diff options
58 files changed, 2319 insertions, 1742 deletions
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 591e94448e63..2a4d77946c7d 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -483,3 +483,10 @@ Why: With the recent innovations in CPU hardware acceleration technologies Who: Alok N Kataria <akataria@vmware.com> ---------------------------- + +What: adt7473 hardware monitoring driver +When: February 2010 +Why: Obsoleted by the adt7475 driver. +Who: Jean Delvare <khali@linux-fr.org> + +--------------------------- diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 index 1cbf671822e2..446612bd1fb9 100644 --- a/Documentation/hwmon/adt7473 +++ b/Documentation/hwmon/adt7473 @@ -9,6 +9,8 @@ Supported chips: Author: Darrick J. Wong +This driver is depreacted, please use the adt7475 driver instead. + Description ----------- diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475 index a2b1abec850e..0502f2b464e1 100644 --- a/Documentation/hwmon/adt7475 +++ b/Documentation/hwmon/adt7475 @@ -1,87 +1,117 @@ -This describes the interface for the ADT7475 driver: - -(there are 4 fans, numbered fan1 to fan4): - -fanX_input Read the current speed of the fan (in RPMs) -fanX_min Read/write the minimum speed of the fan. Dropping - below this sets an alarm. - -(there are three PWMs, numbered pwm1 to pwm3): - -pwmX Read/write the current duty cycle of the PWM. Writes - only have effect when auto mode is turned off (see - below). Range is 0 - 255. - -pwmX_enable Fan speed control method: - - 0 - No control (fan at full speed) - 1 - Manual fan speed control (using pwm[1-*]) - 2 - Automatic fan speed control - -pwmX_auto_channels_temp Select which channels affect this PWM - - 1 - TEMP1 controls PWM - 2 - TEMP2 controls PWM - 4 - TEMP3 controls PWM - 6 - TEMP2 and TEMP3 control PWM - 7 - All three inputs control PWM - -pwmX_freq Read/write the PWM frequency in Hz. The number - should be one of the following: - - 11 Hz - 14 Hz - 22 Hz - 29 Hz - 35 Hz - 44 Hz - 58 Hz - 88 Hz - -pwmX_auto_point1_pwm Read/write the minimum PWM duty cycle in automatic mode - -pwmX_auto_point2_pwm Read/write the maximum PWM duty cycle in automatic mode - -(there are three temperature settings numbered temp1 to temp3): - -tempX_input Read the current temperature. The value is in milli - degrees of Celsius. - -tempX_max Read/write the upper temperature limit - exceeding this - will cause an alarm. - -tempX_min Read/write the lower temperature limit - exceeding this - will cause an alarm. - -tempX_offset Read/write the temperature adjustment offset - -tempX_crit Read/write the THERM limit for remote1. - -tempX_crit_hyst Set the temperature value below crit where the - fans will stay on - this helps drive the temperature - low enough so it doesn't stay near the edge and - cause THERM to keep tripping. - -tempX_auto_point1_temp Read/write the minimum temperature where the fans will - turn on in automatic mode. - -tempX_auto_point2_temp Read/write the maximum temperature over which the fans - will run in automatic mode. tempX_auto_point1_temp - and tempX_auto_point2_temp together define the - range of automatic control. - -tempX_alarm Read a 1 if the max/min alarm is set -tempX_fault Read a 1 if either temp1 or temp3 diode has a fault - -(There are two voltage settings, in1 and in2): - -inX_input Read the current voltage on VCC. Value is in - millivolts. - -inX_min read/write the minimum voltage limit. - Dropping below this causes an alarm. - -inX_max read/write the maximum voltage limit. - Exceeding this causes an alarm. - -inX_alarm Read a 1 if the max/min alarm is set. +Kernel driver adt7475 +===================== + +Supported chips: + * Analog Devices ADT7473 + Prefix: 'adt7473' + Addresses scanned: I2C 0x2C, 0x2D, 0x2E + Datasheet: Publicly available at the On Semiconductors website + * Analog Devices ADT7475 + Prefix: 'adt7475' + Addresses scanned: I2C 0x2E + Datasheet: Publicly available at the On Semiconductors website + * Analog Devices ADT7476 + Prefix: 'adt7476' + Addresses scanned: I2C 0x2C, 0x2D, 0x2E + Datasheet: Publicly available at the On Semiconductors website + * Analog Devices ADT7490 + Prefix: 'adt7490' + Addresses scanned: I2C 0x2C, 0x2D, 0x2E + Datasheet: Publicly available at the On Semiconductors website + +Authors: + Jordan Crouse + Hans de Goede + Darrick J. Wong (documentation) + Jean Delvare + + +Description +----------- + +This driver implements support for the Analog Devices ADT7473, ADT7475, +ADT7476 and ADT7490 chip family. The ADT7473 and ADT7475 differ only in +minor details. The ADT7476 has additional features, including extra voltage +measurement inputs and VID support. The ADT7490 also has additional +features, including extra voltage measurement inputs and PECI support. All +the supported chips will be collectively designed by the name "ADT747x" in +the rest of this document. + +The ADT747x uses the 2-wire interface compatible with the SMBus 2.0 +specification. Using an analog to digital converter it measures three (3) +temperatures and two (2) or more voltages. It has four (4) 16-bit counters +for measuring fan speed. There are three (3) PWM outputs that can be used +to control fan speed. + +A sophisticated control system for the PWM outputs is designed into the +ADT747x that allows fan speed to be adjusted automatically based on any of the +three temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT747x will adjust the PWM outputs in +response to the measured temperatures without further host intervention. +This feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (voltage, temperature, fan speed) has +corresponding high/low limit values. The ADT747x will signal an ALARM if +any measured value exceeds either limit. + +The ADT747x samples all inputs continuously. The driver will not read +the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Chip Differences Summary +------------------------ + +ADT7473: + * 2 voltage inputs + * system acoustics optimizations (not implemented) + +ADT7475: + * 2 voltage inputs + +ADT7476: + * 5 voltage inputs + * VID support + +ADT7490: + * 6 voltage inputs + * 1 Imon input (not implemented) + * PECI support (not implemented) + * 2 GPIO pins (not implemented) + * system acoustics optimizations (not implemented) + +Special Features +---------------- + +The ADT747x has a 10-bit ADC and can therefore measure temperatures +with a resolution of 0.25 degree Celsius. Temperature readings can be +configured either for two's complement format or "Offset 64" format, +wherein 64 is subtracted from the raw value to get the temperature value. + +The datasheet is very detailed and describes a procedure for determining +an optimal configuration for the automatic PWM control. + +Fan Speed Control +----------------- + +The driver exposes two trip points per PWM channel. + +point1: Set the PWM speed at the lower temperature bound +point2: Set the PWM speed at the higher temperature bound + +The ADT747x will scale the PWM linearly between the lower and higher PWM +speed when the temperature is between the two temperature boundaries. +Temperature boundaries are associated to temperature channels rather than +PWM outputs, and a given PWM output can be controlled by several temperature +channels. As a result, the ADT747x may compute more than one PWM value +for a channel at a given time, in which case the maximum value (fastest +fan speed) is applied. PWM values range from 0 (off) to 255 (full speed). + +Fan speed may be set to maximum when the temperature sensor associated with +the PWM control exceeds temp#_max. + +Notes +----- + +The nVidia binary driver presents an ADT7473 chip via an on-card i2c bus. +Unfortunately, they fail to set the i2c adapter class, so this driver may +fail to find the chip until the nvidia driver is patched. diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg index bee4c30bc1e2..a7952c2bd959 100644 --- a/Documentation/hwmon/f71882fg +++ b/Documentation/hwmon/f71882fg @@ -14,6 +14,10 @@ Supported chips: Prefix: 'f71882fg' Addresses scanned: none, address read from Super I/O config space Datasheet: Available from the Fintek website + * Fintek F71889FG + Prefix: 'f71889fg' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Should become available on the Fintek website soon * Fintek F8000 Prefix: 'f8000' Addresses scanned: none, address read from Super I/O config space @@ -51,6 +55,12 @@ supported. The right one to use depends on external circuitry on the motherboard, so the driver assumes that the BIOS set the method properly. +Note that the lowest numbered temperature zone trip point corresponds to +to the border between the highest and one but highest temperature zones, and +vica versa. So the temperature zone trip points 1-4 (or 1-2) go from high temp +to low temp! This is how things are implemented in the IC, and the driver +mimicks this. + There are 2 modes to specify the speed of the fan, PWM duty cycle (or DC voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM mode where the actual RPM of the fan (as measured) is controlled and the speed diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 659315d98e00..f9ba96c0ac4a 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -86,7 +86,6 @@ The IT8712F and IT8716F additionally feature VID inputs, used to report the Vcore voltage of the processor. The early IT8712F have 5 VID pins, the IT8716F and late IT8712F have 6. They are shared with other functions though, so the functionality may not be available on a given system. -The driver dumbly assume it is there. The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value is stored in the Super-I/O configuration space. Due to technical limitations, diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc new file mode 100644 index 000000000000..044531a86405 --- /dev/null +++ b/Documentation/hwmon/mc13783-adc @@ -0,0 +1,50 @@ +Kernel driver mc13783-adc +========================= + +Supported chips: + * Freescale Atlas MC13783 + Prefix: 'mc13783_adc' + Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1 + +Authors: + Sascha Hauer <s.hauer@pengutronix.de> + Luotao Fu <l.fu@pengutronix.de> + +Description +----------- + +The Freescale MC13783 is a Power Management and Audio Circuit. Among +other things it contains a 10-bit A/D converter. The converter has 16 +channels which can be used in different modes. +The A/D converter has a resolution of 2.25mV. Channels 0-4 have +a dedicated meaning with chip internal scaling applied. Channels 5-7 +can be used as general purpose inputs or alternatively in a dedicated +mode. Channels 12-15 are occupied by the touchscreen if it's active. + +Currently the driver only supports channels 2 and 5-15 with no alternative +modes for channels 5-7. + +See this table for the meaning of the different channels and their chip +internal scaling: + +Channel Signal Input Range Scaling +------------------------------------------------------------------------------- +0 Battery Voltage (BATT) 2.50 - 4.65V -2.40V +1 Battery Current (BATT - BATTISNS) -50 - 50 mV x20 +2 Application Supply (BP) 2.50 - 4.65V -2.40V +3 Charger Voltage (CHRGRAW) 0 - 10V / /5 + 0 - 20V /10 +4 Charger Current (CHRGISNSP-CHRGISNSN) -0.25V - 0.25V x4 +5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.30V No +6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.30V / No / + 1.50 - 3.50V -1.20V +7 General Purpose ADIN7 / UID / Die Temperature 0 - 2.30V / No / + 0 - 2.55V / x0.9 / No +8 General Purpose ADIN8 0 - 2.30V No +9 General Purpose ADIN9 0 - 2.30V No +10 General Purpose ADIN10 0 - 2.30V No +11 General Purpose ADIN11 0 - 2.30V No +12 General Purpose TSX1 / Touchscreen X-plate 1 0 - 2.30V No +13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.30V No +14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.30V No +15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.30V No diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 82def883361b..3de6b0bcb147 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -225,8 +225,6 @@ pwm[1-*]_auto_point[1-*]_temp_hyst to PWM output channels. RW -OR - temp[1-*]_auto_point[1-*]_pwm temp[1-*]_auto_point[1-*]_temp temp[1-*]_auto_point[1-*]_temp_hyst @@ -235,6 +233,15 @@ temp[1-*]_auto_point[1-*]_temp_hyst to temperature channels. RW +There is a third case where trip points are associated to both PWM output +channels and temperature channels: the PWM values are associated to PWM +output channels while the temperature values are associated to temperature +channels. In that case, the result is determined by the mapping between +temperature inputs and PWM outputs. When several temperature inputs are +mapped to a given PWM output, this leads to several candidate PWM values. +The actual result is up to the chip, but in general the highest candidate +value (fastest fan speed) wins. + **************** * Temperatures * diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf index 6ee36dbafd64..44dd2bcc72bd 100644 --- a/Documentation/hwmon/w83627hf +++ b/Documentation/hwmon/w83627hf @@ -32,8 +32,6 @@ Authors: Module Parameters ----------------- -* force_addr: int - Initialize the ISA address of the sensors * force_i2c: int Initialize the I2C address of the sensors * init: int @@ -70,3 +68,30 @@ doesn't help, you may just ignore the bogus VID reading with no harm done. For further information on this driver see the w83781d driver documentation. [1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid + +Forcing the address +------------------- + +The driver used to have a module parameter named force_addr, which could +be used to force the base I/O address of the hardware monitoring block. +This was meant as a workaround for mainboards with a broken BIOS. This +module parameter is gone for technical reasons. If you need this feature, +you can obtain the same result by using the isaset tool (part of +lm-sensors) before loading the driver: + +# Enter the Super I/O config space +isaset -y -f 0x2e 0x87 +isaset -y -f 0x2e 0x87 + +# Select the hwmon logical device +isaset -y 0x2e 0x2f 0x07 0x0b + +# Set the base I/O address (to 0x290 in this example) +isaset -y 0x2e 0x2f 0x60 0x02 +isaset -y 0x2e 0x2f 0x61 0x90 + +# Exit the Super-I/O config space +isaset -y -f 0x2e 0xaa + +The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but +0x4e/0x4f is also possible. diff --git a/MAINTAINERS b/MAINTAINERS index 107a5a5a0174..746b706206da 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -327,6 +327,13 @@ M: Colin Leroy <colin@colino.net> S: Maintained F: drivers/macintosh/therm_adt746x.c +ADT7475 HARDWARE MONITOR DRIVER +M: Jean Delvare <khali@linux-fr.org> +L: lm-sensors@lm-sensors.org +S: Maintained +F: Documentation/hwmon/adt7475 +F: drivers/hwmon/adt7475.c + ADVANSYS SCSI DRIVER M: Matthew Wilcox <matthew@wil.cx> L: linux-scsi@vger.kernel.org @@ -2416,7 +2423,9 @@ HARDWARE MONITORING L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ S: Orphan +F: Documentation/hwmon/ F: drivers/hwmon/ +F: include/linux/hwmon*.h HARDWARE RANDOM NUMBER GENERATOR CORE M: Matt Mackall <mpm@selenic.com> @@ -3312,6 +3321,12 @@ S: Maintained F: Documentation/hwmon/lis3lv02d F: drivers/hwmon/lis3lv02d.* +LM73 HARDWARE MONITOR DRIVER +M: Guillaume Ligneul <guillaume.ligneul@gmail.com> +L: lm-sensors@lm-sensors.org +S: Maintained +F: drivers/hwmon/lm73.c + LM83 HARDWARE MONITOR DRIVER M: Jean Delvare <khali@linux-fr.org> L: lm-sensors@lm-sensors.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 700e93adeb33..9e640c62ebd9 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -191,21 +191,27 @@ config SENSORS_ADT7470 will be called adt7470. config SENSORS_ADT7473 - tristate "Analog Devices ADT7473" + tristate "Analog Devices ADT7473 (DEPRECATED)" depends on I2C && EXPERIMENTAL + select SENSORS_ADT7475 help If you say yes here you get support for the Analog Devices ADT7473 temperature monitoring chips. + This driver is deprecated, you should use the adt7475 driver + instead. + This driver can also be built as a module. If so, the module will be called adt7473. config SENSORS_ADT7475 - tristate "Analog Devices ADT7475" + tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" depends on I2C && EXPERIMENTAL + select HWMON_VID help If you say yes here you get support for the Analog Devices - ADT7475 hardware monitoring chips. + ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring + chips. This driver can also be build as a module. If so, the module will be called adt7475. @@ -305,12 +311,12 @@ config SENSORS_F71805F will be called f71805f. config SENSORS_F71882FG - tristate "Fintek F71858FG, F71862FG, F71882FG and F8000" + tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000" depends on EXPERIMENTAL help If you say yes here you get support for hardware monitoring - features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG - and F8000 Super-I/O chips. + features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG, + F71889FG and F8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called f71882fg. @@ -442,6 +448,15 @@ config SENSORS_LM70 This driver can also be built as a module. If so, the module will be called lm70. +config SENSORS_LM73 + tristate "National Semiconductor LM73" + depends on I2C + help + If you say yes here you get support for National Semiconductor LM73 + sensor chips. + This driver can also be built as a module. If so, the module + will be called lm73. + config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C @@ -841,7 +856,7 @@ config SENSORS_W83781D config SENSORS_W83791D tristate "Winbond W83791D" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for the Winbond W83791D chip. @@ -1008,6 +1023,12 @@ config SENSORS_APPLESMC Say Y here if you have an applicable laptop and want to experience the awesome power of applesmc. +config SENSORS_MC13783_ADC + tristate "Freescale MC13783 ADC" + depends on MFD_MC13783 + help + Support for the A/D converter on MC13783 PMIC. + if ACPI comment "ACPI drivers" diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 9f46cb019cc6..33c2ee105284 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o +obj-$(CONFIG_SENSORS_LM73) += lm73.o obj-$(CONFIG_SENSORS_LM75) += lm75.o obj-$(CONFIG_SENSORS_LM77) += lm77.o obj-$(CONFIG_SENSORS_LM78) += lm78.o @@ -73,6 +74,7 @@ obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o obj-$(CONFIG_SENSORS_MAX1111) += max1111.o obj-$(CONFIG_SENSORS_MAX1619) += max1619.o obj-$(CONFIG_SENSORS_MAX6650) += max6650.o +obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index afc594318125..33acf29531af 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -288,9 +288,8 @@ static int adm1021_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; - int i; - const char *type_name = ""; - int conv_rate, status, config; + const char *type_name; + int conv_rate, status, config, man_id, dev_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("adm1021: detect failed, " @@ -303,62 +302,37 @@ static int adm1021_detect(struct i2c_client *client, int kind, ADM1021_REG_CONV_RATE_R); config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R); - /* Now, we do the remaining detection. */ - if (kind < 0) { - if ((status & 0x03) != 0x00 || (config & 0x3F) != 0x00 - || (conv_rate & 0xF8) != 0x00) { - pr_debug("adm1021: detect failed, " - "chip not detected!\n"); - return -ENODEV; - } + /* Check unused bits */ + if ((status & 0x03) || (config & 0x3F) || (conv_rate & 0xF8)) { + pr_debug("adm1021: detect failed, chip not detected!\n"); + return -ENODEV; } /* Determine the chip type. */ - if (kind <= 0) { - i = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID); - if (i == 0x41) - if ((i2c_smbus_read_byte_data(client, - ADM1021_REG_DEV_ID) & 0xF0) == 0x30) - kind = adm1023; - else - kind = adm1021; - else if (i == 0x49) - kind = thmc10; - else if (i == 0x23) - kind = gl523sm; - else if ((i == 0x4d) && - (i2c_smbus_read_byte_data(client, - ADM1021_REG_DEV_ID) == 0x01)) - kind = max1617a; - else if (i == 0x54) - kind = mc1066; - /* LM84 Mfr ID in a different place, and it has more unused bits */ - else if (conv_rate == 0x00 - && (kind == 0 /* skip extra detection */ - || ((config & 0x7F) == 0x00 - && (status & 0xAB) == 0x00))) - kind = lm84; - else - kind = max1617; - } + man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID); + dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID); - if (kind == max1617) { - type_name = "max1617"; - } else if (kind == max1617a) { + if (man_id == 0x4d && dev_id == 0x01) type_name = "max1617a"; - } else if (kind == adm1021) { - type_name = "adm1021"; - } else if (kind == adm1023) { - type_name = "adm1023"; - } else if (kind == thmc10) { + else if (man_id == 0x41) { + if ((dev_id & 0xF0) == 0x30) + type_name = "adm1023"; + else + type_name = "adm1021"; + } else if (man_id == 0x49) type_name = "thmc10"; - } else if (kind == lm84) { - type_name = "lm84"; - } else if (kind == gl523sm) { + else if (man_id == 0x23) type_name = "gl523sm"; - } else if (kind == mc1066) { + else if (man_id == 0x54) type_name = "mc1066"; - } + /* LM84 Mfr ID in a different place, and it has more unused bits */ + else if (conv_rate == 0x00 + && (config & 0x7F) == 0x00 + && (status & 0xAB) == 0x00) + type_name = "lm84"; + else + type_name = "max1617"; + pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n", type_name, i2c_adapter_id(adapter), client->addr); strlcpy(info->type, type_name, I2C_NAME_SIZE); diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 4db04d603ec9..db6ac2b04f6f 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -2,7 +2,7 @@ * adm1025.c * * Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com> - * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org> * * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6 * voltages (including its own power source) and up to two temperatures @@ -413,67 +413,34 @@ static int adm1025_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; - const char *name = ""; - u8 config; + const char *name; + u8 man_id, chip_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip. A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG); - if (kind < 0) { /* detection */ - if ((config & 0x80) != 0x00 - || (i2c_smbus_read_byte_data(client, - ADM1025_REG_STATUS1) & 0xC0) != 0x00 - || (i2c_smbus_read_byte_data(client, - ADM1025_REG_STATUS2) & 0xBC) != 0x00) { - dev_dbg(&adapter->dev, - "ADM1025 detection failed at 0x%02x.