diff options
| -rw-r--r-- | drivers/hwmon/w83792d.c | 214 |
1 files changed, 72 insertions, 142 deletions
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 299629d47ed6..cf94c5b0c879 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -267,9 +267,7 @@ DIV_TO_REG(long val) } struct w83792d_data { - struct i2c_client client; struct device *hwmon_dev; - enum chips type; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -299,9 +297,11 @@ struct w83792d_data { u8 sf2_levels[3][4]; /* Smart FanII: Fan1,2,3 duty cycle levels */ }; -static int w83792d_attach_adapter(struct i2c_adapter *adapter); -static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83792d_detach_client(struct i2c_client *client); +static int w83792d_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83792d_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83792d_remove(struct i2c_client *client); static struct w83792d_data *w83792d_update_device(struct device *dev); #ifdef DEBUG @@ -310,12 +310,22 @@ static void w83792d_print_debug(struct w83792d_data *data, struct device *dev); static void w83792d_init_client(struct i2c_client *client); +static const struct i2c_device_id w83792d_id[] = { + { "w83792d", w83792d }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83792d_id); + static struct i2c_driver w83792d_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83792d", }, - .attach_adapter = w83792d_attach_adapter, - .detach_client = w83792d_detach_client, + .probe = w83792d_probe, + .remove = w83792d_remove, + .id_table = w83792d_id, + .detect = w83792d_detect, + .address_data = &addr_data, }; static inline long in_count_from_reg(int nr, struct w83792d_data *data) @@ -864,53 +874,14 @@ store_sf2_level(struct device *dev, struct device_attribute *attr, return count; } -/* This function is called when: - * w83792d_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and w83792d_driver is still present) */ -static int -w83792d_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83792d_detect); -} - - -static int -w83792d_create_subclient(struct i2c_adapter *adapter, - struct i2c_client *new_client, int addr, - struct i2c_client **sub_cli) -{ - int err; - struct i2c_client *sub_client; - - (*sub_cli) = sub_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(sub_client)) { - return -ENOMEM; - } - sub_client->addr = 0x48 + addr; - i2c_set_clientdata(sub_client, NULL); - sub_client->adapter = adapter; - sub_client->driver = &w83792d_driver; - sub_client->flags = 0; - strlcpy(sub_client->name, "w83792d subclient", I2C_NAME_SIZE); - if ((err = i2c_attach_client(sub_client))) { - dev_err(&new_client->dev, "subclient registration " - "at address 0x%x failed\n", sub_client->addr); - kfree(sub_client); - return err; - } - return 0; -} - static int -w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, - struct i2c_client *new_client) +w83792d_detect_subclients(struct i2c_client *new_client) { int i, id, err; + int address = new_client->addr; u8 val; + struct i2c_adapter *adapter = new_client->adapter; struct w83792d_data *data = i2c_get_clientdata(new_client); id = i2c_adapter_id(adapter); @@ -932,10 +903,7 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR); if (!(val & 0x08)) { - err = w83792d_create_subclient(adapter, new_client, val & 0x7, - &data->lm75[0]); - if (err < 0) - goto ERROR_SC_0; + data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); } if (!(val & 0x80)) { if ((data->lm75[0] != NULL) && @@ -945,10 +913,8 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, err = -ENODEV; goto ERROR_SC_1; } - err = w83792d_create_subclient(adapter, new_client, - (val >> 4) & 0x7, &data->lm75[1]); - if (err < 0) - goto ERROR_SC_1; + data->lm75[1] = i2c_new_dummy(adapter, + 0x48 + ((val >> 4) & 0x7)); } return 0; @@ -956,10 +922,8 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, /* Undo inits in case of errors */ ERROR_SC_1: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); ERROR_SC_0: return err; } @@ -1294,47 +1258,25 @@ static const struct attribute_group w83792d_group = { .attrs = w83792d_attributes, }; +/* Return 0 if detection is successful, -ENODEV otherwise */ static int -w83792d_detect(struct i2c_adapter *adapter, int address, int