diff options
-rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 31 | ||||
-rw-r--r-- | drivers/iio/Kconfig | 3 | ||||
-rw-r--r-- | drivers/iio/industrialio-core.c | 16 | ||||
-rw-r--r-- | drivers/staging/comedi/drivers.c | 5 | ||||
-rw-r--r-- | drivers/staging/gdm72xx/netlink_k.c | 2 | ||||
-rw-r--r-- | drivers/staging/iio/Documentation/device.txt | 2 | ||||
-rw-r--r-- | drivers/staging/iio/adc/Kconfig | 1 | ||||
-rw-r--r-- | drivers/staging/iio/adc/ad7606_core.c | 3 | ||||
-rw-r--r-- | drivers/staging/omapdrm/omap_fbdev.c | 10 | ||||
-rw-r--r-- | drivers/staging/rtl8712/usb_intf.c | 2 | ||||
-rw-r--r-- | fs/pstore/inode.c | 2 | ||||
-rw-r--r-- | fs/pstore/ram.c | 3 | ||||
-rw-r--r-- | fs/pstore/ram_core.c | 27 | ||||
-rw-r--r-- | include/linux/pstore_ram.h | 2 |
14 files changed, 82 insertions, 27 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 5bc8a476c15e..cfedf63cce15 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -219,6 +219,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale @@ -273,6 +274,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available What: /sys/.../iio:deviceX/in_voltageX_scale_available What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available What: /sys/.../iio:deviceX/out_voltageX_scale_available +What: /sys/.../iio:deviceX/out_altvoltageX_scale_available What: /sys/.../iio:deviceX/in_capacitance_scale_available KernelVersion: 2.635 Contact: linux-iio@vger.kernel.org @@ -298,14 +300,19 @@ Description: gives the 3dB frequency of the filter in Hz. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled, no bias etc.) output voltage for channel Y. The number must always be specified and unique if the output corresponds to a single channel. + While DAC like devices typically use out_voltage, + a continuous frequency generating device, such as + a DDS or PLL should use out_altvoltage. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: @@ -316,6 +323,8 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: @@ -330,6 +339,8 @@ Description: What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available +What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available +What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: @@ -338,6 +349,8 @@ Description: What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: @@ -346,6 +359,24 @@ Description: normal operation. Y may be suppressed if all outputs are controlled together. +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Output frequency for channel Y in Hz. The number must always be + specified and unique if the output corresponds to a single + channel. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Phase in radians of one frequency/clock output Y + (out_altvoltageY) relative to another frequency/clock output + (out_altvoltageZ) of the device X. The number must always be + specified and unique if the output corresponds to a single + channel. + What: /sys/bus/iio/devices/iio:deviceX/events KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 56eecefcec75..2ec93da41e2c 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -8,8 +8,7 @@ menuconfig IIO help The industrial I/O subsystem provides a unified framework for drivers for many different types of embedded sensors using a - number of different physical interfaces (i2c, spi, etc). See - Documentation/iio for more information. + number of different physical interfaces (i2c, spi, etc). if IIO diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 1ddd8861c71b..4f947e4377ef 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -661,7 +661,6 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev) * New channel registration method - relies on the fact a group does * not need to be initialized if it is name is NULL. */ - INIT_LIST_HEAD(&indio_dev->channel_attr_list); if (indio_dev->channels) for (i = 0; i < indio_dev->num_channels; i++) { ret = iio_device_add_channel_sysfs(indio_dev, @@ -725,12 +724,16 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev) static void iio_dev_release(struct device *device) { struct iio_dev *indio_dev = dev_to_iio_dev(device); - cdev_del(&indio_dev->chrdev); + if (indio_dev->chrdev.dev) + cdev_del(&indio_dev->chrdev); if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) iio_device_unregister_trigger_consumer(indio_dev); iio_device_unregister_eventset(indio_dev); iio_device_unregister_sysfs(indio_dev); iio_device_unregister_debugfs(indio_dev); + + ida_simple_remove(&iio_ida, indio_dev->id); + kfree(indio_dev); } static