\n", - client->addr); - return -ENODEV; - } + /* Check for unused bits */ + if ((i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG) & 0x80) + || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS1) & 0xC0) + || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS2) & 0xBC)) { + dev_dbg(&adapter->dev, "ADM1025 detection failed at 0x%02x\n", + client->addr); + return -ENODEV; } - if (kind <= 0) { /* identification */ - u8 man_id, chip_id; - - man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID); - chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID); - - if (man_id == 0x41) { /* Analog Devices */ - if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */ - kind = adm1025; - } - } else - if (man_id == 0xA1) { /* Philips */ - if (client->addr != 0x2E - && (chip_id & 0xF0) == 0x20) { /* NE1619 */ - kind = ne1619; - } - } - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%02X, " - "chip_id=0x%02X).\n", man_id, chip_id); - return -ENODEV; - } - } + /* Identification */ + chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID); + if ((chip_id & 0xF0) != 0x20) + return -ENODEV; - if (kind == adm1025) { + man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID); + if (man_id == 0x41) name = "adm1025"; - } else if (kind == ne1619) { + else if (man_id == 0xA1 && client->addr != 0x2E) name = "ne1619"; - } + else + return -ENODEV; + strlcpy(info->type, name, I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index ff7de40b6e35..fb5363985e21 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -1672,35 +1672,26 @@ static int adm1026_detect(struct i2c_client *client, int kind, i2c_adapter_id(client->adapter), client->addr, company, verstep); - /* If auto-detecting, Determine the chip type. */ - if (kind <= 0) { - dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x " - "...\n", i2c_adapter_id(adapter), address); - if (company == ADM1026_COMPANY_ANALOG_DEV - && verstep == ADM1026_VERSTEP_ADM1026) { - kind = adm1026; - } else if (company == ADM1026_COMPANY_ANALOG_DEV - && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { - dev_err(&adapter->dev, "Unrecognized stepping " - "0x%02x. Defaulting to ADM1026.\n", verstep); - kind = adm1026; - } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { - dev_err(&adapter->dev, "Found version/stepping " - "0x%02x. Assuming generic ADM1026.\n", - verstep); - kind = any_chip; - } else { - dev_dbg(&adapter->dev, "Autodetection failed\n"); - /* Not an ADM1026 ... */ - if (kind == 0) { /* User used force=x,y */ - dev_err(&adapter->dev, "Generic ADM1026 not " - "found at %d,0x%02x. Try " - "force_adm1026.\n", - i2c_adapter_id(adapter), address); - } - return -ENODEV; - } + /* Determine the chip type. */ + dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x...\n", + i2c_adapter_id(adapter), address); + if (company == ADM1026_COMPANY_ANALOG_DEV + && verstep == ADM1026_VERSTEP_ADM1026) { + /* Analog Devices ADM1026 */ + } else if (company == ADM1026_COMPANY_ANALOG_DEV + && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { + dev_err(&adapter->dev, "Unrecognized stepping " + "0x%02x. Defaulting to ADM1026.\n", verstep); + } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { + dev_err(&adapter->dev, "Found version/stepping " + "0x%02x. Assuming generic ADM1026.\n", + verstep); + } else { + dev_dbg(&adapter->dev, "Autodetection failed\n"); + /* Not an ADM1026... */ + return -ENODEV; } + strlcpy(info->type, "adm1026", I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index e845b75ccee4..ef91e2a4a567 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -301,59 +301,36 @@ static int adm1029_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + u8 man_id, chip_id, temp_devices_installed, nb_fan_support; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - /* Now we do the detection and identification. A negative kind - * means that the driver was loaded with no force parameter - * (default), so we must both detect and identify the chip - * (actually there is only one possible kind of chip for now, adm1029). - * A zero kind means that the driver was loaded with the force - * parameter, the detection step shall be skipped. A positive kind - * means that the driver was loaded with the force parameter and a - * given kind of chip is requested, so both the detection and the - * identification steps are skipped. */ - - /* Default to an adm1029 if forced */ - if (kind == 0) - kind = adm1029; - /* ADM1029 doesn't have CHIP ID, check just MAN ID * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED, * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values * documented */ - if (kind <= 0) { /* identification */ - u8 man_id, chip_id, temp_devices_installed, nb_fan_support; - - man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID); - chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID); - temp_devices_installed = i2c_smbus_read_byte_data(client, + man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID); + chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID); + temp_devices_installed = i2c_smbus_read_byte_data(client, ADM1029_REG_TEMP_DEVICES_INSTALLED); - nb_fan_support = i2c_smbus_read_byte_data(client, + nb_fan_support = i2c_smbus_read_byte_data(client, ADM1029_REG_NB_FAN_SUPPORT); - /* 0x41 is Analog Devices */ - if (man_id == 0x41 && (temp_devices_installed & 0xf9) == 0x01 - && nb_fan_support == 0x03) { - if ((chip_id & 0xF0) == 0x00) { - kind = adm1029; - } else { - /* There are no "official" CHIP ID, so actually - * we use Major/Minor revision for that */ - printk(KERN_INFO - "adm1029: Unknown major revision %x, " - "please let us know\n", chip_id); - } - } + /* 0x41 is Analog Devices */ + if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01 + || nb_fan_support != 0x03) + return -ENODEV; - if (kind <= 0) { /* identification failed */ - pr_debug("adm1029: Unsupported chip (man_id=0x%02X, " - "chip_id=0x%02X)\n", man_id, chip_id); - return -ENODEV; - } + if ((chip_id & 0xF0) != 0x00) { + /* There are no "official" CHIP ID, so actually + * we use Major/Minor revision for that */ + pr_info("adm1029: Unknown major revision %x, " + "please let us know\n", chip_id); + return -ENODEV; } + strlcpy(info->type, "adm1029", I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 56905955352c..0e722175aae0 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -817,31 +817,19 @@ static int adm1031_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; - const char *name = ""; + const char *name; + int id, co; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - if (kind < 0) { - int id, co; - id = i2c_smbus_read_byte_data(client, 0x3d); - co = i2c_smbus_read_byte_data(client, 0x3e); + id = i2c_smbus_read_byte_data(client, 0x3d); + co = i2c_smbus_read_byte_data(client, 0x3e); - if (!((id == 0x31 || id == 0x30) && co == 0x41)) - return -ENODEV; - kind = (id == 0x30) ? adm1030 : adm1031; - } - - if (kind <= 0) - kind = adm1031; + if (!((id == 0x31 || id == 0x30) && co == 0x41)) + return -ENODEV; + name = (id == 0x30) ? "adm1030" : "adm1031"; - /* Given the detected chip type, set the chip name and the - * auto fan control helper table. */ - if (kind == adm1030) { - name = "adm1030"; - } else if (kind == adm1031) { - name = "adm1031"; - } strlcpy(info->type, name, I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 2444b15f2e9d..20e0481cc206 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -556,51 +556,34 @@ static int adm9240_detect(struct i2c_client *new_client, int kind, if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - if (kind == 0) { - kind = adm9240; - } - - if (kind < 0) { - - /* verify chip: reg address should match i2c address */ - if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR) - != address) { - dev_err(&adapter->dev, "detect fail: address match, " - "0x%02x\n", address); - return -ENODEV; - } - - /* check known chip manufacturer */ - man_id = i2c_smbus_read_byte_data(new_client, - ADM9240_REG_MAN_ID); - if (man_id == 0x23) { - kind = adm9240; - } else if (man_id == 0xda) { - kind = ds1780; - } else if (man_id == 0x01) { - kind = lm81; - } else { - dev_err(&adapter->dev, "detect fail: unknown manuf, " - "0x%02x\n", man_id); - return -ENODEV; - } - - /* successful detect, print chip info */ - die_rev = i2c_smbus_read_byte_data(new_client, - ADM9240_REG_DIE_REV); - dev_info(&adapter->dev, "found %s revision %u\n", - man_id == 0x23 ? "ADM9240" : - man_id == 0xda ? "DS1780" : "LM81", die_rev); + /* verify chip: reg address should match i2c address */ + if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR) + != address) { + dev_err(&adapter->dev, "detect fail: address match, 0x%02x\n", + address); + return -ENODEV; } - /* either forced or detected chip kind */ - if (kind == adm9240) { + /* check known chip manufacturer */ + man_id = i2c_smbus_read_byte_data(new_client, ADM9240_REG_MAN_ID); + if (man_id == 0x23) { name = "adm9240"; - } else if (kind == ds1780) { + } else if (man_id == 0xda) { name = "ds1780"; - } else if (kind == lm81) { + } else if (man_id == 0x01) { name = "lm81"; + } else { + dev_err(&adapter->dev, "detect fail: unknown manuf, 0x%02x\n", + man_id); + return -ENODEV; } + + /* successful detect, print chip info */ + die_rev = i2c_smbus_read_byte_data(new_client, ADM9240_REG_DIE_REV); + dev_info(&adapter->dev, "found %s revision %u\n", + man_id == 0x23 ? "ADM9240" : + man_id == 0xda ? "DS1780" : "LM81", die_rev); + strlcpy(info->type, name, I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index 5c39b4af1b23..451977bca7d6 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -191,6 +191,7 @@ static int ads7828_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + int ch; /* Check we have a valid client */ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) @@ -202,20 +203,17 @@ static int ads7828_detect(struct i2c_client *client, int kind, - Read from the 8 channel addresses - Check the top 4 bits of each result are not set (12 data bits) */ - if (kind < 0) { - int ch; - for (ch = 0; ch < ADS7828_NCH; ch++) { - u16 in_data; - u8 cmd = channel_cmd_byte(ch); - in_data = ads7828_read_value(client, cmd); - if (in_data & 0xF000) { - printk(KERN_DEBUG - "%s : Doesn't look like an ads7828 device\n", - __func__); - return -ENODEV; - } + for (ch = 0; ch < ADS7828_NCH; ch++) { + u16 in_data; + u8 cmd = channel_cmd_byte(ch); + in_data = ads7828_read_value(client, cmd); + if (in_data & 0xF000) { + pr_debug("%s : Doesn't look like an ads7828 device\n", + __func__); + return -ENODEV; } } + strlcpy(info->type, "ads7828", I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c index 1852f27bac51..f9c9562b6a94 100644 --- a/drivers/hwmon/adt7462.c +++ b/drivers/hwmon/adt7462.c @@ -1906,27 +1906,22 @@ static int adt7462_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + int vendor, device, revision; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - if (kind <= 0) { - int vendor, device, revision; - - vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR); - if (vendor != ADT7462_VENDOR) - return -ENODEV; + vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR); + if (vendor != ADT7462_VENDOR) + return -ENODEV; - device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE); - if (device != ADT7462_DEVICE) - return -ENODEV; + device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE); + if (device != ADT7462_DEVICE) + return -ENODEV; - revision = i2c_smbus_read_byte_data(client, - ADT7462_REG_REVISION); - if (revision != ADT7462_REVISION) - return -ENODEV; - } else - dev_dbg(&adapter->dev, "detection forced\n"); + revision = i2c_smbus_read_byte_data(client, ADT7462_REG_REVISION); + if (revision != ADT7462_REVISION) + return -ENODEV; strlcpy(info->type, "adt7462", I2C_NAME_SIZE); diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 633e1a1e9d79..32b1750a6890 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -1229,27 +1229,22 @@ static int adt7470_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + int vendor, device, revision; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - if (kind <= 0) { - int vendor, device, revision; - - vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR); - if (vendor != ADT7470_VENDOR) - return -ENODEV; + vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR); + if (vendor != ADT7470_VENDOR) + return -ENODEV; - device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE); - if (device != ADT7470_DEVICE) - return -ENODEV; + device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE); + if (device != ADT7470_DEVICE) + return -ENODEV; - revision = i2c_smbus_read_byte_data(client, - ADT7470_REG_REVISION); - if (revision != ADT7470_REVISION) - return -ENODEV; - } else - dev_dbg(&adapter->dev, "detection forced\n"); + revision = i2c_smbus_read_byte_data(client, ADT7470_REG_REVISION); + if (revision != ADT7470_REVISION) + return -ENODEV; strlcpy(info->type, "adt7470", I2C_NAME_SIZE); diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index 0a6ce2367b42..aea244db974e 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -174,7 +174,6 @@ static const struct i2c_device_id adt7473_id[] = { { "adt7473", adt7473 }, { } }; -MODULE_DEVICE_TABLE(i2c, adt7473_id); static struct i2c_driver adt7473_driver = { .class = I2C_CLASS_HWMON, @@ -1090,27 +1089,22 @@ static int adt7473_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + int vendor, device, revision; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - if (kind <= 0) { - int vendor, device, revision; - - vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR); - if (vendor != ADT7473_VENDOR) - return -ENODEV; + vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR); + if (vendor != ADT7473_VENDOR) + return -ENODEV; - device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE); - if (device != ADT7473_DEVICE) - return -ENODEV; + device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE); + if (device != ADT7473_DEVICE) + return -ENODEV; - revision = i2c_smbus_read_byte_data(client, - ADT7473_REG_REVISION); - if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) - return -ENODEV; - } else - dev_dbg(&adapter->dev, "detection forced\n"); + revision = i2c_smbus_read_byte_data(client, ADT7473_REG_REVISION); + if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) + return -ENODEV; strlcpy(info->type, "adt7473", I2C_NAME_SIZE); @@ -1171,6 +1165,8 @@ static int adt7473_remove(struct i2c_client *client) static int __init adt7473_init(void) { + pr_notice("The adt7473 driver is deprecated, please use the adt7475 " + "driver instead\n"); return i2c_add_driver(&adt7473_driver); } diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index b5a95193c694..99abfddedbc3 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -3,7 +3,8 @@ * Copyright (C) 2007-2008, Advanced Micro Devices, Inc. * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net> * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com> - + * Copyright (C) 2009 Jean Delvare <khali@linux-fr.org> + * * Derived from the lm83 driver by Jean Delvare * * This program is free software; you can redistribute it and/or modify @@ -17,6 +18,7 @@ #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> +#include <linux/hwmon-vid.h> #include <linux/err.h> /* Indexes for the sysfs hooks */ @@ -39,7 +41,12 @@ /* 7475 Common Registers */ -#define REG_VOLTAGE_BASE 0x21 +#define REG_DEVREV2 0x12 /* ADT7490 only */ + +#define REG_VTT 0x1E /* ADT7490 only */ +#define REG_EXTEND3 0x1F /* ADT7490 only */ + +#define REG_VOLTAGE_BASE 0x20 #define REG_TEMP_BASE 0x25 #define REG_TACH_BASE 0x28 #define REG_PWM_BASE 0x30 @@ -47,12 +54,15 @@ #define REG_DEVID 0x3D #define REG_VENDID 0x3E +#define REG_DEVID2 0x3F #define REG_STATUS1 0x41 #define REG_STATUS2 0x42 -#define REG_VOLTAGE_MIN_BASE 0x46 -#define REG_VOLTAGE_MAX_BASE 0x47 +#define REG_VID 0x43 /* ADT7476 only */ + +#define REG_VOLTAGE_MIN_BASE 0x44 +#define REG_VOLTAGE_MAX_BASE 0x45 #define REG_TEMP_MIN_BASE 0x4E #define REG_TEMP_MAX_BASE 0x4F @@ -73,16 +83,39 @@ #define REG_TEMP_OFFSET_BASE 0x70 +#define REG_CONFIG2 0x73 + #define REG_EXTEND1 0x76 #define REG_EXTEND2 0x77 + +#define REG_CONFIG3 0x78 #define REG_CONFIG5 0x7C +#define REG_CONFIG4 0x7D + +#define REG_STATUS4 0x81 /* ADT7490 only */ + +#define REG_VTT_MIN 0x84 /* ADT7490 only */ +#define REG_VTT_MAX 0x86 /* ADT7490 only */ + +#define VID_VIDSEL 0x80 /* ADT7476 only */ + +#define CONFIG2_ATTN 0x20 + +#define CONFIG3_SMBALERT 0x01 +#define CONFIG3_THERM 0x02 + +#define CONFIG4_PINFUNC 0x03 +#define CONFIG4_MAXDUTY 0x08 +#define CONFIG4_ATTN_IN10 0x30 +#define CONFIG4_ATTN_IN43 0xC0 #define CONFIG5_TWOSCOMP 0x01 #define CONFIG5_TEMPOFFSET 0x02 +#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */ /* ADT7475 Settings */ -#define ADT7475_VOLTAGE_COUNT 2 +#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */ #define ADT7475_TEMP_COUNT 3 #define ADT7475_TACH_COUNT 4 #define ADT7475_PWM_COUNT 3 @@ -113,12 +146,15 @@ #define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx)) #define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx)) -static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END }; +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -I2C_CLIENT_INSMOD_1(adt7475); +I2C_CLIENT_INSMOD_4(adt7473, adt7475, adt7476, adt7490); static const struct i2c_device_id adt7475_id[] = { + { "adt7473", adt7473 }, { "adt7475", adt7475 }, + { "adt7476", adt7476 }, + { "adt7490", adt7490 }, { } }; MODULE_DEVICE_TABLE(i2c, adt7475_id); @@ -131,15 +167,24 @@ struct adt7475_data { unsigned long limits_updated; char valid; + u8 config4; u8 config5; - u16 alarms; - u16 voltage[3][3]; + u8 has_voltage; + u8 bypass_attn; /* Bypass voltage attenuator */ + u8 has_pwm2:1; + u8 has_fan4:1; + u8 has_vid:1; + u32 alarms; + u16 voltage[3][6]; u16 temp[7][3]; u16 tach[2][4]; u8 pwm[4][3]; u8 range[3]; u8 pwmctl[3]; u8 pwmchan[3]; + + u8 vid; + u8 vrm; }; static struct i2c_driver adt7475_driver; @@ -196,26 +241,35 @@ static inline u16 rpm2tach(unsigned long rpm) return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF); } -static inline int reg2vcc(u16 reg) -{ - return (4296 * reg) / 1000; -} +/* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */ +static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = { + { 45, 94 }, /* +2.5V */ + { 175, 525 }, /* Vccp */ + { 68, 71 }, /* Vcc */ + { 93, 47 }, /* +5V */ + { 120, 20 }, /* +12V */ + { 45, 45 }, /* Vtt */ +}; -static inline int reg2vccp(u16 reg) +static inline int reg2volt(int channel, u16 reg, u8 bypass_attn) { - return (2929 * reg) / 1000; -} + const int *r = adt7473_in_scaling[channel]; -static inline u16 vcc2reg(long vcc) -{ - vcc = SENSORS_LIMIT(vcc, 0, 4396); - return (vcc * 1000) / 4296; + if (bypass_attn & (1 << channel)) + return DIV_ROUND_CLOSEST(reg * 2250, 1024); + return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024); } -static inline u16 vccp2reg(long vcc) +static inline u16 volt2reg(int channel, long volt, u8 bypass_attn) { - vcc = SENSORS_LIMIT(vcc, 0, 2998); - return (vcc * 1000) / 2929; + const int *r = adt7473_in_scaling[channel]; + long reg; + + if (bypass_attn & (1 << channel)) + reg = (volt * 1024) / 2250; + else + reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250); + return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2); } static u16 adt7475_read_word(struct i2c_client *client, int reg) @@ -271,12 +325,11 @@ static ssize_t show_voltage(struct device *dev, struct device_attribute *attr, switch (sattr->nr) { case ALARM: return sprintf(buf, "%d\n", - (data->alarms >> (sattr->index + 1)) & 1); + (data->alarms >> sattr->index) & 1); default: val = data->voltage[sattr->nr][sattr->index]; return sprintf(buf, "%d\n", - sattr->index == - 0 ? reg2vccp(val) : reg2vcc(val)); + reg2volt(sattr->index, val, data->bypass_attn)); } } @@ -296,12 +349,19 @@ static ssize_t set_voltage(struct device *dev, struct device_attribute *attr, mutex_lock(&data->lock); data->voltage[sattr->nr][sattr->index] = - sattr->index ? vcc2reg(val) : vccp2reg(val); + volt2reg(sattr->index, val, data->bypass_attn); - if (sattr->nr == MIN) - reg = VOLTAGE_MIN_REG(sattr->index); - else - reg = VOLTAGE_MAX_REG(sattr->index); + if (sattr->index < ADT7475_VOLTAGE_COUNT) { + if (sattr->nr == MIN) + reg = VOLTAGE_MIN_REG(sattr->index); + else + reg = VOLTAGE_MAX_REG(sattr->index); + } else { + if (sattr->nr == MIN) + reg = REG_VTT_MIN; + else + reg = REG_VTT_MAX; + } i2c_smbus_write_byte_data(client, reg, data->voltage[sattr->nr][sattr->index] >> 2); @@ -778,18 +838,103 @@ static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr, return count; } -static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0); -static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage, +static ssize_t show_pwm_at_crit(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY)); +} + +static ssize_t set_pwm_at_crit(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + long val; + + if (strict_strtol(buf, 10, &val)) + return -EINVAL; + if (val != 0 && val != 1) + return -EINVAL; + + mutex_lock(&data->lock); + data->config4 = i2c_smbus_read_byte_data(client, REG_CONFIG4); + if (val) + data->config4 |= CONFIG4_MAXDUTY; + else + data->config4 &= ~CONFIG4_MAXDUTY; + i2c_smbus_write_byte_data(client, REG_CONFIG4, data->config4); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_vrm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct adt7475_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", (int)data->vrm); +} + +static ssize_t set_vrm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct adt7475_data *data = dev_get_drvdata(dev); + long val; + + if (strict_strtol(buf, 10, &val)) + return -EINVAL; + if (val < 0 || val > 255) + return -EINVAL; + data->vrm = val; + + return count; +} + +static ssize_t show_vid(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct adt7475_data *data = adt7475_update_device(dev); + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} + +static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_voltage, NULL, INPUT, 0); +static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_voltage, set_voltage, MAX, 0); -static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage, +static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_voltage, set_voltage, MIN, 0); -static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0); -static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 1); -static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage, +static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0); +static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1); +static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage, set_voltage, MAX, 1); -static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage, +static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage, set_voltage, MIN, 1); -static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1); +static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1); +static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 2); +static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 2); +static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 2); +static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2); +static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_voltage, NULL, INPUT, 3); +static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 3); +static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 3); +static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_voltage, NULL, ALARM, 3); +static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_voltage, NULL, INPUT, 4); +static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 4); +static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 4); +static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_voltage, NULL, ALARM, 8); +static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_voltage, NULL, INPUT, 5); +static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MAX, 5); +static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_voltage, + set_voltage, MIN, 5); +static SENSOR_DEVICE_ATTR_2(in5_alarm, S_IRUGO, show_voltage, NULL, ALARM, 31); static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0); static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0); static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0); @@ -893,6 +1038,13 @@ static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm, MAX, 2); +/* Non-standard name, might need revisiting */ +static DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO, + show_pwm_at_crit, set_pwm_at_crit); + +static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, set_vrm); +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); + static struct attribute *adt7475_attrs[] = { &sensor_dev_attr_in1_input.dev_attr.attr, &sensor_dev_attr_in1_max.dev_attr.attr, @@ -940,60 +1092,156 @@ static struct attribute *adt7475_attrs[] = { &sensor_dev_attr_fan3_input.dev_attr.attr, &sensor_dev_attr_fan3_min.dev_attr.attr, &sensor_dev_attr_fan3_alarm.dev_attr.attr, - &sensor_dev_attr_fan4_input.dev_attr.attr, - &sensor_dev_attr_fan4_min.dev_attr.attr, - &sensor_dev_attr_fan4_alarm.dev_attr.attr, &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, - &sensor_dev_attr_pwm2.dev_attr.attr, - &sensor_dev_attr_pwm2_freq.dev_attr.attr, - &sensor_dev_attr_pwm2_enable.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm3.dev_attr.attr, &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + &dev_attr_pwm_use_point2_pwm_at_crit.attr, NULL, }; -struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs }; +static struct attribute *fan4_attrs[] = { + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *pwm2_attrs[] = { + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + NULL +}; + +static struct attribute *in0_attrs[] = { + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *in3_attrs[] = { + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *in4_attrs[] = { + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *in5_attrs[] = { + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + NULL +}; + +static struct attribute *vid_attrs[] = { + &dev_attr_cpu0_vid.attr, + &dev_attr_vrm.attr, + NULL +}; + +static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs }; +static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs }; +static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs }; +static struct attribute_group in0_attr_group = { .attrs = in0_attrs }; +static struct attribute_group in3_attr_group = { .attrs = in3_attrs }; +static struct attribute_group in4_attr_group = { .attrs = in4_attrs }; +static struct attribute_group in5_attr_group = { .attrs = in5_attrs }; +static struct attribute_group vid_attr_group = { .attrs = vid_attrs }; static int adt7475_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + int vendid, devid, devid2; + const char *name; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - if (kind <= 0) { - if (adt7475_read(REG_VENDID) != 0x41 || - adt7475_read(REG_DEVID) != 0x75) { - dev_err(&adapter->dev, - "Couldn't detect a adt7475 part at 0x%02x\n", - (unsigned int)client->addr); - return -ENODEV; - } + vendid = adt7475_read(REG_VENDID); + devid2 = adt7475_read(REG_DEVID2); + if (vendid != 0x41 || /* Analog Devices */ + (devid2 & 0xf8) != 0x68) + return -ENODEV; + + devid = adt7475_read(REG_DEVID); + if (devid == 0x73) + name = "adt7473"; + else if (devid == 0x75 && client->addr == 0x2e) + name = "adt7475"; + else if (devid == 0x76) + name = "adt7476"; + else if ((devid2 & 0xfc) == 0x6c) + name = "adt7490"; + else { + dev_dbg(&adapter->dev, + "Couldn't detect an ADT7473/75/76/90 part at " + "0x%02x\n", (unsigned int)client->addr); + return -ENODEV; } - strlcpy(info->type, adt7475_id[0].name, I2C_NAME_SIZE); + strlcpy(info->type, name, I2C_NAME_SIZE); return 0; } +static void adt7475_remove_files(struct i2c_client *client, + struct adt7475_data *data) +{ + sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group); + if (data->has_fan4) + sysfs_remove_group(&client->dev.kobj, &fan4_attr_group); + if (data->has_pwm2) + sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group); + if (data->has_voltage & (1 << 0)) + sysfs_remove_group(&client->dev.kobj, &in0_attr_group); + if (data->has_voltage & (1 << 3)) + sysfs_remove_group(&client->dev.kobj, &in3_attr_group); + if (data->has_voltage & (1 << 4)) + sysfs_remove_group(&client->dev.kobj, &in4_attr_group); + if (data->has_voltage & (1 << 5)) + sysfs_remove_group(&client->dev.kobj, &in5_attr_group); + if (data->has_vid) + sysfs_remove_group(&client->dev.kobj, &vid_attr_group); +} + static int adt7475_probe(struct i2c_client *client, const struct i2c_device_id *id) { + static const char *names[] = { + [adt7473] = "ADT7473", + [adt7475] = "ADT7475", + [adt7476] = "ADT7476", + [adt7490] = "ADT7490", + }; + struct adt7475_data *data; - int i, ret = 0; + int i, ret = 0, revision; + u8 config2, config3; data = kzalloc(sizeof(*data), GFP_KERNEL); if (data == NULL) @@ -1002,6 +1250,70 @@ static int adt7475_probe(struct i2c_client *client, mutex_init(&data->lock); i2c_set_clientdata(client, data); + /* Initialize device-specific values */ + switch (id->driver_data) { + case adt7476: + data->has_voltage = 0x0e; /* in1 to in3 */ + revision = adt7475_read(REG_DEVID2) & 0x07; + break; + case adt7490: + data->has_voltage = 0x3e; /* in1 to in5 */ + revision = adt7475_read(REG_DEVID2) & 0x03; + if (revision == 0x03) + revision += adt7475_read(REG_DEVREV2); + break; + default: + data->has_voltage = 0x06; /* in1, in2 */ + revision = adt7475_read(REG_DEVID2) & 0x07; + } + + config3 = adt7475_read(REG_CONFIG3); + /* Pin PWM2 may alternatively be used for ALERT output */ + if (!(config3 & CONFIG3_SMBALERT)) + data->has_pwm2 = 1; + /* Meaning of this bit is inverted for the ADT7473-1 */ + if (id->driver_data == adt7473 && revision >= 1) + data->has_pwm2 = !data->has_pwm2; + + data->config4 = adt7475_read(REG_CONFIG4); + /* Pin TACH4 may alternatively be used for THERM */ + if ((data->config4 & CONFIG4_PINFUNC) == 0x0) + data->has_fan4 = 1; + + /* THERM configuration is more complex on the ADT7476 and ADT7490, + because 2 different pins (TACH4 and +2.5 Vin) can be used for + this function */ + if (id->driver_data == adt7490) { + if ((data->config4 & CONFIG4_PINFUNC) == 0x1 && + !(config3 & CONFIG3_THERM)) + data->has_fan4 = 1; + } + if (id->driver_data == adt7476 || id->driver_data == adt7490) { + if (!(config3 & CONFIG3_THERM) || + (data->config4 & CONFIG4_PINFUNC) == 0x1) + data->has_voltage |= (1 << 0); /* in0 */ + } + + /* On the ADT7476, the +12V input pin may instead be used as VID5, + and VID pins may alternatively be used as GPIO */ + if (id->driver_data == adt7476) { + u8 vid = adt7475_read(REG_VID); + if (!(vid & VID_VIDSEL)) + data->has_voltage |= (1 << 4); /* in4 */ + + data->has_vid = !(adt7475_read(REG_CONFIG5) & CONFIG5_VIDGPIO); + } + + /* Voltage attenuators can be bypassed, globally or individually */ + config2 = adt7475_read(REG_CONFIG2); + if (config2 & CONFIG2_ATTN) { + data->bypass_attn = (0x3 << 3) | 0x3; + } else { + data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) | + ((data->config4 & CONFIG4_ATTN_IN43) >> 3); + } + data->bypass_attn &= data->has_voltage; + /* Call adt7475_read_pwm for all pwm's as this will reprogram any pwm's which are disabled to manual mode with 0% duty cycle */ for (i = 0; i < ADT7475_PWM_COUNT; i++) @@ -1011,16 +1323,70 @@ static int adt7475_probe(struct i2c_client *client, if (ret) goto efree; + /* Features that can be disabled individually */ + if (data->has_fan4) { + ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group); + if (ret) + goto eremove; + } + if (data->has_pwm2) { + ret = sysfs_create_group(&client->dev.kobj, &pwm2_attr_group); + if (ret) + goto eremove; + } + if (data->has_voltage & (1 << 0)) { + ret = sysfs_create_group(&client->dev.kobj, &in0_attr_group); + if (ret) + goto eremove; + } + if (data->has_voltage & (1 << 3)) { + ret = sysfs_create_group(&client->dev.kobj, &in3_attr_group); + if (ret) + goto eremove; + } + if (data->has_voltage & (1 << 4)) { + ret = sysfs_create_group(&client->dev.kobj, &in4_attr_group); + if (ret) + goto eremove; + } + if (data->has_voltage & (1 << 5)) { + ret = sysfs_create_group(&client->dev.kobj, &in5_attr_group); + if (ret) + goto eremove; + } + if (data->has_vid) { + data->vrm = vid_which_vrm(); + ret = sysfs_create_group(&client->dev.kobj, &vid_attr_group); + if (ret) + goto eremove; + } + data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { ret = PTR_ERR(data->hwmon_dev); goto eremove; } + dev_info(&client->dev, "%s device, revision %d\n", + names[id->driver_data], revision); + if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2) + dev_info(&client->dev, "Optional features:%s%s%s%s%s\n", + (data->has_voltage & (1 << 0)) ? " in0" : "", + (data->has_voltage & (1 << 4)) ? " in4" : "", + data->has_fan4 ? " fan4" : "", + data->has_pwm2 ? " pwm2" : "", + data->has_vid ? " vid" : ""); + if (data->bypass_attn) + dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n", + (data->bypass_attn & (1 << 0)) ? " in0" : "", + (data->bypass_attn & (1 << 1)) ? " in1" : "", + (data->bypass_attn & (1 << 3)) ? " in3" : "", + (data->bypass_attn & (1 << 4)) ? " in4" : ""); + return 0; eremove: - sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group); + adt7475_remove_files(client, data); efree: kfree(data); return ret; @@ -1031,7 +1397,7 @@ static int adt7475_remove(struct i2c_client *client) struct adt7475_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group); + adt7475_remove_files(client, data); kfree(data); return 0; @@ -1116,7 +1482,7 @@ static struct adt7475_data *adt7475_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct adt7475_data *data = i2c_get_clientdata(client); - u8 ext; + u16 ext; int i; mutex_lock(&data->lock); @@ -1127,25 +1493,44 @@ static struct adt7475_data *adt7475_update_device(struct device *dev) data->alarms = adt7475_read(REG_STATUS2) << 8; data->alarms |= adt7475_read(REG_STATUS1); - ext = adt7475_read(REG_EXTEND1); - for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) + ext = (adt7475_read(REG_EXTEND2) << 8) | + adt7475_read(REG_EXTEND1); + for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { + if (!(data->has_voltage & (1 << i))) + continue; data->voltage[INPUT][i] = (adt7475_read(VOLTAGE_REG(i)) << 2) | - ((ext >> ((i + 1) * 2)) & 3); + ((ext >> (i * 2)) & 3); + } - ext = adt7475_read(REG_EXTEND2); for (i = 0; i < ADT7475_TEMP_COUNT; i++) data->temp[INPUT][i] = (adt7475_read(TEMP_REG(i)) << 2) | - ((ext >> ((i + 1) * 2)) & 3); + ((ext >> ((i + 5) * 2)) & 3); - for (i = 0; i < ADT7475_TACH_COUNT; i++) + if (data->has_voltage & (1 << 5)) { + data->alarms |= adt7475_read(REG_STATUS4) << 24; + ext = adt7475_read(REG_EXTEND3); + data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 | + ((ext >> 4) & 3); + } + + for (i = 0; i < ADT7475_TACH_COUNT; i++) { + if (i == 3 && !data->has_fan4) + continue; data->tach[INPUT][i] = adt7475_read_word(client, TACH_REG(i)); + } /* Updated by hw when in auto mode */ - for (i = 0; i < ADT7475_PWM_COUNT; i++) + for (i = 0; i < ADT7475_PWM_COUNT; i++) { + if (i == 1 && !data->has_pwm2) + continue; data->pwm[INPUT][i] = adt7475_read(PWM_REG(i)); + } + + if (data->has_vid) + data->vid = adt7475_read(REG_VID) & 0x3f; data->measure_updated = jiffies; } @@ -1153,9 +1538,12 @@ static struct adt7475_data *adt7475_update_device(struct device *dev) /* Limits and settings, should never change update every 60 seconds */ if (time_after(jiffies, data->limits_updated + HZ * 60) || !data->valid) { + data->config4 = adt7475_read(REG_CONFIG4); data->config5 = adt7475_read(REG_CONFIG5); for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { + if (!(data->has_voltage & (1 << i))) + continue; /* Adjust values so they match the input precision */ data->voltage[MIN][i] = adt7475_read(VOLTAGE_MIN_REG(i)) << 2; @@ -1163,6 +1551,11 @@ static struct adt7475_data *adt7475_update_device(struct device *dev) adt7475_read(VOLTAGE_MAX_REG(i)) << 2; } + if (data->has_voltage & (1 << 5)) { + data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2; + data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2; + } + for (i = 0; i < ADT7475_TEMP_COUNT; i++) { /* Adjust values so they match the input precision */ data->temp[MIN][i] = @@ -1178,11 +1571,16 @@ static struct adt7475_data *adt7475_update_device(struct device *dev) } adt7475_read_hystersis(client); - for (i = 0; i < ADT7475_TACH_COUNT; i++) + for (i = 0; i < ADT7475_TACH_COUNT; i++) { + if (i == 3 && !data->has_fan4) + continue; data->tach[MIN][i] = adt7475_read_word(client, TACH_MIN_REG(i)); + } for (i = 0; i < ADT7475_PWM_COUNT; i++) { + if (i == 1 && !data->has_pwm2) + continue; data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i)); data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i)); /* Set the channel and control information */ diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index 8acf82977e7b..480f80ea1fa0 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -701,6 +701,7 @@ static int asb100_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + int val1, val2; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("asb100.o: detect failed, " @@ -708,50 +709,30 @@ static int asb100_detect(struct i2c_client *client, int kind, return -ENODEV; } - /* The chip may be stuck in some other bank than bank 0. This may - make reading other information impossible. Specify a force=... or - force_*=... parameter, and the chip will be reset to the right - bank. */ - if (kind < 0) { - - int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK); - int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN); - - /* If we're in bank 0 */ - if ((!(val1 & 0x07)) && - /* Check for ASB100 ID (low byte) */ - (((!(val1 & 0x80)) && (val2 != 0x94)) || - /* Check for ASB100 ID (high byte ) */ - ((val1 & 0x80) && (val2 != 0x06)))) { - pr_debug("asb100.o: detect failed, " - "bad chip id 0x%02x!\n", val2); - return -ENODEV; - } + val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK); + val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN); - } /* kind < 0 */ + /* If we're in bank 0 */ + if ((!(val1 & 0x07)) && + /* Check for ASB100 ID (low byte) */ + (((!(val1 & 0x80)) && (val2 != 0x94)) || + /* Check for ASB100 ID (high byte ) */ + ((val1 & 0x80) && (val2 != 0x06)))) { + pr_debug("asb100: detect failed, bad chip id 0x%02x!\n", val2); + return -ENODEV; + } - /* We have either had a force parameter, or we have already detected - Winbond. Put it now into bank 0 and Vendor ID High Byte */ + /* Put it now into bank 0 and Vendor ID High Byte */ i2c_smbus_write_byte_data(client, ASB100_REG_BANK, (i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78) | 0x80); /* Determine the chip type. */ - if (kind <= 0) { - int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID); - int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN); - - if ((val1 == 0x31) && (val2 == 0x06)) - kind = asb100; - else { - if (kind == 0) - dev_warn(&adapter->dev, "ignoring " - "'force' parameter for unknown chip " - "at adapter %d, address 0x%02x.