diff options
29 files changed, 1691 insertions, 197 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt new file mode 100644 index 000000000000..7fec3e100214 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt @@ -0,0 +1,17 @@ +* Device-Tree bindings for Cortina Systems Gemini Poweroff + +This is a special IP block in the Cortina Gemini SoC that only +deals with different ways to power the system down. + +Required properties: +- compatible: should be "cortina,gemini-power-controller" +- reg: should contain the physical memory base and size +- interrupts: should contain the power management interrupt + +Example: + +power-controller@4b000000 { + compatible = "cortina,gemini-power-controller"; + reg = <0x4b000000 0x100>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt index 1e2546f8b08a..022ed1f3bc80 100644 --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.txt @@ -3,13 +3,20 @@ Generic SYSCON mapped register poweroff driver This is a generic poweroff driver using syscon to map the poweroff register. The poweroff is generally performed with a write to the poweroff register defined by the register map pointed by syscon reference plus the offset -with the mask defined in the poweroff node. +with the value and mask defined in the poweroff node. Required properties: - compatible: should contain "syscon-poweroff" - regmap: this is phandle to the register map node - offset: offset in the register map for the poweroff register (in bytes) -- mask: the poweroff value written to the poweroff register (32 bit access) +- value: the poweroff value written to the poweroff register (32 bit access) + +Optional properties: +- mask: update only the register bits defined by the mask (32 bit) + +Legacy usage: +If a node doesn't contain a value property but contains a mask property, the +mask property is used as the value. Default will be little endian mode, 32 bit access only. diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt new file mode 100644 index 000000000000..80bd873c3b1d --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt @@ -0,0 +1,37 @@ +Motorola CPCAP PMIC battery charger binding + +Required properties: +- compatible: Shall be "motorola,mapphone-cpcap-charger" +- interrupts: Interrupt specifier for each name in interrupt-names +- interrupt-names: Should contain the following entries: + "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", + "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb" +- io-channels: IIO ADC channel specifier for each name in io-channel-names +- io-channel-names: Should contain the following entries: + "battdetb", "battp", "vbus", "chg_isense", "batti" + +Optional properties: +- mode-gpios: Optionally CPCAP charger can have a companion wireless + charge controller that is controlled with two GPIOs + that are active low. + +Example: + +cpcap_charger: charger { + compatible = "motorola,mapphone-cpcap-charger"; + interrupts-extended = < + &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 + &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0 + >; + interrupt-names = + "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", + "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"; + mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW + &gpio3 23 GPIO_ACTIVE_LOW>; + io-channels = <&cpcap_adc 0 &cpcap_adc 1 + &cpcap_adc 2 &cpcap_adc 5 + &cpcap_adc 6>; + io-channel-names = "battdetb", "battp", + "vbus", "chg_isense", + "batti"; +}; diff --git a/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt b/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt new file mode 100644 index 000000000000..5485633b1faa --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/lego_ev3_battery.txt @@ -0,0 +1,21 @@ +LEGO MINDSTORMS EV3 Battery +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery. +It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is +detected by a key switch in the battery compartment. + +Required properties: + - compatible: Must be "lego,ev3-battery" + - io-channels: phandles to analog inputs for reading voltage and current + - io-channel-names: Must be "voltage", "current" + - rechargeable-gpios: phandle to the rechargeable battery indication gpio + +Example: + + battery { + compatible = "lego,ev3-battery"; + io-channels = <&adc 4>, <&adc 3>; + io-channel-names = "voltage", "current"; + rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt index ea42ae12d924..a9d7aa60558b 100644 --- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt +++ b/Documentation/devicetree/bindings/power/supply/ltc2941.txt @@ -6,8 +6,8 @@ temperature monitoring, and uses a slightly different conversion formula for the charge counter. Required properties: -- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the - type of I2C chip attached. +- compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also + indicates the type of I2C chip attached. - reg: The 7-bit I2C address. - lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit negative value when the battery has been connected to the wrong end of the @@ -20,7 +20,7 @@ Required properties: Example from the Topic Miami Florida board: fuelgauge: ltc2943@64 { - compatible = "ltc2943"; + compatible = "lltc,ltc2943"; reg = <0x64>; lltc,resistor-sense = <15>; lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */ diff --git a/Documentation/devicetree/bindings/power/supply/max8925_batter.txt b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt index d7e3e0c0f71d..d7e3e0c0f71d 100644 --- a/Documentation/devicetree/bindings/power/supply/max8925_batter.txt +++ b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt diff --git a/drivers/extcon/devres.c b/drivers/extcon/devres.c index b40eb1805927..186fd735eb28 100644 --- a/drivers/extcon/devres.c +++ b/drivers/extcon/devres.c @@ -50,6 +50,13 @@ static void devm_extcon_dev_notifier_unreg(struct device *dev, void *res) extcon_unregister_notifier(this->edev, this->id, this->nb); } +static void devm_extcon_dev_notifier_all_unreg(struct device *dev, void *res) +{ + struct extcon_dev_notifier_devres *this = res; + + extcon_unregister_notifier_all(this->edev, this->nb); +} + /** * devm_extcon_dev_allocate - Allocate managed extcon device * @dev: device owning the extcon device being created @@ -214,3 +221,57 @@ void devm_extcon_unregister_notifier(struct device *dev, devm_extcon_dev_match, edev)); } EXPORT_SYMBOL(devm_extcon_unregister_notifier); + +/** + * devm_extcon_register_notifier_all() + * - Resource-managed extcon_register_notifier_all() + * @dev: device to allocate extcon device + * @edev: the extcon device that has the external connecotr. + * @nb: a notifier block to be registered. + * + * This function manages automatically the notifier of extcon device using + * device resource management and simplify the control of unregistering + * the notifier of extcon device. To get more information, refer that function. + * + * Returns 0 if success or negaive error number if failure. + */ +int devm_extcon_register_notifier_all(struct device *dev, struct extcon_dev *edev, + struct notifier_block *nb) +{ + struct extcon_dev_notifier_devres *ptr; + int ret; + + ptr = devres_alloc(devm_extcon_dev_notifier_all_unreg, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + ret = extcon_register_notifier_all(edev, nb); + if (ret) { + devres_free(ptr); + return ret; + } + + ptr->edev = edev; + ptr->nb = nb; + devres_add(dev, ptr); + + return 0; +} +EXPORT_SYMBOL(devm_extcon_register_notifier_all); + +/** + * devm_extcon_unregister_notifier_all() + * - Resource-managed extcon_unregister_notifier_all() + * @dev: device to allocate extcon device + * @edev: the extcon device that has the external connecotr. + * @nb: a notifier block to be registered. + */ +void devm_extcon_unregister_notifier_all(struct device *dev, + struct extcon_dev *edev, + struct notifier_block *nb) +{ + WARN_ON(devres_release(dev, devm_extcon_dev_notifier_all_unreg, + devm_extcon_dev_match, edev)); +} +EXPORT_SYMBOL(devm_extcon_unregister_notifier_all); diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index 09ac5e70c2f3..e7750545469f 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -448,8 +448,19 @@ int extcon_sync(struct extcon_dev *edev, unsigned int id) spin_lock_irqsave(&edev->lock, flags); state = !!