summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/serial/8250.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/ingenic,uart.txt3
-rw-r--r--Documentation/devicetree/bindings/serial/milbeaut-uart.txt21
-rw-r--r--Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt35
-rw-r--r--Documentation/devicetree/bindings/serial/omap_serial.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/pl011.txt51
-rw-r--r--Documentation/devicetree/bindings/serial/pl011.yaml126
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt10
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt76
-rw-r--r--Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml140
-rw-r--r--drivers/tty/Kconfig24
-rw-r--r--drivers/tty/hvc/hvc_xen.c2
-rw-r--r--drivers/tty/ipwireless/hardware.c2
-rw-r--r--drivers/tty/n_gsm.c246
-rw-r--r--drivers/tty/n_hdlc.c2
-rw-r--r--drivers/tty/n_tty.c6
-rw-r--r--drivers/tty/nozomi.c10
-rw-r--r--drivers/tty/serdev/serdev-ttyport.c4
-rw-r--r--drivers/tty/serial/8250/8250_ingenic.c13
-rw-r--r--drivers/tty/serial/8250/8250_of.c5
-rw-r--r--drivers/tty/serial/8250/8250_omap.c75
-rw-r--r--drivers/tty/serial/8250/8250_pci.c170
-rw-r--r--drivers/tty/serial/8250/8250_pxa.c4
-rw-r--r--drivers/tty/serial/Kconfig22
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/clps711x.c23
-rw-r--r--drivers/tty/serial/fsl_lpuart.c208
-rw-r--r--drivers/tty/serial/lpc32xx_hs.c4
-rw-r--r--drivers/tty/serial/max310x.c21
-rw-r--r--drivers/tty/serial/meson_uart.c13
-rw-r--r--drivers/tty/serial/mps2-uart.c138
-rw-r--r--drivers/tty/serial/msm_serial.c2
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c279
-rw-r--r--drivers/tty/serial/samsung.c42
-rw-r--r--drivers/tty/serial/sc16is7xx.c4
-rw-r--r--drivers/tty/serial/serial_core.c2
-rw-r--r--drivers/tty/serial/sh-sci.c71
-rw-r--r--drivers/tty/serial/sprd_serial.c2
-rw-r--r--drivers/tty/serial/tegra-tcu.c298
-rw-r--r--drivers/tty/serial/xilinx_uartps.c40
-rw-r--r--drivers/tty/synclink.c54
-rw-r--r--drivers/tty/sysrq.c8
-rw-r--r--drivers/tty/tty_buffer.c2
-rw-r--r--drivers/tty/tty_io.c3
-rw-r--r--drivers/tty/tty_ldisc.c47
-rw-r--r--drivers/tty/vt/vc_screen.c48
-rw-r--r--drivers/tty/vt/vt.c77
-rw-r--r--include/linux/console_struct.h2
-rw-r--r--include/uapi/linux/serial_core.h3
50 files changed, 1672 insertions, 772 deletions
diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt
index da50321da34d..3cba12f855b7 100644
--- a/Documentation/devicetree/bindings/serial/8250.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
@@ -21,6 +21,7 @@ Required properties:
- "altr,16550-FIFO128"
- "fsl,16550-FIFO64"
- "fsl,ns16550"
+ - "intel,xscale-uart"
- "ti,da830-uart"
- "aspeed,ast2400-vuart"
- "aspeed,ast2500-vuart"
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
index c3c6406d5cfe..24ed8769f4af 100644
--- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt
@@ -6,7 +6,8 @@ Required properties:
- "ingenic,jz4760-uart",
- "ingenic,jz4770-uart",
- "ingenic,jz4775-uart",
- - "ingenic,jz4780-uart".
+ - "ingenic,jz4780-uart",
+ - "ingenic,x1000-uart".
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
- clocks : phandles to the module & baud clocks.
diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 000000000000..3d2fb1a7ba94
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
@@ -0,0 +1,21 @@
+Socionext Milbeaut UART controller
+
+Required properties:
+- compatible: should be "socionext,milbeaut-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- interrupt-names: should be "rx", "tx".
+- clocks: phandle to the input clock.
+
+Optional properties:
+- auto-flow-control: flow control enable.
+
+Example:
+ usio1: usio_uart@1e700010 {
+ compatible = "socionext,milbeaut-usio-uart";
+ reg = <0x1e700010 0x10>;
+ interrupts = <0 141 0x4>, <0 149 0x4>;
+ interrupt-names = "rx", "tx";
+ clocks = <&clk 2>;
+ auto-flow-control;
+ };
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
new file mode 100644
index 000000000000..085a8591accd
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
@@ -0,0 +1,35 @@
+NVIDIA Tegra Combined UART (TCU)
+
+The TCU is a system for sharing a hardware UART instance among multiple
+systems within the Tegra SoC. It is implemented through a mailbox-
+based protocol where each "virtual UART" has a pair of mailboxes, one
+for transmitting and one for receiving, that is used to communicate
+with the hardware implementing the TCU.
+
+Required properties:
+- name : Should be tcu
+- compatible
+ Array of strings
+ One of:
+ - "nvidia,tegra194-tcu"
+- mbox-names:
+ "rx" - Mailbox for receiving data from hardware UART
+ "tx" - Mailbox for transmitting data to hardware UART
+- mboxes: Mailboxes corresponding to the mbox-names.
+
+This node is a mailbox consumer. See the following files for details of
+the mailbox subsystem, and the specifiers implemented by the relevant
+provider(s):
+
+- .../mailbox/mailbox.txt
+- .../mailbox/nvidia,tegra186-hsp.txt
+
+Example bindings:
+-----------------
+
+tcu: tcu {
+ compatible = "nvidia,tegra194-tcu";
+ mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>,
+ <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>;
+ mbox-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index c35d5ece1156..0a9b5444f4e6 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -22,6 +22,8 @@ Optional properties:
- dma-names : "rx" for receive channel, "tx" for transmit channel.
- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
- rs485-rts-active-high: drive RTS high when sending (default is low).
+- clocks: phandle to the functional clock as per
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
Example:
diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
deleted file mode 100644
index 77863aefe9ef..000000000000
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* ARM AMBA Primecell PL011 serial UART
-
-Required properties:
-- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart"
-- reg: exactly one register range with length 0x1000
-- interrupts: exactly one interrupt specifier
-
-Optional properties:
-- pinctrl:
- When present, must have one state named "default",
- and may contain a second name named "sleep". The former
- state sets up pins for ordinary operation whereas
- the latter state will put the associated pins to sleep
- when the UART is unused
-- clocks:
- When present, the first clock listed must correspond to
- the clock named UARTCLK on the IP block, i.e. the clock
- to the external serial line, whereas the second clock
- must correspond to the PCLK clocking the internal logic
- of the block. Just listing one clock (the first one) is
- deprecated.
-- clock-names:
- When present, the first clock listed must be named
- "uartclk" and the second clock listed must be named
- "apb_pclk"
-- dmas:
- When present, may have one or two dma channels.
- The first one must be named "rx", the second one
- must be named "tx".
-- auto-poll:
- Enables polling when using RX DMA.
-- poll-rate-ms:
- Rate at which poll occurs when auto-poll is set,
- default 100ms.
-- poll-timeout-ms:
- Poll timeout when auto-poll is set, default
- 3000ms.
-
-See also bindings/arm/primecell.txt
-
-Example:
-
-uart@80120000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x80120000 0x1000>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
- dma-names = "rx", "tx";
- clocks = <&foo_clk>, <&bar_clk>;
- clock-names = "uartclk", "apb_pclk";
-};
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
new file mode 100644
index 000000000000..1a64d59152aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/pl011.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM AMBA Primecell PL011 serial UART
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+allOf:
+ - $ref: /schemas/serial.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,pl011
+ - zte,zx296702-uart
+ required:
+ - compatible
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: arm,pl011
+ - const: arm,primecell
+ - items:
+ - const: zte,zx296702-uart
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ description:
+ When present, must have one state named "default",
+ and may contain a second name named "sleep". The former
+ state sets up pins for ordinary operation whereas
+ the latter state will put the associated pins to sleep
+ when the UART is unused
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+ clocks:
+ description:
+ When present, the first clock listed must correspond to
+ the clock named UARTCLK on the IP block, i.e. the clock
+ to the external serial line, whereas the second clock
+ must correspond to the PCLK clocking the internal logic
+ of the block. Just listing one clock (the first one) is
+ deprecated.
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: uartclk
+ - const: apb_pclk
+
+ dmas:
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ minItems: 1
+ items:
+ - const: rx
+ - const: tx
+
+ auto-poll:
+ description:
+ Enables polling when using RX DMA.
+ type: boolean
+
+ poll-rate-ms:
+ description:
+ Rate at which poll occurs when auto-poll is set.
+ default 100ms.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 100
+
+ poll-timeout-ms:
+ description:
+ Poll timeout when auto-poll is set, default
+ 3000ms.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 3000
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+dependencies:
+ poll-rate-ms: [ auto-poll ]
+ poll-timeout-ms: [ auto-poll ]
+
+additionalProperties: false
+
+examples:
+ - |
+ serial@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 4>;
+ dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
+ dma-names = "rx", "tx";
+ clocks = <&foo_clk>, <&bar_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt b/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt
deleted file mode 100644
index 8b9e0d4dc2e4..000000000000
--- a/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Renesas RZ/N1 UART
-
-This controller is based on the Synopsys DesignWare ABP UART and inherits all
-properties defined in snps-dw-apb-uart.txt except for the compatible property.
-
-Required properties:
-- compatible : The device specific string followed by the generic RZ/N1 string.
- Therefore it must be one of:
- "renesas,r9a06g032-uart", "renesas,rzn1-uart"
- "renesas,r9a06g033-uart", "renesas,rzn1-uart"
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 20232ad05d89..dd63151dc8b6 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -29,7 +29,9 @@ Required properties:
- "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART.
- "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART.
- "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
+ - "renesas,hscif-r8a7778" for R8A7778 (R-Car M1) HSCIF compatible UART.
- "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
+ - "renesas,hscif-r8a7779" for R8A7779 (R-Car H1) HSCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
- "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
- "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
deleted file mode 100644
index 12bbe9f22560..000000000000
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* Synopsys DesignWare ABP UART
-
-Required properties:
-- compatible : "snps,dw-apb-uart"
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-
-Clock handling:
-The clock rate of the input clock needs to be supplied by one of
-- clock-frequency : the input clock frequency for the UART.
-- clocks : phandle to the input clock
-
-The supplying peripheral clock can also be handled, needing a second property
-- clock-names: tuple listing input clock names.
- Required elements: "baudclk", "apb_pclk"
-
-Optional properties:
-- snps,uart-16550-compatible : reflects the value of UART_16550_COMPATIBLE
- configuration parameter. Define this if your UART does not implement the busy
- functionality.
-- resets : phandle to the parent reset controller.
-- reg-shift : quantity to shift the register offsets by. If this property is
- not present then the register offsets are not shifted.
-- reg-io-width : the size (in bytes) of the IO accesses that should be
- performed on the device. If this property is not present then single byte
- accesses are used.
-- dcd-override : Override the DCD modem status signal. This signal will always
- be reported as active instead of being obtained from the modem status
- register. Define this if your serial port does not use this pin.
-- dsr-override : Override the DTS modem status signal. This signal will always
- be reported as active instead of being obtained from the modem status
- register. Define this if your serial port does not use this pin.
-- cts-override : Override the CTS modem status signal. This signal will always
- be reported as active instead of being obtained from the modem status
- register. Define this if your serial port does not use this pin.
-- ri-override : Override the RI modem status signal. This signal will always be
- reported as inactive instead of being obtained from the modem status register.
- Define this if your serial port does not use this pin.
-
-Example:
-
- uart@80230000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x80230000 0x100>;
- clock-frequency = <3686400>;
- interrupts = <10>;
- reg-shift = <2>;
- reg-io-width = <4>;
- dcd-override;
- dsr-override;
- cts-override;
- ri-override;
- };
-
-Example with one clock:
-
- uart@80230000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x80230000 0x100>;
- clocks = <&baudclk>;
- interrupts = <10>;
- reg-shift = <2>;
- reg-io-width = <4>;
- };
-
-Example with two clocks:
-
- uart@80230000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x80230000 0x100>;
- clocks = <&baudclk>, <&apb_pclk>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <10>;
- reg-shift = <2>;
- reg-io-width = <4>;
- };
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
new file mode 100644
index 000000000000..b42002542690
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare ABP UART
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+allOf:
+ - $ref: /schemas/serial.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a06g032-uart
+ - renesas,r9a06g033-uart
+ - const: renesas,rzn1-uart
+ - items:
+ - enum:
+ - rockchip,px30-uart
+ - rockchip,rk3036-uart
+ - rockchip,rk3066-uart
+ - rockchip,rk3188-uart
+ - rockchip,rk3288-uart
+ - rockchip,rk3328-uart
+ - rockchip,rk3368-uart
+ - rockchip,rk3399-uart
+ - rockchip,rv1108-uart
+ - const: snps,dw-apb-uart
+ - items:
+ - enum:
+ - brcm,bcm11351-dw-apb-uart
+ - brcm,bcm21664-dw-apb-uart
+ - const: snps,dw-apb-uart
+ - const: snps,dw-apb-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency: true
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: baudclk
+ - const: apb_pclk
+
+ snps,uart-16550-compatible:
+ description: reflects the value of UART_16550_COMPATIBLE configuration
+ parameter. Define this if your UART does not implement the busy functionality.
+ type: boolean
+
+ resets:
+ maxItems: 1
+
+ reg-shift: true
+
+ reg-io-width: true
+
+ dcd-override:
+ description: Override the DCD modem status signal. This signal will
+ always be reported as active instead of being obtained from the modem
+ status register. Define this if your serial port does not use this
+ pin.
+ type: boolean
+
+ dsr-override:
+ description: Override the DTS modem status signal. This signal will
+ always be reported as active instead of being obtained from the modem
+ status register. Define this if your serial port does not use this
+ pin.
+ type: boolean
+
+ cts-override:
+ description: Override the CTS modem status signal. This signal will
+ always be reported as active instead of being obtained from the modem
+ status register. Define this if your serial port does not use this
+ pin.
+ type: boolean
+
+ ri-override:
+ description: Override the RI modem status signal. This signal will always
+ be reported as inactive instead of being obtained from the modem status
+ register. Define this if your serial port does not use this pin.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ serial@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clock-frequency = <3686400>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ dcd-override;
+ dsr-override;
+ cts-override;
+ ri-override;
+ };
+
+ - |
+ // Example with one clock:
+ serial@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clocks = <&baudclk>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ - |
+ // Example with two clocks:
+ serial@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clocks = <&baudclk>, <&apb_pclk>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+...
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 0840d27381ea..e0a04bfc873e 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -441,4 +441,28 @@ config VCC
depends on SUN_LDOMS
help
Support for Sun logical domain consoles.
+
+config LDISC_AUTOLOAD
+ bool "Automatically load TTY Line Disciplines"
+ default y
+ help
+ Historically the kernel has always automatically loaded any
+ line discipline that is in a kernel module when a user asks
+ for it to be loaded with the TIOCSETD ioctl, or through other
+ means. This is not always the best thing to do on systems
+ where you know you will not be using some of the more
+ "ancient" line disciplines, so prevent the kernel from doing
+ this unless the request is coming from a process with the
+ CAP_SYS_MODULE permissions.
+
+ Say 'Y' here if you trust your userspace users to do the right
+ thing, or if you have only provided the line disciplines that
+ you know you will be using, or if you wish to continue to use
+ the traditional method of on-demand loading of these modules
+ by any user.
+
+ This functionality can be changed at runtime with the
+ dev.tty.ldisc_autoload sysctl, this configuration option will
+ only set the default value of this functionality.
