summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt51
-rw-r--r--Documentation/devicetree/bindings/mfd/max77686.txt6
-rw-r--r--Documentation/devicetree/bindings/mfd/max77693.txt21
-rw-r--r--Documentation/devicetree/bindings/mfd/s2mps11.txt22
-rw-r--r--drivers/clk/clk-s2mps11.c24
-rw-r--r--drivers/gpio/Kconfig12
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-dln2.c553
-rw-r--r--drivers/gpio/gpio-tc3589x.c2
-rw-r--r--drivers/hid/hid-sensor-hub.c8
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-dln2.c262
-rw-r--r--drivers/iio/adc/Kconfig8
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/axp288_adc.c261
-rw-r--r--drivers/mfd/Kconfig25
-rw-r--r--drivers/mfd/Makefile4
-rw-r--r--drivers/mfd/ab8500-sysctrl.c57
-rw-r--r--drivers/mfd/arizona-spi.c2
-rw-r--r--drivers/mfd/atmel-hlcdc.c122
-rw-r--r--drivers/mfd/axp20x.c361
-rw-r--r--drivers/mfd/da9063-core.c4
-rw-r--r--drivers/mfd/db8500-prcmu.c22
-rw-r--r--drivers/mfd/dln2.c781
-rw-r--r--drivers/mfd/lpc_sch.c6
-rw-r--r--drivers/mfd/max14577.c2
-rw-r--r--drivers/mfd/max77693.c31
-rw-r--r--drivers/mfd/mfd-core.c8
-rw-r--r--drivers/mfd/rts5227.c6
-rw-r--r--drivers/mfd/rts5249.c4
-rw-r--r--drivers/mfd/rtsx_gops.c37
-rw-r--r--drivers/mfd/rtsx_pcr.h3
-rw-r--r--drivers/mfd/rtsx_usb.c4
-rw-r--r--drivers/mfd/sec-core.c39
-rw-r--r--drivers/mfd/sec-irq.c23
-rw-r--r--drivers/mfd/syscon.c96
-rw-r--r--drivers/mfd/t7l66xb.c14
-rw-r--r--drivers/mfd/tc3589x.c9
-rw-r--r--drivers/mfd/tc6387xb.c10
-rw-r--r--drivers/mfd/tc6393xb.c23
-rw-r--r--drivers/mfd/tps65090.c62
-rw-r--r--drivers/mfd/tps65217.c2
-rw-r--r--drivers/mfd/twl4030-power.c3
-rw-r--r--drivers/mfd/viperboard.c5
-rw-r--r--drivers/mfd/wm5102-tables.c6
-rw-r--r--drivers/mfd/wm5110-tables.c20
-rw-r--r--drivers/mfd/wm8350-core.c2
-rw-r--r--drivers/mfd/wm8997-tables.c6
-rw-r--r--drivers/regulator/Kconfig10
-rw-r--r--drivers/regulator/s2mps11.c102
-rw-r--r--include/linux/mfd/abx500/ab8500-sysctrl.h1
-rw-r--r--include/linux/mfd/arizona/registers.h50
-rw-r--r--include/linux/mfd/atmel-hlcdc.h85
-rw-r--r--include/linux/mfd/axp20x.h59
-rw-r--r--include/linux/mfd/core.h7
-rw-r--r--include/linux/mfd/dln2.h103
-rw-r--r--include/linux/mfd/max77693-private.h1
-rw-r--r--include/linux/mfd/rtsx_pci.h37
-rw-r--r--include/linux/mfd/samsung/core.h2
-rw-r--r--include/linux/mfd/samsung/s2mps13.h186
-rw-r--r--include/linux/mfd/tc3589x.h8
-rw-r--r--include/linux/of.h11
63 files changed, 3431 insertions, 273 deletions
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
new file mode 100644
index 000000000000..f64de95a8e8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -0,0 +1,51 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
+
+Required properties:
+ - compatible: value should be one of the following:
+ "atmel,sama5d3-hlcdc"
+ - reg: base address and size of the HLCDC device registers.
+ - clock-names: the name of the 3 clocks requested by the HLCDC device.
+ Should contain "periph_clk", "sys_clk" and "slow_clk".
+ - clocks: should contain the 3 clocks requested by the HLCDC device.
+ - interrupts: should contain the description of the HLCDC interrupt line
+
+The HLCDC IP exposes two subdevices:
+ - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
+ - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
+
+Example:
+
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index 678f3cf0b8f0..75fdfaf41831 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -34,6 +34,12 @@ to get matched with their hardware counterparts as follow:
-BUCKn : for BUCKs, where n can lie in range 1 to 9.
example: BUCK1, BUCK5, BUCK9.
+ Regulators which can be turned off during system suspend:
+ -LDOn : 2, 6-8, 10-12, 14-16,
+ -BUCKn : 1-4.
+ Use standard regulator bindings for it ('regulator-off-in-suspend').
+
+
Example:
max77686@09 {
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
index 11921cc417bf..01e9f30fe678 100644
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ b/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -27,6 +27,20 @@ Optional properties:
[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
+ users with tactile feedback. PWM period and duty-cycle are varied in
+ order to provide the approprite level of feedback.
+
+ Required properties:
+ - compatible : Must be "maxim,max77693-hpatic"
+ - haptic-supply : power supply for the haptic motor
+ [*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+ - pwms : phandle to the physical PWM(Pulse Width Modulation) device.
+ PWM properties should be named "pwms". And number of cell is different
+ for each pwm device.
+ To get more informations, please refer to documentaion.
+ [*] refer Documentation/devicetree/bindings/pwm/pwm.txt
+
Example:
max77693@66 {
compatible = "maxim,max77693";
@@ -52,4 +66,11 @@ Example:
regulator-boot-on;
};
};
+
+ haptic {
+ compatible = "maxim,max77693-haptic";
+ haptic-supply = <&haptic_supply>;
+ pwms = <&pwm 0 40000 0>;
+ pwm-names = "haptic";
+ };
};
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 0e4026a6cbbf..57a045016fca 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
-* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
- or "samsung,s2mpu02-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
+ or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
@@ -17,8 +17,8 @@ Optional properties:
- interrupts: Interrupt specifiers for interrupt sources.
Optional nodes:
-- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
- outputs, so to register these as clocks with common clock framework
+- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+ KHz outputs, so to register these as clocks with common clock framework
instantiate a sub-node named "clocks". It uses the common clock binding
documented in :
[Documentation/devicetree/bindings/clock/clock-bindings.txt]
@@ -30,12 +30,12 @@ Optional nodes:
the clock which they consume.
Clock ID Devices
----------------------------------------------------------
- 32KhzAP 0 S2MPS11, S2MPS14, S5M8767
- 32KhzCP 1 S2MPS11, S5M8767
- 32KhzBT 2 S2MPS11, S2MPS14, S5M8767
+ 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767
+ 32KhzCP 1 S2MPS11, S2MPS13, S5M8767
+ 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767
- - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
- "samsung,s5m8767-clk"
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+ "samsung,s2mps14-clk", "samsung,s5m8767-clk"
- regulators: The regulators of s2mps11 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -81,12 +81,14 @@ as per the datasheet of s2mps11.
- LDOn
- valid values for n are:
- S2MPS11: 1 to 38
+ - S2MPS13: 1 to 40
- S2MPS14: 1 to 25
- S2MPU02: 1 to 28
- Example: LDO1, LDO2, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
+ - S2MPS13: 1 to 10
- S2MPS14: 1 to 5
- S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9
diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index b7797fb12e12..7bb13af8e214 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -23,6 +23,7 @@
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/mfd/samsung/core.h>
@@ -120,6 +121,24 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
},
};
+static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
+ [S2MPS11_CLK_AP] = {
+ .name = "s2mps13_ap",
+ .ops = &s2mps11_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [S2MPS11_CLK_CP] = {
+ .name = "s2mps13_cp",
+ .ops = &s2mps11_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [S2MPS11_CLK_BT] = {
+ .name = "s2mps13_bt",
+ .ops = &s2mps11_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+};
+
static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
[S2MPS11_CLK_AP] = {
.name = "s2mps14_ap",
@@ -184,6 +203,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
s2mps11_reg = S2MPS11_REG_RTC_CTRL;
clks_init = s2mps11_clks_init;
break;
+ case S2MPS13X:
+ s2mps11_reg = S2MPS13_REG_RTCCTRL;
+ clks_init = s2mps13_clks_init;
+ break;
case S2MPS14X:
s2mps11_reg = S2MPS14_REG_RTCCTRL;
clks_init = s2mps14_clks_init;
@@ -279,6 +302,7 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
static const struct platform_device_id s2mps11_clk_id[] = {
{ "s2mps11-clk", S2MPS11X},
+ { "s2mps13-clk", S2MPS13X},
{ "s2mps14-clk", S2MPS14X},
{ "s5m8767-clk", S5M8767X},
{ },
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0959ca9b6b27..23dfd5f59b39 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -905,4 +905,16 @@ config GPIO_VIPERBOARD
River Tech's viperboard.h for detailed meaning
of the module parameters.
+config GPIO_DLN2
+ tristate "Diolan DLN2 GPIO support"
+ depends on MFD_DLN2
+ select GPIOLIB_IRQCHIP
+
+ help
+ Select this option to enable GPIO driver for the Diolan DLN2
+ board.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-dln2.
+
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index e5d346cf3b6e..e60677b8ccb4 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
+obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c
new file mode 100644
index 000000000000..978b51eae2ec
--- /dev/null
+++ b/drivers/gpio/gpio-dln2.c
@@ -0,0 +1,553 @@
+/*
+ * Driver for the Diolan DLN-2 USB-GPIO adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/dln2.h>
+
+#define DLN2_GPIO_ID 0x01
+
+#define DLN2_GPIO_GET_PIN_COUNT DLN2_CMD(0x01, DLN2_GPIO_ID)
+#define DLN2_GPIO_SET_DEBOUNCE DLN2_CMD(0x04, DLN2_GPIO_ID)
+#define DLN2_GPIO_GET_DEBOUNCE DLN2_CMD(0x05, DLN2_GPIO_ID)
+#define DLN2_GPIO_PORT_GET_VAL DLN2_CMD(0x06, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_VAL DLN2_CMD(0x0B, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_OUT_VAL DLN2_CMD(0x0C, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_OUT_VAL DLN2_CMD(0x0D, DLN2_GPIO_ID)
+#define DLN2_GPIO_CONDITION_MET_EV DLN2_CMD(0x0F, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_ENABLE DLN2_CMD(0x10, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_DISABLE DLN2_CMD(0x11, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_DIRECTION DLN2_CMD(0x13, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_DIRECTION DLN2_CMD(0x14, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_EVENT_CFG DLN2_CMD(0x1E, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_EVENT_CFG DLN2_CMD(0x1F, DLN2_GPIO_ID)
+
+#define DLN2_GPIO_EVENT_NONE 0
+#define DLN2_GPIO_EVENT_CHANGE 1
+#define DLN2_GPIO_EVENT_LVL_HIGH 2
+#define DLN2_GPIO_EVENT_LVL_LOW 3
+#define DLN2_GPIO_EVENT_CHANGE_RISING 0x11
+#define DLN2_GPIO_EVENT_CHANGE_FALLING 0x21
+#define DLN2_GPIO_EVENT_MASK 0x0F
+
+#define DLN2_GPIO_MAX_PINS 32
+
+struct dln2_irq_work {
+ struct work_struct work;
+ struct dln2_gpio *dln2;
+ int pin;
+ int type;
+};
+
+struct dln2_gpio {
+ struct platform_device *pdev;
+ struct gpio_chip gpio;
+
+ /*
+ * Cache pin direction to save us one transfer, since the hardware has
+ * separate commands to read the in and out values.
+ */
+ DECLARE_BITMAP(output_enabled, DLN2_GPIO_MAX_PINS);
+
+ DECLARE_BITMAP(irqs_masked, DLN2_GPIO_MAX_PINS);
+ DECLARE_BITMAP(irqs_enabled, DLN2_GPIO_MAX_PINS);
+ DECLARE_BITMAP(irqs_pending, DLN2_GPIO_MAX_PINS);
+ struct dln2_irq_work *irq_work;
+};
+
+struct dln2_gpio_pin {
+ __le16 pin;
+};
+
+struct dln2_gpio_pin_val {
+ __le16 pin __packed;
+ u8 value;
+};
+
+static int dln2_gpio_get_pin_count(struct platform_device *pdev)
+{
+ int ret;
+ __le16 count;
+ int len = sizeof(count);
+
+ ret = dln2_transfer_rx(pdev, DLN2_GPIO_GET_PIN_COUNT, &count, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(count))
+ return -EPROTO;
+
+ return le16_to_cpu(count);
+}
+
+static int dln2_gpio_pin_cmd(struct dln2_gpio *dln2, int cmd, unsigned pin)
+{
+ struct dln2_gpio_pin req = {
+ .pin = cpu_to_le16(pin),
+ };
+
+ return dln2_transfer_tx(dln2->pdev, cmd, &req, sizeof(req));
+}
+
+static int dln2_gpio_pin_val(struct dln2_gpio *dln2, int cmd, unsigned int pin)
+{
+ int ret;
+ struct dln2_gpio_pin req = {
+ .pin = cpu_to_le16(pin),
+ };
+ struct dln2_gpio_pin_val rsp;
+ int len = sizeof(rsp);
+
+ ret = dln2_transfer(dln2->pdev, cmd, &req, sizeof(req), &rsp, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(rsp) || req.pin != rsp.pin)
+ return -EPROTO;
+
+ return rsp.value;
+}
+
+static int dln2_gpio_pin_get_in_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+ int ret;
+
+ ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_VAL, pin);
+ if (ret < 0)
+ return ret;
+ return !!ret;
+}
+
+static int dln2_gpio_pin_get_out_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+ int ret;
+
+ ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_OUT_VAL, pin);
+ if (ret < 0)
+ return ret;
+ return !!ret;
+}
+
+static void dln2_gpio_pin_set_out_val(struct dln2_gpio *dln2,
+ unsigned int pin, int value)
+{
+ struct dln2_gpio_pin_val req = {
+ .pin = cpu_to_le16(pin),
+ .value = value,
+ };
+
+ dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_OUT_VAL, &req,
+ sizeof(req));
+}
+
+#define DLN2_GPIO_DIRECTION_IN 0
+#define DLN2_GPIO_DIRECTION_OUT 1
+
+static int dln2_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ struct dln2_gpio_pin req = {
+ .pin = cpu_to_le16(offset),
+ };
+ struct dln2_gpio_pin_val rsp;
+ int len = sizeof(rsp);
+ int ret;
+
+ ret = dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_ENABLE, offset);
+ if (ret < 0)
+ return ret;
+
+ /* cache the pin direction */
+ ret = dln2_transfer(dln2->pdev, DLN2_GPIO_PIN_GET_DIRECTION,
+ &req, sizeof(req), &rsp, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(rsp) || req.pin != rsp.pin) {
+ ret = -EPROTO;
+ goto out_disable;
+ }
+
+ switch (rsp.value) {
+ case DLN2_GPIO_DIRECTION_IN:
+ clear_bit(offset, dln2->output_enabled);
+ return 0;
+ case DLN2_GPIO_DIRECTION_OUT:
+ set_bit(offset, dln2->output_enabled);
+ return 0;
+ default:
+ ret = -EPROTO;
+ goto out_disable;
+ }
+
+out_disable:
+ dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+ return ret;
+}
+
+static void dln2_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+ dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+}
+
+static int dln2_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+ if (test_bit(offset, dln2->output_enabled))
+ return GPIOF_DIR_OUT;
+
+ return GPIOF_DIR_IN;
+}
+
+static int dln2_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ int dir;
+
+ dir = dln2_gpio_get_direction(chip, offset);
+ if (dir < 0)
+ return dir;
+
+ if (dir == GPIOF_DIR_IN)
+ return dln2_gpio_pin_get_in_val(dln2, offset);
+
+ return dln2_gpio_pin_get_out_val(dln2, offset);
+}
+
+static void dln2_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+ dln2_gpio_pin_set_out_val(dln2, offset, value);
+}
+
+static int dln2_gpio_set_direction(struct gpio_chip *chip, unsigned offset,
+ unsigned dir)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ struct dln2_gpio_pin_val req = {
+ .pin = cpu_to_le16(offset),
+ .value = dir,
+ };
+ int ret;
+
+ ret = dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_DIRECTION,
+ &req, sizeof(req));
+ if (ret < 0)
+ return ret;
+
+ if (dir == DLN2_GPIO_DIRECTION_OUT)
+ set_bit(offset, dln2->output_enabled);
+ else
+ clear_bit(offset, dln2->output_enabled);
+
+ return ret;
+}
+
+static int dln2_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_IN);
