diff options
| -rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmmii.c | 125 |
1 files changed, 0 insertions, 125 deletions
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 368d5eab306b..7fdc352628f9 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -28,59 +28,6 @@ #include "bcmgenet.h" -/* read a value from the MII */ -static int bcmgenet_mii_read(struct mii_bus *bus, int phy_id, int location) -{ - int ret; - struct net_device *dev = bus->priv; - struct bcmgenet_priv *priv = netdev_priv(dev); - u32 reg; - - bcmgenet_umac_writel(priv, (MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | - (location << MDIO_REG_SHIFT)), UMAC_MDIO_CMD); - /* Start MDIO transaction*/ - reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD); - reg |= MDIO_START_BUSY; - bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD); - wait_event_timeout(priv->wq, - !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) - & MDIO_START_BUSY), - HZ / 100); - ret = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD); - - /* Some broken devices are known not to release the line during - * turn-around, e.g: Broadcom BCM53125 external switches, so check for - * that condition here and ignore the MDIO controller read failure - * indication. - */ - if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (ret & MDIO_READ_FAIL)) - return -EIO; - - return ret & 0xffff; -} - -/* write a value to the MII */ -static int bcmgenet_mii_write(struct mii_bus *bus, int phy_id, - int location, u16 val) -{ - struct net_device *dev = bus->priv; - struct bcmgenet_priv *priv = netdev_priv(dev); - u32 reg; - - bcmgenet_umac_writel(priv, (MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | - (location << MDIO_REG_SHIFT) | (0xffff & val)), - UMAC_MDIO_CMD); - reg = bcmgenet_umac_readl(priv, UMAC_MDIO_CMD); - reg |= MDIO_START_BUSY; - bcmgenet_umac_writel(priv, reg, UMAC_MDIO_CMD); - wait_event_timeout(priv->wq, - !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) & - MDIO_START_BUSY), - HZ / 100); - - return 0; -} - /* setup netdev link state when PHY link status change and * update UMAC and RGMII block when link up */ @@ -393,78 +340,6 @@ int bcmgenet_mii_probe(struct net_device *dev) return 0; } -/* Workaround for integrated BCM7xxx Gigabit PHYs which have a problem with - * their internal MDIO management controller making them fail to successfully - * be read from or written to for the first transaction. We insert a dummy - * BMSR read here to make sure that phy_get_device() and get_phy_id() can - * correctly read the PHY MII_PHYSID1/2 registers and successfully register a - * PHY device for this peripheral. - * - * Once the PHY driver is registered, we can workaround subsequent reads from - * there (e.g: during system-wide power management). - * - * bus->reset is invoked before mdiobus_scan during mdiobus_register and is - * therefore the right location to stick that workaround. Since we do not want - * to read from non-existing PHYs, we either use bus->phy_mask or do a manual - * Device Tree scan to limit the search area. - */ -static int bcmgenet_mii_bus_reset(struct mii_bus *bus) -{ - struct net_device *dev = bus->priv; - struct bcmgenet_priv *priv = netdev_priv(dev); - struct device_node *np = priv->mdio_dn; - struct device_node *child = NULL; - u32 read_mask = 0; - int addr = 0; - - if (!np) { - read_mask = 1 << priv->phy_addr; - } else { - for_each_available_child_of_node(np, child) { - addr = of_mdio_parse_addr(&dev->dev, child); - if (addr < 0) - continue; - - read_mask |= 1 << addr; - } - } - - for (addr = 0; addr < PHY_MAX_ADDR; addr++) { - if (read_mask & 1 << addr) { - dev_dbg(&dev->dev, "Workaround for PHY @ %d\n", addr); - mdiobus_read(bus, addr, MII_BMSR); - } - } - - return 0; -} - -static int bcmgenet_mii_alloc(struct bcmgenet_priv *priv) -{ - struct mii_bus *bus; - - if (priv->mii_bus) - return 0; - - priv->mii_bus = mdiobus_alloc(); - if (!priv->mii_bus) { - pr_err("failed to allocate\n"); - return -ENOMEM; - } - - bus = priv->mii_bus; - bus->priv = priv->dev; - bus->name = "bcmgenet MII bus"; - bus->parent = &priv->pdev->dev; - bus->read = bcmgenet_mii_read; - bus->write = bcmgenet_mii_write; - bus->reset = bcmgenet_mii_bus_reset; - snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", - priv->pdev->name, priv->pdev->id); - - return 0; -} - static struct device_node *bcmgenet_mii_of_find_mdio(struct bcmgenet_priv *priv) { struct device_node *dn = priv->pdev->dev.of_node; |