diff options
59 files changed, 4031 insertions, 984 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index e577196a12c0..4659fd952301 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -47,6 +47,7 @@ The full ID of peripheral types can be found below. 20 ASRC 21 ESAI 22 SSI Dual FIFO (needs firmware ver >= 2) + 23 Shared ASRC The third cell specifies the transfer priority as below. diff --git a/Documentation/devicetree/bindings/dma/mpc512x-dma.txt b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt new file mode 100644 index 000000000000..a6511df165c5 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt @@ -0,0 +1,29 @@ +* Freescale MPC512x and MPC8308 DMA Controller + +The DMA controller in Freescale MPC512x and MPC8308 SoCs can move +blocks of memory contents between memory and peripherals or +from memory to memory. + +Refer to "Generic DMA Controller and DMA request bindings" in +the dma/dma.txt file for a more detailed description of binding. + +Required properties: +- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma"; +- reg: should contain the DMA controller registers location and length; +- interrupt for the DMA controller: syntax of interrupt client node + is described in interrupt-controller/interrupts.txt file. +- #dma-cells: the length of the DMA specifier, must be <1>. + Each channel of this DMA controller has a peripheral request line, + the assignment is fixed in hardware. This one cell + in dmas property of a client device represents the channel number. + +Example: + + dma0: dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + #dma-cells = <1>; + }; + +DMA clients must use the format described in dma/dma.txt file. diff --git a/Documentation/devicetree/bindings/dma/nbpfaxi.txt b/Documentation/devicetree/bindings/dma/nbpfaxi.txt new file mode 100644 index 000000000000..d5e2522b9ec1 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/nbpfaxi.txt @@ -0,0 +1,61 @@ +* Renesas "Type-AXI" NBPFAXI* DMA controllers + +* DMA controller + +Required properties + +- compatible: must be one of + "renesas,nbpfaxi64dmac1b4" + "renesas,nbpfaxi64dmac1b8" + "renesas,nbpfaxi64dmac1b16" + "renesas,nbpfaxi64dmac4b4" + "renesas,nbpfaxi64dmac4b8" + "renesas,nbpfaxi64dmac4b16" + "renesas,nbpfaxi64dmac8b4" + "renesas,nbpfaxi64dmac8b8" + "renesas,nbpfaxi64dmac8b16" +- #dma-cells: must be 2: the first integer is a terminal number, to which this + slave is connected, the second one is flags. Flags is a bitmask + with the following bits defined: + +#define NBPF_SLAVE_RQ_HIGH 1 +#define NBPF_SLAVE_RQ_LOW 2 +#define NBPF_SLAVE_RQ_LEVEL 4 + +Optional properties: + +You can use dma-channels and dma-requests as described in dma.txt, although they +won't be used, this information is derived from the compatibility string. + +Example: + + dma: dma-controller@48000000 { + compatible = "renesas,nbpfaxi64dmac8b4"; + reg = <0x48000000 0x400>; + interrupts = <0 12 0x4 + 0 13 0x4 + 0 14 0x4 + 0 15 0x4 + 0 16 0x4 + 0 17 0x4 + 0 18 0x4 + 0 19 0x4>; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <8>; + }; + +* DMA client + +Required properties: + +dmas and dma-names are required, as described in dma.txt. + +Example: + +#include <dt-bindings/dma/nbpfaxi.h> + +... + dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL) + &dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; + dma-names = "rx", "tx"; diff --git a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt new file mode 100644 index 000000000000..9f1d750d76de --- /dev/null +++ b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt @@ -0,0 +1,29 @@ +* R-Car Audio DMAC peri peri Device Tree bindings + +Required properties: +- compatible: should be "renesas,rcar-audmapp" +- #dma-cells: should be <1>, see "dmas" property below + +Example: + audmapp: audio-dma-pp@0xec740000 { + compatible = "renesas,rcar-audmapp"; + #dma-cells = <1>; + + reg = <0 0xec740000 0 0x200>; + }; + + +* DMA client + +Required properties: +- dmas: a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs, + where SRS/DRS values are fixed handles, specified in the SoC + manual as the value that would be written into the PDMACHCR. +- dma-names: a list of DMA channel names, one per "dmas" entry + +Example: + + dmas = <&audmapp 0x2d00 + &audmapp 0x3700>; + dma-names = "src0_ssiu0", + "dvc0_ssiu0"; diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt new file mode 100644 index 000000000000..df0f48bcf75a --- /dev/null +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -0,0 +1,98 @@ +* Renesas R-Car DMA Controller Device Tree bindings + +Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA +controller instances named DMAC capable of serving multiple clients. Channels +can be dedicated to specific clients or shared between a large number of +clients. + +DMA clients are connected to the DMAC ports referenced by an 8-bit identifier +called MID/RID. + +Each DMA client is connected to one dedicated port of the DMAC, identified by +an 8-bit port number called the MID/RID. A DMA controller can thus serve up to +256 clients in total. When the number of hardware channels is lower than the +number of clients to be served, channels must be shared between multiple DMA +clients. The association of DMA clients to DMAC channels is fully dynamic and +not described in these device tree bindings. + +Required Properties: + +- compatible: must contain "renesas,rcar-dmac" + +- reg: base address and length of the registers block for the DMAC + +- interrupts: interrupt specifiers for the DMAC, one for each entry in + interrupt-names. +- interrupt-names: one entry per channel, named "ch%u", where %u is the + channel number ranging from zero to the number of channels minus one. + +- clock-names: "fck" for the functional clock +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: must contain "fck" for the functional clock. + +- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port + connected to the DMA client +- dma-channels: number of DMA channels + +Example: R8A7790 (R-Car H2) SYS-DMACs + + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index 1f5729f10621..95800ab37bb0 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -35,9 +35,11 @@ Required properties: Each dmas request consists of 4 cells: 1. A phandle pointing to the DMA controller - 2. Device Type + 2. Device signal number, the signal line for single and burst requests + connected from the device to the DMA40 engine 3. The DMA request line number (only when 'use fixed channel' is set) - 4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow] + 4. A 32bit mask specifying; mode, direction and endianness + [NB: This list will grow] 0x00000001: Mode: Logical channel when unset Physical channel when set @@ -54,6 +56,74 @@ Each dmas request consists of 4 cells: Normal priority when unset High priority when set +Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are +bidirectional, i.e. the same for RX and TX operations: + +0: SPI controller 0 +1: SD/MMC controller 0 (unused) +2: SD/MMC controller 1 (unused) +3: SD/MMC controller 2 (unused) +4: I2C port 1 +5: I2C port 3 +6: I2C port 2 +7: I2C port 4 +8: Synchronous Serial Port SSP0 +9: Synchronous Serial Port SSP1 +10: Multi-Channel Display Engine MCDE RX +11: UART port 2 +12: UART port 1 +13: UART port 0 +14: Multirate Serial Port MSP2 +15: I2C port 0 +16: USB OTG in/out endpoints 7 & 15 +17: USB OTG in/out endpoints 6 & 14 +18: USB OTG in/out endpoints 5 & 13 +19: USB OTG in/out endpoints 4 & 12 +20: SLIMbus or HSI channel 0 +21: SLIMbus or HSI channel 1 +22: SLIMbus or HSI channel 2 +23: SLIMbus or HSI channel 3 +24: Multimedia DSP SXA0 +25: Multimedia DSP SXA1 +26: Multimedia DSP SXA2 +27: Multimedia DSP SXA3 +28: SD/MM controller 2 +29: SD/MM controller 0 +30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2 +31: MSP port 0 or SLIMbus channel 0 +32: SD/MM controller 1 +33: SPI controller 2 +34: i2c3 RX2 TX2 +35: SPI controller 1 +36: USB OTG in/out endpoints 3 & 11 +37: USB OTG in/out endpoints 2 & 10 +38: USB OTG in/out endpoints 1 & 9 +39: USB OTG in/out endpoints 8 +40: SPI controller 3 +41: SD/MM controller 3 +42: SD/MM controller 4 +43: SD/MM controller 5 +44: Multimedia DSP SXA4 +45: Multimedia DSP SXA5 +46: SLIMbus channel 8 or Multimedia DSP SXA6 +47: SLIMbus channel 9 or Multimedia DSP SXA7 +48: Crypto Accelerator 1 +49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX +50: Hash Accelerator 1 TX +51: memcpy TX (to be used by the DMA driver for memcpy operations) +52: SLIMbus or HSI channel 4 +53: SLIMbus or HSI channel 5 +54: SLIMbus or HSI channel 6 +55: SLIMbus or HSI channel 7 +56: memcpy (to be used by the DMA driver for memcpy operations) +57: memcpy (to be used by the DMA driver for memcpy operations) +58: memcpy (to be used by the DMA driver for memcpy operations) +59: memcpy (to be used by the DMA driver for memcpy operations) +60: memcpy (to be used by the DMA driver for memcpy operations) +61: Crypto Accelerator 0 +62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX +63: Hash Accelerator 0 TX + Example: uart@80120000 { diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt new file mode 100644 index 000000000000..3e145c1675b1 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -0,0 +1,45 @@ +Allwinner A31 DMA Controller + +This driver follows the generic DMA bindings defined in dma.txt. + +Required properties: + +- compatible: Must be "allwinner,sun6i-a31-dma" +- reg: Should contain the registers base address and length +- interrupts: Should contain a reference to the interrupt used by this device +- clocks: Should contain a reference to the parent AHB clock +- resets: Should contain a reference to the reset controller asserting + this device in reset +- #dma-cells : Should be 1, a single cell holding a line request number + +Example: + dma: dma-controller@01c02000 { + compatible = "allwinner,sun6i-a31-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + +Clients: + +DMA clients connected to the A31 DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each +channel: a phandle plus one integer cells. +The two cells in order are: + +1. A phandle pointing to the DMA controller. +2. The port ID as specified in the datasheet + +Example: +spi2: spi@01c6a000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c6a000 0x1000>; + interrupts = <0 67 4>; + clocks = <&ahb1_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma 25>, <&dma 25>; + dma-names = "rx", "tx"; + resets = <&ahb1_rst 22>; +}; diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt index 879b6e31e2da..573e28ce9751 100644 --- a/Documentation/dmaengine.txt +++ b/Documentation/dmaengine.txt @@ -84,31 +84,32 @@ The slave DMA usage consists of following steps: the given transaction. Interface: - struct dma_async_tx_descriptor *(*chan->device->device_prep_slave_sg)( + struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_data_direction direction, unsigned long flags); - struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_cyclic)( + struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_data_direction direction); - struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( + struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma( struct dma_chan *chan, struct dma_interleaved_template *xt, unsigned long flags); The peripheral driver is expected to have mapped the scatterlist for the DMA operation prior to calling device_prep_slave_sg, and must keep the scatterlist mapped until the DMA operation has completed. - The scatterlist must be mapped using the DMA struct device. So, - normal setup should look like this: + The scatterlist must be mapped using the DMA struct device. + If a mapping needs to be synchronized later, dma_sync_*_for_*() must be + called using the DMA struct device, too. + So, normal setup should look like this: nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len); if (nr_sg == 0) /* error */ - desc = chan->device->device_prep_slave_sg(chan, sgl, nr_sg, - direction, flags); + desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags); Once a descriptor has been obtained, the callback information can be added and the descriptor must then be submitted. Some DMA engine @@ -188,7 +189,7 @@ Further APIs: description of this API. This can be used in conjunction with dma_async_is_complete() and - the cookie returned from 'descriptor->submit()' to check for + the cookie returned from dmaengine_submit() to check for completion of a specific DMA transaction. Note: diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 485be42519b9..88099175fc56 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1414,6 +1414,34 @@ void edma_clear_event(unsigned channel) } EXPORT_SYMBOL(edma_clear_event); +/* + * edma_assign_channel_eventq - move given channel to desired eventq + * Arguments: + * channel - channel number + * eventq_no - queue to move the channel + * + * Can be used to move a channel to a selected event queue. + */ +void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no) +{ + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel >= edma_cc[ctlr]->num_channels) + return; + + /* default to low priority queue */ + if (eventq_no == EVENTQ_DEFAULT) + eventq_no = edma_cc[ctlr]->default_queue; + if (eventq_no >= edma_cc[ctlr]->num_tc) + return; + + map_dmach_queue(ctlr, channel, eventq_no); +} +EXPORT_SYMBOL(edma_assign_channel_eventq); + static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, struct edma *edma_cc) { @@ -1470,7 +1498,8 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, queue_priority_map[i][1] = -1; pdata->queue_priority_mapping = queue_priority_map; - pdata->default_queue = 0; + /* Default queue has the lowest priority */ + pdata->default_queue = i - 1; return 0; } diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi index 2c0e1552d20b..7f9d14f5c4da 100644 --- a/arch/powerpc/boot/dts/mpc5121.dtsi +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -498,6 +498,7 @@ compatible = "fsl,mpc5121-dma"; reg = <0x14000 0x1800>; interrupts = <65 0x8>; + #dma-cells = <1>; }; }; diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index b22565623142..afde2a7d3eb3 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -25,7 +25,7 @@ * Define the default configuration for dual address memory-memory transfer. * The 0x400 value represents auto-request, external->external. */ -#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_INDEX2VAL(XMIT_SZ_32BIT)) +#define RS_DUAL (DM_INC | SM_INC | RS_AUTO | TS_INDEX2VAL(XMIT_SZ_32BIT)) static unsigned long dma_find_base(unsigned int chan) { diff --git a/arch/sh/include/asm/dma-register.h b/arch/sh/include/asm/dma-register.h index 51cd78feacff..c757b47e6b64 100644 --- a/arch/sh/include/asm/dma-register.h +++ b/arch/sh/include/asm/dma-register.h @@ -13,17 +13,17 @@ #ifndef DMA_REGISTER_H #define DMA_REGISTER_H -/* DMA register */ -#define SAR 0x00 -#define DAR 0x04 -#define TCR 0x08 -#define CHCR 0x0C -#define DMAOR 0x40 +/* DMA registers */ +#define SAR 0x00 /* Source Address Register */ +#define DAR 0x04 /* Destination Address Register */ +#define TCR 0x08 /* Transfer Count Register */ +#define CHCR 0x0C /* Channel Control Register */ +#define DMAOR 0x40 /* DMA Operation Register */ /* DMAOR definitions */ -#define DMAOR_AE 0x00000004 +#define DMAOR_AE 0x00000004 /* Address Error Flag */ #define DMAOR_NMIF 0x00000002 -#define DMAOR_DME 0x00000001 +#define DMAOR_DME 0x00000001 /* DMA Master Enable */ /* Definitions for the SuperH DMAC */ #define REQ_L 0x00000000 @@ -34,18 +34,20 @@ #define ACK_W 0x00020000 #define ACK_H 0x00000000 #define ACK_L 0x00010000 -#define DM_INC 0x00004000 -#define DM_DEC 0x00008000 -#define DM_FIX 0x0000c000 -#define SM_INC 0x00001000 -#define SM_DEC 0x00002000 -#define SM_FIX 0x00003000 +#define DM_INC 0x00004000 /* Destination addresses are incremented */ +#define DM_DEC 0x00008000 /* Destination addresses are decremented */ +#define DM_FIX 0x0000c000 /* Destination address is fixed */ +#define SM_INC 0x00001000 /* Source addresses are incremented */ +#define SM_DEC 0x00002000 /* Source addresses are decremented */ +#define SM_FIX 0x00003000 /* Source address is fixed */ #define RS_IN 0x00000200 #define RS_OUT 0x00000300 +#define RS_AUTO 0x00000400 /* Auto Request */ +#define RS_ERS 0x00000800 /* DMA extended resource selector */ #define TS_BLK 0x00000040 #define TM_BUR 0x00000020 -#define CHCR_DE 0x00000001 -#define CHCR_TE 0x00000002 -#define CHCR_IE 0x00000004 +#define CHCR_DE 0x00000001 /* DMA Enable */ +#define CHCR_TE 0x00000002 /* Transfer End Flag */ +#define CHCR_IE 0x00000004 /* Interrupt Enable */ #endif diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 57f83a92a505..7aa733307afc 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -30,62 +30,62 @@ static const struct sh_dmae_slave_config sh7722_dmae_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF0_TX, .addr = 0xffe0000c, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x21, }, { .slave_id = SHDMA_SLAVE_SCIF0_RX, .addr = 0xffe00014, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, { .slave_id = SHDMA_SLAVE_SCIF1_TX, .addr = 0xffe1000c, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x25, }, { .slave_id = SHDMA_SLAVE_SCIF1_RX, .addr = 0xffe10014, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x26, }, { .slave_id = SHDMA_SLAVE_SCIF2_TX, .addr = 0xffe2000c, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x29, }, { .slave_id = SHDMA_SLAVE_SCIF2_RX, .addr = 0xffe20014, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, { .slave_id = SHDMA_SLAVE_SIUA_TX, .addr = 0xa454c098, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xb1, }, { .slave_id = SHDMA_SLAVE_SIUA_RX, .addr = 0xa454c090, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xb2, }, { .slave_id = SHDMA_SLAVE_SIUB_TX, .addr = 0xa454c09c, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xb5, }, { .slave_id = SHDMA_SLAVE_SIUB_RX, .addr = 0xa454c094, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xb6, }, { .slave_id = SHDMA_SLAVE_SDHI0_TX, .addr = 0x04ce0030, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xc1, }, { .slave_id = SHDMA_SLAVE_SDHI0_RX, .addr = 0x04ce0030, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xc2, }, }; diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index b9e84b1d3aa7..ea5780b3c7f6 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -36,122 +36,122 @@ static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF0_TX, .addr = 0xffe0000c, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x21, }, { .slave_id = SHDMA_SLAVE_SCIF0_RX, .addr = 0xffe00014, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, { .slave_id = SHDMA_SLAVE_SCIF1_TX, .addr = 0xffe1000c, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x25, }, { .slave_id = SHDMA_SLAVE_SCIF1_RX, .addr = 0xffe10014, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x26, }, { .slave_id = SHDMA_SLAVE_SCIF2_TX, .addr = 0xffe2000c, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x29, }, { .slave_id = SHDMA_SLAVE_SCIF2_RX, .addr = 0xffe20014, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, { .slave_id = SHDMA_SLAVE_SCIF3_TX, .addr = 0xa4e30020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2d, }, { .slave_id = SHDMA_SLAVE_SCIF3_RX, .addr = 0xa4e30024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2e, }, { .slave_id = SHDMA_SLAVE_SCIF4_TX, .addr = 0xa4e40020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x31, }, { .slave_id = SHDMA_SLAVE_SCIF4_RX, .addr = 0xa4e40024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x32, }, { .slave_id = SHDMA_SLAVE_SCIF5_TX, .addr = 0xa4e50020, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x35, }, { .slave_id = SHDMA_SLAVE_SCIF5_RX, .addr = 0xa4e50024, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x36, }, { .slave_id = SHDMA_SLAVE_USB0D0_TX, .addr = 0xA4D80100, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0x73, }, { .slave_id = SHDMA_SLAVE_USB0D0_RX, .addr = 0xA4D80100, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0x73, }, { .slave_id = SHDMA_SLAVE_USB0D1_TX, .addr = 0xA4D80120, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0x77, }, { .slave_id = SHDMA_SLAVE_USB0D1_RX, .addr = 0xA4D80120, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0x77, }, { .slave_id = SHDMA_SLAVE_USB1D0_TX, .addr = 0xA4D90100, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xab, }, { .slave_id = SHDMA_SLAVE_USB1D0_RX, .addr = 0xA4D90100, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xab, }, { .slave_id = SHDMA_SLAVE_USB1D1_TX, .addr = 0xA4D90120, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xaf, }, { .slave_id = SHDMA_SLAVE_USB1D1_RX, .addr = 0xA4D90120, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xaf, }, { .slave_id = SHDMA_SLAVE_SDHI0_TX, .addr = 0x04ce0030, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xc1, }, { .slave_id = SHDMA_SLAVE_SDHI0_RX, .addr = 0x04ce0030, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xc2, }, { .slave_id = SHDMA_SLAVE_SDHI1_TX, .addr = 0x04cf0030, - .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xc9, }, { .slave_id = SHDMA_SLAVE_SDHI1_RX, .addr = 0x04cf0030, - .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), + .chcr = DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xca, }, }; diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index 7b24ec4b409a..18bcd70cd813 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -123,28 +123,28 @@ static const struct sh_dmae_slave_config sh7757_dmae0_slaves[] = { { .slave_id = SHDMA_SLAVE_SDHI_TX, .addr = 0x1fe50030, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xc5, }, { .slave_id = SHDMA_SLAVE_SDHI_RX, .addr = 0x1fe50030, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xc6, }, { .slave_id = SHDMA_SLAVE_MMCIF_TX, .addr = 0x1fcb0034, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xd3, }, { .slave_id = SHDMA_SLAVE_MMCIF_RX, .addr = 0x1fcb0034, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_32BIT), .mid_rid = 0xd7, }, @@ -154,56 +154,56 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF2_TX, .addr = 0x1f4b000c, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x21, }, { .slave_id = SHDMA_SLAVE_SCIF2_RX, .addr = 0x1f4b0014, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, { .slave_id = SHDMA_SLAVE_SCIF3_TX, .addr = 0x1f4c000c, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x29, }, { .slave_id = SHDMA_SLAVE_SCIF3_RX, .addr = 0x1f4c0014, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, { .slave_id = SHDMA_SLAVE_SCIF4_TX, .addr = 0x1f4d000c, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x41, }, { .slave_id = SHDMA_SLAVE_SCIF4_RX, .addr = 0x1f4d0014, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, { .slave_id = SHDMA_SLAVE_RSPI_TX, .addr = 0xfe480004, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xc1, }, { .slave_id = SHDMA_SLAVE_RSPI_RX, .addr = 0xfe480004, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_16BIT), .mid_rid = 0xc2, }, @@ -213,70 +213,70 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC0_TX, .addr = 0x1e500012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x21, }, { .slave_id = SHDMA_SLAVE_RIIC0_RX, .addr = 0x1e500013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, { .slave_id = SHDMA_SLAVE_RIIC1_TX, .addr = 0x1e510012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x29, }, { .slave_id = SHDMA_SLAVE_RIIC1_RX, .addr = 0x1e510013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, { .slave_id = SHDMA_SLAVE_RIIC2_TX, .addr = 0x1e520012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xa1, }, { .slave_id = SHDMA_SLAVE_RIIC2_RX, .addr = 0x1e520013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xa2, }, { .slave_id = SHDMA_SLAVE_RIIC3_TX, .addr = 0x1e530012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xa9, }, { .slave_id = SHDMA_SLAVE_RIIC3_RX, .addr = 0x1e530013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xaf, }, { .slave_id = SHDMA_SLAVE_RIIC4_TX, .addr = 0x1e540012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xc5, }, { .slave_id = SHDMA_SLAVE_RIIC4_RX, .addr = 0x1e540013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xc6, }, @@ -286,70 +286,70 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC5_TX, .addr = 0x1e550012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x21, }, { .slave_id = SHDMA_SLAVE_RIIC5_RX, .addr = 0x1e550013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, { .slave_id = SHDMA_SLAVE_RIIC6_TX, .addr = 0x1e560012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x29, }, { .slave_id = SHDMA_SLAVE_RIIC6_RX, .addr = 0x1e560013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, { .slave_id = SHDMA_SLAVE_RIIC7_TX, .addr = 0x1e570012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x41, }, { .slave_id = SHDMA_SLAVE_RIIC7_RX, .addr = 0x1e570013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, { .slave_id = SHDMA_SLAVE_RIIC8_TX, .addr = 0x1e580012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x45, }, { .slave_id = SHDMA_SLAVE_RIIC8_RX, .addr = 0x1e580013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x46, }, { .slave_id = SHDMA_SLAVE_RIIC9_TX, .addr = 0x1e590012, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = SM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x51, }, { .slave_id = SHDMA_SLAVE_RIIC9_RX, .addr = 0x1e590013, - .chcr = DM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | RS_ERS | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x52, }, diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 8f6afbf9ba54..9b1ea0ef59af 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -393,6 +393,22 @@ config XILINX_VDMA channels, Memory Mapped to Stream (MM2S) and Stream to Memory Mapped (S2MM) for the data transfers. +config DMA_SUN6I + tristate "Allwinner A31 SoCs DMA support" + depends on MACH_SUN6I || COMPILE_TEST + depends on RESET_CONTROLLER + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Support for the DMA engine for Allwinner A31 SoCs. + +config NBPFAXI_DMA + tristate "Renesas Type-AXI NBPF DMA support" + select DMA_ENGINE + depends on ARM || COMPILE_TEST + help + Support for "Type-AXI" NBPF DMA IPs from Renesas + config DMA_ENGINE bool @@ -406,6 +422,7 @@ config DMA_ACPI config DMA_OF def_bool y depends on OF + select DMA_ENGINE comment "DMA Clients" depends on DMA_ENGINE diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index bd9e7fa928bd..c6adb925f0b9 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -1,5 +1,5 @@ -ccflags-$(CONFIG_DMADEVICES_DEBUG) := -DDEBUG -ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG +subdir-ccflags-$(CONFIG_DMADEVICES_DEBUG) := -DDEBUG +subdir-ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG obj-$(CONFIG_DMA_ENGINE) += dmaengine.o obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o @@ -48,3 +48,5 @@ obj-$(CONFIG_FSL_EDMA) += fsl-edma.o obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o obj-y += xilinx/ obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o +obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o +obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o diff --git a/drivers/dma/TODO b/drivers/dma/TODO index 734ed0206cd5..b8045cd42ee1 100644 --- a/drivers/dma/TODO +++ b/drivers/dma/TODO @@ -7,7 +7,6 @@ TODO for slave dma - imx-dma - imx-sdma - mxs-dma.c - - dw_dmac - intel_mid_dma 4. Check other subsystems for dma drivers and merge/move to dmaengine 5. Remove dma_slave_config's dma direction. diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 8114731a1c62..e34024b000a4 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1040,7 +1040,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (early_bytes) { dev_vdbg(&pl08x->adev->dev, - "%s byte width LLIs (remain 0x%08x)\n", + "%s byte width LLIs (remain 0x%08zx)\n", __func__, bd.remainder); prep_byte_width_lli(pl08x, &bd, &cctl, early_bytes, num_llis++, &total_bytes); @@ -1653,7 +1653,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; @@ -1662,7 +1662,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic( dma_addr_t slave_addr; dev_dbg(&pl08x->adev->dev, - "%s prepare cyclic transaction of %d/%d bytes %s %s\n", + "%s prepare cyclic transaction of %zd/%zd bytes %s %s\n", __func__, period_len, buf_len, direction == DMA_MEM_TO_DEV ? "to" : "from", plchan->name); diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index c13a3bb0f594..ca9dd2613283 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -294,14 +294,16 @@ static int atc_get_bytes_left(struct dma_chan *chan) ret = -EINVAL; goto out; } - atchan->remain_desc -= (desc_cur->lli.ctrla & ATC_BTSIZE_MAX) - << (desc_first->tx_width); - if (atchan->remain_desc < 0) { + + count = (desc_cur->lli.ctrla & ATC_BTSIZE_MAX) + << desc_first->tx_width; + if (atchan->remain_desc < count) { ret = -EINVAL; goto out; - } else { - ret = atchan->remain_desc; } + + atchan->remain_desc -= count; + ret = atchan->remain_desc; } else { /* * Get residual bytes when current @@ -893,12 +895,11 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc, * @period_len: number of bytes for each period * @direction: transfer direction, to or from device * @flags: tx descriptor status flags - * @context: transfer context (ignored) */ static struct dma_async_tx_descriptor * atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma_slave *atslave = chan->private; diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c index a03602164e3e..68007974961a 100644 --- a/drivers/dma/bcm2835-dma.c +++ b/drivers/dma/bcm2835-dma.c @@ -335,7 +335,7 @@ static void bcm2835_dma_issue_pending(struct dma_chan *chan) static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); enum dma_slave_buswidth dev_width; diff --git a/drivers/dma/dma-jz4740.c b/drivers/dma/dma-jz4740.c index 94c380f07538..6a9d89c93b1f 100644 --- a/drivers/dma/dma-jz4740.c +++ b/drivers/dma/dma-jz4740.c @@ -433,7 +433,7 @@ static struct dma_async_tx_descriptor *jz4740_dma_prep_slave_sg( static struct dma_async_tx_descriptor *jz4740_dma_prep_dma_cyclic( struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c); struct jz4740_dma_desc *desc; @@ -614,4 +614,4 @@ module_platform_driver(jz4740_dma_driver); MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); MODULE_DESCRIPTION("JZ4740 DMA driver"); -MODULE_LICENSE("GPLv2"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index a27ded53ab4f..1af731b83b3f 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -279,6 +279,19 @@ static void dwc_dostart(struct dw_dma_chan *dwc, struct dw_desc *first) channel_set_bit(dw, CH_EN, dwc->mask); } +static void dwc_dostart_first_queued(struct dw_dma_chan *dwc) +{ + struct dw_desc *desc; + + if (list_empty(&dwc->queue)) + return; + + list_move(dwc->queue.next, &dwc->active_list); + desc = dwc_first_active(dwc); + dev_vdbg(chan2dev(&dwc->chan), "%s: started %u\n", __func__, desc->txd.cookie); + dwc_dostart(dwc, desc); +} + /*----------------------------------------------------------------------*/ static void @@ -335,10 +348,7 @@ static void dwc_complete_all(struct dw_dma *dw, struct dw_dma_chan *dwc) * the completed ones. */ list_splice_init(&dwc->active_list, &list); - if (!list_empty(&dwc->queue)) { - list_move(dwc->queue.next, &dwc->active_list); - dwc_dostart(dwc, dwc_first_active(dwc)); - } + dwc_dostart_first_queued(dwc); spin_unlock_irqrestore(&dwc->lock, flags); @@ -467,10 +477,7 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) /* Try to continue after resetting the channel... */ dwc_chan_disable(dw, dwc); - if (!list_empty(&dwc->queue)) { - list_move(dwc->queue.next, &dwc->active_list); - dwc_dostart(dwc, dwc_first_active(dwc)); - } + dwc_dostart_first_queued(dwc); spin_unlock_irqrestore(&dwc->lock, flags); } @@ -677,17 +684,9 @@ static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx) * possible, perhaps even appending to those already submitted * for DMA. But this is hard to do in a race-free manner. */ - if (list_empty(&dwc->active_list)) { - dev_vdbg(chan2dev(tx->chan), "%s: started %u\n", __func__, - desc->txd.cookie); - list_add_tail(&desc->desc_node, &dwc->active_list); - dwc_dostart(dwc, dwc_first_active(dwc)); - } else { - dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n", __func__, - desc->txd.cookie); - list_add_tail(&desc->desc_node, &dwc->queue); - } + dev_vdbg(chan2dev(tx->chan), "%s: queued %u\n", __func__, desc->txd.cookie); + list_add_tail(&desc->desc_node, &dwc->queue); spin_unlock_irqrestore(&dwc->lock, flags); @@ -1092,9 +1091,12 @@ dwc_tx_status(struct dma_chan *chan, static void dwc_issue_pending(struct dma_chan *chan) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); + unsigned long flags; - if (!list_empty(&dwc->queue)) - dwc_scan_descriptors(to_dw_dma(chan->device), dwc); + spin_lock_irqsave(&dwc->lock, flags); + if (list_empty(&dwc->active_list)) + dwc_dostart_first_queued(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); } static int dwc_alloc_chan_resources(struct dma_chan *chan) diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index b512caf46944..7b65633f495e 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spinlock.h> +#include <linux/of.h> #include <linux/platform_data/edma.h> @@ -256,8 +257,13 @@ static int edma_terminate_all(struct edma_chan *echan) * echan->edesc is NULL and exit.) */ if (echan->edesc) { + int cyclic = echan->edesc->cyclic; echan->edesc = NULL; edma_stop(echan->ch_num); + /* Move the cyclic channel back to default queue */ + if (cyclic) + edma_assign_channel_eventq(echan->ch_num, + EVENTQ_DEFAULT); } vchan_get_all_descriptors(&echan->vchan, &head); @@ -592,7 +598,7 @@ struct dma_async_tx_descriptor *edma_prep_dma_memcpy( static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long tx_flags, void *context) + unsigned long tx_flags) { struct edma_chan *echan = to_edma_chan(chan); struct device *dev = chan->device->dev; @@ -718,12 +724,15 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( edesc->absync = ret; /* - * Enable interrupts for every period because callback - * has to be called for every period. + * Enable period interrupt only if it is requested */ - edesc->pset[i].param.opt |= TCINTEN; + if (tx_flags & DMA_PREP_INTERRUPT) + edesc->pset[i].param.opt |= TCINTEN; } + /* Place the cyclic channel to highest priority queue */ + edma_assign_channel_eventq(echan->ch_num, EVENTQ_0); + return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags); } @@ -993,7 +1002,7 @@ static int edma_dma_device_slave_caps(struct dma_chan *dchan, caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); caps->cmd_pause = true; caps->cmd_terminate = true; - caps->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR; + caps->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; return 0; } @@ -1040,7 +1049,7 @@ static int edma_probe(struct platform_device *pdev) ecc->dummy_slot = edma_alloc_slot(ecc->ctlr, EDMA_SLOT_ANY); if (ecc->dummy_slot < 0) { dev_err(&pdev->dev, "Can't allocate PaRAM dummy slot\n"); - return -EIO; + return ecc->dummy_slot; } dma_cap_zero(ecc->dma_slave.cap_mask); @@ -1125,7 +1134,7 @@ static int edma_init(void) } } - if (EDMA_CTLRS == 2) { + if (!of_have_populated_dt() && EDMA_CTLRS == 2) { pdev1 = platform_device_register_full(&edma_dev_info1); if (IS_ERR(pdev1)) { platform_driver_unregister(&edma_driver); diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index cb4bf682a708..7650470196c4 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -1092,7 +1092,6 @@ fail: * @period_len: length of a single period * @dir: direction of the operation * @flags: tx descriptor status flags - * @context: operation context (ignored) * * Prepares a descriptor for cyclic DMA operation. This means that once the * descriptor is submitted, we will be submitting in a @period_len sized @@ -1105,8 +1104,7 @@ fail: static struct dma_async_tx_descriptor * ep93xx_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction dir, unsigned long flags, - void *context) + enum dma_transfer_direction dir, unsigned long flags) { struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); struct ep93xx_dma_desc *desc, *first; diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c index b396a7fb53ab..3c5711d5fe97 100644 --- a/drivers/dma/fsl-edma.c +++ b/drivers/dma/fsl-edma.c @@ -248,11 +248,12 @@ static void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan, unsigned int slot, bool enable) { u32 ch = fsl_chan->vchan.chan.chan_id; - void __iomem *muxaddr = fsl_chan->edma->muxbase[ch / DMAMUX_NR]; + void __iomem *muxaddr; unsigned chans_per_mux, ch_off; chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR; ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux; + muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux]; if (enable) edma_writeb(fsl_chan->edma, @@ -516,7 +517,7 @@ err: static struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan); struct fsl_edma_desc *fsl_desc; @@ -724,6 +725,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec, { struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data; struct dma_chan *chan, *_chan; + unsigned long chans_per_mux = fsl_edma->n_chans / DMAMUX_NR; if (dma_spec->args_count != 2) return NULL; @@ -732,7 +734,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec, list_for_each_entry_safe(chan, _chan, &fsl_edma->dma_dev.channels, device_node) { if (chan->client_count) continue; - if ((chan->chan_id / DMAMUX_NR) == dma_spec->args[0]) { + if ((chan->chan_id / chans_per_mux) == dma_spec->args[0]) { chan = dma_get_slave_channel(chan); if (chan) { chan->device->privatecnt++; diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index e0fec68aed25..d5d6885ab341 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -396,10 +396,17 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) struct fsldma_chan *chan = to_fsl_chan(tx->chan); struct fsl_desc_sw *desc = tx_to_fsl_desc(tx); struct fsl_desc_sw *child; - unsigned long flags; dma_cookie_t cookie = -EINVAL; - spin_lock_irqsave(&chan->desc_lock, flags); + spin_lock_bh(&chan->desc_lock); + +#ifdef CONFIG_PM + if (unlikely(chan->pm_state != RUNNING)) { + chan_dbg(chan, "cannot submit due to suspend\n"); + spin_unlock_bh(&chan->desc_lock); + return -1; + } +#endif /* * assign cookies to all of the software descriptors @@ -412,7 +419,7 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) /* put this transaction onto the tail of the pending queue */ append_ld_queue(chan, desc); - spin_unlock_irqrestore(&chan->desc_lock, flags); + spin_unlock_bh(&chan->desc_lock); return cookie; } @@ -459,6 +466,88 @@ static struct fsl_desc_sw *fsl_dma_alloc_descriptor(struct fsldma_chan *chan) } /** + * fsldma_clean_completed_descriptor - free all descriptors which + * has been completed and acked + * @chan: Freescale DMA channel + * + * This function is used on all completed and acked descriptors. + * All descriptors should only be freed in this function. + */ +static void fsldma_clean_completed_descriptor(struct fsldma_chan *chan) +{ + struct fsl_desc_sw *desc, *_desc; + + /* Run the callback for each descriptor, in order */ + list_for_each_entry_safe(desc, _desc, &chan->ld_completed, node) + if (async_tx_test_ack(&desc->async_tx)) + fsl_dma_free_descriptor(chan, desc); +} + +/** + * fsldma_run_tx_complete_actions - cleanup a single link descriptor + * @chan: Freescale DMA channel + * @desc: descriptor to cleanup and free + * @cookie: Freescale DMA transaction identifier + * + * This function is used on a descriptor which has been executed by the DMA + * controller. It will run any callbacks, submit any dependencies. + */ +static dma_cookie_t fsldma_run_tx_complete_actions(struct fsldma_chan *chan, + struct fsl_desc_sw *desc, dma_cookie_t cookie) +{ + struct dma_async_tx_descriptor *txd = &desc->async_tx; + dma_cookie_t ret = cookie; + + BUG_ON(txd->cookie < 0); + + if (txd->cookie > 0) { + ret = txd->cookie; + + /* Run the link descriptor callback function */ + if (txd->callback) { + chan_dbg(chan, "LD %p callback\n", desc); + txd->callback(txd->callback_param); + } + } + + /* Run any dependencies */ + dma_run_dependencies(txd); + + return ret; +} + +/** + * fsldma_clean_running_descriptor - move the completed descriptor from + * ld_running to ld_completed + * @chan: Freescale DMA channel + * @desc: the descriptor which is completed + * + * Free the descriptor directly if acked by async_tx api, or move it to + * queue ld_completed. + */ +static void fsldma_clean_running_descriptor(struct fsldma_chan *chan, + struct fsl_desc_sw *desc) +{ + /* Remove from the list of transactions */ + list_del(&desc->node); + + /* + * the client is allowed to attach dependent operations + * until 'ack' is set + */ + if (!async_tx_test_ack(&desc->async_tx)) { + /* + * Move this descriptor to the list of descriptors which is + * completed, but still awaiting the 'ack' bit to be set. + */ + list_add_tail(&desc->node, &chan->ld_completed); + return; + } + + dma_pool_free(chan->desc_pool, desc, desc->async_tx.phys); +} + +/** * fsl_chan_xfer_ld_queue - transfer any pending transactions * @chan : Freescale DMA channel * @@ -526,31 +615,58 @@ static void fsl_chan_xfer_ld_queue(struct fsldma_chan *chan) } /** - * fsldma_cleanup_descriptor - cleanup and free a single link descriptor + * fsldma_cleanup_descriptors - cleanup link descriptors which are completed + * and move them to ld_completed to free until flag 'ack' is set * @chan: Freescale DMA channel - * @desc: descriptor to cleanup and free * - * This function is used on a descriptor which has been executed by the DMA - * controller. It will run any callbacks, submit any dependencies, and then - * free the descriptor. + * This function is used on descriptors which have been executed by the DMA + * controller. It will run any callbacks, submit any dependencies, then + * free these descriptors if flag 'ack' is set. */ -static void fsldma_cleanup_descriptor(struct fsldma_chan *chan, - struct fsl_desc_sw *desc) +static void fsldma_cleanup_descriptors(struct fsldma_chan *chan) { - struct dma_async_tx_descriptor *txd = &desc->async_tx; + struct fsl_desc_sw *desc, *_desc; + dma_cookie_t cookie = 0; + dma_addr_t curr_phys = get_cdar(chan); + int seen_current = 0; + + fsldma_clean_completed_descriptor(chan); + + /* Run the callback for each descriptor, in order */ + list_for_each_entry_safe(desc, _desc, &chan->ld_running, node) { + /* + * do not advance past the current descriptor loaded into the + * hardware channel, subsequent descriptors are either in + * process or have not been submitted + */ + if (seen_current) + break; + + /* + * stop the search if we reach the current descriptor and the + * channel is busy + */ + if (desc->async_tx.phys == curr_phys) { + seen_current = 1; + if (!dma_is_idle(chan)) + break; + } + + cookie = fsldma_run_tx_complete_actions(chan, desc, cookie); - /* Run the link descriptor callback function */ - if (txd->callback) { - chan_dbg(chan, "LD %p callback\n", desc); - txd->callback(txd->callback_param); + fsldma_clean_running_descriptor(chan, desc); } - /* Run any dependencies */ - dma_run_dependencies(txd); + /* + * Start any pending transactions automatically + * + * In the ideal case, we keep the DMA controller busy while we go + * ahead and free the descriptors below. + */ + fsl_chan_xfer_ld_queue(chan); - dma_descriptor_unmap(txd); - chan_dbg(chan, "LD %p free\n", desc); - dma_pool_free(chan->desc_pool, desc, txd->phys); + if (cookie > 0) + chan->common.completed_cookie = cookie; } /** @@ -617,13 +733,14 @@ static void fsldma_free_desc_list_reverse(struct fsldma_chan *chan, static void fsl_dma_free_chan_resources(struct dma_chan *dchan) { struct fsldma_chan *chan = to_fsl_chan(dchan); - unsigned long flags; chan_dbg(chan, "free all channel resources\n"); - spin_lock_irqsave(&chan->desc_lock, flags); + spin_lock_bh(&chan->desc_lock); + fsldma_cleanup_descriptors(chan); fsldma_free_desc_list(chan, &chan->ld_pending); fsldma_free_desc_list(chan, &chan->ld_running); - spin_unlock_irqrestore(&chan->desc_lock, flags); + fsldma_free_desc_list(chan, &chan->ld_completed); + spin_unlock_bh(&chan->desc_lock); dma_pool_destroy(chan->desc_pool); chan->desc_pool = NULL; @@ -842,7 +959,6 @@ static int fsl_dma_device_control(struct dma_chan *dchan, { struct dma_slave_config *config; struct fsldma_chan *chan; - unsigned long flags; int size; if (!dchan) @@ -852,7 +968,7 @@ static int fsl_dma_device_control(struct dma_chan *dchan, switch (cmd) { case DMA_TERMINATE_ALL: - spin_lock_irqsave(&chan->desc_lock, flags); + spin_lock_bh(&chan->desc_lock); /* Halt the DMA engine */ dma_halt(chan); @@ -860,9 +976,10 @@ static int fsl_dma_device_control(struct dma_chan *dchan, /* Remove and free all of the descriptors in the LD queue */ fsldma_free_desc_list(chan, &chan->ld_pending); fsldma_free_desc_list(chan, &chan->ld_running); + fsldma_free_desc_list(chan, &chan->ld_completed); chan->idle = true; - spin_unlock_irqrestore(&chan->desc_lock, flags); + spin_unlock_bh(&chan->desc_lock); return 0; case DMA_SLAVE_CONFIG: @@ -904,11 +1021,10 @@ static int fsl_dma_device_control(struct dma_chan *dchan, static void fsl_dma_memcpy_issue_pending(struct dma_chan *dchan) { struct fsldma_chan *chan = to_fsl_chan(dchan); - unsigned long flags; - spin_lock_irqsave(&chan->desc_lock, flags); + spin_lock_bh(&chan->desc_lock); fsl_chan_xfer_ld_queue(chan); - spin_unlock_irqrestore(&chan->desc_lock, flags); + spin_unlock_bh(&chan->desc_lock); } /** @@ -919,6 +1035,17 @@ static enum dma_status fsl_tx_status(struct dma_chan *dchan, dma_cookie_t cookie, struct dma_tx_state *txstate) { + struct fsldma_chan *chan = to_fsl_chan(dchan); + enum dma_status ret; + + ret = dma_cookie_status(dchan, cookie, txstate); + if (ret == DMA_COMPLETE) + return ret; + + spin_lock_bh(&chan->desc_lock); + fsldma_cleanup_descriptors(chan); + spin_unlock_bh(&chan->desc_lock); + return dma_cookie_status(dchan, cookie, txstate); } @@ -996,52 +1123,18 @@ static irqreturn_t fsldma_chan_irq(int irq, void *data) static void dma_do_tasklet(unsigned long data) { struct fsldma_chan *chan = (struct fsldma_chan *)data; - struct fsl_desc_sw *desc, *_desc; - LIST_HEAD(ld_cleanup); - unsigned long flags; chan_dbg(chan, "tasklet entry\n"); - spin_lock_irqsave(&chan->desc_lock, flags); - - /* update the cookie if we have some descriptors to cleanup */ - if (!list_empty(&chan->ld_running)) { - dma_cookie_t cookie; - - desc = to_fsl_desc(chan->ld_running.prev); - cookie = desc->async_tx.cookie; - dma_cookie_complete(&desc->async_tx); - - chan_dbg(chan, "completed_cookie=%d\n", cookie); - } - - /* - * move the descriptors to a temporary list so we can drop the lock - * during the entire cleanup operation - */ - list_splice_tail_init(&chan->ld_running, &ld_cleanup); + spin_lock_bh(&chan->desc_lock); /* the hardware is now idle and ready for more */ chan->idle = true; - /* - * Start any pending transactions automatically - * - * In the ideal case, we keep the DMA controller busy while we go - * ahead and free the descriptors below. - */ - fsl_chan_xfer_ld_queue(chan); - spin_unlock_irqrestore(&chan->desc_lock, flags); - - /* Run the callback for each descriptor, in order */ - list_for_each_entry_safe(desc, _desc, &ld_cleanup, node) { - - /* Remove from the list of transactions */ - list_del(&desc->node); + /* Run all cleanup for descriptors which have been completed */ + fsldma_cleanup_descriptors(chan); - /* Run all cleanup for this descriptor */ - fsldma_cleanup_descriptor(chan, desc); - } + spin_unlock_bh(&chan->desc_lock); chan_dbg(chan, "tasklet exit\n"); } @@ -1225,7 +1318,11 @@ static int fsl_dma_chan_probe(struct fsldma_device *fdev, spin_lock_init(&chan->desc_lock); INIT_LIST_HEAD(&chan->ld_pending); INIT_LIST_HEAD(&chan->ld_running); + INIT_LIST_HEAD(&chan->ld_completed); chan->idle = true; +#ifdef CONFIG_PM + chan->pm_state = RUNNING; +#endif chan->common.device = &fdev->common; dma_cookie_init(&chan->common); @@ -1365,6 +1462,69 @@ static int fsldma_of_remove(struct platform_device *op) return 0; } +#ifdef CONFIG_PM +static int fsldma_suspend_late(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fsldma_device *fdev = platform_get_drvdata(pdev); + struct fsldma_chan *chan; + int i; + + for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) { + chan = fdev->chan[i]; + if (!chan) + continue; + + spin_lock_bh(&chan->desc_lock); + if (unlikely(!chan->idle)) + goto out; + chan->regs_save.mr = get_mr(chan); + chan->pm_state = SUSPENDED; + spin_unlock_bh(&chan->desc_lock); + } + return 0; + +out: + for (; i >= 0; i--) { + chan = fdev->chan[i]; + if (!chan) + continue; + chan->pm_state = RUNNING; + spin_unlock_bh(&chan->desc_lock); + } + return -EBUSY; +} + +static int fsldma_resume_early(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fsldma_device *fdev = platform_get_drvdata(pdev); + struct fsldma_chan *chan; + u32 mode; + int i; + + for (i = 0; i < FSL_DMA_MAX_CHANS_PER_DEVICE; i++) { + chan = fdev->chan[i]; + if (!chan) + continue; + + spin_lock_bh(&chan->desc_lock); + mode = chan->regs_save.mr + & ~FSL_DMA_MR_CS & ~FSL_DMA_MR_CC & ~FSL_DMA_MR_CA; + set_mr(chan, mode); + chan->pm_state = RUNNING; + spin_unlock_bh(&chan->desc_lock); + } + + return 0; +} + +static const struct dev_pm_ops fsldma_pm_ops = { + .suspend_late = fsldma_suspend_late, + .resume_early = fsldma_resume_early, +}; +#endif + static const struct of_device_id fsldma_of_ids[] = { { .compatible = "fsl,elo3-dma", }, { .compatible = "fsl,eloplus-dma", }, @@ -1377,6 +1537,9 @@ static struct platform_driver fsldma_of_driver = { .name = "fsl-elo-dma", .owner = THIS_MODULE, .of_match_table = fsldma_of_ids, +#ifdef CONFIG_PM + .pm = &fsldma_pm_ops, +#endif }, .probe = fsldma_of_probe, .remove = fsldma_of_remove, diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h index d56e83599825..239c20c84382 100644 --- a/drivers/dma/fsldma.h +++ b/drivers/dma/fsldma.h @@ -134,12 +134,36 @@ struct fsldma_device { #define FSL_DMA_CHAN_PAUSE_EXT 0x00001000 #define FSL_DMA_CHAN_START_EXT 0x00002000 +#ifdef CONFIG_PM +struct fsldma_chan_regs_save { + u32 mr; +}; + +enum fsldma_pm_state { + RUNNING = 0, + SUSPENDED, +}; +#endif + struct fsldma_chan { char name[8]; /* Channel name */ struct fsldma_chan_regs __iomem *regs; spinlock_t desc_lock; /* Descriptor operation lock */ - struct list_head ld_pending; /* Link descriptors queue */ - struct list_head ld_running; /* Link descriptors queue */ + /* + * Descriptors which are queued to run, but have not yet been + * submitted to the hardware for execution + */ + struct list_head ld_pending; + /* + * Descriptors which are currently being executed by the hardware + */ + struct list_head ld_running; + /* + * Descriptors which have finished execution by the hardware. These + * descriptors have already had their cleanup