;
uint32_t ndtr0cs0;
@@ -526,25 +566,6 @@ static int pxa3xx_nand_init(struct pxa3xx_nand_host *host)
return 0;
}
-/*
- * Set the data and OOB size, depending on the selected
- * spare and ECC configuration.
- * Only applicable to READ0, READOOB and PAGEPROG commands.
- */
-static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info,
- struct mtd_info *mtd)
-{
- int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
-
- info->data_size = mtd->writesize;
- if (!oob_enable)
- return;
-
- info->oob_size = info->spare_size;
- if (!info->use_ecc)
- info->oob_size += info->ecc_size;
-}
-
/**
* NOTE: it is a must to set ND_RUN firstly, then write
* command buffer, otherwise, it does not work.
@@ -660,28 +681,28 @@ static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
static void handle_data_pio(struct pxa3xx_nand_info *info)
{
- unsigned int do_bytes = min(info->data_size, info->chunk_size);
-
switch (info->state) {
case STATE_PIO_WRITING:
- writesl(info->mmio_base + NDDB,
- info->data_buff + info->data_buff_pos,
- DIV_ROUND_UP(do_bytes, 4));
+ if (info->step_chunk_size)
+ writesl(info->mmio_base + NDDB,
+ info->data_buff + info->data_buff_pos,
+ DIV_ROUND_UP(info->step_chunk_size, 4));
- if (info->oob_size > 0)
+ if (info->step_spare_size)
writesl(info->mmio_base + NDDB,
info->oob_buff + info->oob_buff_pos,
- DIV_ROUND_UP(info->oob_size, 4));
+ DIV_ROUND_UP(info->step_spare_size, 4));
break;
case STATE_PIO_READING:
- drain_fifo(info,
- info->data_buff + info->data_buff_pos,
- DIV_ROUND_UP(do_bytes, 4));
+ if (info->step_chunk_size)
+ drain_fifo(info,
+ info->data_buff + info->data_buff_pos,
+ DIV_ROUND_UP(info->step_chunk_size, 4));
- if (info->oob_size > 0)
+ if (info->step_spare_size)
drain_fifo(info,
info->oob_buff + info->oob_buff_pos,
- DIV_ROUND_UP(info->oob_size, 4));
+ DIV_ROUND_UP(info->step_spare_size, 4));
break;
default:
dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
@@ -690,9 +711,8 @@ static void handle_data_pio(struct pxa3xx_nand_info *info)
}
/* Update buffer pointers for multi-page read/write */
- info->data_buff_pos += do_bytes;
- info->oob_buff_pos += info->oob_size;
- info->data_size -= do_bytes;
+ info->data_buff_pos += info->step_chunk_size;
+ info->oob_buff_pos += info->step_spare_size;
}
static void pxa3xx_nand_data_dma_irq(void *data)
@@ -733,8 +753,9 @@ static void start_data_dma(struct pxa3xx_nand_info *info)
info->state);
BUG();
}
- info->sg.length = info->data_size +
- (info->oob_size ? info->spare_size + info->ecc_size : 0);
+ info->sg.length = info->chunk_size;
+ if (info->use_spare)
+ info->sg.length += info->spare_size + info->ecc_size;
dma_map_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir);
tx = dmaengine_prep_slave_sg(info->dma_chan, &info->sg, 1, direction,
@@ -895,9 +916,11 @@ static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
/* reset data and oob column point to handle data */
info->buf_start = 0;
info->buf_count = 0;
- info->oob_size = 0;
info->data_buff_pos = 0;
info->oob_buff_pos = 0;
+ info->step_chunk_size = 0;
+ info->step_spare_size = 0;
+ info->cur_chunk = 0;
info->use_ecc = 0;
info->use_spare = 1;
info->retcode = ERR_NONE;
@@ -909,8 +932,6 @@ static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
case NAND_CMD_READ0:
case NAND_CMD_PAGEPROG:
info->use_ecc = 1;
- case NAND_CMD_READOOB:
- pxa3xx_set_datasize(info, mtd);
break;
case NAND_CMD_PARAM:
info->use_spare = 0;
@@ -969,6 +990,14 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
if (command == NAND_CMD_READOOB)
info->buf_start += mtd->writesize;
+ if (info->cur_chunk < info->nfullchunks) {
+ info->step_chunk_size = info->chunk_size;
+ info->step_spare_size = info->spare_size;
+ } else {
+ info->step_chunk_size = info->last_chunk_size;
+ info->step_spare_size = info->last_spare_size;
+ }
+
/*
* Multiple page read needs an 'extended command type' field,
* which is either naked-read or last-read according to the
@@ -980,8 +1009,8 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
| NDCB0_LEN_OVRD
| NDCB0_EXT_CMD_TYPE(ext_cmd_type);
- info->ndcb3 = info->chunk_size +
- info->oob_size;
+ info->ndcb3 = info->step_chunk_size +
+ info->step_spare_size;
}
set_command_address(info, mtd->writesize, column, page_addr);
@@ -1001,8 +1030,6 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
| NDCB0_EXT_CMD_TYPE(ext_cmd_type)
| addr_cycle
| command;
- /* No data transfer in this case */
- info->data_size = 0;
exec_cmd = 1;
}
break;
@@ -1014,6 +1041,14 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
break;
}
+ if (info->cur_chunk < info->nfullchunks) {
+ info->step_chunk_size = info->chunk_size;
+ info->step_spare_size = info->spare_size;
+ } else {
+ info->step_chunk_size = info->last_chunk_size;
+ info->step_spare_size = info->last_spare_size;
+ }
+
/* Second command setting for large pages */
if (mtd->writesize > PAGE_CHUNK_SIZE) {
/*
@@ -1024,14 +1059,14 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
| NDCB0_LEN_OVRD
| NDCB0_EXT_CMD_TYPE(ext_cmd_type);
- info->ndcb3 = info->chunk_size +
- info->oob_size;
+ info->ndcb3 = info->step_chunk_size +
+ info->step_spare_size;
/*
* This is the command dispatch that completes a chunked
* page program operation.
*/
- if (info->data_size == 0) {
+ if (info->cur_chunk == info->ntotalchunks) {
info->ndcb0 = NDCB0_CMD_TYPE(0x1)
| NDCB0_EXT_CMD_TYPE(ext_cmd_type)
| command;
@@ -1058,7 +1093,7 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
| command;
info->ndcb1 = (column & 0xFF);
info->ndcb3 = INIT_BUFFER_SIZE;
- info->data_size = INIT_BUFFER_SIZE;
+ info->step_chunk_size = INIT_BUFFER_SIZE;
break;
case NAND_CMD_READID:
@@ -1068,7 +1103,7 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
| command;
info->ndcb1 = (column & 0xFF);
- info->data_size = 8;
+ info->step_chunk_size = 8;
break;
case NAND_CMD_STATUS:
info->buf_count = 1;
@@ -1076,7 +1111,7 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
| NDCB0_ADDR_CYC(1)
| command;
- info->data_size = 8;
+ info->step_chunk_size = 8;
break;
case NAND_CMD_ERASE1:
@@ -1217,6 +1252,7 @@ static void nand_cmdfunc_extended(struct mtd_info *mtd,
init_completion(&info->dev_ready);
do {
info->state = STATE_PREPARED;
+
exec_cmd = prepare_set_command(info, command, ext_cmd_type,
column, page_addr);
if (!exec_cmd) {
@@ -1236,22 +1272,30 @@ static void nand_cmdfunc_extended(struct mtd_info *mtd,
break;
}
+ /* Only a few commands need several steps */
+ if (command != NAND_CMD_PAGEPROG &&
+ command != NAND_CMD_READ0 &&
+ command != NAND_CMD_READOOB)
+ break;
+
+ info->cur_chunk++;
+
/* Check if the sequence is complete */
- if (info->data_size == 0 && command != NAND_CMD_PAGEPROG)
+ if (info->cur_chunk == info->ntotalchunks && command != NAND_CMD_PAGEPROG)
break;
/*
* After a splitted program command sequence has issued
* the command dispatch, the command sequence is complete.
*/
- if (info->data_size == 0 &&
+ if (info->cur_chunk == (info->ntotalchunks + 1) &&
command == NAND_CMD_PAGEPROG &&
ext_cmd_type == EXT_CMD_TYPE_DISPATCH)
break;
if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
/* Last read: issue a 'last naked read' */
- if (info->data_size == info->chunk_size)
+ if (info->cur_chunk == info->ntotalchunks - 1)
ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
else
ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
@@ -1261,7 +1305,7 @@ static void nand_cmdfunc_extended(struct mtd_info *mtd,
* the command dispatch must be issued to complete.
*/
} else if (command == NAND_CMD_PAGEPROG &&
- info->data_size == 0) {
+ info->cur_chunk == info->ntotalchunks) {
ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
}
} while (1);
@@ -1506,6 +1550,8 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
int strength, int ecc_stepsize, int page_size)
{
if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
+ info->nfullchunks = 1;
+ info->ntotalchunks = 1;
info->chunk_size = 2048;
info->spare_size = 40;
info->ecc_size = 24;
@@ -1514,6 +1560,8 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
ecc->strength = 1;
} else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
+ info->nfullchunks = 1;
+ info->ntotalchunks = 1;
info->chunk_size = 512;
info->spare_size = 8;
info->ecc_size = 8;
@@ -1527,6 +1575,8 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
*/
} else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) {
info->ecc_bch = 1;
+ info->nfullchunks = 1;
+ info->ntotalchunks = 1;
info->chunk_size = 2048;
info->spare_size = 32;
info->ecc_size = 32;
@@ -1537,6 +1587,8 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
} else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
info->ecc_bch = 1;
+ info->nfullchunks = 2;
+ info->ntotalchunks = 2;
info->chunk_size = 2048;
info->spare_size = 32;
info->ecc_size = 32;
@@ -1551,8 +1603,12 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
*/
} else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
info->ecc_bch = 1;
+ info->nfullchunks = 4;
+ info->ntotalchunks = 5;
info->chunk_size = 1024;
info->spare_size = 0;
+ info->last_chunk_size = 0;
+ info->last_spare_size = 64;
info->ecc_size = 32;
ecc->mode = NAND_ECC_HW;
ecc->size = info->chunk_size;
@@ -1738,7 +1794,7 @@ static int alloc_nand_resource(struct platform_device *pdev)
if (ret < 0)
return ret;
- if (use_dma) {
+ if (!np && use_dma) {
r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (r == NULL) {
dev_err(&pdev->dev,
@@ -1747,15 +1803,6 @@ static int alloc_nand_resource(struct platform_device *pdev)
goto fail_disable_clk;
}
info->drcmr_dat = r->start;
-
- r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (r == NULL) {
- dev_err(&pdev->dev,
- "no resource defined for cmd DMA\n");
- ret = -ENXIO;
- goto fail_disable_clk;
- }
- info->drcmr_cmd = r->start;
}
irq = platform_get_irq(pdev, 0);
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
new file mode 100644
index 000000000000..f550a57e6eea
--- /dev/null
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -0,0 +1,2223 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
+#include <linux/delay.h>
+
+/* NANDc reg offsets */
+#define NAND_FLASH_CMD 0x00
+#define NAND_ADDR0 0x04
+#define NAND_ADDR1 0x08
+#define NAND_FLASH_CHIP_SELECT 0x0c
+#define NAND_EXEC_CMD 0x10
+#define NAND_FLASH_STATUS 0x14
+#define NAND_BUFFER_STATUS 0x18
+#define NAND_DEV0_CFG0 0x20
+#define NAND_DEV0_CFG1 0x24
+#define NAND_DEV0_ECC_CFG 0x28
+#define NAND_DEV1_ECC_CFG 0x2c
+#define NAND_DEV1_CFG0 0x30
+#define NAND_DEV1_CFG1 0x34
+#define NAND_READ_ID 0x40
+#define NAND_READ_STATUS 0x44
+#define NAND_DEV_CMD0 0xa0
+#define NAND_DEV_CMD1 0xa4
+#define NAND_DEV_CMD2 0xa8
+#define NAND_DEV_CMD_VLD 0xac
+#define SFLASHC_BURST_CFG 0xe0
+#define NAND_ERASED_CW_DETECT_CFG 0xe8
+#define NAND_ERASED_CW_DETECT_STATUS 0xec
+#define NAND_EBI2_ECC_BUF_CFG 0xf0
+#define FLASH_BUF_ACC 0x100
+
+#define NAND_CTRL 0xf00
+#define NAND_VERSION 0xf08
+#define NAND_READ_LOCATION_0 0xf20
+#define NAND_READ_LOCATION_1 0xf24
+
+/* dummy register offsets, used by write_reg_dma */
+#define NAND_DEV_CMD1_RESTORE 0xdead
+#define NAND_DEV_CMD_VLD_RESTORE 0xbeef
+
+/* NAND_FLASH_CMD bits */
+#define PAGE_ACC BIT(4)
+#define LAST_PAGE BIT(5)
+
+/* NAND_FLASH_CHIP_SELECT bits */
+#define NAND_DEV_SEL 0
+#define DM_EN BIT(2)
+
+/* NAND_FLASH_STATUS bits */
+#define FS_OP_ERR BIT(4)
+#define FS_READY_BSY_N BIT(5)
+#define FS_MPU_ERR BIT(8)
+#define FS_DEVICE_STS_ERR BIT(16)
+#define FS_DEVICE_WP BIT(23)
+
+/* NAND_BUFFER_STATUS bits */
+#define BS_UNCORRECTABLE_BIT BIT(8)
+#define BS_CORRECTABLE_ERR_MSK 0x1f
+
+/* NAND_DEVn_CFG0 bits */
+#define DISABLE_STATUS_AFTER_WRITE 4
+#define CW_PER_PAGE 6
+#define UD_SIZE_BYTES 9
+#define ECC_PARITY_SIZE_BYTES_RS 19
+#define SPARE_SIZE_BYTES 23
+#define NUM_ADDR_CYCLES 27
+#define STATUS_BFR_READ 30
+#define SET_RD_MODE_AFTER_STATUS 31
+
+/* NAND_DEVn_CFG0 bits */
+#define DEV0_CFG1_ECC_DISABLE 0
+#define WIDE_FLASH 1
+#define NAND_RECOVERY_CYCLES 2
+#define CS_ACTIVE_BSY 5
+#define BAD_BLOCK_BYTE_NUM 6
+#define BAD_BLOCK_IN_SPARE_AREA 16
+#define WR_RD_BSY_GAP 17
+#define ENABLE_BCH_ECC 27
+
+/* NAND_DEV0_ECC_CFG bits */
+#define ECC_CFG_ECC_DISABLE 0
+#define ECC_SW_RESET 1
+#define ECC_MODE 4
+#define ECC_PARITY_SIZE_BYTES_BCH 8
+#define ECC_NUM_DATA_BYTES 16
+#define ECC_FORCE_CLK_OPEN 30
+
+/* NAND_DEV_CMD1 bits */
+#define READ_ADDR 0
+
+/* NAND_DEV_CMD_VLD bits */
+#define READ_START_VLD 0
+
+/* NAND_EBI2_ECC_BUF_CFG bits */
+#define NUM_STEPS 0
+
+/* NAND_ERASED_CW_DETECT_CFG bits */
+#define ERASED_CW_ECC_MASK 1
+#define AUTO_DETECT_RES 0
+#define MASK_ECC (1 << ERASED_CW_ECC_MASK)
+#define RESET_ERASED_DET (1 << AUTO_DETECT_RES)
+#define ACTIVE_ERASED_DET (0 << AUTO_DETECT_RES)
+#define CLR_ERASED_PAGE_DET (RESET_ERASED_DET | MASK_ECC)
+#define SET_ERASED_PAGE_DET (ACTIVE_ERASED_DET | MASK_ECC)
+
+/* NAND_ERASED_CW_DETECT_STATUS bits */
+#define PAGE_ALL_ERASED BIT(7)
+#define CODEWORD_ALL_ERASED BIT(6)
+#define PAGE_ERASED BIT(5)
+#define CODEWORD_ERASED BIT(4)
+#define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED)
+#define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED)
+
+/* Version Mask */
+#define NAND_VERSION_MAJOR_MASK 0xf0000000
+#define NAND_VERSION_MAJOR_SHIFT 28
+#define NAND_VERSION_MINOR_MASK 0x0fff0000
+#define NAND_VERSION_MINOR_SHIFT 16
+
+/* NAND OP_CMDs */
+#define PAGE_READ 0x2
+#define PAGE_READ_WITH_ECC 0x3
+#define PAGE_READ_WITH_ECC_SPARE 0x4
+#define PROGRAM_PAGE 0x6
+#define PAGE_PROGRAM_WITH_ECC 0x7
+#define PROGRAM_PAGE_SPARE 0x9
+#define BLOCK_ERASE 0xa
+#define FETCH_ID 0xb
+#define RESET_DEVICE 0xd
+
+/*
+ * the NAND controller performs reads/writes with ECC in 516 byte chunks.
+ * the driver calls the chunks 'step' or 'codeword' interchangeably
+ */
+#define NANDC_STEP_SIZE 512
+
+/*
+ * the largest page size we support is 8K, this will have 16 steps/codewords
+ * of 512 bytes each
+ */
+#define MAX_NUM_STEPS (SZ_8K / NANDC_STEP_SIZE)
+
+/* we read at most 3 registers per codeword scan */
+#define MAX_REG_RD (3 * MAX_NUM_STEPS)
+
+/* ECC modes supported by the controller */
+#define ECC_NONE BIT(0)
+#define ECC_RS_4BIT BIT(1)
+#define ECC_BCH_4BIT BIT(2)
+#define ECC_BCH_8BIT BIT(3)
+
+struct desc_info {
+ struct list_head node;
+
+ enum dma_data_direction dir;
+ struct scatterlist sgl;
+ struct dma_async_tx_descriptor *dma_desc;
+};
+
+/*
+ * holds the current register values that we want to write. acts as a contiguous
+ * chunk of memory which we use to write the controller registers through DMA.
