diff options
43 files changed, 1417 insertions, 563 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index e091fa873792..bc578bc60628 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -349,3 +349,24 @@ Description: This will be one of the same strings reported by the "state" attribute. + +What: /sys/class/regulator/.../bypass +Date: September 2012 +KernelVersion: 3.7 +Contact: Mark Brown <broonie@opensource.wolfsonmicro.com> +Description: + Some regulator directories will contain a field called + bypass. This indicates if the device is in bypass mode. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'unknown' + + 'enabled' means the regulator is in bypass mode. + + 'disabled' means that the regulator is regulating. + + 'unknown' means software cannot determine the state, or + the reported state is invalid. diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 66ece3f87bbc..ecfc6ccd67ef 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -11,10 +11,13 @@ Optional properties: - regulator-boot-on: bootloader/firmware enabled regulator - <name>-supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) + +Deprecated properties: - regulator-compatible: If a regulator chip contains multiple regulators, and if the chip's binding contains a child node that describes each regulator, then this property indicates which regulator - this child node is intended to configure. + this child node is intended to configure. If this property is missing, + the node's name will be used instead. Example: diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt index 0487e9675ba0..d316fb895daf 100644 --- a/Documentation/devicetree/bindings/regulator/tps65217.txt +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -22,66 +22,49 @@ Example: compatible = "ti,tps65217"; regulators { - #address-cells = <1>; - #size-cells = <0>; - - dcdc1_reg: regulator@0 { - reg = <0>; - regulator-compatible = "dcdc1"; + dcdc1_reg: dcdc1 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; - dcdc2_reg: regulator@1 { - reg = <1>; - regulator-compatible = "dcdc2"; + dcdc2_reg: dcdc2 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - dcdc3_reg: regulator@2 { - reg = <2>; - regulator-compatible = "dcdc3"; + dcdc3_reg: dcc3 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - ldo1_reg: regulator@3 { - reg = <3>; - regulator-compatible = "ldo1"; + ldo1_reg: ldo1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo2_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo2"; + ldo2_reg: ldo2 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo3_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo3"; + ldo3_reg: ldo3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo4_reg: regulator@6 { - reg = <6>; - regulator-compatible = "ldo4"; + ldo4_reg: ldo4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index da80c2ae0915..07b9ef6e49d5 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -6,9 +6,13 @@ Required properties: - interrupts: the interrupt outputs of the controller - #gpio-cells: number of cells to describe a GPIO - gpio-controller: mark the device as a GPIO controller -- regulators: list of regulators provided by this controller, must have - property "regulator-compatible" to match their hardware counterparts: - sm[0-2], ldo[0-9] and ldo_rtc +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + sys, sm[0-2], ldo[0-9] and ldo_rtc +- sys-supply: The input supply for SYS. - vin-sm0-supply: The input supply for the SM0. - vin-sm1-supply: The input supply for the SM1. - vin-sm2-supply: The input supply for the SM2. @@ -20,6 +24,9 @@ Required properties: Each regulator is defined using the standard binding for regulators. +Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver + take care of making proper parent child relationship. + Example: pmu: tps6586x@34 { @@ -30,6 +37,7 @@ Example: #gpio-cells = <2>; gpio-controller; + sys-supply = <&some_reg>; vin-sm0-supply = <&some_reg>; vin-sm1-supply = <&some_reg>; vin-sm2-supply = <&some_reg>; @@ -40,103 +48,80 @@ Example: vinldo9-supply = <...>; regulators { - #address-cells = <1>; - #size-cells = <0>; + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-boot-on; + regulator-always-on; + }; - sm0_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sm0"; + sm0_reg: sm0 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm1_reg: regulator@1 { - reg = <1>; - regulator-compatible = "sm1"; + sm1_reg: sm1 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm2_reg: regulator@2 { - reg = <2>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <4550000>; regulator-boot-on; regulator-always-on; }; - ldo0_reg: regulator@3 { - reg = <3>; - regulator-compatible = "ldo0"; + ldo0_reg: ldo0 { regulator-name = "PCIE CLK"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo1_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo1"; + ldo1_reg: ldo1 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo2_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo2"; + ldo2_reg: ldo2 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo3_reg: regulator@6 { - reg = <6>; - regulator-compatible = "ldo3"; + ldo3_reg: ldo3 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo4_reg: regulator@7 { - reg = <7>; - regulator-compatible = "ldo4"; + ldo4_reg: ldo4 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2475000>; }; - ldo5_reg: regulator@8 { - reg = <8>; - regulator-compatible = "ldo5"; + ldo5_reg: ldo5 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo6_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo6"; + ldo6_reg: ldo6 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo7_reg: regulator@10 { - reg = <10>; - regulator-compatible = "ldo7"; + ldo7_reg: ldo7 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo8_reg: regulator@11 { - reg = <11>; - regulator-compatible = "ldo8"; + ldo8_reg: ldo8 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo9_reg: regulator@12 { - reg = <12>; - regulator-compatible = "ldo9"; + ldo9_reg: ldo9 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index b7344beec102..94486e7e9dfd 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -67,6 +67,13 @@ static struct regulator_init_data ldo0_data = { }, \ } +static struct regulator_init_data sys_data = { + .supply_regulator = "vdd_5v0", + .constraints = { + .name = "vdd_sys", + }, +}; + HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); @@ -74,7 +81,7 @@ HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", "vdd_sys", 1250, 3300, 1); HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); @@ -88,6 +95,7 @@ HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); } static struct tps6586x_subdev_info tps_devs[] = { + TPS_REG(SYS, &sys_data), TPS_REG(SM_0, &sm0_data), TPS_REG(SM_1, &sm1_data), TPS_REG(SM_2, &sm2_data), @@ -120,7 +128,7 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { - regulator_register_always_on(0, "vdd_sys", + regulator_register_always_on(0, "vdd_5v0", NULL, 0, 5000000); if (machine_is_harmony()) { diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 427a289f32a5..6c19833ed2d0 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -434,6 +434,11 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev) regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, ARIZONA_JD1_ENA, ARIZONA_JD1_ENA); + ret = regulator_allow_bypass(info->micvdd, true); + if (ret != 0) + dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n", + ret); + pm_runtime_put(&pdev->dev); return 0; diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index 5f58370ccf55..345960ca2fd8 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -25,6 +25,7 @@ #include <linux/i2c.h> #include <linux/regmap.h> #include <linux/regulator/of_regulator.h> +#include <linux/regulator/machine.h> #include <linux/mfd/core.h> #include <linux/mfd/tps6586x.h> @@ -346,6 +347,7 @@ failed: #ifdef CONFIG_OF static struct of_regulator_match tps6586x_matches[] = { + { .name = "sys", .driver_data = (void *)TPS6586X_ID_SYS }, { .name = "sm0", .driver_data = (void *)TPS6586X_ID_SM_0 }, { .name = "sm1", .driver_data = (void *)TPS6586X_ID_SM_1 }, { .name = "sm2", .driver_data = (void *)TPS6586X_ID_SM_2 }, @@ -369,6 +371,7 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien struct tps6586x_platform_data *pdata; struct tps6586x_subdev_info *devs; struct device_node *regs; + const char *sys_rail_name = NULL; unsigned int count; unsigned int i, j; int err; @@ -391,12 +394,22 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien return NULL; for (i = 0, j = 0; i < num && j < count; i++) { + struct regulator_init_data *reg_idata; + if (!tps6586x_matches[i].init_data) continue; + reg_idata = tps6586x_matches[i].init_data; devs[j].name = "tps6586x-regulator"; devs[j].platform_data = tps6586x_matches[i].init_data; devs[j].id = (int)tps6586x_matches[i].driver_data; + if (devs[j].id == TPS6586X_ID_SYS) + sys_rail_name = reg_idata->constraints.name; + + if ((devs[j].id == TPS6586X_ID_LDO_5) || + (devs[j].id == TPS6586X_ID_LDO_RTC)) + reg_idata->supply_regulator = sys_rail_name; + devs[j].of_node = tps6586x_matches[i].of_node; j++; } diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 4e932cc695e9..e98a5e7827df 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -33,9 +33,8 @@ config REGULATOR_DUMMY help If this option is enabled then when a regulator lookup fails and the board has not specified that it has provided full - constraints then the regulator core will provide an always - enabled dummy regulator will be provided, allowing consumer - drivers to continue. + constraints the regulator core will provide an always + enabled dummy regulator, allowing consumer drivers to continue. A warning will be generated when this substitution is done. @@ -50,11 +49,11 @@ config REGULATOR_VIRTUAL_CONSUMER tristate "Virtual regulator consumer support" help This driver provides a virtual consumer for the voltage and - current regulator API which provides sysfs controls for - configuring the supplies requested. This is mainly useful - for test purposes. + current regulator API which provides sysfs controls for + configuring the supplies requested. This is mainly useful + for test purposes. - If unsure, say no. + If unsure, say no. config REGULATOR_USERSPACE_CONSUMER tristate "Userspace regulator consumer support" @@ -63,7 +62,7 @@ config REGULATOR_USERSPACE_CONSUMER from user space. Userspace consumer driver provides ability to control power supplies for such devices. - If unsure, say no. + If unsure, say no. config REGULATOR_GPIO tristate "GPIO regulator support" @@ -110,6 +109,17 @@ config REGULATOR_DA9052 This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. +config REGULATOR_FAN53555 + tristate "Fairchild FAN53555 Regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports Fairchild FAN53555 Digitally Programmable + TinyBuck Regulator. The FAN53555 is a step-down switching voltage + regulator that delivers a digitally programmable output from an + input voltage supply of 2.5V to 5.5V. The output voltage is + programmed through an I2C interface. + config REGULATOR_ANATOP tristate "Freescale i.MX on-chip ANATOP LDO regulators" depends on MFD_ANATOP @@ -172,6 +182,14 @@ config REGULATOR_MAX8660 This driver controls a Maxim 8660/8661 voltage output regulator via I2C bus. +config REGULATOR_MAX8907 + tristate "Maxim 8907 voltage regulator" + depends on MFD_MAX8907 + help + This driver controls a Maxim 8907 voltage output regulator + via I2C bus. The provided regulator is suitable for Tegra + chip to control Step-Down DC-DC and LDOs. + config REGULATOR_MAX8925 tristate "Maxim MAX8925 Power Management IC" depends on MFD_MAX8925 @@ -247,7 +265,7 @@ config REGULATOR_LP8788 config REGULATOR_PCF50633 tristate "NXP PCF50633 regulator driver" - depends on MFD_PCF50633 + depends on MFD_PCF50633 help Say Y here to support the voltage regulators and convertors on PCF50633 @@ -416,7 +434,7 @@ config REGULATOR_WM8350 depends on MFD_WM8350 help This driver provides support for the voltage and current regulators - of the WM8350 AudioPlus PMIC. + of the WM8350 AudioPlus PMIC. config REGULATOR_WM8400 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 3342615cf25e..e431eed8a878 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o +obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o @@ -30,6 +31,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o +obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c index 6f45bfd22e83..167c93f21981 