diff options
58 files changed, 334 insertions, 296 deletions
diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt index 3e5b9793341f..8682ab6d4a50 100644 --- a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt +++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt @@ -8,8 +8,9 @@ This driver provides a simple power button event via an Interrupt. Required properties: - compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton" -Required properties for TPS65218: +Required properties: - interrupts: should be one of the following + - <2>: For controllers compatible with tps65217 - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218 Examples: @@ -17,6 +18,7 @@ Examples: &tps { tps65217-pwrbutton { compatible = "ti,tps65217-pwrbutton"; + interrupts = <2>; }; }; diff --git a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt index 98d131acee95..a11072c5a866 100644 --- a/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt +++ b/Documentation/devicetree/bindings/power/supply/tps65217_charger.txt @@ -2,11 +2,16 @@ TPS65217 Charger Required Properties: -compatible: "ti,tps65217-charger" +-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change. + Should be <0> for the USB charger and <1> for the AC adapter. +-interrupt-names: Should be "USB" and "AC" This node is a subnode of the tps65217 PMIC. Example: tps65217-charger { - compatible = "ti,tps65090-charger"; + compatible = "ti,tps65217-charger"; + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; }; diff --git a/MAINTAINERS b/MAINTAINERS index ea11bb03f550..9267b8fad791 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9849,7 +9849,7 @@ M: Mark Rutland <mark.rutland@arm.com> M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> L: linux-arm-kernel@lists.infradead.org S: Maintained -F: drivers/firmware/psci.c +F: drivers/firmware/psci*.c F: include/linux/psci.h F: include/uapi/linux/psci.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5fab553fd03a..186c4c214e0a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1502,8 +1502,7 @@ source kernel/Kconfig.preempt config HZ_FIXED int - default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ - ARCH_S5PV210 || ARCH_EXYNOS4 + default 200 if ARCH_EBSA110 default 128 if SOC_AT91RM9200 default 0 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cccdbcb557b6..7327250f0bb6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -501,6 +501,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ logicpd-torpedo-37xx-devkit.dtb \ + logicpd-som-lv-37xx-devkit.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-beagle-xm.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index dc561d505bbe..3e32dd18fd25 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -6,8 +6,6 @@ * published by the Free Software Foundation. */ -#include <dt-bindings/mfd/tps65217.h> - / { cpus { cpu@0 { @@ -319,13 +317,13 @@ ti,pmic-shutdown-controller; charger { - interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>; - interrupts-names = "AC", "USB"; + interrupts = <0>, <1>; + interrupt-names = "USB", "AC"; status = "okay"; }; pwrbutton { - interrupts = <TPS65217_IRQ_PB>; + interrupts = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 64c8aa9057a3..18d72a245e88 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -16,6 +16,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c0; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index ac55f93fc91e..2df9e6050c2f 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -16,6 +16,7 @@ interrupt-parent = <&wakeupgen>; #address-cells = <1>; #size-cells = <1>; + chosen { }; memory@0 { device_type = "memory"; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index d6e43e5184c1..ad68d1eb3bc3 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -62,11 +62,6 @@ linux,default-trigger = "mmc0"; }; }; - - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; - }; }; &mmc1 { @@ -79,3 +74,8 @@ &omap_dwc3_2 { extcon = <&extcon_usb2>; }; + +&extcon_usb2 { + id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 27d9149cedba..8350b4b34b08 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -23,11 +23,6 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - }; - status-leds { compatible = "gpio-leds"; cpu0-led { @@ -76,6 +71,11 @@ extcon = <&extcon_usb2>; }; +&extcon_usb2 { + id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; +}; + &mmc1 { status = "okay"; vmmc-supply = <&v3_3d>; @@ -87,3 +87,7 @@ &sn65hvs882 { load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; }; + +&pcie1 { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 555ae21f2b9a..814a720d5c3d 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -303,6 +303,13 @@ gpio-controller; #gpio-cells = <2>; }; + + extcon_usb2: tps659038_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + /* ID & VBUS GPIOs provided in board dts */ + }; }; }; @@ -369,7 +376,7 @@ }; &usb2 { - dr_mode = "otg"; + dr_mode = "peripheral"; }; &mmc2 { diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 1facc5f12cef..81b8cecb5820 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -12,6 +12,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 61dd2f6b02bc..6db652ae9bd5 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -12,6 +12,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index addb7530cfbe..1faf24acd521 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -18,6 +18,7 @@ compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi index ee6dac44edf1..e6df676886c0 100644 --- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi +++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi @@ -132,3 +132,19 @@ ti,palmas-long-press-seconds = <6>; }; }; + +&usb2_phy1 { + phy-supply = <&ldo4_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo4_reg>; +}; + +&dss { + vdda_video-supply = <&ldo5_reg>; +}; + +&mmc1 { + vmmc_aux-supply = <&ldo1_reg>; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 685916e3d8a1..85cd8be22f71 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -31,11 +31,11 @@ }; }; - avic: avic-interrupt-controller@60000000 { + avic: interrupt-controller@68000000 { compatible = "fsl,imx31-avic", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; - reg = <0x60000000 0x100000>; + reg = <0x68000000 0x100000>; }; soc { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index e476d01959ea..26d060484728 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -533,7 +533,6 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 53e6e63cbb02..89b834f3fa17 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1100,6 +1100,7 @@ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_EIM_SLOW>; fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 4fd6de29f07d..19cbd879c448 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -900,6 +900,7 @@ reg = <0x021b8000 0x4000>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 076a30f9bcae..10f333016197 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -977,6 +977,7 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_EIM_SLOW>; fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; }; ocotp: ocotp@021bc000 { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 4f793a025a72..f1d6de8b3c19 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -17,6 +17,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { serial0 = &uart1; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 87ca50b53002..4d448f145ed1 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -734,6 +734,8 @@ vmmc_aux-supply = <&vsim>; bus-width = <8>; non-removable; + no-sdio; + no-sd; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index ecf5eb584c75..a3ff4933dbc1 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,6 +17,7 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 8087456b5fbe..578c53f08309 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -15,6 +15,7 @@ interrupt-parent = <&wakeupgen>; #address-cells = <1>; #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 968c67a49dbd..7cd92babc41a 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -17,6 +17,7 @@ compatible = "ti,omap5"; interrupt-parent = <&wakeupgen>; + chosen { }; aliases { i2c0 = &i2c1; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 268bd470c865..407a4610f4a7 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/clock/qcom,gcc-msm8960.h> #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -303,6 +304,9 @@ firmware { scm { compatible = "qcom,scm-apq8064"; + + clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>; + clock-names = "core"; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 102838fcc588..15f4fd3f4695 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -81,7 +81,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0x2c001000 0 0x1000>, - <0 0x2c002000 0 0x1000>, + <0 0x2c002000 0 0x2000>, <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 45d08cc37b01..bd107c5a0226 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -131,7 +131,7 @@ #address-cells = <0>; interrupt-controller; reg = <0 0x2c001000 0 0x1000>, - <0 0x2c002000 0 0x1000>, + <0 0x2c002000 0 0x2000>, <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 7ea617e47fe4..958b4c42d320 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -153,7 +153,8 @@ switch0phy1: switch1phy0@1 { reg = <1>; interrupt-parent = <&switch0>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; switch0phy2: switch1phy0@2 { reg = <2>; interrupt-parent = <&switch0>; diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index df42c93a93d6..f5dce9b4e617 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -31,10 +31,10 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static void __clk_enable(struct clk *clk) +void davinci_clk_enable(struct clk *clk) { if (clk->parent) - __clk_enable(clk->parent); + davinci_clk_enable(clk->parent); if (clk->usecount++ == 0) { if (clk->flags & CLK_PSC) davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, @@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk) } } -static void __clk_disable(struct clk *clk) +void davinci_clk_disable(struct clk *clk) { if (WARN_ON(clk->usecount == 0)) return; @@ -56,7 +56,7 @@ static void __clk_disable(struct clk *clk) clk->clk_disable(clk); } if (clk->parent) - __clk_disable(clk->parent); + davinci_clk_disable(clk->parent); } int davinci_clk_reset(struct clk *clk, bool reset) @@ -103,7 +103,7 @@ int clk_enable(struct clk *clk) return -EINVAL; spin_lock_irqsave(&clockfw_lock, flags); - __clk_enable(clk); + davinci_clk_enable(clk); spin_unlock_irqrestore(&clockfw_lock, flags); return 0; @@ -118,7 +118,7 @@ void clk_disable(struct clk *clk) return; spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); + davinci_clk_disable(clk); spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index e2a5437a1aee..fa2b83752e03 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -132,6 +132,8 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); int davinci_set_refclk_rate(unsigned long rate); int davinci_simple_set_rate(struct clk *clk, unsigned long rate); int davinci_clk_reset(struct clk *clk, bool reset); +void davinci_clk_enable(struct clk *clk); +void davinci_clk_disable(struct clk *clk); extern struct platform_device davinci_wdt_device; extern void davinci_watchdog_reset(struct platform_device *); diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index e770c97ea45c..1d873d15b545 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -319,6 +319,16 @@ static struct clk emac_clk = { .gpsc = 1, }; +/* + * In order to avoid adding the emac_clk to the clock lookup table twice (and + * screwing up the linked list in the process) create a separate clock for + * mdio inheriting the rate from emac_clk. + */ +static struct clk mdio_clk = { + .name = "mdio", + .parent = &emac_clk, +}; + static struct clk mcasp_clk = { .name = "mcasp", .parent = &async3_clk, @@ -367,6 +377,16 @@ static struct clk aemif_clk = { .flags = ALWAYS_ENABLED, }; +/* + * In order to avoid adding the aemif_clk to the clock lookup table twice (and + * screwing up the linked list in the process) create a separate clock for + * nand inheriting the rate from aemif_clk. + */ +static struct clk aemif_nand_clk = { + .name = "nand", + .parent = &aemif_clk, +}; + static struct clk usb11_clk = { .name = "usb11", .parent = &pll0_sysclk4, @@ -529,7 +549,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "arm", &arm_clk), CLK(NULL, "rmii", &rmii_clk), CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), + CLK("davinci_mdio.0", "fck", &mdio_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk), CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk), @@ -537,7 +557,15 @@ static struct clk_lookup da850_clks[] = { CLK("da830-mmc.0", NULL, &mmcsd0_clk), CLK("da830-mmc.1", NULL, &mmcsd1_clk), CLK("ti-aemif", NULL, &aemif_clk), - CLK(NULL, "aemif", &aemif_clk), + /* + * The only user of this clock is davinci_nand and it get's it through + * con_id. The nand node itself is created from within the aemif + * driver to guarantee that it's probed after the aemif timing + * parameters are configured. of_dev_auxdata is not accessible from + * the aemif driver and can't be passed to of_platform_populate(). For + * that reason we're leaving the dev_id here as NULL. + */ + CLK(NULL, "aemif", &aemif_nand_clk), CLK("ohci-da8xx", "usb11", &usb11_clk), CLK("musb-da8xx", "usb20", &usb20_clk), CLK("spi_davinci.0", NULL, &spi0_clk), diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index c6feecf7ae24..9a6af0bd5dc3 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -22,6 +22,8 @@ #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 +static struct clk *usb20_clk; + static struct platform_device da8xx_usb_phy = { .name = "da8xx-usb-phy", .id = -1, @@ -158,26 +160,13 @@ int __init da8xx_register_usb_refclkin(int rate) static void usb20_phy_clk_enable(struct clk *clk) { - struct clk *usb20_clk; - int err; u32 val; u32 timeout = 500000; /* 500 msec */ val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); - if (IS_ERR(usb20_clk)) { - pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk)); - return; - } - /* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */ - err = clk_prepare_enable(usb20_clk); - if (err) { - pr_err("failed to enable usb20 clk: %d\n", err); - clk_put(usb20_clk); - return; - } + davinci_clk_enable(usb20_clk); /* * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1 @@ -197,8 +186,7 @@ static void usb20_phy_clk_enable(struct clk *clk) pr_err("Timeout waiting for USB 2.0 PHY clock good\n"); done: - clk_disable_unprepare(usb20_clk); - clk_put(usb20_clk); + davinci_clk_disable(usb20_clk); } static void usb20_phy_clk_disable(struct