+}
+
+static int dln2_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_OUT);
+}
+
+static int dln2_gpio_set_debounce(struct gpio_chip *chip, unsigned offset,
+ unsigned debounce)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ __le32 duration = cpu_to_le32(debounce);
+
+ return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_SET_DEBOUNCE,
+ &duration, sizeof(duration));
+}
+
+static int dln2_gpio_set_event_cfg(struct dln2_gpio *dln2, unsigned pin,
+ unsigned type, unsigned period)
+{
+ struct {
+ __le16 pin;
+ u8 type;
+ __le16 period;
+ } __packed req = {
+ .pin = cpu_to_le16(pin),
+ .type = type,
+ .period = cpu_to_le16(period),
+ };
+
+ return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_EVENT_CFG,
+ &req, sizeof(req));
+}
+
+static void dln2_irq_work(struct work_struct *w)
+{
+ struct dln2_irq_work *iw = container_of(w, struct dln2_irq_work, work);
+ struct dln2_gpio *dln2 = iw->dln2;
+ u8 type = iw->type & DLN2_GPIO_EVENT_MASK;
+
+ if (test_bit(iw->pin, dln2->irqs_enabled))
+ dln2_gpio_set_event_cfg(dln2, iw->pin, type, 0);
+ else
+ dln2_gpio_set_event_cfg(dln2, iw->pin, DLN2_GPIO_EVENT_NONE, 0);
+}
+
+static void dln2_irq_enable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ set_bit(pin, dln2->irqs_enabled);
+ schedule_work(&dln2->irq_work[pin].work);
+}
+
+static void dln2_irq_disable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ clear_bit(pin, dln2->irqs_enabled);
+ schedule_work(&dln2->irq_work[pin].work);
+}
+
+static void dln2_irq_mask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ set_bit(pin, dln2->irqs_masked);
+}
+
+static void dln2_irq_unmask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ struct device *dev = dln2->gpio.dev;
+ int pin = irqd_to_hwirq(irqd);
+
+ if (test_and_clear_bit(pin, dln2->irqs_pending)) {
+ int irq;
+
+ irq = irq_find_mapping(dln2->gpio.irqdomain, pin);
+ if (!irq) {
+ dev_err(dev, "pin %d not mapped to IRQ\n", pin);
+ return;
+ }
+
+ generic_handle_irq(irq);
+ }
+}
+
+static int dln2_irq_set_type(struct irq_data *irqd, unsigned type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_LOW;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_FALLING;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct irq_chip dln2_gpio_irqchip = {
+ .name = "dln2-irq",
+ .irq_enable = dln2_irq_enable,
+ .irq_disable = dln2_irq_disable,
+ .irq_mask = dln2_irq_mask,
+ .irq_unmask = dln2_irq_unmask,
+ .irq_set_type = dln2_irq_set_type,
+};
+
+static void dln2_gpio_event(struct platform_device *pdev, u16 echo,
+ const void *data, int len)
+{
+ int pin, irq;
+ const struct {
+ __le16 count;
+ __u8 type;
+ __le16 pin;
+ __u8 value;
+ } __packed *event = data;
+ struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
+
+ if (len < sizeof(*event)) {
+ dev_err(dln2->gpio.dev, "short event message\n");
+ return;
+ }
+
+ pin = le16_to_cpu(event->pin);
+ if (pin >= dln2->gpio.ngpio) {
+ dev_err(dln2->gpio.dev, "out of bounds pin %d\n", pin);
+ return;
+ }
+
+ irq = irq_find_mapping(dln2->gpio.irqdomain, pin);
+ if (!irq) {
+ dev_err(dln2->gpio.dev, "pin %d not mapped to IRQ\n", pin);
+ return;
+ }
+
+ if (!test_bit(pin, dln2->irqs_enabled))
+ return;
+ if (test_bit(pin, dln2->irqs_masked)) {
+ set_bit(pin, dln2->irqs_pending);
+ return;
+ }
+
+ switch (dln2->irq_work[pin].type) {
+ case DLN2_GPIO_EVENT_CHANGE_RISING:
+ if (event->value)
+ generic_handle_irq(irq);
+ break;
+ case DLN2_GPIO_EVENT_CHANGE_FALLING:
+ if (!event->value)
+ generic_handle_irq(irq);
+ break;
+ default:
+ generic_handle_irq(irq);
+ }
+}
+
+static int dln2_gpio_probe(struct platform_device *pdev)
+{
+ struct dln2_gpio *dln2;
+ struct device *dev = &pdev->dev;
+ int pins;
+ int i, ret;
+
+ pins = dln2_gpio_get_pin_count(pdev);
+ if (pins < 0) {
+ dev_err(dev, "failed to get pin count: %d\n", pins);
+ return pins;
+ }
+ if (pins > DLN2_GPIO_MAX_PINS) {
+ pins = DLN2_GPIO_MAX_PINS;
+ dev_warn(dev, "clamping pins to %d\n", DLN2_GPIO_MAX_PINS);
+ }
+
+ dln2 = devm_kzalloc(&pdev->dev, sizeof(*dln2), GFP_KERNEL);
+ if (!dln2)
+ return -ENOMEM;
+
+ dln2->irq_work = devm_kcalloc(&pdev->dev, pins,
+ sizeof(struct dln2_irq_work), GFP_KERNEL);
+ if (!dln2->irq_work)
+ return -ENOMEM;
+ for (i = 0; i < pins; i++) {
+ INIT_WORK(&dln2->irq_work[i].work, dln2_irq_work);
+ dln2->irq_work[i].pin = i;
+ dln2->irq_work[i].dln2 = dln2;
+ }
+
+ dln2->pdev = pdev;
+
+ dln2->gpio.label = "dln2";
+ dln2->gpio.dev = dev;
+ dln2->gpio.owner = THIS_MODULE;
+ dln2->gpio.base = -1;
+ dln2->gpio.ngpio = pins;
+ dln2->gpio.exported = true;
+ dln2->gpio.can_sleep = true;
+ dln2->gpio.irq_not_threaded = true;
+ dln2->gpio.set = dln2_gpio_set;
+ dln2->gpio.get = dln2_gpio_get;
+ dln2->gpio.request = dln2_gpio_request;
+ dln2->gpio.free = dln2_gpio_free;
+ dln2->gpio.get_direction = dln2_gpio_get_direction;
+ dln2->gpio.direction_input = dln2_gpio_direction_input;
+ dln2->gpio.direction_output = dln2_gpio_direction_output;
+ dln2->gpio.set_debounce = dln2_gpio_set_debounce;
+
+ platform_set_drvdata(pdev, dln2);
+
+ ret = gpiochip_add(&dln2->gpio);
+ if (ret < 0) {
+ dev_err(dev, "failed to add gpio chip: %d\n", ret);
+ goto out;
+ }
+
+ ret = gpiochip_irqchip_add(&dln2->gpio, &dln2_gpio_irqchip, 0,
+ handle_simple_irq, IRQ_TYPE_NONE);
+ if (ret < 0) {
+ dev_err(dev, "failed to add irq chip: %d\n", ret);
+ goto out_gpiochip_remove;
+ }
+
+ ret = dln2_register_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV,
+ dln2_gpio_event);
+ if (ret) {
+ dev_err(dev, "failed to register event cb: %d\n", ret);
+ goto out_gpiochip_remove;
+ }
+
+ return 0;
+
+out_gpiochip_remove:
+ gpiochip_remove(&dln2->gpio);
+out:
+ return ret;
+}
+
+static int dln2_gpio_remove(struct platform_device *pdev)
+{
+ struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
+ int i;
+
+ dln2_unregister_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV);
+ for (i = 0; i < dln2->gpio.ngpio; i++)
+ flush_work(&dln2->irq_work[i].work);
+ gpiochip_remove(&dln2->gpio);
+
+ return 0;
+}
+
+static struct platform_driver dln2_gpio_driver = {
+ .driver.name = "dln2-gpio",
+ .probe = dln2_gpio_probe,
+ .remove = dln2_gpio_remove,
+};
+
+module_platform_driver(dln2_gpio_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
+MODULE_DESCRIPTION("Driver for the Diolan DLN2 GPIO interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dln2-gpio");
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index ae0f6466eb09..abdcf58935f5 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -262,7 +262,7 @@ static int tc3589x_gpio_probe(struct platform_device *pdev)
tc3589x_gpio->chip = template_chip;
tc3589x_gpio->chip.ngpio = tc3589x->num_gpio;
tc3589x_gpio->chip.dev = &pdev->dev;
- tc3589x_gpio->chip.base = (pdata) ? pdata->gpio_base : -1;
+ tc3589x_gpio->chip.base = -1;
#ifdef CONFIG_OF_GPIO
tc3589x_gpio->chip.of_node = np;
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index e6d8e18dae97..6a58b6c723aa 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -641,9 +641,6 @@ static int sensor_hub_probe(struct hid_device *hdev,
goto err_stop_hw;
}
sd->hid_sensor_hub_client_devs[
- sd->hid_sensor_client_cnt].id =
- PLATFORM_DEVID_AUTO;
- sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].name = name;
sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].platform_data =
@@ -659,8 +656,9 @@ static int sensor_hub_probe(struct hid_device *hdev,
if (last_hsdev)
last_hsdev->end_collection_index = i;
- ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs,
- sd->hid_sensor_client_cnt, NULL, 0, NULL);
+ ret = mfd_add_hotplug_devices(&hdev->dev,
+ sd->hid_sensor_hub_client_devs,
+ sd->hid_sensor_client_cnt);
if (ret < 0)
goto err_stop_hw;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 917c3585f45b..b4d135cc2f39 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -881,6 +881,16 @@ config I2C_DIOLAN_U2C
This driver can also be built as a module. If so, the module
will be called i2c-diolan-u2c.
+config I2C_DLN2
+ tristate "Diolan DLN-2 USB I2C adapter"
+ depends on MFD_DLN2
+ help
+ If you say yes to this option, support will be included for Diolan
+ DLN2, a USB to I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-dln2.
+
config I2C_PARPORT
tristate "Parallel port adapter"
depends on PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 78d56c54ba2b..cdac7f15eab5 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
+obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o
diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c
new file mode 100644
index 000000000000..b3fb86af4cbb
--- /dev/null
+++ b/drivers/i2c/busses/i2c-dln2.c
@@ -0,0 +1,262 @@
+/*
+ * Driver for the Diolan DLN-2 USB-I2C adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Derived from:
+ * i2c-diolan-u2c.c
+ * Copyright (c) 2010-2011 Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/dln2.h>
+
+#define DLN2_I2C_MODULE_ID 0x03
+#define DLN2_I2C_CMD(cmd) DLN2_CMD(cmd, DLN2_I2C_MODULE_ID)
+
+/* I2C commands */
+#define DLN2_I2C_GET_PORT_COUNT DLN2_I2C_CMD(0x00)
+#define DLN2_I2C_ENABLE DLN2_I2C_CMD(0x01)
+#define DLN2_I2C_DISABLE DLN2_I2C_CMD(0x02)
+#define DLN2_I2C_IS_ENABLED DLN2_I2C_CMD(0x03)
+#define DLN2_I2C_WRITE DLN2_I2C_CMD(0x06)
+#define DLN2_I2C_READ DLN2_I2C_CMD(0x07)
+#define DLN2_I2C_SCAN_DEVICES DLN2_I2C_CMD(0x08)
+#define DLN2_I2C_PULLUP_ENABLE DLN2_I2C_CMD(0x09)
+#define DLN2_I2C_PULLUP_DISABLE DLN2_I2C_CMD(0x0A)
+#define DLN2_I2C_PULLUP_IS_ENABLED DLN2_I2C_CMD(0x0B)
+#define DLN2_I2C_TRANSFER DLN2_I2C_CMD(0x0C)
+#define DLN2_I2C_SET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0D)
+#define DLN2_I2C_GET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0E)
+
+#define DLN2_I2C_MAX_XFER_SIZE 256
+#define DLN2_I2C_BUF_SIZE (DLN2_I2C_MAX_XFER_SIZE + 16)
+
+struct dln2_i2c {
+ struct platform_device *pdev;
+ struct i2c_adapter adapter;
+ u8 port;
+ /*
+ * Buffer to hold the packet for read or write transfers. One is enough
+ * since we can't have multiple transfers in parallel on the i2c bus.
+ */
+ void *buf;
+};
+
+static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable)
+{
+ u16 cmd;
+ struct {
+ u8 port;
+ } tx;
+
+ tx.port = dln2->port;
+
+ if (enable)
+ cmd = DLN2_I2C_ENABLE;
+ else
+ cmd = DLN2_I2C_DISABLE;
+
+ return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx));
+}
+
+static int dln2_i2c_write(struct dln2_i2c *dln2, u8 addr,
+ u8 *data, u16 data_len)
+{
+ int ret;
+ struct {
+ u8 port;
+ u8 addr;
+ u8 mem_addr_len;
+ __le32 mem_addr;
+ __le16 buf_len;
+ u8 buf[DLN2_I2C_MAX_XFER_SIZE];
+ } __packed *tx = dln2->buf;
+ unsigned len;
+
+ BUILD_BUG_ON(sizeof(*tx) > DLN2_I2C_BUF_SIZE);
+
+ tx->port = dln2->port;
+ tx->addr = addr;
+ tx->mem_addr_len = 0;
+ tx->mem_addr = 0;
+ tx->buf_len = cpu_to_le16(data_len);
+ memcpy(tx->buf, data, data_len);
+
+ len = sizeof(*tx) + data_len - DLN2_I2C_MAX_XFER_SIZE;
+ ret = dln2_transfer_tx(dln2->pdev, DLN2_I2C_WRITE, tx, len);
+ if (ret < 0)
+ return ret;
+
+ return data_len;
+}
+
+static int dln2_i2c_read(struct dln2_i2c *dln2, u16 addr, u8 *data,
+ u16 data_len)
+{
+ int ret;
+ struct {
+ u8 port;
+ u8 addr;
+ u8 mem_addr_len;
+ __le32 mem_addr;
+ __le16 buf_len;
+ } __packed tx;
+ struct {
+ __le16 buf_len;
+ u8 buf[DLN2_I2C_MAX_XFER_SIZE];
+ } __packed *rx = dln2->buf;
+ unsigned rx_len = sizeof(*rx);
+
+ BUILD_BUG_ON(sizeof(*rx) > DLN2_I2C_BUF_SIZE);
+
+ tx.port = dln2->port;
+ tx.addr = addr;
+ tx.mem_addr_len = 0;
+ tx.mem_addr = 0;
+ tx.buf_len = cpu_to_le16(data_len);
+
+ ret = dln2_transfer(dln2->pdev, DLN2_I2C_READ, &tx, sizeof(tx),
+ rx, &rx_len);
+ if (ret < 0)
+ return ret;
+ if (rx_len < sizeof(rx->buf_len) + data_len)
+ return -EPROTO;
+ if (le16_to_cpu(rx->buf_len) != data_len)
+ return -EPROTO;
+
+ memcpy(data, rx->buf, data_len);
+
+ return data_len;
+}
+
+static int dln2_i2c_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ struct dln2_i2c *dln2 = i2c_get_adapdata(adapter);
+ struct i2c_msg *pmsg;
+ struct device *dev = &dln2->adapter.dev;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ int ret;
+
+ pmsg = &msgs[i];
+
+ if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE) {
+ dev_warn(dev, "maximum transfer size exceeded\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (pmsg->flags & I2C_M_RD) {
+ ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ if (ret < 0)
+ return ret;
+
+ pmsg->len = ret;
+ } else {
+ ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ if (ret != pmsg->len)
+ return -EPROTO;
+ }
+ }
+
+ return num;
+}
+
+static u32 dln2_i2c_func(struct i2c_adapter *a)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm dln2_i2c_usb_algorithm = {
+ .master_xfer = dln2_i2c_xfer,
+ .functionality = dln2_i2c_func,
+};
+
+static int dln2_i2c_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct dln2_i2c *dln2;
+ struct device *dev = &pdev->dev;
+ struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ dln2 = devm_kzalloc(dev, sizeof(*dln2), GFP_KERNEL);
+ if (!dln2)
+ return -ENOMEM;
+
+ dln2->buf = devm_kmalloc(dev, DLN2_I2C_BUF_SIZE, GFP_KERNEL);
+ if (!dln2->buf)
+ return -ENOMEM;
+
+ dln2->pdev = pdev;
+ dln2->port = pdata->port;
+
+ /* setup i2c adapter description */
+ dln2->adapter.owner = THIS_MODULE;
+ dln2->adapter.class = I2C_CLASS_HWMON;
+ dln2->adapter.algo = &dln2_i2c_usb_algorithm;
+ dln2->adapter.dev.parent = dev;
+ i2c_set_adapdata(&dln2->adapter, dln2);
+ snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d",
+ "dln2-i2c", dev_name(pdev->dev.parent), dln2->port);
+
+ platform_set_drvdata(pdev, dln2);
+
+ /* initialize the i2c interface */
+ ret = dln2_i2c_enable(dln2, true);
+ if (ret < 0) {
+ dev_err(dev, "failed to initialize adapter: %d\n", ret);
+ return ret;
+ }
+
+ /* and finally attach to i2c layer */
+ ret = i2c_add_adapter(&dln2->adapter);
+ if (ret < 0) {
+ dev_err(dev, "failed to add I2C adapter: %d\n", ret);
+ goto out_disable;
+ }
+
+ return 0;
+
+out_disable:
+ dln2_i2c_enable(dln2, false);
+
+ return ret;
+}
+
+static int dln2_i2c_remove(struct platform_device *pdev)
+{
+ struct dln2_i2c *dln2 = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&dln2->adapter);
+ dln2_i2c_enable(dln2, false);
+
+ return 0;
+}
+
+static struct platform_driver dln2_i2c_driver = {
+ .driver.name = "dln2-i2c",
+ .probe = dln2_i2c_probe,
+ .remove = dln2_i2c_remove,
+};
+
+module_platform_driver(dln2_i2c_driver);
+
+MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
+MODULE_DESCRIPTION("Driver for the Diolan DLN2 I2C master interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dln2-i2c");
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 88bdc8f612e2..bc4e787096e8 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -127,6 +127,14 @@ config AT91_ADC
help
Say yes here to build support for Atmel AT91 ADC.
+config AXP288_ADC
+ tristate "X-Powers AXP288 ADC driver"
+ depends on MFD_AXP20X
+ help
+ Say yes here to have support for X-Powers power management IC (PMIC) ADC
+ device. Depending on platform configuration, this general purpose ADC can
+ be used for sampling sensors such as thermal resistors.