(edev->state & BIT(index)); + + /* + * Call functions in a raw notifier chain for the specific one + * external connector. + */ raw_notifier_call_chain(&edev->nh[index], state, edev); + /* + * Call functions in a raw notifier chain for the all supported + * external connectors. + */ + raw_notifier_call_chain(&edev->nh_all, state, edev); + /* This could be in interrupt handler */ prop_buf = (char *)get_zeroed_page(GFP_ATOMIC); if (!prop_buf) { @@ -954,6 +965,59 @@ int extcon_unregister_notifier(struct extcon_dev *edev, unsigned int id, } EXPORT_SYMBOL_GPL(extcon_unregister_notifier); +/** + * extcon_register_notifier_all() - Register a notifier block for all connectors + * @edev: the extcon device that has the external connecotr. + * @nb: a notifier block to be registered. + * + * This fucntion registers a notifier block in order to receive the state + * change of all supported external connectors from extcon device. + * And The second parameter given to the callback of nb (val) is + * the current state and third parameter is the edev pointer. + * + * Returns 0 if success or error number if fail + */ +int extcon_register_notifier_all(struct extcon_dev *edev, + struct notifier_block *nb) +{ + unsigned long flags; + int ret; + + if (!edev || !nb) + return -EINVAL; + + spin_lock_irqsave(&edev->lock, flags); + ret = raw_notifier_chain_register(&edev->nh_all, nb); + spin_unlock_irqrestore(&edev->lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(extcon_register_notifier_all); + +/** + * extcon_unregister_notifier_all() - Unregister a notifier block from extcon. + * @edev: the extcon device that has the external connecotr. + * @nb: a notifier block to be registered. + * + * Returns 0 if success or error number if fail + */ +int extcon_unregister_notifier_all(struct extcon_dev *edev, + struct notifier_block *nb) +{ + unsigned long flags; + int ret; + + if (!edev || !nb) + return -EINVAL; + + spin_lock_irqsave(&edev->lock, flags); + ret = raw_notifier_chain_unregister(&edev->nh_all, nb); + spin_unlock_irqrestore(&edev->lock, flags); + + return ret; +} +EXPORT_SYMBOL_GPL(extcon_unregister_notifier_all); + static struct attribute *extcon_attrs[] = { &dev_attr_state.attr, &dev_attr_name.attr, @@ -1212,6 +1276,8 @@ int extcon_dev_register(struct extcon_dev *edev) for (index = 0; index < edev->max_supported; index++) RAW_INIT_NOTIFIER_HEAD(&edev->nh[index]); + RAW_INIT_NOTIFIER_HEAD(&edev->nh_all); + dev_set_drvdata(&edev->dev, edev); edev->state = 0; diff --git a/drivers/extcon/extcon.h b/drivers/extcon/extcon.h index 993ddccafe11..dddddcfa0587 100644 --- a/drivers/extcon/extcon.h +++ b/drivers/extcon/extcon.h @@ -21,6 +21,8 @@ * @dev: Device of this extcon. * @state: Attach/detach state of this extcon. Do not provide at * register-time. + * @nh_all: Notifier for the state change events for all supported + * external connectors from this extcon. * @nh: Notifier for the state change events from this extcon * @entry: To support list of extcon devices so that users can * search for extcon devices based on the extcon name. @@ -43,6 +45,7 @@ struct extcon_dev { /* Internal data. Please do not set. */ struct device dev; + struct raw_notifier_head nh_all; struct raw_notifier_head *nh; struct list_head entry; int max_supported; diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index b8cacccf18c8..13f1714cf6f7 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -67,6 +67,15 @@ config POWER_RESET_BRCMSTB Say Y here if you have a Broadcom STB board and you wish to have restart support. +config POWER_RESET_GEMINI_POWEROFF + bool "Cortina Gemini power-off driver" + depends on ARCH_GEMINI || COMPILE_TEST + depends on OF && HAS_IOMEM + default ARCH_GEMINI + help + This driver supports turning off the Cortina Gemini SoC. + Select this if you're building a kernel with Gemini SoC support. + config POWER_RESET_GPIO bool "GPIO power-off driver" depends on OF_GPIO diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 11dae3b56ff9..58cf5b30559f 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o +obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF) += gemini-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o diff --git a/drivers/power/reset/gemini-poweroff.c b/drivers/power/reset/gemini-poweroff.c new file mode 100644 index 000000000000..de878fd26f27 --- /dev/null +++ b/drivers/power/reset/gemini-poweroff.c @@ -0,0 +1,160 @@ +/* + * Gemini power management controller + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * Inspired by code from the SL3516 board support by Jason Lee + * Inspired by code from Janos Laube <janos.dev@gmail.com> + */ +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/bitops.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/reboot.h> + +#define GEMINI_PWC_ID 0x00010500 +#define GEMINI_PWC_IDREG 0x00 +#define GEMINI_PWC_CTRLREG 0x04 +#define GEMINI_PWC_STATREG 0x08 + +#define GEMINI_CTRL_SHUTDOWN BIT(0) +#define GEMINI_CTRL_ENABLE BIT(1) +#define GEMINI_CTRL_IRQ_CLR BIT(2) + +#define GEMINI_STAT_CIR BIT(4) +#define GEMINI_STAT_RTC BIT(5) +#define GEMINI_STAT_POWERBUTTON BIT(6) + +struct gemini_powercon { + struct device *dev; + void __iomem *base; +}; + +static irqreturn_t gemini_powerbutton_interrupt(int irq, void *data) +{ + struct gemini_powercon *gpw = data; + u32 val; + + /* ACK the IRQ */ + val = readl(gpw->base + GEMINI_PWC_CTRLREG); + val |= GEMINI_CTRL_IRQ_CLR; + writel(val, gpw->base + GEMINI_PWC_CTRLREG); + + val = readl(gpw->base + GEMINI_PWC_STATREG); + val &= 0x70U; + switch (val) { + case GEMINI_STAT_CIR: + dev_info(gpw->dev, "infrared poweroff\n"); + orderly_poweroff(true); + break; + case GEMINI_STAT_RTC: + dev_info(gpw->dev, "RTC poweroff\n"); + orderly_poweroff(true); + break; + case GEMINI_STAT_POWERBUTTON: + dev_info(gpw->dev, "poweroff button pressed\n"); + orderly_poweroff(true); + break; + default: + dev_info(gpw->dev, "other power management IRQ\n"); + break; + } + + return IRQ_HANDLED; +} + +/* This callback needs this static local as it has void as argument */ +static struct gemini_powercon *gpw_poweroff; + +static void gemini_poweroff(void) +{ + struct gemini_powercon *gpw = gpw_poweroff; + u32 val; + + dev_crit(gpw->dev, "Gemini power off\n"); + val = readl(gpw->base + GEMINI_PWC_CTRLREG); + val |= GEMINI_CTRL_ENABLE | GEMINI_CTRL_IRQ_CLR; + writel(val, gpw->base + GEMINI_PWC_CTRLREG); + + val &= ~GEMINI_CTRL_ENABLE; + val |= GEMINI_CTRL_SHUTDOWN; + writel(val, gpw->base + GEMINI_PWC_CTRLREG); +} + +static int gemini_poweroff_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct gemini_powercon *gpw; + u32 val; + int irq; + int ret; + + gpw = devm_kzalloc(dev, sizeof(*gpw), GFP_KERNEL); + if (!gpw) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gpw->base = devm_ioremap_resource(dev, res); + if (IS_ERR(gpw->base)) + return PTR_ERR(gpw->base); + + irq = platform_get_irq(pdev, 0); + if (!irq) + return -EINVAL; + + gpw->dev = dev; + + val = readl(gpw->base + GEMINI_PWC_IDREG); + val &= 0xFFFFFF00U; + if (val != GEMINI_PWC_ID) { + dev_err(dev, "wrong power controller ID: %08x\n", + val); + return -ENODEV; + } + + /* Clear the power management IRQ */ + val = readl(gpw->base + GEMINI_PWC_CTRLREG); + val |= GEMINI_CTRL_IRQ_CLR; + writel(val, gpw->base + GEMINI_PWC_CTRLREG); + + ret = devm_request_irq(dev, irq, gemini_powerbutton_interrupt, 0, + "poweroff", gpw); + if (ret) + return ret; + + pm_power_off = gemini_poweroff; + gpw_poweroff = gpw; + + /* + * Enable the power controller. This is crucial on Gemini + * systems: if this is not done, pressing the power button + * will result in unconditional poweroff without any warning. + * This makes the kernel handle the poweroff. + */ + val = readl(gpw->base + GEMINI_PWC_CTRLREG); + val |= GEMINI_CTRL_ENABLE; + writel(val, gpw->base + GEMINI_PWC_CTRLREG); + + dev_info(dev, "Gemini poweroff driver registered\n"); + + return 0; +} + +static const struct of_device_id gemini_poweroff_of_match[] = { + { + .compatible = "cortina,gemini-power-controller", + }, + {} +}; + +static struct platform_driver gemini_poweroff_driver = { + .probe = gemini_poweroff_probe, + .driver = { + .name = "gemini-poweroff", + .of_match_table = gemini_poweroff_of_match, + }, +}; +builtin_platform_driver(gemini_poweroff_driver); diff --git a/drivers/power/reset/syscon-poweroff.c b/drivers/power/reset/syscon-poweroff.c index b68338399e5e..f9f1cb54fbf9 100644 --- a/drivers/power/reset/syscon-poweroff.c +++ b/drivers/power/reset/syscon-poweroff.c @@ -28,12 +28,13 @@ static struct regmap *map; static u32 offset; +static u32 value; static u32 mask; static void syscon_poweroff(void) { /* Issue the poweroff */ - regmap_write(map, offset, mask); + regmap_update_bits(map, offset, mask, value); mdelay(1000); @@ -43,6 +44,7 @@ static void syscon_poweroff(void) static int syscon_poweroff_probe(struct platform_device *pdev) { char symname[KSYM_NAME_LEN]; + int mask_err, value_err; map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap"); if (IS_ERR(map)) { @@ -55,11 +57,22 @@ static int syscon_poweroff_probe(struct platform_device *pdev) return -EINVAL; } - if (of_property_read_u32(pdev->dev.of_node, "mask", &mask)) { - dev_err(&pdev->dev, "unable to read 'mask'"); + value_err = of_property_read_u32(pdev->dev.of_node, "value", &value); + mask_err = of_property_read_u32(pdev->dev.of_node, "mask", &mask); + if (value_err && mask_err) { + dev_err(&pdev->dev, "unable to read 'value' and 'mask'"); return -EINVAL; } + if (value_err) { + /* support old binding */ + value = mask; + mask = 0xFFFFFFFF; + } else if (mask_err) { + /* support value without mask*/ + mask = 