+
endif # TTY
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index dc43fa96c3de..5ef08905fe05 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -492,7 +492,7 @@ static void xencons_backend_changed(struct xenbus_device *dev,
case XenbusStateClosed:
if (dev->state == XenbusStateClosed)
break;
- /* Missed the backend's CLOSING state -- fallthrough */
+ /* fall through - Missed the backend's CLOSING state. */
case XenbusStateClosing:
xenbus_frontend_closed(dev);
break;
diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c
index b0baa4ce10f9..6bbf35682d53 100644
--- a/drivers/tty/ipwireless/hardware.c
+++ b/drivers/tty/ipwireless/hardware.c
@@ -1516,6 +1516,8 @@ static void ipw_send_setup_packet(struct ipw_hardware *hw)
sizeof(struct ipw_setup_get_version_query_packet),
ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP,
TL_SETUP_SIGNO_GET_VERSION_QRY);
+ if (!ver_packet)
+ return;
ver_packet->header.length = sizeof(struct tl_setup_get_version_qry);
/*
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 6f7da9a9d76f..c4e16b31f9ab 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -143,8 +143,8 @@ struct gsm_dlci {
struct sk_buff *skb; /* Frame being sent */
struct sk_buff_head skb_list; /* Queued frames */
/* Data handling callback */
- void (*data)(struct gsm_dlci *dlci, u8 *data, int len);
- void (*prev_data)(struct gsm_dlci *dlci, u8 *data, int len);
+ void (*data)(struct gsm_dlci *dlci, const u8 *data, int len);
+ void (*prev_data)(struct gsm_dlci *dlci, const u8 *data, int len);
struct net_device *net; /* network interface, if created */
};
@@ -988,7 +988,7 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
* Encode up and queue a UI/UIH frame containing our response.
*/
-static void gsm_control_reply(struct gsm_mux *gsm, int cmd, u8 *data,
+static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data,
int dlen)
{
struct gsm_msg *msg;
@@ -1073,14 +1073,14 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
* and if need be stuff a break message down the tty.
*/
-static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen)
+static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
{
unsigned int addr = 0;
unsigned int modem = 0;
unsigned int brk = 0;
struct gsm_dlci *dlci;
int len = clen;
- u8 *dp = data;
+ const u8 *dp = data;
struct tty_struct *tty;
while (gsm_read_ea(&addr, *dp++) == 0) {
@@ -1134,13 +1134,13 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen)
* this into the uplink tty if present
*/
-static void gsm_control_rls(struct gsm_mux *gsm, u8 *data, int clen)
+static void gsm_control_rls(struct gsm_mux *gsm, const u8 *data, int clen)
{
struct tty_port *port;
unsigned int addr = 0;
u8 bits;
int len = clen;
- u8 *dp = data;
+ const u8 *dp = data;
while (gsm_read_ea(&addr, *dp++) == 0) {
len--;
@@ -1189,7 +1189,7 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci);
*/
static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
- u8 *data, int clen)
+ const u8 *data, int clen)
{
u8 buf[1];
unsigned long flags;
@@ -1261,7 +1261,7 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
*/
static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
- u8 *data, int clen)
+ const u8 *data, int clen)
{
struct gsm_control *ctrl;
unsigned long flags;
@@ -1553,7 +1553,7 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci)
* open we shovel the bits down it, if not we drop them.
*/
-static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen)
+static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)
{
/* krefs .. */
struct tty_port *port = &dlci->port;
@@ -1565,14 +1565,11 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen)
pr_debug("%d bytes for tty\n", len);
switch (dlci->adaption) {
/* Unsupported types */
- /* Packetised interruptible data */
- case 4:
+ case 4: /* Packetised interruptible data */
break;
- /* Packetised uininterruptible voice/data */
- case 3:
+ case 3: /* Packetised uininterruptible voice/data */
break;
- /* Asynchronous serial with line state in each frame */
- case 2:
+ case 2: /* Asynchronous serial with line state in each frame */
while (gsm_read_ea(&modem, *data++) == 0) {
len--;
if (len == 0)
@@ -1583,8 +1580,8 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen)
gsm_process_modem(tty, dlci, modem, clen);
tty_kref_put(tty);
}
- /* Line state will go via DLCI 0 controls only */
- case 1:
+ /* Fall through */
+ case 1: /* Line state will go via DLCI 0 controls only */
default:
tty_insert_flip_string(port, data, len);
tty_flip_buffer_push(port);
@@ -1603,7 +1600,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen)
* and we divide up the work accordingly.
*/
-static void gsm_dlci_command(struct gsm_dlci *dlci, u8 *data, int len)
+static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len)
{
/* See what command is involved */
unsigned int command = 0;
@@ -1979,7 +1976,7 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
gsm->address = 0;
gsm->state = GSM_ADDRESS;
gsm->fcs = INIT_FCS;
- /* Drop through */
+ /* Fall through */
case GSM_ADDRESS: /* Address continuation */
gsm->fcs = gsm_fcs_add(gsm->fcs, c);
if (gsm_read_ea(&gsm->address, c))
@@ -2214,6 +2211,111 @@ static struct gsm_mux *gsm_alloc_mux(void)
return gsm;
}
+static void gsm_copy_config_values(struct gsm_mux *gsm,
+ struct gsm_config *c)
+{
+ memset(c, 0, sizeof(*c));
+ c->adaption = gsm->adaption;
+ c->encapsulation = gsm->encoding;
+ c->initiator = gsm->initiator;
+ c->t1 = gsm->t1;
+ c->t2 = gsm->t2;
+ c->t3 = 0; /* Not supported */
+ c->n2 = gsm->n2;
+ if (gsm->ftype == UIH)
+ c->i = 1;
+ else
+ c->i = 2;
+ pr_debug("Ftype %d i %d\n", gsm->ftype, c->i);
+ c->mru = gsm->mru;
+ c->mtu = gsm->mtu;
+ c->k = 0;
+}
+
+static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
+{
+ int need_close = 0;
+ int need_restart = 0;
+
+ /* Stuff we don't support yet - UI or I frame transport, windowing */
+ if ((c->adaption != 1 && c->adaption != 2) || c->k)
+ return -EOPNOTSUPP;
+ /* Check the MRU/MTU range looks sane */
+ if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
+ return -EINVAL;
+ if (c->n2 < 3)
+ return -EINVAL;
+ if (c->encapsulation > 1) /* Basic, advanced, no I */
+ return -EINVAL;
+ if (c->initiator > 1)
+ return -EINVAL;
+ if (c->i == 0 || c->i > 2) /* UIH and UI only */
+ return -EINVAL;
+ /*
+ * See what is needed for reconfiguration
+ */
+
+ /* Timing fields */
+ if (c->t1 != 0 && c->t1 != gsm->t1)
+ need_restart = 1;
+ if (c->t2 != 0 && c->t2 != gsm->t2)
+ need_restart = 1;
+ if (c->encapsulation != gsm->encoding)
+ need_restart = 1;
+ if (c->adaption != gsm->adaption)
+ need_restart = 1;
+ /* Requires care */
+ if (c->initiator != gsm->initiator)
+ need_close = 1;
+ if (c->mru != gsm->mru)
+ need_restart = 1;
+ if (c->mtu != gsm->mtu)
+ need_restart = 1;
+
+ /*
+ * Close down what is needed, restart and initiate the new
+ * configuration
+ */
+
+ if (need_close || need_restart) {
+ int ret;
+
+ ret = gsm_disconnect(gsm);
+
+ if (ret)
+ return ret;
+ }
+ if (need_restart)
+ gsm_cleanup_mux(gsm);
+
+ gsm->initiator = c->initiator;
+ gsm->mru = c->mru;
+ gsm->mtu = c->mtu;
+ gsm->encoding = c->encapsulation;
+ gsm->adaption = c->adaption;
+ gsm->n2 = c->n2;
+
+ if (c->i == 1)
+ gsm->ftype = UIH;
+ else if (c->i == 2)
+ gsm->ftype = UI;
+
+ if (c->t1)
+ gsm->t1 = c->t1;
+ if (c->t2)
+ gsm->t2 = c->t2;
+
+ /*
+ * FIXME: We need to separate activation/deactivation from adding
+ * and removing from the mux array
+ */
+ if (need_restart)
+ gsm_activate_mux(gsm);
+ if (gsm->initiator && need_close)
+ gsm_dlci_begin_open(gsm->dlci[0]);
+ return 0;
+}
+
/**
* gsmld_output - write to link
* @gsm: our mux
@@ -2495,89 +2597,6 @@ static __poll_t gsmld_poll(struct tty_struct *tty, struct file *file,
return mask;
}
-static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
- struct gsm_config *c)
-{
- int need_close = 0;
- int need_restart = 0;
-
- /* Stuff we don't support yet - UI or I frame transport, windowing */
- if ((c->adaption != 1 && c->adaption != 2) || c->k)
- return -EOPNOTSUPP;
- /* Check the MRU/MTU range looks sane */
- if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
- return -EINVAL;
- if (c->n2 < 3)
- return -EINVAL;
- if (c->encapsulation > 1) /* Basic, advanced, no I */
- return -EINVAL;
- if (c->initiator > 1)
- return -EINVAL;
- if (c->i == 0 || c->i > 2) /* UIH and UI only */
- return -EINVAL;
- /*
- * See what is needed for reconfiguration
- */
-
- /* Timing fields */
- if (c->t1 != 0 && c->t1 != gsm->t1)
- need_restart = 1;
- if (c->t2 != 0 && c->t2 != gsm->t2)
- need_restart = 1;
- if (c->encapsulation != gsm->encoding)
- need_restart = 1;
- if (c->adaption != gsm->adaption)
- need_restart = 1;
- /* Requires care */
- if (c->initiator != gsm->initiator)
- need_close = 1;
- if (c->mru != gsm->mru)
- need_restart = 1;
- if (c->mtu != gsm->mtu)
- need_restart = 1;
-
- /*
- * Close down what is needed, restart and initiate the new
- * configuration
- */
-
- if (need_close || need_restart) {
- int ret;
-
- ret = gsm_disconnect(gsm);
-
- if (ret)
- return ret;
- }
- if (need_restart)
- gsm_cleanup_mux(gsm);
-
- gsm->initiator = c->initiator;
- gsm->mru = c->mru;
- gsm->mtu = c->mtu;
- gsm->encoding = c->encapsulation;
- gsm->adaption = c->adaption;
- gsm->n2 = c->n2;
-
- if (c->i == 1)
- gsm->ftype = UIH;
- else if (c->i == 2)
- gsm->ftype = UI;
-
- if (c->t1)
- gsm->t1 = c->t1;
- if (c->t2)
- gsm->t2 = c->t2;
-
- /* FIXME: We need to separate activation/deactivation from adding
- and removing from the mux array */
- if (need_restart)
- gsm_activate_mux(gsm);
- if (gsm->initiator && need_close)
- gsm_dlci_begin_open(gsm->dlci[0]);
- return 0;
-}
-
static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
@@ -2586,29 +2605,14 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
switch (cmd) {
case GSMIOC_GETCONF:
- memset(&c, 0, sizeof(c));
- c.adaption = gsm->adaption;
- c.encapsulation = gsm->encoding;
- c.initiator = gsm->initiator;
- c.t1 = gsm->t1;
- c.t2 = gsm->t2;
- c.t3 = 0; /* Not supported */
- c.n2 = gsm->n2;
- if (gsm->ftype == UIH)
- c.i = 1;
- else
- c.i = 2;
- pr_debug("Ftype %d i %d\n", gsm->ftype, c.i);
- c.mru = gsm->mru;
- c.mtu = gsm->mtu;
- c.k = 0;
+ gsm_copy_config_values(gsm, &c);
if (copy_to_user((void *)arg, &c, sizeof(c)))
return -EFAULT;
return 0;
case GSMIOC_SETCONF:
if (copy_from_user(&c, (void *)arg, sizeof(c)))
return -EFAULT;
- return gsmld_config(tty, gsm, &c);
+ return gsm_config(gsm, &c);
default:
return n_tty_ioctl_helper(tty, file, cmd, arg);
}
@@ -2695,7 +2699,7 @@ static void gsm_mux_net_tx_timeout(struct net_device *net)
}
static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
- unsigned char *in_buf, int size)
+ const unsigned char *in_buf, int size)
{
struct net_device *net = dlci->net;
struct sk_buff *skb;
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 8bdf42bc8fc8..e55c79eb6430 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -777,7 +777,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
case TCOFLUSH:
flush_tx_queue(tty);
}
- /* fall through to default */
+ /* fall through - to default */
default:
error = n_tty_ioctl_helper(tty, file, cmd, arg);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 5dc9686697cf..9cdb0fa3c4bf 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -50,8 +50,10 @@
#include <linux/ratelimit.h>
#include <linux/vmalloc.h>
-
-/* number of characters left in xmit buffer before select has we have room */
+/*
+ * Until this number of characters is queued in the xmit buffer, select will
+ * return "we have room for writes".
+ */
#define WAKEUP_CHARS 256
/*
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index fed820e9ab9d..3214e22e79f3 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1317,7 +1317,6 @@ static void remove_sysfs_files(struct nozomi *dc)
static int nozomi_card_init(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- resource_size_t start;
int ret;
struct nozomi *dc = NULL;
int ndev_idx;
@@ -1357,17 +1356,10 @@ static int nozomi_card_init(struct pci_dev *pdev,
goto err_disable_device;
}
- start = pci_resource_start(dc->pdev, 0);
- if (start == 0) {
- dev_err(&pdev->dev, "No I/O address for card detected\n");
- ret = -ENODEV;
- goto err_rel_regs;
- }
-
/* Find out what card type it is */
nozomi_get_card_type(dc);
- dc->base_addr = ioremap_nocache(start, dc->card_type);
+ dc->base_addr = pci_iomap(dc->pdev, 0, dc->card_type);
if (!dc->base_addr) {
dev_err(&pdev->dev, "Unable to map card MMIO\n");
ret = -ENODEV;
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index fa1672993b4c..d1cdd2ab8b4c 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -233,7 +233,7 @@ static int ttyport_get_tiocm(struct serdev_controller *ctrl)
if (!tty->ops->tiocmget)
return -ENOTSUPP;
- return tty->driver->ops->tiocmget(tty);
+ return tty->ops->tiocmget(tty);
}
static int ttyport_set_tiocm(struct serdev_controller *ctrl, unsigned int set, unsigned int clear)
@@ -244,7 +244,7 @@ static int ttyport_set_tiocm(struct serdev_controller *ctrl, unsigned int set, u
if (!tty->ops->tiocmset)
return -ENOTSUPP;
- return tty->driver->ops->tiocmset(tty, set, clear);
+ return tty->ops->tiocmset(tty, set, clear);
}
static const struct serdev_controller_ops ctrl_ops = {
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 15a8c8dfa92b..424c07c5f629 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -129,22 +129,21 @@ static int __init ingenic_early_console_setup(struct earlycon_device *dev,
return 0;
}
-EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup);
OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
ingenic_early_console_setup);
-EARLYCON_DECLARE(jz4770_uart, ingenic_early_console_setup);
OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart",
ingenic_early_console_setup);
-EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup);
OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
ingenic_early_console_setup);
-EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup);
OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart",
ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart",
+ ingenic_early_console_setup);
+
static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
{
int ier;
@@ -328,12 +327,18 @@ static const struct ingenic_uart_config jz4780_uart_config = {
.fifosize = 64,
};
+static const struct ingenic_uart_config x1000_uart_config = {
+ .tx_loadsz = 32,
+ .fifosize = 64,
+};
+
static const struct of_device_id of_match[] = {
{ .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
{ .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
{ .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config },
{ .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
{ .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
+ { .compatible = "ingenic,x1000-uart", .data = &x1000_uart_config },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_match);
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index a1a85805d010..0277479c87e9 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -130,6 +130,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->flags |= UPF_IOREMAP;
}
+ /* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */
+ if (of_device_is_compatible(np, "mrvl,mmp-uart"))
+ port->regshift = 2;
+
/* Check for registers offset within the devices address range */
if (of_property_read_u32(np, "reg-shift", &prop) == 0)
port->regshift = prop;
@@ -327,6 +331,7 @@ static const struct of_device_id of_platform_serial_table[] = {
{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
{ .compatible = "ralink,rt2880-uart", .data = (void *)PORT_RT2880, },
+ { .compatible = "intel,xscale-uart", .data = (void *)PORT_XSCALE, },
{ .compatible = "altr,16550-FIFO32",
.data = (void *)PORT_ALTR_16550_F32, },
{ .compatible = "altr,16550-FIFO64",
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index ad7ba7d0f28d..0a8316632d75 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -12,6 +12,7 @@
#define SUPPORT_SYSRQ
#endif
+#include <linux/clk.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -1134,10 +1135,12 @@ static int omap8250_probe(struct platform_device *pdev)
{
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ struct device_node *np = pdev->dev.of_node;
struct omap8250_priv *priv;
struct uart_8250_port up;
int ret;
void __iomem *membase;
+ const struct of_device_id *id;
if (!regs || !irq) {
dev_err(&pdev->dev, "missing registers or irq\n");
@@ -1194,27 +1197,31 @@ static int omap8250_probe(struct platform_device *pdev)
up.port.unthrottle = omap_8250_unthrottle;
up.port.rs485_config = omap_8250_rs485_config;
- if (pdev->dev.of_node) {
- const struct of_device_id *id;
-
- ret = of_alias_get_id(pdev->dev.of_node, "serial");
-
- of_property_read_u32(pdev->dev.of_node, "clock-frequency",
- &up.port.uartclk);
- priv->wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1);
-
- id = of_match_device(of_match_ptr(omap8250_dt_ids), &pdev->dev);
- if (id && id->data)
- priv->habit |= *(u8 *)id->data;
- } else {
- ret = pdev->id;
- }
+ ret = of_alias_get_id(np, "serial");
if (ret < 0) {
- dev_err(&pdev->dev, "failed to get alias/pdev id\n");
+ dev_err(&pdev->dev, "failed to get alias\n");
return ret;
}
up.port.line = ret;
+ if (of_property_read_u32(np, "clock-frequency", &up.port.uartclk)) {
+ struct clk *clk;
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ if (PTR_ERR(clk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ } else {
+ up.port.uartclk = clk_get_rate(clk);
+ }
+ }
+
+ priv->wakeirq = irq_of_parse_and_map(np, 1);
+
+ id = of_match_device(of_match_ptr(omap8250_dt_ids), &pdev->dev);
+ if (id && id->data)
+ priv->habit |= *(u8 *)id->data;
+
if (!up.port.uartclk) {
up.port.uartclk = DEFAULT_CLK_SPEED;
dev_warn(&pdev->dev,
@@ -1242,25 +1249,23 @@ static int omap8250_probe(struct platform_device *pdev)
omap_serial_fill_features_erratas(&up, priv);
up.port.handle_irq = omap8250_no_handle_irq;
#ifdef CONFIG_SERIAL_8250_DMA
- if (pdev->dev.of_node) {
- /*
- * Oh DMA support. If there are no DMA properties in the DT then
- * we will fall back to a generic DMA channel which does not
- * really work here. To ensure that we do not get a generic DMA
- * channel assigned, we have the the_no_dma_filter_fn() here.