+
config EXYNOS_ADC
tristate "Exynos ADC driver support"
depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index cb88a6a23b8f..f30093f5b67a 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD799X) += ad799x.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_MAX1027) += max1027.o
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
new file mode 100644
index 000000000000..08bcfb061ca5
--- /dev/null
+++ b/drivers/iio/adc/axp288_adc.c
@@ -0,0 +1,261 @@
+/*
+ * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver
+ *
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/platform_device.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+
+#define AXP288_ADC_EN_MASK 0xF1
+#define AXP288_ADC_TS_PIN_GPADC 0xF2
+#define AXP288_ADC_TS_PIN_ON 0xF3
+
+enum axp288_adc_id {
+ AXP288_ADC_TS,
+ AXP288_ADC_PMIC,
+ AXP288_ADC_GP,
+ AXP288_ADC_BATT_CHRG_I,
+ AXP288_ADC_BATT_DISCHRG_I,
+ AXP288_ADC_BATT_V,
+ AXP288_ADC_NR_CHAN,
+};
+
+struct axp288_adc_info {
+ int irq;
+ struct regmap *regmap;
+};
+
+static const struct iio_chan_spec const axp288_adc_channels[] = {
+ {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 0,
+ .address = AXP288_TS_ADC_H,
+ .datasheet_name = "TS_PIN",
+ }, {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 1,
+ .address = AXP288_PMIC_ADC_H,
+ .datasheet_name = "PMIC_TEMP",
+ }, {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 2,
+ .address = AXP288_GP_ADC_H,
+ .datasheet_name = "GPADC",
+ }, {
+ .indexed = 1,
+ .type = IIO_CURRENT,
+ .channel = 3,
+ .address = AXP20X_BATT_CHRG_I_H,
+ .datasheet_name = "BATT_CHG_I",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }, {
+ .indexed = 1,
+ .type = IIO_CURRENT,
+ .channel = 4,
+ .address = AXP20X_BATT_DISCHRG_I_H,
+ .datasheet_name = "BATT_DISCHRG_I",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }, {
+ .indexed = 1,
+ .type = IIO_VOLTAGE,
+ .channel = 5,
+ .address = AXP20X_BATT_V_H,
+ .datasheet_name = "BATT_V",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+};
+
+#define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name, \
+ _consumer_channel) \
+ { \
+ .adc_channel_label = _adc_channel_label, \
+ .consumer_dev_name = _consumer_dev_name, \
+ .consumer_channel = _consumer_channel, \
+ }
+
+/* for consumer drivers */
+static struct iio_map axp288_adc_default_maps[] = {
+ AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"),
+ AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"),
+ AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"),
+ AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"),
+ AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"),
+ AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"),
+ {},
+};
+
+static int axp288_adc_read_channel(int *val, unsigned long address,
+ struct regmap *regmap)
+{
+ u8 buf[2];
+
+ if (regmap_bulk_read(regmap, address, buf, 2))
+ return -EIO;
+ *val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F);
+
+ return IIO_VAL_INT;
+}
+
+static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
+ unsigned long address)
+{
+ /* channels other than GPADC do not need to switch TS pin */
+ if (address != AXP288_GP_ADC_H)
+ return 0;
+
+ return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+}
+
+static int axp288_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret;
+ struct axp288_adc_info *info = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+ chan->address)) {
+ dev_err(&indio_dev->dev, "GPADC mode\n");
+ ret = -EINVAL;
+ break;
+ }
+ ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+ chan->address))
+ dev_err(&indio_dev->dev, "TS pin restore\n");
+ break;
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int axp288_adc_set_state(struct regmap *regmap)
+{
+ /* ADC should be always enabled for internal FG to function */
+ if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
+ return -EIO;
+
+ return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+}
+
+static const struct iio_info axp288_adc_iio_info = {
+ .read_raw = &axp288_adc_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int axp288_adc_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct axp288_adc_info *info;
+ struct iio_dev *indio_dev;
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ info = iio_priv(indio_dev);
+ info->irq = platform_get_irq(pdev, 0);
+ if (info->irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return info->irq;
+ }
+ platform_set_drvdata(pdev, indio_dev);
+ info->regmap = axp20x->regmap;
+ /*
+ * Set ADC to enabled state at all time, including system suspend.
+ * otherwise internal fuel gauge functionality may be affected.
+ */
+ ret = axp288_adc_set_state(axp20x->regmap);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable ADC device\n");
+ return ret;
+ }
+
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = pdev->name;
+ indio_dev->channels = axp288_adc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels);
+ indio_dev->info = &axp288_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ ret = iio_map_array_register(indio_dev, axp288_adc_default_maps);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to register iio device\n");
+ goto err_array_unregister;
+ }
+ return 0;
+
+err_array_unregister:
+ iio_map_array_unregister(indio_dev);
+
+ return ret;
+}
+
+static int axp288_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+ iio_device_unregister(indio_dev);
+ iio_map_array_unregister(indio_dev);
+
+ return 0;
+}
+
+static struct platform_device_id axp288_adc_id_table[] = {
+ { .name = "axp288_adc" },
+ {},
+};
+
+static struct platform_driver axp288_adc_driver = {
+ .probe = axp288_adc_probe,
+ .remove = axp288_adc_remove,
+ .id_table = axp288_adc_id_table,
+ .driver = {
+ .name = "axp288_adc",
+ },
+};
+
+MODULE_DEVICE_TABLE(platform, axp288_adc_id_table);
+
+module_platform_driver(axp288_adc_driver);
+
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
+MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1456ea70bbc7..2e6b7311fabc 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -59,6 +59,17 @@ config MFD_AAT2870_CORE
additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_ATMEL_HLCDC
+ tristate "Atmel HLCDC (High-end LCD Controller)"
+ select MFD_CORE
+ select REGMAP_MMIO
+ depends on OF
+ help
+ If you say yes here you get support for the HLCDC block.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config MFD_BCM590XX
tristate "Broadcom BCM590xx PMUs"
select MFD_CORE
@@ -74,7 +85,8 @@ config MFD_AXP20X
select REGMAP_IRQ
depends on I2C=y
help
- If you say Y here you get support for the X-Powers AXP202 and AXP209.
+ If you say Y here you get support for the X-Powers AXP202, AXP209 and
+ AXP288 power management IC (PMIC).
This driver include only the core APIs. You have to select individual
components like regulators or the PEK (Power Enable Key) under the
corresponding menus.
@@ -183,6 +195,16 @@ config MFD_DA9063
Additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_DLN2
+ tristate "Diolan DLN2 support"
+ select MFD_CORE
+ depends on USB
+ help
+ This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
+ DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
+ etc. must be enabled in order to use the functionality of
+ the device.
+
config MFD_MC13XXX
tristate
depends on (SPI_MASTER || I2C)
@@ -655,7 +677,6 @@ config MFD_SEC_CORE
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- select REGULATOR
help
Support for the Samsung Electronics MFD series.
This driver provides common support for accessing the device,
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8bd54b1253af..53467e211381 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o
obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o
-rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
+rtsx_pci-objs := rtsx_pcr.o rtsx_gops.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o
@@ -157,6 +157,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
+obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
@@ -174,6 +175,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_DLN2) += dln2.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 8e0dae59844d..94dbcdd2a1ff 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -85,63 +85,6 @@ shutdown:
}
}
-/*
- * Use the AB WD to reset the platform. It will perform a hard
- * reset instead of a soft reset. Write the reset reason to
- * the AB before reset, which can be read upon restart.
- */
-void ab8500_restart(char mode, const char *cmd)
-{
- struct ab8500_platform_data *plat;
- struct ab8500_sysctrl_platform_data *pdata;
- u16 reason = 0;
- u8 val;
-
- if (sysctrl_dev == NULL) {
- pr_err("%s: sysctrl not initialized\n", __func__);
- return;
- }
-
- plat = dev_get_platdata(sysctrl_dev->parent);
- pdata = plat->sysctrl;
- if (pdata && pdata->reboot_reason_code)
- reason = pdata->reboot_reason_code(cmd);
- else
- pr_warn("[%s] No reboot reason set. Default reason %d\n",
- __func__, reason);
-
- /*
- * Disable RTC alarm, just a precaution so that no alarm
- * is running when WD reset is executed.
- */
- abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
- RTC_CTRL , &val);
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
-
- /*
- * Android is not using the RTC alarm registers during reboot
- * so we borrow them for writing the reason of reset
- */
-
- /* reason[8 LSB] */
- val = reason & 0xFF;
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- AB8500_ALARM_MIN_LOW , val);
-
- /* reason[8 MSB] */
- val = (reason>>8) & 0xFF;
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- AB8500_ALARM_MIN_MID , val);
-
- /* Setting WD timeout to 0 */
- ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
-
- /* Setting the parameters to AB8500 WD*/
- ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
- AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
-}
-
static inline bool valid_bank(u8 bank)
{
return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
index 5145d78bf07e..8ef58bcff193 100644
--- a/drivers/mfd/arizona-spi.c
+++ b/drivers/mfd/arizona-spi.c
@@ -75,7 +75,9 @@ static int arizona_spi_probe(struct spi_device *spi)
static int arizona_spi_remove(struct spi_device *spi)
{
struct arizona *arizona = spi_get_drvdata(spi);
+
arizona_dev_exit(arizona);
+
return 0;
}
diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
new file mode 100644
index 000000000000..cfd58f4cc5c3
--- /dev/null
+++ b/drivers/mfd/atmel-hlcdc.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/atmel-hlcdc.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define ATMEL_HLCDC_REG_MAX (0x4000 - 0x4)
+
+static const struct mfd_cell atmel_hlcdc_cells[] = {
+ {
+ .name = "atmel-hlcdc-pwm",
+ .of_compatible = "atmel,hlcdc-pwm",
+ },
+ {
+ .name = "atmel-hlcdc-dc",
+ .of_compatible = "atmel,hlcdc-display-controller",
+ },
+};
+
+static const struct regmap_config atmel_hlcdc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = ATMEL_HLCDC_REG_MAX,
+};
+
+static int atmel_hlcdc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct atmel_hlcdc *hlcdc;
+ struct resource *res;
+ void __iomem *regs;
+
+ hlcdc = devm_kzalloc(dev, sizeof(*hlcdc), GFP_KERNEL);
+ if (!hlcdc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ hlcdc->irq = platform_get_irq(pdev, 0);
+ if (hlcdc->irq < 0)
+ return hlcdc->irq;
+
+ hlcdc->periph_clk = devm_clk_get(dev, "periph_clk");
+ if (IS_ERR(hlcdc->periph_clk)) {
+ dev_err(dev, "failed to get peripheral clock\n");
+ return PTR_ERR(hlcdc->periph_clk);
+ }
+
+ hlcdc->sys_clk = devm_clk_get(dev, "sys_clk");
+ if (IS_ERR(hlcdc->sys_clk)) {
+ dev_err(dev, "failed to get system clock\n");
+ return PTR_ERR(hlcdc->sys_clk);
+ }
+
+ hlcdc->slow_clk = devm_clk_get(dev, "slow_clk");
+ if (IS_ERR(hlcdc->slow_clk)) {
+ dev_err(dev, "failed to get slow clock\n");
+ return PTR_ERR(hlcdc->slow_clk);
+ }
+
+ hlcdc->regmap = devm_regmap_init_mmio(dev, regs,
+ &atmel_hlcdc_regmap_config);
+ if (IS_ERR(hlcdc->regmap))
+ return PTR_ERR(hlcdc->regmap);
+
+ dev_set_drvdata(dev, hlcdc);
+
+ return mfd_add_devices(dev, -1, atmel_hlcdc_cells,
+ ARRAY_SIZE(atmel_hlcdc_cells),
+ NULL, 0, NULL);
+}
+
+static int atmel_hlcdc_remove(struct platform_device *pdev)
+{
+ mfd_remove_devices(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id atmel_hlcdc_match[] = {
+ { .compatible = "atmel,sama5d3-hlcdc" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver atmel_hlcdc_driver = {
+ .probe = atmel_hlcdc_probe,
+ .remove = atmel_hlcdc_remove,
+ .driver = {
+ .name = "atmel-hlcdc",
+ .of_match_table = atmel_hlcdc_match,
+ },
+};
+module_platform_driver(atmel_hlcdc_driver);
+
+MODULE_ALIAS("platform:atmel-hlcdc");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Atmel HLCDC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 6231adbb295d..c522ee22b1c0 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -1,9 +1,9 @@
/*
- * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
+ * axp20x.c - MFD core driver for the X-Powers' Power Management ICs
*
- * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
- * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
- * as well as 4 configurable GPIOs.
+ * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
+ * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as configurable GPIOs.
*
* Author: Carlo Caione <carlo@caione.org>
*
@@ -25,9 +25,16 @@
#include <linux/mfd/core.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/acpi.h>
#define AXP20X_OFF 0x80
+static const char const *axp20x_model_names[] = {
+ "AXP202",
+ "AXP209",
+ "AXP288",
+};
+
static const struct regmap_range axp20x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
@@ -47,6 +54,25 @@ static const struct regmap_access_table axp20x_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
+static const struct regmap_range axp288_writeable_ranges[] = {
+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
+ regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
+};
+
+static const struct regmap_range axp288_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
+};
+
+static const struct regmap_access_table axp288_writeable_table = {
+ .yes_ranges = axp288_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges),
+};
+
+static const struct regmap_access_table axp288_volatile_table = {
+ .yes_ranges = axp288_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges),
+};
+
static struct resource axp20x_pek_resources[] = {
{
.name = "PEK_DBR",
@@ -61,6 +87,39 @@ static struct resource axp20x_pek_resources[] = {
},
};
+static struct resource axp288_battery_resources[] = {
+ {
+ .start = AXP288_IRQ_QWBTU,
+ .end = AXP288_IRQ_QWBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WBTU,
+ .end = AXP288_IRQ_WBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QWBTO,
+ .end = AXP288_IRQ_QWBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WBTO,
+ .end = AXP288_IRQ_WBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WL2,
+ .end = AXP288_IRQ_WL2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WL1,
+ .end = AXP288_IRQ_WL1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static const struct regmap_config axp20x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -70,47 +129,96 @@ static const struct regmap_config axp20x_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
-#define AXP20X_IRQ(_irq, _off, _mask) \
- [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+static const struct regmap_config axp288_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp288_writeable_table,
+ .volatile_table = &axp288_volatile_table,
+ .max_register = AXP288_FG_TUNE5,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \
+ [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
static const struct regmap_irq axp20x_regmap_irqs[] = {
- AXP20X_IRQ(ACIN_OVER_V, 0, 7),
- AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
- AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
- AXP20X_IRQ(VBUS_OVER_V, 0, 4),
- AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
- AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
- AXP20X_IRQ(VBUS_V_LOW, 0, 1),
- AXP20X_IRQ(BATT_PLUGIN, 1, 7),
- AXP20X_IRQ(BATT_REMOVAL, 1, 6),
- AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
- AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
- AXP20X_IRQ(CHARG, 1, 3),
- AXP20X_IRQ(CHARG_DONE, 1, 2),
- AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
- AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
- AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
- AXP20X_IRQ(CHARG_I_LOW, 2, 6),
- AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
- AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
- AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
- AXP20X_IRQ(PEK_SHORT, 2, 1),
- AXP20X_IRQ(PEK_LONG, 2, 0),
- AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
- AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
- AXP20X_IRQ(VBUS_VALID, 3, 5),
- AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
- AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
- AXP20X_IRQ(VBUS_SESS_END, 3, 2),
- AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
- AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
- AXP20X_IRQ(TIMER, 4, 7),
- AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
- AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
- AXP20X_IRQ(GPIO3_INPUT, 4, 3),
- AXP20X_IRQ(GPIO2_INPUT, 4, 2),
- AXP20X_IRQ(GPIO1_INPUT, 4, 1),
- AXP20X_IRQ(GPIO0_INPUT, 4, 0),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1),
+ INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7),
+ INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6),
+ INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5),
+ INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4),
+ INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3),
+ INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1),
+ INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0),
+ INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7),
+ INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6),
+ INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5),
+ INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4),
+ INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3),
+ INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1),
+ INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0),
+ INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7),
+ INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2),
+ INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7),
+ INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6),
+ INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5),
+ INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3),
+ INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2),
+ INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1),
+ INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0),
+};
+
+/* some IRQs are compatible with axp20x models */
+static const struct regmap_irq axp288_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2),
+ INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3),
+ INIT_REGMAP_IRQ(AXP288, OV, 0, 4),
+
+ INIT_REGMAP_IRQ(AXP288, DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3),
+ INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4),
+ INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5),
+ INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6),
+ INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7),
+
+ INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0),
+ INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1),
+ INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2),
+ INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3),
+ INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4),
+ INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5),
+ INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6),
+ INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7),
+
+ INIT_REGMAP_IRQ(AXP288, WL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP288, WL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2),
+ INIT_REGMAP_IRQ(AXP288, OT, 3, 7),
+
+ INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0),
+ INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1),
+ INIT_REGMAP_IRQ(AXP288, POKO, 4, 2),
+ INIT_REGMAP_IRQ(AXP288, POKL, 4, 3),
+ INIT_REGMAP_IRQ(AXP288, POKS, 4, 4),
+ INIT_REGMAP_IRQ(AXP288, POKN, 4, 5),
+ INIT_REGMAP_IRQ(AXP288, POKP, 4, 6),
+ INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7),
+
+ INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0),
+ INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
static const struct of_device_id axp20x_of_match[] = {
@@ -128,16 +236,39 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
+static const struct acpi_device_id axp20x_acpi_match[] = {
+ {
+ .id = "INT33F4",
+ .driver_data = AXP288_ID,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match);
+
static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
.name = "axp20x_irq_chip",
.status_base = AXP20X_IRQ1_STATE,
.ack_base = AXP20X_IRQ1_STATE,
.mask_base = AXP20X_IRQ1_EN,
- .num_regs = 5,
+ .mask_invert = true,
+ .init_ack_masked = true,
.irqs = axp20x_regmap_irqs,
.num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
+ .num_regs = 5,
+
+};
+
+static const struct regmap_irq_chip axp288_regmap_irq_chip = {
+ .name = "axp288_irq_chip",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
.mask_invert = true,
.init_ack_masked = true,
+ .irqs = axp288_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp288_regmap_irqs),
+ .num_regs = 6,
+
};
static struct mfd_cell axp20x_cells[] = {
@@ -150,36 +281,155 @@ static struct mfd_cell axp20x_cells[] = {
},
};
+static struct resource axp288_adc_resources[] = {
+ {
+ .name = "GPADC",
+ .start = AXP288_IRQ_GPADC,
+ .end = AXP288_IRQ_GPADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource axp288_charger_resources[] = {
+ {
+ .start = AXP288_IRQ_OV,
+ .end = AXP288_IRQ_OV,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_DONE,
+ .end = AXP288_IRQ_DONE,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CHARGING,
+ .end = AXP288_IRQ_CHARGING,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_SAFE_QUIT,
+ .end = AXP288_IRQ_SAFE_QUIT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_SAFE_ENTER,
+ .end = AXP288_IRQ_SAFE_ENTER,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QCBTU,
+ .end = AXP288_IRQ_QCBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CBTU,
+ .end = AXP288_IRQ_CBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QCBTO,
+ .end = AXP288_IRQ_QCBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CBTO,
+ .end = AXP288_IRQ_CBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell axp288_cells[] = {
+ {
+ .name = "axp288_adc",
+ .num_resources = ARRAY_SIZE(axp288_adc_resources),
+ .resources = axp288_adc_resources,
+ },
+ {
+ .name = "axp288_charger",
+ .num_resources = ARRAY_SIZE(axp288_charger_resources),
+ .resources = axp288_charger_resources,
+ },
+ {
+ .name = "axp288_battery",
+ .num_resources = ARRAY_SIZE(axp288_battery_resources),
+ .resources = axp288_battery_resources,
+ },
+};
+
static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
+ if (axp20x_pm_power_off->variant == AXP288_ID)
+ return;
+
regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
AXP20X_OFF);
}
+static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
+{
+ const struct acpi_device_id *acpi_id;
+ const struct of_device_id *of_id;
+
+ if (dev->of_node) {
+ of_id = of_match_device(axp20x_of_match, dev);
+ if (!of_id) {
+ dev_err(dev, "Unable to match OF ID\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) of_id->data;
+ } else {
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!acpi_id || !acpi_id->driver_data) {
+ dev_err(dev, "Unable to match ACPI ID and data\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) acpi_id->driver_data;
+ }
+
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
+ axp20x->cells = axp20x_cells;
+ axp20x->regmap_cfg = &axp20x_regmap_config;
+ axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
+ break;
+ case AXP288_ID:
+ axp20x->cells = axp288_cells;
+ axp20x->nr_cells = ARRAY_SIZE(axp288_cells);
+ axp20x->regmap_cfg = &axp288_regmap_config;
+ axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
+ break;
+ default:
+ dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
+ return -EINVAL;
+ }
+ dev_info(dev, "AXP20x variant %s found\n",
+ axp20x_model_names[axp20x->variant]);
+
+ return 0;
+}
+
static int axp20x_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct axp20x_dev *axp20x;
- const struct of_device_id *of_id;
int ret;
axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
if (!axp20x)
return -ENOMEM;
- of_id = of_match_device(axp20x_of_match, &i2c->dev);
- if (!of_id) {
- dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
- return -ENODEV;
- }
- axp20x->variant = (long) of_id->data;
+ ret = axp20x_match_device(axp20x, &i2c->dev);
+ if (ret)
+ return ret;
axp20x->i2c_client = i2c;
axp20x->dev = &i2c->dev;
dev_set_drvdata(axp20x->dev, axp20x);
- axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+ axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg);
if (IS_ERR(axp20x->regmap)) {
ret = PTR_ERR(axp20x->regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
@@ -188,15 +438,15 @@ static int axp20x_i2c_probe(struct i2c_client *i2c,
ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
IRQF_ONESHOT | IRQF_SHARED, -1,
- &axp20x_regmap_irq_chip,
+ axp20x->regmap_irq_chip,
&axp20x->regmap_irqc);
if (ret) {
dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
return ret;
}
- ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
- ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+ ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells,
+ axp20x->nr_cells, NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
@@ -234,6 +484,7 @@ static struct i2c_driver axp20x_i2c_driver = {
.name = "axp20x",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(axp20x_of_match),
+ .acpi_match_table = ACPI_PTR(axp20x_acpi_match),
},
.probe = axp20x_i2c_probe,
.remove = axp20x_i2c_remove,
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index 93db8bb8c8f0..f38bc98a3c57 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -118,7 +118,7 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
da9063->irq_base = pdata->irq_base;
} else {
da9063->flags = 0;
- da9063->irq_base = 0;
+ da9063->irq_base = -1;
}
da9063->chip_irq = irq;
@@ -168,6 +168,8 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
return ret;
}
+ da9063->irq_base = regmap_irq_chip_get_base(da9063->regmap_irq);
+
ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
NULL);
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 193cf168ba84..a8204730f01c 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -3150,23 +3150,28 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu");
if (!res) {
dev_err(&pdev->dev, "no prcmu memory region provided\n");
- return -ENOENT;
+ return -EINVAL;
}
prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (!prcmu_base) {
dev_err(&pdev->dev,
"failed to ioremap prcmu register memory\n");
- return -ENOENT;
+ return -ENOMEM;
}
init_prcm_registers();
dbx500_fw_version_init(pdev, pdata->version_offset);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
if (!res) {
dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
- return -ENOENT;
+ return -EINVAL;
}
tcdm_base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
+ if (!tcdm_base) {
+ dev_err(&pdev->dev,
+ "failed to ioremap prcmu-tcdm register memory\n");
+ return -ENOMEM;
+ }
/* Clean up the mailbox interrupts after pre-kernel code. */
writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
@@ -3174,15 +3179,14 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev, "no prcmu irq provided\n");
- return -ENOENT;
+ return irq;
}
err = request_threaded_irq(irq, prcmu_irq_handler,
prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
if (err < 0) {
pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
- err = -EBUSY;
- goto no_irq_return;
+ return err;
}
db8500_irq_init(np);
@@ -3206,7 +3210,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
if (err) {
mfd_remove_devices(&pdev->dev);
pr_err("prcmu: Failed to add subdevices\n");
- goto no_irq_return;
+ return err;
}
}
@@ -3214,12 +3218,10 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
if (err) {
mfd_remove_devices(&pdev->dev);
pr_err("prcmu: Failed to add ab8500 subdevice\n");
- goto no_irq_return;
+ return err;
}
pr_info("DB8500 PRCMU initialized\n");
-
-no_irq_return:
return err;
}
static const struct of_device_id db8500_prcmu_match[] = {
diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
new file mode 100644
index 000000000000..6d49685d4ee4
--- /dev/null
+++ b/drivers/mfd/dln2.c
@@ -0,0 +1,781 @@
+/*
+ * Driver for the Diolan DLN-2 USB adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Derived from:
+ * i2c-diolan-u2c.c
+ * Copyright (c) 2010-2011 Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/dln2.h>
+#include <linux/rculist.h>
+
+struct dln2_header {
+ __le16 size;
+ __le16 id;
+ __le16 echo;
+ __le16 handle;
+};
+
+struct dln2_response {
+ struct dln2_header hdr;
+ __le16 result;
+};
+
+#define DLN2_GENERIC_MODULE_ID 0x00
+#define DLN2_GENERIC_CMD(cmd) DLN2_CMD(cmd, DLN2_GENERIC_MODULE_ID)
+#define CMD_GET_DEVICE_VER DLN2_GENERIC_CMD(0x30)
+#define CMD_GET_DEVICE_SN DLN2_GENERIC_CMD(0x31)
+
+#define DLN2_HW_ID 0x200
+#define DLN2_USB_TIMEOUT 200 /* in ms */
+#define DLN2_MAX_RX_SLOTS 16
+#define DLN2_MAX_URBS 16
+#define DLN2_RX_BUF_SIZE 512
+
+enum dln2_handle {
+ DLN2_HANDLE_EVENT = 0, /* don't change, hardware defined */
+ DLN2_HANDLE_CTRL,
+ DLN2_HANDLE_GPIO,
+ DLN2_HANDLE_I2C,
+ DLN2_HANDLE_SPI,
+ DLN2_HANDLES
+};
+
+/*
+ * Receive context used between the receive demultiplexer and the transfer
+ * routine. While sending a request the transfer routine will look for a free
+ * receive context and use it to wait for a response and to receive the URB and
+ * thus the response data.
+ */
+struct dln2_rx_context {
+ /* completion used to wait for a response */
+ struct completion done;
+
+ /* if non-NULL the URB contains the response */
+ struct urb *urb;
+
+ /* if true then this context is used to wait for a response */
+ bool in_use;
+};
+
+/*
+ * Receive contexts for a particular DLN2 module (i2c, gpio, etc.). We use the
+ * handle header field to identify the module in dln2_dev.mod_rx_slots and then
+ * the echo header field to index the slots field and find the receive context
+ * for a particular request.
+ */
+struct dln2_mod_rx_slots {
+ /* RX slots bitmap */
+ DECLARE_BITMAP(bmap, DLN2_MAX_RX_SLOTS);
+
+ /* used to wait for a free RX slot */
+ wait_queue_head_t wq;
+
+ /* used to wait for an RX operation to complete */
+ struct dln2_rx_context slots[DLN2_MAX_RX_SLOTS];
+
+ /* avoid races between alloc/free_rx_slot and dln2_rx_transfer */
+ spinlock_t lock;
+};
+
+struct dln2_dev {
+ struct usb_device *usb_dev;
+ struct usb_interface *interface;
+ u8 ep_in;
+ u8 ep_out;
+
+ struct urb *rx_urb[DLN2_MAX_URBS];
+ void *rx_buf[DLN2_MAX_URBS];
+
+ struct dln2_mod_rx_slots mod_rx_slots[DLN2_HANDLES];
+
+ struct list_head event_cb_list;
+ spinlock_t event_cb_lock;
+
+ bool disconnect;
+ int active_transfers;
+ wait_queue_head_t disconnect_wq;
+ spinlock_t disconnect_lock;
+};
+
+struct dln2_event_cb_entry {
+ struct list_head list;
+ u16 id;
+ struct platform_device *pdev;
+ dln2_event_cb_t callback;
+};
+
+int dln2_register_event_cb(struct platform_device *pdev, u16 id,
+ dln2_event_cb_t event_cb)
+{
+ struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent);
+ struct dln2_event_cb_entry *i, *entry;
+ unsigned long flags;
+ int ret = 0;
+
+ entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return -ENOMEM;
+
+ entry->id = id;
+ entry->callback = event_cb;
+ entry->pdev = pdev;
+
+ spin_lock_irqsave(&dln2->event_cb_lock, flags);
+
+ list_for_each_entry(i, &dln2->event_cb_list, list) {
+ if (i->id == id) {
+ ret = -EBUSY;
+ break;
+ }
+ }
+
+ if (!ret)
+ list_add_rcu(&entry->list, &dln2->event_cb_list);
+
+ spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
+
+ if (ret)
+ kfree(entry);
+
+ return ret;
+}
+EXPORT_SYMBOL(dln2_register_event_cb);
+
+void dln2_unregister_event_cb(struct platform_device *pdev, u16 id)
+{
+ struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent);
+ struct dln2_event_cb_entry *i;
+ unsigned long flags;
+ bool found = false;
+
+ spin_lock_irqsave(&dln2->event_cb_lock, flags);
+
+ list_for_each_entry(i, &dln2->event_cb_list, list) {
+ if (i->id == id) {
+ list_del_rcu(&i->list);
+ found = true;
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
+
+ if (found) {
+ synchronize_rcu();
+ kfree(i);
+ }
+}
+EXPORT_SYMBOL(dln2_unregister_event_cb);
+
+/*
+ * Returns true if a valid transfer slot is found. In this case the URB must not
+ * be resubmitted immediately in dln2_rx as we need the data when dln2_transfer
+ * is woke up. It will be resubmitted there.
+ */
+static bool dln2_transfer_complete(struct dln2_dev *dln2, struct urb *urb,
+ u16 handle, u16 rx_slot)
+{
+ struct device *dev = &dln2->interface->dev;
+ struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle];
+ struct dln2_rx_context *rxc;
+ bool valid_slot = false;
+
+ if (rx_slot >= DLN2_MAX_RX_SLOTS)
+ goto out;
+
+ rxc = &rxs->slots[rx_slot];
+
+ /*
+ * No need to disable interrupts as this lock is not taken in interrupt
+ * context elsewhere in this driver. This function (or its callers) are
+ * also not exported to other modules.
+ */
+ spin_lock(&rxs->lock);
+ if (rxc->in_use && !rxc->urb) {
+ rxc->urb = urb;
+ complete(&rxc->done);
+ valid_slot = true;
+ }
+ spin_unlock(&rxs->lock);
+
+out:
+ if (!valid_slot)
+ dev_warn(dev, "bad/late response %d/%d\n", handle, rx_slot);
+
+ return valid_slot;
+}
+
+static void dln2_run_event_callbacks(struct dln2_dev *dln2, u16 id, u16 echo,
+ void *data, int len)
+{
+ struct dln2_event_cb_entry *i;
+
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(i, &dln2->event_cb_list, list) {
+ if (i->id == id) {
+ i->callback(i->pdev, echo, data, len);
+ break;
+ }
+ }
+
+ rcu_read_unlock();
+}
+
+static void dln2_rx(struct urb *urb)
+{
+ struct dln2_dev *dln2 = urb->context;
+ struct dln2_header *hdr = urb->transfer_buffer;
+ struct device *dev = &dln2->interface->dev;
+ u16 id, echo, handle, size;
+ u8 *data;
+ int len;
+ int err;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -EPIPE:
+ /* this urb is terminated, clean up */
+ dev_dbg(dev, "urb shutting down with status %d\n", urb->status);
+ return;
+ default:
+ dev_dbg(dev, "nonzero urb status received %d\n", urb->status);
+ goto out;
+ }
+
+ if (urb->actual_length < sizeof(struct dln2_header)) {
+ dev_err(dev, "short response: %d\n", urb->actual_length);
+ goto out;
+ }
+
+ handle = le16_to_cpu(hdr->handle);
+ id = le16_to_cpu(hdr->id);
+ echo = le16_to_cpu(hdr->echo);
+ size = le16_to_cpu(hdr->size);
+
+ if (size != urb->actual_length) {
+ dev_err(dev, "size mismatch: handle %x cmd %x echo %x size %d actual %d\n",
+ handle, id, echo, size, urb->actual_length);
+ goto out;
+ }
+
+ if (handle >= DLN2_HANDLES) {
+ dev_warn(dev, "invalid handle %d\n", handle);
+ goto out;
+ }
+
+ data = urb->transfer_buffer + sizeof(struct dln2_header);
+ len = urb->actual_length - sizeof(struct dln2_header);
+
+ if (handle == DLN2_HANDLE_EVENT) {
+ dln2_run_event_callbacks(dln2, id, echo, data, len);
+ } else {
+ /* URB will be re-submitted in _dln2_transfer (free_rx_slot) */
+ if (dln2_transfer_complete(dln2, urb, handle, echo))
+ return;
+ }
+
+out:
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0)
+ dev_err(dev, "failed to resubmit RX URB: %d\n", err);
+}
+
+static void *dln2_prep_buf(u16 handle, u16 cmd, u16 echo, const void *obuf,
+ int *obuf_len, gfp_t gfp)
+{
+ int len;
+ void *buf;
+ struct dln2_header *hdr;
+
+ len = *obuf_len + sizeof(*hdr);
+ buf = kmalloc(len, gfp);
+ if (!buf)
+ return NULL;
+
+ hdr = (struct dln2_header *)buf;
+ hdr->id = cpu_to_le16(cmd);
+ hdr->size = cpu_to_le16(len);
+ hdr->echo = cpu_to_le16(echo);
+ hdr->handle = cpu_to_le16(handle);
+
+ memcpy(buf + sizeof(*hdr), obuf, *obuf_len);
+
+ *obuf_len = len;
+
+ return buf;
+}
+
+static int dln2_send_wait(struct dln2_dev *dln2, u16 handle, u16 cmd, u16 echo,
+ const void *obuf, int obuf_len)
+{
+ int ret = 0;
+ int len = obuf_len;
+ void *buf;
+ int actual;
+
+ buf = dln2_prep_buf(handle, cmd, echo, obuf, &len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usb_bulk_msg(dln2->usb_dev,
+ usb_sndbulkpipe(dln2->usb_dev, dln2->ep_out),
+ buf, len, &actual, DLN2_USB_TIMEOUT);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static bool find_free_slot(struct dln2_dev *dln2, u16 handle, int *slot)
+{
+ struct dln2_mod_rx_slots *rxs;
+ unsigned long flags;
+
+ if (dln2->disconnect) {
+ *slot = -ENODEV;
+ return true;
+ }
+
+ rxs = &dln2->mod_rx_slots[handle];
+
+ spin_lock_irqsave(&rxs->lock, flags);
+
+ *slot = find_first_zero_bit(rxs->bmap, DLN2_MAX_RX_SLOTS);
+
+ if (*slot < DLN2_MAX_RX_SLOTS) {
+ struct dln2_rx_context *rxc = &rxs->slots[*slot];
+
+ set_bit(*slot, rxs->bmap);
+ rxc->in_use = true;
+ }
+
+ spin_unlock_irqrestore(&rxs->lock, flags);
+
+ return *slot < DLN2_MAX_RX_SLOTS;
+}
+
+static int alloc_rx_slot(struct dln2_dev *dln2, u16 handle)
+{
+ int ret;
+ int slot;
+
+ /*
+ * No need to timeout here, the wait is bounded by the timeout in
+ * _dln2_transfer.
