diff options
| -rw-r--r-- | Documentation/devicetree/bindings/ufs/ufs-qcom.txt | 58 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt | 11 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufs-qcom.c | 62 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd-pltfrm.c | 98 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd-pltfrm.h | 41 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 10 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.h | 1 |
7 files changed, 207 insertions, 74 deletions
diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt new file mode 100644 index 000000000000..070baf4d7d97 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt @@ -0,0 +1,58 @@ +* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY + +UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro. +Each UFS PHY node should have its own node. + +To bind UFS PHY with UFS host controller, the controller node should +contain a phandle reference to UFS PHY node. + +Required properties: +- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm" + or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use. +- reg : should contain PHY register address space (mandatory), +- reg-names : indicates various resources passed to driver (via reg proptery) by name. + Required "reg-names" is "phy_mem". +- #phy-cells : This property shall be set to 0 +- vdda-phy-supply : phandle to main PHY supply for analog domain +- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply +- clocks : List of phandle and clock specifier pairs +- clock-names : List of clock input name strings sorted in the same + order as the clocks property. "ref_clk_src", "ref_clk", + "tx_iface_clk" & "rx_iface_clk" are mandatory but + "ref_clk_parent" is optional + +Optional properties: +- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply +- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply +- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply +- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply +- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on + +Example: + + ufsphy1: ufsphy@0xfc597000 { + compatible = "qcom,ufs-phy-qmp-20nm"; + reg = <0xfc597000 0x800>; + reg-names = "phy_mem"; + #phy-cells = <0>; + vdda-phy-supply = <&pma8084_l4>; + vdda-pll-supply = <&pma8084_l12>; + vdda-phy-max-microamp = <50000>; + vdda-pll-max-microamp = <1000>; + clock-names = "ref_clk_src", + "ref_clk_parent", + "ref_clk", + "tx_iface_clk", + "rx_iface_clk"; + clocks = <&clock_rpm clk_ln_bb_clk>, + <&clock_gcc clk_pcie_1_phy_ldo >, + <&clock_gcc clk_ufs_phy_ldo>, + <&clock_gcc clk_gcc_ufs_tx_cfg_clk>, + <&clock_gcc clk_gcc_ufs_rx_cfg_clk>; + }; + + ufshc@0xfc598000 { + ... + phys = <&ufsphy1>; + phy-names = "ufsphy"; + }; diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 53579197eca2..03c0e989e020 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -4,11 +4,18 @@ UFSHC nodes are defined to describe on-chip UFS host controllers. Each UFS controller instance should have its own node. Required properties: -- compatible : compatible list, contains "jedec,ufs-1.1" +- compatible : must contain "jedec,ufs-1.1", may also list one or more + of the following: + "qcom,msm8994-ufshc" + "qcom,msm8996-ufshc" + "qcom,ufshc" - interrupts : <interrupt mapping for UFS host controller IRQ> - reg : <registers mapping> Optional properties: +- phys : phandle to UFS PHY node +- phy-names : the string "ufsphy" when is found in a node, along + with "phys" attribute, provides phandle to UFS PHY node - vdd-hba-supply : phandle to UFS host controller supply regulator node - vcc-supply : phandle to VCC supply regulator node - vccq-supply : phandle to VCCQ supply regulator node @@ -54,4 +61,6 @@ Example: clocks = <&core 0>, <&ref 0>, <&iface 0>; clock-names = "core_clk", "ref_clk", "iface_clk"; freq-table-hz = <100000000 200000000>, <0 0>, <0 0>; + phys = <&ufsphy1>; + phy-names = "ufsphy"; }; diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index 329ac846befe..b275a9a3b4d5 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -19,6 +19,7 @@ #include <linux/phy/phy-qcom-ufs.h> #include "ufshcd.h" +#include "ufshcd-pltfrm.h" #include "unipro.h" #include "ufs-qcom.h" #include "ufshci.h" @@ -1036,7 +1037,7 @@ void ufs_qcom_clk_scale_notify(struct ufs_hba *hba) * The variant operations configure the necessary controller and PHY * handshake during initialization. */ -static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { +static struct ufs_hba_variant_ops ufs_hba_qcom_vops = { .name = "qcom", .init = ufs_qcom_init, .exit = ufs_qcom_exit, @@ -1050,4 +1051,63 @@ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { .resume = ufs_qcom_resume, }; +/** + * ufs_qcom_probe - probe routine of the driver + * @pdev: pointer to Platform device handle + * + * Return zero for success and non-zero for failure + */ +static int ufs_qcom_probe(struct platform_device *pdev) +{ + int err; + struct device *dev = &pdev->dev; + + /* Perform generic probe */ + err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops); + if (err) + dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err); + + return err; +} + +/** + * ufs_qcom_remove - set driver_data of the device to NULL + * @pdev: pointer to platform device handle + * + * Always return 0 + */ +static int ufs_qcom_remove(struct platform_device *pdev) +{ + struct ufs_hba *hba = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&(pdev)->dev); + ufshcd_remove(hba); + return 0; +} + +static const struct of_device_id ufs_qcom_of_match[] = { + { .compatible = "qcom,ufshc"}, + {}, +}; + +static const struct dev_pm_ops ufs_qcom_pm_ops = { + .suspend = ufshcd_pltfrm_suspend, + .resume = ufshcd_pltfrm_resume, + .runtime_suspend = ufshcd_pltfrm_runtime_suspend, + .runtime_resume = ufshcd_pltfrm_runtime_resume, + .runtime_idle = ufshcd_pltfrm_runtime_idle, +}; + +static struct platform_driver ufs_qcom_pltform = { + .probe = ufs_qcom_probe, + .remove = ufs_qcom_remove, + .shutdown = ufshcd_pltfrm_shutdown, + .driver = { + .name = "ufshcd-qcom", + .pm = &ufs_qcom_pm_ops, + .of_match_table = of_match_ptr(ufs_qcom_of_match), + }, +}; +module_platform_driver(ufs_qcom_pltform); + MODULE_LICENSE("GPL v2"); diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index 7db9564f507d..9714f2a8b329 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -38,20 +38,7 @@ #include <linux/of.h> #include "ufshcd.h" - -static const struct of_device_id ufs_of_match[]; -static struct ufs_hba_variant_ops *get_variant_ops(struct device *dev) -{ - if (dev->of_node) { - const struct of_device_id *match; - - match = of_match_node(ufs_of_match, dev->of_node); - if (match) - return (struct ufs_hba_variant_ops *)match->data; - } - - return NULL; -} +#include "ufshcd-pltfrm.h" static int ufshcd_parse_clock_info(struct ufs_hba *hba) { @@ -245,10 +232,11 @@ out: * Returns 0 if successful * Returns non-zero otherwise */ -static int ufshcd_pltfrm_suspend(struct device *dev) +int ufshcd_pltfrm_suspend(struct device *dev) { return ufshcd_system_suspend(dev_get_drvdata(dev)); } +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_suspend); /** * ufshcd_pltfrm_resume - resume power management function @@ -257,43 +245,47 @@ static int ufshcd_pltfrm_suspend(struct device *dev) * Returns 0 if successful * Returns non-zero otherwise */ -static int ufshcd_pltfrm_resume(struct device *dev) +int ufshcd_pltfrm_resume(struct device *dev) { return ufshcd_system_resume(dev_get_drvdata(dev)); } +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume); -static int ufshcd_pltfrm_runtime_suspend(struct device *dev) +int ufshcd_pltfrm_runtime_suspend(struct device *dev) { return ufshcd_runtime_suspend(dev_get_drvdata(dev)); } -static int ufshcd_pltfrm_runtime_resume(struct device *dev) +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_suspend); + +int ufshcd_pltfrm_runtime_resume(struct device *dev) { return ufshcd_runtime_resume(dev_get_drvdata(dev)); } -static int ufshcd_pltfrm_runtime_idle(struct device *dev) +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_resume); + +int ufshcd_pltfrm_runtime_idle(struct device *dev) { return ufshcd_runtime_idle(dev_get_drvdata(dev)); } -#else /* !CONFIG_PM */ -#define ufshcd_pltfrm_suspend NULL -#define ufshcd_pltfrm_resume NULL -#define ufshcd_pltfrm_runtime_suspend NULL -#define ufshcd_pltfrm_runtime_resume NULL -#define ufshcd_pltfrm_runtime_idle NULL +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle); + #endif /* CONFIG_PM */ -static void ufshcd_pltfrm_shutdown(struct platform_device *pdev) +void ufshcd_pltfrm_shutdown(struct platform_device *pdev) { ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev)); } +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_shutdown); /** - * ufshcd_pltfrm_probe - probe