- * To avoid "failed to request DMA" messages we check for DMA
- * properties in DT.
- */
- ret = of_property_count_strings(pdev->dev.of_node, "dma-names");
- if (ret == 2) {
- up.dma = &priv->omap8250_dma;
- priv->omap8250_dma.fn = the_no_dma_filter_fn;
- priv->omap8250_dma.tx_dma = omap_8250_tx_dma;
- priv->omap8250_dma.rx_dma = omap_8250_rx_dma;
- priv->omap8250_dma.rx_size = RX_TRIGGER;
- priv->omap8250_dma.rxconf.src_maxburst = RX_TRIGGER;
- priv->omap8250_dma.txconf.dst_maxburst = TX_TRIGGER;
- }
+ /*
+ * Oh DMA support. If there are no DMA properties in the DT then
+ * we will fall back to a generic DMA channel which does not
+ * really work here. To ensure that we do not get a generic DMA
+ * channel assigned, we have the the_no_dma_filter_fn() here.
+ * To avoid "failed to request DMA" messages we check for DMA
+ * properties in DT.
+ */
+ ret = of_property_count_strings(np, "dma-names");
+ if (ret == 2) {
+ up.dma = &priv->omap8250_dma;
+ priv->omap8250_dma.fn = the_no_dma_filter_fn;
+ priv->omap8250_dma.tx_dma = omap_8250_tx_dma;
+ priv->omap8250_dma.rx_dma = omap_8250_rx_dma;
+ priv->omap8250_dma.rx_size = RX_TRIGGER;
+ priv->omap8250_dma.rxconf.src_maxburst = RX_TRIGGER;
+ priv->omap8250_dma.txconf.dst_maxburst = TX_TRIGGER;
}
#endif
ret = serial8250_register_8250_port(&up);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 48bd694a5fa1..df41397de478 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2027,6 +2027,111 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
*/
@@ -3375,6 +3480,9 @@ static const struct pci_device_id blacklist[] = {
/* Exar devices */
{ PCI_VDEVICE(EXAR, PCI_ANY_ID), },
{ PCI_VDEVICE(COMMTECH, PCI_ANY_ID), },
+
+ /* End of the black list */
+ { }
};
static int serial_pci_is_class_communication(struct pci_dev *dev)
@@ -3392,25 +3500,6 @@ static int serial_pci_is_class_communication(struct pci_dev *dev)
return 0;
}
-static int serial_pci_is_blacklisted(struct pci_dev *dev)
-{
- const struct pci_device_id *bldev;
-
- /*
- * Do not access blacklisted devices that are known not to
- * feature serial ports or are handled by other modules.
- */
- for (bldev = blacklist;
- bldev < blacklist + ARRAY_SIZE(blacklist);
- bldev++) {
- if (dev->vendor == bldev->vendor &&
- dev->device == bldev->device)
- return -ENODEV;
- }
-
- return 0;
-}
-
/*
* Given a complete unknown PCI device, try to use some heuristics to
* guess what the configuration might be, based on the pitiful PCI
@@ -3634,6 +3723,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
struct pci_serial_quirk *quirk;
struct serial_private *priv;
const struct pciserial_board *board;
+ const struct pci_device_id *exclude;
struct pciserial_board tmp;
int rc;
@@ -3652,9 +3742,9 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
board = &pci_boards[ent->driver_data];
- rc = serial_pci_is_blacklisted(dev);
- if (rc)
- return rc;
+ exclude = pci_match_id(blacklist, dev);
+ if (exclude)
+ return -ENODEV;
rc = pcim_enable_device(dev);
pci_save_state(dev);
@@ -4575,10 +4665,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
*/
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4587,10 +4677,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4599,10 +4689,10 @@ static const struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4611,13 +4701,13 @@ static const struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7951 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4626,16 +4716,16 @@ static const struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4644,13 +4734,13 @@ static const struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
@@ -4659,19 +4749,19 @@ static const struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
/*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index b9bcbe20a2be..c47188860e32 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -113,6 +113,10 @@ static int serial_pxa_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (ret >= 0)
+ uart.port.line = ret;
+
uart.port.type = PORT_XSCALE;
uart.port.iotype = UPIO_MEM32;
uart.port.mapbase = mmres->start;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 089a6f285d5e..72966bc0ac76 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -335,6 +335,28 @@ config SERIAL_TEGRA
are enabled). This driver uses the APB DMA to achieve higher baudrate
and better performance.
+config SERIAL_TEGRA_TCU
+ tristate "NVIDIA Tegra Combined UART"
+ depends on ARCH_TEGRA && TEGRA_HSP_MBOX
+ select SERIAL_CORE
+ help
+ Support for the mailbox-based TCU (Tegra Combined UART) serial port.
+ TCU is a virtual serial port that allows multiplexing multiple data
+ streams into a single hardware serial port.
+
+config SERIAL_TEGRA_TCU_CONSOLE
+ bool "Support for console on a Tegra TCU serial port"
+ depends on SERIAL_TEGRA_TCU=y
+ select SERIAL_CORE_CONSOLE
+ default y
+ ---help---
+ If you say Y here, it will be possible to use a the Tegra TCU as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode).
+
+ If unsure, say Y.
+
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 1511e8a9f856..40b702aaa85e 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
+obj-$(CONFIG_SERIAL_TEGRA_TCU) += tegra-tcu.o
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 98f193a83392..061590795680 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -442,14 +442,10 @@ static struct console clps711x_console = {
static int uart_clps711x_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- int ret, index = np ? of_alias_get_id(np, "serial") : pdev->id;
struct clps711x_port *s;
struct resource *res;
struct clk *uart_clk;
- int irq;
-
- if (index < 0 || index >= UART_CLPS711X_NR)
- return -EINVAL;
+ int irq, ret;
s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
if (!s)
@@ -473,20 +469,11 @@ static int uart_clps711x_probe(struct platform_device *pdev)
if (s->rx_irq < 0)
return s->rx_irq;
- if (!np) {
- char syscon_name[9];
-
- sprintf(syscon_name, "syscon.%i", index + 1);
- s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name);
- if (IS_ERR(s->syscon))
- return PTR_ERR(s->syscon);
- } else {
- s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
- if (IS_ERR(s->syscon))
- return PTR_ERR(s->syscon);
- }
+ s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(s->syscon))
+ return PTR_ERR(s->syscon);
- s->port.line = index;
+ s->port.line = of_alias_get_id(np, "serial");
s->port.dev = &pdev->dev;
s->port.iotype = UPIO_MEM32;
s->port.mapbase = res->start;
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index debdd1b9e01a..ea1c85e3b432 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -426,6 +426,17 @@ static void lpuart_dma_tx_complete(void *arg)
spin_unlock_irqrestore(&sport->port.lock, flags);
}
+static dma_addr_t lpuart_dma_datareg_addr(struct lpuart_port *sport)
+{
+ switch (sport->port.iotype) {
+ case UPIO_MEM32:
+ return sport->port.mapbase + UARTDATA;
+ case UPIO_MEM32BE:
+ return sport->port.mapbase + UARTDATA + sizeof(u32) - 1;
+ }
+ return sport->port.mapbase + UARTDR;
+}
+
static int lpuart_dma_tx_request(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port,
@@ -433,7 +444,7 @@ static int lpuart_dma_tx_request(struct uart_port *port)
struct dma_slave_config dma_tx_sconfig = {};
int ret;
- dma_tx_sconfig.dst_addr = sport->port.mapbase + UARTDR;
+ dma_tx_sconfig.dst_addr = lpuart_dma_datareg_addr(sport);
dma_tx_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma_tx_sconfig.dst_maxburst = 1;
dma_tx_sconfig.direction = DMA_MEM_TO_DEV;
@@ -636,13 +647,19 @@ static void lpuart_start_tx(struct uart_port *port)
static void lpuart32_start_tx(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
+ struct circ_buf *xmit = &sport->port.state->xmit;
unsigned long temp;
- temp = lpuart32_read(port, UARTCTRL);
- lpuart32_write(port, temp | UARTCTRL_TIE, UARTCTRL);
+ if (sport->lpuart_dma_tx_use) {
+ if (!uart_circ_empty(xmit) && !uart_tx_stopped(port))
+ lpuart_dma_tx(sport);
+ } else {
+ temp = lpuart32_read(port, UARTCTRL);
+ lpuart32_write(port, temp | UARTCTRL_TIE, UARTCTRL);
- if (lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE)
- lpuart32_transmit_buffer(sport);
+ if (lpuart32_read(port, UARTSTAT) & UARTSTAT_TDRE)
+ lpuart32_transmit_buffer(sport);
+ }
}
/* return TIOCSER_TEMT when transmitter is not busy */
@@ -664,8 +681,18 @@ static unsigned int lpuart_tx_empty(struct uart_port *port)
static unsigned int lpuart32_tx_empty(struct uart_port *port)
{
- return (lpuart32_read(port, UARTSTAT) & UARTSTAT_TC) ?
- TIOCSER_TEMT : 0;
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ unsigned long stat = lpuart32_read(port, UARTSTAT);
+ unsigned long sfifo = lpuart32_read(port, UARTFIFO);
+
+ if (sport->dma_tx_in_progress)
+ return 0;
+
+ if (stat & UARTSTAT_TC && sfifo & UARTFIFO_TXEMPT)
+ return TIOCSER_TEMT;
+
+ return 0;
}
static bool lpuart_is_32(struct lpuart_port *sport)
@@ -862,11 +889,10 @@ static irqreturn_t lpuart32_int(int irq, void *dev_id)
rxcount = lpuart32_read(&sport->port, UARTWATER);
rxcount = rxcount >> UARTWATER_RXCNT_OFF;
- if (sts & UARTSTAT_RDRF || rxcount > 0)
+ if ((sts & UARTSTAT_RDRF || rxcount > 0) && !sport->lpuart_dma_rx_use)
lpuart32_rxint(irq, dev_id);
- if ((sts & UARTSTAT_TDRE) &&
- !(lpuart32_read(&sport->port, UARTBAUD) & UARTBAUD_TDMAE))
+ if ((sts & UARTSTAT_TDRE) && !sport->lpuart_dma_tx_use)
lpuart_txint(irq, dev_id);
lpuart32_write(&sport->port, sts, UARTSTAT);
@@ -881,18 +907,31 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport)
struct circ_buf *ring = &sport->rx_ring;
unsigned long flags;
int count = 0;
- unsigned char sr;
- sr = readb(sport->port.membase + UARTSR1);
+ if (lpuart_is_32(sport)) {
+ unsigned long sr = lpuart32_read(&sport->port, UARTSTAT);
- if (sr & (UARTSR1_PE | UARTSR1_FE)) {
- /* Read DR to clear the error flags */
- readb(sport->port.membase + UARTDR);
+ if (sr & (UARTSTAT_PE | UARTSTAT_FE)) {
+ /* Read DR to clear the error flags */
+ lpuart32_read(&sport->port, UARTDATA);
+
+ if (sr & UARTSTAT_PE)
+ sport->port.icount.parity++;
+ else if (sr & UARTSTAT_FE)
+ sport->port.icount.frame++;
+ }
+ } else {
+ unsigned char sr = readb(sport->port.membase + UARTSR1);
- if (sr & UARTSR1_PE)
- sport->port.icount.parity++;
- else if (sr & UARTSR1_FE)
- sport->port.icount.frame++;
+ if (sr & (UARTSR1_PE | UARTSR1_FE)) {
+ /* Read DR to clear the error flags */
+ readb(sport->port.membase + UARTDR);
+
+ if (sr & UARTSR1_PE)
+ sport->port.icount.parity++;
+ else if (sr & UARTSR1_FE)
+ sport->port.icount.frame++;
+ }
}
async_tx_ack(sport->dma_rx_desc);
@@ -1015,7 +1054,7 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
return -EINVAL;
}
- dma_rx_sconfig.src_addr = sport->port.mapbase + UARTDR;
+ dma_rx_sconfig.src_addr = lpuart_dma_datareg_addr(sport);
dma_rx_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma_rx_sconfig.src_maxburst = 1;
dma_rx_sconfig.direction = DMA_DEV_TO_MEM;
@@ -1043,8 +1082,14 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
sport->dma_rx_cookie = dmaengine_submit(sport->dma_rx_desc);
dma_async_issue_pending(sport->dma_rx_chan);
- writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_RDMAS,
- sport->port.membase + UARTCR5);
+ if (lpuart_is_32(sport)) {
+ unsigned long temp = lpuart32_read(&sport->port, UARTBAUD);
+
+ lpuart32_write(&sport->port, temp | UARTBAUD_RDMAE, UARTBAUD);
+ } else {
+ writeb(readb(sport->port.membase + UARTCR5) | UARTCR5_RDMAS,
+ sport->port.membase + UARTCR5);
+ }
return 0;
}
@@ -1334,6 +1379,8 @@ static int lpuart32_startup(struct uart_port *port)
sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) &
UARTFIFO_FIFOSIZE_MASK) - 1);
+ sport->port.fifosize = sport->txfifo_size;
+
sport->rxfifo_size = 0x1 << (((temp >> UARTFIFO_RXSIZE_OFF) &
UARTFIFO_FIFOSIZE_MASK) - 1);
@@ -1342,8 +1389,41 @@ static int lpuart32_startup(struct uart_port *port)
lpuart32_setup_watermark(sport);
temp = lpuart32_read(&sport->port, UARTCTRL);
- temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE);
- temp |= UARTCTRL_ILIE;
+ temp |= UARTCTRL_RE | UARTCTRL_TE | UARTCTRL_ILIE;
+ lpuart32_write(&sport->port, temp, UARTCTRL);
+
+ if (sport->dma_rx_chan && !lpuart_start_rx_dma(sport)) {
+ /* set Rx DMA timeout */
+ sport->dma_rx_timeout = msecs_to_jiffies(DMA_RX_TIMEOUT);
+ if (!sport->dma_rx_timeout)
+ sport->dma_rx_timeout = 1;
+
+ sport->lpuart_dma_rx_use = true;
+ rx_dma_timer_init(sport);
+ } else {
+ sport->lpuart_dma_rx_use = false;
+ }
+
+ if (sport->dma_tx_chan && !lpuart_dma_tx_request(port)) {
+ init_waitqueue_head(&sport->dma_wait);
+ sport->lpuart_dma_tx_use = true;
+ temp = lpuart32_read(&sport->port, UARTBAUD);
+ lpuart32_write(&sport->port, temp | UARTBAUD_TDMAE, UARTBAUD);
+ } else {
+ sport->lpuart_dma_tx_use = false;
+ }
+
+ if (sport->lpuart_dma_rx_use) {
+ /* RXWATER must be 0 */
+ temp = lpuart32_read(&sport->port, UARTWATER);
+ temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF);
+ lpuart32_write(&sport->port, temp, UARTWATER);
+ }
+ temp = lpuart32_read(&sport->port, UARTCTRL);
+ if (!sport->lpuart_dma_rx_use)
+ temp |= UARTCTRL_RIE;
+ if (!sport->lpuart_dma_tx_use)
+ temp |= UARTCTRL_TIE;
lpuart32_write(&sport->port, temp, UARTCTRL);
spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -1384,6 +1464,8 @@ static void lpuart_shutdown(struct uart_port *port)
static void lpuart32_shutdown(struct uart_port *port)
{
+ struct lpuart_port *sport =
+ container_of(port, struct lpuart_port, port);
unsigned long temp;
unsigned long flags;
@@ -1396,6 +1478,21 @@ static void lpuart32_shutdown(struct uart_port *port)
lpuart32_write(port, temp, UARTCTRL);
spin_unlock_irqrestore(&port->lock, flags);
+
+ if (sport->lpuart_dma_rx_use) {
+ del_timer_sync(&sport->lpuart_timer);
+ lpuart_dma_rx_free(&sport->port);
+ }
+
+ if (sport->lpuart_dma_tx_use) {
+ if (wait_event_interruptible(sport->dma_wait,
+ !sport->dma_tx_in_progress)) {
+ sport->dma_tx_in_progress = false;
+ dmaengine_terminate_all(sport->dma_tx_chan);
+ }
+
+ lpuart32_stop_tx(port);
+ }
}
static void
@@ -1621,7 +1718,10 @@ lpuart32_serial_setbrg(struct lpuart_port *sport, unsigned int baudrate)
tmp &= ~UARTBAUD_SBR_MASK;
tmp |= sbr & UARTBAUD_SBR_MASK;
- tmp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
+ if (!sport->lpuart_dma_rx_use)
+ tmp &= ~UARTBAUD_RDMAE;
+ if (!sport->lpuart_dma_tx_use)
+ tmp &= ~UARTBAUD_TDMAE;
lpuart32_write(&sport->port, tmp, UARTBAUD);
}
@@ -1699,6 +1799,18 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
/* ask the core to calculate the divisor */
baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 4);
+ /*
+ * Need to update the Ring buffer length according to the selected
+ * baud rate and restart Rx DMA path.