0xFFFFFFFF; + } + if (pm_power_off) { lookup_symbol_name((ulong)pm_power_off, symname); dev_err(&pdev->dev, diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index da54ac88f068..da922756149f 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -117,6 +117,12 @@ config BATTERY_DS2782 Say Y here to enable support for the DS2782/DS2786 standalone battery gas-gauge. +config BATTERY_LEGO_EV3 + tristate "LEGO MINDSTORMS EV3 battery" + depends on OF && IIO && GPIOLIB + help + Say Y here to enable support for the LEGO MINDSTORMS EV3 battery. + config BATTERY_PMU tristate "Apple PMU battery" depends on PPC32 && ADB_PMU @@ -317,6 +323,14 @@ config BATTERY_RX51 Say Y here to enable support for battery information on Nokia RX-51, also known as N900 tablet. +config CHARGER_CPCAP + tristate "CPCAP PMIC Charger Driver" + depends on MFD_CPCAP && IIO + default MFD_CPCAP + help + Say Y to enable support for CPCAP PMIC charger driver for Motorola + mobile devices such as Droid 4. + config CHARGER_ISP1704 tristate "ISP1704 USB Charger Detection" depends on USB_PHY @@ -438,6 +452,7 @@ config CHARGER_BQ2415X config CHARGER_BQ24190 tristate "TI BQ24190 battery charger driver" depends on I2C + depends on EXTCON depends on GPIOLIB || COMPILE_TEST help Say Y to enable support for the TI BQ24190 battery charger. diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 3789a2c06fdf..39fc733e6cc4 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o +obj-$(CONFIG_BATTERY_LEGO_EV3) += lego_ev3_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o @@ -51,6 +52,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o +obj-$(CONFIG_CHARGER_CPCAP) += cpcap-charger.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o diff --git a/drivers/power/supply/ab8500_bmdata.c b/drivers/power/supply/ab8500_bmdata.c index d29864533093..8c49586015d0 100644 --- a/drivers/power/supply/ab8500_bmdata.c +++ b/drivers/power/supply/ab8500_bmdata.c @@ -430,10 +430,10 @@ static const struct abx500_maxim_parameters ab8500_maxi_params = { }; static const struct abx500_maxim_parameters abx540_maxi_params = { - .ena_maxi = true, - .chg_curr = 3000, - .wait_cycles = 10, - .charger_curr_step = 200, + .ena_maxi = true, + .chg_curr = 3000, + .wait_cycles = 10, + .charger_curr_step = 200, }; static const struct abx500_bm_charger_parameters chg = { diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index a4f08492abeb..bd9e5c3d8cc2 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -11,16 +11,15 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/extcon.h> #include <linux/of_irq.h> #include <linux/of_device.h> #include <linux/pm_runtime.h> #include <linux/power_supply.h> +#include <linux/workqueue.h> #include <linux/gpio.h> #include <linux/i2c.h> -#include <linux/power/bq24190_charger.h> - - #define BQ24190_MANUFACTURER "Texas Instruments" #define BQ24190_REG_ISC 0x00 /* Input Source Control */ @@ -39,6 +38,9 @@ #define BQ24190_REG_POC_WDT_RESET_SHIFT 6 #define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4)) #define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4 +#define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0 +#define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1 +#define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2 #define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1)) #define BQ24190_REG_POC_SYS_MIN_SHIFT 1 #define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0) @@ -151,10 +153,12 @@ struct bq24190_dev_info { struct device *dev; struct power_supply *charger; struct power_supply *battery; + struct extcon_dev *extcon; + struct notifier_block extcon_nb; + struct delayed_work extcon_work; char model_name[I2C_NAME_SIZE]; - kernel_ulong_t model; - unsigned int gpio_int; - unsigned int irq; + bool initialized; + bool irq_event; struct mutex f_reg_lock; u8 f_reg; u8 ss_reg; @@ -168,6 +172,12 @@ struct bq24190_dev_info { * number at that index in the array is the real-world value that it * represents. */ + +/* REG00[2:0] (IINLIM) in uAh */ +static const int bq24190_isc_iinlim_values[] = { + 100000, 150000, 500000, 900000, 1200000, 1500000, 2000000, 3000000 +}; + /* REG02[7:2] (ICHG) in uAh */ static const int bq24190_ccc_ichg_values[] = { 512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000, @@ -418,6 +428,7 @@ static ssize_t bq24190_sysfs_show(struct device *dev, struct power_supply *psy = dev_get_drvdata(dev); struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy); struct bq24190_sysfs_field_info *info; + ssize_t count; int ret; u8 v; @@ -425,11 +436,20 @@ static ssize_t bq24190_sysfs_show(struct device *dev, if (!info) return -EINVAL; + ret = pm_runtime_get_sync(bdi->dev); + if (ret < 0) + return ret; + ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v); if (ret) - return ret; + count = ret; + else + count = scnprintf(buf, PAGE_SIZE, "%hhx\n", v); + + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); - return scnprintf(buf, PAGE_SIZE, "%hhx\n", v); + return count; } static ssize_t bq24190_sysfs_store(struct device *dev, @@ -449,9 +469,16 @@ static ssize_t bq24190_sysfs_store(struct device *dev, if (ret < 0) return ret; + ret = pm_runtime_get_sync(bdi->dev); + if (ret < 0) + return ret; + ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v); if (ret) - return ret; + count = ret; + + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); return count; } @@ -523,16 +550,13 @@ static int bq24190_register_reset(struct bq24190_dev_info *bdi) if (ret < 0) return ret; - if (!v) - break; + if (v == 0) + return 0; - udelay(10); + usleep_range(100, 200); } while (--limit); - if (!limit) - return -EIO; - - return 0; + return -EIO; } /* Charger power supply property routines */ @@ -793,7 +817,9 @@ static int bq24190_charger_get_property(struct power_supply *psy, dev_dbg(bdi->dev, "prop: %d\n", psp); - pm_runtime_get_sync(bdi->dev); + ret = pm_runtime_get_sync(bdi->dev); + if (ret < 0) + return ret; switch (psp) { case POWER_SUPPLY_PROP_CHARGE_TYPE: @@ -833,7 +859,9 @@ static int bq24190_charger_get_property(struct power_supply *psy, ret = -ENODATA; } - pm_runtime_put_sync(bdi->dev); + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); + return ret; } @@ -846,7 +874,9 @@ static int bq24190_charger_set_property(struct power_supply *psy, dev_dbg(bdi->dev, "prop: %d\n", psp); - pm_runtime_get_sync(bdi->dev); + ret = pm_runtime_get_sync(bdi->dev); + if (ret < 0) + return ret; switch (psp) { case POWER_SUPPLY_PROP_CHARGE_TYPE: @@ -862,7 +892,9 @@ static int bq24190_charger_set_property(struct power_supply *psy, ret = -EINVAL; } - pm_runtime_put_sync(bdi->dev); + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); + return ret; } @@ -1063,7 +1095,9 @@ static int bq24190_battery_get_property(struct power_supply *psy, dev_dbg(bdi->dev, "prop: %d\n", psp); - pm_runtime_get_sync(bdi->dev); + ret = pm_runtime_get_sync(bdi->dev); + if (ret < 0) + return ret; switch (psp) { case POWER_SUPPLY_PROP_STATUS: @@ -1091,7 +1125,9 @@ static int bq24190_battery_get_property(struct power_supply *psy, ret = -ENODATA; } - pm_runtime_put_sync(bdi->dev); + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); + return ret; } @@ -1104,7 +1140,9 @@ static int bq24190_battery_set_property(struct power_supply *psy, dev_dbg(bdi->dev, "prop: %d\n", psp); - pm_runtime_get_sync(bdi->dev); + ret = pm_runtime_get_sync(bdi->dev); + if (ret < 0) + return ret; switch (psp) { case POWER_SUPPLY_PROP_ONLINE: @@ -1117,7 +1155,9 @@ static int bq24190_battery_set_property(struct power_supply *psy, ret = -EINVAL; } - pm_runtime_put_sync(bdi->dev); + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); + return ret; } @@ -1157,9 +1197,8 @@ static const struct power_supply_desc bq24190_battery_desc = { .property_is_writeable = bq24190_battery_property_is_writeable, }; -static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) +static void bq24190_check_status(struct bq24190_dev_info *bdi) { - struct bq24190_dev_info *bdi = data; const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK; const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK | BQ24190_REG_F_NTC_FAULT_MASK; @@ -1167,12 +1206,10 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) u8 ss_reg = 0, f_reg = 0; int i, ret; - pm_runtime_get_sync(bdi->dev); - ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg); if (ret < 0) { dev_err(bdi->dev, "Can't read SS reg: %d\n", ret); - goto out; + return; } i = 0; @@ -1180,12 +1217,17 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg); if (ret < 0) { dev_err(bdi->dev, "Can't read F reg: %d\n", ret); - goto out; + return; } } while (f_reg && ++i < 2); + /* ignore over/under voltage fault after disconnect */ + if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) && + !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) + f_reg = 0; + if (f_reg != bdi->f_reg) { - dev_info(bdi->dev, + dev_warn(bdi->dev, "Fault: boost %d, charge %d, battery %d, ntc %d\n", !!