diff options
-rw-r--r-- | sound/isa/cmi8330.c | 86 |
1 files changed, 52 insertions, 34 deletions
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index 3ee0269e5bd0..02f79d252718 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -1,5 +1,5 @@ /* - * Driver for C-Media's CMI8330 soundcards. + * Driver for C-Media's CMI8330 and CMI8329 soundcards. * Copyright (c) by George Talusan <gstalusan@uwaterloo.ca> * http://www.undergrad.math.uwaterloo.ca/~gstalusa * @@ -35,7 +35,7 @@ * * This card has two mixers and two PCM devices. I've cheesed it such * that recording and playback can be done through the same device. - * The driver "magically" routes the capturing to the CMI8330 codec, + * The driver "magically" routes the capturing to the AD1848 codec, * and playback to the SB16 codec. This allows for full-duplex mode * to some extent. * The utilities in alsa-utils are aware of both devices, so passing @@ -64,7 +64,7 @@ /* */ MODULE_AUTHOR("George Talusan <gstalusan@uwaterloo.ca>"); -MODULE_DESCRIPTION("C-Media CMI8330"); +MODULE_DESCRIPTION("C-Media CMI8330/CMI8329"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{C-Media,CMI8330,isapnp:{CMI0001,@@@0001,@X@0001}}}"); @@ -86,38 +86,38 @@ static long mpuport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; static int mpuirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; module_param_array(index, int, NULL, 0444); -MODULE_PARM_DESC(index, "Index value for CMI8330 soundcard."); +MODULE_PARM_DESC(index, "Index value for CMI8330/CMI8329 soundcard."); module_param_array(id, charp, NULL, 0444); -MODULE_PARM_DESC(id, "ID string for CMI8330 soundcard."); +MODULE_PARM_DESC(id, "ID string for CMI8330/CMI8329 soundcard."); module_param_array(enable, bool, NULL, 0444); -MODULE_PARM_DESC(enable, "Enable CMI8330 soundcard."); +MODULE_PARM_DESC(enable, "Enable CMI8330/CMI8329 soundcard."); #ifdef CONFIG_PNP module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif module_param_array(sbport, long, NULL, 0444); -MODULE_PARM_DESC(sbport, "Port # for CMI8330 SB driver."); +MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver."); module_param_array(sbirq, int, NULL, 0444); -MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330 SB driver."); +MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver."); module_param_array(sbdma8, int, NULL, 0444); -MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330 SB driver."); +MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver."); module_param_array(sbdma16, int, NULL, 0444); -MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330 SB driver."); +MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver."); module_param_array(wssport, long, NULL, 0444); -MODULE_PARM_DESC(wssport, "Port # for CMI8330 WSS driver."); +MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver."); module_param_array(wssirq, int, NULL, 0444); -MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330 WSS driver."); +MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver."); module_param_array(wssdma, int, NULL, 0444); -MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver."); +MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver."); module_param_array(fmport, long, NULL, 0444); -MODULE_PARM_DESC(fmport, "FM port # for CMI8330 driver."); +MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver."); module_param_array(mpuport, long, NULL, 0444); -MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330 driver."); +MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver."); module_param_array(mpuirq, int, NULL, 0444); -MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330 MPU-401 port."); +MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port."); #ifdef CONFIG_PNP static int isa_registered; static int pnp_registered; @@ -156,6 +156,11 @@ static unsigned char snd_cmi8330_image[((CMI8330_CDINGAIN)-16) + 1] = typedef int (*snd_pcm_open_callback_t)(struct snd_pcm_substream *); +enum card_type { + CMI8330, + CMI8329 +}; + struct snd_cmi8330 { #ifdef CONFIG_PNP struct pnp_dev *cap; @@ -172,11 +177,14 @@ struct snd_cmi8330 { snd_pcm_open_callback_t open; void *private_data; /* sb or wss */ } streams[2]; + + enum card_type type; }; #ifdef CONFIG_PNP static