diff options
-rw-r--r-- | MAINTAINERS | 2 | ||||
-rw-r--r-- | arch/mips/boot/dts/ingenic/ci20.dts | 44 | ||||
-rw-r--r-- | arch/mips/kernel/setup.c | 3 |
3 files changed, 31 insertions, 18 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index a6fbdf354d34..235ab38ed478 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11119,7 +11119,7 @@ M: Thomas Bogendoerfer <tsbogend@alpha.franken.de> L: linux-mips@vger.kernel.org W: http://www.linux-mips.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git -Q: http://patchwork.linux-mips.org/project/linux-mips/list/ +Q: https://patchwork.kernel.org/project/linux-mips/list/ S: Maintained F: Documentation/devicetree/bindings/mips/ F: Documentation/mips/ diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 37b93166bf22..c340f947baa0 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -4,6 +4,8 @@ #include "jz4780.dtsi" #include <dt-bindings/clock/ingenic,tcu.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/regulator/active-semi,8865-regulator.h> / { compatible = "img,ci20", "ingenic,jz4780"; @@ -163,63 +165,71 @@ regulators { vddcore: SUDCDC1 { - regulator-name = "VDDCORE"; + regulator-name = "DCDC_REG1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; vddmem: SUDCDC2 { - regulator-name = "VDDMEM"; + regulator-name = "DCDC_REG2"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; vcc_33: SUDCDC3 { - regulator-name = "VCC33"; + regulator-name = "DCDC_REG3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_50: SUDCDC4 { - regulator-name = "VCC50"; + regulator-name = "SUDCDC_REG4"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; vcc_25: LDO_REG5 { - regulator-name = "VCC25"; + regulator-name = "LDO_REG5"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; wifi_io: LDO_REG6 { - regulator-name = "WIFIIO"; + regulator-name = "LDO_REG6"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; vcc_28: LDO_REG7 { - regulator-name = "VCC28"; + regulator-name = "LDO_REG7"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; vcc_15: LDO_REG8 { - regulator-name = "VCC15"; + regulator-name = "LDO_REG8"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; - vcc_18: LDO_REG9 { - regulator-name = "VCC18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vrtc_18: LDO_REG9 { + regulator-name = "LDO_REG9"; + /* Despite the datasheet stating 3.3V + * for REG9 and the driver expecting that, + * REG9 outputs 1.8V. + * Likely the CI20 uses a proprietary + * factory programmed chip variant. + * Since this is a simple on/off LDO the + * exact values do not matter. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; vcc_11: LDO_REG10 { - regulator-name = "VCC11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-name = "LDO_REG10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; }; }; @@ -261,7 +271,9 @@ rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; - interrupts = <110>; + + interrupt-parent = <&gpf>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 1ac2752fb791..a7b469d89e2c 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -605,7 +605,8 @@ static void __init bootcmdline_init(char **cmdline_p) * If we're configured to take boot arguments from DT, look for those * now. */ - if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)) + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) || + IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND)) of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs); #endif |