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK), !!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK), @@ -1229,90 +1271,126 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) if (alert_battery) power_supply_changed(bdi->battery); -out: - pm_runtime_put_sync(bdi->dev); - dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg); +} + +static irqreturn_t bq24190_irq_handler_thread(int irq, void *data) +{ + struct bq24190_dev_info *bdi = data; + int error; + + bdi->irq_event = true; + error = pm_runtime_get_sync(bdi->dev); + if (error < 0) { + dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); + pm_runtime_put_noidle(bdi->dev); + return IRQ_NONE; + } + bq24190_check_status(bdi); + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); + bdi->irq_event = false; return IRQ_HANDLED; } -static int bq24190_hw_init(struct bq24190_dev_info *bdi) +static void bq24190_extcon_work(struct work_struct *work) { + struct bq24190_dev_info *bdi = + container_of(work, struct bq24190_dev_info, extcon_work.work); + int error, iinlim = 0; u8 v; - int ret; - - pm_runtime_get_sync(bdi->dev); - /* First check that the device really is what its supposed to be */ - ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS, - BQ24190_REG_VPRS_PN_MASK, - BQ24190_REG_VPRS_PN_SHIFT, - &v); - if (ret < 0) - goto out; + error = pm_runtime_get_sync(bdi->dev); + if (error < 0) { + dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); + pm_runtime_put_noidle(bdi->dev); + return; + } - if (v != bdi->model) { - ret = -ENODEV; - goto out; + if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_SDP) == 1) + iinlim = 500000; + else if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_CDP) == 1 || + extcon_get_state(bdi->extcon, EXTCON_CHG_USB_ACA) == 1) + iinlim = 1500000; + else if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_DCP) == 1) + iinlim = 2000000; + + if (iinlim) { + error = bq24190_set_field_val(bdi, BQ24190_REG_ISC, + BQ24190_REG_ISC_IINLIM_MASK, + BQ24190_REG_ISC_IINLIM_SHIFT, + bq24190_isc_iinlim_values, + ARRAY_SIZE(bq24190_isc_iinlim_values), + iinlim); + if (error < 0) + dev_err(bdi->dev, "Can't set IINLIM: %d\n", error); } - ret = bq24190_register_reset(bdi); - if (ret < 0) - goto out; + /* if no charger found and in USB host mode, set OTG 5V boost, else normal */ + if (!iinlim && extcon_get_state(bdi->extcon, EXTCON_USB_HOST) == 1) + v = BQ24190_REG_POC_CHG_CONFIG_OTG; + else + v = BQ24190_REG_POC_CHG_CONFIG_CHARGE; - ret = bq24190_set_mode_host(bdi); - if (ret < 0) - goto out; + error = bq24190_write_mask(bdi, BQ24190_REG_POC, + BQ24190_REG_POC_CHG_CONFIG_MASK, + BQ24190_REG_POC_CHG_CONFIG_SHIFT, + v); + if (error < 0) + dev_err(bdi->dev, "Can't set CHG_CONFIG: %d\n", error); - ret = bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); -out: - pm_runtime_put_sync(bdi->dev); - return ret; + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); } -#ifdef CONFIG_OF -static int bq24190_setup_dt(struct bq24190_dev_info *bdi) +static int bq24190_extcon_event(struct notifier_block *nb, unsigned long event, + void *param) { - bdi->irq = irq_of_parse_and_map(bdi->dev->of_node, 0); - if (bdi->irq <= 0) - return -1; + struct bq24190_dev_info *bdi = + container_of(nb, struct bq24190_dev_info, extcon_nb); - return 0; -} -#else -static int bq24190_setup_dt(struct bq24190_dev_info *bdi) -{ - return -1; + /* + * The Power-Good detection may take up to 220ms, sometimes + * the external charger detection is quicker, and the bq24190 will + * reset to iinlim based on its own charger detection (which is not + * hooked up when using external charger detection) resulting in + * a too low default 500mA iinlim. Delay applying the extcon value + * for 300ms to avoid this. + */ + queue_delayed_work(system_wq, &bdi->extcon_work, msecs_to_jiffies(300)); + + return NOTIFY_OK; } -#endif -static int bq24190_setup_pdata(struct bq24190_dev_info *bdi, - struct bq24190_platform_data *pdata) +static int bq24190_hw_init(struct bq24190_dev_info *bdi) { + u8 v; int ret; - if (!gpio_is_valid(pdata->gpio_int)) - return -1; - - ret = gpio_request(pdata->gpio_int, dev_name(bdi->dev)); + /* First check that the device really is what its supposed to be */ + ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS, + BQ24190_REG_VPRS_PN_MASK, + BQ24190_REG_VPRS_PN_SHIFT, + &v); if (ret < 0) - return -1; + return ret; - ret = gpio_direction_input(pdata->gpio_int); - if (ret < 0) - goto out; + if (v != BQ24190_REG_VPRS_PN_24190 && + v != BQ24190_REG_VPRS_PN_24192I) { + dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v); + return -ENODEV; + } - bdi->irq = gpio_to_irq(pdata->gpio_int); - if (!bdi->irq) - goto out; + ret = bq24190_register_reset(bdi); + if (ret < 0) + return ret; - bdi->gpio_int = pdata->gpio_int; - return 0; + ret = bq24190_set_mode_host(bdi); + if (ret < 0) + return ret; -out: - gpio_free(pdata->gpio_int); - return -1; + return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); } static int bq24190_probe(struct i2c_client *client, @@ -1320,9 +1398,9 @@ static int bq24190_probe(struct i2c_client *client, { struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct device *dev = &client->dev; - struct bq24190_platform_data *pdata = client->dev.platform_data; struct power_supply_config charger_cfg = {}, battery_cfg = {}; struct bq24190_dev_info *bdi; + const char *name; int ret; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { @@ -1338,7 +1416,6 @@ static int bq24190_probe(struct i2c_client *client, bdi->client = client; bdi->dev = dev; - bdi->model = id->driver_data; strncpy(bdi->model_name, id->name, I2C_NAME_SIZE); mutex_init(&bdi->f_reg_lock); bdi->f_reg = 0; @@ -1346,23 +1423,43 @@ static int bq24190_probe(struct i2c_client *client, i2c_set_clientdata(client, bdi); - if (dev->of_node) - ret = bq24190_setup_dt(bdi); - else - ret = bq24190_setup_pdata(bdi, pdata); - - if (ret) { + if (!client->irq) { dev_err(dev, "Can't get irq info\n"); return -EINVAL; } + /* + * Devicetree platforms should get extcon via phandle (not yet supported). + * On ACPI platforms, extcon clients may invoke us with: + * struct property_entry pe[] = + * { PROPERTY_ENTRY_STRING("extcon-name", client_name), ... }; + * struct i2c_board_info bi = + * { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq }; + * struct i2c_adapter ad = { ... }; + * i2c_add_adapter(&ad); + * i2c_new_device(&ad, &bi); + */ + if (device_property_read_string(dev, "extcon-name", &name) == 0) { + bdi->extcon = extcon_get_extcon_dev(name); + if (!bdi->extcon) + return -EPROBE_DEFER; + + dev_info(bdi->dev, "using extcon device %s\n", name); + } + pm_runtime_enable(dev); - pm_runtime_resume(dev); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_autosuspend_delay(dev, 600); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "pm_runtime_get failed: %i\n", ret); + goto out_pmrt; + } ret = bq24190_hw_init(bdi); if (ret < 0) { dev_err(dev, "Hardware init failed\n"); - goto out1; + goto out_pmrt; } charger_cfg.drv_data = bdi; @@ -1373,7 +1470,7 @@ static int bq24190_probe(struct i2c_client *client, if (IS_ERR(bdi->charger)) { dev_err(dev, "Can't register charger\n"); ret = PTR_ERR(bdi->charger); - goto out1; + goto out_pmrt; } battery_cfg.drv_data = bdi; @@ -1382,87 +1479,160 @@ static int bq24190_probe(struct i2c_client *client, if (IS_ERR(bdi->battery)) { dev_err(dev, "Can't register battery\n"); ret = PTR_ERR(bdi->battery); - goto out2; + goto out_charger; } ret = bq24190_sysfs_create_group(bdi); if (ret) { dev_err(dev, "Can't create sysfs entries\n"); - goto out3; + goto out_battery; } - ret = devm_request_threaded_irq(dev, bdi->irq, NULL, + bdi->initialized = true; + + ret = devm_request_threaded_irq(dev, client->irq, NULL, bq24190_irq_handler_thread, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "bq24190-charger", bdi); if (ret < 0) { dev_err(dev, "Can't set up irq handler\n"); - goto out4; + goto out_sysfs; + } + + if (bdi->extcon) { + INIT_DELAYED_WORK(&bdi->extcon_work, bq24190_extcon_work); + bdi->extcon_nb.notifier_call = bq24190_extcon_event; + ret = devm_extcon_register_notifier_all(dev, bdi->extcon, + &bdi->extcon_nb); + if (ret) { + dev_err(dev, "Can't register extcon\n"); + goto out_sysfs; + } + + /* Sync initial cable state */ + queue_delayed_work(system_wq, &bdi->extcon_work, 0); } + enable_irq_wake(client->irq); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + return 0; -out4: +out_sysfs: bq24190_sysfs_remove_group(bdi); -out3: +out_battery: power_supply_unregister(bdi->battery); -out2: +out_charger: power_supply_unregister(bdi->charger); -out1: +out_pmrt: + pm_runtime_put_sync(dev); + pm_runtime_dont_use_autosuspend(dev); pm_runtime_disable(dev); - if (bdi->gpio_int) - gpio_free(bdi->gpio_int); return ret; } static int bq24190_remove(struct i2c_client *client) { struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + int error; - pm_runtime_get_sync(bdi->dev); - bq24190_register_reset(bdi); - pm_runtime_put_sync(bdi->dev); + error = pm_runtime_get_sync(bdi->dev); + if (error < 0) { + dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); + pm_runtime_put_noidle(bdi->dev); + } + bq24190_register_reset(bdi); bq24190_sysfs_remove_group(bdi); power_supply_unregister(bdi->battery); power_supply_unregister(bdi->charger); + if (error >= 0) + pm_runtime_put_sync(bdi->dev); + pm_runtime_dont_use_autosuspend(bdi->dev); pm_runtime_disable(bdi->dev); - if (bdi->gpio_int) - gpio_free(bdi->gpio_int); + return 0; +} + +static __maybe_unused int bq24190_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + + if (!bdi->initialized) + return 0; + + dev_dbg(bdi->dev, "%s\n", __func__); + + return 0; +} + +static __maybe_unused int bq24190_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + + if (!bdi->initialized) + return 0; + + if (!bdi->irq_event) { + dev_dbg(bdi->dev, "checking events on possible wakeirq\n"); + bq24190_check_status(bdi); + } return 0; } -#ifdef CONFIG_PM_SLEEP -static int bq24190_pm_suspend(struct device *dev) +static __maybe_unused int bq24190_pm_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + int error; + + error = pm_runtime_get_sync(bdi->dev); + if (error < 0) { + dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); + pm_runtime_put_noidle(bdi->dev); + } - pm_runtime_get_sync(bdi->dev); bq24190_register_reset(bdi); - pm_runtime_put_sync(bdi->dev); + + if (error >= 0) { + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); + } return 0; } -static int bq24190_pm_resume(struct device *dev) +static __maybe_unused int bq24190_pm_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct bq24190_dev_info *bdi = i2c_get_clientdata(client); + int error; bdi->f_reg = 0; bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */ - pm_runtime_get_sync(bdi->dev); + error = pm_runtime_get_sync(bdi->dev); + if (error < 0) { + dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); + pm_runtime_put_noidle(bdi->dev); + } + bq24190_register_reset(bdi); bq24190_set_mode_host(bdi); bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg); - pm_runtime_put_sync(bdi->dev); + + if (error >= 0) { + pm_runtime_mark_last_busy(bdi->dev); + pm_runtime_put_autosuspend(bdi->dev); + } /* Things may have changed while suspended so alert upper layer */ power_supply_changed(bdi->charger); @@ -1470,17 +1640,16 @@ static int bq24190_pm_resume(struct device *dev) return 0; } -#endif -static SIMPLE_DEV_PM_OPS(bq24190_pm_ops, bq24190_pm_suspend, bq24190_pm_resume); +static const struct dev_pm_ops bq24190_pm_ops = { + SET_RUNTIME_PM_OPS(bq24190_runtime_suspend, bq24190_runtime_resume, + NULL) + SET_SYSTEM_SLEEP_PM_OPS(bq24190_pm_suspend, bq24190_pm_resume) +}; -/* - * Only support the bq24190 right now. The bq24192, bq24192i, and bq24193 - * are similar but not identical so the driver needs to be extended to - * support them. - */ static const struct i2c_device_id bq24190_i2c_ids[] = { - { "bq24190", BQ24190_REG_VPRS_PN_24190 }, + { "bq24190" }, + { "bq24192i" }, { }, }; MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids); diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index f993a55cde20..8e2c41ded171 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -723,7 +723,7 @@ static int bq25890_irq_probe(struct bq25890_device *bq) { struct gpio_desc *irq; - irq = devm_gpiod_get_index(bq->dev, BQ25890_IRQ_PIN, 0, GPIOD_IN); + irq = devm_gpiod_get(bq->dev, BQ25890_IRQ_PIN, GPIOD_IN); if (IS_ERR(irq)) { dev_err(bq->dev, "Could not probe irq pin.\n"); return PTR_ERR(irq); diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c index e664ca7c0afd..adc3761831e1 100644 --- a/drivers/power/supply/charger-manager.c +++ b/drivers/power/supply/charger-manager.c @@ -1198,7 +1198,7 @@ static int charger_extcon_notifier(struct notifier_block *self, static int charger_extcon_init(struct charger_manager *cm, struct charger_cable *cable) { - int ret = 0; + int ret; /* * Charger manager use Extcon framework to identify @@ -1232,7 +1232,7 @@ static int charger_manager_register_extcon(struct charger_manager *cm) { struct charger_desc *desc = cm->desc; struct charger_regulator *charger; - int ret = 0; + int ret; int i; int j; @@ -1255,15 +1255,14 @@ static int charger_manager_register_extcon(struct charger_manager *cm) if (ret < 0) { dev_err(cm->dev, "Cannot initialize charger(%s)\n", charger->regulator_name); - goto err; + return ret; } cable->charger = charger; cable->cm = cm; } } -err: - return ret; + return 0; } /* help function of sysfs node to control charger(regulator) */ @@ -1372,7 +1371,7 @@ static int charger_manager_register_sysfs(struct charger_manager *cm) int chargers_externally_control = 1; char buf[11]; char *str; - int ret = 0; + int ret; int i; /* Create sysfs entry to control charger(regulator) */ @@ -1382,10 +1381,9 @@ static int charger_manager_register_sysfs(struct charger_manager *cm) snprintf(buf, 10, "charger.%d", i); str = devm_kzalloc(cm->dev, sizeof(char) * (strlen(buf) + 1), GFP_KERNEL); - if (!str) { - ret = -ENOMEM; - goto err; - } + if (!str) + return -ENOMEM; + strcpy(str, buf); charger->attrs[0] = &charger->attr_name.attr; @@ -1426,19 +1424,16 @@ static int charger_manager_register_sysfs(struct charger_manager *cm) if (ret < 0) { dev_err(cm->dev, "Cannot create sysfs entry of %s regulator\n", charger->regulator_name); - ret = -EINVAL; - goto err; + return ret; } } if (chargers_externally_control) { dev_err(cm->dev, "Cannot register regulator because charger-manager must need at least one charger for charging battery\n"); - ret = -EINVAL; - goto err; + return -EINVAL; } -err: - return ret; + return 0; } static int cm_init_thermal_data(struct charger_manager *cm, @@ -1626,7 +1621,7 @@ static int charger_manager_probe(struct platform_device *pdev) { struct charger_desc *desc = cm_get_drv_data(pdev); struct charger_manager *cm; - int ret = 0, i = 0; + int ret, i = 0; int j = 0; union power_supply_propval val; struct power_supply *fuel_gauge; @@ -1887,14 +1882,12 @@ MODULE_DEVICE_TABLE(platform, charger_manager_id); static int cm_suspend_noirq(struct device *dev) { - int ret = 0; - if (device_may_wakeup(dev)) { device_set_wakeup_capable(dev, false); - ret = -EAGAIN; + return -EAGAIN; } - return ret; + return 0; } static bool cm_need_to_awake(void) diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c new file mode 100644 index 000000000000..543a1bd21ab9 --- /dev/null +++ b/drivers/power/supply/cpcap-charger.c @@ -0,0 +1,681 @@ +/* + * Motorola CPCAP PMIC battery charger driver + * + * Copyright (C) 2017 Tony Lindgren <tony@atomide.com> + * + * Rewritten for Linux power framework with some parts based on + * on earlier driver found in the Motorola Linux kernel: + * + * Copyright (C) 2009-2010 Motorola, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/atomic.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> + +#include <linux/gpio/consumer.h> +#include <linux/usb/phy_companion.h> +#include <linux/phy/omap_usb.h> +#include <linux/usb/otg.h> +#include <linux/iio/consumer.h> +#include <linux/mfd/motorola-cpcap.h> + +/* CPCAP_REG_CRM register bits */ +#define CPCAP_REG_CRM_UNUSED_641_15 BIT(15) /* 641 = register number */ +#define CPCAP_REG_CRM_UNUSED_641_14 BIT(14) /* 641 = register number */ +#define CPCAP_REG_CRM_CHRG_LED_EN BIT(13) +#define CPCAP_REG_CRM_RVRSMODE BIT(12) +#define CPCAP_REG_CRM_ICHRG_TR1 BIT(11) +#define CPCAP_REG_CRM_ICHRG_TR0 BIT(10) +#define CPCAP_REG_CRM_FET_OVRD BIT(9) +#define CPCAP_REG_CRM_FET_CTRL BIT(8) +#define CPCAP_REG_CRM_VCHRG3 BIT(7) +#define CPCAP_REG_CRM_VCHRG2 BIT(6) +#define CPCAP_REG_CRM_VCHRG1 BIT(5) +#define CPCAP_REG_CRM_VCHRG0 BIT(4) +#define CPCAP_REG_CRM_ICHRG3 BIT(3) +#define CPCAP_REG_CRM_ICHRG2 BIT(2) +#define CPCAP_REG_CRM_ICHRG1 BIT(1) +#define CPCAP_REG_CRM_ICHRG0 BIT(0) + +/* CPCAP_REG_CRM trickle charge voltages */ +#define CPCAP_REG_CRM_TR(val) (((val) & 0x3) << 10) +#define CPCAP_REG_CRM_TR_0A00 CPCAP_REG_CRM_TR(0x0) +#define CPCAP_REG_CRM_TR_0A24 CPCAP_REG_CRM_TR(0x1) +#define CPCAP_REG_CRM_TR_0A48 CPCAP_REG_CRM_TR(0x2) +#define CPCAP_REG_CRM_TR_0A72 CPCAP_REG_CRM_TR(0x4) + +/* CPCAP_REG_CRM charge voltages */ +#define CPCAP_REG_CRM_VCHRG(val) (((val) & 0xf) << 4) +#define CPCAP_REG_CRM_VCHRG_3V80 CPCAP_REG_CRM_VCHRG(0x0) +#define CPCAP_REG_CRM_VCHRG_4V10 CPCAP_REG_CRM_VCHRG(0x1) +#define CPCAP_REG_CRM_VCHRG_4V15 CPCAP_REG_CRM_VCHRG(0x2) +#define CPCAP_REG_CRM_VCHRG_4V20 CPCAP_REG_CRM_VCHRG(0x3) +#define CPCAP_REG_CRM_VCHRG_4V22 CPCAP_REG_CRM_VCHRG(0x4) +#define CPCAP_REG_CRM_VCHRG_4V24 CPCAP_REG_CRM_VCHRG(0x5) +#define CPCAP_REG_CRM_VCHRG_4V26 CPCAP_REG_CRM_VCHRG(0x6) +#define CPCAP_REG_CRM_VCHRG_4V28 CPCAP_REG_CRM_VCHRG(0x7) +#define CPCAP_REG_CRM_VCHRG_4V30 CPCAP_REG_CRM_VCHRG(0x8) +#define CPCAP_REG_CRM_VCHRG_4V32 CPCAP_REG_CRM_VCHRG(0x9) +#define CPCAP_REG_CRM_VCHRG_4V34 CPCAP_REG_CRM_VCHRG(0xa) +#define CPCAP_REG_CRM_VCHRG_4V36 CPCAP_REG_CRM_VCHRG(0xb) +#define CPCAP_REG_CRM_VCHRG_4V38 