+ */
+ ret = wait_event_interruptible(dln2->mod_rx_slots[handle].wq,
+ find_free_slot(dln2, handle, &slot));
+ if (ret < 0)
+ return ret;
+
+ return slot;
+}
+
+static void free_rx_slot(struct dln2_dev *dln2, u16 handle, int slot)
+{
+ struct dln2_mod_rx_slots *rxs;
+ struct urb *urb = NULL;
+ unsigned long flags;
+ struct dln2_rx_context *rxc;
+
+ rxs = &dln2->mod_rx_slots[handle];
+
+ spin_lock_irqsave(&rxs->lock, flags);
+
+ clear_bit(slot, rxs->bmap);
+
+ rxc = &rxs->slots[slot];
+ rxc->in_use = false;
+ urb = rxc->urb;
+ rxc->urb = NULL;
+ reinit_completion(&rxc->done);
+
+ spin_unlock_irqrestore(&rxs->lock, flags);
+
+ if (urb) {
+ int err;
+ struct device *dev = &dln2->interface->dev;
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err < 0)
+ dev_err(dev, "failed to resubmit RX URB: %d\n", err);
+ }
+
+ wake_up_interruptible(&rxs->wq);
+}
+
+static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd,
+ const void *obuf, unsigned obuf_len,
+ void *ibuf, unsigned *ibuf_len)
+{
+ int ret = 0;
+ int rx_slot;
+ struct dln2_response *rsp;
+ struct dln2_rx_context *rxc;
+ struct device *dev = &dln2->interface->dev;
+ const unsigned long timeout = DLN2_USB_TIMEOUT * HZ / 1000;
+ struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle];
+ int size;
+
+ spin_lock(&dln2->disconnect_lock);
+ if (!dln2->disconnect)
+ dln2->active_transfers++;
+ else
+ ret = -ENODEV;
+ spin_unlock(&dln2->disconnect_lock);
+
+ if (ret)
+ return ret;
+
+ rx_slot = alloc_rx_slot(dln2, handle);
+ if (rx_slot < 0) {
+ ret = rx_slot;
+ goto out_decr;
+ }
+
+ ret = dln2_send_wait(dln2, handle, cmd, rx_slot, obuf, obuf_len);
+ if (ret < 0) {
+ dev_err(dev, "USB write failed: %d\n", ret);
+ goto out_free_rx_slot;
+ }
+
+ rxc = &rxs->slots[rx_slot];
+
+ ret = wait_for_completion_interruptible_timeout(&rxc->done, timeout);
+ if (ret <= 0) {
+ if (!ret)
+ ret = -ETIMEDOUT;
+ goto out_free_rx_slot;
+ } else {
+ ret = 0;
+ }
+
+ if (dln2->disconnect) {
+ ret = -ENODEV;
+ goto out_free_rx_slot;
+ }
+
+ /* if we got here we know that the response header has been checked */
+ rsp = rxc->urb->transfer_buffer;
+ size = le16_to_cpu(rsp->hdr.size);
+
+ if (size < sizeof(*rsp)) {
+ ret = -EPROTO;
+ goto out_free_rx_slot;
+ }
+
+ if (le16_to_cpu(rsp->result) > 0x80) {
+ dev_dbg(dev, "%d received response with error %d\n",
+ handle, le16_to_cpu(rsp->result));
+ ret = -EREMOTEIO;
+ goto out_free_rx_slot;
+ }
+
+ if (!ibuf)
+ goto out_free_rx_slot;
+
+ if (*ibuf_len > size - sizeof(*rsp))
+ *ibuf_len = size - sizeof(*rsp);
+
+ memcpy(ibuf, rsp + 1, *ibuf_len);
+
+out_free_rx_slot:
+ free_rx_slot(dln2, handle, rx_slot);
+out_decr:
+ spin_lock(&dln2->disconnect_lock);
+ dln2->active_transfers--;
+ spin_unlock(&dln2->disconnect_lock);
+ if (dln2->disconnect)
+ wake_up(&dln2->disconnect_wq);
+
+ return ret;
+}
+
+int dln2_transfer(struct platform_device *pdev, u16 cmd,
+ const void *obuf, unsigned obuf_len,
+ void *ibuf, unsigned *ibuf_len)
+{
+ struct dln2_platform_data *dln2_pdata;
+ struct dln2_dev *dln2;
+ u16 handle;
+
+ dln2 = dev_get_drvdata(pdev->dev.parent);
+ dln2_pdata = dev_get_platdata(&pdev->dev);
+ handle = dln2_pdata->handle;
+
+ return _dln2_transfer(dln2, handle, cmd, obuf, obuf_len, ibuf,
+ ibuf_len);
+}
+EXPORT_SYMBOL(dln2_transfer);
+
+static int dln2_check_hw(struct dln2_dev *dln2)
+{
+ int ret;
+ __le32 hw_type;
+ int len = sizeof(hw_type);
+
+ ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_VER,
+ NULL, 0, &hw_type, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(hw_type))
+ return -EREMOTEIO;
+
+ if (le32_to_cpu(hw_type) != DLN2_HW_ID) {
+ dev_err(&dln2->interface->dev, "Device ID 0x%x not supported\n",
+ le32_to_cpu(hw_type));
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int dln2_print_serialno(struct dln2_dev *dln2)
+{
+ int ret;
+ __le32 serial_no;
+ int len = sizeof(serial_no);
+ struct device *dev = &dln2->interface->dev;
+
+ ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_SN, NULL, 0,
+ &serial_no, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(serial_no))
+ return -EREMOTEIO;
+
+ dev_info(dev, "Diolan DLN2 serial %u\n", le32_to_cpu(serial_no));
+
+ return 0;
+}
+
+static int dln2_hw_init(struct dln2_dev *dln2)
+{
+ int ret;
+
+ ret = dln2_check_hw(dln2);
+ if (ret < 0)
+ return ret;
+
+ return dln2_print_serialno(dln2);
+}
+
+static void dln2_free_rx_urbs(struct dln2_dev *dln2)
+{
+ int i;
+
+ for (i = 0; i < DLN2_MAX_URBS; i++) {
+ usb_kill_urb(dln2->rx_urb[i]);
+ usb_free_urb(dln2->rx_urb[i]);
+ kfree(dln2->rx_buf[i]);
+ }
+}
+
+static void dln2_free(struct dln2_dev *dln2)
+{
+ dln2_free_rx_urbs(dln2);
+ usb_put_dev(dln2->usb_dev);
+ kfree(dln2);
+}
+
+static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
+ struct usb_host_interface *hostif)
+{
+ int i;
+ int ret;
+ const int rx_max_size = DLN2_RX_BUF_SIZE;
+ struct device *dev = &dln2->interface->dev;
+
+ for (i = 0; i < DLN2_MAX_URBS; i++) {
+ dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL);
+ if (!dln2->rx_buf[i])
+ return -ENOMEM;
+
+ dln2->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dln2->rx_urb[i])
+ return -ENOMEM;
+
+ usb_fill_bulk_urb(dln2->rx_urb[i], dln2->usb_dev,
+ usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in),
+ dln2->rx_buf[i], rx_max_size, dln2_rx, dln2);
+
+ ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
+ if (ret < 0) {
+ dev_err(dev, "failed to submit RX URB: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static struct dln2_platform_data dln2_pdata_gpio = {
+ .handle = DLN2_HANDLE_GPIO,
+};
+
+/* Only one I2C port seems to be supported on current hardware */
+static struct dln2_platform_data dln2_pdata_i2c = {
+ .handle = DLN2_HANDLE_I2C,
+ .port = 0,
+};
+
+/* Only one SPI port supported */
+static struct dln2_platform_data dln2_pdata_spi = {
+ .handle = DLN2_HANDLE_SPI,
+ .port = 0,
+};
+
+static const struct mfd_cell dln2_devs[] = {
+ {
+ .name = "dln2-gpio",
+ .platform_data = &dln2_pdata_gpio,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
+ {
+ .name = "dln2-i2c",
+ .platform_data = &dln2_pdata_i2c,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
+ {
+ .name = "dln2-spi",
+ .platform_data = &dln2_pdata_spi,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
+};
+
+static void dln2_disconnect(struct usb_interface *interface)
+{
+ struct dln2_dev *dln2 = usb_get_intfdata(interface);
+ int i, j;
+
+ /* don't allow starting new transfers */
+ spin_lock(&dln2->disconnect_lock);
+ dln2->disconnect = true;
+ spin_unlock(&dln2->disconnect_lock);
+
+ /* cancel in progress transfers */
+ for (i = 0; i < DLN2_HANDLES; i++) {
+ struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[i];
+ unsigned long flags;
+
+ spin_lock_irqsave(&rxs->lock, flags);
+
+ /* cancel all response waiters */
+ for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) {
+ struct dln2_rx_context *rxc = &rxs->slots[j];
+
+ if (rxc->in_use)
+ complete(&rxc->done);
+ }
+
+ spin_unlock_irqrestore(&rxs->lock, flags);
+ }
+
+ /* wait for transfers to end */
+ wait_event(dln2->disconnect_wq, !dln2->active_transfers);
+
+ mfd_remove_devices(&interface->dev);
+
+ dln2_free(dln2);
+}
+
+static int dln2_probe(struct usb_interface *interface,
+ const struct usb_device_id *usb_id)
+{
+ struct usb_host_interface *hostif = interface->cur_altsetting;
+ struct device *dev = &interface->dev;
+ struct dln2_dev *dln2;
+ int ret;
+ int i, j;
+
+ if (hostif->desc.bInterfaceNumber != 0 ||
+ hostif->desc.bNumEndpoints < 2)
+ return -ENODEV;
+
+ dln2 = kzalloc(sizeof(*dln2), GFP_KERNEL);
+ if (!dln2)
+ return -ENOMEM;
+
+ dln2->ep_out = hostif->endpoint[0].desc.bEndpointAddress;
+ dln2->ep_in = hostif->endpoint[1].desc.bEndpointAddress;
+ dln2->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+ dln2->interface = interface;
+ usb_set_intfdata(interface, dln2);
+ init_waitqueue_head(&dln2->disconnect_wq);
+
+ for (i = 0; i < DLN2_HANDLES; i++) {
+ init_waitqueue_head(&dln2->mod_rx_slots[i].wq);
+ spin_lock_init(&dln2->mod_rx_slots[i].lock);
+ for (j = 0; j < DLN2_MAX_RX_SLOTS; j++)
+ init_completion(&dln2->mod_rx_slots[i].slots[j].done);
+ }
+
+ spin_lock_init(&dln2->event_cb_lock);
+ spin_lock_init(&dln2->disconnect_lock);
+ INIT_LIST_HEAD(&dln2->event_cb_list);
+
+ ret = dln2_setup_rx_urbs(dln2, hostif);
+ if (ret)
+ goto out_cleanup;
+
+ ret = dln2_hw_init(dln2);
+ if (ret < 0) {
+ dev_err(dev, "failed to initialize hardware\n");
+ goto out_cleanup;
+ }
+
+ ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs));
+ if (ret != 0) {
+ dev_err(dev, "failed to add mfd devices to core\n");
+ goto out_cleanup;
+ }
+
+ return 0;
+
+out_cleanup:
+ dln2_free(dln2);
+
+ return ret;
+}
+
+static const struct usb_device_id dln2_table[] = {
+ { USB_DEVICE(0xa257, 0x2013) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, dln2_table);
+
+static struct usb_driver dln2_driver = {
+ .name = "dln2",
+ .probe = dln2_probe,
+ .disconnect = dln2_disconnect,
+ .id_table = dln2_table,
+};
+
+module_usb_driver(dln2_driver);
+
+MODULE_AUTHOR("Octavian Purdila <octavian.purdila@intel.com>");
+MODULE_DESCRIPTION("Core driver for the Diolan DLN2 interface adapter");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index c980da479a35..5c38df35a84d 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -193,11 +193,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
}
- ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
- if (ret)
- mfd_remove_devices(&dev->dev);
-
- return ret;
+ return mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
}
static void lpc_sch_remove(struct pci_dev *dev)
diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index de96b7fb1f6d..3bf8def82f1e 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -1,7 +1,7 @@
/*
* max14577.c - mfd core driver for the Maxim 14577/77836
*
- * Copyright (C) 2014 Samsung Electrnoics
+ * Copyright (C) 2014 Samsung Electronics
* Chanwoo Choi <cw00.choi@samsung.com>
* Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index 711773e8e64b..a159593e27a0 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -43,9 +43,15 @@
static const struct mfd_cell max77693_devs[] = {
{ .name = "max77693-pmic", },
- { .name = "max77693-charger", },
+ {
+ .name = "max77693-charger",
+ .of_compatible = "maxim,max77693-charger",
+ },
{ .name = "max77693-muic", },
- { .name = "max77693-haptic", },
+ {
+ .name = "max77693-haptic",
+ .of_compatible = "maxim,max77693-haptic",
+ },
{
.name = "max77693-flash",
.of_compatible = "maxim,max77693-flash",
@@ -147,6 +153,12 @@ static const struct regmap_irq_chip max77693_muic_irq_chip = {
.num_irqs = ARRAY_SIZE(max77693_muic_irqs),
};
+static const struct regmap_config max77693_regmap_haptic_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77693_HAPTIC_REG_END,
+};
+
static int max77693_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -196,6 +208,15 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
}
i2c_set_clientdata(max77693->haptic, max77693);
+ max77693->regmap_haptic = devm_regmap_init_i2c(max77693->haptic,
+ &max77693_regmap_haptic_config);
+ if (IS_ERR(max77693->regmap_haptic)) {
+ ret = PTR_ERR(max77693->regmap_haptic);
+ dev_err(max77693->dev,
+ "failed to initialize haptic register map: %d\n", ret);
+ goto err_regmap;
+ }
+
/*
* Initialize register map for MUIC device because use regmap-muic
* instance of MUIC device when irq of max77693 is initialized
@@ -207,7 +228,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(max77693->regmap_muic);
dev_err(max77693->dev,
"failed to allocate register map: %d\n", ret);
- goto err_regmap_muic;
+ goto err_regmap;
}
ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
@@ -217,7 +238,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
&max77693->irq_data_led);
if (ret) {
dev_err(max77693->dev, "failed to add irq chip: %d\n", ret);
- goto err_regmap_muic;
+ goto err_regmap;
}
ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
@@ -280,7 +301,7 @@ err_irq_charger:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
err_irq_topsys:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);
-err_regmap_muic:
+err_regmap:
i2c_unregister_device(max77693->haptic);
err_i2c_haptic:
i2c_unregister_device(max77693->muic);
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index f3338fe9d069..2a87f69be53d 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -125,9 +125,15 @@ static int mfd_add_device(struct device *parent, int id,
struct platform_device *pdev;
struct device_node *np = NULL;
int ret = -ENOMEM;
+ int platform_id;
int r;
- pdev = platform_device_alloc(cell->name, id + cell->id);
+ if (id < 0)
+ platform_id = id;
+ else
+ platform_id = id + cell->id;
+
+ pdev = platform_device_alloc(cell->name, platform_id);
if (!pdev)
goto fail_alloc;
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index 9c8eec80ceed..32407404d838 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -130,6 +130,12 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
{
+ int err;
+
+ err = rtsx_gops_pm_reset(pcr);
+ if (err < 0)
+ return err;
+
/* Optimize RX sensitivity */
return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
}
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 573de7bfcced..cf425cc959d5 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -130,6 +130,10 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
{
int err;
+ err = rtsx_gops_pm_reset(pcr);
+ if (err < 0)
+ return err;
+
err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
diff --git a/drivers/mfd/rtsx_gops.c b/drivers/mfd/rtsx_gops.c
new file mode 100644
index 000000000000..b1a98c678593
--- /dev/null
+++ b/drivers/mfd/rtsx_gops.c
@@ -0,0 +1,37 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Micky Ching <micky_ching@realsil.com.cn>
+ */
+
+#include <linux/mfd/rtsx_pci.h>
+#include "rtsx_pcr.h"
+
+int rtsx_gops_pm_reset(struct rtsx_pcr *pcr)
+{
+ int err;
+
+ /* init aspm */
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0x00);
+ err = rtsx_pci_update_cfg_byte(pcr, LCTLR, ~LCTLR_ASPM_CTL_MASK, 0x00);
+ if (err < 0)
+ return err;
+
+ /* reset PM_CTRL3 before send buffer cmd */
+ return rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00);
+}
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index 07e4c2ebf05a..fe2bbb67defc 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -72,4 +72,7 @@ do { \
pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \
} while (0)
+/* generic operations */
+int rtsx_gops_pm_reset(struct rtsx_pcr *pcr);
+
#endif
diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c
index 9cf98d142d9a..dbdd0faeb6ce 100644
--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -647,8 +647,8 @@ static int rtsx_usb_probe(struct usb_interface *intf,
/* initialize USB SG transfer timer */
setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
- ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells,
- ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL);
+ ret = mfd_add_hotplug_devices(&intf->dev, rtsx_usb_cells,
+ ARRAY_SIZE(rtsx_usb_cells));
if (ret)
goto out_init_fail;
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index dba7e2b6f8e9..0a7bc43db4e4 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -27,11 +27,11 @@
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/s2mpa01.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
-#include <linux/regulator/machine.h>
#include <linux/regmap.h>
static const struct mfd_cell s5m8751_devs[] = {
@@ -74,6 +74,15 @@ static const struct mfd_cell s2mps11_devs[] = {
}
};
+static const struct mfd_cell s2mps13_devs[] = {
+ { .name = "s2mps13-pmic", },
+ { .name = "s2mps13-rtc", },
+ {
+ .name = "s2mps13-clk",
+ .of_compatible = "samsung,s2mps13-clk",
+ },
+};
+
static const struct mfd_cell s2mps14_devs[] = {
{
.name = "s2mps14-pmic",
@@ -108,6 +117,9 @@ static const struct of_device_id sec_dt_match[] = {
.compatible = "samsung,s2mps11-pmic",
.data = (void *)S2MPS11X,
}, {
+ .compatible = "samsung,s2mps13-pmic",
+ .data = (void *)S2MPS13X,
+ }, {
.compatible = "samsung,s2mps14-pmic",
.data = (void *)S2MPS14X,
}, {
@@ -194,6 +206,15 @@ static const struct regmap_config s2mps11_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
+static const struct regmap_config s2mps13_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = S2MPS13_REG_LDODSCH5,
+ .volatile_reg = s2mps11_volatile,
+ .cache_type = REGCACHE_FLAT,
+};
+
static const struct regmap_config s2mps14_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -325,6 +346,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
case S2MPS11X:
regmap = &s2mps11_regmap_config;
break;
+ case S2MPS13X:
+ regmap = &s2mps13_regmap_config;
+ break;
case S2MPS14X:
regmap = &s2mps14_regmap_config;
break;
@@ -378,6 +402,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
sec_devs = s2mps11_devs;
num_sec_devs = ARRAY_SIZE(s2mps11_devs);
break;
+ case S2MPS13X:
+ sec_devs = s2mps13_devs;
+ num_sec_devs = ARRAY_SIZE(s2mps13_devs);
+ break;
case S2MPS14X:
sec_devs = s2mps14_devs;
num_sec_devs = ARRAY_SIZE(s2mps14_devs);
@@ -432,15 +460,6 @@ static int sec_pmic_suspend(struct device *dev)
*/
disable_irq(sec_pmic->irq);
- switch (sec_pmic->device_type) {
- case S2MPS14X:
- case S2MPU02:
- regulator_suspend_prepare(PM_SUSPEND_MEM);
- break;
- default:
- break;
- }
-
return 0;
}
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index f9a57869e3ec..ba86a918c2da 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -389,14 +389,22 @@ static const struct regmap_irq_chip s2mps11_irq_chip = {
.ack_base = S2MPS11_REG_INT1,
};
+#define S2MPS1X_IRQ_CHIP_COMMON_DATA \
+ .irqs = s2mps14_irqs, \
+ .num_irqs = ARRAY_SIZE(s2mps14_irqs), \
+ .num_regs = 3, \
+ .status_base = S2MPS14_REG_INT1, \
+ .mask_base = S2MPS14_REG_INT1M, \
+ .ack_base = S2MPS14_REG_INT1 \
+
+static const struct regmap_irq_chip s2mps13_irq_chip = {
+ .name = "s2mps13",
+ S2MPS1X_IRQ_CHIP_COMMON_DATA,
+};
+
static const struct regmap_irq_chip s2mps14_irq_chip = {
.name = "s2mps14",
- .irqs = s2mps14_irqs,
- .num_irqs = ARRAY_SIZE(s2mps14_irqs),
- .num_regs = 3,
- .status_base = S2MPS14_REG_INT1,
- .mask_base = S2MPS14_REG_INT1M,
- .ack_base = S2MPS14_REG_INT1,
+ S2MPS1X_IRQ_CHIP_COMMON_DATA,
};
static const struct regmap_irq_chip s2mpu02_irq_chip = {
@@ -452,6 +460,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
case S2MPS11X:
sec_irq_chip = &s2mps11_irq_chip;
break;
+ case S2MPS13X:
+ sec_irq_chip = &s2mps13_irq_chip;
+ break;
case S2MPS14X:
sec_irq_chip = &s2mps14_irq_chip;
break;
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index ca15878ce5c0..72373b113885 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -15,6 +15,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
@@ -22,31 +23,94 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
static struct platform_driver syscon_driver;
+static DEFINE_SPINLOCK(syscon_list_slock);
+static LIST_HEAD(syscon_list);
+
struct syscon {
+ struct device_node *np;
struct regmap *regmap;
+ struct list_head list;
+};
+
+static struct regmap_config syscon_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
};
-static int syscon_match_node(struct device *dev, void *data)
+static struct syscon *of_syscon_register(struct device_node *np)
{
- struct device_node *dn = data;
+ struct syscon *syscon;
+ struct regmap *regmap;
+ void __iomem *base;
+ int ret;
