diff options
| -rw-r--r-- | arch/arm/mach-socfpga/socfpga.c | 4 | ||||
| -rw-r--r-- | drivers/reset/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/reset/Makefile | 1 | ||||
| -rw-r--r-- | drivers/reset/reset-simple.c | 13 | ||||
| -rw-r--r-- | drivers/reset/reset-socfpga.c | 88 |
5 files changed, 105 insertions, 11 deletions
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 5fb6f79059a8..afd98971d903 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -32,6 +32,8 @@ void __iomem *rst_manager_base_addr; void __iomem *sdr_ctl_base_addr; unsigned long socfpga_cpu1start_addr; +extern void __init socfpga_reset_init(void); + static void __init socfpga_sysmgr_init(void) { struct device_node *np; @@ -64,6 +66,7 @@ static void __init socfpga_init_irq(void) if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM)) socfpga_init_ocram_ecc(); + socfpga_reset_init(); } static void __init socfpga_arria10_init_irq(void) @@ -74,6 +77,7 @@ static void __init socfpga_arria10_init_irq(void) socfpga_init_arria10_l2_ecc(); if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM)) socfpga_init_arria10_ocram_ecc(); + socfpga_reset_init(); } static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index c21da9fe51ec..7ee64988faac 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -109,7 +109,7 @@ config RESET_QCOM_PDC config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED + default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, @@ -128,6 +128,14 @@ config RESET_STM32MP157 help This enables the RCC reset controller driver for STM32 MPUs. +config RESET_SOCFPGA + bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA + default ARCH_SOCFPGA + select RESET_SIMPLE + help + This enables the reset driver for the SoCFPGA ARMv7 platforms. This + driver gets initialized early during platform init calls. + config RESET_SUNXI bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI default ARCH_SUNXI diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index d08e8b90046a..b14de32eb610 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o +obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c index a91107fc9e27..77fbba3100c8 100644 --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c @@ -109,7 +109,7 @@ struct reset_simple_devdata { #define SOCFPGA_NR_BANKS 8 static const struct reset_simple_devdata reset_simple_socfpga = { - .reg_offset = 0x10, + .reg_offset = 0x20, .nr_resets = SOCFPGA_NR_BANKS * 32, .status_active_low = true, }; @@ -120,7 +120,8 @@ static const struct reset_simple_devdata reset_simple_active_low = { }; static const struct of_device_id reset_simple_dt_ids[] = { - { .compatible = "altr,rst-mgr", .data = &reset_simple_socfpga }, + { .compatible = "altr,stratix10-rst-mgr", + .data = &reset_simple_socfpga }, { .compatible = "st,stm32-rcc", }, { .compatible = "allwinner,sun6i-a31-clock-reset", .data = &reset_simple_active_low }, @@ -166,14 +167,6 @@ static int reset_simple_probe(struct platform_device *pdev) data->status_active_low = devdata->status_active_low; } - if (of_device_is_compatible(dev->of_node, "altr,rst-mgr") && - of_property_read_u32(dev->of_node, "altr,modrst-offset", - ®_offset)) { - dev_warn(dev, - "missing altr,modrst-offset property, assuming 0x%x!\n", - reg_offset); - } - data->membase += reg_offset; return devm_reset_controller_register(dev, &data->rcdev); diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c new file mode 100644 index 000000000000..318cfc51c441 --- /dev/null +++ b/drivers/reset/reset-socfpga.c @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018, Intel Corporation + * Copied from reset-sunxi.c + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include "reset-simple.h" + +#define SOCFPGA_NR_BANKS 8 +void __init socfpga_reset_init(void); + +static int a10_reset_init(struct device_node *np) +{ + struct reset_simple_data *data; + struct resource res; + resource_size_t size; + int ret; + u32 reg_offset = 0x10; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + ret = of_address_to_resource(np, 0, &res); + if (ret) + goto err_alloc; + + size = resource_size(&res); + if (!request_mem_region(res.start, size, np->name)) { + ret = -EBUSY; + goto err_alloc; + } + + data->membase = ioremap(res.start, size); + if (!data->membase) { + ret = -ENOMEM; + goto err_alloc; + } + + if (of_property_read_u32(np, "altr,modrst-offset", ®_offset)) + pr_warn("missing altr,modrst-offset property, assuming 0x10\n"); + data->membase += reg_offset; + + spin_lock_init(&data->lock); + + data->rcdev.owner = THIS_MODULE; + data->rcdev.nr_resets = SOCFPGA_NR_BANKS * 32; + data->rcdev.ops = &reset_simple_ops; + data->rcdev.of_node = np; + data->status_active_low = true; + + return reset_controller_register(&data->rcdev); + +err_alloc: + kfree(data); + return ret; +}; + +/* + * These are the reset controller we need to initialize early on in + * our system, before we can even think of using a regular device + * driver for it. + * The controllers that we can register through the regular device + * model are handled by the simple reset driver directly. + */ +static const struct of_device_id socfpga_early_reset_dt_ids[] __initconst = { + { .compatible = "altr,rst-mgr", }, + { /* sentinel */ }, +}; + +void __init socfpga_reset_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, socfpga_early_reset_dt_ids) + a10_reset_init(np); +} |