100644 --- a/drivers/regulator/aat2870-regulator.c +++ b/drivers/regulator/aat2870-regulator.c @@ -162,7 +162,7 @@ static struct aat2870_regulator *aat2870_get_regulator(int id) static int aat2870_regulator_probe(struct platform_device *pdev) { struct aat2870_regulator *ri; - struct regulator_config config = { 0 }; + struct regulator_config config = { }; struct regulator_dev *rdev; ri = aat2870_get_regulator(pdev->id); diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c index c151fd5d8c97..65ad2b36ce36 100644 --- a/drivers/regulator/ab3100.c +++ b/drivers/regulator/ab3100.c @@ -347,17 +347,11 @@ static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg) return abreg->plfdata->external_voltage; } -static int ab3100_get_fixed_voltage_regulator(struct regulator_dev *reg) -{ - return reg->desc->min_uV; -} - static struct regulator_ops regulator_ops_fixed = { .list_voltage = regulator_list_voltage_linear, .enable = ab3100_enable_regulator, .disable = ab3100_disable_regulator, .is_enabled = ab3100_is_enabled_regulator, - .get_voltage = ab3100_get_fixed_voltage_regulator, }; static struct regulator_ops regulator_ops_variable = { diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 10f2f4d4d190..e3d1d063025a 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -37,6 +37,7 @@ * @voltage_bank: bank to control regulator voltage * @voltage_reg: register to control regulator voltage * @voltage_mask: mask to control regulator voltage + * @voltage_shift: shift to control regulator voltage * @delay: startup/set voltage delay in us */ struct ab8500_regulator_info { @@ -50,6 +51,7 @@ struct ab8500_regulator_info { u8 voltage_bank; u8 voltage_reg; u8 voltage_mask; + u8 voltage_shift; unsigned int delay; }; @@ -195,17 +197,14 @@ static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev) } dev_vdbg(rdev_get_dev(rdev), - "%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x," - " 0x%x\n", - info->desc.name, info->voltage_bank, info->voltage_reg, - info->voltage_mask, regval); + "%s-get_voltage (bank, reg, mask, shift, value): " + "0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", + info->desc.name, info->voltage_bank, + info->voltage_reg, info->voltage_mask, + info->voltage_shift, regval); - /* vintcore has a different layout */ val = regval & info->voltage_mask; - if (info->desc.id == AB8500_LDO_INTCORE) - return val >> 0x3; - else - return val; + return val >> info->voltage_shift; } static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev, @@ -221,7 +220,7 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev, } /* set the registers for the request */ - regval = (u8)selector; + regval = (u8)selector << info->voltage_shift; ret = abx500_mask_and_set_register_interruptible(info->dev, info->voltage_bank, info->voltage_reg, info->voltage_mask, regval); @@ -238,13 +237,6 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev, return ret; } -static int ab8500_regulator_enable_time(struct regulator_dev *rdev) -{ - struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); - - return info->delay; -} - static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int old_sel, unsigned int new_sel) @@ -261,22 +253,14 @@ static struct regulator_ops ab8500_regulator_ops = { .get_voltage_sel = ab8500_regulator_get_voltage_sel, .set_voltage_sel = ab8500_regulator_set_voltage_sel, .list_voltage = regulator_list_voltage_table, - .enable_time = ab8500_regulator_enable_time, .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel, }; -static int ab8500_fixed_get_voltage(struct regulator_dev *rdev) -{ - return rdev->desc->min_uV; -} - static struct regulator_ops ab8500_regulator_fixed_ops = { .enable = ab8500_regulator_enable, .disable = ab8500_regulator_disable, .is_enabled = ab8500_regulator_is_enabled, - .get_voltage = ab8500_fixed_get_voltage, .list_voltage = regulator_list_voltage_linear, - .enable_time = ab8500_regulator_enable_time, }; static struct ab8500_regulator_info @@ -358,6 +342,7 @@ static struct ab8500_regulator_info .voltage_bank = 0x03, .voltage_reg = 0x80, .voltage_mask = 0x38, + .voltage_shift = 3, }, /* @@ -374,6 +359,7 @@ static struct ab8500_regulator_info .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 2000000, + .enable_time = 10000, }, .delay = 10000, .update_bank = 0x03, diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c index c8f95c07adb6..d184aa35abcb 100644 --- a/drivers/regulator/arizona-ldo1.c +++ b/drivers/regulator/arizona-ldo1.c @@ -39,6 +39,8 @@ static struct regulator_ops arizona_ldo1_ops = { .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, }; static const struct regulator_desc arizona_ldo1 = { @@ -49,9 +51,11 @@ static const struct regulator_desc arizona_ldo1 = { .vsel_reg = ARIZONA_LDO1_CONTROL_1, .vsel_mask = ARIZONA_LDO1_VSEL_MASK, + .bypass_reg = ARIZONA_LDO1_CONTROL_1, + .bypass_mask = ARIZONA_LDO1_BYPASS, .min_uV = 900000, .uV_step = 50000, - .n_voltages = 7, + .n_voltages = 6, .owner = THIS_MODULE, }; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index 450a069aa9b6..d9b1f82cc5bd 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -82,6 +82,9 @@ static struct regulator_ops arizona_micsupp_ops = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, + + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, }; static const struct regulator_desc arizona_micsupp = { @@ -95,6 +98,8 @@ static const struct regulator_desc arizona_micsupp = { .vsel_mask = ARIZONA_LDO2_VSEL_MASK, .enable_reg = ARIZONA_MIC_CHARGE_PUMP_1, .enable_mask = ARIZONA_CPMIC_ENA, + .bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1, + .bypass_mask = ARIZONA_CPMIC_BYPASS, .owner = THIS_MODULE, }; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 48385318175a..2e0352dc26bd 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -77,6 +77,7 @@ struct regulator { struct device *dev; struct list_head list; unsigned int always_on:1; + unsigned int bypass:1; int uA_load; int min_uV; int max_uV; @@ -394,6 +395,9 @@ static ssize_t regulator_status_show(struct device *dev, case REGULATOR_STATUS_STANDBY: label = "standby"; break; + case REGULATOR_STATUS_BYPASS: + label = "bypass"; + break; case REGULATOR_STATUS_UNDEFINED: label = "undefined"; break; @@ -585,6 +589,27 @@ static ssize_t regulator_suspend_standby_state_show(struct device *dev, static DEVICE_ATTR(suspend_standby_state, 0444, regulator_suspend_standby_state_show, NULL); +static ssize_t regulator_bypass_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + const char *report; + bool bypass; + int ret; + + ret = rdev->desc->ops->get_bypass(rdev, &bypass); + + if (ret != 0) + report = "unknown"; + else if (bypass) + report = "enabled"; + else + report = "disabled"; + + return sprintf(buf, "%s\n", report); +} +static DEVICE_ATTR(bypass, 0444, + regulator_bypass_show, NULL); /* * These are the only attributes are present for all regulators. @@ -778,6 +803,9 @@ static void print_constraints(struct regulator_dev *rdev) if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) count += sprintf(buf + count, "standby"); + if (!count) + sprintf(buf, "no parameters"); + rdev_info(rdev, "%s\n", buf); if ((constraints->min_uV != constraints->max_uV) && @@ -974,6 +1002,7 @@ static int set_supply(struct regulator_dev *rdev, err = -ENOMEM; return err; } + supply_rdev->open_count++; return 0; } @@ -1720,6 +1749,9 @@ int regulator_disable_deferred(struct regulator *regulator, int ms) if (regulator->always_on) return 0; + if (!ms) + return regulator_disable(regulator); + mutex_lock(&rdev->mutex); rdev->deferred_disables++; mutex_unlock(&rdev->mutex); @@ -2178,9 +2210,12 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, } } - if (ret == 0 && best_val >= 0) + if (ret == 0 && best_val >= 0) { + unsigned long data = best_val; + _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, - (void *)best_val); + (void *)data); + } trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val); @@ -2291,8 +2326,8 @@ int regulator_set_voltage_time(struct regulator *regulator, EXPORT_SYMBOL_GPL(regulator_set_voltage_time); /** - *regulator_set_voltage_time_sel - get raise/fall time - * @regulator: regulator source + * regulator_set_voltage_time_sel - get raise/fall time + * @rdev: regulator source device * @old_selector: selector for starting voltage * @new_selector: selector for target voltage * @@ -2388,6 +2423,8 @@ static int _regulator_get_voltage(struct regulator_dev *rdev) ret = rdev->desc->ops->list_voltage(rdev, sel); } else if (rdev->desc->ops->get_voltage) { ret = rdev->desc->ops->get_voltage(rdev); + } else if (rdev->desc->ops->list_voltage) { + ret = rdev->desc->ops->list_voltage(rdev, 0); } else { return -EINVAL; } @@ -2674,6 +2711,100 @@ out: EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); /** + * regulator_set_bypass_regmap - Default set_bypass() using regmap + * + * @rdev: device to operate on. + * @enable: state to set. + */ +int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable) +{ + unsigned int val; + + if (enable) + val = rdev->desc->bypass_mask; + else + val = 0; + + return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg, + rdev->desc->bypass_mask, val); +} +EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap); + +/** + * regulator_get_bypass_regmap - Default get_bypass() using regmap + * + * @rdev: device to operate on. + * @enable: current state. + */ +int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable) +{ + unsigned int val; + int ret; + + ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val); + if (ret != 0) + return ret; + + *enable = val & rdev->desc->bypass_mask; + + return 0; +} +EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap); + +/** + * regulator_allow_bypass - allow the regulator to go into bypass mode + * + * @regulator: Regulator to configure + * @allow: enable or disable bypass mode + * + * Allow the regulator to go into bypass mode if all other consumers + * for the regulator also enable bypass mode and the machine + * constraints allow this. Bypass mode means that the regulator is + * simply passing the input directly to the output with no regulation. + */ +int regulator_allow_bypass(struct regulator *regulator, bool enable) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret = 0; + + if (!rdev->desc->ops->set_bypass) + return 0; + + if (rdev->constraints && + !(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_BYPASS)) + return 0; + + mutex_lock(&rdev->mutex); + + if (enable && !regulator->bypass) { + rdev->bypass_count++; + + if (rdev->bypass_count == rdev->open_count) { + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count--; + } + + } else if (!enable && regulator->bypass) { + rdev->bypass_count--; + + if (rdev->bypass_count != rdev->open_count) { + ret = rdev->desc->ops->set_bypass(rdev, enable); + if (ret != 0) + rdev->bypass_count++; + } + } + + if (ret == 0) + regulator->bypass = enable; + + mutex_unlock(&rdev->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_allow_bypass); + +/** * regulator_register_notifier - register regulator event notifier * @regulator: regulator source * @nb: notifier block @@ -3011,7 +3142,8 @@ static int add_regulator_attributes(struct regulator_dev *rdev) /* some attributes need specific methods to be displayed */ if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || - (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0)) { + (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || + (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0)) { status = device_create_file(dev, &dev_attr_microvolts); if (status < 0) return status; @@ -3036,6 +3168,11 @@ static int add_regulator_attributes(struct regulator_dev *rdev) if (status < 0) return status; } + if (ops->get_bypass) { + status = device_create_file(dev, &dev_attr_bypass); + if (status < 0) + return status; + } /* some attributes are type-specific */ if (rdev->desc->type == REGULATOR_CURRENT) { @@ -3124,6 +3261,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev) &rdev->use_count); debugfs_create_u32("open_count", 0444, rdev->debugfs, &rdev->open_count); + debugfs_create_u32("bypass_count", 0444, rdev->debugfs, + &rdev->bypass_count); } /** @@ -3189,8 +3328,10 @@ regulator_register(const struct regulator_desc *regulator_desc, rdev->desc = regulator_desc; if (config->regmap) rdev->regmap = config->regmap; - else + else if (dev_get_regmap(dev, NULL)) rdev->regmap = dev_get_regmap(dev, NULL); + else if (dev->parent) + rdev->regmap = dev_get_regmap(dev->parent, NULL); INIT_LIST_HEAD(&rdev->consumer_list); INIT_LIST_HEAD(&rdev->list); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 903299cf15cf..27355b1199e5 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -133,8 +133,8 @@ static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA, max_uA < da9052_current_limits[row][DA9052_MIN_UA]) return -EINVAL; - for (i = 0; i < DA9052_CURRENT_RANGE; i++) { - if (min_uA <= da9052_current_limits[row][i]) { + for (i = DA9052_CURRENT_RANGE - 1; i >= 0; i--) { + if (da9052_current_limits[row][i] <= max_uA) { reg_val = i; break; } diff --git a/drivers/regulator/dummy.c b/drivers/regulator/dummy.c index 86f655c7f7a1..03a1d7c11ef2 100644 --- a/drivers/regulator/dummy.c +++ b/drivers/regulator/dummy.c @@ -30,7 +30,7 @@ static struct regulator_init_data dummy_initdata; static struct regulator_ops dummy_ops; static struct regulator_desc dummy_desc = { - .name = "dummy", + .name = "regulator-dummy", .id = -1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c new file mode 100644 index 000000000000..339f4d732e97 --- /dev/null +++ b/drivers/regulator/fan53555.c @@ -0,0 +1,322 @@ +/* + * FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver. + * + * Supported Part Numbers: + * FAN53555UC00X/01X/03X/04X/05X + * + * Copyright (c) 2012 Marvell Technology Ltd. + * Yunfan Zhang <yfzhang@marvell.com> + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <linux/param.