+ */
+struct nandc_regs {
+ __le32 cmd;
+ __le32 addr0;
+ __le32 addr1;
+ __le32 chip_sel;
+ __le32 exec;
+
+ __le32 cfg0;
+ __le32 cfg1;
+ __le32 ecc_bch_cfg;
+
+ __le32 clrflashstatus;
+ __le32 clrreadstatus;
+
+ __le32 cmd1;
+ __le32 vld;
+
+ __le32 orig_cmd1;
+ __le32 orig_vld;
+
+ __le32 ecc_buf_cfg;
+};
+
+/*
+ * NAND controller data struct
+ *
+ * @controller: base controller structure
+ * @host_list: list containing all the chips attached to the
+ * controller
+ * @dev: parent device
+ * @base: MMIO base
+ * @base_dma: physical base address of controller registers
+ * @core_clk: controller clock
+ * @aon_clk: another controller clock
+ *
+ * @chan: dma channel
+ * @cmd_crci: ADM DMA CRCI for command flow control
+ * @data_crci: ADM DMA CRCI for data flow control
+ * @desc_list: DMA descriptor list (list of desc_infos)
+ *
+ * @data_buffer: our local DMA buffer for page read/writes,
+ * used when we can't use the buffer provided
+ * by upper layers directly
+ * @buf_size/count/start: markers for chip->read_buf/write_buf functions
+ * @reg_read_buf: local buffer for reading back registers via DMA
+ * @reg_read_pos: marker for data read in reg_read_buf
+ *
+ * @regs: a contiguous chunk of memory for DMA register
+ * writes. contains the register values to be
+ * written to controller
+ * @cmd1/vld: some fixed controller register values
+ * @ecc_modes: supported ECC modes by the current controller,
+ * initialized via DT match data
+ */
+struct qcom_nand_controller {
+ struct nand_hw_control controller;
+ struct list_head host_list;
+
+ struct device *dev;
+
+ void __iomem *base;
+ dma_addr_t base_dma;
+
+ struct clk *core_clk;
+ struct clk *aon_clk;
+
+ struct dma_chan *chan;
+ unsigned int cmd_crci;
+ unsigned int data_crci;
+ struct list_head desc_list;
+
+ u8 *data_buffer;
+ int buf_size;
+ int buf_count;
+ int buf_start;
+
+ __le32 *reg_read_buf;
+ int reg_read_pos;
+
+ struct nandc_regs *regs;
+
+ u32 cmd1, vld;
+ u32 ecc_modes;
+};
+
+/*
+ * NAND chip structure
+ *
+ * @chip: base NAND chip structure
+ * @node: list node to add itself to host_list in
+ * qcom_nand_controller
+ *
+ * @cs: chip select value for this chip
+ * @cw_size: the number of bytes in a single step/codeword
+ * of a page, consisting of all data, ecc, spare
+ * and reserved bytes
+ * @cw_data: the number of bytes within a codeword protected
+ * by ECC
+ * @use_ecc: request the controller to use ECC for the
+ * upcoming read/write
+ * @bch_enabled: flag to tell whether BCH ECC mode is used
+ * @ecc_bytes_hw: ECC bytes used by controller hardware for this
+ * chip
+ * @status: value to be returned if NAND_CMD_STATUS command
+ * is executed
+ * @last_command: keeps track of last command on this chip. used
+ * for reading correct status
+ *
+ * @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for
+ * ecc/non-ecc mode for the current nand flash
+ * device
+ */
+struct qcom_nand_host {
+ struct nand_chip chip;
+ struct list_head node;
+
+ int cs;
+ int cw_size;
+ int cw_data;
+ bool use_ecc;
+ bool bch_enabled;
+ int ecc_bytes_hw;
+ int spare_bytes;
+ int bbm_size;
+ u8 status;
+ int last_command;
+
+ u32 cfg0, cfg1;
+ u32 cfg0_raw, cfg1_raw;
+ u32 ecc_buf_cfg;
+ u32 ecc_bch_cfg;
+ u32 clrflashstatus;
+ u32 clrreadstatus;
+};
+
+static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
+{
+ return container_of(chip, struct qcom_nand_host, chip);
+}
+
+static inline struct qcom_nand_controller *
+get_qcom_nand_controller(struct nand_chip *chip)
+{
+ return container_of(chip->controller, struct qcom_nand_controller,
+ controller);
+}
+
+static inline u32 nandc_read(struct qcom_nand_controller *nandc, int offset)
+{
+ return ioread32(nandc->base + offset);
+}
+
+static inline void nandc_write(struct qcom_nand_controller *nandc, int offset,
+ u32 val)
+{
+ iowrite32(val, nandc->base + offset);
+}
+
+static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
+{
+ switch (offset) {
+ case NAND_FLASH_CMD:
+ return &regs->cmd;
+ case NAND_ADDR0:
+ return &regs->addr0;
+ case NAND_ADDR1:
+ return &regs->addr1;
+ case NAND_FLASH_CHIP_SELECT:
+ return &regs->chip_sel;
+ case NAND_EXEC_CMD:
+ return &regs->exec;
+ case NAND_FLASH_STATUS:
+ return &regs->clrflashstatus;
+ case NAND_DEV0_CFG0:
+ return &regs->cfg0;
+ case NAND_DEV0_CFG1:
+ return &regs->cfg1;
+ case NAND_DEV0_ECC_CFG:
+ return &regs->ecc_bch_cfg;
+ case NAND_READ_STATUS:
+ return &regs->clrreadstatus;
+ case NAND_DEV_CMD1:
+ return &regs->cmd1;
+ case NAND_DEV_CMD1_RESTORE:
+ return &regs->orig_cmd1;
+ case NAND_DEV_CMD_VLD:
+ return &regs->vld;
+ case NAND_DEV_CMD_VLD_RESTORE:
+ return &regs->orig_vld;
+ case NAND_EBI2_ECC_BUF_CFG:
+ return &regs->ecc_buf_cfg;
+ default:
+ return NULL;
+ }
+}
+
+static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset,
+ u32 val)
+{
+ struct nandc_regs *regs = nandc->regs;
+ __le32 *reg;
+
+ reg = offset_to_nandc_reg(regs, offset);
+
+ if (reg)
+ *reg = cpu_to_le32(val);
+}
+
+/* helper to configure address register values */
+static void set_address(struct qcom_nand_host *host, u16 column, int page)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+ if (chip->options & NAND_BUSWIDTH_16)
+ column >>= 1;
+
+ nandc_set_reg(nandc, NAND_ADDR0, page << 16 | column);
+ nandc_set_reg(nandc, NAND_ADDR1, page >> 16 & 0xff);
+}
+
+/*
+ * update_rw_regs: set up read/write register values, these will be
+ * written to the NAND controller registers via DMA
+ *
+ * @num_cw: number of steps for the read/write operation
+ * @read: read or write operation
+ */
+static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ u32 cmd, cfg0, cfg1, ecc_bch_cfg;
+
+ if (read) {
+ if (host->use_ecc)
+ cmd = PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE;
+ else
+ cmd = PAGE_READ | PAGE_ACC | LAST_PAGE;
+ } else {
+ cmd = PROGRAM_PAGE | PAGE_ACC | LAST_PAGE;
+ }
+
+ if (host->use_ecc) {
+ cfg0 = (host->cfg0 & ~(7U << CW_PER_PAGE)) |
+ (num_cw - 1) << CW_PER_PAGE;
+
+ cfg1 = host->cfg1;
+ ecc_bch_cfg = host->ecc_bch_cfg;
+ } else {
+ cfg0 = (host->cfg0_raw & ~(7U << CW_PER_PAGE)) |
+ (num_cw - 1) << CW_PER_PAGE;
+
+ cfg1 = host->cfg1_raw;
+ ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE;
+ }
+
+ nandc_set_reg(nandc, NAND_FLASH_CMD, cmd);
+ nandc_set_reg(nandc, NAND_DEV0_CFG0, cfg0);
+ nandc_set_reg(nandc, NAND_DEV0_CFG1, cfg1);
+ nandc_set_reg(nandc, NAND_DEV0_ECC_CFG, ecc_bch_cfg);
+ nandc_set_reg(nandc, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg);
+ nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus);
+ nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
+ nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+}
+
+static int prep_dma_desc(struct qcom_nand_controller *nandc, bool read,
+ int reg_off, const void *vaddr, int size,
+ bool flow_control)
+{
+ struct desc_info *desc;
+ struct dma_async_tx_descriptor *dma_desc;
+ struct scatterlist *sgl;
+ struct dma_slave_config slave_conf;
+ enum dma_transfer_direction dir_eng;
+ int ret;
+
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (!desc)
+ return -ENOMEM;
+
+ sgl = &desc->sgl;
+
+ sg_init_one(sgl, vaddr, size);
+
+ if (read) {
+ dir_eng = DMA_DEV_TO_MEM;
+ desc->dir = DMA_FROM_DEVICE;
+ } else {
+ dir_eng = DMA_MEM_TO_DEV;
+ desc->dir = DMA_TO_DEVICE;
+ }
+
+ ret = dma_map_sg(nandc->dev, sgl, 1, desc->dir);
+ if (ret == 0) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ memset(&slave_conf, 0x00, sizeof(slave_conf));
+
+ slave_conf.device_fc = flow_control;
+ if (read) {
+ slave_conf.src_maxburst = 16;
+ slave_conf.src_addr = nandc->base_dma + reg_off;
+ slave_conf.slave_id = nandc->data_crci;
+ } else {
+ slave_conf.dst_maxburst = 16;
+ slave_conf.dst_addr = nandc->base_dma + reg_off;
+ slave_conf.slave_id = nandc->cmd_crci;
+ }
+
+ ret = dmaengine_slave_config(nandc->chan, &slave_conf);
+ if (ret) {
+ dev_err(nandc->dev, "failed to configure dma channel\n");
+ goto err;
+ }
+
+ dma_desc = dmaengine_prep_slave_sg(nandc->chan, sgl, 1, dir_eng, 0);
+ if (!dma_desc) {
+ dev_err(nandc->dev, "failed to prepare desc\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ desc->dma_desc = dma_desc;
+
+ list_add_tail(&desc->node, &nandc->desc_list);
+
+ return 0;
+err:
+ kfree(desc);
+
+ return ret;
+}
+
+/*
+ * read_reg_dma: prepares a descriptor to read a given number of
+ * contiguous registers to the reg_read_buf pointer
+ *
+ * @first: offset of the first register in the contiguous block
+ * @num_regs: number of registers to read
+ */
+static int read_reg_dma(struct qcom_nand_controller *nandc, int first,
+ int num_regs)
+{
+ bool flow_control = false;
+ void *vaddr;
+ int size;
+
+ if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
+ flow_control = true;
+
+ size = num_regs * sizeof(u32);
+ vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
+ nandc->reg_read_pos += num_regs;
+
+ return prep_dma_desc(nandc, true, first, vaddr, size, flow_control);
+}
+
+/*
+ * write_reg_dma: prepares a descriptor to write a given number of
+ * contiguous registers
+ *
+ * @first: offset of the first register in the contiguous block
+ * @num_regs: number of registers to write
+ */
+static int write_reg_dma(struct qcom_nand_controller *nandc, int first,
+ int num_regs)
+{
+ bool flow_control = false;
+ struct nandc_regs *regs = nandc->regs;
+ void *vaddr;
+ int size;
+
+ vaddr = offset_to_nandc_reg(regs, first);
+
+ if (first == NAND_FLASH_CMD)
+ flow_control = true;
+
+ if (first == NAND_DEV_CMD1_RESTORE)
+ first = NAND_DEV_CMD1;
+
+ if (first == NAND_DEV_CMD_VLD_RESTORE)
+ first = NAND_DEV_CMD_VLD;
+
+ size = num_regs * sizeof(u32);
+
+ return prep_dma_desc(nandc, false, first, vaddr, size, flow_control);
+}
+
+/*
+ * read_data_dma: prepares a DMA descriptor to transfer data from the
+ * controller's internal buffer to the buffer 'vaddr'
+ *
+ * @reg_off: offset within the controller's data buffer
+ * @vaddr: virtual address of the buffer we want to write to
+ * @size: DMA transaction size in bytes
+ */
+static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+ const u8 *vaddr, int size)
+{
+ return prep_dma_desc(nandc, true, reg_off, vaddr, size, false);
+}
+
+/*
+ * write_data_dma: prepares a DMA descriptor to transfer data from
+ * 'vaddr' to the controller's internal buffer
+ *
+ * @reg_off: offset within the controller's data buffer
+ * @vaddr: virtual address of the buffer we want to read from
+ * @size: DMA transaction size in bytes
+ */
+static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off,
+ const u8 *vaddr, int size)
+{
+ return prep_dma_desc(nandc, false, reg_off, vaddr, size, false);
+}
+
+/*
+ * helper to prepare dma descriptors to configure registers needed for reading a
+ * codeword/step in a page
+ */
+static void config_cw_read(struct qcom_nand_controller *nandc)
+{
+ write_reg_dma(nandc, NAND_FLASH_CMD, 3);
+ write_reg_dma(nandc, NAND_DEV0_CFG0, 3);
+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1);
+
+ write_reg_dma(nandc, NAND_EXEC_CMD, 1);
+
+ read_reg_dma(nandc, NAND_FLASH_STATUS, 2);
+ read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1);
+}
+
+/*
+ * helpers to prepare dma descriptors used to configure registers needed for
+ * writing a codeword/step in a page
+ */
+static void config_cw_write_pre(struct qcom_nand_controller *nandc)
+{
+ write_reg_dma(nandc, NAND_FLASH_CMD, 3);
+ write_reg_dma(nandc, NAND_DEV0_CFG0, 3);
+ write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1);
+}
+
+static void config_cw_write_post(struct qcom_nand_controller *nandc)
+{
+ write_reg_dma(nandc, NAND_EXEC_CMD, 1);
+
+ read_reg_dma(nandc, NAND_FLASH_STATUS, 1);
+
+ write_reg_dma(nandc, NAND_FLASH_STATUS, 1);
+ write_reg_dma(nandc, NAND_READ_STATUS, 1);
+}
+
+/*
+ * the following functions are used within chip->cmdfunc() to perform different
+ * NAND_CMD_* commands
+ */
+
+/* sets up descriptors for NAND_CMD_PARAM */
+static int nandc_param(struct qcom_nand_host *host)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+ /*
+ * NAND_CMD_PARAM is called before we know much about the FLASH chip
+ * in use. we configure the controller to perform a raw read of 512
+ * bytes to read onfi params
+ */
+ nandc_set_reg(nandc, NAND_FLASH_CMD, PAGE_READ | PAGE_ACC | LAST_PAGE);
+ nandc_set_reg(nandc, NAND_ADDR0, 0);
+ nandc_set_reg(nandc, NAND_ADDR1, 0);
+ nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE
+ | 512 << UD_SIZE_BYTES
+ | 5 << NUM_ADDR_CYCLES
+ | 0 << SPARE_SIZE_BYTES);
+ nandc_set_reg(nandc, NAND_DEV0_CFG1, 7 << NAND_RECOVERY_CYCLES
+ | 0 << CS_ACTIVE_BSY
+ | 17 << BAD_BLOCK_BYTE_NUM
+ | 1 << BAD_BLOCK_IN_SPARE_AREA
+ | 2 << WR_RD_BSY_GAP
+ | 0 << WIDE_FLASH
+ | 1 << DEV0_CFG1_ECC_DISABLE);
+ nandc_set_reg(nandc, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE);
+
+ /* configure CMD1 and VLD for ONFI param probing */
+ nandc_set_reg(nandc, NAND_DEV_CMD_VLD,
+ (nandc->vld & ~(1 << READ_START_VLD))
+ | 0 << READ_START_VLD);
+ nandc_set_reg(nandc, NAND_DEV_CMD1,
+ (nandc->cmd1 & ~(0xFF << READ_ADDR))
+ | NAND_CMD_PARAM << READ_ADDR);
+
+ nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+
+ nandc_set_reg(nandc, NAND_DEV_CMD1_RESTORE, nandc->cmd1);
+ nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
+
+ write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1);
+ write_reg_dma(nandc, NAND_DEV_CMD1, 1);
+
+ nandc->buf_count = 512;
+ memset(nandc->data_buffer, 0xff, nandc->buf_count);
+
+ config_cw_read(nandc);
+
+ read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
+ nandc->buf_count);
+
+ /* restore CMD1 and VLD regs */
+ write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1);
+ write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1);
+
+ return 0;
+}
+
+/* sets up descriptors for NAND_CMD_ERASE1 */
+static int erase_block(struct qcom_nand_host *host, int page_addr)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+ nandc_set_reg(nandc, NAND_FLASH_CMD,
+ BLOCK_ERASE | PAGE_ACC | LAST_PAGE);
+ nandc_set_reg(nandc, NAND_ADDR0, page_addr);
+ nandc_set_reg(nandc, NAND_ADDR1, 0);
+ nandc_set_reg(nandc, NAND_DEV0_CFG0,
+ host->cfg0_raw & ~(7 << CW_PER_PAGE));
+ nandc_set_reg(nandc, NAND_DEV0_CFG1, host->cfg1_raw);
+ nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+ nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus);
+ nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus);
+
+ write_reg_dma(nandc, NAND_FLASH_CMD, 3);
+ write_reg_dma(nandc, NAND_DEV0_CFG0, 2);
+ write_reg_dma(nandc, NAND_EXEC_CMD, 1);
+
+ read_reg_dma(nandc, NAND_FLASH_STATUS, 1);
+
+ write_reg_dma(nandc, NAND_FLASH_STATUS, 1);
+ write_reg_dma(nandc, NAND_READ_STATUS, 1);
+
+ return 0;
+}
+
+/* sets up descriptors for NAND_CMD_READID */
+static int read_id(struct qcom_nand_host *host, int column)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+ if (column == -1)
+ return 0;
+
+ nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID);
+ nandc_set_reg(nandc, NAND_ADDR0, column);
+ nandc_set_reg(nandc, NAND_ADDR1, 0);
+ nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
+ nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+
+ write_reg_dma(nandc, NAND_FLASH_CMD, 4);
+ write_reg_dma(nandc, NAND_EXEC_CMD, 1);
+
+ read_reg_dma(nandc, NAND_READ_ID, 1);
+
+ return 0;
+}
+
+/* sets up descriptors for NAND_CMD_RESET */
+static int reset(struct qcom_nand_host *host)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+ nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE);
+ nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
+
+ write_reg_dma(nandc, NAND_FLASH_CMD, 1);
+ write_reg_dma(nandc, NAND_EXEC_CMD, 1);
+
+ read_reg_dma(nandc, NAND_FLASH_STATUS, 1);
+
+ return 0;
+}
+
+/* helpers to submit/free our list of dma descriptors */
+static int submit_descs(struct qcom_nand_controller *nandc)
+{
+ struct desc_info *desc;
+ dma_cookie_t cookie = 0;
+
+ list_for_each_entry(desc, &nandc->desc_list, node)
+ cookie = dmaengine_submit(desc->dma_desc);
+
+ if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static void free_descs(struct qcom_nand_controller *nandc)
+{
+ struct desc_info *desc, *n;
+
+ list_for_each_entry_safe(desc, n, &nandc->desc_list, node) {
+ list_del(&desc->node);
+ dma_unmap_sg(nandc->dev, &desc->sgl, 1, desc->dir);
+ kfree(desc);
+ }
+}
+
+/* reset the register read buffer for next NAND operation */
+static void clear_read_regs(struct qcom_nand_controller *nandc)
+{
+ nandc->reg_read_pos = 0;
+ memset(nandc->reg_read_buf, 0,
+ MAX_REG_RD * sizeof(*nandc->reg_read_buf));
+}
+
+static void pre_command(struct qcom_nand_host *host, int command)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+ nandc->buf_count = 0;
+ nandc->buf_start = 0;
+ host->use_ecc = false;
+ host->last_command = command;
+
+ clear_read_regs(nandc);
+}
+
+/*
+ * this is called after NAND_CMD_PAGEPROG and NAND_CMD_ERASE1 to set our
+ * privately maintained status byte, this status byte can be read after
+ * NAND_CMD_STATUS is called
+ */
+static void parse_erase_write_errors(struct qcom_nand_host *host, int command)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int num_cw;
+ int i;
+
+ num_cw = command == NAND_CMD_PAGEPROG ? ecc->steps : 1;
+
+ for (i = 0; i < num_cw; i++) {
+ u32 flash_status = le32_to_cpu(nandc->reg_read_buf[i]);
+
+ if (flash_status & FS_MPU_ERR)
+ host->status &= ~NAND_STATUS_WP;
+
+ if (flash_status & FS_OP_ERR || (i == (num_cw - 1) &&
+ (flash_status &
+ FS_DEVICE_STS_ERR)))
+ host->status |= NAND_STATUS_FAIL;
+ }
+}
+
+static void post_command(struct qcom_nand_host *host, int command)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+ switch (command) {
+ case NAND_CMD_READID:
+ memcpy(nandc->data_buffer, nandc->reg_read_buf,
+ nandc->buf_count);
+ break;
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ parse_erase_write_errors(host, command);
+ break;
+ default:
+ break;
+ }
+}
+
+/*
+ * Implements chip->cmdfunc. It's only used for a limited set of commands.
