summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--include/net/mac80211.h4
-rw-r--r--net/mac80211/cfg.c4
-rw-r--r--net/mac80211/mlme.c16
-rw-r--r--net/mac80211/rate.c2
-rw-r--r--net/mac80211/tdls.c70
-rw-r--r--net/mac80211/vht.c15
-rw-r--r--net/rfkill/core.c10
-rw-r--r--net/wireless/reg.c2
8 files changed, 116 insertions, 7 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e3314e516681..bfc569498bfa 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -477,7 +477,9 @@ struct ieee80211_event {
* @chandef: Channel definition for this BSS -- the hardware might be
* configured a higher bandwidth than this BSS uses, for example.
* @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation.
- * This field is only valid when the channel type is one of the HT types.
+ * This field is only valid when the channel is a wide HT/VHT channel.
+ * Note that with TDLS this can be the case (channel is HT, protection must
+ * be used from this field) even when the BSS association isn't using HT.
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
* implies disabled
* @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 685ec13ed7c2..17b1fe961c5d 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2468,6 +2468,10 @@ static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy,
rssi_hyst == bss_conf->cqm_rssi_hyst)
return 0;
+ if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER &&
+ !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI))
+ return -EOPNOTSUPP;
+
bss_conf->cqm_rssi_thold = rssi_thold;
bss_conf->cqm_rssi_hyst = rssi_hyst;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 705ef1d040ed..cd7e55e08a23 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4267,6 +4267,8 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
struct ieee80211_supported_band *sband;
struct cfg80211_chan_def chandef;
int ret;
+ u32 i;
+ bool have_80mhz;
sband = local->hw.wiphy->bands[cbss->channel->band];
@@ -4317,6 +4319,20 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
}
}
+ /* Allow VHT if at least one channel on the sband supports 80 MHz */
+ have_80mhz = false;
+ for (i = 0; i < sband->n_channels; i++) {
+ if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
+ IEEE80211_CHAN_NO_80MHZ))
+ continue;
+
+ have_80mhz = true;
+ break;
+ }
+
+ if (!have_80mhz)
+ ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+
ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
cbss->channel,
ht_cap, ht_oper, vht_oper,
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 9857693b91ec..9ce8883d5f44 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -716,7 +716,7 @@ static bool rate_control_cap_mask(struct ieee80211_sub_if_data *sdata,
/* Filter out rates that the STA does not support */
*mask &= sta->supp_rates[sband->band];
- for (i = 0; i < sizeof(mcs_mask); i++)
+ for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
mcs_mask[i] &= sta->ht_cap.mcs.rx_mask[i];
sta_vht_cap = sta->vht_cap.vht_mcs.rx_mcs_map;
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index aee701a5649e..4e202d0679b2 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -1249,6 +1249,58 @@ static void iee80211_tdls_recalc_chanctx(struct ieee80211_sub_if_data *sdata)
mutex_unlock(&local->chanctx_mtx);
}
+static int iee80211_tdls_have_ht_peers(struct ieee80211_sub_if_data *sdata)
+{
+ struct sta_info *sta;
+ bool result = false;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) {
+ if (!sta->sta.tdls || sta->sdata != sdata || !sta->uploaded ||
+ !test_sta_flag(sta, WLAN_STA_AUTHORIZED) ||
+ !test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH) ||
+ !sta->sta.ht_cap.ht_supported)
+ continue;
+ result = true;
+ break;
+ }
+ rcu_read_unlock();
+
+ return result;
+}
+
+static void
+iee80211_tdls_recalc_ht_protection(struct ieee80211_sub_if_data *sdata,
+ struct sta_info *sta)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ bool tdls_ht;
+ u16 protection = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED |
+ IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT |
+ IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT;
+ u16 opmode;
+
+ /* Nothing to do if the BSS connection uses HT */
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
+ return;
+
+ tdls_ht = (sta && sta->sta.ht_cap.ht_supported) ||
+ iee80211_tdls_have_ht_peers(sdata);
+
+ opmode = sdata->vif.bss_conf.ht_operation_mode;
+
+ if (tdls_ht)
+ opmode |= protection;
+ else
+ opmode &= ~protection;
+
+ if (opmode == sdata->vif.bss_conf.ht_operation_mode)
+ return;
+
+ sdata->vif.bss_conf.ht_operation_mode = opmode;
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
+}
+
int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
const u8 *peer, enum nl80211_tdls_operation oper)
{
@@ -1274,6 +1326,10 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
return -ENOTSUPP;
}
+ /* protect possible bss_conf changes and avoid concurrency in
+ * ieee80211_bss_info_change_notify()
+ */
+ sdata_lock(sdata);
mutex_lock(&local->mtx);
tdls_dbg(sdata, "TDLS oper %d peer %pM\n", oper, peer);
@@ -1287,16 +1343,18 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
iee80211_tdls_recalc_chanctx(sdata);
- rcu_read_lock();
+ mutex_lock(&local->sta_mtx);
sta = sta_info_get(sdata, peer);
if (!sta) {
- rcu_read_unlock();
+ mutex_unlock(&local->sta_mtx);
ret = -ENOLINK;
break;
}
+ iee80211_tdls_recalc_ht_protection(sdata, sta);
+
set_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH);
- rcu_read_unlock();
+ mutex_unlock(&local->sta_mtx);
WARN_ON_ONCE(is_zero_ether_addr(sdata->u.mgd.tdls_peer) ||
!ether_addr_equal(sdata->u.mgd.tdls_peer, peer));
@@ -1318,6 +1376,11 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
ieee80211_flush_queues(local, sdata, false);
ret = sta_info_destroy_addr(sdata, peer);
+
+ mutex_lock(&local->sta_mtx);
+ iee80211_tdls_recalc_ht_protection(sdata, NULL);
+ mutex_unlock(&local->sta_mtx);
+
iee80211_tdls_recalc_chanctx(sdata);
break;
default:
@@ -1335,6 +1398,7 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
&sdata->u.mgd.request_smps_work);
mutex_unlock(&local->mtx);
+ sdata_unlock(sdata);
return ret;
}
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index 834ccdbc74be..ff1c798921a6 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -120,6 +120,7 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap;
struct ieee80211_sta_vht_cap own_cap;
u32 cap_info, i;
+ bool have_80mhz;
memset(vht_cap, 0, sizeof(*vht_cap));
@@ -129,6 +130,20 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
if (!vht_cap_ie || !sband->vht_cap.vht_supported)
return;
+ /* Allow VHT if at least one channel on the sband supports 80 MHz */
+ have_80mhz = false;
+ for (i = 0; i < sband->n_channels; i++) {
+ if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
+ IEEE80211_CHAN_NO_80MHZ))
+ continue;
+
+ have_80mhz = true;
+ break;
+ }
+
+ if (!have_80mhz)
+ return;
+
/*
* A VHT STA must support 40 MHz, but if we verify that here
* then we break a few things - some APs (e.g. Netgear R6300v2
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index f12149a29cb1..b41e9ea2ffff 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -341,7 +341,15 @@ static void __rfkill_switch_all(const enum rfkill_type type, bool blocked)
{
struct rfkill *rfkill;
- rfkill_global_states[type].cur = blocked;
+ if (type == RFKILL_TYPE_ALL) {
+ int i;
+
+ for (i = 0; i < NUM_RFKILL_TYPES; i++)
+ rfkill_global_states[i].cur = blocked;
+ } else {
+ rfkill_global_states[type].cur = blocked;
+ }
+
list_for_each_entry(rfkill, &rfkill_list, node) {
if (rfkill->type != type && type != RFKILL_TYPE_ALL)
continue;
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index b144485946f2..2510b231451e 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2625,7 +2625,7 @@ static void restore_regulatory_settings(bool reset_user)
* settings, user regulatory settings takes precedence.
*/
if (is_an_alpha2(alpha2))
- regulatory_hint_user(user_alpha2, NL80211_USER_REG_HINT_USER);
+ regulatory_hint_user(alpha2, NL80211_USER_REG_HINT_USER);
spin_lock(&reg_requests_lock);
list_splice_tail_init(&tmp_reg_req_list, &reg_requests_list);