diff options
| -rw-r--r-- | drivers/ssb/driver_pcicore.c | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index d75b72ba2672..15a7ee3859dd 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -357,6 +357,15 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA); + /* + * Accessing PCI config without a proper delay after devices reset (not + * GPIO reset) was causing reboots on WRT300N v1.0. + * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it + * completely. Flushing all writes was also tested but with no luck. + */ + if (pc->dev->bus->chip_id == 0x4704) + usleep_range(1000, 2000); + /* Enable PCI bridge BAR0 prefetch and burst */ val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2); |