+ * The rest of the commands wouldn't be called by upper layers. For example,
+ * NAND_CMD_READOOB would never be called because we have our own versions
+ * of read_oob ops for nand_ecc_ctrl.
+ */
+static void qcom_nandc_command(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ bool wait = false;
+ int ret = 0;
+
+ pre_command(host, command);
+
+ switch (command) {
+ case NAND_CMD_RESET:
+ ret = reset(host);
+ wait = true;
+ break;
+
+ case NAND_CMD_READID:
+ nandc->buf_count = 4;
+ ret = read_id(host, column);
+ wait = true;
+ break;
+
+ case NAND_CMD_PARAM:
+ ret = nandc_param(host);
+ wait = true;
+ break;
+
+ case NAND_CMD_ERASE1:
+ ret = erase_block(host, page_addr);
+ wait = true;
+ break;
+
+ case NAND_CMD_READ0:
+ /* we read the entire page for now */
+ WARN_ON(column != 0);
+
+ host->use_ecc = true;
+ set_address(host, 0, page_addr);
+ update_rw_regs(host, ecc->steps, true);
+ break;
+
+ case NAND_CMD_SEQIN:
+ WARN_ON(column != 0);
+ set_address(host, 0, page_addr);
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_NONE:
+ default:
+ break;
+ }
+
+ if (ret) {
+ dev_err(nandc->dev, "failure executing command %d\n",
+ command);
+ free_descs(nandc);
+ return;
+ }
+
+ if (wait) {
+ ret = submit_descs(nandc);
+ if (ret)
+ dev_err(nandc->dev,
+ "failure submitting descs for command %d\n",
+ command);
+ }
+
+ free_descs(nandc);
+
+ post_command(host, command);
+}
+
+/*
+ * when using BCH ECC, the HW flags an error in NAND_FLASH_STATUS if it read
+ * an erased CW, and reports an erased CW in NAND_ERASED_CW_DETECT_STATUS.
+ *
+ * when using RS ECC, the HW reports the same erros when reading an erased CW,
+ * but it notifies that it is an erased CW by placing special characters at
+ * certain offsets in the buffer.
+ *
+ * verify if the page is erased or not, and fix up the page for RS ECC by
+ * replacing the special characters with 0xff.
+ */
+static bool erased_chunk_check_and_fixup(u8 *data_buf, int data_len)
+{
+ u8 empty1, empty2;
+
+ /*
+ * an erased page flags an error in NAND_FLASH_STATUS, check if the page
+ * is erased by looking for 0x54s at offsets 3 and 175 from the
+ * beginning of each codeword
+ */
+
+ empty1 = data_buf[3];
+ empty2 = data_buf[175];
+
+ /*
+ * if the erased codework markers, if they exist override them with
+ * 0xffs
+ */
+ if ((empty1 == 0x54 && empty2 == 0xff) ||
+ (empty1 == 0xff && empty2 == 0x54)) {
+ data_buf[3] = 0xff;
+ data_buf[175] = 0xff;
+ }
+
+ /*
+ * check if the entire chunk contains 0xffs or not. if it doesn't, then
+ * restore the original values at the special offsets
+ */
+ if (memchr_inv(data_buf, 0xff, data_len)) {
+ data_buf[3] = empty1;
+ data_buf[175] = empty2;
+
+ return false;
+ }
+
+ return true;
+}
+
+struct read_stats {
+ __le32 flash;
+ __le32 buffer;
+ __le32 erased_cw;
+};
+
+/*
+ * reads back status registers set by the controller to notify page read
+ * errors. this is equivalent to what 'ecc->correct()' would do.
+ */
+static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
+ u8 *oob_buf)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ unsigned int max_bitflips = 0;
+ struct read_stats *buf;
+ int i;
+
+ buf = (struct read_stats *)nandc->reg_read_buf;
+
+ for (i = 0; i < ecc->steps; i++, buf++) {
+ u32 flash, buffer, erased_cw;
+ int data_len, oob_len;
+
+ if (i == (ecc->steps - 1)) {
+ data_len = ecc->size - ((ecc->steps - 1) << 2);
+ oob_len = ecc->steps << 2;
+ } else {
+ data_len = host->cw_data;
+ oob_len = 0;
+ }
+
+ flash = le32_to_cpu(buf->flash);
+ buffer = le32_to_cpu(buf->buffer);
+ erased_cw = le32_to_cpu(buf->erased_cw);
+
+ if (flash & (FS_OP_ERR | FS_MPU_ERR)) {
+ bool erased;
+
+ /* ignore erased codeword errors */
+ if (host->bch_enabled) {
+ erased = (erased_cw & ERASED_CW) == ERASED_CW ?
+ true : false;
+ } else {
+ erased = erased_chunk_check_and_fixup(data_buf,
+ data_len);
+ }
+
+ if (erased) {
+ data_buf += data_len;
+ if (oob_buf)
+ oob_buf += oob_len + ecc->bytes;
+ continue;
+ }
+
+ if (buffer & BS_UNCORRECTABLE_BIT) {
+ int ret, ecclen, extraooblen;
+ void *eccbuf;
+
+ eccbuf = oob_buf ? oob_buf + oob_len : NULL;
+ ecclen = oob_buf ? host->ecc_bytes_hw : 0;
+ extraooblen = oob_buf ? oob_len : 0;
+
+ /*
+ * make sure it isn't an erased page reported
+ * as not-erased by HW because of a few bitflips
+ */
+ ret = nand_check_erased_ecc_chunk(data_buf,
+ data_len, eccbuf, ecclen, oob_buf,
+ extraooblen, ecc->strength);
+ if (ret < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += ret;
+ max_bitflips =
+ max_t(unsigned int, max_bitflips, ret);
+ }
+ }
+ } else {
+ unsigned int stat;
+
+ stat = buffer & BS_CORRECTABLE_ERR_MSK;
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max(max_bitflips, stat);
+ }
+
+ data_buf += data_len;
+ if (oob_buf)
+ oob_buf += oob_len + ecc->bytes;
+ }
+
+ return max_bitflips;
+}
+
+/*
+ * helper to perform the actual page read operation, used by ecc->read_page(),
+ * ecc->read_oob()
+ */
+static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
+ u8 *oob_buf)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int i, ret;
+
+ /* queue cmd descs for each codeword */
+ for (i = 0; i < ecc->steps; i++) {
+ int data_size, oob_size;
+
+ if (i == (ecc->steps - 1)) {
+ data_size = ecc->size - ((ecc->steps - 1) << 2);
+ oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
+ host->spare_bytes;
+ } else {
+ data_size = host->cw_data;
+ oob_size = host->ecc_bytes_hw + host->spare_bytes;
+ }
+
+ config_cw_read(nandc);
+
+ if (data_buf)
+ read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
+ data_size);
+
+ /*
+ * when ecc is enabled, the controller doesn't read the real
+ * or dummy bad block markers in each chunk. To maintain a
+ * consistent layout across RAW and ECC reads, we just
+ * leave the real/dummy BBM offsets empty (i.e, filled with
+ * 0xffs)
+ */
+ if (oob_buf) {
+ int j;
+
+ for (j = 0; j < host->bbm_size; j++)
+ *oob_buf++ = 0xff;
+
+ read_data_dma(nandc, FLASH_BUF_ACC + data_size,
+ oob_buf, oob_size);
+ }
+
+ if (data_buf)
+ data_buf += data_size;
+ if (oob_buf)
+ oob_buf += oob_size;
+ }
+
+ ret = submit_descs(nandc);
+ if (ret)
+ dev_err(nandc->dev, "failure to read page/oob\n");
+
+ free_descs(nandc);
+
+ return ret;
+}
+
+/*
+ * a helper that copies the last step/codeword of a page (containing free oob)
+ * into our local buffer
+ */
+static int copy_last_cw(struct qcom_nand_host *host, int page)
+{
+ struct nand_chip *chip = &host->chip;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int size;
+ int ret;
+
+ clear_read_regs(nandc);
+
+ size = host->use_ecc ? host->cw_data : host->cw_size;
+
+ /* prepare a clean read buffer */
+ memset(nandc->data_buffer, 0xff, size);
+
+ set_address(host, host->cw_size * (ecc->steps - 1), page);
+ update_rw_regs(host, 1, true);
+
+ config_cw_read(nandc);
+
+ read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size);
+
+ ret = submit_descs(nandc);
+ if (ret)
+ dev_err(nandc->dev, "failed to copy last codeword\n");
+
+ free_descs(nandc);
+
+ return ret;
+}
+
+/* implements ecc->read_page() */
+static int qcom_nandc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ u8 *data_buf, *oob_buf = NULL;
+ int ret;
+
+ data_buf = buf;
+ oob_buf = oob_required ? chip->oob_poi : NULL;
+
+ ret = read_page_ecc(host, data_buf, oob_buf);
+ if (ret) {
+ dev_err(nandc->dev, "failure to read page\n");
+ return ret;
+ }
+
+ return parse_read_errors(host, data_buf, oob_buf);
+}
+
+/* implements ecc->read_page_raw() */
+static int qcom_nandc_read_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ u8 *data_buf, *oob_buf;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int i, ret;
+
+ data_buf = buf;
+ oob_buf = chip->oob_poi;
+
+ host->use_ecc = false;
+ update_rw_regs(host, ecc->steps, true);
+
+ for (i = 0; i < ecc->steps; i++) {
+ int data_size1, data_size2, oob_size1, oob_size2;
+ int reg_off = FLASH_BUF_ACC;
+
+ data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
+ oob_size1 = host->bbm_size;
+
+ if (i == (ecc->steps - 1)) {
+ data_size2 = ecc->size - data_size1 -
+ ((ecc->steps - 1) << 2);
+ oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
+ host->spare_bytes;
+ } else {
+ data_size2 = host->cw_data - data_size1;
+ oob_size2 = host->ecc_bytes_hw + host->spare_bytes;
+ }
+
+ config_cw_read(nandc);
+
+ read_data_dma(nandc, reg_off, data_buf, data_size1);
+ reg_off += data_size1;
+ data_buf += data_size1;
+
+ read_data_dma(nandc, reg_off, oob_buf, oob_size1);
+ reg_off += oob_size1;
+ oob_buf += oob_size1;
+
+ read_data_dma(nandc, reg_off, data_buf, data_size2);
+ reg_off += data_size2;
+ data_buf += data_size2;
+
+ read_data_dma(nandc, reg_off, oob_buf, oob_size2);
+ oob_buf += oob_size2;
+ }
+
+ ret = submit_descs(nandc);
+ if (ret)
+ dev_err(nandc->dev, "failure to read raw page\n");
+
+ free_descs(nandc);
+
+ return 0;
+}
+
+/* implements ecc->read_oob() */
+static int qcom_nandc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int ret;
+
+ clear_read_regs(nandc);
+
+ host->use_ecc = true;
+ set_address(host, 0, page);
+ update_rw_regs(host, ecc->steps, true);
+
+ ret = read_page_ecc(host, NULL, chip->oob_poi);
+ if (ret)
+ dev_err(nandc->dev, "failure to read oob\n");
+
+ return ret;
+}
+
+/* implements ecc->write_page() */
+static int qcom_nandc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
+{
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ u8 *data_buf, *oob_buf;
+ int i, ret;
+
+ clear_read_regs(nandc);
+
+ data_buf = (u8 *)buf;
+ oob_buf = chip->oob_poi;
+
+ host->use_ecc = true;
+ update_rw_regs(host, ecc->steps, false);
+
+ for (i = 0; i < ecc->steps; i++) {
+ int data_size, oob_size;
+
+ if (i == (ecc->steps - 1)) {
+ data_size = ecc->size - ((ecc->steps - 1) << 2);
+ oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
+ host->spare_bytes;
+ } else {
+ data_size = host->cw_data;
+ oob_size = ecc->bytes;
+ }
+
+ config_cw_write_pre(nandc);
+
+ write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size);
+
+ /*
+ * when ECC is enabled, we don't really need to write anything
+ * to oob for the first n - 1 codewords since these oob regions
+ * just contain ECC bytes that's written by the controller
+ * itself. For the last codeword, we skip the bbm positions and
+ * write to the free oob area.
+ */
+ if (i == (ecc->steps - 1)) {
+ oob_buf += host->bbm_size;
+
+ write_data_dma(nandc, FLASH_BUF_ACC + data_size,
+ oob_buf, oob_size);
+ }
+
+ config_cw_write_post(nandc);
+
+ data_buf += data_size;
+ oob_buf += oob_size;
+ }
+
+ ret = submit_descs(nandc);
+ if (ret)
+ dev_err(nandc->dev, "failure to write page\n");
+
+ free_descs(nandc);
+
+ return ret;
+}
+
+/* implements ecc->write_page_raw() */
+static int qcom_nandc_write_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf,
+ int oob_required, int page)
+{
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ u8 *data_buf, *oob_buf;
+ int i, ret;
+
+ clear_read_regs(nandc);
+
+ data_buf = (u8 *)buf;
+ oob_buf = chip->oob_poi;
+
+ host->use_ecc = false;
+ update_rw_regs(host, ecc->steps, false);
+
+ for (i = 0; i < ecc->steps; i++) {
+ int data_size1, data_size2, oob_size1, oob_size2;
+ int reg_off = FLASH_BUF_ACC;
+
+ data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
+ oob_size1 = host->bbm_size;
+
+ if (i == (ecc->steps - 1)) {
+ data_size2 = ecc->size - data_size1 -
+ ((ecc->steps - 1) << 2);
+ oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
+ host->spare_bytes;
+ } else {
+ data_size2 = host->cw_data - data_size1;
+ oob_size2 = host->ecc_bytes_hw + host->spare_bytes;
+ }
+
+ config_cw_write_pre(nandc);
+
+ write_data_dma(nandc, reg_off, data_buf, data_size1);
+ reg_off += data_size1;
+ data_buf += data_size1;
+
+ write_data_dma(nandc, reg_off, oob_buf, oob_size1);
+ reg_off += oob_size1;
+ oob_buf += oob_size1;
+
+ write_data_dma(nandc, reg_off, data_buf, data_size2);
+ reg_off += data_size2;
+ data_buf += data_size2;
+
+ write_data_dma(nandc, reg_off, oob_buf, oob_size2);
+ oob_buf += oob_size2;
+
+ config_cw_write_post(nandc);
+ }
+
+ ret = submit_descs(nandc);
+ if (ret)
+ dev_err(nandc->dev, "failure to write raw page\n");
+
+ free_descs(nandc);
+
+ return ret;
+}
+
+/*
+ * implements ecc->write_oob()
+ *
+ * the NAND controller cannot write only data or only oob within a codeword,
+ * since ecc is calculated for the combined codeword. we first copy the
+ * entire contents for the last codeword(data + oob), replace the old oob
+ * with the new one in chip->oob_poi, and then write the entire codeword.
+ * this read-copy-write operation results in a slight performance loss.