actions run. They are + * waiting for the ACK bit to be set by the async_tx API. + */ + struct list_head ld_completed; /* Link descriptors queue */ struct dma_chan common; /* DMA common channel */ struct dma_pool *desc_pool; /* Descriptors pool */ struct device *dev; /* Channel device */ @@ -148,6 +172,10 @@ struct fsldma_chan { struct tasklet_struct tasklet; u32 feature; bool idle; /* DMA controller is idle */ +#ifdef CONFIG_PM + struct fsldma_chan_regs_save regs_save; + enum fsldma_pm_state pm_state; +#endif void (*toggle_ext_pause)(struct fsldma_chan *fsl_chan, int enable); void (*toggle_ext_start)(struct fsldma_chan *fsl_chan, int enable); diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index 286660a12cc6..9d2c9e7374dc 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -866,7 +866,7 @@ static struct dma_async_tx_descriptor *imxdma_prep_slave_sg( static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct imxdma_channel *imxdmac = to_imxdma_chan(chan); struct imxdma_engine *imxdma = imxdmac->imxdma; diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 14867e3ac8ff..f7626e37d0b8 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -271,6 +271,7 @@ struct sdma_channel { unsigned int chn_count; unsigned int chn_real_count; struct tasklet_struct tasklet; + struct imx_dma_data data; }; #define IMX_DMA_SG_LOOP BIT(0) @@ -749,6 +750,11 @@ static void sdma_get_pc(struct sdma_channel *sdmac, emi_2_per = sdma->script_addrs->asrc_2_mcu_addr; per_2_per = sdma->script_addrs->per_2_per_addr; break; + case IMX_DMATYPE_ASRC_SP: + per_2_emi = sdma->script_addrs->shp_2_mcu_addr; + emi_2_per = sdma->script_addrs->mcu_2_shp_addr; + per_2_per = sdma->script_addrs->per_2_per_addr; + break; case IMX_DMATYPE_MSHC: per_2_emi = sdma->script_addrs->mshc_2_mcu_addr; emi_2_per = sdma->script_addrs->mcu_2_mshc_addr; @@ -911,14 +917,13 @@ static int sdma_request_channel(struct sdma_channel *sdmac) int channel = sdmac->channel; int ret = -EBUSY; - sdmac->bd = dma_alloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys, GFP_KERNEL); + sdmac->bd = dma_zalloc_coherent(NULL, PAGE_SIZE, &sdmac->bd_phys, + GFP_KERNEL); if (!sdmac->bd) { ret = -ENOMEM; goto out; } - memset(sdmac->bd, 0, PAGE_SIZE); - sdma->channel_control[channel].base_bd_ptr = sdmac->bd_phys; sdma->channel_control[channel].current_bd_ptr = sdmac->bd_phys; @@ -1120,7 +1125,7 @@ err_out: static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct sdma_channel *sdmac = to_sdma_chan(chan); struct sdma_engine *sdma = sdmac->sdma; @@ -1414,12 +1419,14 @@ err_dma_alloc: static bool sdma_filter_fn(struct dma_chan *chan, void *fn_param) { + struct sdma_channel *sdmac = to_sdma_chan(chan); struct imx_dma_data *data = fn_param; if (!imx_dma_is_general_purpose(chan)) return false; - chan->private = data; + sdmac->data = *data; + chan->private = &sdmac->data; return true; } diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 128ca143486d..bbf62927bd72 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1532,11 +1532,17 @@ static int idmac_alloc_chan_resources(struct dma_chan *chan) #ifdef DEBUG if (chan->chan_id == IDMAC_IC_7) { ic_sof = ipu_irq_map(69); - if (ic_sof > 0) - request_irq(ic_sof, ic_sof_irq, 0, "IC SOF", ichan); + if (ic_sof > 0) { + ret = request_irq(ic_sof, ic_sof_irq, 0, "IC SOF", ichan); + if (ret) + dev_err(&chan->dev->device, "request irq failed for IC SOF"); + } ic_eof = ipu_irq_map(70); - if (ic_eof > 0) - request_irq(ic_eof, ic_eof_irq, 0, "IC EOF", ichan); + if (ic_eof > 0) { + ret = request_irq(ic_eof, ic_eof_irq, 0, "IC EOF", ichan); + if (ret) + dev_err(&chan->dev->device, "request irq failed for IC EOF"); + } } #endif diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c index a7b186d536b3..a1a4db5721b8 100644 --- a/drivers/dma/mmp_pdma.c +++ b/drivers/dma/mmp_pdma.c @@ -601,7 +601,7 @@ static struct dma_async_tx_descriptor * mmp_pdma_prep_dma_cyclic(struct dma_chan *dchan, dma_addr_t buf_addr, size_t len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct mmp_pdma_chan *chan; struct mmp_pdma_desc_sw *first = NULL, *prev = NULL, *new; diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c index 724f7f4c9720..6ad30e2c5038 100644 --- a/drivers/dma/mmp_tdma.c +++ b/drivers/dma/mmp_tdma.c @@ -389,7 +389,7 @@ struct mmp_tdma_desc *mmp_tdma_alloc_descriptor(struct mmp_tdma_chan *tdmac) static struct dma_async_tx_descriptor *mmp_tdma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct mmp_tdma_chan *tdmac = to_mmp_tdma_chan(chan); struct mmp_tdma_desc *desc; diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 2ad43738ac8b..881db2bcb48b 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -53,6 +53,7 @@ #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/of_dma.h> #include <linux/of_platform.h> #include <linux/random.h> @@ -1036,7 +1037,15 @@ static int mpc_dma_probe(struct platform_device *op) if (retval) goto err_free2; - return retval; + /* Register with OF helpers for DMA lookups (nonfatal) */ + if (dev->of_node) { + retval = of_dma_controller_register(dev->of_node, + of_dma_xlate_by_chan_id, mdma); + if (retval) + dev_warn(dev, "Could not register for OF lookup\n"); + } + + return 0; err_free2: if (mdma->is_mpc8308) @@ -1057,6 +1066,8 @@ static int mpc_dma_remove(struct platform_device *op) struct device *dev = &op->dev; struct mpc_dma *mdma = dev_get_drvdata(dev); + if (dev->of_node) + of_dma_controller_free(dev->of_node); dma_async_device_unregister(&mdma->dma); if (mdma->is_mpc8308) { free_irq(mdma->irq2, mdma); diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index ead491346da7..5ea61201dbf0 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -413,16 +413,14 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan) struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; int ret; - mxs_chan->ccw = dma_alloc_coherent(mxs_dma->dma_device.dev, - CCW_BLOCK_SIZE, &mxs_chan->ccw_phys, - GFP_KERNEL); + mxs_chan->ccw = dma_zalloc_coherent(mxs_dma->dma_device.dev, + CCW_BLOCK_SIZE, + &mxs_chan->ccw_phys, GFP_KERNEL); if (!mxs_chan->ccw) { ret = -ENOMEM; goto err_alloc; } - memset(mxs_chan->ccw, 0, CCW_BLOCK_SIZE); - if (mxs_chan->chan_irq != NO_IRQ) { ret = request_irq(mxs_chan->chan_irq, mxs_dma_int_handler, 0, "mxs-dma", mxs_dma); @@ -591,7 +589,7 @@ err_out: static struct dma_async_tx_descriptor *mxs_dma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; diff --git a/drivers/dma/nbpfaxi.c b/drivers/dma/nbpfaxi.c new file mode 100644 index 000000000000..5aeada56a442 --- /dev/null +++ b/drivers/dma/nbpfaxi.c @@ -0,0 +1,1517 @@ +/* + * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd. + * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ + +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/log2.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_dma.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <dt-bindings/dma/nbpfaxi.h> + +#include "dmaengine.h" + +#define NBPF_REG_CHAN_OFFSET 0 +#define NBPF_REG_CHAN_SIZE 0x40 + +/* Channel Current Transaction Byte register */ +#define NBPF_CHAN_CUR_TR_BYTE 0x20 + +/* Channel Status register */ +#define NBPF_CHAN_STAT 0x24 +#define NBPF_CHAN_STAT_EN 1 +#define NBPF_CHAN_STAT_TACT 4 +#define NBPF_CHAN_STAT_ERR 0x10 +#define NBPF_CHAN_STAT_END 0x20 +#define NBPF_CHAN_STAT_TC 0x40 +#define NBPF_CHAN_STAT_DER 0x400 + +/* Channel Control register */ +#define NBPF_CHAN_CTRL 0x28 +#define NBPF_CHAN_CTRL_SETEN 1 +#define NBPF_CHAN_CTRL_CLREN 2 +#define NBPF_CHAN_CTRL_STG 4 +#define NBPF_CHAN_CTRL_SWRST 8 +#define NBPF_CHAN_CTRL_CLRRQ 0x10 +#define NBPF_CHAN_CTRL_CLREND 0x20 +#define NBPF_CHAN_CTRL_CLRTC 0x40 +#define NBPF_CHAN_CTRL_SETSUS 0x100 +#define NBPF_CHAN_CTRL_CLRSUS 0x200 + +/* Channel Configuration register */ +#define NBPF_CHAN_CFG 0x2c +#define NBPF_CHAN_CFG_SEL 7 /* terminal SELect: 0..7 */ +#define NBPF_CHAN_CFG_REQD 8 /* REQuest Direction: DMAREQ is 0: input, 1: output */ +#define NBPF_CHAN_CFG_LOEN 0x10 /* LOw ENable: low DMA request line is: 0: inactive, 1: active */ +#define NBPF_CHAN_CFG_HIEN 0x20 /* HIgh ENable: high DMA request line is: 0: inactive, 1: active */ +#define NBPF_CHAN_CFG_LVL 0x40 /* LeVeL: DMA request line is sensed as 0: edge, 1: level */ +#define NBPF_CHAN_CFG_AM 0x700 /* ACK Mode: 0: Pulse mode, 1: Level mode, b'1x: Bus Cycle */ +#define NBPF_CHAN_CFG_SDS 0xf000 /* Source Data Size: 0: 8 bits,... , 7: 1024 bits */ +#define NBPF_CHAN_CFG_DDS 0xf0000 /* Destination Data Size: as above */ +#define NBPF_CHAN_CFG_SAD 0x100000 /* Source ADdress counting: 0: increment, 1: fixed */ +#define NBPF_CHAN_CFG_DAD 0x200000 /* Destination ADdress counting: 0: increment, 1: fixed */ +#define NBPF_CHAN_CFG_TM 0x400000 /* Transfer Mode: 0: single, 1: block TM */ +#define NBPF_CHAN_CFG_DEM 0x1000000 /* DMAEND interrupt Mask */ +#define NBPF_CHAN_CFG_TCM 0x2000000 /* DMATCO interrupt Mask */ +#define NBPF_CHAN_CFG_SBE 0x8000000 /* Sweep Buffer Enable */ +#define NBPF_CHAN_CFG_RSEL 0x10000000 /* RM: Register Set sELect */ +#define NBPF_CHAN_CFG_RSW 0x20000000 /* RM: Register Select sWitch */ +#define NBPF_CHAN_CFG_REN 0x40000000 /* RM: Register Set Enable */ +#define NBPF_CHAN_CFG_DMS 0x80000000 /* 0: register mode (RM), 1: link mode (LM) */ + +#define NBPF_CHAN_NXLA 0x38 +#define NBPF_CHAN_CRLA 0x3c + +/* Link Header field */ +#define NBPF_HEADER_LV 1 +#define NBPF_HEADER_LE 2 +#define NBPF_HEADER_WBD 4 +#define NBPF_HEADER_DIM 8 + +#define NBPF_CTRL 0x300 +#define NBPF_CTRL_PR 1 /* 0: fixed priority, 1: round robin */ +#define NBPF_CTRL_LVINT 2 /* DMAEND and DMAERR signalling: 0: pulse, 1: level */ + +#define NBPF_DSTAT_ER 0x314 +#define NBPF_DSTAT_END 0x318 + +#define NBPF_DMA_BUSWIDTHS \ + (BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \ + BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \ + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \ + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \ + BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)) + +struct nbpf_config { + int num_channels; + int buffer_size; +}; + +/* + * We've got 3 types of objects, used to describe DMA transfers: + * 1. high-level descriptor, containing a struct dma_async_tx_descriptor object + * in it, used to communicate with the user + * 2. hardware DMA link descriptors, that we pass to DMAC for DMA transfer + * queuing, these must be DMAable, using either the streaming DMA API or + * allocated from coherent memory - one per SG segment + * 3. one per SG segment descriptors, used to manage HW link descriptors from + * (2). They do not have to be DMAable. They can either be (a) allocated + * together with link descriptors as mixed (DMA / CPU) objects, or (b) + * separately. Even if allocated separately it would be best to link them + * to link descriptors once during channel resource allocation and always + * use them as a single object. + * Therefore for both cases (a) and (b) at run-time objects (2) and (3) shall be + * treated as a single SG segment descriptor. + */ + +struct nbpf_link_reg { + u32 header; + u32 src_addr; + u32 dst_addr; + u32 transaction_size; + u32 config; + u32 interval; + u32 extension; + u32 next; +} __packed; + +struct nbpf_device; +struct nbpf_channel; +struct nbpf_desc; + +struct nbpf_link_desc { + struct nbpf_link_reg *hwdesc; + dma_addr_t hwdesc_dma_addr; + struct nbpf_desc *desc; + struct list_head node; +}; + +/** + * struct nbpf_desc - DMA transfer descriptor + * @async_tx: dmaengine object + * @user_wait: waiting for a user ack + * @length: total transfer length + * @sg: list of hardware descriptors, represented by struct nbpf_link_desc + * @node: member in channel descriptor lists + */ +struct nbpf_desc { + struct dma_async_tx_descriptor async_tx; + bool user_wait; + size_t length; + struct nbpf_channel *chan; + struct list_head sg; + struct list_head node; +}; + +/* Take a wild guess: allocate 4 segments per descriptor */ +#define NBPF_SEGMENTS_PER_DESC 4 +#define NBPF_DESCS_PER_PAGE ((PAGE_SIZE - sizeof(struct list_head)) / \ + (sizeof(struct nbpf_desc) + \ + NBPF_SEGMENTS_PER_DESC * \ + (sizeof(struct nbpf_link_desc) + sizeof(struct nbpf_link_reg)))) +#define NBPF_SEGMENTS_PER_PAGE (NBPF_SEGMENTS_PER_DESC * NBPF_DESCS_PER_PAGE) + +struct nbpf_desc_page { + struct list_head node; + struct nbpf_desc desc[NBPF_DESCS_PER_PAGE]; + struct nbpf_link_desc ldesc[NBPF_SEGMENTS_PER_PAGE]; + struct nbpf_link_reg hwdesc[NBPF_SEGMENTS_PER_PAGE]; +}; + +/** + * struct nbpf_channel - one DMAC channel + * @dma_chan: standard dmaengine channel object + * @base: register address base + * @nbpf: DMAC + * @name: IRQ name + * @irq: IRQ number + * @slave_addr: address for slave DMA + * @slave_width:slave data size in bytes + * @slave_burst:maximum slave burst size in bytes + * @terminal: DMA terminal, assigned to this channel + * @dmarq_cfg: DMA request line configuration - high / low, edge / level for NBPF_CHAN_CFG + * @flags: configuration flags from DT + * @lock: protect descriptor lists + * @free_links: list of free link descriptors + * @free: list of free descriptors + * @queued: list of queued descriptors + * @active: list of descriptors, scheduled for processing + * @done: list of completed descriptors, waiting post-processing + * @desc_page: list of additionally allocated descriptor pages - if any + */ +struct nbpf_channel { + struct dma_chan dma_chan; + struct tasklet_struct tasklet; + void __iomem *base; + struct nbpf_device *nbpf; + char name[16]; + int irq; + dma_addr_t slave_src_addr; + size_t slave_src_width; + size_t slave_src_burst; + dma_addr_t slave_dst_addr; + size_t slave_dst_width; + size_t slave_dst_burst; + unsigned int terminal; + u32 dmarq_cfg; + unsigned long flags; + spinlock_t lock; + struct list_head free_links; + struct list_head free; + struct list_head queued; + struct list_head active; + struct list_head done; + struct list_head desc_page; + struct nbpf_desc *running; + bool paused; +}; + +struct nbpf_device { + struct dma_device dma_dev; + void __iomem *base; + struct clk *clk; + const struct nbpf_config *config; + struct nbpf_channel chan[]; +}; + +enum nbpf_model { + NBPF1B4, + NBPF1B8, + NBPF1B16, + NBPF4B4, + NBPF4B8, + NBPF4B16, + NBPF8B4, + NBPF8B8, + NBPF8B16, +}; + +static struct nbpf_config nbpf_cfg[] = { + [NBPF1B4] = { + .num_channels = 1, + .buffer_size = 4, + }, + [NBPF1B8] = { + .num_channels = 1, + .buffer_size = 8, + }, + [NBPF1B16] = { + .num_channels = 1, + .buffer_size = 16, + }, + [NBPF4B4] = { + .num_channels = 4, + .buffer_size = 4, + }, + [NBPF4B8] = { + .num_channels = 4, + .buffer_size = 8, + }, + [NBPF4B16] = { + .num_channels = 4, + .buffer_size = 16, + }, + [NBPF8B4] = { + .num_channels = 8, + .buffer_size = 4, + }, + [NBPF8B8] = { + .num_channels = 8, + .buffer_size = 8, + }, + [NBPF8B16] = { + .num_channels = 8, + .buffer_size = 16, + }, +}; + +#define nbpf_to_chan(d) container_of(d, struct nbpf_channel, dma_chan) + +/* + * dmaengine drivers seem to have a lot in common and instead of sharing more + * code, they reimplement those common algorithms independently. In this driver + * we try to separate the hardware-specific part from the (largely) generic + * part. This improves code readability and makes it possible in the future to + * reuse the generic code in form of a helper library. That generic code should + * be suitable for various DMA controllers, using transfer descriptors in RAM + * and pushing one SG list at a time to the DMA controller. + */ + +/* Hardware-specific part */ + +static inline u32 nbpf_chan_read(struct nbpf_channel *chan, + unsigned int offset) +{ + u32 data = ioread32(chan->base + offset); + dev_dbg(chan->dma_chan.device->dev, "%s(0x%p + 0x%x) = 0x%x\n", + __func__, chan->base, offset, data); + return data; +} + +static inline void nbpf_chan_write(struct nbpf_channel *chan, + unsigned int offset, u32 data) +{ + iowrite32(data, chan->base + offset); + dev_dbg(chan->dma_chan.device->dev, "%s(0x%p + 0x%x) = 0x%x\n", + __func__, chan->base, offset, data); +} + +static inline u32 nbpf_read(struct nbpf_device *nbpf, + unsigned int offset) +{ + u32 data = ioread32(nbpf->base + offset); + dev_dbg(nbpf->dma_dev.dev, "%s(0x%p + 0x%x) = 0x%x\n", + __func__, nbpf->base, offset, data); + return data; +} + +static inline void nbpf_write(struct nbpf_device *nbpf, + unsigned int offset, u32 data) +{ + iowrite32(data, nbpf->base + offset); + dev_dbg(nbpf->dma_dev.dev, "%s(0x%p + 0x%x) = 0x%x\n", + __func__, nbpf->base, offset, data); +} + +static void nbpf_chan_halt(struct nbpf_channel *chan) +{ + nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREN); +} + +static bool nbpf_status_get(struct nbpf_channel *chan) +{ + u32 status = nbpf_read(chan->nbpf, NBPF_DSTAT_END); + + return status & BIT(chan - chan->nbpf->chan); +} + +static void nbpf_status_ack(struct nbpf_channel *chan) +{ + nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREND); +} + +static u32 nbpf_error_get(struct nbpf_device *nbpf) +{ + return nbpf_read(nbpf, NBPF_DSTAT_ER); +} + +static struct nbpf_channel *nbpf_error_get_channel(struct nbpf_device *nbpf, u32 error) +{ + return nbpf->chan + __ffs(error); +} + +static void nbpf_error_clear(struct nbpf_channel *chan) +{ + u32 status; + int i; + + /* Stop the channel, make sure DMA has been aborted */ + nbpf_chan_halt(chan); + + for (i = 1000; i; i--) { + status = nbpf_chan_read(chan, NBPF_CHAN_STAT); + if (!(status & NBPF_CHAN_STAT_TACT)) + break; + cpu_relax(); + } + + if (!i) + dev_err(chan->dma_chan.device->dev, + "%s(): abort timeout, channel status 0x%x\n", __func__, status); + + nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SWRST); +} + +static int nbpf_start(struct nbpf_desc *desc) +{ + struct nbpf_channel *chan = desc->chan; + struct nbpf_link_desc *ldesc = list_first_entry(&desc->sg, struct nbpf_link_desc, node); + + nbpf_chan_write(chan, NBPF_CHAN_NXLA, (u32)ldesc->hwdesc_dma_addr); + nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SETEN | NBPF_CHAN_CTRL_CLRSUS); + chan->paused = false; + + /* Software trigger MEMCPY - only MEMCPY uses the block mode */ + if (ldesc->hwdesc->config & NBPF_CHAN_CFG_TM) + nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_STG); + + dev_dbg(chan->nbpf->dma_dev.dev, "%s(): next 0x%x, cur 0x%x\n", __func__, + nbpf_chan_read(chan, NBPF_CHAN_NXLA), nbpf_chan_read(chan, NBPF_CHAN_CRLA)); + + return 0; +} + +static void nbpf_chan_prepare(struct nbpf_channel *chan) +{ + chan->dmarq_cfg = (chan->flags & NBPF_SLAVE_RQ_HIGH ? NBPF_CHAN_CFG_HIEN : 0) | + (chan->flags & NBPF_SLAVE_RQ_LOW ? NBPF_CHAN_CFG_LOEN : 0) | + (chan->flags & NBPF_SLAVE_RQ_LEVEL ? + NBPF_CHAN_CFG_LVL | (NBPF_CHAN_CFG_AM & 0x200) : 0) | + chan->terminal; +} + +static void nbpf_chan_prepare_default(struct nbpf_channel *chan) +{ + /* Don't output DMAACK */ + chan->dmarq_cfg = NBPF_CHAN_CFG_AM & 0x400; + chan->terminal = 0; + chan->flags = 0; +} + +static void nbpf_chan_configure(struct nbpf_channel *chan) +{ + /* + * We assume, that only the link mode and DMA request line configuration + * have to be set in the configuration register manually. Dynamic + * per-transfer configuration will be loaded from transfer descriptors. + */ + nbpf_chan_write(chan, NBPF_CHAN_CFG, NBPF_CHAN_CFG_DMS | chan->dmarq_cfg); +} + +static u32 nbpf_xfer_ds(struct nbpf_device *nbpf, size_t size) +{ + /* Maximum supported bursts depend on the buffer size */ + return min_t(int, __ffs(size), ilog2(nbpf->config->buffer_size * 8)); +} + +static size_t nbpf_xfer_size(struct nbpf_device *nbpf, + enum dma_slave_buswidth width, u32 burst) +{ + size_t size; + + if (!burst) + burst = 1; + + switch (width) { + case DMA_SLAVE_BUSWIDTH_8_BYTES: + size = 8 * burst; + break; + + case DMA_SLAVE_BUSWIDTH_4_BYTES: + size = 4 * burst; + break; + + case DMA_SLAVE_BUSWIDTH_2_BYTES: + size = 2 * burst; + break; + + default: + pr_warn("%s(): invalid bus width %u\n", __func__, width); + case DMA_SLAVE_BUSWIDTH_1_BYTE: + size = burst; + } + + return nbpf_xfer_ds(nbpf, size); +} + +/* + * We need a way to recognise slaves, whose data is sent "raw" over the bus, + * i.e. it isn't known in advance how many bytes will be received. Therefore + * the slave driver has to provide a "large enough" buffer and either read the + * buffer, when it is full, or detect, that some data has arrived, then wait for + * a timeout, if no more data arrives - receive what's already there. We want to + * handle such slaves in a special way to allow an optimised mode for other + * users, for whom the amount of data is known in advance. So far there's no way + * to recognise such slaves. We use a data-width check to distinguish between + * the SD host and the PL011 UART. + */ + +static int nbpf_prep_one(struct nbpf_link_desc *ldesc, + enum dma_transfer_direction direction, + dma_addr_t src, dma_addr_t dst, size_t size, bool last) +{ + struct nbpf_link_reg *hwdesc = ldesc->hwdesc; + struct nbpf_desc *desc = ldesc->desc; + struct nbpf_channel *chan = desc->chan; + struct device *dev = chan->dma_chan.device->dev; + size_t mem_xfer, slave_xfer; + bool can_burst; + + hwdesc->header = NBPF_HEADER_WBD | NBPF_HEADER_LV | + (last ? NBPF_HEADER_LE : 0); + + hwdesc->src_addr = src; + hwdesc->dst_addr = dst; + hwdesc->transaction_size = size; + + /* + * set config: SAD, DAD, DDS, SDS, etc. + * Note on transfer sizes: the DMAC can perform unaligned DMA transfers, + * but it is important to have transaction size a multiple of both + * receiver and transmitter transfer sizes. It is also possible to use + * different RAM and device transfer sizes, and it does work well with + * some devices, e.g. with V08R07S01E SD host controllers, which can use + * 128 byte transfers. But this doesn't work with other devices, + * especially when the transaction size is unknown. This is the case, + * e.g. with serial drivers like amba-pl011.c. For reception it sets up + * the transaction size of 4K and if fewer bytes are received, it + * pauses DMA and reads out data received via DMA as well as those left + * in the Rx FIFO. For this to work with the RAM side using burst + * transfers we enable the SBE bit and terminate the transfer in our + * DMA_PAUSE handler. + */ + mem_xfer = nbpf_xfer_ds(chan->nbpf, size); + + switch (direction) { + case DMA_DEV_TO_MEM: + can_burst = chan->slave_src_width >= 3; + slave_xfer = min(mem_xfer, can_burst ? + chan->slave_src_burst : chan->slave_src_width); + /* + * Is the slave narrower than 64 bits, i.e. isn't using the full + * bus width and cannot use bursts? + */ + if (mem_xfer > chan->slave_src_burst && !can_burst) + mem_xfer = chan->slave_src_burst; + /* Device-to-RAM DMA is unreliable without REQD set */ + hwdesc->config = NBPF_CHAN_CFG_SAD | (NBPF_CHAN_CFG_DDS & (mem_xfer << 16)) | + (NBPF_CHAN_CFG_SDS & (slave_xfer << 12)) | NBPF_CHAN_CFG_REQD | + NBPF_CHAN_CFG_SBE; + break; + + case DMA_MEM_TO_DEV: + slave_xfer = min(mem_xfer, chan->slave_dst_width >= 3 ? + chan->slave_dst_burst : chan->slave_dst_width); + hwdesc->config = NBPF_CHAN_CFG_DAD | (NBPF_CHAN_CFG_SDS & (mem_xfer << 12)) | + (NBPF_CHAN_CFG_DDS & (slave_xfer << 16)) | NBPF_CHAN_CFG_REQD; + break; + + case DMA_MEM_TO_MEM: + hwdesc->config = NBPF_CHAN_CFG_TCM | NBPF_CHAN_CFG_TM | + (NBPF_CHAN_CFG_SDS & (mem_xfer << 12)) | + (NBPF_CHAN_CFG_DDS & (mem_xfer << 16)); + break; + + default: + return -EINVAL; + } + + hwdesc->config |= chan->dmarq_cfg | (last ? 