diff options
| -rw-r--r-- | drivers/net/arcnet/arcdevice.h | 1 | ||||
| -rw-r--r-- | drivers/net/arcnet/com20020.c | 17 | ||||
| -rw-r--r-- | drivers/net/arcnet/com20020.h | 1 |
3 files changed, 11 insertions, 8 deletions
diff --git a/drivers/net/arcnet/arcdevice.h b/drivers/net/arcnet/arcdevice.h index 4c1c44c85b08..d7fdea11e694 100644 --- a/drivers/net/arcnet/arcdevice.h +++ b/drivers/net/arcnet/arcdevice.h @@ -164,6 +164,7 @@ do { \ #define CONFIGcmd 0x05 /* define configuration */ #define CFLAGScmd 0x06 /* clear flags */ #define TESTcmd 0x07 /* load test flags */ +#define STARTIOcmd 0x18 /* start internal operation */ /* flags for "clear flags" command */ #define RESETclear 0x08 /* power-on-reset */ diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c index d4162750a354..c82f323a8c2b 100644 --- a/drivers/net/arcnet/com20020.c +++ b/drivers/net/arcnet/com20020.c @@ -94,9 +94,9 @@ int com20020_check(struct net_device *dev) int ioaddr = dev->base_addr, status; struct arcnet_local *lp = netdev_priv(dev); - arcnet_outb(0x18 | 0x80, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); udelay(5); - arcnet_outb(0x18 , ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG); mdelay(RESETtime); lp->setup = lp->clockm ? 0 : (lp->clockp << 1); @@ -115,10 +115,10 @@ int com20020_check(struct net_device *dev) /* must now write the magic "restart operation" command */ mdelay(1); - arcnet_outb(0x18, ioaddr, COM20020_REG_W_COMMAND); + arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); } - lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2); + lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG); @@ -132,7 +132,8 @@ int com20020_check(struct net_device *dev) arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status); /* Enable TX */ - arcnet_outb(0x39, ioaddr, COM20020_REG_W_CONFIG); + lp->config |= TXENcfg; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); arcnet_outb(arcnet_inb(ioaddr, 8), ioaddr, COM20020_REG_W_XREG); arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, @@ -211,10 +212,10 @@ int com20020_found(struct net_device *dev, int shared) /* must now write the magic "restart operation" command */ mdelay(1); - arcnet_outb(0x18, ioaddr, COM20020_REG_W_COMMAND); + arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); } - lp->config = 0x20 | (lp->timeout << 3) | (lp->backplane << 2) | 1; + lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; /* Default 0x38 + register: Node ID */ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); @@ -280,7 +281,7 @@ static int com20020_reset(struct net_device *dev, int really_reset) if (really_reset) { /* reset the card */ - arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); udelay(5); arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); mdelay(RESETtime * 2); diff --git a/drivers/net/arcnet/com20020.h b/drivers/net/arcnet/com20020.h index ffb19464b607..22a460f39fb9 100644 --- a/drivers/net/arcnet/com20020.h +++ b/drivers/net/arcnet/com20020.h @@ -86,6 +86,7 @@ struct com20020_dev { /* in the CONFIG register */ #define RESETcfg 0x80 /* put card in reset state */ #define TXENcfg 0x20 /* enable TX */ +#define XTOcfg(x) ((x) << 3) /* extended timeout */ /* in SETUP register */ #define PROMISCset 0x10 /* enable RCV_ALL */ |