struct device_type iio_dev_type = { @@ -761,6 +764,7 @@ struct iio_dev *iio_device_alloc(int sizeof_priv) dev_set_drvdata(&dev->dev, (void *)dev); mutex_init(&dev->mlock); mutex_init(&dev->info_exist_lock); + INIT_LIST_HEAD(&dev->channel_attr_list); dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL); if (dev->id < 0) { @@ -778,10 +782,8 @@ EXPORT_SYMBOL(iio_device_alloc); void iio_device_free(struct iio_dev *dev) { - if (dev) { - ida_simple_remove(&iio_ida, dev->id); - kfree(dev); - } + if (dev) + put_device(&dev->dev); } EXPORT_SYMBOL(iio_device_free); @@ -902,7 +904,7 @@ void iio_device_unregister(struct iio_dev *indio_dev) mutex_lock(&indio_dev->info_exist_lock); indio_dev->info = NULL; mutex_unlock(&indio_dev->info_exist_lock); - device_unregister(&indio_dev->dev); + device_del(&indio_dev->dev); } EXPORT_SYMBOL(iio_device_unregister); subsys_initcall(iio_init); diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c index 1c3d6386ea36..aeac1caba3f9 100644 --- a/drivers/staging/comedi/drivers.c +++ b/drivers/staging/comedi/drivers.c @@ -30,6 +30,7 @@ #include <linux/pci.h> #include <linux/usb.h> #include <linux/errno.h> +#include <linux/kconfig.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/fcntl.h> @@ -981,6 +982,8 @@ void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver, } EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister); +#if IS_ENABLED(CONFIG_USB) + static int comedi_old_usb_auto_config(struct usb_interface *intf, struct comedi_driver *driver) { @@ -1043,3 +1046,5 @@ void comedi_usb_driver_unregister(struct comedi_driver *comedi_driver, comedi_driver_unregister(comedi_driver); } EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister); + +#endif diff --git a/drivers/staging/gdm72xx/netlink_k.c b/drivers/staging/gdm72xx/netlink_k.c index 292af0f7f451..51665132c61b 100644 --- a/drivers/staging/gdm72xx/netlink_k.c +++ b/drivers/staging/gdm72xx/netlink_k.c @@ -104,7 +104,7 @@ struct sock *netlink_init(int unit, void (*cb)(struct net_device *dev, u16 type, void netlink_exit(struct sock *sock) { - sock_release(sock->sk_socket); + netlink_kernel_release(sock); } int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len) diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt index 0338c7cd0a8b..f03fbd3bb454 100644 --- a/drivers/staging/iio/Documentation/device.txt +++ b/drivers/staging/iio/Documentation/device.txt @@ -29,8 +29,6 @@ Then fill in the following: * info->driver_module: Set to THIS_MODULE. Used to ensure correct ownership of various resources allocate by the core. - * info->num_interrupt_lines: - Number of event triggering hardware lines the device has. * info->event_attrs: Attributes used to enable / disable hardware events. * info->attrs: diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 2490dd25093b..8f1b3af02f29 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -13,6 +13,7 @@ config AD7291 config AD7298 tristate "Analog Devices AD7298 ADC driver" depends on SPI + select IIO_KFIFO_BUF if IIO_BUFFER help Say yes here to build support for Analog Devices AD7298 8 Channel ADC with temperature sensor. diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c index 10ab6dc823b9..a13afff2dfe6 100644 --- a/drivers/staging/iio/adc/ad7606_core.c +++ b/drivers/staging/iio/adc/ad7606_core.c @@ -235,7 +235,8 @@ static const struct attribute_group ad7606_attribute_group_range = { .indexed = 1, \ .channel = num, \ .address = num, \ - .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .scan_index = num, \ .scan_type = IIO_ST('s', 16, 16, 0), \ } diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c index 11acd4c35ed2..8c6ed3b0c6f6 100644 --- a/drivers/staging/omapdrm/omap_fbdev.c +++ b/drivers/staging/omapdrm/omap_fbdev.c @@ -208,7 +208,8 @@ static int omap_fbdev_create(struct drm_fb_helper *helper, */ ret = omap_gem_get_paddr(fbdev->bo, &paddr, true); if (ret) { - dev_err(dev->dev, "could not map (paddr)!