0 : NBPF_CHAN_CFG_DEM) | + NBPF_CHAN_CFG_DMS; + + dev_dbg(dev, "%s(): desc @ %pad: hdr 0x%x, cfg 0x%x, %zu @ %pad -> %pad\n", + __func__, &ldesc->hwdesc_dma_addr, hwdesc->header, + hwdesc->config, size, &src, &dst); + + dma_sync_single_for_device(dev, ldesc->hwdesc_dma_addr, sizeof(*hwdesc), + DMA_TO_DEVICE); + + return 0; +} + +static size_t nbpf_bytes_left(struct nbpf_channel *chan) +{ + return nbpf_chan_read(chan, NBPF_CHAN_CUR_TR_BYTE); +} + +static void nbpf_configure(struct nbpf_device *nbpf) +{ + nbpf_write(nbpf, NBPF_CTRL, NBPF_CTRL_LVINT); +} + +static void nbpf_pause(struct nbpf_channel *chan) +{ + nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_SETSUS); + /* See comment in nbpf_prep_one() */ + nbpf_chan_write(chan, NBPF_CHAN_CTRL, NBPF_CHAN_CTRL_CLREN); +} + +/* Generic part */ + +/* DMA ENGINE functions */ +static void nbpf_issue_pending(struct dma_chan *dchan) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); + unsigned long flags; + + dev_dbg(dchan->device->dev, "Entry %s()\n", __func__); + + spin_lock_irqsave(&chan->lock, flags); + if (list_empty(&chan->queued)) + goto unlock; + + list_splice_tail_init(&chan->queued, &chan->active); + + if (!chan->running) { + struct nbpf_desc *desc = list_first_entry(&chan->active, + struct nbpf_desc, node); + if (!nbpf_start(desc)) + chan->running = desc; + } + +unlock: + spin_unlock_irqrestore(&chan->lock, flags); +} + +static enum dma_status nbpf_tx_status(struct dma_chan *dchan, + dma_cookie_t cookie, struct dma_tx_state *state) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); + enum dma_status status = dma_cookie_status(dchan, cookie, state); + + if (state) { + dma_cookie_t running; + unsigned long flags; + + spin_lock_irqsave(&chan->lock, flags); + running = chan->running ? chan->running->async_tx.cookie : -EINVAL; + + if (cookie == running) { + state->residue = nbpf_bytes_left(chan); + dev_dbg(dchan->device->dev, "%s(): residue %u\n", __func__, + state->residue); + } else if (status == DMA_IN_PROGRESS) { + struct nbpf_desc *desc; + bool found = false; + + list_for_each_entry(desc, &chan->active, node) + if (desc->async_tx.cookie == cookie) { + found = true; + break; + } + + if (!found) + list_for_each_entry(desc, &chan->queued, node) + if (desc->async_tx.cookie == cookie) { + found = true; + break; + + } + + state->residue = found ? desc->length : 0; + } + + spin_unlock_irqrestore(&chan->lock, flags); + } + + if (chan->paused) + status = DMA_PAUSED; + + return status; +} + +static dma_cookie_t nbpf_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct nbpf_desc *desc = container_of(tx, struct nbpf_desc, async_tx); + struct nbpf_channel *chan = desc->chan; + unsigned long flags; + dma_cookie_t cookie; + + spin_lock_irqsave(&chan->lock, flags); + cookie = dma_cookie_assign(tx); + list_add_tail(&desc->node, &chan->queued); + spin_unlock_irqrestore(&chan->lock, flags); + + dev_dbg(chan->dma_chan.device->dev, "Entry %s(%d)\n", __func__, cookie); + + return cookie; +} + +static int nbpf_desc_page_alloc(struct nbpf_channel *chan) +{ + struct dma_chan *dchan = &chan->dma_chan; + struct nbpf_desc_page *dpage = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); + struct nbpf_link_desc *ldesc; + struct nbpf_link_reg *hwdesc; + struct nbpf_desc *desc; + LIST_HEAD(head); + LIST_HEAD(lhead); + int i; + struct device *dev = dchan->device->dev; + + if (!dpage) + return -ENOMEM; + + dev_dbg(dev, "%s(): alloc %lu descriptors, %lu segments, total alloc %zu\n", + __func__, NBPF_DESCS_PER_PAGE, NBPF_SEGMENTS_PER_PAGE, sizeof(*dpage)); + + for (i = 0, ldesc = dpage->ldesc, hwdesc = dpage->hwdesc; + i < ARRAY_SIZE(dpage->ldesc); + i++, ldesc++, hwdesc++) { + ldesc->hwdesc = hwdesc; + list_add_tail(&ldesc->node, &lhead); + ldesc->hwdesc_dma_addr = dma_map_single(dchan->device->dev, + hwdesc, sizeof(*hwdesc), DMA_TO_DEVICE); + + dev_dbg(dev, "%s(): mapped 0x%p to %pad\n", __func__, + hwdesc, &ldesc->hwdesc_dma_addr); + } + + for (i = 0, desc = dpage->desc; + i < ARRAY_SIZE(dpage->desc); + i++, desc++) { + dma_async_tx_descriptor_init(&desc->async_tx, dchan); + desc->async_tx.tx_submit = nbpf_tx_submit; + desc->chan = chan; + INIT_LIST_HEAD(&desc->sg); + list_add_tail(&desc->node, &head); + } + + /* + * This function cannot be called from interrupt context, so, no need to + * save flags + */ + spin_lock_irq(&chan->lock); + list_splice_tail(&lhead, &chan->free_links); + list_splice_tail(&head, &chan->free); + list_add(&dpage->node, &chan->desc_page); + spin_unlock_irq(&chan->lock); + + return ARRAY_SIZE(dpage->desc); +} + +static void nbpf_desc_put(struct nbpf_desc *desc) +{ + struct nbpf_channel *chan = desc->chan; + struct nbpf_link_desc *ldesc, *tmp; + unsigned long flags; + + spin_lock_irqsave(&chan->lock, flags); + list_for_each_entry_safe(ldesc, tmp, &desc->sg, node) + list_move(&ldesc->node, &chan->free_links); + + list_add(&desc->node, &chan->free); + spin_unlock_irqrestore(&chan->lock, flags); +} + +static void nbpf_scan_acked(struct nbpf_channel *chan) +{ + struct nbpf_desc *desc, *tmp; + unsigned long flags; + LIST_HEAD(head); + + spin_lock_irqsave(&chan->lock, flags); + list_for_each_entry_safe(desc, tmp, &chan->done, node) + if (async_tx_test_ack(&desc->async_tx) && desc->user_wait) { + list_move(&desc->node, &head); + desc->user_wait = false; + } + spin_unlock_irqrestore(&chan->lock, flags); + + list_for_each_entry_safe(desc, tmp, &head, node) { + list_del(&desc->node); + nbpf_desc_put(desc); + } +} + +/* + * We have to allocate descriptors with the channel lock dropped. This means, + * before we re-acquire the lock buffers can be taken already, so we have to + * re-check after re-acquiring the lock and possibly retry, if buffers are gone + * again. + */ +static struct nbpf_desc *nbpf_desc_get(struct nbpf_channel *chan, size_t len) +{ + struct nbpf_desc *desc = NULL; + struct nbpf_link_desc *ldesc, *prev = NULL; + + nbpf_scan_acked(chan); + + spin_lock_irq(&chan->lock); + + do { + int i = 0, ret; + + if (list_empty(&chan->free)) { + /* No more free descriptors */ + spin_unlock_irq(&chan->lock); + ret = nbpf_desc_page_alloc(chan); + if (ret < 0) + return NULL; + spin_lock_irq(&chan->lock); + continue; + } + desc = list_first_entry(&chan->free, struct nbpf_desc, node); + list_del(&desc->node); + + do { + if (list_empty(&chan->free_links)) { + /* No more free link descriptors */ + spin_unlock_irq(&chan->lock); + ret = nbpf_desc_page_alloc(chan); + if (ret < 0) { + nbpf_desc_put(desc); + return NULL; + } + spin_lock_irq(&chan->lock); + continue; + } + + ldesc = list_first_entry(&chan->free_links, + struct nbpf_link_desc, node); + ldesc->desc = desc; + if (prev) + prev->hwdesc->next = (u32)ldesc->hwdesc_dma_addr; + + prev = ldesc; + list_move_tail(&ldesc->node, &desc->sg); + + i++; + } while (i < len); + } while (!desc); + + prev->hwdesc->next = 0; + + spin_unlock_irq(&chan->lock); + + return desc; +} + +static void nbpf_chan_idle(struct nbpf_channel *chan) +{ + struct nbpf_desc *desc, *tmp; + unsigned long flags; + LIST_HEAD(head); + + spin_lock_irqsave(&chan->lock, flags); + + list_splice_init(&chan->done, &head); + list_splice_init(&chan->active, &head); + list_splice_init(&chan->queued, &head); + + chan->running = NULL; + + spin_unlock_irqrestore(&chan->lock, flags); + + list_for_each_entry_safe(desc, tmp, &head, node) { + dev_dbg(chan->nbpf->dma_dev.dev, "%s(): force-free desc %p cookie %d\n", + __func__, desc, desc->async_tx.cookie); + list_del(&desc->node); + nbpf_desc_put(desc); + } +} + +static int nbpf_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); + struct dma_slave_config *config; + + dev_dbg(dchan->device->dev, "Entry %s(%d)\n", __func__, cmd); + + switch (cmd) { + case DMA_TERMINATE_ALL: + dev_dbg(dchan->device->dev, "Terminating\n"); + nbpf_chan_halt(chan); + nbpf_chan_idle(chan); + break; + + case DMA_SLAVE_CONFIG: + if (!arg) + return -EINVAL; + config = (struct dma_slave_config *)arg; + + /* + * We could check config->slave_id to match chan->terminal here, + * but with DT they would be coming from the same source, so + * such a check would be superflous + */ + + chan->slave_dst_addr = config->dst_addr; + chan->slave_dst_width = nbpf_xfer_size(chan->nbpf, + config->dst_addr_width, 1); + chan->slave_dst_burst = nbpf_xfer_size(chan->nbpf, + config->dst_addr_width, + config->dst_maxburst); + chan->slave_src_addr = config->src_addr; + chan->slave_src_width = nbpf_xfer_size(chan->nbpf, + config->src_addr_width, 1); + chan->slave_src_burst = nbpf_xfer_size(chan->nbpf, + config->src_addr_width, + config->src_maxburst); + break; + + case DMA_PAUSE: + chan->paused = true; + nbpf_pause(chan); + break; + + default: + return -ENXIO; + } + + return 0; +} + +static struct dma_async_tx_descriptor *nbpf_prep_sg(struct nbpf_channel *chan, + struct scatterlist *src_sg, struct scatterlist *dst_sg, + size_t len, enum dma_transfer_direction direction, + unsigned long flags) +{ + struct nbpf_link_desc *ldesc; + struct scatterlist *mem_sg; + struct nbpf_desc *desc; + bool inc_src, inc_dst; + size_t data_len = 0; + int i = 0; + + switch (direction) { + case DMA_DEV_TO_MEM: + mem_sg = dst_sg; + inc_src = false; + inc_dst = true; + break; + + case DMA_MEM_TO_DEV: + mem_sg = src_sg; + inc_src = true; + inc_dst = false; + break; + + default: + case DMA_MEM_TO_MEM: + mem_sg = src_sg; + inc_src = true; + inc_dst = true; + } + + desc = nbpf_desc_get(chan, len); + if (!desc) + return NULL; + + desc->async_tx.flags = flags; + desc->async_tx.cookie = -EBUSY; + desc->user_wait = false; + + /* + * This is a private descriptor list, and we own the descriptor. No need + * to lock. + */ + list_for_each_entry(ldesc, &desc->sg, node) { + int ret = nbpf_prep_one(ldesc, direction, + sg_dma_address(src_sg), + sg_dma_address(dst_sg), + sg_dma_len(mem_sg), + i == len - 1); + if (ret < 0) { + nbpf_desc_put(desc); + return NULL; + } + data_len += sg_dma_len(mem_sg); + if (inc_src) + src_sg = sg_next(src_sg); + if (inc_dst) + dst_sg = sg_next(dst_sg); + mem_sg = direction == DMA_DEV_TO_MEM ? dst_sg : src_sg; + i++; + } + + desc->length = data_len; + + /* The user has to return the descriptor to us ASAP via .tx_submit() */ + return &desc->async_tx; +} + +static struct dma_async_tx_descriptor *nbpf_prep_memcpy( + struct dma_chan *dchan, dma_addr_t dst, dma_addr_t src, + size_t len, unsigned long flags) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); + struct scatterlist dst_sg; + struct scatterlist src_sg; + + sg_init_table(&dst_sg, 1); + sg_init_table(&src_sg, 1); + + sg_dma_address(&dst_sg) = dst; + sg_dma_address(&src_sg) = src; + + sg_dma_len(&dst_sg) = len; + sg_dma_len(&src_sg) = len; + + dev_dbg(dchan->device->dev, "%s(): %zu @ %pad -> %pad\n", + __func__, len, &src, &dst); + + return nbpf_prep_sg(chan, &src_sg, &dst_sg, 1, + DMA_MEM_TO_MEM, flags); +} + +static struct dma_async_tx_descriptor *nbpf_prep_memcpy_sg( + struct dma_chan *dchan, + struct scatterlist *dst_sg, unsigned int dst_nents, + struct scatterlist *src_sg, unsigned int src_nents, + unsigned long flags) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); + + if (dst_nents != src_nents) + return NULL; + + return nbpf_prep_sg(chan, src_sg, dst_sg, src_nents, + DMA_MEM_TO_MEM, flags); +} + +static struct dma_async_tx_descriptor *nbpf_prep_slave_sg( + struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len, + enum dma_transfer_direction direction, unsigned long flags, void *context) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); + struct scatterlist slave_sg; + + dev_dbg(dchan->device->dev, "Entry %s()\n", __func__); + + sg_init_table(&slave_sg, 1); + + switch (direction) { + case DMA_MEM_TO_DEV: + sg_dma_address(&slave_sg) = chan->slave_dst_addr; + return nbpf_prep_sg(chan, sgl, &slave_sg, sg_len, + direction, flags); + + case DMA_DEV_TO_MEM: + sg_dma_address(&slave_sg) = chan->slave_src_addr; + return nbpf_prep_sg(chan, &slave_sg, sgl, sg_len, + direction, flags); + + default: + return NULL; + } +} + +static int nbpf_alloc_chan_resources(struct dma_chan *dchan) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); + int ret; + + INIT_LIST_HEAD(&chan->free); + INIT_LIST_HEAD(&chan->free_links); + INIT_LIST_HEAD(&chan->queued); + INIT_LIST_HEAD(&chan->active); + INIT_LIST_HEAD(&chan->done); + + ret = nbpf_desc_page_alloc(chan); + if (ret < 0) + return ret; + + dev_dbg(dchan->device->dev, "Entry %s(): terminal %u\n", __func__, + chan->terminal); + + nbpf_chan_configure(chan); + + return ret; +} + +static void nbpf_free_chan_resources(struct dma_chan *dchan) +{ + struct nbpf_channel *chan = nbpf_to_chan(dchan); + struct nbpf_desc_page *dpage, *tmp; + + dev_dbg(dchan->device->dev, "Entry %s()\n", __func__); + + nbpf_chan_halt(chan); + nbpf_chan_idle(chan); + /* Clean up for if a channel is re-used for MEMCPY after slave DMA */ + nbpf_chan_prepare_default(chan); + + list_for_each_entry_safe(dpage, tmp, &chan->desc_page, node) { + struct nbpf_link_desc *ldesc; + int i; + list_del(&dpage->node); + for (i = 0, ldesc = dpage->ldesc; + i < ARRAY_SIZE(dpage->ldesc); + i++, ldesc++) + dma_unmap_single(dchan->device->dev, ldesc->hwdesc_dma_addr, + sizeof(*ldesc->hwdesc), DMA_TO_DEVICE); + free_page((unsigned long)dpage); + } +} + +static int nbpf_slave_caps(struct dma_chan *dchan, + struct dma_slave_caps *caps) +{ + caps->src_addr_widths = NBPF_DMA_BUSWIDTHS; + caps->dstn_addr_widths = NBPF_DMA_BUSWIDTHS; + caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + caps->cmd_pause = false; + caps->cmd_terminate = true; + + return 0; +} + +static struct dma_chan *nbpf_of_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct nbpf_device *nbpf = ofdma->of_dma_data; + struct dma_chan *dchan; + struct nbpf_channel *chan; + + if (dma_spec->args_count != 2) + return NULL; + + dchan = dma_get_any_slave_channel(&nbpf->dma_dev); + if (!dchan) + return NULL; + + dev_dbg(dchan->device->dev, "Entry %s(%s)\n", __func__, + dma_spec->np->name); + + chan = nbpf_to_chan(dchan); + + chan->terminal = dma_spec->args[0]; + chan->flags = dma_spec->args[1]; + + nbpf_chan_prepare(chan); + nbpf_chan_configure(chan); + + return dchan; +} + +static void nbpf_chan_tasklet(unsigned long data) +{ + struct nbpf_channel *chan = (struct nbpf_channel *)data; + struct nbpf_desc *desc, *tmp; + dma_async_tx_callback callback; + void *param; + + while (!list_empty(&chan->done)) { + bool found = false, must_put, recycling = false; + + spin_lock_irq(&chan->lock); + + list_for_each_entry_safe(desc, tmp, &chan->done, node) { + if (!desc->user_wait) { + /* Newly completed descriptor, have to process */ + found = true; + break; + } else if (async_tx_test_ack(&desc->async_tx)) { + /* + * This descriptor was waiting for a user ACK, + * it can be recycled now. + */ + list_del(&desc->node); + spin_unlock_irq(&chan->lock); + nbpf_desc_put(desc); + recycling = true; + break; + } + } + + if (recycling) + continue; + + if (!found) { + /* This can happen if TERMINATE_ALL has been called */ + spin_unlock_irq(&chan->lock); + break; + } + + dma_cookie_complete(&desc->async_tx); + + /* + * With released lock we cannot dereference desc, maybe it's + * still on the "done" list + */ + if (async_tx_test_ack(&desc->async_tx)) { + list_del(&desc->node); + must_put = true; + } else { + desc->user_wait = true; + must_put = false; + } + + callback = desc->async_tx.callback; + param = desc->async_tx.callback_param; + + /* ack and callback completed descriptor */ + spin_unlock_irq(&chan->lock); + + if (callback) + callback(param); + + if (must_put) + nbpf_desc_put(desc); + } +} + +static irqreturn_t nbpf_chan_irq(int irq, void *dev) +{ + struct nbpf_channel *chan = dev; + bool done = nbpf_status_get(chan); + struct nbpf_desc *desc; + irqreturn_t ret; + bool bh = false; + + if (!done) + return IRQ_NONE; + + nbpf_status_ack(chan); + + dev_dbg(&chan->dma_chan.dev->device, "%s()\n", __func__); + + spin_lock(&chan->lock); + desc = chan->running; + if (WARN_ON(!desc)) { + ret = IRQ_NONE; + goto unlock; + } else { + ret = IRQ_HANDLED; + bh = true; + } + + list_move_tail(&desc->node, &chan->done); + chan->running = NULL; + + if (!list_empty(&chan->active)) { + desc = list_first_entry(&chan->active, + struct nbpf_desc, node); + if (!nbpf_start(desc)) + chan->running = desc; + } + +unlock: + spin_unlock(&chan->lock); + + if (bh) + tasklet_schedule(&chan->tasklet); + + return ret; +} + +static irqreturn_t nbpf_err_irq(int irq, void *dev) +{ + struct nbpf_device *nbpf = dev; + u32 error = nbpf_error_get(nbpf); + + dev_warn(nbpf->dma_dev.dev, "DMA error IRQ %u\n", irq); + + if (!error) + return IRQ_NONE; + + do { + struct nbpf_channel *chan = nbpf_error_get_channel(nbpf, error); + /* On error: abort all queued transfers, no callback */ + nbpf_error_clear(chan); + nbpf_chan_idle(chan); + error = nbpf_error_get(nbpf); + } while (error); + + return IRQ_HANDLED; +} + +static int nbpf_chan_probe(struct nbpf_device *nbpf, int n) +{ + struct dma_device *dma_dev = &nbpf->dma_dev; + struct nbpf_channel *chan = nbpf->chan + n; + int ret; + + chan->nbpf = nbpf; + chan->base = nbpf->base + NBPF_REG_CHAN_OFFSET + NBPF_REG_CHAN_SIZE * n; + INIT_LIST_HEAD(&chan->desc_page); + spin_lock_init(&chan->lock); + chan->dma_chan.device = dma_dev; + dma_cookie_init(&chan->dma_chan); + nbpf_chan_prepare_default(chan); + + dev_dbg(dma_dev->dev, "%s(): channel %d: -> %p\n", __func__, n, chan->base); + + snprintf(chan->name, sizeof(chan->name), "nbpf %d", n); + + tasklet_init(&chan->tasklet, nbpf_chan_tasklet, (unsigned long)chan); + ret = devm_request_irq(dma_dev->dev, chan->irq, + nbpf_chan_irq, IRQF_SHARED, + chan->name, chan); + if (ret < 0) + return ret; + + /* Add the channel to DMA device channel list */ + list_add_tail(&chan->dma_chan.device_node, + &dma_dev->channels); + + return 0; +} + +static const struct of_device_id nbpf_match[] = { + {.compatible = "renesas,nbpfaxi64dmac1b4", .data = &nbpf_cfg[NBPF1B4]}, + {.compatible = "renesas,nbpfaxi64dmac1b8", .data = &nbpf_cfg[NBPF1B8]}, + {.compatible = "renesas,nbpfaxi64dmac1b16", .data = &nbpf_cfg[NBPF1B16]}, + {.compatible = "renesas,nbpfaxi64dmac4b4", .data = &nbpf_cfg[NBPF4B4]}, + {.compatible = "renesas,nbpfaxi64dmac4b8", .data = &nbpf_cfg[NBPF4B8]}, + {.compatible = "renesas,nbpfaxi64dmac4b16", .data = &nbpf_cfg[NBPF4B16]}, + {.compatible = "renesas,nbpfaxi64dmac8b4", .data = &nbpf_cfg[NBPF8B4]}, + {.compatible = "renesas,nbpfaxi64dmac8b8", .data = &nbpf_cfg[NBPF8B8]}, + {.compatible = "renesas,nbpfaxi64dmac8b16", .data = &nbpf_cfg[NBPF8B16]}, + {} +}; +MODULE_DEVICE_TABLE(of, nbpf_match); + +static int nbpf_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *of_id = of_match_device(nbpf_match, dev); + struct device_node *np = dev->of_node; + struct nbpf_device *nbpf; + struct dma_device *dma_dev; + struct resource *iomem, *irq_res; + const struct nbpf_config *cfg; + int num_channels; + int ret, irq, eirq, i; + int irqbuf[9] /* maximum 8 channels + error IRQ */; + unsigned int irqs = 0; + + BUILD_BUG_ON(sizeof(struct nbpf_desc_page) > PAGE_SIZE); + + /* DT only */ + if (!np || !of_id || !of_id->data) + return -ENODEV; + + cfg = of_id->data; + num_channels = cfg->num_channels; + + nbpf = devm_kzalloc(dev, sizeof(*nbpf) + num_channels * + sizeof(nbpf->chan[0]), GFP_KERNEL); + if (!nbpf) { + dev_err(dev, "Memory allocation failed\n"); + return -ENOMEM; + } + dma_dev = &nbpf->dma_dev; + dma_dev->dev = dev; + + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + nbpf->base = devm_ioremap_resource(dev, iomem); + if (IS_ERR(nbpf->base)) + return PTR_ERR(nbpf->base); + + nbpf->clk = devm_clk_get(dev, NULL); + if (IS_ERR(nbpf->clk)) + return PTR_ERR(nbpf->clk); + + nbpf->config = cfg; + + for (i = 0; irqs < ARRAY_SIZE(irqbuf); i++) { + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, i); + if (!irq_res) + break; + + for (irq = irq_res->start; irq <= irq_res->end; + irq++, irqs++) + irqbuf[irqs] = irq; + } + + /* + * 3 IRQ resource schemes are supported: + * 1. 1 shared IRQ for error and all channels + * 2. 2 IRQs: one for error and one shared for all channels + * 3. 1 IRQ for error and an own IRQ for each channel + */ + if (irqs != 1 && irqs != 2 && irqs != num_channels + 1) + return -ENXIO; + + if (irqs == 1) { + eirq = irqbuf[0]; + + for (i = 0; i <= num_channels; i++) + nbpf->chan[i].irq = irqbuf[0]; + } else { + eirq = platform_get_irq_byname(pdev, "error"); + if (eirq < 0) + return eirq; + + if (irqs == num_channels + 1) { + struct nbpf_channel *chan; + + for (i = 0, chan = nbpf->chan; i <= num_channels; + i++, chan++) { + /* Skip the error IRQ */ + if (irqbuf[i] == eirq) + i++; + chan->irq = irqbuf[i]; + } + + if (chan != nbpf->chan + num_channels) + return -EINVAL; + } else { + /* 2 IRQs and more than one channel */ + if (irqbuf[0] == eirq) + irq = irqbuf[1]; + else + irq = irqbuf[0]; + + for (i = 0; i <= num_channels; i++) + nbpf->chan[i].irq = irq; + } + } + + ret = devm_request_irq(dev, eirq, nbpf_err_irq, + IRQF_SHARED, "dma error", nbpf); + if (ret < 0) + return ret; + + INIT_LIST_HEAD(&dma_dev->channels); + + /* Create DMA Channel */ + for (i = 0; i < num_channels; i++) { + ret = nbpf_chan_probe(nbpf, i); + if (ret < 0) + return ret; + } + + dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask); + dma_cap_set(DMA_SLAVE, dma_dev->cap_mask); + dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask); + dma_cap_set(DMA_SG, dma_dev->cap_mask); + + /* Common and MEMCPY operations */ + dma_dev->device_alloc_chan_resources + = nbpf_alloc_chan_resources; + dma_dev->device_free_chan_resources = nbpf_free_chan_resources; + dma_dev->device_prep_dma_sg = nbpf_prep_memcpy_sg; + dma_dev->device_prep_dma_memcpy = nbpf_prep_memcpy; + dma_dev->device_tx_status = nbpf_tx_status; + dma_dev->device_issue_pending = nbpf_issue_pending; + dma_dev->device_slave_caps = nbpf_slave_caps; + + /* + * If we drop support for unaligned MEMCPY buffer addresses and / or + * lengths by setting + * dma_dev->copy_align = 4; + * then we can set transfer length to 4 bytes in nbpf_prep_one() for + * DMA_MEM_TO_MEM + */ + + /* Compulsory for DMA_SLAVE fields */ + dma_dev->device_prep_slave_sg = nbpf_prep_slave_sg; + dma_dev->device_control = nbpf_control; + + platform_set_drvdata(pdev, nbpf); + + ret = clk_prepare_enable(nbpf->clk); + if (ret < 0) + return ret; + + nbpf_configure(nbpf); + + ret = dma_async_device_register(dma_dev); + if (ret < 0) + goto e_clk_off; + + ret = of_dma_controller_register(np, nbpf_of_xlate, nbpf); + if (ret < 0) + goto e_dma_dev_unreg; + + return 0; + +e_dma_dev_unreg: + dma_async_device_unregister(dma_dev); +e_clk_off: + clk_disable_unprepare(nbpf->clk); + + return ret; +} + +static int nbpf_remove(struct platform_device *pdev) +{ + struct nbpf_device *nbpf = platform_get_drvdata(pdev); + + of_dma_controller_free(pdev->dev.of_node); + dma_async_device_unregister(&nbpf->dma_dev); + clk_disable_unprepare(nbpf->clk); + + return 0; +} + +static struct platform_device_id nbpf_ids[] = { + {"nbpfaxi64dmac1b4", (kernel_ulong_t)&nbpf_cfg[NBPF1B4]}, + {"nbpfaxi64dmac1b8", (kernel_ulong_t)&nbpf_cfg[NBPF1B8]}, + {"nbpfaxi64dmac1b16", (kernel_ulong_t)&nbpf_cfg[NBPF1B16]}, + {"nbpfaxi64dmac4b4", (kernel_ulong_t)&nbpf_cfg[NBPF4B4]}, + {"nbpfaxi64dmac4b8", (kernel_ulong_t)&nbpf_cfg[NBPF4B8]}, + {"nbpfaxi64dmac4b16", (kernel_ulong_t)&nbpf_cfg[NBPF4B16]}, + {"nbpfaxi64dmac8b4", (kernel_ulong_t)&nbpf_cfg[NBPF8B4]}, + {"nbpfaxi64dmac8b8", (kernel_ulong_t)&nbpf_cfg[NBPF8B8]}, + {"nbpfaxi64dmac8b16", (kernel_ulong_t)&nbpf_cfg[NBPF8B16]}, + {}, +}; +MODULE_DEVICE_TABLE(platform, nbpf_ids); + +#ifdef CONFIG_PM_RUNTIME +static int nbpf_runtime_suspend(struct device *dev) +{ + struct nbpf_device *nbpf = platform_get_drvdata(to_platform_device(dev)); + clk_disable_unprepare(nbpf->clk); + return 0; +} + +static int nbpf_runtime_resume(struct device *dev) +{ + struct nbpf_device *nbpf = platform_get_drvdata(to_platform_device(dev)); + return clk_prepare_enable(nbpf->clk); +} +#endif + +static const struct dev_pm_ops nbpf_pm_ops = { + SET_RUNTIME_PM_OPS(nbpf_runtime_suspend, nbpf_runtime_resume, NULL) +}; + +static struct platform_driver nbpf_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "dma-nbpf", + .of_match_table = nbpf_match, + .pm = &nbpf_pm_ops, + }, + .id_table = nbpf_ids, + .probe = nbpf_probe, + .remove = nbpf_remove, +}; + +module_platform_driver(nbpf_driver); + +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); +MODULE_DESCRIPTION("dmaengine driver for NBPFAXI64* DMACs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/dma/of-dma.c b/drivers/dma/of-dma.c index e8fe9dc455f4..d5fbeaa1e7ba 100644 --- a/drivers/dma/of-dma.c +++ b/drivers/dma/of-dma.c @@ -218,3 +218,38 @@ struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec, &dma_spec->args[0]); } EXPORT_SYMBOL_GPL(of_dma_simple_xlate); + +/** + * of_dma_xlate_by_chan_id - Translate dt property to DMA channel by channel id + * @dma_spec: pointer to DMA specifier as found in the device tree + * @of_dma: pointer to DMA controller data + * + * This function can be used as the of xlate callback for DMA driver which wants + * to match the channel based on the channel id. When using this xlate function + * the #dma-cells propety of the DMA controller dt node needs to be set to 1. + * The data parameter of of_dma_controller_register must be a pointer to the + * dma_device struct the function should match upon. + * + * Returns pointer to appropriate dma channel on success or NULL on error. + */ +struct dma_chan *of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct dma_device *dev = ofdma->of_dma_data; + struct dma_chan *chan, *candidate = NULL; + + if (!dev || dma_spec->args_count != 1) + return NULL; + + list_for_each_entry(chan, &dev->channels, device_node) + if (chan->chan_id == dma_spec->args[0]) { + candidate = chan; + break; + } + + if (!candidate) + return NULL; + + return dma_get_slave_channel(candidate); +} +EXPORT_SYMBOL_GPL(of_dma_xlate_by_chan_id); diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c index b19f04f4390b..4cf7d9a950d7 100644 --- a/drivers/dma/omap-dma.c +++ b/drivers/dma/omap-dma.c @@ -853,8 +853,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_slave_sg( static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, - size_t period_len, enum dma_transfer_direction dir, unsigned long flags, - void *context) + size_t period_len, enum dma_transfer_direction dir, unsigned long flags) { struct omap_dmadev *od = to_omap_dma_dev(chan->device); struct omap_chan *c = to_omap_dma_chan(chan); diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 73fa9b7a10ab..d5149aacd2fe 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -33,26 +33,15 @@ #define PL330_MAX_IRQS 32 #define PL330_MAX_PERI 32 -enum pl330_srccachectrl { - SCCTRL0, /* Noncacheable and nonbufferable */ - SCCTRL1, /* Bufferable only */ - SCCTRL2, /* Cacheable, but do not allocate */ - SCCTRL3, /* Cacheable and bufferable, but do not allocate */ - SINVALID1, - SINVALID2, - SCCTRL6, /* Cacheable write-through, allocate on reads only */ - SCCTRL7, /* Cacheable write-back, allocate on reads only */ -}; - -enum pl330_dstcachectrl { - DCCTRL0, /* Noncacheable and nonbufferable */ - DCCTRL1, /* Bufferable only */ - DCCTRL2, /* Cacheable, but do not allocate */ - DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1, /* AWCACHE = 0x1000 */ - DINVALID2, - DCCTRL6, /* Cacheable write-through, allocate on writes only */ - DCCTRL7, /* Cacheable write-back, allocate on writes only */ +enum pl330_cachectrl { + CCTRL0, /* Noncacheable and nonbufferable */ + CCTRL1, /* Bufferable only */ + CCTRL2, /* Cacheable, but do not allocate */ + CCTRL3, /* Cacheable and bufferable, but do not allocate */ + INVALID1, /* AWCACHE = 0x1000 */ + INVALID2, + CCTRL6, /* Cacheable write-through, allocate on writes only */ + CCTRL7, /* Cacheable write-back, allocate on writes only */ }; enum pl330_byteswap { @@ -63,13 +52,6 @@ enum pl330_byteswap { SWAP_16, }; -enum pl330_reqtype { - MEMTOMEM, - MEMTODEV, - DEVTOMEM, - DEVTODEV, -}; - /* Register and Bit field Definitions */ #define DS 0x0 #define DS_ST_STOP 0x0 @@ -263,9 +245,6 @@ enum pl330_reqtype { */ #define MCODE_BUFF_PER_REQ 256 -/* If the _pl330_req is available to the client */ -#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND) - /* Use this _only_ to wait on transient states */ #define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax(); @@ -300,27 +279,6 @@ struct pl330_config { u32 irq_ns; }; -/* Handle to the DMAC provided to the PL330 core */ -struct pl330_info { - /* Owning device */ - struct device *dev; - /* Size of MicroCode buffers for each channel. */ - unsigned mcbufsz; - /* ioremap'ed address of PL330 registers. */ - void __iomem *base; - /* Client can freely use it. */ - void *client_data; - /* PL330 core data, Client must not touch it. */ - void *pl330_data; - /* Populated by the PL330 core driver during pl330_add */ - struct pl330_config pcfg; - /* - * If the DMAC has some reset mechanism, then the - * client may want to provide pointer to the method. - */ - void (*dmac_reset)(struct pl330_info *pi); -}; - /** * Request Configuration. * The PL330 core does not modify this and uses the last @@ -344,8 +302,8 @@ struct pl330_reqcfg { unsigned brst_len:5; unsigned brst_size:3; /* in power of 2 */ - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; + enum pl330_cachectrl dcctl; + enum pl330_cachectrl scctl; enum pl330_byteswap swap; struct pl330_config *pcfg; }; @@ -359,11 +317,6 @@ struct pl330_xfer { u32 dst_addr; /* Size to xfer */ u32 bytes; - /* - * Pointer to next xfer in the list. - * The last xfer in the req must point to NULL. - */ - struct pl330_xfer *next; }; /* The xfer callbacks are made with one of these arguments. */ @@ -376,67 +329,6 @@ enum pl330_op_err { PL330_ERR_FAIL, }; -/* A request defining Scatter-Gather List ending with NULL xfer. */ -struct pl330_req { - enum pl330_reqtype rqtype; - /* Index of peripheral for the xfer. */ - unsigned peri:5; - /* Unique token for this xfer, set by the client. */ - void *token; - /* Callback to be called after xfer. */ - void (*xfer_cb)(void *token, enum pl330_op_err err); - /* If NULL, req will be done at last set parameters. */ - struct pl330_reqcfg *cfg; - /* Pointer to first xfer in the request. */ - struct pl330_xfer *x; - /* Hook to attach to DMAC's list of reqs with due callback */ - struct list_head rqd; -}; - -/* - * To know the status of the channel and DMAC, the client - * provides a pointer to this structure. The PL330 core - * fills it with current information. - */ -struct pl330_chanstatus { - /* - * If the DMAC engine halted due to some error, - * the client should remove-add DMAC. - */ - bool dmac_halted; - /* - * If channel is halted due to some error, - * the client should ABORT/FLUSH and START the channel. - */ - bool faulting; - /* Location of last load */ - u32 src_addr; - /* Location of last store */ - u32 dst_addr; - /* - * Pointer to the currently active req, NULL if channel is - * inactive, even though the requests may be present. - */ - struct pl330_req *top_req; - /* Pointer to req waiting second in the queue if any. */ - struct pl330_req *wait_req; -}; - -enum pl330_chan_op { - /* Start the channel */ - PL330_OP_START, - /* Abort the active xfer */ - PL330_OP_ABORT, - /* Stop xfer and flush queue */ - PL330_OP_FLUSH, -}; - -struct _xfer_spec { - u32 ccr; - struct pl330_req *r; - struct pl330_xfer *x; -}; - enum dmamov_dst { SAR = 0, CCR, @@ -454,12 +346,12 @@ enum pl330_cond { ALWAYS, }; +struct dma_pl330_desc; + struct _pl330_req { u32 mc_bus; void *mc_cpu; - /* Number of bytes taken to setup MC for the req */ - u32 mc_len; - struct pl330_req *r; + struct dma_pl330_desc *desc; }; /* ToBeDone for tasklet */ @@ -491,30 +383,6 @@ enum pl330_dmac_state { DYING, }; -/* A DMAC */ -struct pl330_dmac { - spinlock_t lock; - /* Holds list of reqs with due callbacks */ - struct list_head req_done; - /* Pointer to platform specific stuff */ - struct pl330_info *pinfo; - /* Maximum possible events/irqs */ - int events[32]; - /* BUS address of MicroCode buffer */ - dma_addr_t mcode_bus; - /* CPU address of MicroCode buffer */ - void *mcode_cpu; - /* List of all Channel threads */ - struct pl330_thread *channels; - /* Pointer to the MANAGER thread */ - struct pl330_thread *manager; - /* To handle bad news in interrupt */ - struct tasklet_struct tasks; - struct _pl330_tbd dmac_tbd; - /* State of DMAC operation */ - enum pl330_dmac_state state; -}; - enum desc_status { /* In the DMAC pool */ FREE, @@ -555,15 +423,16 @@ struct dma_pl330_chan { * As the parent, this DMAC also provides descriptors * to the channel. */ - struct dma_pl330_dmac *dmac; + struct pl330_dmac *dmac; /* To protect channel manipulation */ spinlock_t lock; - /* Token of a hardware channel thread of PL330 DMAC - * NULL if the channel is available to be acquired. + /* + * Hardware channel thread of PL330 DMAC. NULL if the channel is + * available. */ - void *pl330_chid; + struct pl330_thread *thread; /* For D-to-M and M-to-D channels */ int burst_sz; /* the peripheral fifo width */ @@ -574,9 +443,7 @@ struct dma_pl330_chan { bool cyclic; }; -struct dma_pl330_dmac { - struct pl330_info pif; - +struct pl330_dmac { /* DMA-Engine Device */ struct dma_device ddma; @@ -588,6 +455,32 @@ struct dma_pl330_dmac { /* To protect desc_pool manipulation */ spinlock_t pool_lock; + /* Size of MicroCode buffers for each channel. */ + unsigned mcbufsz; + /* ioremap'ed address of PL330 registers. */ + void __iomem *base; + /* Populated by the PL330 core driver during pl330_add */ + struct pl330_config pcfg; + + spinlock_t lock; + /* Maximum possible events/irqs */ + int events[32]; + /* BUS address of MicroCode buffer */ + dma_addr_t mcode_bus; + /* CPU address of MicroCode buffer */ + void *mcode_cpu; + /* List of all Channel threads */ + struct pl330_thread *channels; + /* Pointer to the MANAGER thread */ + struct pl330_thread *manager; + /* To handle bad news in interrupt */ + struct tasklet_struct tasks; + struct _pl330_tbd dmac_tbd; + /* State of DMAC operation */ + enum pl330_dmac_state state; + /* Holds list of reqs with due callbacks */ + struct list_head req_done; + /* Peripheral channels connected to this DMAC */ unsigned int num_peripherals; struct dma_pl330_chan *peripherals; /* keep at end */ @@ -604,49 +497,43 @@ struct dma_pl330_desc { struct pl330_xfer px; struct pl330_reqcfg rqcfg; - struct pl330_req req; enum desc_status status; /* The channel which currently holds this desc */ struct dma_pl330_chan *pchan; + + enum dma_transfer_direction rqtype; + /* Index of peripheral for the xfer. */ + unsigned peri:5; + /* Hook to attach to DMAC's list of reqs with due callback */ + struct list_head rqd; }; -static inline void _callback(struct pl330_req *r, enum pl330_op_err err) -{ - if (r && r->xfer_cb) - r->xfer_cb(r->token, err); -} +struct _xfer_spec { + u32 ccr; + struct dma_pl330_desc *desc; +}; static inline bool _queue_empty(struct pl330_thread *thrd) { - return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1])) - ? true : false; + return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL; } static inline bool _queue_full(struct pl330_thread *thrd) { - return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1])) - ? false : true; + return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL; } static inline bool is_manager(struct pl330_thread *thrd) { - struct pl330_dmac *pl330 = thrd->dmac; - - /* MANAGER is indexed at the end */ - if (thrd->id == pl330->pinfo->pcfg.num_chan) - return true; - else - return false; + return thrd->dmac->manager == thrd; } /* If manager of the thread is in Non-Secure mode */ static inline bool _manager_ns(struct pl330_thread *thrd) { - struct pl330_dmac *pl330 = thrd->dmac; - - return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false; + return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false; } static inline u32 get_revision(u32 periph_id) @@ -1004,7 +891,7 @@ static inline u32 _emit_GO(unsigned dry_run, u8 buf[], /* Returns Time-Out */ static bool _until_dmac_idle(struct pl330_thread *thrd) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; unsigned long loops = msecs_to_loops(5); do { @@ -1024,7 +911,7 @@ static bool _until_dmac_idle(struct pl330_thread *thrd) static inline void _execute_DBGINSN(struct pl330_thread *thrd, u8 insn[], bool as_manager) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; u32 val; val = (insn[0] << 16) | (insn[1] << 24); @@ -1039,7 +926,7 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd, /* If timed out due to halted state-machine */ if (_until_dmac_idle(thrd)) { - dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n"); + dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n"); return; } @@ -1047,25 +934,9 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd, writel(0, regs + DBGCMD); } -/* - * Mark a _pl330_req as free. - * We do it by writing DMAEND as the first instruction - * because no valid request is going to have DMAEND as - * its first instruction to execute. - */ -static void mark_free(struct pl330_thread *thrd, int idx) -{ - struct _pl330_req *req = &thrd->req[idx]; - - _emit_END(0, req->mc_cpu); - req->mc_len = 0; - - thrd->req_running = -1; -} - static inline u32 _state(struct pl330_thread *thrd) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; u32 val; if (is_manager(thrd)) @@ -1123,7 +994,7 @@ static inline u32 _state(struct pl330_thread *thrd) static void _stop(struct pl330_thread *thrd) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; u8 insn[6] = {0, 0, 0, 0, 0, 0}; if (_state(thrd) == PL330_STATE_FAULT_COMPLETING) @@ -1146,9 +1017,9 @@ static void _stop(struct pl330_thread *thrd) /* Start doing req 'idx' of thread 'thrd' */ static bool _trigger(struct pl330_thread *thrd) { - void __iomem *regs = thrd->dmac->pinfo->base; + void __iomem *regs = thrd->dmac->base; struct _pl330_req *req; - struct pl330_req *r; + struct dma_pl330_desc *desc; struct _arg_GO go; unsigned ns; u8 insn[6] = {0, 0, 0, 0, 0, 0}; @@ -1159,32 +1030,27 @@ static bool _trigger(struct pl330_thread *thrd) return true; idx = 1 - thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) + if (thrd->req[idx].desc != NULL) { req = &thrd->req[idx]; - else { + } else { idx = thrd->lstenq; - if (!IS_FREE(&thrd->req[idx])) + if (thrd->req[idx].desc != NULL) req = &thrd->req[idx]; else req = NULL; } /* Return if no request */ - if (!req || !req->r) + if (!req) return true; - r = req->r; + desc = req->desc; - if (r->cfg) - ns = r->cfg->nonsecure ? 1 : 0; - else if (readl(regs + CS(thrd->id)) & CS_CNS) - ns = 1; - else - ns = 0; + ns = desc->rqcfg.nonsecure ? 1 : 0; /* See 'Abort Sources' point-4 at Page 2-25 */ if (_manager_ns(thrd) && !ns) - dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n", + dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n", __func__, __LINE__); go.chan = thrd->id; @@ -1240,7 +1106,7 @@ static inline int _ldst_memtomem(unsigned dry_run, u8 buf[], const struct _xfer_spec *pxs, int cyc) { int off = 0; - struct pl330_config *pcfg = pxs->r->cfg->pcfg; + struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg; /* check lock-up free version */ if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) { @@ -1266,10 +1132,10 @@ static inline int _ldst_devtomem(unsigned dry_run, u8 buf[], int off = 0; while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri); + off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->desc->peri); off += _emit_ST(dry_run, &buf[off], ALWAYS); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri); } return off; @@ -1281,10 +1147,10 @@ static inline int _ldst_memtodev(unsigned dry_run, u8 buf[], int off = 0; while (cyc--) { - off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri); + off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->desc->peri); off += _emit_LD(dry_run, &buf[off], ALWAYS); - off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri); - off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri); + off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->desc->peri); + off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri); } return off; @@ -1295,14 +1161,14 @@ static int _bursts(unsigned dry_run, u8 buf[], { int off = 0; - switch (pxs->r->rqtype) { - case MEMTODEV: + switch (pxs->desc->rqtype) { + case DMA_MEM_TO_DEV: off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc); break; - case DEVTOMEM: + case DMA_DEV_TO_MEM: off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc); break; - case MEMTOMEM: + case DMA_MEM_TO_MEM: off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc); break; default: @@ -1395,7 +1261,7 @@ static inline int _loop(unsigned dry_run, u8 buf[], static inline int _setup_loops(unsigned dry_run, u8 buf[], const struct _xfer_spec *pxs) { - struct pl330_xfer *x = pxs->x; + struct pl330_xfer *x = &pxs->desc->px; u32 ccr = pxs->ccr; unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr); int off = 0; @@ -1412,7 +1278,7 @@ static inline int _setup_loops(unsigned dry_run, u8 buf[], static inline int _setup_xfer(unsigned dry_run, u8 buf[], const struct _xfer_spec *pxs) { - struct pl330_xfer *x = pxs->x; + struct pl330_xfer *x = &pxs->desc->px; int off = 0; /* DMAMOV SAR, x->src_addr */ @@ -1443,17 +1309,12 @@ static int _setup_req(unsigned dry_run, struct pl330_thread *thrd, /* DMAMOV CCR, ccr */ off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr); - x = pxs->r->x; - do { - /* Error if xfer length is not aligned at burst size */ - if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) - return -EINVAL; - - pxs->x = x; - off += _setup_xfer(dry_run, &buf[off], pxs); + x = &pxs->desc->px; + /* Error if xfer length is not aligned at burst size */ + if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr))) + return -EINVAL; - x = x->next; - } while (x); + off += _setup_xfer(dry_run, &buf[off], pxs); /* DMASEV peripheral/event */ off += _emit_SEV(dry_run, &buf[off], thrd->ev); @@ -1495,31 +1356,15 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc) return ccr; } -static inline bool _is_valid(u32 ccr) -{ - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; - - dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK; - scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK; - - if (dcctl == DINVALID1 || dcctl == DINVALID2 - || scctl == SINVALID1 || scctl == SINVALID2) - return false; - else - return true; -} - /* * Submit a list of xfers after which the client wants notification. * Client is not notified after each xfer unit, just once after all * xfer units are done or some error occurs. */ -static int pl330_submit_req(void *ch_id, struct pl330_req *r) +static int pl330_submit_req(struct pl330_thread *thrd, + struct dma_pl330_desc *desc) { - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - struct pl330_info *pi; + struct pl330_dmac *pl330 = thrd->dmac; struct _xfer_spec xs; unsigned long flags; void __iomem *regs; @@ -1528,25 +1373,24 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r) int ret = 0; /* No Req or Unacquired Channel or DMAC */ - if (!r || !thrd || thrd->free) + if (!desc || !thrd || thrd->free) return -EINVAL; - pl330 = thrd->dmac; - pi = pl330->pinfo; - regs = pi->base; + regs = thrd->dmac->base; if (pl330->state == DYING || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) { - dev_info(thrd->dmac->pinfo->dev, "%s:%d\n", + dev_info(thrd->dmac->ddma.dev, "%s:%d\n", __func__, __LINE__); return -EAGAIN; } /* If request for non-existing peripheral */ - if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) { - dev_info(thrd->dmac->pinfo->dev, + if (desc->rqtype != DMA_MEM_TO_MEM && + desc->peri >= pl330->pcfg.num_peri) { + dev_info(thrd->dmac->ddma.dev, "%s:%d Invalid peripheral(%u)!\n", - __func__, __LINE__, r->peri); + __func__, __LINE__, desc->peri); return -EINVAL; } @@ -1557,41 +1401,26 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r) goto xfer_exit; } + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + desc->rqcfg.nonsecure = 0; + else + desc->rqcfg.nonsecure = 1; - /* Use last settings, if not provided */ - if (r->cfg) { - /* Prefer Secure Channel */ - if (!_manager_ns(thrd)) - r->cfg->nonsecure = 0; - else - r->cfg->nonsecure = 1; - - ccr = _prepare_ccr(r->cfg); - } else { - ccr = readl(regs + CC(thrd->id)); - } - - /* If this req doesn't have valid xfer settings */ - if (!_is_valid(ccr)) { - ret = -EINVAL; - dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n", - __func__, __LINE__, ccr); - goto xfer_exit; - } + ccr = _prepare_ccr(&desc->rqcfg); - idx = IS_FREE(&thrd->req[0]) ? 0 : 1; + idx = thrd->req[0].desc == NULL ? 0 : 1; xs.ccr = ccr; - xs.r = r; + xs.desc = desc; /* First dry run to check if req is acceptable */ ret = _setup_req(1, thrd, idx, &xs); if (ret < 0) goto xfer_exit; - if (ret > pi->mcbufsz / 2) { - dev_info(thrd->dmac->pinfo->dev, - "%s:%d Trying increasing mcbufsz\n", + if (ret > pl330->mcbufsz / 2) { + dev_info(pl330->ddma.dev, "%s:%d Trying increasing mcbufsz\n", __func__, __LINE__); ret = -ENOMEM; goto xfer_exit; @@ -1599,8 +1428,8 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r) /* Hook the request */ thrd->lstenq = idx; - thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs); - thrd->req[idx].r = r; + thrd->req[idx].desc = desc; + _setup_req(0, thrd, idx, &xs); ret = 0; @@ -1610,10 +1439,32 @@ xfer_exit: return ret; } +static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err) +{ + struct dma_pl330_chan *pch; + unsigned long flags; + + if (!desc) + return; + + pch = desc->pchan; + + /* If desc aborted */ + if (!pch) + return; + + spin_lock_irqsave(&pch->lock, flags); + + desc->status = DONE; + + spin_unlock_irqrestore(&pch->lock, flags); + + tasklet_schedule(&pch->task); +} + static void pl330_dotask(unsigned long data) { struct pl330_dmac *pl330 = (struct pl330_dmac *) data; - struct pl330_info *pi = pl330->pinfo; unsigned long flags; int i; @@ -1631,16 +1482,16 @@ static void pl330_dotask(unsigned long data) if (pl330->dmac_tbd.reset_mngr) { _stop(pl330->manager); /* Reset all channels */ - pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1; + pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1; /* Clear the reset flag */ pl330->dmac_tbd.reset_mngr = false; } - for (i = 0; i < pi->pcfg.num_chan; i++) { + for (i = 0; i < pl330->pcfg.num_chan; i++) { if (pl330->dmac_tbd.reset_chan & (1 << i)) { struct pl330_thread *thrd = &pl330->channels[i]; - void __iomem *regs = pi->base; + void __iomem *regs = pl330->base; enum pl330_op_err err; _stop(thrd); @@ -1651,16 +1502,13 @@ static void pl330_dotask(unsigned long data) err = PL330_ERR_ABORT; spin_unlock_irqrestore(&pl330->lock, flags); - - _callback(thrd->req[1 - thrd->lstenq].r, err); - _callback(thrd->req[thrd->lstenq].r, err); - + dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err); + dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err); spin_lock_irqsave(&pl330->lock, flags); - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); + thrd->req[0].desc = NULL; + thrd->req[1].desc = NULL; + thrd->req_running = -1; /* Clear the reset flag */ pl330->dmac_tbd.reset_chan &= ~(1 << i); @@ -1673,20 +1521,15 @@ static void pl330_dotask(unsigned long data) } /* Returns 1 if state was updated, 0 otherwise */ -static int pl330_update(const struct pl330_info *pi) +static int pl330_update(struct pl330_dmac *pl330) { - struct pl330_req *rqdone, *tmp; - struct pl330_dmac *pl330; + struct dma_pl330_desc *descdone, *tmp; unsigned long flags; void __iomem *regs; u32 val; int id, ev, ret = 0; - if (!pi || !pi->pl330_data) - return 0; - - regs = pi->base; - pl330 = pi->pl330_data; + regs = pl330->base; spin_lock_irqsave(&pl330->lock, flags); @@ -1696,13 +1539,13 @@ static int pl330_update(const struct pl330_info *pi) else pl330->dmac_tbd.reset_mngr = false; - val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1); + val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1); pl330->dmac_tbd.reset_chan |= val; if (val) { int i = 0; - while (i < pi->pcfg.num_chan) { + while (i < pl330->pcfg.num_chan) { if (val & (1 << i)) { - dev_info(pi->dev, + dev_info(pl330->ddma.dev, "Reset Channel-%d\t CS-%x FTC-%x\n", i, readl(regs + CS(i)), readl(regs + FTC(i))); @@ -1714,15 +1557,16 @@ static int pl330_update(const struct pl330_info *pi) /* Check which event happened i.e, thread notified */ val = readl(regs + ES); - if (pi->pcfg.num_events < 32 - && val & ~((1 << pi->pcfg.num_events) - 1)) { + if (pl330->pcfg.num_events < 32 + && val & ~((1 << pl330->pcfg.num_events) - 1)) { pl330->dmac_tbd.reset_dmac = true; - dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__); + dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__, + __LINE__); ret = 1; goto updt_exit; } - for (ev = 0; ev < pi->pcfg.num_events; ev++) { + for (ev = 0; ev < pl330->pcfg.num_events; ev++) { if (val & (1 << ev)) { /* Event occurred */ struct pl330_thread *thrd; u32 inten = readl(regs + INTEN); @@ -1743,25 +1587,22 @@ static int pl330_update(const struct pl330_info *pi) continue; /* Detach the req */ - rqdone = thrd->req[active].r; - thrd->req[active].r = NULL; - - mark_free(thrd, active); + descdone = thrd->req[active].desc; + thrd->req[active].desc = NULL; /* Get going again ASAP */ _start(thrd); /* For now, just make a list of callbacks to be done */ - list_add_tail(&rqdone->rqd, &pl330->req_done); + list_add_tail(&descdone->rqd, &pl330->req_done); } } /* Now that we are in no hurry, do the callbacks */ - list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) { - list_del(&rqdone->rqd); - + list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) { + list_del(&descdone->rqd); spin_unlock_irqrestore(&pl330->lock, flags); - _callback(rqdone, PL330_ERR_NONE); + dma_pl330_rqcb(descdone, PL330_ERR_NONE); spin_lock_irqsave(&pl330->lock, flags); } @@ -1778,65 +1619,13 @@ updt_exit: return ret; } -static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op) -{ - struct pl330_thread *thrd = ch_id; - struct pl330_dmac *pl330; - unsigned long flags; - int ret = 0, active; - - if (!thrd || thrd->free || thrd->dmac->state == DYING) - return -EINVAL; - - pl330 = thrd->dmac; - active = thrd->req_running; - - spin_lock_irqsave(&pl330->lock, flags); - - switch (op) { - case PL330_OP_FLUSH: - /* Make sure the channel is stopped */ - _stop(thrd); - - thrd->req[0].r = NULL; - thrd->req[1].r = NULL; - mark_free(thrd, 0); - mark_free(thrd, 1); - break; - - case PL330_OP_ABORT: - /* Make sure the channel is stopped */ - _stop(thrd); - - /* ABORT is only for the active req */ - if (active == -1) - break; - - thrd->req[active].r = NULL; - mark_free(thrd, active); - - /* Start the next */ - case PL330_OP_START: - if ((active == -1) && !_start(thrd)) - ret = -EIO; - break; - - default: - ret = -EINVAL; - } - - spin_unlock_irqrestore(&pl330->lock, flags); - return ret; -} - /* Reserve an event */ static inline int _alloc_event(struct pl330_thread *thrd) { struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; int ev; - for (ev = 0; ev < pi->pcfg.num_events; ev++) + for (ev = 0; ev < pl330->pcfg.num_events; ev++) if (pl330->events[ev] == -1) { pl330->events[ev] = thrd->id; return ev; @@ -1845,45 +1634,38 @@ static inline int _alloc_event(struct pl330_thread *thrd) return -1; } -static bool _chan_ns(const struct pl330_info *pi, int i) +static bool _chan_ns(const struct pl330_dmac *pl330, int i) { - return pi->pcfg.irq_ns & (1 << i); + return pl330->pcfg.irq_ns & (1 << i); } /* Upon success, returns IdentityToken for the * allocated channel, NULL otherwise. */ -static void *pl330_request_channel(const struct pl330_info *pi) +static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330) { struct pl330_thread *thrd = NULL; - struct pl330_dmac *pl330; unsigned long flags; int chans, i; - if (!pi || !pi->pl330_data) - return NULL; - - pl330 = pi->pl330_data; - if (pl330->state == DYING) return NULL; - chans = pi->pcfg.num_chan; + chans = pl330->pcfg.num_chan; spin_lock_irqsave(&pl330->lock, flags); for (i = 0; i < chans; i++) { thrd = &pl330->channels[i]; if ((thrd->free) && (!