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/regulator/fan53555.h> + +/* Voltage setting */ +#define FAN53555_VSEL0 0x00 +#define FAN53555_VSEL1 0x01 +/* Control register */ +#define FAN53555_CONTROL 0x02 +/* IC Type */ +#define FAN53555_ID1 0x03 +/* IC mask version */ +#define FAN53555_ID2 0x04 +/* Monitor register */ +#define FAN53555_MONITOR 0x05 + +/* VSEL bit definitions */ +#define VSEL_BUCK_EN (1 << 7) +#define VSEL_MODE (1 << 6) +#define VSEL_NSEL_MASK 0x3F +/* Chip ID and Verison */ +#define DIE_ID 0x0F /* ID1 */ +#define DIE_REV 0x0F /* ID2 */ +/* Control bit definitions */ +#define CTL_OUTPUT_DISCHG (1 << 7) +#define CTL_SLEW_MASK (0x7 << 4) +#define CTL_SLEW_SHIFT 4 +#define CTL_RESET (1 << 2) + +#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */ + +/* IC Type */ +enum { + FAN53555_CHIP_ID_00 = 0, + FAN53555_CHIP_ID_01, + FAN53555_CHIP_ID_02, + FAN53555_CHIP_ID_03, + FAN53555_CHIP_ID_04, + FAN53555_CHIP_ID_05, +}; + +struct fan53555_device_info { + struct regmap *regmap; + struct device *dev; + struct regulator_desc desc; + struct regulator_dev *rdev; + struct regulator_init_data *regulator; + /* IC Type and Rev */ + int chip_id; + int chip_rev; + /* Voltage setting register */ + unsigned int vol_reg; + unsigned int sleep_reg; + /* Voltage range and step(linear) */ + unsigned int vsel_min; + unsigned int vsel_step; + /* Voltage slew rate limiting */ + unsigned int slew_rate; + /* Sleep voltage cache */ + unsigned int sleep_vol_cache; +}; + +static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + int ret; + + if (di->sleep_vol_cache == uV) + return 0; + ret = regulator_map_voltage_linear(rdev, uV, uV); + if (ret < 0) + return -EINVAL; + ret = regmap_update_bits(di->regmap, di->sleep_reg, + VSEL_NSEL_MASK, ret); + if (ret < 0) + return -EINVAL; + /* Cache the sleep voltage setting. + * Might not be the real voltage which is rounded */ + di->sleep_vol_cache = uV; + + return 0; +} + +static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + + switch (mode) { + case REGULATOR_MODE_FAST: + regmap_update_bits(di->regmap, di->vol_reg, + VSEL_MODE, VSEL_MODE); + break; + case REGULATOR_MODE_NORMAL: + regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0); + break; + default: + return -EINVAL; + } + return 0; +} + +static unsigned int fan53555_get_mode(struct regulator_dev *rdev) +{ + struct fan53555_device_info *di = rdev_get_drvdata(rdev); + unsigned int val; + int ret = 0; + + ret = regmap_read(di->regmap, di->vol_reg, &val); + if (ret < 0) + return ret; + if (val & VSEL_MODE) + return REGULATOR_MODE_FAST; + else + return REGULATOR_MODE_NORMAL; +} + +static struct regulator_ops fan53555_regulator_ops = { + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .set_suspend_voltage = fan53555_set_suspend_voltage, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_mode = fan53555_set_mode, + .get_mode = fan53555_get_mode, +}; + +/* For 00,01,03,05 options: + * VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V. + * For 04 option: + * VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V. + * */ +static int fan53555_device_setup(struct fan53555_device_info *di, + struct fan53555_platform_data *pdata) +{ + unsigned int reg, data, mask; + + /* Setup voltage control register */ + switch (pdata->sleep_vsel_id) { + case FAN53555_VSEL_ID_0: + di->sleep_reg = FAN53555_VSEL0; + di->vol_reg = FAN53555_VSEL1; + break; + case FAN53555_VSEL_ID_1: + di->sleep_reg = FAN53555_VSEL1; + di->vol_reg = FAN53555_VSEL0; + break; + default: + dev_err(di->dev, "Invalid VSEL ID!\n"); + return -EINVAL; + } + /* Init voltage range and step */ + switch (di->chip_id) { + case FAN53555_CHIP_ID_00: + case FAN53555_CHIP_ID_01: + case FAN53555_CHIP_ID_03: + case FAN53555_CHIP_ID_05: + di->vsel_min = 600000; + di->vsel_step = 10000; + break; + case FAN53555_CHIP_ID_04: + di->vsel_min = 603000; + di->vsel_step = 12826; + break; + default: + dev_err(di->dev, + "Chip ID[%d]\n not supported!\n", di->chip_id); + return -EINVAL; + } + /* Init slew rate */ + if (pdata->slew_rate & 0x7) + di->slew_rate = pdata->slew_rate; + else + di->slew_rate = FAN53555_SLEW_RATE_64MV; + reg = FAN53555_CONTROL; + data = di->slew_rate << CTL_SLEW_SHIFT; + mask = CTL_SLEW_MASK; + return regmap_update_bits(di->regmap, reg, mask, data); +} + +static int fan53555_regulator_register(struct fan53555_device_info *di, + struct regulator_config *config) +{ + struct regulator_desc *rdesc = &di->desc; + + rdesc->name = "fan53555-reg"; + rdesc->ops = &fan53555_regulator_ops; + rdesc->type = REGULATOR_VOLTAGE; + rdesc->n_voltages = FAN53555_NVOLTAGES; + rdesc->enable_reg = di->vol_reg; + rdesc->enable_mask = VSEL_BUCK_EN; + rdesc->min_uV = di->vsel_min; + rdesc->uV_step = di->vsel_step; + rdesc->vsel_reg = di->vol_reg; + rdesc->vsel_mask = VSEL_NSEL_MASK; + rdesc->owner = THIS_MODULE; + + di->rdev = regulator_register(&di->desc, config); + if (IS_ERR(di->rdev)) + return PTR_ERR(di->rdev); + return 0; + +} + +static struct regmap_config fan53555_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int __devinit fan53555_regulator_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fan53555_device_info *di; + struct fan53555_platform_data *pdata; + struct regulator_config config = { }; + unsigned int val; + int ret; + + pdata = client->dev.platform_data; + if (!pdata || !pdata->regulator) { + dev_err(&client->dev, "Platform data not found!\n"); + return -ENODEV; + } + + di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info), + GFP_KERNEL); + if (!di) { + dev_err(&client->dev, "Failed to allocate device info data!\n"); + return -ENOMEM; + } + di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config); + if (IS_ERR(di->regmap)) { + dev_err(&client->dev, "Failed to allocate regmap!\n"); + return PTR_ERR(di->regmap); + } + di->dev = &client->dev; + di->regulator = pdata->regulator; + i2c_set_clientdata(client, di); + /* Get chip ID */ + ret = regmap_read(di->regmap, FAN53555_ID1, &val); + if (ret < 0) { + dev_err(&client->dev, "Failed to get chip ID!\n"); + return -ENODEV; + } + di->chip_id = val & DIE_ID; + /* Get chip revision */ + ret = regmap_read(di->regmap, FAN53555_ID2, &val); + if (ret < 0) { + dev_err(&client->dev, "Failed to get chip Rev!\n"); + return -ENODEV; + } + di->chip_rev = val & DIE_REV; + dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n", + di->chip_id, di->chip_rev); + /* Device init */ + ret = fan53555_device_setup(di, pdata); + if (ret < 0) { + dev_err(&client->dev, "Failed to setup device!\n"); + return ret; + } + /* Register regulator */ + config.dev = di->dev; + config.init_data = di->regulator; + config.regmap = di->regmap; + config.driver_data = di; + ret = fan53555_regulator_register(di, &config); + if (ret < 0) + dev_err(&client->dev, "Failed to register regulator!\n"); + return ret; + +} + +static int __devexit fan53555_regulator_remove(struct i2c_client *client) +{ + struct fan53555_device_info *di = i2c_get_clientdata(client); + + regulator_unregister(di->rdev); + return 0; +} + +static const struct i2c_device_id fan53555_id[] = { + {"fan53555", -1}, + { }, +}; + +static struct i2c_driver fan53555_regulator_driver = { + .driver = { + .name = "fan53555-regulator", + }, + .probe = fan53555_regulator_probe, + .remove = __devexit_p(fan53555_regulator_remove), + .id_table = fan53555_id, +}; + +module_i2c_driver(fan53555_regulator_driver); + +MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>"); +MODULE_DESCRIPTION("FAN53555 regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c index 1d145a07ada9..d8ecf49a5777 100644 --- a/drivers/regulator/isl6271a-regulator.c +++ b/drivers/regulator/isl6271a-regulator.c @@ -73,13 +73,7 @@ static struct regulator_ops isl_core_ops = { .map_voltage = regulator_map_voltage_linear, }; -static int isl6271a_get_fixed_voltage(struct regulator_dev *dev) -{ - return dev->desc->min_uV; -} - static struct regulator_ops isl_fixed_ops = { - .get_voltage = isl6271a_get_fixed_voltage, .list_voltage = regulator_list_voltage_linear, }; diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 212c38eaba70..708f4b6a17dc 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -86,6 +86,10 @@ #define EXTERN_DVS_USED 0 #define MAX_DELAY 6 +/* Default DVS Mode */ +#define LP8720_DEFAULT_DVS 0 +#define LP8725_DEFAULT_DVS BIT(2) + /* dump registers in regmap-debugfs */ #define MAX_REGISTERS 0x0F @@ -269,9 +273,9 @@ static int lp872x_regulator_enable_time(struct regulator_dev *rdev) return val > MAX_DELAY ? 0 : val * time_step_us; } -static void lp872x_set_dvs(struct lp872x *lp, int gpio) +static void lp872x_set_dvs(struct lp872x *lp, enum lp872x_dvs_sel dvs_sel, + int gpio) { - enum lp872x_dvs_sel dvs_sel = lp->pdata->dvs->vsel; enum lp872x_dvs_state state; state = dvs_sel == SEL_V1 ? DVS_HIGH : DVS_LOW; @@ -339,10 +343,10 @@ static int lp872x_buck_set_voltage_sel(struct regulator_dev *rdev, struct lp872x *lp = rdev_get_drvdata(rdev); enum lp872x_regulator_id buck = rdev_get_id(rdev); u8 addr, mask = LP872X_VOUT_M; - struct lp872x_dvs *dvs = lp->pdata->dvs; + struct lp872x_dvs *dvs = lp->pdata ? lp->pdata->dvs : NULL; if (dvs && gpio_is_valid(dvs->gpio)) - lp872x_set_dvs(lp, dvs->gpio); + lp872x_set_dvs(lp, dvs->vsel, dvs->gpio); addr = lp872x_select_buck_vout_addr(lp, buck); if (!lp872x_is_valid_buck_addr(addr)) @@ -374,8 +378,8 @@ static int lp8725_buck_set_current_limit(struct regulator_dev *rdev, { struct lp872x *lp = rdev_get_drvdata(rdev); enum lp872x_regulator_id buck = rdev_get_id(rdev); - int i, max = ARRAY_SIZE(lp8725_buck_uA); - u8 addr, val; + int i; + u8 addr; switch (buck) { case LP8725_ID_BUCK1: @@ -388,17 +392,15 @@ static int lp8725_buck_set_current_limit(struct regulator_dev *rdev, return -EINVAL; } - for (i = 0 ; i < max ; i++) + for (i = ARRAY_SIZE(lp8725_buck_uA) - 1 ; i >= 0; i--) { if (lp8725_buck_uA[i] >= min_uA && lp8725_buck_uA[i] <= max_uA) - break; - - if (i == max) - return -EINVAL; - - val = i << LP8725_BUCK_CL_S; + return lp872x_update_bits(lp, addr, + LP8725_BUCK_CL_M, + i << LP8725_BUCK_CL_S); + } - return lp872x_update_bits(lp, addr, LP8725_BUCK_CL_M, val); + return -EINVAL; } static int lp8725_buck_get_current_limit(struct regulator_dev *rdev) @@ -727,39 +729,16 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, }; -static int lp872x_check_dvs_validity(struct lp872x *lp) -{ - struct lp872x_dvs *dvs = lp->pdata->dvs; - u8 val = 0; - int ret; - - ret = lp872x_read_byte(lp, LP872X_GENERAL_CFG, &val); - if (ret) - return ret; - - ret = 0; - if (lp->chipid == LP8720) { - if (val & LP8720_EXT_DVS_M) - ret = dvs ? 0 : -EINVAL; - } else { - if ((val & LP8725_DVS1_M) == EXTERN_DVS_USED) - ret = dvs ? 