routine of the driver + * ufshcd_pltfrm_init - probe routine of the driver * @pdev: pointer to Platform device handle + * @vops: pointer to variant ops * * Returns 0 on success, non-zero value on failure */ -static int ufshcd_pltfrm_probe(struct platform_device *pdev) +int ufshcd_pltfrm_init(struct platform_device *pdev, + struct ufs_hba_variant_ops *vops) { struct ufs_hba *hba; void __iomem *mmio_base; @@ -321,19 +313,19 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev) goto out; } - hba->vops = get_variant_ops(&pdev->dev); + hba->vops = vops; err = ufshcd_parse_clock_info(hba); if (err) { dev_err(&pdev->dev, "%s: clock parse failed %d\n", __func__, err); - goto out; + goto dealloc_host; } err = ufshcd_parse_regulator_info(hba); if (err) { dev_err(&pdev->dev, "%s: regulator init failed %d\n", __func__, err); - goto out; + goto dealloc_host; } pm_runtime_set_active(&pdev->dev); @@ -352,50 +344,12 @@ static int ufshcd_pltfrm_probe(struct platform_device *pdev) out_disable_rpm: pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); +dealloc_host: + ufshcd_dealloc_host(hba); out: return err; } - -/** - * ufshcd_pltfrm_remove - remove platform driver routine - * @pdev: pointer to platform device handle - * - * Returns 0 on success, non-zero value on failure - */ -static int ufshcd_pltfrm_remove(struct platform_device *pdev) -{ - struct ufs_hba *hba = platform_get_drvdata(pdev); - - pm_runtime_get_sync(&(pdev)->dev); - ufshcd_remove(hba); - return 0; -} - -static const struct of_device_id ufs_of_match[] = { - { .compatible = "jedec,ufs-1.1"}, - {}, -}; - -static const struct dev_pm_ops ufshcd_dev_pm_ops = { - .suspend = ufshcd_pltfrm_suspend, - .resume = ufshcd_pltfrm_resume, - .runtime_suspend = ufshcd_pltfrm_runtime_suspend, - .runtime_resume = ufshcd_pltfrm_runtime_resume, - .runtime_idle = ufshcd_pltfrm_runtime_idle, -}; - -static struct platform_driver ufshcd_pltfrm_driver = { - .probe = ufshcd_pltfrm_probe, - .remove = ufshcd_pltfrm_remove, - .shutdown = ufshcd_pltfrm_shutdown, - .driver = { - .name = "ufshcd", - .pm = &ufshcd_dev_pm_ops, - .of_match_table = ufs_of_match, - }, -}; - -module_platform_driver(ufshcd_pltfrm_driver); +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init); MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>"); MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>"); diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h new file mode 100644 index 000000000000..df64c4180340 --- /dev/null +++ b/drivers/scsi/ufs/ufshcd-pltfrm.h @@ -0,0 +1,41 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFSHCD_PLTFRM_H_ +#define UFSHCD_PLTFRM_H_ + +#include "ufshcd.h" + +int ufshcd_pltfrm_init(struct platform_device *pdev, + struct ufs_hba_variant_ops *vops); +void ufshcd_pltfrm_shutdown(struct platform_device *pdev); + +#ifdef CONFIG_PM + +int ufshcd_pltfrm_suspend(struct device *dev); +int ufshcd_pltfrm_resume(struct device *dev); +int ufshcd_pltfrm_runtime_suspend(struct device *dev); +int ufshcd_pltfrm_runtime_resume(struct device *dev); +int ufshcd_pltfrm_runtime_idle(struct device *dev); + +#else /* !CONFIG_PM */ + +#define ufshcd_pltfrm_suspend NULL +#define ufshcd_pltfrm_resume NULL +#define ufshcd_pltfrm_runtime_suspend NULL +#define ufshcd_pltfrm_runtime_resume NULL +#define ufshcd_pltfrm_runtime_idle NULL + +#endif /* CONFIG_PM */ + +#endif /* UFSHCD_PLTFRM_H_ */ diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 9e79c33ea897..2ef98346dc6e 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -5348,6 +5348,16 @@ void ufshcd_remove(struct ufs_hba *hba) EXPORT_SYMBOL_GPL(ufshcd_remove); /** + * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA) + * @hba: pointer to Host Bus Adapter (HBA) + */ +void ufshcd_dealloc_host(struct ufs_hba *hba) +{ + scsi_host_put(hba->host); +} +EXPORT_SYMBOL_GPL(ufshcd_dealloc_host); + +/** * ufshcd_set_dma_mask - Set dma mask based on the controller * addressing capability * @hba: per adapter instance diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index ce756266b0af..f2aa47e15b13 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -576,6 +576,7 @@ static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg) } int ufshcd_alloc_host(struct device *, struct ufs_hba **); +void ufshcd_dealloc_host(struct ufs_hba *); int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int); void ufshcd_remove(struct ufs_hba *); |