kind) +w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { - int i = 0, val1 = 0, val2; - struct i2c_client *client; - struct device *dev; - struct w83792d_data *data; - int err = 0; - const char *client_name = ""; + struct i2c_adapter *adapter = client->adapter; + int val1, val2; + unsigned short address = client->addr; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto ERROR0; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83792d_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR0; + return -ENODEV; } - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83792d_driver; - client->flags = 0; - - /* Now, we do the remaining detection. */ - /* The w83792d may be stuck in some other bank than bank 0. This may make reading other information impossible. Specify a force=... or force_*=... parameter, and the Winbond will be reset to the right bank. */ if (kind < 0) { if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) { - dev_dbg(dev, "Detection failed at step 1\n"); - goto ERROR1; + return -ENODEV; } val1 = w83792d_read_value(client, W83792D_REG_BANK); val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); @@ -1342,16 +1284,14 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) if (!(val1 & 0x07)) { /* is Bank0 */ if (((!(val1 & 0x80)) && (val2 != 0xa3)) || ((val1 & 0x80) && (val2 != 0x5c))) { - dev_dbg(dev, "Detection failed at step 2\n"); - goto ERROR1; + return -ENODEV; } } /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR should match */ if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address) { - dev_dbg(dev, "Detection failed at step 3\n"); - goto ERROR1; + return -ENODEV; } } @@ -1367,45 +1307,48 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) /* get vendor ID */ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); if (val2 != 0x5c) { /* the vendor is NOT Winbond */ - goto ERROR1; + return -ENODEV; } val1 = w83792d_read_value(client, W83792D_REG_WCHIPID); if (val1 == 0x7a) { kind = w83792d; } else { if (kind == 0) - dev_warn(dev, + dev_warn(&adapter->dev, "w83792d: Ignoring 'force' parameter for" " unknown chip at adapter %d, address" " 0x%02x\n", i2c_adapter_id(adapter), address); - goto ERROR1; + return -ENODEV; } } - if (kind == w83792d) { - client_name = "w83792d"; - } else { - dev_err(dev, "w83792d: Internal error: unknown kind (%d)?!?\n", - kind); - goto ERROR1; - } + strlcpy(info->type, "w83792d", I2C_NAME_SIZE); + + return 0; +} + +static int +w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct w83792d_data *data; + struct device *dev = &client->dev; + int i, val1, err; - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, client_name, I2C_NAME_SIZE); - data->type = kind; + data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto ERROR0; + } + i2c_set_clientdata(client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) + err = w83792d_detect_subclients(client); + if (err) goto ERROR1; - if ((err = w83792d_detect_subclients(adapter, address, - kind, client))) - goto ERROR2; - /* Initialize the chip */ w83792d_init_client(client); @@ -1457,16 +1400,10 @@ exit_remove_files: for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]); ERROR3: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } - if (data->lm75[1] != NULL) { - i2c_detach_client(data->lm75[1]); - kfree(data->lm75[1]); - } -ERROR2: - i2c_detach_client(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); ERROR1: kfree(data); ERROR0: @@ -1474,30 +1411,23 @@ ERROR0: } static int -w83792d_detach_client(struct i2c_client *client) +w83792d_remove(struct i2c_client *client) { struct w83792d_data *data = i2c_get_clientdata(client); - int err, i; - - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &w83792d_group); - for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) - sysfs_remove_group(&client->dev.kobj, - &w83792d_group_fan[i]); - } + int i; - if ((err = i2c_detach_client(client))) - return err; + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &w83792d_group); + for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) + sysfs_remove_group(&client->dev.kobj, + &w83792d_group_fan[i]); - /* main client */ - if (data) - kfree(data); - /* subclient */ - else - kfree(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); + kfree(data); return 0; } |