0 : -EINVAL; - } - - return ret; -} - static int lp872x_init_dvs(struct lp872x *lp) { int ret, gpio; - struct lp872x_dvs *dvs = lp->pdata->dvs; + struct lp872x_dvs *dvs = lp->pdata ? lp->pdata->dvs : NULL; enum lp872x_dvs_state pinstate; + u8 mask[] = { LP8720_EXT_DVS_M, LP8725_DVS1_M | LP8725_DVS2_M }; + u8 default_dvs_mode[] = { LP8720_DEFAULT_DVS, LP8725_DEFAULT_DVS }; - ret = lp872x_check_dvs_validity(lp); - if (ret) { - dev_warn(lp->dev, "invalid dvs data: %d\n", ret); - return ret; - } + if (!dvs) + goto set_default_dvs_mode; gpio = dvs->gpio; if (!gpio_is_valid(gpio)) { @@ -778,6 +757,10 @@ static int lp872x_init_dvs(struct lp872x *lp) lp->dvs_gpio = gpio; return 0; + +set_default_dvs_mode: + return lp872x_update_bits(lp, LP872X_GENERAL_CFG, mask[lp->chipid], + default_dvs_mode[lp->chipid]); } static int lp872x_config(struct lp872x *lp) @@ -785,24 +768,29 @@ static int lp872x_config(struct lp872x *lp) struct lp872x_platform_data *pdata = lp->pdata; int ret; - if (!pdata->update_config) - return 0; + if (!pdata || !pdata->update_config) + goto init_dvs; ret = lp872x_write_byte(lp, LP872X_GENERAL_CFG, pdata->general_config); if (ret) return ret; +init_dvs: return lp872x_init_dvs(lp); } static struct regulator_init_data *lp872x_find_regulator_init_data(int id, struct lp872x *lp) { + struct lp872x_platform_data *pdata = lp->pdata; int i; + if (!pdata) + return NULL; + for (i = 0; i < lp->num_regulators; i++) { - if (lp->pdata->regulator_data[i].id == id) - return lp->pdata->regulator_data[i].init_data; + if (pdata->regulator_data[i].id == id) + return pdata->regulator_data[i].init_data; } return NULL; @@ -863,18 +851,12 @@ static const struct regmap_config lp872x_regmap_config = { static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) { struct lp872x *lp; - struct lp872x_platform_data *pdata = cl->dev.platform_data; int ret, size, num_regulators; const int lp872x_num_regulators[] = { [LP8720] = LP8720_NUM_REGULATORS, [LP8725] = LP8725_NUM_REGULATORS, }; - if (!pdata) { - dev_err(&cl->dev, "no platform data\n"); - return -EINVAL; - } - lp = devm_kzalloc(&cl->dev, sizeof(struct lp872x), GFP_KERNEL); if (!lp) goto err_mem; @@ -894,7 +876,7 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) } lp->dev = &cl->dev; - lp->pdata = pdata; + lp->pdata = cl->dev.platform_data; lp->chipid = id->driver_data; lp->num_regulators = num_regulators; i2c_set_clientdata(cl, lp); diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c index 6356e821400f..ba3e0aa402de 100644 --- a/drivers/regulator/lp8788-buck.c +++ b/drivers/regulator/lp8788-buck.c @@ -69,6 +69,9 @@ #define PIN_HIGH 1 #define ENABLE_TIME_USEC 32 +#define BUCK_FPWM_MASK(x) (1 << (x)) +#define BUCK_FPWM_SHIFT(x) (x) + enum lp8788_dvs_state { DVS_LOW = GPIOF_OUT_INIT_LOW, DVS_HIGH = GPIOF_OUT_INIT_HIGH, @@ -86,15 +89,9 @@ enum lp8788_buck_id { BUCK4, }; -struct lp8788_pwm_map { - u8 mask; - u8 shift; -}; - struct lp8788_buck { struct lp8788 *lp; struct regulator_dev *regulator; - struct lp8788_pwm_map *pmap; void *dvs; }; @@ -106,29 +103,6 @@ static const int lp8788_buck_vtbl[] = { 1950000, 2000000, }; -/* buck pwm mode selection : used for set/get_mode in regulator ops - * @forced pwm : fast mode - * @auto pwm : normal mode - */ -static struct lp8788_pwm_map buck_pmap[] = { - [BUCK1] = { - .mask = LP8788_FPWM_BUCK1_M, - .shift = LP8788_FPWM_BUCK1_S, - }, - [BUCK2] = { - .mask = LP8788_FPWM_BUCK2_M, - .shift = LP8788_FPWM_BUCK2_S, - }, - [BUCK3] = { - .mask = LP8788_FPWM_BUCK3_M, - .shift = LP8788_FPWM_BUCK3_S, - }, - [BUCK4] = { - .mask = LP8788_FPWM_BUCK4_M, - .shift = LP8788_FPWM_BUCK4_S, - }, -}; - static const u8 buck1_vout_addr[] = { LP8788_BUCK1_VOUT0, LP8788_BUCK1_VOUT1, LP8788_BUCK1_VOUT2, LP8788_BUCK1_VOUT3, @@ -347,41 +321,37 @@ static int lp8788_buck_enable_time(struct regulator_dev *rdev) static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) { struct lp8788_buck *buck = rdev_get_drvdata(rdev); - struct lp8788_pwm_map *pmap = buck->pmap; - u8 val; - - if (!pmap) - return -EINVAL; + enum lp8788_buck_id id = rdev_get_id(rdev); + u8 mask, val; + mask = BUCK_FPWM_MASK(id); switch (mode) { case REGULATOR_MODE_FAST: - val = LP8788_FORCE_PWM << pmap->shift; + val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id); break; case REGULATOR_MODE_NORMAL: - val = LP8788_AUTO_PWM << pmap->shift; + val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id); break; default: return -EINVAL; } - return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, pmap->mask, val); + return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val); } static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev) { struct lp8788_buck *buck = rdev_get_drvdata(rdev); - struct lp8788_pwm_map *pmap = buck->pmap; + enum lp8788_buck_id id = rdev_get_id(rdev); u8 val; int ret; - if (!pmap) - return -EINVAL; - ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val); if (ret) return ret; - return val & pmap->mask ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; + return val & BUCK_FPWM_MASK(id) ? + REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; } static struct regulator_ops lp8788_buck12_ops = { @@ -459,27 +429,6 @@ static struct regulator_desc lp8788_buck_desc[] = { }, }; -static int lp8788_set_default_dvs_ctrl_mode(struct lp8788 *lp, - enum lp8788_buck_id id) -{ - u8 mask, val; - - switch (id) { - case BUCK1: - mask = LP8788_BUCK1_DVS_SEL_M; - val = LP8788_BUCK1_DVS_I2C; - break; - case BUCK2: - mask = LP8788_BUCK2_DVS_SEL_M; - val = LP8788_BUCK2_DVS_I2C; - break; - default: - return 0; - } - - return lp8788_update_bits(lp, LP8788_BUCK_DVS_SEL, mask, val); -} - static int _gpio_request(struct lp8788_buck *buck, int gpio, char *name) { struct device *dev = buck->lp->dev; @@ -530,6 +479,7 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) struct lp8788_platform_data *pdata = buck->lp->pdata; u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M }; u8 val[] = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN }; + u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C }; /* no dvs for buck3, 4 */ if (id == BUCK3 || id == BUCK4) @@ -550,7 +500,8 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) val[id]); set_default_dvs_mode: - return lp8788_set_default_dvs_ctrl_mode(buck->lp, id); + return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id], + default_dvs_mode[id]); } static __devinit int lp8788_buck_probe(struct platform_device *pdev) @@ -567,7 +518,6 @@ static __devinit int lp8788_buck_probe(struct platform_device *pdev) return -ENOMEM; buck->lp = lp; - buck->pmap = &buck_pmap[id]; ret = lp8788_init_dvs(buck, id); if (ret) diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c index d2122e41a96d..6796eeb47dc6 100644 --- a/drivers/regulator/lp8788-ldo.c +++ b/drivers/regulator/lp8788-ldo.c @@ -496,6 +496,7 @@ static struct regulator_desc lp8788_dldo_desc[] = { .name = "dldo12", .id = DLDO12, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_B, @@ -521,6 +522,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo2", .id = ALDO2, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_B, @@ -530,6 +532,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo3", .id = ALDO3, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_B, @@ -539,6 +542,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo4", .id = ALDO4, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_B, @@ -548,6 +552,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo5", .id = ALDO5, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_C, @@ -583,6 +588,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo8", .id = ALDO8, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_C, @@ -592,6 +598,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo9", .id = ALDO9, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_C, @@ -601,6 +608,7 @@ static struct regulator_desc lp8788_aldo_desc[] = { .name = "aldo10", .id = ALDO10, .ops = &lp8788_ldo_voltage_fixed_ops, + .n_voltages = 1, .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_LDO_C, diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c index c564af6f05a3..2a67d08658ad 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686.c @@ -66,7 +66,7 @@ enum max77686_ramp_rate { }; struct max77686_data { - struct regulator_dev **rdev; + struct regulator_dev *rdev[MAX77686_REGULATORS]; }; static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) @@ -265,6 +265,7 @@ static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev, rmatch.of_node = NULL; of_regulator_match(iodev->dev, regulators_np, &rmatch, 1); rdata[i].initdata = rmatch.init_data; + rdata[i].of_node = rmatch.of_node; } pdata->regulators = rdata; @@ -283,10 +284,8 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev) { struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev); - struct regulator_dev **rdev; struct max77686_data *max77686; - int i, size; - int ret = 0; + int i, ret = 0; struct regulator_config config = { }; dev_dbg(&pdev->dev, "%s\n", __func__); @@ -313,45 +312,38 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev) if (!max77686) return -ENOMEM; - size = sizeof(struct regulator_dev *) * MAX77686_REGULATORS; - max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!max77686->rdev) - return -ENOMEM; - - rdev = max77686->rdev; config.dev = &pdev->dev; config.regmap = iodev->regmap; platform_set_drvdata(pdev, max77686); for (i = 0; i < MAX77686_REGULATORS; i++) { config.init_data = pdata->regulators[i].initdata; + config.of_node = pdata->regulators[i].of_node; - rdev[i] = regulator_register(®ulators[i], &config); - if (IS_ERR(rdev[i])) { - ret = PTR_ERR(rdev[i]); + max77686->rdev[i] = regulator_register(®ulators[i], &config); + if (IS_ERR(max77686->rdev[i])) { + ret = PTR_ERR(max77686->rdev[i]); dev_err(&pdev->dev, "regulator init failed for %d\n", i); - rdev[i] = NULL; - goto err; + max77686->rdev[i] = NULL; + goto err; } } return 0; err: while (--i >= 0) - regulator_unregister(rdev[i]); + regulator_unregister(max77686->rdev[i]); return ret; } static int __devexit max77686_pmic_remove(struct platform_device *pdev) { struct max77686_data *max77686 = platform_get_drvdata(pdev); - struct regulator_dev **rdev = max77686->rdev; int i; for (i = 0; i < MAX77686_REGULATORS; i++) - if (rdev[i]) - regulator_unregister(rdev[i]); + regulator_unregister(max77686->rdev[i]); return 0; } diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c new file mode 100644 index 000000000000..af7607515ab9 --- /dev/null +++ b/drivers/regulator/max8907-regulator.c @@ -0,0 +1,408 @@ +/* + * max8907-regulator.c -- support regulators in max8907 + * + * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com> + * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * Portions based on drivers/regulator/tps65910-regulator.c, + * Copyright 2010 Texas Instruments Inc. + * Author: Graeme Gregory <gg@slimlogic.co.uk> + * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/mfd/core.h> +#include <linux/mfd/max8907.