diff options
-rw-r--r-- | MAINTAINERS | 4 | ||||
-rw-r--r-- | arch/x86/include/asm/intel_punit_ipc.h | 101 | ||||
-rw-r--r-- | drivers/platform/x86/Kconfig | 6 | ||||
-rw-r--r-- | drivers/platform/x86/Makefile | 1 | ||||
-rw-r--r-- | drivers/platform/x86/intel_punit_ipc.c | 338 |
5 files changed, 449 insertions, 1 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index e9caa4b28828..2739161f3dc8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5680,12 +5680,14 @@ F: drivers/dma/mic_x100_dma.c F: drivers/dma/mic_x100_dma.h F Documentation/mic/ -INTEL PMC IPC DRIVER +INTEL PMC/P-Unit IPC DRIVER M: Zha Qipeng<qipeng.zha@intel.com> L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/intel_pmc_ipc.c +F: drivers/platform/x86/intel_punit_ipc.c F: arch/x86/include/asm/intel_pmc_ipc.h +F: arch/x86/include/asm/intel_punit_ipc.h IOC3 ETHERNET DRIVER M: Ralf Baechle <ralf@linux-mips.org> diff --git a/arch/x86/include/asm/intel_punit_ipc.h b/arch/x86/include/asm/intel_punit_ipc.h new file mode 100644 index 000000000000..201eb9dce595 --- /dev/null +++ b/arch/x86/include/asm/intel_punit_ipc.h @@ -0,0 +1,101 @@ +#ifndef _ASM_X86_INTEL_PUNIT_IPC_H_ +#define _ASM_X86_INTEL_PUNIT_IPC_H_ + +/* + * Three types of 8bit P-Unit IPC commands are supported, + * bit[7:6]: [00]: BIOS; [01]: GTD; [10]: ISPD. + */ +typedef enum { + BIOS_IPC = 0, + GTDRIVER_IPC, + ISPDRIVER_IPC, + RESERVED_IPC, +} IPC_TYPE; + +#define IPC_TYPE_OFFSET 6 +#define IPC_PUNIT_BIOS_CMD_BASE (BIOS_IPC << IPC_TYPE_OFFSET) +#define IPC_PUNIT_GTD_CMD_BASE (GTDDRIVER_IPC << IPC_TYPE_OFFSET) +#define IPC_PUNIT_ISPD_CMD_BASE (ISPDRIVER_IPC << IPC_TYPE_OFFSET) +#define IPC_PUNIT_CMD_TYPE_MASK (RESERVED_IPC << IPC_TYPE_OFFSET) + +/* BIOS => Pcode commands */ +#define IPC_PUNIT_BIOS_ZERO (IPC_PUNIT_BIOS_CMD_BASE | 0x00) +#define IPC_PUNIT_BIOS_VR_INTERFACE (IPC_PUNIT_BIOS_CMD_BASE | 0x01) +#define IPC_PUNIT_BIOS_READ_PCS (IPC_PUNIT_BIOS_CMD_BASE | 0x02) +#define IPC_PUNIT_BIOS_WRITE_PCS (IPC_PUNIT_BIOS_CMD_BASE | 0x03) +#define IPC_PUNIT_BIOS_READ_PCU_CONFIG (IPC_PUNIT_BIOS_CMD_BASE | 0x04) +#define IPC_PUNIT_BIOS_WRITE_PCU_CONFIG (IPC_PUNIT_BIOS_CMD_BASE | 0x05) +#define IPC_PUNIT_BIOS_READ_PL1_SETTING (IPC_PUNIT_BIOS_CMD_BASE | 0x06) +#define IPC_PUNIT_BIOS_WRITE_PL1_SETTING (IPC_PUNIT_BIOS_CMD_BASE | 0x07) +#define IPC_PUNIT_BIOS_TRIGGER_VDD_RAM (IPC_PUNIT_BIOS_CMD_BASE | 0x08) +#define IPC_PUNIT_BIOS_READ_TELE_INFO (IPC_PUNIT_BIOS_CMD_BASE | 0x09) +#define IPC_PUNIT_BIOS_READ_TELE_TRACE_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x0a) +#define IPC_PUNIT_BIOS_WRITE_TELE_TRACE_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x0b) +#define IPC_PUNIT_BIOS_READ_TELE_EVENT_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x0c) +#define IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x0d) +#define IPC_PUNIT_BIOS_READ_TELE_TRACE (IPC_PUNIT_BIOS_CMD_BASE | 0x0e) +#define IPC_PUNIT_BIOS_WRITE_TELE_TRACE (IPC_PUNIT_BIOS_CMD_BASE | 0x0f) +#define IPC_PUNIT_BIOS_READ_TELE_EVENT (IPC_PUNIT_BIOS_CMD_BASE | 0x10) +#define IPC_PUNIT_BIOS_WRITE_TELE_EVENT (IPC_PUNIT_BIOS_CMD_BASE | 0x11) +#define IPC_PUNIT_BIOS_READ_MODULE_TEMP (IPC_PUNIT_BIOS_CMD_BASE | 0x12) +#define IPC_PUNIT_BIOS_RESERVED (IPC_PUNIT_BIOS_CMD_BASE | 0x13) +#define IPC_PUNIT_BIOS_READ_VOLTAGE_OVER (IPC_PUNIT_BIOS_CMD_BASE | 0x14) +#define IPC_PUNIT_BIOS_WRITE_VOLTAGE_OVER (IPC_PUNIT_BIOS_CMD_BASE | 0x15) +#define IPC_PUNIT_BIOS_READ_RATIO_OVER (IPC_PUNIT_BIOS_CMD_BASE | 0x16) +#define IPC_PUNIT_BIOS_WRITE_RATIO_OVER (IPC_PUNIT_BIOS_CMD_BASE | 0x17) +#define IPC_PUNIT_BIOS_READ_VF_GL_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x18) +#define IPC_PUNIT_BIOS_WRITE_VF_GL_CTRL (IPC_PUNIT_BIOS_CMD_BASE | 0x19) +#define IPC_PUNIT_BIOS_READ_FM_SOC_TEMP_THRESH (IPC_PUNIT_BIOS_CMD_BASE | 0x1a) +#define IPC_PUNIT_BIOS_WRITE_FM_SOC_TEMP_THRESH (IPC_PUNIT_BIOS_CMD_BASE | 0x1b) + +/* GT Driver => Pcode commands */ +#define IPC_PUNIT_GTD_ZERO (IPC_PUNIT_GTD_CMD_BASE | 0x00) +#define IPC_PUNIT_GTD_CONFIG (IPC_PUNIT_GTD_CMD_BASE | 0x01) +#define IPC_PUNIT_GTD_READ_ICCP_LIC_CDYN_SCAL (IPC_PUNIT_GTD_CMD_BASE | 0x02) +#define IPC_PUNIT_GTD_WRITE_ICCP_LIC_CDYN_SCAL (IPC_PUNIT_GTD_CMD_BASE | 0x03) +#define IPC_PUNIT_GTD_GET_WM_VAL (IPC_PUNIT_GTD_CMD_BASE | 0x06) +#define IPC_PUNIT_GTD_WRITE_CONFIG_WISHREQ (IPC_PUNIT_GTD_CMD_BASE | 0x07) +#define IPC_PUNIT_GTD_READ_REQ_DUTY_CYCLE (IPC_PUNIT_GTD_CMD_BASE | 0x16) +#define IPC_PUNIT_GTD_DIS_VOL_FREQ_CHG_REQUEST (IPC_PUNIT_GTD_CMD_BASE | 0x17) +#define IPC_PUNIT_GTD_DYNA_DUTY_CYCLE_CTRL (IPC_PUNIT_GTD_CMD_BASE | 0x1a) +#define IPC_PUNIT_GTD_DYNA_DUTY_CYCLE_TUNING (IPC_PUNIT_GTD_CMD_BASE | 0x1c) + +/* ISP Driver => Pcode commands */ +#define IPC_PUNIT_ISPD_ZERO (IPC_PUNIT_ISPD_CMD_BASE | 0x00) +#define IPC_PUNIT_ISPD_CONFIG (IPC_PUNIT_ISPD_CMD_BASE | 0x01) +#define IPC_PUNIT_ISPD_GET_ISP_LTR_VAL (IPC_PUNIT_ISPD_CMD_BASE | 0x02) +#define IPC_PUNIT_ISPD_ACCESS_IU_FREQ_BOUNDS (IPC_PUNIT_ISPD_CMD_BASE | 0x03) +#define IPC_PUNIT_ISPD_READ_CDYN_LEVEL (IPC_PUNIT_ISPD_CMD_BASE | 0x04) +#define IPC_PUNIT_ISPD_WRITE_CDYN_LEVEL (IPC_PUNIT_ISPD_CMD_BASE | 0x05) + +/* Error codes */ +#define IPC_PUNIT_ERR_SUCCESS 0 +#define IPC_PUNIT_ERR_INVALID_CMD 1 +#define IPC_PUNIT_ERR_INVALID_PARAMETER 2 +#define IPC_PUNIT_ERR_CMD_TIMEOUT 3 +#define IPC_PUNIT_ERR_CMD_LOCKED 4 +#define IPC_PUNIT_ERR_INVALID_VR_ID 5 +#define IPC_PUNIT_ERR_VR_ERR 6 + +#if IS_ENABLED(CONFIG_INTEL_PUNIT_IPC) + +int intel_punit_ipc_simple_command(int cmd, int para1, int para2); +int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out); + +#else + +static inline int intel_punit_ipc_simple_command(int cmd, + int para1, int para2) +{ + return -ENODEV; +} + +static inline int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, + u32 *in, u32 *out) +{ + return -ENODEV; +} + +#endif /* CONFIG_INTEL_PUNIT_IPC */ + +#endif diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 1089eaa02b00..148ff880d9be 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -944,4 +944,10 @@ config SURFACE_PRO3_BUTTON depends on ACPI && INPUT ---help--- This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3 tablet. + +config INTEL_PUNIT_IPC + tristate "Intel P-Unit IPC Driver" + ---help--- + This driver provides support for Intel P-Unit Mailbox IPC mechanism, + which is used to bridge the communications between kernel and P-Unit. endif # X86_PLATFORM_DEVICES diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 3ca78a3eb6f8..5ee5425fcc1c 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -62,3 +62,4 @@ obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o +obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c new file mode 100644 index 000000000000..16685bc96946 --- /dev/null +++ b/drivers/platform/x86/intel_punit_ipc.c @@ -0,0 +1,338 @@ +/* + * Driver for the Intel P-Unit Mailbox IPC mechanism + * + * (C) Copyright 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The heart of the P-Unit is the Foxton microcontroller and its firmware, + * which provide mailbox interface for power management usage. + */ + +#include <linux/module.h> +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <asm/intel_punit_ipc.h> + +/* IPC Mailbox registers */ +#define OFFSET_DATA_LOW 0x0 +#define OFFSET_DATA_HIGH 0x4 +/* bit field of interface register */ +#define CMD_RUN BIT(31) +#define CMD_ERRCODE_MASK GENMASK(7, 0) +#define CMD_PARA1_SHIFT 8 +#define CMD_PARA2_SHIFT 16 + +#define CMD_TIMEOUT_SECONDS 1 + +enum { + BASE_DATA = 0, + BASE_IFACE, + BASE_MAX, +}; + +typedef struct { + struct device *dev; + struct mutex lock; + int irq; + struct completion cmd_complete; + /* base of interface and data registers */ + void __iomem *base[RESERVED_IPC][BASE_MAX]; + IPC_TYPE type; +} IPC_DEV; + +static IPC_DEV *punit_ipcdev; + +static inline u32 ipc_read_status(IPC_DEV *ipcdev, IPC_TYPE type) +{ + return readl(ipcdev->base[type][BASE_IFACE]); +} + +static inline void ipc_write_cmd(IPC_DEV *ipcdev, IPC_TYPE type, u32 cmd) +{ + writel(cmd, ipcdev->base[type][BASE_IFACE]); +} + +static inline u32 ipc_read_data_low(IPC_DEV *ipcdev, IPC_TYPE type) +{ + return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW); +} + +static inline u32 ipc_read_data_high(IPC_DEV *ipcdev, IPC_TYPE type) +{ + return readl(ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH); +} + +static inline void ipc_write_data_low(IPC_DEV *ipcdev, IPC_TYPE type, u32 data) +{ + writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_LOW); +} + +static inline void ipc_write_data_high(IPC_DEV *ipcdev, IPC_TYPE type, u32 data) +{ + writel(data, ipcdev->base[type][BASE_DATA] + OFFSET_DATA_HIGH); +} + +static const char *ipc_err_string(int error) +{ + if (error == IPC_PUNIT_ERR_SUCCESS) + return "no error"; + else if (error == IPC_PUNIT_ERR_INVALID_CMD) + return "invalid command"; + else if (error == IPC_PUNIT_ERR_INVALID_PARAMETER) + return "invalid parameter"; + else if (error == IPC_PUNIT_ERR_CMD_TIMEOUT) + return "command timeout"; + else if (error == IPC_PUNIT_ERR_CMD_LOCKED) + return "command locked"; + else if (error == IPC_PUNIT_ERR_INVALID_VR_ID) + return "invalid vr id"; + else if (error == IPC_PUNIT_ERR_VR_ERR) + return "vr error"; + else + return "unknown error"; +} + +static int intel_punit_ipc_check_status(IPC_DEV *ipcdev, IPC_TYPE type) +{ + int loops = CMD_TIMEOUT_SECONDS * USEC_PER_SEC; + int errcode; + int status; + + if (ipcdev->irq) { + if (!wait_for_completion_timeout(&ipcdev->cmd_complete, + CMD_TIMEOUT_SECONDS * HZ)) { + dev_err(ipcdev->dev, "IPC timed out\n"); + return -ETIMEDOUT; + } + } else { + while ((ipc_read_status(ipcdev, type) & CMD_RUN) && --loops) + udelay(1); + if (!loops) { + dev_err(ipcdev->dev, "IPC timed out\n"); + return -ETIMEDOUT; + } + } + + status = ipc_read_status(ipcdev, type); + errcode = status & CMD_ERRCODE_MASK; + if (errcode) { + dev_err(ipcdev->dev, "IPC failed: %s, IPC_STS=0x%x\n", + ipc_err_string(errcode), status); + return -EIO; + } + + return 0; +} + +/** + * intel_punit_ipc_simple_command() - Simple IPC command + * @cmd: IPC command code. + * @para1: First 8bit parameter, set 0 if not used. + * @para2: Second 8bit parameter, set 0 if not used. + * + * Send a IPC command to P-Unit when there is no data transaction + * + * Return: IPC error code or 0 on success. + */ +int intel_punit_ipc_simple_command(int cmd, int para1, int para2) +{ + IPC_DEV *ipcdev = punit_ipcdev; + IPC_TYPE type; + u32 val; + int ret; + + mutex_lock(&ipcdev->lock); + + reinit_completion(&ipcdev->cmd_complete); + type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET; + + val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK; + val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT; + ipc_write_cmd(ipcdev, type, val); + ret = intel_punit_ipc_check_status(ipcdev, type); + + mutex_unlock(&ipcdev->lock); + + return ret; +} +EXPORT_SYMBOL(intel_punit_ipc_simple_command); + +/** + * intel_punit_ipc_command() - IPC command with data and pointers + * @cmd: IPC command code. + * @para1: First 8bit parameter, set 0 if not used. + * @para2: Second 8bit parameter, set 0 if not used. + * @in: Input data, 32bit for BIOS cmd, two 32bit for GTD and ISPD. + * @out: Output data. + * + * Send a IPC command to P-Unit with data transaction + * + * Return: IPC error code or 0 on success. + */ +int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out) +{ + IPC_DEV *ipcdev = punit_ipcdev; + IPC_TYPE type; + u32 val; + int ret; + + mutex_lock(&ipcdev->lock); + + reinit_completion(&ipcdev->cmd_complete); + type = (cmd & IPC_PUNIT_CMD_TYPE_MASK) >> IPC_TYPE_OFFSET; + ipc_write_data_low(ipcdev, type, *in); + + if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC) + ipc_write_data_high(ipcdev, type, *++in); + + val = cmd & ~IPC_PUNIT_CMD_TYPE_MASK; + val |= CMD_RUN | para2 << CMD_PARA2_SHIFT | para1 << CMD_PARA1_SHIFT; + ipc_write_cmd(ipcdev, type, val); + + ret = intel_punit_ipc_check_status(ipcdev, type); + if (ret) + goto out; + *out = ipc_read_data_low(ipcdev, type); + + if (type == GTDRIVER_IPC || type == ISPDRIVER_IPC) + *++out = ipc_read_data_high(ipcdev, type); + +out: + mutex_unlock(&ipcdev->lock); + return ret; +} +EXPORT_SYMBOL_GPL(intel_punit_ipc_command); + +static irqreturn_t intel_punit_ioc(int irq, void *dev_id) +{ + IPC_DEV *ipcdev = dev_id; + + complete(&ipcdev->cmd_complete); + return IRQ_HANDLED; +} + +static int intel_punit_get_bars(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + punit_ipcdev->base[BIOS_IPC][BASE_DATA] = addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + punit_ipcdev->base[BIOS_IPC][BASE_IFACE] = addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 3); + addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 4); + addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 5); + addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr; + + return 0; +} + +static int intel_punit_ipc_probe(struct platform_device *pdev) +{ + int irq, ret; + + punit_ipcdev = devm_kzalloc(&pdev->dev, + sizeof(*punit_ipcdev), GFP_KERNEL); + if (!punit_ipcdev) + return -ENOMEM; + + platform_set_drvdata(pdev, punit_ipcdev); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + punit_ipcdev->irq = 0; + dev_warn(&pdev->dev, "Invalid IRQ, using polling mode\n"); + } else { + ret = devm_request_irq(&pdev->dev, irq, intel_punit_ioc, + IRQF_NO_SUSPEND, "intel_punit_ipc", + &punit_ipcdev); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq: %d\n", irq); + return ret; + } + punit_ipcdev->irq = irq; + } + + ret = intel_punit_get_bars(pdev); + if (ret) + goto out; + + punit_ipcdev->dev = &pdev->dev; + mutex_init(&punit_ipcdev->lock); + init_completion(&punit_ipcdev->cmd_complete); + +out: + return ret; +} + +static int intel_punit_ipc_remove(struct platform_device *pdev) +{ + return 0; +} + +static const struct acpi_device_id punit_ipc_acpi_ids[] = { + { "INT34D4", 0 }, + { } +}; + +static struct platform_driver intel_punit_ipc_driver = { + .probe = intel_punit_ipc_probe, + .remove = intel_punit_ipc_remove, + .driver = { + .name = "intel_punit_ipc", + .acpi_match_table = ACPI_PTR(punit_ipc_acpi_ids), + }, +}; + +static int __init intel_punit_ipc_init(void) +{ + return platform_driver_register(&intel_punit_ipc_driver); +} + +static void __exit intel_punit_ipc_exit(void) +{ + platform_driver_unregister(&intel_punit_ipc_driver); +} + +MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>"); +MODULE_DESCRIPTION("Intel P-Unit IPC driver"); +MODULE_LICENSE("GPL v2"); + +/* Some modules are dependent on this, so init earlier */ +fs_initcall(intel_punit_ipc_init); +module_exit(intel_punit_ipc_exit); |