clk *clk) @@ -285,11 +273,19 @@ static struct clk_lookup usb20_phy_clk_lookup = int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin) { struct clk *parent; - int ret = 0; + int ret; + + usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); + ret = PTR_ERR_OR_ZERO(usb20_clk); + if (ret) + return ret; parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux"); - if (IS_ERR(parent)) - return PTR_ERR(parent); + ret = PTR_ERR_OR_ZERO(parent); + if (ret) { + clk_put(usb20_clk); + return ret; + } usb20_phy_clk.parent = parent; ret = clk_register(&usb20_phy_clk); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 98ffe1e62ad5..a5d68411a037 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -385,36 +385,6 @@ fail: return pen_release != -1 ? ret : 0; } -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ - -static void __init exynos_smp_init_cpus(void) -{ - void __iomem *scu_base = scu_base_addr(); - unsigned int i, ncores; - - if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) - ncores = scu_base ? scu_get_core_count(scu_base) : 1; - else - /* - * CPU Nodes are passed thru DT and set_cpu_possible - * is set by "arm_dt_init_cpu_maps". - */ - return; - - /* sanity check */ - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { int i; @@ -479,7 +449,6 @@ static void exynos_cpu_die(unsigned int cpu) #endif /* CONFIG_HOTPLUG_CPU */ const struct smp_operations exynos_smp_ops __initconst = { - .smp_init_cpus = exynos_smp_init_cpus, .smp_prepare_cpus = exynos_smp_prepare_cpus, .smp_secondary_init = exynos_secondary_init, .smp_boot_secondary = exynos_boot_secondary, diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c index de5ab8d88549..3a8406e45b65 100644 --- a/arch/arm/mach-imx/mach-imx1.c +++ b/arch/arm/mach-imx/mach-imx1.c @@ -37,7 +37,6 @@ static const char * const imx1_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") - .map_io = debug_ll_io_init, .init_early = imx1_init_early, .init_irq = imx1_init_irq, .dt_compat = imx1_dt_board_compat, diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 469894082fea..093458b62c8d 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \ # Common support obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ + common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ omap_device.o omap-headsmp.o sram.o drm.o hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 36d9943205ca..dc9e34e670a2 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -304,7 +304,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") .init_late = am43xx_init_late, .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, - .init_time = omap4_local_timer_init, + .init_time = omap3_gptimer_timer_init, .dt_compat = am43_boards_compat, .restart = omap44xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c deleted file mode 100644 index 7a577145b68b..000000000000 --- a/arch/arm/mach-omap2/gpio.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * OMAP2+ specific gpio initialization - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Author: - * Charulatha V <charu@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/gpio.h> -#include <linux/err.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/of.h> -#include <linux/platform_data/gpio-omap.h> - -#include "soc.h" -#include "omap_hwmod.h" -#include "omap_device.h" -#include "omap-pm.h" - -#include "powerdomain.h" - -static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) -{ - struct platform_device *pdev; - struct omap_gpio_platform_data *pdata; - struct omap_gpio_dev_attr *dev_attr; - char *name = "omap_gpio"; - int id; - struct powerdomain *pwrdm; - - /* - * extract the device id from name field available in the - * hwmod database and use the same for constructing ids for - * gpio devices. - * CAUTION: Make sure the name in the hwmod database does - * not change. If changed, make corresponding change here - * or make use of static variable mechanism to handle this. - */ - sscanf(oh->name, "gpio%d", &id); - - pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL); - if (!pdata) { - pr_err("gpio%d: Memory allocation failed\n", id); - return -ENOMEM; - } - - dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr; - pdata->bank_width = dev_attr->bank_width; - pdata->dbck_flag = dev_attr->dbck_flag; - pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; - pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); - if (!pdata->regs) { - pr_err("gpio%d: Memory allocation failed\n", id); - kfree(pdata); - return -ENOMEM; - } - - switch (oh->class->rev) { - case 0: - if (id == 1) - /* non-wakeup GPIO pins for OMAP2 Bank1 */ - pdata->non_wakeup_gpios = 0xe203ffc0; - else if (id == 2) - /* non-wakeup GPIO pins for OMAP2 Bank2 */ - pdata->non_wakeup_gpios = 0x08700040; - /* fall through */ - - case 1: - pdata->regs->revision = OMAP24XX_GPIO_REVISION; - pdata->regs->direction = OMAP24XX_GPIO_OE; - pdata->regs->datain = OMAP24XX_GPIO_DATAIN; - pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT; - pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT; - pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT; - pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; - pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; - pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; - pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2; - pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; - pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; - pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; - pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; - pdata->regs->ctrl = OMAP24XX_GPIO_CTRL; - pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN; - pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0; - pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1; - pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT; - pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT; - break; - case 2: - pdata->regs->revision = OMAP4_GPIO_REVISION; - pdata->regs->direction = OMAP4_GPIO_OE; - pdata->regs->datain = OMAP4_GPIO_DATAIN; - pdata->regs->dataout = OMAP4_GPIO_DATAOUT; - pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT; - pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT; - pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0; - pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1; - pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; - pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; - pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; - pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1; - pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; - pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; - pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; - pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; - pdata->regs->ctrl = OMAP4_GPIO_CTRL; - pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0; - pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0; - pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1; - pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT; - pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT; - break; - default: - WARN(1, "Invalid gpio bank_type\n"); - kfree(pdata->regs); - kfree(pdata); - return -EINVAL; - } - - pwrdm = omap_hwmod_get_pwrdm(oh); - pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); - - pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata)); - kfree(pdata); - - if (IS_ERR(pdev)) { - WARN(1, "Can't build omap_device for %s:%s.\n", - name, oh->name); - return PTR_ERR(pdev); - } - - return 0; -} - -/* - * gpio_init needs to be done before - * machine_init functions access gpio APIs. - * Hence gpio_init is a omap_postcore_initcall. - */ -static int __init omap2_gpio_init(void) -{ - /* If dtb is there, the devices will be created dynamically */ - if (of_have_populated_dt()) - return -ENODEV; - - return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL); -} -omap_postcore_initcall(omap2_gpio_init); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 759e1d45ba25..e8b988714a09 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -741,14 +741,14 @@ static int _init_main_clk(struct omap_hwmod *oh) int ret = 0; char name[MOD_CLK_MAX_NAME_LEN]; struct clk *clk; + static const char modck[] = "_mod_ck"; - /* +7 magic comes from '_mod_ck' suffix */ - if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN) + if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck)) pr_warn("%s: warning: cropping name for %s\n", __func__, oh->name); - strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7); - strcat(name, "_mod_ck"); + strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck)); + strlcat(name, modck, MOD_CLK_MAX_NAME_LEN); clk = clk_get(NULL, name); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index cdfbb44ceb0c..f22e9cb39f4a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -121,10 +121,6 @@ extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_dispc_irqs[]; extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio1_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio2_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio3_irqs[]; -extern struct omap_hwmod_irq_info omap2_gpio4_irqs[]; extern struct omap_hwmod_irq_info omap2_dma_system_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[]; diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 5b2f5138d938..2b138b65129a 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -295,10 +295,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) GFP_KERNEL); if (!prcm_irq_chips || !prcm_irq_setup->saved_mask || - !prcm_irq_setup->priority_mask) { - pr_err("PRCM: kzalloc failed\n"); + !prcm_irq_setup->priority_mask) goto err; - } memset(mask, 