\n", - i2c_adapter_id(adapter), client->addr); - return -ENODEV; - } - } + val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID); + val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN); + + if (val1 != 0x31 || val2 != 0x06) + return -ENODEV; strlcpy(info->type, "asb100", I2C_NAME_SIZE); diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 27d62574284f..4377bb0cc526 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -2220,33 +2220,23 @@ static int dme1737_i2c_detect(struct i2c_client *client, int kind, return -ENODEV; } - /* A negative kind means that the driver was loaded with no force - * parameter (default), so we must identify the chip. */ - if (kind < 0) { - company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY); - verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP); - - if (company == DME1737_COMPANY_SMSC && - (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) { - kind = dme1737; - } else if (company == DME1737_COMPANY_SMSC && - verstep == SCH5027_VERSTEP) { - kind = sch5027; - } else { - return -ENODEV; - } - } + company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY); + verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP); - if (kind == sch5027) { + if (company == DME1737_COMPANY_SMSC && + verstep == SCH5027_VERSTEP) { name = "sch5027"; - } else { - kind = dme1737; + + } else if (company == DME1737_COMPANY_SMSC && + (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) { name = "dme1737"; + } else { + return -ENODEV; } dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n", - kind == sch5027 ? "SCH5027" : "DME1737", client->addr, - verstep); + verstep == SCH5027_VERSTEP ? "SCH5027" : "DME1737", + client->addr, verstep); strlcpy(info->type, name, I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 53f88f511816..2a4c6a05b14f 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -237,20 +237,16 @@ static int ds1621_detect(struct i2c_client *client, int kind, return -ENODEV; /* Now, we do the remaining detection. It is lousy. */ - if (kind < 0) { - /* The NVB bit should be low if no EEPROM write has been - requested during the latest 10ms, which is highly - improbable in our case. */ - conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); - if (conf < 0 || conf & DS1621_REG_CONFIG_NVB) + /* The NVB bit should be low if no EEPROM write has been requested + during the latest 10ms, which is highly improbable in our case. */ + conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF); + if (conf < 0 || conf & DS1621_REG_CONFIG_NVB) + return -ENODEV; + /* The 7 lowest bits of a temperature should always be 0. */ + for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) { + temp = i2c_smbus_read_word_data(client, DS1621_REG_TEMP[i]); + if (temp < 0 || (temp & 0x7f00)) return -ENODEV; - /* The 7 lowest bits of a temperature should always be 0. */ - for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) { - temp = i2c_smbus_read_word_data(client, - DS1621_REG_TEMP[i]); - if (temp < 0 || (temp & 0x7f00)) - return -ENODEV; - } } strlcpy(info->type, "ds1621", I2C_NAME_SIZE); diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 4146105f1a57..a95fa4256caa 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -48,6 +48,7 @@ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ +#define SIO_F71889_ID 0x0723 /* Chipset ID */ #define SIO_F8000_ID 0x0581 /* Chipset ID */ #define REGION_LENGTH 8 @@ -95,12 +96,13 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -enum chips { f71858fg, f71862fg, f71882fg, f8000 }; +enum chips { f71858fg, f71862fg, f71882fg, f71889fg, f8000 }; static const char *f71882fg_names[] = { "f71858fg", "f71862fg", "f71882fg", + "f71889fg", "f8000", }; @@ -155,7 +157,7 @@ struct f71882fg_data { u8 pwm_auto_point_hyst[2]; u8 pwm_auto_point_mapping[4]; u8 pwm_auto_point_pwm[4][5]; - u8 pwm_auto_point_temp[4][4]; + s8 pwm_auto_point_temp[4][4]; }; /* Sysfs in */ @@ -258,7 +260,9 @@ static struct platform_driver f71882fg_driver = { static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); -/* Temp and in attr for the f71858fg */ +/* Temp and in attr for the f71858fg, the f71858fg is special as it + has its temperature indexes start at 0 (the others start at 1) and + it only has 3 voltage inputs */ static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = { SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1), @@ -302,8 +306,8 @@ static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = { SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2), }; -/* Temp and in attr common to both the f71862fg and f71882fg */ -static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = { +/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */ +static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = { SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1), SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2), @@ -371,8 +375,8 @@ static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = { SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3), }; -/* Temp and in attr found only on the f71882fg */ -static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = { +/* For models with in1 alarm capability */ +static struct sensor_device_attribute_2 fxxxx_in1_alarm_attr[] = { SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max, 0, 1), SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep, @@ -383,6 +387,7 @@ static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = { /* Temp and in attr for the f8000 Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max) is used as hysteresis value to clear alarms + Also like the f71858fg its temperature indexes start at 0 */ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = { SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0), @@ -413,61 +418,70 @@ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = { }; /* Fan / PWM attr common to all models */ -static struct sensor_device_attribute_2 fxxxx_fan_attr[] = { +static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { { SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0), SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR, show_fan_full_speed, store_fan_full_speed, 0, 0), SENSOR_ATTR_2(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 0), - SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1), - SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR, - show_fan_full_speed, - store_fan_full_speed, 0, 1), - SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1), - SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2), - SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR, - show_fan_full_speed, - store_fan_full_speed, 0, 2), - SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2), - SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0), SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, store_pwm_enable, 0, 0), SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR, show_pwm_interpolate, store_pwm_interpolate, 0, 0), - SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, - show_pwm_auto_point_channel, - store_pwm_auto_point_channel, 0, 0), - +}, { + SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1), + SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 1), + SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1), SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1), SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, store_pwm_enable, 0, 1), SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR, show_pwm_interpolate, store_pwm_interpolate, 0, 1), - SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, - show_pwm_auto_point_channel, - store_pwm_auto_point_channel, 0, 1), - +}, { + SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2), + SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 2), + SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2), SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2), SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, store_pwm_enable, 0, 2), SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR, show_pwm_interpolate, store_pwm_interpolate, 0, 2), - SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, - show_pwm_auto_point_channel, - store_pwm_auto_point_channel, 0, 2), -}; +}, { + SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3), + SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR, + show_fan_full_speed, + store_fan_full_speed, 0, 3), + SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3), + SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3), + SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0, 3), + SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR, + show_pwm_interpolate, store_pwm_interpolate, 0, 3), +} }; -/* Fan / PWM attr for the f71862fg, less pwms and less zones per pwm than the - f71882fg */ -static struct sensor_device_attribute_2 f71862fg_fan_attr[] = { +/* Attr for models which can beep on Fan alarm */ +static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = { SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep, store_fan_beep, 0, 0), SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep, store_fan_beep, 0, 1), SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep, store_fan_beep, 0, 2), + SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep, + store_fan_beep, 0, 3), +}; +/* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the + f71858fg / f71882fg / f71889fg */ +static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = { + SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 0), SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR, show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, 1, 0), @@ -487,6 +501,9 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = { SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO, show_pwm_auto_point_temp_hyst, NULL, 3, 0), + SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 1), SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR, show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, 1, 1), @@ -506,6 +523,9 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = { SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO, show_pwm_auto_point_temp_hyst, NULL, 3, 1), + SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 2), SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR, show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, 1, 2), @@ -526,8 +546,11 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = { show_pwm_auto_point_temp_hyst, NULL, 3, 2), }; -/* Fan / PWM attr common to both the f71882fg and f71858fg */ -static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = { +/* PWM attr common to the f71858fg, f71882fg and f71889fg */ +static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[4][14] = { { + SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 0), SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR, show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, 0, 0), @@ -565,7 +588,10 @@ static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = { show_pwm_auto_point_temp_hyst, NULL, 2, 0), SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO, show_pwm_auto_point_temp_hyst, NULL, 3, 0), - +}, { + SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 1), SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR, show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, 0, 1), @@ -603,7 +629,10 @@ static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = { show_pwm_auto_point_temp_hyst, NULL, 2, 1), SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO, show_pwm_auto_point_temp_hyst, NULL, 3, 1), - +}, { + SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 2), SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR, show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, 0, 2), @@ -641,30 +670,7 @@ static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = { show_pwm_auto_point_temp_hyst, NULL, 2, 2), SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO, show_pwm_auto_point_temp_hyst, NULL, 3, 2), -}; - -/* Fan / PWM attr found on the f71882fg but not on the f71858fg */ -static struct sensor_device_attribute_2 f71882fg_fan_attr[] = { - SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 0, 0), - SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 0, 1), - SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 0, 2), - - SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3), - SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR, - show_fan_full_speed, - store_fan_full_speed, 0, 3), - SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep, - store_fan_beep, 0, 3), - SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3), - - SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3), - SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable, - store_pwm_enable, 0, 3), - SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR, - show_pwm_interpolate, store_pwm_interpolate, 0, 3), +}, { SENSOR_ATTR_2(pwm4_auto_channels_temp, S_IRUGO|S_IWUSR, show_pwm_auto_point_channel, store_pwm_auto_point_channel, 0, 3), @@ -705,14 +711,20 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = { show_pwm_auto_point_temp_hyst, NULL, 2, 3), SENSOR_ATTR_2(pwm4_auto_point4_temp_hyst, S_IRUGO, show_pwm_auto_point_temp_hyst, NULL, 3, 3), -}; +} }; -/* Fan / PWM attr for the f8000, zones mapped to temp instead of to pwm! - Also the register block at offset A0 maps to TEMP1 (so our temp2, as the - F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */ +/* Fan attr specific to the f8000 (4th fan input can only measure speed) */ static struct sensor_device_attribute_2 f8000_fan_attr[] = { SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3), +}; +/* PWM attr for the f8000, zones mapped to temp instead of to pwm! + Also the register block at offset A0 maps to TEMP1 (so our temp2, as the + F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */ +static struct sensor_device_attribute_2 f8000_auto_pwm_attr[] = { + SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 0), SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR, show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, 0, 2), @@ -751,6 +763,9 @@ static struct sensor_device_attribute_2 f8000_fan_attr[] = { SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO, show_pwm_auto_point_temp_hyst, NULL, 3, 2), + SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 1), SENSOR_ATTR_2(temp2_auto_point1_pwm, S_IRUGO|S_IWUSR, show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, 0, 0), @@ -789,6 +804,9 @@ static struct sensor_device_attribute_2 f8000_fan_attr[] = { SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO, show_pwm_auto_point_temp_hyst, NULL, 3, 0), + SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR, + show_pwm_auto_point_channel, + store_pwm_auto_point_channel, 0, 2), SENSOR_ATTR_2(temp3_auto_point1_pwm, S_IRUGO|S_IWUSR, show_pwm_auto_point_pwm, store_pwm_auto_point_pwm, 0, 1), @@ -929,7 +947,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) /* Update once every 60 seconds */ if ( time_after(jiffies, data->last_limits + 60 * HZ ) || !data->valid) { - if (data->type == f71882fg) { + if (data->type == f71882fg || data->type == f71889fg) { data->in1_max = f71882fg_read8(data, F71882FG_REG_IN1_HIGH); data->in_beep = @@ -951,7 +969,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) F71882FG_REG_TEMP_HYST(1)); } - if (data->type == f71862fg || data->type == f71882fg) { + if (data->type == f71862fg || data->type == f71882fg || + data->type == f71889fg) { data->fan_beep = f71882fg_read8(data, F71882FG_REG_FAN_BEEP); data->temp_beep = f71882fg_read8(data, @@ -961,15 +980,33 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) data->temp_type[2] = (reg & 0x04) ? 2 : 4; data->temp_type[3] = (reg & 0x08) ? 2 : 4; } - reg2 = f71882fg_read8(data, F71882FG_REG_PECI); - if ((reg2 & 0x03) == 0x01) - data->temp_type[1] = 6 /* PECI */; - else if ((reg2 & 0x03) == 0x02) - data->temp_type[1] = 5 /* AMDSI */; - else if (data->type == f71862fg || data->type == f71882fg) - data->temp_type[1] = (reg & 0x02) ? 2 : 4; - else - data->temp_type[1] = 2; /* Only supports BJT */ + /* Determine temp index 1 sensor type */ + if (data->type == f71889fg) { + reg2 = f71882fg_read8(data, F71882FG_REG_START); + switch ((reg2 & 0x60) >> 5) { + case 0x00: /* BJT / Thermistor */ + data->temp_type[1] = (reg & 0x02) ? 2 : 4; + break; + case 0x01: /* AMDSI */ + data->temp_type[1] = 5; + break; + case 0x02: /* PECI */ + case 0x03: /* Ibex Peak ?? Report as PECI for now */ + data->temp_type[1] = 6; + break; + } + } else { + reg2 = f71882fg_read8(data, F71882FG_REG_PECI); + if ((reg2 & 0x03) == 0x01) + data->temp_type[1] = 6; /* PECI */ + else if ((reg2 & 0x03) == 0x02) + data->temp_type[1] = 5; /* AMDSI */ + else if (data->type == f71862fg || + data->type == f71882fg) + data->temp_type[1] = (reg & 0x02) ? 2 : 4; + else /* f71858fg and f8000 only support BJT */ + data->temp_type[1] = 2; + } data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); @@ -1046,7 +1083,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) if (data->type == f8000) data->fan[3] = f71882fg_read16(data, F71882FG_REG_FAN(3)); - if (data->type == f71882fg) + if (data->type == f71882fg || data->type == f71889fg) data->in_status = f71882fg_read8(data, F71882FG_REG_IN_STATUS); for (nr = 0; nr < nr_ins; nr++) @@ -1764,7 +1801,11 @@ static ssize_t store_pwm_auto_point_temp(struct device *dev, int pwm = to_sensor_dev_attr_2(devattr)->index; int point = to_sensor_dev_attr_2(devattr)->nr; long val = simple_strtol(buf, NULL, 10) / 1000; - val = SENSORS_LIMIT(val, 0, 255); + + if (data->type == f71889fg) + val = SENSORS_LIMIT(val, -128, 127); + else + val = SENSORS_LIMIT(val, 0, 127); mutex_lock(&data->update_lock); f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val); @@ -1794,6 +1835,15 @@ static int __devinit f71882fg_create_sysfs_files(struct platform_device *pdev, return 0; } +static void f71882fg_remove_sysfs_files(struct platform_device *pdev, + struct sensor_device_attribute_2 *attr, int count) +{ + int i; + + for (i = 0; i < count; i++) + device_remove_file(&pdev->dev, &attr[i].dev_attr); +} + static int __devinit f71882fg_probe(struct platform_device *pdev) { struct f71882fg_data *data; @@ -1846,16 +1896,17 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) ARRAY_SIZE(f71858fg_in_temp_attr)); break; case f71882fg: + case f71889fg: err = f71882fg_create_sysfs_files(pdev, - f71882fg_in_temp_attr, - ARRAY_SIZE(f71882fg_in_temp_attr)); + fxxxx_in1_alarm_attr, + ARRAY_SIZE(fxxxx_in1_alarm_attr)); if (err) goto exit_unregister_sysfs; /* fall through! */ case f71862fg: err = f71882fg_create_sysfs_files(pdev, - f718x2fg_in_temp_attr, - ARRAY_SIZE(f718x2fg_in_temp_attr)); + fxxxx_in_temp_attr, + ARRAY_SIZE(fxxxx_in_temp_attr)); break; case f8000: err = f71882fg_create_sysfs_files(pdev, @@ -1883,6 +1934,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) err = (data->pwm_enable & 0x15) != 0x15; break; case f71882fg: + case f71889fg: err = 0; break; case f8000: @@ -1897,34 +1949,55 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) goto exit_unregister_sysfs; } - err = f71882fg_create_sysfs_files(pdev, fxxxx_fan_attr, - ARRAY_SIZE(fxxxx_fan_attr)); + err = f71882fg_create_sysfs_files(pdev, &fxxxx_fan_attr[0][0], + ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans); if (err) goto exit_unregister_sysfs; - switch (data->type) { - case f71862fg: - err = f71882fg_create_sysfs_files(pdev, - f71862fg_fan_attr, - ARRAY_SIZE(f71862fg_fan_attr)); - break; - case f71882fg: + if (data->type == f71862fg || data->type == f71882fg || + data->type == f71889fg) { err = f71882fg_create_sysfs_files(pdev, - f71882fg_fan_attr, - ARRAY_SIZE(f71882fg_fan_attr)); + fxxxx_fan_beep_attr, nr_fans); if (err) goto exit_unregister_sysfs; - /* fall through! */ - case f71858fg: + } + + switch (data->type) { + case f71862fg: err = f71882fg_create_sysfs_files(pdev, - f71882fg_f71858fg_fan_attr, - ARRAY_SIZE(f71882fg_f71858fg_fan_attr)); + f71862fg_auto_pwm_attr, + ARRAY_SIZE(f71862fg_auto_pwm_attr)); break; case f8000: err = f71882fg_create_sysfs_files(pdev, f8000_fan_attr, ARRAY_SIZE(f8000_fan_attr)); + if (err) + goto exit_unregister_sysfs; + err = f71882fg_create_sysfs_files(pdev, + f8000_auto_pwm_attr, + ARRAY_SIZE(f8000_auto_pwm_attr)); break; + case f71889fg: + for (i = 0; i < nr_fans; i++) { + data->pwm_auto_point_mapping[i] = + f71882fg_read8(data, + F71882FG_REG_POINT_MAPPING(i)); + if (data->pwm_auto_point_mapping[i] & 0x80) + break; + } + if (i != nr_fans) { + dev_warn(&pdev->dev, + "Auto pwm controlled by raw digital " + "data, disabling pwm auto_point " + "sysfs attributes\n"); + break; + } + /* fall through */ + default: /* f71858fg / f71882fg */ + err = f71882fg_create_sysfs_files(pdev, + &fxxxx_auto_pwm_attr[0][0], + ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans); } if (err) goto exit_unregister_sysfs; @@ -1954,33 +2027,76 @@ exit_free: static int f71882fg_remove(struct platform_device *pdev) { - int i; struct f71882fg_data *data = platform_get_drvdata(pdev); + int nr_fans = (data->type == f71882fg) ? 