CPCAP_REG_CRM_VCHRG(0xc) +#define CPCAP_REG_CRM_VCHRG_4V40 CPCAP_REG_CRM_VCHRG(0xd) +#define CPCAP_REG_CRM_VCHRG_4V42 CPCAP_REG_CRM_VCHRG(0xe) +#define CPCAP_REG_CRM_VCHRG_4V44 CPCAP_REG_CRM_VCHRG(0xf) + +/* CPCAP_REG_CRM charge currents */ +#define CPCAP_REG_CRM_ICHRG(val) (((val) & 0xf) << 0) +#define CPCAP_REG_CRM_ICHRG_0A000 CPCAP_REG_CRM_ICHRG(0x0) +#define CPCAP_REG_CRM_ICHRG_0A070 CPCAP_REG_CRM_ICHRG(0x1) +#define CPCAP_REG_CRM_ICHRG_0A176 CPCAP_REG_CRM_ICHRG(0x2) +#define CPCAP_REG_CRM_ICHRG_0A264 CPCAP_REG_CRM_ICHRG(0x3) +#define CPCAP_REG_CRM_ICHRG_0A352 CPCAP_REG_CRM_ICHRG(0x4) +#define CPCAP_REG_CRM_ICHRG_0A440 CPCAP_REG_CRM_ICHRG(0x5) +#define CPCAP_REG_CRM_ICHRG_0A528 CPCAP_REG_CRM_ICHRG(0x6) +#define CPCAP_REG_CRM_ICHRG_0A616 CPCAP_REG_CRM_ICHRG(0x7) +#define CPCAP_REG_CRM_ICHRG_0A704 CPCAP_REG_CRM_ICHRG(0x8) +#define CPCAP_REG_CRM_ICHRG_0A792 CPCAP_REG_CRM_ICHRG(0x9) +#define CPCAP_REG_CRM_ICHRG_0A880 CPCAP_REG_CRM_ICHRG(0xa) +#define CPCAP_REG_CRM_ICHRG_0A968 CPCAP_REG_CRM_ICHRG(0xb) +#define CPCAP_REG_CRM_ICHRG_1A056 CPCAP_REG_CRM_ICHRG(0xc) +#define CPCAP_REG_CRM_ICHRG_1A144 CPCAP_REG_CRM_ICHRG(0xd) +#define CPCAP_REG_CRM_ICHRG_1A584 CPCAP_REG_CRM_ICHRG(0xe) +#define CPCAP_REG_CRM_ICHRG_NO_LIMIT CPCAP_REG_CRM_ICHRG(0xf) + +enum { + CPCAP_CHARGER_IIO_BATTDET, + CPCAP_CHARGER_IIO_VOLTAGE, + CPCAP_CHARGER_IIO_VBUS, + CPCAP_CHARGER_IIO_CHRG_CURRENT, + CPCAP_CHARGER_IIO_BATT_CURRENT, + CPCAP_CHARGER_IIO_NR, +}; + +struct cpcap_charger_ddata { + struct device *dev; + struct regmap *reg; + struct list_head irq_list; + struct delayed_work detect_work; + struct delayed_work vbus_work; + struct gpio_desc *gpio[2]; /* gpio_reven0 & 1 */ + + struct iio_channel *channels[CPCAP_CHARGER_IIO_NR]; + + struct power_supply *usb; + + struct phy_companion comparator; /* For USB VBUS */ + bool vbus_enabled; + atomic_t active; + + int status; +}; + +struct cpcap_interrupt_desc { + int irq; + struct list_head node; + const char *name; +}; + +struct cpcap_charger_ints_state { + bool chrg_det; + bool rvrs_chrg; + bool vbusov; + + bool chrg_se1b; + bool rvrs_mode; + bool chrgcurr1; + bool vbusvld; + + bool battdetb; +}; + +static enum power_supply_property cpcap_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static bool cpcap_charger_battery_found(struct cpcap_charger_ddata *ddata) +{ + struct iio_channel *channel; + int error, value; + + channel = ddata->channels[CPCAP_CHARGER_IIO_BATTDET]; + error = iio_read_channel_raw(channel, &value); + if (error < 0) { + dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); + + return false; + } + + return value == 1; +} + +static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata) +{ + struct iio_channel *channel; + int error, value = 0; + + channel = ddata->channels[CPCAP_CHARGER_IIO_VOLTAGE]; + error = iio_read_channel_processed(channel, &value); + if (error < 0) { + dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); + + return 0; + } + + return value; +} + +static int cpcap_charger_get_charge_current(struct cpcap_charger_ddata *ddata) +{ + struct iio_channel *channel; + int error, value = 0; + + channel = ddata->channels[CPCAP_CHARGER_IIO_CHRG_CURRENT]; + error = iio_read_channel_processed(channel, &value); + if (error < 0) { + dev_warn(ddata->dev, "%s failed: %i\n", __func__, error); + + return 0; + } + + return value; +} + +static int cpcap_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = ddata->status; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (ddata->status == POWER_SUPPLY_STATUS_CHARGING) + val->intval = cpcap_charger_get_charge_voltage(ddata) * + 1000; + else + val->intval = 0; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (ddata->status == POWER_SUPPLY_STATUS_CHARGING) + val->intval = cpcap_charger_get_charge_current(ddata) * + 1000; + else + val->intval = 0; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = ddata->status == POWER_SUPPLY_STATUS_CHARGING; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void cpcap_charger_set_cable_path(struct cpcap_charger_ddata *ddata, + bool enabled) +{ + if (!ddata->gpio[0]) + return; + + gpiod_set_value(ddata->gpio[0], enabled); +} + +static void cpcap_charger_set_inductive_path(struct cpcap_charger_ddata *ddata, + bool enabled) +{ + if (!ddata->gpio[1]) + return; + + gpiod_set_value(ddata->gpio[1], enabled); +} + +static int cpcap_charger_set_state(struct cpcap_charger_ddata *ddata, + int max_voltage, int charge_current, + int trickle_current) +{ + bool enable; + int error; + + enable = max_voltage && (charge_current || trickle_current); + dev_dbg(ddata->dev, "%s enable: %i\n", __func__, enable); + + if (!enable) { + error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, + 0x3fff, + CPCAP_REG_CRM_FET_OVRD | + CPCAP_REG_CRM_FET_CTRL); + if (error) { + ddata->status = POWER_SUPPLY_STATUS_UNKNOWN; + goto out_err; + } + + ddata->status = POWER_SUPPLY_STATUS_DISCHARGING; + + return 0; + } + + error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff, + CPCAP_REG_CRM_CHRG_LED_EN | + trickle_current | + CPCAP_REG_CRM_FET_OVRD | + CPCAP_REG_CRM_FET_CTRL | + max_voltage | + charge_current); + if (error) { + ddata->status = POWER_SUPPLY_STATUS_UNKNOWN; + goto out_err; + } + + ddata->status = POWER_SUPPLY_STATUS_CHARGING; + + return 0; + +out_err: + dev_err(ddata->dev, "%s failed with %i\n", __func__, error); + + return error; +} + +static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata) +{ + int error, value = 0; + struct iio_channel *channel = + ddata->channels[CPCAP_CHARGER_IIO_VBUS]; + + error = iio_read_channel_processed(channel, &value); + if (error >= 0) + return value > 3900 ? true : false; + + dev_err(ddata->dev, "error reading VBUS: %i\n", error); + + return false; +} + +/* VBUS control functions for the USB PHY companion */ + +static void cpcap_charger_vbus_work(struct work_struct *work) +{ + struct cpcap_charger_ddata *ddata; + bool vbus = false; + int error; + + ddata = container_of(work, struct cpcap_charger_ddata, + vbus_work.work); + + if (ddata->vbus_enabled) { + vbus = cpcap_charger_vbus_valid(ddata); + if (vbus) { + dev_info(ddata->dev, "VBUS already provided\n"); + + return; + } + + cpcap_charger_set_cable_path(ddata, false); + cpcap_charger_set_inductive_path(ddata, false); + + error = cpcap_charger_set_state(ddata, 0, 0, 0); + if (error) + goto out_err; + + error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, + CPCAP_REG_CRM_RVRSMODE, + CPCAP_REG_CRM_RVRSMODE); + if (error) + goto out_err; + } else { + error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, + CPCAP_REG_CRM_RVRSMODE, 0); + if (error) + goto out_err; + + cpcap_charger_set_cable_path(ddata, true); + cpcap_charger_set_inductive_path(ddata, true); + } + + return; + +out_err: + dev_err(ddata->dev, "%s could not %s vbus: %i\n", __func__, + ddata->vbus_enabled ? "enable" : "disable", error); +} + +static int cpcap_charger_set_vbus(struct phy_companion *comparator, + bool enabled) +{ + struct cpcap_charger_ddata *ddata = + container_of(comparator, struct cpcap_charger_ddata, + comparator); + + ddata->vbus_enabled = enabled; + schedule_delayed_work(&ddata->vbus_work, 0); + + return 0; +} + +/* Charger interrupt handling functions */ + +static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata, + struct cpcap_charger_ints_state *s) +{ + int val, error; + + error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val); + if (error) + return error; + + s->chrg_det = val & BIT(13); + s->rvrs_chrg = val & BIT(12); + s->vbusov = val & BIT(11); + + error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val); + if (error) + return error; + + s->chrg_se1b = val & BIT(13); + s->rvrs_mode = val & BIT(6); + s->chrgcurr1 = val & BIT(4); + s->vbusvld = val & BIT(3); + + error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val); + if (error) + return error; + + s->battdetb = val & BIT(6); + + return 0; +} + +static void cpcap_usb_detect(struct work_struct *work) +{ + struct cpcap_charger_ddata *ddata; + struct cpcap_charger_ints_state s; + int error; + + ddata = container_of(work, struct cpcap_charger_ddata, + detect_work.work); + + error = cpcap_charger_get_ints_state(ddata, &s); + if (error) + return; + + if (cpcap_charger_vbus_valid(ddata) && s.chrgcurr1) { + int max_current; + + if (cpcap_charger_battery_found(ddata)) + max_current = CPCAP_REG_CRM_ICHRG_1A584; + else + max_current = CPCAP_REG_CRM_ICHRG_0A528; + + error = cpcap_charger_set_state(ddata, + CPCAP_REG_CRM_VCHRG_4V20, + max_current, + CPCAP_REG_CRM_TR_0A72); + if (error) + goto out_err; + } else { + error = cpcap_charger_set_state(ddata, 0, 0, 0); + if (error) + goto out_err; + } + + return; + +out_err: + dev_err(ddata->dev, "%s failed with %i\n", __func__, error); +} + +static irqreturn_t cpcap_charger_irq_thread(int irq, void *data) +{ + struct cpcap_charger_ddata *ddata = data; + + if (!atomic_read(&ddata->active)) + return IRQ_NONE; + + schedule_delayed_work(&ddata->detect_work, 0); + + return