0, sizeof(mask)); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 56128da23c3a..07dd692c4737 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -510,18 +510,19 @@ void __init omap3_secure_sync32k_timer_init(void) } #endif /* CONFIG_ARCH_OMAP3 */ -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) void __init omap3_gptimer_timer_init(void) { __omap_sync32k_timer_init(2, "timer_sys_ck", NULL, 1, "timer_sys_ck", "ti,timer-alwon", true); - - clocksource_probe(); + if (of_have_populated_dt()) + clocksource_probe(); } #endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) + defined(CONFIG_SOC_DRA7XX) static void __init omap4_sync32k_timer_init(void) { __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon", diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index f6c3f151d0d4..b59f4f4f256f 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -345,10 +345,40 @@ static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = { [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, }; +static const struct dma_slave_map s3c2410_dma_slave_map[] = { + { "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX }, + { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX }, + { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX }, + { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX }, + /* + * The DMA request source[1] (DMACH_UARTx_SRC2) are + * not used in the UART driver. + */ + { "s3c2410-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2410-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2410-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2410-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2410-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2410-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, + { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, + { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } +}; + static struct s3c24xx_dma_platdata s3c2410_dma_platdata = { .num_phy_channels = 4, .channels = s3c2410_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2410_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map), }; struct platform_device s3c2410_device_dma = { @@ -388,10 +418,36 @@ static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = { [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 }, }; +static const struct dma_slave_map s3c2412_dma_slave_map[] = { + { "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX }, + { "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX }, + { "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX }, + { "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX }, + { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c2412-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT }, + { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, + { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } +}; + static struct s3c24xx_dma_platdata s3c2412_dma_platdata = { .num_phy_channels = 4, .channels = s3c2412_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2412_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map), }; struct platform_device s3c2412_device_dma = { @@ -534,10 +590,30 @@ static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = { [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 }, }; +static const struct dma_slave_map s3c2443_dma_slave_map[] = { + { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX }, + { "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX }, + { "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX }, + { "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX }, + { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 }, + { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 }, + { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, +}; + static struct s3c24xx_dma_platdata s3c2443_dma_platdata = { .num_phy_channels = 6, .channels = s3c2443_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2443_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map), }; struct platform_device s3c2443_device_dma = { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index fc033c0d2a0f..eada0b58ba1c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -356,5 +356,21 @@ status = "disabled"; }; }; + + vpu: vpu@d0100000 { + compatible = "amlogic,meson-gx-vpu"; + reg = <0x0 0xd0100000 0x0 0x100000>, + <0x0 0xc883c000 0x0 0x1000>, + <0x0 0xc8838000 0x0 0x1000>; + reg-names = "vpu", "hhi", "dmc"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + + /* CVBS VDAC output port */ + cvbs_vdac_port: port@0 { + reg = <0>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 969682092e0f..4cbd626a9e88 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -142,6 +142,16 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; &uart_AO { @@ -229,3 +239,9 @@ clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 203be28978d5..4a96e0f6f926 