4 : 3; + u8 start_reg = f71882fg_read8(data, F71882FG_REG_START); platform_set_drvdata(pdev, NULL); if (data->hwmon_dev) hwmon_device_unregister(data->hwmon_dev); - /* Note we are not looping over all attr arrays we have as the ones - below are supersets of the ones skipped. */ device_remove_file(&pdev->dev, &dev_attr_name); - for (i = 0; i < ARRAY_SIZE(f718x2fg_in_temp_attr); i++) - device_remove_file(&pdev->dev, - &f718x2fg_in_temp_attr[i].dev_attr); - - for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++) - device_remove_file(&pdev->dev, - &f71882fg_in_temp_attr[i].dev_attr); + if (start_reg & 0x01) { + switch (data->type) { + case f71858fg: + if (data->temp_config & 0x10) + f71882fg_remove_sysfs_files(pdev, + f8000_in_temp_attr, + ARRAY_SIZE(f8000_in_temp_attr)); + else + f71882fg_remove_sysfs_files(pdev, + f71858fg_in_temp_attr, + ARRAY_SIZE(f71858fg_in_temp_attr)); + break; + case f71882fg: + case f71889fg: + f71882fg_remove_sysfs_files(pdev, + fxxxx_in1_alarm_attr, + ARRAY_SIZE(fxxxx_in1_alarm_attr)); + /* fall through! */ + case f71862fg: + f71882fg_remove_sysfs_files(pdev, + fxxxx_in_temp_attr, + ARRAY_SIZE(fxxxx_in_temp_attr)); + break; + case f8000: + f71882fg_remove_sysfs_files(pdev, + f8000_in_temp_attr, + ARRAY_SIZE(f8000_in_temp_attr)); + break; + } + } - for (i = 0; i < ARRAY_SIZE(fxxxx_fan_attr); i++) - device_remove_file(&pdev->dev, &fxxxx_fan_attr[i].dev_attr); + if (start_reg & 0x02) { + f71882fg_remove_sysfs_files(pdev, &fxxxx_fan_attr[0][0], + ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans); - for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++) - device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr); + if (data->type == f71862fg || data->type == f71882fg || + data->type == f71889fg) + f71882fg_remove_sysfs_files(pdev, + fxxxx_fan_beep_attr, nr_fans); - for (i = 0; i < ARRAY_SIZE(f8000_fan_attr); i++) - device_remove_file(&pdev->dev, &f8000_fan_attr[i].dev_attr); + switch (data->type) { + case f71862fg: + f71882fg_remove_sysfs_files(pdev, + f71862fg_auto_pwm_attr, + ARRAY_SIZE(f71862fg_auto_pwm_attr)); + break; + case f8000: + f71882fg_remove_sysfs_files(pdev, + f8000_fan_attr, + ARRAY_SIZE(f8000_fan_attr)); + f71882fg_remove_sysfs_files(pdev, + f8000_auto_pwm_attr, + ARRAY_SIZE(f8000_auto_pwm_attr)); + break; + default: /* f71858fg / f71882fg / f71889fg */ + f71882fg_remove_sysfs_files(pdev, + &fxxxx_auto_pwm_attr[0][0], + ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans); + } + } kfree(data); @@ -2012,11 +2128,15 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, case SIO_F71882_ID: sio_data->type = f71882fg; break; + case SIO_F71889_ID: + sio_data->type = f71889fg; + break; case SIO_F8000_ID: sio_data->type = f8000; break; default: - printk(KERN_INFO DRVNAME ": Unsupported Fintek device\n"); + printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n", + (unsigned int)devid); goto exit; } diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index e2107e533ede..40dfbcd3f3f2 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -681,30 +681,20 @@ static int f75375_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; - u8 version = 0; - const char *name = ""; - - if (kind < 0) { - u16 vendid = f75375_read16(client, F75375_REG_VENDOR); - u16 chipid = f75375_read16(client, F75375_CHIP_ID); - version = f75375_read8(client, F75375_REG_VERSION); - if (chipid == 0x0306 && vendid == 0x1934) { - kind = f75375; - } else if (chipid == 0x0204 && vendid == 0x1934) { - kind = f75373; - } else { - dev_err(&adapter->dev, - "failed,%02X,%02X,%02X\n", - chipid, version, vendid); - return -ENODEV; - } - } + u16 vendid, chipid; + u8 version; + const char *name; - if (kind == f75375) { + vendid = f75375_read16(client, F75375_REG_VENDOR); + chipid = f75375_read16(client, F75375_CHIP_ID); + if (chipid == 0x0306 && vendid == 0x1934) name = "f75375"; - } else if (kind == f75373) { + else if (chipid == 0x0204 && vendid == 0x1934) name = "f75373"; - } + else + return -ENODEV; + + version = f75375_read8(client, F75375_REG_VERSION); dev_info(&adapter->dev, "found %s version: %02X\n", name, version); strlcpy(info->type, name, I2C_NAME_SIZE); diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index da1b1f9488af..281829cd1533 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -1000,43 +1000,38 @@ static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy) } } -static int fschmd_detect(struct i2c_client *client, int kind, +static int fschmd_detect(struct i2c_client *client, int _kind, struct i2c_board_info *info) { + enum chips kind; struct i2c_adapter *adapter = client->adapter; + char id[4]; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; /* Detect & Identify the chip */ - if (kind <= 0) { - char id[4]; - - id[0] = i2c_smbus_read_byte_data(client, - FSCHMD_REG_IDENT_0); - id[1] = i2c_smbus_read_byte_data(client, - FSCHMD_REG_IDENT_1); - id[2] = i2c_smbus_read_byte_data(client, - FSCHMD_REG_IDENT_2); - id[3] = '\0'; - - if (!strcmp(id, "PEG")) - kind = fscpos; - else if (!strcmp(id, "HER")) - kind = fscher; - else if (!strcmp(id, "SCY")) - kind = fscscy; - else if (!strcmp(id, "HRC")) - kind = fschrc; - else if (!strcmp(id, "HMD")) - kind = fschmd; - else if (!strcmp(id, "HDS")) - kind = fschds; - else if (!strcmp(id, "SYL")) - kind = fscsyl; - else - return -ENODEV; - } + id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0); + id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1); + id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2); + id[3] = '\0'; + + if (!strcmp(id, "PEG")) + kind = fscpos; + else if (!strcmp(id, "HER")) + kind = fscher; + else if (!strcmp(id, "SCY")) + kind = fscscy; + else if (!strcmp(id, "HRC")) + kind = fschrc; + else if (!strcmp(id, "HMD")) + kind = fschmd; + else if (!strcmp(id, "HDS")) + kind = fschds; + else if (!strcmp(id, "SYL")) + kind = fscsyl; + else + return -ENODEV; strlcpy(info->type, fschmd_id[kind - 1].name, I2C_NAME_SIZE); diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 7820df45d77a..1d69458aa0b6 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -488,36 +488,21 @@ static int gl518_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; - int i; + int rev; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) return -ENODEV; /* Now, we do the remaining detection. */ - - if (kind < 0) { - if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80) - || (gl518_read_value(client, GL518_REG_CONF) & 0x80)) - return -ENODEV; - } + if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80) + || (gl518_read_value(client, GL518_REG_CONF) & 0x80)) + return -ENODEV; /* Determine the chip type. */ - if (kind <= 0) { - i = gl518_read_value(client, GL518_REG_REVISION); - if (i == 0x00) { - kind = gl518sm_r00; - } else if (i == 0x80) { - kind = gl518sm_r80; - } else { - if (kind <= 0) - dev_info(&adapter->dev, - "Ignoring 'force' parameter for unknown " - "chip at adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), client->addr); - return -ENODEV; - } - } + rev = gl518_read_value(client, GL518_REG_REVISION); + if (rev != 0x00 && rev != 0x80) + return -ENODEV; strlcpy(info->type, "gl518sm", I2C_NAME_SIZE); diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index 19616f2242b0..92b5720ceaff 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -691,13 +691,11 @@ static int gl520_detect(struct i2c_client *client, int kind, return -ENODEV; /* Determine the chip type. */ - if (kind < 0) { - if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) || - ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) || - ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) { - dev_dbg(&client->dev, "Unknown chip type, skipping\n"); - return -ENODEV; - } + if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) || + ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) || + ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) { + dev_dbg(&client->dev, "Unknown chip type, skipping\n"); + return -ENODEV; } strlcpy(info->type, "gl520sm", I2C_NAME_SIZE); diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index a3749cb0f181..0ffe84d190bb 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -124,6 +124,8 @@ superio_exit(void) #define IT87_BASE_REG 0x60 /* Logical device 7 registers (IT8712F and later) */ +#define IT87_SIO_GPIO3_REG 0x27 +#define IT87_SIO_GPIO5_REG 0x29 #define IT87_SIO_PINX2_REG 0x2c /* Pin selection */ #define IT87_SIO_VID_REG 0xfc /* VID value */ @@ -244,7 +246,9 @@ struct it87_sio_data { /* Values read from Super-I/O config space */ u8 revision; u8 vid_value; - /* Values set based on DMI strings */ + /* Features skipped based on config or DMI */ + u8 skip_vid; + u8 skip_fan; u8 skip_pwm; }; @@ -1028,11 +1032,35 @@ static int __init it87_find(unsigned short *address, chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ - if (sio_data->type != it87) { + if (sio_data->type == it87) { + /* The IT8705F doesn't have VID pins at all */ + sio_data->skip_vid = 1; + } else { int reg; superio_select(GPIO); - if (sio_data->type == it8718 || sio_data->type == it8720) + /* We need at least 4 VID pins */ + reg = superio_inb(IT87_SIO_GPIO3_REG); + if (reg & 0x0f) { + pr_info("it87: VID is disabled (pins used for GPIO)\n"); + sio_data->skip_vid = 1; + } + + /* Check if fan3 is there or not */ + if (reg & (1 << 6)) + sio_data->skip_pwm |= (1 << 2); + if (reg & (1 << 7)) + sio_data->skip_fan |= (1 << 2); + + /* Check if fan2 is there or not */ + reg = superio_inb(IT87_SIO_GPIO5_REG); + if (reg & (1 << 1)) + sio_data->skip_pwm |= (1 << 1); + if (reg & (1 << 2)) + sio_data->skip_fan |= (1 << 1); + + if ((sio_data->type == it8718 || sio_data->type == it8720) + && !(sio_data->skip_vid)) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); @@ -1236,8 +1264,7 @@ static int __devinit it87_probe(struct platform_device *pdev) } } - if (data->type == it8712 || data->type == it8716 - || data->type == it8718 || data->type == it8720) { + if (!sio_data->skip_vid) { data->vrm = vid_which_vrm(); /* VID reading from Super-I/O config space if available */ data->vid = sio_data->vid_value; @@ -1355,8 +1382,10 @@ static int __devinit it87_check_pwm(struct device *dev) /* Called when we have found a new IT87. */ static void __devinit it87_init_device(struct platform_device *pdev) { + struct it87_sio_data *sio_data = pdev->dev.platform_data; struct it87_data *data = platform_get_drvdata(pdev); int tmp, i; + u8 mask; /* initialize to sane defaults: * - if the chip is in manual pwm mode, this will be overwritten with @@ -1402,10 +1431,11 @@ static void __devinit it87_init_device(struct platform_device *pdev) } /* Check if tachometers are reset manually or by some reason */ + mask = 0x70 & ~(sio_data->skip_fan << 4); data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL); - if ((data->fan_main_ctrl & 0x70) == 0) { + if ((data->fan_main_ctrl & mask) == 0) { /* Enable all fan tachometers */ - data->fan_main_ctrl |= 0x70; + data->fan_main_ctrl |= mask; it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); } data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; @@ -1428,6 +1458,9 @@ static void __devinit it87_init_device(struct platform_device *pdev) } } + /* Fan input pins may be used for alternative functions */ + data->has_fan &= ~sio_data->skip_fan; + /* Set current fan mode registers and the default settings for the * other mode registers */ for (i = 0; i < 3; i++) { diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 3195a265f0e9..5da66ab04f74 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -427,40 +427,34 @@ static int lm63_detect(struct i2c_client *new_client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = new_client->adapter; + u8 man_id, chip_id, reg_config1, reg_config2; + u8 reg_alert_status, reg_alert_mask; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - if (kind < 0) { /* must identify */ - u8 man_id, chip_id, reg_config1, reg_config2; - u8 reg_alert_status, reg_alert_mask; - - man_id = i2c_smbus_read_byte_data(new_client, - LM63_REG_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - LM63_REG_CHIP_ID); - reg_config1 = i2c_smbus_read_byte_data(new_client, - LM63_REG_CONFIG1); - reg_config2 = i2c_smbus_read_byte_data(new_client, - LM63_REG_CONFIG2); - reg_alert_status = i2c_smbus_read_byte_data(new_client, - LM63_REG_ALERT_STATUS); - reg_alert_mask = i2c_smbus_read_byte_data(new_client, - LM63_REG_ALERT_MASK); - - if (man_id == 0x01 /* National Semiconductor */ - && chip_id == 0x41 /* LM63 */ - && (reg_config1 & 0x18) == 0x00 - && (reg_config2 & 0xF8) == 0x00 - && (reg_alert_status & 0x20) == 0x00 - && (reg_alert_mask & 0xA4) == 0xA4) { - kind = lm63; - } else { /* failed */ - dev_dbg(&adapter->dev, "Unsupported chip " - "(man_id=0x%02X, chip_id=0x%02X).\n", - man_id, chip_id); - return -ENODEV; - } + man_id = i2c_smbus_read_byte_data(new_client, LM63_REG_MAN_ID); + chip_id = i2c_smbus_read_byte_data(new_client, LM63_REG_CHIP_ID); + + reg_config1 = i2c_smbus_read_byte_data(new_client, + LM63_REG_CONFIG1); + reg_config2 = i2c_smbus_read_byte_data(new_client, + LM63_REG_CONFIG2); + reg_alert_status = i2c_smbus_read_byte_data(new_client, + LM63_REG_ALERT_STATUS); + reg_alert_mask = i2c_smbus_read_byte_data(new_client, + LM63_REG_ALERT_MASK); + + if (man_id != 0x01 /* National Semiconductor */ + || chip_id != 0x41 /* LM63 */ + || (reg_config1 & 0x18) != 0x00 + || (reg_config2 & 0xF8) != 0x00 + || (reg_alert_status & 0x20) != 0x00 + || (reg_alert_mask & 0xA4) != 0xA4) { + dev_dbg(&adapter->dev, + "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n", + man_id, chip_id); + return -ENODEV; } strlcpy(info->type, "lm63", I2C_NAME_SIZE); diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c new file mode 100644 index 000000000000..0bf8b2a8e9f0 --- /dev/null +++ b/drivers/hwmon/lm73.c @@ -0,0 +1,205 @@ +/* + * LM73 Sensor driver + * Based on LM75 + * + * Copyright (C) 2007, CenoSYS (www.cenosys.com). + * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu). + * + * Guillaume Ligneul <guillaume.ligneul@gmail.com> + * Adrien Demarez <adrien.demarez@bolloretelecom.eu> + * Jeremy Laine <jeremy.laine@bolloretelecom.eu> + * + * This software program is licensed subject to the GNU General Public License + * (GPL).Version 2,June 1991, available at + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> + + +/* Addresses scanned */ +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, + 0x4d, 0x4e, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(lm73); + +/* LM73 registers */ +#define LM73_REG_INPUT 0x00 +#define LM73_REG_CONF 0x01 +#define LM73_REG_MAX 0x02 +#define LM73_REG_MIN 0x03 +#define LM73_REG_CTRL 0x04 +#define LM73_REG_ID 0x07 + +#define LM73_ID 0x9001 /* or 0x190 after a swab16() */ +#define DRVNAME "lm73" +#define LM73_TEMP_MIN (-40) +#define LM73_TEMP_MAX 150 + +/*-----------------------------------------------------------------------*/ + + +static ssize_t set_temp(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + long temp; + short value; + + int status = strict_strtol(buf, 10, &temp); + if (status < 0) + return status; + + /* Write value */ + value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4), + (LM73_TEMP_MAX*4)) << 5; + i2c_smbus_write_word_data(client, attr->index, swab16(value)); + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + /* use integer division instead of equivalent right shift to + guarantee arithmetic shift and preserve the sign */ + int temp = ((s16) (swab16(i2c_smbus_read_word_data(client, + attr->index)))*250) / 32; + return sprintf(buf, "%d\n", temp); +} + + +/*-----------------------------------------------------------------------*/ + +/* sysfs attributes for hwmon */ + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_temp, set_temp, LM73_REG_MAX); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, + show_temp, set_temp, LM73_REG_MIN); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, + show_temp, NULL, LM73_REG_INPUT); + + +static struct attribute *lm73_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + + NULL +}; + +static const struct attribute_group lm73_group = { + .attrs = lm73_attributes, +}; + +/*-----------------------------------------------------------------------*/ + +/* device probe and removal */ + +static int +lm73_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *hwmon_dev; + int status; + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &lm73_group); + if (status) + return status; + + hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(hwmon_dev)) { + status = PTR_ERR(hwmon_dev); + goto exit_remove; + } + i2c_set_clientdata(client, hwmon_dev); + + dev_info(&client->dev, "%s: sensor '%s'\n", + dev_name(hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &lm73_group); + return status; +} + +static int lm73_remove(struct i2c_client *client) +{ + struct device *hwmon_dev = i2c_get_clientdata(client); + + hwmon_device_unregister(hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &lm73_group); + i2c_set_clientdata(client, NULL); + return 0; +} + +static const struct i2c_device_id lm73_ids[] = { + { "lm73", lm73 }, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, lm73_ids); + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm73_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + u16 id; + u8 ctrl; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + /* Check device ID */ + id = i2c_smbus_read_word_data(new_client, LM73_REG_ID); + ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL); + if ((id != LM73_ID) || (ctrl & 0x10)) + return -ENODEV; + + strlcpy(info->type, "lm73", I2C_NAME_SIZE); + + return 0; +} + +static struct i2c_driver lm73_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "lm73", + }, + .probe = lm73_probe, + .remove = lm73_remove, + .id_table = lm73_ids, + .detect = lm73_detect, + .address_data = &addr_data, +}; + +/* module glue */ + +static int __init sensors_lm73_init(void) +{ + return i2c_add_driver(&lm73_driver); +} + +static void __exit sensors_lm73_exit(void) +{ + i2c_del_driver(&lm73_driver); +} + +MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>"); +MODULE_DESCRIPTION("LM73 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm73_init); +module_exit(sensors_lm73_exit); diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 55bd87c15c9a..e392548cccb8 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -239,6 +239,7 @@ static int lm75_detect(struct i2c_client *new_client, int kind, { struct i2c_adapter *adapter = new_client->adapter; int i; + int cur, conf, hyst, os; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) @@ -251,40 +252,35 @@ static int lm75_detect(struct i2c_client *new_client, int kind, The cycling+unused addresses combination is not tested, since it would significantly slow the detection down and would hardly add any value. */ - if (kind < 0) { - int cur, conf, hyst, os; - - /* Unused addresses */ - cur = i2c_smbus_read_word_data(new_client, 0); - conf = i2c_smbus_read_byte_data(new_client, 1); - hyst = i2c_smbus_read_word_data(new_client, 2); - if (i2c_smbus_read_word_data(new_client, 4) != hyst - || i2c_smbus_read_word_data(new_client, 5) != hyst - || i2c_smbus_read_word_data(new_client, 6) != hyst - || i2c_smbus_read_word_data(new_client, 7) != hyst) - return -ENODEV; - os = i2c_smbus_read_word_data(new_client, 3); - if (i2c_smbus_read_word_data(new_client, 4) != os - || i2c_smbus_read_word_data(new_client, 5) != os - || i2c_smbus_read_word_data(new_client, 6) != os - || i2c_smbus_read_word_data(new_client, 7) != os) - return -ENODEV; - /* Unused bits */ - if (conf & 0xe0) - return -ENODEV; + /* Unused addresses */ + cur = i2c_smbus_read_word_data(new_client, 0); + conf = i2c_smbus_read_byte_data(new_client, 1); + hyst = i2c_smbus_read_word_data(new_client, 2); + if (i2c_smbus_read_word_data(new_client, 4) != hyst + || i2c_smbus_read_word_data(new_client, 5) != hyst + || i2c_smbus_read_word_data(new_client, 6) != hyst + || i2c_smbus_read_word_data(new_client, 7) != hyst) + return -ENODEV; + os = i2c_smbus_read_word_data(new_client, 3); + if (i2c_smbus_read_word_data(new_client, 4) != os + || i2c_smbus_read_word_data(new_client, 5) != os + || i2c_smbus_read_word_data(new_client, 6) != os + || i2c_smbus_read_word_data(new_client, 7) != os) + return -ENODEV; - /* Addresses cycling */ - for (i = 8; i < 0xff; i += 8) - if (i2c_smbus_read_byte_data(new_client, i + 1) != conf - || i2c_smbus_read_word_data(new_client, i + 2) != hyst - || i2c_smbus_read_word_data(new_client, i + 3) != os) - return -ENODEV; + /* Unused bits */ + if (conf & 0xe0) + return -ENODEV; + + /* Addresses cycling */ + for (i = 8; i < 0xff; i += 8) { + if (i2c_smbus_read_byte_data(new_client, i + 1) != conf + || i2c_smbus_read_word_data(new_client, i + 2) != hyst + || i2c_smbus_read_word_data(new_client, i + 3) != os) + return -ENODEV; } - /* NOTE: we treat "force=..." and "force_lm75=..." the same. - * Only new-style driver binding distinguishes chip types. - */ strlcpy(info->type, "lm75", I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index 866b401ab6e8..ac067fd19482 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -249,6 +249,7 @@ static int lm77_detect(struct i2c_client *new_client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = new_client->adapter; + int i, cur, conf, hyst, crit, min, max; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) @@ -265,51 +266,48 @@ static int lm77_detect(struct i2c_client *new_client, int kind, 4. registers cycling over 8-address boundaries Word-sized registers are high-byte first. */ - if (kind < 0) { - int i, cur, conf, hyst, crit, min, max; - - /* addresses cycling */ - cur = i2c_smbus_read_word_data(new_client, 0); - conf = i2c_smbus_read_byte_data(new_client, 1); - hyst = i2c_smbus_read_word_data(new_client, 2); - crit = i2c_smbus_read_word_data(new_client, 3); - min = i2c_smbus_read_word_data(new_client, 4); - max = i2c_smbus_read_word_data(new_client, 5); - for (i = 8; i <= 0xff; i += 8) - if (i2c_smbus_read_byte_data(new_client, i + 1) != conf - || i2c_smbus_read_word_data(new_client, i + 2) != hyst - || i2c_smbus_read_word_data(new_client, i + 3) != crit - || i2c_smbus_read_word_data(new_client, i + 4) != min - || i2c_smbus_read_word_data(new_client, i + 5) != max) - return -ENODEV; - - /* sign bits */ - if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0) - || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0) - || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0) - || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0) - || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0)) - return -ENODEV; - /* unused bits */ - if (conf & 0xe0) + /* addresses cycling */ + cur = i2c_smbus_read_word_data(new_client, 0); + conf = i2c_smbus_read_byte_data(new_client, 1); + hyst = i2c_smbus_read_word_data(new_client, 2); + crit = i2c_smbus_read_word_data(new_client, 3); + min = i2c_smbus_read_word_data(new_client, 4); + max = i2c_smbus_read_word_data(new_client, 5); + for (i = 8; i <= 0xff; i += 8) { + if (i2c_smbus_read_byte_data(new_client, i + 1) != conf + || i2c_smbus_read_word_data(new_client, i + 2) != hyst + || i2c_smbus_read_word_data(new_client, i + 3) != crit + || i2c_smbus_read_word_data(new_client, i + 4) != min + || i2c_smbus_read_word_data(new_client, i + 5) != max) return -ENODEV; + } - /* 0x06 and 0x07 return the last read value */ - cur = i2c_smbus_read_word_data(new_client, 0); - if (i2c_smbus_read_word_data(new_client, 6) != cur - || i2c_smbus_read_word_data(new_client, 7) != cur) - return -ENODEV; - hyst = i2c_smbus_read_word_data(new_client, 2); - if (i2c_smbus_read_word_data(new_client, 6) != hyst - || i2c_smbus_read_word_data(new_client, 7) != hyst) - return -ENODEV; - min = i2c_smbus_read_word_data(new_client, 4); - if (i2c_smbus_read_word_data(new_client, 6) != min - || i2c_smbus_read_word_data(new_client, 7) != min) - return -ENODEV; + /* sign bits */ + if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0) + || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0) + || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0) + || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0) + || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0)) + return -ENODEV; - } + /* unused bits */ + if (conf & 0xe0) + return -ENODEV; + + /* 0x06 and 0x07 return the last read value */ + cur = i2c_smbus_read_word_data(new_client, 0); + if (i2c_smbus_read_word_data(new_client, 6) != cur + || i2c_smbus_read_word_data(new_client, 7) != cur) + return -ENODEV; + hyst = i2c_smbus_read_word_data(new_client, 2); + if (i2c_smbus_read_word_data(new_client, 6) != hyst + || i2c_smbus_read_word_data(new_client, 7) != hyst) + return -ENODEV; + min = i2c_smbus_read_word_data(new_client, 4); + if (i2c_smbus_read_word_data(new_client, 6) != min + || i2c_smbus_read_word_data(new_client, 7) != min) + return -ENODEV; strlcpy(info->type, "lm77", I2C_NAME_SIZE); diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index f7e70163e016..5978291cebb3 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -576,52 +576,34 @@ static int lm78_i2c_detect(struct i2c_client *client, int kind, if (isa) mutex_lock(&isa->update_lock); - if (kind < 0) { - if ((i2c_smbus_read_byte_data(client, LM78_REG_CONFIG) & 0x80) - || i2c_smbus_read_byte_data(client, LM78_REG_I2C_ADDR) - != address) - goto err_nodev; - - /* Explicitly prevent the misdetection of Winbond chips */ - i = i2c_smbus_read_byte_data(client, 0x4f); - if (i == 0xa3 || i == 0x5c) - goto err_nodev; - } + if ((i2c_smbus_read_byte_data(client, LM78_REG_CONFIG) & 0x80) + || i2c_smbus_read_byte_data(client, LM78_REG_I2C_ADDR) != address) + goto err_nodev; + + /* Explicitly prevent the misdetection of Winbond chips */ + i = i2c_smbus_read_byte_data(client, 0x4f); + if (i == 0xa3 || i == 0x5c) + goto err_nodev; /* Determine the chip type. */ - if (kind <= 0) { - i = i2c_smbus_read_byte_data(client, LM78_REG_CHIPID); - if (i == 0x00 || i == 0x20 /* LM78 */ - || i == 0x40) /* LM78-J */ - kind = lm78; - else if ((i & 0xfe) == 0xc0) - kind = lm79; - else { - if (kind == 0) - dev_warn(&adapter->dev, "Ignoring 'force' " - "parameter for unknown chip at " - "adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), address); - goto err_nodev; - } + i = i2c_smbus_read_byte_data(client, LM78_REG_CHIPID); + if (i == 0x00 || i == 0x20 /* LM78 */ + || i == 0x40) /* LM78-J */ + client_name = "lm78"; + else if ((i & 0xfe) == 0xc0) + client_name = "lm79"; + else + goto err_nodev; - if (lm78_alias_detect(client, i)) { - dev_dbg(&adapter->dev, "Device at 0x%02x appears to " - "be the same as ISA device\n", address); - goto err_nodev; - } + if (lm78_alias_detect(client, i)) { + dev_dbg(&adapter->dev, "Device at 0x%02x appears to " + "be the same as ISA device\n", address); + goto err_nodev; } if (isa) mutex_unlock(&isa->update_lock); - switch (kind) { - case lm79: - client_name = "lm79"; - break; - default: - client_name = "lm78"; - } strlcpy(info->type, client_name, I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index e59e2d1f080c..08b03e6ed0b7 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -1,7 +1,7 @@ /* * lm83.