+ *
+ * Since timer function acqures sport->port.lock, need to stop before
+ * acquring same lock because otherwise del_timer_sync() can deadlock.
+ */
+ if (old && sport->lpuart_dma_rx_use) {
+ del_timer_sync(&sport->lpuart_timer);
+ lpuart_dma_rx_free(&sport->port);
+ }
+
spin_lock_irqsave(&sport->port.lock, flags);
sport->port.read_status_mask = 0;
@@ -1737,6 +1849,13 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
lpuart32_write(&sport->port, ctrl, UARTCTRL);
/* restore control register */
+ if (old && sport->lpuart_dma_rx_use) {
+ if (!lpuart_start_rx_dma(sport))
+ rx_dma_timer_init(sport);
+ else
+ sport->lpuart_dma_rx_use = false;
+ }
+
spin_unlock_irqrestore(&sport->port.lock, flags);
}
@@ -2306,8 +2425,14 @@ static int lpuart_suspend(struct device *dev)
}
/* Disable Rx DMA to use UART port as wakeup source */
- writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_RDMAS,
- sport->port.membase + UARTCR5);
+ if (lpuart_is_32(sport)) {
+ temp = lpuart32_read(&sport->port, UARTBAUD);
+ lpuart32_write(&sport->port, temp & ~UARTBAUD_RDMAE,
+ UARTBAUD);
+ } else {
+ writeb(readb(sport->port.membase + UARTCR5) &
+ ~UARTCR5_RDMAS, sport->port.membase + UARTCR5);
+ }
}
if (sport->lpuart_dma_tx_use) {
@@ -2333,8 +2458,7 @@ static int lpuart_resume(struct device *dev)
if (lpuart_is_32(sport)) {
lpuart32_setup_watermark(sport);
temp = lpuart32_read(&sport->port, UARTCTRL);
- temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
- UARTCTRL_TE | UARTCTRL_ILIE);
+ temp |= UARTCTRL_RE | UARTCTRL_TE | UARTCTRL_ILIE;
lpuart32_write(&sport->port, temp, UARTCTRL);
} else {
lpuart_setup_watermark(sport);
@@ -2353,14 +2477,36 @@ static int lpuart_resume(struct device *dev)
}
if (sport->dma_tx_chan && !lpuart_dma_tx_request(&sport->port)) {
- init_waitqueue_head(&sport->dma_wait);
- sport->lpuart_dma_tx_use = true;
+ init_waitqueue_head(&sport->dma_wait);
+ sport->lpuart_dma_tx_use = true;
+ if (lpuart_is_32(sport)) {
+ temp = lpuart32_read(&sport->port, UARTBAUD);
+ lpuart32_write(&sport->port,
+ temp | UARTBAUD_TDMAE, UARTBAUD);
+ } else {
writeb(readb(sport->port.membase + UARTCR5) |
UARTCR5_TDMAS, sport->port.membase + UARTCR5);
+ }
} else {
sport->lpuart_dma_tx_use = false;
}
+ if (lpuart_is_32(sport)) {
+ if (sport->lpuart_dma_rx_use) {
+ /* RXWATER must be 0 */
+ temp = lpuart32_read(&sport->port, UARTWATER);
+ temp &= ~(UARTWATER_WATER_MASK <<
+ UARTWATER_RXWATER_OFF);
+ lpuart32_write(&sport->port, temp, UARTWATER);
+ }
+ temp = lpuart32_read(&sport->port, UARTCTRL);
+ if (!sport->lpuart_dma_rx_use)
+ temp |= UARTCTRL_RIE;
+ if (!sport->lpuart_dma_tx_use)
+ temp |= UARTCTRL_TIE;
+ lpuart32_write(&sport->port, temp, UARTCTRL);
+ }
+
uart_resume_port(&lpuart_reg, &sport->port);
return 0;
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index d1d73261575b..f4e27d0ad947 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -151,6 +151,8 @@ static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
local_irq_restore(flags);
}
+static void lpc32xx_loopback_set(resource_size_t mapbase, int state);
+
static int __init lpc32xx_hsuart_console_setup(struct console *co,
char *options)
{
@@ -170,6 +172,8 @@ static int __init lpc32xx_hsuart_console_setup(struct console *co,
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
+ lpc32xx_loopback_set(port->mapbase, 0); /* get out of loopback mode */
+
return uart_set_options(port, co, baud, parity, bits, flow);
}
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 4f479841769a..f5bdde405627 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -248,6 +248,7 @@
struct max310x_devtype {
char name[9];
int nr;
+ u8 mode1;
int (*detect)(struct device *);
void (*power)(struct uart_port *, int);
};
@@ -410,6 +411,7 @@ static void max14830_power(struct uart_port *port, int on)
static const struct max310x_devtype max3107_devtype = {
.name = "MAX3107",
.nr = 1,
+ .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT,
.detect = max3107_detect,
.power = max310x_power,
};
@@ -417,6 +419,7 @@ static const struct max310x_devtype max3107_devtype = {
static const struct max310x_devtype max3108_devtype = {
.name = "MAX3108",
.nr = 1,
+ .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT,
.detect = max3108_detect,
.power = max310x_power,
};
@@ -424,6 +427,7 @@ static const struct max310x_devtype max3108_devtype = {
static const struct max310x_devtype max3109_devtype = {
.name = "MAX3109",
.nr = 2,
+ .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT,
.detect = max3109_detect,
.power = max310x_power,
};
@@ -431,6 +435,7 @@ static const struct max310x_devtype max3109_devtype = {
static const struct max310x_devtype max14830_devtype = {
.name = "MAX14830",
.nr = 4,
+ .mode1 = MAX310X_MODE1_IRQSEL_BIT,
.detect = max14830_detect,
.power = max14830_power,
};
@@ -1197,8 +1202,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
return PTR_ERR(regmap);
/* Alloc port structure */
- s = devm_kzalloc(dev, sizeof(*s) +
- sizeof(struct max310x_one) * devtype->nr, GFP_KERNEL);
+ s = devm_kzalloc(dev, struct_size(s, p, devtype->nr), GFP_KERNEL);
if (!s) {
dev_err(dev, "Error allocating port structure\n");
return -ENOMEM;
@@ -1258,9 +1262,8 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
MAX310X_BRGDIVLSB_REG + offs, &ret);
} while (ret != 0x01);
- regmap_update_bits(s->regmap, MAX310X_MODE1_REG + offs,
- MAX310X_MODE1_AUTOSLEEP_BIT,
- MAX310X_MODE1_AUTOSLEEP_BIT);
+ regmap_write(s->regmap, MAX310X_MODE1_REG + offs,
+ devtype->mode1);
}
uartclk = max310x_set_ref_clk(dev, s, freq, xtal);
@@ -1294,10 +1297,6 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0);
/* Clear IRQ status register */
max310x_port_read(&s->p[i].port, MAX310X_IRQSTS_REG);
- /* Enable IRQ pin */
- max310x_port_update(&s->p[i].port, MAX310X_MODE1_REG,
- MAX310X_MODE1_IRQSEL_BIT,
- MAX310X_MODE1_IRQSEL_BIT);
/* Initialize queue for start TX */
INIT_WORK(&s->p[i].tx_work, max310x_wq_proc);
/* Initialize queue for changing LOOPBACK mode */
@@ -1467,10 +1466,10 @@ static int __init max310x_uart_init(void)
return ret;
#ifdef CONFIG_SPI_MASTER
- spi_register_driver(&max310x_spi_driver);
+ ret = spi_register_driver(&max310x_spi_driver);
#endif
- return 0;
+ return ret;
}
module_init(max310x_uart_init);
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 8a842591b37c..fbc5bc022a39 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -72,7 +72,8 @@
#define AML_UART_BAUD_USE BIT(23)
#define AML_UART_BAUD_XTAL BIT(24)
-#define AML_UART_PORT_NUM 6
+#define AML_UART_PORT_NUM 12
+#define AML_UART_PORT_OFFSET 6
#define AML_UART_DEV_NAME "ttyAML"
@@ -654,10 +655,20 @@ static int meson_uart_probe(struct platform_device *pdev)
struct resource *res_mem, *res_irq;
struct uart_port *port;
int ret = 0;
+ int id = -1;
if (pdev->dev.of_node)
pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (pdev->id < 0) {
+ for (id = AML_UART_PORT_OFFSET; id < AML_UART_PORT_NUM; id++) {
+ if (!meson_ports[id]) {
+ pdev->id = id;
+ break;
+ }
+ }
+ }
+
if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM)
return -EINVAL;
diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
index 9f8f63719126..587b42f754cb 100644
--- a/drivers/tty/serial/mps2-uart.c
+++ b/drivers/tty/serial/mps2-uart.c
@@ -22,6 +22,7 @@
#include <linux/serial_core.h>
#include <linux/tty_flip.h>
#include <linux/types.h>
+#include <linux/idr.h>
#define SERIAL_NAME "ttyMPS"
#define DRIVER_NAME "mps2-uart"
@@ -65,11 +66,14 @@
#define MPS2_MAX_PORTS 3
+#define UART_PORT_COMBINED_IRQ BIT(0)
+
struct mps2_uart_port {
struct uart_port port;
struct clk *clk;
unsigned int tx_irq;
unsigned int rx_irq;
+ unsigned int flags;
};
static inline struct mps2_uart_port *to_mps2_port(struct uart_port *port)
@@ -264,6 +268,20 @@ static irqreturn_t mps2_uart_oerrirq(int irq, void *data)
return handled;
}
+static irqreturn_t mps2_uart_combinedirq(int irq, void *data)
+{
+ if (mps2_uart_rxirq(irq, data) == IRQ_HANDLED)
+ return IRQ_HANDLED;
+
+ if (mps2_uart_txirq(irq, data) == IRQ_HANDLED)
+ return IRQ_HANDLED;
+
+ if (mps2_uart_oerrirq(irq, data) == IRQ_HANDLED)
+ return IRQ_HANDLED;
+
+ return IRQ_NONE;
+}
+
static int mps2_uart_startup(struct uart_port *port)
{
struct mps2_uart_port *mps_port = to_mps2_port(port);
@@ -274,26 +292,37 @@ static int mps2_uart_startup(struct uart_port *port)
mps2_uart_write8(port, control, UARTn_CTRL);
- ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0,
- MAKE_NAME(-rx), mps_port);
- if (ret) {
- dev_err(port->dev, "failed to register rxirq (%d)\n", ret);
- return ret;
- }
+ if (mps_port->flags & UART_PORT_COMBINED_IRQ) {
+ ret = request_irq(port->irq, mps2_uart_combinedirq, 0,
+ MAKE_NAME(-combined), mps_port);
- ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0,
- MAKE_NAME(-tx), mps_port);
- if (ret) {
- dev_err(port->dev, "failed to register txirq (%d)\n", ret);
- goto err_free_rxirq;
- }
+ if (ret) {
+ dev_err(port->dev, "failed to register combinedirq (%d)\n", ret);
+ return ret;
+ }
+ } else {
+ ret = request_irq(port->irq, mps2_uart_oerrirq, IRQF_SHARED,
+ MAKE_NAME(-overrun), mps_port);
+
+ if (ret) {
+ dev_err(port->dev, "failed to register oerrirq (%d)\n", ret);
+ return ret;
+ }
+
+ ret = request_irq(mps_port->rx_irq, mps2_uart_rxirq, 0,
+ MAKE_NAME(-rx), mps_port);
+ if (ret) {
+ dev_err(port->dev, "failed to register rxirq (%d)\n", ret);
+ goto err_free_oerrirq;
+ }
- ret = request_irq(port->irq, mps2_uart_oerrirq, IRQF_SHARED,
- MAKE_NAME(-overrun), mps_port);
+ ret = request_irq(mps_port->tx_irq, mps2_uart_txirq, 0,
+ MAKE_NAME(-tx), mps_port);
+ if (ret) {
+ dev_err(port->dev, "failed to register txirq (%d)\n", ret);
+ goto err_free_rxirq;
+ }
- if (ret) {
- dev_err(port->dev, "failed to register oerrirq (%d)\n", ret);
- goto err_free_txirq;
}
control |= UARTn_CTRL_RX_GRP | UARTn_CTRL_TX_GRP;
@@ -302,10 +331,10 @@ static int mps2_uart_startup(struct uart_port *port)
return 0;
-err_free_txirq:
- free_irq(mps_port->tx_irq, mps_port);
err_free_rxirq:
free_irq(mps_port->rx_irq, mps_port);
+err_free_oerrirq:
+ free_irq(port->irq, mps_port);
return ret;
}
@@ -319,8 +348,11 @@ static void mps2_uart_shutdown(struct uart_port *port)
mps2_uart_write8(port, control, UARTn_CTRL);
- free_irq(mps_port->rx_irq, mps_port);
- free_irq(mps_port->tx_irq, mps_port);
+ if (!(mps_port->flags & UART_PORT_COMBINED_IRQ)) {
+ free_irq(mps_port->rx_irq, mps_port);
+ free_irq(mps_port->tx_irq, mps_port);
+ }
+
free_irq(port->irq, mps_port);
}
@@ -397,7 +429,7 @@ static const struct uart_ops mps2_uart_pops = {
.verify_port = mps2_uart_verify_port,
};
-static struct mps2_uart_port mps2_uart_ports[MPS2_MAX_PORTS];
+static DEFINE_IDR(ports_idr);
#ifdef CONFIG_SERIAL_MPS2_UART_CONSOLE
static void mps2_uart_console_putchar(struct uart_port *port, int ch)
@@ -410,7 +442,8 @@ static void mps2_uart_console_putchar(struct uart_port *port, int ch)
static void mps2_uart_console_write(struct console *co, const char *s, unsigned int cnt)
{
- struct uart_port *port = &mps2_uart_ports[co->index].port;
+ struct mps2_uart_port *mps_port = idr_find(&ports_idr, co->index);
+ struct uart_port *port = &mps_port->port;
uart_console_write(port, s, cnt, mps2_uart_console_putchar);
}
@@ -426,7 +459,10 @@ static int mps2_uart_console_setup(struct console *co, char *options)
if (co->index < 0 || co->index >= MPS2_MAX_PORTS)
return -ENODEV;
- mps_port = &mps2_uart_ports[co->index];
+ mps_port = idr_find(&ports_idr, co->index);
+
+ if (!mps_port)
+ return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -487,27 +523,36 @@ static struct uart_driver mps2_uart_driver = {
.cons = MPS2_SERIAL_CONSOLE,
};
-static struct mps2_uart_port *mps2_of_get_port(struct platform_device *pdev)
+static int mps2_of_get_port(struct platform_device *pdev,
+ struct mps2_uart_port *mps_port)
{
struct device_node *np = pdev->dev.of_node;
int id;
if (!np)
- return NULL;
+ return -ENODEV;
id = of_alias_get_id(np, "serial");
+
if (id < 0)
- id = 0;
+ id = idr_alloc_cyclic(&ports_idr, (void *)mps_port, 0, MPS2_MAX_PORTS, GFP_KERNEL);
+ else
+ id = idr_alloc(&ports_idr, (void *)mps_port, id, MPS2_MAX_PORTS, GFP_KERNEL);
- if (WARN_ON(id >= MPS2_MAX_PORTS))
- return NULL;
+ if (id < 0)
+ return id;
+
+ /* Only combined irq is presesnt */
+ if (platform_irq_count(pdev) == 1)
+ mps_port->flags |= UART_PORT_COMBINED_IRQ;
+
+ mps_port->port.line = id;
- mps2_uart_ports[id].port.line = id;
- return &mps2_uart_ports[id];
+ return 0;
}
-static int mps2_init_port(struct mps2_uart_port *mps_port,
- struct platform_device *pdev)
