diff options
| -rw-r--r-- | drivers/gpu/drm/i915/intel_guc_fwif.h | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_guc_fwif.h b/drivers/gpu/drm/i915/intel_guc_fwif.h index e40db2d2ae99..adb1ffdc37c2 100644 --- a/drivers/gpu/drm/i915/intel_guc_fwif.h +++ b/drivers/gpu/drm/i915/intel_guc_fwif.h @@ -419,15 +419,87 @@ struct guc_ads { u32 reserved2[4]; } __packed; +/* GuC logging structures */ + +enum guc_log_buffer_type { + GUC_ISR_LOG_BUFFER, + GUC_DPC_LOG_BUFFER, + GUC_CRASH_DUMP_LOG_BUFFER, + GUC_MAX_LOG_BUFFER +}; + +/** + * DOC: GuC Log buffer Layout + * + * Page0 +-------------------------------+ + * | ISR state header (32 bytes) | + * | DPC state header | + * | Crash dump state header | + * Page1 +-------------------------------+ + * | ISR logs | + * Page5 +-------------------------------+ + * | DPC logs | + * Page9 +-------------------------------+ + * | Crash Dump logs | + * +-------------------------------+ + * + * Below state structure is used for coordination of retrieval of GuC firmware + * logs. Separate state is maintained for each log buffer type. + * read_ptr points to the location where i915 read last in log buffer and + * is read only for GuC firmware. write_ptr is incremented by GuC with number + * of bytes written for each log entry and is read only for i915. + * When any type of log buffer becomes half full, GuC sends a flush interrupt. + * GuC firmware expects that while it is writing to 2nd half of the buffer, + * first half would get consumed by Host and then get a flush completed + * acknowledgment from Host, so that it does not end up doing any overwrite + * causing loss of logs. So when buffer gets half filled & i915 has requested + * for interrupt, GuC will set flush_to_file field, set the sampled_write_ptr + * to the value of write_ptr and raise the interrupt. + * On receiving the interrupt i915 should read the buffer, clear flush_to_file + * field and also update read_ptr with the value of sample_write_ptr, before + * sending an acknowledgment to GuC. marker & version fields are for internal + * usage of GuC and opaque to i915. buffer_full_cnt field is incremented every + * time GuC detects the log buffer overflow. + */ +struct guc_log_buffer_state { + u32 marker[2]; + u32 read_ptr; + u32 write_ptr; + u32 size; + u32 sampled_write_ptr; + union { + struct { + u32 flush_to_file:1; + u32 buffer_full_cnt:4; + u32 reserved:27; + }; + u32 flags; + }; + u32 version; +} __packed; + +union guc_log_control { + struct { + u32 logging_enabled:1; + u32 reserved1:3; + u32 verbosity:4; + u32 reserved2:24; + }; + u32 value; +} __packed; + /* This Action will be programmed in C180 - SOFT_SCRATCH_O_REG */ enum host2guc_action { HOST2GUC_ACTION_DEFAULT = 0x0, HOST2GUC_ACTION_SAMPLE_FORCEWAKE = 0x6, HOST2GUC_ACTION_ALLOCATE_DOORBELL = 0x10, HOST2GUC_ACTION_DEALLOCATE_DOORBELL = 0x20, + HOST2GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30, + HOST2GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302, HOST2GUC_ACTION_ENTER_S_STATE = 0x501, HOST2GUC_ACTION_EXIT_S_STATE = 0x502, HOST2GUC_ACTION_SLPC_REQUEST = 0x3003, + HOST2GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x0E000, HOST2GUC_ACTION_LIMIT }; @@ -449,4 +521,10 @@ enum guc2host_status { GUC2HOST_STATUS_GENERIC_FAIL = GUC2HOST_STATUS(0x0000F000) }; +/* This action will be programmed in C1BC - SOFT_SCRATCH_15_REG */ +enum guc2host_message { + GUC2HOST_MSG_CRASH_DUMP_POSTED = (1 << 1), + GUC2HOST_MSG_FLUSH_LOG_BUFFER = (1 << 3) +}; + #endif |