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org> * * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is * a sensor chip made by National Semiconductor. It reports up to four @@ -295,69 +295,40 @@ static int lm83_detect(struct i2c_client *new_client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = new_client->adapter; - const char *name = ""; + const char *name; + u8 man_id, chip_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - /* Now we do the detection and identification. A negative kind - * means that the driver was loaded with no force parameter - * (default), so we must both detect and identify the chip - * (actually there is only one possible kind of chip for now, LM83). - * A zero kind means that the driver was loaded with the force - * parameter, the detection step shall be skipped. A positive kind - * means that the driver was loaded with the force parameter and a - * given kind of chip is requested, so both the detection and the - * identification steps are skipped. */ - - /* Default to an LM83 if forced */ - if (kind == 0) - kind = lm83; - - if (kind < 0) { /* detection */ - if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) - & 0xA8) != 0x00) || - ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) - & 0x48) != 0x00) || - ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) - & 0x41) != 0x00)) { - dev_dbg(&adapter->dev, - "LM83 detection failed at 0x%02x.\n", - new_client->addr); - return -ENODEV; - } + /* Detection */ + if ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) & 0xA8) || + (i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) & 0x48) || + (i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41)) { + dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n", + new_client->addr); + return -ENODEV; } - if (kind <= 0) { /* identification */ - u8 man_id, chip_id; - - man_id = i2c_smbus_read_byte_data(new_client, - LM83_REG_R_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - LM83_REG_R_CHIP_ID); - - if (man_id == 0x01) { /* National Semiconductor */ - if (chip_id == 0x03) { - kind = lm83; - } else - if (chip_id == 0x01) { - kind = lm82; - } - } - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%02X, " - "chip_id=0x%02X).\n", man_id, chip_id); - return -ENODEV; - } - } + /* Identification */ + man_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_MAN_ID); + if (man_id != 0x01) /* National Semiconductor */ + return -ENODEV; - if (kind == lm83) { + chip_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_CHIP_ID); + switch (chip_id) { + case 0x03: name = "lm83"; - } else - if (kind == lm82) { + break; + case 0x01: name = "lm82"; + break; + default: + /* identification failed */ + dev_info(&adapter->dev, + "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n", + man_id, chip_id); + return -ENODEV; } strlcpy(info->type, name, I2C_NAME_SIZE); diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 6c53d987de10..d56da2e74708 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -5,7 +5,7 @@ Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com> Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de> Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com> - Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2007--2009 Jean Delvare <khali@linux-fr.org> Chip details at <http://www.national.com/ds/LM/LM85.pdf> @@ -1162,107 +1162,80 @@ static int lm85_detect(struct i2c_client *client, int kind, struct i2c_adapter *adapter = client->adapter; int address = client->addr; const char *type_name; + int company, verstep; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { /* We need to be able to do byte I/O */ return -ENODEV; } - /* If auto-detecting, determine the chip type */ - if (kind < 0) { - int company = lm85_read_value(client, LM85_REG_COMPANY); - int verstep = lm85_read_value(client, LM85_REG_VERSTEP); - - dev_dbg(&adapter->dev, "Detecting device at 0x%02x with " - "COMPANY: 0x%02x and VERSTEP: 0x%02x\n", - address, company, verstep); - - /* All supported chips have the version in common */ - if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC && - (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) { - dev_dbg(&adapter->dev, "Autodetection failed: " - "unsupported version\n"); - return -ENODEV; - } - kind = any_chip; - - /* Now, refine the detection */ - if (company == LM85_COMPANY_NATIONAL) { - switch (verstep) { - case LM85_VERSTEP_LM85C: - kind = lm85c; - break; - case LM85_VERSTEP_LM85B: - kind = lm85b; - break; - case LM85_VERSTEP_LM96000_1: - case LM85_VERSTEP_LM96000_2: - /* Check for Winbond WPCD377I */ - if (lm85_is_fake(client)) { - dev_dbg(&adapter->dev, - "Found Winbond WPCD377I, " - "ignoring\n"); - return -ENODEV; - } - break; - } - } else if (company == LM85_COMPANY_ANALOG_DEV) { - switch (verstep) { - case LM85_VERSTEP_ADM1027: - kind = adm1027; - break; - case LM85_VERSTEP_ADT7463: - case LM85_VERSTEP_ADT7463C: - kind = adt7463; - break; - case LM85_VERSTEP_ADT7468_1: - case LM85_VERSTEP_ADT7468_2: - kind = adt7468; - break; - } - } else if (company == LM85_COMPANY_SMSC) { - switch (verstep) { - case LM85_VERSTEP_EMC6D100_A0: - case LM85_VERSTEP_EMC6D100_A1: - /* Note: we can't tell a '100 from a '101 */ - kind = emc6d100; - break; - case LM85_VERSTEP_EMC6D102: - kind = emc6d102; - break; + /* Determine the chip type */ + company = lm85_read_value(client, LM85_REG_COMPANY); + verstep = lm85_read_value(client, LM85_REG_VERSTEP); + + dev_dbg(&adapter->dev, "Detecting device at 0x%02x with " + "COMPANY: 0x%02x and VERSTEP: 0x%02x\n", + address, company, verstep); + + /* All supported chips have the version in common */ + if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC && + (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) { + dev_dbg(&adapter->dev, + "Autodetection failed: unsupported version\n"); + return -ENODEV; + } + type_name = "lm85"; + + /* Now, refine the detection */ + if (company == LM85_COMPANY_NATIONAL) { + switch (verstep) { + case LM85_VERSTEP_LM85C: + type_name = "lm85c"; + break; + case LM85_VERSTEP_LM85B: + type_name = "lm85b"; + break; + case LM85_VERSTEP_LM96000_1: + case LM85_VERSTEP_LM96000_2: + /* Check for Winbond WPCD377I */ + if (lm85_is_fake(client)) { + dev_dbg(&adapter->dev, + "Found Winbond WPCD377I, ignoring\n"); + return -ENODEV; } - } else { - dev_dbg(&adapter->dev, "Autodetection failed: " - "unknown vendor\n"); - return -ENODEV; + break; + } + } else if (company == LM85_COMPANY_ANALOG_DEV) { + switch (verstep) { + case LM85_VERSTEP_ADM1027: + type_name = "adm1027"; + break; + case LM85_VERSTEP_ADT7463: + case LM85_VERSTEP_ADT7463C: + type_name = "adt7463"; + break; + case LM85_VERSTEP_ADT7468_1: + case LM85_VERSTEP_ADT7468_2: + type_name = "adt7468"; + break; } + } else if (company == LM85_COMPANY_SMSC) { + switch (verstep) { + case LM85_VERSTEP_EMC6D100_A0: + case LM85_VERSTEP_EMC6D100_A1: + /* Note: we can't tell a '100 from a '101 */ + type_name = "emc6d100"; + break; + case LM85_VERSTEP_EMC6D102: + type_name = "emc6d102"; + break; + } + } else { + dev_dbg(&adapter->dev, + "Autodetection failed: unknown vendor\n"); + return -ENODEV; } - switch (kind) { - case lm85b: - type_name = "lm85b"; - break; - case lm85c: - type_name = "lm85c"; - break; - case adm1027: - type_name = "adm1027"; - break; - case adt7463: - type_name = "adt7463"; - break; - case adt7468: - type_name = "adt7468"; - break; - case emc6d100: - type_name = "emc6d100"; - break; - case emc6d102: - type_name = "emc6d102"; - break; - default: - type_name = "lm85"; - } strlcpy(info->type, type_name, I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index 2e4a3cea95f7..4929b1815eee 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -666,37 +666,32 @@ static int lm87_detect(struct i2c_client *new_client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = new_client->adapter; - static const char *names[] = { "lm87", "adm1024" }; + const char *name; + u8 cid, rev; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - /* Default to an LM87 if forced */ - if (kind == 0) - kind = lm87; + if (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80) + return -ENODEV; /* Now, we do the remaining detection. */ - if (kind < 0) { - u8 cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID); - u8 rev = lm87_read_value(new_client, LM87_REG_REVISION); - - if (cid == 0x02 /* National Semiconductor */ - && (rev >= 0x01 && rev <= 0x08)) - kind = lm87; - else if (cid == 0x41 /* Analog Devices */ - && (rev & 0xf0) == 0x10) - kind = adm1024; - - if (kind < 0 - || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) { - dev_dbg(&adapter->dev, - "LM87 detection failed at 0x%02x.\n", - new_client->addr); - return -ENODEV; - } + cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID); + rev = lm87_read_value(new_client, LM87_REG_REVISION); + + if (cid == 0x02 /* National Semiconductor */ + && (rev >= 0x01 && rev <= 0x08)) + name = "lm87"; + else if (cid == 0x41 /* Analog Devices */ + && (rev & 0xf0) == 0x10) + name = "adm1024"; + else { + dev_dbg(&adapter->dev, "LM87 detection failed at 0x%02x\n", + new_client->addr); + return -ENODEV; } - strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE); + strlcpy(info->type, name, I2C_NAME_SIZE); return 0; } diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 1aff7575799d..b7c905f50ed4 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -1,7 +1,7 @@ /* * lm90.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org> * * Based on the lm83 driver. The LM90 is a sensor chip made by National * Semiconductor. It reports up to two temperatures (its own plus up to @@ -661,154 +661,118 @@ static int lm90_detect(struct i2c_client *new_client, int kind, { struct i2c_adapter *adapter = new_client->adapter; int address = new_client->addr; - const char *name = ""; + const char *name = NULL; + int man_id, chip_id, reg_config1, reg_convrate; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip. A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - - /* Default to an LM90 if forced */ - if (kind == 0) - kind = lm90; - - if (kind < 0) { /* detection and identification */ - int man_id, chip_id, reg_config1, reg_convrate; - - if ((man_id = i2c_smbus_read_byte_data(new_client, + /* detection and identification */ + if ((man_id = i2c_smbus_read_byte_data(new_client, LM90_REG_R_MAN_ID)) < 0 - || (chip_id = i2c_smbus_read_byte_data(new_client, + || (chip_id = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CHIP_ID)) < 0 - || (reg_config1 = i2c_smbus_read_byte_data(new_client, + || (reg_config1 = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CONFIG1)) < 0 - || (reg_convrate = i2c_smbus_read_byte_data(new_client, + || (reg_convrate = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CONVRATE)) < 0) + return -ENODEV; + + if ((address == 0x4C || address == 0x4D) + && man_id == 0x01) { /* National Semiconductor */ + int reg_config2; + + reg_config2 = i2c_smbus_read_byte_data(new_client, + LM90_REG_R_CONFIG2); + if (reg_config2 < 0) return -ENODEV; - - if ((address == 0x4C || address == 0x4D) - && man_id == 0x01) { /* National Semiconductor */ - int reg_config2; - - if ((reg_config2 = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONFIG2)) < 0) - return -ENODEV; - - if ((reg_config1 & 0x2A) == 0x00 - && (reg_config2 & 0xF8) == 0x00 - && reg_convrate <= 0x09) { - if (address == 0x4C - && (chip_id & 0xF0) == 0x20) { /* LM90 */ - kind = lm90; - } else - if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */ - kind = lm99; - dev_info(&adapter->dev, - "Assuming LM99 chip at " - "0x%02x\n", address); - dev_info(&adapter->dev, - "If it is an LM89, pass " - "force_lm86=%d,0x%02x when " - "loading the lm90 driver\n", - i2c_adapter_id(adapter), - address); - } else - if (address == 0x4C - && (chip_id & 0xF0) == 0x10) { /* LM86 */ - kind = lm86; - } - } - } else - if ((address == 0x4C || address == 0x4D) - && man_id == 0x41) { /* Analog Devices */ - if ((chip_id & 0xF0) == 0x40 /* ADM1032 */ - && (reg_config1 & 0x3F) == 0x00 - && reg_convrate <= 0x0A) { - kind = adm1032; - } else - if (chip_id == 0x51 /* ADT7461 */ - && (reg_config1 & 0x1B) == 0x00 - && reg_convrate <= 0x0A) { - kind = adt7461; - } - } else - if (man_id == 0x4D) { /* Maxim */ - /* - * The MAX6657, MAX6658 and MAX6659 do NOT have a - * chip_id register. Reading from that address will - * return the last read value, which in our case is - * those of the man_id register. Likewise, the config1 - * register seems to lack a low nibble, so the value - * will be those of the previous read, so in our case - * those of the man_id register. - */ - if (chip_id == man_id - && (address == 0x4C || address == 0x4D) - && (reg_config1 & 0x1F) == (man_id & 0x0F) - && reg_convrate <= 0x09) { - kind = max6657; + + if ((reg_config1 & 0x2A) == 0x00 + && (reg_config2 & 0xF8) == 0x00 + && reg_convrate <= 0x09) { + if (address == 0x4C + && (chip_id & 0xF0) == 0x20) { /* LM90 */ + name = "lm90"; } else - /* The chip_id register of the MAX6680 and MAX6681 - * holds the revision of the chip. - * the lowest bit of the config1 register is unused - * and should return zero when read, so should the - * second to last bit of config1 (software reset) - */ - if (chip_id == 0x01 - && (reg_config1 & 0x03) == 0x00 - && reg_convrate <= 0x07) { - kind = max6680; + if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */ + name = "lm99"; + dev_info(&adapter->dev, + "Assuming LM99 chip at 0x%02x\n", + address); + dev_info(&adapter->dev, + "If it is an LM89, instantiate it " + "with the new_device sysfs " + "interface\n"); } else - /* The chip_id register of the MAX6646/6647/6649 - * holds the revision of the chip. - * The lowest 6 bits of the config1 register are - * unused and should return zero when read. - */ - if (chip_id == 0x59 - && (reg_config1 & 0x3f) == 0x00 - && reg_convrate <= 0x07) { - kind = max6646; + if (address == 0x4C + && (chip_id & 0xF0) == 0x10) { /* LM86 */ + name = "lm86"; } } - - if (kind <= 0) { /* identification failed */ - dev_dbg(&adapter->dev, - "Unsupported chip at 0x%02x (man_id=0x%02X, " - "chip_id=0x%02X)\n", address, man_id, chip_id); - return -ENODEV; + } else + if ((address == 0x4C || address == 0x4D) + && man_id == 0x41) { /* Analog Devices */ + if ((chip_id & 0xF0) == 0x40 /* ADM1032 */ + && (reg_config1 & 0x3F) == 0x00 + && reg_convrate <= 0x0A) { + name = "adm1032"; + /* The ADM1032 supports PEC, but only if combined + transactions are not used. */ + if (i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_BYTE)) + info->flags |= I2C_CLIENT_PEC; + } else + if (chip_id == 0x51 /* ADT7461 */ + && (reg_config1 & 0x1B) == 0x00 + && reg_convrate <= 0x0A) { + name = "adt7461"; + } + } else + if (man_id == 0x4D) { /* Maxim */ + /* + * The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id + * register. Reading from that address will return the last + * read value, which in our case is those of the man_id + * register. Likewise, the config1 register seems to lack a + * low nibble, so the value will be those of the previous + * read, so in our case those of the man_id register. + */ + if (chip_id == man_id + && (address == 0x4C || address == 0x4D) + && (reg_config1 & 0x1F) == (man_id & 0x0F) + && reg_convrate <= 0x09) { + name = "max6657"; + } else + /* + * The chip_id register of the MAX6680 and MAX6681 holds the + * revision of the chip. The lowest bit of the config1 register + * is unused and should return zero when read, so should the + * second to last bit of config1 (software reset). + */ + if (chip_id == 0x01 + && (reg_config1 & 0x03) == 0x00 + && reg_convrate <= 0x07) { + name = "max6680"; + } else + /* + * The chip_id register of the MAX6646/6647/6649 holds the + * revision of the chip. The lowest 6 bits of the config1 + * register are unused and should return zero when read. + */ + if (chip_id == 0x59 + && (reg_config1 & 0x3f) == 0x00 + && reg_convrate <= 0x07) { + name = "max6646"; } } - /* Fill the i2c board info */ - if (kind == lm90) { - name = "lm90"; - } else if (kind == adm1032) { - name = "adm1032"; - /* The ADM1032 supports PEC, but only if combined - transactions are not used. */ - if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) - info->flags |= I2C_CLIENT_PEC; - } else if (kind == lm99) { - name = "lm99"; - } else if (kind == lm86) { - name = "lm86"; - } else if (kind == max6657) { - name = "max6657"; - } else if (kind == max6680) { - name = "max6680"; - } else if (kind == adt7461) { - name = "adt7461"; - } else if (kind == max6646) { - name = "max6646"; + if (!name) { /* identification failed */ + dev_dbg(&adapter->dev, + "Unsupported chip at 0x%02x (man_id=0x%02X, " + "chip_id=0x%02X)\n", address, man_id, chip_id); + return -ENODEV; } + strlcpy(info->type, name, I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index b2e00c5a7eec..47ac698709dc 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -323,31 +323,22 @@ static int lm92_detect(struct i2c_client *new_client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = new_client->adapter; + u8 config; + u16 man_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) return -ENODEV; - /* A negative kind means that the driver was loaded with no force - parameter (default), so we must identify the chip. */ - if (kind < 0) { - u8 config = i2c_smbus_read_byte_data(new_client, - LM92_REG_CONFIG); - u16 man_id = i2c_smbus_read_word_data(new_client, - LM92_REG_MAN_ID); - - if ((config & 0xe0) == 0x00 - && man_id == 0x0180) { - pr_info("lm92: Found National Semiconductor LM92 chip\n"); - kind = lm92; - } else - if (max6635_check(new_client)) { - pr_info("lm92: Found Maxim MAX6635 chip\n"); - kind = lm92; /* No separate prefix */ - } - else - return -ENODEV; - } + config = i2c_smbus_read_byte_data(new_client, LM92_REG_CONFIG); + man_id = i2c_smbus_read_word_data(new_client, LM92_REG_MAN_ID); + + if ((config & 0xe0) == 0x00 && man_id == 0x0180) + pr_info("lm92: Found National Semiconductor LM92 chip\n"); + else if (max6635_check(new_client)) + pr_info("lm92: Found Maxim MAX6635 chip\n"); + else + return -ENODEV; strlcpy(info->type, "lm92", I2C_NAME_SIZE); diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index c48a284b8314..124dd7cea54c 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -2505,34 +2505,24 @@ static int lm93_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + int mfr, ver; if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN)) return -ENODEV; /* detection */ - if (kind < 0) { - int mfr = lm93_read_byte(client, LM93_REG_MFR_ID); - - if (mfr != 0x01) { - dev_dbg(&adapter->dev,"detect failed, " - "bad manufacturer id 0x%02x!