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define MAX8907_II2RR_VERSION_MASK 0xF0 +#define MAX8907_II2RR_VERSION_REV_A 0x00 +#define MAX8907_II2RR_VERSION_REV_B 0x10 +#define MAX8907_II2RR_VERSION_REV_C 0x30 + +struct max8907_regulator { + struct regulator_desc desc[MAX8907_NUM_REGULATORS]; + struct regulator_dev *rdev[MAX8907_NUM_REGULATORS]; +}; + +#define REG_MBATT() \ + [MAX8907_MBATT] = { \ + .name = "MBATT", \ + .supply_name = "mbatt", \ + .id = MAX8907_MBATT, \ + .ops = &max8907_mbatt_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + } + +#define REG_LDO(ids, supply, base, min, max, step) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &max8907_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base) + MAX8907_VOUT, \ + .vsel_mask = 0x3f, \ + .enable_reg = (base) + MAX8907_CTL, \ + .enable_mask = MAX8907_MASK_LDO_EN, \ + } + +#define REG_FIXED(ids, supply, voltage) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = 1, \ + .ops = &max8907_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (voltage), \ + } + +#define REG_OUT5V(ids, supply, base, voltage) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = 1, \ + .ops = &max8907_out5v_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (voltage), \ + .enable_reg = (base), \ + .enable_mask = MAX8907_MASK_OUT5V_EN, \ + } + +#define REG_BBAT(ids, supply, base, min, max, step) \ + [MAX8907_##ids] = { \ + .name = #ids, \ + .supply_name = supply, \ + .id = MAX8907_##ids, \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &max8907_bbat_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base), \ + .vsel_mask = MAX8907_MASK_VBBATTCV, \ + } + +#define LDO_750_50(id, supply, base) REG_LDO(id, supply, (base), \ + 750000, 3900000, 50000) +#define LDO_650_25(id, supply, base) REG_LDO(id, supply, (base), \ + 650000, 2225000, 25000) + +static struct regulator_ops max8907_mbatt_ops = { +}; + +static struct regulator_ops max8907_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_ops max8907_ldo_hwctl_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static struct regulator_ops max8907_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, +}; + +static struct regulator_ops max8907_out5v_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_ops max8907_out5v_hwctl_ops = { + .list_voltage = regulator_list_voltage_linear, +}; + +static struct regulator_ops max8907_bbat_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static struct regulator_desc max8907_regulators[] = { + REG_MBATT(), + REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000), + REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500), + REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000), + LDO_750_50(LDO1, "in1", MAX8907_REG_LDOCTL1), + LDO_650_25(LDO2, "in2", MAX8907_REG_LDOCTL2), + LDO_650_25(LDO3, "in3", MAX8907_REG_LDOCTL3), + LDO_750_50(LDO4, "in4", MAX8907_REG_LDOCTL4), + LDO_750_50(LDO5, "in5", MAX8907_REG_LDOCTL5), + LDO_750_50(LDO6, "in6", MAX8907_REG_LDOCTL6), + LDO_750_50(LDO7, "in7", MAX8907_REG_LDOCTL7), + LDO_750_50(LDO8, "in8", MAX8907_REG_LDOCTL8), + LDO_750_50(LDO9, "in9", MAX8907_REG_LDOCTL9), + LDO_750_50(LDO10, "in10", MAX8907_REG_LDOCTL10), + LDO_750_50(LDO11, "in11", MAX8907_REG_LDOCTL11), + LDO_750_50(LDO12, "in12", MAX8907_REG_LDOCTL12), + LDO_750_50(LDO13, "in13", MAX8907_REG_LDOCTL13), + LDO_750_50(LDO14, "in14", MAX8907_REG_LDOCTL14), + LDO_750_50(LDO15, "in15", MAX8907_REG_LDOCTL15), + LDO_750_50(LDO16, "in16", MAX8907_REG_LDOCTL16), + LDO_650_25(LDO17, "in17", MAX8907_REG_LDOCTL17), + LDO_650_25(LDO18, "in18", MAX8907_REG_LDOCTL18), + LDO_750_50(LDO19, "in19", MAX8907_REG_LDOCTL19), + LDO_750_50(LDO20, "in20", MAX8907_REG_LDOCTL20), + REG_OUT5V(OUT5V, "mbatt", MAX8907_REG_OUT5VEN, 5000000), + REG_OUT5V(OUT33V, "mbatt", MAX8907_REG_OUT33VEN, 3300000), + REG_BBAT(BBAT, "MBATT", MAX8907_REG_BBAT_CNFG, + 2400000, 3000000, 200000), + REG_FIXED(SDBY, "MBATT", 1200000), + REG_FIXED(VRTC, "MBATT", 3300000), +}; + +#ifdef CONFIG_OF + +#define MATCH(_name, _id) \ + [MAX8907_##_id] = { \ + .name = #_name, \ + .driver_data = (void *)&max8907_regulators[MAX8907_##_id], \ + } + +static struct of_regulator_match max8907_matches[] = { + MATCH(mbatt, MBATT), + MATCH(sd1, SD1), + MATCH(sd2, SD2), + MATCH(sd3, SD3), + MATCH(ldo1, LDO1), + MATCH(ldo2, LDO2), + MATCH(ldo3, LDO3), + MATCH(ldo4, LDO4), + MATCH(ldo5, LDO5), + MATCH(ldo6, LDO6), + MATCH(ldo7, LDO7), + MATCH(ldo8, LDO8), + MATCH(ldo9, LDO9), + MATCH(ldo10, LDO10), + MATCH(ldo11, LDO11), + MATCH(ldo12, LDO12), + MATCH(ldo13, LDO13), + MATCH(ldo14, LDO14), + MATCH(ldo15, LDO15), + MATCH(ldo16, LDO16), + MATCH(ldo17, LDO17), + MATCH(ldo18, LDO18), + MATCH(ldo19, LDO19), + MATCH(ldo20, LDO20), + MATCH(out5v, OUT5V), + MATCH(out33v, OUT33V), + MATCH(bbat, BBAT), + MATCH(sdby, SDBY), + MATCH(vrtc, VRTC), +}; + +static int max8907_regulator_parse_dt(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.parent->of_node; + struct device_node *regulators; + int ret; + + if (!pdev->dev.parent->of_node) + return 0; + + regulators = of_find_node_by_name(np, "regulators"); + if (!regulators) { + dev_err(&pdev->dev, "regulators node not found\n"); + return -EINVAL; + } + + ret = of_regulator_match(pdev->dev.parent, regulators, + max8907_matches, + ARRAY_SIZE(max8907_matches)); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", + ret); + return ret; + } + + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return max8907_matches[index].init_data; +} + +static inline struct device_node *match_of_node(int index) +{ + return max8907_matches[index].of_node; +} +#else +static int max8907_regulator_parse_dt(struct platform_device *pdev) +{ + return 0; +} + +static inline struct regulator_init_data *match_init_data(int index) +{ + return NULL; +} + +static inline struct device_node *match_of_node(int index) +{ + return NULL; +} +#endif + +static __devinit int max8907_regulator_probe(struct platform_device *pdev) +{ + struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent); + struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev); + int ret; + struct max8907_regulator *pmic; + unsigned int val; + int i; + struct regulator_config config = {}; + struct regulator_init_data *idata; + const char *mbatt_rail_name = NULL; + + ret = max8907_regulator_parse_dt(pdev); + if (ret) + return ret; + + pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) { + dev_err(&pdev->dev, "Failed to alloc pmic\n"); + return -ENOMEM; + } + platform_set_drvdata(pdev, pmic); + + memcpy(pmic->desc, max8907_regulators, sizeof(pmic->desc)); + + /* Backwards compatibility with MAX8907B; SD1 uses different voltages */ + regmap_read(max8907->regmap_gen, MAX8907_REG_II2RR, &val); + if ((val & MAX8907_II2RR_VERSION_MASK) == + MAX8907_II2RR_VERSION_REV_B) { + pmic->desc[MAX8907_SD1].min_uV = 637500; + pmic->desc[MAX8907_SD1].uV_step = 12500; + pmic->desc[MAX8907_SD1].n_voltages = + (1425000 - 637500) / 12500 + 1; + } + + for (i = 0; i < MAX8907_NUM_REGULATORS; i++) { + config.dev = pdev->dev.parent; + if (pdata) + idata = pdata->init_data[i]; + else + idata = match_init_data(i); + config.init_data = idata; + config.driver_data = pmic; + config.regmap = max8907->regmap_gen; + config.of_node = match_of_node(i); + + switch (pmic->desc[i].id) { + case MAX8907_MBATT: + if (idata && idata->constraints.name) + mbatt_rail_name = idata->constraints.name; + else + mbatt_rail_name = pmic->desc[i].name; + break; + case MAX8907_BBAT: + case MAX8907_SDBY: + case MAX8907_VRTC: + idata->supply_regulator = mbatt_rail_name; + break; + } + + if (pmic->desc[i].ops == &max8907_ldo_ops) { + regmap_read(config.regmap, pmic->desc[i].enable_reg, + &val); + if ((val & MAX8907_MASK_LDO_SEQ) != + MAX8907_MASK_LDO_SEQ) + pmic->desc[i].ops = &max8907_ldo_hwctl_ops; + } else if (pmic->desc[i].ops == &max8907_out5v_ops) { + regmap_read(config.regmap, pmic->desc[i].enable_reg, + &val); + if ((val & (MAX8907_MASK_OUT5V_VINEN | + MAX8907_MASK_OUT5V_ENSRC)) != + MAX8907_MASK_OUT5V_ENSRC) + pmic->desc[i].ops = &max8907_out5v_hwctl_ops; + } + + pmic->rdev[i] = regulator_register(&pmic->desc[i], &config); + if (IS_ERR(pmic->rdev[i])) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + pmic->desc[i].name); + ret = PTR_ERR(pmic->rdev[i]); + goto err_unregister_regulator; + } + } + + return 0; + +err_unregister_regulator: + while (--i >= 0) + regulator_unregister(pmic->rdev[i]); + return ret; +} + +static __devexit int max8907_regulator_remove(struct platform_device *pdev) +{ + struct max8907_regulator *pmic = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < MAX8907_NUM_REGULATORS; i++) + regulator_unregister(pmic->rdev[i]); + + return 0; +} + +static struct platform_driver max8907_regulator_driver = { + .driver = { + .name = "max8907-regulator", + .owner = THIS_MODULE, + }, + .probe = max8907_regulator_probe, + .remove = __devexit_p(max8907_regulator_remove), +}; + +static int __init max8907_regulator_init(void) +{ + return platform_driver_register(&max8907_regulator_driver); +} + +subsys_initcall(max8907_regulator_init); + +static void __exit max8907_reg_exit(void) +{ + platform_driver_unregister(&max8907_regulator_driver); +} + +module_exit(max8907_reg_exit); + +MODULE_DESCRIPTION("MAX8907 regulator driver"); +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@maxim-ic.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:max8907-regulator"); diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c index 4932e3449fe1..0801a6d0c122 100644 --- a/drivers/regulator/mc13783-regulator.c +++ b/drivers/regulator/mc13783-regulator.c @@ -21,6 +21,30 @@ #include <linux/module.h> #include "mc13xxx.h" +#define MC13783_REG_SWITCHERS0 24 +/* Enable does not exist for SW1A */ +#define MC13783_REG_SWITCHERS0_SW1AEN 0 +#define MC13783_REG_SWITCHERS0_SW1AVSEL 0 +#define MC13783_REG_SWITCHERS0_SW1AVSEL_M (63 << 0) + +#define MC13783_REG_SWITCHERS1 25 +/* Enable does not exist for SW1B */ +#define MC13783_REG_SWITCHERS1_SW1BEN 0 +#define MC13783_REG_SWITCHERS1_SW1BVSEL 0 +#define MC13783_REG_SWITCHERS1_SW1BVSEL_M (63 << 0) + +#define MC13783_REG_SWITCHERS2 26 +/* Enable does not exist for SW2A */ +#define MC13783_REG_SWITCHERS2_SW2AEN 0 +#define MC13783_REG_SWITCHERS2_SW2AVSEL 0 +#define MC13783_REG_SWITCHERS2_SW2AVSEL_M (63 << 0) + +#define MC13783_REG_SWITCHERS3 27 +/* Enable does not exist for SW2B */ +#define MC13783_REG_SWITCHERS3_SW2BEN 0 +#define MC13783_REG_SWITCHERS3_SW2BVSEL 0 +#define MC13783_REG_SWITCHERS3_SW2BVSEL_M (63 << 0) + #define MC13783_REG_SWITCHERS5 29 #define MC13783_REG_SWITCHERS5_SW3EN (1 << 20) #define MC13783_REG_SWITCHERS5_SW3VSEL 18 @@ -93,6 +117,44 @@ /* Voltage Values */ +static const int mc13783_sw1x_val[] = { + 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, + 1500000, 1525000, 1550000, 1575000, + 1600000, 1625000, 1650000, 1675000, + 1700000, 1700000, 1700000, 1700000, + 1800000, 1800000, 1800000, 1800000, + 1850000, 1850000, 1850000, 1850000, + 2000000, 2000000, 2000000, 2000000, + 2100000, 2100000, 2100000, 2100000, + 2200000, 2200000, 2200000, 2200000, + 2200000, 2200000, 2200000, 2200000, + 2200000, 2200000, 2200000, 2200000, +}; + +static const int mc13783_sw2x_val[] = { + 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, + 1500000, 1525000, 1550000, 1575000, + 1600000, 1625000, 1650000, 1675000, + 1700000, 1700000, 1700000, 1700000, + 1800000, 1800000, 1800000, 1800000, + 1900000, 1900000, 1900000, 1900000, + 2000000, 2000000, 2000000, 2000000, + 2100000, 2100000, 2100000, 2100000, + 2200000, 2200000, 2200000, 2200000, + 2200000, 2200000, 2200000, 2200000, + 2200000, 2200000, 2200000, 2200000, +}; + static const unsigned int mc13783_sw3_val[] = { 5000000, 5000000, 5000000, 5500000, }; @@ -188,6 +250,10 @@ static struct regulator_ops mc13783_gpo_regulator_ops; MC13783_DEFINE(REG, _name, _reg, _vsel_reg, _voltages) static struct mc13xxx_regulator mc13783_regulators[] = { + MC13783_DEFINE_SW(SW1A, SWITCHERS0, SWITCHERS0, mc13783_sw1x_val), + MC13783_DEFINE_SW(SW1B, SWITCHERS1, SWITCHERS1, mc13783_sw1x_val), + MC13783_DEFINE_SW(SW2A, SWITCHERS2, SWITCHERS2, mc13783_sw2x_val), + MC13783_DEFINE_SW(SW2B, SWITCHERS3, SWITCHERS3, mc13783_sw2x_val), MC13783_DEFINE_SW(SW3, SWITCHERS5, SWITCHERS5, mc13783_sw3_val), MC13783_FIXED_DEFINE(REG, VAUDIO, REGULATORMODE0, mc13783_vaudio_val), @@ -238,9 +304,10 @@ static int mc13783_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, BUG_ON(val & ~mask); + mc13xxx_lock(priv->mc13xxx); ret = mc13xxx_reg_read(mc13783, MC13783_REG_POWERMISC, &valread); if (ret) - return ret; + goto out; /* Update the stored state for Power Gates. */ priv->powermisc_pwgt_state = @@ -253,7 +320,10 @@ static int mc13783_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, valread = (valread & ~MC13783_REG_POWERMISC_PWGTSPI_M) | priv->powermisc_pwgt_state; - return mc13xxx_reg_write(mc13783, MC13783_REG_POWERMISC, valread); + ret = mc13xxx_reg_write(mc13783, MC13783_REG_POWERMISC, valread); +out: + mc13xxx_unlock(priv->mc13xxx); + return ret; } static int mc13783_gpo_regulator_enable(struct regulator_dev *rdev) @@ -261,7 +331,6 @@ static int mc13783_gpo_regulator_enable(struct regulator_dev *rdev) struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators; int id = rdev_get_id(rdev); - int ret; u32 en_val = mc13xxx_regulators[id].enable_bit; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -271,12 +340,8 @@ static int mc13783_gpo_regulator_enable(struct regulator_dev *rdev) id == MC13783_REG_PWGT2SPI) en_val = 0; - mc13xxx_lock(priv->mc13xxx); - ret = mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit, + return mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit, en_val); - mc13xxx_unlock(priv->mc13xxx); - - return ret; } static int mc13783_gpo_regulator_disable(struct regulator_dev *rdev) @@ -284,7 +349,6 @@ static int mc13783_gpo_regulator_disable(struct regulator_dev *rdev) struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators; int id = rdev_get_id(rdev); - int ret; u32 dis_val = 0; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -294,12 +358,8 @@ static int mc13783_gpo_regulator_disable(struct regulator_dev *rdev) id == MC13783_REG_PWGT2SPI) dis_val = mc13xxx_regulators[id].enable_bit; - mc13xxx_lock(priv->mc13xxx); - ret = mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit, + return mc13783_powermisc_rmw(priv, mc13xxx_regulators[id].enable_bit, dis_val); - mc13xxx_unlock(priv->mc13xxx); - - return ret; } static int mc13783_gpo_regulator_is_enabled(struct regulator_dev *rdev) @@ -330,7 +390,6 @@ static struct regulator_ops mc13783_gpo_regulator_ops = { .is_enabled = mc13783_gpo_regulator_is_enabled, .list_voltage = regulator_list_voltage_table, .set_voltage = mc13xxx_fixed_regulator_set_voltage, - .get_voltage = mc13xxx_fixed_regulator_get_voltage, }; static int __devinit mc13783_regulator_probe(struct platform_device *pdev) diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index b388b746452e..1fa63812f7ac 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -305,9 +305,10 @@ static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, BUG_ON(val & ~mask); + mc13xxx_lock(priv->mc13xxx); ret = mc13xxx_reg_read(mc13892, MC13892_POWERMISC, &valread); if (ret) - return ret; + goto out; /* Update the stored state for Power Gates. */ priv->powermisc_pwgt_state = @@ -320,14 +321,16 @@ static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, valread = (valread & ~MC13892_POWERMISC_PWGTSPI_M) | priv->powermisc_pwgt_state; - return mc13xxx_reg_write(mc13892, MC13892_POWERMISC, valread); + ret = mc13xxx_reg_write(mc13892, MC13892_POWERMISC, valread); +out: + mc13xxx_unlock(priv->mc13xxx); + return ret; } static int mc13892_gpo_regulator_enable(struct regulator_dev *rdev) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); - int ret; u32 en_val = mc13892_regulators[id].enable_bit; u32 mask = mc13892_regulators[id].enable_bit; @@ -340,18 +343,13 @@ static int mc13892_gpo_regulator_enable(struct regulator_dev *rdev) if (id == MC13892_GPO4) mask |= MC13892_POWERMISC_GPO4ADINEN; - mc13xxx_lock(priv->mc13xxx); - ret = mc13892_powermisc_rmw(priv, mask, en_val); - mc13xxx_unlock(priv->mc13xxx); - - return ret; + return mc13892_powermisc_rmw(priv, mask, en_val); } static int mc13892_gpo_regulator_disable(struct regulator_dev *rdev) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); int id = rdev_get_id(rdev); - int ret; u32 dis_val = 0; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -360,12 +358,8 @@ static int mc13892_gpo_regulator_disable(struct regulator_dev *rdev) if (id == MC13892_PWGT1SPI || id == MC13892_PWGT2SPI) dis_val = mc13892_regulators[id].enable_bit; - mc13xxx_lock(priv->mc13xxx); - ret = mc13892_powermisc_rmw(priv, mc13892_regulators[id].enable_bit, + return mc13892_powermisc_rmw(priv, mc13892_regulators[id].enable_bit, dis_val); - mc13xxx_unlock(priv->mc13xxx); - - return ret; } static int mc13892_gpo_regulator_is_enabled(struct regulator_dev *rdev) @@ -396,14 +390,13 @@ static struct regulator_ops mc13892_gpo_regulator_ops = { .is_enabled = mc13892_gpo_regulator_is_enabled, .list_voltage = regulator_list_voltage_table, .set_voltage = mc13xxx_fixed_regulator_set_voltage, - .get_voltage = mc13xxx_fixed_regulator_get_voltage, }; -static int mc13892_sw_regulator_get_voltage(struct regulator_dev *rdev) +static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); int ret, id = rdev_get_id(rdev); - unsigned int val, hi; + unsigned int val; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -414,17 +407,11 @@ static int mc13892_sw_regulator_get_voltage(struct regulator_dev *rdev) if (ret) return ret; - hi = val & MC13892_SWITCHERS0_SWxHI; val = (val & mc13892_regulators[id].vsel_mask) >> mc13892_regulators[id].vsel_shift; dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val); - if (hi) - val = (25000 * val) + 1100000; - else - val = (25000 * val) + 600000; - return val; } @@ -432,37 +419,25 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); - int hi, value, mask, id = rdev_get_id(rdev); - u32 valread; + int volt, mask, id = rdev_get_id(rdev); + u32 reg_value; int ret; - value = rdev->desc->volt_table[selector]; + volt = rdev->desc->volt_table[selector]; + mask = mc13892_regulators[id].vsel_mask; + reg_value = selector << mc13892_regulators[id].vsel_shift; + + if (volt > 1375000) { + mask |= MC13892_SWITCHERS0_SWxHI; + reg_value |= MC13892_SWITCHERS0_SWxHI; + } else if (volt < 1100000) { + mask |= MC13892_SWITCHERS0_SWxHI; + reg_value &= ~MC13892_SWITCHERS0_SWxHI; + } mc13xxx_lock(priv->mc13xxx); - ret = mc13xxx_reg_read(priv->mc13xxx, - mc13892_regulators[id].vsel_reg, &valread); - if (ret) - goto err; - - if (value > 1375000) - hi = 1; - else if (value < 1100000) - hi = 0; - else - hi = valread & MC13892_SWITCHERS0_SWxHI; - - if (hi) { - value = (value - 1100000) / 25000; - value |= MC13892_SWITCHERS0_SWxHI; - } else - value = (value - 600000) / 25000; - - mask = mc13892_regulators[id].vsel_mask | MC13892_SWITCHERS0_SWxHI; - valread = (valread & ~mask) | - (value << mc13892_regulators[id].vsel_shift); - ret = mc13xxx_reg_write(priv->mc13xxx, mc13892_regulators[id].vsel_reg, - valread); -err: + ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, mask, + reg_value); mc13xxx_unlock(priv->mc13xxx); return ret; @@ -471,7 +446,7 @@ err: static struct regulator_ops mc13892_sw_regulator_ops = { .list_voltage = regulator_list_voltage_table, .set_voltage_sel = mc13892_sw_regulator_set_voltage_sel, - .get_voltage = mc13892_sw_regulator_get_voltage, + .get_voltage_sel = mc13892_sw_regulator_get_voltage_sel, }; static int mc13892_vcam_set_mode(struct regulator_dev *rdev, unsigned int mode) diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c index d6eda28ca5d0..88cbb832d555 100644 --- a/drivers/regulator/mc13xxx-regulator-core.c +++ b/drivers/regulator/mc13xxx-regulator-core.c @@ -143,30 +143,21 @@ int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV, __func__, id, min_uV, max_uV); if (min_uV <= rdev->desc->volt_table[0] && - rdev->desc->volt_table[0] <= max_uV) + rdev->desc->volt_table[0] <= max_uV) { + *selector = 0; return 0; - else + } else { return -EINVAL; + } } EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_set_voltage); -int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev) -{ - int id = rdev_get_id(rdev); - - dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); - - return rdev->desc->volt_table[0]; -} -EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_get_voltage); - struct regulator_ops mc13xxx_fixed_regulator_ops = { .enable = mc13xxx_regulator_enable, .disable = mc13xxx_regulator_disable, .is_enabled = mc13xxx_regulator_is_enabled, .list_voltage = regulator_list_voltage_table, .set_voltage = mc13xxx_fixed_regulator_set_voltage, - .get_voltage = mc13xxx_fixed_regulator_get_voltage, }; EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_ops); diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h index eaff5510b6df..06c8903f182a 100644 --- a/drivers/regulator/mc13xxx.h +++ b/drivers/regulator/mc13xxx.h @@ -34,7 +34,6 @@ struct mc13xxx_regulator_priv { extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned *selector); -extern int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev); #ifdef CONFIG_OF extern int mc13xxx_get_num_regulators_dt(struct platform_device *pdev); diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 3e4106f2bda9..6f684916fd79 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -92,16 +92,18 @@ struct regulator_init_data *of_get_regulator_init_data(struct device *dev, EXPORT_SYMBOL_GPL(of_get_regulator_init_data); /** - * of_regulator_match - extract regulator init data when node - * property "regulator-compatible" matches with the regulator name. + * of_regulator_match - extract multiple regulator init data from device tree. * @dev: device requesting the data * @node: parent device node of the regulators * @matches: match table for the regulators * @num_matches: number of entries in match table * - * This function uses a match table specified by the regulator driver and - * looks up the corresponding init data in the device tree if - * regulator-compatible matches. Note that the match table is modified + * This function uses a match table specified by the regulator driver to + * parse regulator init data from the device tree. @node is expected to + * contain a set of child nodes, each providing the init data for one + * regulator. The data parsed from a child node will be matched to a regulator + * based on either the deprecated property regulator-compatible if present, + * or otherwise the child node's name. Note that the match table is modified * in place. * * Returns the number of matches found or a negative error code on failure. @@ -112,26 +114,23 @@ int of_regulator_match(struct device *dev, struct device_node *node, { unsigned int count = 0; unsigned int i; - const char *regulator_comp; + const char *name; struct device_node *child; if (!dev || !node) return -EINVAL; for_each_child_of_node(node, child) { - regulator_comp = of_get_property(child, + name = of_get_property(child, "regulator-compatible", NULL); - if (!regulator_comp) { - dev_err(dev, "regulator-compatible is missing for node %s\n", - child->name); - continue; - } + if (!name) + name = child->name; for (i = 0; i < num_matches; i++) { struct of_regulator_match *match = &matches[i]; if (match->of_node) continue; - if (strcmp(match->name, regulator_comp)) + if (strcmp(match->name, name)) continue; match->init_data = diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 46c7e88f8381..2ba7502fa3b2 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -443,44 +443,6 @@ static int palmas_list_voltage_ldo(struct regulator_dev *dev, return 850000 + (selector * 50000); } -static int palmas_get_voltage_ldo_sel(struct regulator_dev *dev) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(dev); - int id = rdev_get_id(dev); - int selector; - unsigned int reg; - unsigned int addr; - - addr = palmas_regs_info[id].vsel_addr; - - palmas_ldo_read(pmic->palmas, addr, ®); - - selector = reg & PALMAS_LDO1_VOLTAGE_VSEL_MASK; - - /* Adjust selector to match list_voltage ranges */ - if (selector > 49) - selector = 49; - - return selector; -} - -static int palmas_set_voltage_ldo_sel(struct regulator_dev *dev, - unsigned selector) -{ - struct palmas_pmic *pmic = rdev_get_drvdata(dev); - int id = rdev_get_id(dev); - unsigned int reg = 0; - unsigned int addr; - - addr = palmas_regs_info[id].vsel_addr; - - reg = selector; - - palmas_ldo_write(pmic->palmas, addr, reg); - - return 0; -} - static int palmas_map_voltage_ldo(struct regulator_dev *rdev, int min_uV, int max_uV) { @@ -505,8 +467,8 @@ static struct regulator_ops palmas_ops_ldo = { .is_enabled = palmas_is_enabled_ldo, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, - .get_voltage_sel = palmas_get_voltage_ldo_sel, - .set_voltage_sel = palmas_set_voltage_ldo_sel, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = palmas_list_voltage_ldo, .map_voltage = palmas_map_voltage_ldo, }; @@ -757,6 +719,9 @@ static __devinit int palmas_probe(struct platform_device *pdev) pmic->desc[id].type = REGULATOR_VOLTAGE; pmic->desc[id].owner = THIS_MODULE; + pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, + palmas_regs_info[id].vsel_addr); + pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, palmas_regs_info[id].ctrl_addr); pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE; diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 4669dc9ac74a..926f9c8f2fac 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -24,7 +24,7 @@ #include <linux/mfd/samsung/s2mps11.h> struct s2mps11_info { - struct regulator_dev **rdev; + struct regulator_dev *rdev[S2MPS11_REGULATOR_MAX]; int ramp_delay2; int ramp_delay34; @@ -236,9 +236,8 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev) struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); struct regulator_config config = { }; - struct regulator_dev **rdev; struct s2mps11_info *s2mps11; - int i, ret, size; + int i, ret; unsigned char ramp_enable, ramp_reg = 0; if (!pdata) { @@ -251,13 +250,6 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev) if (!s2mps11) return -ENOMEM; - size = sizeof(struct regulator_dev *) * S2MPS11_REGULATOR_MAX; - s2mps11->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!s2mps11->rdev) { - return -ENOMEM; - } - - rdev = s2mps11->rdev; platform_set_drvdata(pdev, s2mps11); s2mps11->ramp_delay2 = pdata->buck2_ramp_delay; @@ -297,12 +289,12 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev) config.init_data = pdata->regulators[i].initdata; config.driver_data = s2mps11; - rdev[i] = regulator_register(®ulators[i], &config); - if (IS_ERR(rdev[i])) { - ret = PTR_ERR(rdev[i]); + s2mps11->rdev[i] = regulator_register(®ulators[i], &config); + if (IS_ERR(s2mps11->rdev[i])) { + ret = PTR_ERR(s2mps11->rdev[i]); dev_err(&pdev->dev, "regulator init failed for %d\n", i); - rdev[i] = NULL; + s2mps11->rdev[i] = NULL; goto err; } } @@ -310,8 +302,7 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev) return 0; err: for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) - if (rdev[i]) - regulator_unregister(rdev[i]); + regulator_unregister(s2mps11->rdev[i]); return ret; } @@ -319,12 +310,10 @@ err: static int __devexit s2mps11_pmic_remove(struct platform_device *pdev) { struct s2mps11_info *s2mps11 = platform_get_drvdata(pdev); - struct regulator_dev **rdev = s2mps11->rdev; int i; for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) - if (rdev[i]) - regulator_unregister(rdev[i]); + regulator_unregister(s2mps11->rdev[i]); return 0; } diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c index 947ece933d90..058d2f2675e9 100644 --- a/drivers/regulator/tps6524x-regulator.c +++ b/drivers/regulator/tps6524x-regulator.c @@ -502,15 +502,13 @@ static int set_current_limit(struct regulator_dev *rdev, int min_uA, if (info->n_ilimsels == 1) return -EINVAL; - for (i = 0; i < info->n_ilimsels; i++) + for (i = info->n_ilimsels - 1; i >= 0; i--) { if (min_uA <= info->ilimsels[i] && max_uA >= info->ilimsels[i]) - break; - - if (i >= info->n_ilimsels) - return -EINVAL; + return write_field(hw, &info->ilimsel, i); + } - return write_field(hw, &info->ilimsel, i); + return -EINVAL; } static int get_current_limit(struct regulator_dev *rdev) diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index 19241fc30050..ce1e7cb8d513 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -57,9 +57,6 @@ struct tps6586x_regulator { struct regulator_desc desc; - int volt_reg; - int volt_shift; - int volt_nbits; int enable_bit[2]; int enable_reg[2]; @@ -81,10 +78,10 @@ static int tps6586x_set_voltage_sel(struct regulator_dev *rdev, int ret, val, rid = rdev_get_id(rdev); uint8_t mask; - val = selector << ri->volt_shift; - mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift; + val = selector << (ffs(rdev->desc->vsel_mask) - 1); + mask = rdev->desc->vsel_mask; - ret = tps6586x_update(parent, ri->volt_reg, val, mask); + ret = tps6586x_update(parent, rdev->desc->vsel_reg, val, mask); if (ret) return ret; @@ -100,66 +97,17 @@ static int tps6586x_set_voltage_sel(struct regulator_dev *rdev, return ret; } -static int tps6586x_get_voltage_sel(struct regulator_dev *rdev) -{ - struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps6586x_dev(rdev); - uint8_t val, mask; - int ret; - - ret = tps6586x_read(parent, ri->volt_reg, &val); - if (ret) - return ret; - - mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift; - val = (val & mask) >> ri->volt_shift; - - if (val >= ri->desc.n_voltages) - BUG(); - - return val; -} - -static int tps6586x_regulator_enable(struct regulator_dev *rdev) -{ - struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps6586x_dev(rdev); - - return tps6586x_set_bits(parent, ri->enable_reg[0], - 1 << ri->enable_bit[0]); -} - -static int tps6586x_regulator_disable(struct regulator_dev *rdev) -{ - struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps6586x_dev(rdev); - - return tps6586x_clr_bits(parent, ri->enable_reg[0], - 1 << ri->enable_bit[0]); -} - -static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev) -{ - struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps6586x_dev(rdev); - uint8_t reg_val; - int ret; - - ret = tps6586x_read(parent, ri->enable_reg[0], ®_val); - if (ret) - return ret; - - return !!(reg_val & (1 << ri->enable_bit[0])); -} - static struct regulator_ops tps6586x_regulator_ops = { .list_voltage = regulator_list_voltage_table, - .get_voltage_sel = tps6586x_get_voltage_sel, + .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = tps6586x_set_voltage_sel, - .is_enabled = tps6586x_regulator_is_enabled, - .enable = tps6586x_regulator_enable, - .disable = tps6586x_regulator_disable, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, +}; + +static struct regulator_ops tps6586x_sys_regulator_ops = { }; static const unsigned int tps6586x_ldo0_voltages[] = { @@ -202,10 +150,11 @@ static const unsigned int tps6586x_dvm_voltages[] = { .n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages), \ .volt_table = tps6586x_##vdata##_voltages, \ .owner = THIS_MODULE, \ + .enable_reg = TPS6586X_SUPPLY##ereg0, \ + .enable_mask = 1 << (ebit0), \ + .vsel_reg = TPS6586X_##vreg, \ + .vsel_mask = ((1 << (nbits)) - 1) << (shift), \ }, \ - .volt_reg = TPS6586X_##vreg, \ - .volt_shift = (shift), \ - .volt_nbits = (nbits), \ .enable_reg[0] = TPS6586X_SUPPLY##ereg0, \ .enable_bit[0] = (ebit0), \ .enable_reg[1] = TPS6586X_SUPPLY##ereg1, \ @@ -230,15 +179,28 @@ static const unsigned int tps6586x_dvm_voltages[] = { TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \ } +#define TPS6586X_SYS_REGULATOR() \ +{ \ + .desc = { \ + .supply_name = "sys", \ + .name = "REG-SYS", \ + .ops = &tps6586x_sys_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = TPS6586X_ID_SYS, \ + .owner = THIS_MODULE, \ + }, \ +} + static struct tps6586x_regulator tps6586x_regulator[] = { + TPS6586X_SYS_REGULATOR(), TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0), TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2), - TPS6586X_LDO(LDO_5, NULL, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), + TPS6586X_LDO(LDO_5, "REG-SYS", ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4), TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5), TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6), TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), - TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), + TPS6586X_LDO(LDO_RTC, "REG-SYS", ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 77a71a5c17c3..7eb986a40746 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -10,6 +10,8 @@ */ #include <linux/module.h> +#include <linux/string.h> +#include <linux/slab.h> #include <linux/init.h> #include <linux/err.h> #include <linux/platform_device.h> @@ -624,18 +626,9 @@ static int twlfixed_list_voltage(struct regulator_dev *rdev, unsigned index) return info->min_mV * 1000; } -static int twlfixed_get_voltage(struct regulator_dev *rdev) -{ - struct twlreg_info *info = rdev_get_drvdata(rdev); - - return info->min_mV * 1000; -} - static struct regulator_ops twl4030fixed_ops = { .list_voltage = twlfixed_list_voltage, - .get_voltage = twlfixed_get_voltage, - .enable = twl4030reg_enable, .disable = twl4030reg_disable, .is_enabled = twl4030reg_is_enabled, @@ -648,8 +641,6 @@ static struct regulator_ops twl4030fixed_ops = { static struct regulator_ops twl6030fixed_ops = { .list_voltage = twlfixed_list_voltage, - .get_voltage = twlfixed_get_voltage, - .enable = twl6030reg_enable, .disable = twl6030reg_disable, .is_enabled = twl6030reg_is_enabled, @@ -659,13 +650,6 @@ static struct regulator_ops twl6030fixed_ops = { .get_status = twl6030reg_get_status, }; -static struct regulator_ops twl6030_fixed_resource = { - .enable = twl6030reg_enable, - .disable = twl6030reg_disable, - .is_enabled = twl6030reg_is_enabled, - .get_status = twl6030reg_get_status, -}; - /* * SMPS status and control */ @@ -757,37 +741,32 @@ static int twl6030smps_list_voltage(struct regulator_dev *rdev, unsigned index) return voltage; } -static int -twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, - unsigned int *selector) +static int twl6030smps_map_voltage(struct regulator_dev *rdev, int min_uV, + int max_uV) { - struct twlreg_info *info = rdev_get_drvdata(rdev); - int vsel = 0; + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = 0; switch (info->flags) { case 0: if (min_uV == 0) vsel = 0; else if ((min_uV >= 600000) && (min_uV <= 1300000)) { - int calc_uV; vsel = DIV_ROUND_UP(min_uV - 600000, 12500); vsel++; - calc_uV = twl6030smps_list_voltage(rdev, vsel); - if (calc_uV > max_uV) - return -EINVAL; } /* Values 1..57 for vsel are linear and can be calculated * values 58..62 are non linear. */ - else if ((min_uV > 1900000) && (max_uV >= 2100000)) + else if ((min_uV > 1900000) && (min_uV <= 2100000)) vsel = 62; - else if ((min_uV > 1800000) && (max_uV >= 1900000)) + else if ((min_uV > 1800000) && (min_uV <= 1900000)) vsel = 61; - else if ((min_uV > 1500000) && (max_uV >= 1800000)) + else if ((min_uV > 1500000) && (min_uV <= 1800000)) vsel = 60; - else if ((min_uV > 1350000) && (max_uV >= 1500000)) + else if ((min_uV > 1350000) && (min_uV <= 1500000)) vsel = 59; - else if ((min_uV > 1300000) && (max_uV >= 1350000)) + else if ((min_uV > 1300000) && (min_uV <= 1350000)) vsel = 58; else return -EINVAL; @@ -796,25 +775,21 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, if (min_uV == 0) vsel = 0; else if ((min_uV >= 700000) && (min_uV <= 1420000)) { - int calc_uV; vsel = DIV_ROUND_UP(min_uV - 700000, 12500); vsel++; - calc_uV = twl6030smps_list_voltage(rdev, vsel); - if (calc_uV > max_uV) - return -EINVAL; } /* Values 1..57 for vsel are linear and can be calculated * values 58..62 are non linear. */ - else if ((min_uV > 1900000) && (max_uV >= 2100000)) + else if ((min_uV > 1900000) && (min_uV <= 2100000)) vsel = 62; - else if ((min_uV > 1800000) && (max_uV >= 1900000)) + else if ((min_uV > 1800000) && (min_uV <= 1900000)) vsel = 61; - else if ((min_uV > 1350000) && (max_uV >= 1800000)) + else if ((min_uV > 1350000) && (min_uV <= 1800000)) vsel = 60; - else if ((min_uV > 1350000) && (max_uV >= 1500000)) + else if ((min_uV > 1350000) && (min_uV <= 1500000)) vsel = 59; - else if ((min_uV > 1300000) && (max_uV >= 1350000)) + else if ((min_uV > 1300000) && (min_uV <= 1350000)) vsel = 58; else return -EINVAL; @@ -830,17 +805,23 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, case SMPS_OFFSET_EN|SMPS_EXTENDED_EN: if (min_uV == 0) { vsel = 0; - } else if ((min_uV >= 2161000) && (max_uV <= 4321000)) { + } else if ((min_uV >= 2161000) && (min_uV <= 4321000)) { vsel = DIV_ROUND_UP(min_uV - 2161000, 38600); vsel++; } break; } - *selector = vsel; + return vsel; +} + +static int twl6030smps_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS, - vsel); + selector); } static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev) @@ -852,8 +833,9 @@ static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev) static struct regulator_ops twlsmps_ops = { .list_voltage = twl6030smps_list_voltage, + .map_voltage = twl6030smps_map_voltage, - .set_voltage = twl6030smps_set_voltage, + .set_voltage_sel = twl6030smps_set_voltage_sel, .get_voltage_sel = twl6030smps_get_voltage_sel, .enable = twl6030reg_enable, @@ -876,7 +858,7 @@ static struct regulator_ops twlsmps_ops = { 0x0, TWL6030, twl6030fixed_ops) #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \ -static struct twlreg_info TWL4030_INFO_##label = { \ +static const struct twlreg_info TWL4030_INFO_##label = { \ .base = offset, \ .id = num, \ .table_len = ARRAY_SIZE(label##_VSEL_table), \ @@ -894,7 +876,7 @@ static struct twlreg_info TWL4030_INFO_##label = { \ } #define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \ -static struct twlreg_info TWL4030_INFO_##label = { \ +static const struct twlreg_info TWL4030_INFO_##label = { \ .base = offset, \ .id = num, \ .remap = remap_conf, \ @@ -909,7 +891,7 @@ static struct twlreg_info TWL4030_INFO_##label = { \ } #define TWL6030_ADJUSTABLE_SMPS(label) \ -static struct twlreg_info TWL6030_INFO_##label = { \ +static const struct twlreg_info TWL6030_INFO_##label = { \ .desc = { \ .name = #label, \ .id = TWL6030_REG_##label, \ @@ -920,7 +902,7 @@ static struct twlreg_info TWL6030_INFO_##label = { \ } #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) \ -static struct twlreg_info TWL6030_INFO_##label = { \ +static const struct twlreg_info TWL6030_INFO_##label = { \ .base = offset, \ .min_mV = min_mVolts, \ .max_mV = max_mVolts, \ @@ -935,7 +917,7 @@ static struct twlreg_info TWL6030_INFO_##label = { \ } #define TWL6025_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) \ -static struct twlreg_info TWL6025_INFO_##label = { \ +static const struct twlreg_info TWL6025_INFO_##label = { \ .base = offset, \ .min_mV = min_mVolts, \ .max_mV = max_mVolts, \ @@ -951,7 +933,7 @@ static struct twlreg_info TWL6025_INFO_##label = { \ #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \ family, operations) \ -static struct twlreg_info