diff options
| -rw-r--r-- | arch/mips/dec/time.c | 4 | ||||
| -rw-r--r-- | arch/mips/jmr3927/rbhma3100/setup.c | 4 | ||||
| -rw-r--r-- | arch/mips/kernel/time.c | 42 | ||||
| -rw-r--r-- | arch/mips/sgi-ip27/ip27-timer.c | 4 | ||||
| -rw-r--r-- | arch/mips/sibyte/bcm1480/time.c | 4 | ||||
| -rw-r--r-- | arch/mips/sibyte/sb1250/time.c | 8 | ||||
| -rw-r--r-- | include/asm-mips/time.h | 8 |
7 files changed, 32 insertions, 42 deletions
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 69e424e9ab6f..8b7e0c17ac35 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -151,7 +151,7 @@ static void dec_timer_ack(void) CMOS_READ(RTC_REG_C); /* Ack the RTC interrupt. */ } -static unsigned int dec_ioasic_hpt_read(void) +static cycle_t dec_ioasic_hpt_read(void) { /* * The free-running counter is 32-bit which is good for about @@ -171,7 +171,7 @@ void __init dec_time_init(void) if (!cpu_has_counter && IOASIC) /* For pre-R4k systems we use the I/O ASIC's counter. */ - mips_hpt_read = dec_ioasic_hpt_read; + clocksource_mips.read = dec_ioasic_hpt_read; /* Set up the rate of periodic DS1287 interrupts. */ CMOS_WRITE(RTC_REF_CLCK_32KHZ | (16 - __ffs(HZ)), RTC_REG_A); diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 16e5dfe7aa8a..138f25efe38a 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -170,7 +170,7 @@ static void jmr3927_machine_power_off(void) while (1); } -static unsigned int jmr3927_hpt_read(void) +static cycle_t jmr3927_hpt_read(void) { /* We assume this function is called xtime_lock held. */ return jiffies * (JMR3927_TIMER_CLK / HZ) + jmr3927_tmrptr->trr; @@ -182,7 +182,7 @@ extern void rtc_ds1742_init(unsigned long base); #endif static void __init jmr3927_time_init(void) { - mips_hpt_read = jmr3927_hpt_read; + clocksource_mips.read = jmr3927_hpt_read; mips_hpt_frequency = JMR3927_TIMER_CLK; #ifdef USE_RTC_DS1742 if (jmr3927_have_nvram()) { diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 111d1baa3b22..11aab6d6bfe5 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -11,7 +11,6 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include <linux/clocksource.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/init.h> @@ -83,7 +82,7 @@ static void null_timer_ack(void) { /* nothing */ } /* * Null high precision timer functions for systems lacking one. */ -static unsigned int null_hpt_read(void) +static cycle_t null_hpt_read(void) { return 0; } @@ -112,7 +111,7 @@ static void c0_timer_ack(void) /* * High precision timer functions for a R4k-compatible timer. */ -static unsigned int c0_hpt_read(void) +static cycle_t c0_hpt_read(void) { return read_c0_count(); } @@ -126,8 +125,6 @@ static void __init c0_hpt_timer_init(void) int (*mips_timer_state)(void); void (*mips_timer_ack)(void); -unsigned int (*mips_hpt_read)(void); -unsigned int mips_hpt_mask = 0xffffffff; /* last time when xtime and rtc are sync'ed up */ static long last_rtc_update; @@ -269,8 +266,7 @@ static struct irqaction timer_irqaction = { static unsigned int __init calibrate_hpt(void) { - u64 frequency; - u32 hpt_start, hpt_end, hpt_count, hz; + cycle_t frequency, hpt_start, hpt_end, hpt_count, hz; const int loops = HZ / 10; int log_2_loops = 0; @@ -296,28 +292,23 @@ static unsigned int __init calibrate_hpt(void) * during the calculated number of periods between timer * interrupts. */ - hpt_start = mips_hpt_read(); + hpt_start = clocksource_mips.read(); do { while (mips_timer_state()); while (!mips_timer_state()); } while (--i); - hpt_end = mips_hpt_read(); + hpt_end = clocksource_mips.read(); - hpt_count = (hpt_end - hpt_start) & mips_hpt_mask; + hpt_count = (hpt_end - hpt_start) & clocksource_mips.mask; hz = HZ; - frequency = (u64)hpt_count * (u64)hz; + frequency = hpt_count * hz; return frequency >> log_2_loops; } -static cycle_t read_mips_hpt(void) -{ - return (cycle_t)mips_hpt_read(); -} - -static struct clocksource clocksource_mips = { +struct clocksource clocksource_mips = { .name = "MIPS", - .read = read_mips_hpt, + .mask = 0xffffffff, .is_continuous = 1, }; @@ -326,7 +317,7 @@ static void __init init_mips_clocksource(void) u64 temp; u32 shift; - if (!mips_hpt_frequency || mips_hpt_read == null_hpt_read) + if (!mips_hpt_frequency || clocksource_mips.read == null_hpt_read) return; /* Calclate a somewhat reasonable rating value */ @@ -340,7 +331,6 @@ static void __init init_mips_clocksource(void) } clocksource_mips.shift = shift; clocksource_mips.mult = (u32)temp; - clocksource_mips.mask = mips_hpt_mask; clocksource_register(&clocksource_mips); } @@ -360,19 +350,19 @@ void __init time_init(void) -xtime.tv_sec, -xtime.tv_nsec); /* Choose appropriate high precision timer routines. */ - if (!cpu_has_counter && !mips_hpt_read) + if (!cpu_has_counter && !clocksource_mips.read) /* No high precision timer -- sorry. */ - mips_hpt_read = null_hpt_read; + clocksource_mips.read = null_hpt_read; else if (!mips_hpt_frequency && !mips_timer_state) { /* A high precision timer of unknown frequency. */ - if (!mips_hpt_read) + if (!clocksource_mips.read) /* No external high precision timer -- use R4k. */ - mips_hpt_read = c0_hpt_read; + clocksource_mips.read = c0_hpt_read; } else { /* We know counter frequency. Or we can get it. */ - if (!mips_hpt_read) { + if (!clocksource_mips.read) { /* No external high precision timer -- use R4k. */ - mips_hpt_read = c0_hpt_read; + clocksource_mips.read = c0_hpt_read; if (!mips_timer_state) { /* No external timer interrupt -- use R4k. */ diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index e5441c3a0b07..7d361726bbfb 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -223,14 +223,14 @@ void __init plat_timer_setup(struct irqaction *irq) setup_irq(irqno, &rt_irqaction); } -static unsigned int ip27_hpt_read(void) +static cycle_t ip27_hpt_read(void) { return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT); } void __init ip27_time_init(void) { - mips_hpt_read = ip27_hpt_read; + clocksource_mips.read = ip27_hpt_read; mips_hpt_frequency = CYCLES_PER_SEC; xtime.tv_sec = get_m48t35_time(); xtime.tv_nsec = 0; diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c index 03d5822d3a73..6f3f71bf4244 100644 --- a/arch/mips/sibyte/bcm1480/time.c +++ b/arch/mips/sibyte/bcm1480/time.c @@ -117,7 +117,7 @@ void bcm1480_timer_interrupt(void) } } -static unsigned int bcm1480_hpt_read(void) +static cycle_t bcm1480_hpt_read(void) { /* We assume this function is called xtime_lock held. */ unsigned long count = @@ -127,6 +127,6 @@ static unsigned int bcm1480_hpt_read(void) void __init bcm1480_hpt_setup(void) { - mips_hpt_read = bcm1480_hpt_read; + clocksource_mips.read = bcm1480_hpt_read; mips_hpt_frequency = BCM1480_HPT_VALUE; } diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index bcb74f2c1948..2efffe15ff23 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -51,7 +51,7 @@ extern int sb1250_steal_irq(int irq); -static unsigned int sb1250_hpt_read(void); +static cycle_t sb1250_hpt_read(void); void __init sb1250_hpt_setup(void) { @@ -66,8 +66,8 @@ void __init sb1250_hpt_setup(void) IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); mips_hpt_frequency = V_SCD_TIMER_FREQ; - mips_hpt_read = sb1250_hpt_read; - mips_hpt_mask = M_SCD_TIMER_INIT; + clocksource_mips.read = sb1250_hpt_read; + clocksource_mips.mask = M_SCD_TIMER_INIT; } } @@ -143,7 +143,7 @@ void sb1250_timer_interrupt(void) * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over * again. */ -static unsigned int sb1250_hpt_read(void) +static cycle_t sb1250_hpt_read(void) { unsigned int count; diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h index b58665efb1d7..a632cef830a2 100644 --- a/include/asm-mips/time.h +++ b/include/asm-mips/time.h @@ -21,6 +21,7 @@ #include <linux/ptrace.h> #include <linux/rtc.h> #include <linux/spinlock.h> +#include <linux/clocksource.h> extern spinlock_t rtc_lock; @@ -44,11 +45,10 @@ extern int (*mips_timer_state)(void); extern void (*mips_timer_ack)(void); /* - * High precision timer functions. - * If mips_hpt_read is NULL, an R4k-compatible timer setup is attempted. + * High precision timer clocksource. + * If .read is NULL, an R4k-compatible timer setup is attempted. */ -extern unsigned int (*mips_hpt_read)(void); -extern unsigned int mips_hpt_mask; +extern struct clocksource clocksource_mips; /* * to_tm() converts system time back to (year, mon, day, hour, min, sec). |