+ */
+static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ u8 *oob = chip->oob_poi;
+ int free_boff;
+ int data_size, oob_size;
+ int ret, status = 0;
+
+ host->use_ecc = true;
+
+ ret = copy_last_cw(host, page);
+ if (ret)
+ return ret;
+
+ clear_read_regs(nandc);
+
+ /* calculate the data and oob size for the last codeword/step */
+ data_size = ecc->size - ((ecc->steps - 1) << 2);
+ oob_size = ecc->steps << 2;
+
+ free_boff = ecc->layout->oobfree[0].offset;
+
+ /* override new oob content to last codeword */
+ memcpy(nandc->data_buffer + data_size, oob + free_boff, oob_size);
+
+ set_address(host, host->cw_size * (ecc->steps - 1), page);
+ update_rw_regs(host, 1, false);
+
+ config_cw_write_pre(nandc);
+ write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
+ data_size + oob_size);
+ config_cw_write_post(nandc);
+
+ ret = submit_descs(nandc);
+
+ free_descs(nandc);
+
+ if (ret) {
+ dev_err(nandc->dev, "failure to write oob\n");
+ return -EIO;
+ }
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int page, ret, bbpos, bad = 0;
+ u32 flash_status;
+
+ page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+
+ /*
+ * configure registers for a raw sub page read, the address is set to
+ * the beginning of the last codeword, we don't care about reading ecc
+ * portion of oob. we just want the first few bytes from this codeword
+ * that contains the BBM
+ */
+ host->use_ecc = false;
+
+ ret = copy_last_cw(host, page);
+ if (ret)
+ goto err;
+
+ flash_status = le32_to_cpu(nandc->reg_read_buf[0]);
+
+ if (flash_status & (FS_OP_ERR | FS_MPU_ERR)) {
+ dev_warn(nandc->dev, "error when trying to read BBM\n");
+ goto err;
+ }
+
+ bbpos = mtd->writesize - host->cw_size * (ecc->steps - 1);
+
+ bad = nandc->data_buffer[bbpos] != 0xff;
+
+ if (chip->options & NAND_BUSWIDTH_16)
+ bad = bad || (nandc->data_buffer[bbpos + 1] != 0xff);
+err:
+ return bad;
+}
+
+static int qcom_nandc_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int page, ret, status = 0;
+
+ clear_read_regs(nandc);
+
+ /*
+ * to mark the BBM as bad, we flash the entire last codeword with 0s.
+ * we don't care about the rest of the content in the codeword since
+ * we aren't going to use this block again
+ */
+ memset(nandc->data_buffer, 0x00, host->cw_size);
+
+ page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+
+ /* prepare write */
+ host->use_ecc = false;
+ set_address(host, host->cw_size * (ecc->steps - 1), page);
+ update_rw_regs(host, 1, false);
+
+ config_cw_write_pre(nandc);
+ write_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, host->cw_size);
+ config_cw_write_post(nandc);
+
+ ret = submit_descs(nandc);
+
+ free_descs(nandc);
+
+ if (ret) {
+ dev_err(nandc->dev, "failure to update BBM\n");
+ return -EIO;
+ }
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/*
+ * the three functions below implement chip->read_byte(), chip->read_buf()
+ * and chip->write_buf() respectively. these aren't used for
+ * reading/writing page data, they are used for smaller data like reading
+ * id, status etc
+ */
+static uint8_t qcom_nandc_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_host *host = to_qcom_nand_host(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ u8 *buf = nandc->data_buffer;
+ u8 ret = 0x0;
+
+ if (host->last_command == NAND_CMD_STATUS) {
+ ret = host->status;
+
+ host->status = NAND_STATUS_READY | NAND_STATUS_WP;
+
+ return ret;
+ }
+
+ if (nandc->buf_start < nandc->buf_count)
+ ret = buf[nandc->buf_start++];
+
+ return ret;
+}
+
+static void qcom_nandc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ int real_len = min_t(size_t, len, nandc->buf_count - nandc->buf_start);
+
+ memcpy(buf, nandc->data_buffer + nandc->buf_start, real_len);
+ nandc->buf_start += real_len;
+}
+
+static void qcom_nandc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ int real_len = min_t(size_t, len, nandc->buf_count - nandc->buf_start);
+
+ memcpy(nandc->data_buffer + nandc->buf_start, buf, real_len);
+
+ nandc->buf_start += real_len;
+}
+
+/* we support only one external chip for now */
+static void qcom_nandc_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+ if (chipnr <= 0)
+ return;
+
+ dev_warn(nandc->dev, "invalid chip select\n");
+}
+
+/*
+ * NAND controller page layout info
+ *
+ * Layout with ECC enabled:
+ *
+ * |----------------------| |---------------------------------|
+ * | xx.......yy| | *********xx.......yy|
+ * | DATA xx..ECC..yy| | DATA **SPARE**xx..ECC..yy|
+ * | (516) xx.......yy| | (516-n*4) **(n*4)**xx.......yy|
+ * | xx.......yy| | *********xx.......yy|
+ * |----------------------| |---------------------------------|
+ * codeword 1,2..n-1 codeword n
+ * <---(528/532 Bytes)--> <-------(528/532 Bytes)--------->
+ *
+ * n = Number of codewords in the page
+ * . = ECC bytes
+ * * = Spare/free bytes
+ * x = Unused byte(s)
+ * y = Reserved byte(s)
+ *
+ * 2K page: n = 4, spare = 16 bytes
+ * 4K page: n = 8, spare = 32 bytes
+ * 8K page: n = 16, spare = 64 bytes
+ *
+ * the qcom nand controller operates at a sub page/codeword level. each
+ * codeword is 528 and 532 bytes for 4 bit and 8 bit ECC modes respectively.
+ * the number of ECC bytes vary based on the ECC strength and the bus width.
+ *
+ * the first n - 1 codewords contains 516 bytes of user data, the remaining
+ * 12/16 bytes consist of ECC and reserved data. The nth codeword contains
+ * both user data and spare(oobavail) bytes that sum up to 516 bytes.
+ *
+ * When we access a page with ECC enabled, the reserved bytes(s) are not
+ * accessible at all. When reading, we fill up these unreadable positions
+ * with 0xffs. When writing, the controller skips writing the inaccessible
+ * bytes.
+ *
+ * Layout with ECC disabled:
+ *
+ * |------------------------------| |---------------------------------------|
+ * | yy xx.......| | bb *********xx.......|
+ * | DATA1 yy DATA2 xx..ECC..| | DATA1 bb DATA2 **SPARE**xx..ECC..|
+ * | (size1) yy (size2) xx.......| | (size1) bb (size2) **(n*4)**xx.......|
+ * | yy xx.......| | bb *********xx.......|
+ * |------------------------------| |---------------------------------------|
+ * codeword 1,2..n-1 codeword n
+ * <-------(528/532 Bytes)------> <-----------(528/532 Bytes)----------->
+ *
+ * n = Number of codewords in the page
+ * . = ECC bytes
+ * * = Spare/free bytes
+ * x = Unused byte(s)
+ * y = Dummy Bad Bock byte(s)
+ * b = Real Bad Block byte(s)
+ * size1/size2 = function of codeword size and 'n'
+ *
+ * when the ECC block is disabled, one reserved byte (or two for 16 bit bus
+ * width) is now accessible. For the first n - 1 codewords, these are dummy Bad
+ * Block Markers. In the last codeword, this position contains the real BBM
+ *
+ * In order to have a consistent layout between RAW and ECC modes, we assume
+ * the following OOB layout arrangement:
+ *
+ * |-----------| |--------------------|
+ * |yyxx.......| |bb*********xx.......|
+ * |yyxx..ECC..| |bb*FREEOOB*xx..ECC..|
+ * |yyxx.......| |bb*********xx.......|
+ * |yyxx.......| |bb*********xx.......|
+ * |-----------| |--------------------|
+ * first n - 1 nth OOB region
+ * OOB regions
+ *
+ * n = Number of codewords in the page
+ * . = ECC bytes
+ * * = FREE OOB bytes
+ * y = Dummy bad block byte(s) (inaccessible when ECC enabled)
+ * x = Unused byte(s)
+ * b = Real bad block byte(s) (inaccessible when ECC enabled)
+ *
+ * This layout is read as is when ECC is disabled. When ECC is enabled, the
+ * inaccessible Bad Block byte(s) are ignored when we write to a page/oob,
+ * and assumed as 0xffs when we read a page/oob. The ECC, unused and
+ * dummy/real bad block bytes are grouped as ecc bytes in nand_ecclayout (i.e,
+ * ecc->bytes is the sum of the three).
+ */
+
+static struct nand_ecclayout *
+qcom_nand_create_layout(struct qcom_nand_host *host)
+{
+ struct nand_chip *chip = &host->chip;
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct nand_ecclayout *layout;
+ int i, j, steps, pos = 0, shift = 0;
+
+ layout = devm_kzalloc(nandc->dev, sizeof(*layout), GFP_KERNEL);
+ if (!layout)
+ return NULL;
+
+ steps = mtd->writesize / ecc->size;
+ layout->eccbytes = steps * ecc->bytes;
+
+ layout->oobfree[0].offset = (steps - 1) * ecc->bytes + host->bbm_size;
+ layout->oobfree[0].length = steps << 2;
+
+ /*
+ * the oob bytes in the first n - 1 codewords are all grouped together
+ * in the format:
+ * DUMMY_BBM + UNUSED + ECC
+ */
+ for (i = 0; i < steps - 1; i++) {
+ for (j = 0; j < ecc->bytes; j++)
+ layout->eccpos[pos++] = i * ecc->bytes + j;
+ }
+
+ /*
+ * the oob bytes in the last codeword are grouped in the format:
+ * BBM + FREE OOB + UNUSED + ECC
+ */
+
+ /* fill up the bbm positions */
+ for (j = 0; j < host->bbm_size; j++)
+ layout->eccpos[pos++] = i * ecc->bytes + j;
+
+ /*
+ * fill up the ecc and reserved positions, their indices are offseted
+ * by the free oob region
+ */
+ shift = layout->oobfree[0].length + host->bbm_size;
+
+ for (j = 0; j < (host->ecc_bytes_hw + host->spare_bytes); j++)
+ layout->eccpos[pos++] = i * ecc->bytes + shift + j;
+
+ return layout;
+}
+
+static int qcom_nand_host_setup(struct qcom_nand_host *host)
+{
+ struct nand_chip *chip = &host->chip;
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+ int cwperpage, bad_block_byte;
+ bool wide_bus;
+ int ecc_mode = 1;
+
+ /*
+ * the controller requires each step consists of 512 bytes of data.
+ * bail out if DT has populated a wrong step size.
+ */
+ if (ecc->size != NANDC_STEP_SIZE) {
+ dev_err(nandc->dev, "invalid ecc size\n");
+ return -EINVAL;
+ }
+
+ wide_bus = chip->options & NAND_BUSWIDTH_16 ? true : false;
+
+ if (ecc->strength >= 8) {
+ /* 8 bit ECC defaults to BCH ECC on all platforms */
+ host->bch_enabled = true;
+ ecc_mode = 1;
+
+ if (wide_bus) {
+ host->ecc_bytes_hw = 14;
+ host->spare_bytes = 0;
+ host->bbm_size = 2;
+ } else {
+ host->ecc_bytes_hw = 13;
+ host->spare_bytes = 2;
+ host->bbm_size = 1;
+ }
+ } else {
+ /*
+ * if the controller supports BCH for 4 bit ECC, the controller
+ * uses lesser bytes for ECC. If RS is used, the ECC bytes is
+ * always 10 bytes
+ */
+ if (nandc->ecc_modes & ECC_BCH_4BIT) {
+ /* BCH */
+ host->bch_enabled = true;
+ ecc_mode = 0;
+
+ if (wide_bus) {
+ host->ecc_bytes_hw = 8;
+ host->spare_bytes = 2;
+ host->bbm_size = 2;
+ } else {
+ host->ecc_bytes_hw = 7;
+ host->spare_bytes = 4;
+ host->bbm_size = 1;
+ }
+ } else {
+ /* RS */
+ host->ecc_bytes_hw = 10;
+
+ if (wide_bus) {
+ host->spare_bytes = 0;
+ host->bbm_size = 2;
+ } else {
+ host->spare_bytes = 1;
+ host->bbm_size = 1;
+ }
+ }
+ }
+
+ /*
+ * we consider ecc->bytes as the sum of all the non-data content in a
+ * step. It gives us a clean representation of the oob area (even if
+ * all the bytes aren't used for ECC).It is always 16 bytes for 8 bit
+ * ECC and 12 bytes for 4 bit ECC
+ */
+ ecc->bytes = host->ecc_bytes_hw + host->spare_bytes + host->bbm_size;
+
+ ecc->read_page = qcom_nandc_read_page;
+ ecc->read_page_raw = qcom_nandc_read_page_raw;
+ ecc->read_oob = qcom_nandc_read_oob;
+ ecc->write_page = qcom_nandc_write_page;
+ ecc->write_page_raw = qcom_nandc_write_page_raw;
+ ecc->write_oob = qcom_nandc_write_oob;
+
+ ecc->mode = NAND_ECC_HW;
+
+ ecc->layout = qcom_nand_create_layout(host);
+ if (!ecc->layout)
+ return -ENOMEM;
+
+ cwperpage = mtd->writesize / ecc->size;
+
+ /*
+ * DATA_UD_BYTES varies based on whether the read/write command protects
+ * spare data with ECC too. We protect spare data by default, so we set
+ * it to main + spare data, which are 512 and 4 bytes respectively.
+ */
+ host->cw_data = 516;
+
+ /*
+ * total bytes in a step, either 528 bytes for 4 bit ECC, or 532 bytes
+ * for 8 bit ECC
+ */
+ host->cw_size = host->cw_data + ecc->bytes;
+
+ if (ecc->bytes * (mtd->writesize / ecc->size) > mtd->oobsize) {
+ dev_err(nandc->dev, "ecc data doesn't fit in OOB area\n");
+ return -EINVAL;
+ }
+
+ bad_block_byte = mtd->writesize - host->cw_size * (cwperpage - 1) + 1;
+
+ host->cfg0 = (cwperpage - 1) << CW_PER_PAGE
+ | host->cw_data << UD_SIZE_BYTES
+ | 0 << DISABLE_STATUS_AFTER_WRITE
+ | 5 << NUM_ADDR_CYCLES
+ | host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_RS
+ | 0 << STATUS_BFR_READ
+ | 1 << SET_RD_MODE_AFTER_STATUS
+ | host->spare_bytes << SPARE_SIZE_BYTES;
+
+ host->cfg1 = 7 << NAND_RECOVERY_CYCLES
+ | 0 << CS_ACTIVE_BSY
+ | bad_block_byte << BAD_BLOCK_BYTE_NUM
+ | 0 << BAD_BLOCK_IN_SPARE_AREA
+ | 2 << WR_RD_BSY_GAP
+ | wide_bus << WIDE_FLASH
+ | host->bch_enabled << ENABLE_BCH_ECC;
+
+ host->cfg0_raw = (cwperpage - 1) << CW_PER_PAGE
+ | host->cw_size << UD_SIZE_BYTES
+ | 5 << NUM_ADDR_CYCLES
+ | 0 << SPARE_SIZE_BYTES;
+
+ host->cfg1_raw = 7 << NAND_RECOVERY_CYCLES
+ | 0 << CS_ACTIVE_BSY
+ | 17 << BAD_BLOCK_BYTE_NUM
+ | 1 << BAD_BLOCK_IN_SPARE_AREA
+ | 2 << WR_RD_BSY_GAP
+ | wide_bus << WIDE_FLASH
+ | 1 << DEV0_CFG1_ECC_DISABLE;
+
+ host->ecc_bch_cfg = host->bch_enabled << ECC_CFG_ECC_DISABLE
+ | 0 << ECC_SW_RESET
+ | host->cw_data << ECC_NUM_DATA_BYTES
+ | 1 << ECC_FORCE_CLK_OPEN
+ | ecc_mode << ECC_MODE
+ | host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_BCH;
+
+ host->ecc_buf_cfg = 0x203 << NUM_STEPS;
+
+ host->clrflashstatus = FS_READY_BSY_N;
+ host->clrreadstatus = 0xc0;
+
+ dev_dbg(nandc->dev,
+ "cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n",
+ host->cfg0, host->cfg1, host->ecc_buf_cfg, host->ecc_bch_cfg,
+ host->cw_size, host->cw_data, ecc->strength, ecc->bytes,
+ cwperpage);
+
+ return 0;
+}
+
+static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
+{
+ int ret;
+
+ ret = dma_set_coherent_mask(nandc->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(nandc->dev, "failed to set DMA mask\n");
+ return ret;
+ }
+
+ /*
+ * we use the internal buffer for reading ONFI params, reading small
+ * data like ID and status, and preforming read-copy-write operations
+ * when writing to a codeword partially. 532 is the maximum possible
+ * size of a codeword for our nand controller
+ */
+ nandc->buf_size = 532;
+
+ nandc->data_buffer = devm_kzalloc(nandc->dev, nandc->buf_size,
+ GFP_KERNEL);
+ if (!nandc->data_buffer)
+ return -ENOMEM;
+
+ nandc->regs = devm_kzalloc(nandc->dev, sizeof(*nandc->regs),
+ GFP_KERNEL);
+ if (!nandc->regs)
+ return -ENOMEM;
+
+ nandc->reg_read_buf = devm_kzalloc(nandc->dev,
+ MAX_REG_RD * sizeof(*nandc->reg_read_buf),
+ GFP_KERNEL);
+ if (!nandc->reg_read_buf)
+ return -ENOMEM;
+
+ nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx");
+ if (!nandc->chan) {
+ dev_err(nandc->dev, "failed to request slave channel\n");
+ return -ENODEV;
+ }
+
+ INIT_LIST_HEAD(&nandc->desc_list);
+ INIT_LIST_HEAD(&nandc->host_list);
+
+ spin_lock_init(&nandc->controller.lock);
+ init_waitqueue_head(&nandc->controller.wq);
+
+ return 0;
+}
+
+static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
+{
+ dma_release_channel(nandc->chan);
+}
+
+/* one time setup of a few nand controller registers */
+static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
+{
+ /* kill onenand */
+ nandc_write(nandc, SFLASHC_BURST_CFG, 0);
+
+ /* enable ADM DMA */
+ nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
+
+ /* save the original values of these registers */
+ nandc->cmd1 = nandc_read(nandc, NAND_DEV_CMD1);
+ nandc->vld = nandc_read(nandc, NAND_DEV_CMD_VLD);
+
+ return 0;
+}
+
+static int qcom_nand_host_init(struct qcom_nand_controller *nandc,
+ struct qcom_nand_host *host,
+ struct device_node *dn)
+{
+ struct nand_chip *chip = &host->chip;
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct device *dev = nandc->dev;
+ int ret;
+
+ ret = of_property_read_u32(dn, "reg", &host->cs);
+ if (ret) {
+ dev_err(dev, "can't get chip-select\n");
+ return -ENXIO;
+ }
+
+ nand_set_flash_node(chip, dn);
+ mtd->name = devm_kasprintf(dev, GFP_KERNEL, "qcom_nand.%d", host->cs);
+ mtd->owner = THIS_MODULE;
+ mtd->dev.parent = dev;
+
+ chip->cmdfunc = qcom_nandc_command;
+ chip->select_chip = qcom_nandc_select_chip;
+ chip->read_byte = qcom_nandc_read_byte;
+ chip->read_buf = qcom_nandc_read_buf;
+ chip->write_buf = qcom_nandc_write_buf;
+
+ /*
+ * the bad block marker is readable only when we read the last codeword
+ * of a page with ECC disabled. currently, the nand_base and nand_bbt
+ * helpers don't allow us to read BB from a nand chip with ECC
+ * disabled (MTD_OPS_PLACE_OOB is set by default). use the block_bad
+ * and block_markbad helpers until we permanently switch to using
+ * MTD_OPS_RAW for all drivers (with the help of badblockbits)
+ */
+ chip->block_bad = qcom_nandc_block_bad;
+ chip->block_markbad = qcom_nandc_block_markbad;
+
+ chip->controller = &nandc->controller;
+ chip->options |= NAND_NO_SUBPAGE_WRITE | NAND_USE_BOUNCE_BUFFER |
+ NAND_SKIP_BBTSCAN;
+
+ /* set up initial status value */
+ host->status = NAND_STATUS_READY | NAND_STATUS_WP;
+
+ ret = nand_scan_ident(mtd, 1, NULL);
+ if (ret)
+ return ret;
+
+ ret = qcom_nand_host_setup(host);
+ if (ret)
+ return ret;
+
+ ret = nand_scan_tail(mtd);
+ if (ret)
+ return ret;
+
+ return mtd_device_register(mtd, NULL, 0);
+}
+
+/* parse custom DT properties here */
+static int qcom_nandc_parse_dt(struct platform_device *pdev)
+{
+ struct qcom_nand_controller *nandc = platform_get_drvdata(pdev);
+ struct device_node *np = nandc->dev->of_node;
+ int ret;
+
+ ret = of_property_read_u32(np, "qcom,cmd-crci", &nandc->cmd_crci);
+ if (ret) {
+ dev_err(nandc->dev, "command CRCI unspecified\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "qcom,data-crci", &nandc->data_crci);
+ if (ret) {
+ dev_err(nandc->dev, "data CRCI unspecified\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int qcom_nandc_probe(struct platform_device *pdev)
+{
+ struct qcom_nand_controller *nandc;
+ struct qcom_nand_host *host;
+ const void *dev_data;
+ struct device *dev = &pdev->dev;
+ struct device_node *dn = dev->of_node, *child;
+ struct resource *res;
+ int ret;
+
+ nandc = devm_kzalloc(&pdev->dev, sizeof(*nandc), GFP_KERNEL);
+ if (!nandc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, nandc);
+ nandc->dev = dev;
+
+ dev_data = of_device_get_match_data(dev);
+ if (!dev_data) {
+ dev_err(&pdev->dev, "failed to get device data\n");
+ return -ENODEV;
+ }
+
+ nandc->ecc_modes = (unsigned long)dev_data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ nandc->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(nandc->base))
+ return PTR_ERR(nandc->base);
+
+ nandc->base_dma = phys_to_dma(dev, (phys_addr_t)res->start);
+
+ nandc->core_clk = devm_clk_get(dev, "core");
+ if (IS_ERR(nandc->core_clk))
+ return PTR_ERR(nandc->core_clk);
+
+ nandc->aon_clk = devm_clk_get(dev, "aon");
+ if (IS_ERR(nandc->aon_clk))
+ return PTR_ERR(nandc->aon_clk);
+
+ ret = qcom_nandc_parse_dt(pdev);
+ if (ret)
+ return ret;
+
+ ret = qcom_nandc_alloc(nandc);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(nandc->core_clk);
+ if (ret)
+ goto err_core_clk;
+
+ ret = clk_prepare_enable(nandc->aon_clk);
+ if (ret)
+ goto err_aon_clk;
+
+ ret = qcom_nandc_setup(nandc);
+ if (ret)
+ goto err_setup;
+
+ for_each_available_child_of_node(dn, child) {
+ if (of_device_is_compatible(child, "qcom,nandcs")) {
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host) {
+ of_node_put(child);
+ ret = -ENOMEM;
+ goto err_cs_init;
+ }
+
+ ret = qcom_nand_host_init(nandc, host, child);
+ if (ret) {
+ devm_kfree(dev, host);
+ continue;
+ }
+
+ list_add_tail(&host->node, &nandc->host_list);
+ }
+ }
+
+ if (list_empty(&nandc->host_list)) {
+ ret = -ENODEV;
+ goto err_cs_init;
+ }
+
+ return 0;
+
+err_cs_init:
+ list_for_each_entry(host, &nandc->host_list, node)
+ nand_release(nand_to_mtd(&host->chip));
+err_setup:
+ clk_disable_unprepare(nandc->aon_clk);
+err_aon_clk:
+ clk_disable_unprepare(nandc->core_clk);
+err_core_clk:
+ qcom_nandc_unalloc(nandc);
+
+ return ret;
+}
+
+static int qcom_nandc_remove(struct platform_device *pdev)
+{
+ struct qcom_nand_controller *nandc = platform_get_drvdata(pdev);
+ struct qcom_nand_host *host;
+
+ list_for_each_entry(host, &nandc->host_list, node)
+ nand_release(nand_to_mtd(&host->chip));
+
+ qcom_nandc_unalloc(nandc);
+
+ clk_disable_unprepare(nandc->aon_clk);
+ clk_disable_unprepare(nandc->core_clk);
+
+ return 0;
+}
+
+#define EBI2_NANDC_ECC_MODES (ECC_RS_4BIT | ECC_BCH_8BIT)
+
+/*
+ * data will hold a struct pointer containing more differences once we support
+ * more controller variants
+ */
+static const struct of_device_id qcom_nandc_of_match[] = {
+ { .compatible = "qcom,ipq806x-nand",
+ .data = (void *)EBI2_NANDC_ECC_MODES,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qcom_nandc_of_match);
+
+static struct platform_driver qcom_nandc_driver = {
+ .driver = {
+ .name = "qcom-nandc",
+ .of_match_table = qcom_nandc_of_match,
+ },
+ .probe = qcom_nandc_probe,
+ .remove = qcom_nandc_remove,
+};
+module_platform_driver(qcom_nandc_driver);
+
+MODULE_AUTHOR("Archit Taneja <architt@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm NAND Controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 01ac74fa3b95..9c9397b54b2c 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -861,9 +861,6 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
chip->ecc.mode = NAND_ECC_SOFT;
#endif
- if (set->ecc_layout != NULL)
- chip->ecc.layout = set->ecc_layout;
-
if (set->disable_ecc)
chip->ecc.mode = NAND_ECC_NONE;
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 51e10a35fe08..1c03eee44f3d 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -60,6 +60,7 @@
#define NFC_REG_ECC_ERR_CNT(x) ((0x0040 + (x)) & ~0x3)
#define NFC_REG_USER_DATA(x) (0x0050 + ((x) * 4))
#define NFC_REG_SPARE_AREA 0x00A0
+#define NFC_REG_PAT_ID 0x00A4
#define NFC_RAM0_BASE 0x0400
#define NFC_RAM1_BASE 0x0800
@@ -538,6 +539,174 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
}
+/* These seed values have been extracted from Allwinner's BSP */
+static const u16 sunxi_nfc_randomizer_page_seeds[] = {
+ 0x2b75, 0x0bd0, 0x5ca3, 0x62d1, 0x1c93, 0x07e9, 0x2162, 0x3a72,
+ 0x0d67, 0x67f9, 0x1be7, 0x077d, 0x032f, 0x0dac, 0x2716, 0x2436,
+ 0x7922, 0x1510, 0x3860, 0x5287, 0x480f, 0x4252, 0x1789, 0x5a2d,
+ 0x2a49, 0x5e10, 0x437f, 0x4b4e, 0x2f45, 0x216e, 0x5cb7, 0x7130,
+ 0x2a3f, 0x60e4, 0x4dc9, 0x0ef0, 0x0f52, 0x1bb9, 0x6211, 0x7a56,
+ 0x226d, 0x4ea7, 0x6f36, 0x3692, 0x38bf, 0x0c62, 0x05eb, 0x4c55,
+ 0x60f4, 0x728c, 0x3b6f, 0x2037, 0x7f69, 0x0936, 0x651a, 0x4ceb,
+ 0x6218, 0x79f3, 0x383f, 0x18d9, 0x4f05, 0x5c82, 0x2912, 0x6f17,
+ 0x6856, 0x5938, 0x1007, 0x61ab, 0x3e7f, 0x57c2, 0x542f, 0x4f62,
+ 0x7454, 0x2eac, 0x7739, 0x42d4, 0x2f90, 0x435a, 0x2e52, 0x2064,
+ 0x637c, 0x66ad, 0x2c90, 0x0bad, 0x759c, 0x0029, 0x0986, 0x7126,
+ 0x1ca7, 0x1605, 0x386a, 0x27f5, 0x1380, 0x6d75, 0x24c3, 0x0f8e,
+ 0x2b7a, 0x1418, 0x1fd1, 0x7dc1, 0x2d8e, 0x43af, 0x2267, 0x7da3,
+ 0x4e3d, 0x1338, 0x50db, 0x454d, 0x764d, 0x40a3, 0x42e6, 0x262b,
+ 0x2d2e, 0x1aea, 0x2e17, 0x173d, 0x3a6e, 0x71bf, 0x25f9, 0x0a5d,
+ 0x7c57, 0x0fbe, 0x46ce, 0x4939, 0x6b17, 0x37bb, 0x3e91, 0x76db,
+};
+
+/*
+ * sunxi_nfc_randomizer_ecc512_seeds and sunxi_nfc_randomizer_ecc1024_seeds
+ * have been generated using
+ * sunxi_nfc_randomizer_step(seed, (step_size * 8) + 15), which is what
+ * the randomizer engine does internally before de/scrambling OOB data.
+ *
+ * Those tables are statically defined to avoid calculating randomizer state
+ * at runtime.
+ */
+static const u16 sunxi_nfc_randomizer_ecc512_seeds[] = {
+ 0x3346, 0x367f, 0x1f18, 0x769a, 0x4f64, 0x068c, 0x2ef1, 0x6b64,
+ 0x28a9, 0x15d7, 0x30f8, 0x3659, 0x53db, 0x7c5f, 0x71d4, 0x4409,
+ 0x26eb, 0x03cc, 0x655d, 0x47d4, 0x4daa, 0x0877, 0x712d, 0x3617,
+ 0x3264, 0x49aa, 0x7f9e, 0x588e, 0x4fbc, 0x7176, 0x7f91, 0x6c6d,
+ 0x4b95, 0x5fb7, 0x3844, 0x4037, 0x0184, 0x081b, 0x0ee8, 0x5b91,
+ 0x293d, 0x1f71, 0x0e6f, 0x402b, 0x5122, 0x1e52, 0x22be, 0x3d2d,
+ 0x75bc, 0x7c60, 0x6291, 0x1a2f, 0x61d4, 0x74aa, 0x4140, 0x29ab,
+ 0x472d, 0x2852, 0x017e, 0x15e8, 0x5ec2, 0x17cf, 0x7d0f, 0x06b8,
+ 0x117a, 0x6b94, 0x789b, 0x3126, 0x6ac5, 0x5be7, 0x150f, 0x51f8,
+ 0x7889, 0x0aa5, 0x663d, 0x77e8, 0x0b87, 0x3dcb, 0x360d, 0x218b,
+ 0x512f, 0x7dc9, 0x6a4d, 0x630a, 0x3547, 0x1dd2, 0x5aea, 0x69a5,
+ 0x7bfa, 0x5e4f, 0x1519, 0x6430, 0x3a0e, 0x5eb3, 0x5425, 0x0c7a,
+ 0x5540, 0x3670, 0x63c1, 0x31e9, 0x5a39, 0x2de7, 0x5979, 0x2891,
+ 0x1562, 0x014b, 0x5b05, 0x2756, 0x5a34, 0x13aa, 0x6cb5, 0x2c36,
+ 0x5e72, 0x1306, 0x0861, 0x15ef, 0x1ee8, 0x5a37, 0x7ac4, 0x45dd,
+ 0x44c4, 0x7266, 0x2f41, 0x3ccc, 0x045e, 0x7d40, 0x7c66, 0x0fa0,
+};
+
+static const u16 sunxi_nfc_randomizer_ecc1024_seeds[] = {
+ 0x2cf5, 0x35f1, 0x63a4, 0x5274, 0x2bd2, 0x778b, 0x7285, 0x32b6,
+ 0x6a5c, 0x70d6, 0x757d, 0x6769, 0x5375, 0x1e81, 0x0cf3, 0x3982,
+ 0x6787, 0x042a, 0x6c49, 0x1925, 0x56a8, 0x40a9, 0x063e, 0x7bd9,
+ 0x4dbf, 0x55ec, 0x672e, 0x7334, 0x5185, 0x4d00, 0x232a, 0x7e07,
+ 0x445d, 0x6b92, 0x528f, 0x4255, 0x53ba, 0x7d82, 0x2a2e, 0x3a4e,
+ 0x75eb, 0x450c, 0x6844, 0x1b5d, 0x581a, 0x4cc6, 0x0379, 0x37b2,
+ 0x419f, 0x0e92, 0x6b27, 0x5624, 0x01e3, 0x07c1, 0x44a5, 0x130c,
+ 0x13e8, 0x5910, 0x0876, 0x60c5, 0x54e3, 0x5b7f, 0x2269, 0x509f,
+ 0x7665, 0x36fd, 0x3e9a, 0x0579, 0x6295, 0x14ef, 0x0a81, 0x1bcc,
+ 0x4b16, 0x64db, 0x0514, 0x4f07, 0x0591, 0x3576, 0x6853, 0x0d9e,
+ 0x259f, 0x38b7, 0x64fb, 0x3094, 0x4693, 0x6ddd, 0x29bb, 0x0bc8,
+ 0x3f47, 0x490e, 0x0c0e, 0x7933, 0x3c9e, 0x5840, 0x398d, 0x3e68,
+ 0x4af1, 0x71f5, 0x57cf, 0x1121, 0x64eb, 0x3579, 0x15ac, 0x584d,
+ 0x5f2a, 0x47e2, 0x6528, 0x6eac, 0x196e, 0x6b96, 0x0450, 0x0179,
+ 0x609c, 0x06e1, 0x4626, 0x42c7, 0x273e, 0x486f, 0x0705, 0x1601,
+ 0x145b, 0x407e, 0x062b, 0x57a5, 0x53f9, 0x5659, 0x4410, 0x3ccd,
+};
+
+static u16 sunxi_nfc_randomizer_step(u16 state, int count)
+{
+ state &= 0x7fff;
+
+ /*
+ * This loop is just a simple implementation of a Fibonacci LFSR using
+ * the x16 + x15 + 1 polynomial.
+ */
+ while (count--)
+ state = ((state >> 1) |
+ (((state ^ (state >> 1)) & 1) << 14)) & 0x7fff;
+
+ return state;
+}
+
+static u16 sunxi_nfc_randomizer_state(struct mtd_info *mtd, int page, bool ecc)
+{
+ const u16 *seeds = sunxi_nfc_randomizer_page_seeds;
+ int mod = mtd_div_by_ws(mtd->erasesize, mtd);
+
+ if (mod > ARRAY_SIZE(sunxi_nfc_randomizer_page_seeds))
+ mod = ARRAY_SIZE(sunxi_nfc_randomizer_page_seeds);
+
+ if (ecc) {
+ if (mtd->ecc_step_size == 512)
+ seeds = sunxi_nfc_randomizer_ecc512_seeds;
+ else
+ seeds = sunxi_nfc_randomizer_ecc1024_seeds;
+ }
+
+ return seeds[page % mod];
+}
+
+static void sunxi_nfc_randomizer_config(struct mtd_info *mtd,
+ int page, bool ecc)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+ u32 ecc_ctl = readl(nfc->regs + NFC_REG_ECC_CTL);
+ u16 state;
+
+ if (!(nand->options & NAND_NEED_SCRAMBLING))
+ return;
+
+ ecc_ctl = readl(nfc->regs + NFC_REG_ECC_CTL);
+ state = sunxi_nfc_randomizer_state(mtd, page, ecc);
+ ecc_ctl = readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_SEED_MSK;
+ writel(ecc_ctl | NFC_RANDOM_SEED(state), nfc->regs + NFC_REG_ECC_CTL);
+}
+
+static void sunxi_nfc_randomizer_enable(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+
+ if (!(nand->options & NAND_NEED_SCRAMBLING))
+ return;
+
+ writel(readl(nfc->regs + NFC_REG_ECC_CTL) | NFC_RANDOM_EN,
+ nfc->regs + NFC_REG_ECC_CTL);
+}
+
+static void sunxi_nfc_randomizer_disable(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd_to_nand(mtd);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+
+ if (!(nand->options & NAND_NEED_SCRAMBLING))
+ return;
+
+ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_RANDOM_EN,
+ nfc->regs + NFC_REG_ECC_CTL);
+}
+
+static void sunxi_nfc_randomize_bbm(struct mtd_info *mtd, int page, u8 *bbm)
+{
+ u16 state = sunxi_nfc_randomizer_state(mtd, page, true);
+
+ bbm[0] ^= state;
+ bbm[1] ^= sunxi_nfc_randomizer_step(state, 8);
+}
+
+static void sunxi_nfc_randomizer_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len,
+ bool ecc, int page)
+{
+ sunxi_nfc_randomizer_config(mtd, page, ecc);
+ sunxi_nfc_randomizer_enable(mtd);
+ sunxi_nfc_write_buf(mtd, buf, len);
+ sunxi_nfc_randomizer_disable(mtd);
+}
+
+static void sunxi_nfc_randomizer_read_buf(struct mtd_info *mtd, uint8_t *buf,
+ int len, bool ecc, int page)
+{
+ sunxi_nfc_randomizer_config(mtd, page, ecc);
+ sunxi_nfc_randomizer_enable(mtd);
+ sunxi_nfc_read_buf(mtd, buf, len);
+ sunxi_nfc_randomizer_disable(mtd);
+}
+
static void sunxi_nfc_hw_ecc_enable(struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
@@ -574,18 +743,20 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
u8 *data, int data_off,
u8 *oob, int oob_off,
int *cur_off,
- unsigned int *max_bitflips)
+ unsigned int *max_bitflips,
+ bool bbm, int page)
{
struct nand_chip *nand = mtd_to_nand(mtd);
struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
struct nand_ecc_ctrl *ecc = &nand->ecc;
+ int raw_mode = 0;
u32 status;
int ret;
if (*cur_off != data_off)
nand->cmdfunc(mtd, NAND_CMD_RNDOUT, data_off, -1);
- sunxi_nfc_read_buf(mtd, NULL, ecc->size);
+ sunxi_nfc_randomizer_read_buf(mtd, NULL, ecc->size, false, page);
if (data_off + ecc->size != oob_off)
nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
@@ -594,25 +765,54 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
if (ret)
return ret;
+ sunxi_nfc_randomizer_enable(mtd);
writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP,
nfc->regs + NFC_REG_CMD);
ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ sunxi_nfc_randomizer_disable(mtd);
if (ret)
return ret;
+ *cur_off = oob_off + ecc->bytes + 4;
+
status = readl(nfc->regs + NFC_REG_ECC_ST);
+ if (status & NFC_ECC_PAT_FOUND(0)) {
+ u8 pattern = 0xff;
+
+ if (unlikely(!(readl(nfc->regs + NFC_REG_PAT_ID) & 0x1)))
+ pattern = 0x0;
+
+ memset(data, pattern, ecc->size);
+ memset(oob, pattern, ecc->bytes + 4);
+
+ return 1;
+ }
+
ret = NFC_ECC_ERR_CNT(0, readl(nfc->regs + NFC_REG_ECC_ERR_CNT(0)));
memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE, ecc->size);
nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
- sunxi_nfc_read_buf(mtd, oob, ecc->bytes + 4);
+ sunxi_nfc_randomizer_read_buf(mtd, oob, ecc->bytes + 4, true, page);
if (status & NFC_ECC_ERR(0)) {
+ /*
+ * Re-read the data with the randomizer disabled to identify
+ * bitflips in erased pages.