+ struct regmap_config syscon_config = syscon_regmap_config;
+
+ if (!of_device_is_compatible(np, "syscon"))
+ return ERR_PTR(-EINVAL);
+
+ syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
+ if (!syscon)
+ return ERR_PTR(-ENOMEM);
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ ret = -ENOMEM;
+ goto err_map;
+ }
+
+ /* Parse the device's DT node for an endianness specification */
+ if (of_property_read_bool(np, "big-endian"))
+ syscon_config.val_format_endian = REGMAP_ENDIAN_BIG;
+ else if (of_property_read_bool(np, "little-endian"))
+ syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
+
+ regmap = regmap_init_mmio(NULL, base, &syscon_config);
+ if (IS_ERR(regmap)) {
+ pr_err("regmap init failed\n");
+ ret = PTR_ERR(regmap);
+ goto err_regmap;
+ }
+
+ syscon->regmap = regmap;
+ syscon->np = np;
+
+ spin_lock(&syscon_list_slock);
+ list_add_tail(&syscon->list, &syscon_list);
+ spin_unlock(&syscon_list_slock);
- return (dev->of_node == dn) ? 1 : 0;
+ return syscon;
+
+err_regmap:
+ iounmap(base);
+err_map:
+ kfree(syscon);
+ return ERR_PTR(ret);
}
struct regmap *syscon_node_to_regmap(struct device_node *np)
{
- struct syscon *syscon;
- struct device *dev;
+ struct syscon *entry, *syscon = NULL;
- dev = driver_find_device(&syscon_driver.driver, NULL, np,
- syscon_match_node);
- if (!dev)
- return ERR_PTR(-EPROBE_DEFER);
+ spin_lock(&syscon_list_slock);
- syscon = dev_get_drvdata(dev);
+ list_for_each_entry(entry, &syscon_list, list)
+ if (entry->np == np) {
+ syscon = entry;
+ break;
+ }
+
+ spin_unlock(&syscon_list_slock);
+
+ if (!syscon)
+ syscon = of_syscon_register(np);
+
+ if (IS_ERR(syscon))
+ return ERR_CAST(syscon);
return syscon->regmap;
}
@@ -110,17 +174,6 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
}
EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle);
-static const struct of_device_id of_syscon_match[] = {
- { .compatible = "syscon", },
- { },
-};
-
-static struct regmap_config syscon_regmap_config = {
- .reg_bits = 32,
- .val_bits = 32,
- .reg_stride = 4,
-};
-
static int syscon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -167,7 +220,6 @@ static struct platform_driver syscon_driver = {
.driver = {
.name = "syscon",
.owner = THIS_MODULE,
- .of_match_table = of_syscon_match,
},
.probe = syscon_probe,
.id_table = syscon_ids,
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 9e04a7485981..439d905bb219 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -87,7 +87,7 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc)
unsigned long flags;
u8 dev_ctl;
- clk_enable(t7l66xb->clk32k);
+ clk_prepare_enable(t7l66xb->clk32k);
spin_lock_irqsave(&t7l66xb->lock, flags);
@@ -118,7 +118,7 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
spin_unlock_irqrestore(&t7l66xb->lock, flags);
- clk_disable(t7l66xb->clk32k);
+ clk_disable_unprepare(t7l66xb->clk32k);
return 0;
}
@@ -285,7 +285,7 @@ static int t7l66xb_suspend(struct platform_device *dev, pm_message_t state)
if (pdata && pdata->suspend)
pdata->suspend(dev);
- clk_disable(t7l66xb->clk48m);
+ clk_disable_unprepare(t7l66xb->clk48m);
return 0;
}
@@ -295,7 +295,7 @@ static int t7l66xb_resume(struct platform_device *dev)
struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
struct t7l66xb_platform_data *pdata = dev_get_platdata(&dev->dev);
- clk_enable(t7l66xb->clk48m);
+ clk_prepare_enable(t7l66xb->clk48m);
if (pdata && pdata->resume)
pdata->resume(dev);
@@ -369,7 +369,7 @@ static int t7l66xb_probe(struct platform_device *dev)
goto err_ioremap;
}
- clk_enable(t7l66xb->clk48m);
+ clk_prepare_enable(t7l66xb->clk48m);
if (pdata && pdata->enable)
pdata->enable(dev);
@@ -414,9 +414,9 @@ static int t7l66xb_remove(struct platform_device *dev)
int ret;
ret = pdata->disable(dev);
- clk_disable(t7l66xb->clk48m);
+ clk_disable_unprepare(t7l66xb->clk48m);
clk_put(t7l66xb->clk48m);
- clk_disable(t7l66xb->clk32k);
+ clk_disable_unprepare(t7l66xb->clk32k);
clk_put(t7l66xb->clk32k);
t7l66xb_detach_irq(dev);
iounmap(t7l66xb->scr);
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index 0072e668c208..aacb3720065c 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -241,10 +241,8 @@ static struct irq_domain_ops tc3589x_irq_ops = {
static int tc3589x_irq_init(struct tc3589x *tc3589x, struct device_node *np)
{
- int base = tc3589x->irq_base;
-
tc3589x->domain = irq_domain_add_simple(
- np, TC3589x_NR_INTERNAL_IRQS, base,
+ np, TC3589x_NR_INTERNAL_IRQS, 0,
&tc3589x_irq_ops, tc3589x);
if (!tc3589x->domain) {
@@ -298,7 +296,7 @@ static int tc3589x_device_init(struct tc3589x *tc3589x)
if (blocks & TC3589x_BLOCK_GPIO) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio,
ARRAY_SIZE(tc3589x_dev_gpio), NULL,
- tc3589x->irq_base, tc3589x->domain);
+ 0, tc3589x->domain);
if (ret) {
dev_err(tc3589x->dev, "failed to add gpio child\n");
return ret;
@@ -309,7 +307,7 @@ static int tc3589x_device_init(struct tc3589x *tc3589x)
if (blocks & TC3589x_BLOCK_KEYPAD) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
ARRAY_SIZE(tc3589x_dev_keypad), NULL,
- tc3589x->irq_base, tc3589x->domain);
+ 0, tc3589x->domain);
if (ret) {
dev_err(tc3589x->dev, "failed to keypad child\n");
return ret;
@@ -404,7 +402,6 @@ static int tc3589x_probe(struct i2c_client *i2c,
tc3589x->dev = &i2c->dev;
tc3589x->i2c = i2c;
tc3589x->pdata = pdata;
- tc3589x->irq_base = pdata->irq_base;
switch (version) {
case TC3589X_TC35893:
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index e71f88000ae5..85fab3729102 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -52,7 +52,7 @@ static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state)
if (pdata && pdata->suspend)
pdata->suspend(dev);
- clk_disable(tc6387xb->clk32k);
+ clk_disable_unprepare(tc6387xb->clk32k);
return 0;
}
@@ -62,7 +62,7 @@ static int tc6387xb_resume(struct platform_device *dev)
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
struct tc6387xb_platform_data *pdata = dev_get_platdata(&dev->dev);
- clk_enable(tc6387xb->clk32k);
+ clk_prepare_enable(tc6387xb->clk32k);
if (pdata && pdata->resume)
pdata->resume(dev);
@@ -100,7 +100,7 @@ static int tc6387xb_mmc_enable(struct platform_device *mmc)
struct platform_device *dev = to_platform_device(mmc->dev.parent);
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_enable(tc6387xb->clk32k);
+ clk_prepare_enable(tc6387xb->clk32k);
tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0,
tc6387xb_mmc_resources[0].start & 0xfffe);
@@ -113,7 +113,7 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc)
struct platform_device *dev = to_platform_device(mmc->dev.parent);
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_disable(tc6387xb->clk32k);
+ clk_disable_unprepare(tc6387xb->clk32k);
return 0;
}
@@ -214,7 +214,7 @@ static int tc6387xb_remove(struct platform_device *dev)
mfd_remove_devices(&dev->dev);
iounmap(tc6387xb->scr);
release_resource(&tc6387xb->rscr);
- clk_disable(tc6387xb->clk32k);
+ clk_disable_unprepare(tc6387xb->clk32k);
clk_put(tc6387xb->clk32k);
kfree(tc6387xb);
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 4fac16bcd732..d35f11fbeab7 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -263,6 +263,17 @@ static int tc6393xb_ohci_disable(struct platform_device *dev)
return 0;
}
+static int tc6393xb_ohci_suspend(struct platform_device *dev)
+{
+ struct tc6393xb_platform_data *tcpd = dev_get_platdata(dev->dev.parent);
+
+ /* We can't properly store/restore OHCI state, so fail here */
+ if (tcpd->resume_restore)
+ return -EBUSY;
+
+ return tc6393xb_ohci_disable(dev);
+}
+
static int tc6393xb_fb_enable(struct platform_device *dev)
{
struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent);
@@ -403,7 +414,7 @@ static struct mfd_cell tc6393xb_cells[] = {
.num_resources = ARRAY_SIZE(tc6393xb_ohci_resources),
.resources = tc6393xb_ohci_resources,
.enable = tc6393xb_ohci_enable,
- .suspend = tc6393xb_ohci_disable,
+ .suspend = tc6393xb_ohci_suspend,
.resume = tc6393xb_ohci_enable,
.disable = tc6393xb_ohci_disable,
},
@@ -654,7 +665,7 @@ static int tc6393xb_probe(struct platform_device *dev)
goto err_ioremap;
}
- ret = clk_enable(tc6393xb->clk);
+ ret = clk_prepare_enable(tc6393xb->clk);
if (ret)
goto err_clk_enable;
@@ -717,7 +728,7 @@ err_gpio_add:
gpiochip_remove(&tc6393xb->gpio);
tcpd->disable(dev);
err_enable:
- clk_disable(tc6393xb->clk);
+ clk_disable_unprepare(tc6393xb->clk);
err_clk_enable:
iounmap(tc6393xb->scr);
err_ioremap:
@@ -748,7 +759,7 @@ static int tc6393xb_remove(struct platform_device *dev)
gpiochip_remove(&tc6393xb->gpio);
ret = tcpd->disable(dev);
- clk_disable(tc6393xb->clk);
+ clk_disable_unprepare(tc6393xb->clk);
iounmap(tc6393xb->scr);
release_resource(&tc6393xb->rscr);
clk_put(tc6393xb->clk);
@@ -776,7 +787,7 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
ioread8(tc6393xb->scr + SCR_GPI_BCR(i));
}
ret = tcpd->suspend(dev);
- clk_disable(tc6393xb->clk);
+ clk_disable_unprepare(tc6393xb->clk);
return ret;
}
@@ -788,7 +799,7 @@ static int tc6393xb_resume(struct platform_device *dev)
int ret;
int i;
- clk_enable(tc6393xb->clk);
+ clk_prepare_enable(tc6393xb->clk);
ret = tcpd->resume(dev);
if (ret)
diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
index 1c3e6e2efe41..14b62e11aff4 100644
--- a/drivers/mfd/tps65090.c
+++ b/drivers/mfd/tps65090.c
@@ -76,58 +76,58 @@ static struct mfd_cell tps65090s[] = {
static const struct regmap_irq tps65090_irqs[] = {
/* INT1 IRQs*/
[TPS65090_IRQ_VAC_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE,
},
[TPS65090_IRQ_VSYS_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE,
},
[TPS65090_IRQ_BAT_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE,
},
[TPS65090_IRQ_CHARGING_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE,
},
[TPS65090_IRQ_CHARGING_COMPLETE] = {
- .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE,
+ .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE,
},
[TPS65090_IRQ_OVERLOAD_DCDC1] = {
- .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1,
+ .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1,
},
[TPS65090_IRQ_OVERLOAD_DCDC2] = {
- .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2,
+ .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2,
},
/* INT2 IRQs*/
[TPS65090_IRQ_OVERLOAD_DCDC3] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3,
},
[TPS65090_IRQ_OVERLOAD_FET1] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET1,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET1,
},
[TPS65090_IRQ_OVERLOAD_FET2] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET2,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET2,
},
[TPS65090_IRQ_OVERLOAD_FET3] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET3,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET3,
},
[TPS65090_IRQ_OVERLOAD_FET4] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET4,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET4,
},
[TPS65090_IRQ_OVERLOAD_FET5] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET5,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET5,
},
[TPS65090_IRQ_OVERLOAD_FET6] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET6,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET6,
},
[TPS65090_IRQ_OVERLOAD_FET7] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET7,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET7,
},
};
@@ -176,7 +176,7 @@ MODULE_DEVICE_TABLE(of, tps65090_of_match);
#endif
static int tps65090_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
struct tps65090_platform_data *pdata = dev_get_platdata(&client->dev);
int irq_base = 0;
@@ -210,11 +210,11 @@ static int tps65090_i2c_probe(struct i2c_client *client,
if (client->irq) {
ret = regmap_add_irq_chip(tps65090->rmap, client->irq,
- IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base,
- &tps65090_irq_chip, &tps65090->irq_data);
- if (ret) {
- dev_err(&client->dev,
- "IRQ init failed with err: %d\n", ret);
+ IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base,
+ &tps65090_irq_chip, &tps65090->irq_data);
+ if (ret) {
+ dev_err(&client->dev,
+ "IRQ init failed with err: %d\n", ret);
return ret;
}
} else {
@@ -223,8 +223,8 @@ static int tps65090_i2c_probe(struct i2c_client *client,
}
ret = mfd_add_devices(tps65090->dev, -1, tps65090s,
- ARRAY_SIZE(tps65090s), NULL,
- 0, regmap_irq_get_domain(tps65090->irq_data));
+ ARRAY_SIZE(tps65090s), NULL,
+ 0, regmap_irq_get_domain(tps65090->irq_data));
if (ret) {
dev_err(&client->dev, "add mfd devices failed with err: %d\n",
ret);
diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c
index a8ee52c95f2f..80a919a8ca97 100644
--- a/drivers/mfd/tps65217.c
+++ b/drivers/mfd/tps65217.c
@@ -33,9 +33,11 @@
static const struct mfd_cell tps65217s[] = {
{
.name = "tps65217-pmic",
+ .of_compatible = "ti,tps65217-pmic",
},
{
.name = "tps65217-bl",
+ .of_compatible = "ti,tps65217-bl",
},
};
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 50f9091bcd38..7d63e324e6a8 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -831,6 +831,9 @@ static struct twl4030_power_data osc_off_idle = {
static struct of_device_id twl4030_power_of_match[] = {
{
+ .compatible = "ti,twl4030-power",
+ },
+ {
.compatible = "ti,twl4030-power-reset",
.data = &omap3_reset,
},
diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c
index 3c2b8f9e3c84..e6b3c70aeb22 100644
--- a/drivers/mfd/viperboard.c
+++ b/drivers/mfd/viperboard.c
@@ -93,9 +93,8 @@ static int vprbrd_probe(struct usb_interface *interface,
version >> 8, version & 0xff,
vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
- ret = mfd_add_devices(&interface->dev, PLATFORM_DEVID_AUTO,
- vprbrd_devs, ARRAY_SIZE(vprbrd_devs), NULL, 0,
- NULL);
+ ret = mfd_add_hotplug_devices(&interface->dev, vprbrd_devs,
+ ARRAY_SIZE(vprbrd_devs));
if (ret != 0) {
dev_err(&interface->dev, "Failed to add mfd devices to core.");
goto error;
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index d6f35bbf795b..b326a82017ee 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -336,8 +336,6 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */
{ 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */
{ 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */
- { 0x00000225, 0x0400 }, /* R549 - HP Ctrl 1L */
- { 0x00000226, 0x0400 }, /* R550 - HP Ctrl 1R */
{ 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */
{ 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */
{ 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */
@@ -1112,6 +1110,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
case ARIZONA_MIC_BIAS_CTRL_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
@@ -1949,6 +1949,8 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
case ARIZONA_DSP1_SCRATCH_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_HP_DACVAL:
case ARIZONA_MIC_DETECT_3:
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 4642b5b816a0..12cad94b4035 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -895,8 +895,16 @@ static const struct reg_default wm5110_reg_default[] = {
{ 0x00000548, 0x1818 }, /* R1352 - AIF2 Frame Ctrl 2 */
{ 0x00000549, 0x0000 }, /* R1353 - AIF2 Frame Ctrl 3 */
{ 0x0000054A, 0x0001 }, /* R1354 - AIF2 Frame Ctrl 4 */
+ { 0x0000054B, 0x0002 }, /* R1355 - AIF2 Frame Ctrl 5 */
+ { 0x0000054C, 0x0003 }, /* R1356 - AIF2 Frame Ctrl 6 */
+ { 0x0000054D, 0x0004 }, /* R1357 - AIF2 Frame Ctrl 7 */
+ { 0x0000054E, 0x0005 }, /* R1358 - AIF2 Frame Ctrl 8 */
{ 0x00000551, 0x0000 }, /* R1361 - AIF2 Frame Ctrl 11 */
{ 0x00000552, 0x0001 }, /* R1362 - AIF2 Frame Ctrl 12 */
+ { 0x00000553, 0x0002 }, /* R1363 - AIF2 Frame Ctrl 13 */
+ { 0x00000554, 0x0003 }, /* R1364 - AIF2 Frame Ctrl 14 */
+ { 0x00000555, 0x0004 }, /* R1365 - AIF2 Frame Ctrl 15 */
+ { 0x00000556, 0x0005 }, /* R1366 - AIF2 Frame Ctrl 16 */
{ 0x00000559, 0x0000 }, /* R1369 - AIF2 Tx Enables */
{ 0x0000055A, 0x0000 }, /* R1370 - AIF2 Rx Enables */
{ 0x00000580, 0x000C }, /* R1408 - AIF3 BCLK Ctrl */
@@ -1790,6 +1798,8 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
case ARIZONA_MIC_BIAS_CTRL_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
@@ -1934,8 +1944,16 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_AIF2_FRAME_CTRL_2:
case ARIZONA_AIF2_FRAME_CTRL_3:
case ARIZONA_AIF2_FRAME_CTRL_4:
+ case ARIZONA_AIF2_FRAME_CTRL_5:
+ case ARIZONA_AIF2_FRAME_CTRL_6:
+ case ARIZONA_AIF2_FRAME_CTRL_7:
+ case ARIZONA_AIF2_FRAME_CTRL_8:
case ARIZONA_AIF2_FRAME_CTRL_11:
case ARIZONA_AIF2_FRAME_CTRL_12:
+ case ARIZONA_AIF2_FRAME_CTRL_13:
+ case ARIZONA_AIF2_FRAME_CTRL_14:
+ case ARIZONA_AIF2_FRAME_CTRL_15:
+ case ARIZONA_AIF2_FRAME_CTRL_16:
case ARIZONA_AIF2_TX_ENABLES:
case ARIZONA_AIF2_RX_ENABLES:
case ARIZONA_AIF3_BCLK_CTRL:
@@ -2825,6 +2843,8 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
case ARIZONA_MIC_DETECT_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_INPUT_ENABLES_STATUS:
case ARIZONA_OUTPUT_STATUS_1:
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 4ab527f5c53b..f5124a8acad8 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -308,7 +308,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
goto err;
}
- mode = id2 & WM8350_CONF_STS_MASK >> 10;
+ mode = (id2 & WM8350_CONF_STS_MASK) >> 10;
cust_id = id2 & WM8350_CUST_ID_MASK;
chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
dev_info(wm8350->dev,
diff --git a/drivers/mfd/wm8997-tables.c b/drivers/mfd/wm8997-tables.c
index 510da3b52324..c0c25d75aacc 100644
--- a/drivers/mfd/wm8997-tables.c
+++ b/drivers/mfd/wm8997-tables.c
@@ -670,6 +670,7 @@ static const struct reg_default wm8997_reg_default[] = {
{ 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */
{ 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */
{ 0x00000D08, 0xFFFF }, /* R3336 - Interrupt Status 1 Mask */
+ { 0x00000D09, 0xFFFF }, /* R3337 - Interrupt Status 2 Mask */
{ 0x00000D0A, 0xFFFF }, /* R3338 - Interrupt Status 3 Mask */
{ 0x00000D0B, 0xFFFF }, /* R3339 - Interrupt Status 4 Mask */
{ 0x00000D0C, 0xFEFF }, /* R3340 - Interrupt Status 5 Mask */
@@ -886,6 +887,8 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
case ARIZONA_MIC_BIAS_CTRL_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
@@ -1328,6 +1331,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_INTERRUPT_STATUS_4:
case ARIZONA_INTERRUPT_STATUS_5:
case ARIZONA_INTERRUPT_STATUS_1_MASK:
+ case ARIZONA_INTERRUPT_STATUS_2_MASK:
case ARIZONA_INTERRUPT_STATUS_3_MASK:
case ARIZONA_INTERRUPT_STATUS_4_MASK:
case ARIZONA_INTERRUPT_STATUS_5_MASK:
@@ -1477,6 +1481,8 @@ static bool wm8997_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_SAMPLE_RATE_3_STATUS:
case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
case ARIZONA_MIC_DETECT_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_INPUT_ENABLES_STATUS:
case ARIZONA_OUTPUT_STATUS_1:
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 55d7b7b0f2e0..5e061347be93 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -529,13 +529,13 @@ config REGULATOR_S2MPA01
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
- tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator"
+ tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
depends on MFD_SEC_CORE
help
- This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output
- regulator via I2C bus. The chip is comprised of high efficient Buck
- converters including Dual-Phase Buck converter, Buck-Boost converter,
- various LDOs.
