diff options
| -rw-r--r-- | arch/arm/mach-s3c2410/Kconfig | 5 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-bast.c | 39 | ||||
| -rw-r--r-- | arch/arm/mach-s3c2410/pm-simtec.c | 65 |
4 files changed, 75 insertions, 35 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 534df0c6c770..d4d03d0daaec 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -154,6 +154,11 @@ config S3C2410_PM_CHECK_CHUNKSIZE the CRC data block will take more memory, but wil identify any faults with better precision. +config PM_SIMTEC + bool + depends on PM && (ARCH_BAST || MACH_VR1000) + default y + config S3C2410_LOWLEVEL_UART_PORT int "S3C2410 UART to use for low-level messages" default 0 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 7c379aad5d62..f99b689e4392 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma.o # Power Management support obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2440 support diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index f3e970039b65..549bcb1f32c0 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -27,6 +27,7 @@ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2006 BJD Updated for __iomem changes * 22-Jun-2006 BJD Added DM9000 platform information + * 28-Jun-2006 BJD Moved pm functionality out to common code */ #include <linux/kernel.h> @@ -67,7 +68,6 @@ #include "devs.h" #include "cpu.h" #include "usb-simtec.h" -#include "pm.h" #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics" @@ -405,44 +405,13 @@ void __init bast_map_io(void) usb_simtec_init(); } -void __init bast_init_irq(void) -{ - s3c24xx_init_irq(); -} - -#ifdef CONFIG_PM - -/* bast_init_machine - * - * enable the power management functions for the EB2410ITX -*/ - -static __init void bast_init_machine(void) -{ - unsigned long gstatus4; - - printk(KERN_INFO "BAST Power Manangement" COPYRIGHT "\n"); - - gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; - gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; - gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); - - __raw_writel(gstatus4, S3C2410_GSTATUS4); - - s3c2410_pm_init(); -} - -#else -#define bast_init_machine NULL -#endif - MACHINE_START(BAST, "Simtec-BAST") MAINTAINER("Ben Dooks <ben@simtec.co.uk>") BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(bast_map_io) - INITIRQ(bast_init_irq) - .init_machine = bast_init_machine, + + .map_io = bast_map_io, + .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c new file mode 100644 index 000000000000..2cb798832223 --- /dev/null +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -0,0 +1,65 @@ +/* linux/arch/arm/mach-s3c2410/pm-simtec.c + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/ + * + * Power Management helpers for Simtec S3C24XX implementations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/map.h> +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> + +#include <asm/mach-types.h> + +#include "pm.h" + +#define COPYRIGHT ", (c) 2005 Simtec Electronics" + +/* pm_simtec_init + * + * enable the power management functions +*/ + +static __init int pm_simtec_init(void) +{ + unsigned long gstatus4; + + /* check which machine we are running on */ + + if (!machine_is_bast() && !machine_is_vr1000()) + return 0; + + printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); + + gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; + gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; + gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); + + __raw_writel(gstatus4, S3C2410_GSTATUS4); + + return s3c2410_pm_init(); +} + +arch_initcall(pm_simtec_init); |