\n", mfr); - return -ENODEV; - } + mfr = lm93_read_byte(client, LM93_REG_MFR_ID); + if (mfr != 0x01) { + dev_dbg(&adapter->dev, + "detect failed, bad manufacturer id 0x%02x!\n", mfr); + return -ENODEV; } - if (kind <= 0) { - int ver = lm93_read_byte(client, LM93_REG_VER); - - if ((ver == LM93_MFR_ID) || (ver == LM93_MFR_ID_PROTOTYPE)) { - kind = lm93; - } else { - dev_dbg(&adapter->dev,"detect failed, " - "bad version id 0x%02x!\n", ver); - if (kind == 0) - dev_dbg(&adapter->dev, - "(ignored 'force' parameter)\n"); - return -ENODEV; - } + ver = lm93_read_byte(client, LM93_REG_VER); + if (ver != LM93_MFR_ID && ver != LM93_MFR_ID_PROTOTYPE) { + dev_dbg(&adapter->dev, + "detect failed, bad version id 0x%02x!\n", ver); + return -ENODEV; } strlcpy(info->type, "lm93", I2C_NAME_SIZE); diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index e34f9e402a2c..906b896cf1d0 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -315,51 +315,23 @@ static int lm95241_detect(struct i2c_client *new_client, int kind, { struct i2c_adapter *adapter = new_client->adapter; int address = new_client->addr; - const char *name = ""; + const char *name; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip. A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - if (kind < 0) { /* detection */ - if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) - != MANUFACTURER_ID) - || (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) - < DEFAULT_REVISION)) { - dev_dbg(&adapter->dev, - "LM95241 detection failed at 0x%02x.\n", - address); - return -ENODEV; - } - } - - if (kind <= 0) { /* identification */ - if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) - == MANUFACTURER_ID) - && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) - >= DEFAULT_REVISION)) { - - kind = lm95241; - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, "Unsupported chip\n"); - return -ENODEV; - } - } + if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) + == MANUFACTURER_ID) + && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) + >= DEFAULT_REVISION)) { + name = "lm95241"; + } else { + dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n", + address); + return -ENODEV; } /* Fill the i2c board info */ - if (kind == lm95241) - name = "lm95241"; strlcpy(info->type, name, I2C_NAME_SIZE); return 0; } diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index 7897754f3a5c..7fcf5ff89e7f 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -226,58 +226,34 @@ static const struct attribute_group max1619_group = { */ /* Return 0 if detection is successful, -ENODEV otherwise */ -static int max1619_detect(struct i2c_client *new_client, int kind, +static int max1619_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { - struct i2c_adapter *adapter = new_client->adapter; - u8 reg_config=0, reg_convrate=0, reg_status=0; + struct i2c_adapter *adapter = client->adapter; + u8 reg_config, reg_convrate, reg_status, man_id, chip_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip. A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - if (kind < 0) { /* detection */ - reg_config = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_CONFIG); - reg_convrate = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_CONVRATE); - reg_status = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_STATUS); - if ((reg_config & 0x03) != 0x00 - || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) { - dev_dbg(&adapter->dev, - "MAX1619 detection failed at 0x%02x.\n", - new_client->addr); - return -ENODEV; - } + /* detection */ + reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); + reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE); + reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS); + if ((reg_config & 0x03) != 0x00 + || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) { + dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n", + client->addr); + return -ENODEV; } - if (kind <= 0) { /* identification */ - u8 man_id, chip_id; - - man_id = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_CHIP_ID); - - if ((man_id == 0x4D) && (chip_id == 0x04)) - kind = max1619; - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%02X, " - "chip_id=0x%02X).\n", man_id, chip_id); - return -ENODEV; - } + /* identification */ + man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID); + chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID); + if (man_id != 0x4D || chip_id != 0x04) { + dev_info(&adapter->dev, + "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n", + man_id, chip_id); + return -ENODEV; } strlcpy(info->type, "max1619", I2C_NAME_SIZE); diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 58f66be61b1f..1da561e0cb37 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -534,7 +534,7 @@ static int max6650_detect(struct i2c_client *client, int kind, struct i2c_adapter *adapter = client->adapter; int address = client->addr; - dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind); + dev_dbg(&adapter->dev, "max6650_detect called\n"); if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support " @@ -542,23 +542,7 @@ static int max6650_detect(struct i2c_client *client, int kind, return -ENODEV; } - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip (actually there is only - * one possible kind of chip for now, max6650). A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - * - * Currently I can find no way to distinguish between a MAX6650 and - * a MAX6651. This driver has only been tried on the former. - */ - - if ((kind < 0) && - ( (i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0) + if (((i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0) ||(i2c_smbus_read_byte_data(client, MAX6650_REG_GPIO_STAT) & 0xE0) ||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN) & 0xE0) ||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM) & 0xE0) diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c new file mode 100644 index 000000000000..883fa8197da4 --- /dev/null +++ b/drivers/hwmon/mc13783-adc.c @@ -0,0 +1,236 @@ +/* + * Driver for the Freescale Semiconductor MC13783 adc. + * + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/mfd/mc13783-private.h> +#include <linux/platform_device.h> +#include <linux/hwmon-sysfs.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/hwmon.h> +#include <linux/init.h> +#include <linux/err.h> + +#define MC13783_ADC_NAME "mc13783-adc" + +struct mc13783_adc_priv { + struct mc13783 *mc13783; + struct device *hwmon_dev; +}; + +static ssize_t mc13783_adc_show_name(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + return sprintf(buf, "mc13783_adc\n"); +} + +static int mc13783_adc_read(struct device *dev, + struct device_attribute *devattr, unsigned int *val) +{ + struct platform_device *pdev = to_platform_device(dev); + struct mc13783_adc_priv *priv = platform_get_drvdata(pdev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + unsigned int channel = attr->index; + unsigned int sample[4]; + int ret; + + ret = mc13783_adc_do_conversion(priv->mc13783, + MC13783_ADC_MODE_MULT_CHAN, + channel, sample); + if (ret) + return ret; + + channel &= 0x7; + + *val = (sample[channel % 4] >> (channel > 3 ? 14 : 2)) & 0x3ff; + + return 0; +} + +static ssize_t mc13783_adc_read_bp(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + unsigned val; + int ret = mc13783_adc_read(dev, devattr, &val); + + if (ret) + return ret; + + /* + * BP (channel 2) reports with offset 2.4V to the actual value to fit + * the input range of the ADC. unit = 2.25mV = 9/4 mV. + */ + val = DIV_ROUND_CLOSEST(val * 9, 4) + 2400; + + return sprintf(buf, "%u\n", val); +} + +static ssize_t mc13783_adc_read_gp(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + unsigned val; + int ret = mc13783_adc_read(dev, devattr, &val); + + if (ret) + return ret; + + /* + * input range is [0, 2.3V], val has 10 bits, so each bit + * is worth 9/4 mV. + */ + val = DIV_ROUND_CLOSEST(val * 9, 4); + + return sprintf(buf, "%u\n", val); +} + +static DEVICE_ATTR(name, S_IRUGO, mc13783_adc_show_name, NULL); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, mc13783_adc_read_bp, NULL, 2); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, mc13783_adc_read_gp, NULL, 5); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, mc13783_adc_read_gp, NULL, 6); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, mc13783_adc_read_gp, NULL, 7); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, mc13783_adc_read_gp, NULL, 8); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, mc13783_adc_read_gp, NULL, 9); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, mc13783_adc_read_gp, NULL, 10); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, mc13783_adc_read_gp, NULL, 11); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, mc13783_adc_read_gp, NULL, 12); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, mc13783_adc_read_gp, NULL, 13); +static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, mc13783_adc_read_gp, NULL, 14); +static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, mc13783_adc_read_gp, NULL, 15); + +static struct attribute *mc13783_attr[] = { + &dev_attr_name.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group mc13783_group = { + .attrs = mc13783_attr, +}; + +/* last four channels may be occupied by the touchscreen */ +static struct attribute *mc13783_attr_ts[] = { + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + &sensor_dev_attr_in14_input.dev_attr.attr, + &sensor_dev_attr_in15_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group mc13783_group_ts = { + .attrs = mc13783_attr_ts, +}; + +static int __init mc13783_adc_probe(struct platform_device *pdev) +{ + struct mc13783_adc_priv *priv; + int ret; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->mc13783 = dev_get_drvdata(pdev->dev.parent); + + platform_set_drvdata(pdev, priv); + + /* Register sysfs hooks */ + ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group); + if (ret) + goto out_err_create1; + + if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN)) + ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts); + if (ret) + goto out_err_create2; + + priv->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(priv->hwmon_dev)) { + ret = PTR_ERR(priv->hwmon_dev); + dev_err(&pdev->dev, + "hwmon_device_register failed with %d.\n", ret); + goto out_err_register; + } + + + return 0; + +out_err_register: + + if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN)) + sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts); +out_err_create2: + + sysfs_remove_group(&pdev->dev.kobj, &mc13783_group); +out_err_create1: + + platform_set_drvdata(pdev, NULL); + kfree(priv); + + return ret; +} + +static int __devexit mc13783_adc_remove(struct platform_device *pdev) +{ + struct mc13783_adc_priv *priv = platform_get_drvdata(pdev); + + hwmon_device_unregister(priv->hwmon_dev); + + if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN)) + sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts); + + sysfs_remove_group(&pdev->dev.kobj, &mc13783_group); + + platform_set_drvdata(pdev, NULL); + kfree(priv); + + return 0; +} + +static struct platform_driver mc13783_adc_driver = { + .remove = __devexit_p(mc13783_adc_remove), + .driver = { + .owner = THIS_MODULE, + .name = MC13783_ADC_NAME, + }, +}; + +static int __init mc13783_adc_init(void) +{ + return platform_driver_probe(&mc13783_adc_driver, mc13783_adc_probe); +} + +static void __exit mc13783_adc_exit(void) +{ + platform_driver_unregister(&mc13783_adc_driver); +} + +module_init(mc13783_adc_init); +module_exit(mc13783_adc_exit); + +MODULE_DESCRIPTION("MC13783 ADC driver"); +MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" MC13783_ADC_NAME); diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index 71835412529f..3f3f9a47acfd 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -323,7 +323,7 @@ static int __devinit s3c_hwmon_probe(struct platform_device *dev) } for (i = 0; i < ARRAY_SIZE(pdata->in); i++) { - struct s3c24xx_adc_hwmon_incfg *cfg = pdata->in[i]; + struct s3c_hwmon_chcfg *cfg = pdata->in[i]; if (!cfg) continue; @@ -333,7 +333,7 @@ static int __devinit s3c_hwmon_probe(struct platform_device *dev) "channel %d multiplier too large\n", i); - if (cfg->divider == 0) { + if (cfg->div == 0) { dev_err(&dev->dev, "channel %d divider zero\n", i); continue; } diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c index 8bb5cb532d4d..4d88c045781c 100644 --- a/drivers/hwmon/smsc47m192.c +++ b/drivers/hwmon/smsc47m192.c @@ -491,24 +491,22 @@ static int smsc47m192_detect(struct i2c_client *client, int kind, return -ENODEV; /* Detection criteria from sensors_detect script */ - if (kind < 0) { - if (i2c_smbus_read_byte_data(client, + version = i2c_smbus_read_byte_data(client, SMSC47M192_REG_VERSION); + if (i2c_smbus_read_byte_data(client, SMSC47M192_REG_COMPANY_ID) == 0x55 - && ((version = i2c_smbus_read_byte_data(client, - SMSC47M192_REG_VERSION)) & 0xf0) == 0x20 - && (i2c_smbus_read_byte_data(client, + && (version & 0xf0) == 0x20 + && (i2c_smbus_read_byte_data(client, SMSC47M192_REG_VID) & 0x70) == 0x00 - && (i2c_smbus_read_byte_data(client, + && (i2c_smbus_read_byte_data(client, SMSC47M192_REG_VID4) & 0xfe) == 0x80) { - dev_info(&adapter->dev, - "found SMSC47M192 or compatible, " - "version 2, stepping A%d\n", version & 0x0f); - } else { - dev_dbg(&adapter->dev, - "SMSC47M192 detection failed at 0x%02x\n", - client->addr); - return -ENODEV; - } + dev_info(&adapter->dev, + "found SMSC47M192 or compatible, " + "version 2, stepping A%d\n", version & 0x0f); + } else { + dev_dbg(&adapter->dev, + "SMSC47M192 detection failed at 0x%02x\n", + client->addr); + return -ENODEV; } strlcpy(info->type, "smsc47m192", I2C_NAME_SIZE); diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c index 7d97431e132f..4b793849c738 100644 --- a/drivers/hwmon/thmc50.c +++ b/drivers/hwmon/thmc50.c @@ -36,7 +36,11 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_2(thmc50, adm1022); -I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs " + +static unsigned short adm1022_temp3[16]; +static unsigned int adm1022_temp3_num; +module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0); +MODULE_PARM_DESC(adm1022_temp3, "List of adapter,address pairs " "to enable 3rd temperature (ADM1022 only)"); /* Many THMC50 constants specified below */ @@ -289,7 +293,6 @@ static int thmc50_detect(struct i2c_client *client, int kind, unsigned revision; unsigned config; struct i2c_adapter *adapter = client->adapter; - int err = 0; const char *type_name; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { @@ -301,31 +304,13 @@ static int thmc50_detect(struct i2c_client *client, int kind, pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n", client->addr, i2c_adapter_id(client->adapter)); - /* Now, we do the remaining detection. */ company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID); revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE); config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); + if (revision < 0xc0 || (config & 0x10)) + return -ENODEV; - if (kind == 0) - kind = thmc50; - else if (kind < 0) { - err = -ENODEV; - if (revision >= 0xc0 && ((config & 0x10) == 0)) { - if (company == 0x49) { - kind = thmc50; - err = 0; - } else if (company == 0x41) { - kind = adm1022; - err = 0; - } - } - } - if (err == -ENODEV) { - pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n"); - return err; - } - - if (kind == adm1022) { + if (company == 0x41) { int id = i2c_adapter_id(client->adapter); int i; @@ -340,9 +325,13 @@ static int thmc50_detect(struct i2c_client *client, int kind, config); break; } - } else { + } else if (company == 0x49) { type_name = "thmc50"; + } else { + pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n"); + return -ENODEV; } + pr_debug("thmc50: Detected %s (version %x, revision %x)\n", type_name, (revision >> 4) - 0xc, revision & 0xf); diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index 7b34f2cd08bb..ee9673467c4a 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -488,46 +488,43 @@ static void tmp401_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config); } -static int tmp401_detect(struct i2c_client *client, int kind, +static int tmp401_detect(struct i2c_client *client, int _kind, struct i2c_board_info *info) { + enum chips kind; struct i2c_adapter *adapter = client->adapter; + u8 reg; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; /* Detect and identify the chip */ - if (kind <= 0) { - u8 reg; - - reg = i2c_smbus_read_byte_data(client, - TMP401_MANUFACTURER_ID_REG); - if (reg != TMP401_MANUFACTURER_ID) - return -ENODEV; - - reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG); - - switch (reg) { - case TMP401_DEVICE_ID: - kind = tmp401; - break; - case TMP411_DEVICE_ID: - kind = tmp411; - break; - default: - return -ENODEV; - } + reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG); + if (reg != TMP401_MANUFACTURER_ID) + return -ENODEV; - reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ); - if (reg & 0x1b) - return -ENODEV; + reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG); - reg = i2c_smbus_read_byte_data(client, - TMP401_CONVERSION_RATE_READ); - /* Datasheet says: 0x1-0x6 */ - if (reg > 15) - return -ENODEV; + switch (reg) { + case TMP401_DEVICE_ID: + kind = tmp401; + break; + case TMP411_DEVICE_ID: + kind = tmp411; + break; + default: + return -ENODEV; } + + reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ); + if (reg & 0x1b) + return -ENODEV; + + reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ); + /* Datasheet says: 0x1-0x6 */ + if (reg > 15) + return -ENODEV; + strlcpy(info->type, tmp401_id[kind - 1].name, I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index 20924343431b..bb5464a289ca 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -223,39 +223,36 @@ static int tmp421_init_client(struct i2c_client *client) return 0; } -static int tmp421_detect(struct i2c_client *client, int kind, +static int tmp421_detect(struct i2c_client *client, int _kind, struct i2c_board_info *info) { + enum chips kind; struct i2c_adapter *adapter = client->adapter; const char *names[] = { "TMP421", "TMP422", "TMP423" }; + u8 reg; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - if (kind <= 0) { - u8 reg; - - reg = i2c_smbus_read_byte_data(client, - TMP421_MANUFACTURER_ID_REG); - if (reg != TMP421_MANUFACTURER_ID) - return -ENODEV; - - reg = i2c_smbus_read_byte_data(client, - TMP421_DEVICE_ID_REG); - switch (reg) { - case TMP421_DEVICE_ID: - kind = tmp421; - break; - case TMP422_DEVICE_ID: - kind = tmp422; - break; - case TMP423_DEVICE_ID: - kind = tmp423; - break; - default: - return -ENODEV; - } + reg = i2c_smbus_read_byte_data(client, TMP421_MANUFACTURER_ID_REG); + if (reg != TMP421_MANUFACTURER_ID) + return -ENODEV; + + reg = i2c_smbus_read_byte_data(client, TMP421_DEVICE_ID_REG); + switch (reg) { + case TMP421_DEVICE_ID: + kind = tmp421; + break; + case TMP422_DEVICE_ID: + kind = tmp422; + break; + case TMP423_DEVICE_ID: + kind = tmp423; + break; + default: + return -ENODEV; } + strlcpy(info->type, tmp421_id[kind - 1].name, I2C_NAME_SIZE); dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n", names[kind - 1], client->addr); diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 2be28ac4ede0..b257c7223733 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -59,10 +59,11 @@ static struct platform_device *pdev; #define DRVNAME "w83627hf" enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf }; -static u16 force_addr; -module_param(force_addr, ushort, 0); -MODULE_PARM_DESC(force_addr, - "Initialize the base address of the sensors"); +struct w83627hf_sio_data { + enum chips type; + int sioaddr; +}; + static u8 force_i2c = 0x1f; module_param(force_i2c, byte, 0); MODULE_PARM_DESC(force_i2c, @@ -77,9 +78,7 @@ module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); /* modified from kernel/include/traps.c */ -static int REG; /* The register to read/write */ #define DEV 0x07 /* Register: Logical device select */ -static int VAL; /* The value to read/write */ /* logical device numbers for superio_select (below) */ #define W83627HF_LD_FDC 0x00 @@ -109,37 +108,37 @@ static int VAL; /* The value to read/write */ #define W83687THF_VID_DATA 0xF1 /* w83687thf only */ static inline void -superio_outb(int reg, int val) +superio_outb(struct w83627hf_sio_data *sio, int reg, int val) { - outb(reg, REG); - outb(val, VAL); + outb(reg, sio->sioaddr); + outb(val, sio->sioaddr + 1); } static inline int -superio_inb(int reg) +superio_inb(struct w83627hf_sio_data *sio, int reg) { - outb(reg, REG); - return inb(VAL); + outb(reg, sio->sioaddr); + return inb(sio->sioaddr + 1); } static inline void -superio_select(int ld) +superio_select(struct w83627hf_sio_data *sio, int ld) { - outb(DEV, REG); - outb(ld, VAL); + outb(DEV, sio->sioaddr); + outb(ld, sio->sioaddr + 1); } static inline void -superio_enter(void) +superio_enter(struct w83627hf_sio_data *sio) { - outb(0x87, REG); - outb(0x87, REG); + outb(0x87, sio->sioaddr); + outb(0x87, sio->sioaddr); } static inline void -superio_exit(void) +superio_exit(struct w83627hf_sio_data *sio) { - outb(0xAA, REG); + outb(0xAA, sio->sioaddr); } #define W627_DEVID 0x52 @@ -380,10 +379,6 @@ struct w83627hf_data { u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */ }; -struct w83627hf_sio_data { - enum chips type; -}; - static int w83627hf_probe(struct platform_device *pdev); static int __devexit w83627hf_remove(struct platform_device *pdev); @@ -1140,11 +1135,8 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, "W83687THF", }; - REG = sioaddr; - VAL = sioaddr + 1; - - superio_enter(); - val = force_id ? force_id : superio_inb(DEVID); + superio_enter(sio_data); + val = force_id ? force_id : superio_inb(sio_data, DEVID); switch (val) { case W627_DEVID: sio_data->type = w83627hf; @@ -1168,16 +1160,9 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, goto exit; } - superio_select(W83627HF_LD_HWM); - force_addr &= WINB_ALIGNMENT; - if (force_addr) { - printk(KERN_WARNING DRVNAME ": Forcing address 0x%x\n", - force_addr); - superio_outb(WINB_BASE_REG, force_addr >> 8); - superio_outb(WINB_BASE_REG + 1, force_addr & 0xff); - } - val = (superio_inb(WINB_BASE_REG) << 8) | - superio_inb(WINB_BASE_REG + 1); + superio_select(sio_data, W83627HF_LD_HWM); + val = (superio_inb(sio_data, WINB_BASE_REG) << 8) | + superio_inb(sio_data, WINB_BASE_REG + 1); *addr = val & WINB_ALIGNMENT; if (*addr == 0) { printk(KERN_WARNING DRVNAME ": Base address not set, " @@ -1185,18 +1170,19 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, goto exit; } - val = superio_inb(WINB_ACT_REG); + val = superio_inb(sio_data, WINB_ACT_REG); if (!