+ This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
+ output regulator via I2C bus. The chip is comprised of high efficient
+ Buck converters including Dual-Phase Buck converter, Buck-Boost
+ converter, various LDOs.
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index adab82d5279f..738dc7763d47 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -30,6 +30,7 @@
#include <linux/of_gpio.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
@@ -45,10 +46,10 @@ struct s2mps11_info {
enum sec_device_type dev_type;
/*
- * One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
- * was enabled.
+ * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether
+ * the suspend mode was enabled.
*/
- unsigned long long s2mps14_suspend_state:35;
+ unsigned long long s2mps14_suspend_state:50;
/* Array of size rdev_num with GPIO-s for external sleep control */
int *ext_control_gpio;
@@ -369,12 +370,101 @@ static const struct regulator_desc s2mps11_regulators[] = {
regulator_desc_s2mps11_buck6_10(10, MIN_750_MV, STEP_12_5_MV),
};
+static struct regulator_ops s2mps14_reg_ops;
+
+#define regulator_desc_s2mps13_ldo(num, min, step, min_sel) { \
+ .name = "LDO"#num, \
+ .id = S2MPS13_LDO##num, \
+ .ops = &s2mps14_reg_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .linear_min_sel = min_sel, \
+ .n_voltages = S2MPS14_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPS13_REG_L1CTRL + num - 1, \
+ .vsel_mask = S2MPS14_LDO_VSEL_MASK, \
+ .enable_reg = S2MPS13_REG_L1CTRL + num - 1, \
+ .enable_mask = S2MPS14_ENABLE_MASK \
+}
+
+#define regulator_desc_s2mps13_buck(num, min, step, min_sel) { \
+ .name = "BUCK"#num, \
+ .id = S2MPS13_BUCK##num, \
+ .ops = &s2mps14_reg_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .linear_min_sel = min_sel, \
+ .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
+ .ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \
+ .vsel_reg = S2MPS13_REG_B1OUT + (num - 1) * 2, \
+ .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS13_REG_B1CTRL + (num - 1) * 2, \
+ .enable_mask = S2MPS14_ENABLE_MASK \
+}
+
+static const struct regulator_desc s2mps13_regulators[] = {
+ regulator_desc_s2mps13_ldo(1, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(2, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(3, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(4, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(5, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(6, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(7, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(8, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(9, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(10, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(11, MIN_800_MV, STEP_25_MV, 0x10),
+ regulator_desc_s2mps13_ldo(12, MIN_800_MV, STEP_25_MV, 0x10),
+ regulator_desc_s2mps13_ldo(13, MIN_800_MV, STEP_25_MV, 0x10),
+ regulator_desc_s2mps13_ldo(14, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(15, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(16, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(17, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(18, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(19, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(20, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(21, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(22, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(23, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(24, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(25, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(26, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(27, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(28, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(29, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(30, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(31, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(32, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(33, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(34, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(35, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(36, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(37, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(38, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(39, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(40, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_buck(1, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(2, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(3, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(4, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(5, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(6, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(7, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(8, MIN_1000_MV, STEP_12_5_MV, 0x20),
+ regulator_desc_s2mps13_buck(9, MIN_1000_MV, STEP_12_5_MV, 0x20),
+ regulator_desc_s2mps13_buck(10, MIN_500_MV, STEP_6_25_MV, 0x10),
+};
+
static int s2mps14_regulator_enable(struct regulator_dev *rdev)
{
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int val;
switch (s2mps11->dev_type) {
+ case S2MPS13X:
case S2MPS14X:
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPS14_ENABLE_SUSPEND;
@@ -406,6 +496,7 @@ static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
/* Below LDO should be always on or does not support suspend mode. */
switch (s2mps11->dev_type) {
+ case S2MPS13X:
case S2MPS14X:
switch (rdev_id) {
case S2MPS14_LDO3:
@@ -831,6 +922,10 @@ static int s2mps11_pmic_probe(struct platform_device *pdev)
s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
regulators = s2mps11_regulators;
break;
+ case S2MPS13X:
+ s2mps11->rdev_num = ARRAY_SIZE(s2mps13_regulators);
+ regulators = s2mps13_regulators;
+ break;
case S2MPS14X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
regulators = s2mps14_regulators;
@@ -927,6 +1022,7 @@ out:
static const struct platform_device_id s2mps11_pmic_id[] = {
{ "s2mps11-pmic", S2MPS11X},
+ { "s2mps13-pmic", S2MPS13X},
{ "s2mps14-pmic", S2MPS14X},
{ "s2mpu02-pmic", S2MPU02},
{ },
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index adba89d9c660..689312745b2f 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -12,7 +12,6 @@
int ab8500_sysctrl_read(u16 reg, u8 *value);
int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value);
-void ab8500_restart(char mode, const char *cmd);
#else
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index c0b075f6bc35..aacc10d7789c 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -125,6 +125,8 @@
#define ARIZONA_MIC_BIAS_CTRL_1 0x218
#define ARIZONA_MIC_BIAS_CTRL_2 0x219
#define ARIZONA_MIC_BIAS_CTRL_3 0x21A
+#define ARIZONA_HP_CTRL_1L 0x225
+#define ARIZONA_HP_CTRL_1R 0x226
#define ARIZONA_ACCESSORY_DETECT_MODE_1 0x293
#define ARIZONA_HEADPHONE_DETECT_1 0x29B
#define ARIZONA_HEADPHONE_DETECT_2 0x29C
@@ -279,8 +281,16 @@
#define ARIZONA_AIF2_FRAME_CTRL_2 0x548
#define ARIZONA_AIF2_FRAME_CTRL_3 0x549
#define ARIZONA_AIF2_FRAME_CTRL_4 0x54A
+#define ARIZONA_AIF2_FRAME_CTRL_5 0x54B
+#define ARIZONA_AIF2_FRAME_CTRL_6 0x54C
+#define ARIZONA_AIF2_FRAME_CTRL_7 0x54D
+#define ARIZONA_AIF2_FRAME_CTRL_8 0x54E
#define ARIZONA_AIF2_FRAME_CTRL_11 0x551
#define ARIZONA_AIF2_FRAME_CTRL_12 0x552
+#define ARIZONA_AIF2_FRAME_CTRL_13 0x553
+#define ARIZONA_AIF2_FRAME_CTRL_14 0x554
+#define ARIZONA_AIF2_FRAME_CTRL_15 0x555
+#define ARIZONA_AIF2_FRAME_CTRL_16 0x556
#define ARIZONA_AIF2_TX_ENABLES 0x559
#define ARIZONA_AIF2_RX_ENABLES 0x55A
#define ARIZONA_AIF2_FORCE_WRITE 0x55B
@@ -2245,6 +2255,46 @@
#define ARIZONA_MICB3_ENA_WIDTH 1 /* MICB3_ENA */
/*
+ * R549 (0x225) - HP Ctrl 1L
+ */
+#define ARIZONA_RMV_SHRT_HP1L 0x4000 /* RMV_SHRT_HP1L */
+#define ARIZONA_RMV_SHRT_HP1L_MASK 0x4000 /* RMV_SHRT_HP1L */
+#define ARIZONA_RMV_SHRT_HP1L_SHIFT 14 /* RMV_SHRT_HP1L */
+#define ARIZONA_RMV_SHRT_HP1L_WIDTH 1 /* RMV_SHRT_HP1L */
+#define ARIZONA_HP1L_FLWR 0x0004 /* HP1L_FLWR */
+#define ARIZONA_HP1L_FLWR_MASK 0x0004 /* HP1L_FLWR */
+#define ARIZONA_HP1L_FLWR_SHIFT 2 /* HP1L_FLWR */
+#define ARIZONA_HP1L_FLWR_WIDTH 1 /* HP1L_FLWR */
+#define ARIZONA_HP1L_SHRTI 0x0002 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTI_MASK 0x0002 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTI_SHIFT 1 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTI_WIDTH 1 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTO 0x0001 /* HP1L_SHRTO */
+#define ARIZONA_HP1L_SHRTO_MASK 0x0001 /* HP1L_SHRTO */
+#define ARIZONA_HP1L_SHRTO_SHIFT 0 /* HP1L_SHRTO */
+#define ARIZONA_HP1L_SHRTO_WIDTH 1 /* HP1L_SHRTO */
+
+/*
+ * R550 (0x226) - HP Ctrl 1R
+ */
+#define ARIZONA_RMV_SHRT_HP1R 0x4000 /* RMV_SHRT_HP1R */
+#define ARIZONA_RMV_SHRT_HP1R_MASK 0x4000 /* RMV_SHRT_HP1R */
+#define ARIZONA_RMV_SHRT_HP1R_SHIFT 14 /* RMV_SHRT_HP1R */
+#define ARIZONA_RMV_SHRT_HP1R_WIDTH 1 /* RMV_SHRT_HP1R */
+#define ARIZONA_HP1R_FLWR 0x0004 /* HP1R_FLWR */
+#define ARIZONA_HP1R_FLWR_MASK 0x0004 /* HP1R_FLWR */
+#define ARIZONA_HP1R_FLWR_SHIFT 2 /* HP1R_FLWR */
+#define ARIZONA_HP1R_FLWR_WIDTH 1 /* HP1R_FLWR */
+#define ARIZONA_HP1R_SHRTI 0x0002 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTI_MASK 0x0002 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTI_SHIFT 1 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTI_WIDTH 1 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTO 0x0001 /* HP1R_SHRTO */
+#define ARIZONA_HP1R_SHRTO_MASK 0x0001 /* HP1R_SHRTO */
+#define ARIZONA_HP1R_SHRTO_SHIFT 0 /* HP1R_SHRTO */
+#define ARIZONA_HP1R_SHRTO_WIDTH 1 /* HP1R_SHRTO */
+
+/*
* R659 (0x293) - Accessory Detect Mode 1
*/
#define ARIZONA_ACCDET_SRC 0x2000 /* ACCDET_SRC */
diff --git a/include/linux/mfd/atmel-hlcdc.h b/include/linux/mfd/atmel-hlcdc.h
new file mode 100644
index 000000000000..1279ab1644b5
--- /dev/null
+++ b/include/linux/mfd/atmel-hlcdc.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_MFD_HLCDC_H
+#define __LINUX_MFD_HLCDC_H
+
+#include <linux/clk.h>
+#include <linux/regmap.h>
+
+#define ATMEL_HLCDC_CFG(i) ((i) * 0x4)
+#define ATMEL_HLCDC_SIG_CFG LCDCFG(5)
+#define ATMEL_HLCDC_HSPOL BIT(0)
+#define ATMEL_HLCDC_VSPOL BIT(1)
+#define ATMEL_HLCDC_VSPDLYS BIT(2)
+#define ATMEL_HLCDC_VSPDLYE BIT(3)
+#define ATMEL_HLCDC_DISPPOL BIT(4)
+#define ATMEL_HLCDC_DITHER BIT(6)
+#define ATMEL_HLCDC_DISPDLY BIT(7)
+#define ATMEL_HLCDC_MODE_MASK GENMASK(9, 8)
+#define ATMEL_HLCDC_PP BIT(10)
+#define ATMEL_HLCDC_VSPSU BIT(12)
+#define ATMEL_HLCDC_VSPHO BIT(13)
+#define ATMEL_HLCDC_GUARDTIME_MASK GENMASK(20, 16)
+
+#define ATMEL_HLCDC_EN 0x20
+#define ATMEL_HLCDC_DIS 0x24
+#define ATMEL_HLCDC_SR 0x28
+#define ATMEL_HLCDC_IER 0x2c
+#define ATMEL_HLCDC_IDR 0x30
+#define ATMEL_HLCDC_IMR 0x34
+#define ATMEL_HLCDC_ISR 0x38
+
+#define ATMEL_HLCDC_CLKPOL BIT(0)
+#define ATMEL_HLCDC_CLKSEL BIT(2)
+#define ATMEL_HLCDC_CLKPWMSEL BIT(3)
+#define ATMEL_HLCDC_CGDIS(i) BIT(8 + (i))
+#define ATMEL_HLCDC_CLKDIV_SHFT 16
+#define ATMEL_HLCDC_CLKDIV_MASK GENMASK(23, 16)
+#define ATMEL_HLCDC_CLKDIV(div) ((div - 2) << ATMEL_HLCDC_CLKDIV_SHFT)
+
+#define ATMEL_HLCDC_PIXEL_CLK BIT(0)
+#define ATMEL_HLCDC_SYNC BIT(1)
+#define ATMEL_HLCDC_DISP BIT(2)
+#define ATMEL_HLCDC_PWM BIT(3)
+#define ATMEL_HLCDC_SIP BIT(4)
+
+#define ATMEL_HLCDC_SOF BIT(0)
+#define ATMEL_HLCDC_SYNCDIS BIT(1)
+#define ATMEL_HLCDC_FIFOERR BIT(4)
+#define ATMEL_HLCDC_LAYER_STATUS(x) BIT((x) + 8)
+
+/**
+ * Structure shared by the MFD device and its subdevices.
