diff options
| -rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 103 |
1 files changed, 101 insertions, 2 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index c1511f9244bb..87f450b7c177 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -19,6 +19,8 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/notifier.h> #include <linux/slab.h> #include <linux/acpi.h> #include <linux/clk.h> @@ -43,6 +45,8 @@ struct dw8250_data { int msr_mask_off; struct clk *clk; struct clk *pclk; + struct notifier_block clk_notifier; + struct work_struct clk_work; struct reset_control *rst; unsigned int skip_autocfg:1; @@ -54,6 +58,16 @@ static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) return container_of(data, struct dw8250_data, data); } +static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) +{ + return container_of(nb, struct dw8250_data, clk_notifier); +} + +static inline struct dw8250_data *work_to_dw8250_data(struct work_struct *work) +{ + return container_of(work, struct dw8250_data, clk_work); +} + static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value) { struct dw8250_data *d = to_dw8250_data(p->private_data); @@ -260,6 +274,46 @@ static int dw8250_handle_irq(struct uart_port *p) return 0; } +static void dw8250_clk_work_cb(struct work_struct *work) +{ + struct dw8250_data *d = work_to_dw8250_data(work); + struct uart_8250_port *up; + unsigned long rate; + + rate = clk_get_rate(d->clk); + if (rate <= 0) + return; + + up = serial8250_get_port(d->data.line); + + serial8250_update_uartclk(&up->port, rate); +} + +static int dw8250_clk_notifier_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct dw8250_data *d = clk_to_dw8250_data(nb); + + /* + * We have no choice but to defer the uartclk update due to two + * deadlocks. First one is caused by a recursive mutex lock which + * happens when clk_set_rate() is called from dw8250_set_termios(). + * Second deadlock is more tricky and is caused by an inverted order of + * the clk and tty-port mutexes lock. It happens if clock rate change + * is requested asynchronously while set_termios() is executed between + * tty-port mutex lock and clk_set_rate() function invocation and + * vise-versa. Anyway if we didn't have the reference clock alteration + * in the dw8250_set_termios() method we wouldn't have needed this + * deferred event handling complication. + */ + if (event == POST_RATE_CHANGE) { + queue_work(system_unbound_wq, &d->clk_work); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + static void dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) { @@ -283,9 +337,16 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, clk_disable_unprepare(d->clk); rate = clk_round_rate(d->clk, newrate); if (rate > 0) { + /* + * Premilinary set the uartclk to the new clock rate so the + * clock update event handler caused by the clk_set_rate() + * calling wouldn't actually update the UART divisor since + * we about to do this anyway. + */ + swap(p->uartclk, rate); ret = clk_set_rate(d->clk, newrate); - if (!ret) - p->uartclk = rate; + if (ret) + swap(p->uartclk, rate); } clk_prepare_enable(d->clk); @@ -312,6 +373,39 @@ static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios) serial8250_do_set_ldisc(p, termios); } +static int dw8250_startup(struct uart_port *p) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + int ret; + + /* + * Some platforms may provide a reference clock shared between several + * devices. In this case before using the serial port first we have to + * make sure that any clock state change is known to the UART port at + * least post factum. + */ + if (d->clk) { + ret = clk_notifier_register(d->clk, &d->clk_notifier); + if (ret) + dev_warn(p->dev, "Failed to set the clock notifier\n"); + } + + return serial8250_do_startup(p); +} + +static void dw8250_shutdown(struct uart_port *p) +{ + struct dw8250_data *d = to_dw8250_data(p->private_data); + + serial8250_do_shutdown(p); + + if (d->clk) { + clk_notifier_unregister(d->clk, &d->clk_notifier); + + flush_work(&d->clk_work); + } +} + /* * dw8250_fallback_dma_filter will prevent the UART from getting just any free * channel on platforms that have DMA engines, but don't have any channels @@ -407,6 +501,8 @@ static int dw8250_probe(struct platform_device *pdev) p->serial_out = dw8250_serial_out; p->set_ldisc = dw8250_set_ldisc; p->set_termios = dw8250_set_termios; + p->startup = dw8250_startup; + p->shutdown = dw8250_shutdown; p->membase = devm_ioremap(dev, regs->start, resource_size(regs)); if (!p->membase) @@ -468,6 +564,9 @@ static int dw8250_probe(struct platform_device *pdev) if (IS_ERR(data->clk)) return PTR_ERR(data->clk); + INIT_WORK(&data->clk_work, dw8250_clk_work_cb); + data->clk_notifier.notifier_call = dw8250_clk_notifier_cb; + err = clk_prepare_enable(data->clk); if (err) dev_warn(dev, "could not enable optional baudclk: %d\n", err); |