summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/pci/ats.c3
-rw-r--r--drivers/pci/controller/dwc/pcie-designware-ep.c2
-rw-r--r--drivers/pci/controller/pcie-rockchip-ep.c1
-rw-r--r--drivers/pci/endpoint/functions/pci-epf-test.c2
-rw-r--r--drivers/pci/endpoint/pci-ep-cfs.c2
-rw-r--r--drivers/pci/endpoint/pci-epc-core.c2
-rw-r--r--drivers/pci/endpoint/pci-epc-mem.c2
-rw-r--r--drivers/pci/endpoint/pci-epf-core.c4
-rw-r--r--drivers/pci/hotplug/acpi_pcihp.c4
-rw-r--r--drivers/pci/hotplug/pciehp_core.c1
-rw-r--r--drivers/pci/of.c2
-rw-r--r--drivers/pci/pci-pf-stub.c2
-rw-r--r--drivers/pci/setup-bus.c1
-rw-r--r--drivers/pci/vc.c1
14 files changed, 18 insertions, 11 deletions
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 647e097530a8..0d3719407b8b 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -188,7 +188,8 @@ void pci_pri_init(struct pci_dev *pdev)
/**
* pci_enable_pri - Enable PRI capability
- * @ pdev: PCI device structure
+ * @pdev: PCI device structure
+ * @reqs: outstanding requests
*
* Returns 0 on success, negative value on error
*/
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 5e5b8821bed8..305bfec2424d 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* Synopsys DesignWare PCIe Endpoint controller driver
*
* Copyright (C) 2017 Texas Instruments
diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c
index 5eaf36629a75..7631dc3961c1 100644
--- a/drivers/pci/controller/pcie-rockchip-ep.c
+++ b/drivers/pci/controller/pcie-rockchip-ep.c
@@ -22,6 +22,7 @@
/**
* struct rockchip_pcie_ep - private data for PCIe endpoint controller driver
* @rockchip: Rockchip PCIe controller
+ * @epc: PCI EPC device
* @max_regions: maximum number of regions supported by hardware
* @ob_region_map: bitmask of mapped outbound regions
* @ob_addr: base addresses in the AXI bus where the outbound regions start
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index c89a9561439f..e4e51d884553 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -181,7 +181,7 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
/**
* pci_epf_test_clean_dma_chan() - Function to cleanup EPF test DMA channel
- * @epf: the EPF test device that performs data transfer operation
+ * @epf_test: the EPF test device that performs data transfer operation
*
* Helper to cleanup EPF test DMA channel.
*/
diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c
index 55edce50be96..3710adf51912 100644
--- a/drivers/pci/endpoint/pci-ep-cfs.c
+++ b/drivers/pci/endpoint/pci-ep-cfs.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* configfs to configure the PCI endpoint
*
* Copyright (C) 2017 Texas Instruments
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index 82ba0dc7f2f5..cadd3db0cbb0 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* PCI Endpoint *Controller* (EPC) library
*
* Copyright (C) 2017 Texas Instruments
diff --git a/drivers/pci/endpoint/pci-epc-mem.c b/drivers/pci/endpoint/pci-epc-mem.c
index 80c46f3a4590..a97b56a6d2db 100644
--- a/drivers/pci/endpoint/pci-epc-mem.c
+++ b/drivers/pci/endpoint/pci-epc-mem.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* PCI Endpoint *Controller* Address Space Management
*
* Copyright (C) 2017 Texas Instruments
diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c
index 244e00f48c5c..c977cf9dce56 100644
--- a/drivers/pci/endpoint/pci-epf-core.c
+++ b/drivers/pci/endpoint/pci-epf-core.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* PCI Endpoint *Function* (EPF) library
*
* Copyright (C) 2017 Texas Instruments
@@ -71,6 +71,7 @@ EXPORT_SYMBOL_GPL(pci_epf_bind);
/**
* pci_epf_free_space() - free the allocated PCI EPF register space
+ * @epf: the EPF device from whom to free the memory
* @addr: the virtual address of the PCI EPF register space
* @bar: the BAR number corresponding to the register space
*
@@ -96,6 +97,7 @@ EXPORT_SYMBOL_GPL(pci_epf_free_space);
/**
* pci_epf_alloc_space() - allocate memory for the PCI EPF register space
+ * @epf: the EPF device to whom allocate the memory
* @size: the size of the memory that has to be allocated
* @bar: the BAR number corresponding to the allocated register space
* @align: alignment size for the allocation region
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index 6b7c1ed58e7e..2750a64cecd3 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -61,7 +61,7 @@ static acpi_status acpi_run_oshp(acpi_handle handle)
/**
* acpi_get_hp_hw_control_from_firmware
- * @dev: the pci_dev of the bridge that has a hotplug controller
+ * @pdev: the pci_dev of the bridge that has a hotplug controller
*
* Attempt to take hotplug control from firmware.
*/
@@ -191,7 +191,7 @@ check_hotplug(acpi_handle handle, u32 lvl, void *context, void **rv)
/**
* acpi_pci_detect_ejectable - check if the PCI bus has ejectable slots
- * @handle - handle of the PCI bus to scan
+ * @handle: handle of the PCI bus to scan
*
* Returns 1 if the PCI bus has ACPI based ejectable slots, 0 otherwise.
*/
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index bf779f291f15..ad3393930ecb 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -153,6 +153,7 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
/**
* pciehp_check_presence() - synthesize event if presence has changed
+ * @ctrl: controller to check
*
* On probe and resume, an explicit presence check is necessary to bring up an
* occupied slot or bring down an unoccupied slot. This can't be triggered by
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index 2ebc5e32e8a0..ac24cd5439a9 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -243,6 +243,8 @@ EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
* @busno: bus number associated with the bridge root bus
* @bus_max: maximum number of buses for this bridge
* @resources: list where the range of resources will be added after DT parsing
+ * @ib_resources: list where the range of inbound resources (with addresses
+ * from 'dma-ranges') will be added after DT parsing
* @io_base: pointer to a variable that will contain on return the physical
* address for the start of the I/O range. Can be NULL if the caller doesn't
* expect I/O ranges to be present in the device tree.
diff --git a/drivers/pci/pci-pf-stub.c b/drivers/pci/pci-pf-stub.c
index ef293e735c55..a0b2bd6c918a 100644
--- a/drivers/pci/pci-pf-stub.c
+++ b/drivers/pci/pci-pf-stub.c
@@ -9,7 +9,7 @@
#include <linux/module.h>
#include <linux/pci.h>
-/**
+/*
* pci_pf_stub_whitelist - White list of devices to bind pci-pf-stub onto
*
* This table provides the list of IDs this driver is supposed to bind
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 4d870ed89385..3951e02b7ded 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -55,6 +55,7 @@ static void free_list(struct list_head *head)
* @dev: Device to which the resource belongs
* @res: Resource to be tracked
* @add_size: Additional size to be optionally added to the resource
+ * @min_align: Minimum memory window alignment
*/
static int add_to_list(struct list_head *head, struct pci_dev *dev,
struct resource *res, resource_size_t add_size,
diff --git a/drivers/pci/vc.c b/drivers/pci/vc.c
index 5486f8768c86..5fc59ac31145 100644
--- a/drivers/pci/vc.c
+++ b/drivers/pci/vc.c
@@ -172,7 +172,6 @@ enable:
* @dev: device
* @pos: starting position of VC capability (VC/VC9/MFVC)
* @save_state: buffer for save/restore
- * @name: for error message
* @save: if provided a buffer, this indicates what to do with it
*
* Walking Virtual Channel config space to size, save, or restore it