+ *
+ * @regmap: register map used to access HLCDC IP registers
+ * @periph_clk: the hlcdc peripheral clock
+ * @sys_clk: the hlcdc system clock
+ * @slow_clk: the system slow clk
+ * @irq: the hlcdc irq
+ */
+struct atmel_hlcdc {
+ struct regmap *regmap;
+ struct clk *periph_clk;
+ struct clk *sys_clk;
+ struct clk *slow_clk;
+ int irq;
+};
+
+#endif /* __LINUX_MFD_HLCDC_H */
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index d0e31a2287ac..81589d176ae8 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -14,6 +14,8 @@
enum {
AXP202_ID = 0,
AXP209_ID,
+ AXP288_ID,
+ NR_AXP20X_VARIANTS,
};
#define AXP20X_DATACACHE(m) (0x04 + (m))
@@ -49,11 +51,13 @@ enum {
#define AXP20X_IRQ3_EN 0x42
#define AXP20X_IRQ4_EN 0x43
#define AXP20X_IRQ5_EN 0x44
+#define AXP20X_IRQ6_EN 0x45
#define AXP20X_IRQ1_STATE 0x48
#define AXP20X_IRQ2_STATE 0x49
#define AXP20X_IRQ3_STATE 0x4a
#define AXP20X_IRQ4_STATE 0x4b
#define AXP20X_IRQ5_STATE 0x4c
+#define AXP20X_IRQ6_STATE 0x4d
/* ADC */
#define AXP20X_ACIN_V_ADC_H 0x56
@@ -116,6 +120,15 @@ enum {
#define AXP20X_CC_CTRL 0xb8
#define AXP20X_FG_RES 0xb9
+/* AXP288 specific registers */
+#define AXP288_PMIC_ADC_H 0x56
+#define AXP288_PMIC_ADC_L 0x57
+#define AXP288_ADC_TS_PIN_CTRL 0x84
+
+#define AXP288_PMIC_ADC_EN 0x84
+#define AXP288_FG_TUNE5 0xed
+
+
/* Regulators IDs */
enum {
AXP20X_LDO1 = 0,
@@ -169,12 +182,58 @@ enum {
AXP20X_IRQ_GPIO0_INPUT,
};
+enum axp288_irqs {
+ AXP288_IRQ_VBUS_FALL = 2,
+ AXP288_IRQ_VBUS_RISE,
+ AXP288_IRQ_OV,
+ AXP288_IRQ_FALLING_ALT,
+ AXP288_IRQ_RISING_ALT,
+ AXP288_IRQ_OV_ALT,
+ AXP288_IRQ_DONE = 10,
+ AXP288_IRQ_CHARGING,
+ AXP288_IRQ_SAFE_QUIT,
+ AXP288_IRQ_SAFE_ENTER,
+ AXP288_IRQ_ABSENT,
+ AXP288_IRQ_APPEND,
+ AXP288_IRQ_QWBTU,
+ AXP288_IRQ_WBTU,
+ AXP288_IRQ_QWBTO,
+ AXP288_IRQ_WBTO,
+ AXP288_IRQ_QCBTU,
+ AXP288_IRQ_CBTU,
+ AXP288_IRQ_QCBTO,
+ AXP288_IRQ_CBTO,
+ AXP288_IRQ_WL2,
+ AXP288_IRQ_WL1,
+ AXP288_IRQ_GPADC,
+ AXP288_IRQ_OT = 31,
+ AXP288_IRQ_GPIO0,
+ AXP288_IRQ_GPIO1,
+ AXP288_IRQ_POKO,
+ AXP288_IRQ_POKL,
+ AXP288_IRQ_POKS,
+ AXP288_IRQ_POKN,
+ AXP288_IRQ_POKP,
+ AXP288_IRQ_TIMER,
+ AXP288_IRQ_MV_CHNG,
+ AXP288_IRQ_BC_USB_CHNG,
+};
+
+#define AXP288_TS_ADC_H 0x58
+#define AXP288_TS_ADC_L 0x59
+#define AXP288_GP_ADC_H 0x5a
+#define AXP288_GP_ADC_L 0x5b
+
struct axp20x_dev {
struct device *dev;
struct i2c_client *i2c_client;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
long variant;
+ int nr_cells;
+ struct mfd_cell *cells;
+ const struct regmap_config *regmap_cfg;
+ const struct regmap_irq_chip *regmap_irq_chip;
};
#endif /* __LINUX_MFD_AXP20X_H */
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index 73e1709d4c09..a76bc100bf97 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -111,6 +111,13 @@ extern int mfd_add_devices(struct device *parent, int id,
struct resource *mem_base,
int irq_base, struct irq_domain *irq_domain);
+static inline int mfd_add_hotplug_devices(struct device *parent,
+ const struct mfd_cell *cells, int n_devs)
+{
+ return mfd_add_devices(parent, PLATFORM_DEVID_AUTO, cells, n_devs,
+ NULL, 0, NULL);
+}
+
extern void mfd_remove_devices(struct device *parent);
#endif
diff --git a/include/linux/mfd/dln2.h b/include/linux/mfd/dln2.h
new file mode 100644
index 000000000000..004b24576da8
--- /dev/null
+++ b/include/linux/mfd/dln2.h
@@ -0,0 +1,103 @@
+#ifndef __LINUX_USB_DLN2_H
+#define __LINUX_USB_DLN2_H
+
+#define DLN2_CMD(cmd, id) ((cmd) | ((id) << 8))
+
+struct dln2_platform_data {
+ u16 handle; /* sub-driver handle (internally used only) */
+ u8 port; /* I2C/SPI port */
+};
+
+/**
+ * dln2_event_cb_t - event callback function signature
+ *
+ * @pdev - the sub-device that registered this callback
+ * @echo - the echo header field received in the message
+ * @data - the data payload
+ * @len - the data payload length
+ *
+ * The callback function is called in interrupt context and the data payload is
+ * only valid during the call. If the user needs later access of the data, it
+ * must copy it.
+ */
+
+typedef void (*dln2_event_cb_t)(struct platform_device *pdev, u16 echo,
+ const void *data, int len);
+
+/**
+ * dl2n_register_event_cb - register a callback function for an event
+ *
+ * @pdev - the sub-device that registers the callback
+ * @event - the event for which to register a callback
+ * @event_cb - the callback function
+ *
+ * @return 0 in case of success, negative value in case of error
+ */
+int dln2_register_event_cb(struct platform_device *pdev, u16 event,
+ dln2_event_cb_t event_cb);
+
+/**
+ * dln2_unregister_event_cb - unregister the callback function for an event
+ *
+ * @pdev - the sub-device that registered the callback
+ * @event - the event for which to register a callback
+ */
+void dln2_unregister_event_cb(struct platform_device *pdev, u16 event);
+
+/**
+ * dln2_transfer - issue a DLN2 command and wait for a response and the
+ * associated data
+ *
+ * @pdev - the sub-device which is issuing this transfer
+ * @cmd - the command to be sent to the device
+ * @obuf - the buffer to be sent to the device; it can be NULL if the user
+ * doesn't need to transmit data with this command
+ * @obuf_len - the size of the buffer to be sent to the device
+ * @ibuf - any data associated with the response will be copied here; it can be
+ * NULL if the user doesn't need the response data
+ * @ibuf_len - must be initialized to the input buffer size; it will be modified
+ * to indicate the actual data transferred;
+ *
+ * @return 0 for success, negative value for errors
+ */
+int dln2_transfer(struct platform_device *pdev, u16 cmd,
+ const void *obuf, unsigned obuf_len,
+ void *ibuf, unsigned *ibuf_len);
+
+/**
+ * dln2_transfer_rx - variant of @dln2_transfer() where TX buffer is not needed
+ *
+ * @pdev - the sub-device which is issuing this transfer
+ * @cmd - the command to be sent to the device
+ * @ibuf - any data associated with the response will be copied here; it can be
+ * NULL if the user doesn't need the response data
+ * @ibuf_len - must be initialized to the input buffer size; it will be modified
+ * to indicate the actual data transferred;
+ *
+ * @return 0 for success, negative value for errors
+ */
+
+static inline int dln2_transfer_rx(struct platform_device *pdev, u16 cmd,
+ void *ibuf, unsigned *ibuf_len)
+{
+ return dln2_transfer(pdev, cmd, NULL, 0, ibuf, ibuf_len);
+}
+
+/**
+ * dln2_transfer_tx - variant of @dln2_transfer() where RX buffer is not needed
+ *
+ * @pdev - the sub-device which is issuing this transfer
+ * @cmd - the command to be sent to the device
+ * @obuf - the buffer to be sent to the device; it can be NULL if the
+ * user doesn't need to transmit data with this command
+ * @obuf_len - the size of the buffer to be sent to the device
+ *
+ * @return 0 for success, negative value for errors
+ */
+static inline int dln2_transfer_tx(struct platform_device *pdev, u16 cmd,
+ const void *obuf, unsigned obuf_len)
+{
+ return dln2_transfer(pdev, cmd, obuf, obuf_len, NULL, NULL);
+}
+
+#endif
diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
index 582e67f34054..08dae01258b9 100644
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -26,7 +26,6 @@
#include <linux/i2c.h>
-#define MAX77693_NUM_IRQ_MUIC_REGS 3
#define MAX77693_REG_INVALID (0xff)
/* Slave addr = 0xCC: PMIC, Charger, Flash LED */
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 74346d5e7899..0c12628e91c6 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -558,6 +558,7 @@
#define SD_SAMPLE_POINT_CTL 0xFDA7
#define SD_PUSH_POINT_CTL 0xFDA8
#define SD_CMD0 0xFDA9
+#define SD_CMD_START 0x40
#define SD_CMD1 0xFDAA
#define SD_CMD2 0xFDAB
#define SD_CMD3 0xFDAC
@@ -707,6 +708,14 @@
#define PM_CTRL1 0xFF44
#define PM_CTRL2 0xFF45
#define PM_CTRL3 0xFF46
+#define SDIO_SEND_PME_EN 0x80
+#define FORCE_RC_MODE_ON 0x40
+#define FORCE_RX50_LINK_ON 0x20
+#define D3_DELINK_MODE_EN 0x10
+#define USE_PESRTB_CTL_DELINK 0x08
+#define DELAY_PIN_WAKE 0x04
+#define RESET_PIN_WAKE 0x02
+#define PM_WAKE_EN 0x01
#define PM_CTRL4 0xFF47
/* Memory mapping */
@@ -752,6 +761,14 @@
#define PHY_DUM_REG 0x1F
#define LCTLR 0x80
+#define LCTLR_EXT_SYNC 0x80
+#define LCTLR_COMMON_CLOCK_CFG 0x40
+#define LCTLR_RETRAIN_LINK 0x20
+#define LCTLR_LINK_DISABLE 0x10
+#define LCTLR_RCB 0x08
+#define LCTLR_RESERVED 0x04
+#define LCTLR_ASPM_CTL_MASK 0x03
+
#define PCR_SETTING_REG1 0x724
#define PCR_SETTING_REG2 0x814
#define PCR_SETTING_REG3 0x747
@@ -967,4 +984,24 @@ static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr)
return (u8 *)(pcr->host_cmds_ptr);
}
+static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr,
+ u8 mask, u8 append)
+{
+ int err;
+ u8 val;
+
+ err = pci_read_config_byte(pcr->pci, addr, &val);
+ if (err < 0)
+ return err;
+ return pci_write_config_byte(pcr->pci, addr, (val & mask) | append);
+}
+
+static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
+{
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg, 0xFF, val >> 24);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 1, 0xFF, val >> 16);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 2, 0xFF, val >> 8);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
+}
+
#endif
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 1825edacbda7..3fdb7cfbffb3 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -28,6 +28,7 @@
#define MIN_800_MV 800000
#define MIN_750_MV 750000
#define MIN_600_MV 600000
+#define MIN_500_MV 500000
/* Macros to represent steps for LDO/BUCK */
#define STEP_50_MV 50000
@@ -41,6 +42,7 @@ enum sec_device_type {
S5M8767X,
S2MPA01,
S2MPS11X,
+ S2MPS13X,
S2MPS14X,
S2MPU02,
};
diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h
new file mode 100644
index 000000000000..ce5dda8958fe
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mps13.h
@@ -0,0 +1,186 @@
+/*
+ * s2mps13.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPS13_H
+#define __LINUX_MFD_S2MPS13_H
+
+/* S2MPS13 registers */
+enum s2mps13_reg {
+ S2MPS13_REG_ID,
+ S2MPS13_REG_INT1,
+ S2MPS13_REG_INT2,
+ S2MPS13_REG_INT3,
+ S2MPS13_REG_INT1M,
+ S2MPS13_REG_INT2M,
+ S2MPS13_REG_INT3M,
+ S2MPS13_REG_ST1,
+ S2MPS13_REG_ST2,
+ S2MPS13_REG_PWRONSRC,
+ S2MPS13_REG_OFFSRC,
+ S2MPS13_REG_BU_CHG,
+ S2MPS13_REG_RTCCTRL,
+ S2MPS13_REG_CTRL1,
+ S2MPS13_REG_CTRL2,
+ S2MPS13_REG_RSVD1,
+ S2MPS13_REG_RSVD2,
+ S2MPS13_REG_RSVD3,
+ S2MPS13_REG_RSVD4,
+ S2MPS13_REG_RSVD5,
+ S2MPS13_REG_RSVD6,
+ S2MPS13_REG_CTRL3,
+ S2MPS13_REG_RSVD7,
+ S2MPS13_REG_RSVD8,
+ S2MPS13_REG_WRSTBI,
+ S2MPS13_REG_B1CTRL,
+ S2MPS13_REG_B1OUT,
+ S2MPS13_REG_B2CTRL,
+ S2MPS13_REG_B2OUT,
+ S2MPS13_REG_B3CTRL,
+ S2MPS13_REG_B3OUT,
+ S2MPS13_REG_B4CTRL,
+ S2MPS13_REG_B4OUT,
+ S2MPS13_REG_B5CTRL,
+ S2MPS13_REG_B5OUT,
+ S2MPS13_REG_B6CTRL,
+ S2MPS13_REG_B6OUT,
+ S2MPS13_REG_B7CTRL,
+ S2MPS13_REG_B7OUT,
+ S2MPS13_REG_B8CTRL,
+ S2MPS13_REG_B8OUT,
+ S2MPS13_REG_B9CTRL,
+ S2MPS13_REG_B9OUT,
+ S2MPS13_REG_B10CTRL,
+ S2MPS13_REG_B10OUT,
+ S2MPS13_REG_BB1CTRL,
+ S2MPS13_REG_BB1OUT,
+ S2MPS13_REG_BUCK_RAMP1,
+ S2MPS13_REG_BUCK_RAMP2,
+ S2MPS13_REG_LDO_DVS1,
+ S2MPS13_REG_LDO_DVS2,
+ S2MPS13_REG_LDO_DVS3,
+ S2MPS13_REG_B6OUT2,
+ S2MPS13_REG_L1CTRL,
+ S2MPS13_REG_L2CTRL,
+ S2MPS13_REG_L3CTRL,
+ S2MPS13_REG_L4CTRL,
+ S2MPS13_REG_L5CTRL,
+ S2MPS13_REG_L6CTRL,
+ S2MPS13_REG_L7CTRL,
+ S2MPS13_REG_L8CTRL,
+ S2MPS13_REG_L9CTRL,
+ S2MPS13_REG_L10CTRL,
+ S2MPS13_REG_L11CTRL,
+ S2MPS13_REG_L12CTRL,
+ S2MPS13_REG_L13CTRL,
+ S2MPS13_REG_L14CTRL,
+ S2MPS13_REG_L15CTRL,
+ S2MPS13_REG_L16CTRL,
+ S2MPS13_REG_L17CTRL,
+ S2MPS13_REG_L18CTRL,
+ S2MPS13_REG_L19CTRL,
+ S2MPS13_REG_L20CTRL,
+ S2MPS13_REG_L21CTRL,
+ S2MPS13_REG_L22CTRL,
+ S2MPS13_REG_L23CTRL,
+ S2MPS13_REG_L24CTRL,
+ S2MPS13_REG_L25CTRL,
+ S2MPS13_REG_L26CTRL,
+ S2MPS13_REG_L27CTRL,
+ S2MPS13_REG_L28CTRL,
+ S2MPS13_REG_L30CTRL,
+ S2MPS13_REG_L31CTRL,
+ S2MPS13_REG_L32CTRL,
+ S2MPS13_REG_L33CTRL,
+ S2MPS13_REG_L34CTRL,
+ S2MPS13_REG_L35CTRL,
+ S2MPS13_REG_L36CTRL,
+ S2MPS13_REG_L37CTRL,
+ S2MPS13_REG_L38CTRL,
+ S2MPS13_REG_L39CTRL,
+ S2MPS13_REG_L40CTRL,
+ S2MPS13_REG_LDODSCH1,
+ S2MPS13_REG_LDODSCH2,
+ S2MPS13_REG_LDODSCH3,
+ S2MPS13_REG_LDODSCH4,
+ S2MPS13_REG_LDODSCH5,
+};
+
+/* regulator ids */
+enum s2mps13_regulators {
+ S2MPS13_LDO1,
+ S2MPS13_LDO2,
+ S2MPS13_LDO3,
+ S2MPS13_LDO4,
+ S2MPS13_LDO5,
+ S2MPS13_LDO6,
+ S2MPS13_LDO7,
+ S2MPS13_LDO8,
+ S2MPS13_LDO9,
+ S2MPS13_LDO10,
+ S2MPS13_LDO11,
+ S2MPS13_LDO12,
+ S2MPS13_LDO13,
+ S2MPS13_LDO14,
+ S2MPS13_LDO15,
+ S2MPS13_LDO16,
+ S2MPS13_LDO17,
+ S2MPS13_LDO18,
+ S2MPS13_LDO19,
+ S2MPS13_LDO20,
+ S2MPS13_LDO21,
+ S2MPS13_LDO22,
+ S2MPS13_LDO23,
+ S2MPS13_LDO24,
+ S2MPS13_LDO25,
+ S2MPS13_LDO26,
+ S2MPS13_LDO27,
+ S2MPS13_LDO28,
+ S2MPS13_LDO29,
+ S2MPS13_LDO30,
+ S2MPS13_LDO31,
+ S2MPS13_LDO32,
+ S2MPS13_LDO33,
+ S2MPS13_LDO34,
+ S2MPS13_LDO35,
+ S2MPS13_LDO36,
+ S2MPS13_LDO37,
+ S2MPS13_LDO38,
+ S2MPS13_LDO39,
+ S2MPS13_LDO40,
+ S2MPS13_BUCK1,
+ S2MPS13_BUCK2,
+ S2MPS13_BUCK3,
+ S2MPS13_BUCK4,
+ S2MPS13_BUCK5,
+ S2MPS13_BUCK6,
+ S2MPS13_BUCK7,
+ S2MPS13_BUCK8,
+ S2MPS13_BUCK9,
+ S2MPS13_BUCK10,
+
+ S2MPS13_REGULATOR_MAX,
+};
+
+/*
+ * Default ramp delay in uv/us. Datasheet says that ramp delay can be
+ * controlled however it does not specify which register is used for that.
+ * Let's assume that default value will be set.
+ */
+#define S2MPS13_BUCK_RAMP_DELAY 12500
+
+#endif /* __LINUX_MFD_S2MPS13_H */
diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h
index e6088c2e2092..e1c12d84c26a 100644
--- a/include/linux/mfd/tc3589x.h
+++ b/include/linux/mfd/tc3589x.h
@@ -164,13 +164,10 @@ struct tc3589x_keypad_platform_data {
/**
* struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
- * @gpio_base: first gpio number assigned to TC3589x. A maximum of
- * %TC3589x_NR_GPIOS GPIOs will be allocated.
* @setup: callback for board-specific initialization
* @remove: callback for board-specific teardown
*/
struct tc3589x_gpio_platform_data {
- int gpio_base;
void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base);
void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base);
};
@@ -178,18 +175,13 @@ struct tc3589x_gpio_platform_data {
/**
* struct tc3589x_platform_data - TC3589x platform data
* @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
- * @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used.
* @gpio: GPIO-specific platform data
* @keypad: keypad-specific platform data
*/
struct tc3589x_platform_data {
unsigned int block;
- int irq_base;
struct tc3589x_gpio_platform_data *gpio;
const struct tc3589x_keypad_platform_data *keypad;
};
-#define TC3589x_NR_GPIOS 24
-#define TC3589x_NR_IRQS TC3589x_INT_GPIO(TC3589x_NR_GPIOS)
-
#endif
diff --git a/include/linux/of.h b/include/linux/of.h
index 29f0adc5f3e4..364a15858746 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -922,4 +922,15 @@ static inline int of_changeset_update_property(struct of_changeset *ocs,
/* CONFIG_OF_RESOLVE api */
extern int of_resolve_phandles(struct device_node *tree);
+/**
+ * of_system_has_poweroff_source - Tells if poweroff-source is found for device_node
+ * @np: Pointer to the given device_node
+ *
+ * return true if present false otherwise
+ */
+static inline bool of_system_has_poweroff_source(const struct device_node *np)
+{
+ return of_property_read_bool(np, "poweroff-source");
+}
+
#endif /* _LINUX_OF_H */