_manager_ns(thrd) || - _chan_ns(pi, i))) { + _chan_ns(pl330, i))) { thrd->ev = _alloc_event(thrd); if (thrd->ev >= 0) { thrd->free = false; thrd->lstenq = 1; - thrd->req[0].r = NULL; - mark_free(thrd, 0); - thrd->req[1].r = NULL; - mark_free(thrd, 1); + thrd->req[0].desc = NULL; + thrd->req[1].desc = NULL; + thrd->req_running = -1; break; } } @@ -1899,17 +1681,15 @@ static void *pl330_request_channel(const struct pl330_info *pi) static inline void _free_event(struct pl330_thread *thrd, int ev) { struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; /* If the event is valid and was held by the thread */ - if (ev >= 0 && ev < pi->pcfg.num_events + if (ev >= 0 && ev < pl330->pcfg.num_events && pl330->events[ev] == thrd->id) pl330->events[ev] = -1; } -static void pl330_release_channel(void *ch_id) +static void pl330_release_channel(struct pl330_thread *thrd) { - struct pl330_thread *thrd = ch_id; struct pl330_dmac *pl330; unsigned long flags; @@ -1918,8 +1698,8 @@ static void pl330_release_channel(void *ch_id) _stop(thrd); - _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT); - _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT); + dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT); + dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT); pl330 = thrd->dmac; @@ -1932,72 +1712,70 @@ static void pl330_release_channel(void *ch_id) /* Initialize the structure for PL330 configuration, that can be used * by the client driver the make best use of the DMAC */ -static void read_dmac_config(struct pl330_info *pi) +static void read_dmac_config(struct pl330_dmac *pl330) { - void __iomem *regs = pi->base; + void __iomem *regs = pl330->base; u32 val; val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT; val &= CRD_DATA_WIDTH_MASK; - pi->pcfg.data_bus_width = 8 * (1 << val); + pl330->pcfg.data_bus_width = 8 * (1 << val); val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT; val &= CRD_DATA_BUFF_MASK; - pi->pcfg.data_buf_dep = val + 1; + pl330->pcfg.data_buf_dep = val + 1; val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT; val &= CR0_NUM_CHANS_MASK; val += 1; - pi->pcfg.num_chan = val; + pl330->pcfg.num_chan = val; val = readl(regs + CR0); if (val & CR0_PERIPH_REQ_SET) { val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK; val += 1; - pi->pcfg.num_peri = val; - pi->pcfg.peri_ns = readl(regs + CR4); + pl330->pcfg.num_peri = val; + pl330->pcfg.peri_ns = readl(regs + CR4); } else { - pi->pcfg.num_peri = 0; + pl330->pcfg.num_peri = 0; } val = readl(regs + CR0); if (val & CR0_BOOT_MAN_NS) - pi->pcfg.mode |= DMAC_MODE_NS; + pl330->pcfg.mode |= DMAC_MODE_NS; else - pi->pcfg.mode &= ~DMAC_MODE_NS; + pl330->pcfg.mode &= ~DMAC_MODE_NS; val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT; val &= CR0_NUM_EVENTS_MASK; val += 1; - pi->pcfg.num_events = val; + pl330->pcfg.num_events = val; - pi->pcfg.irq_ns = readl(regs + CR3); + pl330->pcfg.irq_ns = readl(regs + CR3); } static inline void _reset_thread(struct pl330_thread *thrd) { struct pl330_dmac *pl330 = thrd->dmac; - struct pl330_info *pi = pl330->pinfo; thrd->req[0].mc_cpu = pl330->mcode_cpu - + (thrd->id * pi->mcbufsz); + + (thrd->id * pl330->mcbufsz); thrd->req[0].mc_bus = pl330->mcode_bus - + (thrd->id * pi->mcbufsz); - thrd->req[0].r = NULL; - mark_free(thrd, 0); + + (thrd->id * pl330->mcbufsz); + thrd->req[0].desc = NULL; thrd->req[1].mc_cpu = thrd->req[0].mc_cpu - + pi->mcbufsz / 2; + + pl330->mcbufsz / 2; thrd->req[1].mc_bus = thrd->req[0].mc_bus - + pi->mcbufsz / 2; - thrd->req[1].r = NULL; - mark_free(thrd, 1); + + pl330->mcbufsz / 2; + thrd->req[1].desc = NULL; + + thrd->req_running = -1; } static int dmac_alloc_threads(struct pl330_dmac *pl330) { - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; + int chans = pl330->pcfg.num_chan; struct pl330_thread *thrd; int i; @@ -2028,29 +1806,28 @@ static int dmac_alloc_threads(struct pl330_dmac *pl330) static int dmac_alloc_resources(struct pl330_dmac *pl330) { - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; + int chans = pl330->pcfg.num_chan; int ret; /* * Alloc MicroCode buffer for 'chans' Channel threads. * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN) */ - pl330->mcode_cpu = dma_alloc_coherent(pi->dev, - chans * pi->mcbufsz, + pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev, + chans * pl330->mcbufsz, &pl330->mcode_bus, GFP_KERNEL); if (!pl330->mcode_cpu) { - dev_err(pi->dev, "%s:%d Can't allocate memory!\n", + dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n", __func__, __LINE__); return -ENOMEM; } ret = dmac_alloc_threads(pl330); if (ret) { - dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n", + dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n", __func__, __LINE__); - dma_free_coherent(pi->dev, - chans * pi->mcbufsz, + dma_free_coherent(pl330->ddma.dev, + chans * pl330->mcbufsz, pl330->mcode_cpu, pl330->mcode_bus); return ret; } @@ -2058,71 +1835,45 @@ static int dmac_alloc_resources(struct pl330_dmac *pl330) return 0; } -static int pl330_add(struct pl330_info *pi) +static int pl330_add(struct pl330_dmac *pl330) { - struct pl330_dmac *pl330; void __iomem *regs; int i, ret; - if (!pi || !pi->dev) - return -EINVAL; - - /* If already added */ - if (pi->pl330_data) - return -EINVAL; - - /* - * If the SoC can perform reset on the DMAC, then do it - * before reading its configuration. - */ - if (pi->dmac_reset) - pi->dmac_reset(pi); - - regs = pi->base; + regs = pl330->base; /* Check if we can handle this DMAC */ - if ((pi->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) { - dev_err(pi->dev, "PERIPH_ID 0x%x !\n", pi->pcfg.periph_id); + if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) { + dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n", + pl330->pcfg.periph_id); return -EINVAL; } /* Read the configuration of the DMAC */ - read_dmac_config(pi); + read_dmac_config(pl330); - if (pi->pcfg.num_events == 0) { - dev_err(pi->dev, "%s:%d Can't work without events!\n", + if (pl330->pcfg.num_events == 0) { + dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n", __func__, __LINE__); return -EINVAL; } - pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL); - if (!pl330) { - dev_err(pi->dev, "%s:%d Can't allocate memory!\n", - __func__, __LINE__); - return -ENOMEM; - } - - /* Assign the info structure and private data */ - pl330->pinfo = pi; - pi->pl330_data = pl330; - spin_lock_init(&pl330->lock); INIT_LIST_HEAD(&pl330->req_done); /* Use default MC buffer size if not provided */ - if (!pi->mcbufsz) - pi->mcbufsz = MCODE_BUFF_PER_REQ * 2; + if (!pl330->mcbufsz) + pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2; /* Mark all events as free */ - for (i = 0; i < pi->pcfg.num_events; i++) + for (i = 0; i < pl330->pcfg.num_events; i++) pl330->events[i] = -1; /* Allocate resources needed by the DMAC */ ret = dmac_alloc_resources(pl330); if (ret) { - dev_err(pi->dev, "Unable to create channels for DMAC\n"); - kfree(pl330); + dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n"); return ret; } @@ -2135,15 +1886,13 @@ static int pl330_add(struct pl330_info *pi) static int dmac_free_threads(struct pl330_dmac *pl330) { - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; struct pl330_thread *thrd; int i; /* Release Channel threads */ - for (i = 0; i < chans; i++) { + for (i = 0; i < pl330->pcfg.num_chan; i++) { thrd = &pl330->channels[i]; - pl330_release_channel((void *)thrd); + pl330_release_channel(thrd); } /* Free memory */ @@ -2152,35 +1901,18 @@ static int dmac_free_threads(struct pl330_dmac *pl330) return 0; } -static void dmac_free_resources(struct pl330_dmac *pl330) +static void pl330_del(struct pl330_dmac *pl330) { - struct pl330_info *pi = pl330->pinfo; - int chans = pi->pcfg.num_chan; - - dmac_free_threads(pl330); - - dma_free_coherent(pi->dev, chans * pi->mcbufsz, - pl330->mcode_cpu, pl330->mcode_bus); -} - -static void pl330_del(struct pl330_info *pi) -{ - struct pl330_dmac *pl330; - - if (!pi || !pi->pl330_data) - return; - - pl330 = pi->pl330_data; - pl330->state = UNINIT; tasklet_kill(&pl330->tasks); /* Free DMAC resources */ - dmac_free_resources(pl330); + dmac_free_threads(pl330); - kfree(pl330); - pi->pl330_data = NULL; + dma_free_coherent(pl330->ddma.dev, + pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu, + pl330->mcode_bus); } /* forward declaration */ @@ -2212,8 +1944,7 @@ static inline void fill_queue(struct dma_pl330_chan *pch) if (desc->status == BUSY) continue; - ret = pl330_submit_req(pch->pl330_chid, - &desc->req); + ret = pl330_submit_req(pch->thread, desc); if (!ret) { desc->status = BUSY; } else if (ret == -EAGAIN) { @@ -2222,7 +1953,7 @@ static inline void fill_queue(struct dma_pl330_chan *pch) } else { /* Unacceptable request */ desc->status = DONE; - dev_err(pch->dmac->pif.dev, "%s:%d Bad Desc(%d)\n", + dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n", __func__, __LINE__, desc->txd.cookie); tasklet_schedule(&pch->task); } @@ -2249,7 +1980,9 @@ static void pl330_tasklet(unsigned long data) fill_queue(pch); /* Make sure the PL330 Channel thread is active */ - pl330_chan_ctrl(pch->pl330_chid, PL330_OP_START); + spin_lock(&pch->thread->dmac->lock); + _start(pch->thread); + spin_unlock(&pch->thread->dmac->lock); while (!list_empty(&pch->completed_list)) { dma_async_tx_callback callback; @@ -2280,25 +2013,6 @@ static void pl330_tasklet(unsigned long data) spin_unlock_irqrestore(&pch->lock, flags); } -static void dma_pl330_rqcb(void *token, enum pl330_op_err err) -{ - struct dma_pl330_desc *desc = token; - struct dma_pl330_chan *pch = desc->pchan; - unsigned long flags; - - /* If desc aborted */ - if (!pch) - return; - - spin_lock_irqsave(&pch->lock, flags); - - desc->status = DONE; - - spin_unlock_irqrestore(&pch->lock, flags); - - tasklet_schedule(&pch->task); -} - bool pl330_filter(struct dma_chan *chan, void *param) { u8 *peri_id; @@ -2315,23 +2029,26 @@ static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec, struct of_dma *ofdma) { int count = dma_spec->args_count; - struct dma_pl330_dmac *pdmac = ofdma->of_dma_data; + struct pl330_dmac *pl330 = ofdma->of_dma_data; unsigned int chan_id; + if (!pl330) + return NULL; + if (count != 1) return NULL; chan_id = dma_spec->args[0]; - if (chan_id >= pdmac->num_peripherals) + if (chan_id >= pl330->num_peripherals) return NULL; - return dma_get_slave_channel(&pdmac->peripherals[chan_id].chan); + return dma_get_slave_channel(&pl330->peripherals[chan_id].chan); } static int pl330_alloc_chan_resources(struct dma_chan *chan) { struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_dmac *pdmac = pch->dmac; + struct pl330_dmac *pl330 = pch->dmac; unsigned long flags; spin_lock_irqsave(&pch->lock, flags); @@ -2339,8 +2056,8 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan) dma_cookie_init(chan); pch->cyclic = false; - pch->pl330_chid = pl330_request_channel(&pdmac->pif); - if (!pch->pl330_chid) { + pch->thread = pl330_request_channel(pl330); + if (!pch->thread) { spin_unlock_irqrestore(&pch->lock, flags); return -ENOMEM; } @@ -2357,7 +2074,7 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned struct dma_pl330_chan *pch = to_pchan(chan); struct dma_pl330_desc *desc; unsigned long flags; - struct dma_pl330_dmac *pdmac = pch->dmac; + struct pl330_dmac *pl330 = pch->dmac; struct dma_slave_config *slave_config; LIST_HEAD(list); @@ -2365,8 +2082,13 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned case DMA_TERMINATE_ALL: spin_lock_irqsave(&pch->lock, flags); - /* FLUSH the PL330 Channel thread */ - pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH); + spin_lock(&pl330->lock); + _stop(pch->thread); + spin_unlock(&pl330->lock); + + pch->thread->req[0].desc = NULL; + pch->thread->req[1].desc = NULL; + pch->thread->req_running = -1; /* Mark all desc done */ list_for_each_entry(desc, &pch->submitted_list, node) { @@ -2384,9 +2106,9 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned dma_cookie_complete(&desc->txd); } - list_splice_tail_init(&pch->submitted_list, &pdmac->desc_pool); - list_splice_tail_init(&pch->work_list, &pdmac->desc_pool); - list_splice_tail_init(&pch->completed_list, &pdmac->desc_pool); + list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool); + list_splice_tail_init(&pch->work_list, &pl330->desc_pool); + list_splice_tail_init(&pch->completed_list, &pl330->desc_pool); spin_unlock_irqrestore(&pch->lock, flags); break; case DMA_SLAVE_CONFIG: @@ -2409,7 +2131,7 @@ static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned } break; default: - dev_err(pch->dmac->pif.dev, "Not supported command.\n"); + dev_err(pch->dmac->ddma.dev, "Not supported command.\n"); return -ENXIO; } @@ -2425,8 +2147,8 @@ static void pl330_free_chan_resources(struct dma_chan *chan) spin_lock_irqsave(&pch->lock, flags); - pl330_release_channel(pch->pl330_chid); - pch->pl330_chid = NULL; + pl330_release_channel(pch->thread); + pch->thread = NULL; if (pch->cyclic) list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool); @@ -2489,57 +2211,46 @@ static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx) static inline void _init_desc(struct dma_pl330_desc *desc) { - desc->req.x = &desc->px; - desc->req.token = desc; desc->rqcfg.swap = SWAP_NO; - desc->rqcfg.scctl = SCCTRL0; - desc->rqcfg.dcctl = DCCTRL0; - desc->req.cfg = &desc->rqcfg; - desc->req.xfer_cb = dma_pl330_rqcb; + desc->rqcfg.scctl = CCTRL0; + desc->rqcfg.dcctl = CCTRL0; desc->txd.tx_submit = pl330_tx_submit; INIT_LIST_HEAD(&desc->node); } /* Returns the number of descriptors added to the DMAC pool */ -static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count) +static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count) { struct dma_pl330_desc *desc; unsigned long flags; int i; - if (!pdmac) - return 0; - desc = kcalloc(count, sizeof(*desc), flg); if (!desc) return 0; - spin_lock_irqsave(&pdmac->pool_lock, flags); + spin_lock_irqsave(&pl330->pool_lock, flags); for (i = 0; i < count; i++) { _init_desc(&desc[i]); - list_add_tail(&desc[i].node, &pdmac->desc_pool); + list_add_tail(&desc[i].node, &pl330->desc_pool); } - spin_unlock_irqrestore(&pdmac->pool_lock, flags); + spin_unlock_irqrestore(&pl330->pool_lock, flags); return count; } -static struct dma_pl330_desc * -pluck_desc(struct dma_pl330_dmac *pdmac) +static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330) { struct dma_pl330_desc *desc = NULL; unsigned long flags; - if (!pdmac) - return NULL; - - spin_lock_irqsave(&pdmac->pool_lock, flags); + spin_lock_irqsave(&pl330->pool_lock, flags); - if (!list_empty(&pdmac->desc_pool)) { - desc = list_entry(pdmac->desc_pool.next, + if (!list_empty(&pl330->desc_pool)) { + desc = list_entry(pl330->desc_pool.next, struct dma_pl330_desc, node); list_del_init(&desc->node); @@ -2548,29 +2259,29 @@ pluck_desc(struct dma_pl330_dmac *pdmac) desc->txd.callback = NULL; } - spin_unlock_irqrestore(&pdmac->pool_lock, flags); + spin_unlock_irqrestore(&pl330->pool_lock, flags); return desc; } static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) { - struct dma_pl330_dmac *pdmac = pch->dmac; + struct pl330_dmac *pl330 = pch->dmac; u8 *peri_id = pch->chan.private; struct dma_pl330_desc *desc; /* Pluck one desc from the pool of DMAC */ - desc = pluck_desc(pdmac); + desc = pluck_desc(pl330); /* If the DMAC pool is empty, alloc new */ if (!desc) { - if (!add_desc(pdmac, GFP_ATOMIC, 1)) + if (!add_desc(pl330, GFP_ATOMIC, 1)) return NULL; /* Try again */ - desc = pluck_desc(pdmac); + desc = pluck_desc(pl330); if (!desc) { - dev_err(pch->dmac->pif.dev, + dev_err(pch->dmac->ddma.dev, "%s:%d ALERT!\n", __func__, __LINE__); return NULL; } @@ -2581,8 +2292,8 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) desc->txd.cookie = 0; async_tx_ack(&desc->txd); - desc->req.peri = peri_id ? pch->chan.chan_id : 0; - desc->rqcfg.pcfg = &pch->dmac->pif.pcfg; + desc->peri = peri_id ? pch->chan.chan_id : 0; + desc->rqcfg.pcfg = &pch->dmac->pcfg; dma_async_tx_descriptor_init(&desc->txd, &pch->chan); @@ -2592,7 +2303,6 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) static inline void fill_px(struct pl330_xfer *px, dma_addr_t dst, dma_addr_t src, size_t len) { - px->next = NULL; px->bytes = len; px->dst_addr = dst; px->src_addr = src; @@ -2605,7 +2315,7 @@ __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst, struct dma_pl330_desc *desc = pl330_get_desc(pch); if (!desc) { - dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n", + dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n", __func__, __LINE__); return NULL; } @@ -2629,11 +2339,11 @@ __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst, static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len) { struct dma_pl330_chan *pch = desc->pchan; - struct pl330_info *pi = &pch->dmac->pif; + struct pl330_dmac *pl330 = pch->dmac; int burst_len; - burst_len = pi->pcfg.data_bus_width / 8; - burst_len *= pi->pcfg.data_buf_dep; + burst_len = pl330->pcfg.data_bus_width / 8; + burst_len *= pl330->pcfg.data_buf_dep; burst_len >>= desc->rqcfg.brst_size; /* src/dst_burst_len can't be more than 16 */ @@ -2652,11 +2362,11 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len) static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t dma_addr, size_t len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct dma_pl330_desc *desc = NULL, *first = NULL; struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_dmac *pdmac = pch->dmac; + struct pl330_dmac *pl330 = pch->dmac; unsigned int i; dma_addr_t dst; dma_addr_t src; @@ -2665,7 +2375,7 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( return NULL; if (!is_slave_direction(direction)) { - dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n", + dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n", __func__, __LINE__); return NULL; } @@ -2673,23 +2383,23 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( for (i = 0; i < len / period_len; i++) { desc = pl330_get_desc(pch); if (!desc) { - dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n", + dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n", __func__, __LINE__); if (!first) return NULL; - spin_lock_irqsave(&pdmac->pool_lock, flags); + spin_lock_irqsave(&pl330->pool_lock, flags); while (!list_empty(&first->node)) { desc = list_entry(first->node.next, struct dma_pl330_desc, node); - list_move_tail(&desc->node, &pdmac->desc_pool); + list_move_tail(&desc->node, &pl330->desc_pool); } - list_move_tail(&first->node, &pdmac->desc_pool); + list_move_tail(&first->node, &pl330->desc_pool); - spin_unlock_irqrestore(&pdmac->pool_lock, flags); + spin_unlock_irqrestore(&pl330->pool_lock, flags); return NULL; } @@ -2698,14 +2408,12 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( case DMA_MEM_TO_DEV: desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 0; - desc->req.rqtype = MEMTODEV; src = dma_addr; dst = pch->fifo_addr; break; case DMA_DEV_TO_MEM: desc->rqcfg.src_inc = 0; desc->rqcfg.dst_inc = 1; - desc->req.rqtype = DEVTOMEM; src = pch->fifo_addr; dst = dma_addr; break; @@ -2713,6 +2421,7 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( break; } + desc->rqtype = direction; desc->rqcfg.brst_size = pch->burst_sz; desc->rqcfg.brst_len = 1; fill_px(&desc->px, dst, src, period_len); @@ -2740,24 +2449,22 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, { struct dma_pl330_desc *desc; struct dma_pl330_chan *pch = to_pchan(chan); - struct pl330_info *pi; + struct pl330_dmac *pl330 = pch->dmac; int burst; if (unlikely(!pch || !len)) return NULL; - pi = &pch->dmac->pif; - desc = __pl330_prep_dma_memcpy(pch, dst, src, len); if (!desc) return NULL; desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 1; - desc->req.rqtype = MEMTOMEM; + desc->rqtype = DMA_MEM_TO_MEM; /* Select max possible burst size */ - burst = pi->pcfg.data_bus_width / 8; + burst = pl330->pcfg.data_bus_width / 8; while (burst > 1) { if (!(len % burst)) @@ -2776,7 +2483,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, return &desc->txd; } -static void __pl330_giveback_desc(struct dma_pl330_dmac *pdmac, +static void __pl330_giveback_desc(struct pl330_dmac *pl330, struct dma_pl330_desc *first) { unsigned long flags; @@ -2785,17 +2492,17 @@ static void __pl330_giveback_desc(struct dma_pl330_dmac *pdmac, if (!first) return; - spin_lock_irqsave(&pdmac->pool_lock, flags); + spin_lock_irqsave(&pl330->pool_lock, flags); while (!list_empty(&first->node)) { desc = list_entry(first->node.next, struct dma_pl330_desc, node); - list_move_tail(&desc->node, &pdmac->desc_pool); + list_move_tail(&desc->node, &pl330->desc_pool); } - list_move_tail(&first->node, &pdmac->desc_pool); + list_move_tail(&first->node, &pl330->desc_pool); - spin_unlock_irqrestore(&pdmac->pool_lock, flags); + spin_unlock_irqrestore(&pl330->pool_lock, flags); } static struct dma_async_tx_descriptor * @@ -2820,12 +2527,12 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, desc = pl330_get_desc(pch); if (!desc) { - struct dma_pl330_dmac *pdmac = pch->dmac; + struct pl330_dmac *pl330 = pch->dmac; - dev_err(pch->dmac->pif.dev, + dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n", __func__, __LINE__); - __pl330_giveback_desc(pdmac, first); + __pl330_giveback_desc(pl330, first); return NULL; } @@ -2838,19 +2545,18 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (direction == DMA_MEM_TO_DEV) { desc->rqcfg.src_inc = 1; desc->rqcfg.dst_inc = 0; - desc->req.rqtype = MEMTODEV; fill_px(&desc->px, addr, sg_dma_address(sg), sg_dma_len(sg)); } else { desc->rqcfg.src_inc = 0; desc->rqcfg.dst_inc = 1; - desc->req.rqtype = DEVTOMEM; fill_px(&desc->px, sg_dma_address(sg), addr, sg_dma_len(sg)); } desc->rqcfg.brst_size = pch->burst_sz; desc->rqcfg.brst_len = 1; + desc->rqtype = direction; } /* Return the last desc in the chain */ @@ -2890,9 +2596,9 @@ static int pl330_probe(struct amba_device *adev, const struct amba_id *id) { struct dma_pl330_platdata *pdat; - struct dma_pl330_dmac *pdmac; + struct pl330_config *pcfg; + struct pl330_dmac *pl330; struct dma_pl330_chan *pch, *_p; - struct pl330_info *pi; struct dma_device *pd; struct resource *res; int i, ret, irq; @@ -2905,30 +2611,27 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) return ret; /* Allocate a new DMAC and its Channels */ - pdmac = devm_kzalloc(&adev->dev, sizeof(*pdmac), GFP_KERNEL); - if (!pdmac) { + pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL); + if (!pl330) { dev_err(&adev->dev, "unable to allocate mem\n"); return -ENOMEM; } - pi = &pdmac->pif; - pi->dev = &adev->dev; - pi->pl330_data = NULL; - pi->mcbufsz = pdat ? pdat->mcbuf_sz : 0; + pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0; res = &adev->res; - pi->base = devm_ioremap_resource(&adev->dev, res); - if (IS_ERR(pi->base)) - return PTR_ERR(pi->base); + pl330->base = devm_ioremap_resource(&adev->dev, res); + if (IS_ERR(pl330->base)) + return PTR_ERR(pl330->base); - amba_set_drvdata(adev, pdmac); + amba_set_drvdata(adev, pl330); for (i = 0; i < AMBA_NR_IRQS; i++) { irq = adev->irq[i]; if (irq) { ret = devm_request_irq(&adev->dev, irq, pl330_irq_handler, 0, - dev_name(&adev->dev), pi); + dev_name(&adev->dev), pl330); if (ret) return ret; } else { @@ -2936,38 +2639,40 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) } } - pi->pcfg.periph_id = adev->periphid; - ret = pl330_add(pi); + pcfg = &pl330->pcfg; + + pcfg->periph_id = adev->periphid; + ret = pl330_add(pl330); if (ret) return ret; - INIT_LIST_HEAD(&pdmac->desc_pool); - spin_lock_init(&pdmac->pool_lock); + INIT_LIST_HEAD(&pl330->desc_pool); + spin_lock_init(&pl330->pool_lock); /* Create a descriptor pool of default size */ - if (!add_desc(pdmac, GFP_KERNEL, NR_DEFAULT_DESC)) + if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC)) dev_warn(&adev->dev, "unable to allocate desc\n"); - pd = &pdmac->ddma; + pd = &pl330->ddma; INIT_LIST_HEAD(&pd->channels); /* Initialize channel parameters */ if (pdat) - num_chan = max_t(int, pdat->nr_valid_peri, pi->pcfg.num_chan); + num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan); else - num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan); + num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan); - pdmac->num_peripherals = num_chan; + pl330->num_peripherals = num_chan; - pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); - if (!pdmac->peripherals) { + pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); + if (!pl330->peripherals) { ret = -ENOMEM; - dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n"); + dev_err(&adev->dev, "unable to allocate pl330->peripherals\n"); goto probe_err2; } for (i = 0; i < num_chan; i++) { - pch = &pdmac->peripherals[i]; + pch = &pl330->peripherals[i]; if (!adev->dev.of_node) pch->chan.private = pdat ? &pdat->peri_id[i] : NULL; else @@ -2977,9 +2682,9 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) INIT_LIST_HEAD(&pch->work_list); INIT_LIST_HEAD(&pch->completed_list); spin_lock_init(&pch->lock); - pch->pl330_chid = NULL; + pch->thread = NULL; pch->chan.device = pd; - pch->dmac = pdmac; + pch->dmac = pl330; /* Add the channel to the DMAC list */ list_add_tail(&pch->chan.device_node, &pd->channels); @@ -2990,7 +2695,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) pd->cap_mask = pdat->cap_mask; } else { dma_cap_set(DMA_MEMCPY, pd->cap_mask); - if (pi->pcfg.num_peri) { + if (pcfg->num_peri) { dma_cap_set(DMA_SLAVE, pd->cap_mask); dma_cap_set(DMA_CYCLIC, pd->cap_mask); dma_cap_set(DMA_PRIVATE, pd->cap_mask); @@ -3015,14 +2720,14 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) if (adev->dev.of_node) { ret = of_dma_controller_register(adev->dev.of_node, - of_dma_pl330_xlate, pdmac); + of_dma_pl330_xlate, pl330); if (ret) { dev_err(&adev->dev, "unable to register DMA to the generic DT DMA helpers\n"); } } - adev->dev.dma_parms = &pdmac->dma_parms; + adev->dev.dma_parms = &pl330->dma_parms; /* * This is the limit for transfers with a buswidth of 1, larger @@ -3037,14 +2742,13 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) "Loaded driver for PL330 