(val & 0x01)) { printk(KERN_WARNING DRVNAME ": Enabling HWM logical device\n"); - superio_outb(WINB_ACT_REG, val | 0x01); + superio_outb(sio_data, WINB_ACT_REG, val | 0x01); } err = 0; + sio_data->sioaddr = sioaddr; pr_info(DRVNAME ": Found %s chip at %#x\n", names[sio_data->type], *addr); exit: - superio_exit(); + superio_exit(sio_data); return err; } @@ -1511,20 +1497,21 @@ static int w83627hf_read_value(struct w83627hf_data *data, u16 reg) static int __devinit w83627thf_read_gpio5(struct platform_device *pdev) { + struct w83627hf_sio_data *sio_data = pdev->dev.platform_data; int res = 0xff, sel; - superio_enter(); - superio_select(W83627HF_LD_GPIO5); + superio_enter(sio_data); + superio_select(sio_data, W83627HF_LD_GPIO5); /* Make sure these GPIO pins are enabled */ - if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) { + if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) { dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n"); goto exit; } /* Make sure the pins are configured for input There must be at least five (VRM 9), and possibly 6 (VRM 10) */ - sel = superio_inb(W83627THF_GPIO5_IOSR) & 0x3f; + sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f; if ((sel & 0x1f) != 0x1f) { dev_dbg(&pdev->dev, "GPIO5 not configured for VID " "function\n"); @@ -1532,37 +1519,38 @@ static int __devinit w83627thf_read_gpio5(struct platform_device *pdev) } dev_info(&pdev->dev, "Reading VID from GPIO5\n"); - res = superio_inb(W83627THF_GPIO5_DR) & sel; + res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel; exit: - superio_exit(); + superio_exit(sio_data); return res; } static int __devinit w83687thf_read_vid(struct platform_device *pdev) { + struct w83627hf_sio_data *sio_data = pdev->dev.platform_data; int res = 0xff; - superio_enter(); - superio_select(W83627HF_LD_HWM); + superio_enter(sio_data); + superio_select(sio_data, W83627HF_LD_HWM); /* Make sure these GPIO pins are enabled */ - if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) { + if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) { dev_dbg(&pdev->dev, "VID disabled, no VID function\n"); goto exit; } /* Make sure the pins are configured for input */ - if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) { + if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) { dev_dbg(&pdev->dev, "VID configured as output, " "no VID function\n"); goto exit; } - res = superio_inb(W83687THF_VID_DATA) & 0x3f; + res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f; exit: - superio_exit(); + superio_exit(sio_data); return res; } diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index d27ed1bac002..7ab7967da0a0 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -1054,11 +1054,11 @@ static int w83781d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { - int val1 = 0, val2; + int val1, val2; struct w83781d_data *isa = w83781d_data_if_isa(); struct i2c_adapter *adapter = client->adapter; int address = client->addr; - const char *client_name = ""; + const char *client_name; enum vendor { winbond, asus } vendid; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) @@ -1070,98 +1070,73 @@ w83781d_detect(struct i2c_client *client, int kind, if (isa) mutex_lock(&isa->update_lock); - /* The w8378?d may be stuck in some other bank than bank 0. This may - make reading other information impossible. Specify a force=... or - force_*=... parameter, and the Winbond will be reset to the right - bank. */ - if (kind < 0) { - if (i2c_smbus_read_byte_data - (client, W83781D_REG_CONFIG) & 0x80) { - dev_dbg(&adapter->dev, "Detection of w83781d chip " - "failed at step 3\n"); - goto err_nodev; - } - val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK); - val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN); - /* Check for Winbond or Asus ID if in bank 0 */ - if ((!(val1 & 0x07)) && - (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3)) - || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) { - dev_dbg(&adapter->dev, "Detection of w83781d chip " - "failed at step 4\n"); + if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) { + dev_dbg(&adapter->dev, + "Detection of w83781d chip failed at step 3\n"); + goto err_nodev; + } + + val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK); + val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN); + /* Check for Winbond or Asus ID if in bank 0 */ + if (!(val1 & 0x07) && + ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) || + ( (val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) { + dev_dbg(&adapter->dev, + "Detection of w83781d chip failed at step 4\n"); + goto err_nodev; + } + /* If Winbond SMBus, check address at 0x48. + Asus doesn't support, except for as99127f rev.2 */ + if ((!(val1 & 0x80) && val2 == 0xa3) || + ( (val1 & 0x80) && val2 == 0x5c)) { + if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR) + != address) { + dev_dbg(&adapter->dev, + "Detection of w83781d chip failed at step 5\n"); goto err_nodev; } - /* If Winbond SMBus, check address at 0x48. - Asus doesn't support, except for as99127f rev.2 */ - if ((!(val1 & 0x80) && (val2 == 0xa3)) || - ((val1 & 0x80) && (val2 == 0x5c))) { - if (i2c_smbus_read_byte_data - (client, W83781D_REG_I2C_ADDR) != address) { - dev_dbg(&adapter->dev, "Detection of w83781d " - "chip failed at step 5\n"); - goto err_nodev; - } - } } - /* We have either had a force parameter, or we have already detected the - Winbond. Put it now into bank 0 and Vendor ID High Byte */ + /* Put it now into bank 0 and Vendor ID High Byte */ i2c_smbus_write_byte_data(client, W83781D_REG_BANK, (i2c_smbus_read_byte_data(client, W83781D_REG_BANK) & 0x78) | 0x80); - /* Determine the chip type. */ - if (kind <= 0) { - /* get vendor ID */ - val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN); - if (val2 == 0x5c) - vendid = winbond; - else if (val2 == 0x12) - vendid = asus; - else { - dev_dbg(&adapter->dev, "w83781d chip vendor is " - "neither Winbond nor Asus\n"); - goto err_nodev; - } - - val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID); - if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond) - kind = w83781d; - else if (val1 == 0x30 && vendid == winbond) - kind = w83782d; - else if (val1 == 0x40 && vendid == winbond && address == 0x2d) - kind = w83783s; - else if (val1 == 0x31) - kind = as99127f; - else { - if (kind == 0) - dev_warn(&adapter->dev, "Ignoring 'force' " - "parameter for unknown chip at " - "address 0x%02x\n", address); - goto err_nodev; - } - - if ((kind == w83781d || kind == w83782d) - && w83781d_alias_detect(client, val1)) { - dev_dbg(&adapter->dev, "Device at 0x%02x appears to " - "be the same as ISA device\n", address); - goto err_nodev; - } + /* Get the vendor ID */ + val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN); + if (val2 == 0x5c) + vendid = winbond; + else if (val2 == 0x12) + vendid = asus; + else { + dev_dbg(&adapter->dev, + "w83781d chip vendor is neither Winbond nor Asus\n"); + goto err_nodev; } - if (isa) - mutex_unlock(&isa->update_lock); - - if (kind == w83781d) { + /* Determine the chip type. */ + val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID); + if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond) client_name = "w83781d"; - } else if (kind == w83782d) { + else if (val1 == 0x30 && vendid == winbond) client_name = "w83782d"; - } else if (kind == w83783s) { + else if (val1 == 0x40 && vendid == winbond && address == 0x2d) client_name = "w83783s"; - } else if (kind == as99127f) { + else if (val1 == 0x31) client_name = "as99127f"; + else + goto err_nodev; + + if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) { + dev_dbg(&adapter->dev, "Device at 0x%02x appears to " + "be the same as ISA device\n", address); + goto err_nodev; } + if (isa) + mutex_unlock(&isa->update_lock); + strlcpy(info->type, client_name, I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 97851c5ba3a3..0410bf12c521 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -1270,56 +1270,32 @@ static int w83791d_detect(struct i2c_client *client, int kind, return -ENODEV; } - /* The w83791d may be stuck in some other bank than bank 0. This may - make reading other information impossible. Specify a force=... - parameter, and the Winbond will be reset to the right bank. */ - if (kind < 0) { - if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) { - return -ENODEV; - } - val1 = w83791d_read(client, W83791D_REG_BANK); - val2 = w83791d_read(client, W83791D_REG_CHIPMAN); - /* Check for Winbond ID if in bank 0 */ - if (!(val1 & 0x07)) { - /* yes it is Bank0 */ - if (((!(val1 & 0x80)) && (val2 != 0xa3)) || - ((val1 & 0x80) && (val2 != 0x5c))) { - return -ENODEV; - } - } - /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR - should match */ - if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) { + if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) + return -ENODEV; + + val1 = w83791d_read(client, W83791D_REG_BANK); + val2 = w83791d_read(client, W83791D_REG_CHIPMAN); + /* Check for Winbond ID if in bank 0 */ + if (!(val1 & 0x07)) { + if ((!(val1 & 0x80) && val2 != 0xa3) || + ( (val1 & 0x80) && val2 != 0x5c)) { return -ENODEV; } } + /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR + should match */ + if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) + return -ENODEV; - /* We either have a force parameter or we have reason to - believe it is a Winbond chip. Either way, we want bank 0 and - Vendor ID high byte */ + /* We want bank 0 and Vendor ID high byte */ val1 = w83791d_read(client, W83791D_REG_BANK) & 0x78; w83791d_write(client, W83791D_REG_BANK, val1 | 0x80); /* Verify it is a Winbond w83791d */ - if (kind <= 0) { - /* get vendor ID */ - val2 = w83791d_read(client, W83791D_REG_CHIPMAN); - if (val2 != 0x5c) { /* the vendor is NOT Winbond */ - return -ENODEV; - } - val1 = w83791d_read(client, W83791D_REG_WCHIPID); - if (val1 == 0x71) { - kind = w83791d; - } else { - if (kind == 0) - dev_warn(&adapter->dev, - "w83791d: Ignoring 'force' parameter " - "for unknown chip at adapter %d, " - "address 0x%02x\n", - i2c_adapter_id(adapter), address); - return -ENODEV; - } - } + val1 = w83791d_read(client, W83791D_REG_WCHIPID); + val2 = w83791d_read(client, W83791D_REG_CHIPMAN); + if (val1 != 0x71 || val2 != 0x5c) + return -ENODEV; strlcpy(info->type, "w83791d", I2C_NAME_SIZE); diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 2be16194ddf3..38978851333f 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -1273,58 +1273,33 @@ w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) return -ENODEV; } - /* The w83792d may be stuck in some other bank than bank 0. This may - make reading other information impossible. Specify a force=... or - force_*=... parameter, and the Winbond will be reset to the right - bank. */ - if (kind < 0) { - if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) { - return -ENODEV; - } - val1 = w83792d_read_value(client, W83792D_REG_BANK); - val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); - /* Check for Winbond ID if in bank 0 */ - if (!(val1 & 0x07)) { /* is Bank0 */ - if (((!(val1 & 0x80)) && (val2 != 0xa3)) || - ((val1 & 0x80) && (val2 != 0x5c))) { - return -ENODEV; - } - } - /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR - should match */ - if (w83792d_read_value(client, - W83792D_REG_I2C_ADDR) != address) { + if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) + return -ENODEV; + + val1 = w83792d_read_value(client, W83792D_REG_BANK); + val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); + /* Check for Winbond ID if in bank 0 */ + if (!(val1 & 0x07)) { /* is Bank0 */ + if ((!(val1 & 0x80) && val2 != 0xa3) || + ( (val1 & 0x80) && val2 != 0x5c)) return -ENODEV; - } } + /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR + should match */ + if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address) + return -ENODEV; - /* We have either had a force parameter, or we have already detected the - Winbond. Put it now into bank 0 and Vendor ID High Byte */ + /* Put it now into bank 0 and Vendor ID High Byte */ w83792d_write_value(client, W83792D_REG_BANK, (w83792d_read_value(client, W83792D_REG_BANK) & 0x78) | 0x80); /* Determine the chip type. */ - if (kind <= 0) { - /* get vendor ID */ - val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); - if (val2 != 0x5c) { /* the vendor is NOT Winbond */ - return -ENODEV; - } - val1 = w83792d_read_value(client, W83792D_REG_WCHIPID); - if (val1 == 0x7a) { - kind = w83792d; - } else { - if (kind == 0) - dev_warn(&adapter->dev, - "w83792d: Ignoring 'force' parameter for" - " unknown chip at adapter %d, address" - " 0x%02x\n", i2c_adapter_id(adapter), - address); - return -ENODEV; - } - } + val1 = w83792d_read_value(client, W83792D_REG_WCHIPID); + val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); + if (val1 != 0x7a || val2 != 0x5c) + return -ENODEV; strlcpy(info->type, "w83792d", I2C_NAME_SIZE); diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index 47dd398f7258..80a2191bf127 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -1164,7 +1164,7 @@ ERROR_SC_0: static int w83793_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { - u8 tmp, bank; + u8 tmp, bank, chip_id; struct i2c_adapter *adapter = client->adapter; unsigned short address = client->addr; @@ -1174,44 +1174,27 @@ static int w83793_detect(struct i2c_client *client, int kind, bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL); - if (kind < 0) { - tmp = bank & 0x80 ? 0x5c : 0xa3; - /* Check Winbond vendor ID */ - if (tmp != i2c_smbus_read_byte_data(client, - W83793_REG_VENDORID)) { - pr_debug("w83793: Detection failed at check " - "vendor id\n"); - return -ENODEV; - } - - /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR - should match */ - if ((bank & 0x07) == 0 - && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) != - (address << 1)) { - pr_debug("w83793: Detection failed at check " - "i2c addr\n"); - return -ENODEV; - } - + tmp = bank & 0x80 ? 0x5c : 0xa3; + /* Check Winbond vendor ID */ + if (tmp != i2c_smbus_read_byte_data(client, W83793_REG_VENDORID)) { + pr_debug("w83793: Detection failed at check vendor id\n"); + return -ENODEV; } - /* We have either had a force parameter, or we have already detected the - Winbond. Determine the chip type now */ - - if (kind <= 0) { - if (0x7b == i2c_smbus_read_byte_data(client, - W83793_REG_CHIPID)) { - kind = w83793; - } else { - if (kind == 0) - dev_warn(&adapter->dev, "w83793: Ignoring " - "'force' parameter for unknown chip " - "at address 0x%02x\n", address); - return -ENODEV; - } + /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR + should match */ + if ((bank & 0x07) == 0 + && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) != + (address << 1)) { + pr_debug("w83793: Detection failed at check i2c addr\n"); + return -ENODEV; } + /* Determine the chip type now */ + chip_id = i2c_smbus_read_byte_data(client, W83793_REG_CHIPID); + if (chip_id != 0x7b) + return -ENODEV; + strlcpy(info->type, "w83793", I2C_NAME_SIZE); return 0; diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index ea295b9fc4f4..9b6c4c10fba7 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -1,7 +1,7 @@ /* * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org> * * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made * by Winbond. It reports a single external temperature with a 1 deg @@ -146,60 +146,36 @@ static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1); */ /* Return 0 if detection is successful, -ENODEV otherwise */ -static int w83l785ts_detect(struct i2c_client *new_client, int kind, +static int w83l785ts_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { - struct i2c_adapter *adapter = new_client->adapter; + struct i2c_adapter *adapter = client->adapter; + u16 man_id; + u8 chip_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip (actually there is only - * one possible kind of chip for now, W83L785TS-S). A zero kind means - * that the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - if (kind < 0) { /* detection */ - if (((w83l785ts_read_value(new_client, - W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00) - || ((w83l785ts_read_value(new_client, - W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) { - dev_dbg(&adapter->dev, - "W83L785TS-S detection failed at 0x%02x.\n", - new_client->addr); - return -ENODEV; - } + /* detection */ + if ((w83l785ts_read_value(client, W83L785TS_REG_CONFIG, 0) & 0x80) + || (w83l785ts_read_value(client, W83L785TS_REG_TYPE, 0) & 0xFC)) { + dev_dbg(&adapter->dev, + "W83L785TS-S detection failed at 0x%02x\n", + client->addr); + return -ENODEV; } - if (kind <= 0) { /* identification */ - u16 man_id; - u8 chip_id; - - man_id = (w83l785ts_read_value(new_client, - W83L785TS_REG_MAN_ID1, 0) << 8) + - w83l785ts_read_value(new_client, - W83L785TS_REG_MAN_ID2, 0); - chip_id = w83l785ts_read_value(new_client, - W83L785TS_REG_CHIP_ID, 0); - - if (man_id == 0x5CA3) { /* Winbond */ - if (chip_id == 0x70) { /* W83L785TS-S */ - kind = w83l785ts; - } - } - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%04X, " - "chip_id=0x%02X).\n", man_id, chip_id); - return -ENODEV; - } + /* Identification */ + man_id = (w83l785ts_read_value(client, W83L785TS_REG_MAN_ID1, 0) << 8) + + w83l785ts_read_value(client, W83L785TS_REG_MAN_ID2, 0); + chip_id = w83l785ts_read_value(client, W83L785TS_REG_CHIP_ID, 0); + + if (man_id != 0x5CA3 /* Winbond */ + || chip_id != 0x70) { /* W83L785TS-S */ + dev_dbg(&adapter->dev, + "Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n", + man_id, chip_id); + return -ENODEV; } strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE); diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index badca769f350..27da7d2b15fb 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -590,53 +590,31 @@ w83l786ng_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; + u16 man_id; + u8 chip_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { return -ENODEV; } - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip (actually there is only - * one possible kind of chip for now, W83L786NG). A zero kind means - * that the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - if (kind < 0) { /* detection */ - if (((w83l786ng_read_value(client, - W83L786NG_REG_CONFIG) & 0x80) != 0x00)) { - dev_dbg(&adapter->dev, - "W83L786NG detection failed at 0x%02x.\n", - client->addr); - return -ENODEV; - } + /* Detection */ + if ((w83l786ng_read_value(client, W83L786NG_REG_CONFIG) & 0x80)) { + dev_dbg(&adapter->dev, "W83L786NG detection failed at 0x%02x\n", + client->addr); + return -ENODEV; } - if (kind <= 0) { /* identification */ - u16 man_id; - u8 chip_id; - - man_id = (w83l786ng_read_value(client, - W83L786NG_REG_MAN_ID1) << 8) + - w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2); - chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID); - - if (man_id == 0x5CA3) { /* Winbond */ - if (chip_id == 0x80) { /* W83L786NG */ - kind = w83l786ng; - } - } + /* Identification */ + man_id = (w83l786ng_read_value(client, W83L786NG_REG_MAN_ID1) << 8) + + w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2); + chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID); - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%04X, " - "chip_id=0x%02X).\n", man_id, chip_id); - return -ENODEV; - } + if (man_id != 0x5CA3 || /* Winbond */ + chip_id != 0x80) { /* W83L786NG */ + dev_dbg(&adapter->dev, + "Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n", + man_id, chip_id); + return -ENODEV; } strlcpy(info->type, "w83l786ng", I2C_NAME_SIZE); |