summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-pxa/em-x270.c4
-rw-r--r--arch/arm/mach-pxa/gumstix.c3
-rw-r--r--arch/arm/mach-pxa/mfp-pxa2xx.c12
-rw-r--r--arch/arm/mach-pxa/poodle.c2
-rw-r--r--arch/arm/mach-pxa/pxa3xx-ulpi.c6
-rw-r--r--arch/arm/mach-pxa/raumfeld.c26
6 files changed, 25 insertions, 28 deletions
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 6915a9f6b3a3..51531ecffca8 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -378,7 +378,7 @@ static void __init em_x270_init_nand(void)
err = gpio_request(GPIO11_NAND_CS, "NAND CS");
if (err) {
- pr_warning("EM-X270: failed to request NAND CS gpio\n");
+ pr_warn("EM-X270: failed to request NAND CS gpio\n");
return;
}
@@ -386,7 +386,7 @@ static void __init em_x270_init_nand(void)
err = gpio_request(nand_rb, "NAND R/B");
if (err) {
- pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+ pr_warn("EM-X270: failed to request NAND R/B gpio\n");
gpio_free(GPIO11_NAND_CS);
return;
}
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 00b92dad7b81..f6c76a3ee3b2 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -140,8 +140,7 @@ static void gumstix_setup_bt_clock(void)
int timeout = 500;
if (!(OSCC & OSCC_OOK))
- pr_warning("32kHz clock was not on. Bootloader may need to "
- "be updated\n");
+ pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
else
return;
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index ef0426a159d4..666b78972c40 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -93,8 +93,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
break;
default:
/* warning and fall through, treat as MFP_LPM_DEFAULT */
- pr_warning("%s: GPIO%d: unsupported low power mode\n",
- __func__, gpio);
+ pr_warn("%s: GPIO%d: unsupported low power mode\n",
+ __func__, gpio);
break;
}
@@ -107,14 +107,12 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
* configurations of those pins not able to wakeup
*/
if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
- pr_warning("%s: GPIO%d unable to wakeup\n",
- __func__, gpio);
+ pr_warn("%s: GPIO%d unable to wakeup\n", __func__, gpio);
return -EINVAL;
}
if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
- pr_warning("%s: output GPIO%d unable to wakeup\n",
- __func__, gpio);
+ pr_warn("%s: output GPIO%d unable to wakeup\n", __func__, gpio);
return -EINVAL;
}
@@ -126,7 +124,7 @@ static inline int __mfp_validate(int mfp)
int gpio = mfp_to_gpio(mfp);
if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
- pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+ pr_warn("%s: GPIO%d is invalid pin\n", __func__, gpio);
return -1;
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 131991629116..29019beae591 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -446,7 +446,7 @@ static void __init poodle_init(void)
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret)
- pr_warning("poodle: Unable to register LoCoMo device\n");
+ pr_warn("poodle: Unable to register LoCoMo device\n");
pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
pxa_set_udc_info(&udc_info);
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index e329ccefd364..614003e8b081 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -74,7 +74,7 @@ static int pxa310_ulpi_poll(void)
cpu_relax();
}
- pr_warning("%s: ULPI access timed out!\n", __func__);
+ pr_warn("%s: ULPI access timed out!\n", __func__);
return -ETIMEDOUT;
}
@@ -84,7 +84,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
int err;
if (pxa310_ulpi_get_phymode() != SYNCH) {
- pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+ pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
return -EBUSY;
}
@@ -101,7 +101,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
{
if (pxa310_ulpi_get_phymode() != SYNCH) {
- pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+ pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
return -EBUSY;
}
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 8386dc30b3e4..a762b23ac830 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -521,7 +521,7 @@ static void __init raumfeld_w1_init(void)
"W1 external pullup enable");
if (ret < 0)
- pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+ pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
else
gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
@@ -600,7 +600,7 @@ static void __init raumfeld_lcd_init(void)
ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
if (ret < 0)
- pr_warning("Unable to request GPIO_TFT_VA_EN\n");
+ pr_warn("Unable to request GPIO_TFT_VA_EN\n");
else
gpio_direction_output(GPIO_TFT_VA_EN, 1);
@@ -608,7 +608,7 @@ static void __init raumfeld_lcd_init(void)
ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
if (ret < 0)
- pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
+ pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
else
gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
@@ -814,17 +814,17 @@ static void __init raumfeld_power_init(void)
/* Set PEN2 high to enable maximum charge current */
ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
if (ret < 0)
- pr_warning("Unable to request GPIO_CHRG_PEN2\n");
+ pr_warn("Unable to request GPIO_CHRG_PEN2\n");
else
gpio_direction_output(GPIO_CHRG_PEN2, 1);
ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
if (ret < 0)
- pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
+ pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
if (ret < 0)
- pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
+ pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
else
gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
@@ -976,19 +976,19 @@ static void __init raumfeld_audio_init(void)
ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
if (ret < 0)
- pr_warning("unable to request GPIO_CODEC_RESET\n");
+ pr_warn("unable to request GPIO_CODEC_RESET\n");
else
gpio_direction_output(GPIO_CODEC_RESET, 1);
ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
if (ret < 0)
- pr_warning("unable to request GPIO_SPDIF_RESET\n");
+ pr_warn("unable to request GPIO_SPDIF_RESET\n");
else
gpio_direction_output(GPIO_SPDIF_RESET, 1);
ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
if (ret < 0)
- pr_warning("unable to request GPIO_MCLK_RESET\n");
+ pr_warn("unable to request GPIO_MCLK_RESET\n");
else
gpio_direction_output(GPIO_MCLK_RESET, 1);
@@ -1019,20 +1019,20 @@ static void __init raumfeld_common_init(void)
ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
if (ret < 0)
- pr_warning("Unable to request GPIO_W2W_RESET\n");
+ pr_warn("Unable to request GPIO_W2W_RESET\n");
else
gpio_direction_output(GPIO_W2W_RESET, 0);
ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
if (ret < 0)
- pr_warning("Unable to request GPIO_W2W_PDN\n");
+ pr_warn("Unable to request GPIO_W2W_PDN\n");
else
gpio_direction_output(GPIO_W2W_PDN, 0);
/* this can be used to switch off the device */
ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
if (ret < 0)
- pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+ pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
else
gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
@@ -1051,7 +1051,7 @@ static void __init raumfeld_controller_init(void)
ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
if (ret < 0)
- pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
+ pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
else
gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 00:51:02 +0000