summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/mmc/host/Kconfig16
-rw-r--r--drivers/mmc/host/atmel-mci.c33
2 files changed, 42 insertions, 7 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 34fdfa968fe9..6f20eb93554b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -160,6 +160,12 @@ config MMC_AU1X
If unsure, say N.
+choice
+ prompt "Atmel SD/MMC Driver"
+ default MMC_ATMELMCI if AVR32
+ help
+ Choose which driver to use for the Atmel MCI Silicon
+
config MMC_AT91
tristate "AT91 SD/MMC Card Interface support"
depends on ARCH_AT91
@@ -170,17 +176,19 @@ config MMC_AT91
config MMC_ATMELMCI
tristate "Atmel Multimedia Card Interface support"
- depends on AVR32
+ depends on AVR32 || ARCH_AT91
help
This selects the Atmel Multimedia Card Interface driver. If
- you have an AT32 (AVR32) platform with a Multimedia Card
- slot, say Y or M here.
+ you have an AT32 (AVR32) or AT91 platform with a Multimedia
+ Card slot, say Y or M here.
If unsure, say N.
+endchoice
+
config MMC_ATMELMCI_DMA
bool "Atmel MCI DMA support (EXPERIMENTAL)"
- depends on MMC_ATMELMCI && DMA_ENGINE && EXPERIMENTAL
+ depends on MMC_ATMELMCI && AVR32 && DMA_ENGINE && EXPERIMENTAL
help
Say Y here to have the Atmel MCI driver use a DMA engine to
do data transfers and thus increase the throughput and
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 7b603e4b41db..065fa818be57 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -30,6 +30,7 @@
#include <asm/io.h>
#include <asm/unaligned.h>
+#include <mach/cpu.h>
#include <mach/board.h>
#include "atmel-mci-regs.h"
@@ -210,6 +211,18 @@ struct atmel_mci_slot {
set_bit(event, &host->pending_events)
/*
+ * Enable or disable features/registers based on
+ * whether the processor supports them
+ */
+static bool mci_has_rwproof(void)
+{
+ if (cpu_is_at91sam9261() || cpu_is_at91rm9200())
+ return false;
+ else
+ return true;
+}
+
+/*
* The debugfs stuff below is mostly optimized away when
* CONFIG_DEBUG_FS is not set.
*/
@@ -276,8 +289,13 @@ static void atmci_show_status_reg(struct seq_file *s,
[3] = "BLKE",
[4] = "DTIP",
[5] = "NOTBUSY",
+ [6] = "ENDRX",
+ [7] = "ENDTX",
[8] = "SDIOIRQA",
[9] = "SDIOIRQB",
+ [12] = "SDIOWAIT",
+ [14] = "RXBUFF",
+ [15] = "TXBUFE",
[16] = "RINDE",
[17] = "RDIRE",
[18] = "RCRCE",
@@ -285,6 +303,11 @@ static void atmci_show_status_reg(struct seq_file *s,
[20] = "RTOE",
[21] = "DCRCE",
[22] = "DTOE",
+ [23] = "CSTOE",
+ [24] = "BLKOVRE",
+ [25] = "DMADONE",
+ [26] = "FIFOEMPTY",
+ [27] = "XFRDONE",
[30] = "OVRE",
[31] = "UNRE",
};
@@ -849,13 +872,15 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
clkdiv = 255;
}
+ host->mode_reg = MCI_MR_CLKDIV(clkdiv);
+
/*
* WRPROOF and RDPROOF prevent overruns/underruns by
* stopping the clock when the FIFO is full/empty.
* This state is not expected to last for long.
*/
- host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
- | MCI_MR_RDPROOF;
+ if (mci_has_rwproof())
+ host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF);
if (list_empty(&host->queue))
mci_writel(host, MR, host->mode_reg);
@@ -1648,8 +1673,10 @@ static int __init atmci_probe(struct platform_device *pdev)
nr_slots++;
}
- if (!nr_slots)
+ if (!nr_slots) {
+ dev_err(&pdev->dev, "init failed: no slot defined\n");
goto err_init_slot;
+ }
dev_info(&pdev->dev,
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",