IRQ_HANDLED; +} + +static int cpcap_usb_init_irq(struct platform_device *pdev, + struct cpcap_charger_ddata *ddata, + const char *name) +{ + struct cpcap_interrupt_desc *d; + int irq, error; + + irq = platform_get_irq_byname(pdev, name); + if (!irq) + return -ENODEV; + + error = devm_request_threaded_irq(ddata->dev, irq, NULL, + cpcap_charger_irq_thread, + IRQF_SHARED, + name, ddata); + if (error) { + dev_err(ddata->dev, "could not get irq %s: %i\n", + name, error); + + return error; + } + + d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL); + if (!d) + return -ENOMEM; + + d->name = name; + d->irq = irq; + list_add(&d->node, &ddata->irq_list); + + return 0; +} + +static const char * const cpcap_charger_irqs[] = { + /* REG_INT_0 */ + "chrg_det", "rvrs_chrg", + + /* REG_INT1 */ + "chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr1", "vbusvld", + + /* REG_INT_3 */ + "battdetb", +}; + +static int cpcap_usb_init_interrupts(struct platform_device *pdev, + struct cpcap_charger_ddata *ddata) +{ + int i, error; + + for (i = 0; i < ARRAY_SIZE(cpcap_charger_irqs); i++) { + error = cpcap_usb_init_irq(pdev, ddata, cpcap_charger_irqs[i]); + if (error) + return error; + } + + return 0; +} + +static void cpcap_charger_init_optional_gpios(struct cpcap_charger_ddata *ddata) +{ + int i; + + for (i = 0; i < 2; i++) { + ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode", + i, GPIOD_OUT_HIGH); + if (IS_ERR(ddata->gpio[i])) { + dev_info(ddata->dev, "no mode change GPIO%i: %li\n", + i, PTR_ERR(ddata->gpio[i])); + ddata->gpio[i] = NULL; + } + } +} + +static int cpcap_charger_init_iio(struct cpcap_charger_ddata *ddata) +{ + const char * const names[CPCAP_CHARGER_IIO_NR] = { + "battdetb", "battp", "vbus", "chg_isense", "batti", + }; + int error, i; + + for (i = 0; i < CPCAP_CHARGER_IIO_NR; i++) { + ddata->channels[i] = devm_iio_channel_get(ddata->dev, + names[i]); + if (IS_ERR(ddata->channels[i])) { + error = PTR_ERR(ddata->channels[i]); + goto out_err; + } + + if (!ddata->channels[i]->indio_dev) { + error = -ENXIO; + goto out_err; + } + } + + return 0; + +out_err: + dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n", + error); + + return error; +} + +static const struct power_supply_desc cpcap_charger_usb_desc = { + .name = "cpcap_usb", + .type = POWER_SUPPLY_TYPE_USB, + .properties = cpcap_charger_props, + .num_properties = ARRAY_SIZE(cpcap_charger_props), + .get_property = cpcap_charger_get_property, +}; + +#ifdef CONFIG_OF +static const struct of_device_id cpcap_charger_id_table[] = { + { + .compatible = "motorola,mapphone-cpcap-charger", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, cpcap_charger_id_table); +#endif + +static int cpcap_charger_probe(struct platform_device *pdev) +{ + struct cpcap_charger_ddata *ddata; + const struct of_device_id *of_id; + int error; + + of_id = of_match_device(of_match_ptr(cpcap_charger_id_table), + &pdev->dev); + if (!of_id) + return -EINVAL; + + ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + ddata->dev = &pdev->dev; + + ddata->reg = dev_get_regmap(ddata->dev->parent, NULL); + if (!ddata->reg) + return -ENODEV; + + INIT_LIST_HEAD(&ddata->irq_list); + INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect); + INIT_DELAYED_WORK(&ddata->vbus_work, cpcap_charger_vbus_work); + platform_set_drvdata(pdev, ddata); + + error = cpcap_charger_init_iio(ddata); + if (error) + return error; + + atomic_set(&ddata->active, 1); + + ddata->usb = devm_power_supply_register(ddata->dev, + &cpcap_charger_usb_desc, + NULL); + if (IS_ERR(ddata->usb)) { + error = PTR_ERR(ddata->usb); + dev_err(ddata->dev, "failed to register USB charger: %i\n", + error); + + return error; + } + + error = cpcap_usb_init_interrupts(pdev, ddata); + if (error) + return error; + + ddata->comparator.set_vbus = cpcap_charger_set_vbus; + error = omap_usb2_set_comparator(&ddata->comparator); + if (error == -ENODEV) { + dev_info(ddata->dev, "charger needs phy, deferring probe\n"); + return -EPROBE_DEFER; + } + + cpcap_charger_init_optional_gpios(ddata); + + schedule_delayed_work(&ddata->detect_work, 0); + + return 0; +} + +static int cpcap_charger_remove(struct platform_device *pdev) +{ + struct cpcap_charger_ddata *ddata = platform_get_drvdata(pdev); + int error; + + atomic_set(&ddata->active, 0); + error = omap_usb2_set_comparator(NULL); + if (error) + dev_warn(ddata->dev, "could not clear USB comparator: %i\n", + error); + + error = cpcap_charger_set_state(ddata, 0, 0, 0); + if (error) + dev_warn(ddata->dev, "could not clear charger: %i\n", + error); + cancel_delayed_work_sync(&ddata->vbus_work); + cancel_delayed_work_sync(&ddata->detect_work); + + return 0; +} + +static struct platform_driver cpcap_charger_driver = { + .probe = cpcap_charger_probe, + .driver = { + .name = "cpcap-charger", + .of_match_table = of_match_ptr(cpcap_charger_id_table), + }, + .remove = cpcap_charger_remove, +}; +module_platform_driver(cpcap_charger_driver); + +MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>"); +MODULE_DESCRIPTION("CPCAP Battery Charger Interface driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:cpcap-charger"); diff --git a/drivers/power/supply/lego_ev3_battery.c b/drivers/power/supply/lego_ev3_battery.c new file mode 100644 index 000000000000..7b993d669f7f --- /dev/null +++ b/drivers/power/supply/lego_ev3_battery.c @@ -0,0 +1,228 @@ +/* + * Battery driver for LEGO MINDSTORMS EV3 + * + * Copyright (C) 2017 David Lechner <david@lechnology.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/iio/consumer.h> +#include <linux/iio/types.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> + +struct lego_ev3_battery { + struct iio_channel *iio_v; + struct iio_channel *iio_i; + struct gpio_desc *rechargeable_gpio; + struct power_supply *psy; + int technology; + int v_max; + int v_min; +}; + +static int lego_ev3_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct lego_ev3_battery *batt = power_supply_get_drvdata(psy); + int val2; + + switch (psp) { + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = batt->technology; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + /* battery voltage is iio channel * 2 + Vce of transistor */ + iio_read_channel_processed(batt->iio_v, &val->intval); + val->intval *= 2000; + val->intval += 200000; + /* plus adjust for shunt resistor drop */ + iio_read_channel_processed(batt->iio_i, &val2); + val2 *= 1000; + val2 /= 15; + val->intval += val2; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = batt->v_max; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = batt->v_min; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + /* battery current is iio channel / 15 / 0.05 ohms */ + iio_read_channel_processed(batt->iio_i, &val->intval); + val->intval *= 20000; + val->intval /= 15; + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_SYSTEM; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int lego_ev3_battery_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct lego_ev3_battery *batt = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_TECHNOLOGY: + /* + * Only allow changing technology from Unknown to NiMH. Li-ion + * batteries are automatically detected and should not be + * overridden. Rechargeable AA batteries, on the other hand, + * cannot be automatically detected, and so must be manually + * specified. This should only be set once during system init, + * so there is no mechanism to go back to Unknown. + */ + if (batt->technology != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) + return -EINVAL; + switch (val->intval) { + case POWER_SUPPLY_TECHNOLOGY_NiMH: + batt->technology = POWER_SUPPLY_TECHNOLOGY_NiMH; + batt->v_max = 7800000; + batt->v_min = 5400000; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static int lego_ev3_battery_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + struct lego_ev3_battery *batt = power_supply_get_drvdata(psy); + + return psp == POWER_SUPPLY_PROP_TECHNOLOGY && + batt->technology == POWER_SUPPLY_TECHNOLOGY_UNKNOWN; +} + +static enum power_supply_property lego_ev3_battery_props[] = { + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_SCOPE, +}; + +static const struct power_supply_desc lego_ev3_battery_desc = { + .name = "lego-ev3-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = lego_ev3_battery_props, + .num_properties = ARRAY_SIZE(lego_ev3_battery_props), + .get_property = lego_ev3_battery_get_property, + .set_property = lego_ev3_battery_set_property, + .property_is_writeable = lego_ev3_battery_property_is_writeable, +}; + +static int lego_ev3_battery_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct lego_ev3_battery *batt; + struct power_supply_config psy_cfg = {}; + int err; + + batt = devm_kzalloc(dev, sizeof(*batt), GFP_KERNEL); + if (!batt) + return -ENOMEM; + + platform_set_drvdata(pdev, batt); + + batt->iio_v = devm_iio_channel_get(dev, "voltage"); + err = PTR_ERR_OR_ZERO(batt->iio_v); + if (err) { + if (err != -EPROBE_DEFER) + dev_err(dev, "Failed to get voltage iio channel\n"); + return err; + } + + batt->iio_i = devm_iio_channel_get(dev, "current"); + err = PTR_ERR_OR_ZERO(batt->iio_i); + if (err) { + if (err != -EPROBE_DEFER) + dev_err(dev, "Failed to get current iio channel\n"); + return err; + } + + batt->rechargeable_gpio = devm_gpiod_get(dev, "rechargeable", GPIOD_IN); + err = PTR_ERR_OR_ZERO(batt->rechargeable_gpio); + if (err) { + if (err != -EPROBE_DEFER) + dev_err(dev, "Failed to get rechargeable gpio\n"); + return err; + } + + /* + * The rechargeable battery indication switch cannot be changed without + * removing the battery, so we only need to read it once. + */ + if (gpiod_get_value(batt->rechargeable_gpio)) { + /* 2-cell Li-ion, 7.4V nominal */ + batt->technology = POWER_SUPPLY_TECHNOLOGY_LION; + batt->v_max = 84000000; + batt->v_min = 60000000; + } else { + /* 6x AA Alkaline, 9V nominal */ + batt->technology = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; + batt->v_max = 90000000; + batt->v_min = 48000000; + } + + psy_cfg.of_node = pdev->dev.of_node; + psy_cfg.drv_data = batt; + + batt->psy = devm_power_supply_register(dev, &lego_ev3_battery_desc, + &psy_cfg); + err = PTR_ERR_OR_ZERO(batt->psy); + if (err) { + dev_err(dev, "failed to register power supply\n"); + return err; + } + + return 0; +} + +static const struct of_device_id of_lego_ev3_battery_match[] = { + { .compatible = "lego,ev3-battery", }, + { } +}; +MODULE_DEVICE_TABLE(of, of_lego_ev3_battery_match); + +static struct platform_driver lego_ev3_battery_driver = { + .driver = { + .name = "lego-ev3-battery", + .of_match_table = of_lego_ev3_battery_match, + }, + .probe = lego_ev3_battery_probe, +}; +module_platform_driver(lego_ev3_battery_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Lechner <david@lechnology.com>"); +MODULE_DESCRIPTION("LEGO MINDSTORMS EV3 Battery Driver"); diff --git a/drivers/power/supply/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c index 509e2b341bd6..677f7c40b25a 100644 --- a/drivers/power/supply/lp8788-charger.c +++ b/drivers/power/supply/lp8788-charger.c @@ -651,7 +651,7 @@ static ssize_t lp8788_show_eoc_time(struct device *dev, { struct lp8788_charger *pchg = dev_get_drvdata(dev); char *stime[] = { "400ms", "5min", "10min", "15min", - "20min", "25min", "30min" "No timeout" }; + "20min", "25min", "30min", "No timeout" }; u8 val; lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val); diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c index 4adf2ba021ce..7efb908f4451 100644 --- a/drivers/power/supply/ltc2941-battery-gauge.c +++ b/drivers/power/supply/ltc2941-battery-gauge.c @@ -9,6 +9,7 @@ */ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/swab.h> @@ -61,7 +62,7 @@ struct ltc294x_info { struct power_supply *supply; /* Supply pointer */ struct power_supply_desc supply_desc; /* Supply description */ struct delayed_work work; /* Work scheduler */ - int num_regs; /* Number of registers (chip type) */ + unsigned long num_regs; /* Number of registers (chip type) */ int charge; /* Last charge register content */ int r_sense; /* mOhm */ int Qlsb; /* nAh */ @@ -387,7 +388,7 @@ static int ltc294x_i2c_probe(struct i2c_client *client, np = of_node_get(client->dev.of_node); - info->num_regs = id->driver_data; + info->num_regs = (unsigned long)of_device_get_match_data(&client->dev); info->supply_desc.name = np->name; /* r_sense can be negative, when sense+ is connected to the battery @@ -497,9 +498,23 @@ static const struct i2c_device_id ltc294x_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id); +static const struct of_device_id ltc294x_i2c_of_match[] = { + { + .compatible = "lltc,ltc2941", + .data = (void *)LTC2941_NUM_REGS + }, + { + .compatible = "lltc,ltc2943", + .data = (void *)LTC2943_NUM_REGS + }, + { }, +}; +MODULE_DEVICE_TABLE(of, ltc294x_i2c_of_match); + static struct i2c_driver ltc294x_driver = { .driver = { .name = "LTC2941", + .of_match_table = ltc294x_i2c_of_match, .pm = LTC294X_PM_OPS, }, .probe = ltc294x_i2c_probe, diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c index e7c3649b31a0..33c40f79d23d 100644 --- a/drivers/power/supply/max17040_battery.c +++ b/drivers/power/supply/max17040_battery.c @@ -277,9 +277,17 @@ static const struct i2c_device_id max17040_id[] = { }; MODULE_DEVICE_TABLE(i2c, max17040_id); +static const struct of_device_id max17040_of_match[] = { + { .compatible = "maxim,max17040" }, + { .compatible = "maxim,max77836-battery" }, + { }, +}; +MODULE_DEVICE_TABLE(of, max17040_of_match); + static struct i2c_driver max17040_i2c_driver = { .driver = { .name = "max17040", + .of_match_table = max17040_of_match, .pm = MAX17040_PM_OPS, }, .probe = max17040_probe, diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c index 353765a5f44c..15947dbb511e 100644 --- a/drivers/power/supply/sbs-charger.c +++ b/drivers/power/supply/sbs-charger.c @@ -137,10 +137,7 @@ static enum power_supply_property sbs_properties[] = { static bool sbs_readable_reg(struct device *dev, unsigned int reg) { - if (reg < SBS_CHARGER_REG_SPEC_INFO) - return false; - else - return true; + return reg >= SBS_CHARGER_REG_SPEC_INFO; } static bool sbs_volatile_reg(struct device *dev, unsigned int reg) diff --git a/drivers/power/supply/tps65217_charger.c b/drivers/power/supply/tps65217_charger.c index 29b61e81b385..1f5234098aaf 100644 --- a/drivers/power/supply/tps65217_charger.c +++ b/drivers/power/supply/tps65217_charger.c @@ -58,8 +58,6 @@ static int tps65217_config_charger(struct tps65217_charger *charger) { int ret; - dev_dbg(charger->dev, "%s\n", __func__); - /* * tps65217 rev. G, p. 31 (see p. 32 for NTC schematic) * @@ -205,8 +203,6 @@ static int tps65217_charger_probe(struct platform_device *pdev) int ret; int i; - dev_dbg(&pdev->dev, "%s\n", __func__); - charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); if (!charger) return -ENOMEM; diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c index bcd4dc304f27..990ff3d218bc 100644 --- a/drivers/power/supply/twl4030_charger.c +++ b/drivers/power/supply/twl4030_charger.c @@ -1117,7 +1117,7 @@ fail: return ret; } -static int __exit twl4030_bci_remove(struct platform_device *pdev) +static int twl4030_bci_remove(struct platform_device *pdev) { struct twl4030_bci *bci = platform_get_drvdata(pdev); @@ -1148,11 +1148,11 @@ MODULE_DEVICE_TABLE(of, twl_bci_of_match); static struct platform_driver twl4030_bci_driver = { .probe = twl4030_bci_probe, + .remove = twl4030_bci_remove, .driver = { .name = "twl4030_bci", .of_match_table = of_match_ptr(twl_bci_of_match), }, - .remove = __exit_p(twl4030_bci_remove), }; module_platform_driver(twl4030_bci_driver); diff --git a/include/linux/extcon.h b/include/linux/extcon.h index 7010fb01a81a..7e206a9f88db 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -236,11 +236,11 @@ extern int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id, unsigned int prop); /* - * Following APIs are to monitor every action of a notifier. - * Registrar gets notified for every external port of a connection device. - * Probably this could be used to debug an action of notifier; however, - * we do not recommend to use this for normal 'notifiee' device drivers who - * want to be notified by a specific external port of the notifier. + * Following APIs are to monitor the status change of the external connectors. + * extcon_register_notifier(*edev, id, *nb) : Register a notifier block + * for specific external connector of the extcon. + * extcon_register_notifier_all(*edev, *nb) : Register a notifier block + * for all supported external connectors of the extcon. */ extern int extcon_register_notifier(struct extcon_dev *edev, unsigned int id, struct notifier_block *nb); @@ -253,6 +253,17 @@ extern void devm_extcon_unregister_notifier(struct device *dev, struct extcon_dev *edev, unsigned int id, struct notifier_block *nb); +extern int extcon_register_notifier_all(struct extcon_dev *edev, + struct notifier_block *nb); +extern int extcon_unregister_notifier_all(struct extcon_dev *edev, + struct notifier_block *nb); +extern int devm_extcon_register_notifier_all(struct device *dev, + struct extcon_dev *edev, + struct notifier_block *nb); +extern void devm_extcon_unregister_notifier_all(struct device *dev, + struct extcon_dev *edev, + struct notifier_block *nb); + /* * Following API get the extcon device from devicetree. * This function use phandle of devicetree to get extcon device directly. diff --git a/include/linux/power/bq24190_charger.h b/include/linux/power/bq24190_charger.h deleted file mode 100644 index 9f0283721cbc..000000000000 --- a/include/linux/power/bq24190_charger.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Platform data for the TI bq24190 battery charger driver. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _BQ24190_CHARGER_H_ -#define _BQ24190_CHARGER_H_ - -struct bq24190_platform_data { - unsigned int gpio_int; /* GPIO pin that's connected to INT# */ -}; - -#endif |