+static int mps2_init_port(struct platform_device *pdev,
+ struct mps2_uart_port *mps_port)
{
struct resource *res;
int ret;
@@ -519,11 +564,6 @@ static int mps2_init_port(struct mps2_uart_port *mps_port,
mps_port->port.mapbase = res->start;
mps_port->port.mapsize = resource_size(res);
-
- mps_port->rx_irq = platform_get_irq(pdev, 0);
- mps_port->tx_irq = platform_get_irq(pdev, 1);
- mps_port->port.irq = platform_get_irq(pdev, 2);
-
mps_port->port.iotype = UPIO_MEM;
mps_port->port.flags = UPF_BOOT_AUTOCONF;
mps_port->port.fifosize = 1;
@@ -542,6 +582,15 @@ static int mps2_init_port(struct mps2_uart_port *mps_port,
clk_disable_unprepare(mps_port->clk);
+
+ if (mps_port->flags & UART_PORT_COMBINED_IRQ) {
+ mps_port->port.irq = platform_get_irq(pdev, 0);
+ } else {
+ mps_port->rx_irq = platform_get_irq(pdev, 0);
+ mps_port->tx_irq = platform_get_irq(pdev, 1);
+ mps_port->port.irq = platform_get_irq(pdev, 2);
+ }
+
return ret;
}
@@ -550,11 +599,16 @@ static int mps2_serial_probe(struct platform_device *pdev)
struct mps2_uart_port *mps_port;
int ret;
- mps_port = mps2_of_get_port(pdev);
- if (!mps_port)
- return -ENODEV;
+ mps_port = devm_kzalloc(&pdev->dev, sizeof(struct mps2_uart_port), GFP_KERNEL);
+
+ if (!mps_port)
+ return -ENOMEM;
+
+ ret = mps2_of_get_port(pdev, mps_port);
+ if (ret)
+ return ret;
- ret = mps2_init_port(mps_port, pdev);
+ ret = mps2_init_port(pdev, mps_port);
if (ret)
return ret;
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 736b74fd6623..109096033bb1 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1634,7 +1634,7 @@ static void msm_console_write(struct console *co, const char *s,
__msm_console_write(port, s, count, msm_port->is_uartdm);
}
-static int __init msm_console_setup(struct console *co, char *options)
+static int msm_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 115200;
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 38016609c7fa..3bcec1c20219 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -89,7 +89,7 @@
#define DEF_FIFO_DEPTH_WORDS 16
#define DEF_TX_WM 2
#define DEF_FIFO_WIDTH_BITS 32
-#define UART_CONSOLE_RX_WM 2
+#define UART_RX_WM 2
#define MAX_LOOPBACK_CFG 3
#ifdef CONFIG_CONSOLE_POLL
@@ -105,10 +105,6 @@ struct qcom_geni_serial_port {
u32 tx_fifo_depth;
u32 tx_fifo_width;
u32 rx_fifo_depth;
- u32 tx_wm;
- u32 rx_wm;
- u32 rx_rfr;
- enum geni_se_xfer_mode xfer_mode;
bool setup;
int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
unsigned int baud;
@@ -228,7 +224,7 @@ static unsigned int qcom_geni_serial_get_mctrl(struct uart_port *uport)
if (uart_console(uport)) {
mctrl |= TIOCM_CTS;
} else {
- geni_ios = readl_relaxed(uport->membase + SE_GENI_IOS);
+ geni_ios = readl(uport->membase + SE_GENI_IOS);
if (!(geni_ios & IO2_DATA_IN))
mctrl |= TIOCM_CTS;
}
@@ -246,7 +242,7 @@ static void qcom_geni_serial_set_mctrl(struct uart_port *uport,
if (!(mctrl & TIOCM_RTS))
uart_manual_rfr = UART_MANUAL_RFR_EN | UART_RFR_NOT_READY;
- writel_relaxed(uart_manual_rfr, uport->membase + SE_UART_MANUAL_RFR);
+ writel(uart_manual_rfr, uport->membase + SE_UART_MANUAL_RFR);
}
static const char *qcom_geni_serial_get_type(struct uart_port *uport)
@@ -275,9 +271,6 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
unsigned int fifo_bits;
unsigned long timeout_us = 20000;
- /* Ensure polling is not re-ordered before the prior writes/reads */
- mb();
-
if (uport->private_data) {
port = to_dev_port(uport, uport);
baud = port->baud;
@@ -297,7 +290,7 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
*/
timeout_us = DIV_ROUND_UP(timeout_us, 10) * 10;
while (timeout_us) {
- reg = readl_relaxed(uport->membase + offset);
+ reg = readl(uport->membase + offset);
if ((bool)(reg & field) == set)
return true;
udelay(10);
@@ -310,7 +303,7 @@ static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size)
{
u32 m_cmd;
- writel_relaxed(xmit_size, uport->membase + SE_UART_TX_TRANS_LEN);
+ writel(xmit_size, uport->membase + SE_UART_TX_TRANS_LEN);
m_cmd = UART_START_TX << M_OPCODE_SHFT;
writel(m_cmd, uport->membase + SE_GENI_M_CMD0);
}
@@ -323,13 +316,13 @@ static void qcom_geni_serial_poll_tx_done(struct uart_port *uport)
done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
M_CMD_DONE_EN, true);
if (!done) {
- writel_relaxed(M_GENI_CMD_ABORT, uport->membase +
+ writel(M_GENI_CMD_ABORT, uport->membase +
SE_GENI_M_CMD_CTRL_REG);
irq_clear |= M_CMD_ABORT_EN;
qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
M_CMD_ABORT_EN, true);
}
- writel_relaxed(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR);
+ writel(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR);
}
static void qcom_geni_serial_abort_rx(struct uart_port *uport)
@@ -339,8 +332,8 @@ static void qcom_geni_serial_abort_rx(struct uart_port *uport)
writel(S_GENI_CMD_ABORT, uport->membase + SE_GENI_S_CMD_CTRL_REG);
qcom_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG,
S_GENI_CMD_ABORT, false);
- writel_relaxed(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR);
- writel_relaxed(FORCE_DEFAULT, uport->membase + GENI_FORCE_DEFAULT_REG);
+ writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR);
+ writel(FORCE_DEFAULT, uport->membase + GENI_FORCE_DEFAULT_REG);
}
#ifdef CONFIG_CONSOLE_POLL
@@ -349,19 +342,13 @@ static int qcom_geni_serial_get_char(struct uart_port *uport)
u32 rx_fifo;
u32 status;
- status = readl_relaxed(uport->membase + SE_GENI_M_IRQ_STATUS);
- writel_relaxed(status, uport->membase + SE_GENI_M_IRQ_CLEAR);
+ status = readl(uport->membase + SE_GENI_M_IRQ_STATUS);
+ writel(status, uport->membase + SE_GENI_M_IRQ_CLEAR);
- status = readl_relaxed(uport->membase + SE_GENI_S_IRQ_STATUS);
- writel_relaxed(status, uport->membase + SE_GENI_S_IRQ_CLEAR);
+ status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
+ writel(status, uport->membase + SE_GENI_S_IRQ_CLEAR);
- /*
- * Ensure the writes to clear interrupts is not re-ordered after
- * reading the data.
- */
- mb();
-
- status = readl_relaxed(uport->membase + SE_GENI_RX_FIFO_STATUS);
+ status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS);
if (!(status & RX_FIFO_WC_MSK))
return NO_POLL_CHAR;
@@ -372,15 +359,12 @@ static int qcom_geni_serial_get_char(struct uart_port *uport)
static void qcom_geni_serial_poll_put_char(struct uart_port *uport,
unsigned char c)
{
- struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
-
- writel_relaxed(port->tx_wm, uport->membase + SE_GENI_TX_WATERMARK_REG);
+ writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
qcom_geni_serial_setup_tx(uport, 1);
WARN_ON(!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
M_TX_FIFO_WATERMARK_EN, true));
- writel_relaxed(c, uport->membase + SE_GENI_TX_FIFOn);
- writel_relaxed(M_TX_FIFO_WATERMARK_EN, uport->membase +
- SE_GENI_M_IRQ_CLEAR);
+ writel(c, uport->membase + SE_GENI_TX_FIFOn);
+ writel(M_TX_FIFO_WATERMARK_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
qcom_geni_serial_poll_tx_done(uport);
}
#endif
@@ -388,7 +372,7 @@ static void qcom_geni_serial_poll_put_char(struct uart_port *uport,
#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
static void qcom_geni_serial_wr_char(struct uart_port *uport, int ch)
{
- writel_relaxed(ch, uport->membase + SE_GENI_TX_FIFOn);
+ writel(ch, uport->membase + SE_GENI_TX_FIFOn);
}
static void
@@ -407,7 +391,7 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s,
bytes_to_send++;
}
- writel_relaxed(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
+ writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
qcom_geni_serial_setup_tx(uport, bytes_to_send);
for (i = 0; i < count; ) {
size_t chars_to_write = 0;
@@ -425,7 +409,7 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s,
chars_to_write = min_t(size_t, count - i, avail / 2);
uart_console_write(uport, s + i, chars_to_write,
qcom_geni_serial_wr_char);
- writel_relaxed(M_TX_FIFO_WATERMARK_EN, uport->membase +
+ writel(M_TX_FIFO_WATERMARK_EN, uport->membase +
SE_GENI_M_IRQ_CLEAR);
i += chars_to_write;
}
@@ -454,7 +438,7 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s,
else
spin_lock_irqsave(&uport->lock, flags);
- geni_status = readl_relaxed(uport->membase + SE_GENI_STATUS);
+ geni_status = readl(uport->membase + SE_GENI_STATUS);
/* Cancel the current write to log the fault */
if (!locked) {
@@ -464,11 +448,10 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s,
geni_se_abort_m_cmd(&port->se);
qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
M_CMD_ABORT_EN, true);
- writel_relaxed(M_CMD_ABORT_EN, uport->membase +
+ writel(M_CMD_ABORT_EN, uport->membase +
SE_GENI_M_IRQ_CLEAR);
}
- writel_relaxed(M_CMD_CANCEL_EN, uport->membase +
- SE_GENI_M_IRQ_CLEAR);
+ writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
} else if ((geni_status & M_GENI_CMD_ACTIVE) && !port->tx_remaining) {
/*
* It seems we can't interrupt existing transfers if all data
@@ -477,9 +460,8 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s,
qcom_geni_serial_poll_tx_done(uport);
if (uart_circ_chars_pending(&uport->state->xmit)) {
- irq_en = readl_relaxed(uport->membase +
- SE_GENI_M_IRQ_EN);
- writel_relaxed(irq_en | M_TX_FIFO_WATERMARK_EN,
+ irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
+ writel(irq_en | M_TX_FIFO_WATERMARK_EN,
uport->membase + SE_GENI_M_IRQ_EN);
}
}
@@ -567,29 +549,20 @@ static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
static void qcom_geni_serial_start_tx(struct uart_port *uport)
{
u32 irq_en;
- struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
u32 status;
- if (port->xfer_mode == GENI_SE_FIFO) {
- /*
- * readl ensures reading & writing of IRQ_EN register
- * is not re-ordered before checking the status of the
- * Serial Engine.
- */
- status = readl(uport->membase + SE_GENI_STATUS);
- if (status & M_GENI_CMD_ACTIVE)
- return;
+ status = readl(uport->membase + SE_GENI_STATUS);
+ if (status & M_GENI_CMD_ACTIVE)
+ return;
- if (!qcom_geni_serial_tx_empty(uport))
- return;
+ if (!qcom_geni_serial_tx_empty(uport))
+ return;
- irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
- irq_en |= M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN;
+ irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
+ irq_en |= M_TX_FIFO_WATERMARK_EN | M_CMD_DONE_EN;
- writel_relaxed(port->tx_wm, uport->membase +
- SE_GENI_TX_WATERMARK_REG);
- writel_relaxed(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
- }
+ writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG);
+ writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
}
static void qcom_geni_serial_stop_tx(struct uart_port *uport)
@@ -598,35 +571,24 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport)
u32 status;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
- irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
- irq_en &= ~M_CMD_DONE_EN;
- if (port->xfer_mode == GENI_SE_FIFO) {
- irq_en &= ~M_TX_FIFO_WATERMARK_EN;
- writel_relaxed(0, uport->membase +
- SE_GENI_TX_WATERMARK_REG);
- }
- writel_relaxed(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
- status = readl_relaxed(uport->membase + SE_GENI_STATUS);
+ irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
+ irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN);
+ writel(0, uport->membase + SE_GENI_TX_WATERMARK_REG);
+ writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
+ status = readl(uport->membase + SE_GENI_STATUS);
/* Possible stop tx is called multiple times. */
if (!(status & M_GENI_CMD_ACTIVE))
return;
- /*
- * Ensure cancel command write is not re-ordered before checking
- * the status of the Primary Sequencer.
- */
- mb();
-
geni_se_cancel_m_cmd(&port->se);
if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
M_CMD_CANCEL_EN, true)) {
geni_se_abort_m_cmd(&port->se);
qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
M_CMD_ABORT_EN, true);
- writel_relaxed(M_CMD_ABORT_EN, uport->membase +
- SE_GENI_M_IRQ_CLEAR);
+ writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
}
- writel_relaxed(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
+ writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
}
static void qcom_geni_serial_start_rx(struct uart_port *uport)
@@ -635,27 +597,19 @@ static void qcom_geni_serial_start_rx(struct uart_port *uport)
u32 status;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
- status = readl_relaxed(uport->membase + SE_GENI_STATUS);
+ status = readl(uport->membase + SE_GENI_STATUS);
if (status & S_GENI_CMD_ACTIVE)
qcom_geni_serial_stop_rx(uport);
- /*
- * Ensure setup command write is not re-ordered before checking
- * the status of the Secondary Sequencer.