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -125,6 +125,16 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -234,3 +244,9 @@ clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 51edd5b5c460..596240c38a9c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -506,3 +506,7 @@ <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; + +&vpu { + compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts index e99101ae9664..cea4a3eded9b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts @@ -117,6 +117,16 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; &uart_AO { @@ -203,3 +213,9 @@ clocks = <&clkc CLKID_FCLK_DIV4>; clock-names = "clkin0"; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 9f89b99c4806..69216246275d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -43,7 +43,7 @@ #include "meson-gx.dtsi" #include <dt-bindings/clock/gxbb-clkc.h> -#include <dt-bindings/gpio/meson-gxbb-gpio.h> +#include <dt-bindings/gpio/meson-gxl-gpio.h> / { compatible = "amlogic,meson-gxl"; @@ -299,3 +299,7 @@ <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; + +&vpu { + compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index f859d75db8bd..5a337d339df1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -90,6 +90,16 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -167,3 +177,9 @@ max-speed = <1000>; }; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index c1974bbbddea..eb2f0c3e5e53 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -112,3 +112,7 @@ }; }; }; + +&vpu { + compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index a852e28a40e1..a83ed2c6bbf7 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -81,7 +81,7 @@ #address-cells = <0>; interrupt-controller; reg = <0x0 0x2c001000 0 0x1000>, - <0x0 0x2c002000 0 0x1000>, + <0x0 0x2c002000 0 0x2000>, <0x0 0x2c004000 0 0x2000>, <0x0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 9d1d7ad9b075..29ed6b61c737 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -64,6 +64,16 @@ reg = <0x0 0x86000000 0x0 0x200000>; no-map; }; + + memory@85800000 { + reg = <0x0 0x85800000 0x0 0x800000>; + no-map; + }; + + memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; + no-map; + }; }; cpus { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index 6ffb0517421a..dbea2c3d8f0c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -169,7 +169,7 @@ power-source = <3300>; }; - sdhi0_pins_uhs: sd0 { + sdhi0_pins_uhs: sd0_uhs { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; power-source = <1800>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 869dded0f09f..33b744d54739 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -331,6 +331,7 @@ CONFIG_DRM_VC4=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_HISI_KIRIN=m +CONFIG_DRM_MESON=m CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_BACKLIGHT_GENERIC=m diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index 70e13230d8db..9ad0b1934be9 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -721,11 +721,17 @@ static int scpi_sensor_get_value(u16 sensor, u64 *val) ret = scpi_send_message(CMD_SENSOR_VALUE, &id, sizeof(id), &buf, sizeof(buf)); - if (!ret) + if (ret) + return ret; + + if (scpi_info->is_legacy) + /* only 32-bits supported, hi_val can be junk */ + *val = le32_to_cpu(buf.lo_val); + else *val = (u64)le32_to_cpu(buf.hi_val) << 32 | le32_to_cpu(buf.lo_val); - return ret; + return 0; } static int scpi_device_get_power_state(u16 dev_id) diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci_checker.c index 44bdb78f837b..29d58feaf675 100644 --- a/drivers/firmware/psci_checker.c +++ b/drivers/firmware/psci_checker.c @@ -270,8 +270,7 @@ static int suspend_test_thread(void *arg) struct cpuidle_device *dev; struct cpuidle_driver *drv; /* No need for an actual callback, we just want to wake up the CPU. */ - struct timer_list wakeup_timer = - TIMER_INITIALIZER(dummy_callback, 0, 0); + struct timer_list wakeup_timer; /* Wait for the main thread to give the start signal. */ wait_for_completion(&suspend_threads_started); @@ -287,6 +286,7 @@ static int suspend_test_thread(void *arg) pr_info("CPU %d entering suspend cycles, states 1 through %d\n", cpu, drv->state_count - 1); + setup_timer_on_stack(&wakeup_timer, dummy_callback, 0); for (i = 0; i < NUM_SUSPEND_CYCLE; ++i) { int index; /* diff --git a/include/dt-bindings/mfd/tps65217.h b/include/dt-bindings/mfd/tps65217.h deleted file mode 100644 index cafb9e60cf12..000000000000 --- a/include/dt-bindings/mfd/tps65217.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This header provides macros for TI TPS65217 DT bindings. - * - * Copyright (C) 2016 Texas Instruments - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __DT_BINDINGS_TPS65217_H__ -#define __DT_BINDINGS_TPS65217_H__ - -#define TPS65217_IRQ_USB 0 -#define TPS65217_IRQ_AC 1 -#define TPS65217_IRQ_PB 2 - -#endif |