+ */
+ if (nand->options & NAND_NEED_SCRAMBLING) {
+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, data_off, -1);
+ nand->read_buf(mtd, data, ecc->size);
+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
+ nand->read_buf(mtd, oob, ecc->bytes + 4);
+ }
+
ret = nand_check_erased_ecc_chunk(data, ecc->size,
oob, ecc->bytes + 4,
NULL, 0, ecc->strength);
+ if (ret >= 0)
+ raw_mode = 1;
} else {
/*
* The engine protects 4 bytes of OOB data per chunk.
@@ -620,6 +820,10 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
*/
sunxi_nfc_user_data_to_buf(readl(nfc->regs + NFC_REG_USER_DATA(0)),
oob);
+
+ /* De-randomize the Bad Block Marker. */
+ if (bbm && nand->options & NAND_NEED_SCRAMBLING)
+ sunxi_nfc_randomize_bbm(mtd, page, oob);
}
if (ret < 0) {
@@ -629,13 +833,12 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
*max_bitflips = max_t(unsigned int, *max_bitflips, ret);
}
- *cur_off = oob_off + ecc->bytes + 4;
-
- return 0;
+ return raw_mode;
}
static void sunxi_nfc_hw_ecc_read_extra_oob(struct mtd_info *mtd,
- u8 *oob, int *cur_off)
+ u8 *oob, int *cur_off,
+ bool randomize, int page)
{
struct nand_chip *nand = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &nand->ecc;
@@ -649,7 +852,11 @@ static void sunxi_nfc_hw_ecc_read_extra_oob(struct mtd_info *mtd,
nand->cmdfunc(mtd, NAND_CMD_RNDOUT,
offset + mtd->writesize, -1);
- sunxi_nfc_read_buf(mtd, oob + offset, len);
+ if (!randomize)
+ sunxi_nfc_read_buf(mtd, oob + offset, len);
+ else
+ sunxi_nfc_randomizer_read_buf(mtd, oob + offset, len,
+ false, page);
*cur_off = mtd->oobsize + mtd->writesize;
}
@@ -662,7 +869,8 @@ static inline u32 sunxi_nfc_buf_to_user_data(const u8 *buf)
static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
const u8 *data, int data_off,
const u8 *oob, int oob_off,
- int *cur_off)
+ int *cur_off, bool bbm,
+ int page)
{
struct nand_chip *nand = mtd_to_nand(mtd);
struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
@@ -672,11 +880,20 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
if (data_off != *cur_off)
nand->cmdfunc(mtd, NAND_CMD_RNDIN, data_off, -1);
- sunxi_nfc_write_buf(mtd, data, ecc->size);
+ sunxi_nfc_randomizer_write_buf(mtd, data, ecc->size, false, page);
/* Fill OOB data in */
- writel(sunxi_nfc_buf_to_user_data(oob),
- nfc->regs + NFC_REG_USER_DATA(0));
+ if ((nand->options & NAND_NEED_SCRAMBLING) && bbm) {
+ u8 user_data[4];
+
+ memcpy(user_data, oob, 4);
+ sunxi_nfc_randomize_bbm(mtd, page, user_data);
+ writel(sunxi_nfc_buf_to_user_data(user_data),
+ nfc->regs + NFC_REG_USER_DATA(0));
+ } else {
+ writel(sunxi_nfc_buf_to_user_data(oob),
+ nfc->regs + NFC_REG_USER_DATA(0));
+ }
if (data_off + ecc->size != oob_off)
nand->cmdfunc(mtd, NAND_CMD_RNDIN, oob_off, -1);
@@ -685,11 +902,13 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
if (ret)
return ret;
+ sunxi_nfc_randomizer_enable(mtd);
writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD |
NFC_ACCESS_DIR | NFC_ECC_OP,
nfc->regs + NFC_REG_CMD);
ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ sunxi_nfc_randomizer_disable(mtd);
if (ret)
return ret;
@@ -699,7 +918,8 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
}
static void sunxi_nfc_hw_ecc_write_extra_oob(struct mtd_info *mtd,
- u8 *oob, int *cur_off)
+ u8 *oob, int *cur_off,
+ int page)
{
struct nand_chip *nand = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &nand->ecc;
@@ -713,7 +933,7 @@ static void sunxi_nfc_hw_ecc_write_extra_oob(struct mtd_info *mtd,
nand->cmdfunc(mtd, NAND_CMD_RNDIN,
offset + mtd->writesize, -1);
- sunxi_nfc_write_buf(mtd, oob + offset, len);
+ sunxi_nfc_randomizer_write_buf(mtd, oob + offset, len, false, page);
*cur_off = mtd->oobsize + mtd->writesize;
}
@@ -725,6 +945,7 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc = &chip->ecc;
unsigned int max_bitflips = 0;
int ret, i, cur_off = 0;
+ bool raw_mode = false;
sunxi_nfc_hw_ecc_enable(mtd);
@@ -736,13 +957,17 @@ static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob,
oob_off + mtd->writesize,
- &cur_off, &max_bitflips);
- if (ret)
+ &cur_off, &max_bitflips,
+ !i, page);
+ if (ret < 0)
return ret;
+ else if (ret)
+ raw_mode = true;
}
if (oob_required)
- sunxi_nfc_hw_ecc_read_extra_oob(mtd, chip->oob_poi, &cur_off);
+ sunxi_nfc_hw_ecc_read_extra_oob(mtd, chip->oob_poi, &cur_off,
+ !raw_mode, page);
sunxi_nfc_hw_ecc_disable(mtd);
@@ -767,13 +992,14 @@ static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd,
ret = sunxi_nfc_hw_ecc_write_chunk(mtd, data, data_off, oob,
oob_off + mtd->writesize,
- &cur_off);
+ &cur_off, !i, page);
if (ret)
return ret;
}
- if (oob_required)
- sunxi_nfc_hw_ecc_write_extra_oob(mtd, chip->oob_poi, &cur_off);
+ if (oob_required || (chip->options & NAND_NEED_SCRAMBLING))
+ sunxi_nfc_hw_ecc_write_extra_oob(mtd, chip->oob_poi,
+ &cur_off, page);
sunxi_nfc_hw_ecc_disable(mtd);
@@ -788,6 +1014,7 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc = &chip->ecc;
unsigned int max_bitflips = 0;
int ret, i, cur_off = 0;
+ bool raw_mode = false;
sunxi_nfc_hw_ecc_enable(mtd);
@@ -799,13 +1026,16 @@ static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd,
ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob,
oob_off, &cur_off,
- &max_bitflips);
- if (ret)
+ &max_bitflips, !i, page);
+ if (ret < 0)
return ret;
+ else if (ret)
+ raw_mode = true;
}
if (oob_required)
- sunxi_nfc_hw_ecc_read_extra_oob(mtd, chip->oob_poi, &cur_off);
+ sunxi_nfc_hw_ecc_read_extra_oob(mtd, chip->oob_poi, &cur_off,
+ !raw_mode, page);
sunxi_nfc_hw_ecc_disable(mtd);
@@ -829,13 +1059,15 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd,
const u8 *oob = chip->oob_poi + (i * (ecc->bytes + 4));
ret = sunxi_nfc_hw_ecc_write_chunk(mtd, data, data_off,
- oob, oob_off, &cur_off);
+ oob, oob_off, &cur_off,
+ false, page);
if (ret)
return ret;
}
- if (oob_required)
- sunxi_nfc_hw_ecc_write_extra_oob(mtd, chip->oob_poi, &cur_off);
+ if (oob_required || (chip->options & NAND_NEED_SCRAMBLING))
+ sunxi_nfc_hw_ecc_write_extra_oob(mtd, chip->oob_poi,
+ &cur_off, page);
sunxi_nfc_hw_ecc_disable(mtd);
@@ -1345,6 +1577,9 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
if (nand->bbt_options & NAND_BBT_USE_FLASH)
nand->bbt_options |= NAND_BBT_NO_OOB;
+ if (nand->options & NAND_NEED_SCRAMBLING)
+ nand->options |= NAND_NO_SUBPAGE_WRITE;
+
ret = sunxi_nand_chip_init_timings(chip, np);
if (ret) {
dev_err(dev, "could not configure chip timings: %d\n", ret);
diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 034420f313d5..293feb19b0b1 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -795,8 +795,6 @@ static int vf610_nfc_probe(struct platform_device *pdev)
goto error;
}
- /* propagate ecc.layout to mtd_info */
- mtd->ecclayout = chip->ecc.layout;
chip->ecc.read_page = vf610_nfc_read_page;
chip->ecc.write_page = vf610_nfc_write_page;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 43b3392ffee7..af28bb3ae7cf 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1124,11 +1124,7 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
(int)len);
- if (ops->mode == MTD_OPS_AUTO_OOB)
- oobsize = this->ecclayout->oobavail;
- else
- oobsize = mtd->oobsize;
-
+ oobsize = mtd_oobavail(mtd, ops);
oobcolumn = from & (mtd->oobsize - 1);
/* Do not allow reads past end of device */
@@ -1229,11 +1225,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
(int)len);
- if (ops->mode == MTD_OPS_AUTO_OOB)
- oobsize = this->ecclayout->oobavail;
- else
- oobsize = mtd->oobsize;
-
+ oobsize = mtd_oobavail(mtd, ops);
oobcolumn = from & (mtd->oobsize - 1);
/* Do not allow reads past end of device */
@@ -1365,7 +1357,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
ops->oobretlen = 0;
if (mode == MTD_OPS_AUTO_OOB)
- oobsize = this->ecclayout->oobavail;
+ oobsize = mtd->oobavail;
else
oobsize = mtd->oobsize;
@@ -1885,12 +1877,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
/* Check zero length */
if (!len)
return 0;
-
- if (ops->mode == MTD_OPS_AUTO_OOB)
- oobsize = this->ecclayout->oobavail;
- else
- oobsize = mtd->oobsize;
-
+ oobsize = mtd_oobavail(mtd, ops);
oobcolumn = to & (mtd->oobsize - 1);
column = to & (mtd->writesize - 1);
@@ -2063,7 +2050,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
ops->oobretlen = 0;
if (mode == MTD_OPS_AUTO_OOB)
- oobsize = this->ecclayout->oobavail;
+ oobsize = mtd->oobavail;
else
oobsize = mtd->oobsize;
@@ -2599,6 +2586,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
*/
static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
+ struct onenand_chip *this = mtd->priv;
int ret;
ret = onenand_block_isbad(mtd, ofs);
@@ -2610,7 +2598,7 @@ static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
}
onenand_get_device(mtd, FL_WRITING);
- ret = mtd_block_markbad(mtd, ofs);
+ ret = this->block_markbad(mtd, ofs);
onenand_release_device(mtd);
return ret;
}
@@ -4049,12 +4037,10 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
* The number of bytes available for a client to place data into
* the out of band area
*/
- this->ecclayout->oobavail = 0;
+ mtd->oobavail = 0;
for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
this->ecclayout->oobfree[i].length; i++)
- this->ecclayout->oobavail +=
- this->ecclayout->oobfree[i].length;
- mtd->oobavail = this->ecclayout->oobavail;
+ mtd->oobavail += this->ecclayout->oobfree[i].length;
mtd->ecclayout = this->ecclayout;
mtd->ecc_strength = 1;
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 08d0085f3e93..680188a88130 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -179,7 +179,7 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
* by the onenand_release function.
*
*/
-int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+static int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
{
struct onenand_chip *this = mtd->priv;
struct bbm_info *bbm = this->bbm;
@@ -247,6 +247,3 @@ int onenand_default_bbt(struct mtd_info *mtd)
return onenand_scan_bbt(mtd, bbm->badblock_pattern);
}
-
-EXPORT_SYMBOL(onenand_scan_bbt);
-EXPORT_SYMBOL(onenand_default_bbt);
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 0dc927540b3d..d42c98e1f581 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -9,6 +9,7 @@ if MTD_SPI_NOR
config MTD_MT81xx_NOR
tristate "Mediatek MT81xx SPI NOR flash controller"
+ depends on HAS_IOMEM
help
This enables access to SPI NOR flash, using MT81xx SPI NOR flash
controller. This controller does not support generic SPI BUS, it only
@@ -30,7 +31,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS
config SPI_FSL_QUADSPI
tristate "Freescale Quad SPI controller"
- depends on ARCH_MXC || COMPILE_TEST
+ depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
depends on HAS_IOMEM
help
This enables support for the Quad SPI controller in master mode.
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 54640f1eb3a1..9ab2b51d54b8 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -213,6 +213,7 @@ enum fsl_qspi_devtype {
FSL_QUADSPI_IMX6SX,
FSL_QUADSPI_IMX7D,
FSL_QUADSPI_IMX6UL,
+ FSL_QUADSPI_LS1021A,
};
struct fsl_qspi_devtype_data {
@@ -258,6 +259,14 @@ static struct fsl_qspi_devtype_data imx6ul_data = {
| QUADSPI_QUIRK_4X_INT_CLK,
};
+static struct fsl_qspi_devtype_data ls1021a_data = {
+ .devtype = FSL_QUADSPI_LS1021A,
+ .rxfifo = 128,
+ .txfifo = 64,
+ .ahb_buf_size = 1024,
+ .driver_data = 0,
+};
+
#define FSL_QSPI_MAX_CHIP 4
struct fsl_qspi {
struct spi_nor nor[FSL_QSPI_MAX_CHIP];
@@ -275,6 +284,7 @@ struct fsl_qspi {
u32 clk_rate;
unsigned int chip_base_addr; /* We may support two chips. */
bool has_second_chip;
+ bool big_endian;
struct mutex lock;
struct pm_qos_request pm_qos_req;
};
@@ -300,6 +310,28 @@ static inline int needs_wakeup_wait_mode(struct fsl_qspi *q)
}
/*
+ * R/W functions for big- or little-endian registers:
+ * The qSPI controller's endian is independent of the CPU core's endian.
+ * So far, although the CPU core is little-endian but the qSPI have two
+ * versions for big-endian and little-endian.
+ */
+static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr)
+{
+ if (q->big_endian)
+ iowrite32be(val, addr);
+ else
+ iowrite32(val, addr);
+}
+
+static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr)
+{
+ if (q->big_endian)
+ return ioread32be(addr);
+ else
+ return ioread32(addr);
+}
+
+/*
* An IC bug makes us to re-arrange the 32-bit data.
* The following chips, such as IMX6SLX, have fixed this bug.