struct pnp_card_device_id snd_cmi8330_pnpids[] = { + { .id = "CMI0001", .devs = { { "@X@0001" }, { "@@@0001" }, { "@H@0001" }, { "A@@0001" } } }, { .id = "CMI0001", .devs = { { "@@@0001" }, { "@X@0001" }, { "@H@0001" } } }, { .id = "" } }; @@ -304,7 +312,7 @@ static int __devinit snd_cmi8330_mixer(struct snd_card *card, struct snd_cmi8330 unsigned int idx; int err; - strcpy(card->mixername, "CMI8330/C3D"); + strcpy(card->mixername, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D"); for (idx = 0; idx < ARRAY_SIZE(snd_cmi8330_controls); idx++) { err = snd_ctl_add(card, @@ -329,6 +337,9 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard, struct pnp_dev *pdev; int err; + /* CMI8329 has a device with ID A@@0001, CMI8330 does not */ + acard->type = (id->devs[3].id[0]) ? CMI8329 : CMI8330; + acard->cap = pnp_request_card_device(card, id->devs[0].id, NULL); if (acard->cap == NULL) return -EBUSY; @@ -345,38 +356,45 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard, err = pnp_activate_dev(pdev); if (err < 0) { - snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n"); + snd_printk(KERN_ERR "AD1848 PnP configure failure\n"); return -EBUSY; } wssport[dev] = pnp_port_start(pdev, 0); wssdma[dev] = pnp_dma(pdev, 0); wssirq[dev] = pnp_irq(pdev, 0); - fmport[dev] = pnp_port_start(pdev, 1); + if (pnp_port_start(pdev, 1)) + fmport[dev] = pnp_port_start(pdev, 1); /* allocate SB16 resources */ pdev = acard->play; err = pnp_activate_dev(pdev); if (err < 0) { - snd_printk(KERN_ERR "CMI8330/C3D (SB16) PnP configure failure\n"); + snd_printk(KERN_ERR "SB16 PnP configure failure\n"); return -EBUSY; } sbport[dev] = pnp_port_start(pdev, 0); sbdma8[dev] = pnp_dma(pdev, 0); sbdma16[dev] = pnp_dma(pdev, 1); sbirq[dev] = pnp_irq(pdev, 0); + /* On CMI8239, the OPL3 port might be present in SB16 PnP resources */ + if (fmport[dev] == SNDRV_AUTO_PORT) { + if (pnp_port_start(pdev, 1)) + fmport[dev] = pnp_port_start(pdev, 1); + else + fmport[dev] = 0x388; /* Or hardwired */ + } /* allocate MPU-401 resources */ pdev = acard->mpu; err = pnp_activate_dev(pdev); - if (err < 0) { - snd_printk(KERN_ERR - "CMI8330/C3D (MPU-401) PnP configure failure\n"); - return -EBUSY; + if (err < 0) + snd_printk(KERN_ERR "MPU-401 PnP configure failure: will be disabled\n"); + else { + mpuport[dev] = pnp_port_start(pdev, 0); + mpuirq[dev] = pnp_irq(pdev, 0); } - mpuport[dev] = pnp_port_start(pdev, 0); - mpuirq[dev] = pnp_irq(pdev, 0); return 0; } #endif @@ -430,9 +448,9 @@ static int __devinit snd_cmi8330_pcm(struct snd_card *card, struct snd_cmi8330 * snd_cmi8330_capture_open }; - if ((err = snd_pcm_new(card, "CMI8330", 0, 1, 1, &pcm)) < 0) + if ((err = snd_pcm_new(card, (chip->type == CMI8329) ? "CMI8329" : "CMI8330", 0, 1, 1, &pcm)) < 0) return err; - strcpy(pcm->name, "CMI8330"); + strcpy(pcm->name, (chip->type == CMI8329) ? "CMI8329" : "CMI8330"); pcm->private_data = chip; /* SB16 */ @@ -527,11 +545,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) wssdma[dev], -1, WSS_HW_DETECT, 0, &acard->wss); if (err < 0) { - snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n"); + snd_printk(KERN_ERR PFX "AD1848 device busy??\n"); return err; } if (acard->wss->hardware != WSS_HW_CMI8330) { - snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n"); + snd_printk(KERN_ERR PFX "AD1848 not found during probe\n"); return -ENODEV; } @@ -541,11 +559,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) sbdma8[dev], sbdma16[dev], SB_HW_AUTO, &acard->sb)) < 0) { - snd_printk(KERN_ERR PFX "(SB16) device busy??\n"); + snd_printk(KERN_ERR PFX "SB16 device busy??\n"); return err; } if (acard->sb->hardware != SB_HW_16) { - snd_printk(KERN_ERR PFX "(SB16) not found during probe\n"); + snd_printk(KERN_ERR PFX "SB16 not found during probe\n"); return err; } @@ -585,8 +603,8 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev) mpuport[dev]); } - strcpy(card->driver, "CMI8330/C3D"); - strcpy(card->shortname, "C-Media CMI8330/C3D"); + strcpy(card->driver, (acard->type == CMI8329) ? "CMI8329" : "CMI8330/C3D"); + strcpy(card->shortname, (acard->type == CMI8329) ? "C-Media CMI8329" : "C-Media CMI8330/C3D"); sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d", card->shortname, acard->wss->port, |