- */
- mb();
-
geni_se_setup_s_cmd(&port->se, UART_START_READ, 0);
- if (port->xfer_mode == GENI_SE_FIFO) {
- irq_en = readl_relaxed(uport->membase + SE_GENI_S_IRQ_EN);
- irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN;
- writel_relaxed(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
+ irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
+ irq_en |= S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN;
+ writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
- irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
- irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
- writel_relaxed(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
- }
+ irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
+ irq_en |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
+ writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
}
static void qcom_geni_serial_stop_rx(struct uart_port *uport)
@@ -665,32 +619,24 @@ static void qcom_geni_serial_stop_rx(struct uart_port *uport)
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
u32 irq_clear = S_CMD_DONE_EN;
- if (port->xfer_mode == GENI_SE_FIFO) {
- irq_en = readl_relaxed(uport->membase + SE_GENI_S_IRQ_EN);
- irq_en &= ~(S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN);
- writel_relaxed(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
+ irq_en = readl(uport->membase + SE_GENI_S_IRQ_EN);
+ irq_en &= ~(S_RX_FIFO_WATERMARK_EN | S_RX_FIFO_LAST_EN);
+ writel(irq_en, uport->membase + SE_GENI_S_IRQ_EN);
- irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
- irq_en &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
- writel_relaxed(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
- }
+ irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
+ irq_en &= ~(M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
+ writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
- status = readl_relaxed(uport->membase + SE_GENI_STATUS);
+ status = readl(uport->membase + SE_GENI_STATUS);
/* Possible stop rx is called multiple times. */
if (!(status & S_GENI_CMD_ACTIVE))
return;
- /*
- * Ensure cancel command write is not re-ordered before checking
- * the status of the Secondary Sequencer.
- */
- mb();
-
geni_se_cancel_s_cmd(&port->se);
qcom_geni_serial_poll_bit(uport, SE_GENI_S_CMD_CTRL_REG,
S_GENI_CMD_CANCEL, false);
- status = readl_relaxed(uport->membase + SE_GENI_STATUS);
- writel_relaxed(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR);
+ status = readl(uport->membase + SE_GENI_STATUS);
+ writel(irq_clear, uport->membase + SE_GENI_S_IRQ_CLEAR);
if (status & S_GENI_CMD_ACTIVE)
qcom_geni_serial_abort_rx(uport);
}
@@ -704,7 +650,7 @@ static void qcom_geni_serial_handle_rx(struct uart_port *uport, bool drop)
u32 total_bytes;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
- status = readl_relaxed(uport->membase + SE_GENI_RX_FIFO_STATUS);
+ status = readl(uport->membase + SE_GENI_RX_FIFO_STATUS);
word_cnt = status & RX_FIFO_WC_MSK;
last_word_partial = status & RX_LAST;
last_word_byte_cnt = (status & RX_LAST_BYTE_VALID_MSK) >>
@@ -734,7 +680,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
unsigned int chunk;
int tail;
- status = readl_relaxed(uport->membase + SE_GENI_TX_FIFO_STATUS);
+ status = readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
/* Complete the current tx command before taking newly added data */
if (active)
@@ -760,9 +706,9 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
qcom_geni_serial_setup_tx(uport, pending);
port->tx_remaining = pending;
- irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
+ irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
if (!(irq_en & M_TX_FIFO_WATERMARK_EN))
- writel_relaxed(irq_en | M_TX_FIFO_WATERMARK_EN,
+ writel(irq_en | M_TX_FIFO_WATERMARK_EN,
uport->membase + SE_GENI_M_IRQ_EN);
}
@@ -795,14 +741,14 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
* cleared it in qcom_geni_serial_isr it will have already reasserted
* so we must clear it again here after our writes.
*/
- writel_relaxed(M_TX_FIFO_WATERMARK_EN,
+ writel(M_TX_FIFO_WATERMARK_EN,
uport->membase + SE_GENI_M_IRQ_CLEAR);
out_write_wakeup:
if (!port->tx_remaining) {
- irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
+ irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
if (irq_en & M_TX_FIFO_WATERMARK_EN)
- writel_relaxed(irq_en & ~M_TX_FIFO_WATERMARK_EN,
+ writel(irq_en & ~M_TX_FIFO_WATERMARK_EN,
uport->membase + SE_GENI_M_IRQ_EN);
}
@@ -812,12 +758,12 @@ out_write_wakeup:
static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
{
- unsigned int m_irq_status;
- unsigned int s_irq_status;
- unsigned int geni_status;
+ u32 m_irq_en;
+ u32 m_irq_status;
+ u32 s_irq_status;
+ u32 geni_status;
struct uart_port *uport = dev;
unsigned long flags;
- unsigned int m_irq_en;
bool drop_rx = false;
struct tty_port *tport = &uport->state->port;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
@@ -826,12 +772,12 @@ static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
return IRQ_NONE;
spin_lock_irqsave(&uport->lock, flags);
- m_irq_status = readl_relaxed(uport->membase + SE_GENI_M_IRQ_STATUS);
- s_irq_status = readl_relaxed(uport->membase + SE_GENI_S_IRQ_STATUS);
- geni_status = readl_relaxed(uport->membase + SE_GENI_STATUS);
- m_irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN);
- writel_relaxed(m_irq_status, uport->membase + SE_GENI_M_IRQ_CLEAR);
- writel_relaxed(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR);
+ m_irq_status = readl(uport->membase + SE_GENI_M_IRQ_STATUS);
+ s_irq_status = readl(uport->membase + SE_GENI_S_IRQ_STATUS);
+ geni_status = readl(uport->membase + SE_GENI_STATUS);
+ m_irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
+ writel(m_irq_status, uport->membase + SE_GENI_M_IRQ_CLEAR);
+ writel(s_irq_status, uport->membase + SE_GENI_S_IRQ_CLEAR);
if (WARN_ON(m_irq_status & M_ILLEGAL_CMD_EN))
goto out_unlock;
@@ -877,17 +823,6 @@ static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
}
-static void set_rfr_wm(struct qcom_geni_serial_port *port)
-{
- /*
- * Set RFR (Flow off) to FIFO_DEPTH - 2.
- * RX WM level at 10% RX_FIFO_DEPTH.
- * TX WM level at 10% TX_FIFO_DEPTH.
- */
- port->rx_rfr = port->rx_fifo_depth - 2;
- port->rx_wm = UART_CONSOLE_RX_WM;
- port->tx_wm = DEF_TX_WM;
-}
static void qcom_geni_serial_shutdown(struct uart_port *uport)
{
@@ -907,7 +842,7 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport)
static int qcom_geni_serial_port_setup(struct uart_port *uport)
{
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
- unsigned int rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
+ u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
u32 proto;
if (uart_console(uport)) {
@@ -928,21 +863,19 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
get_tx_fifo_size(port);
- set_rfr_wm(port);
- writel_relaxed(rxstale, uport->membase + SE_UART_RX_STALE_CNT);
+ writel(rxstale, uport->membase + SE_UART_RX_STALE_CNT);
/*
* Make an unconditional cancel on the main sequencer to reset
* it else we could end up in data loss scenarios.
*/
- port->xfer_mode = GENI_SE_FIFO;
if (uart_console(uport))
qcom_geni_serial_poll_tx_done(uport);
geni_se_config_packing(&port->se, BITS_PER_BYTE, port->tx_bytes_pw,
false, true, false);
geni_se_config_packing(&port->se, BITS_PER_BYTE, port->rx_bytes_pw,
false, false, true);
- geni_se_init(&port->se, port->rx_wm, port->rx_rfr);
- geni_se_select_mode(&port->se, port->xfer_mode);
+ geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2);
+ geni_se_select_mode(&port->se, GENI_SE_FIFO);
if (!uart_console(uport)) {
port->rx_fifo = devm_kcalloc(uport->dev,
port->rx_fifo_depth, sizeof(u32), GFP_KERNEL);
@@ -1008,14 +941,14 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
struct ktermios *termios, struct ktermios *old)
{
unsigned int baud;
- unsigned int bits_per_char;
- unsigned int tx_trans_cfg;
- unsigned int tx_parity_cfg;
- unsigned int rx_trans_cfg;
- unsigned int rx_parity_cfg;
- unsigned int stop_bit_len;
+ u32 bits_per_char;
+ u32 tx_trans_cfg;
+ u32 tx_parity_cfg;
+ u32 rx_trans_cfg;
+ u32 rx_parity_cfg;
+ u32 stop_bit_len;
unsigned int clk_div;
- unsigned long ser_clk_cfg;
+ u32 ser_clk_cfg;
struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
unsigned long clk_rate;
@@ -1033,10 +966,10 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
ser_clk_cfg |= clk_div << CLK_DIV_SHFT;
/* parity */
- tx_trans_cfg = readl_relaxed(uport->membase + SE_UART_TX_TRANS_CFG);
- tx_parity_cfg = readl_relaxed(uport->membase + SE_UART_TX_PARITY_CFG);
- rx_trans_cfg = readl_relaxed(uport->membase + SE_UART_RX_TRANS_CFG);
- rx_parity_cfg = readl_relaxed(uport->membase + SE_UART_RX_PARITY_CFG);
+ tx_trans_cfg = readl(uport->membase + SE_UART_TX_TRANS_CFG);
+ tx_parity_cfg = readl(uport->membase + SE_UART_TX_PARITY_CFG);
+ rx_trans_cfg = readl(uport->membase + SE_UART_RX_TRANS_CFG);
+ rx_parity_cfg = readl(uport->membase + SE_UART_RX_PARITY_CFG);
if (termios->c_cflag & PARENB) {
tx_trans_cfg |= UART_TX_PAR_EN;
rx_trans_cfg |= UART_RX_PAR_EN;
@@ -1092,17 +1025,17 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
uart_update_timeout(uport, termios->c_cflag, baud);
if (!uart_console(uport))
- writel_relaxed(port->loopback,
+ writel(port->loopback,
uport->membase + SE_UART_LOOPBACK_CFG);
- writel_relaxed(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
- writel_relaxed(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
- writel_relaxed(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
- writel_relaxed(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG);
- writel_relaxed(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
- writel_relaxed(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN);
- writel_relaxed(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
- writel_relaxed(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG);
- writel_relaxed(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG);
+ writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
+ writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
+ writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
+ writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG);
+ writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
+ writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN);
+ writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
+ writel(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG);
+ writel(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG);
out_restart_rx:
qcom_geni_serial_start_rx(uport);
}
@@ -1193,13 +1126,13 @@ static int __init qcom_geni_serial_earlycon_setup(struct earlycon_device *dev,
geni_se_init(&se, DEF_FIFO_DEPTH_WORDS / 2, DEF_FIFO_DEPTH_WORDS - 2);
geni_se_select_mode(&se, GENI_SE_FIFO);
- writel_relaxed(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
- writel_relaxed(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
- writel_relaxed(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
- writel_relaxed(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG);
- writel_relaxed(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
- writel_relaxed(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN);
- writel_relaxed(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
+ writel(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG);
+ writel(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG);
+ writel(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG);
+ writel(rx_parity_cfg, uport->membase + SE_UART_RX_PARITY_CFG);
+ writel(bits_per_char, uport->membase + SE_UART_TX_WORD_LEN);
+ writel(bits_per_char, uport->membase + SE_UART_RX_WORD_LEN);
+ writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN);
dev->con->write = qcom_geni_serial_earlycon_write;
dev->con->setup = NULL;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 9fc3559f80d9..83fd51607741 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1694,6 +1694,42 @@ s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
}
#endif
+static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
+{
+ struct device *dev = ourport->port.dev;
+ struct s3c24xx_uart_info *info = ourport->info;
+ char clk_name[MAX_CLK_NAME_LENGTH];
+ unsigned int clk_sel;
+ struct clk *clk;
+ int clk_num;
+ int ret;
+
+ clk_sel = ourport->cfg->clk_sel ? : info->def_clk_sel;
+ for (clk_num = 0; clk_num < info->num_clks; clk_num++) {
+ if (!(clk_sel & (1 << clk_num)))
+ continue;
+
+ sprintf(clk_name, "clk_uart_baud%d", clk_num);
+ clk = clk_get(dev, clk_name);
+ if (IS_ERR(clk))
+ continue;
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ clk_put(clk);
+ continue;
+ }
+
+ ourport->baudclk = clk;
+ ourport->baudclk_rate = clk_get_rate(clk);
+ s3c24xx_serial_setsource(&ourport->port, clk_num);
+
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
/* s3c24xx_serial_init_port
*
* initialise a single serial port from the platform device given
@@ -1788,6 +1824,10 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
goto err;
}
+ ret = s3c24xx_serial_enable_baudclk(ourport);
+ if (ret)
+ pr_warn("uart: failed to enable baudclk\n");
+
/* Keep all interrupts masked and cleared */
if (s3c24xx_serial_has_interrupt_mask(port)) {
wr_regl(port, S3C64XX_UINTM, 0xf);
@@ -1901,6 +1941,8 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
* and keeps the clock enabled in this case.
*/
clk_disable_unprepare(ourport->clk);
+ if (!IS_ERR(ourport->baudclk))
+ clk_disable_unprepare(ourport->baudclk);
ret = s3c24xx_serial_cpufreq_register(ourport);
if (ret < 0)
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 268098681856..635178cf3eed 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1187,9 +1187,7 @@ static int sc16is7xx_probe(struct device *dev,
return PTR_ERR(regmap);
/* Alloc port structure */
- s = devm_kzalloc(dev, sizeof(*s) +
- sizeof(struct sc16is7xx_one) * devtype->nr_uart,
- GFP_KERNEL);
+ s = devm_kzalloc(dev, struct_size(s, p, devtype->nr_uart), GFP_KERNEL);
if (!s) {
dev_err(dev, "Error allocating port structure\n");
return -ENOMEM;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 556f50aa1b58..351843f847c0 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2844,7 +2844,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
*/
tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver,
uport->line, uport->dev, port, uport->tty_groups);
- if (likely(!IS_ERR(tty_dev))) {
+ if (!IS_ERR(tty_dev)) {
device_set_wakeup_capable(tty_dev, 1);
} else {
dev_err(uport->dev, "Cannot register tty device on line %d\n",
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 64bbeb7d7e0c..060fcd42b6d5 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1243,12 +1243,22 @@ static int sci_dma_rx_find_active(struct sci_port *s)
return -1;
}
-static void sci_rx_dma_release(struct sci_port *s)
+static void sci_dma_rx_chan_invalidate(struct sci_port *s)
+{
+ unsigned int i;
+
+ s->chan_rx = NULL;
+ for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++)
+ s->cookie_rx[i] = -EINVAL;
+ s->active_rx = 0;
+}
+
+static void sci_dma_rx_release(struct sci_port *s)
{
struct dma_chan *chan = s->chan_rx_saved;
- s->chan_rx_saved = s->chan_rx = NULL;
- s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
+ s->chan_rx_saved = NULL;
+ sci_dma_rx_chan_invalidate(s);
dmaengine_terminate_sync(chan);
dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
sg_dma_address(&s->sg_rx[0]));
@@ -1264,6 +1274,20 @@ static void start_hrtimer_us(struct hrtimer *hrt, unsigned long usec)
hrtimer_start(hrt, t, HRTIMER_MODE_REL);
}
+static void sci_dma_rx_reenable_irq(struct sci_port *s)
+{
+ struct uart_port *port = &s->port;
+ u16 scr;
+
+ /* Direct new serial port interrupts back to CPU */
+ scr = serial_port_in(port, SCSCR);
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ scr &= ~SCSCR_RDRQE;
+ enable_irq(s->irqs[SCIx_RXI_IRQ]);
+ }
+ serial_port_out(port, SCSCR, scr | SCSCR_RIE);
+}
+
static void sci_dma_rx_complete(void *arg)
{
struct sci_port *s = arg;
@@ -1313,12 +1337,13 @@ fail:
dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
/* Switch to PIO */
spin_lock_irqsave(&port->lock, flags);
- s->chan_rx = NULL;
- sci_start_rx(port);
+ dmaengine_terminate_async(chan);
+ sci_dma_rx_chan_invalidate(s);
+ sci_dma_rx_reenable_irq(s);
spin_unlock_irqrestore(&port->lock, flags);
}
-static void sci_tx_dma_release(struct sci_port *s)
+static void sci_dma_tx_release(struct sci_port *s)
{
struct dma_chan *chan = s->chan_tx_saved;
@@ -1331,7 +1356,7 @@ static void sci_tx_dma_release(struct sci_port *s)
dma_release_channel(chan);
}
-static int sci_submit_rx(struct sci_port *s, bool port_lock_held)
+static int sci_dma_rx_submit(struct sci_port *s, bool port_lock_held)
{
struct dma_chan *chan = s->chan_rx;
struct uart_port *port = &s->port;
@@ -1367,17 +1392,14 @@ fail:
spin_lock_irqsave(&port->lock, flags);
if (i)
dmaengine_terminate_async(chan);
- for (i = 0; i < 2; i++)
- s->cookie_rx[i] = -EINVAL;
- s->active_rx = 0;
- s->chan_rx = NULL;
+ sci_dma_rx_chan_invalidate(s);
sci_start_rx(port);
if (!port_lock_held)
spin_unlock_irqrestore(&port->lock, flags);
return -EAGAIN;
}
-static void work_fn_tx(struct work_struct *work)
+static void sci_dma_tx_work_fn(struct work_struct *work)
{
struct sci_port *s = container_of(work, struct sci_port, work_tx);
struct dma_async_tx_descriptor *desc;
@@ -1436,7 +1458,7 @@ switch_to_pio:
return;
}
-static enum hrtimer_restart rx_timer_fn(struct hrtimer *t)
+static enum hrtimer_restart sci_dma_rx_timer_fn(struct hrtimer *t)
{
struct sci_port *s = container_of(t, struct sci_port, rx_timer);
struct dma_chan *chan = s->chan_rx;
@@ -1446,7 +1468,6 @@ static enum hrtimer_restart rx_timer_fn(struct hrtimer *t)
unsigned long flags;
unsigned int read;
int active, count;
- u16 scr;
dev_dbg(port->dev, "DMA Rx timed out\n");
@@ -1494,15 +1515,9 @@ static enum hrtimer_restart rx_timer_fn(struct hrtimer *t)
}
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- sci_submit_rx(s, true);
+ sci_dma_rx_submit(s, true);
- /* Direct new serial port interrupts back to CPU */
- scr = serial_port_in(port, SCSCR);
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- scr &= ~SCSCR_RDRQE;
- enable_irq(s->irqs[SCIx_RXI_IRQ]);
- }
- serial_port_out(port, SCSCR, scr | SCSCR_RIE);
+ sci_dma_rx_reenable_irq(s);
spin_unlock_irqrestore(&port->lock, flags);
@@ -1580,7 +1595,7 @@ static void sci_request_dma(struct uart_port *port)
__func__, UART_XMIT_SIZE,
port->state->xmit.buf, &s->tx_dma_addr);
- INIT_WORK(&s->work_tx, work_fn_tx);
+ INIT_WORK(&s->work_tx, sci_dma_tx_work_fn);
s->chan_tx_saved = s->chan_tx = chan;
}
}
@@ -1615,12 +1630,12 @@ static void sci_request_dma(struct uart_port *port)
}
hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- s->rx_timer.function = rx_timer_fn;
+ s->rx_timer.function = sci_dma_rx_timer_fn;
s->chan_rx_saved = s->chan_rx = chan;
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- sci_submit_rx(s, false);
+ sci_dma_rx_submit(s, false);
}
}
@@ -1629,9 +1644,9 @@ static void sci_free_dma(struct uart_port *port)
struct sci_port *s = to_sci_port(port);
if (s->chan_tx_saved)
- sci_tx_dma_release(s);
+ sci_dma_tx_release(s);
if (s->chan_rx_saved)
- sci_rx_dma_release(s);
+ sci_dma_rx_release(s);
}
static void sci_flush_buffer(struct uart_port *port)
@@ -1669,7 +1684,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
disable_irq_nosync(irq);
scr |= SCSCR_RDRQE;
} else {
- if (sci_submit_rx(s, false) < 0)
+ if (sci_dma_rx_submit(s, false) < 0)
goto handle_pio;
scr &= ~SCSCR_RIE;
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 4287ca305b6b..1891a45ac05d 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -371,7 +371,7 @@ static void sprd_set_termios(struct uart_port *port,
/* ask the core to calculate the divisor for us */
baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
- quot = (unsigned int)((port->uartclk + baud / 2) / baud);
+ quot = port->uartclk / baud;
/* set data length */
switch (termios->c_cflag & CSIZE) {
diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c
new file mode 100644
index 000000000000..aaf8748a6147
--- /dev/null
+++ b/drivers/tty/serial/tegra-tcu.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved.