*/
@@ -310,14 +342,14 @@ static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a)
static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q)
{
- writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
- writel(QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
+ qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+ qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR);
}
static inline void fsl_qspi_lock_lut(struct fsl_qspi *q)
{
- writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
- writel(QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
+ qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY);
+ qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
}
static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id)
@@ -326,8 +358,8 @@ static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id)
u32 reg;
/* clear interrupt */
- reg = readl(q->iobase + QUADSPI_FR);
- writel(reg, q->iobase + QUADSPI_FR);
+ reg = qspi_readl(q, q->iobase + QUADSPI_FR);
+ qspi_writel(q, reg, q->iobase + QUADSPI_FR);
if (reg & QUADSPI_FR_TFF_MASK)
complete(&q->c);
@@ -348,7 +380,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
/* Clear all the LUT table */
for (i = 0; i < QUADSPI_LUT_NUM; i++)
- writel(0, base + QUADSPI_LUT_BASE + i * 4);
+ qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
/* Quad Read */
lut_base = SEQID_QUAD_READ * 4;
@@ -364,14 +396,15 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
dummy = 8;
}
- writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+ qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
- writel(LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
+ qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
base + QUADSPI_LUT(lut_base + 1));
/* Write enable */
lut_base = SEQID_WREN * 4;
- writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + QUADSPI_LUT(lut_base));
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WREN),
+ base + QUADSPI_LUT(lut_base));
/* Page Program */
lut_base = SEQID_PP * 4;
@@ -385,13 +418,15 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
addrlen = ADDR32BIT;
}
- writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+ qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
- writel(LUT0(FSL_WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1));
+ qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
+ base + QUADSPI_LUT(lut_base + 1));
/* Read Status */
lut_base = SEQID_RDSR * 4;
- writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(FSL_READ, PAD1, 0x1),
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDSR) |
+ LUT1(FSL_READ, PAD1, 0x1),
base + QUADSPI_LUT(lut_base));
/* Erase a sector */
@@ -400,40 +435,46 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
cmd = q->nor[0].erase_opcode;
addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
- writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+ qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
/* Erase the whole chip */
lut_base = SEQID_CHIP_ERASE * 4;
- writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
base + QUADSPI_LUT(lut_base));
/* READ ID */
lut_base = SEQID_RDID * 4;
- writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(FSL_READ, PAD1, 0x8),
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDID) |
+ LUT1(FSL_READ, PAD1, 0x8),
base + QUADSPI_LUT(lut_base));
/* Write Register */
lut_base = SEQID_WRSR * 4;
- writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(FSL_WRITE, PAD1, 0x2),
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRSR) |
+ LUT1(FSL_WRITE, PAD1, 0x2),
base + QUADSPI_LUT(lut_base));
/* Read Configuration Register */
lut_base = SEQID_RDCR * 4;
- writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(FSL_READ, PAD1, 0x1),
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDCR) |
+ LUT1(FSL_READ, PAD1, 0x1),
base + QUADSPI_LUT(lut_base));
/* Write disable */
lut_base = SEQID_WRDI * 4;
- writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + QUADSPI_LUT(lut_base));
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRDI),
+ base + QUADSPI_LUT(lut_base));
/* Enter 4 Byte Mode (Micron) */
lut_base = SEQID_EN4B * 4;
- writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + QUADSPI_LUT(lut_base));
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_EN4B),
+ base + QUADSPI_LUT(lut_base));
/* Enter 4 Byte Mode (Spansion) */
lut_base = SEQID_BRWR * 4;
- writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + QUADSPI_LUT(lut_base));
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR),
+ base + QUADSPI_LUT(lut_base));
fsl_qspi_lock_lut(q);
}
@@ -488,15 +529,16 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
q->chip_base_addr, addr, len, cmd);
/* save the reg */
- reg = readl(base + QUADSPI_MCR);
+ reg = qspi_readl(q, base + QUADSPI_MCR);
- writel(q->memmap_phy + q->chip_base_addr + addr, base + QUADSPI_SFAR);
- writel(QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
+ qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
+ base + QUADSPI_SFAR);
+ qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
base + QUADSPI_RBCT);
- writel(reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
+ qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
do {
- reg2 = readl(base + QUADSPI_SR);
+ reg2 = qspi_readl(q, base + QUADSPI_SR);
if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) {
udelay(1);
dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2);
@@ -507,21 +549,22 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
/* trigger the LUT now */
seqid = fsl_qspi_get_seqid(q, cmd);
- writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR);
+ qspi_writel(q, (seqid << QUADSPI_IPCR_SEQID_SHIFT) | len,
+ base + QUADSPI_IPCR);
/* Wait for the interrupt. */
if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) {
dev_err(q->dev,
"cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n",
- cmd, addr, readl(base + QUADSPI_FR),
- readl(base + QUADSPI_SR));
+ cmd, addr, qspi_readl(q, base + QUADSPI_FR),
+ qspi_readl(q, base + QUADSPI_SR));
err = -ETIMEDOUT;
} else {
err = 0;
}
/* restore the MCR */
- writel(reg, base + QUADSPI_MCR);
+ qspi_writel(q, reg, base + QUADSPI_MCR);
return err;
}
@@ -533,7 +576,7 @@ static void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf)
int i = 0;
while (len > 0) {
- tmp = readl(q->iobase + QUADSPI_RBDR + i * 4);
+ tmp = qspi_readl(q, q->iobase + QUADSPI_RBDR + i * 4);
tmp = fsl_qspi_endian_xchg(q, tmp);
dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n",
q->chip_base_addr, tmp);
@@ -561,9 +604,9 @@ static inline void fsl_qspi_invalid(struct fsl_qspi *q)
{
u32 reg;
- reg = readl(q->iobase + QUADSPI_MCR);
+ reg = qspi_readl(q, q->iobase + QUADSPI_MCR);
reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK;
- writel(reg, q->iobase + QUADSPI_MCR);
+ qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
/*
* The minimum delay : 1 AHB + 2 SFCK clocks.
@@ -572,7 +615,7 @@ static inline void fsl_qspi_invalid(struct fsl_qspi *q)
udelay(1);
reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK);
- writel(reg, q->iobase + QUADSPI_MCR);
+ qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
}
static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
@@ -586,20 +629,20 @@ static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
q->chip_base_addr, to, count);
/* clear the TX FIFO. */
- tmp = readl(q->iobase + QUADSPI_MCR);
- writel(tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR);
+ tmp = qspi_readl(q, q->iobase + QUADSPI_MCR);
+ qspi_writel(q, tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR);
/* fill the TX data to the FIFO */
for (j = 0, i = ((count + 3) / 4); j < i; j++) {
tmp = fsl_qspi_endian_xchg(q, *txbuf);
- writel(tmp, q->iobase + QUADSPI_TBDR);
+ qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
txbuf++;
}
/* fill the TXFIFO upto 16 bytes for i.MX7d */
if (needs_fill_txfifo(q))
for (; i < 4; i++)
- writel(tmp, q->iobase + QUADSPI_TBDR);
+ qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
/* Trigger it */
ret = fsl_qspi_runcmd(q, opcode, to, count);
@@ -615,10 +658,10 @@ static void fsl_qspi_set_map_addr(struct fsl_qspi *q)
int nor_size = q->nor_size;
void __iomem *base = q->iobase;
- writel(nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
- writel(nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
- writel(nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
- writel(nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
+ qspi_writel(q, nor_size + q->memmap_phy, base + QUADSPI_SFA1AD);
+ qspi_writel(q, nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD);
+ qspi_writel(q, nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD);
+ qspi_writel(q, nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD);
}
/*
@@ -640,24 +683,26 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
int seqid;
/* AHB configuration for access buffer 0/1/2 .*/
- writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
- writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
- writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
+ qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
+ qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
+ qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
/*
* Set ADATSZ with the maximum AHB buffer size to improve the
* read performance.
*/
- writel(QUADSPI_BUF3CR_ALLMST_MASK | ((q->devtype_data->ahb_buf_size / 8)
- << QUADSPI_BUF3CR_ADATSZ_SHIFT), base + QUADSPI_BUF3CR);
+ qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
+ ((q->devtype_data->ahb_buf_size / 8)
+ << QUADSPI_BUF3CR_ADATSZ_SHIFT),
+ base + QUADSPI_BUF3CR);
/* We only use the buffer3 */
- writel(0, base + QUADSPI_BUF0IND);
- writel(0, base + QUADSPI_BUF1IND);
- writel(0, base + QUADSPI_BUF2IND);
+ qspi_writel(q, 0, base + QUADSPI_BUF0IND);
+ qspi_writel(q, 0, base + QUADSPI_BUF1IND);
+ qspi_writel(q, 0, base + QUADSPI_BUF2IND);
/* Set the default lut sequence for AHB Read. */
seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
- writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
+ qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
q->iobase + QUADSPI_BFGENCR);
}
@@ -713,7 +758,7 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q)
return ret;
/* Reset the module */
- writel(QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
+ qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK,
base + QUADSPI_MCR);
udelay(1);
@@ -721,24 +766,24 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q)
fsl_qspi_init_lut(q);
/* Disable the module */
- writel(QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
+ qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK,
base + QUADSPI_MCR);
- reg = readl(base + QUADSPI_SMPR);
- writel(reg & ~(QUADSPI_SMPR_FSDLY_MASK
+ reg = qspi_readl(q, base + QUADSPI_SMPR);
+ qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK
| QUADSPI_SMPR_FSPHS_MASK
| QUADSPI_SMPR_HSENA_MASK
| QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR);
/* Enable the module */
- writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
+ qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK,
base + QUADSPI_MCR);
/* clear all interrupt status */
- writel(0xffffffff, q->iobase + QUADSPI_FR);
+ qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR);
/* enable the interrupt */
- writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
+ qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
return 0;
}
@@ -776,6 +821,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
{ .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, },
{ .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, },
{ .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, },
+ { .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
@@ -954,6 +1000,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
if (IS_ERR(q->iobase))
return PTR_ERR(q->iobase);
+ q->big_endian = of_property_read_bool(np, "big-endian");
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"QuadSPI-memory");
if (!devm_request_mem_region(dev, res->start, resource_size(res),
@@ -1101,8 +1148,8 @@ static int fsl_qspi_remove(struct platform_device *pdev)
}
/* disable the hardware */
- writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
- writel(0x0, q->iobase + QUADSPI_RSER);
+ qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
+ qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER);
mutex_destroy(&q->lock);
diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c
index d5f850d035bb..8bed1a4cb79c 100644
--- a/drivers/mtd/spi-nor/mtk-quadspi.c
+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
@@ -371,8 +371,8 @@ static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
return ret;
}
-static int __init mtk_nor_init(struct mt8173_nor *mt8173_nor,
- struct device_node *flash_node)
+static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
+ struct device_node *flash_node)
{
int ret;
struct spi_nor *nor;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index ed0c19c558b5..157841dc3e99 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -61,14 +61,20 @@ struct flash_info {
u16 addr_width;
u16 flags;
-#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
-#define SST_WRITE 0x04 /* use SST byte programming */
-#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
-#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
-#define USE_FSR 0x80 /* use flag status register */
+#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */
+#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */
+#define SST_WRITE BIT(2) /* use SST byte programming */
+#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */
+#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */
+#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */
+#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */
+#define USE_FSR BIT(7) /* use flag status register */
+#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */
+#define SPI_NOR_HAS_TB BIT(9) /*
+ * Flash SR has Top/Bottom (TB) protect
+ * bit. Must be used with
+ * SPI_NOR_HAS_LOCK.
+ */
};
#define JEDEC_MFR(info) ((info)->id[0])
@@ -434,32 +440,58 @@ static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs,
} else {
pow = ((sr & mask) ^ mask) >> shift;
*len = mtd->size >> pow;
- *ofs = mtd->size - *len;
+ if (nor->flags & SNOR_F_HAS_SR_TB && sr & SR_TB)
+ *ofs = 0;
+ else
+ *ofs = mtd->size - *len;
}
}
/*
- * Return 1 if the entire region is locked, 0 otherwise
+ * Return 1 if the entire region is locked (if @locked is true) or unlocked (if
+ * @locked is false); 0 otherwise
*/
-static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
- u8 sr)
+static int stm_check_lock_status_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+ u8 sr, bool locked)
{
loff_t lock_offs;
uint64_t lock_len;
+ if (!len)
+ return 1;
+
stm_get_locked_range(nor, sr, &lock_offs, &lock_len);
- return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
+ if (locked)
+ /* Requested range is a sub-range of locked range */
+ return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
+ else
+ /* Requested range does not overlap with locked range */
+ return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs);
+}
+
+static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+ u8 sr)
+{
+ return stm_check_lock_status_sr(nor, ofs, len, sr, true);
+}
+
+static int stm_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+ u8 sr)
+{
+ return stm_check_lock_status_sr(nor, ofs, len, sr, false);
}
/*
* Lock a region of the flash. Compatible with ST Micro and similar flash.
- * Supports only the block protection bits BP{0,1,2} in the status register
+ * Supports the block protection bits BP{0,1,2} in the status register
* (SR). Does not support these features found in newer SR bitfields:
- * - TB: top/bottom protect - only handle TB=0 (top protect)
* - SEC: sector/block protect - only handle SEC=0 (block protect)
* - CMP: complement protect - only support CMP=0 (range is not complemented)
*
+ * Support for the following is provided conditionally for some flash:
+ * - TB: top/bottom protect
+ *
* Sample table portion for 8MB flash (Winbond w25q64fw):
*
* SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion
@@ -472,6 +504,13 @@ static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
* 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4
* 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2
* X | X | 1 | 1 | 1 | 8 MB | ALL
+ * ------|-------|-------|-------|-------|---------------|-------------------
+ * 0 | 1 | 0 | 0 | 1 | 128 KB | Lower 1/64
+ * 0 | 1 | 0 | 1 | 0 | 256 KB | Lower 1/32
+ * 0 | 1 | 0 | 1 | 1 | 512 KB | Lower 1/16
+ * 0 | 1 | 1 | 0 | 0 | 1 MB | Lower 1/8
+ * 0 | 1 | 1 | 0 | 1 | 2 MB | Lower 1/4
+ * 0 | 1 | 1 | 1 | 0 | 4 MB | Lower 1/2
*
* Returns negative on errors, 0 on success.
*/
@@ -481,20 +520,39 @@ static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
int status_old, status_new;
u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
u8 shift = ffs(mask) - 1, pow, val;
+ loff_t lock_len;
+ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+ bool use_top;
int ret;
status_old = read_sr(nor);
if (status_old < 0)
return status_old;
- /* SPI NOR always locks to the end */
- if (ofs + len != mtd->size) {
- /* Does combined region extend to end? */
- if (!stm_is_locked_sr(nor, ofs + len, mtd->size - ofs - len,
- status_old))
- return -EINVAL;
- len = mtd->size - ofs;
- }
+ /* If nothing in our range is unlocked, we don't need to do anything */
+ if (stm_is_locked_sr(nor, ofs, len, status_old))
+ return 0;
+
+ /* If anything below us is unlocked, we can't use 'bottom' protection */
+ if (!stm_is_locked_sr(nor, 0, ofs, status_old))
+ can_be_bottom = false;
+
+ /* If anything above us is unlocked, we can't use 'top' protection */
+ if (!stm_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
+ status_old))
+ can_be_top = false;
+
+ if (!can_be_bottom && !can_be_top)
+ return -EINVAL;
+
+ /* Prefer top, if both are valid */
+ use_top = can_be_top;
+
+ /* lock_len: length of region that should end up locked */
+ if (use_top)
+ lock_len = mtd->size - ofs;
+ else
+ lock_len = ofs + len;
/*
* Need smallest pow such that:
@@ -505,7 +563,7 @@ static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
*
* pow = ceil(log2(size / len)) = log2(size) - floor(log2(len))
*/
- pow = ilog2(mtd->size) - ilog2(len);
+ pow = ilog2(mtd->size) - ilog2(lock_len);
val = mask - (pow << shift);
if (val & ~mask)
return -EINVAL;
@@ -513,10 +571,20 @@ static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
if (!(val & mask))
return -EINVAL;
- status_new = (status_old & ~mask) | val;
+ status_new = (status_old & ~mask & ~SR_TB) | val;
+
+ /* Disallow further writes if WP pin is asserted */
+ status_new |= SR_SRWD;
+
+ if (!use_top)
+ status_new |= SR_TB;
+
+ /* Don't bother if they're the same */
+ if (status_new == status_old)
+ return 0;
/* Only modify protection if it will not unlock other areas */
- if ((status_new & mask) <= (status_old & mask))
+ if ((status_new & mask) < (status_old & mask))
return -EINVAL;
write_enable(nor);
@@ -537,17 +605,40 @@ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
int status_old, status_new;
u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
u8 shift = ffs(mask) - 1, pow, val;
+ loff_t lock_len;
+ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+ bool use_top;
int ret;
status_old = read_sr(nor);
if (status_old < 0)
return status_old;
- /* Cannot unlock; would unlock larger region than requested */
- if (stm_is_locked_sr(nor, ofs - mtd->erasesize, mtd->erasesize,
- status_old))
+ /* If nothing in our range is locked, we don't need to do anything */
+ if (stm_is_unlocked_sr(nor, ofs, len, status_old))
+ return 0;
+
+ /* If anything below us is locked, we can't use 'top' protection */
+ if (!stm_is_unlocked_sr(nor, 0, ofs, status_old))
+ can_be_top = false;
+
+ /* If anything above us is locked, we can't use 'bottom' protection */
+ if (!stm_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
+ status_old))
+ can_be_bottom = false;
+
+ if (!can_be_bottom && !can_be_top)
return -EINVAL;
+ /* Prefer top, if both are valid */
+ use_top = can_be_top;
+
+ /* lock_len: length of region that should remain locked */
+ if (use_top)
+ lock_len = mtd->size - (ofs + len);
+ else
+ lock_len = ofs;