DMAC-%d\n", adev->periphid); dev_info(&adev->dev, "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n", - pi->pcfg.data_buf_dep, - pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan, - pi->pcfg.num_peri, pi->pcfg.num_events); + pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan, + pcfg->num_peri, pcfg->num_events); return 0; probe_err3: /* Idle the DMAC */ - list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels, + list_for_each_entry_safe(pch, _p, &pl330->ddma.channels, chan.device_node) { /* Remove the channel */ @@ -3055,27 +2759,23 @@ probe_err3: pl330_free_chan_resources(&pch->chan); } probe_err2: - pl330_del(pi); + pl330_del(pl330); return ret; } static int pl330_remove(struct amba_device *adev) { - struct dma_pl330_dmac *pdmac = amba_get_drvdata(adev); + struct pl330_dmac *pl330 = amba_get_drvdata(adev); struct dma_pl330_chan *pch, *_p; - struct pl330_info *pi; - - if (!pdmac) - return 0; if (adev->dev.of_node) of_dma_controller_free(adev->dev.of_node); - dma_async_device_unregister(&pdmac->ddma); + dma_async_device_unregister(&pl330->ddma); /* Idle the DMAC */ - list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels, + list_for_each_entry_safe(pch, _p, &pl330->ddma.channels, chan.device_node) { /* Remove the channel */ @@ -3086,9 +2786,7 @@ static int pl330_remove(struct amba_device *adev) pl330_free_chan_resources(&pch->chan); } - pi = &pdmac->pif; - - pl330_del(pi); + pl330_del(pl330); return 0; } diff --git a/drivers/dma/qcom_bam_dma.c b/drivers/dma/qcom_bam_dma.c index 82c923146e49..7a4bbb0f80a5 100644 --- a/drivers/dma/qcom_bam_dma.c +++ b/drivers/dma/qcom_bam_dma.c @@ -61,12 +61,17 @@ struct bam_desc_hw { #define DESC_FLAG_INT BIT(15) #define DESC_FLAG_EOT BIT(14) #define DESC_FLAG_EOB BIT(13) +#define DESC_FLAG_NWD BIT(12) struct bam_async_desc { struct virt_dma_desc vd; u32 num_desc; u32 xfer_len; + + /* transaction flags, EOT|EOB|NWD */ + u16 flags; + struct bam_desc_hw *curr_desc; enum dma_transfer_direction dir; @@ -490,6 +495,14 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan, if (!async_desc) goto err_out; + if (flags & DMA_PREP_FENCE) + async_desc->flags |= DESC_FLAG_NWD; + + if (flags & DMA_PREP_INTERRUPT) + async_desc->flags |= DESC_FLAG_EOT; + else + async_desc->flags |= DESC_FLAG_INT; + async_desc->num_desc = num_alloc; async_desc->curr_desc = async_desc->desc; async_desc->dir = direction; @@ -793,8 +806,11 @@ static void bam_start_dma(struct bam_chan *bchan) else async_desc->xfer_len = async_desc->num_desc; - /* set INT on last descriptor */ - desc[async_desc->xfer_len - 1].flags |= DESC_FLAG_INT; + /* set any special flags on the last descriptor */ + if (async_desc->num_desc == async_desc->xfer_len) + desc[async_desc->xfer_len - 1].flags = async_desc->flags; + else + desc[async_desc->xfer_len - 1].flags |= DESC_FLAG_INT; if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) { u32 partial = MAX_DESCRIPTORS - bchan->tail; diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c index 012520c9fd79..7416572d1e40 100644 --- a/drivers/dma/s3c24xx-dma.c +++ b/drivers/dma/s3c24xx-dma.c @@ -889,8 +889,7 @@ static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period, - enum dma_transfer_direction direction, unsigned long flags, - void *context) + enum dma_transfer_direction direction, unsigned long flags) { struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); struct s3c24xx_dma_engine *s3cdma = s3cchan->host; diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c index 5ebdfbc1051e..4b0ef043729a 100644 --- a/drivers/dma/sa11x0-dma.c +++ b/drivers/dma/sa11x0-dma.c @@ -612,7 +612,7 @@ static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( static struct dma_async_tx_descriptor *sa11x0_dma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period, - enum dma_transfer_direction dir, unsigned long flags, void *context) + enum dma_transfer_direction dir, unsigned long flags) { struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); struct sa11x0_dma_desc *txd; diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig index 0f719816c91b..0349125a2e20 100644 --- a/drivers/dma/sh/Kconfig +++ b/drivers/dma/sh/Kconfig @@ -2,21 +2,39 @@ # DMA engine configuration for sh # +# +# DMA Engine Helpers +# + config SH_DMAE_BASE bool "Renesas SuperH DMA Engine support" - depends on (SUPERH && SH_DMA) || ARCH_SHMOBILE || COMPILE_TEST + depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST + depends on !SUPERH || SH_DMA depends on !SH_DMA_API default y select DMA_ENGINE help Enable support for the Renesas SuperH DMA controllers. +# +# DMA Controllers +# + config SH_DMAE tristate "Renesas SuperH DMAC support" depends on SH_DMAE_BASE help Enable support for the Renesas SuperH DMA controllers. +if SH_DMAE + +config SH_DMAE_R8A73A4 + def_bool y + depends on ARCH_R8A73A4 + depends on OF + +endif + config SUDMAC tristate "Renesas SUDMAC support" depends on SH_DMAE_BASE @@ -34,7 +52,3 @@ config RCAR_AUDMAC_PP depends on SH_DMAE_BASE help Enable support for the Renesas R-Car Audio DMAC Peripheral Peripheral controllers. - -config SHDMA_R8A73A4 - def_bool y - depends on ARCH_R8A73A4 && SH_DMAE != n diff --git a/drivers/dma/sh/Makefile b/drivers/dma/sh/Makefile index 1ce88b28cfc6..0a5cfdb76e45 100644 --- a/drivers/dma/sh/Makefile +++ b/drivers/dma/sh/Makefile @@ -1,10 +1,18 @@ +# +# DMA Engine Helpers +# + obj-$(CONFIG_SH_DMAE_BASE) += shdma-base.o shdma-of.o -obj-$(CONFIG_SH_DMAE) += shdma.o + +# +# DMA Controllers +# + shdma-y := shdmac.o -ifeq ($(CONFIG_OF),y) -shdma-$(CONFIG_SHDMA_R8A73A4) += shdma-r8a73a4.o -endif +shdma-$(CONFIG_SH_DMAE_R8A73A4) += shdma-r8a73a4.o shdma-objs := $(shdma-y) +obj-$(CONFIG_SH_DMAE) += shdma.o + obj-$(CONFIG_SUDMAC) += sudmac.o obj-$(CONFIG_RCAR_HPB_DMAE) += rcar-hpbdma.o obj-$(CONFIG_RCAR_AUDMAC_PP) += rcar-audmapp.o diff --git a/drivers/dma/sh/rcar-audmapp.c b/drivers/dma/sh/rcar-audmapp.c index 2de77289a2e9..dabbf0aba2e9 100644 --- a/drivers/dma/sh/rcar-audmapp.c +++ b/drivers/dma/sh/rcar-audmapp.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/dmaengine.h> +#include <linux/of_dma.h> #include <linux/platform_data/dma-rcar-audmapp.h> #include <linux/platform_device.h> #include <linux/shdma-base.h> @@ -45,8 +46,9 @@ struct audmapp_chan { struct shdma_chan shdma_chan; - struct audmapp_slave_config *config; void __iomem *base; + dma_addr_t slave_addr; + u32 chcr; }; struct audmapp_device { @@ -56,7 +58,16 @@ struct audmapp_device { void __iomem *chan_reg; }; +struct audmapp_desc { + struct shdma_desc shdma_desc; + dma_addr_t src; + dma_addr_t dst; +}; + +#define to_shdma_chan(c) container_of(c, struct shdma_chan, dma_chan) + #define to_chan(chan) container_of(chan, struct audmapp_chan, shdma_chan) +#define to_desc(sdesc) container_of(sdesc, struct audmapp_desc, shdma_desc) #define to_dev(chan) container_of(chan->shdma_chan.dma_chan.device, \ struct audmapp_device, shdma_dev.dma_dev) @@ -90,70 +101,82 @@ static void audmapp_halt(struct shdma_chan *schan) } static void audmapp_start_xfer(struct shdma_chan *schan, - struct shdma_desc *sdecs) + struct shdma_desc *sdesc) { struct audmapp_chan *auchan = to_chan(schan); struct audmapp_device *audev = to_dev(auchan); - struct audmapp_slave_config *cfg = auchan->config; + struct audmapp_desc *desc = to_desc(sdesc); struct device *dev = audev->dev; - u32 chcr = cfg->chcr | PDMACHCR_DE; + u32 chcr = auchan->chcr | PDMACHCR_DE; - dev_dbg(dev, "src/dst/chcr = %pad/%pad/%x\n", - &cfg->src, &cfg->dst, cfg->chcr); + dev_dbg(dev, "src/dst/chcr = %pad/%pad/%08x\n", + &desc->src, &desc->dst, chcr); - audmapp_write(auchan, cfg->src, PDMASAR); - audmapp_write(auchan, cfg->dst, PDMADAR); + audmapp_write(auchan, desc->src, PDMASAR); + audmapp_write(auchan, desc->dst, PDMADAR); audmapp_write(auchan, chcr, PDMACHCR); } -static struct audmapp_slave_config * -audmapp_find_slave(struct audmapp_chan *auchan, int slave_id) +static void audmapp_get_config(struct audmapp_chan *auchan, int slave_id, + u32 *chcr, dma_addr_t *dst) { struct audmapp_device *audev = to_dev(auchan); struct audmapp_pdata *pdata = audev->pdata; struct audmapp_slave_config *cfg; int i; + *chcr = 0; + *dst = 0; + + if (!pdata) { /* DT */ + *chcr = ((u32)slave_id) << 16; + auchan->shdma_chan.slave_id = (slave_id) >> 8; + return; + } + + /* non-DT */ + if (slave_id >= AUDMAPP_SLAVE_NUMBER) - return NULL; + return; for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++) - if (cfg->slave_id == slave_id) - return cfg; - - return NULL; + if (cfg->slave_id == slave_id) { + *chcr = cfg->chcr; + *dst = cfg->dst; + break; + } } static int audmapp_set_slave(struct shdma_chan *schan, int slave_id, dma_addr_t slave_addr, bool try) { struct audmapp_chan *auchan = to_chan(schan); - struct audmapp_slave_config *cfg = - audmapp_find_slave(auchan, slave_id); + u32 chcr; + dma_addr_t dst; + + audmapp_get_config(auchan, slave_id, &chcr, &dst); - if (!cfg) - return -ENODEV; if (try) return 0; - auchan->config = cfg; + auchan->chcr = chcr; + auchan->slave_addr = slave_addr ? : dst; return 0; } static int audmapp_desc_setup(struct shdma_chan *schan, - struct shdma_desc *sdecs, + struct shdma_desc *sdesc, dma_addr_t src, dma_addr_t dst, size_t *len) { - struct audmapp_chan *auchan = to_chan(schan); - struct audmapp_slave_config *cfg = auchan->config; - - if (!cfg) - return -ENODEV; + struct audmapp_desc *desc = to_desc(sdesc); if (*len > (size_t)AUDMAPP_LEN_MAX) *len = (size_t)AUDMAPP_LEN_MAX; + desc->src = src; + desc->dst = dst; + return 0; } @@ -164,7 +187,9 @@ static void audmapp_setup_xfer(struct shdma_chan *schan, static dma_addr_t audmapp_slave_addr(struct shdma_chan *schan) { - return 0; /* always fixed address */ + struct audmapp_chan *auchan = to_chan(schan); + + return auchan->slave_addr; } static bool audmapp_channel_busy(struct shdma_chan *schan) @@ -183,7 +208,7 @@ static bool audmapp_desc_completed(struct shdma_chan *schan, static struct shdma_desc *audmapp_embedded_desc(void *buf, int i) { - return &((struct shdma_desc *)buf)[i]; + return &((struct audmapp_desc *)buf)[i].shdma_desc; } static const struct shdma_ops audmapp_shdma_ops = { @@ -234,16 +259,39 @@ static void audmapp_chan_remove(struct audmapp_device *audev) dma_dev->chancnt = 0; } +static struct dma_chan *audmapp_of_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + dma_cap_mask_t mask; + struct dma_chan *chan; + u32 chcr = dma_spec->args[0]; + + if (dma_spec->args_count != 1) + return NULL; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + chan = dma_request_channel(mask, shdma_chan_filter, NULL); + if (chan) + to_shdma_chan(chan)->hw_req = chcr; + + return chan; +} + static int audmapp_probe(struct platform_device *pdev) { struct audmapp_pdata *pdata = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; struct audmapp_device *audev; struct shdma_dev *sdev; struct dma_device *dma_dev; struct resource *res; int err, i; - if (!pdata) + if (np) + of_dma_controller_register(np, audmapp_of_xlate, pdev); + else if (!pdata) return -ENODEV; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -260,7 +308,7 @@ static int audmapp_probe(struct platform_device *pdev) sdev = &audev->shdma_dev; sdev->ops = &audmapp_shdma_ops; - sdev->desc_size = sizeof(struct shdma_desc); + sdev->desc_size = sizeof(struct audmapp_desc); dma_dev = &sdev->dma_dev; dma_dev->copy_align = LOG2_DEFAULT_XFER_SIZE; @@ -305,12 +353,18 @@ static int audmapp_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id audmapp_of_match[] = { + { .compatible = "renesas,rcar-audmapp", }, + {}, +}; + static struct platform_driver audmapp_driver = { .probe = audmapp_probe, .remove = audmapp_remove, .driver = { .owner = THIS_MODULE, .name = "rcar-audmapp-engine", + .of_match_table = audmapp_of_match, }, }; module_platform_driver(audmapp_driver); diff --git a/drivers/dma/sh/shdma-arm.h b/drivers/dma/sh/shdma-arm.h index a2b8258426c9..a1b0ef45d6a2 100644 --- a/drivers/dma/sh/shdma-arm.h +++ b/drivers/dma/sh/shdma-arm.h @@ -45,7 +45,7 @@ enum { ((((i) & TS_LOW_BIT) << TS_LOW_SHIFT) |\ (((i) & TS_HI_BIT) << TS_HI_SHIFT)) -#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz))) -#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz))) +#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | RS_ERS | TS_INDEX2VAL((xmit_sz))) +#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | RS_ERS | TS_INDEX2VAL((xmit_sz))) #endif diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c index b35007e21e6b..42d497416196 100644 --- a/drivers/dma/sh/shdma-base.c +++ b/drivers/dma/sh/shdma-base.c @@ -206,45 +206,6 @@ static int shdma_setup_slave(struct shdma_chan *schan, int slave_id, return 0; } -/* - * This is the standard shdma filter function to be used as a replacement to the - * "old" method, using the .private pointer. If for some reason you allocate a - * channel without slave data, use something like ERR_PTR(-EINVAL) as a filter - * parameter. If this filter is used, the slave driver, after calling - * dma_request_channel(), will also have to call dmaengine_slave_config() with - * .slave_id, .direction, and either .src_addr or .dst_addr set. - * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE - * capability! If this becomes a requirement, hardware glue drivers, using this - * services would have to provide their own filters, which first would check - * the device driver, similar to how other DMAC drivers, e.g., sa11x0-dma.c, do - * this, and only then, in case of a match, call this common filter. - * NOTE 2: This filter function is also used in the DT case by shdma_of_xlate(). - * In that case the MID-RID value is used for slave channel filtering and is - * passed to this function in the "arg" parameter. - */ -bool shdma_chan_filter(struct dma_chan *chan, void *arg) -{ - struct shdma_chan *schan = to_shdma_chan(chan); - struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device); - const struct shdma_ops *ops = sdev->ops; - int match = (long)arg; - int ret; - - if (match < 0) - /* No slave requested - arbitrary channel */ - return true; - - if (!schan->dev->of_node && match >= slave_num) - return false; - - ret = ops->set_slave(schan, match, 0, true); - if (ret < 0) - return false; - - return true; -} -EXPORT_SYMBOL(shdma_chan_filter); - static int shdma_alloc_chan_resources(struct dma_chan *chan) { struct shdma_chan *schan = to_shdma_chan(chan); @@ -295,6 +256,51 @@ esetslave: return ret; } +/* + * This is the standard shdma filter function to be used as a replacement to the + * "old" method, using the .private pointer. If for some reason you allocate a + * channel without slave data, use something like ERR_PTR(-EINVAL) as a filter + * parameter. If this filter is used, the slave driver, after calling + * dma_request_channel(), will also have to call dmaengine_slave_config() with + * .slave_id, .direction, and either .src_addr or .dst_addr set. + * NOTE: this filter doesn't support multiple DMAC drivers with the DMA_SLAVE + * capability! If this becomes a requirement, hardware glue drivers, using this + * services would have to provide their own filters, which first would check + * the device driver, similar to how other DMAC drivers, e.g., sa11x0-dma.c, do + * this, and only then, in case of a match, call this common filter. + * NOTE 2: This filter function is also used in the DT case by shdma_of_xlate(). + * In that case the MID-RID value is used for slave channel filtering and is + * passed to this function in the "arg" parameter. + */ +bool shdma_chan_filter(struct dma_chan *chan, void *arg) +{ + struct shdma_chan *schan; + struct shdma_dev *sdev; + int match = (long)arg; + int ret; + + /* Only support channels handled by this driver. */ + if (chan->device->device_alloc_chan_resources != + shdma_alloc_chan_resources) + return false; + + if (match < 0) + /* No slave requested - arbitrary channel */ + return true; + + schan = to_shdma_chan(chan); + if (!schan->dev->of_node && match >= slave_num) + return false; + + sdev = to_shdma_dev(schan->dma_chan.device); + ret = sdev->ops->set_slave(schan, match, 0, true); + if (ret < 0) + return false; + + return true; +} +EXPORT_SYMBOL(shdma_chan_filter); + static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all) { struct shdma_desc *desc, *_desc; @@ -662,15 +668,16 @@ static struct dma_async_tx_descriptor *shdma_prep_slave_sg( static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct shdma_chan *schan = to_shdma_chan(chan); struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device); + struct dma_async_tx_descriptor *desc; const struct shdma_ops *ops = sdev->ops; unsigned int sg_len = buf_len / period_len; int slave_id = schan->slave_id; dma_addr_t slave_addr; - struct scatterlist sgl[SHDMA_MAX_SG_LEN]; + struct scatterlist *sgl; int i; if (!chan) @@ -694,7 +701,16 @@ static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic( slave_addr = ops->slave_addr(schan); + /* + * Allocate the sg list dynamically as it would consumer too much stack + * space. + */ + sgl = kcalloc(sg_len, sizeof(*sgl), GFP_KERNEL); + if (!sgl) + return NULL; + sg_init_table(sgl, sg_len); + for (i = 0; i < sg_len; i++) { dma_addr_t src = buf_addr + (period_len * i); @@ -704,8 +720,11 @@ static struct dma_async_tx_descriptor *shdma_prep_dma_cyclic( sg_dma_len(&sgl[i]) = period_len; } - return shdma_prep_sg(schan, sgl, sg_len, &slave_addr, + desc = shdma_prep_sg(schan, sgl, sg_len, &slave_addr, direction, flags, true); + + kfree(sgl); + return desc; } static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, diff --git a/drivers/dma/sh/shdma.h b/drivers/dma/sh/shdma.h index 758a57b51875..2c0a969adc9f 100644 --- a/drivers/dma/sh/shdma.h +++ b/drivers/dma/sh/shdma.h @@ -62,7 +62,7 @@ struct sh_dmae_desc { #define to_sh_dev(chan) container_of(chan->shdma_chan.dma_chan.device,\ struct sh_dmae_device, shdma_dev.dma_dev) -#ifdef CONFIG_SHDMA_R8A73A4 +#ifdef CONFIG_SH_DMAE_R8A73A4 extern const struct sh_dmae_pdata r8a73a4_dma_pdata; #define r8a73a4_shdma_devid (&r8a73a4_dma_pdata) #else diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c index 146d5df926db..58eb85770eba 100644 --- a/drivers/dma/sh/shdmac.c +++ b/drivers/dma/sh/shdmac.c @@ -38,12 +38,12 @@ #include "../dmaengine.h" #include "shdma.h" -/* DMA register */ -#define SAR 0x00 -#define DAR 0x04 -#define TCR 0x08 -#define CHCR 0x0C -#define DMAOR 0x40 +/* DMA registers */ +#define SAR 0x00 /* Source Address Register */ +#define DAR 0x04 /* Destination Address Register */ +#define TCR 0x08 /* Transfer Count Register */ +#define CHCR 0x0C /* Channel Control Register */ +#define DMAOR 0x40 /* DMA Operation Register */ #define TEND 0x18 /* USB-DMAC */ @@ -239,9 +239,8 @@ static void dmae_init(struct sh_dmae_chan *sh_chan) { /* * Default configuration for dual address memory-memory transfer. - * 0x400 represents auto-request. */ - u32 chcr = DM_INC | SM_INC | 0x400 | log2size_to_chcr(sh_chan, + u32 chcr = DM_INC | SM_INC | RS_AUTO | log2size_to_chcr(sh_chan, LOG2_DEFAULT_XFER_SIZE); sh_chan->xmit_shift = calc_xmit_shift(sh_chan, chcr); chcr_write(sh_chan, chcr); diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c index 03f7820fa333..aac03ab10c54 100644 --- a/drivers/dma/sirf-dma.c +++ b/drivers/dma/sirf-dma.c @@ -580,7 +580,7 @@ err_dir: static struct dma_async_tx_descriptor * sirfsoc_dma_prep_cyclic(struct dma_chan *chan, dma_addr_t addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction direction, unsigned long flags, void *context) + enum dma_transfer_direction direction, unsigned long flags) { struct sirfsoc_dma_chan *schan = dma_chan_to_sirfsoc_dma_chan(chan); struct sirfsoc_dma_desc *sdesc = NULL; diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index c7984459ede7..5fe59335e247 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2531,8 +2531,7 @@ d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, static struct dma_async_tx_descriptor * dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction direction, unsigned long flags, - void *context) + enum dma_transfer_direction direction, unsigned long flags) { unsigned int periods = buf_len / period_len; struct dma_async_tx_descriptor *txd; diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c new file mode 100644 index 000000000000..1f92a56fd2b6 --- /dev/null +++ b/drivers/dma/sun6i-dma.c @@ -0,0 +1,1053 @@ +/* + * Copyright (C) 2013-2014 Allwinner Tech Co., Ltd + * Author: Sugar <shuge@allwinnertech.com> + * + * Copyright (C) 2014 Maxime Ripard + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/dmapool.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of_dma.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include "virt-dma.h" + +/* + * There's 16 physical channels that can work in parallel. + * + * However we have 30 different endpoints for our requests. + * + * Since the channels are able to handle only an unidirectional + * transfer, we need to allocate more virtual channels so that + * everyone can grab one channel. + * + * Some devices can't work in both direction (mostly because it + * wouldn't make sense), so we have a bit fewer virtual channels than + * 2 channels per endpoints. + */ + +#define NR_MAX_CHANNELS 16 +#define NR_MAX_REQUESTS 30 +#define NR_MAX_VCHANS 53 + +/* + * Common registers + */ +#define DMA_IRQ_EN(x) ((x) * 0x04) +#define DMA_IRQ_HALF BIT(0) +#define DMA_IRQ_PKG BIT(1) +#define DMA_IRQ_QUEUE BIT(2) + +#define DMA_IRQ_CHAN_NR 8 +#define DMA_IRQ_CHAN_WIDTH 4 + + +#define DMA_IRQ_STAT(x) ((x) * 0x04 + 0x10) + +#define DMA_STAT 0x30 + +/* + * Channels specific registers + */ +#define DMA_CHAN_ENABLE 0x00 +#define DMA_CHAN_ENABLE_START BIT(0) +#define DMA_CHAN_ENABLE_STOP 0 + +#define DMA_CHAN_PAUSE 0x04 +#define DMA_CHAN_PAUSE_PAUSE BIT(1) +#define DMA_CHAN_PAUSE_RESUME 0 + +#define DMA_CHAN_LLI_ADDR 0x08 + +#define DMA_CHAN_CUR_CFG 0x0c +#define DMA_CHAN_CFG_SRC_DRQ(x) ((x) & 0x1f) +#define DMA_CHAN_CFG_SRC_IO_MODE BIT(5) +#define DMA_CHAN_CFG_SRC_LINEAR_MODE (0 << 5) +#define DMA_CHAN_CFG_SRC_BURST(x) (((x) & 0x3) << 7) +#define DMA_CHAN_CFG_SRC_WIDTH(x) (((x) & 0x3) << 9) + +#define DMA_CHAN_CFG_DST_DRQ(x) (DMA_CHAN_CFG_SRC_DRQ(x) << 16) +#define DMA_CHAN_CFG_DST_IO_MODE (DMA_CHAN_CFG_SRC_IO_MODE << 16) +#define DMA_CHAN_CFG_DST_LINEAR_MODE (DMA_CHAN_CFG_SRC_LINEAR_MODE << 16) +#define DMA_CHAN_CFG_DST_BURST(x) (DMA_CHAN_CFG_SRC_BURST(x) << 16) +#define DMA_CHAN_CFG_DST_WIDTH(x) (DMA_CHAN_CFG_SRC_WIDTH(x) << 16) + +#define DMA_CHAN_CUR_SRC 0x10 + +#define DMA_CHAN_CUR_DST 0x14 + +#define DMA_CHAN_CUR_CNT 0x18 + +#define DMA_CHAN_CUR_PARA 0x1c + + +/* + * Various hardware related defines + */ +#define LLI_LAST_ITEM 0xfffff800 +#define NORMAL_WAIT 8 +#define DRQ_SDRAM 1 + +/* + * Hardware representation of the LLI + * + * The hardware will be fed the physical address of this structure, + * and read its content in order to start the transfer. + */ +struct sun6i_dma_lli { + u32 cfg; + u32 src; + u32 dst; + u32 len; + u32 para; + u32 p_lli_next; + + /* + * This field is not used by the DMA controller, but will be + * used by the CPU to go through the list (mostly for dumping + * or freeing it). + */ + struct sun6i_dma_lli *v_lli_next; +}; + + +struct sun6i_desc { + struct virt_dma_desc vd; + dma_addr_t p_lli; + struct sun6i_dma_lli *v_lli; +}; + +struct sun6i_pchan { + u32 idx; + void __iomem *base; + struct sun6i_vchan *vchan; + struct sun6i_desc *desc; + struct sun6i_desc *done; +}; + +struct sun6i_vchan { + struct virt_dma_chan vc; + struct list_head node; + struct dma_slave_config cfg; + struct sun6i_pchan *phy; + u8 port; +}; + +struct sun6i_dma_dev { + struct dma_device slave; + void __iomem *base; + struct clk *clk; + int irq; + spinlock_t lock; + struct reset_control *rstc; + struct tasklet_struct task; + atomic_t tasklet_shutdown; + struct list_head pending; + struct dma_pool *pool; + struct sun6i_pchan *pchans; + struct sun6i_vchan *vchans; +}; + +static struct device *chan2dev(struct dma_chan *chan) +{ + return &chan->dev->device; +} + +static inline struct sun6i_dma_dev *to_sun6i_dma_dev(struct dma_device *d) +{ + return container_of(d, struct sun6i_dma_dev, slave); +} + +static inline struct sun6i_vchan *to_sun6i_vchan(struct dma_chan *chan) +{ + return container_of(chan, struct sun6i_vchan, vc.chan); +} + +static inline struct sun6i_desc * +to_sun6i_desc(struct dma_async_tx_descriptor *tx) +{ + return container_of(tx, struct sun6i_desc, vd.tx); +} + +static inline void sun6i_dma_dump_com_regs(struct sun6i_dma_dev *sdev) +{ + dev_dbg(sdev->slave.dev, "Common register:\n" + "\tmask0(%04x): 0x%08x\n" + "\tmask1(%04x): 0x%08x\n" + "\tpend0(%04x): 0x%08x\n" + "\tpend1(%04x): 0x%08x\n" + "\tstats(%04x): 0x%08x\n", + DMA_IRQ_EN(0), readl(sdev->base + DMA_IRQ_EN(0)), + DMA_IRQ_EN(1), readl(sdev->base + DMA_IRQ_EN(1)), + DMA_IRQ_STAT(0), readl(sdev->base + DMA_IRQ_STAT(0)), + DMA_IRQ_STAT(1), readl(sdev->base + DMA_IRQ_STAT(1)), + DMA_STAT, readl(sdev->base + DMA_STAT)); +} + +static inline void sun6i_dma_dump_chan_regs(struct sun6i_dma_dev *sdev, + struct sun6i_pchan *pchan) +{ + phys_addr_t reg = virt_to_phys(pchan->base); + + dev_dbg(sdev->slave.dev, "Chan %d reg: %pa\n" + "\t___en(%04x): \t0x%08x\n" + "\tpause(%04x): \t0x%08x\n" + "\tstart(%04x): \t0x%08x\n" + "\t__cfg(%04x): \t0x%08x\n" + "\t__src(%04x): \t0x%08x\n" + "\t__dst(%04x): \t0x%08x\n" + "\tcount(%04x): \t0x%08x\n" + "\t_para(%04x): \t0x%08x\n\n", + pchan->idx, ®, + DMA_CHAN_ENABLE, + readl(pchan->base + DMA_CHAN_ENABLE), + DMA_CHAN_PAUSE, + readl(pchan->base + DMA_CHAN_PAUSE), + DMA_CHAN_LLI_ADDR, + readl(pchan->base + DMA_CHAN_LLI_ADDR), + DMA_CHAN_CUR_CFG, + readl(pchan->base + DMA_CHAN_CUR_CFG), + DMA_CHAN_CUR_SRC, + readl(pchan->base + DMA_CHAN_CUR_SRC), + DMA_CHAN_CUR_DST, + readl(pchan->base + DMA_CHAN_CUR_DST), + DMA_CHAN_CUR_CNT, + readl(pchan->base + DMA_CHAN_CUR_CNT), + DMA_CHAN_CUR_PARA, + readl(pchan->base + DMA_CHAN_CUR_PARA)); +} + +static inline int convert_burst(u32 maxburst, u8 *burst) +{ + switch (maxburst) { + case 1: + *burst = 0; + break; + case 8: + *burst = 2; + break; + default: + return -EINVAL; + } + + return 0; +} + +static inline int convert_buswidth(enum dma_slave_buswidth addr_width, u8 *width) +{ + if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) || + (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES)) + return -EINVAL; + + *width = addr_width >> 1; + return 0; +} + +static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev, + struct sun6i_dma_lli *next, + dma_addr_t next_phy, + struct sun6i_desc *txd) +{ + if ((!prev && !txd) || !next) + return NULL; + + if (!prev) { + txd->p_lli = next_phy; + txd->v_lli = next; + } else { + prev->p_lli_next = next_phy; + prev->v_lli_next = next; + } + + next->p_lli_next = LLI_LAST_ITEM; + next->v_lli_next = NULL; + + return next; +} + +static inline int sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli, + dma_addr_t src, + dma_addr_t dst, u32 len, + struct dma_slave_config *config) +{ + u8 src_width, dst_width, src_burst, dst_burst; + int ret; + + if (!config) + return -EINVAL; + + ret = convert_burst(config->src_maxburst, &src_burst); + if (ret) + return ret; + + ret = convert_burst(config->dst_maxburst, &dst_burst); + if (ret) + return ret; + + ret = convert_buswidth(config->src_addr_width, &src_width); + if (ret) + return ret; + + ret = convert_buswidth(config->dst_addr_width, &dst_width); + if (ret) + return ret; + + lli->cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) | + DMA_CHAN_CFG_SRC_WIDTH(src_width) | + DMA_CHAN_CFG_DST_BURST(dst_burst) | + DMA_CHAN_CFG_DST_WIDTH(dst_width); + + lli->src = src; + lli->dst = dst; + lli->len = len; + lli->para = NORMAL_WAIT; + + return 0; +} + +static inline void sun6i_dma_dump_lli(struct sun6i_vchan *vchan, + struct sun6i_dma_lli *lli) +{ + phys_addr_t p_lli = virt_to_phys(lli); + + dev_dbg(chan2dev(&vchan->vc.chan), + "\n\tdesc: p - %pa v - 0x%p\n" + "\t\tc - 0x%08x s - 0x%08x d - 0x%08x\n" + "\t\tl - 0x%08x p - 0x%08x n - 0x%08x\n", + &p_lli, lli, + lli->cfg, lli->src, lli->dst, + lli->len, lli->para, lli->p_lli_next); +} + +static void sun6i_dma_free_desc(struct virt_dma_desc *vd) +{ + struct sun6i_desc *txd = to_sun6i_desc(&vd->tx); + struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vd->tx.chan->device); + struct sun6i_dma_lli *v_lli, *v_next; + dma_addr_t p_lli, p_next; + + if (unlikely(!txd)) + return; + + p_lli = txd->p_lli; + v_lli = txd->v_lli; + + while (v_lli) { + v_next = v_lli->v_lli_next; + p_next = v_lli->p_lli_next; + + dma_pool_free(sdev->pool, v_lli, p_lli); + + v_lli = v_next; + p_lli = p_next; + } + + kfree(txd); +} + +static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan) +{ + struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device); + struct sun6i_pchan *pchan = vchan->phy; + unsigned long flags; + LIST_HEAD(head); + + spin_lock(&sdev->lock); + list_del_init(&vchan->node); + spin_unlock(&sdev->lock); + + spin_lock_irqsave(&vchan->vc.lock, flags); + + vchan_get_all_descriptors(&vchan->vc, &head); + + if (pchan) { + writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE); + writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE); + + vchan->phy = NULL; + pchan->vchan = NULL; + pchan->desc = NULL; + pchan->done = NULL; + } + + spin_unlock_irqrestore(&vchan->vc.lock, flags); + + vchan_dma_desc_free_list(&vchan->vc, &head); + + return 0; +} + +static int sun6i_dma_start_desc(struct sun6i_vchan *vchan) +{ + struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device); + struct virt_dma_desc *desc = vchan_next_desc(&vchan->vc); + struct sun6i_pchan *pchan = vchan->phy; + u32 irq_val, irq_reg, irq_offset; + + if (!pchan) + return -EAGAIN; + + if (!desc) { + pchan->desc = NULL; + pchan->done = NULL; + return -EAGAIN; + } + + list_del(&desc->node); + + pchan->desc = to_sun6i_desc(&desc->tx); + pchan->done = NULL; + + sun6i_dma_dump_lli(vchan, pchan->desc->v_lli); + + irq_reg = pchan->idx / DMA_IRQ_CHAN_NR; + irq_offset = pchan->idx % DMA_IRQ_CHAN_NR; + + irq_val = readl(sdev->base + DMA_IRQ_EN(irq_offset)); + irq_val |= DMA_IRQ_QUEUE << (irq_offset * DMA_IRQ_CHAN_WIDTH); + writel(irq_val, sdev->base + DMA_IRQ_EN(irq_offset)); + + writel(pchan->desc->p_lli, pchan->base + DMA_CHAN_LLI_ADDR); + writel(DMA_CHAN_ENABLE_START, pchan->base + DMA_CHAN_ENABLE); + + sun6i_dma_dump_com_regs(sdev); + sun6i_dma_dump_chan_regs(sdev, pchan); + + return 0; +} + +static void sun6i_dma_tasklet(unsigned long data) +{ + struct sun6i_dma_dev *sdev = (struct sun6i_dma_dev *)data; + struct sun6i_vchan *vchan; + struct sun6i_pchan *pchan; + unsigned int pchan_alloc = 0; + unsigned int pchan_idx; + + list_for_each_entry(vchan, &sdev->slave.channels, vc.chan.device_node) { + spin_lock_irq(&vchan->vc.lock); + + pchan = vchan->phy; + + if (pchan && pchan->done) { + if (sun6i_dma_start_desc(vchan)) { + /* + * No current txd associated with this channel + */ + dev_dbg(sdev->slave.dev, "pchan %u: free\n", + pchan->idx); + + /* Mark this channel free */ + vchan->phy = NULL; + pchan->vchan = NULL; + } + } + spin_unlock_irq(&vchan->vc.lock); + } + + spin_lock_irq(&sdev->lock); + for (pchan_idx = 0; pchan_idx < NR_MAX_CHANNELS; pchan_idx++) { + pchan = &sdev->pchans[pchan_idx]; + + if (pchan->vchan || list_empty(&sdev->pending)) + continue; + + vchan = list_first_entry(&sdev->pending, + struct sun6i_vchan, node); + + /* Remove from pending channels */ + list_del_init(&vchan->node); + pchan_alloc |= BIT(pchan_idx); + + /* Mark this channel allocated */ + pchan->vchan = vchan; + vchan->phy = pchan; + dev_dbg(sdev->slave.dev, "pchan %u: alloc vchan %p\n", + pchan->idx, &vchan->vc); + } + spin_unlock_irq(&sdev->lock); + + for (pchan_idx = 0; pchan_idx < NR_MAX_CHANNELS; pchan_idx++) { + if (!(pchan_alloc & BIT(pchan_idx))) + continue; + + pchan = sdev->pchans + pchan_idx; + vchan = pchan->vchan; + if (vchan) { + spin_lock_irq(&vchan->vc.lock); + sun6i_dma_start_desc(vchan); + spin_unlock_irq(&vchan->vc.lock); + } + } +} + +static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id) +{ + struct sun6i_dma_dev *sdev = dev_id; + struct sun6i_vchan *vchan; + struct sun6i_pchan *pchan; + int i, j, ret = IRQ_NONE; + u32 status; + + for (i = 0; i < 2; i++) { + status = readl(sdev->base + DMA_IRQ_STAT(i)); + if (!status) + continue; + + dev_dbg(sdev->slave.dev, "DMA irq status %s: 0x%x\n", + i ? "high" : "low", status); + + writel(status, sdev->base + DMA_IRQ_STAT(i)); + + for (j = 0; (j < 8) && status; j++) { + if (status & DMA_IRQ_QUEUE) { + pchan = sdev->pchans + j; + vchan = pchan->vchan; + + if (vchan) { + spin_lock(&vchan->vc.lock); + vchan_cookie_complete(&pchan->desc->vd); + pchan->done = pchan->desc; + spin_unlock(&vchan->vc.lock); + } + } + + status = status >> 4; + } + + if (!atomic_read(&sdev->tasklet_shutdown)) + tasklet_schedule(&sdev->task); + ret = IRQ_HANDLED; + } + + return ret; +} + +static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy( + struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, + size_t len, unsigned long flags) +{ + struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device); + struct sun6i_vchan *vchan = to_sun6i_vchan(chan); + struct dma_slave_config *sconfig = &vchan->cfg; + struct sun6i_dma_lli *v_lli; + struct sun6i_desc *txd; + dma_addr_t p_lli; + int ret; + + dev_dbg(chan2dev(chan), + "%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n", + __func__, vchan->vc.chan.chan_id, &dest, &src, len, flags); + + if (!len) + return NULL; + + txd = kzalloc(sizeof(*txd), GFP_NOWAIT); + if (!txd) + return NULL; + + v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli); + if (!v_lli) { + dev_err(sdev->slave.dev, "Failed to alloc lli memory\n"); + goto err_txd_free; + } + + ret = sun6i_dma_cfg_lli(v_lli, src, dest, len, sconfig); + if (ret) + goto err_dma_free; + + v_lli->cfg |= DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) | + DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) | + DMA_CHAN_CFG_DST_LINEAR_MODE | + DMA_CHAN_CFG_SRC_LINEAR_MODE; + + sun6i_dma_lli_add(NULL, v_lli, p_lli, txd); + + sun6i_dma_dump_lli(vchan, v_lli); + + return vchan_tx_prep(&vchan->vc, &txd->vd, flags); + +err_dma_free: + dma_pool_free(sdev->pool, v_lli, p_lli); +err_txd_free: + kfree(txd); + return NULL; +} + +static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_transfer_direction dir, + unsigned long flags, void *context) +{ + struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device); + struct sun6i_vchan *vchan = to_sun6i_vchan(chan); + struct dma_slave_config *sconfig = &vchan->cfg; + struct sun6i_dma_lli *v_lli, *prev = NULL; + struct sun6i_desc *txd; + struct scatterlist *sg; + dma_addr_t p_lli; + int i, ret; + + if (!sgl) + return NULL; + + if (!is_slave_direction(dir)) { + dev_err(chan2dev(chan), "Invalid DMA direction\n"); + return NULL; + } + + txd = kzalloc(sizeof(*txd), GFP_NOWAIT); + if (!txd) + return NULL; + + for_each_sg(sgl, sg, sg_len, i) { + v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli); + if (!v_lli) + goto err_lli_free; + + if (dir == DMA_MEM_TO_DEV) { + ret = sun6i_dma_cfg_lli(v_lli, sg_dma_address(sg), + sconfig->dst_addr, sg_dma_len(sg), + sconfig); + if (ret) + goto err_cur_lli_free; + + v_lli->cfg |= DMA_CHAN_CFG_DST_IO_MODE | + DMA_CHAN_CFG_SRC_LINEAR_MODE | + DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) | + DMA_CHAN_CFG_DST_DRQ(vchan->port); + + dev_dbg(chan2dev(chan), + "%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n", + __func__, vchan->vc.chan.chan_id, + &sconfig->dst_addr, &sg_dma_address(sg), + sg_dma_len(sg), flags); + + } else { + ret = sun6i_dma_cfg_lli(v_lli, sconfig->src_addr, + sg_dma_address(sg), sg_dma_len(sg), + sconfig); + if (ret) + goto err_cur_lli_free; + + v_lli->cfg |= DMA_CHAN_CFG_DST_LINEAR_MODE | + DMA_CHAN_CFG_SRC_IO_MODE | + DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) | + DMA_CHAN_CFG_SRC_DRQ(vchan->port); + + dev_dbg(chan2dev(chan), + "%s; chan: %d, dest: %pad, src: %pad, len: %u. flags: 0x%08lx\n", + __func__, vchan->vc.chan.chan_id, + &sg_dma_address(sg), &sconfig->src_addr, + sg_dma_len(sg), flags); + } + + prev = sun6i_dma_lli_add(prev, v_lli, p_lli, txd); + } + + dev_dbg(chan2dev(chan), "First: %pad\n", &txd->p_lli); + for (prev = txd->v_lli; prev; prev = prev->v_lli_next) + sun6i_dma_dump_lli(vchan, prev); + + return vchan_tx_prep(&vchan->vc, &txd->vd, flags); + +err_cur_lli_free: + dma_pool_free(sdev->pool, v_lli, p_lli); +err_lli_free: + for (prev = txd->v_lli; prev; prev = prev->v_lli_next) + dma_pool_free(sdev->pool, prev, virt_to_phys(prev)); + kfree(txd); + return NULL; +} + +static int sun6i_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device); + struct sun6i_vchan *vchan = to_sun6i_vchan(chan); + struct sun6i_pchan *pchan = vchan->phy; + unsigned long flags; + int ret = 0; + + switch (cmd) { + case DMA_RESUME: + dev_dbg(chan2dev(chan), "vchan %p: resume\n", &vchan->vc); + + spin_lock_irqsave(&vchan->vc.lock, flags); + + if (pchan) { + writel(DMA_CHAN_PAUSE_RESUME, + pchan->base + DMA_CHAN_PAUSE); + } else if (!list_empty(&vchan->vc.desc_issued)) { + spin_lock(&sdev->lock); + list_add_tail(&vchan->node, &sdev->pending); + spin_unlock(&sdev->lock); + } + + spin_unlock_irqrestore(&vchan->vc.lock, flags); + break; + + case DMA_PAUSE: + dev_dbg(chan2dev(chan), "vchan %p: pause\n", &vchan->vc); + + if (pchan) { + writel(DMA_CHAN_PAUSE_PAUSE, + pchan->base + DMA_CHAN_PAUSE); + } else { + spin_lock(&sdev->lock); + list_del_init(&vchan->node); + spin_unlock(&sdev->lock); + } + break; + + case DMA_TERMINATE_ALL: + ret = sun6i_dma_terminate_all(vchan); + break; + case DMA_SLAVE_CONFIG: + memcpy(&vchan->cfg, (void *)arg, sizeof(struct dma_slave_config)); + break; + default: + ret = -ENXIO; + break; + } + return ret; +} + +static enum dma_status sun6i_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, + struct dma_tx_state *state) +{ + struct sun6i_vchan *vchan = to_sun6i_vchan(chan); + struct sun6i_pchan *pchan = vchan->phy; + struct sun6i_dma_lli *lli; + struct virt_dma_desc *vd; + struct sun6i_desc *txd; + enum dma_status ret; + unsigned long flags; + size_t bytes = 0; + + ret = dma_cookie_status(chan, cookie, state); + if (ret == DMA_COMPLETE) + return ret; + + spin_lock_irqsave(&vchan->vc.lock, flags); + + vd = vchan_find_desc(&vchan->vc, cookie); + txd = to_sun6i_desc(&vd->tx); + + if (vd) { + for (lli = txd->v_lli; lli != NULL; lli = lli->v_lli_next) + bytes += lli->len; + } else if (!pchan || !pchan->desc) { + bytes = 0; + } else { + bytes = readl(pchan->base + DMA_CHAN_CUR_CNT); + } + + spin_unlock_irqrestore(&vchan->vc.lock, flags); + + dma_set_residue(state, bytes); + + return ret; +} + +static void sun6i_dma_issue_pending(struct dma_chan *chan) +{ + struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device); + struct sun6i_vchan *vchan = to_sun6i_vchan(chan); + unsigned long flags; + + spin_lock_irqsave(&vchan->vc.lock, flags); + + if (vchan_issue_pending(&vchan->vc)) { + spin_lock(&sdev->lock); + + if (!vchan->phy && list_empty(&vchan->node)) { + list_add_tail(&vchan->node, &sdev->pending); + tasklet_schedule(&sdev->task); + dev_dbg(chan2dev(chan), "vchan %p: issued\n", + &vchan->vc); + } + + spin_unlock(&sdev->lock); + } else { + dev_dbg(chan2dev(chan), "vchan %p: nothing to issue\n", + &vchan->vc); + } + + spin_unlock_irqrestore(&vchan->vc.lock, flags); +} + +static int sun6i_dma_alloc_chan_resources(struct dma_chan *chan) +{ + return 0; +} + +static void sun6i_dma_free_chan_resources(struct dma_chan *chan) +{ + struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device); + struct sun6i_vchan *vchan = to_sun6i_vchan(chan); + unsigned long flags; + + spin_lock_irqsave(&sdev->lock, flags); + list_del_init(&vchan->node); + spin_unlock_irqrestore(&sdev->lock, flags); + + vchan_free_chan_resources(&vchan->vc); +} + +static struct dma_chan *sun6i_dma_of_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct sun6i_dma_dev *sdev = ofdma->of_dma_data; + struct sun6i_vchan *vchan; + struct dma_chan *chan; + u8 port = dma_spec->args[0]; + + if (port > NR_MAX_REQUESTS) + return NULL; + + chan = dma_get_any_slave_channel(&sdev->slave); + if (!chan) + return NULL; + + vchan = to_sun6i_vchan(chan); + vchan->port = port; + + return chan; +} + +static inline void sun6i_kill_tasklet(struct sun6i_dma_dev *sdev) +{ + /* Disable all interrupts from DMA */ + writel(0, sdev->base + DMA_IRQ_EN(0)); + writel(0, sdev->base + DMA_IRQ_EN(1)); + + /* Prevent spurious interrupts from scheduling the tasklet */ + atomic_inc(&sdev->tasklet_shutdown); + + /* Make sure we won't have any further interrupts */ + devm_free_irq(sdev->slave.dev, sdev->irq, sdev); + + /* Actually prevent the tasklet from being scheduled */ + tasklet_kill(&sdev->task); +} + +static inline void sun6i_dma_free(struct sun6i_dma_dev *sdev) +{ + int i; + + for (i = 0; i < NR_MAX_VCHANS; i++) { + struct sun6i_vchan *vchan = &sdev->vchans[i]; + + list_del(&vchan->vc.chan.device_node); + tasklet_kill(&vchan->vc.task); + } +} + +static int sun6i_dma_probe(struct platform_device *pdev) +{ + struct sun6i_dma_dev *sdc; + struct resource *res; + struct clk *mux, *pll6; + int ret, i; + + sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL); + if (!sdc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sdc->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(sdc->base)) + return PTR_ERR(sdc->base); + + sdc->irq = platform_get_irq(pdev, 0); + if (sdc->irq < 0) { + dev_err(&pdev->dev, "Cannot claim IRQ\n"); + return sdc->irq; + } + + sdc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(sdc->clk)) { + dev_err(&pdev->dev, "No clock specified\n"); + return PTR_ERR(sdc->clk); + } + + mux = clk_get(NULL, "ahb1_mux"); + if (IS_ERR(mux)) { + dev_err(&pdev->dev, "Couldn't get AHB1 Mux\n"); + return PTR_ERR(mux); + } + + pll6 = clk_get(NULL, "pll6"); + if (IS_ERR(pll6)) { + dev_err(&pdev->dev, "Couldn't get PLL6\n"); + clk_put(mux); + return PTR_ERR(pll6); + } + + ret = clk_set_parent(mux, pll6); + clk_put(pll6); + clk_put(mux); + + if (ret) { + dev_err(&pdev->dev, "Couldn't reparent AHB1 on PLL6\n"); + return ret; + } + + sdc->rstc = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(sdc->rstc)) { + dev_err(&pdev->dev, "No reset controller specified\n"); + return PTR_ERR(sdc->rstc); + } + + sdc->pool = dmam_pool_create(dev_name(&pdev->dev), &pdev->dev, + sizeof(struct sun6i_dma_lli), 4, 0); + if (!sdc->pool) { + dev_err(&pdev->dev, "No memory for descriptors dma pool\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, sdc); + INIT_LIST_HEAD(&sdc->pending); + spin_lock_init(&sdc->lock); + + dma_cap_set(DMA_PRIVATE, sdc->slave.cap_mask); + dma_cap_set(DMA_MEMCPY, sdc->slave.cap_mask); + dma_cap_set(DMA_SLAVE, sdc->slave.cap_mask); + + INIT_LIST_HEAD(&sdc->slave.channels); + sdc->slave.device_alloc_chan_resources = sun6i_dma_alloc_chan_resources; + sdc->slave.device_free_chan_resources = sun6i_dma_free_chan_resources; + sdc->slave.device_tx_status = sun6i_dma_tx_status; + sdc->slave.device_issue_pending = sun6i_dma_issue_pending; + sdc->slave.device_prep_slave_sg = sun6i_dma_prep_slave_sg; + sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy; + sdc->slave.device_control = sun6i_dma_control; + sdc->slave.chancnt = NR_MAX_VCHANS; + + sdc->slave.dev = &pdev->dev; + + sdc->pchans = devm_kcalloc(&pdev->dev, NR_MAX_CHANNELS, + sizeof(struct sun6i_pchan), GFP_KERNEL); + if (!sdc->pchans) + return -ENOMEM; + + sdc->vchans = devm_kcalloc(&pdev->dev, NR_MAX_VCHANS, + sizeof(struct sun6i_vchan), GFP_KERNEL); + if (!sdc->vchans) + return -ENOMEM; + + tasklet_init(&sdc->task, sun6i_dma_tasklet, (unsigned long)sdc); + + for (i = 0; i < NR_MAX_CHANNELS; i++) { + struct sun6i_pchan *pchan = &sdc->pchans[i]; + + pchan->idx = i; + pchan->base = sdc->base + 0x100 + i * 0x40; + } + + for (i = 0; i < NR_MAX_VCHANS; i++) { + struct sun6i_vchan *vchan = &sdc->vchans[i]; + + INIT_LIST_HEAD(&vchan->node); + vchan->vc.desc_free = sun6i_dma_free_desc; + vchan_init(&vchan->vc, &sdc->slave); + } + + ret = reset_control_deassert(sdc->rstc); + if (ret) { + dev_err(&pdev->dev, "Couldn't deassert the device from reset\n"); + goto err_chan_free; + } + + ret = clk_prepare_enable(sdc->clk); + if (ret) { + dev_err(&pdev->dev, "Couldn't enable the clock\n"); + goto err_reset_assert; + } + + ret = devm_request_irq(&pdev->dev, sdc->irq, sun6i_dma_interrupt, 0, + dev_name(&pdev->dev), sdc); + if (ret) { + dev_err(&pdev->dev, "Cannot request IRQ\n"); + goto err_clk_disable; + } + + ret = dma_async_device_register(&sdc->slave); + if (ret) { + dev_warn(&pdev->dev, "Failed to register DMA engine device\n"); + goto err_irq_disable; + } + + ret = of_dma_controller_register(pdev->dev.of_node, sun6i_dma_of_xlate, + sdc); + if (ret) { + dev_err(&pdev->dev, "of_dma_controller_register failed\n"); + goto err_dma_unregister; + } + + return 0; + +err_dma_unregister: + dma_async_device_unregister(&sdc->slave); +err_irq_disable: + sun6i_kill_tasklet(sdc); +err_clk_disable: + clk_disable_unprepare(sdc->clk); +err_reset_assert: + reset_control_assert(sdc->rstc); +err_chan_free: + sun6i_dma_free(sdc); + return ret; +} + +static int sun6i_dma_remove(struct platform_device *pdev) +{ + struct sun6i_dma_dev *sdc = platform_get_drvdata(pdev); + + of_dma_controller_free(pdev->dev.of_node); + dma_async_device_unregister(&sdc->slave); + + sun6i_kill_tasklet(sdc); + + clk_disable_unprepare(sdc->clk); + reset_control_assert(sdc->rstc); + + sun6i_dma_free(sdc); + + return 0; +} + +static struct of_device_id sun6i_dma_match[] = { + { .compatible = "allwinner,sun6i-a31-dma" }, + { /* sentinel */ } +}; + +static struct platform_driver sun6i_dma_driver = { + .probe = sun6i_dma_probe, + .remove = sun6i_dma_remove, + .driver = { + .name = "sun6i-dma", + .of_match_table = sun6i_dma_match, + }, +}; +module_platform_driver(sun6i_dma_driver); + +MODULE_DESCRIPTION("Allwinner A31 DMA Controller Driver"); +MODULE_AUTHOR("Sugar <shuge@allwinnertech.com>"); +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index 03ad64ecaaf0..16efa603ff65 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -1055,7 +1055,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg( static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic( struct dma_chan *dc, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context) + unsigned long flags) { struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc); struct tegra_dma_desc *dma_desc = NULL; diff --git a/include/dt-bindings/dma/nbpfaxi.h b/include/dt-bindings/dma/nbpfaxi.h new file mode 100644 index 000000000000..c1a5b9e0d6a4 --- /dev/null +++ b/include/dt-bindings/dma/nbpfaxi.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd. + * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ + +#ifndef DT_BINDINGS_NBPFAXI_H +#define DT_BINDINGS_NBPFAXI_H + +/** + * Use "#dma-cells = <2>;" with the second integer defining slave DMA flags: + */ +#define NBPF_SLAVE_RQ_HIGH 1 +#define NBPF_SLAVE_RQ_LOW 2 +#define NBPF_SLAVE_RQ_LEVEL 4 + +#endif diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 3d1c2aa51530..1f9e642c66ad 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -37,7 +37,6 @@ */ typedef s32 dma_cookie_t; #define DMA_MIN_COOKIE 1 -#define DMA_MAX_COOKIE INT_MAX static inline int dma_submit_error(dma_cookie_t cookie) { @@ -671,7 +670,7 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_transfer_direction direction, - unsigned long flags, void *context); + unsigned long flags); struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( struct dma_chan *chan, struct dma_interleaved_template *xt, unsigned long flags); @@ -746,7 +745,7 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( unsigned long flags) { return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len, - period_len, dir, flags, NULL); + period_len, dir, flags); } static inline struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma( diff --git a/include/linux/of_dma.h b/include/linux/of_dma.h index ae36298ba076..56bc026c143f 100644 --- a/include/linux/of_dma.h +++ b/include/linux/of_dma.h @@ -41,6 +41,8 @@ extern struct dma_chan *of_dma_request_slave_channel(struct device_node *np, const char *name); extern struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec, struct of_dma *ofdma); +extern struct dma_chan *of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec, + struct of_dma *ofdma); #else static inline int of_dma_controller_register(struct device_node *np, struct dma_chan *(*of_dma_xlate) @@ -66,6 +68,8 @@ static inline struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_s return NULL; } +#define of_dma_xlate_by_chan_id NULL + #endif #endif /* __LINUX_OF_DMA_H */ diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index d05542aafa3e..6a1357d31871 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -40,6 +40,7 @@ enum sdma_peripheral_type { IMX_DMATYPE_ASRC, /* ASRC */ IMX_DMATYPE_ESAI, /* ESAI */ IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ + IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ }; enum imx_dma_prio { diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index eb8d5627d080..bdb2710e2aab 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -150,6 +150,8 @@ void edma_clear_event(unsigned channel); void edma_pause(unsigned channel); void edma_resume(unsigned channel); +void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no); + struct edma_rsv_info { const s16 (*rsv_chans)[2]; diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h index b7b43b82231e..56b97eed28a4 100644 --- a/include/linux/sh_dma.h +++ b/include/linux/sh_dma.h @@ -95,19 +95,21 @@ struct sh_dmae_pdata { }; /* DMAOR definitions */ -#define DMAOR_AE 0x00000004 +#define DMAOR_AE 0x00000004 /* Address Error Flag */ #define DMAOR_NMIF 0x00000002 -#define DMAOR_DME 0x00000001 +#define DMAOR_DME 0x00000001 /* DMA Master Enable */ /* Definitions for the SuperH DMAC */ -#define DM_INC 0x00004000 -#define DM_DEC 0x00008000 -#define DM_FIX 0x0000c000 -#define SM_INC 0x00001000 -#define SM_DEC 0x00002000 -#define SM_FIX 0x00003000 -#define CHCR_DE 0x00000001 -#define CHCR_TE 0x00000002 -#define CHCR_IE 0x00000004 +#define DM_INC 0x00004000 /* Destination addresses are incremented */ +#define DM_DEC 0x00008000 /* Destination addresses are decremented */ +#define DM_FIX 0x0000c000 /* Destination address is fixed */ +#define SM_INC 0x00001000 /* Source addresses are incremented */ +#define SM_DEC 0x00002000 /* Source addresses are decremented */ +#define SM_FIX 0x00003000 /* Source address is fixed */ +#define RS_AUTO 0x00000400 /* Auto Request */ +#define RS_ERS 0x00000800 /* DMA extended resource selector */ +#define CHCR_DE 0x00000001 /* DMA Enable */ +#define CHCR_TE 0x00000002 /* Transfer End Flag */ +#define CHCR_IE 0x00000004 /* Interrupt Enable */ #endif |