+ */
+
+#include <linux/console.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#define TCU_MBOX_BYTE(i, x) ((x) << (i * 8))
+#define TCU_MBOX_BYTE_V(x, i) (((x) >> (i * 8)) & 0xff)
+#define TCU_MBOX_NUM_BYTES(x) ((x) << 24)
+#define TCU_MBOX_NUM_BYTES_V(x) (((x) >> 24) & 0x3)
+
+struct tegra_tcu {
+ struct uart_driver driver;
+#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE)
+ struct console console;
+#endif
+ struct uart_port port;
+
+ struct mbox_client tx_client, rx_client;
+ struct mbox_chan *tx, *rx;
+};
+
+static unsigned int tegra_tcu_uart_tx_empty(struct uart_port *port)
+{
+ return TIOCSER_TEMT;
+}
+
+static void tegra_tcu_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int tegra_tcu_uart_get_mctrl(struct uart_port *port)
+{
+ return 0;
+}
+
+static void tegra_tcu_uart_stop_tx(struct uart_port *port)
+{
+}
+
+static void tegra_tcu_write_one(struct tegra_tcu *tcu, u32 value,
+ unsigned int count)
+{
+ void *msg;
+
+ value |= TCU_MBOX_NUM_BYTES(count);
+ msg = (void *)(unsigned long)value;
+ mbox_send_message(tcu->tx, msg);
+ mbox_flush(tcu->tx, 1000);
+}
+
+static void tegra_tcu_write(struct tegra_tcu *tcu, const char *s,
+ unsigned int count)
+{
+ unsigned int written = 0, i = 0;
+ bool insert_nl = false;
+ u32 value = 0;
+
+ while (i < count) {
+ if (insert_nl) {
+ value |= TCU_MBOX_BYTE(written++, '\n');
+ insert_nl = false;
+ i++;
+ } else if (s[i] == '\n') {
+ value |= TCU_MBOX_BYTE(written++, '\r');
+ insert_nl = true;
+ } else {
+ value |= TCU_MBOX_BYTE(written++, s[i++]);
+ }
+
+ if (written == 3) {
+ tegra_tcu_write_one(tcu, value, 3);
+ value = written = 0;
+ }
+ }
+
+ if (written)
+ tegra_tcu_write_one(tcu, value, written);
+}
+
+static void tegra_tcu_uart_start_tx(struct uart_port *port)
+{
+ struct tegra_tcu *tcu = port->private_data;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned long count;
+
+ for (;;) {
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ if (!count)
+ break;
+
+ tegra_tcu_write(tcu, &xmit->buf[xmit->tail], count);
+ xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+ }
+
+ uart_write_wakeup(port);
+}
+
+static void tegra_tcu_uart_stop_rx(struct uart_port *port)
+{
+}
+
+static void tegra_tcu_uart_break_ctl(struct uart_port *port, int ctl)
+{
+}
+
+static int tegra_tcu_uart_startup(struct uart_port *port)
+{
+ return 0;
+}
+
+static void tegra_tcu_uart_shutdown(struct uart_port *port)
+{
+}
+
+static void tegra_tcu_uart_set_termios(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+}
+
+static const struct uart_ops tegra_tcu_uart_ops = {
+ .tx_empty = tegra_tcu_uart_tx_empty,
+ .set_mctrl = tegra_tcu_uart_set_mctrl,
+ .get_mctrl = tegra_tcu_uart_get_mctrl,
+ .stop_tx = tegra_tcu_uart_stop_tx,
+ .start_tx = tegra_tcu_uart_start_tx,
+ .stop_rx = tegra_tcu_uart_stop_rx,
+ .break_ctl = tegra_tcu_uart_break_ctl,
+ .startup = tegra_tcu_uart_startup,
+ .shutdown = tegra_tcu_uart_shutdown,
+ .set_termios = tegra_tcu_uart_set_termios,
+};
+
+#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE)
+static void tegra_tcu_console_write(struct console *cons, const char *s,
+ unsigned int count)
+{
+ struct tegra_tcu *tcu = container_of(cons, struct tegra_tcu, console);
+
+ tegra_tcu_write(tcu, s, count);
+}
+
+static int tegra_tcu_console_setup(struct console *cons, char *options)
+{
+ return 0;
+}
+#endif
+
+static void tegra_tcu_receive(struct mbox_client *cl, void *msg)
+{
+ struct tegra_tcu *tcu = container_of(cl, struct tegra_tcu, rx_client);
+ struct tty_port *port = &tcu->port.state->port;
+ u32 value = (u32)(unsigned long)msg;
+ unsigned int num_bytes, i;
+
+ num_bytes = TCU_MBOX_NUM_BYTES_V(value);
+
+ for (i = 0; i < num_bytes; i++)
+ tty_insert_flip_char(port, TCU_MBOX_BYTE_V(value, i),
+ TTY_NORMAL);
+
+ tty_flip_buffer_push(port);
+}
+
+static int tegra_tcu_probe(struct platform_device *pdev)
+{
+ struct uart_port *port;
+ struct tegra_tcu *tcu;
+ int err;
+
+ tcu = devm_kzalloc(&pdev->dev, sizeof(*tcu), GFP_KERNEL);
+ if (!tcu)
+ return -ENOMEM;
+
+ tcu->tx_client.dev = &pdev->dev;
+ tcu->rx_client.dev = &pdev->dev;
+ tcu->rx_client.rx_callback = tegra_tcu_receive;
+
+ tcu->tx = mbox_request_channel_byname(&tcu->tx_client, "tx");
+ if (IS_ERR(tcu->tx)) {
+ err = PTR_ERR(tcu->tx);
+ dev_err(&pdev->dev, "failed to get tx mailbox: %d\n", err);
+ return err;
+ }
+
+ tcu->rx = mbox_request_channel_byname(&tcu->rx_client, "rx");
+ if (IS_ERR(tcu->rx)) {
+ err = PTR_ERR(tcu->rx);
+ dev_err(&pdev->dev, "failed to get rx mailbox: %d\n", err);
+ goto free_tx;
+ }
+
+#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE)
+ /* setup the console */
+ strcpy(tcu->console.name, "ttyTCU");
+ tcu->console.device = uart_console_device;
+ tcu->console.flags = CON_PRINTBUFFER | CON_ANYTIME;
+ tcu->console.index = -1;
+ tcu->console.write = tegra_tcu_console_write;
+ tcu->console.setup = tegra_tcu_console_setup;
+ tcu->console.data = &tcu->driver;
+#endif
+
+ /* setup the driver */
+ tcu->driver.owner = THIS_MODULE;
+ tcu->driver.driver_name = "tegra-tcu";
+ tcu->driver.dev_name = "ttyTCU";
+#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE)
+ tcu->driver.cons = &tcu->console;
+#endif
+ tcu->driver.nr = 1;
+
+ err = uart_register_driver(&tcu->driver);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register UART driver: %d\n",
+ err);
+ goto free_rx;
+ }
+
+ /* setup the port */
+ port = &tcu->port;
+ spin_lock_init(&port->lock);
+ port->dev = &pdev->dev;
+ port->type = PORT_TEGRA_TCU;
+ port->ops = &tegra_tcu_uart_ops;
+ port->fifosize = 1;
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->private_data = tcu;
+
+ err = uart_add_one_port(&tcu->driver, port);
+ if (err) {
+ dev_err(&pdev->dev, "failed to add UART port: %d\n", err);
+ goto unregister_uart;
+ }
+
+ platform_set_drvdata(pdev, tcu);
+#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE)
+ register_console(&tcu->console);
+#endif
+
+ return 0;
+
+unregister_uart:
+ uart_unregister_driver(&tcu->driver);
+free_rx:
+ mbox_free_channel(tcu->rx);
+free_tx:
+ mbox_free_channel(tcu->tx);
+
+ return err;
+}
+
+static int tegra_tcu_remove(struct platform_device *pdev)
+{
+ struct tegra_tcu *tcu = platform_get_drvdata(pdev);
+
+#if IS_ENABLED(CONFIG_SERIAL_TEGRA_TCU_CONSOLE)
+ unregister_console(&tcu->console);
+#endif
+ uart_remove_one_port(&tcu->driver, &tcu->port);
+ uart_unregister_driver(&tcu->driver);
+ mbox_free_channel(tcu->rx);
+ mbox_free_channel(tcu->tx);
+
+ return 0;
+}
+
+static const struct of_device_id tegra_tcu_match[] = {
+ { .compatible = "nvidia,tegra194-tcu" },
+ { }
+};
+
+static struct platform_driver tegra_tcu_driver = {
+ .driver = {
+ .name = "tegra-tcu",
+ .of_match_table = tegra_tcu_match,
+ },
+ .probe = tegra_tcu_probe,
+ .remove = tegra_tcu_remove,
+};
+module_platform_driver(tegra_tcu_driver);
+
+MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("NVIDIA Tegra Combined UART driver");
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 094f2958cb2b..74089f5e5b53 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -364,7 +364,13 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
cdns_uart_handle_tx(dev_id);
isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
}
- if (isrstatus & CDNS_UART_IXR_RXMASK)
+
+ /*
+ * Skip RX processing if RX is disabled as RXEMPTY will never be set
+ * as read bytes will not be removed from the FIFO.
+ */
+ if (isrstatus & CDNS_UART_IXR_RXMASK &&
+ !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
cdns_uart_handle_rx(dev_id, isrstatus);
spin_unlock(&port->lock);
@@ -1547,27 +1553,33 @@ static int cdns_uart_probe(struct platform_device *pdev)
}
cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (PTR_ERR(cdns_uart_data->pclk) == -EPROBE_DEFER) {
+ rc = PTR_ERR(cdns_uart_data->pclk);
+ goto err_out_unregister_driver;
+ }
+
if (IS_ERR(cdns_uart_data->pclk)) {
cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk");
- if (!IS_ERR(cdns_uart_data->pclk))
- dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
+ if (IS_ERR(cdns_uart_data->pclk)) {
+ rc = PTR_ERR(cdns_uart_data->pclk);
+ goto err_out_unregister_driver;
+ }
+ dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
}
- if (IS_ERR(cdns_uart_data->pclk)) {
- dev_err(&pdev->dev, "pclk clock not found.\n");
- rc = PTR_ERR(cdns_uart_data->pclk);
+
+ cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
+ if (PTR_ERR(cdns_uart_data->uartclk) == -EPROBE_DEFER) {
+ rc = PTR_ERR(cdns_uart_data->uartclk);
goto err_out_unregister_driver;
}
- cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
if (IS_ERR(cdns_uart_data->uartclk)) {
cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk");
- if (!IS_ERR(cdns_uart_data->uartclk))
- dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
- }
- if (IS_ERR(cdns_uart_data->uartclk)) {
- dev_err(&pdev->dev, "uart_clk clock not found.\n");
- rc = PTR_ERR(cdns_uart_data->uartclk);
- goto err_out_unregister_driver;
+ if (IS_ERR(cdns_uart_data->uartclk)) {
+ rc = PTR_ERR(cdns_uart_data->uartclk);
+ goto err_out_unregister_driver;
+ }
+ dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
}
rc = clk_prepare_enable(cdns_uart_data->pclk);
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index d55c858d6058..84f26e43b229 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -4325,41 +4325,6 @@ static int mgsl_init_tty(void)
return 0;
}
-/* enumerate user specified ISA adapters
- */
-static void mgsl_enum_isa_devices(void)
-{
- struct mgsl_struct *info;
- int i;
-
- /* Check for user specified ISA devices */
-
- for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
- if ( debug_level >= DEBUG_LEVEL_INFO )
- printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
- io[i], irq[i], dma[i] );
-
- info = mgsl_allocate_device();
- if ( !info ) {
- /* error allocating device instance data */
- if ( debug_level >= DEBUG_LEVEL_ERROR )
- printk( "can't allocate device instance data.\n");
- continue;
- }
-
- /* Copy user configuration info to device instance data */
- info->io_base = (unsigned int)io[i];
- info->irq_level = (unsigned int)irq[i];
- info->irq_level = irq_canonicalize(info->irq_level);
- info->dma_level = (unsigned int)dma[i];
- info->bus_type = MGSL_BUS_TYPE_ISA;
- info->io_addr_size = 16;
- info->irq_flags = 0;
-
- mgsl_add_device( info );
- }
-}
-
static void synclink_cleanup(void)
{
int rc;
@@ -4403,7 +4368,6 @@ static int __init synclink_init(void)
printk("%s %s\n", driver_name, driver_version);
- mgsl_enum_isa_devices();
if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
else
@@ -5025,12 +4989,6 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
info->mbre_bit = BIT8;
outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */
- if (info->bus_type == MGSL_BUS_TYPE_ISA) {
- /* Enable DMAEN (Port 7, Bit 14) */
- /* This connects the DMA request signal to the ISA bus */
- usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
- }
-
/* DMA Control Register (DCR)
*
* <15..14> 10 Priority mode = Alternating Tx/Rx
@@ -6007,12 +5965,6 @@ static void usc_set_async_mode( struct mgsl_struct *info )
usc_EnableMasterIrqBit( info );
- if (info->bus_type == MGSL_BUS_TYPE_ISA) {
- /* Enable INTEN (Port 6, Bit12) */
- /* This connects the IRQ request signal to the ISA bus */
- usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
- }
-
if (info->params.loopback) {
info->loopback_bits = 0x300;
outw(0x0300, info->io_base + CCAR);
@@ -6107,12 +6059,6 @@ static void usc_set_sync_mode( struct mgsl_struct *info )
usc_loopback_frame( info );
usc_set_sdlc_mode( info );
- if (info->bus_type == MGSL_BUS_TYPE_ISA) {
- /* Enable INTEN (Port 6, Bit12) */
- /* This connects the IRQ request signal to the ISA bus */
- usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
- }
-
usc_enable_aux_clock(info, info->params.clock_speed);
if (info->params.loopback)
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 1f03078ec352..fa0ce7dd9e24 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -539,7 +539,6 @@ void __handle_sysrq(int key, bool check_mask)
*/
orig_log_level = console_loglevel;
console_loglevel = CONSOLE_LOGLEVEL_DEFAULT;
- pr_info("SysRq : ");
op_p = __sysrq_get_key_op(key);
if (op_p) {
@@ -548,14 +547,15 @@ void __handle_sysrq(int key, bool check_mask)
* should not) and is the invoked operation enabled?