+
/*
* Need largest pow such that:
*
@@ -557,8 +648,8 @@ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
*
* pow = floor(log2(size / len)) = log2(size) - ceil(log2(len))
*/
- pow = ilog2(mtd->size) - order_base_2(mtd->size - (ofs + len));
- if (ofs + len == mtd->size) {
+ pow = ilog2(mtd->size) - order_base_2(lock_len);
+ if (lock_len == 0) {
val = 0; /* fully unlocked */
} else {
val = mask - (pow << shift);
@@ -567,10 +658,21 @@ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
return -EINVAL;
}
- status_new = (status_old & ~mask) | val;
+ status_new = (status_old & ~mask & ~SR_TB) | val;
+
+ /* Don't protect status register if we're fully unlocked */
+ if (lock_len == mtd->size)
+ status_new &= ~SR_SRWD;
+
+ if (!use_top)
+ status_new |= SR_TB;
+
+ /* Don't bother if they're the same */
+ if (status_new == status_old)
+ return 0;
/* Only modify protection if it will not lock other areas */
- if ((status_new & mask) >= (status_old & mask))
+ if ((status_new & mask) > (status_old & mask))
return -EINVAL;
write_enable(nor);
@@ -762,8 +864,8 @@ static const struct flash_info spi_nor_ids[] = {
{ "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
{ "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
@@ -797,6 +899,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) },
{ "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
{ "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) },
@@ -860,11 +963,23 @@ static const struct flash_info spi_nor_ids[] = {
{ "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
{ "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
- { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ {
+ "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
- { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ {
+ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
+ {
+ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
@@ -1100,45 +1215,6 @@ static int spansion_quad_enable(struct spi_nor *nor)
return 0;
}
-static int micron_quad_enable(struct spi_nor *nor)
-{
- int ret;
- u8 val;
-
- ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
- if (ret < 0) {
- dev_err(nor->dev, "error %d reading EVCR\n", ret);
- return ret;
- }
-
- write_enable(nor);
-
- /* set EVCR, enable quad I/O */
- nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON;
- ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1);
- if (ret < 0) {
- dev_err(nor->dev, "error while writing EVCR register\n");
- return ret;
- }
-
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- return ret;
-
- /* read EVCR and check it */
- ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
- if (ret < 0) {
- dev_err(nor->dev, "error %d reading EVCR\n", ret);
- return ret;
- }
- if (val & EVCR_QUAD_EN_MICRON) {
- dev_err(nor->dev, "Micron EVCR Quad bit not clear\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
{
int status;
@@ -1152,12 +1228,7 @@ static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
}
return status;
case SNOR_MFR_MICRON:
- status = micron_quad_enable(nor);
- if (status) {
- dev_err(nor->dev, "Micron quad-read not enabled\n");
- return -EINVAL;
- }
- return status;
+ return 0;
default:
status = spansion_quad_enable(nor);
if (status) {
@@ -1233,9 +1304,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
JEDEC_MFR(info) == SNOR_MFR_INTEL ||
- JEDEC_MFR(info) == SNOR_MFR_SST) {
+ JEDEC_MFR(info) == SNOR_MFR_SST ||
+ info->flags & SPI_NOR_HAS_LOCK) {
write_enable(nor);
write_sr(nor, 0);
+ spi_nor_wait_till_ready(nor);
}
if (!mtd->name)
@@ -1249,7 +1322,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
mtd->_read = spi_nor_read;
/* NOR protection support for STmicro/Micron chips and similar */
- if (JEDEC_MFR(info) == SNOR_MFR_MICRON) {
+ if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
+ info->flags & SPI_NOR_HAS_LOCK) {
nor->flash_lock = stm_lock;
nor->flash_unlock = stm_unlock;
nor->flash_is_locked = stm_is_locked;
@@ -1269,6 +1343,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (info->flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;
+ if (info->flags & SPI_NOR_HAS_TB)
+ nor->flags |= SNOR_F_HAS_SR_TB;
#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
/* prefer "small sector" erase if possible */
diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c
index 31762120eb56..1cb3f7758fb6 100644
--- a/drivers/mtd/tests/oobtest.c
+++ b/drivers/mtd/tests/oobtest.c
@@ -215,19 +215,19 @@ static int verify_eraseblock(int ebnum)
pr_info("ignoring error as within bitflip_limit\n");
}
- if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
+ if (use_offset != 0 || use_len < mtd->oobavail) {
int k;
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail;
+ ops.ooblen = mtd->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
err = mtd_read_oob(mtd, addr, &ops);
- if (err || ops.oobretlen != mtd->ecclayout->oobavail) {
+ if (err || ops.oobretlen != mtd->oobavail) {
pr_err("error: readoob failed at %#llx\n",
(long long)addr);
errcnt += 1;
@@ -244,7 +244,7 @@ static int verify_eraseblock(int ebnum)
/* verify post-(use_offset + use_len) area for 0xff */
k = use_offset + use_len;
bitflips += memffshow(addr, k, readbuf + k,
- mtd->ecclayout->oobavail - k);
+ mtd->oobavail - k);
if (bitflips > bitflip_limit) {
pr_err("error: verify failed at %#llx\n",
@@ -269,8 +269,8 @@ static int verify_eraseblock_in_one_go(int ebnum)
struct mtd_oob_ops ops;
int err = 0;
loff_t addr = (loff_t)ebnum * mtd->erasesize;
- size_t len = mtd->ecclayout->oobavail * pgcnt;
- size_t oobavail = mtd->ecclayout->oobavail;
+ size_t len = mtd->oobavail * pgcnt;
+ size_t oobavail = mtd->oobavail;
size_t bitflips;
int i;
@@ -394,8 +394,8 @@ static int __init mtd_oobtest_init(void)
goto out;
use_offset = 0;
- use_len = mtd->ecclayout->oobavail;
- use_len_max = mtd->ecclayout->oobavail;
+ use_len = mtd->oobavail;
+ use_len_max = mtd->oobavail;
vary_offset = 0;
/* First test: write all OOB, read it back and verify */
@@ -460,8 +460,8 @@ static int __init mtd_oobtest_init(void)
/* Write all eraseblocks */
use_offset = 0;
- use_len = mtd->ecclayout->oobavail;
- use_len_max = mtd->ecclayout->oobavail;
+ use_len = mtd->oobavail;
+ use_len_max = mtd->oobavail;
vary_offset = 1;
prandom_seed_state(&rnd_state, 5);
@@ -471,8 +471,8 @@ static int __init mtd_oobtest_init(void)
/* Check all eraseblocks */
use_offset = 0;
- use_len = mtd->ecclayout->oobavail;
- use_len_max = mtd->ecclayout->oobavail;
+ use_len = mtd->oobavail;
+ use_len_max = mtd->oobavail;
vary_offset = 1;
prandom_seed_state(&rnd_state, 5);
err = verify_all_eraseblocks();
@@ -480,8 +480,8 @@ static int __init mtd_oobtest_init(void)
goto out;
use_offset = 0;
- use_len = mtd->ecclayout->oobavail;
- use_len_max = mtd->ecclayout->oobavail;
+ use_len = mtd->oobavail;
+ use_len_max = mtd->oobavail;
vary_offset = 0;
/* Fourth test: try to write off end of device */
@@ -501,7 +501,7 @@ static int __init mtd_oobtest_init(void)
ops.retlen = 0;
ops.ooblen = 1;
ops.oobretlen = 0;
- ops.ooboffs = mtd->ecclayout->oobavail;
+ ops.ooboffs = mtd->oobavail;
ops.datbuf = NULL;
ops.oobbuf = writebuf;
pr_info("attempting to start write past end of OOB\n");
@@ -521,7 +521,7 @@ static int __init mtd_oobtest_init(void)
ops.retlen = 0;
ops.ooblen = 1;
ops.oobretlen = 0;
- ops.ooboffs = mtd->ecclayout->oobavail;
+ ops.ooboffs = mtd->oobavail;
ops.datbuf = NULL;
ops.oobbuf = readbuf;
pr_info("attempting to start read past end of OOB\n");
@@ -543,7 +543,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail + 1;
+ ops.ooblen = mtd->oobavail + 1;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
@@ -563,7 +563,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail + 1;
+ ops.ooblen = mtd->oobavail + 1;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
@@ -587,7 +587,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail;
+ ops.ooblen = mtd->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 1;
ops.datbuf = NULL;
@@ -607,7 +607,7 @@ static int __init mtd_oobtest_init(void)
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail;
+ ops.ooblen = mtd->oobavail;
ops.oobretlen = 0;
ops.ooboffs = 1;
ops.datbuf = NULL;
@@ -638,7 +638,7 @@ static int __init mtd_oobtest_init(void)
for (i = 0; i < ebcnt - 1; ++i) {
int cnt = 2;
int pg;
- size_t sz = mtd->ecclayout->oobavail;
+ size_t sz = mtd->oobavail;
if (bbt[i] || bbt[i + 1])
continue;
addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
@@ -673,13 +673,12 @@ static int __init mtd_oobtest_init(void)
for (i = 0; i < ebcnt - 1; ++i) {
if (bbt[i] || bbt[i + 1])
continue;
- prandom_bytes_state(&rnd_state, writebuf,
- mtd->ecclayout->oobavail * 2);
+ prandom_bytes_state(&rnd_state, writebuf, mtd->oobavail * 2);
addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
- ops.ooblen = mtd->ecclayout->oobavail * 2;
+ ops.ooblen = mtd->oobavail * 2;
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
@@ -688,7 +687,7 @@ static int __init mtd_oobtest_init(void)
if (err)
goto out;
if (memcmpshow(addr, readbuf, writebuf,
- mtd->ecclayout->oobavail * 2)) {
+ mtd->oobavail * 2)) {
pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c
index 9d47c5db24a6..163f21a1298d 100644
--- a/drivers/staging/mt29f_spinand/mt29f_spinand.c
+++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c
@@ -49,7 +49,6 @@ static struct nand_ecclayout spinand_oob_64 = {
17, 18, 19, 20, 21, 22,
33, 34, 35, 36, 37, 38,
49, 50, 51, 52, 53, 54, },
- .oobavail = 32,
.oobfree = {
{.offset = 8,
.length = 8},
diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.h b/drivers/staging/mt29f_spinand/mt29f_spinand.h
index ae62975cf44a..457dc7ffdaf1 100644
--- a/drivers/staging/mt29f_spinand/mt29f_spinand.h
+++ b/drivers/staging/mt29f_spinand/mt29f_spinand.h
@@ -78,7 +78,6 @@
#define BL_ALL_UNLOCKED 0
struct spinand_info {
- struct nand_ecclayout *ecclayout;
struct spi_device *spi;
void *priv;
};
diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c
index 95d5880a63ee..7e553f286775 100644
--- a/fs/jffs2/gc.c
+++ b/fs/jffs2/gc.c
@@ -134,37 +134,59 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
if (mutex_lock_interruptible(&c->alloc_sem))
return -EINTR;
+
for (;;) {
+ /* We can't start doing GC until we've finished checking
+ the node CRCs etc. */
+ int bucket, want_ino;
+
spin_lock(&c->erase_completion_lock);
if (!c->unchecked_size)
break;
-
- /* We can't start doing GC yet. We haven't finished checking
- the node CRCs etc. Do it now. */
-
- /* checked_ino is protected by the alloc_sem */
- if (c->checked_ino > c->highest_ino && xattr) {
- pr_crit("Checked all inodes but still 0x%x bytes of unchecked space?\n",
- c->unchecked_size);
- jffs2_dbg_dump_block_lists_nolock(c);
- spin_unlock(&c->erase_completion_lock);
- mutex_unlock(&c->alloc_sem);
- return -ENOSPC;
- }
-
spin_unlock(&c->erase_completion_lock);
if (!xattr)
xattr = jffs2_verify_xattr(c);
spin_lock(&c->inocache_lock);
+ /* Instead of doing the inodes in numeric order, doing a lookup
+ * in the hash for each possible number, just walk the hash
+ * buckets of *existing* inodes. This means that we process
+ * them out-of-order, but it can be a lot faster if there's
+ * a sparse inode# space. Which there often is. */
+ want_ino = c->check_ino;
+ for (bucket = c->check_ino % c->inocache_hashsize ; bucket < c->inocache_hashsize; bucket++) {
+ for (ic = c->inocache_list[bucket]; ic; ic = ic->next) {
+ if (ic->ino < want_ino)
+ continue;
+
+ if (ic->state != INO_STATE_CHECKEDABSENT &&
+ ic->state != INO_STATE_PRESENT)
+ goto got_next; /* with inocache_lock held */
+
+ jffs2_dbg(1, "Skipping ino #%u already checked\n",
+ ic->ino);
+ }
+ want_ino = 0;
+ }
- ic = jffs2_get_ino_cache(c, c->checked_ino++);
+ /* Point c->check_ino past the end of the last bucket. */
+ c->check_ino = ((c->highest_ino + c->inocache_hashsize + 1) &
+ ~c->inocache_hashsize) - 1;
- if (!ic) {
- spin_unlock(&c->inocache_lock);
- continue;
- }
+ spin_unlock(&c->inocache_lock);
+
+ pr_crit("Checked all inodes but still 0x%x bytes of unchecked space?\n",
+ c->unchecked_size);
+ jffs2_dbg_dump_block_lists_nolock(c);
+ mutex_unlock(&c->alloc_sem);
+ return -ENOSPC;
+
+ got_next:
+ /* For next time round the loop, we want c->checked_ino to indicate
+ * the *next* one we want to check. And since we're walking the
+ * buckets rather than doing it sequentially, it's: */
+ c->check_ino = ic->ino + c->inocache_hashsize;
if (!ic->pino_nlink) {
jffs2_dbg(1, "Skipping check of ino #%d with nlink/pino zero\n",
@@ -176,8 +198,6 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
switch(ic->state) {
case INO_STATE_CHECKEDABSENT:
case INO_STATE_PRESENT:
- jffs2_dbg(1, "Skipping ino #%u already checked\n",
- ic->ino);
spin_unlock(&c->inocache_lock);
continue;
@@ -196,7 +216,7 @@ int jffs2_garbage_collect_pass(struct jffs2_sb_info *c)
ic->ino);
/* We need to come back again for the _same_ inode. We've
made no progress in this case, but that should be OK */
- c->checked_ino--;
+ c->check_ino = ic->ino;
mutex_unlock(&c->alloc_sem);
sleep_on_spinunlock(&c->inocache_wq, &c->inocache_lock);
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
index 046fee8b6e9b..778275f48a87 100644
--- a/fs/jffs2/jffs2_fs_sb.h
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -49,7 +49,7 @@ struct jffs2_sb_info {
struct mtd_info *mtd;
uint32_t highest_ino;
- uint32_t checked_ino;
+ uint32_t check_ino; /* *NEXT* inode to be checked */
unsigned int flags;
diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c
index b6bd4affd9ad..cda0774c2c9c 100644
--- a/fs/jffs2/nodemgmt.c
+++ b/fs/jffs2/nodemgmt.c
@@ -846,8 +846,8 @@ int jffs2_thread_should_wake(struct jffs2_sb_info *c)
return 1;
if (c->unchecked_size) {
- jffs2_dbg(1, "jffs2_thread_should_wake(): unchecked_size %d, checked_ino #%d\n",
- c->unchecked_size, c->checked_ino);
+ jffs2_dbg(1, "jffs2_thread_should_wake(): unchecked_size %d, check_ino #%d\n",
+ c->unchecked_size, c->check_ino);
return 1;
}
diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
index 5a3da3f52908..b25d28a21212 100644
--- a/fs/jffs2/wbuf.c
+++ b/fs/jffs2/wbuf.c
@@ -1183,22 +1183,20 @@ void jffs2_dirty_trigger(struct jffs2_sb_info *c)
int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
{
- struct nand_ecclayout *oinfo = c->mtd->ecclayout;
-
if (!c->mtd->oobsize)
return 0;
/* Cleanmarker is out-of-band, so inline size zero */
c->cleanmarker_size = 0;
- if (!oinfo || oinfo->oobavail == 0) {
+ if (c->mtd->oobavail == 0) {
pr_err("inconsistent device description\n");
return -EINVAL;
}
jffs2_dbg(1, "using OOB on NAND\n");
- c->oobavail = oinfo->oobavail;
+ c->oobavail = c->mtd->oobavail;
/* Initialise write buffer */
init_rwsem(&c->wbuf_sem);
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 36bb6a503f19..3bf8f954b642 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -166,7 +166,6 @@ struct bbm_info {
};
/* OneNAND BBT interface */
-extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
extern int onenand_default_bbt(struct mtd_info *mtd);
#endif /* __LINUX_MTD_BBM_H */
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
index 02cd5f9b79b8..8255118be0f0 100644
--- a/include/linux/mtd/inftl.h
+++ b/include/linux/mtd/inftl.h
@@ -44,7 +44,6 @@ struct INFTLrecord {
unsigned int nb_blocks; /* number of physical blocks */
unsigned int nb_boot_blocks; /* number of blocks used by the bios */
struct erase_info instr;
- struct nand_ecclayout oobinfo;
};
int INFTL_mount(struct INFTLrecord *s);
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index 58f3ba709ade..5e0eb7ccabd4 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -240,8 +240,11 @@ struct map_info {
If there is no cache to care about this can be set to NULL. */
void (*inval_cache)(struct map_info *, unsigned long, ssize_t);
- /* set_vpp() must handle being reentered -- enable, enable, disable
- must leave it enabled. */
+ /* This will be called with 1 as parameter when the first map user
+ * needs VPP, and called with 0 when the last user exits. The map
+ * core maintains a reference counter, and assumes that VPP is a
+ * global resource applying to all mapped flash chips on the system.
+ */
void (*set_vpp)(struct map_info *, int);
unsigned long pfow_base;
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index cc84923011c0..771272187316 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -105,7 +105,6 @@ struct mtd_oob_ops {
struct nand_ecclayout {
__u32 eccbytes;
__u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
- __u32 oobavail;
struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
};
@@ -265,6 +264,11 @@ static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
return mtd->dev.of_node;
}
+static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
+{
+ return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
+}
+
int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
void **virt, resource_size_t *phys);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index bdd68e22b5a5..56574ba36555 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -168,6 +168,12 @@ typedef enum {
/* Device supports subpage reads */
#define NAND_SUBPAGE_READ 0x00001000
+/*
+ * Some MLC NANDs need data scrambling to limit bitflips caused by repeated
+ * patterns.
+ */
+#define NAND_NEED_SCRAMBLING 0x00002000
+
/* Options valid for Samsung large page devices */
#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
@@ -666,7 +672,7 @@ struct nand_chip {
void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
void (*select_chip)(struct mtd_info *mtd, int chip);
- int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs);
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
int (*dev_ready)(struct mtd_info *mtd);
@@ -896,7 +902,6 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
* @chip_delay: R/B delay value in us
* @options: Option flags, e.g. 16bit buswidth
* @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
- * @ecclayout: ECC layout info structure
* @part_probe_types: NULL-terminated array of probe types
*/
struct platform_nand_chip {
@@ -904,7 +909,6 @@ struct platform_nand_chip {
int chip_offset;
int nr_partitions;
struct mtd_partition *partitions;
- struct nand_ecclayout *ecclayout;
int chip_delay;
unsigned int options;
unsigned int bbt_options;
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
index fb0bc3420a10..98f20ef05d60 100644
--- a/include/linux/mtd/nand_bch.h
+++ b/include/linux/mtd/nand_bch.h
@@ -32,9 +32,7 @@ int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc,
/*
* Initialize BCH encoder/decoder
*/
-struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
- unsigned int eccbytes, struct nand_ecclayout **ecclayout);
+struct nand_bch_control *nand_bch_init(struct mtd_info *mtd);
/*
* Release BCH encoder/decoder resources
*/
@@ -58,9 +56,7 @@ nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
return -ENOTSUPP;
}
-static inline struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
- unsigned int eccbytes, struct nand_ecclayout **ecclayout)
+static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
{
return NULL;
}
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
index b059629e22bc..044daa02b8ff 100644
--- a/include/linux/mtd/nftl.h
+++ b/include/linux/mtd/nftl.h
@@ -50,7 +50,6 @@ struct NFTLrecord {
unsigned int nb_blocks; /* number of physical blocks */
unsigned int nb_boot_blocks; /* number of blocks used by the bios */
struct erase_info instr;
- struct nand_ecclayout oobinfo;
};
int NFTL_mount(struct NFTLrecord *s);
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 62356d50815b..3c36113a88e1 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -85,6 +85,7 @@
#define SR_BP0 BIT(2) /* Block protect 0 */
#define SR_BP1 BIT(3) /* Block protect 1 */
#define SR_BP2 BIT(4) /* Block protect 2 */
+#define SR_TB BIT(5) /* Top/Bottom protect */
#define SR_SRWD BIT(7) /* SR write protect */
#define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */
@@ -116,6 +117,7 @@ enum spi_nor_ops {
enum spi_nor_option_flags {
SNOR_F_USE_FSR = BIT(0),
+ SNOR_F_HAS_SR_TB = BIT(1),
};
/**
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index 36bb92172f47..c55e42ee57fa 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -40,7 +40,6 @@ struct s3c2410_nand_set {
char *name;
int *nr_map;
struct mtd_partition *partitions;
- struct nand_ecclayout *ecc_layout;
};
struct s3c2410_platform_nand {