TWLFIXED_INFO_##label = { \ +static const struct twlreg_info TWLFIXED_INFO_##label = { \ .base = offset, \ .id = num, \ .min_mV = mVolts, \ @@ -981,7 +963,7 @@ static struct twlreg_info TWLRES_INFO_##label = { \ } #define TWL6025_ADJUSTABLE_SMPS(label, offset) \ -static struct twlreg_info TWLSMPS_INFO_##label = { \ +static const struct twlreg_info TWLSMPS_INFO_##label = { \ .base = offset, \ .min_mV = 600, \ .max_mV = 2100, \ @@ -1138,6 +1120,7 @@ static int __devinit twlreg_probe(struct platform_device *pdev) { int i, id; struct twlreg_info *info; + const struct twlreg_info *template; struct regulator_init_data *initdata; struct regulation_constraints *c; struct regulator_dev *rdev; @@ -1147,17 +1130,17 @@ static int __devinit twlreg_probe(struct platform_device *pdev) match = of_match_device(twl_of_match, &pdev->dev); if (match) { - info = match->data; - id = info->desc.id; + template = match->data; + id = template->desc.id; initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node); drvdata = NULL; } else { id = pdev->id; initdata = pdev->dev.platform_data; - for (i = 0, info = NULL; i < ARRAY_SIZE(twl_of_match); i++) { - info = twl_of_match[i].data; - if (info && info->desc.id == id) + for (i = 0, template = NULL; i < ARRAY_SIZE(twl_of_match); i++) { + template = twl_of_match[i].data; + if (template && template->desc.id == id) break; } if (i == ARRAY_SIZE(twl_of_match)) @@ -1168,12 +1151,16 @@ static int __devinit twlreg_probe(struct platform_device *pdev) return -EINVAL; } - if (!info) + if (!template) return -ENODEV; if (!initdata) return -EINVAL; + info = kmemdup(template, sizeof (*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + if (drvdata) { /* copy the driver data into regulator data */ info->features = drvdata->features; @@ -1234,6 +1221,7 @@ static int __devinit twlreg_probe(struct platform_device *pdev) if (IS_ERR(rdev)) { dev_err(&pdev->dev, "can't register %s, %ld\n", info->desc.name, PTR_ERR(rdev)); + kfree(info); return PTR_ERR(rdev); } platform_set_drvdata(pdev, rdev); @@ -1255,7 +1243,11 @@ static int __devinit twlreg_probe(struct platform_device *pdev) static int __devexit twlreg_remove(struct platform_device *pdev) { - regulator_unregister(platform_get_drvdata(pdev)); + struct regulator_dev *rdev = platform_get_drvdata(pdev); + struct twlreg_info *info = rdev->reg_data; + + regulator_unregister(rdev); + kfree(info); return 0; } diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 7413885be01b..90cbcc683704 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -339,16 +339,15 @@ static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev, u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2; int i; - for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) { + for (i = ARRAY_SIZE(wm831x_dcdc_ilim) - 1; i >= 0; i--) { if ((min_uA <= wm831x_dcdc_ilim[i]) && (wm831x_dcdc_ilim[i] <= max_uA)) - break; + return wm831x_set_bits(wm831x, reg, + WM831X_DC1_HC_THR_MASK, + i << WM831X_DC1_HC_THR_SHIFT); } - if (i == ARRAY_SIZE(wm831x_dcdc_ilim)) - return -EINVAL; - return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, - i << WM831X_DC1_HC_THR_SHIFT); + return -EINVAL; } static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev) diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 5cb70ca1e98d..9af512672be1 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -205,6 +205,8 @@ static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev) /* Is it reporting under voltage? */ ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); + if (ret < 0) + return ret; if (ret & mask) return REGULATOR_STATUS_ERROR; @@ -237,6 +239,8 @@ static struct regulator_ops wm831x_gp_ldo_ops = { .set_mode = wm831x_gp_ldo_set_mode, .get_status = wm831x_gp_ldo_get_status, .get_optimum_mode = wm831x_gp_ldo_get_optimum_mode, + .get_bypass = regulator_get_bypass_regmap, + .set_bypass = regulator_set_bypass_regmap, .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, @@ -293,6 +297,8 @@ static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev) ldo->desc.vsel_mask = WM831X_LDO1_ON_VSEL_MASK; ldo->desc.enable_reg = WM831X_LDO_ENABLE; ldo->desc.enable_mask = 1 << id; + ldo->desc.bypass_reg = ldo->base; + ldo->desc.bypass_mask = WM831X_LDO1_SWI; config.dev = pdev->dev.parent; if (pdata) @@ -469,6 +475,8 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev) /* Is it reporting under voltage? */ ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS); + if (ret < 0) + return ret; if (ret & mask) return REGULATOR_STATUS_ERROR; @@ -488,6 +496,8 @@ static struct regulator_ops wm831x_aldo_ops = { .get_mode = wm831x_aldo_get_mode, .set_mode = wm831x_aldo_set_mode, .get_status = wm831x_aldo_get_status, + .set_bypass = regulator_set_bypass_regmap, + .get_bypass = regulator_get_bypass_regmap, .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, @@ -544,6 +554,8 @@ static __devinit int wm831x_aldo_probe(struct platform_device *pdev) ldo->desc.vsel_mask = WM831X_LDO7_ON_VSEL_MASK; ldo->desc.enable_reg = WM831X_LDO_ENABLE; ldo->desc.enable_mask = 1 << id; + ldo->desc.bypass_reg = ldo->base; + ldo->desc.bypass_mask = WM831X_LDO7_SWI; config.dev = pdev->dev.parent; if (pdata) diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 9035dd053611..27c746ef0636 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -120,13 +120,8 @@ static int wm8400_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode) case REGULATOR_MODE_IDLE: /* Datasheet: standby */ - ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, - WM8400_DC1_ACTIVE, 0); - if (ret != 0) - return ret; return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset, - WM8400_DC1_SLEEP, 0); - + WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP, 0); default: return -EINVAL; } diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index 3d7ae4d7fd36..46c0f320ed76 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -74,6 +74,7 @@ enum max77686_regulators { struct max77686_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *of_node; }; enum max77686_opmode { diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index f350fd0ba1df..94514710a03f 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -14,6 +14,7 @@ #define TPS6586X_SLEW_RATE_MASK 0x07 enum { + TPS6586X_ID_SYS, TPS6586X_ID_SM_0, TPS6586X_ID_SM_1, TPS6586X_ID_SM_2, diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index da339fd8c755..c43cd3556b1f 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -177,6 +177,8 @@ int regulator_set_mode(struct regulator *regulator, unsigned int mode); unsigned int regulator_get_mode(struct regulator *regulator); int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); +int regulator_allow_bypass(struct regulator *regulator, bool allow); + /* regulator notifier block */ int regulator_register_notifier(struct regulator *regulator, struct notifier_block *nb); @@ -328,6 +330,12 @@ static inline int regulator_set_optimum_mode(struct regulator *regulator, return REGULATOR_MODE_NORMAL; } +static inline int regulator_allow_bypass(struct regulator *regulator, + bool allow) +{ + return 0; +} + static inline int regulator_register_notifier(struct regulator *regulator, struct notifier_block *nb) { @@ -352,4 +360,11 @@ static inline void regulator_set_drvdata(struct regulator *regulator, #endif +static inline int regulator_set_voltage_tol(struct regulator *regulator, + int new_uV, int tol_uV) +{ + return regulator_set_voltage(regulator, + new_uV - tol_uV, new_uV + tol_uV); +} + #endif diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index bac4c871f3bd..7932a3bf21bd 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -32,6 +32,8 @@ enum regulator_status { REGULATOR_STATUS_NORMAL, REGULATOR_STATUS_IDLE, REGULATOR_STATUS_STANDBY, + /* The regulator is enabled but not regulating */ + REGULATOR_STATUS_BYPASS, /* in case that any other status doesn't apply */ REGULATOR_STATUS_UNDEFINED, }; @@ -58,6 +60,7 @@ enum regulator_status { * regulator_desc.n_voltages. Voltages may be reported in any order. * * @set_current_limit: Configure a limit for a current-limited regulator. + * The driver should select the current closest to max_uA. * @get_current_limit: Get the configured limit for a current-limited regulator. * * @set_mode: Set the configured operating mode for the regulator. @@ -67,6 +70,9 @@ enum regulator_status { * @get_optimum_mode: Get the most efficient operating mode for the regulator * when running with the specified parameters. * + * @set_bypass: Set the regulator in bypass mode. + * @get_bypass: Get the regulator bypass mode state. + * * @enable_time: Time taken for the regulator voltage output voltage to * stabilise after being enabled, in microseconds. * @set_ramp_delay: Set the ramp delay for the regulator. The driver should @@ -133,6 +139,10 @@ struct regulator_ops { unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV, int output_uV, int load_uA); + /* control and report on bypass mode */ + int (*set_bypass)(struct regulator_dev *dev, bool enable); + int (*get_bypass)(struct regulator_dev *dev, bool *enable); + /* the operations below are for configuration of regulator state when * its parent PMIC enters a global STANDBY/HIBERNATE state */ @@ -205,6 +215,8 @@ struct regulator_desc { unsigned int vsel_mask; unsigned int enable_reg; unsigned int enable_mask; + unsigned int bypass_reg; + unsigned int bypass_mask; unsigned int enable_time; }; @@ -221,7 +233,8 @@ struct regulator_desc { * @driver_data: private regulator data * @of_node: OpenFirmware node to parse for device tree bindings (may be * NULL). - * @regmap: regmap to use for core regmap helpers + * @regmap: regmap to use for core regmap helpers if dev_get_regulator() is + * insufficient. * @ena_gpio: GPIO controlling regulator enable. * @ena_gpio_invert: Sense for GPIO enable control. * @ena_gpio_flags: Flags to use when calling gpio_request_one() @@ -253,6 +266,7 @@ struct regulator_dev { int exclusive; u32 use_count; u32 open_count; + u32 bypass_count; /* lists we belong to */ struct list_head list; /* list of all regulators */ @@ -310,6 +324,8 @@ int regulator_disable_regmap(struct regulator_dev *rdev); int regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int old_selector, unsigned int new_selector); +int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable); +int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); diff --git a/include/linux/regulator/fan53555.h b/include/linux/regulator/fan53555.h new file mode 100644 index 000000000000..5c45c85d52ca --- /dev/null +++ b/include/linux/regulator/fan53555.h @@ -0,0 +1,60 @@ +/* + * fan53555.h - Fairchild Regulator FAN53555 Driver + * + * Copyright (C) 2012 Marvell Technology Ltd. + * Yunfan Zhang <yfzhang@marvell.com> + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __FAN53555_H__ + +/* VSEL ID */ +enum { + FAN53555_VSEL_ID_0 = 0, + FAN53555_VSEL_ID_1, +}; + +/* Transition slew rate limiting from a low to high voltage. + * ----------------------- + * Bin |Slew Rate(mV/uS) + * ------|---------------- + * 000 | 64.00 + * ------|---------------- + * 001 | 32.00 + * ------|---------------- + * 010 | 16.00 + * ------|---------------- + * 011 | 8.00 + * ------|---------------- + * 100 | 4.00 + * ------|---------------- + * 101 | 2.00 + * ------|---------------- + * 110 | 1.00 + * ------|---------------- + * 111 | 0.50 + * ----------------------- + */ +enum { + FAN53555_SLEW_RATE_64MV = 0, + FAN53555_SLEW_RATE_32MV, + FAN53555_SLEW_RATE_16MV, + FAN53555_SLEW_RATE_8MV, + FAN53555_SLEW_RATE_4MV, + FAN53555_SLEW_RATE_2MV, + FAN53555_SLEW_RATE_1MV, + FAN53555_SLEW_RATE_0_5MV, +}; + +struct fan53555_platform_data { + struct regulator_init_data *regulator; + unsigned int slew_rate; + /* Sleep VSEL ID */ + unsigned int sleep_vsel_id; +}; + +#endif /* __FAN53555_H__ */ diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 40dd0a394cfa..36adbc82de6a 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -32,6 +32,7 @@ struct regulator; * board/machine. * STATUS: Regulator can be enabled and disabled. * DRMS: Dynamic Regulator Mode Switching is enabled for this regulator. + * BYPASS: Regulator can be put into bypass mode */ #define REGULATOR_CHANGE_VOLTAGE 0x1 @@ -39,6 +40,7 @@ struct regulator; #define REGULATOR_CHANGE_MODE 0x4 #define REGULATOR_CHANGE_STATUS 0x8 #define REGULATOR_CHANGE_DRMS 0x10 +#define REGULATOR_CHANGE_BYPASS 0x20 /** * struct regulator_state - regulator state during low power system states |