*/
if (!check_mask || sysrq_on_mask(op_p->enable_mask)) {
- pr_cont("%s\n", op_p->action_msg);
+ pr_info("%s\n", op_p->action_msg);
console_loglevel = orig_log_level;
op_p->handler(key);
} else {
- pr_cont("This sysrq operation is disabled.\n");
+ pr_info("This sysrq operation is disabled.\n");
+ console_loglevel = orig_log_level;
}
} else {
- pr_cont("HELP : ");
+ pr_info("HELP : ");
/* Only print the help msg once per handler */
for (i = 0; i < ARRAY_SIZE(sysrq_key_table); i++) {
if (sysrq_key_table[i]) {
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 77070c2d1240..ec145a59f199 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -26,7 +26,7 @@
* Byte threshold to limit memory consumption for flip buffers.
* The actual memory limit is > 2x this amount.
*/
-#define TTYB_DEFAULT_MEM_LIMIT 65536
+#define TTYB_DEFAULT_MEM_LIMIT (640 * 1024UL)
/*
* We default to dicing tty buffer allocations to this many characters
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 21ffcce16927..5fa250157025 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -513,6 +513,8 @@ static const struct file_operations hung_up_tty_fops = {
static DEFINE_SPINLOCK(redirect_lock);
static struct file *redirect;
+extern void tty_sysctl_init(void);
+
/**
* tty_wakeup - request more data
* @tty: terminal
@@ -3483,6 +3485,7 @@ void console_sysfs_notify(void)
*/
int __init tty_init(void)
{
+ tty_sysctl_init();
cdev_init(&tty_cdev, &tty_fops);
if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 45eda69b150c..e38f104db174 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -156,6 +156,13 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
* takes tty_ldiscs_lock to guard against ldisc races
*/
+#if defined(CONFIG_LDISC_AUTOLOAD)
+ #define INITIAL_AUTOLOAD_STATE 1
+#else
+ #define INITIAL_AUTOLOAD_STATE 0
+#endif
+static int tty_ldisc_autoload = INITIAL_AUTOLOAD_STATE;
+
static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
{
struct tty_ldisc *ld;
@@ -170,6 +177,8 @@ static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
*/
ldops = get_ldops(disc);
if (IS_ERR(ldops)) {
+ if (!capable(CAP_SYS_MODULE) && !tty_ldisc_autoload)
+ return ERR_PTR(-EPERM);
request_module("tty-ldisc-%d", disc);
ldops = get_ldops(disc);
if (IS_ERR(ldops))
@@ -845,3 +854,41 @@ void tty_ldisc_deinit(struct tty_struct *tty)
tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
}
+
+static int zero;
+static int one = 1;
+static struct ctl_table tty_table[] = {
+ {
+ .procname = "ldisc_autoload",
+ .data = &tty_ldisc_autoload,
+ .maxlen = sizeof(tty_ldisc_autoload),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ .extra1 = &zero,
+ .extra2 = &one,
+ },
+ { }
+};
+
+static struct ctl_table tty_dir_table[] = {
+ {
+ .procname = "tty",
+ .mode = 0555,
+ .child = tty_table,
+ },
+ { }
+};
+
+static struct ctl_table tty_root_table[] = {
+ {
+ .procname = "dev",
+ .mode = 0555,
+ .child = tty_dir_table,
+ },
+ { }
+};
+
+void tty_sysctl_init(void)
+{
+ register_sysctl_table(tty_root_table);
+}
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index 2384ea85ffaf..160f46115aaa 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -80,7 +80,7 @@
struct vcs_poll_data {
struct notifier_block notifier;
unsigned int cons_num;
- bool seen_last_update;
+ int event;
wait_queue_head_t waitq;
struct fasync_struct *fasync;
};
@@ -93,9 +93,18 @@ vcs_notifier(struct notifier_block *nb, unsigned long code, void *_param)
struct vcs_poll_data *poll =
container_of(nb, struct vcs_poll_data, notifier);
int currcons = poll->cons_num;
-
- if (code != VT_UPDATE)
+ int fa_band;
+
+ switch (code) {
+ case VT_UPDATE:
+ fa_band = POLL_PRI;
+ break;
+ case VT_DEALLOCATE:
+ fa_band = POLL_HUP;
+ break;
+ default:
return NOTIFY_DONE;
+ }
if (currcons == 0)
currcons = fg_console;
@@ -104,9 +113,9 @@ vcs_notifier(struct notifier_block *nb, unsigned long code, void *_param)
if (currcons != vc->vc_num)
return NOTIFY_DONE;
- poll->seen_last_update = false;
+ poll->event = code;
wake_up_interruptible(&poll->waitq);
- kill_fasync(&poll->fasync, SIGIO, POLL_IN);
+ kill_fasync(&poll->fasync, SIGIO, fa_band);
return NOTIFY_OK;
}
@@ -131,6 +140,15 @@ vcs_poll_data_get(struct file *file)
poll->cons_num = console(file_inode(file));
init_waitqueue_head(&poll->waitq);
poll->notifier.notifier_call = vcs_notifier;
+ /*
+ * In order not to lose any update event, we must pretend one might
+ * have occurred before we have a chance to register our notifier.
+ * This is also how user space has come to detect which kernels
+ * support POLLPRI on /dev/vcs* devices i.e. using poll() with
+ * POLLPRI and a zero timeout.
+ */
+ poll->event = VT_UPDATE;
+
if (register_vt_notifier(&poll->notifier) != 0) {
kfree(poll);
return NULL;
@@ -261,7 +279,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
poll = file->private_data;
if (count && poll)
- poll->seen_last_update = true;
+ poll->event = 0;
read = 0;
ret = 0;
while (count) {
@@ -335,8 +353,9 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
if (p < HEADER_SIZE) {
size_t tmp_count;
- con_buf0[0] = (char)vc->vc_rows;
- con_buf0[1] = (char)vc->vc_cols;
+ /* clamp header values if they don't fit */
+ con_buf0[0] = min(vc->vc_rows, 0xFFu);
+ con_buf0[1] = min(vc->vc_cols, 0xFFu);
getconsxy(vc, con_buf0 + 2);
con_buf_start += p;
@@ -615,12 +634,21 @@ static __poll_t
vcs_poll(struct file *file, poll_table *wait)
{
struct vcs_poll_data *poll = vcs_poll_data_get(file);
- __poll_t ret = DEFAULT_POLLMASK|EPOLLERR|EPOLLPRI;
+ __poll_t ret = DEFAULT_POLLMASK|EPOLLERR;
if (poll) {
poll_wait(file, &poll->waitq, wait);
- if (poll->seen_last_update)
+ switch (poll->event) {
+ case VT_UPDATE:
+ ret = DEFAULT_POLLMASK|EPOLLPRI;
+ break;
+ case VT_DEALLOCATE:
+ ret = DEFAULT_POLLMASK|EPOLLHUP|EPOLLERR;
+ break;
+ case 0:
ret = DEFAULT_POLLMASK;
+ break;
+ }
}
return ret;
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index bba75560d11e..d34984aa646d 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -935,8 +935,11 @@ static void flush_scrollback(struct vc_data *vc)
{
WARN_CONSOLE_UNLOCKED();
+ set_origin(vc);
if (vc->vc_sw->con_flush_scrollback)
vc->vc_sw->con_flush_scrollback(vc);
+ else
+ vc->vc_sw->con_switch(vc);
}
/*
@@ -1342,6 +1345,8 @@ struct vc_data *vc_deallocate(unsigned int currcons)
* VT102 emulator
*/
+enum { EPecma = 0, EPdec, EPeq, EPgt, EPlt};
+
#define set_kbd(vc, x) vt_set_kbd_mode_bit((vc)->vc_num, (x))
#define clr_kbd(vc, x) vt_clr_kbd_mode_bit((vc)->vc_num, (x))
#define is_kbd(vc, x) vt_get_kbd_mode_bit((vc)->vc_num, (x))
@@ -1503,8 +1508,10 @@ static void csi_J(struct vc_data *vc, int vpar)
count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
start = (unsigned short *)vc->vc_origin;
break;
+ case 3: /* include scrollback */
+ flush_scrollback(vc);
+ /* fallthrough */
case 2: /* erase whole display */
- case 3: /* (and scrollback buffer later) */
vc_uniscr_clear_lines(vc, 0, vc->vc_rows);
count = vc->vc_cols * vc->vc_rows;
start = (unsigned short *)vc->vc_origin;
@@ -1513,13 +1520,7 @@ static void csi_J(struct vc_data *vc, int vpar)
return;
}
scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
- if (vpar == 3) {
- set_origin(vc);
- flush_scrollback(vc);
- if (con_is_visible(vc))
- update_screen(vc);
- } else if (con_should_update(vc))
- do_update_region(vc, (unsigned long) start, count);
+ update_region(vc, (unsigned long) start, count);
vc->vc_need_wrap = 0;
}
@@ -1628,9 +1629,9 @@ static void rgb_background(struct vc_data *vc, const struct rgb *c)
/*
* ITU T.416 Higher colour modes. They break the usual properties of SGR codes
- * and thus need to be detected and ignored by hand. Strictly speaking, that
- * standard also wants : rather than ; as separators, contrary to ECMA-48, but
- * no one produces such codes and almost no one accepts them.
+ * and thus need to be detected and ignored by hand. That standard also
+ * wants : rather than ; as separators but sequences containing : are currently
+ * completely ignored by the parser.
*
* Subcommands 3 (CMY) and 4 (CMYK) are so insane there's no point in
* supporting them.
@@ -1815,7 +1816,7 @@ static void set_mode(struct vc_data *vc, int on_off)
int i;
for (i = 0; i <= vc->vc_npar; i++)
- if (vc->vc_ques) {
+ if (vc->vc_priv == EPdec) {
switch(vc->vc_par[i]) { /* DEC private modes set/reset */
case 1: /* Cursor keys send ^[Ox/^[[x */
if (on_off)
@@ -2022,7 +2023,7 @@ static void restore_cur(struct vc_data *vc)
}
enum { ESnormal, ESesc, ESsquare, ESgetpars, ESfunckey,
- EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd,
+ EShash, ESsetG0, ESsetG1, ESpercent, EScsiignore, ESnonstd,
ESpalette, ESosc };
/* console_lock is held (except via vc_init()) */
@@ -2031,7 +2032,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear)
vc->vc_top = 0;
vc->vc_bottom = vc->vc_rows;
vc->vc_state = ESnormal;
- vc->vc_ques = 0;
+ vc->vc_priv = EPecma;
vc->vc_translate = set_translate(LAT1_MAP, vc);
vc->vc_G0_charset = LAT1_MAP;
vc->vc_G1_charset = GRAF_MAP;
@@ -2112,6 +2113,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
lf(vc);
if (!is_kbd(vc, lnm))
return;
+ /* fall through */
case 13:
cr(vc);
return;
@@ -2234,9 +2236,22 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
vc->vc_state=ESfunckey;
return;
}
- vc->vc_ques = (c == '?');
- if (vc->vc_ques)
+ switch (c) {
+ case '?':
+ vc->vc_priv = EPdec;
+ return;
+ case '>':
+ vc->vc_priv = EPgt;
+ return;
+ case '=':
+ vc->vc_priv = EPeq;
return;
+ case '<':
+ vc->vc_priv = EPlt;
+ return;
+ }
+ vc->vc_priv = EPecma;
+ /* fall through */
case ESgetpars:
if (c == ';' && vc->vc_npar < NPAR - 1) {
vc->vc_npar++;
@@ -2246,16 +2261,22 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
vc->vc_par[vc->vc_npar] += c - '0';
return;
}
+ if (c >= 0x20 && c <= 0x3f) { /* 0x2x, 0x3a and 0x3c - 0x3f */
+ vc->vc_state = EScsiignore;
+ return;
+ }
vc->vc_state = ESnormal;
switch(c) {
case 'h':
- set_mode(vc, 1);
+ if (vc->vc_priv <= EPdec)
+ set_mode(vc, 1);
return;
case 'l':
- set_mode(vc, 0);
+ if (vc->vc_priv <= EPdec)
+ set_mode(vc, 0);
return;
case 'c':
- if (vc->vc_ques) {
+ if (vc->vc_priv == EPdec) {
if (vc->vc_par[0])
vc->vc_cursor_type = vc->vc_par[0] | (vc->vc_par[1] << 8) | (vc->vc_par[2] << 16);
else
@@ -2264,7 +2285,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
}
break;
case 'm':
- if (vc->vc_ques) {
+ if (vc->vc_priv == EPdec) {
clear_selection();
if (vc->vc_par[0])
vc->vc_complement_mask = vc->vc_par[0] << 8 | vc->vc_par[1];
@@ -2274,7 +2295,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
}
break;
case 'n':
- if (!vc->vc_ques) {
+ if (vc->vc_priv == EPecma) {
if (vc->vc_par[0] == 5)
status_report(tty);
else if (vc->vc_par[0] == 6)
@@ -2282,8 +2303,8 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
}
return;
}
- if (vc->vc_ques) {
- vc->vc_ques = 0;
+ if (vc->vc_priv != EPecma) {
+ vc->vc_priv = EPecma;
return;
}
switch(c) {
@@ -2406,6 +2427,11 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
return;
}
return;
+ case EScsiignore:
+ if (c >= 20 && c <= 0x3f)
+ return;
+ vc->vc_state = ESnormal;
+ return;
case ESpercent:
vc->vc_state = ESnormal;
switch (c) {
@@ -4591,8 +4617,9 @@ EXPORT_SYMBOL_GPL(screen_pos);
void getconsxy(struct vc_data *vc, unsigned char *p)
{
- p[0] = vc->vc_x;
- p[1] = vc->vc_y;
+ /* clamp values if they don't fit */
+ p[0] = min(vc->vc_x, 0xFFu);
+ p[1] = min(vc->vc_y, 0xFFu);
}
void putconsxy(struct vc_data *vc, unsigned char *p)
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index ab137f97ecbd..ed798e114663 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -119,7 +119,7 @@ struct vc_data {
unsigned int vc_s_blink : 1;
unsigned int vc_s_reverse : 1;
/* misc */
- unsigned int vc_ques : 1;
+ unsigned int vc_priv : 3;
unsigned int vc_need_wrap : 1;
unsigned int vc_can_do_color : 1;
unsigned int vc_report_mouse : 2;
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index df4a7534e239..6009ee2c2e99 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -79,6 +79,9 @@
/* Nuvoton UART */
#define PORT_NPCM 40
+/* NVIDIA Tegra Combined UART */
+#define PORT_TEGRA_TCU 41
+
/* Intel EG20 */
#define PORT_PCH_8LINE 44
#define PORT_PCH_2LINE 45