\n"); + dev_err(dev->dev, + "could not map (paddr)! Skipping framebuffer alloc\n"); ret = -ENOMEM; goto fail; } @@ -388,8 +389,11 @@ void omap_fbdev_free(struct drm_device *dev) fbi = helper->fbdev; - unregister_framebuffer(fbi); - framebuffer_release(fbi); + /* only cleanup framebuffer if it is present */ + if (fbi) { + unregister_framebuffer(fbi); + framebuffer_release(fbi); + } drm_fb_helper_fini(helper); diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index 9bd18e2d0513..69f616c6964e 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -102,6 +102,8 @@ static struct usb_device_id rtl871x_usb_id_tbl[] = { /* - */ {USB_DEVICE(0x20F4, 0x646B)}, {USB_DEVICE(0x083A, 0xC512)}, + {USB_DEVICE(0x25D4, 0x4CA1)}, + {USB_DEVICE(0x25D4, 0x4CAB)}, /* RTL8191SU */ /* Realtek */ diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c index aeb19e68e086..11a2aa2a56c4 100644 --- a/fs/pstore/inode.c +++ b/fs/pstore/inode.c @@ -258,7 +258,7 @@ fail: return rc; } -int pstore_fill_super(struct super_block *sb, void *data, int silent) +static int pstore_fill_super(struct super_block *sb, void *data, int silent) { struct inode *inode; diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c index 9123cce28c1e..453030f9c5bc 100644 --- a/fs/pstore/ram.c +++ b/fs/pstore/ram.c @@ -106,6 +106,8 @@ static ssize_t ramoops_pstore_read(u64 *id, enum pstore_type_id *type, time->tv_sec = 0; time->tv_nsec = 0; + /* Update old/shadowed buffer. */ + persistent_ram_save_old(prz); size = persistent_ram_old_size(prz); *buf = kmalloc(size, GFP_KERNEL); if (*buf == NULL) @@ -184,6 +186,7 @@ static int ramoops_pstore_erase(enum pstore_type_id type, u64 id, return -EINVAL; persistent_ram_free_old(cxt->przs[id]); + persistent_ram_zap(cxt->przs[id]); return 0; } diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c index 31f8d184f3a0..c5fbdbbf81ac 100644 --- a/fs/pstore/ram_core.c +++ b/fs/pstore/ram_core.c @@ -250,23 +250,24 @@ static void notrace persistent_ram_update(struct persistent_ram_zone *prz, persistent_ram_update_ecc(prz, start, count); } -static void __init -persistent_ram_save_old(struct persistent_ram_zone *prz) +void persistent_ram_save_old(struct persistent_ram_zone *prz) { struct persistent_ram_buffer *buffer = prz->buffer; size_t size = buffer_size(prz); size_t start = buffer_start(prz); - char *dest; - persistent_ram_ecc_old(prz); + if (!size) + return; - dest = kmalloc(size, GFP_KERNEL); - if (dest == NULL) { + if (!prz->old_log) { + persistent_ram_ecc_old(prz); + prz->old_log = kmalloc(size, GFP_KERNEL); + } + if (!prz->old_log) { pr_err("persistent_ram: failed to allocate buffer\n"); return; } - prz->old_log = dest; prz->old_log_size = size; memcpy(prz->old_log, &buffer->data[start], size - start); memcpy(prz->old_log + size - start, &buffer->data[0], start); @@ -319,6 +320,13 @@ void persistent_ram_free_old(struct persistent_ram_zone *prz) prz->old_log_size = 0; } +void persistent_ram_zap(struct persistent_ram_zone *prz) +{ + atomic_set(&prz->buffer->start, 0); + atomic_set(&prz->buffer->size, 0); + persistent_ram_update_header_ecc(prz); +} + static void *persistent_ram_vmap(phys_addr_t start, size_t size) { struct page **pages; @@ -405,6 +413,7 @@ static int __init persistent_ram_post_init(struct persistent_ram_zone *prz, bool " size %zu, start %zu\n", buffer_size(prz), buffer_start(prz)); persistent_ram_save_old(prz); + return 0; } } else { pr_info("persistent_ram: no valid data in buffer" @@ -412,8 +421,7 @@ static int __init persistent_ram_post_init(struct persistent_ram_zone *prz, bool } prz->buffer->sig = PERSISTENT_RAM_SIG; - atomic_set(&prz->buffer->start, 0); - atomic_set(&prz->buffer->size, 0); + persistent_ram_zap(prz); return 0; } @@ -448,7 +456,6 @@ struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start, goto err; persistent_ram_post_init(prz, ecc); - persistent_ram_update_header_ecc(prz); return prz; err: diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h index 7ed7fd4dba49..3b823d49a85a 100644 --- a/include/linux/pstore_ram.h +++ b/include/linux/pstore_ram.h @@ -69,12 +69,14 @@ struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start, size_t size, bool ecc); void persistent_ram_free(struct persistent_ram_zone *prz); +void persistent_ram_zap(struct persistent_ram_zone *prz); struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev, bool ecc); int persistent_ram_write(struct persistent_ram_zone *prz, const void *s, unsigned int count); +void persistent_ram_save_old(struct persistent_ram_zone *prz); size_t persistent_ram_old_size(struct persistent_ram_zone *prz); void *persistent_ram_old(struct persistent_ram_zone *prz); void persistent_ram_free_old(struct persistent_ram_zone *prz); |